Response Surface Methodology Optimization of Mono-dispersed MgO Nanoparticles Fabricated by Ultrasonic-Assisted Sol–Gel Method for Outstanding Antimicrobial and Antibiofilm Activities

Harnessing Theraoenergetics for Cartilage Regeneration: Development of a Therapeutic and Bioenergetic Loaded Janus Nanofiber Reinforced Hydrogel Composite for Cartilage Regeneration

Advancements in tissue engineering and regenerative medicine have highlighted different strategies of engineering and designing hydrogels to replicate the intricate structure of cartilage extracellular matrix (ECM) for effective cartilage regeneration. However, despite efforts to meet the elevated structural and mechanical demands of cartilage repair, researchers often overlook the challenging environmental conditions at damaged cartilage sites such as inflammation, hypoxia, and the limited availability of nutrients and energy, which are critical for supporting tissue regeneration. The insufficient oxygen, nutrient availability, and oxidative stress in avascular cartilage limit the oxidative phosphorylation-mediated bioenergetics in cells needed for energy demands required for anabolic biosynthesis, cell division, and migration during tissue repair. Thus, there is a need to develop an advanced approach to engineer a unique hydrogel system that not only provides intricate structural properties but also integrates therapeutics (like anti-inflammatory, reactive oxygen species (ROS) scavenging) and bioenergetics (like oxygen, energy demand) into the hydrogel, which may offer a holistic and effective solution for repairing cartilage defects under a harsh microenvironment. In this study, we engineered an innovative approach to develop a new class of theraoenergetic hydrogel system by reinforcing a Janus nanofiber (JNF) carrying therapeutic (MgO) and bioenergetic (polyglutamic acid), PGA) components into a dual network photo-crosslinkable hydrogel. Reinforcement of JNF microfragments and the photo-crosslinking dual network of synthesized gelatin methacryloyl (GelMA) and carboxymethyl chitosan (CMCh) not only enhances the hydrogel's mechanical properties by 800% to withstand mechanical load but also ensures a controlled release of magnesium, oxygen, and PGA over 30 days. Co-delivery of magnesium and bioenergetic PGA with oxygen helped synergistically to reduce intracellular ROS and inflammatory markers IL-6 and TNF-α, providing a supportive environment for enhancing cell mitochondrial oxidative metabolism leading to active proliferation and chondrogenic differentiation of stem cells to deposit glycosaminoglycan (GAG)-rich extracellular matrix to regenerate cartilage. The developed theraoenergetic hydrogel system represents a promising solution for regenerating cartilage under a harsh microenvironment to treat osteoarthritis, a rising global health burden.

Investigating antibacterial activity of biosynthesized silver oxide nanoparticles using Phragmanthera Macrosolen L. leaf extract

The crude leaf extract of Phragmanthera macrosolen L. has been utilized for the first time as an effective reducing, capping and stabilizing agent to synthesize silver oxide nanoparticles (Ag2O NPs) through a green approach. The prepared Ag2O NPs were analyzed by scanning electron-microscopy (SEM), High Resolution Transmission electron microscope (HR-TEM), X-ray diffractions (XRD), Fourier transforms infrared (FTIR) spectroscopy, energy dispersive spectroscopy (EDS), and Ultra-violet visible spectrometry (UV-Vis). The biosynthesized Ag2O NPs applied on gram-positive (S. aureus) and gram-negative (E. coli) bacterial types. FTIR spectral peaks indicate that the phytochemicals in the extract are responsible for the formation of Ag2O nanoparticles. The XRD result shown, poly-crystalline nanoparticles and the average crystalline size calculated was 45.8 nm. UV-Vis analysis shows absorbance existed at 590.5 nm, and the energy band gap calculated through the Tauc relation was 2.1 eV. The SEM images gave a globular and some rod like morphology with diameter of particle obtained between 20.11 and 46.50 nm with some hollow cubic microstructure of Ag2O NPs which makes it suitable for antimicrobial application. The EDS confirms the elemental composition and existence of Ag and O2. The HR-TEM images, specific area electron diffraction (SAED), and XRD patterns confirmed the morphology of Ag2O NPs mean 45.84 nm and polycrystalline nature of the nanoparticles. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were 15 and 30 µl respectively for the samples tested. In this study, it was observed that Ag2O NPs highly sensitive to E. coli than s. aureus. The present study revealed that the possible use of green synthesized Ag2O NPs as potential antibacterial agent.

Investigating the in vitro antibacterial, antibiofilm, antioxidant, anticancer and antiviral activities of zinc oxide nanoparticles biofabricated from Cassia javanica

It is thought to be risk-free, environmentally benign, and safe for biological processes to produce zinc oxide nanoparticles from renewable resources. This study examined Cassia javanica's ability to create ZnONPs. The generated ZnONPs were analyzed using a variety of techniques, such as TEM, FTIR spectroscopy, UV-Vis spectroscopy, and XRD analysis. The antibacterial potential of ZnONPs has been investigated using both Agar well diffusion and microtitreplate (MTP) methods. One method used to evaluate ZnONPs' capacity to scavenge free radicals at different concentrations was the DPPH method. The permanent zinc oxide (ZnO) shape and the naturally occurring crystal structure of ZnONPs were validated by the XRD data. ZnONPs showed antibacterial activity with MICs of 31.7 μg/mL toward Bacillus subtilis, 62.5 μg/mL for Salmonella typhimurium, Escherichia coli while Clostridium sporogenes and Bacillus pumilus was 125μg/mL. Furthermore, ZnONPs demonstrated a range of antibiofilm activities toward Staphylococcus aureus (MRSA). ZnONPs showed an intriguing antioxidant capacity, achieving IC50 of 109.3 μg/ml μg/mL. Additionally, ZnONPs demonstrated low toxic effect on Vero cell with IC50 154.01 μg/mL as well as possible anticancer action when applied to the carcinoma cell lines HepG2 with IC50 of 47.48 μg/mL. Furthermore, ZnONPs at 62.5 μg/mL had a promising antiviral impact against HSV1 and COX B4, with antiviral activities of 75.4% and 65.8%, respectively.

MgO Nanoparticles as a Promising Photocatalyst towards Rhodamine B and Rhodamine 6G Degradation

The increasing global requirement for clean and safe drinking water has necessitated the development of efficient methods for the elimination of organic contaminants, especially dyes, from wastewater. This study reports the synthesis of magnesium oxide (MgO) nanoparticles via a simple precipitation approach and their thorough characterization using various techniques, including XRD, FT-IR, XPS, TGA, DLS, and FESEM. Synthesized MgO nanoparticles' photocatalytic effectiveness was evaluated towards rhodamine B and rhodamine 6G degradation under both UV and visible light irradiation. The results indicated that the MgO nanoparticles possess a face-centered cubic structure with enhanced crystallinity and purity, as well as an average crystallite size of approximately 3.20 nm. The nanoparticles demonstrated a significant BET surface area (52 m2/g) and a bandgap value equal to 5.27 eV. Photocatalytic experiments indicated complete degradation of rhodamine B dye under UV light within 180 min and 83.23% degradation under visible light. For rhodamine 6G, the degradation efficiency was 92.62% under UV light and 38.71% under visible light, thus verifying the MgO catalyst's selectivity towards degradation of rhodamine B dye. Also, reusability of MgO was investigated for five experimental photocatalytic trials with very promising results, mainly against rhodamine B. Scavenging experiments confirmed that •OH radicals were the major reactive oxygen species involved in the photodegradation procedure, unraveling the molecular mechanism of the photocatalytic efficiency of MgO.

Ecofriendly biosynthesis of copper nanoparticles from novel marine S. rhizophila species for enhanced antibiofilm, antimicrobial and antioxidant potential

Marine microorganisms offer a promising avenue for the eco-friendly synthesis of nanoparticles due to their unique biochemical capabilities and adaptability to various environments. This study focuses on exploring the potential of a marine bacterial species, Stenotrophomonas rhizophila BGNAK1, for the synthesis of biocompatible copper nanoparticles and their application for hindering biofilms formed by monomicrobial species. The study begins with the isolation of the novel marine S. rhizophila species from marine soil samples collected from the West coast region of Kerala, India. The isolated strain is identified through 16S rRNA gene sequencing and confirmed to be S. rhizophila species. Biosynthesis of copper nanoparticles using S. rhizophila results in the formation of nanoparticles with size of range 10-50 nm. The nanoparticles exhibit a face-centered cubic crystal structure of copper, as confirmed by X-Ray Diffraction analysis. Furthermore, the synthesized nanoparticles display significant antimicrobial activity against various pathogenic bacteria and yeast. The highest inhibitory activity was against Staphylococcus aureus with a zone of 27 ± 1.00 mm and the least activity was against Pseudomonas aeruginosa with a zone of 22 ± 0.50 mm. The zone of inhibition against Candida albicans was 16 ± 0.60 mm. The antibiofilm activity against biofilm-forming clinical pathogens was evidenced by the antibiofilm assay and SEM images. Additionally, the copper nanoparticles exhibit antioxidant activity, as evidenced by their scavenging ability against DPPH, hydroxyl, nitric oxide, and superoxide radicals, as well as their reducing power in the FRAP assay. The study highlights the potential of the marine bacterium S. rhizophila BGNAK1 for the eco-friendly biosynthesis of copper nanoparticles with diverse applications. Synthesized nanoparticles exhibit promising antibiofilm, antimicrobial, and antioxidant properties, suggesting their potential utility in various fields such as medicine, wastewater treatment, and environmental remediation.

Enhanced binding interaction and antibacterial inhibition for nanometal oxide particles activated with Aloe Vulgarize through one-pot ultrasonication techniques

The interaction of green zinc oxide nanoparticles (ZnO NPs) with bacterial strains are still scarcely reported. This work was conducted to study the green-one-pot-synthesized ZnO NPs from the Aloe Vulgarize (AV) leaf peel extract assisted with different sonication techniques followed by the physicochemical, biological activities and molecular docking studies. The NPs structure was analyzed using FTIR, UV-vis and EDX. The morphology, particle size and crystallinity of ZnO NPs were identified using FESEM and XRD. It was found that the formed flower-like structure with sharp edge and fine size of particulates in ZnO NPs/AV could enhance the bacterial inhibition. The minimum inhibitory concentration (MIC) for all the tested bacterial strains is at 3.125 µg/ml and the bacterial growth curve are dependent on the ZnO NPs dosage. The results of disc diffusion revealed that the ZnO NPs/AV possess better antibacterial effect with bigger ZOI due to the presence of AV active ingredient. The molecular docking between active ingredients of AV in the NPs with the protein of IFCM and 1MWU revealed that low binding energy (Ebind = -6.56 kcal/mol and -8.99 kcal/mol, respectively) attributes to the excessive hydrogen bond from AV that highly influenced their interaction with the amino acid of the selected proteins. Finally, the cytotoxicity test on the biosynthesized ZnO NPs with concentration below 20 µg/ml are found nontoxic on the HDF cell. Overall, ZnO NPs/20 % AV (probe sonication) is considered as the best synthesis option due to its efficient one-pot method, short sonication time but own the best antibacterial effect.

Impacting the Surface Chemistry of NiAu by Immobilizing on MgO/N-Rich Nanoporous Carbon Heterostructures for Boosting Catalytic Activities

Tuning the physical and chemical interaction between metal-metal' (M-M') and metal-support is an ideal way to realize enhanced catalytic activity of metal nanoparticles (NPs). As a proof of concept, herein we report the fabrication of nickel-gold (Ni-Au) alloy nanoparticles attached to N-doped nanoporous carbon (NPC) intervened with MgO (Ni73Au27@MgO-NPC), achieved through the impregnation of metal precursors into Schiff-base network polymer (SNP) framework along with Mg(OH)2 and pyrolysis at 800 °C in N2 atmosphere. With high stability and heterogeneity, the nickel rich Ni73Au27@MgO-NPC exhibited higher catalytic activities with turnover frequencies of 29,272 h-1 (hydrogenation of p-nitrophenol), 93,843 h-1 (degradation of methyl orange), and 2,218 h-1 (epoxidation of stilbene), compared to commercial 10 wt % Pd/C. Enhanced catalytic activity is correlated to the synchronized electron density enhancement in Au, by Ni and MgO/N-rich nanoporous carbon heterostructures, as evident from detailed X-ray photoelectron spectroscopic studies.

Phytochemical fabrication of ZnO nanoparticles and their antibacterial and anti-biofilm activity

The synthesis of metal nanoparticles through bio-reduction is environmentally benign and devoid of impurities, which is very important for biological applications. This method aims to improve ZnO nanoparticle's antibacterial and anti-biofilm activity while reducing the amount of hazardous chemicals used in nanoparticle production. The assembly of zinc oxide nanoparticles (ZnO NPs) is presented via bio-reduction of an aqueous zinc nitrate solution using Echinochloacolona (E. colona) plant aqueous leaf extract comprising various phytochemical components such as phenols, flavonoids, proteins, and sugars. The synthesized nano ZnO NPs are characterized by UV-visible spectrophotometer (UV-vis), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (X-RD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and elemental composition by energy-dispersive x-ray spectroscopy (EDX). The formation of biosynthesized ZnO nanoparticles was confirmed by the absorbance at 360-370 nm in the UV-vis spectrum. The average crystal size of the particles was found to be 15.8 nm, as calculated from XRD. SEM and TEM analysis of prepared ZnO NPs confirmed the spherical and hexagonal shaped nanoparticles. ZnO NPs showed antibacterial activity against Escherichia coli and Klebsiella pneumoniae with the largest zone of inhibition (ZOI) of 17 and 18 mm, respectively, from the disc diffusion method. Furthermore, ZnO NPs exhibited significant anti-biofilm activity in a dose-dependent manner against selected bacterial strains, thus suggesting that ZnO NPs can be deployed in the prevention of infectious diseases and also used in food preservation.

Electrochemically microplastic detection using chitosan-magnesium oxide nanosheet

Microplastics, an invisible threat, are emerging as serious pollutants that continuously affect health by interrupting/contaminating the human cycle, mainly involving food, water, and air. Such serious scenarios raised the demand for developing efficient sensing systems to detect them at an early stage efficiently and selectively. In this direction, the proposed research reports an electrochemical hexamethylenetetramine (HMT) sensing utilizing a sensing platform fabricated using chitosan-magnesium oxide nanosheets (CHIT-MgO NS) nanocomposite. HMT is considered as a hazardous microplastic, which is used as an additive in plastic manufacturers and has been selected as a target analyte. To fabricate sensing electrodes, a facile co-precipitation technique was employed to synthesize MgO NS, which was further mixed with 1% CHIT solution to form a CHIT_MgO NS composite. Such prepared nanocomposite solution was then drop casted to an indium tin oxide (ITO) to fabricate CHIT_MgO NS/ITO sensing electrode to detect HMT electrochemically using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. To determine the limit of detection (LOD) and sensitivity, DPV was performed. The resulting calibrated curve for HMT, ranging from 0.5 μM to 4.0 μM, exhibited a sensitivity of 12.908 μA (μM)-1 cm-2 with a detection limit of 0.03 μM and a limit of quantitation (LOQ) of 0.10 μM. Further, the CHIT_MgO NS/ITO modified electrode was applied to analyze HMT in various real samples, including river water, drain water, packaged water, and tertiary processed food. The results demonstrated the method's high sensitivity and suggested its potential applications in the field of microplastic surveillance, with a focus on health management.

One-Pot Biopreparation of Trimetallic ZnO–MgO–CuO Nanoparticles: Enhanced Cytotoxicity, Antibacterial Activities and Molecular Docking Studies

Nowadays, metal oxide nanoparticles (MO NPs) are powerful tools for biological applications due to their distinctive features. Moreover, the biological efficacy of multimetallic NPs is more fascinating because of their structural modifications and synergistic effects. This study utilized the one-pot green route to fabricate trimetallic ZnO-MgO-CuO (ZMC) NPs employing a greener reducing agent from Artemisiaabyssinica leaf extract (AALE). The crystal structure, size, compositions, shapes, and external topology of ZMC NPs were characterized by Fourier transform infrared (FTIR), UV–Visible (UV–vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and transmission electron microscopy combined with selected area electron diffraction (TEM/HRTEM-SAED). The outcomes suggested that the bio-prepared ZMC NPs are highly crystalline and have hexagonal structures lattice with monoclinic symmetry and spherical morphology with average crystalline and particle sizes of 14.67 and 15.13 nm, respectively. Using MTT assay, the bio-prepared ZMC NPs demonstrated high inhibition percentage (94.37 ± 0.14 at 250 mg/mL) with an IC50 value of 24.83 mg/mL for MCF-7 cell lines. The in-vitro antibacterial potential of ZMC NPs has been evaluated against four bacterial (Gram-positive and Gram-negative) strains and has demonstrated the highest inhibition zone (35 ± 0.03 mm) against the S. aureus strain and the lowest inhibition zone (31 ± 0.11) against the E. coli strain. Moreover, ZMC NPs have also shown strong molecular binding interactions with amino acids of estrogen receptor (ERα), S. aureus, and E. coli with binding energies of − 9.85, − 12.31, and − 6.04 kcal/mole, respectively.

Graphical Abstract

Plant-Assisted Green Synthesis of MgO Nanoparticles as a Sustainable Material for Bone Regeneration: Spectroscopic Properties

This work is devoted to magnesium oxide (MgO) nanoparticles (NPs) for their use as additives for bone implants. Extracts from four different widely used plants, including Aloe vera, Echeveria elegans, Sansevieria trifasciata, and Sedum morganianum, were evaluated for their ability to facilitate the "green synthesis" of MgO nanoparticles. The thermal stability and decomposition behavior of the MgONPs were analyzed by thermogravimetric analysis (TGA). Structure characterization was performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), and Raman scattering spectroscopy (RS). Morphology was studied by scanning electron microscopy (SEM). The photocatalytic activity of MgO nanoparticles was investigated based on the degradation of methyl orange (MeO) using UV-Vis spectroscopy. Surface-enhanced Raman scattering spectroscopy (SERS) was used to monitor the adsorption of L-phenylalanine (L-Phe) on the surface of MgONPs. The calculated enhancement factor (EF) is up to 102 orders of magnitude for MgO. This is the first work showing the SERS spectra of a chemical compound immobilized on the surface of MgO nanoparticles.

Gum Arabic assisted the biomass synthesis of bimetallic silver copper oxide nanoparticles using gamma-rays for improving bacterial and viral wound healing: Promising antimicrobial activity against foot and mouth disease

In this work, gamma irradiation was used to create bimetallic silver‑copper oxide nanoparticles (Ag-CuO NPs) in an ecologically acceptable way using gum Arabic (GA) polymer as a capping and reducing agent. Bimetallic Ag-CuO NPs were investigated through UV-Vis. spectroscopy, HR-TEM, SEM, DLS, and XRD examinations. The potency of antimicrobial and antibiofilm activities against a few bacterial isolates and Candida sp. had been investigated. Clinical investigations of 30 cows and 20 buffaloes from different sites in Egypt's Sharkia governorate found ulcerative lesions on the mouth and interdigital region. The cytotoxic assay of the generated NPs on BHK-21 was examined. The bimetallic Ag-CuO NPs had an average diameter of 25.58 nm, and the HR-TEM results showed that they were spherical. According to our results, Ag-CuO NPs exhibited the highest antibacterial efficacy against S. aureus (26.5 mm ZOI), K. pneumoniae (26.0 mm ZOI), and C. albicans (28.5 mm ZOI). The growth of biofilms was also successfully inhibited through the application of Ag-CuO NPs by 88.12 % against S. aureus, 87.08 % against C. albicans, and 74.0 % against B. subtilis. The ulcers on the mouth and foot of diseased animals healed in 4-5 days and 1 week, respectively, following topical application of bimetallic Ag-CuO NPs. The results examined the potential protective effects of a dosage of 3.57 μg/mL on cells before viral infection (cell control). According to our research, bimetallic Ag-CuO NPs limit the development of the virus that causes foot-and-mouth disease (FMD). The reduction of a specific FMD virus's cytopathic impact (CPE) on cell development represented the inhibitory effect when compared to identical circumstances without pretreatment with bimetallic Ag-CuO NPs. Their remarkable antibacterial properties at low concentration and continued-phase stability suggest that they may find widespread use in a variety of pharmacological and biological applications, especially in the wound-healing process.

Recent Advances in Low-Dimensional Metal Oxides via Sol-Gel Method for Gas Detection

Low-dimensional metal oxides have drawn significant attention across various scientific domains due to their multifaceted applications, particularly in the field of environment monitoring. Their popularity is attributed to a constellation of unique properties, including their high surface area, robust chemical stability, and remarkable electrical conductivity, among others, which allow them to be a good candidate for detecting CO, CO2, H2, NH3, NO2, CH4, H2S, and volatile organic compound gases. In recent years, the Sol-Gel method has emerged as a powerful and versatile technique for the controlled synthesis of low-dimensional metal oxide materials with diverse morphologies tailored for gas sensing applications. This review delves into the manifold facets of the Sol-Gel processing of metal oxides and reports their derived morphologies and remarkable gas-sensing properties. We comprehensively examine the synthesis conditions and critical parameters governing the formation of distinct morphologies, including nanoparticles, nanowires, nanorods, and hierarchical nanostructures. Furthermore, we provide insights into the fundamental principles underpinning the gas-sensing mechanisms of these materials. Notably, we assess the influence of morphology on gas-sensing performance, highlighting the pivotal role it plays in achieving exceptional sensitivity, selectivity, and response kinetics. Additionally, we highlight the impact of doping and composite formation on improving the sensitivity of pure metal oxides and reducing their operation temperature. A discussion of recent advances and emerging trends in the field is also presented, shedding light on the potential of Sol-Gel-derived nanostructures to revolutionize the landscape of gas sensing technologies.

Dual Functions of a Hybrid Magnetic Magnesium Oxide Nanocomposite as a Fungicide and Plant Growth Promoter in Agriculture Applications

The use of nanometal oxides in nanoagronomy has garnered considerable attention due to their excellent antifungal and plant growth promotion properties. Hybrid nanometal oxides, which combine the strengths of individual nanomaterials, have emerged as a promising class of materials. In this study, nanomagnesium oxide (n-MgO) and hybrid magnetic nanomagnesium oxide (m/n-MgO) were successfully synthesized via the ultrasound-mediated sol-gel method. Characterization results, including TGA, XRD, VSM, and FTIR, confirmed the successful synthesis of m/n-MgO. Both n-MgO and m/n-MgO underwent antifungal assays and plant growth promotion ability studies, benchmarked against the conventional fungicide-copper oxychloride. This study bridges a significant gap by simultaneously reporting the antifungal properties of both n-MgO and m/n-MgO and their impact on plant growth. The disc diffusion assay suggested that the antifungal activity of n-MgO and m/n-MgO against F. oxysporum was inversely related to the particle size. Notably, n-MgO exhibited superior antifungal performance (lower minimum inhibitory concentration (MIC)) and sustained efficacy compared with m/n-MgO, owing to distinct antifungal mechanisms. Nanorod-shaped MgO, with a smaller size (8.24 ± 5.61 nm) and higher aspect ratio, allowed them to penetrate the fungal cell wall and cause intercellular damage. In contrast, cubical m/n-MgO, with a larger size (20.95 ± 9.99 nm) and lower aspect ratio, accumulate on the fungal cell wall surface, disrupting the wall integrity, albeit less effectively against F. oxysporum. Moreover, in plant growth promotion studies, m/n-MgO-treated samples exhibited a 15.7% stronger promotion effect compared to n-MgO at their respective MICs. In addition, both n-MgO and m/n-MgO outperformed copper oxychloride in terms of antifungal and plant growth promoting activities. Thus, m/n-MgO presents a promising alternative to conventional copper-based fungicides, offering dual functionality as a fungicide and plant growth promoter, while the study also delves into the antifungal mechanisms at the intracellular level, enhancing its novelty.

Enhanced alpha-amylase inhibition activity of amine-terminated PAMAM dendrimer stabilized pure copper-doped magnesium oxide nanoparticles

The present work aims to prepare copper-doped MgO nanoparticles via a sol-gel approach and study their antidiabetic alpha-amylase inhibition activity with undoped MgO nanoparticles. The ability of G5 amine-terminated polyamidoamine (PAMAM) dendrimer for the controlled release of copper-doped MgO nanoparticles to exhibit alpha-amylase inhibition activity was also evaluated. The synthesis of MgO nanoparticles via sol-gel approach and optimization of calcination temperature and time has led to the formation of nanoparticles with different shapes (spherical, hexagonal, and rod-shaped) and a polydispersity in size ranging from 10 to 100 nm with periclase crystalline phase. The presence of copper ions in the MgO nanoparticles has altered their crystallite size, eventually modifying their size, morphology, and surface charge. The efficiency of dendrimer to stabilize spherical copper-doped MgO nanoparticles (ca. 30 %) is higher than in other samples, which was confirmed by UV-Visible, DLS, FTIR, and TEM analysis. The amylase inhibition assay emphasized that the dendrimer nanoparticles stabilization has led to the prolonged enzyme inhibition ability of MgO and copper-doped MgO nanoparticles for up to 24 h.

A State-of-the-Art Systemic Review on Selenium Nanoparticles: Mechanisms and Factors Influencing Biogenesis and Its Potential Applications

Selenium is a trace element required for the active function of numerous enzymes and various physiological processes. In recent years, selenium nanoparticles draw the attention of scientists and researchers because of its multifaceted uses. The process involved in chemically synthesized SeNPs has been found to be hazardous in nature, which has paved the way for safe and ecofriendly SeNPs to be developed in order to achieve sustainability. In comparison to chemical synthesis, SeNPs can be synthesized more safely and with greater flexibility utilizing bacteria, fungi, and plants. This review focused on the synthesis of SeNPs utilizing bacteria, fungi, and plants; the mechanisms involved in SeNP synthesis; and the effect of various abiotic factors on SeNP synthesis and morphological characteristics. This article discusses the synergies of SeNP synthesis via biological routes, which can help future researchers to synthesize SeNPs with more precision and employ them in desired fields.

Functionalization of Fluorine on the Surface of SnO2-Mg Nanocomposite as an Efficient Photocatalyst for Toxic Dye Degradation

This work reports on the photocatalytic activity of tin oxide (SnO2)-doped magnesium (Mg) and fluorine (F) nanoparticles for methyl orange and safranin dye degradation under sunlight irradiation. Nanocatalysis-induced dye degradation was examined using UV-visible spectroscopy and a pseudo-first-order kinetics model. The results indicate that the prepared nanoparticles exhibit superior photocatalytic activity, and the degradation of methyl orange (MO) dye is approximately 82%. In contrast, the degradation of safranin dye is 96% in the same time interval of 105 min. The calculated crystallite size of the SnO2-Mg-F nanocomposite is 29.5 nm, which respects the particle size found in the DLS analysis with a tetragonal structure and spherical morphology affirmed. The optical characteristics were assessed, and their respective bandgap energies were determined to be 3.6 eV. The influence of F in Mg and SnO2 is recognized with the XRD and FT-IR spectra of the prepared particles.

Gamma rays-assisted bacterial synthesis of bimetallic silver-selenium nanoparticles: powerful antimicrobial, antibiofilm, antioxidant, and photocatalytic activities

BACKGROUND

Bimetallic nanoparticles (BNPs) has drawn a lot of attention especially during the last couple of decades. A bimetallic nanoparticle stands for a combination of two different metals that exhibit several new and improved physicochemical properties. Therefore, the green synthesis and design of bimetallic nanoparticles is a field worth exploring.

METHODS

In this study, we present a green synthesis of silver nanoparticles (Ag NPs), selenium (Se) NPs, and bimetallic Ag-Se NPs using Gamma irradiation and utilizing a bacterial filtrate of Bacillus paramycoides. Different Techniques such as UV-Vis., XRD, DLS, SEM, EDX, and HR-TEM, were employed for identifying the synthesized NPs. The antimicrobial and antibiofilm activities of both the Ag/Se monometallic and bimetallic Ag-Se NPs were evaluated against some standard microbial strains including, Aspergillus brasiliensis ATCC16404, Candida albicans ATCC10231, Alternaria alternate EUM108, Fusarium oxysporum EUM37, Escherichia coli ATCC11229, Bacillus cereus ATCC15442, Klebsiella pneumoniae ATCC13883, Bacillus subtilis ATCC15442, and Pseudomonas aeruginosa ATCC6538 as a model tested pathogenic microbes. The individual free radical scavenging potentials of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs were determined using the DPPH radical scavenging assay. The degradation of methylene blue (MB) dye in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was used to assess their photocatalytic behavior.

RESULTS

According to the UV-Vis. spectrophotometer, the dose of 20.0 kGy that results in Ag NPs with the highest O.D. = 3.19 at 390 nm is the most effective dose. In a similar vein, the optimal dose for the synthesis of Se NPs was 15.0 kGy dose with O.D. = 1.74 at 460 nm. With a high O.D. of 2.79 at 395 nm, the most potent dose for the formation of bimetallic Ag-Se NPs is 15.0 kGy. The recorded MIC-values for Ag-Se NPs were 62.5 µg mL- 1, and the data clearly demonstrated that C. albicans was the organism that was most susceptible to the three types of NPs. The MIC value was 125 µg mL- 1 for both Ag NPs and Se NPs. In antibiofilm assay, 5 µg mL- 1 Ag-Se NPs inhibited C. albicans with a percentage of 90.88%, E. coli with a percentage of 90.70%, and S. aureus with a percentage of 90.62%. The synthesized NPs can be arranged as follows in decreasing order of antioxidant capacity as an antioxidant result: Ag-Se NPs > Se NPs > Ag NPs. The MB dye degradation in the presence of the synthesized Ag NPs, Se NPs, and bimetallic Ag-Se NPs was confirmed by the decrease in the measured absorbance (at 664 nm) after 20 min of exposure to sunlight.

CONCLUSION

Our study provides insight towards the synthesis of bimetallic NPs through green methodologies, to develop synergistic combinatorial antimicrobials with possible applications in the treatment of infectious diseases caused by clinically and industrial relevant drug-resistant strains.

Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities

Background

The green approaches for the synthesis of nanoparticles are gaining significant importance because of their high productivity, purity, low cost, biocompatibility, and environmental friendliness.

Methods

The aim of the current study is the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using seed extracts of Silybum marianum, which acts as a reducing and stabilizing agent. central composite design (CCD) of response surface methodology (RSM) optimized synthesis parameters (temperature, pH, reaction time, plant extract, and salt concentration) for controlled size, stability, and maximum yields of ZnO-NPs. Green synthesized ZnO-NPs was characterized using UV-visible spectroscopy and Zetasizer analyses.

Results

The Zetasizer confirmed that green synthesized ZnO-NPs were 51.80 nm in size and monodispersed in nature. The UV-visible results revealed a large band gap energy in the visible region at 360.5 nm wavelength. The bioactivities of green synthesized ZnO-NPs, including antifungal, antibacterial, and pesticidal, were also evaluated. Data analysis confirmed that these activities were concentration dependent. Bio-synthesized ZnO-NPs showed higher mortality towards Tribolium castaneum of about 78 ± 0.57% after 72 h observation as compared to Sitophilus oryzae, which only displayed 74 ± 0.57% at the same concentration and time intervals. Plant-mediated ZnO-NPs also showed high potential against pathogenic gram-positive bacteria (Clavibacter michiganensis), gram-negative bacteria (Pseudomonas syringae), and two fungal strains such as Fusarium oxysporum, and Aspergillums niger with inhibition zones of 18 ± 0.4, 25 ± 0.4, 21 ± 0.57, and 19 ± 0.4 mm, respectively.

Conclusion

The results of this study showed that Silybum marianum-based ZnO-NPs are cost-effective and efficient against crop pests.

Engineered Metal Oxide Nanoparticles as Fungicides for Plant Disease Control

Metal oxide nanoparticles are considered to be good alternatives as fungicides for plant disease control. To date, numerous metal oxide nanoparticles have been produced and evaluated as promising antifungal agents. Consequently, a detailed and critical review on the use of mono-, bi-, and tri-metal oxide nanoparticles for controlling phytopathogenic fungi is presented. Among the studied metal oxide nanoparticles, mono-metal oxide nanoparticles-particularly ZnO nanoparticles, followed by CuO nanoparticles -are the most investigated for controlling phytopathogenic fungi. Limited studies have investigated the use of bi- and tri-metal oxide nanoparticles for controlling phytopathogenic fungi. Therefore, more studies on these nanoparticles are required. Most of the evaluations have been carried out under in vitro conditions. Thus, it is necessary to develop more detailed studies under in vivo conditions. Interestingly, biological synthesis of nanoparticles has been established as a good alternative to produce metal oxide nanoparticles for controlling phytopathogenic fungi. Although there have been great advances in the use of metal oxide nanoparticles as novel antifungal agents for sustainable agriculture, there are still areas that require further improvement.

Magnesium Ortho-Vanadate/Magnesium Oxide/Graphene Oxide Embedded through Cellulose Acetate-Based Films for Wound Healing Applications

A multifunctional nano-films of cellulose acetate (CA)/magnesium ortho-vanadate (MOV)/magnesium oxide/graphene oxide wound coverage was fabricated. Through fabrication, different weights of the previously mentioned ingredients were selected to receive a certain morphological appearance. The composition was confirmed by XRD, FTIR, and EDX techniques. SEM micrograph of Mg₃(VO₄)₂/MgO/GO@CA film depicted that there was a porous surface with flattened rounded MgO grains with an average size of 0.31 µm was observed. Regarding wettability, the binary composition of Mg₃(VO₄)₂@CA occupied the lowest contact angle of 30.15 ± 0.8^o, while pure CA represents the highest one at 47.35 ± 0.4°. The cell viability % amongst the usage of 4.9 µg/mL of Mg₃(VO₄)₂/MgO/GO@CA is 95.77 ± 3.2%, while 2.4 µg/mL showed 101.54 ± 2.9%. The higher concentration of 5000 µg/mL exhibited a viability of 19.23%. According to optical results, the refractive index jumped from 1.73 for CA to 1.81 for Mg₃(VO₄)₂/MgO/GO@CA film. The thermogravimetric analysis showed three main stages of degradation. The initial temperature started from room temperature to 289 °C with a weight loss of 13%. On the other hand, the second stage started from the final temperature of the first stage and end at 375 °C with a weight loss of 52%. Finally, the last stage was from 375 to 472 °C with 19% weight loss. The obtained results, such as high hydrophilic behavior, high cell viability, surface roughness, and porosity due to the addition of nanoparticles to the CA membrane, all played a significant role in enhancing the biocompatibility and biological activity of the CA membrane. The enhancements in the CA membrane suggest that it can be utilized in drug delivery and wound healing applications.

Hydrothermally synthesized Ag-TiO2 nanofibers (NFs) for photocatalytic dye degradation and antibacterial activity

This work successfully utilised eco-friendly green synthesis to produce Ag-TiO₂ nanofibers (NFs). As pollution and energy limitations have become global issues, there is an ongoing need to develop more effective catalysts through straightforward and environmentally friendly methods. The Ag-TiO₂ nanofibers (NFs) XRD pattern exhibits an anatase TiO₂ and FCC crystal structure of Ag nanoparticles. The SEM investigation revealed a nanofiber-like surface morphology. The Ag-TiO₂ nanofibers (NFs) exhibits an optical band gap energy is 2.5 eV. Methylene blue (MB), malachite green (MG), Congo red (CR), and crystal violet (CV) dye aqueous solutions were used to evaluate the photocatalytic performance of the synthesized Ag-modified TiO₂ nanofibers (NFs) under direct sunlight irradiation. The effects of catalyst size on the efficient breakdown of MB dye were also investigated. The optimum catalyst concentration was found to be at 0.02 mg/mL. At 120 min of direct sunlight, the highest photosynthetic degradation efficiency (DE percentage) of 94% was achieved for MB dye. Ag-TiO₂ nanofibers (NFs) have been demonstrated to have exceptional antibacterial activity against Gram-positive bacteria such as Staphylococcus aureus and Gram-negative bacteria E-Coli. Because of these great qualities, it seems likely that the Ag-TiO₂ nanofibers (NFs) made could be a great photocatalyst for getting dye pollutants out of wastewater.

An atmospheric microwave plasma-based distributed system for medical waste treatment

Inadequate handling of infectious medical waste may promote the spread of the virus through secondary transmission during the transfer process. Microwave plasma, an ease-of-use, device-compact, and pollution-free technology, enables the on-site disposal of medical waste, thereby preventing secondary transmission. We developed atmospheric-pressure air-based microwave plasma torches with lengths exceeding 30 cm to rapidly treat various medical wastes in situ with nonhazardous exhaust gas. The gas compositions and temperatures throughout the medical waste treatment process were monitored by gas analyzers and thermocouples in real time. The main organic elements in medical waste and their residues were analyzed by an organic elemental analyzer. The results showed that (i) the weight reduction ratio of medical waste achieved a maximum value of 94%; (ii) a water-waste ratio of 30% was beneficial for enhancing the microwave plasma treatment effect for medical wastes; and (iii) substantial treatment effectiveness was achievable under a high feeding temperature (≥ 600 °C) and a high gas flow rate (≥ 40 L/min). Based on these results, we built a miniaturized and distributed pilot prototype for microwave plasma torch-based on-site medical waste treatment. This innovation could fill the gap in the field of small-scale medical waste treatment facilities and alleviate the existing issue of handling medical waste on-site.

Polydimethylsiloxane/Magnesium Oxide Nanosheet Mixed Matrix Membrane for CO2 Separation Application

Carbon dioxide (CO₂) concentration is now 50% higher than in the preindustrial period and efforts to reduce CO₂ emission through carbon capture and utilization (CCU) are blooming. Membranes are one of the attractive alternatives for such application. In this study, a rubbery polymer polydimethylsiloxane (PDMS) membrane is incorporated with magnesium oxide (MgO) with a hierarchically two-dimensional (2D) nanosheet shape for CO₂ separation. The average thickness of the synthesized MgO nanosheet in this study is 35.3 ± 1.5 nm. Based on the pure gas separation performance, the optimal loading obtained is at 1 wt.% where there is no observable significant agglomeration. CO₂ permeability was reduced from 2382 Barrer to 1929 Barrer while CO₂/N₂ selectivity increased from only 11.4 to 12.7, and CO₂/CH₄ remained relatively constant when the MMM was operated at 2 bar and 25 °C. Sedimentation of the filler was observed when the loading was further increased to 5 wt.%, forming interfacial defects on the bottom side of the membrane and causing increased CO₂ gas permeability from 1929 Barrer to 2104 Barrer as compared to filler loading at 1 wt.%, whereas the CO₂/N₂ ideal selectivity increased from 12.1 to 15.0. Additionally, this study shows that there was no significant impact of pressure on separation performance. There was a linear decline of CO₂ permeability with increasing upstream pressure while there were no changes to the CO₂/N₂ and CO₂/CH₄ selectivity.

Advanced Hydrogels Combined with Silver and Gold Nanoparticles against Antimicrobial Resistance

The development of multidrug-resistant (MDR) microorganisms has increased dramatically in the last decade as a natural consequence of the misuse and overuse of antimicrobials. The World Health Organization (WHO) recognizes that this is one of the top ten global public health threats facing humanity today, demanding urgent multisectoral action. The UK government foresees that bacterial antimicrobial resistance (AMR) could kill 10 million people per year by 2050 worldwide. In this sense, metallic nanoparticles (NPs) have emerged as promising alternatives due to their outstanding antibacterial and antibiofilm properties. The efficient delivery of the NPs is also a matter of concern, and recent studies have demonstrated that hydrogels present an excellent ability to perform this task. The porous hydrogel structure with a high-water retention capability is a convenient host for the incorporation of the metallic nanoparticles, providing an efficient path to deliver the NPs properly reducing bacterial infections caused by MDR pathogenic microorganisms. This article reviews the most recent investigations on the characteristics, applications, advantages, and limitations of hydrogels combined with metallic NPs for treating MDR bacteria. The mechanisms of action and the antibiofilm activity of the NPs incorporated into hydrogels are also described. Finally, this contribution intends to fill some gaps in nanomedicine and serve as a guide for the development of advanced medical products.

Green synthesis of MgO nanoparticles and its antibacterial properties

Magnesium oxide nanostructured particles (NP) were prepared using a simple solution combustion technique using different leaf extracts such as Mangifera indica (Mango - Ma), Azadirachta indica (Neem-Ne), and Carica papaya (Papaya-Pa) as surfactants. The highly crystalline phase of MgO nanostructures was confirmed by PXRD and FTIR studies for 2 h 500°C calcined samples. To analyze the characteristics of obtained material-MaNP, NeNP, and PaNP for dosimetry applications, thermoluminescence (TL) studies were carried out for Co-60 gamma rays irradiated samples in the dose range 10-50 KGy; PaNP and NeNP exhibited well-defined glow curve when compared with MaNP samples. In addition, it was observed that the TL intensity decreases, with increase in gamma dose and the glow peak temperature is shifted towards the higher temperature with the increase in heating rate. The glow peak was segregated using glow curve deconvolution and thermal cleaning method. Kinetic parameters estimated using Chen's method, trap depth (E), and frequency factor (s) were found to be 0.699, 7.408, 0.4929, and 38.71, 11.008, and 10.71 for PaNP, NeNP, and MaNP respectively. The well-resolved glow curve, good linear behavior in the dose range of 10-50, KGy, and less fading were observed in PaNP as compared with MaNP and NeNP. Further, the antibacterial activity was checked against human pathogens such as Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. A visible zone of clearance was observed at 200 and 100 μg/mL by the PaNP and NeNP, indicating the death of colonies by the nanoparticles. Therefore, PaNP nanomaterial is a potential phosphor material for dosimetry and antibacterial application compared to NeNP and MaNP.

Ultrasound-assisted fabrication of biopolymer materials: A review

There is an urgent need to develop technologies that can physically manipulate the structure of biocompatible and green polymer materials in order to tune their performance in an efficient, repeatable, easy-to-operate, chemical-free, non-contact, and highly controllable manner. Ultrasound technology produces a cavitation effect that promotes the generation of free radicals, the fracture of chemical chain segments and a rapid change of morphology. The cavitation effects are accompanied by thermal, chemical, and biological effects that interact with the material being studied. With its high efficiency, cleanliness, and reusability applications, ultrasound has a vast range of opportunity within the field of natural polymer-based materials. This work expounds the basic principle of ultrasonic cavitation and analyzes the influence that ultrasonic strength, temperature, frequency and induced liquid surface tension on the physical and chemical properties of biopolymer materials. The mechanism and the influence that ultrasonic modification has on materials is discussed, with highlighted details on the agglomeration, degradation, morphology, structure, and the mechanical properties of these novel materials from naturally derived polymers.

Probing the effect of Ni, Co and Fe doping concentrations on the antibacterial behaviors of MgO nanoparticles

The divalent transition metal ions (Ni, Co, and Fe)-doped MgO nanoparticles were synthesized via the sol–gel method. X-ray diffraction showed the MgO pure, single cubic phase of samples at 600 °C. Field emission electron microscope showed the uniform spherical shape of samples. The magnetic behavior of Ni, Co, Fe-doped MgO system were varied with Ni, Co, Fe content (0.00, 0.01, 0.03, 0.05, 0.07). The magnetic nature of pure had changed from paramagnetic to ferromagnetic. The number of oxygen vacancies increases with increasing amounts of dopant ions that lead to an ionic charge imbalance between Ni²⁺/Co²⁺/Fe²⁺ and Mg²⁺, leading to increase magnetic properties of the samples. The magnetic nature of prepared samples makes them suitable for biomedical applications. A comparative study of the antibacterial activity of nanoparticles against the Gram-negative (E. coli) and Gram-positive bacteria (S. aureus) was performed by disc diffusion, pour plate techniques, and study surface morphology of untreated and treated bacterial cell wall. An investigation of the antibacterial activity of doped MgO nanoparticles reveals that the doped MgO nanoparticles show effective antibacterial activity against the Gram-negative (E. coli) and Gram-positive (S. aureus) bacterium. The minimum inhibitory concentration of the synthesized nanoparticles against microorganisms was recorded with 40 μg/ml, while the maximum inhibitory concentration was observed with 80 μg/ml. At a concentration of 80 μg/ml, the complete growth inhibition of the E. coli was achieved with 7% Co-doped MgO and 7% Fe-doped MgO, while bacterial growth of S. aureus was inhibited by 100% in the presence of 7% Fe-doped MgO. The present work is promising for using nanomaterials as a novel antibiotic instead of the conventional antibiotics for the treatment of infectious diseases which are caused by tested bacteria.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

A High Thermal Conductivity of MgO-H2O Nanofluid Prepared by Two-Step Technique

In this paper, the main goal is to study the impact of nanopowder volume concentration and ultrasonication treatment time on the stability and thermophysical properties of MgO-DW nanofluid at room temperature. The co-precipitation method was utilized to prepare pure MgO nanoparticles with an average particle size of 33 nm. The prepared MgO nanopowder was characterized by using XRD, SEM, and EDX analyses. Then, MgO-DW nanofluid was obtained with different volume concentrations (i.e., 0.05, 0.1, 0.15, 0.2, and 0.25 vol.%) and different ultrasonication time periods (i.e., 45, 90, 135, and 180 min) by using a novel two-step technique. With volume concentration and ultrasonication time of 0.15 vol.% and 180 min, respectively, good stability was achieved, according to the zeta potential analysis. With increasing volume concentration and ultrasonication time period of the nanofluid samples, the thermal conductivity measurements showed significant increases. As a result, the maximum enhancement was found to be 25.08% at a concentration ratio of 0.25 vol.% and agitation time of 180 min. Dynamic viscosity measurements revealed two contrasting trends with volume concentration and ultrasonication time. The lowest value of relative viscosity was gained by 0.05 vol.% MgO-DW nanofluid. The chemical and physical interactions between MgO nanoparticles and DW molecules play an important function in determining the thermal conductivity and dynamic viscosity of MgO-DW nanofluid. These findings exhibit that MgO-DW nanofluid has the potential to be used as an advanced heat transfer fluid in cooling systems and heat exchangers.

Enhanced Antimicrobial, Cytotoxicity, Larvicidal, and Repellence Activities of Brown Algae, Cystoseira crinita-Mediated Green Synthesis of Magnesium Oxide Nanoparticles

Herein, the metabolites secreted by brown algae, Cystoseira crinita, were used as biocatalyst for green synthesis of magnesium oxide nanoparticles (MgO-NPs). The fabricated MgO-NPs were characterized using UV-vis spectroscopy, Fourier transforms infrared spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy linked with energy-dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Data showed successful formation of crystallographic and spherical MgO-NPs with sizes of 3-18 nm at a maximum surface plasmon resonance of 320 nm. Moreover, EDX analysis confirms the presence of Mg and O in the sample with weight percentages of 54.1% and 20.6%, respectively. Phyco-fabricated MgO-NPs showed promising activities against Gram-positive bacteria, Gram-negative bacteria, and Candida albicans with MIC values ranging between 12.5 and 50 μg mL-1. The IC50 value of MgO-NPs against cancer cell lines (Caco-2) was 113.4 μg mL-1, whereas it was 141.2 μg mL-1 for normal cell lines (Vero cell). Interestingly, the green synthesized MgO-NPs exhibited significant larvicidal and pupicidal activity against Musca domestica. At 10 μg mL-1 MgO-NPs, the highest mortality percentages were 99.0%, 95.0%, 92.2%, and 81.0% for I, II, III instars' larvae, and pupa of M. domestica, respectively, with LC50 values (3.08, 3.49, and 4.46 μg mL-1), and LC90 values (7.46, 8.89, and 10.43 μg mL-1), respectively. Also, MgO-NPs showed repellence activity for adults of M. domestica at 10 μg mL-1 with 63.0%, 77.9%, 84.9%, and 96.8% after 12, 24, 48, and 72 h, respectively.

PVP/Highly Dispersed AgNPs Nanofibers Using Ultrasonic-Assisted Electrospinning

Silver nanoparticles (AgNPs) are novel materials with antibacterial, antifungal, and antiviral activities over a wide range. This study aimed to prepare polyvinylpyrrolidone (PVP) electrospinning composites with uniformly distributed AgNPs. In this study, starch-capped ~2 nm primary AgNPs were first synthesized using Atmospheric pressure Pulsed Discharge Plasma (APDP) at AC 10 kV and 10 kHz. Then, 0.6 wt.% AgNPs were mixed into a 10 wt.% PVP ethanol-based polymer solution and coiled through an Ultrasonic-assisted Electrospinning device (US-ES) with a 50 W and 50 kHz ultrasonic generator. At 12 kV and a distance of 10 cm, this work successfully fabricated AgNPs-PVP electrospun fibers. The electrospun products were characterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), High-Resolution TEM (HR-TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Thermogravimetric (TG), and X-ray Photoelectron Spectroscopy (XPS) methods.

Green synthesis of silver nanoparticles using sodium alginate and tannic acid: characterization and anti-S. aureus activity

Multi-drug resistance and biofilm formation are a growing problem in the treatment of Staphylococcus aureus contamination. Advances in nanotechnology allow the synthesis of metal nanoparticles that can be assembled into complex architectures for controlling bacterial growth. This study aims to investigate the ultrasonic-assisted green synthesis of silver nanoparticles (AgNPs) by tannic acid (TA) and sodium alginate (Na-Alg) as the reducing and stabilizing agents, respectively, and evaluation of their antibacterial and antibiofilm activities. The UV-Vis spectroscopy and transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), zetasizer, FT-IR spectroscopy, and X-ray diffraction (XRD) studies showed that the optimum produces were spherical, stable, and monodispersed AgNPs with an average size of particle sizes of 18.52 ± 0.07 nm. The antibacterial and antibiofilm activities of the AgNPs loaded TA/Na-Alg constructs against S. aureus ATCC 6538 were investigated. The minimum inhibitory concentration (MIC) of the AgNPs was 31.25 μg/mL. After exposure to the AgNPs, planktonic S. aureus showed irreversible cell membrane damage, decreased cell viability, and changes in cellular morphology. In addition, the AgNps significantly inhibited S. aureus biofilm formation at 1/32 MIC. The biofilm elimination rate was 58.87% after exposure to MIC AgNPs. The results suggested that the development of AgNPs loaded TA/Na-Alg constructs with biomedical potentialities obtained through a simple, green, and cost-effective approach, may be suitable for the formulation of a new strategy for combating S. aureus.

Nanotechnology in combating biofilm: A smart and promising therapeutic strategy

Since the birth of civilization, people have recognized that infectious microbes cause serious and often fatal diseases in humans. One of the most dangerous characteristics of microorganisms is their propensity to form biofilms. It is linked to the development of long-lasting infections and more severe illness. An obstacle to eliminating such intricate structures is their resistance to the drugs now utilized in clinical practice (biofilms). Finding new compounds with anti-biofilm effect is, thus, essential. Infections caused by bacterial biofilms are something that nanotechnology has lately shown promise in treating. More and more studies are being conducted to determine whether nanoparticles (NPs) are useful in the fight against bacterial infections. While there have been a small number of clinical trials, there have been several in vitro outcomes examining the effects of antimicrobial NPs. Nanotechnology provides secure delivery platforms for targeted treatments to combat the wide range of microbial infections caused by biofilms. The increase in pharmaceuticals' bioactive potential is one of the many ways in which nanotechnology has been applied to drug delivery. The current research details the utilization of several nanoparticles in the targeted medication delivery strategy for managing microbial biofilms, including metal and metal oxide nanoparticles, liposomes, micro-, and nanoemulsions, solid lipid nanoparticles, and polymeric nanoparticles. Our understanding of how these nanosystems aid in the fight against biofilms has been expanded through their use.

Ultrasound regulated flexible protein materials: Fabrication, structure and physical-biological properties

Ultrasound can be used in the biomaterial field due to its high efficiency, easy operation, no chemical treatment, repeatability and high level of control. In this work, we demonstrated that ultrasound is able to quickly regulate protein structure at the solution assembly stage to obtain the designed properties of protein-based materials. Silk fibroin proteins dissolved in a formic acid-CaCl2 solution system were treated in an ultrasound with varying times and powers. By altering these variables, the silks physical properties and structures can be fine-tuned and the results were investigated with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), gas permeability and water contact angle measurements. Ultrasonic treatment aids the interactions between the calcium ions and silk molecular chains which leads to increased amounts of intermolecular β-sheets and α-helix. This unique structural change caused the silk film to be highly insoluble in water while also inducing a hydrophilic swelling property. The ultrasound-regulated silk materials also showed higher thermal stability, better biocompatibility and breathability, and favorable mechanical strength and flexibility. It was also possible to tune the enzymatic degradation rate and biological response (cell growth and proliferation) of protein materials by changing ultrasound parameters. This study provides a unique physical and non-contact material processing method for the wide applications of protein-based biomaterials.

Influence of Ce3+ Substitution on Antimicrobial and Antibiofilm Properties of ZnCexFe2-xO4 Nanoparticles (X = 0.0, 0.02, 0.04, 0.06, and 0.08) Conjugated with Ebselen and Its Role Subsidised with γ-Radiation in Mitigating Human TNBC and Colorectal Adenocarcinoma Proliferation In Vitro

Cancers are a major challenge to health worldwide. Spinel ferrites have attracted attention due to their broad theranostic applications. This study aimed at investigating the antimicrobial, antibiofilm, and anticancer activities of ebselen (Eb) and cerium-nanoparticles (Ce-NPs) in the form of ZnCexFe2-XO4 on human breast and colon cancer cell lines. Bioassays of the cytotoxic concentrations of Eb and ZnCexFe2-XO4, oxidative stress and inflammatory milieu, autophagy, apoptosis, related signalling effectors, the distribution of cells through the cell-cycle phases, and the percentage of cells with apoptosis were evaluated in cancer cell lines. Additionally, the antimicrobial and antibiofilm potential have been investigated against different pathogenic microbes. The ZOI, and MIC results indicated that ZnCexFe2-XO4; X = 0.06 specimen reduced the activity of a wide range of bacteria and unicellular fungi at low concentration including P. aeruginosa (9.5 mm; 6.250 µg/mL), S. aureus (13.2 mm; 0.390 µg/mL), and Candida albicans (13.5 mm; 0.195 µg/mL). Reaction mechanism determination indicated that after ZnCexFe2-xO4; X = 0.06 treatment, morphological differences in S.aureus were apparent with complete lysis of bacterial cells, a concomitant decrease in the viable number, and the growth of biofilm was inhibited. The combination of Eb with ZFO or ZnCexFe2-XO4 with γ-radiation exposure showed marked anti-proliferative efficacy in both cell lines, through modulating the oxidant/antioxidant machinery imbalance, restoring the fine-tuning of redox status, and promoting an anti-inflammatory milieu to prevent cancer progression, which may be a valuable therapeutic approach to cancer therapy and as a promising antimicrobial agent to reduce the pathogenic potential of the invading microbes.

Engineered nanomaterials as fighters against SARS-CoV-2: The way to control and treat pandemics

In this editorial trend, we aim to collect and present recently available data about the characteristics of SARS-CoV-2 virus, severity, infection, replication, diagnosis, and current medications. In addition, we propose the role of nanomaterials in controlling and treating COVID-19 through their antiviral and antibacterial potential with suggested action mechanisms indicating the capability of interaction between these nanomaterials and SARS-CoV-2. These nanomaterials might be among the possible and most effective cures against coronavirus.

The Catalytic Activity of Biosynthesized Magnesium Oxide Nanoparticles (MgO-NPs) for Inhibiting the Growth of Pathogenic Microbes, Tanning Effluent Treatment, and Chromium Ion Removal

Magnesium oxide nanoparticles (MgO-NPs) were synthesized using the fungal strain Aspergillus terreus S1 to overcome the disadvantages of chemical and physical methods. The factors affecting the biosynthesis process were optimized as follows: concentration of Mg(NO3)2·6H2O precursor (3 mM), contact time (36 min), pH (8), and incubation temperature (35 °C). The characterization of biosynthesized MgO-NPs was accomplished using UV-vis spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy—energy dispersive X-ray (SEM-EDX), X-ray diffraction (XRD), and dynamic light scattering (DLS). Data confirmed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with a size range of 8.0–38.0 nm at a maximum surface plasmon resonance of 280 nm. The biological activities of biosynthesized MgO-NPs including antimicrobial activity, biotreatment of tanning effluent, and chromium ion removal were investigated. The highest growth inhibition of pathogenic Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans was achieved at 200 μg mL–1 of MgO-NPs. The biosynthesized MgO-NPs exhibited high efficacy to decolorize the tanning effluent (96.8 ± 1.7% after 150 min at 1.0 µg mL–1) and greatly decrease chemical parameters including total suspended solids (TSS), total dissolved solids (TDS), biological oxygen demand (BOD), chemical oxygen demand (COD), and conductivity with percentages of 98.04, 98.3, 89.1, 97.2, and 97.7%, respectively. Further, the biosynthesized MgO-NPs showed a strong potential to remove chromium ions from the tanning effluent, from 835.3 mg L–1 to 21.0 mg L–1, with a removal percentage of 97.5%.

Eco-friendly Mycogenic Synthesis of ZnO and CuO Nanoparticles for In Vitro Antibacterial, Antibiofilm, and Antifungal Applications

Mycogenic synthesis of medically applied zinc oxide (ZnO) and copper oxide (CuO) nanoparticles (NPs) were exploited using Penicillium chrysogenum. The biogenesis and capping processes of the produced nano-metals were conducted by functional fungal extracellular enzymes and proteins. The obtained ZnO-NPs and CuO-NPs were characterized. Also, the antibacterial activity and minimum inhibitory concentration (MIC) values of ZnO-NPs and CuO-NPs were determined. Also, antibiofilm and antifungal activities were investigated. Results have demonstrated the ability of the bio-secreted proteins to cape and reduce ZnO and CuO to hexagonal and spherical ZnO-NPs and CuO-NPs with particle size at 9.0-35.0 nm and 10.5-59.7 nm, respectively. Both ZnO-NPs and CuO-NPs showed high antimicrobial activities not only against Gram-positive and Gram-negative bacteria but also against some phytopathogenic fungal strains. Besides this, those NPs showed varied antibiofilm effects against different microorganisms. Quantitative and qualitative analyses indicated that CuO-NPs had an effective antibiofilm activity against Staphylococcus aureus and therefore can be applied in diverse medical devices. Thus, the mycogenic green synthesized ZnO-NPs and CuO-NPs have the potential as smart nano-materials to be used in the medical field to limit the spread of some pathogenic microbes.

The potential impact of Octopus cyanea extracts to improve eggplant resistance against Fusarium-wilt disease: in vivo and in vitro studies

The novelty of the present research is conducting a new method in the systemic resistance of plant diseases by using distinct marine extracts. The ability of two octopus extracts to reduce the wilt disease caused by Fusarium oxysporum was observed. The applied methods are soaked roots (SR) and foliar shoots (FS). The antioxidant enzyme activities, percent disease index (PDI), and growth parameters were measured. In vitro antifungal potential of the octopus extracts against F. oxysporum was examined. The obtained result shows that SR extracts reduced PDI. Additionally, all the tested treatments promoted the growth and photosynthetic pigments of the infected plants. SR (in ethanolic extracts) was the most prominent inducer which offered a high advancement in the total soluble protein contents. Also, SR (in methanolic extracts) was the most suitable inducer which provided a very necessary development not only in the total phenol but also in the peroxidase (POD) and polyphenol oxidase (PPO) activities. GC-MS investigation of the octopus extracts exhibited that the compounds which possess antifungal activity were furoscrobiculin B and/or eugenol. They demonstrated a notable antifungal potential against F. oxysporum with a maximum activity of 38.5 and 12.7 mm ZOI after the treatment with the ethanolic and methanolic extract, respectively. FTIR results illustrated the functional group of the compound responsible for the antifungal activity. Additionally, an atomic absorption result reveals that there are traces of metals detected such as Pb, Ag, Cu, Zn, and Mg. The antifungal activity was decreased as the concentrations were reduced. Accordingly, the present extracts may be used as the vital agents in the agricultural field to restrain the plant pathogenic fungi, especially F. oxysporum from a proliferation.

Bio-Catalytic Activity of Novel Mentha arvensis Intervened Biocompatible Magnesium Oxide Nanomaterials

In the present study Mentha arvensis medaited Magnesium oxide nanoparticles were synthesized by novel green route followed by advanced characterization via XRD, FTIR, UV, SEM, TEM, DLS and TGA. The mean grain size of 32.4 nm and crystallite fcc morphology were confirmed by X-ray diffractive analysis. Scanning and Transmission electron microscopy analysis revealed the spherical and elliptical morphologies of the biosynthesized nanoparticles. Particle surface charge of −16.1 mV were determined by zeta potential and zeta size of 30–120 nm via dynamic light scattering method. Fourier transform spectroscopic analysis revealed the possible involvement of functional groups in the plant extract in reduction of Mg2+ ions to Mg0. Furthermore, the antioxidant, anti-Alzheimer, anti-cancer, and anti-H. pylori activities were performed. The results revealed that MgO-NPs has significant anti-H. pyloric potential by giving ZOI of 17.19 ± 0.83 mm against Helicobacter felis followed by Helicobacter suis. MgO-NPs inhibited protein kinase enzyme up to 12.44 ± 0.72% at 5 mg/mL and thus showed eminent anticancer activity. Significant free radicals scavenging and hemocompatability was also shown by MgO-NPs. MgO-NPs also displayed good inhibition potential against Hela cell lines with maximum inhibition of 49.49 ± 1.18 at 400 µg/mL. Owing to ecofriendly synthesis, non-toxic and biocompatible nature, Mentha arvensis synthesized MgO-NPs can be used as potent antimicrobial agent in therapeutic applications.

-2

Various nanoparticles have been developed for bio-applications. However, nanocomposites particles, (NCPs) with effective and ability to sensing cholesterol, are still needed. Herein, we present new cholesterol and pH-responsive NCPs as sensor particles to promote sensitivity. The traditional method of mixing and grinding was used to fabricate the oxides of magnesium and manganese MgO-MnO2 NCPs with different mixing ratios. Structural properties, detection of cholesterol, and pH sensitivity were examined. Results propped the high efficiency of MgO-MnO2 NCPs compared with individual oxides (MgO and MnO2), low response time, while the analytical results confirmed the homogeneous structure of MgO-MnO2 NCPs. Particle size distribution results for NCPs were within 16.4 to 100 nm, which makes it promising in medical and bio-applications.