Integrin and chemokine receptor gene expression in implant-adherent cells during early osseointegration

Multifaceted bone response to immunomodulatory magnesium implants: Osteopromotion at the interface and adipogenesis in the bone marrow

Orthopedic implants made of biodegradable magnesium (Mg) provide an alternative to nondegradable implants for fracture repair. Widely reported to be pro-osteogenic, Mg implants are also believed to be anti-inflammatory and anti-osteoclastic, but this is difficult to reconcile with the early clinical inflammation observed around these implants. Here, by surveying implant healing in a rat bone model, we determined the cellular responses and structural assembly of bone correlated with the surface changes of Mg implants inherent in degradation. We show that, compared to titanium, both high-purity (99.998 %) and clinical-grade, rare earth-alloyed (MgYREZr) Mg implants create an initial, transient proinflammatory environment that facilitates inducible nitric oxide synthase-mediated macrophage polarization, osteoclastogenesis, and neoangiogenesis programs. While this immunomodulation subsequently reinforces reparative osteogenesis at the surface of both Mg implants, the faster degradation of high-purity Mg implants, but not MgYREZr implants, elicits a compositional alteration in the interfacial bone and a previously unknown proadipogenic response with persistent low-grade inflammation in the surrounding bone marrow. Beyond the need for rigorous tailoring of Mg implants, these data highlight the need to closely monitor osseointegration not only at the immediate implant surface but also in the peri-implant bone and adjacent bone marrow.

Understanding exosomes: Part 2-Emerging leaders in regenerative medicine

Exosomes are the smallest subset of extracellular signaling vesicles secreted by most cells with the ability to communicate with other tissues and cell types over long distances. Their use in regenerative medicine has gained tremendous momentum recently due to their ability to be utilized as therapeutic options for a wide array of diseases/conditions. Over 5000 publications are currently being published yearly on this topic, and this number is only expected to dramatically increase as novel therapeutic strategies continue to be developed. Today exosomes have been applied in numerous contexts including neurodegenerative disorders (Alzheimer's disease, central nervous system, depression, multiple sclerosis, Parkinson's disease, post-traumatic stress disorders, traumatic brain injury, peripheral nerve injury), damaged organs (heart, kidney, liver, stroke, myocardial infarctions, myocardial infarctions, ovaries), degenerative processes (atherosclerosis, diabetes, hematology disorders, musculoskeletal degeneration, osteoradionecrosis, respiratory disease), infectious diseases (COVID-19, hepatitis), regenerative procedures (antiaging, bone regeneration, cartilage/joint regeneration, osteoarthritis, cutaneous wounds, dental regeneration, dermatology/skin regeneration, erectile dysfunction, hair regrowth, intervertebral disc repair, spinal cord injury, vascular regeneration), and cancer therapy (breast, colorectal, gastric cancer and osteosarcomas), immune function (allergy, autoimmune disorders, immune regulation, inflammatory diseases, lupus, rheumatoid arthritis). This scoping review is a first of its kind aimed at summarizing the extensive regenerative potential of exosomes over a broad range of diseases and disorders.

Effect of Er:YAG Pulsed Laser-Deposited Hydroxyapatite Film on Titanium Implants on M2 Macrophage Polarization In Vitro and Osteogenesis In Vivo

In a previous study, we successfully coated hydroxyapatite (HAp) onto titanium (Ti) plates using the erbium-doped yttrium aluminum garnet pulsed-laser deposition (Er:YAG-PLD) method. In this study, we performed further experiments to validate the in vitro osteogenic properties, macrophage polarization, and in vivo osseointegration activity of HAp-coated Ti (HAp-Ti) plates and screws. Briefly, we coated a HAp film onto the surfaces of Ti plates and screws via Er:YAG-PLD. The surface morphological, elemental, and crystallographic analyses confirmed the successful surface coating. The macrophage polarization and osteogenic induction were evaluated in macrophages and rat bone marrow mesenchymal stem cells, and the in vivo osteogenic properties were studied. The results showed that needle-shaped nano-HAp promoted the early expression of osteogenic and immunogenic genes in the macrophages and induced excellent M2 polarization properties. The calcium deposition and osteocalcin production were significantly higher in the HAp-Ti than in the uncoated Ti. The implantation into rat femurs revealed that the HAp-coated materials had superior osteoinductive and osseointegration activities compared with the Ti, as assessed by microcomputed tomography and histology. Thus, HAp film on sandblasted Ti plates and screws via Er:YAG-PLD enhances hard-tissue differentiation, macrophage polarization, and new bone formation in tissues surrounding implants both in vitro and in vivo.

Genome-wide transcriptional responses of osteoblasts to different titanium surface topographies

This is the first genome-wide transcriptional profiling study using RNA-sequencing to investigate osteoblast responses to different titanium surface topographies, specifically between machined, smooth and acid-etched, microrough surfaces. Rat femoral osteoblasts were cultured on machine-smooth and acid-etched microrough titanium disks. The culture system was validated through a series of assays confirming reduced osteoblast attachment, slower proliferation, and faster differentiation on microrough surfaces. RNA-sequencing analysis of osteoblasts at an early stage of culture revealed that gene expression was highly correlated (r = 0.975) between the two topographies, but 1.38 % genes were upregulated and 0.37 % were downregulated on microrough surfaces. Upregulated transcripts were enriched for immune system, plasma membrane, response to external stimulus, and positive regulation to stimulus processes. Structural mapping confirmed microrough surface-promoted gene sharing and networking in signaling pathways and immune system/responses. Target-specific pathway analysis revealed that Rho family G-protein signaling pathways and actin genes, responsible for the formation of stress fibers, cytoplasmic projections, and focal adhesion, were upregulated on microrough surfaces without upregulation of core genes triggered by cell-to-cell interactions. Furthermore, disulfide-linked or -targeted extracellular matrix (ECM) or membranous glycoproteins such as laminin, fibronectin, CD36, and thrombospondin were highly expressed on microrough surfaces. Finally, proliferating cell nuclear antigen (PCNA) and cyclin D1, whose co-expression reduces cell proliferation, were upregulated on microrough surfaces. Thus, osteoblasts on microrough surfaces were characterized by upregulation of genes related to a wide range of functions associated with the immune system, stress/stimulus responses, proliferation control, skeletal and cytoplasmic signaling, ECM-integrin receptor interactions, and ECM-membranous glycoprotein interactions, furthering our knowledge of the surface-dependent expression of osteoblastic biomarkers on titanium.

Leptin receptor gene deficiency minimally affects osseointegration in rats

Metabolic syndrome represents a cluster of conditions such as obesity, hyperglycaemia, dyslipidaemia, and hypertension that can lead to type 2 diabetes mellitus and/or cardiovascular disease. Here, we investigated the influence of obesity and hyperglycaemia on osseointegration using a novel, leptin receptor-deficient animal model, the Lund MetS rat. Machined titanium implants were installed in the tibias of animals with normal leptin receptor (LepR+/+) and those harbouring congenic leptin receptor deficiency (LepR-/-) and were left to heal for 28 days. Extensive evaluation of osseointegration was performed using removal torque measurements, X-ray micro-computed tomography, quantitative backscattered electron imaging, Raman spectroscopy, gene expression analysis, qualitative histology, and histomorphometry. Here, we found comparable osseointegration potential at 28 days following implant placement in LepR-/- and LepR+/+ rats. However, the low bone volume within the implant threads, higher bone-to-implant contact, and comparable biomechanical stability of the implants point towards changed bone formation and/or remodelling in LepR-/- rats. These findings are corroborated by differences in the carbonate-to-phosphate ratio of native bone measured using Raman spectroscopy. Observations of hypermineralised cartilage islands and increased mineralisation heterogeneity in native bone confirm the delayed skeletal development of LepR-/- rats. Gene expression analyses reveal comparable patterns between LepR-/- and LepR+/+ animals, suggesting that peri-implant bone has reached equilibrium in healing and/or remodelling between the animal groups.

Topography-mediated immunomodulation in osseointegration; Ally or Enemy

Osteoimmunology is at full display during endosseous implant osseointegration. Bone formation, maintenance and resorption at the implant surface is a result of bidirectional and dynamic reciprocal communication between the bone and immune cells that extends beyond the well-defined osteoblast-osteoclast signaling. Implant surface topography informs adherent progenitor and immune cell function and their cross-talk to modulate the process of bone accrual. Integrating titanium surface engineering with the principles of immunology is utilized to harness the power of immune system to improve osseointegration in healthy and diseased microenvironments. This review summarizes current information regarding immune cell-titanium implant surface interactions and places these events in the context of surface-mediated immunomodulation and bone regeneration. A mechanistic approach is directed in demonstrating the central role of osteoimmunology in the process of osseointegration and exploring how regulation of immune cell function at the implant-bone interface may be used in future control of clinical therapies. The process of peri-implant bone loss is also informed by immunomodulation at the implant surface. How surface topography is exploited to prevent osteoclastogenesis is considered herein with respect to peri-implant inflammation, osteoclastic precursor-surface interactions, and the upstream/downstream effects of surface topography on immune and progenitor cell function.

Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.

The effects of controlled nanotopography, machined topography and their combination on molecular activities, bone formation and biomechanical stability during osseointegration

The initial cellular and molecular activities at the bone interface of implants with controlled nanoscale topography and microscale roughness have previously been reported. However, the effects of such surface modifications on the development of osseointegration have not yet been determined. This study investigated the molecular events and the histological and biomechanical development of the bone interface in implants with nanoscale topography, microscale roughness or a combination of both. Polished and machined titanium implants with and without controlled nanopatterning (75 nm protrusions) were produced using colloidal lithography and coated with a thin titanium layer to unify the chemistry. The implants were inserted in rat tibiae and subjected to removal torque (RTQ) measurements, molecular analyses and histological analyses after 6, 21 and 28 days. The results showed that nanotopography superimposed on microrough, machined, surfaces promoted an early increase in RTQ and hence produced greater implant stability at 6 and 21 days. Two-way MANOVA revealed that the increased RTQ was influenced by microscale roughness and the combination of nanoscale and microscale topographies. Furthermore, increased bone-implant contact (BIC) was observed with the combined nanopatterned machined surface, although MANOVA results implied that the increased BIC was mainly dependent on microscale roughness. At the molecular level, the nanotopography, per se, and in synergy with microscale roughness, downregulated the expression of the proinflammatory cytokine tumor necrosis factor alpha (TNF-α). In conclusion, controlled nanotopography superimposed on microrough machined implants promoted implant stability during osseointegration. Nanoscale-driven mechanisms may involve attenuation of the inflammatory response at the titanium implant site. STATEMENT OF SIGNIFICANCE: The role of combined implant microscale and nanotopography features for osseointegration is incompletely understood. Using colloidal lithography technique, we created an ordered nanotopography pattern superimposed on screwshaped implants with microscale topography. The midterm and late molecular, bone-implant contact and removal torque responses were analysed in vivo. Nanotopography superimposed on microrough, machined, surfaces promoted the implant stability, influenced by microscale topography and the combination of nanoscale and microscale topographies. Increased bone-implant contact was mainly dependent on microscale roughness whereas the nanotopography, per se, and in synergy with microscale roughness, attenuated the proinflammatory tumor necrosis factor alpha (TNF-α) expression. It is concluded that microscale and nanopatterns provide individual as well as synergistic effects on molecular, morphological and biomechanical implant-tissue processes in vivo.

Cellular and Molecular Dynamics during Early Oral Osseointegration: A Comprehensive Characterization in the Lewis Rat

OBJECTIVE

There is a need to improve the predictability of osseointegration in implant dentistry. Current literature uses a variety of in vivo titanium (Ti) implantation models to investigate failure modes and test new materials and surfaces. However, these models produce a variety of results, making comparison across studies difficult. The purpose of this study is to validate an oral osseointegration in the Lewis rat to provide a reproducible baseline to track the inflammatory response and healing of Ti implants.

METHODS

Ti screws (0.76 mm Ø × 2 mm length) were implanted into the maxillary diastema of 52 adult male Lewis rats. Peri-implant tissues were evaluated 2, 7, 14, and 30 days after implantation (n = 13). Seven of the 13 samples underwent microtomographic analysis, histology, histomorphometry, and immunohistochemistry to track healing parameters. The remaining six samples underwent quantitative polymerase chain reaction (qPCR) to evaluate gene expression of inflammation and bone remodeling markers over time.

RESULTS

This model achieved a 78.5% success rate. Successful implants had a bone to implant contact (BIC)% of 68.86 ± 3.15 at 30 days on average. Histologically, healing was similar to other rodent models: hematoma and acute inflammation at 2 days, initial bone formation at 7, advanced bone formation and remodeling at 14, and bone maturation at 30. qPCR indicated the highest expression of bone remodeling and inflammatory markers 2-7 days, before slowly declining to nonsurgery control levels at 14-30 days.

CONCLUSION

This model combines cost-effectiveness and simplicity of a rodent model, while maximizing BIC, making it an excellent candidate for evaluation of new surfaces.

Mesenchymal stem cell-derived small extracellular vesicles and bone regeneration

Mesenchymal stem cells (MSCs) and MSC‐derived small extracellular vesicles (sEVs) are promising candidates for cell‐based and cell‐free regenerative medicine, respectively. By virtue of their multiple lineage differentiation capacity, MSCs have been implicated as an ideal tool for bone and cartilage regeneration. However, later observations attributed such regenerative effects to MSC‐secreted paracrine factors. Exosomes, endosomal originated sEVs carrying lipid, protein and nucleic acid cargoes, were identified as components of the MSC secretome and propagated the key regenerative and immunoregulatory characteristics of parental MSCs. Here, exosome biogenesis, the molecular composition of exosomes, sEV‐cell interactions and the effects on key bone homeostasis cells are reviewed. MSC‐derived sEVs show to promote neovascularization and bone and cartilage regeneration in preclinical disease models. The mechanisms include the transfer of molecules, including microRNAs, mRNAs and proteins, to other key cells. MSC‐derived sEVs are interesting candidates as biopharmaceuticals for drug delivery and for the engineering of biologically functionalized materials. Although major exploratory efforts have been made for therapeutic development, the secretion, distribution and biological effects of MSC‐derived sEVs in bone and cartilage regeneration are not fully understood. Moreover, techniques for high‐yield production, purity and storage need to be optimized before effective and safe MSC‐derived sEVs therapies are realized.

Approaches to promoting bone marrow mesenchymal stem cell osteogenesis on orthopedic implant surface

Bone marrow-derived mesenchymal stem cells (BMSCs) play a critical role in the osseointegration of bone and orthopedic implant. However, osseointegration between the Ti-based implants and the surrounding bone tissue must be improved due to titanium’s inherent defects. Surface modification stands out as a versatile technique to create instructive biomaterials that can actively direct stem cell fate. Here, we summarize the current approaches to promoting BMSC osteogenesis on the surface of titanium and its alloys. We will highlight the utilization of the unique properties of titanium and its alloys in promoting tissue regeneration, and discuss recent advances in understanding their role in regenerative medicine. We aim to provide a systematic and comprehensive review of approaches to promoting BMSC osteogenesis on the orthopedic implant surface.

Albumin-impregnated bone granules modulate the interactions between mesenchymal stem cells and monocytes under in vitro inflammatory conditions

Bone regeneration around newly implanted biomaterials is a complex process, which in its early phases involves the interactions between Mesenchymal Stem Cells (MSCs) and immune cells. The response of these cells to the biomaterial depends both on the local microenvironment and on the characteristics of the inserted bone substitute. In this work, bone allografts impregnated with albumin are loaded with a co-culture of human MSCs and monocytes; bone granules without albumin are used for comparison. Co-cultures are contextually treated with pro-inflammatory cytokines to simulate the inflammatory milieu naturally present during the bone regeneration process. As revealed by microscopic images, albumin-impregnated bone granules promote adhesion and interactions between cells populations. Compared to control granules, albumin coating diminishes reactive species production by cells. This reduced oxidative stress may be attributable to antioxidant properties of albumin, and it is also reflected in the mitigated gene expression of mitochondrial electron transport chain complexes, where most intracellular reactive molecules are generated. MSCs-monocytes co-cultured onto albumin-impregnated bone granules additionally release higher amounts of immunomodulatory cytokines and growth factors. In summary, this work demonstrates that impregnation of bone granules with albumin positively modulates the interactions between MSCs and immune cells, consequently influencing their mutual activities and immunomodulatory functions.

Exosomes influence the behavior of human mesenchymal stem cells on titanium surfaces

Mesenchymal stem cells (MSCs) have important roles during osseointegration. This study determined (i) if MSC-derived extracellular vesicles (EVs)/exosomes can be immobilized on titanium (Ti) surfaces and influence the behavior of MSCs, (ii) if the response is differentially affected by EVs from expanded vs differentiated MSCs and (iii) if the EV protein cargos predict the functional features of the exosomes. EVs secreted by human adipose-derived MSCs were isolated by ultracentrifugation and analyzed using nanoparticle tracking analysis, Western blotting and relative quantitative mass spectrometry. Fluorescence microscopy, scanning electron microscopy, cell counting assay and quantitative polymerase chain reaction were used to analyze MSC adhesion, proliferation and differentiation. Exosome immobilization on Ti promoted MSC adhesion and spreading after 24 h and proliferation after 3 and 6 days, irrespective of whether the exosomes were obtained from expansion or differentiation conditions. Immobilized exosomes upregulated stromal cell-derived factor (SDF-1α) gene expression. Cell adhesion molecules and signaling molecules were abundant in the exosomal proteome. The predicted functions of the equally-abundant proteins in both exosome types were in line with the observed biological effects mediated by the exosomes. Thus, exosomes derived from MSCs and immobilized on Ti surfaces interact with MSCs and rapidly promote MSC adhesion and proliferation. These findings provide a novel route for modification of titanium implant surfaces.

Biomechanical behaviours of the bone-implant interface: a review

In recent decades, cementless implants have been widely used in clinical practice to replace missing organs, to replace damaged or missing bone tissue or to restore joint functionality. However, there remain risks of failure which may have dramatic consequences. The success of an implant depends on its stability, which is determined by the biomechanical properties of the bone-implant interface (BII). The aim of this review article is to provide more insight on the current state of the art concerning the evolution of the biomechanical properties of the BII as a function of the implant's environment. The main characteristics of the BII and the determinants of implant stability are first introduced. Then, the different mechanical methods that have been employed to derive the macroscopic properties of the BII will be described. The experimental multi-modality approaches used to determine the microscopic biomechanical properties of periprosthetic newly formed bone tissue are also reviewed. Eventually, the influence of the implant's properties, in terms of both surface properties and biomaterials, is investigated. A better understanding of the phenomena occurring at the BII will lead to (i) medical devices that help surgeons to determine an implant's stability and (ii) an improvement in the quality of implants.

Randomized controlled clinical trial on calcium phosphate coated and conventional SLA surface implants: 1-year study on survival rate and marginal bone level

BACKGROUND

Calcium phosphate (CaP)-coated surface showed enhanced contact osteogenesis around dental implant and finally accelerate osseointegration in early healing phase.

PURPOSE

The aim of this randomized controlled trial was to compare the peri-implant marginal bone level around uncoated and CaP-coated sandblasted, large-grit, acid-etched (SLA) surface implants during the first year after placement.

MATERIALS AND METHODS

This study was performed upon 34 patients with randomized and double-blinded design. Clinical and radiographic examinations were performed immediately after implant placement, at re-entry after 3 months, and after 12 months to evaluate the initial stability and change in the marginal bone level. The distance from the implant shoulder to the top of the bone-to-implant contact was defined as the marginal bone level, and its alteration was measured at 1 year after implant installation.

RESULTS

None of the implants failed, and most of them showed a marginal bone loss of less than 1 mm. Small changes in the bone level were noted at all sites in the control and test groups, and there were no clinically significant differences in the changes in the marginal bone.

CONCLUSION

Both CaP-coated and uncoated SLA surface implants showed comparably successful marginal bone stability without any complications during the first year after placement.

Nanostructural Surfaces with Different Elastic Moduli Regulate the Immune Response by Stretching Macrophages

A proper immune response is key for the successful implantation of biomaterials, and designing and fabricating biomaterials to regulate immune responses is the future trend. In this work, three different nanostructures were constructed on the surface of titanium using a hydrothermal method, and through a series of in vitro and in vivo experiments, we found that the aspect ratio of nanostructures can affect the elastic modulus of a material surface and further regulate immune cell behaviors. This work demonstrates that nanostructures with a higher aspect ratio can endow a material surface with a lower elastic modulus, which was confirmed by experiments and theoretical analyses. The deflection of nanostructures under the cell adsorption force is a substantial factor in stretching macrophages to enhance cell adhesion and spreading, further inducing macrophage polarization toward the M1 phenotype and leading to intense immune responses. In contrast, a nanostructure with a lower aspect ratio on a material surface leads to a higher surface elastic modulus, making deflection of the material difficult and creating a surface that is not conducive to macrophage adhesion and spreading, thus reducing the immune response. Moreover, molecular biology experiments indicated that regulation of the immune response by the elastic modulus is primarily related to the NF-κB signaling pathway. These findings suggest that the immune response can be regulated by constructing nanostructural surfaces with the proper elastic modulus through their influence on cell adhesion and spreading, which provides new insights into the surface design of biomaterials.

Three-dimensional modeling of removal torque and fracture progression around implants

In the present study, a model for simulations of removal torque experiments was developed using finite element method. The interfacial retention and fracturing of the surrounding material caused by the surface features during torque was analyzed. It was hypothesized that the progression of removal torque and the phases identified in the torque response plot represents sequential fractures at the interface. The 3-dimensional finite element model fairly accurately predicts the torque required to break the fixation of acid-etched implants, and also provides insight to how sequential fractures progress downwards along the implant side.

Effect of Multilaminate Small Intestinal Submucosa as a Barrier Membrane on Bone Formation in a Rabbit Mandible Defect Model

A barrier membrane (BM) is essential for guided bone regeneration (GBR) procedures. Absorbable BMs based on collagen have been widely applied clinically due to their excellent biocompatibility. The extracellular matrix (ECM) provides certain advantages that can compensate for the rapid degradation and insufficient mechanical strength of pure collagen membrane due to the porous scaffold structure. Recently, small intestinal submucosa (SIS), one of the most widely used ECM materials, has drawn much attention in bone tissue engineering. In this study, we adopted multilaminate SIS (mSIS) as a BM and evaluated its in vivo and in vitro properties. mSIS exhibited a multilaminate structure with a smooth upper surface and a significantly coarser bottom layer according to microscopic observation. Tensile strength was 13.10 ± 2.56 MPa. In in vivo experiments, we selected a rabbit mandibular defect model and subcutaneous implantation to compare osteogenesis and biodegradation properties with one of the most commonly used commercial collagen membranes. mSIS was retained for up to 3 months and demonstrated longer biodegradation time than commercial collagen membrane. Quantification of bone regeneration revealed significant differences in each group. Micro-computed tomography (micro-CT) revealed that the quantity and maturity of bones in the mSIS group were significantly higher than those in the blank control group (P < 0.05) and were similar to those in a commercial collagen membrane group (P > 0.05) at 4 and 12 weeks after surgery. Hematoxylin and eosin staining revealed large amounts of mature lamellar bone at 12 weeks in mSIS and commercial collagen membrane groups. Therefore, we conclude that mSIS has potential as a future biocompatible BM in GBR procedures.

Effects of implant-delivered insulin on bone formation in osteoporotic rats

Osteoporosis is a major cause of age-related fractures. Healing complications in osteoporotic patients are often associated with increased mortality and morbidity. Stimulation of the implant-adjacent bone could be beneficial in terms of the surgical outcome. Over the past decade, numerous investigations have implicated insulin in normal bone growth, and recent studies have described the advantages of administering insulin locally to increase bone formation. Therefore, we hypothesized that insulin-coated titanium implants would increase bone formation in osteoporotic animals. The aim of this study was to evaluate the effects of insulin delivered from an implant surface on bone-related gene expression and bone formation in osteoporotic rats. Characterizations of the surfaces of insulin-coated and control implants were performed using ellipsometry and interferometry. Forty ovariectomized and four healthy Sprague Dawley rats were used and implants were inserted in the tibias. The systemic effect of insulin was assessed by measuring the blood glucose levels and total body weight. The animals were sacrificed either 1 day or 3 weeks postimplantation. Implant-adherent cells were analyzed by quantitative real-time PCR, and the bone adjacent to the implants was examined by microcomputed tomography and histomorphometry. The insulin-coated implants had no systemic effects. The insulin-coated samples demonstrated significantly lower expression of the gene for interleukin 1β (p = 0.019) at 1 day, and significantly exhibited more periosteal callus (p = 0.029) at 3 weeks. Locally delivered insulin has potential for promoting bone formation and it exerts potentially anti-inflammatory effects in osteoporotic rats. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2472-2480, 2018.

A multiscale analytical approach to evaluate osseointegration

Osseointegrated implants are frequently used in reconstructive surgery, both in the dental and orthopedic field, restoring physical function and improving the quality of life for the patients. The bone anchorage is typically evaluated at micrometer resolution, while bone tissue is a dynamic composite material composed of nanoscale collagen fibrils and apatite crystals, with defined hierarchical levels at different length scales. In order to understand the bone formation and the ultrastructure of the interfacial tissue, analytical strategies needs to be implemented enabling multiscale and multimodal analyses of the intact interface. This paper describes a sample preparation route for successive analyses allowing assessment of the different hierarchical levels of interest, going from macro to nano scale and could be implemented on single samples. Examples of resulting analyses of different techniques on one type of implant surface is given, with emphasis on correlating the length scale between the different techniques. The bone-implant interface shows an intimate contact between mineralized collagen bundles and the outermost surface of the oxide layer, while bone mineral is found in the nanoscale surface features creating a functionally graded interface. Osteocytes exhibit a direct contact with the implant surface via canaliculi that house their dendritic processes. Blood vessels are frequently found in close proximity to the implant surface either within the mineralized bone matrix or at regions of remodeling.

Bone mesenchymal stem cell secretion of sRANKL/OPG/M-CSF in response to macrophage-mediated inflammatory response influences osteogenesis on nanostructured Ti surfaces

Although it has been well established that osteogenic differentiation of bone mesenchymal stem cells (bMSCs) as well as osteoclastic differentiation of macrophages can be manipulated by the nanostructure of biomaterial surfaces, the interactions among the effects of the surface on immune cells and bMSCs remained unknown. Therefore, in this study, the osteogenic behaviors and secretion of osteoclastogenesis-related cytokines of human bMSCs on TiO₂ nanotubular (NT) surfaces in conditioned medium (CM) generated by macrophages cultured on the respective NT surfaces (NT-CM) were analyzed. Although bMSCs showed consistent osteogenic behaviors on the NT5 and NT20 surfaces in both standard culture medium and both types of NT-CM, collagen synthesis and extracellular matrix mineralization were partially impeded on the NT20 surface in NT20-CM and bMSC cytokine secretions on the NT20 surface in NT20-CM elicited remarkable multinuclear giant cell and osteoclast formation compared with that observed on the NT5 surface in NT5-CM. After implantation in vivo, mineralized bone formation was significantly delayed around the NT20 implant compared with the NT5 implant, but both surfaces contributed to good bone formation after 12 weeks. The results obtained in this study advance our understanding of the confounding influence of the implant surface nanostructure, macrophage inflammatory response, and osteogenic differentiation of bMSCs as well as the retro-regulative effects of bMSCs on the osteoclastic differentiation of macrophages, and the culture system based on different NT surfaces and CM generated on the respective surfaces may provide a systematic research model for evaluating the performance of endosseous implants as well as a prospective approach for improving implant osseointegration via immune-regulation.

The Role of the Chemokine System in Tissue Response to Prosthetic By-products Leading to Periprosthetic Osteolysis and Aseptic Loosening

Millions of total joint replacements are performed annually worldwide, and the number is increasing every year. The overall proportion of patients achieving a successful outcome is about 80–90% in a 10–20-years time horizon postoperatively, periprosthetic osteolysis (PPOL) and aseptic loosening (AL) being the most frequent reasons for knee and hip implant failure and reoperations. The chemokine system (chemokine receptors and chemokines) is crucially involved in the inflammatory and osteolytic processes leading to PPOL/AL. Thus, the modulation of the interactions within the chemokine system may influence the extent of PPOL. Indeed, recent studies in murine models reported that (i) blocking the CCR2–CCL2 or CXCR2–CXCL2 axis or (ii) activation of the CXCR4–CXCL12 axis attenuate the osteolysis of artificial joints. Importantly, chemokines, inhibitory mutant chemokines, antagonists of chemokine receptors, or neutralizing antibodies to the chemokine system attached to or incorporated into the implant surface may influence the tissue responses and mitigate PPOL, thus increasing prosthesis longevity. This review summarizes the current state of the art of the knowledge of the chemokine system in human PPOL/AL. Furthermore, the potential for attenuating cell trafficking to the bone–implant interface and influencing tissue responses through modulation of the chemokine system is delineated. Additionally, the prospects of using immunoregenerative biomaterials (including chemokines) for the prevention of failed implants are discussed. Finally, this review highlights the need for a more sophisticated understanding of implant debris-induced changes in the chemokine system to mitigate this response effectively.

Clinical, radiological, and gene expression analyses in smokers and non-smokers, Part 2: RCT on the late healing phase of osseointegration

BACKGROUND

The mechanisms behind the impact of smoking on osseointegration are not fully understood.

PURPOSE

To investigate the initial clinical and molecular course of osseointegration of different implants in smokers and non-smokers in a randomized controlled trial (RCT).

MATERIALS AND METHODS

Smoking (n = 16) and non-smoking (n = 16) patients received 3 implant types: machined, oxidized, and laser-modified surfaces. Baseline bone biopsies were retrieved from the implant sites. After 60 and 90 days, the pain score, implant stability quotient (ISQ), and peri-implant crevicular fluid (PICF) gene expression were analyzed. Furthermore, radiological and clinical assessments were made at 90 days.

RESULTS

At 90 days, no pain was reported, irrespective of smoking habit. A higher ISQ was found in smokers compared with non-smokers. Marginal bone loss (MBL) was greater in smokers than in non-smokers. The comparison of implant surfaces revealed greater MBL exclusively at the machined implants in smokers. At 90 days in smokers, the PICF around machined implants revealed a higher expression of the proinflammatory cytokine, interleukin-6 (IL-6), and a lower expression of the osteogenic gene, osteocalcin (OC), compared with the PICF around modified implants. Furthermore, OC expression was lower at machined implants in smokers compared with machined implants in non-smokers. After adjustment for age and implant location (maxilla/mandible), multivariate regression revealed the following predictors of MBL: smoking, bleeding on probing at 90 days, hypoxia-inducible factor 1 alpha (HIF-1α) expression at baseline and IL-6 expression in PICF at 90 days.

CONCLUSIONS

During the early phase of osseointegration, non-smokers and smokers present a similar, high implant survival. In contrast, smokers present a greater MBL, particularly at machined implants. HIF-1α baseline expression in the recipient bone and IL-6 expression in PICF cells are important molecular determinants for MBL after 90 days. It is concluded that smoking has an early effect on osseointegration, which is dependent on the implant surface properties and the local host response.

Gene expression in peri-implant crevicular fluid of smokers and nonsmokers. 1. The early phase of osseointegration

BACKGROUND

Smoking is a risk factor for dental implants. The mechanisms behind the impact of smoking on osseointegration are not fully understood.

PURPOSE

To investigate the initial molecular and clinical course of osseointegration of different titanium implants in smokers and nonsmokers.

MATERIALS AND METHODS

Smoker (n = 16) and nonsmoker (n = 16) patients were included. Each patient received three implant types: machined, oxidized and laser-modified surfaces. After 1, 7, 14, and 28 days, the peri-implant crevicular fluid (PICF) was sampled for gene expression analysis of selected factors involved in early processes of osseointegration. Furthermore, pain-score (VAS), resonance frequency analysis (RFA) and baseline clinical assessments were performed.

RESULTS

Early failure of osseointegration, associated with a high and sustained perception of pain, was encountered in 3/32 patients. In general, high pain scores were reported during the first days after implantation, irrespective to smoking habit, which correlated to high levels of pro-inflammatory cytokines during the first days after implantation. Higher ISQ values were found in smokers compared to nonsmokers. In smokers exclusively, ISQ values correlated to harder and less atrophic bone quality and quantity, respectively. Smokers displayed a higher expression of osteocalcin (OC), but later peak and lower expression of bone morphogenetic protein (BMP-2) (at 7 days) compared to nonsmokers. In comparison to machined implants, surface-modified implants were associated with higher expression of alkaline phosphatase (ALP) and cathepsin K (CatK) at 28 days in nonsmokers.

CONCLUSIONS

During the early phase of osseointegration, postoperative pain is linked to the inflammatory cell response and, may tentatively serve as an indicator of biological complication and implant loss. The present study suggests that smokers have an altered bone composition and (ultra)structure based on the observations that ISQ values are higher and correlate to recipient bone quality and quantity in smokers.

The influence of controlled surface nanotopography on the early biological events of osseointegration

The early cell and tissue interactions with nanopatterned titanium implants are insufficiently described in vivo. A limitation has been to transfer a pre-determined, well-controlled nanotopography to 3D titanium implants, without affecting other surface parameters, including surface microtopography and chemistry. This in vivo study aimed to investigate the early cellular and molecular events at the bone interface with screw-shaped titanium implants superimposed with controlled nanotopography. Polished and machined titanium implants were firstly patterned with 75-nm semispherical protrusions. Polished and machined implants without nano-patterns were designated as controls. Thereafter, all nanopatterned and control implants were sputter-coated with a 30nm titanium layer to unify the surface chemistry. The implants were inserted in rat tibiae and samples were harvested after 12h, 1d and 3d. In one group, the implants were unscrewed and the implant-adherent cells were analyzed using quantitative polymerase chain reaction. In another group, implants with surrounding bone were harvested en bloc for histology and immunohistochemistry. The results showed that nanotopography downregulated the expression of monocyte chemoattractant protein-1 (MCP-1), at 1d, and triggered the expression of osteocalcin (OC) at 3d. This was in parallel with a relatively lower number of recruited CD68-positive macrophages in the tissue surrounding the nanopatterned implants. Moreover, a higher proportion of newly formed osteoid and woven bone was found at the nanopatterned implants at 3d. It is concluded that nanotopography, per se, attenuates the inflammatory process and enhances the osteogenic response during the early phase of osseointegration. This nanotopography-induced effect appeared to be independent of the underlying microscale topography.

STATEMENT OF SIGNIFICANCE

This study provides a first line of evidence that pre-determined nanopatterns on clinically relevant, screw-shaped, titanium implants can be recognized by cells in the complex in vivo environment. Until now, most of the knowledge relating to cell interactions with nanopatterned surfaces has been acquired from in vitro studies involving mostly two-dimensional nanopatterned surfaces of varying chemical composition. We have managed to superimpose pre-determined nanoscale topography on polished and micro-rough, screw-shaped, implants, without changes in the microscale topography or chemistry. This was achieved by colloidal lithography in combination with a thin titanium film coating on top of both nanopatterned and control implants. The early events of osseointegration were evaluated at the bone interface to these implants. The results revealed that nanotopography, as such, elicits downregulatory effects on the early recruitment and activity of inflammatory cells while enhancing osteogenic activity and woven bone formation.

The bone-implant interface of dental implants in humans on the atomic scale

Osseointegration of dental implants occurs on a hierarchy of length scales down to the atomic level. A deeper understanding of the complex processes that take place at the surface of an implant on the smallest scale is of interest for the development of improved biomaterials. To date, transmission electron microscopy (TEM) has been utilized for examination of the bone-implant interface, providing details on the nanometer level. In this study we show that TEM imaging can be complemented with atom probe tomography (APT) to reveal the chemical composition of a Ti-based dental implant in a human jaw on the atomic level of resolution. As the atom probe technique has equal sensitivity for all elements, it allows for 3 dimensional characterizations of osseointegrated interfaces with unprecedented resolution. The APT reconstructions reveal a Ca-enriched zone in the immediate vicinity of the implant surface. A surface oxide of some 5nm thickness was measured on the titanium implant, with a sub-stoichiometric composition with respect to TiO₂. Minor incorporation of Ca into the thin oxide film was also evident. We conclude that the APT technique is capable of revealing chemical information from the bone-implant interface in 3D with unprecedented resolution, thus providing important insights into the mechanisms behind osseointegration.

STATEMENT OF SIGNIFICANCE

Osseointegration of dental implants occurs on a hierarchy of length scales down to the atomic level. A deeper understanding of the complex processes that take place at the surface of an implant on the smallest scale is of interest for the development of improved biomaterials. To date, transmission electron microscopy (TEM) has been utilized for examination of the bone-implant interface, providing details on the nanometer level. In this study we show that TEM imaging can be complemented with atom probe tomography (APT) to reveal the chemical composition of a Ti-based dental implant in a human jaw on the atomic level of resolution. Correlative microscopy ensures the accuracy of APT reconstructions and helps provide both chemical and structural information of the bone-implant interface on the smallest of length scales.

Environmental Factors Impacting Bone-Relevant Chemokines

Chemokines play an important role in normal bone physiology and the pathophysiology of many bone diseases. The recent increased focus on the individual roles of this class of proteins in the context of bone has shown that members of the two major chemokine subfamilies-CC and CXC-support or promote the formation of new bone and the remodeling of existing bone in response to a myriad of stimuli. These chemotactic molecules are crucial in orchestrating appropriate cellular homing, osteoblastogenesis, and osteoclastogenesis during normal bone repair. Bone healing is a complex cascade of carefully regulated processes, including inflammation, progenitor cell recruitment, differentiation, and remodeling. The extensive role of chemokines in these processes and the known links between environmental contaminants and chemokine expression/activity leaves ample opportunity for disruption of bone healing by environmental factors. However, despite increased clinical awareness, the potential impact of many of these environmental factors on bone-related chemokines is still ill defined. A great deal of focus has been placed on environmental exposure to various endocrine disruptors (bisphenol A, phthalate esters, etc.), volatile organic compounds, dioxins, and heavy metals, though mainly in other tissues. Awareness of the impact of other less well-studied bone toxicants, such as fluoride, mold and fungal toxins, asbestos, and chlorine, is also reviewed. In many cases, the literature on these toxins in osteogenic models is lacking. However, research focused on their effects in other tissues and cell lines provides clues for where future resources could be best utilized. This review aims to serve as a current and exhaustive resource detailing the known links between several classes of high-interest environmental pollutants and their interaction with the chemokines relevant to bone healing.

Inflammatory cell response to ultra-thin amorphous and crystalline hydroxyapatite surfaces

It has been suggested that surface modification with a thin hydroxyapatite (HA) coating enhances the osseointegration of titanium implants. However, there is insufficient information about the biological processes involved in the HA-induced response. This study aimed to investigate the inflammatory cell response to titanium implants with either amorphous or crystalline thin HA. Human mononuclear cells were cultured on titanium discs with a machined surface or with a thin, 0.1 μm, amorphous or crystalline HA coating. Cells were cultured for 24 and 96 h, with and without lipopolysaccharide (LPS) stimulation. The surfaces were characterized with respect to chemistry, phase composition, wettability and topography. Biological analyses included the percentage of implant-adherent cells and the secretion of pro-inflammatory cytokine (TNF-α) and growth factors (BMP-2 and TGF-β1). Crystalline HA revealed a smooth surface, whereas the amorphous HA displayed a porous structure, at nano-scale, and a hydrophobic surface. Higher TNF-α secretion and a higher ratio of adherent cells were demonstrated for the amorphous HA compared with the crystalline HA. TGF-β1 secretion was detected in all groups, but without any difference. No BMP-2 secretion was detected in any of the groups. The addition of LPS resulted in a significant increase in TNF-α in all groups, whereas TGF-β1 was not affected. Taken together, the results show that thin HA coatings with similar micro-roughness but a different phase composition, nano-scale roughness and wettability are associated with different monocyte responses. In the absence of strong inflammatory stimuli, crystalline hydroxyapatite elicits a lower inflammatory response compared with amorphous hydroxyapatite.

Effects of a Low-Intensity Laser on Dental Implant Osseointegration: Removal Torque and Resonance Frequency Analysis in Rabbits

The objective of this study was to investigate how a low-intensity laser affects the stability and reverse torque resistance of dental implants installed in the tibia of rabbits. Thirty rabbits received 60 dental implants with the same design and surface treatment, one in each proximal metaphysis of the tibia. Three groups were prepared (n = 10 animals each): conventional osseointegration without treatment (control group), surgical sites irradiated with a laser beam emitted in the visible range of 680 nm (Lg1 group), surgical sites irradiated with a laser beam with a wavelength in the infrared range of 830 nm (Lg2 group). Ten irradiation sessions were performed 48 hours apart; the first session was during the immediate postoperative period. Irradiation energy density was 4 J/cm2 per point in 2 points on each side of the tibias. The resonance frequency and removal torque values were measured at 2 time points after the implantations (3 and 6 weeks). Both laser groups (Lg1 and Lg2) presented a significant difference between resonance frequency analysis values at the baseline and the values obtained after 3 and 6 weeks (P &gt; .05). Although the removal torque values of all groups increased after 6 weeks (P &lt; .05), both laser groups presented greater mean values than those of the control group (P &lt; .01). Photobiomodulation using laser irradiation with wavelengths of 680 and 830 nm had a better degree of bone integration than the control group after 6 weeks of observation time.

Novel grooved substrata stimulate macrophage fusion, CCL2 and MMP-9 secretion

Rough surface topographies on implants attract macrophages but the influence of topography on macrophage fusion to produce multinucleated giant cells (MGC) and foreign body giant cells (FBGC) is unclear. Two rough novel grooved substrata, G1 and G2, fabricated by anisotropic etching of Silicon <110> crystals without the use of photolithographic patterning, and a control smooth surface (Pol) were produced and replicated in epoxy. The surfaces were compared for their effects on RAW264.7 macrophage morphology, gene expression, cyto/chemokine secretion, and fusion for one and five days. Macrophages on grooved surfaces exhibited an elongated morphology similar to M2 macrophages and increased cell alignment with surface directionality, roughness and cell culture time. Up-regulated expression of macrophage chemoattractants at gene and protein level was observed on both grooved surfaces relative to Pol. Grooved surfaces showed time-dependent increase in soluble mediators involved in cell fusion, CCL2 and MMP-9, and an increased proportion of multinucleated cells at Day 5. Collectively, this study demonstrated that a rough surface with surface directionality produced changes in macrophage shape and macrophage attractant chemokines and soluble mediators involved in cell fusion. These in vitro results suggest a possible explanation for the observed accumulation of macrophages and MGCs on rough surfaced implants in vivo. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2243-2254, 2016.

Radiolabeled cyclic RGD peptides as radiotracers for tumor imaging

The integrin family comprises 24 transmembrane receptors, each a heterodimeric combination of one of 18α and one of 8β subunits. Their main function is to integrate the cell adhesion and interaction with the extracellular microenvironment with the intracellular signaling and cytoskeletal rearrangement through transmitting signals across the cell membrane upon ligand binding. Integrin α_vβ₃ is a receptor for the extracellular matrix proteins containing arginine–glycine–aspartic (RGD) tripeptide sequence. The α_vβ₃ is generally expressed in low levels on the epithelial cells and mature endothelial cells, but it is highly expressed in many solid tumors. The α_vβ₃ levels correlate well with the potential for tumor metastasis and aggressiveness, which make it an important biological target for development of antiangiogenic drugs, and molecular imaging probes for early tumor diagnosis. Over the last decade, many radiolabeled cyclic RGD peptides have been evaluated as radiotracers for imaging tumors by SPECT or PET. Even though they are called “α_vβ₃-targeted” radiotracers, the radiolabeled cyclic RGD peptides are also able to bind α_vβ₅, α₅β₁, α₆β₄, α₄β₁, and α_vβ₆ integrins, which may help enhance their tumor uptake due to the “increased receptor population.” This article will use the multimeric cyclic RGD peptides as examples to illustrate basic principles for development of integrin-targeted radiotracers and focus on different approaches to maximize their tumor uptake and T/B ratios. It will also discuss important assays for pre-clinical evaluations of the integrin-targeted radiotracers, and their potential applications as molecular imaging tools for noninvasive monitoring of tumor metastasis and early detection of the tumor response to antiangiogenic therapy.

The role of well-defined nanotopography of titanium implants on osseointegration: cellular and molecular events in vivo

Purpose

Mechanisms governing the cellular interactions with well-defined nanotopography are not well described in vivo. This is partly due to the difficulty in isolating a particular effect of nanotopography from other surface properties. This study employed colloidal lithography for nanofabrication on titanium implants in combination with an in vivo sampling procedure and different analytical techniques. The aim was to elucidate the effect of well-defined nanotopography on the molecular, cellular, and structural events of osseointegration.

Materials and methods

Titanium implants were nanopatterned (Nano) with semispherical protrusions using colloidal lithography. Implants, with and without nanotopography, were implanted in rat tibia and retrieved after 3, 6, and 28 days. Retrieved implants were evaluated using quantitative polymerase chain reaction, histology, immunohistochemistry, and energy dispersive X-ray spectroscopy (EDS).

Results

Surface characterization showed that the nanotopography was well defined in terms of shape (semispherical), size (79±6 nm), and distribution (31±2 particles/µm²). EDS showed similar levels of titanium, oxygen, and carbon for test and control implants, confirming similar chemistry. The molecular analysis of the retrieved implants revealed that the expression levels of the inflammatory cytokine, TNF-α, and the osteoclastic marker, CatK, were reduced in cells adherent to the Nano implants. This was consistent with the observation of less CD163-positive macrophages in the tissue surrounding the Nano implant. Furthermore, periostin immunostaining was frequently detected around the Nano implant, indicating higher osteogenic activity. This was supported by the EDS analysis of the retrieved implants showing higher content of calcium and phosphate on the Nano implants.

Conclusion

The results show that Nano implants elicit less periimplant macrophage infiltration and downregulate the early expression of inflammatory (TNF-α) and osteoclastic (CatK) genes. Immunostaining and elemental analyses show higher osteogenic activity at the Nano implant. It is concluded that an implant with the present range of well-defined nanocues attenuates the inflammatory response while enhancing mineralization during osseointegration.

Radiolabeled Cyclic RGD Peptide Bioconjugates as Radiotracers Targeting Multiple Integrins

Angiogenesis is a requirement for tumor growth and metastasis. The angiogenic process depends on vascular endothelial cell migration and invasion, and is regulated by various cell adhesion receptors. Integrins are such a family of receptors that facilitate the cellular adhesion to and migration on extracellular matrix proteins in the intercellular spaces and basement membranes. Among 24 members of the integrin family, αvβ3 is studied most extensively for its role in tumor angiogenesis and metastasis. The αvβ3 is expressed at relatively low levels on epithelial cells and mature endothelial cells, but it is highly expressed on the activated endothelial cells of tumor neovasculature and some tumor cells. This restricted expression makes αvβ3 an excellent target to develop antiangiogenic drugs and diagnostic molecular imaging probes. Since αvβ3 is a receptor for extracellular matrix proteins with one or more RGD tripeptide sequence, many radiolabeled cyclic RGD peptides have been evaluated as "αvβ3-targeted" radiotracers for tumor imaging over the past decade. This article will use the dimeric and tetrameric cyclic RGD peptides developed in our laboratories as examples to illustrate basic principles for development of αvβ3-targeted radiotracers. It will focus on different approaches to maximize the radiotracer tumor uptake and tumor/background ratios. This article will also discuss some important assays for preclinical evaluations of integrin-targeted radiotracers. In general, multimerization of cyclic RGD peptides increases their integrin binding affinity and the tumor uptake and retention times of their radiotracers. Regardless of their multiplicity, the capability of cyclic RGD peptides to bind other integrins (namely, αvβ5, α5β1, α6β4, α4β1, and αvβ6) is expected to enhance the radiotracer tumor uptake due to the increased integrin population. The results from preclinical and clinical studies clearly show that radiolabeled cyclic RGD peptides (such as (99m)Tc-3P-RGD2, (18)F-Alfatide-I, and (18)F-Alfatide-II) are useful as the molecular imaging probes for early cancer detection and noninvasive monitoring of the tumor response to antiangiogenic therapy.

Role of integrin subunits in mesenchymal stem cell differentiation and osteoblast maturation on graphitic carbon-coated microstructured surfaces

Surface roughness, topography, chemistry, and energy promote osteoblast differentiation and increase osteogenic local factor production in vitro and bone-to-implant contact in vivo, but the mechanisms involved are not well understood. Knockdown of integrin heterodimer alpha2beta1 (α2β1) blocks the osteogenic effects of the surface, suggesting signaling by this integrin homodimer is required. The purpose of the present study was to separate effects of surface chemistry and surface structure on integrin expression by coating smooth or rough titanium (Ti) substrates with graphitic carbon, retaining surface morphology but altering surface chemistry. Ti surfaces (smooth [Ra < 0.4 μm], rough [Ra ≥ 3.4 μm]) were sputter-coated using a magnetron sputtering system with an ultrapure graphite target, producing a graphitic carbon thin film. Human mesenchymal stem cells and MG63 osteoblast-like cells had higher mRNA for integrin subunits α1, α2, αv, and β1 on rough surfaces in comparison to smooth, and integrin αv on graphitic-carbon-coated rough surfaces in comparison to Ti. Osteogenic differentiation was greater on rough surfaces in comparison to smooth, regardless of chemistry. Silencing integrins β1, α1, or α2 decreased osteoblast maturation on rough surfaces independent of surface chemistry. Silencing integrin αv decreased maturation only on graphitic carbon-coated surfaces, not on Ti. These results suggest a major role of the integrin β1 subunit in roughness recognition, and that integrin alpha subunits play a major role in surface chemistry recognition.

The influence of titanium surfaces treated by alkalis on macrophage and osteoblast-like cell adhesion and gene expression in vitro

The effect of alkali-treated titanium surfaces on inflammation-related gene expression of macrophages and alkaline phosphatase activity of osteoblast-like cells.

Oxidized Titanium Implants Enhance Osseointegration via Mechanisms Involving RANK/RANKL/OPG Regulation

BACKGROUND

The role of implant surface properties for bone formation and bone remodeling, that is, the major events during osseointegration, are incompletely understood.

PURPOSE

This experimental study aimed to investigate the relation between molecular and morphological patterns at the bone interface for machined and oxidized implants.

MATERIALS AND METHODS

Machined and anodically oxidized titanium implants were inserted in rat tibiae. The implants and surrounding tissue were retrieved at 1, 3, 6, 14, or 28 days for gene expression, histology, histomorphometry, backscatter scanning electron microscopy, and transmission electron microscopy.

RESULTS

Compared with machined-surface implants, a higher degree of mineralized bone was found in contact with the oxidized-surface implants. After 3 days, cells adherent to the oxidized implants demonstrated a markedly higher expression of receptor activator of nuclear factor kappa-B (RANK), receptor activator of nuclear factor kappa-B ligand (RANKL), and osteoprotegerin (OPG). Whereas the OPG expression was higher at the machined implants at 6, 14, and 28 days, a higher RANKL/OPG ratio was detected at the oxidized implants. Between 3 and 14 days, both implants demonstrated a temporal increase in RANKL/OPG, corresponding to the remodeling phase at the bone-implant interface. For both implant types, the RANKL/OPG ratio sharply decreased to a low level after 28 days.

CONCLUSIONS

The present results show that oxidized implants rapidly promote a high degree of mineralized bone apposition to the surface. As determined by the gene expression data, the mechanisms involve an early induction of osteoclastic differentiation and subsequently more intensive bone remodeling, which accelerates the maturation of the bone-implant interface. The present study suggests that the RANKL/OPG ratio is a sensitive indicator for monitoring the remodeling process during osseointegration.

FITC-conjugated cyclic RGD peptides as fluorescent probes for staining integrin αvβ3/αvβ5 in tumor tissues

This study sought to evaluate FITC-conjugated cyclic RGD peptides (FITC-RGD₂, FITC-3P-RGD₂, and FITC-Galacto-RGD₂) as fluorescent probes for in vitro assays of integrin α_vβ₃/α_vβ₅ expression in tumor tissues. FITC-RGD₂, FITC-3P-RGD₂, and FITC-Galacto-RGD₂ were prepared, and their integrin α_vβ₃/α_vβ₅ binding affinity was determined using the displacement assay against ¹²⁵I-echistatin bound to U87MG glioma cells. IC₅₀ values of FITC-Galacto-RGD₂, FITC-3P-RGD₂, and FITC-RGD₂ were calculated to be 28 ± 8, 32 ± 7, and 89 ± 17 nM, respectively. The integrin α_vβ₃/α_vβ₅ binding affinity followed a general trend: FITC-Galacto-RGD₂ ∼ FITC-3P-RGD₂ > FITC-RGD₂. The xenografted tumor-bearing models were established by subcutaneous injection of 5 × 10⁶ tumor cells into shoulder flank (U87MG, A549, HT29, and PC-3) or mammary fat pad (MDA-MB-435) of each athymic nude mouse. Three to six weeks after inoculation, the tumor size was 0.1–0.3 g. Tumors were harvested for integrin α_vβ₃/α_vβ₅ staining, as well as hematoxylin and eosin (H&E) staining. Six human carcinoma tissues (colon cancer, pancreatic cancer, lung adenocarcinoma, squamous cell lung cancer, gastric cancer, and esophageal cancer) were obtained from recently diagnosed cancer patients. Human carcinoma slides were deparaffinized in xylene, rehydrated with ethanol, and then used for integrin α_vβ₃/α_vβ₅ staining, as well as H&E staining. It was found that the tumor staining procedures with FITC-conjugated cyclic RGD peptides were much simpler than those with the fluorescence-labeled integrin α_vβ₃ antibodies. Since FITC-RGD₂, FITC-3P-RGD₂, and FITC-Galacto-RGD₂ were able to co-localize with the fluorescence-labeled integrin β₃ antibody, their tumor localization and tumor cell binding are integrin α_vβ₃-specific. Quantification of the fluorescent intensity in five xenografted tumors (U87MG, MDA-MB-435, A549, HT29, and PC-3) and six human carcinoma tissues revealed an excellent linear relationship between the relative integrin α_vβ₃/α_vβ₅ expression levels determined with FITC-Galacto-RGD₂ and those obtained with the fluorescence-labeled anti-human integrin β₃ antibody. There was also an excellent linear relationship between the tumor uptake (%ID/g) of ^99mTc-3P-RGD₂ (an integrin α_vβ₃/α_vβ₅-targeted radiotracer) and the relative integrin α_vβ₃/α_vβ₅ expression levels from the quantification of fluorescent intensity in the tumor tissues stained with FITC-Galacto-RGD₂. These results suggest that FITC-conjugated cyclic RGD peptides might be useful to correlate the in vitro findings with the in vivo imaging data from an integrin α_vβ₃/α_vβ₅-targeted radiotracer. The results from this study clearly showed that the FITC-conjugated cyclic RGD peptides (particularly FITC-3P-RGD₂ and FITC-Galacto-RGD₂) are useful fluorescent probes for assaying relative integrin α_vβ₃/α_vβ₅ expression levels in tumor tissues.

Metallic wear debris may regulate CXCR4 expression in vitro and in vivo

CXCR4, the chemokine receptor for CXCL12, also known as SDF-1 (stromal cell derived factor-1), has been shown to play a pivotal role in bone metastasis, inflammatory, and autoimmune conditions but has not been investigated in periprosthetic osteolysis. We co-cultured osteoblast-like cells with increasing concentrations of metallic (Co-35Ni-20Cr-10Mo and Co-28Cr-6Mo) and Co-ions simulating wear debris. Real-time polymerase chain reaction (RT-PCR) and Western blotting were used to quantify gene and protein expression of CXCR4. The expression of tumor necrosis factor-alpha (TNF-α) and the effects of AMD3100 (bicyclam) on both CXCR4 and TNF-α expression among these cells was investigated. RT-PCR showed an increase in CXCR4 mRNA (7.5-fold for MG63 and 4.0-fold for SaOs-2 cells) among cells co-cultured with metal alloy particles. Western blotting showed a time-dependent increase in protein expression of CXCR4. The attempted blockade of CXCR4 by its known competitive receptor agonist AMD3100 led to a significant inhibition TNF-α mRNA expression. Immunohistochemistry showed CXCR4 positivity among patients with failed metal-on-metal hip replacements and radiographic evidence of osteolysis. Our data collectively suggest that the CXCR4 chemokine is upregulated in a dose- and time-dependent manner in the presence of metallic wear debris.

The Effect of Platelet Proteins Released in Response to Titanium Implant Surfaces on Macrophage Pro-Inflammatory Cytokine Gene Expression

BACKGROUND AND PURPOSE

Platelets are one of the earliest cell types to interact with surgically inserted titanium implants. This in vitro study investigated the effect of titanium surface-induced platelet releasate on macrophage cytokine gene expression.

MATERIALS AND METHODS

To mimic the in vivo temporal sequence of platelet arrival and protein production at the implant surface and the subsequent effect of these proteins on mediators of the immune response, the levels of platelet attachment and activation in response to culture on smooth polished, sandblasted and acid-etched (SLA), and hydrophilic-modified SLA (modSLA) titanium surfaces were first determined by microscopy and protein assay. The subsequent effect of the platelet-released proteins on human THP-1 macrophage cytokine gene expression was determined by polymerase chain reaction array after 1 and 3 days of macrophage culture on the titanium surfaces in platelet-releasate conditioned media.

RESULTS

Platelet attachment was surface dependent with decreased attachment observed on the hydrophilic (modSLA) surface. The platelet releasate, when considered independently of the surface effect, elicited an overall pro-inflammatory response in macrophage cytokine gene expression, that is, the expression of typical pro-inflammatory cytokine genes such as TNF, IL1a, IL1b, and CCL1 was significantly up-regulated whereas the expression of anti-inflammatory cytokine genes such as IL10, CxCL12, and CxCL13 was significantly down-regulated. However, following platelet exposure to different surface modifications, the platelet releasate significantly attenuated the macrophage pro-inflammatory response to microrough (SLA) titanium and hastened an anti-inflammatory response to hydrophilic (modSLA) titanium.

CONCLUSIONS

Theses results demonstrate that titanium surface topography and chemistry are able to influence the proteomic profile released by platelets, which can subsequently influence macrophage pro-inflammatory cytokine expression. This immunomodulation may be an important mechanism via which titanium surface modification influences osseointegration.

Diversity of bone matrix adhesion proteins modulates osteoblast attachment and organization of actin cytoskeleton

Interaction of cells with extracellular matrix is an essential event for differentiation, proliferation and activity of osteoblasts. In bone, binding of osteoblasts to bone matrix is required to determine specific activities of the cells and to synthesize matrix bone proteins. Integrins are the major cell receptors involved in the cell linkage to matrix proteins such as fibronectin, type I collagen and vitronectin, via the RGD-sequences. In this study, cultures of osteoblast-like cells (Saos-2) were done on coated glass coverslips in various culture conditions: DMEM alone or DMEM supplemented with poly-L-lysine (PL), fetal calf serum (FCS), fibronectin (FN), vitronectin (VN) and type I collagen (Col-I). The aim of the study was to determine the specific effect of these bone matrix proteins on cell adherence and morphology and on the cytoskeleton status. Morphological characteristics of cultured cells were studied using scanning electron microscopy and image analysis. The heterogeneity of cytoskeleton was studied using fractal analysis (skyscrapers and blanket algorithms) after specific preparation of cells to expose the cytoskeleton. FAK and MAPK signaling pathways were studied by western blotting in these various culture conditions. Results demonstrated that cell adhesion was reduced with PL and VN after 240 min. After 60 min of adhesion, cytoskeleton organization was enhanced with FN, VN and Col-I. No difference in FAK phosphorylation was observed but MAPK phosphorylation was modulated by specific adhesion on extracellular proteins. These results indicate that culture conditions modulate cell adhesion, cytoskeleton organization and intracellular protein pathways according to extracellular proteins present for adhesion.

Role of nanostructured gold surfaces on monocyte activation and Staphylococcus epidermidis biofilm formation

The role of material surface properties in the direct interaction with bacteria and the indirect route via host defense cells is not fully understood. Recently, it was suggested that nanostructured implant surfaces possess antimicrobial properties. In the current study, the adhesion and biofilm formation of Staphylococcus epidermidis and human monocyte adhesion and activation were studied separately and in coculture in different in vitro models using smooth gold and well-defined nanostructured gold surfaces. Two polystyrene surfaces were used as controls in the monocyte experiments. Fluorescent viability staining demonstrated a reduction in the viability of S. epidermidis close to the nanostructured gold surface, whereas the smooth gold correlated with more live biofilm. The results were supported by scanning electron microscopy observations, showing higher biofilm tower formations and more mature biofilms on smooth gold compared with nanostructured gold. Unstimulated monocytes on the different substrates demonstrated low activation, reduced gene expression of pro- and anti-inflammatory cytokines, and low cytokine secretion. In contrast, stimulation with opsonized zymosan or opsonized live S. epidermidis for 1 hour significantly increased the production of reactive oxygen species, the gene expression of tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β), IL-6, and IL-10, as well as the secretion of TNF-α, demonstrating the ability of the cells to elicit a response and actively phagocytose prey. In addition, cells cultured on the smooth gold and the nanostructured gold displayed a different adhesion pattern and a more rapid oxidative burst than those cultured on polystyrene upon stimulation. We conclude that S. epidermidis decreased its viability initially when adhering to nanostructured surfaces compared with smooth gold surfaces, especially in the bacterial cell layers closest to the surface. In contrast, material surface properties neither strongly promoted nor attenuated the activity of monocytes when exposed to zymosan particles or S. epidermidis.

Genetic networks in osseointegration

Osseointegration-based dental implants have become a well-accepted treatment modality for complete and partial edentulism. The success of this treatment largely depends on the stable integration and maintenance of implant fixtures in alveolar bone; however, the molecular and cellular mechanisms regulating this unique tissue reaction have not yet been fully uncovered. Radiographic and histologic observations suggest the sustained retention of peri-implant bone without an apparent susceptibility to catabolic bone remodeling; therefore, implant-induced bone formation continues to be intensively investigated. Increasing numbers of whole-genome transcriptome studies suggest complex molecular pathways that may play putative roles in osseointegration. This review highlights genetic networks related to bone quality, the transient chondrogenic phase, the vitamin D axis, and the peripheral circadian rhythm to elute the regulatory mechanisms underlying the establishment and maintenance of osseointegration.