Levels and ecological risk assessment of metals in soils from a typical e-waste recycling region in southeast China

Effects of magnetic field on cd subcellular distribution and chemical speciation in Noccaea caerulescens

Implementing an external magnetic field of suitable strength has been reported to increase Cd uptake by Noccaea caerulescence. However, only a few mechanisms promoting this efficiency have been reported. A series of culture experiments was conducted to explore how Cd subcellular distribution and speciation vary within the tissue of N. caerulescens when subjected to external magnetic fields of different intensities. Without a magnetic field, over 80% of the Cd was deposited in the cell wall and cytoplasm, indicating that cell wall retention and cytoplasm isolation are significant mechanisms for the detoxification of Cd. An external magnetic field (120 mT) increased the Cd concentrations deposited in the cytoplasm and water-soluble inorganic Cd in the roots, increasing the cell wall-bound Cd and undissolved Cd phosphate in the shoots. Meanwhile, the magnetic field increased carbonic anhydrase activity in plant shoots, except at 400 mT. These results indicated that an external field can elevate the Cd decontamination capacity of N. caerulescens by changing the subcellular compartmentalization and speciation of Cd in different tissues.

A comparative study on metal pollution from surface dust of informal and formal e-waste recycling sectors in national capital region of New Delhi and associated risk assessment

Electrical and electronic waste (e-waste) is considered as resource and secondary source of metals, and is being recycled for recovery of precious and base metals. But the processes of recycling and the waste generated during e-waste recycling in informal and formal sectors contribute toxic metals in to the environment. This work aimed to compare the environmental and health impacts of informal and formal e-waste recycling facilities at New Delhi and Bhiwadi Industrial area in India, respectively. Here, concentrations of Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sn, V, Zn, and Ag, and As in surface dust collected from informal and formal recycling sectors and their associated pollution, human health and ecological risk are presented. Metal concentrations were higher than the background levels in both sectors. Contamination factor (Cf), contamination degree (Cdeg), pollution load index (PLI), geo-accumulation index (Igeo) and enrichment factor (EnF) of metals indicated severe pollution levels in both sectors. However, contamination in informal sector was comparatively higher than the formal sector. Sampling sites in both sectors had very high ecological risk. Storage, dismantling/shredding and recycling techniques were contributors of metals in surface dust in formal sector whereas fumes deposition, re-suspension, and dried by-products during acid bath treatments were additional sources in informal sector. Metal pollution depends on metal(s), e-waste type(s) and recycling sector(s). Total non-carcinogenic health risk due to metals was 6.5E+00 and 6.0E+01 and 6.2E+00 and 5.5E+01 in adult and children in informal and formal sectors, respectively. Total carcinogenic risk was 3.3E-03 and 7.2E-03 in informal and formal sectors, respectively. Ingestion was major pathways of metals followed by dermal and inhalation and children were more prone to risk compared to adults. Formal sectors too cause metal pollution but to lesser degree compared to informal. More effective pollution control measures are required in formal sector to control environmental pollution.

Organophosphate esters (OPEs) in a heavily polluted river in South China: Occurrence, spatiotemporal trends, sources, and phase distribution

In the past decade, organophosphate esters (OPEs) undergo rapid increase in production and use. Meanwhile, owing to their additive property, OPEs exhibit liability to escape from related products and therefore ubiquity in various environments. Moreover, numerous researches verify their bioavailability and negative effects on biota and human, hence their occurrence and associated risks have caught much concern, particularly those in aquatic systems. So far, however, OPEs in water are generally investigated as a whole, their phase distribution and behavior in waterbodies are incompletely characterized. We examined 25 OPEs in water (including dissolved and particulate phases), sediment, and sediment core samples from the Lian River, which flows through the Guiyu e-waste recycling zone and Shantou specific economic zone in South China. Compared to most global waterbodies, the Lian River showed high or ultrahigh OPE levels in both water and sediments, particularly in the reaches surrounded by e-waste recycling and plastic-related industries, which were the top two greatest OPE sources. Non-industrial and agriculture-related anthropogenic activities also contributed OPEs. Sediment core data suggested that OPEs have been present in waters in Guiyu since the 1960s and showed a temporal trend consistent with the local waste-recycling business. The phase distribution of OPEs in the Lian River was significantly correlated with their hydrophobicity and solubility. Owing to their wide range of physicochemical properties, OPE congeners showed significant percentage differences in the Lian River water and sediments. Generally, OPEs in water reflect their dynamic real-time inputs, while those in sediment signify their accumulative deposition, which is another cause of their phase distribution disparities in the Lian River. The physicochemical parameters of OPEs first imposed negative and then positive influences on their dissolved phase-sediment distribution, indicating the involvement of both the adsorption of dissolved OPEs and the deposition of particle-bound OPEs.

Assessment of heavy metal pollution and preschool children health risk in urban street dusts from different functional areas in a typical industrial and mining city, NW China

To assess the pollution characteristics and health risks associated with street dust exposure among preschool children in typical industrial and mining areas, we analyzed heavy metal concentrations of 20 urban street dusts in commercial area (CA), residential area (RA), scientific and educational area (SEA) and industrial and mining area (IMA) from Baiyin, NW China. The average concentrations of Cr, Mn, Ni, Cu, Zn, Cd, Pb, As and Hg were 614.96, 484.25, 1757.74, 6868.86, 893.19, 77.62, 1473.99, 15.01 and 0.59 mg·kg-1, respectively. The ecological risk indexes for Cd, Cu and Hg were found as 20,075.20, 1425.07 and 1174.86, respectively, and the ecological risk was extremely high. The pollution load indexes (PLI) were > 1 for all four functional areas. The total hazard index (THI) for different functional areas were more than 1, and the main exposure pathway for children was ingestion route. Heavy metals in street dust of the IMA had the highest THI for children (43.88), and HI of Pb was being most significant (17.38). In addition, the carcinogenic risk to children via the respiratory route was acceptable. Furthermore, factor analysis and cluster analysis classified heavy metals into two groups, indicating common anthropogenic sources for Cr, Ni, Cu, Zn, Cd, Pb, As and Hg. In conclusion, urban street dusts from industrial and mining area of Baiyin, NW China were found polluted by heavy metals and the pollution would pose an obvious non-carcinogenic risk to preschool children.

Phytoremediation strategies for heavy metal-contaminated soil by selecting native plants near mining areas in Inner Mongolia

Phytoremediation technology, as an eco-friendly and cost-effective approach, is widely used to restore soil contaminated by heavy metal(loid)s. However, the adaptability and absorption capacity of plants to multiple elements are the crucial factors affecting the application of phytoremediation in mining areas. In this study, dominant native plant species and their paired soils were collected near a lead-zinc mine in Inner Mongolia, to assess the ecological risk of heavy metal(loid)s and phytoremediation potential. The results showed that Cd and As were the dominant soil pollutants, with levels of 90.91% and 100%, respectively, exceeding the risk intervention values for soil contamination of agricultural land. The rates of Pb, Cu, and Zn exceeding the risk screening values were 69.70%, 60.61%, and 96.97%, respectively. Extremely high ecological risk of heavy metal(loid)s was observed in this area. The ability of native plants accumulating heavy metals varied among species. The bioconcentration factor (BCF) varied from 0.14 to 2.59 for Cd, 0.02 to 0.45 for As, 0.06 to 0.76 for Pb, 0.05 to 2.69 for Cr, 0.15 to 1.00 for Cu, and 0.22 to 4.10 for Zn. Chinese Cinquefoil Herb (Potentilla chinensis Ser.) showed the potential to accumulate multiple toxic elements based on the biomass, shoot content, translocation factor (TF), BCF, and metal extraction rate (MER), while, other species showed the potential to accumulate single toxic element: goosefoot (Chenopodium album L.), Lespedeza daurica (Laxm.) Schindl. and peashrubs (Caragana korshinskii Kom.), Herba Artemisiae Scopariae (Artemisia capillaris Thunb.), alfalfa (Medicago sativa L.), and Moldavian Dragonhead (Dracocephalum moldavica L.) for Cd, As, Cr, Cu, and Zn, respectively. Furthermore, wild leek (Allium ramosum L.), cogongrass (Imperata cylindrica (L.) Beauv.), fringed sagebrush (Artemisia frigida Willd.), and field bindweed (Convolvulus arvensis L.) were selected for phytostabilization of specific elements, considering the heavy metal contents in the roots and low TF values. This study provides a reference for selecting appropriate species for the remediation of heavy metal-contaminated soils in certain mining areas.

Intercropping Sedum alfredii Hance and Cicer arietinum L. does not present a suitable land use pattern for multi-metal-polluted soil

Intercropping of specific accumulators with industrial crops is used in moderately metal contaminated agricultural land. The distribution characteristics and environmental risks of non-accumulated ions in intercropping fields have rarely been reported. This study analyzed dissolved organic matter (DOM) fractionation and metal chemical forms to investigate the bioavailability, transformation, and uptake of non-hyperaccumulated metals in different cultivation patterns of a Cd hyperaccumulator (Sedum alfredii Hance) and a commercial crop (Cicer arietinum L.). The study focused on the distribution and transformation of heavy metals, with a particular emphasis on the role of DOM in intercropping. The contents of DOM in the rhizosphere soils of the Cd hyperaccumulator monoculture and the intercropping field were obviously greater than the DOM concentration in the commercial crop monoculture. The content of soluble Cd was significantly lower in the former two planting patterns than in the latter. In contrast, soluble Pb and Cu exhibited opposite content characteristics. In addition, the metal extraction ability of DOM extracted from the C. arietinum monoculture was lower than those from the Cd hyperaccumulator monoculture and the intercropping field. The concentrations of Cd in both below-ground and aerial parts of C. arietinum intercropping were significantly lower than those in its monoculture, since S. alfredii depleted soil Cd. Contrastingly, the contents of Cu and Pb in C. arietinum harvested from intercropping were significantly greater than those in its monoculture because the intercropped Cd hyperaccumulator activated Cu and Pb by changing soil DOM content and fractionations without absorbing them. The findings provide valuable insights into the use of intercropping to remediate moderately metal-contaminated agricultural land and highlight the potential risks associated with intercropping in multi-metal-contaminated fields.

Spatial distribution, environmental risks, and sources of potentially toxic elements in soils from a typical abandoned antimony smelting site

The rapid development of the smelting industry increases the release of antimony (Sb) into the soil environment, which threatens human health and ecosystems. A total of 87 samples were collected from an abandoned Sb smelting site to evaluate pollution characteristics and environmental risks of the potentially toxic elements (PTEs). The contents of As, Cu, Ni, Pb, Sb, and Zn in the fresh soils determined by P-XRF were 131, 120, 60, 145, 240, and 154 mg/kg, respectively, whilst following drying, grinding, and sieving pretreatments, the corresponding contents increased to 367, 179, 145, 295, 479, and 276 mg/kg, respectively. There was a significant correlation between the data obtained by P-XRF and ICP-OES in the treated samples, which showed the application feasibility of P-XRF. The average contents of Sb and As were 440.6 and 411.6 mg/kg, respectively, which exceeded the control values of the development land in GB 36600-2018. The ecological risk levels of the six PTEs decreased in the following order: As > Sb > Pb > Zn > Ni > Cu. Non-carcinogenic risk revealed that As, Pb, and Sb posed health risks for children, whilst for carcinogenic risk, the risk values for As and Ni were higher than the limit values for both children and adults. Anthropogenic sources accounted for more than 70.0% of As, Pb, and Sb concentrations in soils, indicating a significant influence on PTEs accumulation. The findings provide a basis for quick determination of the contamination characteristics and risk control of PTEs at Sb smelting sites.

Human urinary and blood toxicokinetics of beryllium after accidental exposure

PURPOSE

Beryllium is known to have adverse health effects and is classified as carcinogenic to humans. However, data on systemic beryllium exposure in humans are rare and especially human toxicokinetics are largely uncharted. As such, the first reported multi-annual course of blood and urine concentrations after a high exposure scenario provides important new insights.

METHODS

For a medical follow-up biomonitoring samples were collected for 56 months from a male subject after an accidental and multi-faceted high exposure. Sampling started on day 2 post-exposure for urine and day 147 for blood. The samples were analyzed by inductively coupled mass spectrometry (ICP-MS) and plotted longitudinally as a function of time. Terminal half-lives were calculated assuming a first-order elimination process.

MAIN FINDINGS

Both matrices showed highly increased initial concentrations (about 100-fold), despite the 147-day delay in blood sampling, and a marked decline over time. In urine, a two-phase excretion process was suspected based on the longitudinal data. Calculations gave terminal half-lives of 117.5 days and 666.5 days for phases 1 and 2, respectively. Blood kinetics called for a terminal half-life of 103.5 days. Elimination kinetics in blood and urine were comparable, simultaneously gathered samples showed an excellent correlation (R² = 0.985).

PRINCIPAL CONCLUSIONS

The long-term follow-up after a high initial exposure to beryllium provides the first detailed insights into the elimination course of systemically available beryllium in humans. Conform kinetics of beryllium in urine and blood and the strong correlation between both parameters indicate high data validity and support the good representation of the current systemically available beryllium by urine and blood concentration in humans. The relatively long terminal half-lives in both matrices suggest a possible accumulation in humans in case of repeated exposures.

Hydrodynamic release of Pb, Zn, and Cd from impermeable tailings as deduced from physical parameters evolution and multivariate statistical analysis: case study of Jbel Ressas mine waste (North Tunisia)

Tailings are one of the largest pollutant sources in the world. The wind and water leaching were often considered the main distribution tool of their pollutants. However, the carbonate crust precipitation has negated the trace toxic element (TTE) release. To identify the release mode of Pb, Zn, and Cd from mine wastes, the hydrodynamic evolution of waste piles was considered. The macroscopic and microscopic observation, the grain sizes, cohesion particles, density, hydraulic conductivity, and Pb, Zn, and Cd concentrations performed from eight drill cores of the two waste dumps and the principal component and the hierarchical cluster analysis showed that the physical properties of waste piles closely controlled the TTE mobility and migration from the tailings. The obtained data also showed that the upper carbonate layers were first eroded by wind and rainfall. Then, the formation of an impermeable carbonate crust limited the Pb, Zn, and Cd releases. However, the hydrodynamic evolution of the underneath layers was different. As the high pile waste sediments' weight meaning the lithostatic pressure (P_l), the geostatic ratios (λ = P_f/P_l) were in DII and DIII dumps superior to 0.29 and 0.26, respectively. Therefore, the overpressured fluids increased the mineral dissolution, including the sulfides and carbonates of metals, and hydraulic fracturing that raised the percentages of the mobile TTE and migration indexes. By the secondary pore and fracture volumes, the polluted fluids were progressively channeled towards the underpressured marge (dumps edge) by repetitive (polyphase) fluid pulsations.

Pollution and Potential Ecological Risk Evaluation of Heavy Metals in the Bottom Sediments: A Case Study of Eutrophic Bukwałd Lake Located in an Agricultural Catchment

Metals are natural components of the earth's crust and are essential elements in the metabolism of fauna and flora. However, some metals at high concentrations may pose an ecological risk. Ecological risk analysis is one of the best methods for detecting potential metal pollution problems and its impact on ecosystems. This study analyzed the potential ecological risk and contamination from heavy metals (Cd, Cu, Pb, Ni, Cr, and Zn) in bottom sediments. It analyzed the spatial variability of heavy metal concentrations in the bottom sediments of Lake Bukwałd. The potential ecological risk index (RI) was used to assess the impact of pollutants accumulated in bottom sediments on the environment. In addition to RI, the geochemical index (Igeo) and contamination factor (CF) were also calculated. The pollutant loading index (PLI) was used to compare the average content of metals in the bottom sediments of lakes. The obtained results indicate that agricultural activity determined the quality of the bottom sediments of the reservoir and the spatial content of trace metals in them. Higher concentrations of elements were found in sediments collected from the agricultural catchment, whereas the lowest concentrations were observed near the outflow from the lake. The calculated RI value was 153.3, representing a moderate ecological threat risk. The concentration of cadmium had the greatest influence on the value of the indicator. The analysis of the scale of pollution of bottom sediments using the geochemical index showed that the bottom sediments in terms of the content of most of the trace metals tested are class II. In Cu and Zn, the Igeo index classified these deposits as class 0 and class I. The highest CF values were determined for Cr, Ni, and Pb and classified as significant contamination. The remaining elements were classified as moderately contaminated. The designated PLI was 2.49, suggesting immediate action to reduce pollution and prevent the degradation of the lake.

A comprehensive study of potentially toxic element contamination and source quantitative assessment by positive matrix factorization model: risk from the fine road dust of Chehe mining area, China

Extreme mining activities can risk human life and the environment via potentially toxic elements (PTEs) in road dust, thus making their quantification and assessment unavoidable. For this purpose, we collected 50 fine road dust samples from the Chehe mining area, China, to quantify the level of contamination and ecological and health risks of PTEs comprising As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb, and Zn, and their quantitative source apportionment using the positive matrix factorization model (PMF). Results indicated that the average values of Cd, Sb, As, Zn, Pb, and Cu in road dust were 1555.21, 586.78, 429.68, 429.43, 72.88, and 26.61 times higher than their background values. Pollution indices of PTEs revealed a strong level of contamination by Cd, Sb, As, Zn, and Pb, which were extremely polluted in the study area. The average values of the Nemerow integrated risk index (NIRI) and potential ecological risk index (RI) were 104.09 and 86.49 times the highest risk limit, respectively, which are extremely high ecological risks. Based on PMF for quantitative source identification, mining activities and fuel combustion were the main sources of PTEs in road dust contributing 57.25% and 35.95%, respectively. Furthermore, the health risk assessment indicated that Sb, As, Cr, Cd, and Pb in the Chehe road dust could lead to significantly serious carcinogenic and non-carcinogenic risks to both children and adults. The results of this study could be used to opt for strategies to mitigate the ecological and human health risk in the mining area of Hechi, China.

Four-year population exposure study: Implications for the effectiveness of e-waste control and biomarkers of e-waste pollution

E-waste pollution has emerged as a significant environmental concern. To assess the impact of e-waste control on human pollutant exposure risk and identify appropriate biomarkers to classify e-waste pollution levels, we performed longitudinal population exposure monitoring research in an e-waste recycling area in China after e-waste control. The urinary levels of oxidative stress markers and typical pollutants emitted during e-waste recycling, including heavy metals, polycyclic aromatic hydrocarbons (PAHs), and volatile organic compounds (VOCs), were continuously monitored in the surrounding population (including 275 children and 485 adults) from 2016 to 2019 using high-performance liquid chromatography-tandem mass spectrometry and inductively coupled plasma-mass spectrometry. The results showed that exposure to PAHs, VOCs and heavy metals was significantly associated with oxidative stress levels in urine. After e-waste control, the exposure levels of most PAHs and VOCs and a few heavy metals in the population significantly decreased. Interestingly, the level of 8-hydroxy-2'-deoxyguanosine (a biomarker of oxidative DNA damage) in children significantly decreased by 17.6 %, from 9.45 μg/g CRE in 2017 to 7.79 μg/g CRE in 2019 (p < 0.01). Thus, implementing e-waste control measures effectively reduced the human exposure risk to e-waste pollutants. Urinary tin (Sn), s-phenylmercapturic acid (PMA), 2-&3-hydroxyfluorene (2-&3-OHF), 3-hydroxyphenanthrene (3-OHPhe), and 1-hydroxypyrene (1-OHP) levels decreased significantly and monotonically over time (p < 0.01). The levels of urinary Sn and PMA in combination with 1-OHP, 2-&3-OHF, or 3-OHPhe as biomarkers demonstrated an excellent ability to classify e-waste pollution. These biomarkers will facilitate evaluations of the effectiveness of the governmental pollution regulations and policy measures. Additionally, children were generally exposed to higher levels of heavy metals and VOCs and suffered higher levels of oxidative stress damage than adults, suggesting that children are more vulnerable to e-waste pollution. This work will provide a reference for e-waste management and control.

Potential hot spots contaminated with exogenous, rare earth elements originating from e-waste dismantling and recycling

Dismantling and recycling e-waste has been recognized as a potential emission source of rare earth elements (REEs). However, the presence of REEs in typical regional soils has yet to be studied. Given the potential health implications of such soil contamination, it is vital to study the characteristics, spatial distribution, and pollution level of REEs caused by e-waste dismantling as well as determine the influencing mechanism. This study focused on Guiyu Town as an example site, which is a typical e-waste dismantling base. From the site, 39 topsoil samples of different types were collected according to grid distribution points. Soil profiles were also collected in the dismantling and non-dismantling areas. The REE characteristic parameters showed that the REE distribution was abnormal and was affected by multiple factors. The results of the integrated pollution index showed that approximately 61.5% of soil samples were considered to be lightly polluted. Spatial distribution and correlation analysis showed that hot spots of REE-polluted soil coincided with known, main pollution sources. Moreover, there was a significant negative correlation (p ≤0.05) between the REE concentration and the distance from the pollution source. E-waste disassembly and recycling greatly affect the physical and chemical properties of the surrounding soil as well as downward migration areas. In the disassembly area, REE accumulated more easily in the surface layer (0-20 cm). Geographical detector results showed that distance factor was the main contribution factor for both light rare earth elements (LREE) and heavy rare earth element (HREE) (q = 34.59% and 53.33%, respectively). REE distribution in soil was nonlinear enhanced by different factors. Taken together, these results showed that e-waste disassembling and recycling not only directly affected the spatial distribution of REEs, but that their distribution was also affected by land use type and soil properties.

Potentially toxic elements contents and the associated potential ecological risk in the bottom sediments of Hrazdan river under the impact of Yerevan city (Armenia)

This research aims to assess the ecological status of the Hrazdan river (Armenia) section that flows through Yerevan. The distribution of potentially toxic elements (PTE) (Cr, V, As, Zn, Cu, Ni, Co, Mn, Pb, Ti, Mo, Fe, and Ba), the bottom sediments pollution level, and the ecological risk were assessed employing the single pollution index (SPI), the enrichment factor (EF), the geo-accumulation index (I_geo), and the potential ecological risk index (RI). On sampling sites, water quality parameters (turbidity, DO, electrical conductivity (EC), salinity, TDS, pH, temperature °C) were measured as well. The correlation analysis revealed a significant correlation between Zn-Cu, Pb; Cu-Pb, Mo; Co-Fe, Ti pointing out similar sources and origination of these elements. The results indicated that the content of the studied elements in the Hrazdan bottom sediments exceeded the background content in urban soils, which was due to a set of geological and anthropogenic factors. High contents of elements were determined on the sampling sites spatially confined to the residential and industrial areas. According to EF and I_geo data, the priority bottom sediment contaminants are As, Pb, Mo, Zn, V, and Cu. The RI value varies from 196 to 316 with the mean of 246 which corresponds to the moderate-level ecological risk. On the whole, a moderate (77.8%) and a considerable (22.2%) ecological risk was revealed. The major source of Pb, Cu, Zn, and Mo contents was identified as the surface runoffs in the urban environment. This was verified by the cluster analysis results.

Impacts of water deficit and post-drought irrigation on transpiration rate, root activity, and biomass yield of Festuca arundinacea during phytoextraction

Water deficit is a hazardous threat to phytoremediation, while the photosynthetic efficiency of plant leaves can rapidly recover after post-drought irrigation, thereby enhancing the root activity, transpiration rate, and metal accumulation capacity of plants. This study was designed to test whether the phytoextraction effect of drought-stressed Festuca arundinacea could recover to normal levels after post-drought irrigation. Two drought stress levels (D₁, slight stress and D₂, moderate stress) were carried out at one of five plant growth stages (G₁, germinating; G₂, tillering; G₃, jointing; G₄, booting; and G₅, flowering). The results showed that drought stress, regardless of level, significantly decreased the transpiration rate of F. arundinacea by 38.9%-85.7%. The degree of reduction of this physiological index was significantly higher in D₁G₁ and D₂G₁ than in other treatments. The biomass yield and root activity in D₁G₃, D₁G₄, D₁G₅, D₂G₃, and D₂G₄ recovered and even surpassed the normal values after rewatering, suggesting that the detrimental effects of drought stress on F. arundinacea at certain growth stages can be compensated by post-drought irrigation. Drought stress also decreased the Cd uptake capacity of F. arundinacea, and the degree of reduction depended on the stress level and growth stage. Overcompensation for Cd accumulation was observed in D₁G₃, D₁G₄, D₂G₃, and D₂G₄ after post-drought irrigation. The results indicated that suitable irrigation strategies can improve the phytoextraction effect of F. arundinacea and conserve water resources in practice.

Source apportionment, ecological, and human health risks of toxic metals in road dust of densely populated capital and connected major highway of Bangladesh

This study investigates pollution levels, source apportionment, ecological, and human health risks associated with toxic metals (Pb, As, Hg, Cr, and Cd) in road dust from the most populated Dhaka city and a connected major highway in Bangladesh. The mean concentration of Pb, Hg, and Cd were 1.3, 29.3, and 13.2 times higher than their corresponding background values with spatially uneven distribution all over the study area. Metal pollution indices, the geo-accumulation index (Igeo), NIPI, and PI, indicated extreme contamination at many sites depending on local environmental factors. The potential ecological risk ([Formula: see text] revealed that 84% and 54% of samples showed the extreme ecological risk for Hg and Cd pollution, respectively. On the other hand, the potential ecological risk index (PERI) and Nemerow integrated risk index (NIRI) showed that most sampling sites suffered high to extreme ecological risk. Source apportionment using positive matrix factorization (PMF) identified coal combustion, and gasoline (50.14%), traffic exhaust (35.26%), and industrial and agriculture activity (14.60%) were the main source of toxic metals of the study area. Non-carcinogenic health risk indicated that adults are more vulnerable than children, and hazard index (HI) of Hg for both age groups and Cd for adults were significantly higher than the safe level. The carcinogenic risk (CR) levels of toxic metals were acceptable (10-6 to 10-4), although the maximum limit of Cr for children and As for adults was close to the unacceptable limit (10-4). Continual exposure to toxic metals through road dust might develop lifetime cancer risk in local inhabitants.

Influence of Drought Stress and Post-Drought Rewatering on Phytoremediation Effect of Arabidopsis thaliana

Globally, plants face large amounts of environmental stresses, which can inhibit their growth rate and element uptake capacity. Droughts are a critical limitation to plant growth in arid and semi-arid areas. Effects of drought stress and post-drought rewatering on the compensatory growth and Cd phytoremediation efficiency of Arabidopsis thaliana were estimated using slight and moderate drought conditions. Results showed compensatory growth can be induced by post-drought rewatering, as manifested by the increased dry weight and photosynthetic efficiency of the species under drought stress (particularly slight stress) as compared to those of the control. Slight stress increased concentrations of Cd in roots and leaves of A. thaliana by elevating its transpiration rate, whereas moderate stress induced the opposite effect. When the species was subjected to slight stress, Cd concentrations in plant tissues surpassed those in the control after rewatering, indicating that post-drought rewatering can compensate for the detrimental impacts caused by slight drought in A. thaliana. At the end of the experiment, slight and moderate drought stresses increased the Cd extraction ability of the species by 48.9% and 12.7%, respectively, compared to the control. This study demonstrates compensatory effects of post-drought rewatering on the Cd phytoextraction capacity of A. thaliana and suggests that suitable water deficit irrigation practices can enhance soil remediation efficiency and simultaneously save water in the field.

Effect of light combination on the characteristics of dissolved organic matter and chemical forms of Cd in the rhizosphere of Arabidopsis thaliana involved in phytoremediation

Light, one of the most important natural resources for plant species, significantly influences the biomass yield and nutrient uptake capacity in plants. Light sources with different spectra combinations can impact the bioavailability, toxicity, and solubility of heavy metals in soils by altering the concentrations and fractionations of soil dissolved organic matter (DOM). A series of light irradiation treatments were performed to evaluate the influence of red, yellow, and blue lights on the characteristics of DOM in the rhizosphere soils of Arabidopsis thaliana. The results showed that monochromatic red light significantly raised the levels of DOM and proportions of hydrophilic fractionations in the rhizosphere of A. thaliana relative to the control, while monochromatic blue light had the opposite effect. Moreover, the proportions of hydrophobic acid, which can mobilize Cd effectively, also raised with increasing doses of red light, which stimulated Cd mobilization. The application of yellow light not only increased the levels of hydrophobic acid in monochromatic red light treatment but also decreased the proportion of hydrophobic fractions in monochromatic blue light treatment, partially weakening the negative impacts of pure blue light on soil Cd activation. Moreover, DOM from the combined red, yellow, and blue lights resulted in a significantly stronger Cd extraction efficiency than the other light irradiation treatments, consequently enhancing the Cd phytoextraction efficiency of A. thaliana. The findings of this study demonstrated that a suitable light combination could enhance the phytoremediation effect of A. thaliana by activating soil Cd, and this method can be extrapolated to the real field, where light irradiation can be easily applied and modulated.

Forty years studies on polychlorinated biphenyls pollution, food safety, health risk, and human health in an e-waste recycling area from Taizhou city, China: a review

E-waste generation has become a serious environmental challenge worldwide. Taizhou of Zhejiang Province, situated on the southeast coastline of China, has been one of the major e-waste dismantling areas in China for the last 40 years. In this review, we focused on the polychlorinated biphenyl (PCB) trends in environmental compartments, burden and impact to humans, food safety, and health risk assessment from Taizhou, China. The review suggested that PCBs showed dynamic trends in air, soil, water, biodiversity, and sediments. Soils and fish samples indicated higher levels of PCBs than sediments, air, water, and food items. PCB levels decreased in soils with the passage of time. Agriculture soils near the e-waste recycling sites showed more levels of total PCBs than industrial soils and urban soils. Dioxin-like PCB levels were higher in humans near Taizhou, suggesting that e-waste pollution could influence humans. Compared with large-scale plants, simple household workshops contributed more pollution of PCBs to the environment. Pollution index, hazard quotient, and daily intake were higher for PCBs, suggesting Taizhou should be given priority to manage the e-waste pollution. The elevated body burden may have health implications for the next generation. The areas with stricter control measures, strengthened laws and regulations, and more environmentally friendly techniques indicated reduced levels of PCBs. For environment protection and health safety, proper e-waste dismantling techniques, environmentally sound management, awareness, and regular monitoring are very important.

Strategies of cadmium and copper uptake and translocation in different plant species growing near an E-waste dismantling site at Wenling, China

This study aimed to explore the interactions between cadmium (Cd) and copper (Cu) during uptake and translocation in plants growing in soil polluted with heavy metals derived from electronic waste (E-waste). We collected the roots, stems, leaves, and root-surrounding soils of ten dominant plant species growing in farmland near an E-waste dismantling site, and analyzed their Cd and Cu concentrations. Among the ten plant species, Echinochloa crus-galli (L.) P. Beauv., Cucurbita moschata (Duch. ex Lam.) Duch. ex Poiret, Phragmites australis (Cav.) Trin. ex Steud., and Benincasa hispida (Thunb.) Cogn. accumulated Cd (2.40-4.56 mg kg^-1) and Cu (19.60-35.21 mg kg^-1) in the roots. In Polygonum hydropiper L. and Sesbania cannabina (Retz.) Poir., the Cd (0.50-0.81 mg kg^-1) and Cu (11.04-15.55 mg kg^-1) concentrations were similar among the three organs. Glycine max (L.) Merr. accumulated more Cu in the roots (16.42 mg kg^-1) than in the stems (5.61 mg kg^-1) and leaves (7.75 mg kg^-1), and accumulated Cd at similar levels in the three organs (0.65-0.99 mg kg^-1). Sesamum indicum L., Bidens pilosa L., and Solidago decurrens Lour. accumulated Cd at similar levels among the three organs (0.16-3.34 mg kg^-1) and accumulated less Cu in the stems (6.89-8.28 mg kg^-1) than in the roots (12.61-21.63 mg kg^-1) and leaves (12.93-22.38 mg kg^-1). S. indicum had a stronger capacity to accumulate and translocate Cd and Cu according to transfer coefficient and translocation factor. The concentrations of Cd and Cu in soils were significantly positively correlated with those in the roots (p<0.01) but not those in the stems and leaves. We detected significantly positive correlations between Cd and Cu concentrations in the roots and leaves (p<0.01) but not in the stems. These results suggest that there is a synergetic strategy of Cd and Cu transport from soils to the roots and from the roots to the leaves, while the stems may not be the key organ controlling Cd and Cu transport in plants. These findings have important implications for the phytoremediation of soils contaminated with Cd and Cu, the mechanisms of plant Cd and Cu transport, and the food safety of agricultural products.

Increased intestinal permeability with elevated peripheral blood endotoxin and inflammatory indices for e-waste lead exposure in children

Lead (Pb) entering the body through different channels can damage the function of intestinal mucosal barrier and cause the body stressful inflammatory response to enhance. This study conducted a cross-sectional study to investigate the effects of Pb exposure on intestinal permeability in children by measuring the level of bacterial endotoxin and index of inflammatory cell types in peripheral blood. From November to December 2018, we recruited 187 participants aged 3-6 years by stratified randomization, from an electronic-waste-exposed group (n = 82) and a referent group (n = 105). General demographic information, past history of the digestive system in child, and family situation were informed by children's guardians with questionnaires. Children in the exposed group showed lower weight, height, and body mass index while more diarrhea in a month. Blood Pb and plasma endotoxin were elevated in exposed children than referent children and the positive relationship between them was shown in all children [B (95% CI): 0.072 (0.008, 0.137), P = 0.033]. Peripheral monocyte counts and leukotriene B₄ (LTB₄) levels were significantly increased in the exposed group. Endotoxin levels were positively correlated with neutrophils, monocytes, and LTB₄ [B (95% CI): 0.054 (0.015, 0.093), 0.018 (0.005, 0.031), and 0.049 (0.011, 0.087), respectively, P < 0.05]. To sum up, the exposed children showed lower physical growth levels, poorer gut health, and increased intestinal permeability, which was related to high blood Pb and peripheral inflammatory indices. These results suggest the possible adverse impact of environmental Pb exposure on the intestinal health of children.

Mobility, spatial variation and human health risk assessment of mercury in soil from an informal e-waste recycling site, Lagos, Nigeria

Spatial variations and mobility of mercury (Hg) and Hg associations with other potentially toxic elements (PTEs) were studied in soil samples from Alaba, the largest e-waste recycling site in Nigeria and West Africa. Total Hg concentration was determined in surface soil samples from various locations using cold vapour atomic absorption spectrometry (CVAAS) following microwave-assisted acid extraction, while sequential extraction was used to determine operationally defined mobility. The concentrations of the PTEs arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), mercury (Hg), nickel (Ni), lead (Pb) and zinc (Zn) metals were determined using inductively coupled plasma mass spectrometry (ICP-MS) following microwave-assisted digestion with aqua regia. Total Hg concentration ranged from < 0.07 to 624 mg/kg and was largely dependent on the nature and intensity of e-waste recycling activities carried out. Mobile forms of Hg, which may be HgO (a known component of some forms of e-waste), accounted for between 3.2 and 23% of the total Hg concentration, and were observed to decrease with increasing organic matter (OM). Non-mobile forms accounted for >74% of the total Hg content. In the main recycling area, soil concentrations of Cd, Cd, Cu, Hg, Mn, Ni, Pb and Zn were above soil guideline values (Environment Agency in Science Report, 2009; Kamunda et al., 2016). Strong associations were observed between Hg and other PTEs (except for Fe and Zn) with the correlational coefficient ranging from 0.731 with Cr to 0.990 with As in April, but these correlations decreased in June except for Fe. Hazard quotient values > 1 at two locations suggest that Hg may pose health threats to people working at the e-waste recycling site. It is therefore recommended that workers should be investigated for symptoms of Hg exposure.

Using Polychlorinated Naphthalene Concentrations in the Soil from a Southeast China E-Waste Recycling Area in a Novel Screening-Level Multipathway Human Cancer Risk Assessment

Polychlorinated naphthalene (PCN) concentrations in the soil at an e-waste recycling area in Guiyu, China, were measured and the associated human cancer risk due to e-waste-related exposures was investigated. We quantified PCNs in the agricultural soil and used these concentrations with predictive equations to calculate theoretical concentrations in outdoor air. We then calculated theoretical concentrations in indoor air using an attenuation factor and in the local diet using previously published models for contaminant uptake in plants and fruits. Potential human cancer risks of PCNs were assessed for multiple exposure pathways, including soil ingestion, inhalation, dermal contact, and dietary ingestion. Our calculations indicated that local residents had a high cancer risk from exposure to PCNs and that the diet was the primary pathway of PCN exposure, followed by dermal contact as the secondary pathway. We next repeated the risk assessment using concentrations for other carcinogenic contaminants reported in the literature at the same site. We found that polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) and PCNs caused the highest potential cancer risks to the residents, followed by polychlorinated biphenyls (PCBs). The relative importance of different exposure pathways depended on the physicochemical properties of specific chemicals.

Environmental health risk assessment of heavy metal exposure among children living in an informal e-waste processing village in Viet Nam

This study was conducted to compare the exposure levels of five heavy metals via different pathways based on the field samplings and questionnaire surveys of children residing in an informal e-waste processing village and a reference village in Viet Nam. The findings revealed that levels of the total average daily intake (ADI) of the five heavy metals collected from a child at the exposed village were 3.90 times higher (p < 0.01) than that of a child at the reference village. Ingestion of cooked rice was the largest contributor to the total ADI of the children tested at both villages. However, the risks from water drinking and dermal contact of soil were negligible. The total non-carcinogenic risk and carcinogenic risk in an exposed child were significantly higher (p < 0.01) than their respective risks in a reference child. The non-carcinogenic risk to an exposed child was likely to occur, while the risk to a reference child was negligible. The carcinogenic risks found in children from both of the villages, however, were higher than the acceptable values, indicating the potential health risks to the children from both villages. The susceptibility of children to heavy metal contaminations shown in this study suggests that a mitigating measure need to be initiated jointly by a public agency and a private organization to prevent children from the risks of being exposed to the contaminants.

Potentially toxic elements pollution in road deposited sediments around the active smelting industry of Korea

Potentially toxic elements (PTEs) were investigated in the different sizes of road deposited sediments (RDS) around the active smelting industry to understand their sources and to assess the pollution and ecological risk levels. The highest PTEs concentrations was shown near the raw materials import port and the smelting facilities. The fine particles of RDS showed extremely high PTEs concentrations. Zn has the highest mean concentration in the < 63 μm particle size of RDS, followed by Pb > Cu > As > Cr > Ni > Cd > Hg. The PTEs concentrations of this study were the highest values compared to the soils around the smelter and the RDS in urban and industrial areas in the world. This indicates that these PTEs pollution in RDS were mainly attributed to the transportation of raw materials for the smelting industry. According to nemerow pollution index calculation, RDS at all sampling sites with particles of less than 250 mm was seriously polluted with PTEs. The ecological risk was also found to be very high in all RDS fractions and highly toxic elements such as Cd, Pb and Hg pose extremely risk. Given the total amounts PTEs in the road surface, it is necessary to apply RDS removal management plan to reduce the PTEs pollution.

Environmental Heavy Metal Contamination from Electronic Waste (E-Waste) Recycling Activities Worldwide: A Systematic Review from 2005 to 2017

The recycling of electronic waste (e-waste) contaminates ecosystems with metals, though a compilation of data from across sites worldwide is lacking, without which evidence-based comparisons and conclusions cannot be realized. As such, here, a systematic review of the literature was conducted to identify peer-reviewed studies concerning e-waste sites (published between 2005 and 2017) that reported on the concentration of heavy metals (Cd, Hg, As, Pb and Cr) in soil, water and sediment. From 3063 papers identified, 59 studies from 11 countries meeting predefined criteria were included. Reported metal concentrations were summarized, and a narrative synthesis was performed. This review summarized 8286 measurements of the aforementioned metals in soils (5836), water (1347) and sediment (1103). More than 70% of the studies were conducted in Asia. In nearly all cases, the average metal concentrations in a particular medium from a given site were above guideline values; suggesting soils, water and sediment at, or near, e-waste recycling sites are contaminated. Across all media, concentrations of Pb were generally highest, followed by Cr, As, Cd and Hg. The synthesized information demonstrates that e-waste sites worldwide are contaminated with metals, that geographic data gaps exist, that the quality of most studies can be improved and that action is needed to help reduce such levels to protect human health and the environment.

Ecological risk assessment of arsenic, cadmium, copper, and lead contamination in soil in e-waste separating household area, Buriram province, Thailand

This study aimed to determine the arsenic (As), copper (Cu), cadmium (Cd), and lead (Pb) concentrations in the soil at e-waste separating houses in Buriram province. Soil samples were collected from five e-waste separating and five non-separating houses in each of two neighboring communities and from six reference houses located approximately 4 km away from the e-waste community. At each selected house, the surface (0-15-cm depth) and the subsurface (15-30-cm depths) soils were taken to be digested by a microwave digester and then analyzed for the heavy metal contents by atomic absorption spectrophotometry. The As, Pb, and Cd levels in the e-waste separating sites ranged from < 0.012 to 1.380, 0.110 to 15.283, and < 0.014 to 0.284 mg/kg, respectively, which were not in excess of the Thai standard level for residential soil (As = 3.9, Pb = 400, and Cd = 37 mg/kg), while Cu ranged from 1.180 to 380.413 mg/kg and exceeded the intervention value (190 mg/kg) of contaminated soil at three sites from a total of ten sampling sites. The physical e-waste dismantling activity enhanced the As, Cd, and Cu contamination levels in the surface soils. Ecological risk assessment revealed that the risk posed by the heavy metals in soils was higher at the e-waste separating houses than those at the non-separating sites and was mainly attributed to the levels of Cu > As > Cd > Pb for the surface soils and Cd > Cu > As > Pb for the subsurface soil. The association of the heavy metal soil levels with e-waste activity showed that if the e-waste activities were continuously operated, the As and Cu levels in the surface soil were more likely to exceed those levels in the reference houses. A good procedure for e-waste dismantling is necessary to be developed and implemented to prevent soil contamination and other related environmental problems.

Global occurrence, chemical properties, and ecological impacts of e-wastes (IUPAC Technical Report)

The waste stream of obsolete electronic equipment grows exponentially, creating a worldwide pollution and resource problem. Electrical and electronic waste (e-waste) comprises a heterogeneous mix of glass, plastics (including flame retardants and other additives), metals (including rare Earth elements), and metalloids. The e-waste issue is complex and multi-faceted. In examining the different aspects of e-waste, informal recycling in developing countries has been identified as a primary concern, due to widespread illegal shipments; weak environmental, as well as health and safety, regulations; lack of technology; and inadequate waste treatment structure. For example, Nigeria, Ghana, India, Pakistan, and China have all been identified as hotspots for the disposal of e-waste. This article presents a critical examination on the chemical nature of e-waste and the resulting environmental impacts on, for example, microbial biodiversity, flora, and fauna in e-waste recycling sites around the world. It highlights the different types of risk assessment approaches required when evaluating the ecological impact of e-waste. Additionally, it presents examples of chemistry playing a role in potential solutions. The information presented here will be informative to relevant stakeholders seeking to devise integrated management strategies to tackle this global environmental concern.

An analysis of the versatility and effectiveness of composts for sequestering heavy metal ions, dyes and xenobiotics from soils and aqueous milieus

The persistence and bioaccumulation of environmental pollutants in water bodies, soils and living tissues remain alarmingly related to environmental protection and ecosystem restoration. Adsorption-based techniques appear highly competent in sequestering several environmental pollutants. In this review, the recent research findings reported on the assessments of composts and compost-amended soils as adsorbents of heavy metal ions, dye molecules and xenobiotics have been appraised. This review demonstrates clearly the high adsorption capacities of composts for umpteen environmental pollutants at the lab-scale. The main inferences from this review are that utilization of composts for the removal of heavy metal ions, dye molecules and xenobiotics from aqueous environments and soils is particularly worthwhile and efficient at the laboratory scale, and the adsorption behaviors and effectiveness of compost-type adsorbents for agrochemicals (e.g. herbicides and insecticides) vary considerably because of variabilities in structure, topology, bond connectivity, distribution of functional groups and interactions of xenobiotics with the active humic substances in composts. Compost-based field-scale remediation of environmental pollutants is still sparse and arguably much challenging to implement if, furthermore, real-world soil and water contamination issues are to be addressed effectively. Hence, significant research and process development efforts should be promptly geared and intensified in this direction by extrapolating the lab-scale findings in a cost-effective manner.

Source-specific ecological risk analysis and critical source identification of heavy metals in road dust in Beijing, China

To explore the spatial variation of source-specific ecological risks and identify critical sources of heavy metals in road dust, 36 road dust samples collected in Beijing in March 2017 were analyzed for heavy metals. A new method that takes into consideration the heavy-metal toxic response and is flexible to changes in the number of calculated heavy metals, called the Nemerow integrated risk index (NIRI), was developed for ecological risk assessment. The NIRI indicated that heavy metals posed considerable to high risks at the majority of sites, and 22 % of the sites suffered extreme risk in spring (NIRI > 320). Four main sources were identified based on positive matrix factorization (PMF): traffic exhaust, fuel combustion, construction, and use of pesticides and fertilizers. Owing to the lower toxic response factors of representative heavy metals of fuel combustion than those of other sources, although fuel combustion had the highest contribution (34.21 %) to heavy metals in spring, it only contributed 5.57 % to ecological risks. Critical sources and critical source areas were determined by considering the contributions to both heavy metals and ecological risks. The use of pesticide and fertilizer and traffic-related exhaust were identified as critical sources of heavy metals in spring. Source-specific ecological risks and critical sources of heavy metals changed with the changing seasons, which suggests that different strategies should be adopted in different seasons.

The phytoremediation efficiency of Eucalyptus globulus treated by static magnetic fields before sowing

Eucalyptus globulus pre-treated by static magnetic fields of 30, 60, 120, 150 and 400 mT (mT) before sowing were used in a 45-day experiment to remediate soil containing Cd, Hg, Pb, Zn, Cr and Cu. The influence of magnetic fields on its remediation efficiency was evaluated. Magnetic fields with strength of 30, 60, 120 and 150 mT increased the biomass yield of the species by 3.1, 19.4, 48.1 and 60.9%, respectively, while 400 mT decreased the yield by 16.7%. Comparing with the control exposed only to the earth's geomagnetic field, all plants pre-treated by static magnetic field had significantly higher metal concentrations with the highest values achieved in the field of 400 mT. Higher transpiration rate of the plants along with exposure to static magnetic fields induced lower soil moisture content and was beneficial to environmental control because it could reduce the leachate during the phytoremediation process. Among all static magnetic field treatments, 150 mT was the best to improve the phytoremediation and alleviate the environmental risk, which shortened the time to purify Cd, Pb and Cu by 27.8-73.2%, 27.3-74.7% and 2.5-50.6%, respectively and intercepted 31.6-86.1% of the leachate. Therefore, static magnetic field with appropriate intensity is a suitable candidate to improve phytoremediation efficiency through enhancing the biomass production, toxin uptake and leachate interception.

Sensitivity of Eucalyptus globulus to red and blue light with different combinations and their influence on its efficacy for contaminated soil phytoremediation

The influence of combined red and blue light on the capacity of Eucalyptus globulus to phytoremediate a metal-polluted soil was evaluated in this study. Five combinations of blue and red light (0%, 10%, 25%, 50% and 100% blue) at the same intensity were used to treat E. globulus, and its biomass generation, metal uptake and water absorption in phytoremediation under different light treatments were assessed. The plant produced significantly more biomass under blue light, regardless of the ratio, than under single red or white light. The highest biomass was generated under the light ratio of B₁₀R₉₀. In addition, light combination influenced the metal concentrations in different plant tissues. The highest concentrations of Cd and Cu in roots appeared under the light ratio of B₀. All metals in plant shoots achieved their highest concentrations under the light ratio of B₁₀₀, except Pb. Comparing with control, red and blue light combined in varying proportions increased the efficiency remove Cd, Pb and Cu by 50.6-65.6, 71.1-88.7 and 28.9-70.6%, respectively,. The leachate volume under blue and red light combinations was 46.7-66.0% less than control with the combination of B₁₀R₉₀ mitigating the most metal loss. Light sources with different spectra combinations can enhance the phytoremediation efficiency of Eucalyptus globulus and alleviate leaching risk at the same time.

WEEE Treatment in Developing Countries: Environmental Pollution and Health Consequences-An Overview

In the last few decades, the rapid technological evolution has led to a growing generation of waste electrical and electronic equipment (WEEE). Not rarely, it has been exported from industrialized to developing countries, where it represents a secondary source of valuable materials such as gold, copper, and silver. The recycling of WEEE is often carried out without any environmental and health protection. This paper reviews recent literature dealing with the informal treatment of WEEE in developing regions, gathering and analyzing data on concentration of both inorganic and organic pollutants in the environment. Open burning practices are revealed as most polluting ‘technology’, followed by mechanical treatment and leaching. Significant levels of pollutants have been detected in human bodies, both children and adults, working in or living in areas with informal WEEE treatment.

Spatial Patterns of Potentially Hazardous Metals in Soils of Lin'an City, Southeastern China

Urban soils are strongly related to human health. In this study, Lin’an city was chosen as a typical small-scale city with which to study the spatial variation of potentially hazardous metals (PHMs) in urban soils and their potential ecological risks using multivariate analysis, geostatistics and GIS techniques. A total of 62 soil samples were collected from the study area. The results showed that the average concentrations of total soil Mn, Cu, Zn, Pb, Cr, Cd were 439.42, 42.23, 196.80, 62.55, 63.65, 0.22 mg·kg⁻¹, respectively. Compared with the background values and the environmental quality standards, these PHMs were accumulated in urban soils to some extent. The single potential ecological risk indices of PHMs indicated that Pb and Cd had relatively high ecological risks. The pH and most of the PHMs had significant correlations (p < 0.05). The principle components analysis (PCA) showed that Pb, Zn and Cu had similar pollution sources related to the vehicles’ exhaust emission; Mn and Cr were mainly from the parent materials; while Cd was from the emission of industrial manufactories. The spatial structures and distributions of PHMs and their corresponding available fractions had strong/moderate spatial autocorrelation, which were influenced by human activities.

Intercropping with sunflower and inoculation with arbuscular mycorrhizal fungi promotes growth of garlic chive in metal-contaminated soil at a WEEE-recycling site

Heavy metal (HM) pollution in agricultural soils due to the recycling of waste electrical and electronic equipment (WEEE) has become a serious concern, but most farmers cannot afford the economic losses of fallow land during remediation. Thus, it is imperative to produce low-HM crops while remediating the contaminated soils. A 17-week pot experiment was conducted to investigate the growth and HM (Cd, Cu, Pb, Cr, Zn, and Ni) acquisition of garlic chives (Allium tuberosum Rottl. ex Spreng.) intercropped with sunflower (Helianthus annuus L.) and inoculated with (I_+M) or without (I_-M) the arbuscular mycorrhizal (AM) fungus Funneliformis caledonium on a severely HM-contaminated soil that was collected from a WEEE-recycling site. Compared with the monoculture control, the I_-M treatment significantly (P < 0.05) decreased Cd, Cu, Cr, Zn, and Ni concentrations in the shoots of chives through rhizosphere competition and HM (except Cr) transfer from the root to the shoot of chives, and increased the average shoot fresh weight (i.e., yield) of chives by 794% by alleviating HM toxicity. Compared with the I_-M treatment_, the I_+M treatment significantly increased soil phosphatase activity as well as root mycorrhizal colonization of both sunflower and chives. The I_+M treatment had no effect on the tissue P concentration of sunflower but elevated the average dry biomass (shoot plus root) and P acquisition level of sunflower by 179% and 121%, respectively. In addition, the I_+M treatment significantly increased the P concentration in the root rather than in the shoot of chives and significantly increased the level of P acquisition by chives, increasing the average yield of chives by 229%. Simultaneously, the I_+M treatment significantly increased the level of HM (except Cd) acquisition by sunflower, enhancing the rhizosphere competition by sunflower over chives, and further reducing the transfer of all six HMs from root to shoot in the chives, and inducing significant decreases in chive shoot HM concentrations compared with the monoculture control. Furthermore, the I_+M treatment decreased the average total concentrations and increased the average DTPA-extractable concentrations of soil HMs. The results demonstrate the multifunctional role of AM fungi in the intercropping system for both vegetable production and phytoremediation on HM-contaminated soils.

Environmental pollution and human body burden from improper recycling of e-waste in China: A short-review

BRIEF BACKGROUND

E-waste generation has become a serious environmental challenge worldwide. The global quantity of e-waste was estimated 44.7 million metric tons (Mt) in 2016. The improper recycling of e-waste is still a challenging issue in developing countries.

OBJECTIVE

The objectives of this a review article to present comprehensive information of recent studied on environment pollution and effect on human health in China.

METHOD

The search engines consulted, period of publications reviewed 2015-2018. For search study, we used different key words: 'improper recycling', 'primitive recycling,' 'backyard recycling,' 'e-waste,' 'WEEE', and the studies related to improper recycling of e-waste.

RESULTS

According to reports, the e-waste recycled by unorganized sectors in China. These unorganized sector workers daily go for work, such as e-waste collection from consumer house and manual dismantling of e-waste by using simple method, at unauthorized workshop. These backyard workshop are reported in small clusters in or around city e.g., Qingyuan village; Taizhou, Longtang Town, Guiyu, nearby Nanyang River and Beigang River in China.

DISCUSSION

The earlier reported studies directed the heavy metals effect (causing effects both acute and chronic effects; respiratory irritation, reproductive problem, cardiovascular and urinary infection/disease) on human health. According the reports, the improper recycling of e-waste which need to be address for the environment protection and prevention of public health risk. However, if e-waste exposure is not avoided very well, the associated contamination will be continuing, and simultaneously needful to increase the awareness for proper e-waste management in China.

CONCLUSIONS

In order to solve the e-waste problem in China, more detail research is needed. Furthermore, for environment protection and health safety, the proper e-waste dismantling techniques, environmentally sound management, and the regular monitoring are very important.

Arbuscular mycorrhizal fungi alleviate the heavy metal toxicity on sunflower (Helianthus annuus L.) plants cultivated on a heavily contaminated field soil at a WEEE-recycling site

An 8-week pot experiment was conducted to investigate the growth and responses of sunflower (Helianthus annuus L.) to arbuscular mycorrhizal (AM) fungal inoculations on a heavily heavy metal (HM)-contaminated (H) soil and a lightly HM-enriched (L) soil, both of which were collected from a waste electrical and electronic equipment (WEEE)-recycling site. Compared with the L soil, the H soil induced significantly larger (P<0.05) concentrations of Cd, Cu, Pb, Cr, Zn and Ni in sunflower (except for root Cr and shoot Ni), which impaired the thylakoid lamellar folds in leaves. The biomasses and P concentrations of shoots and roots, as well as the total P acquisitions per pot were all significantly decreased (P<0.05). Both Funneliformis mosseae (Fm) and F. caledonium (Fc) inoculation significantly increased (P<0.05) root mycorrhizal colonization. For the L soil, AM fungal inoculations had no significant effects on the soil-plant system, except for a decrease of soil pH and increases of soil available P and DTPA-extractable Zn concentrations with the Fm-inoculated treatment. For the H soil, however, AM fungal inoculations significantly increased (P<0.05) the biomasses and P concentrations of shoots and roots, as well as the total P acquisitions per pot, and significantly reduced (P<0.05) the concentrations of HMs in shoots (except for Cu and Pb with Fm- and Fc- inoculated treatments, respectively) and alleviated the toxicity symptoms of HMs in thylakoid structure of leaves. AM fungal inoculations in the H soil also significantly increased (P<0.05) the shoot uptake of HMs (except for Cr), and tended to decrease the total concentrations of HMs in soils. This suggests the potential application of AM fungi for both reducing HM stress and promoting phytoextraction of HM-contaminated soils caused by WEEE recycling.

Temporal Variation and Ecological Risk Assessment of Metals in Soil Nearby a Pb⁻Zn Mine in Southern China

Metal contamination in soil from tailings induces risks for the ecosystem and for humans. In this study, the concentrations and ecological risks of Cd, Cu, Pb, and Zn in soil contaminated by a tailing from Yangshuo (YS) lead and zinc (Pb–Zn) mine, which collapsed for more than 40 years, were determined in 2015. The mean concentrations of Zn, Pb, Cu, and Cd were 1301.79, 768.41, 82.60, and 4.82 mg/kg, respectively, which, with years of remediation activities, decreased by 66.9%, 61.7%, 65.4%, and 65.3% since 1986, but still exceed the national standards. From 1986 to 2015, soil pH increased significantly, with available concentrations of Zn, Pb, Cu and Cd decreasing by 13%, 81%, 77%, and 67%, respectively, and potential ecological risk indexes (E_r) of the determined metals decreasing by more than 60%. Horizontally, total contents and percentages of available concentrations of Zn, Pb, Cu, and Cd decreased with the distance from the tailing heap in SD village, while pH values showed the reverse pattern. Vertically, Zn and Cd, Pb, and Cu showed similar vertical distribution patterns in the soil profiles. There was a slight downward migration for the determined metals in soil of M and H area and the mobility was in the order of Cd > Zn > Pb > Cu. It can be concluded that although concentrations and ecological risks of Cd, Cu, Pb, and Zn in soil decreased significantly, SD village is still a high risk area, and the priority pollutant is Cd.

Influence of direct and alternating current electric fields on efficiency promotion and leaching risk alleviation of chelator assisted phytoremediation

Direct and alternating current electric fields with various voltages were used to improve the decontamination efficiency of chelator assisted phytoremediation for multi-metal polluted soil. The alleviation effect of electric field on leaching risk caused by chelator application during phytoremediation process was also evaluated. Biomass yield, pollutant uptake and metal leaching retardation under alternating current (AC) and direct current (DC) electric fields were compared. The biomass yield of Eucalyptus globulus under AC fields with various voltages (2, 4 and 10 V) were 3.91, 4.16 and 3.67kg, respectively, significantly higher than the chelator treatment without electric field (2.71kg). Besides growth stimulation, AC fields increased the metal concentrations of plant tissues especially in aerial parts manifested by the raised translocation factor of different metals. Direct current electric fields with low and moderate voltages increased the biomass production of the species to 3.45 and 3.12kg, respectively, while high voltage on the contrary suppressed the growth of the plants (2.66kg). Under DC fields, metal concentrations elevated obviously with increasing voltages and the metal translocation factors were similar under all voltages. Metal extraction per plant achieved the maximum value under moderate voltage due to the greatest biomass production. DC field with high voltage (10V) decreased the volume of leachate from the chelator treatment without electric field from 1224 to 56mL, while the leachate gathered from AC field treatments raised from 512 to 670mL. DC field can retard the downward movement of metals caused by chelator application more effectively relative to AC field due to the constant water flow and electroosmosis direction. Alternating current field had more promotive effect on chelator assisted phytoremediation efficiency than DC field illustrated by more metal accumulation in the species. However, with the consideration of leaching risk, DC field with moderate voltage was the optimal supplementary technique for phytoremediation.

A multi-technique phytoremediation approach to purify metals contaminated soil from e-waste recycling site

Multiple techniques for soil decontamination were combined to enhance the phytoremediation efficiency of Eucalyptus globulese and alleviate the corresponding environmental risks. The approach constituted of chelating agent using, electrokinetic remediation, plant hormone foliar application and phytoremediation was designed to remediate multi-metal contaminated soils from a notorious e-waste recycling town. The decontamination ability of E. globulese increased from 1.35, 58.47 and 119.18 mg per plant for Cd, Pb and Cu in planting controls to 7.57, 198.68 and 174.34 mg per plant in individual EDTA treatments, respectively, but simultaneously, 0.9-11.5 times more metals leached from chelator treatments relative to controls. Low (2 V) and moderate (4 V) voltage electric fields provoked the growth of the species while high voltage (10 V) had an opposite effect and metal concentrations of the plants elevated with the increment of voltage. Volumes of the leachate decreased from 1224 to 134 mL with voltage increasing from 0 to 10 V due to electroosmosis and electrolysis. Comparing with individual phytoremediation, foliar cytokinin treatments produced 56% more biomass and intercepted 2.5 times more leachate attributed to the enhanced transpiration rate. The synergistic combination of the individuals resulted in the most biomass production and metal accumulation of the species under the stress condition relative to other methods. Time required for the multi-technique approach to decontaminate Cd, Pb and Cu from soil was 2.1-10.4 times less than individual chelator addition, electric field application or plant hormone utilization. It's especially important that nearly no leachate (60 mL in total) was collected from the multi-technique system. This approach is a suitable method to remediate metal polluted site considering its decontamination efficiency and associated environmental negligible risk.

The influence of e-waste recycling on the molecular ecological network of soil microbial communities in Pakistan and China

Primitive electronic waste (e-waste) recycling releases large amounts of organic pollutants and heavy metals into the environment. As crucial moderators of geochemical cycling processes and pollutant remediation, soil microbes may be affected by these contaminants. We collected soil samples heavily contaminated by e-waste recycling in China and Pakistan, and analyzed the indigenous microbial communities. The results of this work revealed that the microbial community composition and diversity, at both whole and core community levels, were affected significantly by polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and heavy metals (e.g., Cu, Zn, and Pb). The geographical distance showed limited impacts on microbial communities compared with geochemical factors. The constructed ecological network of soil microbial communities illustrated microbial co-occurrence, competition and antagonism across soils, revealing the response of microbes to soil properties and pollutants. Two of the three main modules constructed with core operational taxonomic units (OTUs) were sensitive to nutrition (total organic carbon and total nitrogen) and pollutants. Five key OTUs assigned to Acidobacteria, Proteobacteria, and Nitrospirae in ecological network were identified. This is the first study to report the effects of e-waste pollutants on soil microbial network, providing a deeper understanding of the ecological influence of crude e-waste recycling activities on soil ecological functions.

Physiology and bioprocess of single cell of Stenotrophomonas maltophilia in bioremediation of co-existed benzo[a]pyrene and copper

Polycyclic aromatic hydrocarbons (PAHs) and heavy metals are generally present in mixtures in the e-waste dismantling areas, posing serious health risk to the local people. Bioremediation has been considered as a promising approach for PAHs and heavy metals removal. In this study, we applied flow cytometry to obtain a better understanding of membrane potential (MP), apoptosis and cell cycle of Stenotrophomonas maltophilia affected by combined pollutants of benzo[a]pyrene(BaP) and Cu(II). The results showed that BaP was the main factor damaging the cell membrane and influencing the MP. S. maltophilia could even protect against upsetting situation by encouraging early apoptosis, whereby compromised cells committed suicide, as a result, which, in turn, facilitated the metabolism of the bacteria with high-vitality. Furthermore, even if the bacterial cell division was blocked and stopped reproduction, a large number of key enzymes inside cells could still be used for degradation of BaP. The expression of protein related to the transport and metabolism of BaP, regulation of redox reactions and phosphorylation in bacterial cell during bioprocess were evident different.

The assessment of source attribution of soil pollution in a typical e-waste recycling town and its surrounding regions using the combined organic and inorganic dataset

Guiyu is a well-known electronic waste dismantling and recycling town in south China. Concentrations and distribution of the 21 mineral elements and 16 polycyclic aromatic hydrocarbons (PAHs) collected there were evaluated. Principal component analyses (PCA) applied to the data matrix of PAHs in the soil extracted three major factors explaining 85.7% of the total variability identified as traffic emission, coal combustion, and an unidentified source. By using metallic or metalloid element concentrations as variables, five principal components (PCs) were identified and accounted for 70.4% of the information included in the initial data matrix, which can be denoted as e-waste dismantling-related contamination, two different geological origins, anthropogenic influenced source, and marine aerosols. Combining the 21 metallic and metalloid element datasets with the 16 PAH concentrations can narrow down the coarse source and decrease the unidentified contribution to soil in the present study and therefore effectively assists the source identification process.