The fluorescence mechanism of carbon dots, and methods for tuning their emission color: a review

Evaluation of phthalic acid tri-ethylene diamine (TED) and folic acid-based carbon quantum dots for the detection of heavy metals in water resources using fibre-optic instrumentation

Heavy metal pollution and toxicity from water resources have remained a great concern for the entire population. This research demonstrates the capability of carbon quantum dots (CQDs) for fluorescence-based heavy metal detection in different water resources using a fibre-optic spectrometer device. Two different types of CQDs phthalic acid and triethylenediamine (PT CQDs) and Folic acid (FCQDs) were synthesized using microwave irradiation and hydrothermal method, respectively. CQDs were characterized using several techniques such as TEM, EDX, XPS and FTIR. PTCQD and FCQDs both were tested for sensing capability in water reservoirs like household and river water. The results indicate that both CQDs were able to detect all six heavy metal ions (Pb2+, Co2+, Mn3+, Hg2+, Ni2+, Cr3+) tested in the study in the range of 0-100 µM. It was found that FCQDs show a three-fold higher sensitivity and greater resolution than PTCQDs for all the heavy metals samples. The CQDs' sensing capability shows that they can achieve a limit of detection in the range of 0.15-3 µM along with 100% accuracy in terms of recovery with minimal error, these results indicate that both CQDs have a tremendous potential to be used as a sensor for the detection of heavy metals even in complex water matrices. FCQDs show more sensitivity for all metals compared to PTCQDs and used in future as a sensing tool for heavy metal detection with better sensitivity and accuracy with less response time.

One-step solvothermal synthesis of full-color fluorescent carbon dots for information encryption and anti-counterfeiting applications

Multicolor fluorescent carbon dots (CDs) have received extensive attention due to their excellent fluorescence tunable performance. In this study, multicolor CDs with color tunable and high fluorescence quantum yields (QYs) were successfully prepared under the same conditions by a one-step solvothermal method using 2-aminoterephthalic acid (ATA) and Nile Blue A (NBA) as reaction reagents, achieving a wide color field coverage. Detailed studies on the relevant mechanisms have been carried out for blue, green and red CDs, indicating that the regulating mechanism of multicolor luminescence is determined by the size of the sp2 conjugated domains, which is due to the increase of particle size that causes an increase in the size of the sp2 conjugated domains, resulting in the narrowing of the band gap and the red-shift of the emission wavelength. It was found that the CDs have the advantages of simple preparation, high photostability and high quantum yield. They were used as fluorescent ink and mixed with polyvinyl alcohol (PVA) to form CD/PVA composites, which were successfully applied in the field of information encryption and anti-counterfeiting. This work provides a new strategy for the synthesis of panchromatic tunable fluorescent CDs and their application in the field of information encryption and anti-counterfeiting.

A minireview on the utilization of petroleum coke as a precursor for carbon-based nanomaterials (CNMs): perspectives and potential applications

The remarkable properties of carbon-based nanomaterials (CNMs) have stimulated a significant increase in studies on different 0D, 1D and 2D nanostructures, which have promising applications in various fields of science and technology. However, the use of graphite as a raw material, which is essential for their production, limits the scalability of these nanostructures. In this context, petroleum coke (PC), a by-product of the coking process in petrochemical industry with a high carbon content (>80 wt%), is emerging as an attractive and low-cost option for the synthesis of carbonaceous nanostructures. This brief review presents recent research related to the use of PC as a precursor for CNMs, such as graphene and its oxidized (GO) and reduced (RGO) variants, among other carbon-based nanostructures. The work highlights the performance of these materials in specific areas of application. In addition, this review describes and analyzes strategies for transforming low-cost, environmentally friendly waste into advanced technological innovations with greater added value, in line with the UN's 2030 Agenda.

Graphene-Based Photodynamic Therapy and Overcoming Cancer Resistance Mechanisms: A Comprehensive Review

Photodynamic therapy (PDT) is a non-invasive therapy that has made significant progress in treating different diseases, including cancer, by utilizing new nanotechnology products such as graphene and its derivatives. Graphene-based materials have large surface area and photothermal effects thereby making them suitable candidates for PDT or photo-active drug carriers. The remarkable photophysical properties of graphene derivates facilitate the efficient generation of reactive oxygen species (ROS) upon light irradiation, which destroys cancer cells. Surface functionalization of graphene and its materials can also enhance their biocompatibility and anticancer activity. The paper delves into the distinct roles played by graphene-based materials in PDT such as photosensitizers (PS) and drug carriers while at the same time considers how these materials could be used to circumvent cancer resistance. This will provide readers with an extensive discussion of various pathways contributing to PDT inefficiency. Consequently, this comprehensive review underscores the vital roles that graphene and its derivatives may play in emerging PDT strategies for cancer treatment and other medical purposes. With a better comprehension of the current state of research and the existing challenges, the integration of graphene-based materials in PDT holds great promise for developing targeted, effective, and personalized cancer treatments.

Heteroatoms-doped carbon dots as dual probes for heavy metal detection

The utilization of l-cysteine in hydrothermal synthesis allows for the manufacture of carbon dots (CDs) that are doped with heteroatoms including oxygen, nitrogen, and sulfur (N, S, O-doped CDs). CDs have a particle size ranging from 1 to 3 nm, with an average particle size of 2.5 nm. N, S, and O-doped CDs display a blue fluorescence emission at a wavelength of 425 nm. It shows a reliance on the specific excitation wavelength between 320 and 500 nm. It has a selective quenching effect specifically with copper (Cu2+) ions when exposed to interactions with heavy metal ions, as compared to other metal ions. The assay has a limit of detection (LOD) of 2 μM and exhibits a linear correlation within the concentration range of 10-33.3 μM. The fluorescence mechanism was elucidated by employing various analytical techniques, such as transmission electron microscopy (TEM), high-resolution TEM , UV-Vis spectroscopy, zeta potential analysis, and conductometry. An analysis of the data reveals that Cu2+ ions exhibit a strong attraction to the external surface of N, S, and O-doped CDs, leading to the formation of aggregates. N, S, and O-doped CDs can be also used as probes for electrochemical investigations utilizing cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) to produce Nyquist and Bode plots. The electrochemical results offer substantiation for the interaction between Cu2+ ions and N, S, and O-doped CDs. Zero-dimensional carbon nanomaterials, i.e. CDs, can improve the detection of heavy metals using optical and electrochemical methods.

Deuteration-Induced Energy Level Structure Reconstruction of Carbon Dots for Enhancing Photoluminescence

Constrained by a limited understanding of the structure and luminescence mechanisms of carbon dots (CDs), achieving precise enhancement of their photoluminescence (PL) performance without altering the emission wavelength and color remains a challenge. In this work, a deuterated CD is first achieved by simply replacing the reaction solvent from H2O to D2O. The substitution of D atoms for H atoms is not limited on the surface but also within the internal structure of CDs. Deuteration affects the formation of the π-conjugated network structure by altering the content of sp2 carbon and sp3 carbon, ultimately inducing a reconstruction for energy level structure of CDs. Both the intrinsic state and surface state emission, including quantum yield, emission intensity and lifetime, are significantly enhanced after deuteration. It benefits from the reduction in non-radiative transitions, since the lowered vibrational frequencies of D atoms and optimized local energy level distribution in CDs structure. The deuterated CDs are applied in the fabrication of white-light-emitting diodes to show their application potential. This work provides a highly versatile route for improving and controlling photoluminescence performance of CDs and has opportunities to guide the development of CDs for practical applications.

Enabling white color tunability in complex 3D-printed composites by using lead-free self-trapped exciton 2D perovskite/carbon quantum dot inks

The generation of stable white light emission using lead-free perovskites remains a huge challenge in the development of future display and lighting technologies, due to fast material deterioration and the decrease of the color quality. In this work, we report a combination of diverse types of 2D A2SnX4 (A = bulky cation, X = Br, I) perovskites exhibiting self-trapped exciton (STE) emission and blue luminescent carbon quantum dots (CQDs), with the purpose of generating A2SnX4/CQD inks with a broadband emission in the visible region and a tunable white light color. By varying the concentration of the 2D perovskite, the white emission of the mixtures is modulated to cool, neutral, and warm tonalities, with a PL quantum yield up to 45%. From the combinations, the PEA2SnI4/CQD-based ink shows the longest stability, due to suitable surface ligand passivation provided by the capping ligands covering the CQDs, compensating the defect sites in the perovskite. Then, by incorporating the PEA2SnI4/CQDs inks into an acrylate polymer matrix, the quenching of the PL component from the perovskite was restrained, being stable for >400 h under ambient conditions and at a relative humidity of ∼50%, and allowing the preparation of complex 3D-printed composites with stable white emission tonalities. This contribution offers an application of STE-based Sn-perovskites to facilitate the future fabrication of lead-free white-light optoelectronic devices.

Nitrogen Configuration Effects on Charge Carrier Dynamics in CsPbBr3/Carbon Dots S-Scheme Heterojunction for Photocatalytic CO2 Reduction

Nitrogen-doped carbon dots (NCDs) featuring primary pyrrolic N and pyridinic N dominated configurations were prepared using hydrothermal (H-NCDs) and microwave (M-NCDs) methods, respectively. These H-NCDs and M-NCDs were subsequently applied to decorate CsPbBr3 nanocrystals (CPB NCs) individually, using a ligand-assisted reprecipitation process. Both CPB/M-NCDs and CPB/H-NCDs nanoheterostructures (NHSs) exhibited S-scheme charge transfer behavior, which enhanced their performance in photocatalytic CO2 reduction and selectivity of CO2-to-CH4 conversion, compared to pristine CPB NCs. The presence of pyrrolic N configuration at the heterojunction of CPB/H-NCDs facilitated efficient S-scheme charge transfer, leading to a remarkable 43-fold increase in photoactivity. In contrast, CPB/M-NCDs showed only a modest 3-fold enhancement in photoactivity, which was attributed to electron trapping by pyridinic N at the heterojunction. The study offers crucial insights into charge carrier dynamics within perovskite/carbon NHSs at the molecular level to advance the understanding of solar fuel generation.

Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives

Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report. The synthesis approaches, including pre-treatment methods, and the properties of the CDs derived from non-biomass waste are comprehensively discussed. Subsequently, we summarize the diverse applications of CDs from non-biomass waste in sensing, information encryption, LEDs, solar cells, and plant growth promotion. In the final section, we delve into the future challenges and perspectives of CDs derived from non-biomass waste, shedding light on the exciting possibilities in this emerging area of research.

Simultaneous sensing of carbidopa and levodopa by a novel strategy based on dual-emission ratiometric assay of modified carbon dots

Rapid control of the content of Parkinson's drugs in biological fluids and pharmaceutical formulations is of great importance because changes in the concentration of these drugs affect their bioavailability and biopharmaceutical properties. Therefore, we presented a simple and convenient method for the ratiometric detection of carbidopa and levodopa for carbon dots (CDs) dual-fluorescent emission. Dual-emission CDs were prepared from chitosan using a microwave method, following which the surface was chemically modified with terephthalaldehyde. CDs had two strong well-separated peaks at 445 and 510 nm. The relative measurement of carbidopa and levodopa was based on the static extinction of CDs at 445 nm and increase at 510 nm, respectively. The linear range for carbidopa measurement was 2.5-300 nM, with a limit of detection (LOD) of 2.1 nM, and a relative standard deviation (RSD) of 1.68%. Further, the linear range for levodopa measurement was equal to 3.0-400 nM, with LOD and RSD% of 2.8 nM and 3.5%, respectively. Also, selectivity of ratiometric sensor in the presence of interferences was investigated, which showed that the recovery of carbidopa and levodopa in serum and urine samples has changed between 96.80% and 116.24% with RSD% 0.11-0.77. CDs also provided good results for the determination of carbidopa and levodopa in real samples, and had high selectivity in the presence of possible interferences.

Cellulose nanofiber-based multifunctional composite films integrated with zinc doped-grapefruit peel-based carbon quantum dots

This study aimed to develop a multifunctional active composite film to extend the shelf life of minced pork. The composite film was prepared by incorporating zinc-doped grapefruit peel-derived carbon quantum dots (Zn-GFP-CD) into a cellulose nanofiber (CNF) matrix. The resulting film significantly improved UV-blocking properties from 39.0 % to 85.7 % while maintaining the film transparency. Additionally, the CNF/Zn-GFP-CD5% composite film exhibits strong antioxidant activity with ABTS and DPPH radical scavenging activities of 99.8 % and 77.4 %, respectively. The composite film also showed excellent antibacterial activity against both Gram-negative and Gram-positive bacteria. When used in minced pork packaging, the composite films effectively inhibit bacterial growth, maintaining bacterial levels below 7 Log CFU/g after 15 days and sustaining a red color over a 21-day storage period. Additionally, a significant reduction in the lipid oxidation of the minced pork was observed. These CNF/Zn-GFP-CD composite films have a great potential for active food packaging applications to extend shelf life and maintain the visual quality of packaged meat.

Excitation wavelength-dependent lanthanide-disalicylaldehyde coordination hybrid capable of distinguishing D2O from H2O

The increasing demands in fields of anti-counterfeiting, fluorescence analysis, clinical therapy and LED illumination are urgently eager for more excellent optically switchable luminescent materials with the stable and multimodal fluorescence in single-component matrix. Herein, the lanthanide-disalicylaldehyde coordination hybrid H2Qj4/TbxEuy is proposed as an efficient luminescent matrix to connect terbium sensibilization with ESIPT (excited-state intramolecular proton transfer) effects, and three multi-emission hybrids are finally designed and synthesized by regulating Tb3+ and Eu3+ ratios. Surprisingly, the H2Qj4/Tb0.91Eu0.09 shows the excitation wavelength-dependent luminescence in solution which originates from two energy transfer ways of terbium sensibilization effect. It exhibits green and red lights under the 369 and 394 nm UV lamp, respectively. Three hybrids are further used as lab-on-a-molecule fluorescent probes to perform multianalyte detection for various solvents by selected fluorescent sensing channels. By means of PCA (principal component analysis) and HCA (hierarchical cluster analysis), all of them can successfully detect and discriminate17 common solvents, especially the H2O and D2O. Moreover, the H2Qj4/Tb0.91Eu0.09 also shows the wide linear responses of H2O content in D2O, discrimination of two-component solvent mixtures, hygroscopicity evaluation of D2O and information encryption which will advance the progress of multimodal luminescent materials and multianalyte chemosensors.

Recent Progress in Folic Acid Detection Based on Fluorescent Carbon Dots as Sensors: A Review

Folic acid (FA) is a water-soluble vitamin found in diverse natural sources and is crucial for preserving human health. The risk of health issues due to FA deficiency underscores the need for a straightforward and sensitive FA detection methodology. Carbon dots (CDs) have gained significant attention owing to their exceptional fluorescence performance, biocompatibility, and easy accessibility. Consequently, numerous research studies have concentrated on developing advanced CD fluorescent probes to enable swift and precise FA detection. Despite these efforts, there is still a requirement for a thorough overview of the efficient synthesis of CDs and their practical applications in FA detection to further promote the widespread use of CDs. This review paper focuses on the practical applications of CD sensors for FA detection. It begins with an in-depth introduction to FA and CDs. Following that, based on various synthetic approaches, the prepared CDs are classified into diverse detection methods, such as single sensing, visual detection, and electrochemical methods. Furthermore, persistent challenges and potential avenues are highlighted for future research to provide valuable insights into crafting effective CDs and detecting FA.

Multi-color polymer carbon dots synthesized from waste polyolefins through phenylenediamine-assisted hydrothermal processing

The large accumulation and low recycling rates of polyolefin waste have posed a threat to the environment and human health. The shortage of chemical recycling methods for polyolefins strongly demands the development of new and sustainable treatment technologies for hydrocarbon plastics to improve their waste management. In this study, polyethylene (PE) and polypropylene (PP) were utilized for the preparation of multi-color polymer carbon dots (PCDs) via a two-step hydrothermal (HT) synthesis involving (i) thermo-oxidative degradation of polyolefins to precursors containing plentiful oxygen-based functional groups, and (ii) modification with phenylenediamine (PDA). The fluorescence of PCDs depends on the structure of isomeric PDA and PCDs modified by ortho-, meta-, and para-PDA emit blue, green, and yellow color fluorescence, respectively. The formation mechanism of PCDs, involving dehydrative condensation and amination of PE or PP-derived precursors by PDA, was proposed. The obtained PCDs were utilized for the detection and quantification of Fe3+ ions at ppm concentrations. The proposed strategy here aims to broaden the scope of the chemical recycling methods for polyolefin plastic waste as well as to develop a conversion route of polyolefin to value-added materials.

Size Isn't Everything: Geometric Tuning in Polycyclic Aromatic Hydrocarbons and Its Implications for Carbon Nanodots

Recent developments in light-emitting carbon nanodots and molecular organic semiconductors have seen renewed interest in the properties of polycyclic aromatic hydrocarbons (PAHs) as a family. The networks of delocalized π electrons in sp2-hybridized carbon grant PAHs light-emissive properties right across the visible spectrum. However, the mechanistic understanding of their emission energy has been limited due to the ground state-focused methods of determination. This computational chemistry work, therefore, seeks to validate existing rules and elucidate new features and characteristics of PAHs that influence their emissions. Predictions based on (time-dependent) density functional theory account for the full 3-dimensional electronic structure of ground and excited states and reveal that twisting and near-degeneracies strongly influence emission spectra and may therefore be used to tune the color of PAHs and, hence, carbon nanodots. We particularly note that the influence of twisting goes beyond torsional destabilization of the ground-state and geometric relaxation of the excited state, with a third contribution associated with the electric transition dipole. Symmetries and peri-condensation may also have an effect, but this could not be statistically confirmed. In pursuing this goal, we demonstrate that with minimal changes to molecular size, the entire visible spectrum may be spanned by geometric modification alone; we have also provided a first estimate of emission energy for 35 molecules currently lacking published emission spectra as well as clear guidelines for when more sophisticated computational techniques are required to predict the properties of PAHs accurately.

A review on the chemical and biological sensing applications of silver/carbon dots nanocomposites with their interaction mechanisms

The development of new nanocomposites has a significant impact on modern instrumentation and analytical methods for chemical analysis. Due to their unique properties, carbon dots (CDs) and silver nanoparticles (AgNPs), distinguished by their unique physical, electrochemical, and optical properties, have captivated significant attention. Thus, combining AgNPs and CDs may produce Ag/CDs nanocomposites with improved performances than the individual material. This comprehensive review offers an in-depth exploration of the synthesis, formation mechanism, properties, and the recent surge in chemical and biological sensing applications of Ag/CDs with their sensing mechanisms. Detailed insights into synthesis methods to produce Ag/CDs are unveiled, followed by information on their physicochemical and optical properties. The crux of this review lies in its spotlight on the diverse landscape of chemical and biological sensing applications of Ag/CDs, with a particular focus on fluorescence, electrochemical, colorimetric, surface-enhanced Raman spectroscopy, and surface plasmon resonance sensing techniques. The elucidation of sensing mechanisms of the nanocomposites with various target analytes adds depth to the discussion. Finally, this review culminates with a concise summary and a glimpse into future perspectives of Ag/CDs aiming to achieve highly efficient and enduring Ag/CDs for various applications.

A new N/Fe doped carbon dot nanosurface molecularly imprinted polymethacrylate nanoprobe for trace fipronil with SERS/RRS dimode technique

The N and Fe doped carbon dot (CDNFe) was prepared by microwave procedure. Using CDNFe as the nano-substrate, fipronil (FL) as the template molecule and α-methacrylic acid as the functional monomer, the molecular imprinted polymethacrylic acid nanoprobe (CDNFe@MIP) with difunction was synthesized by microwave procedure. The CDNFe@MIP was characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier infrared spectroscopy, and other techniques. The results show that the nanoprobe not only distinguish FL but also has a strong catalytic effect on the HAuCl4-Na2C2O4 nanogold indicator reaction. When the nanoprobes specifically recognize FL, their catalytic effect is significantly reduced. Since the AuNPs generated by HAuCl4 reduction have strong surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects, a SERS/RRS dual-mode sensing platform for detecting 5-500 ng/L FL was constructed. The new analytical method was applied to detect FL in food samples with a relative standard deviation (RSD) of 3.3-8.1 % and a recovery rate of 94.6-104.5 %.

Cancer Cell Targeting Via Selective Transferrin Receptor Labeling Using Protein-Derived Carbon Dots

Carbon dot (CD) nanoparticles offer tremendous advantages as fluorescent probes in bioimaging and biosensing; however, they lack specific affinity for biomolecules, limiting their practical applications in selective targeting. Nanoparticles with intrinsic affinity for a target have applications in imaging, cytometry, therapeutics, etc. Toward that end, we report the transferrin receptor (CD71) targeting CDs, synthesized for the first time. The formation of these particles is truly groundbreaking, as direct tuning of nanoparticle affinity was achieved by simple and careful precursor selection of a protein, which has the targeting characteristic of interest. We hypothesized that the retention of the original protein's peptides on the nanoparticle surface provides the CDs with some of the function of the precursor protein, enabling selective binding to the protein's receptor. This was confirmed with FTIR (Fourier transform infrared) data and subsequent affinity-based cell assays. These transferrin (Tf)-derived CDs have been shown to possess an affinity for CD71, a cancer biomarker that is ubiquitously expressed in nearly every cancer cell line due to its central role mediating the uptake of cellular iron. The CDs were tested using the human leukemia cell line HL60 and demonstrated the selective targeting of CD71 and specific triggering of transferrin-mediated endocytosis via clathrin-coated pits. The particle characterization results reflect a carbon-based nanoparticle with bright violet fluorescence and 7.9% quantum yield in aqueous solution. These unpresented CDs proved to retain the functional properties of the precursor protein. Indicating that this process can be repeated for other disease biomarkers for applications ranging from biosensing and diagnostic bioimaging to targeted therapeutics.

Are "Carbon Dots" Always Carbon Dots? Evidence for their Supramolecular Nature from Structural and Dynamic Studies in Solution and in the Pure Solid

A model for the morphology (size, shape, and crystallinity) of carbon dots (CDs) in the solid state consistent with the observed photoluminescence in solution is proposed herein. Overwhelming evidence has been collected that links the data coming from solid-state analysis (high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS)) to that of solution (pulsed-field gradient (PFG)-NMR spectroscopy, time-resolved fluorescence anisotropy (TRFA), and steady-state/time-resolved fluorescence), allowing the establishment of an overall structural model for CDs. According to this model, the so-called carbon dots, observed under HRTEM imaging, are in fact supramolecular organized structures dynamically assembled from small to medium-sized molecular species when the solvent is removed to give the solid form. In this way, the imaged nanoparticles (TEM/AFM) are not covalently bound entities formed during the synthetic process, but instead supramolecular entities formed by noncovalent interactions. These particles, if at all present in solution, have the form of loose associations of relatively small molecules. This study was conducted on CDs obtained from the hydrothermal carbonization (HTC) of a biomass waste (olive wet pomace).

Green, facial zinc doped hydrothermal synthesis of cinnamon derived fluorescent carbon dots (Zn-Cn-CDs) for highly selective and sensitive Cr6+ and Mn7+ metal ion sensing application

Carbon dots have demonstrated a great potential as luminescent nanoparticles in energy, drug delivery, sensors, and various biomedical applications as well as environmental pollutants and water analysis. Although, such nanoparticles appear to exhibit low toxicity compared to other semiconductor and metal based luminescent nanomaterials. Today, we know that toxicity of carbon dots (CDs) strongly depends on the protocol of fabrication. The various dopants or heteroatoms have been used to enhance the optical and physicochemical properties. In this work, zinc doped aqueous fluorescent Zn-Cn-CDs have been synthesized from cinnamon by hydrothermal synthesis method. The synthesized Zn-Cn-CDs were confirmed for their physicochemical properties by using various characterization techniques viz. UV-Vis. and spectrofluorometer for optical properties, Fourier transform infrared spectroscopy (FTIR) and XRD, as well as TEM and XPS, was done for morphological and chemical analysis. The successfully synthesized Zn-Cn-CDs showed outstanding optical performance for metal ion sensing applications. The developed heteroatom doped Zn-Cn-CDs as a fluorescent probe exhibited higher selectivity and sensitivity for Cr6+ and Mn7+ metal ions. The obtained results showed a better linear range with excellent limit of detection (LOD) 3.97 µg/mL and 2.05 µg/mL for Cr6+ and Mn7+ metal ions respectively. The low cost, simple and highly fluorescent probe can be effectively applicable for development of environmental pollutants sensing purposes.

Green to deep-red emissive carbon dot formation by C+ion implantation on nitrogen beam created self-masked nano-template

We report the formation of green to red emissive arrays of carbon dot on silicon-nitride nano-templates by successive implantation of nitrogen and carbon broad ion beams. The patterned nano-templates are formed by 14 keV N2+ion-bombardment at grazing incident (70°) on Si. Subsequently, 5 keV C+ions are implanted at the selective sites of the pyramidal nano-template by taking advantage of the self-masking effect. The nano-pyramidal pattern and the implanted carbon dots at the specific sites are confirmed by atomic force microscopy and cross sectional transmission electron microscopy measurements. The developed carbon dots (CDs) are mostly amorphous and consists of SiC and graphitic nitrogen (CN). G-band and D-band carbons are identified by Raman spectroscopy, while the presence of SiC and CN are detected by XPS measurements. A change of band-gap is observed for C-implanted templates by the UV-vis spectroscopy. Excitation wavelength-dependent photoemission from the dots is found in the green to red region. Maximum intense PL is observed in the green-orange region for excitation wavelength of 425 nm and a redshift of PL with decreasing intensity is observed with the increase of excitation wavelength. The observed photoluminescence is described in terms of the combined effects of quantum confinement, graphitic nitrogen and defect induced additional states formation in the carbon dots. The potential applications of CDs are also addressed.

Unlocking the full potential of citric acid-synthesized carbon dots as a supercapacitor electrode material via surface functionalization

This research paper investigates the effect of functionalizing the surfaces of citric acid-synthesized carbon dots (CDs) with hyperbranched bis(methylol)propionic acid (bis-MPA) polyester hydroxyl polymers (HBPs) on their performance as electrode materials in a supercapacitor. Two types of HBPs with 16 and 64 peripheral hydroxyl groups were used to functionalize the CDs' oxygen-enriched surface. Here, CDs were used as electrode materials for the first time in symmetric supercapacitors without a composite material, and how surface modification affects the capacitance performance of CDs was investigated. Our results showed that the functionalization of green-emitting CDs with HBP resulted in the successful passivation of surface defects, which improved their stability and prevented further oxidation. The CDs with HBP passivation exhibited excellent electrochemical performance, with a high specific capacitance of 32.08 F g-1 at 0.1 A g-1 and good rate capability, indicating a faster ion transport rate at high current densities. Experimental EPR spectra of functionalized and non-functionalized CDs reveal distinct changes in g-factor values and line widths, confirming the impact of dangling bonds and spin-orbit interactions. The observed broader linewidth indicates a wider range of electron spin resonances due to energy-level splitting induced by spin-orbit coupling. The excellent electrochemical performance of CDs with HBP passivation can be attributed to the presence of oxygen-containing surface functional groups such as hydroxyl and carboxyl groups on their surfaces, which enhance the conductivity and charge transfer reactions. These results suggest that functionalization with polar HBPs is a promising strategy to enhance the electrochemical performance of CDs in supercapacitor applications.

Near-Infrared Fluorescent Silica Nanoparticles Based on Gold-Silver Alloy Nanoclusters for Clinical Diagnosis

In clinical diagnosis, fluorescent particles are applied to detect analytes in biofluids, such as blood and saliva. However, current fluorescence detection methods have not been optimized to account for the overlapping autofluorescence peaks of biological substances. Gold and silver nanoclusters are known to the novel fluorescent materials and their emission wavelengths depend on cluster size. In this study, we developed fluorescent silica nanoparticles using gold-silver alloy nanoclusters and chitosan (CS) (NH2-SiO2@Au@CS@AuAg) by the layer-by-layer method. Under UV-light irradiation at 365 nm, the emission wavelength of NH2-SiO2@Au@CS@AuAg reached 750 nm in the near-IR region. Scanning electron microscopy images revealed that the shape of NH2-SiO2@Au@CS@AuAg was uniform and spherical. The fluorescence spectrum of horse blood obtained in the presence of NH2-SiO2@Au@CS@AuAg contained a specific fluorescence peak attributed to NH2-SiO2@Au@CS@AuAg, which was distinguishable from the autofluorescence peaks. These results showed that NH2-SiO2@Au@CS@AuAg has advantageous fluorescence properties for clinical diagnostic applications.

Nitrogen- and Sulfur-Codoped Strong Green Fluorescent Carbon Dots for the Highly Specific Quantification of Quercetin in Food Samples

Carbon dots (CDs) doped with heteroatoms have garnered significant interest due to their chemically modifiable luminescence properties. Herein, nitrogen- and sulfur-codoped carbon dots (NS-CDs) were successfully prepared using p-phenylenediamine and thioacetamide via a facile process. The as-developed NS-CDs had high photostability against photobleaching, good water dispersibility, and excitation-independent spectral emission properties due to the abundant amino and sulfur functional groups on their surface. The wine-red-colored NS-CDs exhibited strong green emission with a large Stokes shift of up to 125 nm upon the excitation wavelength of 375 nm, with a high quantum yield (QY) of 28%. The novel NS-CDs revealed excellent sensitivity for quercetin (QT) detection via the fluorescence quenching effect, with a low detection limit of 17.3 nM within the linear range of 0-29.7 μM. The fluorescence was quenched only when QT was brought near the NS-CDs. This QT-induced quenching occurred through the strong inner filter effect (IFE) and the complex bound state formed between the ground-state QT and excited-state NS-CDs. The quenching-based detection strategies also demonstrated good specificity for QT over various interferents (phenols, biomolecules, amino acids, metal ions, and flavonoids). Moreover, this approach could be effectively applied to the quantitative detection of QT (with good sensing recovery) in real food samples such as red wine and onion samples. The present work, consequently, suggests that NS-CDs may open the door to the sensitive and specific detection of QT in food samples in a cost-effective and straightforward manner.

Nanomaterials for fluorescent detection of vitamin B2: A review

Vitamin B2 plays vital roles in maintaining human health. It is of tremendous significance to construct sensitive sensors of VB2. In this review, we first briefly presented the sensing mechanisms of fluorescent nanomaterials for sensing VB2. Subsequently, the advances of nanomaterials for fluorescent determination of VB2 were highlighted. And sensing performance of traditional approaches and fluorescent nanosensors was further compared. In last section, the challenges and perspectives concerning the topic were discussed.

Functional chromophores synthesized via multicomponent Reactions: A review on their use as cell-imaging probes

This review aims to provide a comprehensive overview of recent advancements and applications of fluorescence imaging probes synthesized via MCRs (multicomponent reactions). These probes, also known as functional chromophores, belong to a currently investigated class of fluorophores that are presently being successfully applied in bioimaging experiments, especially in various living cell lineages. We describe some of the MCRs that have been employed in the synthesis of these probes and explore their applications in biological imaging, with an emphasis on cellular imaging. The review also discusses the challenges and future perspectives in the field, particularly considering the potential impact of MCR-based fluorescence imaging probes on advancing this field of research in the coming years. Considering that this area of research is relatively new and nearly a decade has passed since the first publication, this review also provides a historical perspective on this class of fluorophores, highlighting the pioneering works published between 2011 and 2016.

Bandgap tailoring and enhancing the aromatization in cysteine-based carbon dots

Cysteine, as a non-aromatic precursor, was used to produce Nitrogen (N) and Sulfur (S) sources for preparing N, S-doped carbon dots (CDs) with tunable luminescence emission. Despite the tremendous investigations, the photoluminescence (PL) mechanism of CDs is still unclear due to its complex core-shell structure, variety of surface functional groups, and structure dependency. This study focuses on controlling aromatization and graphitization processes during the hydrothermal synthesis on CDs by using Citric Acid (CA) and Ammonium persulfate. Detailed characterizations by FTIR spectroscopy, XPS, and HR-TEM are provided to suggest both chemical and bandgap structures. Results reveal that the red-shift of PL occurred due to the graphitization and increasing content of graphitic nitrogen in the core, as well as the Pyridinic and Amine groups creating sub-bands on the surface. These findings resolve the controversy on the PL mechanism of Cysteine-based CDs and provide a general guide for increasing the aromatization and graphitization degree from non-aromatic precursors which clarify the mechanism exploration and structural analysis of other types of CDs.

Dual-functional molecularly imprinted doped carbon dot based on metal-organic frameworks for tetracycline adsorption and determination

A carbon dot (CD) was prepared by using tryptophan as a single carbon source and demonstrated its good selective fluorescence quenching effect on tetracycline (TC). The modified metal-organic frameworks (MOF) NH2-MIL-101 was chosen as matrix, doped with CD, molecularly imprinted polymer (MIP) prepared with TC as the template, and finally CD-MOF-MIP complexes (CD@MIP) was synthesized. For comparison, MIP were also prepared without CD as well as non-imprinted polymers and their ability was tested, respectively. CD@MIP is a nanomaterial with bright fluorescence under the irradiation of ordinary UV equipment (λ = 360 nm), which has a fast and stable fluorescence quenching for TC and a good linear relationship for TC in the concentration range 0-400 μmol L-1. The quantum yield of CD@MIP was 12.75% and the 3σ limit of detection (LOD) for CD@MIP was 0.59 μmol L-1. The maximum adsorption capacity of CD@MIP reached 304.6 mg g-1 and the adsorption equilibrium was reached after about 75 min. The adsorption of CD@MIP to tetracycline spiked in milk samples reached 90.0 mg g-1 within 2 h, which was much higher than that of NIP (48.4 mg g-1) under the same conditions, as demonstrated by high performance liquid chromatography (HPLC). The results obtained showed that CD@MIP combined the high adsorption capacity of MOF, the specific adsorption of molecular imprinting and the fluorescence properties of CD, can determine and rapidly removeTC in the environment.

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Harnessing Efficient ROS Generation in Carbon Dots Derived from Methyl Red for Antimicrobial Photodynamic Therapy

The emergence of drug-resistant pathogenic microorganisms has become a public health concern, with demand for strategies to suppress their proliferation in healthcare facilities. The present study investigates the physicochemical and antimicrobial properties of carbon dots (CD-MR) derived from the methyl red azo dye. The morphological and structural analyses reveal that such carbon dots present a significant fraction of graphitic nitrogen in their structures, providing a wide emission range. Based on their low cytotoxicity against mammalian cells and tunable photoluminescence, these carbon dots are applied to bioimaging in vitro living cells. The possibility of using CD-MR to generate reactive oxygen species (ROS) is also analyzed, and a high singlet oxygen quantum efficiency is verified. Moreover, the antimicrobial activity of CD-MR is analyzed against pathogenic microorganisms Staphylococcus aureus, Candida albicans, and Cryptococcus neoformans. Kirby-Bauer susceptibility tests show that carbon dots synthesized from methyl red possess antimicrobial activity upon photoexcitation at 532 nm. The growth inhibition of C. neoformans from CD-MR photosensitization is investigated. Our results show that N-doped carbon dots synthesized from methyl red efficiently generate ROS and possess a strong antimicrobial activity against healthcare-relevant pathogens.

Enzyme-free dual amplification biosensor based on functional nucleic acid and CDs/CoOOH for detection of leukemia fusion gene

Acute promyelocytic leukemia (APL) is an acute myeloid leukemia (AML) with a specific fusion gene target, PML/RARα fusion gene (PML/RARα), which is formed by the translocation of chromosomes 15 and 17. Detection of PML/RARα is the most reliable parameter for the diagnosis, treatment adjustment, efficacy evaluation, prognosis analysis and relapse prediction of APL. In this study, a novel biosensor was constructed for rapid enzyme-free detection of PML/RARα using DNAzyme and carbon dots/cobalt oxhydroxide nanosheet complexs (CDs/CoOOH). In the detection system, the separated DNAzymes could specifically recognize and bind together by the PML/RARα to form a complete DNAzyme for shearing hairpin probe (HP), then generated trigger, which was the first signal amplification. Then, trigger could hybridize with the capture probe (CP) anchored to streptavidin (SA) modified microplate as well as fluorescence quenching signal probe (SP@CDs/CoOOH). Finally, ascorbic acid (AA) was added to decompose CoOOH and the fluorescence of CDs was released, which was the second signal amplification. Through the dual signal amplification of DNAzyme and CDs/CoOOH, PML/RARα could be detected quickly and sensitively, which overcame the limitation of protein enzyme in traditional fluorescence methods, showing potential clinical application value in the diagnosis and treatment of leukemia.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Two-Pronged Approach: Synergistic Tuning of the Surface and Carbon Core to Achieve Yellow Emission in Lignin-Based Carbon Dots

In this study, yellow emissive lignin-based carbon dots (Y-CDs) were successfully prepared through a synergistic approach to adjust its surface and carbon core states. The lignin was initially effectively oxidized and carboxymethylated to impart abundant -COOH onto the precursor, which eventually adjusts the surface state of the CDs. Subsequently, α-naphthol was employed during the solvothermal treatment of lignin with the aim of elevating the sp2 domain content in the CDs and, thus, adjusting its carbon core state. The obtained Y-CDs possessed abundant carboxyl groups and nanoscale spherical shape with an average diameter of 5.21 nm. Meanwhile, the energy gap of Y-CDs was 2.46 eV and the optimal emission wavelength was 561 nm under the excitation wavelength of 410 nm. Synergistic adjusting carbon core and surface of the Y-CDs would alter the surface charge distribution and promote the delocalization of π electrons, and thus lead to a red shifting with the emission wavelength of 154 nm. Furthermore, a shape memory film with excellent recovery performance and fluorescent properties was designed by embedding the Y-CDs into polyvinyl alcohol (PVA) polymer. The incorporation of Y-CDs could impart the film with considerable high-value applications in the fields of intelligent sensing, biomedicine, and tissue engineering.

Study of the Scattering Effect by SiO2 Nanoparticles, in a Luminescent Solar Concentrator Sensitized with Carbon Dots

Luminescent solar concentrators (LSCs) have become an attractive way to produce green energy via their integration into buildings as photovoltaic windows. Recently, carbon quantum dots (C-QDs) have become the most studied luminescent material for the manufacture of luminescent solar concentrators due to their advantages, such as low toxicity, sustainability, and low cost. Despite the advantages of carbon quantum dots, they remain a low-efficiency material, and it is difficult to fabricate LSCs with a good performance. To address this problem, some of the research has used SiO2 nanoparticles (Nps) to produce a light-scattering effect that helps to improve the system performance. However, these studies are limited and have not been discussed in detail. In this regard, this research work was designed to evaluate the contribution of the scattering effect in different systems of carbon quantum dots used in a possible luminescent solar concentrator. To carry out this study, C-QDs and SiO2 Nps were synthesized by hydrothermal methods and the Stober method, respectively. We used different concentrations of both materials to fabricate film LSCs (10 × 10 cm2). The results show that the light scattered by the SiO2 Nps has a double contribution, in terms of light redirected towards the edges of the window and as a secondary source of excitation for the C-QDs; thus, an improvement in the performance of the LSC is achieved. The best improvement in photoluminescence is achieved when the films are composed of 20% wt carbon quantum dots and 10% wt SiO2 Nps, reaching a gain of 16% of the intensity of the light incident on the edges of the window with respect to the LSCs where only C-QDs were used.

Fluorescent Carbon Dots Derived From Soy Sauce for Picric Acid Detection and Cell Imaging

Picric acid (PA) is a powerful nitro-aromatic explosive that harms the environment and human health. Developing non-toxic and low-cost sensors for the rapid detection of PA is essential. An environment-friendly fluorescent probe for PA detection is designed based on carbon dots (CDs) directly separated from edible soy sauce by silica gel column chromatography. Neither organic reagents nor heating process was needed to prepare CDs. The obtained CDs exhibit bright blue fluorescence, good water solubility, and photostability. The fluorescent probe for PA was developed according to the CD's fluorescence can be significantly quenched via the inner filter effect between CDs and PA. The linear range was 0.2-24 µM with a limit of detection of 70 nM. This proposed method was successfully employed to detect PA in the real water samples with satisfactory recoveries between 98.0-104.0%. Moreover, the CDs were suitable for fluorescence imaging of HeLa cells owing to their low toxicity and good biocompatibility.

Synthetic strategies, properties and sensing application of multicolor carbon dots: recent advances and future challenges

Recently, carbon dots (CDs) as newly developed carbon-based nanomaterials due to advantages such as excellent photostability and easy surface functionalization have generated wide application prospects in fields such as biological imaging and chemical sensing. The multicolor emission carbon dots (M-CDs) were acquired through the selection of different carbon source precursors, change of synthesis conditions and synthesis environment. Therefore, the aim of this review is to summarize the latest research progress in polychromatic CDs from the perspectives of synthesis strategies, luminescent mechanisms, luminescent properties and applications. This review focuses on how to prepare MCDs by changing raw materials and synthesis conditions such as reaction temperature, synthesis time, synthesis pH, and synthesis solvent. This review also presents the optical properties of MCDs, concentration effects, solvent effects, pH effects, elemental doping, and surface passivation on them, as well as their creative applications in the field of sensing applications. It is anticipated that this review will serve as a guide for the development of multifunctional M-CDs and inspire future research on controllable design and preparation of M-CDs.

Dual-Responsive Carbon Quantum Dots for the Simultaneous Detection of Cytosine and 5-Methylcytosine Interpreted by a Machine Learning-Assisted Smartphone

DNA methylation is an epigenetic alteration that results in 5-methylcytosine (5-mC) through the addition of a methyl group to the fifth carbon of a cytosine (C) residue. The methylation level, the ratio of 5-mC to C, in urine might be related to the whole-body epigenetic status and the occurrence of common cancers. To date, never before have any nanomaterials been developed to simultaneously determine C and 5-mC in urine samples. Herein, a dual-responsive fluorescent sensor for the urinary detection of C and 5-mC has been developed. This assay relied on changes in the optical properties of nitrogen-doped carbon quantum dots (CQDs) prepared by microwave-assisted pyrolysis. In the presence of C, the blue-shifted fluorescence intensity of the CQDs increased. However, fluorescence quenching was observed upon the addition of 5-mC. This was primarily due to photoinduced electron transfer as confirmed by the density functional theory calculation. In urine samples, our sensitive fluorescent sensor had detection limits for C and 5-mC of 43.4 and 74.4 μM, respectively, and achieved satisfactory recoveries ranging from 103.5 to 115.8%. The simultaneous detection of C and 5-mC leads to effective methylation level detection, achieving recoveries in the range of 104.6-109.5%. Besides, a machine learning-enabled smartphone was also developed, which can be effectively applied to the determination of methylation levels (0-100%). These results demonstrate a simple but very effective approach for detecting the methylation level in urine, which could have significant implications for predicting the clinical prognosis.

Ensemble and single-particle level fluorescent fine-tuning of carbon dots via positional changes of amines toward "supervised" oral microbiome sensing

Significance

Carbon dots (CDs) have attracted a host of research interest in recent years mainly due to their unique photoluminescence (PL) properties that make them applicable in various biomedical areas, such as imaging and image-guided therapy. However, the real mechanism underneath the PL is a subject of wide controversy and can be investigated from various angles.

Aim

Our work investigates the effect of the isomeric nitrogen position as the precursor in the synthesis of CDs by shedding light on their photophysical properties on the single particles and ensemble level.

Approach

To this end, we adopted five isomers of diaminopyridine (DAP) and urea as the precursors and obtained CDs during a hydrothermal process. The various photophysical properties were further investigated in depth by mass spectroscopy. CD molecular frontier orbital analyses aided us in justifying the fluorescence emission profile on the bulk level as well as the charge transfer processes. As a result of the varying fluorescent responses, we indicate that these particles can be utilized for machine learning (ML)-driven sensitive detection of oral microbiota. The sensing results were further supported by density functional theoretical calculations and docking studies.

Results

The generating isomers have a significant effect on the overall photophysical properties at the bulk/ensembled level. On the single-particle level, although some of the photophysical properties such as average intensity remained the same, the overall differences in brightness, photo-blinking frequency, and bleaching time between the five samples were conceived. The various photophysical properties could be explained based on the different chromophores formed during the synthesis. Overall, an array of CDs was demonstrated herein to achieve ∼ 100 % separation efficacy in segregating a mixed oral microbiome culture in a rapid (< 0.5    h ), high-throughput manner with superior accuracy.

Conclusions

We have indicated that the PL properties of CDs can be regulated by the precursors' isomeric position of nitrogen. We emancipated this difference in a rapid method relying on ML algorithms to segregate the dental bacterial species as biosensors.

Dual Emission Carbon Dots for Simultaneous Detections of Pb2+ and Fe3+ Ions in Water Via Distinct Sensing Mechanisms

Herein, dual-emission carbon dots (DE-CDs) were synthesized using a one-pot hydrothermal method. DE-CDs exhibited two well-separated peaks at 433 and 513 nm under ultraviolet excitation. The prepared DE-CDs offer selective detection of Fe3+ ions via inner filter effect (IFE) and Pb2+ ions via aggregation-induced enhancement (AIE). The obtained DE-CDs showed a good affinity for both Fe3+ and Pb2+ ions in the presence of various interfering ions. The limits of detection were 0.797 ppm and 4.739 ppm for Pb2+ and Fe3+, respectively. The finding reveals the huge potential of DE-CDs for the selective detection of multiple targets in one solution.

Uncommon 2D diamond-like carbon nanodots derived from nanotubes: atomic structure, electronic states, and photonic properties

In this article, we report the results of a relatively facile fabrication of carbon nanodots from single-walled and multi-walled carbon nanotubes (SWCNTs and MWCNTs). The results of X-ray photoelectron spectroscopy (XPS) and Raman measurements show that the obtained carbon nanodots are quasi-two-dimensional objects with a diamond-like structure. Based on the characterization results, a theoretical model of the synthesized carbon nanodots was developed. The measured absorption spectra demonstrate the similarity in the local atomic structure of carbon nanodots synthesized from single-walled and multi-walled carbon nanotubes. However, the photoluminescence (PL) spectra of nanodots synthesized from both sources turned out to be completely different. Carbon dots fabricated from MWCNTs exhibit PL spectra similar to those of nanoscale carbon systems with sp³ hybridization and a valuable edge contribution. At the same time nanodots synthesized from SWCNTs exhibit PL spectra which are typical for quantum dots with an estimated size of ∼0.6-1.3 nm.

Computational Investigation of Interactions between Carbon Nitride Dots and Doxorubicin

The study of carbon dots is one of the frontiers of materials science due to their great structural and chemical complexity. These issues have slowed down the production of solid models that are able to describe the chemical and physical features of carbon dots. Recently, several studies have started to resolve this challenge by producing the first structural-based interpretation of several kinds of carbon dots, such as graphene and polymeric ones. Furthermore, carbon nitride dot models established their structures as being formed by heptazine and oxidized graphene layers. These advancements allowed us to study their interaction with key bioactive molecules, producing the first computational studies on this matter. In this work, we modelled the structures of carbon nitride dots and their interaction with an anticancer molecule (Doxorubicin) using semi-empirical methods, evaluating both geometrical and energetic parameters.

Surficial amino groups coupling induced concentration-dependent fluorescence and fluorescence quantum yield of nitrogen-dopped carbon quantum dots via efficient charge transfer

Modification of surficial functional groups among carbon quantum dots (CQDs) has been considered an efficient approach to regulate the fluorescence emission of CQDs. However, the mechanism of how surficial functional groups affect fluorescence is vague which fundamentally limits the further applications of CQDs. Here we report the concentration-dependent fluorescence and fluorescence quantum yield of nitrogen-dopped carbon quantum dots (N-CQDs). At high concentrations (≥0.188 g/L), fluorescence redshift occurs accompanied with decrease in fluorescence quantum yield. Fluorescence excitation spectra and HOMO-LUMO energy gaps calculations show that energy levels of excited states of N-CQDs are relocated via the coupling of surficial amino groups among N-CQDs. Furthermore, electron density difference maps and broadened fluorescence spectra obtained from both experimental measurement and theoretical calculation further confirm that the coupling of surficial amino groups dominates the fluorescence property and verify the formation of charge-transfer state of N-CQDs complex at high concentrations which provides pathways for efficient charge transfer. Given that charge-transfer state induced fluorescence loss and fluorescence spectra broadening are the typical characteristics of organic molecules, CQDs exhibit the optical properties of both quantum dots and organic molecules.

Interaction between carbon dots from folic acid and their cellular receptor: a qualitative physicochemical approach

According to the World Health Organization, the number of cancers (all cancers, both sexes, all ages and worldwide) in 2020 reached a total of 19 292 789 new cases leading to 9 958 133 deaths during the same period. Many cancers could be cured if detected early. Preventing cancer and detecting it early are two essential strategies for controlling this pathology. For this purpose, several strategies have been described for imaging cancer cells. One of them is based on the use of carbon nanoparticles called carbon dots, tools of physical chemistry. The literature describes that cancer cells can be imaged using carbon dots obtained from folic acid and that the in cellulo observed photoluminescence probably results from the interaction of these nanoparticles with the folic acid-receptor, a cell surface protein overexpressed in many malignant cells. However, this interaction has never been directly demonstrated yet. We investigated it, for the first time, using (i) freshly synthesized and fully characterized carbon dots, (ii) folate binding protein, a folic acid-receptor model protein and (iii) fluorescence spectroscopy and isothermal titration calorimetry, two powerful methods for detecting molecular interactions. Our results even highlight a selective interaction between these carbon made nano-objects and their biological target.

Rapid and sensitive determination of Piroxicam by N-doped carbon dots prepared by plant soot

Piroxicam (PX) as a nonsteroidal anti-inflammatory drug (NSAID) can be effectively used for anti-inflammatory and analgesia. However, overdoses may induce side effects such as gastrointestinal ulcers and headaches. Therefore, the assay of piroxicam has considerable significance. In this work, nitrogen-doped carbon dots (N-CDs) was synthesized for PX detection. The fluorescence sensor was fabricated by hydrothermal method with plant soot and ethylenediamine. The strategy exhibited a detection range of 6-200 μg/mL and 250-700 μg/mL with the limited detection of 2 μg/mL. The mechanism of the PX assay base on the fluorescence sensor was the process of electron transfer between the PX and N-CDs. The assay subsequently demonstrated could be successfully used in actual sample. The results indicated that the N-CDs could be a superior candidate nanomaterial for piroxicam monitoring in the healthcare product industry.

Deep insights to explain the mechanism of carbon dot formation at various reaction times using the hydrothermal technique: FT-IR, 13C-NMR, 1H-NMR, and UV-visible spectroscopic approaches

A well-explained mechanism for synthesizing carbon dots (CDs) is not yet explored and is still a subject of great debate and challenge. This study used a one-step hydrothermal method to prepare highly efficient, gram-scale, excellent water solubility, and blue fluorescent nitrogen-doped carbon dots (NCDs) with the particle size average distribution of around 5 nm from 4-aminoantipyrine. The effects of varying synthesis reaction times on the structure and mechanism formation of NCDs were investigated using spectroscopic methods, namely FT-IR, 13C-NMR, 1H-NMR, and UV-visible spectroscopies. The spectroscopic results indicated that increasing the reaction time affects the structure of the NCDs. As the hydrothermal synthesis reaction time is extended, the intensity of the peaks in the aromatic region decreases, and new peaks in the aliphatic and carbonyl group regions are generated, which display enhanced intensity. In addition, the photoluminescent quantum yield increases as the reaction time increases. The presence of a benzene ring in 4-aminoantipyrine is thought to contribute to the observed structural changes in NCDs. This is due to the increased noncovalent π-π stacking interactions of the aromatic ring during the carbon dot core formation. Moreover, the hydrolysis of the pyrazole ring in 4-aminoantipyrine results in polar functional groups attached to aliphatic carbons. As the reaction time prolongs, these functional groups progressively cover a larger portion of the surface of the NCDs. After 21 h of the synthesis process, the XRD spectrum of the produced NCDs illustrates a broad peak at 21.1°, indicating an amorphous turbostratic carbon phase. The d-spacing measured from the HR-TEM image is about 0.26 nm, which agrees with the (100) plane lattice of graphite carbon and confirms the purity of the NCD product with a surface covered by polar functional groups. This investigation will lead to a greater understanding of the effect of hydrothermal reaction time on the mechanism and structure of carbon dot synthesis. Moreover, it offers a simple, low-cost, and gram-scale method for creating high-quality NCDs crucial for various applications.

Selective detection of nitenpyram by silica-supported carbon quantum dots

In this study, a fluorescent sensor of nitrogen-doped carbon quantum dots (N-CQDs) and silica gel hybrid was developed for the quantitative detection of nitenpyram, a toxic neonicotinoid existing in groundwater and/or surface water.The prepared N-CQDs@SiO₂ sensor exhibited remarkable sensing selectivity and sensitivity towards nitenpyram among the four pesticides and six metal ions. A prominent fluorescence quenching of N-CQDs@SiO₂ at 445 nm was observed in the presence of nitenpyram with a linear response range of 0-300.0 mg L^-1 and an estimated limit of detection of 1.53 mg L^-1. The main cause for selective sensing is that nitenpyram absorbs the excitation light of N-CQDs@SiO₂, leading to fluorescence quenching of the sensor through the inner filter effect.

Metal-Enhanced Fluorescent Carbon Quantum Dots via One-Pot Solid State Synthesis for Cell Imaging

In this study, a facile one-pot solid-state synthesis method is developed to shed light on the metal-enhanced fluorescence (MEF) effect in carbon quantum dots (CQDs) and gold nanoparticles (AuNPs) hybrid materials. This is one of the few studies on the solid-state synthesis of N-doped CQDs/gold hybrid nanomaterials. We have conducted various sets of experiments to reveal the role of individual reagents during the nucleation and growth of nanoparticles. We have demonstrated that the addition of a small amount of gold salt illustrates a paramount effect (10³-fold) in photoluminescence intensity. This effect is ascribed to MEF, which is caused due to interactions between the excited-state fluorophores and the free surface electrons of metal nanoparticles. It is interesting to note that a further increase of gold yields fluorescence quenching due to a large number of formed AuNPs causing fluorescence resonance energy transfer. By adjusting the volume ratio of gold salt and CD precursors, it is possible to obtain the CQDs-AuNPs hybrid with the highest fluorescence, which produces extensive visible light under 460 nm excitation. Synthesized materials have been successfully used for imaging human dermal fibroblasts and A549 lung epithelial cells. The dose-dependent cytotoxicity studies reveal that the hybrid structures do not have cytotoxicity.

Formation and Band Gap Tuning Mechanism of Multicolor Emissive Carbon Dots from m-Hydroxybenzaldehyde

Reported in 2004, carbon dots (CDs) have been widely used in various fields due to their excellent optical properties. However, the mechanism of their fluorescence modulation is still a controversial issue, which also seriously affects the further development of carbon dots. In this paper, m-hydroxybenzaldehyde is used as a raw material to obtain multicolor luminescent CDs by pyrolysis under different reaction conditions, thereby revealing the forbidden band tuning and formation mechanism of CDs. Different acid-base conditions lead to different reaction paths of the precursors, forming molecular fluorophores with different conjugated structures, which aggregate to eventually form CDs and further enhance the photoluminescence of the system by inhibiting the movement of the fluorescent centers.

Exploring the Impact of Nitrogen Doping on the Optical Properties of Carbon Dots Synthesized from Citric Acid

The differences between bare carbon dots (CDs) and nitrogen-doped CDs synthesized from citric acid as a precursor are investigated, aiming at understanding the mechanisms of emission and the role of the doping atoms in shaping the optical properties. Despite their appealing emissive features, the origin of the peculiar excitation-dependent luminescence in doped CDs is still debated and intensively being examined. This study focuses on the identification of intrinsic and extrinsic emissive centers by using a multi-technique experimental approach and computational chemistry simulations. As compared to bare CDs, nitrogen doping causes the decrease in the relative content of O-containing functional groups and the formation of both N-related molecular and surface centers that enhance the quantum yield of the material. The optical analysis suggests that the main emission in undoped nanoparticles comes from low-efficient blue centers bonded to the carbogenic core, eventually with surface-attached carbonyl groups, the contribution in the green range being possibly related to larger aromatic domains. On the other hand, the emission features of N-doped CDs are mainly due to the presence of N-related molecules, with the computed absorption transitions calling for imidic rings fused to the carbogenic core as the potential structures for the emission in the green range.