Structure and microbial diversity of biofilms on different pipe materials of a model drinking water distribution systems

Catharanthus roseus-mediated CuAl2O4 nanocomposites for evaluation of killing kinetics

The present article portrayed on the killing kinetic of human pathogenic bacteria using bioinspired mesoporous CuAl2O4 nanocomposites (NCs). The NCs was fabricated using leaf extract of medicinal plant Catharanthus roseus (CR) as a green reducer and stabilizer. As bio-fabricated material was calcined at 800 °C and characterized by several analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-DRS), Energy Dispersive X-Ray Spectroscopy (EDS), X-Ray Photoelectron Spectroscopy (XPS), Raman, Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) to authenticate its structure, phase, chemical bonding, chemical state, size and morphology behaviors. XRD and TEM revealed a reduced crystallite and nanoscale sizes of biosynthesized NCs. Moreover, XRD study exposed a cubic-structure of material, while transmission electron microscopy rendered an average particles size in range 10-15 nm. However, BET profile advocates a mesoporous nature of the particles. An effective biological molecular docking modulation assessed by substituting natural inhibitor by bioinspired NCs, while the protein PDB ID 4Z8D FabH as a receptor site for the present investigation. After assessment of molecular docking examination, the antibacterial activity of bioinspired NCs were performed against Staphylococcus aureus, Bacillus subtillis, Klebsiella pneumoniae and Escherichia coli using agar-well method. The broth culture method was employed on different pathogenic strains by kinetic growth assays and colony forming unit.

Marine plastisphere selectively enriches microbial assemblages and antibiotic resistance genes during long-term cultivation periods

Several studies have focused on identifying and quantifying suspended plastics in surface and subsurface seawater. Microplastics (MPs) have attracted attention as carriers of antibiotic resistance genes (ARGs) in the marine environment. Plastispheres, specific biofilms on MP, can provide an ideal niche to spread more widely through horizontal gene transfer (HGT), thereby increasing risks to ecosystems and human health. However, the microbial communities formed on different plastic types and ARG abundances during exposure time in natural marine environments remain unclear. Four types of commonly used MPs (polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)) were periodically cultured (46, 63, and 102 d) in a field-based marine environment to study the co-selection of ARGs and microbial communities in marine plastispheres. After the first 63 d of incubation (p < 0.05), the initial 16S rRNA gene abundance of microorganisms in the plastisphere increased significantly, and the biomass subsequently decreased. These results suggest that MPs can serve as vehicles for various microorganisms to travel to different environments and eventually provide a niche for a variety of microorganisms. Additionally, the qPCR results showed that MPs selectively enriched ARGs. In particular, tetA, tetQ, sul1, and qnrS were selectively enriched in the PVC-MPs. The abundances of intl1, a mobile genetic element, was measured in all MP types for 46 d (5.22 × 10-5 ± 8.21 × 10-6 copies/16s rRNA gene copies), 63 d (5.90 × 10-5 ± 2.49 × 10-6 copies/16s rRNA gene copies), and 102 d (4.00 × 10-5 ± 5.11 × 10-6 copies/16s rRNA gene copies). Network analysis indicated that ARG profiles co-occurred with key biofilm-forming bacteria. This study suggests that the selection of ARGs and their co-occurring bacteria in MPs could potentially accelerate their transmission through HGT in natural marine plastics.

Comparison of Legionella pneumophila and Pseudomonas fluorescens Quantification Methods for Assessing UV LED Disinfection

This study assesses the efficacy of ultraviolet light-emitting diodes (UV LEDs) for deactivating Legionella pneumophila (pure culture) and Pseudomonas fluorescens (pure culture and biofilms) on relevant drinking water distribution system surfaces (cast iron and stainless steel). UV LED treatment at 280 nm demonstrated superior performance compared to that at 365 nm, achieving a 4.8 log reduction value (LRV) for P. fluorescens pure cultures and, for biofilms, 4.02 LRV for stainless steel and 2.96 LRV for cast iron at 280 nm. Conversely, the results were less effective at 365 nm, with suspected photolytic reactions on cast iron. Quantification of L. pneumophila yielded varying results: 4 LRV using standard plate counts, 1.8 LRV with Legiolert, and 1 LRV with quantitative polymerase chain reaction at 280 nm, while the results were less than 1.5 LRV at 365 nm. This study provides insights into managing opportunistic pathogens and biofilms, emphasizing the need for improved quantification tools to better assess treatment efficacy.

The impact of potassium peroxymonosulphate and chlorinated cyanurates on biofilms of Stenotrophomonas maltophilia: effects on biofilm control, regrowth, and mechanical properties

The activity of two chlorinated isocyanurates (NaDCC and TCCA) and peroxymonosulphate (OXONE) was evaluated against biofilms of Stenotrophomonas maltophilia, an emerging pathogen isolated from drinking water (DW), and for the prevention of biofilm regrowth. After disinfection of pre-formed 48 h-old biofilms, the culturability was reduced up to 7 log, with OXONE, TCCA, and NaDCC showing more efficiency than free chlorine against biofilms formed on stainless steel. The regrowth of biofilms previously exposed to OXONE was reduced by 5 and 4 log CFU cm-2 in comparison to the unexposed biofilms and biofilms exposed to free chlorine, respectively. Rheometry analysis showed that biofilms presented properties of viscoelastic solid materials, regardless of the treatment. OXONE reduced the cohesiveness of the biofilm, given the significant decrease in the complex shear modulus (G*). AFM analysis revealed that biofilms had a fractured appearance and smaller bacterial aggregates dispersed throughout the surface after OXONE exposure than the control sample. In general, OXONE has been demonstrated to be a promising disinfectant to control DW biofilms, with a higher activity than chlorine. The results also show the impact of the biofilm mechanical properties on the efficacy of the disinfectants in biofilm control.

Time-course biofilm formation and presence of antibiotic resistance genes on everyday plastic items deployed in river waters

The plastisphere has been widely studied in the oceans; however, there is little information on how living organisms interact with the plastisphere in freshwater ecosystems, and particularly on how this interaction changes over time. We have characterized, over one year, the evolution of the eukaryotic and bacterial communities colonizing four everyday plastic items deployed in two sites of the same river with different anthropogenic impact. α-diversity analyses showed that site had a significant role in bacterial and eukaryotic diversity, with the most impacted site having higher values of the Shannon diversity index. β-diversity analyses showed that site explained most of the sample variation followed by substrate type (i.e., plastic item) and time since first colonization. In this regard, core microbiomes/biomes in each plastic at 1, 3, 6 and 12 months could be identified at genus level, giving a global overview of the evolution of the plastisphere over time. The measured concentration of antibiotics in the river water positively correlated with the abundance of antibiotic resistance genes (ARGs) on the plastics. These results provide relevant information on the temporal dynamics of the plastisphere in freshwater ecosystems and emphasize the potential contribution of plastic items to the global spread of antibiotic resistance.

Understanding point-of-use tap water quality: From instrument measurement to intelligent analysis using sample filtration

In most cases, point-of-use tap water quality is not routinely monitored due to widely-dispersed sampling sites and the costly tests. Although previous studies have revealed the variation of drinking water quality during distribution in municipal networks, the influence of aging pipes in buildings on quality is still unknown and this makes it difficult for water utilities to conduct regular maintenance. Herein, we have undertaken a survey of tap water samples across 8 districts in Beijing (China) to evaluate the potential effects of pipe age on point-of-use water quality, including turbidity, organic matter characteristics, and bacterial community. By grouping the collected samples according to the pipe age and source water respectively, the results suggested that bacterial diversity is significantly influenced by the pipe age. However, bacterial community structure is clearly influenced by the source water. Similarly, aging pipes in buildings are also responsible for the deterioration of the final water quality, and their effects have been closely linked to selected water quality parameters by evaluating the relevant factors. Moreover, the interrelationships between physico-chemical parameters and bacteria abundance were identified. For example, pH, Ca²⁺, Mg²⁺, Na⁺ and K⁺ showed a positive relationship with Bacillus abundance. In addition, an intelligent analysis method for understanding pipe age, organic matter concentration, and hardness (i.e., Ca²⁺ and Mg²⁺ concentration), based on image analysis of filtered membranes has been developed. The accuracy of prediction was encouraging, but can be improved with the collection of more data from tap water samples. We expect that this method can be exploited by the public to monitor their tap water and provide a feasible and cost-effective approach for water suppliers to locate aging/deteriorating pipes which need to be replaced or maintained.

Microbial Community Structure and Diversity in Drinking Water Supply, Distribution Systems as well as Household Point of Use Sites in Addis Ababa City, Ethiopia

Understanding ecology of microbiomes in drinking water distribution systems is the most important notion in delivering safe drinking water. Drinking water distribution systems harbor various microbiota despite efforts made in improving water infrastructures in the water industry, especially, in developing countries. Intermittent water supply, long time of water storage, low water pressure, and contaminated source water are among many of the factors responsible for poor drinking water quality affecting health of people. The aim of this study was to explore microbial diversity and structure in water samples collected from source water, treated water, reservoirs, and household points of use locations (taps). High-throughput Illumina sequencing technology was employed by targeting the V4 region of the 16S rRNA gene and the V1-V3 region of the 18S rRNA gene to analyze the microbial community structure. Proteobacteria followed by Firmicutes, Bacteroidetes, and Actinobacteria were the core dominating taxa. Gammaproteobacteria was also dominant among other proteobacterial classes across all sampling points. Opportunistic bacterial genera such as Pseudomonas, Legionella, Klebsiella, Escherichia, and Actinobacteria, as well as eukaryotic microbes like Cryptosporidium, Hartmannella, Acanthamoeba, Aspergillus, and Candida were also abundant taxa found along the distribution systems. The shift in microbial community structure from source to point of use locations was influenced by basic factors such as residual chlorine, intermittent water supply, and long-time storage at the household. The complex microbiota detected in different sampling sites in this study brings drinking water quality problem which further causes significant health problems to both human and animal health. Treatment ineffectiveness, disinfection inefficiency, poor maintenance actions, leakage of sewage, and other domestic wastes are few among many other factors responsible for degraded drinking water quality in this study putting health at high risk. Findings of this research provide important and baseline information to understand the microbial profiles of drinking water along source water and distribution systems. Moreover, knowing the microbial profile will help to design proper water quality assurance approaches.

Contaminant Fate and Transport Modeling in Distribution Systems: EPANET-C

Typically, computer-based tools built on mathematical models define the time-series behavior of contaminants, in dissolved or colloidal form, within the spatial boundaries of water distribution systems (WDS). EPANET-MSX has become a standard tool for WDS quality modeling due to its collaboration with EPANET. The critical challenges in applying EPANET-MSX include conceptualizing the exchanges among multiple reacting constituents within the WDS domain and developing the scientific descriptions of these exchanges. Moreover, due to its complicated user interface, the EPANET-MSX application demands programming skills from a software engineering viewpoint. The present study aims to overcome these challenges by developing a novel computer-based tool, EPANET-C. Via built-in and customizable conceptual and mathematical models’ directories, EPANET-C simplifies WDS water quality modeling for users, even those lacking programming expertise. Due to its flexibility, EPANET-C can become a de facto standard tool in WDS quality modeling study both for the industry and the academia.

The role of antibiotics and heavy metals on the development, promotion, and dissemination of antimicrobial resistance in drinking water biofilms

Antimicrobial resistance (AMR), as well as the development of biofilms in drinking water distribution systems (DWDSs), have become an increasing concern for public health and management. As bulk water travels from source to tap, it may accumulate contaminants of emerging concern (CECs) such as antibiotics and heavy metals. When these CECs and other selective pressures, such as disinfection, pipe material, temperature, pH, and nutrient availability interact with planktonic cells and, consequently, DWDS biofilms, AMR is promoted. The purpose of this review is to highlight the mechanisms by which AMR develops and is disseminated within DWDS biofilms. First, this review will lay a foundation by describing how DWDS biofilms form, as well as their basic intrinsic and acquired resistance mechanisms. Next, the selective pressures that further induce AMR in DWDS biofilms will be elaborated. Then, the pressures by which antibiotic and heavy metal CECs accumulate in DWDS biofilms, their individual resistance mechanisms, and co-selection are described and discussed. Finally, the known human health risks and current management strategies to mitigate AMR in DWDSs will be presented. Overall, this review provides critical connections between several biotic and abiotic factors that influence and induce AMR in DWDS biofilms. Implications are made regarding the importance of monitoring and managing the development, promotion, and dissemination of AMR in DWDS biofilms.

Microbial Quality of Liquid Feed for Pigs and Its Impact on the Porcine Gut Microbiome

Simple Summary

Liquid feed is produced by mixing dry feed ingredients with water, and sometimes liquid co-products from the food and beverage industry, at a defined ratio. Liquid feeding of pigs is popular, particularly in parts of northern and western Europe, and can be associated with lower feed costs, improved dry matter intake, growth rate and gut health, compared to dry feeding. However, spontaneous/uncontrolled fermentation upon mixing of feed with water or co-products can decrease the microbial and nutritional quality of the feed, resulting in poorer pig health and growth. For this reason, strategies aimed at optimising liquid feed microbial quality are frequently employed. These include: deliberate fermentation with/without the use of lactic acid bacteria starter cultures that produce lactic acid and lower the feed pH, thereby preventing growth of pathogens. Fermenting only the cereal component of the diet is preferred to whole diet fermentation to minimise loss of free amino acids from the diet during fermentation. This review examines the microbiome of liquid feed and explores how optimisation strategies impact both feed microbial quality and the gut microbiota and growth of liquid-fed pigs. It also covers cleaning and disinfection of liquid feeding systems and how this might impact liquid feed microbial quality.

Abstract

There is evidence that spontaneous fermentation frequently occurs in liquid pig feed that is intended to be delivered as fresh liquid feed, often with a resultant deterioration in the microbial and nutritional quality of the feed, which can negatively affect pig health and growth. Strategies including controlled fermentation with microbial inoculants, pre-fermentation or soaking of the cereal fraction of the diet, enzyme supplementation and dietary acidification have been employed to inhibit pathogens and prevent deterioration of feed nutritional quality, with promising results obtained in many cases. This review evaluates the impact of these strategies on the microbial quality of liquid feed and discusses how they can be further improved. It also investigates if/how these strategies impact the pig gut microbiota and growth performance of liquid-fed pigs. Finally, we review liquid feed system sanitisation practices, which are highly variable from farm to farm and discuss the impact of these practices and whether they are beneficial or detrimental to liquid feed microbial quality. Overall, we provide a comprehensive review of the current state of knowledge on liquid feed for pigs, focusing on factors affecting microbial quality and strategies for its optimisation, as well as its impact on the pig gut microbiome.

Microbial diversity in full-scale water supply systems through sequencing technology: a review

The prevalence of microorganisms in full-scale water supply systems raises concerns about their pathogenicity and threats to public health. Clean tap water is essential for public health safety. The conditions of the water treatment process from the source water to tap water, including source water quality, water treatment processes, the drinking water distribution system (DWDS), and building water supply systems (BWSSs) in buildings, greatly influence the bacterial community in tap water. Given the importance of drinking water biosafety, the study of microbial diversity from source water to tap water is essential. With the development of molecular biology methods and bioinformatics in recent years, sequencing technology has been applied to study bacterial communities in full-scale water supply systems. In this paper, changes in the bacterial community and the influence of each treatment stage on microbial diversity in full-scale water supply systems are classified and analyzed. Microbial traceability analysis and control are discussed, and suggestions for future drinking water biosafety research and its prospects are proposed.

Influence of pipe material on biofilm microbial communities found in drinking water supply system

The biofilms and water samples from a model installation built of PVC-U, PE-HD and cast iron pipes were investigated using standard heterotrophic plate count and 16S rRNA Next Generation Sequencing. The results of the high throughput identification imply that the construction material strongly influences the microbiome composition. PVC-U and PE-HD pipes were dominated with Proteobacteria (54-60%) while the cast pipe was overgrown by Nitrospirae (64%). It was deduced that the plastic pipes create a more convenient environment for the potentially pathogenic taxa than the cast iron. The 7-year old biofilms were described as complex habitats with sharp oxidation-reduction gradients, where co-existence of methanogenic and methanotrophic microbiota takes place. Furthermore, it was found that the drinking water distribution systems (DWDS) are a useful tool for studying the ecology of rare bacterial phyla. New ecophysiological aspects were described for Aquihabitans, Thermogutta and Vampirovibrio. The discrepancy between identity of HPC-derived bacteria and NGS-revealed composition of biofilm and water microbiomes point to the need of introducing new diagnostical protocols to enable proper assessment of the drinking water safety, especially in DWDSs operating without disinfection.

Occurrence and quantification of culturable and viable but non-culturable (VBNC) pathogens in biofilm on different pipes from a metropolitan drinking water distribution system

Waterborne pathogens have been found in biofilms grown in drinking water distribution system (DWDS). However, there is a lack of quantitative study on the culturability of pathogens in biofilms from metropolitan DWDS. In this study, we quantified culturable and viable but non-culturable (VBNC) Escherichia coli, Salmonella enterica, Pseudomonas aeruginosa and Vibrio cholerae in biofilms collected from five kinds of pipes (galvanized steel pipe, steel pipe, stainless steel clad pipe, ductile cast iron pipe and polyethylene pipe) and associated drinking water at an actual chlorinated DWDS in use from China. The results of these comprehensive analyses revealed that pipe material is a significant factor influencing the culturability of pathogen and microbial communities. Network analysis of the culturable pathogens and 16S rRNA gene inferred potential interactions between microbiome and culturability of pathogens. Although the water quality met the Chinese national standard of drinking water, however, VBNC pathogens were detected in both biofilms and water from the DWDS. This investigation suggests that stainless steel clad pipe (SSCP) was a better choice for pathogen control compared with other metal pipes. To our knowledge, this is the first study on culturable and VBNC pathogens in biofilms of different pipe materials in metropolitan DWDS.

Investigate the role of biofilm and water chemistry on lead deposition onto and release from polyethylene: An implication for potable water pipes

In this study, the influence of biofilm presence and water chemistry conditions on lead (Pb) deposition onto low density polyethylene (LDPE) surface was examined. The results demonstrated that biofilm presence on LDPE surfaces strongly and significantly enhanced Pb uptake, with the 13-fold greater equilibrium Pb surface loading when biofilm was present (1602 μg/m²) compared to the condition when it was absent (124 μg/m²). The kinetics of Pb adsorption onto LDPE surface when biofilm was present is best described by Pseudo 2nd order kinetic model. Pb adsorption onto new LDPE surfaces was significantly reduced from 1101 μg/m² to 134 μg/m² with increased aqueous solution's ionic strength from 3 × 10^-6 M to 0.0072 M. The presence of chlorine residual (2 mg/L) significantly reduced Pb adsorption onto LDPE surfaces by possible oxidation of Pb²⁺ to Pb⁴⁺ species. The kinetics of Pb release from LDPE surfaces was investigated under static and dynamic conditions through immediate exposure of Pb accumulated LDPE pellets to the synthetic water at pH 5.0 and 7.8. The results demonstrated a greater Pb release (86 %) at pH 5.0 compared to the pH 7.8 (58 %). An enhanced Pb release into the contact water was found under dynamic conditions compared to static conditions.

The destruction of Escherichia coli adhered to pipe surfaces in a model drinking water distribution system via various antibiofilm agents

The aim of the study is to estimate the effectiveness of three antibiofilm agents against Escherichia coli biofilm that formed in six different types of pipelines. A laboratory-scale water system was built for this work to allow for the creation of biofilm in the pipelines studied. The level of the growth rate of E. coli biofilm cells was monitored over 90 days on those tested pipe materials. The results of bacterial cell densities displayed that the highest biofilm growth was observed in the biofilm formed on the iron (Fe) pipe. In contrast, the biofilm formation rate was significantly lower on copper (Cu) pipe compared to other materials. Three antibiofilm agents, including chlorine, silver ions (Ag⁺ ), and silver nanoparticles (AgNPs), were employed to eradicate the biofilm cells. E. coli counts indicated that AgNPs are more efficient in destructing any formed biofilm cells on all tested materials. At the same time, the chlorine was only useful in the case of biofilm developed on plastic and Cu. However, the antibiofilm efficiency of Ag⁺ performs similarly to chlorine against E. coli biofilm cells. Ultimately, AgNPs are considred the most powerful antibiofilm agent among the other agents toward the biofilm cells in their maturation stage, which offers an encouraging way for the long-term functioning of water systems. PRACTITIONER POINTS: The growth rate of E. coli biofilm cells was investigated on different materials. The count of biofilm cells developed on iron pipes was higher than other materials. The E. coli biofilm on iron pipe could resist chlorine and AgNPs to a large extent. The developed biofilm on copper pipe was more sensitive to chlorine, Ag⁺ . and AgNPs. The biofilm cells could be easily eradicated from plastic-based materials with all tested disinfectants.

Assessing the impact of source water on tap water bacterial communities in 46 drinking water supply systems in China

Drinking water purification and distribution processes shape the bacterial community in tap water; however, this study calls attention to the impact of source water on tap water bacterial community. Herein, paired source and tap water samples were collected from 46 drinking water supply systems in different watersheds across China, and high-throughput sequencing delineated that bacterial richness and diversity decreased and biogeographical distribution pattern weakened in tap water compared to source water. Despite the great changes of bacteria from source to tap, Bayesian-based SourceTracker analysis still verified that the proportional contributions of source water to shaping the tap water bacterial community ranged from 0% to 92.8% (49.73% ± 30.22% on average). This indelible contribution was further confirmed by the Mantel test (P < 0.001), Procrustes test (P < 0.001) and variance partition analysis, which showed that the source water together with geographical location explained 40.11% of tap water bacterial community variation. To explore the potential reasons that explain the great differences in the impact of source water among different samples, the universal shift pattern of bacterial communities from source to tap was summarized as a classification of dominant bacterial taxa: "sensitive taxa" versus "resistant taxa". The taxa including Planctomycetes, Verrucomicrobia, Acidobacteria, Chloroflexi, and δ-Proteobacteria could act as biomarkers to distinguish samples between source and tap water, and were classified as sensitive taxa. In contrast, α-Proteobacteria, β-Proteobacteria, γ-Proteobacteria, Actinobacteria, Firmicutes, Bacteroidetes, and Cyanobacteria were classified as resistant taxa. The abundance of sensitive taxa was negatively correlated with the SourceTracker proportion, while the abundance of resistant taxa was positively correlated with the SourceTracker proportion (P < 0.01). Thus, variation in source water bacterial community could be responsible for the degree of impact on tap water. Our findings give notice that the impact of source water microbiomes must be taken more seriously, and sufficient source water protection and engineering control strategies should be implemented to prevent the biological consequences of source water on tap water.

Water Security in the Galápagos: Socioecological Determinants and Health Implications

Water security is strongly associated with important health outcomes and has many socioecological determinants. Several studies have documented the social determinants of water security and impacts of water security on health, independently. Yet few have examined both components in one setting. Using data from Ecuador's nationally representative health survey (ENSANUT-ECU), we proposed a new methodological framework for assessing water security in the Galápagos and assessed the relationship between socioecological indicators and water security among 2701 individuals in 693 households. We then tested the link between water security and childhood stunting using multilevel mixed effects logistic regressions controlling for household clustering. We found that being higher income in rural settings is significantly protective of water quality (OR 7.35) and increasing household size is associated with reduced water access (OR 0.44). We found no impact of water insecurity on childhood stunting. We observed a marked divergence in water security between islands and discussed potential underlying structural determinants. Understanding the structural predictors of water security and health is a necessary step in improving local health outcomes in the Galápagos. The social and physical factors leading to this water security environment may also be shared by similar locations, broadening the application of these findings.

Visualizing the macroscale spatial distributions of biofilms in complex flow channels using industrial computed tomography

The presence of biofilms in enclosed pipelines can lead to numerous deleterious issues. To date, it has been difficult to use optical imaging techniques to monitor the macroscale spatial distributions of biofilms. To address this concern, a combination of industrial computed tomography (ICT) and a contrast agent was explored to noninvasively visualize biofilms in three types of drip irrigation emitters. The results showed that ICT successfully observed and quantified the macroscale spatial distributions of biofilms. The complex hydrodynamic characteristics in the emitter channels affected the local distributions of biofilms. Biofilms were mainly attached to the lateral and medial faces and biomass decreased along the flow directions. Based on the distributions of biofilms, some emitter structural design defects were further diagnosed. Applying ICT in combination with the contrast agent could potentially provide a visual and effective way to reveal the formation mechanisms of biofilms and to optimize flow channel structures to avoid biofilm accumulations.

Advances in Legionella Control by a New Formulation of Hydrogen Peroxide and Silver Salts in a Hospital Hot Water Network

Legionella surveillance is an important issue in public health, linked to the severity of disease and the difficulty associated with eradicating this bacterium from the water environment. Different treatments are suggested to reduce Legionella risk, however long-term studies of their efficiency are lacking. This study focused on the activity of a new formulation of hydrogen peroxide and silver salts, WTP828, in the hospital hot water network (HWN) to contain Legionella contamination during two years of treatment. The effectiveness of WTP828 was tested measuring physical-chemical and microbiological parameters such as Legionella, Pseudomonas aeruginosa (P. aeruginosa), and a heterotopic plate count (HPC) at 36 °C. Legionella isolates were identified by serotyping and genotyping. WTP 828 induced a reduction in Legionella–positive sites (60% to 36%) and contamination levels (2.12 to 1.7 log₁₀ CFU/L), with isolates belonging to L. pneumophila SG1 (ST1 and ST104), L. anisa and L. rubrilucens widely distributed in HWN. No relevant contamination was found for other parameters tested. The long-term effect of WTP828 on Legionella containment suggest the easy and safe application of this disinfectant, that combined with knowledge of building characteristics, an adequate environmental monitoring and risk assessment plan, become the key elements in preventing Legionella contamination and exposure.

Leaching of Organic Toxic Compounds from PVC Water Pipes in Medina Al-Munawarah, Kingdom of Saudi Arabia

It is well established that the use of synthetic material in water pipes significantly affects the quality of domestic water, especially trace organics that are leached through with the flow of water. In the present study, the migration of volatile organic compounds (VOCs) from water pipes manufactured of polyvinyl chloride (PVC) has been investigated using static laboratory conditions and in residential areas. The contact of deionized water with various PVC pipes for three successive test periods of 24, 48, and 72 h duration has been made. Twenty water samples were collected from houses within Medina Al-Munawarah residential area and were analyzed by using solid phase extraction, followed by high resolution gas chromatography with flame ionized detector (GC-FID). The presence of carbon tetrachloride (CTC), toluene, chloroform, styrene, o-xylene, bromoform (BF), dibromomethane (DBM), cis-1,3-dichloropropane (Cis-1,3-DCP), and trans-1,3-dichloropropane (Trans-1,3-DCP) was initially confirmed. The most frequent contaminants found were DBM, CTC, and toluene that were monitored in 55%, 50%, and 45% of samples, respectively. The levels of CTC, Cis-1,3-DCP, and Trans-1,3-DCP were found to exceed the World Health Organization (WHO) limits in 50%, 20%, and 20% of samples, respectively. The migration test indicated that nine of the targeted contaminants occur in a double distilled water sample incubated in pipe in laboratory level experiment. This implies that these components are more likely to migrate from PVC pipe in home plumbing systems network.

The cooling tower water microbiota: Seasonal dynamics and co-occurrence of bacterial and protist phylotypes

Cooling towers for heating, ventilation and air conditioning are ubiquitous in the built environment. Often located on rooftops, their semi-open water basins provide a suitable environment for microbial growth. They are recognized as a potential source of bacterial pathogens and have been associated with disease outbreaks such as Legionnaires' disease. While measures to minimize public health risks are in place, the general microbial and protist community structure and dynamics in these systems remain largely elusive. In this study, we analysed the microbiome of the bulk water from the basins of three cooling towers by 16S and 18S rRNA gene amplicon sequencing over the course of one year. Bacterial diversity in all three towers was broadly comparable to other freshwater systems, yet less diverse than natural environments; the most abundant taxa are also frequently found in freshwater or drinking water. While each cooling tower had a pronounced site-specific microbial community, taxa shared among all locations mainly included groups generally associated with biofilm formation. We also detected several groups related to known opportunistic pathogens, such as Legionella, Mycobacterium, and Pseudomonas species, albeit at generally low abundance. Although cooling towers represent a rather stable environment, microbial community composition was highly dynamic and subject to seasonal change. Protists are important members of the cooling tower water microbiome and known reservoirs for bacterial pathogens. Co-occurrence analysis of bacteria and protist taxa successfully captured known interactions between amoeba-associated bacteria and their hosts, and predicted a large number of additional relationships involving ciliates and other protists. Together, this study provides an unbiased and comprehensive overview of microbial diversity of cooling tower water basins, establishing a framework for investigating and assessing public health risks associated with these man-made freshwater environments.

Legionella growth potential of drinking water produced by a reverse osmosis pilot plant

Treatment processes, such as membrane filtration with reverse osmosis (RO), are used to produce drinking water with a high degree of biostability. To our knowledge, the influence of RO water on biofilm formation and growth of L. pneumophila has not yet been investigated. Therefore, this study aimed (i) to determine the Legionella growth potential of (remineralised) RO-water produced by a pilot plant and to compare this to conventional treated groundwater, and (ii) to determine if different pipe materials, in contact with remineralised RO-water, can cause growth of L. pneumophila. The Legionella growth potential of water was determined with the boiler biofilm monitor (BBM) that mimics the flow of water in a premise plumbing system. The Legionella growth potential of materials in contact with remineralised RO-water was determined by using the biomass production potential (BPP)-test. ATP concentrations in the biofilm on the glass rings from the BBM fed with (remineralised) RO water fluctuated around 100 pg ATP cm^-2. In contrast, BBMs fed with conventionally treated water resulted in ten-fold higher ATP concentrations in the biofilm. Moreover, conventionally treated water had a Legionella growth potential that was 1000-fold higher than that of (remineralised) RO-water. Furthermore, glass, copper and PVC-C had the lowest biofilm concentrations and Legionella growth potential in the BPP-test, followed by PE-Xb, PE-Xc and PE-100. The highest biofilm concentration and Legionella growth potential were with PVC-P. Hence, our study demonstrated that remineralised RO-water did not enhance growth of L. pneumophila in the BBM that mimics the premises plumbing system. However, when PE or PVC-P materials are used growth of L. pneumophila can still occur in the premises plumbing system despite the high quality of the supplied remineralised RO-water.

Occurrence and characterisation of biofilms in drinking water systems of broiler houses

Background

Water quality in the drinking water system (DWS) plays an important role in the general health and performance of broiler chickens. Conditions in the DWS of broilers are ideal for microbial biofilm formation. Since pathogens might reside within these biofilms, they serve as potential source of waterborne transmission of pathogens to livestock and humans. Knowledge about the presence, importance and composition of biofilms in the DWS of broilers is largely missing. In this study, we therefore aim to monitor the occurrence, and chemically and microbiologically characterise biofilms in the DWS of five broiler farms.

Results

The bacterial load after disinfection in DWSs was assessed by sampling with a flocked swab followed by enumerations of total aerobic flora (TAC) and Pseudomonas spp. The dominant flora was identified and their biofilm-forming capacity was evaluated. Also, proteins, carbohydrates and uronic acids were quantified to analyse the presence of extracellular polymeric substances of biofilms. Despite disinfection of the water and the DWS, average TAC was 6.03 ± 1.53 log CFU/20cm². Enumerations for Pseudomonas spp. were on average 0.88 log CFU/20cm² lower. The most identified dominant species from TAC were Stenotrophomonas maltophilia, Pseudomonas geniculata and Pseudomonas aeruginosa. However at species level, most of the identified microorganisms were farm specific. Almost all the isolates belonging to the three most abundant species were strong biofilm producers. Overall, 92% of all tested microorganisms were able to form biofilm under lab conditions. Furthermore, 63% of the DWS surfaces appeared to be contaminated with microorganisms combined with at least one of the analysed chemical components, which is indicative for the presence of biofilm.

Conclusions

Stenotrophomonas maltophilia, Pseudomonas geniculata and Pseudomonas aeruginosa are considered as opportunistic pathogens and could consequently be a potential risk for animal health. Additionally, the biofilm-forming capacity of these organisms could promote attachment of other pathogens such as Campylobacter spp. and Salmonella spp.

Electronic supplementary material

The online version of this article (10.1186/s12866-019-1451-5) contains supplementary material, which is available to authorized users.

Disinfectant residual stability leading to disinfectant decay and by-product formation in drinking water distribution systems: A systematic review

Secondary disinfectants, such as chlorine and chloramine, have been widely applied to minimise microbial risks in drinking water during distribution. Key challenges have included the maintenance of stable concentrations of disinfectant residuals and the control of disinfection by-products that may form as a consequence of residual decay processes. Many factors may influence disinfectant residual stability and the consequential formation of by-products. Thus predictions of disinfectant stability and by-product formation are multifactorial problems, complete with numerous complications of parameter co-dependence and feedback amplification of some key parameters. The aim of this review was to derive an understanding of how disinfectant residual stability in drinking water distribution systems is impacted by various influencing factors such as water quality and operational parameters. Factors known to influence disinfectant stability and by-product formation were critically reviewed. A systematic review method was applied to identify 1809 journal articles published in the two decades from January 1998 to December 2017. From the initial screening, 161 papers were selected for detailed assessment. Important factors were identified to include temperature, water age, piping material, corrosion products, pH, hydraulic condition, disinfectant residual type and dosage and microbial activity. Microbial activity is a particularly complex parameter on which to base predictions since many factors are known to influence the degree and nature of such activity. These include temperature, water age, piping material, corrosion products, nutrients, natural organic matter, hydraulic condition and disinfectant residual type and dosage. Disinfectant types and dosages were found to be among the most important factors. Many knowledge gaps and research needs still remain, including the need for a more complete understanding of the factors that influence the production of nitrogenous disinfection by-products.

Water Quality Changes in Cement-Lined Water Pipe Networks

This research focused on a model setup fed with underground water pumped into a water supply network. The scope of the research included a long- and a short-term stagnation of water in the setup and a water flow of 0.1 m/s. The water supplied into the system gradually lost its corrosive properties and developed calcium carbonate precipitation capability. These processes indicated that cement components migrate from the lining into the water. Apart from the primary components, the presence of the following trace elements was found: iron (399.6 ppb), magnesium (17.8 ppm), zinc (26.9 ppb), barium (22.6 ppb), boron (21.6 ppb), sodium (10.8 ppm), gallium (2.1 ppb). At early stages of the operation, recorded quantities were not significant. Leaching of the trace elements from cement increased after water was chlorinated. In turn, the highest percent increases were observed in the case of zinc (217%), boron (19%) and gallium (12%), whereas the increase for sodium, iron, barium and magnesium in water was insignificant (reaching a few percent). A repeated analysis of samples of stagnant water in the setup showed that most of trace elements were below the detectability level. Final concentrations of all elements identified in the water after its contact with internal cement mortar lining were much lower than the limit values set out for drinking water.

Identification and Genotypic Characterization of Potentially Pathogenic Acanthamoeba Isolated from Tap Water in Wuxi, China

Members of genus Acanthamoeba are widely distributed in the environment. Some are pathogenic and cause keratitis and fatal granulomatous amoebic encephalitis. In this study, we isolated an Acanthamoeba CJW/W1 strain from tap water in Wuxi, Jiangsu Province, China. Its 18S rDNA was sequenced and a phylogenetic tree was constructed. The isolated cysts belonged to morphologic group II. Comparison of 18S rDNA sequences of CJW/W1 strain and other isolates showed high similarity (99.7%) to a clinical isolate Asp, KA/E28. A phylogeny analysis confirmed this isolate belonged to the pathogenic genotype T4, the most common strain associated with Acanthamoeba-related diseases. This is the first report of an Acanthamoeba strain isolated from tap water in Wuxi, China. Acanthamoeba could be a public health threat to the contact lens wearers and, therefore, its prevalence should be monitored.

Characteristics of water quality and bacterial communities in three water supply pipelines

Many cities in China have implemented urban water supply pipe network renovation projects; however, at the beginning of new pipeline replacements, customers often complain about water quality problems, such as red water, odour and other water quality problems. To overcome these frequent water quality problems, this study selected a commonly used ductile cast iron (DCI) pipe, stainless steel (SS) pipe and high-density polyethylene (HDPE) pipe for laboratory simulations of the water quality regularity of new pipes, the variations in pipe inner walls, and the presence of microbial communities. Based on the research results, combined with actual water sample analysis, the stabilisation time of the interaction between the tubings inner walls and bulk water was determined, to allow pipeline cleaning and water quality maintenance. The results showed that the water quality change in the DCI was the most significant, while the SS and the HDPE pipes showed consistent changes with severe initial deterioration, then later stabilisation to meet the required standard. The DCI inner wall changed from a loose porous particle shape to a relatively dense and irregular three-dimensional shape, with the constituent elements mainly being O and Ca. The SS inner wall had a uniform structure in the early stage, but are obvious spherical balls of different sizes formed later, with the elemental composition here mainly being C and O. The HDPE inner wall was smooth and had small perforations in the early stage, while the perforation in the middle and late stages increased to become rough and scale-like at a much later stage. The proportion of Proteobacteria in effluents (72.82% to 86.87%) was significantly increased compared with the influent (48.45%), while the proportion of Proteobacteria (86.87%) in the DCI was significantly higher than in the SS (74.28%) and HDPE pipes (81.68%). Moreover, compared with the influent (23.33%), the Bacteroidetes (2.79% to 3.32%) levels in the effluents were significantly reduced, indicating that the pipe material affects the microbial abundance in water.

Factory water interacts with pipelines resulting in water quality deterioration. To stop this happening and to improve the selection of water supply pipes, it is important to study the water quality, the inner wall of the pipeline, and the microbial community.

Polydopamine functionalized hydrogel beads as magnetically separable antibacterial materials

In the present study, magnetically separable hydrogel beads of ionically cross-linked alginate were functionalized with polydopamine (PDA). The rationale behind this was to enhance the structural stability and antibacterial profile of PDA/Alg/Fe₃O₄ beads (K3). Incorporation of superparamagnetic magnetite (Fe₃O₄) nanoparticles endowed the hydrogel beads with magnetism. X-ray diffraction (XRD) analysis revealed the successful formation of pure Alg/Fe₃O₄ nanoparticles having an inverse spinel structure. Vibrating sample magnetometry (VSM) confirmed their superparamagnetic behaviour with M_s values of 36.18 and 30.46 emu g⁻¹ at 5 and 300 K, respectively. High resolution-transmission electron microscopy (HR-TEM) images showed alginate capping and the size of the Alg/Fe₃O₄ nanoparticles (∼8 nm). The successful deposition of PDA granules on the K3 bead surface was verified by field emission-scanning electron microscopy (FE-SEM). The PDA functionalization was further justified by VSM, XRD and Fourier-transform infrared spectroscopy (FT-IR). During swelling experiments, K3 beads displayed appreciable structural stability compared to bare/non-functionalized beads. Wettability studies revealed K3 beads to be hydrophilic with a contact angle of ∼55°. Rheological parameters including storage modulus (G′) and shear viscosity of K3 increased upon PDA functionalization. During antibacterial tests, K3 strongly inhibited E. coli, S. typhi, S. aureus and L. monocytogenes in a concentration and time dependent manner. Fluorescence staining experiments showed that K3 could greatly alter the bacterial membrane integrity. Reusability experiments with K3 beads substantiated their effective broad-spectrum antibacterial performance for three consecutive cycles.

Surface functionalization with polydopamine augments the structural stability and antibacterial profile of magnetic hydrogel beads.

Molecular characterization and phylogenetic analysis of Acanthamoeba isolates in tap water of Beni-Suef, Egypt

The genus Acanthamoeba is a free-living amoeba widely distributed in various aquatic environments. It is an etiologic cause of amoebic encephalitis and keratitis particularly for immunocompromised individuals. The purpose of the present study was to investigate Acanthamoeba species prevalence in household and hospital potable water in Beni-Suef governorate, Egypt, and to employ sequencing methods to identify positive Acanthamoeba species isolates and their potential health risks. Sixty tap water samples (30 household and 30 governmental and private hospital settings) collected from Beni-Suef governorate, Egypt were filtered, cultured on non-nutrient agar, identified by morphotyping keys after staining with Giemsa stain and then confirmed by PCR using Acanthamoeba specific primers. Twenty positive samples were successfully genetically characterized and phylogenetically analyzed to identify Acanthamoeba species. The total detection rate for Acanthamoeba was 48/60 (80%); Acanthamoeba contamination in water collected from domestic houses was higher than in hospitals; 27/30 (90%) versus 21/30 (70%) with statistical significant value (P value = 0.05). Sequencing of 20 positive isolates revealed Acanthamoeba T4 in 65% and T2 in 35%. To our knowledge, this is the first research that documents the occurrence and phylogeny of Acanthamoeba species in Beni-Suef, Egypt. The presence of a higher percentage of Acanthamoeba species in tap water, in particular T4, highlights the potential health hazards for immunocompromised individuals and emphasizes the urgent need for the implementation of effective filtration and disinfection measures.

Inhibition of biofilm growth on polymer-MWCNTs composites and metal surfaces

There is an increased interest in incorporating multi-wall carbon nanotubes (MWCNTs) into polymer matrices to control the adhesion of bacteria to surfaces and the subsequent formation of biofilm growth on the surface of water pipes, food packages, and medical devices. Microbial interactions with carbon nanotube-polymer composites in the environment are not well understood. The growth of Pseudomonas fluorescens (gram-negative) and Mycobacterium smegmatis (gram-positive) biofilms on copper, polyethylene (PE), polyvinyl chloride, and stainless steel was compared with growth on MWCNT-PE composites in order to gain insight into the effect of the surface properties of nanomaterials on the attachment and proliferation of microorganism which could result in the engineering of better, non-fouling materials. A statistical analysis of the biofilm growth showed a significant impact of materials for both P. fluorescens (p < 0.0001) and M. smegmatis (p = 0.00426). Biofilm growth after 56 days on PE compared to biofilm growth on copper surfaces decreased by 46.4% and 34.9% for P. fluorescens and M. smegmatis, respectively. Biofilm growth on PE-multiwall-carbon-nanotubes (MWCNTs)-composites surface compared to PE decreased by 89.3% and 29% for P. fluorescens and M. smegmatis, respectively. Bacterial species (p < 0.0006) and surface roughness (p < 0.0001) were important factors in determining the attachment and initial biofilm growth rate. The interactions between cells and material surface could be attributed to the complicated and collective effect of electrostatic forces, hydrophobic interactions, and hydrogen/covalent bonding. Further study is needed to determine whether or not there is a difference between the cell attachment in the exponential growth phase and the stationary, or decay, phase cells.

Microbial Interaction as a Determinant of the Quality of Supply Drinking Water: A Conceptual Analysis

This conceptual analysis elucidates the microbial interaction inside municipal distribution pipes, subsequent deterioration in the quality of the supply water, and its impacts on public health. Literature review involved a total of 21 original reports on microbiological events inside the water distribution system were studied, summarizing the current knowledge about the build-up of microbes in treated municipal water at various points of the distribution system. Next, original reports from the microbiological analysis of supply water from Bangladesh were collected to enlist the types of bacteria found growing actively. A schematic diagram of microbial interaction among the genera was constructed with respect to the physical, chemical, and microbiological quality of the supply water. Finally latest guidelines and expert opinions from public health authorities around the world are reviewed to keep up with using cutting-edge molecular technology to ensure safe and good quality drinking water for municipal supply.

Assessing the origin of bacteria in tap water and distribution system in an unchlorinated drinking water system by SourceTracker using microbial community fingerprints

The general consensus is that the abundance of tap water bacteria is greatly influenced by water purification and distribution. Those bacteria that are released from biofilm in the distribution system are especially considered as the major potential risk for drinking water bio-safety. For the first time, this full-scale study has captured and identified the proportional contribution of the source water, treated water, and distribution system in shaping the tap water bacterial community based on their microbial community fingerprints using the Bayesian "SourceTracker" method. The bacterial community profiles and diversity analyses illustrated that the water purification process shaped the community of planktonic and suspended particle-associated bacteria in treated water. The bacterial communities associated with suspended particles, loose deposits, and biofilm were similar to each other, while the community of tap water planktonic bacteria varied across different locations in distribution system. The microbial source tracking results showed that there was not a detectable contribution of source water to bacterial community in the tap water and distribution system. The planktonic bacteria in the treated water was the major contributor to planktonic bacteria in the tap water (17.7-54.1%). The particle-associated bacterial community in the treated water seeded the bacterial community associated with loose deposits (24.9-32.7%) and biofilm (37.8-43.8%) in the distribution system. In return, the loose deposits and biofilm showed a significant influence on tap water planktonic and particle-associated bacteria, which were location dependent and influenced by hydraulic changes. This was revealed by the increased contribution of loose deposits to tap water planktonic bacteria (from 2.5% to 38.0%) and an increased contribution of biofilm to tap water particle-associated bacteria (from 5.9% to 19.7%) caused by possible hydraulic disturbance from proximal to distal regions. Therefore, our findings indicate that the tap water bacteria could possibly be managed by selecting and operating the purification process properly and cleaning the distribution system effectively.

Ugly ducklings-the dark side of plastic materials in contact with potable water

Bath toys pose an interesting link between flexible plastic materials, potable water, external microbial and nutrient contamination, and potentially vulnerable end-users. Here, we characterized biofilm communities inside 19 bath toys used under real conditions. In addition, some determinants for biofilm formation were assessed, using six identical bath toys under controlled conditions with either clean water prior to bathing or dirty water after bathing. All examined bath toys revealed notable biofilms on their inner surface, with average total bacterial numbers of 5.5 × 10⁶ cells/cm² (clean water controls), 9.5 × 10⁶ cells/cm² (real bath toys), and 7.3 × 10⁷ cells/cm² (dirty water controls). Bacterial community compositions were diverse, showing many rare taxa in real bath toys and rather distinct communities in control bath toys, with a noticeable difference between clean and dirty water control biofilms. Fungi were identified in 58% of all real bath toys and in all dirty water control toys. Based on the comparison of clean water and dirty water control bath toys, we argue that bath toy biofilms are influenced by (1) the organic carbon leaching from the flexible plastic material, (2) the chemical and biological tap water quality, (3) additional nutrients from care products and human body fluids in the bath water, as well as, (4) additional bacteria from dirt and/or the end-users’ microbiome. The present study gives a detailed characterization of bath toy biofilms and a better understanding of determinants for biofilm formation and development in systems comprising plastic materials in contact with potable water.

While bathing typically means good hygiene, bath toys can serve as incubators for microbial growth. Microbes colonize nearly every natural and human-made surface, sometimes living within complex communities called biofilms. A team led by Frederik Hammes at the Swiss Federal Institute of Aquatic Science and Technology found that tap water bacteria and fungi readily formed biofilms inside bath toys, suggesting that bathing provides food for microbes. These nutrients may come from bath toys’ polymeric material, from care products like soap and from human secretions like sweat. While 16S rRNA sequence analysis found that some of the microbes were related to disease-causing strains, future work is needed to assess the disease risk from these bath toy-associated biofilms. This work sheds light on how microbes are spread by our routine activities and that we are bathed in microbes, literally.

Bacteria in drinking water sources of a First Nation reserve in Canada

Approximately 20% of the 600 First Nations reserves across Canada are under a drinking water advisory, often due to unacceptable levels of bacteria. In this study, we detected fecal bacteria at an alarmingly high frequency in drinking water sources in a fly-in First Nations community, most notably in buckets/drums of homes without running water where Escherichia coli levels ranged from 20 to 62,000CFU/100mL. The water leaving the water treatment plant was free of E. coli and its free residual chlorine concentration (0.67mg/L) was within the range typically observed for treated water in Canada. Water samples from taps in homes served by cisterns, and those sampled from the water truck and community standpipe, always showed unacceptable levels of E. coli (1 to 2100CFU/100mL) and free residual chlorine concentrations below the 0.2mg/L required to prevent bacterial regrowth. Samples from taps in homes served by piped water had lower levels of E. coli (0 to 2CFU/100mL). DNA- and RNA-based 16S rRNA Illumina sequencing demonstrated that piped and cisterns water distribution systems showed an abundance of viable cells of Alphaproteobacteria indicative of biofilm formation in pipes and cisterns. The alpha diversity, based on observed OTUs and three other indices, was lowest in water truck samples that supplied water to the cistern and the low free residual chlorine concentration (0.07mg/L) and predominance of Betaproteobacteria (63% of viable cells) that were immediately detected after the truck had filled up at the water treatment plant was indicative of contamination by particulate matter. Given these findings, First Nation residents living without running water and relying on inadequate water distribution systems are at higher risk of contracting water-born illnesses. We urge all governments in Canada to expand their investments in supporting and sustaining water as a human right in Canada's First Nations communities.

Prevalence of pathogenic free-living amoeba and other protozoa in natural and communal piped tap water from Queen Elizabeth protected area, Uganda

Background

Pathogenic water dwelling protozoa such as Acanthamoeba spp., Hartmannella spp., Naegleria spp., Cryptosporidium spp. and Giardia spp. are often responsible for devastating illnesses especially in children and immunocompromised individuals, yet their presence and prevalence in certain environment in sub-Saharan Africa is still unknown to most researchers, public health officials and medical practitioners. The objective of this study was to establish the presence and prevalence of pathogenic free-living amoeba (FLA), Cryptosporidium and Giardia in Queen Elizabeth Protected Area (QEPA).

Methods

Samples were collected from communal taps and natural water sites in QEPA. Physical water parameters were measured in situ. The samples were processed to detect the presence of FLA trophozoites by xenic cultivation, Cryptosporidium oocysts by Ziehl-Neelsen stain and Giardia cysts by Zinc Sulphate floatation technique. Parasites were observed microscopically, identified, counted and recorded. For FLA, genomic DNA was extracted for amplification and sequencing.

Results

Both natural and tap water sources were contaminated with FLA, Cryptosporidium spp. and Giardia spp. All protozoan parasites were more abundant in the colder rainy season except for Harmannella spp. and Naegleria spp. which occurred more in the warmer months. The prevalence of all parasites was higher in tap water than in natural water samples. There was a strong negative correlation between the presence of Acanthamoeba spp., Hartmannella spp., Cryptosporidium spp. and Giardia spp. with Dissolved Oxygen (DO) (P < 0.05). The presence of Cryptosporidium spp. showed a significant positive correlation (P < 0.05) with conductivity, pH and Total Dissolved Solids (TDS); whereas the presence of Giardia spp. had only a strong positive correlation with TDS. Molecular genotyping of FLA produced 7 Acanthamoeba, 5 Echinamoeba, 2 Hartmannella, 1 Bodomorpha, 1 Nuclearia and 1 Cercomonas partial sequences.

Conclusions

All water collection sites were found to be contaminated with pathogenic protozoa that could possibly be the cause of a number of silent morbidities and mortalities among rural households in QEPA. This implies that water used by communities in QEPA is of poor quality and predisposes them to a variety of protozoan infections including the FLA whose public health importance was never reported, thus necessitating adoption of proper water safety measures.

Electronic supplementary material

The online version of this article (doi:10.1186/s40249-016-0162-5) contains supplementary material, which is available to authorized users.

Representative sampling of natural biofilms: influence of substratum type on the bacterial and fungal communities structure

In situ biofilm sampling is a key step for the study of natural biofilms and using methodologies that reflect natural diversity is necessary to guarantee representative sampling. Here, we focalise on the impact of the type of substrata on which biofilms grow on bacterial and fungal communities’ structure. The indirect molecular approach, Denaturing Gel Gradient Electrophoresis (DGGE) of a gene fragment coding for either 16S rRNA or 28S rRNA, for bacteria or fungi respectively, was used to evaluate the variability of microbial community structures among different biofilm substrata: natural (pebbles, live plants, wood and sediment), or artificial (glass, Plexiglas^® and sterile wood), in a small river (the Loiret, France). Multivariate statistics, band richness and diversity indexes (Shannon and Simpson) were used to highlight variations in community structure between substrata. Results showed variations of bacterial and fungal diversity between different substrata according to substratum properties/origin (natural or artificial, organic or inorganic) but there was no optimal substratum for sampling, and artificial substrata were not significantly less applicable than natural substrata. Pooling 4 different substrata types allowed a higher bacterial and fungal biodiversity recovery. Point contact sampling may thus gain in robustness by increasing the number of substrata considered. Fungal species richness was similar to the bacterial one on most substrata which suggested they should be more frequently considered in riverine biofilm studies.

Polyphasic analysis of an Azoarcus-Leptothrix-dominated bacterial biofilm developed on stainless steel surface in a gasoline-contaminated hypoxic groundwater

Pump and treat systems are widely used for hydrocarbon-contaminated groundwater remediation. Although biofouling (formation of clogging biofilms on pump surfaces) is a common problem in these systems, scarce information is available regarding the phylogenetic and functional complexity of such biofilms. Extensive information about the taxa and species as well as metabolic potential of a bacterial biofilm developed on the stainless steel surface of a pump submerged in a gasoline-contaminated hypoxic groundwater is presented. Results shed light on a complex network of interconnected hydrocarbon-degrading chemoorganotrophic and chemolitotrophic bacteria. It was found that besides the well-known hydrocarbon-degrading aerobic/facultative anaerobic biofilm-forming organisms (e.g., Azoarcus, Leptothrix, Acidovorax, Thauera, Pseudomonas, etc.), representatives of Fe(2+)-and Mn(2+)-oxidizing (Thiobacillus, Sideroxydans, Gallionella, Rhodopseudomonas, etc.) as well as of Fe(3+)- and Mn(4+)-respiring (Rhodoferax, Geobacter, Magnetospirillum, Sulfurimonas, etc.) bacteria were present in the biofilm. The predominance of β-Proteobacteria within the biofilm bacterial community in phylogenetic and functional point of view was revealed. Investigation of meta-cleavage dioxygenase and benzylsuccinate synthase (bssA) genes indicated that within the biofilm, Azoarcus, Leptothrix, Zoogloea, and Thauera species are most probably involved in intrinsic biodegradation of aromatic hydrocarbons. Polyphasic analysis of the biofilm shed light on the fact that subsurface microbial accretions might be reservoirs of novel putatively hydrocarbon-degrading bacterial species. Moreover, clogging biofilms besides their detrimental effects might supplement the efficiency of pump and treat systems.

Pseudomonas aeruginosa outcompetes other bacteria in the manifestation and maintenance of a biofilm in polyvinylchloride tubing as used in dental devices

In a PVC tube as a model system for dental devices, Pseudomonas aeruginosa outcompetes Staphylococcus aureus and Klebsiella pneumoniae for the biofilm formation. P. aeruginosa has advantage over the other strains due to higher tolerance for low-nutrient situations or direct killing by the production of soluble factors like pyocyanin.