Size-dependent inhibition of bacterial growth by chemically engineered spherical ZnO nanoparticles

In vitro assessment of the effect of magnetic fields on efficacy of biosynthesized selenium nanoparticles by Alborzia kermanshahica

Cyanobacteria represent a rich resource of a wide array of unique bioactive compounds that are proving to be potent sources of anticancer drugs. Selenium nanoparticles (SeNPs) have shown an increasing potential as major therapeutic platforms and led to the production of higher levels of ROS that can present desirable anticancer properties. Chitosan-SeNPs have also presented antitumor properties against hepatic cancer cell lines, especially the Cht-NP (Chitosan-NPs), promoting ROS generation and mitochondria dysfunction. It is proposed that magnetic fields can add new dimensions to nanoparticle applications. Hence, in this study, the biosynthesis of SeNPs using Alborzia kermanshahica and chitosan (CS) as stabilizers has been developed. The SeNPs synthesis was performed at different cyanobacterial cultivation conditions, including control (without magnetic field) and magnetic fields of 30 mT and 60 mT. The SeNPs were characterized by uv-visible spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), Dynamic light scattering (DLS), zeta potential, and TEM. In addition, the antibacterial activity, inhibition of bacterial growth, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC), as well as the antifungal activity and cytotoxicity of SeNPs, were performed. The results of uv-visible spectrometry, DLS, and zeta potential showed that 60 mT had the highest value regarding the adsorption, size, and stabilization in compared to the control. FTIR spectroscopy results showed consistent spectra, but the increased intensity of peaks indicates an increase in bond number after exposure to 30 mT and 60 mT. The results of the antibacterial activity and the inhibition zone diameter of synthesized nanoparticles showed that Staphylococcus aureus was more sensitive to nanoparticles produced under 60 mT. Se-NPs produced by Alborzia kermanshahica cultured under a 60 mT magnetic field exhibit potent antimicrobial and anticancer properties, making them a promising natural agent for use in the pharmaceutical and biomedical industries.

Antibacterial Efficacy of ZnO/Bentonite (Clay) Nanocomposites against Multidrug-Resistant Escherichia coli

The emergence of multidrug-resistant (MDR) bacteria has spurred the exploration of therapeutic nanomaterials such as ZnO nanoparticles. However, the inherent nonspecific toxicity of ZnO has posed a significant obstacle to their clinical utilization. In this research, we propose a novel approach to improve the selectivity of the toxicity of ZnO nanoparticles by impregnating them onto a less toxic clay mineral, Bentonite, resulting in ZB nanocomposites (ZB NCs). We hypothesize that these ZB NCs not only reduce toxicity toward both normal and carcinogenic cell lines but also retain the antibacterial properties of pure ZnO nanoparticles. To test this hypothesis, we synthesized ZB NCs by using a precipitation technique and confirmed their structural characteristics through X-ray diffraction and Raman spectroscopy. Electron microscopy revealed composite particles in the size range of 20-50 nm. The BET surface area of ZB NCs, within a relative pressure (P/P0) range of 0.407-0.985, was estimated to be 31.182 m2/g. Notably, 50 mg/mL ZB NCs demonstrated biocompatibility with HCT 116 and HEK 293 cell lines, supported by flow cytometry and fluorescence microscopy analysis. In vitro experiments further confirmed a remarkable five-log reduction in the population of MDR Escherichia coli in the presence of 50 mg/mL of ZB NCs. Antibacterial activity of the nanocomposites was also validated in the HEK293 and HCT 116 cell lines. These findings substantiate our hypothesis and underscore the effectiveness of ZB NCs against MDR E. coli while minimizing nonspecific toxicity toward healthy cells.

Bioinspired fabrication of zinc hydroxide-based nanostructure from lignocellulosic biomass Litchi chinensis leaves and its efficacy evaluation on antibacterial, antioxidant, and anticancer activity

Zinc-based nanostructures are known for their numerous potential biomedical applications. In this context, the biosynthesis of nanostructures using plant extracts has become a more sustainable and promising alternative to effectively replace conventional chemical methods while avoiding their toxic impact. In this study, following a low-temperature calcination process, a green synthesis of Zn-hydroxide-based nanostructure has been performed using an aqueous extract derived from the leaves of Litchi chinensis, which is employed as a lignocellulose waste biomass known to possess a variety of phytocompounds. The biogenic preparation of Zn-hydroxide based nanostructures is enabled by bioactive compounds present in the leaf extract, which act as reducing and capping agents. In order to evaluate its physicochemical characteristics, the produced Zn-hydroxide-based nanostructure has been subjected to several characterization techniques. Further, the multifunctional properties of the prepared Zn-hydroxide-based nanostructure have been evaluated for antioxidant, antimicrobial, and anticancer activity. The prepared nanostructure showed antibacterial efficacy against Bacillus subtilis and demonstrated its anti-biofilm activity as evaluated through the Congo red method. In addition, the antioxidant activity of the prepared nanostructure has been found to be dose-dependent, wherein 91.52 % scavenging activity could be recorded at 200 μg/ml, with an IC50 value of 45.22 μg/ml, indicating the prepared nanostructure has a high radical scavenging activity. Besides, the in vitro cytotoxicity investigation against HepG2 cell lines explored that the as-prepared nanostructure exhibited a higher cytotoxic effect and 73.21 % cell inhibition could be noticed at 25.6 μg/ml with an IC50 of 2.58 μg/ml. On the contrary, it was found to be significantly lower in the case of HEK-293 cell lines, wherein ~47.64 % inhibition could be noticed at the same concentration. These findings might be further extended to develop unique biologically derived nanostructures that can be extensively evaluated for various biomedical purposes.

In Vitro Efficacy of Isobutyl Cyanoacrylate Nanoparticles against Fish Bacterial Pathogens and Selection Preference by Rainbow Trout (Oncorhynchus mykiss)

The upsurge in havoc being wreaked by antibiotic-resistant bacteria has led to an urgent need for efficacious alternatives to antibiotics. This study assessed the antibacterial efficacy of two isobutyl cyanoacrylate nanoparticles (iBCA-NPs), D6O and NP30, against major bacterial pathogens of fish. In vivo tests on rainbow trout were preceded by in vitro tests of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). NP30 exhibited higher efficacy than D60, but both iBCA-NPs demonstrated dose-dependent and species-specific in vitro antibacterial properties against the bacterial isolates. Generally, Gram-negative bacteria were more resistant to the iBCA-NPs. Streptococcus iniae, Tenacibaculum maritimum, and Photobacterium damselae were particularly sensitive to both iBCA-NPs. Administered to rainbow trout at 3571.4 mg (iBCA-NP)/kg feed, the iBCA-NPs produced a relative gain rate and survival rates comparable to the control (p > 0.05). The condition factor and the hepatosomatic and viscerosomatic indices of fish were indifferentiable (p > 0.05) between the iBCA-NP groups and the control. The iBCA-NPs caused no alteration in stress, oxidative stress (superoxide dismutase, SOD), plasma complement titer, or lysozyme activity. This study presents the first report of antibacterial activity of iBCA-NPs against Gram-negative bacteria. The results of this study suggest that D60 and NP30 may contribute to reducing the amounts of antibiotics and chemotherapeutic agents used in aquaculture.

Advancements in Composite Materials and Their Expanding Role in Biomedical Applications

The synthesis of a Ni-doped ZnO nanocomposite incorporating chitosan (CS/Ni-doped ZnO) was achieved via a precipitation method, followed by annealing at 250 °C. This study comprehensively examined the nanocomposite's structural, functional, morphological, and porosity properties using various analytical techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), high-resolution scanning electron microscopy (HR-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis. The presence of chitosan (CS) and nickel (Ni) within the nanocomposite, along with their influence on reducing the band gap of ZnO particles and enhancing the generation of electron-hole pairs, was confirmed using UV-visible near-infrared spectroscopy (UV-vis-NIR). The electrochemical properties of the CS/Ni-doped ZnO nanocomposite were investigated via electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) by utilizing a phosphate buffer solution with a pH of 6, which closely resembled the typical pH of bacterial cell walls. Finally, the prepared CS/Ni-doped ZnO nanocomposite was evaluated for its antibacterial and anticancer activities. The results demonstrated the highest inhibition of bacterial growth in P. vulgaris, whereas the lowest inhibition was found in S. aureus across various concentrations, thus highlighting its potential in antimicrobial applications. The cytotoxicity of CS/Ni-doped ZnO nanocomposites demonstrated remarkable effects with a half-maximum inhibitory concentration of approximately 80 ± 0.23 µg mL-1 against MCF-7 breast cancer cell lines, following a dose-dependent manner.

Development of alginate-based film incorporated with anthocyanins of red cabbage and zinc oxide nanoparticles as freshness indicator for prawns

The objective of this study was to develop pH-sensitive film indicators for intelligent food packaging by incorporating red cabbage anthocyanins (RCA) and zinc oxide nanoparticles (ZnO NPs) into an alginate (Alg) film, aiming to mitigate the risk of foodborne illnesses. The films were fabricated using a solvent-casting method and crosslinked with a calcium chloride (CaCl2) solution. Thorough evaluations of the films' physical, mechanical, and structural properties demonstrated significant improvements in elastic modulus and UV/vis light barrier characteristics, reduced water vapor permeability (WVP), and moisture content attributed to integrating RCA and ZnO NPs. The resulting film displayed discernible color changes when exposed to various pH buffer solutions and ammonia vapor, indicating heightened sensitivity to pH fluctuations due to the presence of ZnO NPs. Visual assessment using prawns as test specimens revealed a color shift from violet (indicating satisfactory condition) to blue-greenish (indicating spoilage), corroborated by colorimetric analysis. Moreover, the Alg/ZnO/RCA film exhibited antioxidant and antibacterial properties, demonstrated biodegradation activity, and showed no toxic effects on RSC96 cells, further underscoring its potential as an effective freshness indicator for food products.

Antifungal screening of selenium nanoparticles biosynthesized by microcystin-producing Desmonostoc alborizicum

Metal nanoparticles exhibit excellent antifungal abilities and are seen as a good substitute for controlling different kinds of fungi. Of all known taxa, cyanobacteria have received significant consideration as nanobiofactories, as a result of the cellular assimilation of heavy metals from the environment. The cellular bioactive enzymes, polysaccharides and pigments can be used as reducers and coatings during biosynthesis. The probability of the antifungal activity of selenium nanoparticles (SeNPs) to prevent plant fungi that can affect humans was evaluated and a toxic Iranian cyanobacterial strain of Desmonostoc alborizicum was used to study the biotechnology of SeNP synthesis for the first time. Characterization of nanoparticles with a UV-Vis spectrophotometer showed the formation of SeNPs in the range of 271-275 nm with the appearance of an orange color. Morphological examination of nanoparticles with Transmission Electron Microscopy (TEM), revealed the spherical shape of nanoparticles. The results of X-Ray Diffraction (XRD) showed 7 peaks and a hexagonal structure of average crystal size equal to 58.8 nm. The dispersion index of SeNPs was reported as 0.635, which indicated the homogeneity of the nanoparticle droplet size. The zeta potential of the nanoparticles was + 22.7. Fourier-transform infrared spectroscopy (FTIR) analysis exhibited a sharp and intense peak located at the wave number of 404 cm- 1, related to the SeNPs synthesized in this research. The results of the antifungal activity of SeNPs showed among the investigated fungi, Pythium ultimum had the highest resistance to SeNPs (14.66 ± 0.52 µg/ml), while Alternaria alternata showed the highest sensitivity (9.66 ± 0.51 µg/ml) (p < 0.05). To the best of our knowledge this is the first report concerning the characterization and antifungal screening of SeNPs biosynthesized by Iranian cyanobacteria, which could be used as effective candidates in medical applications.

Recent advances in metal nanoparticles to treat periodontitis

The gradual deterioration of the supporting periodontal tissues caused by periodontitis, a chronic multifactorial inflammatory disease, is thought to be triggered by the colonization of dysbiotic plaque biofilms in a vulnerable host. One of the most prevalent dental conditions in the world, periodontitis is now the leading factor in adult tooth loss. When periodontitis does develop, it is treated by scraping the mineralized deposits and dental biofilm off the tooth surfaces. Numerous studies have shown that non-surgical treatment significantly improves clinical and microbiological indices in individuals with periodontitis. Although periodontal parameters have significantly improved, certain bacterial reservoirs often persist on root surfaces even after standard periodontal therapy. Periodontitis has been treated with local or systemic antibiotics as well as scaling and root planning. Since there aren't many brand-new antibiotics on the market, several researchers are currently concentrating on creating alternate methods of combating periodontal germs. There is a delay in a study on the subject of nanoparticle (NP) toxicity, which is especially concerned with mechanisms of action, while the area of nanomedicine develops. The most promising of them are metal NPs since they have potent antibacterial action. Metal NPs may be employed as efficient growth inhibitors in a variety of bacteria, making them useful for the treatment of periodontitis. In this way, the new metal NPs contributed significantly to the development of efficient anti-inflammatory and antibacterial platforms for the treatment of periodontitis. The current therapeutic effects of several metallic NPs on periodontitis are summarized in this study. This data might be used to develop NP-based therapeutic alternatives for the treatment of periodontal infections.

Biosynthesis and Optimization of ZnO Nanoparticles Using Ocimum lamifolium Leaf Extract for Electrochemical Sensor and Antibacterial Activity

In this study, zinc oxide nanoparticles (ZnO NPs) were synthesized using an aqueous extract of the Ocimum lamifolium (O. lamifolium) plant. The I-optimal coordinate exchange randomized response surface methodology (RSM) was used to optimize the effect of the zinc acetate precursor, temperature, and time on ZnO NPs by designing nine runs. From ANOVA analysis, the significance and validity of the designed model showed that the optimal values of the zinc acetate precursor, temperature, and time during ZnO NPs synthesis were found to be ∼0.06 M, ∼30 °C, and ∼1.35 h, respectively. The obtained ZnO NPs under these optimized conditions were characterized and explored by UV-vis, TGA/DTA, FTIR, XRD, SEM-EDX, TEM, HRTEM, and SAED. Furthermore, the electrocatalytic performance of ZnO NPs was performed for sulfamethoxazole (SMZ) sensing activity with a 0.3528 μM (S/N = 3) limit of detection (LOD). In addition, an antibacterial study revealed that ZnO NPs confirmed an excellent zone of inhibition against E. coli, S. aureus, P. aeruginosa, and S. pyogen pathogenic drug resistance bacterial strains at concentrations of 50, 75, and 100 μg/mL. Thus, ZnO NPs synthesized using the O. lamifolium leaf have a potential electrocatalytic activity for diverse organic pollutant detection as well as a desirable material for such drug resistance antimicrobial strains.

Antibacterial and Anti-Acne Activity of Benzoyl Peroxide Nanoparticles Incorporated in Lemongrass Oil Nanoemulgel

Purpose: The goal of this study was to make Benzoyl Peroxide (BPO) nanoemulgel to improve its ability to kill bacteria. BPO has trouble getting into the skin, being absorbed by the skin, staying stable, and being spread out. Methods: A BPO nanoemulgel formulation was prepared by combining BPO nanoemulsion with Carbopol hydrogel. The drug was tested for solubility in various oils and surfactants in order to select the best oil and surfactant for the drug, and then the drug nanoemulsion formulation was prepared using a self-nano-emulsifying technique with Tween 80, Span 80, and lemongrass oil. The drug nanoemulgel was looked at in terms of its particle size, polydispersity index (PDI), rheological behavior, drug release, and antimicrobial activity. Results: Based on the solubility test results, lemongrass oil was the best solubilizing oil for drugs, while Tween 80 and Span 80 demonstrated the highest solubilizing ability for drugs among the surfactants. The optimum self-nano-emulsifying formulation had particle sizes of less than 200 nm and a PDI of close to zero. The results showed that incorporating the SNEDDS formulation of the drug with Carbopol at various concentrations did not cause a significant change in the particle size and PDI of the drug. The zeta potential results for drug nanoemulgel were negative, with more than 30 mV. All nanoemulgel formulations exhibited pseudo-plastic behavior, with 0.4% Carbopol exhibiting the highest release pattern. The drug nanoemulgel formulation worked better against bacteria and acne than the product on the market. Conclusion: Nanoemulgel is a promising way to deliver BPO because it makes the drug more stable and increases its ability to kill bacteria.

<i>In Vitro</i> Evaluation of Antibacterial Properties of Biogenically Synthesized Zinc Oxide Nanoparticles on Pathogenic Paddy Bacteria

Zinc oxide nanoparticles (ZnO-NP) were successfully synthesized from aloe vera extract and zinc sulphate as zinc precursor. Characterizations of the ZnO-NP were performed using UV–Vis spectrophotometer, XRD, FESEM and TEM analysis. The absorption peak from UV–Vis was at 380 nm while the XRD diagram displays high purity ZnO-NP. FESEM and TEM analysis showed agglomerated particles with a wide size distribution range. Polymerase chain reaction (PCR) analysis of Xanthomonas oryzae pv. oryzae (Xoo) pathotype 0.0 generated a product with the size of 230 bp similar to in silico PCR results, verifying the pathotype on molecular level. Subsequently, the antimicrobial activities of the ZnO-NP against Xoo pathotype 0.0 were assessed. Xoo (108 cfu/ml) were grown in LB broth supplemented with various concentrations of ZnO-NP. Collection of samples were done at 24 hours, 48 hours and 72 hours of incubation, grown on LB agar and observed for bacterial growth. Colony forming unit (cfu/ml) values revealed the number of viable cells decreased with high concentrations of ZnO-NP whereas minimal inhibition was observed at lower ZnO-NP concentrations. At lower bacteria cfu/ml (103 cfu/ml), it was found that at 24 hours incubation, ZnO-NP gave comparable antibacterial effects to commercial ZnO-NP and commercial non-nanoZnO after exposure for 1 hour. However, the antimicrobial effects decreased after 48 hours. It was also noted that the ZnO-NP provide better suppression of bacterial growth at lower bacterial concentration.

Preparation of Novel Composites of Polyvinyl Alcohol Containing Hesperidin Loaded ZnO Nanoparticles and Determination of Their Biological and Thermal Properties

Hesperidin (HSP) is considered to be the most effective antimicrobial agent against SARS-CoV2 virus. The HSP was loaded onto ZnO nanoparticles that were successfully incorporated, via the hydrothermal method, into polyvinyl alcohol (PVA) for use as food packaging material. The hydrothermal method enabled the bioactive ZnO-HSP to be homogeneously dispersed in the PVA, which significantly increased the thermal stability of the matrix, while decreasing the softening temperature. The water holding capacity and water solubility of the obtained nanocomposites was reduced compared to the PVA. Finally, the ZnO-HSP antimicrobial agent contributed important antibacterial properties to the PVA and increased its antioxidant capacity against Staphylococcus aureus and Escherichia coli pathogens. In addition, the nanocomposites had no cytotoxic/proliferative effects on cancer cells. All results showed promise that the PVA/ZnO-HSP nanocomposites would be an excellent alternative for food packaging applications.

Antifungal Activity of Selenium Nanoparticles Obtained by Plant-Mediated Synthesis

The continuous need to satisfy world food demand has led to the search for new alternatives to combat economic losses in agriculture caused by phytopathogenic fungi. These organisms cause plant diseases, reducing their productivity and decreasing fruit quality. Among the new tools being explored is nanotechnology. Nanoparticles with antimicrobial properties could be an excellent alternative to address this problem. In this work, selenium nanoparticles (SeNPs) were obtained using plant extracts of Amphipterygium glaucum leaves (SeNPs-AGL) and Calendula officinalis flowers (SeNPs-COF). Characterization of the SeNPs was performed and their ability as antifungal agents against two commercially relevant plant pathogenic fungi, Fusarium oxysporum and Colletotrichum gloeosporioides, was evaluated. Assays were performed with different concentrations of SeNPs (0, 0.25, 0.5, 1.0, and 1.7 mg/mL). It was observed that both SeNPs had antifungal activity against both plant pathogens at concentrations of 0.25 mg/mL and above. SeNPs-AGL demonstrated better antifungal activity and smaller size (around 8.0 nm) than SeNPs-COF (134.0 nm). FTIR analysis evidenced the existence of different functional groups that constitute both types of SeNPs. There are factors that have to be considered in the antimicrobial activity of SeNPs such as nanoparticle size and phytochemical composition of the plant extracts used, as these may affect their bioavailability.

Antibacterial lignin-based nanoparticles and their use in composite materials

Lignin, one of the most abundant biopolymers on earth, has been traditionally considered a low-value by-product of the pulp and paper industries. This renewable raw material, besides being a source of valuable molecules for the chemical industry, also has antioxidant, UV-absorbing, and antibacterial properties in its macromolecular form. Moreover, lignin in the form of nanoparticles (LigNPs) presents advantages over bulk lignin, such as higher reactivity due to its larger surface-to-volume ratio. In view of the rapid surge of antimicrobial resistance (AMR), caused by the overuse of antibiotics, continuous development of novel antibacterial agents is needed. The use of LigNPs as antibacterial agents is a suitable alternative to conventional antibiotics for topical application or chemical disinfectants for surfaces and packaging. Besides, their multiple and unspecific targets in the bacterial cell may prevent the emergence of AMR. This review summarizes the latest developments in antibacterial nano-formulated lignin, both in dispersion and embedded in materials. The following roles of lignin in the formulation of antibacterial NPs have been analyzed: (i) an antibacterial active in nanoformulations, (ii) a reducing and capping agent for antimicrobial metals, and (iii) a carrier of other antibacterial agents. Finally, the review covers the inclusion of LigNPs in films, fibers, hydrogels, and foams, for obtaining antibacterial lignin-based nanocomposites for a variety of applications, including food packaging, wound healing, and medical coatings.

Promising advances in nanobiotic-based formulations for drug specific targeting against multidrug-resistant microbes and biofilm-associated infections

Antimicrobial agents and alternative strategies to combat bacterial infections have become urgent due to the rapid development of multidrug-resistant bacteria caused by the misuse and overuse of antibiotics, as well as the ineffectiveness of antibiotics against difficult-to-treat infectious diseases. Nanobiotics is one of the strategies being explored to counter the increase in antibiotic-resistant bacteria. Nanobiotics are antibiotic molecules encapsulated in nanoparticles or artificially engineered pure antibiotics that are ≤ 100 nm in size in at least one dimension. Formulation scientists recognize nanobiotic delivery systems as an effective strategy to overcome the limitations associated with conventional antibiotic therapy. This review highlights the general mechanisms by which nanobiotics can be used to target resistant microbes and biofilm-associated infections. We focus on the design elements, properties, characterization, and toxicity assessment of organic nanoparticles, inorganic nanoparticle and molecularly imprinted polymer-based nano-formulations that can be designed to improve the efficacy of nanobiotic formulation.

Metallic Nanoparticles: A New Frontier in the Fight Against Leishmaniasis

Abstract:

Leishmaniasis is a cutaneous, mucocutaneous, or visceral parasitic disease caused by protozoa of the Leishmania genus. According to the World Health Organization, Leishmaniasis causes approximately 20–40 thousand deaths annually, and Brazil, India, and some countries in Africa are the most affected by this neglected disease. In addition to parasite’s ability to evade the host’s immune system, the incidence of vectors, the genetics of different hosts, and the large number of deaths are mainly due to failures in conventional treatments that have high toxicity, low effectiveness, and prolonged therapeutic regimens. Thus, the development of new alternative therapeutics with more effective and safer actions has become one of the main challenges for researchers studying leishmaniasis. Among the many research and tested options, metallic nanoparticles, such as gold, silver, zinc oxide, and titanium dioxide, have been shown to be one of the most promising therapeutic tool because they are easily prepared and chemically modified, have a broad spectrum of action, low toxicity, and can generate reactive oxygen species and other immune responses that favor their use against different species of Leishmania. This review explores the progress of the use of metallic nanoparticles as a new tool in the treatment of leishmaniasis, as well as discusses the gaps in knowledge that need to be addressed to consolidate a safe, effective, and definitive therapeutic intervention against these infections.

Antibacterial action and target mechanisms of zinc oxide nanoparticles against bacterial pathogens

Zinc oxide nanoparticles (ZnO NPs) are one of the most widely used nanoparticulate materials due to their antimicrobial properties, but their main mechanism of action (MOA) has not been fully elucidated. This study characterized ZnO NPs by using X-ray diffraction, FT-IR spectroscopy and scanning electron microscopy. Antimicrobial activity of ZnO NPs against the clinically relevant bacteria Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and the Gram-positive model Bacillus subtilis was evaluated by performing resazurin microtiter assay (REMA) after exposure to the ZnO NPs at concentrations ranging from 0.2 to 1.4 mM. Sensitivity was observed at 0.6 mM for the Gram-negative and 1.0 mM for the Gram-positive cells. Fluorescence microscopy was used to examine the interference of ZnO NPs on the membrane and the cell division apparatus of B. subtilis (amy::pspac-ftsZ-gfpmut1) expressing FtsZ-GFP. The results showed that ZnO NPs did not interfere with the assembly of the divisional Z-ring. However, 70% of the cells exhibited damage in the cytoplasmic membrane after 15 min of exposure to the ZnO NPs. Electrostatic forces, production of Zn²⁺ ions and the generation of reactive oxygen species were described as possible pathways of the bactericidal action of ZnO. Therefore, understanding the bactericidal MOA of ZnO NPs can potentially help in the construction of predictive models to fight bacterial resistance.

A portable NIR fluorimeter directly quantifies singlet oxygen generated by nanostructures for Photodynamic Therapy

This paper reports on the setting up and calibration of a portable NIR fluorimeter specifically developed for quantitative direct detection of the highly reactive singlet oxygen (¹O₂) chemical specie, of great importance in Photodynamic therapies. This quantification relies on the measurement of fluorescence emission of ¹O₂, which is peaked in the near-infrared (NIR) at λ=1270nm. In recent years, several nanostructures capable of generating reactive oxygen species (ROS) when activated by penetrating radiation (X-rays, NIR light) have been developed to apply Photodynamic Therapy (PDT) to tumours in deep tissue, where visible light cannot penetrate. A bottleneck in the characterization of these nanostructures is the lack of a fast and reliable technique to quantitatively assess their performances in generating ROS, and in particular ¹O₂. For instance, the widely used PDT "Singlet Oxygen Sensor Green" kit suffers from self-activation under X-ray irradiation. To solve this difficulty, we propose here direct detection of ¹O₂ by spectroscopic means, using an apparatus developed by us around a recent thermoelectrically-cooled InGaAs single photon avalanche photodiode (SPAD). The SPAD is coupled to a custom-made integrating sphere designed for use under irradiation with high-energy X-ray beams from clinical Radiotherapy sources. We determine the detection threshold for our apparatus, which turns to be ∼9·10⁸¹O₂ in realistic experimental condition and for measurements extending to 1 min of integration. After calibrations on standard photosensitizers, we demonstrate the potentiality of this instrument characterizing some photosensitizing nanostructures developed by us.

Enzymatically-degradable hydrogel coatings on titanium for bacterial infection inhibition and enhanced soft tissue compatibility via a self-adaptive strategy

Ideal percutaneous titanium implants request both antibacterial ability and soft tissue compatibility. ZnO structure constructed on titanium has been widely proved to be helpful to combat pathogen contamination, but the biosafety of ZnO is always questioned. How to maintain the remarkable antibacterial ability of ZnO and efficiently reduce the corresponding toxicity is still challenging. Herein, a hybrid hydrogel coating was constructed on the fabricated ZnO structure of titanium, and the coating was proved to be enzymatically-degradable when bacteria exist. Then the antibacterial activity of ZnO was presented. When under the normal condition (no bacteria), the hydrogel coating was stable and tightly adhered to titanium. The toxicity of ZnO was reduced, and the viability of fibroblasts was largely improved. More importantly, the hydrogel coating provided a good buffer zone for cell ingrowth and soft tissue integration. The curbed Zn ion release was also proved to be useful to regulate fibroblast responses such as the expression of CTGF and COL-I. These results were also validated by in vivo studies. Therefore, this study proposed a valid self-adaptive strategy for ZnO improvement. Under different conditions, the sample could present different functions, and both the antibacterial ability and soft tissue compatibility were finely preserved.

•

Enzymatically-degradable hydrogel coatings are prepared on the ZnO structure of titanium.

•

The degradation of the hydrogel coating is accelerated when S. aureus exists and the remarkable antibacterial activity of ZnO is presented.

•

The hydrogel coating is stable and tightly adhered on ZnO when no bacteria exists and the toxicity of ZnO is largely reduced.

•

The fibroblast responses and soft tissue compatibility are improved.

Increased particle size of goethite enhances the antibacterial effect on human pathogen Escherichia coli O157:H7: A Raman spectroscopic study

The persistence of Escherichia coli O157:H7 in soil is one of the most common causes of the food-borne outbreaks. Nano-sized iron oxide minerals in soil, especially goethite, have been found to reduce bacterial viability, which helps to control the spread of human pathogens. However, little is known about the antibacterial effects of iron oxides with different particle sizes. Our result revealed that the micro-sized goethite exhibited a more effective antibacterial activity against E. coli O157:H7 than the nano-sized goethite. The underlying antibacterial mechanisms were further investigated via single-cell Raman microspectroscopy. The exposure to nano-sized goethite increased the levels of ribonucleoside-related substances, phenylalanine and adenosine 5'-triphosphate, while decreased those of glycogen, protein and lipopolysaccharide & outer membrane porins (LPS & OMPs). Meanwhile, micro-sized goethite triggered less variation in ribonucleoside-related substances and induced more reduction in LPS & OMPs. Therefore, the antibacterial effects of nano-sized goethite were mediated by both ROS-dependent RNA damage and cell membrane destruction, whereas micro-sized goethite induced severer membrane damage and less ROS-dependent oxidative stress. This work demonstrates the role of particle sizes in antibacterial effects of iron oxides and provides implications for the pathogen control in soil.

Nanomaterial-mediated autophagy: coexisting hazard and health benefits in biomedicine

BACKGROUND

Widespread biomedical applications of nanomaterials (NMs) bring about increased human exposure risk due to their unique physicochemical properties. Autophagy, which is of great importance for regulating the physiological or pathological activities of the body, has been reported to play a key role in NM-driven biological effects both in vivo and in vitro. The coexisting hazard and health benefits of NM-mediated autophagy in biomedicine are nonnegligible and require our particular concerns.

MAIN BODY

We collected research on the toxic effects related to NM-mediated autophagy both in vivo and in vitro. Generally, NMs can be delivered into animal models through different administration routes, or internalized by cells through different uptake pathways, exerting varying degrees of damage in tissues, organs, cells, and organelles, eventually being deposited in or excreted from the body. In addition, other biological effects of NMs, such as oxidative stress, inflammation, necroptosis, pyroptosis, and ferroptosis, have been associated with autophagy and cooperate to regulate body activities. We therefore highlight that NM-mediated autophagy serves as a double-edged sword, which could be utilized in the treatment of certain diseases related to autophagy dysfunction, such as cancer, neurodegenerative disease, and cardiovascular disease. Challenges and suggestions for further investigations of NM-mediated autophagy are proposed with the purpose to improve their biosafety evaluation and facilitate their wide application. Databases such as PubMed and Web of Science were utilized to search for relevant literature, which included all published, Epub ahead of print, in-process, and non-indexed citations.

CONCLUSION

In this review, we focus on the dual effect of NM-mediated autophagy in the biomedical field. It has become a trend to use the benefits of NM-mediated autophagy to treat clinical diseases such as cancer and neurodegenerative diseases. Understanding the regulatory mechanism of NM-mediated autophagy in biomedicine is also helpful for reducing the toxic effects of NMs as much as possible.

Toxicity of Different Zinc Oxide Nanomaterials at 3 Trophic Levels: Implications for Development of Low-Toxicity Antifouling Agents

Because zinc oxide (ZnO) nanomaterials are used in antifouling and antibacterial solutions, understanding their toxic effects on different aquatic organisms is essential. In the present study, we evaluated the toxicity of ZnO nanoparticles of 10 to 30 nm (ZnONPI) and 80 to 200 nm (ZnONPII), ZnO nanorods (width 80 nm, height 1.7 µm) attached to the support substrate (glass, ZnONRG) and not attached (ZnONRS), as well as Zn²⁺ ions at concentrations ranging from 0.5 to 100 mg/L. Toxicity was evaluated using the microalga Dunaliella salina, the brine shrimp Artemia salina, and the marine bacterium Bacillus cereus. The highest toxicity was observed for ZnONPs (median lethal concentration [LC50] ~15 mg/L) and Zn²⁺ ions (LC50 ~13 mg/L), whereas the lowest toxicity found for ZnO nanorods (ZnONRG LC50 ~60 mg/L; ZnONRS LC50 ~42 mg/L). The presence of the support substrate in case of ZnO nanorods reduced the associated toxicity to aquatic organisms. Smaller ZnONPs resulted in the highest Zn²⁺ ion dissolution among tested nanostructures. Different aquatic organisms responded differently to ZnO nanomaterials, with D. salina and B. cereus being more sensitive than A. salina. Toxicity of nanostructures increased with an increase of the dose and the time of exposure. Supported ZnO nanorods can be used as a low-toxicity alternative for future antimicrobial and antifouling applications. Environ Toxicol Chem 2020;39:1343-1354. © 2020 SETAC.

Metal/Metal Oxide Nanoparticles: Toxicity, Applications, and Future Prospects

The ever-growing resistance of pathogens to antibiotics and crop disease due to pest has triggered severe health concerns in recent years. Consequently, there is a need of powerful and protective materials for the eradication of diseases. Metal/metal oxide nanoparticles (M/MO NPs) are powerful agents due to their therapeutic effects in microbial infections. In this context, the present review article discusses the toxicity, fate, effects and applications of M/MO NPs. This review starts with an introduction, followed by toxicity aspects, antibacterial and testing methods and mechanism. In addition, discussion on the impact of different M/MO NPs and their characteristics such as size, shape, particle dissolution on their induced toxicity on food and plants, as well as applications in pesticides. Finally, prospective on current and future issues are presented.

Small molecule-decorated gold nanoparticles for preparing antibiofilm fabrics

The increase in antibiotic resistance reported worldwide poses an immediate threat to human health and highlights the need to find novel approaches to inhibit bacterial growth. In this study, we present a series of gold nanoparticles (Au NPs) capped by different N-heterocyclic molecules (N_Au NPs) which can serve as broad-spectrum antibacterial agents. Neither the Au NPs nor N-heterocyclic molecules were toxic to mammalian cells. These N_Au NPs can attach to the surface of bacteria and destroy the bacterial cell wall to induce cell death. Sonochemistry was used to coat Au NPs on the surface of fabrics, which showed superb antimicrobial activity against multi-drug resistant (MDR) bacteria as well as excellent efficacy in inhibiting bacterial biofilms produced by MDR bacteria. Our study provides a novel strategy for preventing the formation of MDR bacterial biofilms in a straightforward, low-cost, and efficient way, which holds promise for broad clinical applications.

Time-dependent effects of ZnO nanoparticles on bacteria in an estuarine aquatic environment

Many studies have examined the acute toxicity of nanoparticles (NPs) towards model bacteria. In this study, we report the time-dependent effects of ZnO NPs on native, selected Zn-resistant and dominant bacteria in estuarine waters. An initial inhibition of bacterial growth followed by a recovery at 24 h was observed, and this rebound phenomenon was particularly notable when the raw water samples were treated with relatively high ZnO NP concentrations (1 and 10 mg/L).By comparing the groups treated with Zn²⁺, Zn²⁺ was shown to largely explain the acute cytotoxic effect of ZnO NPs on bacteria in raw waters. Furthermore, similar to the native bacteria, especially the dominant bacteria, the viability of Escherichia coli (E. coli) decreased with the increasing treatments time and the concentrations of ZnO NPs in water with different salinities. Moreover, the expression of Zn-resistance genes including zntA and zntR in E. coli suggested that the Zn-resistance system in E. coli can be activated to defend against the stress of Zn²⁺ released from ZnO NPs, and salinity may promote this process in estuarine aquatic systems. Thus, the effect of ZnO NPs on bacteria in estuarine water bodies is likely determined by the synergistic effect of environmental salinity and dissolved Zn ions. As such, our findings are of high relevance and importance for understanding the ecological disturbances caused by anthropogenic NPs in estuarine environments.