CRISPR/Cas9-mediated knockout of the RDR6 gene in Nicotiana benthamiana for efficient transient expression of recombinant proteins

Improving transient protein expression in agroinfiltrated Nicotiana benthamiana

Agroinfiltration of Nicotiana benthamiana is routinely used in plant science and molecular pharming to transiently express proteins of interest. Here, we discuss four phenomena that should be avoided to improve transient expression. Immune responses can be avoided by depleting immune receptors and employing pathogen-derived effectors; transcript degradation by using silencing inhibitors or RNA interference machinery mutants; endoplasmic reticulum stress by co-expressing chaperones; and protein degradation can be avoided with subcellular targeting, protease mutants and co-expressing protease inhibitors. We summarise the reported increased yields for various recombinant proteins achieved with these approaches and highlight remaining challenges to further improve the efficiency of this versatile protein expression platform.

Recent advances in plant-based bioproduction

Unable to move on their own, plants have acquired the ability to produce a wide variety of low molecular weight compounds to survive against various stresses. It is estimated that there are as many as one million different kinds. Plants also have the ability to accumulate high levels of proteins. Although plant-based bioproduction has traditionally relied on classical tissue culture methods, the attraction of bioproduction by plants is increasing with the development of omics and bioinformatics and other various technologies, as well as synthetic biology. This review describes the current status and prospects of these plant-based bioproduction from five advanced research topics, (i) de novo production of plant-derived high value terpenoids in engineered yeast, (ii) biotransformation of plant-based materials, (iii) genome editing technology for plant-based bioproduction, (iv) environmental effect of metabolite production in plant factory, and (v) molecular pharming.

Developing a multi-modular assembled prime editing (mPE) system improved precise multi-base insertion efficiency in dicots

INTRODUCTION

The Prime Editing (PE) system is a precise and versatile genome editing tool with great potential in plant breeding and plant synthetic biology. However, low PE efficiency severely restricts its application, especially in dicots. PE can introduce small tags to trace target protein or cis-element to regulate gene transcription which is an expertise superior to other gene editing tools. Owing to low efficiency, PE adaption in stably transformed Arabidopsis is lacking.

OBJECTIVES

This study aimed to investigate the issue of low PE efficiency in dicots and develop systematic solutions to improve it. Currently, PE in dicots is undetectable and inconsistent, and this study seeks to address it. Split PE into several parts showed better performance in some target sites in mammal cells. We plan to discover the optimal split PE combination in dicot.

METHODS

We conducted large-scale transformation experiments in dicot model plants Arabidopsis thaliana (At) and Nicotiana benthamiana (Nb) by Agrobacterium-mediated transformation with deep amplicon sequencing (0.2-0.5 million clean total reads).

RESULTS

The editing efficiency decreased upon using a fused reverse transcriptase (RT) or an extended pegRNA separately and further decreased dramatically when these were used together. With the help of the pol II strategy to express PE gRNA (pegRNA), we named the most effective split PE combination as a multi-modular assembled prime editing system (mPE). mPE exhibited improved precise editing efficiency on most gene sites with various editing types, ranging from 1.3-fold to 1288.5-fold and achieved PE on some sites that could not be edited by original PE2. Especially, mPE showed superiority for multi-base insertion with an average improvement of 197.9-fold.

CONCLUSION

The original PE architecture strongly inhibited the cleavage activity of Cas9. Split PE improved PE efficiency extensively and was in favor of introducing small insertions in dicot plants, indicating that different PE variants might have their own expertise.

A novel ilarvirus protein CP-RT is expressed via stop codon readthrough and suppresses RDR6-dependent RNA silencing

Ilarviruses are a relatively understudied but important group of plant RNA viruses that includes a number of crop pathogens. Their genomes comprise three RNA segments encoding two replicase subunits, movement protein, coat protein (CP), and (in some ilarvirus subgroups) a protein that suppresses RNA silencing. Here we report that, in many ilarviruses, RNA3 encodes an additional protein (termed CP-RT) as a result of ribosomal readthrough of the CP stop codon into a short downstream readthrough (RT) ORF. Using asparagus virus 2 as a model, we find that CP-RT is expressed in planta where it functions as a weak suppressor of RNA silencing. CP-RT expression is essential for persistent systemic infection in leaves and shoot apical meristem. CP-RT function is dependent on a putative zinc-finger motif within RT. Replacing the asparagus virus 2 RT with the RT of an ilarvirus from a different subgroup restored the ability to establish persistent infection. These findings open up a new avenue for research on ilarvirus silencing suppression, persistent meristem invasion and vertical transmission.

CRISPR/Cas9-gene editing approaches in plant breeding

CRISPR/Cas9 gene editing system is recently developed robust genome editing technology for accelerating plant breeding. Various modifications of this editing system have been established for adaptability in plant varieties as well as for its improved efficiency and portability. This review provides an in-depth look at the various strategies for synthesizing gRNAs for efficient delivery in plant cells, including chemical synthesis and in vitro transcription. It also covers traditional analytical tools and emerging developments in detection methods to analyze CRISPR/Cas9 mediated mutation in plant breeding. Additionally, the review outlines the various analytical tools which are used to detect and analyze CRISPR/Cas9 mediated mutations, such as next-generation sequencing, restriction enzyme analysis, and southern blotting. Finally, the review discusses emerging detection methods, including digital PCR and qPCR. Hence, CRISPR/Cas9 has great potential for transforming agriculture and opening avenues for new advancements in the system for gene editing in plants.

Green Biologics: Harnessing the Power of Plants to Produce Pharmaceuticals

Plants are increasingly used for the production of high-quality biological molecules for use as pharmaceuticals and biomaterials in industry. Plants have proved that they can produce life-saving therapeutic proteins (Elelyso™-Gaucher's disease treatment, ZMapp™-anti-Ebola monoclonal antibodies, seasonal flu vaccine, Covifenz™-SARS-CoV-2 virus-like particle vaccine); however, some of these therapeutic proteins are difficult to bring to market, which leads to serious difficulties for the manufacturing companies. The closure of one of the leading companies in the sector (the Canadian biotech company Medicago Inc., producer of Covifenz) as a result of the withdrawal of investments from the parent company has led to the serious question: What is hindering the exploitation of plant-made biologics to improve health outcomes? Exploring the vast potential of plants as biological factories, this review provides an updated perspective on plant-derived biologics (PDB). A key focus is placed on the advancements in plant-based expression systems and highlighting cutting-edge technologies that streamline the production of complex protein-based biologics. The versatility of plant-derived biologics across diverse fields, such as human and animal health, industry, and agriculture, is emphasized. This review also meticulously examines regulatory considerations specific to plant-derived biologics, shedding light on the disparities faced compared to biologics produced in other systems.

Multiplex Cas9-based excision of CLCuV betasatellite and DNA-A revealed reduction of viral load with asymptomatic cotton plants

MAIN CONCLUSION

Multiplexed Cas9-based genome editing of cotton resulted in reduction of viral load with asymptomatic cotton plants. In depth imaging of proteomic dynamics of resulting CLCuV betasatellite and DNA-A protein was also performed. The notorious  cotton leaf curl virus (CLCuV), which is transmitted by the sap-sucking insect whitefly, continuously damages cotton crops. Although the application of various toxins and RNAi has shown some promise, sustained control has not been achieved. Consequently, CRISPR_Cas9 was applied by designing multiplex targets against DNA-A (AC2 and AC3) and betasatellite (βC1) of CLCuV using CRISPR direct and ligating into the destination vector of the plant using gateway ligation method. The successful ligation of targets into the destination vector was confirmed by the amplification of 1049 bp using a primer created from the promoter and target, while restriction digestion using the AflII and Asc1 enzymes determined how compact the plasmid developed and the nucleotide specificity of the plasmid was achieved through Sanger sequencing. PCR confirmed the successful introduction of plasmid into CKC-1 cotton variety. Through Sanger sequencing and correlation with the mRNA expression of DNA-A and betasatellite in genome-edited cotton plants subjected to agroinfiltration of CLCuV infectious clone, the effectiveness of knockout was established. The genome-edited cotton plants demonstrated edited efficacy of 72% for AC2 and AC3 and 90% for the (βC1) through amplicon sequencing, Molecular dynamics (MD) simulations were used to further validate the results. Higher RMSD values for the edited βC1 and AC3 proteins indicated functional loss caused by denaturation. Thus, CRISPR_Cas9 constructs can be rationally designed using high-throughput MD simulation technique. The confidence in using this technology to control plant virus and its vector was determined by the knockout efficiency and the virus inoculation assay.

Seed transmission of raspberry bushy dwarf virus is blocked in Nicotiana benthamiana plants by preventing virus entry into the embryo from the infected embryo sac and endosperm

Raspberry bushy dwarf virus (RBDV) is transmitted through seed in infected red raspberry plants after pollination with pollen grains from healthy red raspberry plants. Here, we show that RBDV is not transmitted through seeds in infected Nicotiana benthamiana (Nb) plants after pollination with virus-free Nb pollen grains. Chromogenic in situ hybridization revealed that the virus invades the shoot apical meristem and the ovule, including the embryo sac, of RBDV-infected Nb plants; however, in seeds that developed from infected embryo sacs after fertilization by virus-free sperm cells, RBDV was absent in the embryos and present in the endosperms. When we analyzed seed transmission of RBDV in Nb mutants with mutations in dicer-like enzyme 2 and 4 (NbDCL2&4) or RNA-dependent RNA polymerase 6 (NbRDR6), RBDV was not present in the offspring from seeds with embryos and endosperms that did not express NbDCL2&4 or NbRDR6. These results suggest that seed transmission of RBDV is prevented by evasion of infection by the embryo and that RNA silencing is not essential for preventing seed transmission of RBDV in Nb plants.

Differential Effects of RNA-Dependent RNA Polymerase 6 (RDR6) Silencing on New and Old World Begomoviruses in Nicotiana benthamiana

RNA-dependent RNA polymerases (RDRs) are key players in the antiviral defence mediated by RNA silencing in plants. RDR6 is one of the major components of the process, regulating the infection of certain RNA viruses. To better clarify its function against DNA viruses, we analyzed the effect of RDR6 inactivation (RDR6i) in N. benthamiana plants on two phloem-limited begomoviruses, the bipartite Abutilon mosaic virus (AbMV) and the monopartite tomato yellow leaf curl Sardinia virus (TYLCSV). We observed exacerbated symptoms and DNA accumulation for the New World virus AbMV in RDR6i plants, varying with the plant growth temperature (ranging from 16 °C to 33 °C). However, for the TYLCSV of Old World origin, RDR6 depletion only affected symptom expression at elevated temperatures and to a minor extent; it did not affect the viral titre. The accumulation of viral siRNA differed between the two begomoviruses, being increased in RDR6i plants infected by AbMV but decreased in those infected by TYLCSV compared to wild-type plants. In situ hybridization revealed a 6.5-fold increase in the number of AbMV-infected nuclei in RDR6i plants but without egress from the phloem tissues. These results support the concept that begomoviruses adopt different strategies to counteract plant defences and that TYLCSV evades the functions exerted by RDR6 in this host.

Functional Characterization of TkSRPP Promoter in Response to Hormones and Wounding Stress in Transgenic Tobacco

Taraxacum kok-saghyz is a model species for studying natural rubber biosynthesis because its root can produce high-quality rubber. Small rubber particle protein (SRPP), a stress-related gene to multiple stress responses, involves in natural rubber biosynthesis. To investigate the transcriptional regulation of the TkSRPP promoter, the full-length promoter PR0 (2188 bp) and its four deletion derivatives, PR1 (1592 bp), PR2 (1274 bp), PR3 (934 bp), and PR4 (450 bp), were fused to β-glucuronidase (GUS) reporter gene and transformed into tobacco. The GUS tissue staining showed that the five promoters distinctly regulated GUS expression utilizing transient transformation of tobacco. The GUS activity driven by a PR0 promoter was detected in transgenic tobacco leaves, stem and roots, suggesting that the TkSRPP promoter was not tissue-specific. Deletion analyses in transgenic tobacco have demonstrated that the PR3 from -934 bp to -450 bp core region responded strongly to the hormones, methyl jasmonate (MeJA), abscisic acid (ABA), and salicylic acid (SA), and also to injury induction. The TkSRPP gene was highly expressed under hormones and wound-induced conditions. This study reveals the regulation pattern of the SRPP promoter, and provides valuable information for studying natural rubber biosynthesis under hormones and wounding stress.

Effect of the At-CDC27a gene on Nicotiana benthamiana phenotype and accumulation of recombinant proteins

In this study the anaphase promoting complex subunit CDC27a from Arabidopsis thaliana was introduced in the genome of Nicotiana benthamiana by Agrobacterium tumefaciens. The presence of the At-CDC27a gene facilitates plant biomass production. Compared to wild type N. benthamiana the leaf mass fraction of the best performing transgenic line At-CDC27a-29 was increased up to 154%. The positive effect of the At-CDC27a expression on leaf biomass accumulation was accompanied by an enlarged total leaf area. Furthermore, the ectopic expression of the At-CDC27a also affected cellular conditions for the production of foreign proteins delivered by the TRBO vector. In comparison to the non-transgenic control, the protein accumulation in the At-CDC27a-29 plant host increased up to 146% for GFP and up to 181% for scFv-TM43-E10. Collectively, the modified N. benthamiana plants developed in this study might be useful to improve the yield of recombinant proteins per biomass unit in closed facilities.

Increased rates of gene-editing events using a simplified RNAi configuration designed to reduce gene silencing

An optimal RNAi configuration that could restrict gene expression most efficiently was determined. This approach was also used to target PTGS and yielded higher rates of gene-editing events. Although it was characterized long ago, transgene silencing still strongly impairs transgene overexpression, and thus is a major barrier to plant crop gene-editing. The development of strategies that could prevent transgene silencing is therefore essential to the success of gene editing assays. Transgene silencing occurs via the RNA silencing process, which regulates the expression of essential genes and protects the plant from viral infections. The RNA silencing machinery thereby controls central biological processes such as growth, development, genome integrity, and stress resistance. RNA silencing is typically induced by aberrant RNA, that may lack 5' or 3' processing, or may consist in double-stranded or hairpin RNA, and involves DICER and ARGONAUTE family proteins. In this study, RNAi inducing constructs were designed in eleven different configurations and were evaluated for their capacity to induce silencing in Nicotiana spp. using transient and stable transformation assays. Using reporter genes, it was found that the overexpression of a hairpin consisting of a forward tandem inverted repeat that started with an ATG and that was not followed downstream by a transcription terminator, could downregulate gene expression most potently. Furthermore, using this method, the downregulation of the NtSGS3 gene caused a significant increase in transgene expression both in transient and stable transformation assays. This SGS3 silencing approach was also employed in gene-editing assays and caused higher rates of gene-editing events. Taken together, these findings suggested the optimal genetic configuration to cause RNA silencing and showed that this strategy may be used to restrict PTGS during gene-editing experiments.

CRISPR/Cas9-mediated knockout of a prolyl-4-hydroxylase subfamily in Nicotiana benthamiana using DsRed2 for plant selection

The properties of host plants used for molecular farming can be modified by CRISPR/Cas9 genome editing to improve the quality and yield of recombinant proteins. However, it is often necessary to target multiple genes simultaneously, particularly when using host plants with large and complex genomes. This is the case for Nicotiana benthamiana, an allotetraploid relative of tobacco frequently used for transient protein expression. A multiplex genome editing system incorporating the DsRed2 fluorescent marker for the identification and selection of transgenic plants was established. As proof of principle, NbP4H4 was targeted encoding a prolyl-4-hydroxylase involved in protein O-linked glycosylation. Using preselected gRNAs with efficiencies confirmed by transient expression, transgenic plant lines with knockout mutations in all four NbP4H4 genes were obtained. Leaf fluorescence was then used to screen for the absence of the SpCas9 transgene in T1 plants, and transgene-free lines with homozygous or biallelic mutations were identified. The analysis of plant-produced recombinant IgA1 as a reporter protein revealed changes in the number of peptides containing hydroxyproline residues and pentoses in the knockout plants. The selection of efficient gRNAs combined with the DsRed2 marker reduces the effort needed to generate N. benthamiana mutants and simplifies the screening processes to obtain transgene-free progeny.

CRISPR/Cas9-mediated knockout of the DCL2 and DCL4 genes in Nicotiana benthamiana and its productivity of recombinant proteins

KEY MESSAGE

DCL2 and DCL4 genes in Nicotiana benthamiana plants were successfully edited using the CRISPR/Cas9 system. Recently, plants have been utilized for recombinant protein production similar to other expression systems, i.e., bacteria, yeast, insect, and mammal cells. However, insufficient amounts of recombinant proteins are often produced in plant cells. The repression of RNA silencing within plant cells could improve production levels of recombinant protein because RNA silencing frequently decomposes mRNAs from transgenes. In this study, the genes dicer-like protein 2 and 4 (NbDCL2 and NbDCL4) were successfully edited to produce double-knockout transgenic Nicotiana benthamiana plants (dcl2dcl4 plants) using clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 technology. A transient green fluorescent protein (GFP) gene expression assay revealed that the dcl2dcl4 plants accumulated higher amounts of GFP and GFP mRNA than wild type (WT) and RNA-dependent RNA polymerase 6-knockout N. benthamiana plants (ΔRDR6 plants). Small RNA sequencing also showed that dcl2dcl4 plants accumulated lower amounts of small interfering RNAs (siRNAs) against the GFP gene than WT plants. The dcl2dcl4 plants might also produce higher amounts of human fibroblast growth factor 1 (FGF1) than WT and ΔRDR6 plants. These observations appear to reflect differences between DCLs and RDR6 in plant cell biological mechanisms. These results reveal that dcl2dcl4 plants would be suitable as platform plants for recombinant protein production.

Improving Protein Quantity and Quality—The Next Level of Plant Molecular Farming

Plants offer several unique advantages in the production of recombinant pharmaceuticals for humans and animals. Although numerous recombinant proteins have been expressed in plants, only a small fraction have been successfully put into use. The hugely distinct expression systems between plant and animal cells frequently cause insufficient yield of the recombinant proteins with poor or undesired activity. To overcome the issues that greatly constrain the development of plant-produced pharmaceuticals, great efforts have been made to improve expression systems and develop alternative strategies to increase both the quantity and quality of the recombinant proteins. Recent technological revolutions, such as targeted genome editing, deconstructed vectors, virus-like particles, and humanized glycosylation, have led to great advances in plant molecular farming to meet the industrial manufacturing and clinical application standards. In this review, we discuss the technological advances made in various plant expression platforms, with special focus on the upstream designs and milestone achievements in improving the yield and glycosylation of the plant-produced pharmaceutical proteins.

CRISPR/Cas9-Mediated Genome Editing System in Insect Genomics and Pest Management

The CRISPR/Cas9 is being developed as an invaluable system that allows rapid and site-specific genome editing in a wide variety of organisms, including diverse insects. It has been successfully used for gene function annotations of RNAi pathway in insect genomics and will facilitate research on RNAi mechanism. Here, we describe a streamlined method to generate and detect somatic and germline knockout mutations of desired target genes in tephritid pests by injecting mRNA encoding the Cas9 endonuclease and in vitro transcribed single guide RNA (sgRNA) into embryos. Target site selection, sgRNA synthesis, Cas9 synthesis, microinjection, and mutation identification are presented in detail.

Evaluation of methods for plant genomic DNA sequence analysis without DNA and PCR product purification

Genome-editing technologies are widely used to characterize gene functions and improve the features of agricultural plants. Although sequence analysis of gene editing target DNA is the most reliable method of screening gene-edited plants, the current DNA sequence analysis methods are time consuming and labor intensive because they include genomic DNA and polymerase chain reaction (PCR) product purification. In this study, seven methods were performed for sequence analysis of plant genomic DNA with and/or without genomic DNA and PCR product purification. Consequently, good-quality sequencing chromatograms were obtained using all methods. Results showed that the partial genomic DNA sequence of Nicotiana benthamiana and Arabidopsis thaliana could be sufficiently analyzed without plant genomic DNA and PCR product purification. Furthermore, screening of gene-edited N. benthamiana was successful using the present methods. Therefore, the tested methods could reduce the time, simplify the workflow of plant gene analysis, and help in screening gene-edited plants.

CRISPeering: Bioengineering the Host Cells through CRISPR-Cas9 Genome Editing System as the Next-Generation of Cell Factories

BACKGROUND

Nowadays, CRISPR-Cas9 genome editing system has become a popular bioengineering-based tool for various applications. Owing to its high-target specificity, efficiency, versatility and simplicity, it has gained attraction as a robust tool for molecular biology research, which unveils the biological functions of unstudied genes. As well as engineering the metabolic pathways. Chinese hamster ovary (CHO) cells, and Escherichia coli, are regarded as the most commonly used expression platforms for industrial-scale production of recombinant proteins. The immergence of CRISPR-Cas9 genome editing system, will promote the current status of expression hosts towards controllable and predictable strains.

OBJECTIVES

Here, I present the current status of expression hosts for biopharmaceuticals production. Some major accomplishments in utilization of CRISPR-Cas9 genome editing tool in different prokaryotic and eukaryotic system will be discussed and more importantly the future directions of this newly arrived technology to make the next-generation cell factories with improved or novel properties will be suggested. Besides, the challenges facing with recent patents on this field is discussed as well.

RESULTS AND CONCLUSION

The CRISPR-Cas9 genome-editing tool has been adopted to be utilized in some major expression platforms. CRISPeering has been successfully employed for genome editing in different prokaryotic and eukaryotic host cells. The immergence of systems metabolic engineering, systems biology and synthetic biology will fortify the current situation of CRISPR-Cas9 genome editing system.

Targeted genome editing of plants and plant cells for biomanufacturing

Plants have provided humans with useful products since antiquity, but in the last 30 years they have also been developed as production platforms for small molecules and recombinant proteins. This initially niche area has blossomed with the growth of the global bioeconomy, and now includes chemical building blocks, polymers and renewable energy. All these applications can be described as “plant molecular farming” (PMF). Despite its potential to increase the sustainability of biologics manufacturing, PMF has yet to be embraced broadly by industry. This reflects a combination of regulatory uncertainty, limited information on process cost structures, and the absence of trained staff and suitable manufacturing capacity. However, the limited adaptation of plants and plant cells to the requirements of industry-scale manufacturing is an equally important hurdle. For example, the targeted genetic manipulation of yeast has been common practice since the 1980s, whereas reliable site-directed mutagenesis in most plants has only become available with the advent of CRISPR/Cas9 and similar genome editing technologies since around 2010. Here we summarize the applications of new genetic engineering technologies to improve plants as biomanufacturing platforms. We start by identifying current bottlenecks in manufacturing, then illustrate the progress that has already been made and discuss the potential for improvement at the molecular, cellular and organism levels. We discuss the effects of metabolic optimization, adaptation of the endomembrane system, modified glycosylation profiles, programmable growth and senescence, protease inactivation, and the expression of enzymes that promote biodegradation. We outline strategies to achieve these modifications by targeted gene modification, considering case-by-case examples of individual improvements and the combined modifications needed to generate a new general-purpose “chassis” for PMF.

Genome Editing and Protoplast Regeneration to Study Plant-Pathogen Interactions in the Model Plant Nicotiana benthamiana

Biotic diseases cause substantial agricultural losses annually, spurring research into plant pathogens and strategies to mitigate them. Nicotiana benthamiana is a commonly used model plant for studying plant-pathogen interactions because it is host to numerous plant pathogens and because many research tools are available for this species. The clustered regularly interspaced short palindromic repeats (CRISPR) system is one of several powerful tools available for targeted gene editing, a crucial strategy for analyzing gene function. Here, we demonstrate the use of various CRISPR-associated (Cas) proteins for gene editing of N. benthamiana protoplasts, including Staphylococcus aureus Cas9 (SaCas9), Streptococcus pyogenes Cas9 (SpCas9), Francisella novicida Cas12a (FnCas12a), and nCas9-activation-induced cytidine deaminase (nCas9-Target-AID). We successfully mutated Phytoene Desaturase (PDS) and Ethylene Receptor 1 (ETR1) and the disease-associated genes RNA-Dependent RNA Polymerase 6 (RDR6), and Suppressor of Gene Silencing 3 (SGS3), and confirmed that the mutated alleles were transmitted to progeny. sgs3 mutants showed the expected phenotype, including absence of trans-acting siRNA3 (TAS3) siRNA and abundant expression of the GFP reporter. Progeny of both sgs3 and rdr6 null mutants were sterile. Our analysis of the phenotypes of the regenerated progeny indicated that except for the predicted phenotypes, they grew normally, with no unexpected traits. These results confirmed the utility of gene editing followed by protoplast regeneration in N. benthamiana. We also developed a method for in vitro flowering and seed production in N. benthamiana, allowing the regenerants to produce progeny in vitro without environmental constraints.

Current status and prospects of plant genome editing in Australia

Plant genome editing, particularly CRISPR-Cas biotechnologies, has rapidly evolved and drawn enormous attention all around the world in the last decade. The cutting-edge technologies have had substantial impact on precise genome editing for manipulating gene expression, stacking gene mutations, and improving crop agronomic traits. Following the global trends, investigations on CRISPR-Cas have been thriving in Australia, especially in agriculture sciences. Importantly, CRISPR-edited plants, classified as SDN-1 organisms (SDN: site-directed nuclease), have been given a green light in Australia, with regulatory bodies indicating they will not be classified as a genetically modified organism (GMO) if no foreign DNA is present in an edited plant. As a result, genome-edited products would not attract the onerous regulation required for the introduction of a GMO, which could mean more rapid deployment of new varieties and products that could be traded freely in Australia, and potentially to export markets. In the present review, we discuss the current status and prospects of plant genome editing in Australia by highlighting several species of interest. Using these species as case studies, we discuss the priorities and potential of plant genome editing, as well as the remaining challenges.

At-CycD2 Enhances Accumulation of Above-Ground Biomass and Recombinant Proteins in Transgenic Nicotiana benthamiana Plants

Transient expression in Nicotiana benthamiana holds great potential for recombinant protein manufacturing due to its advantages in terms of speed and yield compared to stably transformed plants. To continue improving the quantity of recombinant proteins the plant host will need to be modified at both plant and cellular levels. In attempt to increase leaf mass fraction, we transformed N. benthamiana with the At-CycD2 gene, a positive regulator of the cell cycle. Phenotypic characterization of the T₁ progeny plants revealed their accelerated above-ground biomass accumulation and enhanced rate of leaf initiation. In comparison to non-transgenic control the best performing line At-CycD2-15 provided 143 and 140% higher leaf and stem biomass fractions, respectively. The leaf area enlargement of the At-CycD2-15 genotype was associated with the increase of epidermal cell number compensated by slightly reduced cell size. The production capacity of the At-CycD2-15 transgenic line was superior to that of the non-transgenic N. benthamiana. The accumulation of transiently expressed GFP and scFv-TM43-E10 proteins per unit biomass was increased by 138.5 and 156.7%, respectively, compared to the wild type. With these results we demonstrate the potential of cell cycle regulator gene At-CycD2 to modulate both plant phenotype and intracellular environment of N. benthamiana for enhanced recombinant protein yield.

Cyanobacterial Production of Biopharmaceutical and Biotherapeutic Proteins

Efforts to express human therapeutic proteins in photosynthetic organisms have been described in the literature. Regarding microalgae, most of the research entailed a heterologous transformation of the chloroplast, but transformant cells failed to accumulate the desired recombinant proteins in high quantity. The present work provides methods and DNA construct formulations for over-expressing in photosynthetic cyanobacteria, at the protein level, human-origin bio-pharmaceutical and bio-therapeutic proteins. Proof-of-concept evidence is provided for the design and reduction to practice of "fusion constructs as protein overexpression vectors" for the generation of the bio-therapeutic protein interferon alpha-2 (IFN). IFN is a member of the Type I interferon cytokine family, well-known for its antiviral and anti-proliferative functions. Fusion construct formulations enabled accumulation of IFN up to 12% of total cellular protein in soluble form. In addition, the work reports on the isolation and purification of the fusion IFN protein and preliminary verification of its antiviral activity. Combining the expression and purification protocols developed here, it is possible to produce fairly large quantities of interferon in these photosynthetic microorganisms, generated from sunlight, CO₂, and H₂O.

The virological model plant, Nicotiana benthamiana expresses a single functional RDR6 homeolog

The RNA dependent RNA polymerase, RDR6 is involved in a variety of processes including the biogenesis of endogenous regulatory small RNAs, maintaining post-transcriptional gene silencing of transgenes and establishing efficient antiviral RNA silencing. In the virological model plant, Nicotiana benthamiana, functional studies of RDR6 has so far only been depended on RNAi based methodologies. These techniques however have inherent limitations, especially in the context of antiviral RNA silencing. To overcome this issue, we created rdr6 mutant N. benthamiana by the CRISPR/Cas9 genome editing system. Using the mutant, most of the proposed functions of RDR6 was confirmed. Additionally, the rdr6 N. benthamiana plant recapitulated closely the phenotype of the equivalent Arabidopsis mutant. In summary, the rdr6 N. benthamiana described here may be employed as a model system not only for the better understanding of the role of RDR6 in pathogen elicited immune responses but in various developmental processes as well.