Bioremediation techniques-classification based on site of application: principles, advantages, limitations and prospects

Perfluoroalkylated benzoic acid-based phase-selective supramolecular self-assembly system for dye removal

In this study, perfluoroalkylated derivatives of benzoic acid S-6 and O-6 were designed and synthesized as supramolecular gelators using a simple one-step method. Both S-6 and O-6 could form gels in various organic solvents. Notably, these compounds have potential applications in environmental remediation, with S-6 demonstrating significant promise for oil spill treatment. After five recycling cycles, the recovery rate of the gelation capacity for diesel oil remained above 90%. Xerogels derived from O-6 at a concentration of 5 wt% in pump oil effectively adsorbed Rhodamine B (RhB). The adsorption process primarily involved chemical adsorption, electrostatic interactions between the O-6 xerogel and the cationic RhB dye, as well as physical adsorption within the xerogel's pores. In summary, benzoic acid derivatives represent a kind of multifunctional, recyclable, and efficient materials.

Bioremediation of catecholic pollutants with novel oxygen-insensitive catechol 2,3-dioxygenase and its potential in biomonitoring of catechol in wastewater

The oxygenases are essential in the bioremediation of xenobiotic pollutants. To overcome cultivability constraints, this study aims to identify new potential extradiol dioxygenases using the functional metagenomics approach. RW1-4CC, a novel catechol 2,3-dioxygenase, was isolated using functional metagenomics approach, expressed in a heterologous system, and characterized thoroughly using state-of-the-art techniques. The serial truncation mutations of the C-terminal tail increase the catalytic efficiency of truncated proteins against the 2,3-dihydroxybiphenyl (2,3-DHB). RW1-4CC lose its 50% of activity at 60 °C, with its optimum temperature at 15 °C, whereas the truncated proteins were found to be more stable at extended temperature range, i.e., both RW1-4CC-A and RW1-4CC-B retained 50% of their activity at 75 °C, with their temperature optima at 55 °C and 65 °C, respectively. The molecular docking studies further confirmed the high binding affinity of truncated proteins for the 2,3-DHB than catechol. The molecular modeling analysis revealed the difference in iron-binding and substrate interacting environment of RW1-4CC and its truncated proteins. The efficiency of purified RW1-4CC to detect catechol was evaluated using a gold screen-printed electrode by cyclic voltammetry. RW1-4CC detected catechol in wastewater and artificial seawater up to the concentration of 100 μm, which makes it reliable for catechol detection.

Methylmercury demethylation and volatilization by animals expressing microbial enzymes

Mercury is a highly toxic trace metal that readily biomagnifies in food webs where it is inaccessible to current bioremediation methods. Animals could potentially be engineered to detoxify mercury within their food webs to clean up impacted ecosystems. We demonstrate that invertebrate (Drosophila melanogaster) and vertebrate (Danio rerio) animal models can express organomercurial lyase (MerB) and mercuric reductase (MerA) from Escherichia coli to demethylate methylmercury and remove it from their biomass as volatile elemental mercury. The engineered animals accumulated less than half as much mercury relative to their wild-type counterparts, and a higher proportion of mercury in their tissue was in the form of less bioavailable inorganic mercury. Furthermore, the engineered animals could tolerate higher exposures to methylmercury compared to controls. These findings demonstrate the potential of using engineered animals for bioremediation and may be applied to reduce the burden of methylmercury in impacted ecosystems by disrupting its biomagnification or to treat contaminated organic waste streams.

Nanotubular clay minerals for simultaneous sorption of pesticides and PFCAs: a molecular simulation study

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) and herbicides are important persistent contaminants that require specific management. A variety of herbicides is stored in fluorinated containers in the form of aquatic solutions. In such environments, the simultaneous release of PFAS and herbicides takes place. Nature-based solutions, such as the use of clay materials as possible sorbents, are attractive for the immobilization of such contaminants and environmental protection. Nanotubular clay minerals, such as halloysite and imogolite, are sufficient sorbents for herbicides. Due to their structural morphology, such materials could be efficient sorbents for the simultaneous immobilization of PFAS and herbicides. In this study, the potential sorption of a short chain PFAS, perfluorobutanoic acid (PFBA), sorbent of PFBA, and herbicides (atrazine and diuron) were investigated. Forcefield calculations were used for the classical molecular simulation study. Different distributions, arrangements, and ratios of the investigated molecules were investigated for the complete structural and energy characterization of the systems. Both clay minerals created stable complexes with PFBA as well as with both PFBA and herbicide molecules. Halloysite mineral led to similar total energies of the system with sorbed PFBA molecules alone, herbicides alone, or both of the pollutants. In contrast, imogolite led to lower energies with sorbed herbicides and showed relatively higher energies when interacting with PFBA. The complexes with both of the pollutants presented moderate energies. Electrostatic interactions were dominant in all the investigated complexes.

Agro-industrial wastes and their application perspectives in metal decontamination using biocomposites and bacterial biomass: a review

Contamination of water bodies is a significant global issue that results from the deliberate release of pollutants into the environment, especially from mining and metal processing industries. The main pollutants generated by these industries are metallic wastes, particularly metals, which can cause adverse effects on the environment and human health. Therefore, it is crucial to develop effective and sustainable approaches to prevent their discharge into the environment. Biofiltration is a technique used to remediate contaminated fluids using biological processes. Microorganisms and agro-industrial wastes have been used successfully as biosorbents. Hence, this review emphasizes the innovative use of agro-industrial waste reinforced with microbial biomass as bioadsorbents, highlighting their dual capacity for metal removal through various bioremediation mechanisms. The mechanisms at play in these biocomposite materials, which offer enhanced sustainability, are also analyzed. This study contributes to the advancement of knowledge by suggesting new strategies for integrating reinforced materials in biosorption processes, thus providing a novel perspective on the potential of lignocellulosic-based systems to improve decontamination efforts. On the other hand, it shows some studies where the optimization and scaling-up of biosorption processes are reported. Additionally, the implementation of multisystem approaches, leveraging multiple bioremediation techniques simultaneously, can further enhance the efficiency and sustainability of metal removal in contaminated environments.

Potential role of meiofauna in bioremediation: results from a microcosm experiment

Meiofauna can act as remediation organisms by stimulating microphytobenthos, sequestering carbon dioxide, and degrading organic debris. Sediments from two basins in Lake Mariut, Egypt, which had undergone multiple rounds of restoration, were used in microcosm experiments to assess the role of meiofauna in organic matter degradation. Treatments included sediments with and without fauna, and four chlorophyll-a additions (0.002, 0.035, and 0.005 mg/ml, with 0.000 mg/ml as the reference). Meiofauna, chlorophyll-a, and organic matter were measured over two 8-month periods in 2014. Most treatments exhibited a rapid loss of organic matter, reducing organic content by two to eight times by study end. By the end, meiofaunal populations increased one- to 13-fold in microcosms with algae additions of 0.035 and 0.005 mg/ml chlorophyll-a in the Main and Northwest basins but had no change in those with 0.002 and zero mg/ml. Meiofauna abundance rose with rising temperature and oxygen levels, while organic matter declined. There was no correlation between chlorophyll-a levels and meiofauna abundance indicating that meiofauna likely play a role in the aerobic decomposition of organic matter at high temperatures. The meiofauna contribute to the diversity of ecosystems and have a potential role in ecosystem processes; therefore, conservation efforts should also include meiofauna.

Actinorhizal plants and Frankiaceae: The overlooked future of phytoremediation

Bioremediation of degraded soils is increasingly necessary due to rising food demand, reductions in agricultural productivity, and limitations in total available arable area. Several bioremediation strategies could be utilized to combat soil degradation, with phytoremediation emerging as a standout option due to its in situ approach and low implementation and maintenance costs compared to other methods. Phytoremediation is also a sustainable solution, which is increasingly desirable to blunt the progression of global warming. Actinorhizal plants display several desirable traits for application in phytoremediation, including the ability to revegetate saline soil and sequester heavy metals with low foliar translocation. Additionally, when grown in association with Frankiaceae endophytes, these abilities are improved and expanded to include the degradation of anthropogenic pollutants and the restoration of soil fertility. However, despite this significant potential to remediate marginalized land, the actinorhizal-Frankiaceae symbiosis remains heavily understudied and underutilized. This review aims to collate the scattered studies that demonstrate these bioremediation abilities and explain the mechanics behind such abilities to provide the necessary insight. Finally, this review will conclude with proposed future directions for utilizing this symbiosis and how it can be optimized further to facilitate improved bioremediation outcomes.

Isolation of marine-derived filamentous fungi and their potential application for bioremediation process

We evaluated the bioremediation potential of petroleum-derived compounds using fungal strains isolated from marine samples collected on the coast of the states of Paraná, Brazil. About 75 isolated filamentous fungi were subjected to assays including decolorization of the synthetic dye Remazol Brilliant Blue R (RBBR), tolerance to diesel oil, production of bioemulsifying and degradation of pyrene. Nine isolates could decolorize RBBR between 3.4% and 88.16%. Ten were able to tolerate diesel oil and/or pyrene. One isolate was able to produce compounds with emulsifying properties. Three strains, Trichoderma sp. FM14 (Penicillium spp. FM02 and FM16, and FM14) were able to degrade pyrene between 33.0 and 42.4%, after 8 days. The results of the present work encourage future studies to optimize enzymatic conditions using isolates with biotechnological potential in bioremediation studies of marine environments contaminated with industrial pollutants including hydrocarbons derived from petroleum such as diesel oil and PAHs and synthetic dyes.

Enhancing Environmental and Human Health Management Through the Integration of Advanced Revitalization Technologies Utilizing Artificial Intelligence

Pollution can be broadly defined as the presence of contaminants or energy sources detrimental to ecosystems and human health. The human organism serves as a valuable indicator of ecosystem contamination. However, understanding physiological disorders and correlating specific contaminants with disease development is a complex and arduous task, necessitating extensive scientific research spanning years or even decades. To facilitate a more rapid and precise understanding of the physiological impairments induced by various contaminants, a comprehensive approach is indispensable. This review proposes a model for such an approach, which involves the systematic collection and analysis of data from ecosystem contamination monitoring, integrated with biomedical data on compromised physiological conditions in humans across different temporal and spatial scales. Given the complexity and sheer volume of data, alongside the imperative for strategic decision-making, this model leverages the capabilities of artificial intelligence (AI) tools. Although this paper exemplifies the model by investigating the effects of contaminants on the human organism, the model is adaptable to all ecosystem components, thereby supporting the conservation of plant and animal species.

Genomic Insights of Wheat Root-Associated Lysinibacillus fusiformis Reveal Its Related Functional Traits for Bioremediation of Soil Contaminated with Petroleum Products

The negative ecological impact of industrialization, which involves the use of petroleum products and dyes in the environment, has prompted research into effective, sustainable, and economically beneficial green technologies. For green remediation primarily based on active microbial metabolites, these microbes are typically from relevant sources. Active microbial metabolite production and genetic systems involved in xenobiotic degradation provide these microbes with the advantage of survival and proliferation in polluted ecological niches. In this study, we evaluated the ability of wheat root-associated L. fusiformis MGMM7 to degrade xenobiotic contaminants such as crude oil, phenol, and azo dyes. We sequenced the whole genome of MGMM7 and provided insights into the genomic structure of related strains isolated from contaminated sources. The results revealed that influenced by its isolation source, L. fusiformis MGMM7 demonstrated remediation and plant growth-promoting abilities in soil polluted with crude oil. Lysinibacillus fusiformis MGMM7 degraded up to 44.55 ± 5.47% crude oil and reduced its toxicity in contaminated soil experiments with garden cress (Lepidium sativum L.). Additionally, L. fusiformis MGMM7 demonstrated a significant ability to degrade Congo Red azo dye (200 mg/L), reducing its concentration by over 60% under both static and shaking cultivation conditions. However, the highest degradation efficiency was observed under shaking conditions. Genomic comparison among L. fusiformis strains revealed almost identical genomic profiles associated with xenobiotic assimilation. Genomic relatedness using Average Nucleotide Identity (ANI) and digital DNA-DNA hybridization (DDH) revealed that MGMM7 is distantly related to TZA38, Cu-15, and HJ.T1. Furthermore, subsystem distribution and pangenome analysis emphasized the distinctive features of MGMM7, including functional genes in its chromosome and plasmid, as well as the presence of unique genes involved in PAH assimilation, such as phnC/T/E, which is involved in phosphonate biodegradation, and nemA, which is involved in benzoate degradation and reductive degradation of N-ethylmaleimide. These findings highlight the potential properties of petroleum-degrading microorganisms isolated from non-contaminated rhizospheres and offer genomic insights into their functional diversity for xenobiotic remediation.

Revolutionizing dairy waste: emerging solutions in conjunction with microbial engineering

The dairy industry is grappling with significant challenges in managing effluent due to environmental concerns and stringent regulatory demands, necessitating innovative solutions. The paper investigates how microbial engineering is transforming the treatment of dairy wastewater, offering advanced methods to minimize environmental impact and enhance sustainability. It delves into the current challenges faced by the dairy industry, such as regulatory compliance and the limitations of traditional treatment technologies, and introduces microbial engineering as a promising solution for effluent management. Microbial engineering leverages genetic engineering techniques and microorganisms to enhance the efficiency of treatment processes like bioaugmentation and bioremediation. The environmental and economic benefits of microbial engineering, highlighting its potential to reduce pollution and lower operational costs for the dairy industry. The specific figures can vary based on factors like farm size and location, studies suggest that microbial engineering can reduce wastewater pollution by up to 50% and nutrient runoff by 30%. It also identifies key challenges and there are still areas including strains for specific pollutants (drugs, hormones), enhance degradation pathways, and increase microbes' stability (stress tolerance, long-term viability) that require further innovation to maximize its benefits. Through case studies and success stories, the paper demonstrates practical applications of microbial engineering in managing dairy effluent, illustrating how it can revolutionize industrial practices for a more sustainable future.

Sulfate-reducing consortium HQ23 stabilizes metal(loid)s and activates biological N-fixation in mixed heavy metal-contaminated soil

Sulfate-reducing bacteria (SRB) are used in the remediation of mine pollution; however, the mechanism of stabilizing multiple heavy metal(loid)s by the SRB consortium under low oxygen conditions needs further study. Indigenous microflora were extracted from non-ferrous metal-contaminated soil co-inoculated with enriched SRB consortium and assembled as the HQ23 consortium. The presence of Desulfovibrio (SRB) in HQ23 was confirmed by 16S rRNA sequencing and qPCR. The effects of culture media, dissolved oxygen (DO), SO42¯, and pH on the HQ23 growth rate, and the SO42¯-reducing activity were examined. Data indicates that the HQ23 sustained SRB function under low DO conditions (3.67 ± 0.1 mg/L), but the SRB activity was inhibited at high DO content (5.75 ± 0.39 mg/L). The HQ23 can grow from pH 5 to pH 9 and can decrease mobile or bioavailable Cr, Cu, and Zn concentrations in contaminated soil samples. FTIR revealed that Cu and Cr adsorbed to similar binding sites on bacteria, likely decreasing bacterial Cu toxicity. Increased abundances of DSV (marker for Desulfovibrio) and nifH (N-fixation) genes were observed, as well as an accumulation of nitrate-N content in soils suggesting that HQ23 stimulates the biological N-fixation in soils. This study strongly supports the future application of SRB for the bioremediation of heavy metal-polluted sites.

Metagenomic analyses of a consortium for the bioremediation of hydrocarbons polluted soils

A bacterial consortium was isolated from a soil in Noblejas (Toledo, Spain) with a long history of mixed hydrocarbons pollution, by enrichment cultivation. Serial cultures of hydrocarbons polluted soil samples were grown in a minimal medium using diesel (1 mL/L) as the sole carbon and energy source. The bacterial composition of the Noblejas Consortium (NC) was determined by sequencing 16S rRNA gene amplicon libraries. The consortium contained around 50 amplicon sequence variants (ASVs) and the major populations belonged to the genera Pseudomonas, Enterobacter, Delftia, Stenotrophomonas, Achromobacter, Acinetobacter, Novosphingobium, Allorhizobium-Neorhizobium-Rhizobium, Ochrobactrum and Luteibacter. All other genera were below 1%. Metagenomic analysis of NC has shown a high abundance of genes encoding enzymes implicated in aliphatic and (poly) aromatic hydrocarbons degradation, and almost all pathways for hydrocarbon degradation are represented. Metagenomic analysis has also allowed the construction of metagenome assembled genomes (MAGs) for the major players of NC. Metatranscriptomic analysis has shown that several of the ASVs are implicated in hydrocarbon degradation, being Pseudomonas, Acinetobacter and Delftia the most active populations.

Effect of Co-Diet Supplementation on Biodegradation of Polyethylene by Galleria mellonella L. (Lepidoptera: Pyralidae)

Pollution coming from plastic polymers, particularly polyethylene (PE), poses a serious threat to both humans and animals. The biodegradation of plastics facilitated by insects is a crucial and eco-friendly approach that can be employed to combat this global concern. Recently, the larvae of the greater wax moth Galleria mellonella (L.) have been recognized as avid 'plastivores'. The current study was aimed at evaluating the feeding efficiency of G. mellonella larvae on PEs of various densities with a co-diet supplementation of wheat germ + honey and beeswax. The results reveal that maximum PE consumption (9.98 ± 1.25 mg) was recorded in the case of 1.0 mm thick PE after a 24 h interval; however, the same scenario also achieved the greatest reduction in larval weight (27.79 ± 2.02 mg). A significant reduction in PE mass (5.87 ± 1.44 mg) was also observed in 1.0 mm PE when fed beeswax; however, the larvae experienced minimal weight loss (9.59 ± 3.81 mg). The larvae exhibited a higher PE consumption in 1.0 mm PE, indicating that the lower the density of PE, the greater the consumed area. Moreover, the biodegradation levels were notably higher within the 24 h interval. In conclusion, these findings suggest that the density of PEs and the supplementation of the co-diet have an impact on PE biodegradation. Additionally, the utilization of G. mellonella for the biodegradation of PE proves effective when combined with beeswax, resulting in minimal weight loss of the larvae. Our findings offer initial insights into how Galleria mellonella larvae biodegrade polyethylene (PE) of four different densities, along with co-diet supplementation. This approach helps us evaluate how varying densities affect degradation rates and provides a better understanding of the larvae's capabilities. Additionally, our observations at three specific time intervals (24, 48, and 72 h) allow us to identify the time required for achieving degradation rates. Through examining these time points, our method offers valuable insights into the initial phases of plastic consumption and biodegradation.

Evaluating Natural Source Zone Depletion and Enhanced Source Zone Depletion in laboratory columns via soil redox continuous sensing and microbiome characterization

To optimally employ Natural Source Zone Depletion (NSZD) and Enhanced Source Zone Depletion (ESZD) at sites impacted by light non-aqueous phase liquids (LNAPL), monitoring strategies are required. Emerging use of subsurface oxidation-reduction potential (ORP) sensors shows promise for tracking redox evolution, which reflects ongoing biogeochemical processes. However, further understanding of how soil redox dynamics relate to subsurface microbial activity and LNAPL degradation pathways is needed. In this work, soil ORP sensors and DNA and RNA sequencing-based microbiome analysis were combined to elucidate NSZD and ESZD (biostimulation via periodic sulfate addition and biosparging) processes in columns containing LNAPL-impacted soils from a former petroleum refinery. Results show expected relationships between continuous soil redox and active microbial communities. Continuous data revealed spatial and temporal detail that informed interpretation of the hydrocarbon biodegradation data. Redox increases were transient for sulfate addition, and sequencing revealed how hydrocarbon concentration and composition impacted microbiome structure and naphthalene degradation. Periodic biosparging did not result in fully aerobic conditions suggesting observed biodegradation improvements could be explained by alternative anaerobic metabolisms (e.g., iron reduction due to air oxidizing reduced iron). Collectively, data suggest combining continuous redox sensing with microbiome analysis provides insights beyond those possible with either monitoring tool alone.

Unveiling heavy metal pollution dynamics in sediments of river Ulhas, Maharashtra, India: a comprehensive analysis of anthropogenic influence, pollution indices, and health risk assessment

Metals and metalloids tainting sediments is an eminent issue, predominantly in megacities like Mumbai and Navi Mumbai, requiring an exhaustive examination to identify metal levels in river bodies that serve various populations. Thus, utilising pollution indices, multivariate analysis, and health risk assessment studies, we propose a novel investigation to examine the metal content in the Ulhas River sediments, a prominent agricultural and drinking water supply (320 million-litre per day) near Mumbai in Maharashtra, India. The eleven metals and metalloids (As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, and Zn) were examined monthly from 10 stations totaling 120 sediment specimens from October 2022 to September 2023. Investigations revealed that average values of Cr, Cu, Hg, and Ni exceeded Australian and New Zealand Environment and Conservation Council and Agriculture and Resource Management Council values, while all metals exceeded World surface rock average limits except As. Various pollution indices showed that upstream sites had none to low level contamination, whereas downstream locations had moderate to considerable contamination, suggesting anthropogenic influences. Furthermore, multivariate analysis including correlation, cluster, and principal component analysis identified that sediment pollution was mostly caused by anthropogenic activities. Lastly, health risk assessment indicated Fe was non-carcinogenic to children, whereas Cr and Ni were carcinogenic to children and adults, with children being more susceptible. Thus, from the findings of the study it is clear that, despite low to moderate pollution levels, metals may have significant repercussions, thus requiring long-term planning, frequent monitoring, and metal abatement strategies to mitigate river contamination.

Ecotoxicological effects, human and animal health risks of pollution and exposure to waste engine oils: a review

Waste engine oils are hazardous waste oils originating from the transportation sector and industrial heavy-duty machinery operations. Improper handling, disposal, and miscellaneous misuses cause significant air, soil, sediments, surface water, and groundwater pollution. Occupational exposure by prolonged and repeated contact poses direct or indirect health risks, resulting in short-term (acute) or long-term (chronic) toxicities. Soil pollution causes geotoxicity by disrupting the biocenosis and physicochemical properties of the soil, and phytotoxicity by impairing plant growth, physiology and metabolism. Surface water pollution impacts aquatic ecosystems and biodiversity. Air pollution from incineration causes the release of greenhouse gases creating global warming, noxious gases and particulate matter eliciting pulmonary disorders. The toxicity of waste engine oil is due to the total petroleum hydrocarbons (TPH) composition, including polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, xylene (BTEX), polychlorinated biphenyls (PCBs) congeners, organometallic compounds, and toxic chemical additives. The paper aims to provide a comprehensive overview of the ecotoxicological effects, human and animal health toxicology and exposure to waste engine oils. It highlights the properties and functions of engine oil and describes waste engine oil generation, disposal and recycling. It provides intensive evaluations and descriptions of the toxicokinetics, metabolism, routes of exposure and toxicosis in human and animal studies based on toxicological, epidemiological and experimental studies. It emphasises the preventive measures in occupational exposure and recommends risk-based remediation techniques to mitigate environmental pollution. The review will assist in understanding the potential risks of waste engine oil with significant consideration of the public health benefits and importance.

Enhancing soil petrochemical contaminant remediation through nutrient addition and exogenous bacterial introduction

Biostimulation (providing favorable environmental conditions for microbial growth) and bioaugmentation (introducing exogenous microorganisms) are effective approaches in the bioremediation of petroleum-contaminated soil. However, uncertainty remains in the effectiveness of these two approaches in practical application. In this study, we constructed mesocosms using petroleum hydrocarbon-contaminated soil. We compared the effects of adding nutrients, introducing exogenous bacterial degraders, and their combination on remediating petroleum contamination in the soil. Adding nutrients more effectively accelerated total petroleum hydrocarbon (TPH) degradation than other treatments in the initial 60 days' incubation. Despite both approaches stimulating bacterial richness, the community turnover caused by nutrient addition was gentler than bacterial degrader introduction. As TPH concentrations decreased, we observed a succession in microbial communities characterized by a decline in copiotrophic, fast-growing bacterial r-strategists with high rRNA operon (rrn) copy numbers. Ecological network analysis indicated that both nutrient addition and bacterial degrader introduction enhanced the complexity and stability of bacterial networks. Compared to the other treatment, the bacterial network with nutrient addition had more keystone species and a higher proportion of negative associations, factors that may enhance microbial community stability. Our study demonstrated that nutrient addition effectively regulates community succession and ecological interaction to accelerate the soil TPH degradation.

Insights into the characteristics of changes in dissolved organic matter fluorescence components on the natural attenuation process of toluene

Natural attenuation (NA) is of great significance for the remediation of contaminated groundwater, and how to identify NA patterns of toluene in aquifers more quickly and effectively poses an urgent challenge. In this study, the NA of toluene in two typical soils was conducted by means of soil column experiment. Based on column experiments, dissolved organic matter (DOM) was rapidly identified using fluorescence spectroscopy, and the relationship between DOM and the NA of toluene was established through structural equation modeling analysis. The adsorption rates of toluene in clay and sandy soil were 39 % and 26 %, respectively. The adsorption capacity and total NA capacity of silty clay were large. The occurrence of fluorescence peaks of protein-like components and specific products indicated the occurrence of biodegradation. Arenimonas, Acidovorax and Brevundimonas were the main degrading bacteria identified in Column A, while Pseudomonas, Azotobacter and Mycobacterium were the main ones identified in Column B. The pH, ORP, and Fe(II) were the most important factors affecting the composition of microbial communities, which in turn affected the NA of toluene. These results provide a new way to quickly identify NA of toluene.

Advances in 3D bioprinting for environmental remediation and hazardous materials treatment

The high-throughput method based on the micron-level structure that 3D bioprinting technology offers for various environmental microbiological engineering applications is made possible by its several printing paths and precision programming control. This versatility makes it an on-demand manufacturing technology. A novel 3D manufacturing technique called 3D bioprinting may be used to precisely uptake and disperse bacteria to create microbial active substances with a variety of intricate functionalities for environmental applications. The technological challenges that the current 3D bioprinting technology must face include the mechanical properties of materials, the creation of specific bioinks to adapt to different strains, and the exploration of 4D bioprinting for intelligent applications. Therefore, this analysis delves deeply into the core technological ideas of 3D bioprinting, bioink materials, and their environmental applications. It also offers recommendations about the challenges and opportunities associated with 3D bioprinting. Combined with the present advancements in microbe enhancement technology, 3D bioprinting will provide an enabling platform for multifunctional microorganisms and facilitate the management of in situ directional responses in the environmental domain. This review highlights the applications of 3D bioprinting in the environmental monitoring and bioremediation. 3D printing in solid waste management is also discussed in detail.

Phytoremediation of mercury-contaminated Soil by Vigna radiata L. plant in companion with bacterial and fungal biofertilizers

Mercury is one of the most toxic pollutants that has drawn the attention of scientists. This study investigates the phytoremediation capabilities of Vigna radiata L. in conjunction with microbial biostimulators. The inoculated seeds were cultivated in soil under controlled greenhouse conditions. The concentration of Hg, biomass, and photosynthetic pigments was investigated under amendment factor including EDTA, bacterial, fungal (Mycorrhiza and Trichoderma), biochar, and combined levels, as well as the pollution factor with three levels of HgCl2 as two factorial experiments. Results showed that Plant Growth-Promoting Microorganisms (PGPMs) influenced mercury absorption and distribution in different plant organs. Aside from biochar, all stimulators increased the plant's Hg concentration. Although EDTA greatly increased mercury accumulation in plants, it reduced biomass. Fungal and bacterial treatments increased total mercury in the plant but decreased its concentration in the leaves. The combination of bacteria and fungi resulted in the highest mercury absorption, while the biochar in combination with PGPMs produced the greatest biomass. Analysis of mercury concentration in seeds indicated that V radiata effectively prevented its contamination in seeds. The results disclosed that microbial combinations of bacteria and fungi could increase the plant's potential to cope with heavy metal pollution. This improvement is due to the different roles of these two organisms, like nitrogen fixation by bacteria and phosphorus absorption by mycorrhiza fungi. Moreover, biochar as a soil amendment and microorganism carrier was noticed. Finally, considering the plant's inherent capacity to stabilize mercury in the roots, phytostabilization with the benefit of combined levels of biochar and microorganisms can be introduced as the best approach.

Microbes' role in environmental pollution and remediation: a bioeconomy focus approach

Bioremediation stands as a promising solution amid the escalating challenges posed by environmental pollution. Over the past 25 years, the influx of synthetic chemicals and hazardous contaminants into ecosystems has required innovative approaches for mitigation and restoration. The resilience of these compounds stems from their non-natural existence, distressing both human and environmental health. Microbes take center stage in this scenario, demonstrating their ability of biodegradation to catalyze environmental remediation. Currently, the scientific community supports a straight connection between biorefinery and bioremediation concepts to encourage circular bio/economy practices. This review aimed to give a pre-overview of the state of the art regarding the main microorganisms employed in bioremediation processes and the different bioremediation approaches applied. Moreover, focus has been given to the implementation of bioremediation as a novel approach to agro-industrial waste management, highlighting how it is possible to reduce environmental pollution while still obtaining value-added products with commercial value, meeting the goals of a circular bioeconomy. The main drawbacks and challenges regarding the feasibility of bioremediation were also reported.

Microbial biosurfactants: Green alternatives and sustainable solution for augmenting pesticide remediation and management of organic waste

Pesticide pollution remains a significant environmental challenge, necessitating the exploration of sustainable alternatives. Biosurfactants are a class of unconventional surface-active chemicals that are produced by microorganisms. Biosurfactants have many applications in treating oil spills, emulsifiers, pharmaceuticals, and agriculture. Compared to chemical surfactants, they have benefits such as biodegradability, less toxicity, and a greener option because they are derived from microbes. Biosurfactants have recently been shown to have the potential to speed up pesticide cleanup. Biosurfactants are used in pesticide remediation because of their exceptional foaming ability, high selectivity, and wide range of pH, salinity, and temperature operating windows. Microbial biosurfactants emerged as potential agents for the treatment of organic waste and agricultural residue. This review unfolds the promising realm of microbial biosurfactants as green solutions for environmental sustainability, particularly in agricultural practices, with special reference to pesticide remediation. This article highlights the escalating need for eco-friendly alternatives, paving the way for discussing biosurfactants. Moreover, the articles discuss in detail various advancements in the field of rapid screening of biosurfactants, either using a conventional approach or via advanced instruments such as GC-MS, HPLC, NMR, FTIR, etc. Furthermore, the article unveils the molecular mechanisms and the microbial genes driving biosurfactant synthesis, offering insights into enhancing production efficiency. Moreover, the article explores diverse applications of microbial biosurfactants in sustainable agriculture, ranging from soil remediation to crop protection. The article also highlights the various functions of microbial biosurfactants for enhancing the decomposition and recycling of organic waste and agricultural residues, emphasizing their potential for sustainable waste management strategies. Overall, the review underscores the pivotal role of microbial biosurfactants as green alternatives for addressing pesticide pollution and advancing environmental sustainability.

Bioprospecting of extremophilic perchlorate-reducing bacteria: report of promising Bacillus spp. isolated from sediments of the bay of Cartagena, Colombia

Three extremophile bacterial strains (BBCOL-009, BBCOL-014 and BBCOL-015), capable of degrading high concentrations of perchlorate at a range of pH (6.5 to 10.0), were isolated from Colombian Caribbean Coast sediments. Morphological features included Gram negative strain bacilli with sizes averaged of 1.75 × 0.95, 2.32 × 0.65 and 3.08 × 0.70 μm, respectively. The reported strains tolerate a wide range of pH (6.5 to 10.0); concentrations of NaCl (3.5 to 7.5% w/v) and KClO4- (250 to 10000 mg/L), reduction of KClO4- from 10 to 25%. LB broth with NaCl (3.5-30% w/v) and KClO4- (250-10000 mg/L) were used in independent trials to evaluate susceptibility to salinity and perchlorate, respectively. Isolates increased their biomass at 7.5 % (w/v) NaCl with optimal development at 3.5 % NaCl. Subsequently, ClO4- reduction was assessed using LB medium with 3.5% NaCl and 10000 mg/L ClO4-. BBCOL-009, BBCOL-014 and BBCOL-015 achieved 10%, 17%, and 25% reduction of ClO4-, respectively. The 16 S rRNA gene sequence grouped them as Bacillus flexus T6186-2, Bacillus marisflavi TF-11 (T), and Bacillus vietnamensis 15 - 1 (T) respectively, with < 97.5% homology. In addition, antimicrobial resistance to ertapenem, vancomycine, amoxicillin clavulanate, penicillin, and erythromycin was present in all the isolates, indicating their high adaptability to stressful environments. The isolated strains from marine sediments in Cartagena Bay, Colombia are suitable candidates to reduce perchlorate contamination in different environments. Although the primary focus of the study of perchlorate-reducing and resistant bacteria is in the ecological and agricultural realms, from an astrobiological perspective, perchlorate-resistant bacteria serve as models for astrobiological investigations.

Unravelling biosynthesis and biodegradation potentials of microbial dark matters in hypersaline lakes

Biosynthesis and biodegradation of microorganisms critically underpin the development of biotechnology, new drugs and therapies, and environmental remediation. However, most uncultured microbial species along with their metabolic capacities in extreme environments, remain obscured. Here we unravel the metabolic potential of microbial dark matters (MDMs) in four deep-inland hypersaline lakes in Xinjiang, China. Utilizing metagenomic binning, we uncovered a rich diversity of 3030 metagenome-assembled genomes (MAGs) across 82 phyla, revealing a substantial portion, 2363 MAGs, as previously unclassified at the genus level. These unknown MAGs displayed unique distribution patterns across different lakes, indicating a strong correlation with varied physicochemical conditions. Our analysis revealed an extensive array of 9635 biosynthesis gene clusters (BGCs), with a remarkable 9403 being novel, suggesting untapped biotechnological potential. Notably, some MAGs from potentially new phyla exhibited a high density of these BGCs. Beyond biosynthesis, our study also identified novel biodegradation pathways, including dehalogenation, anaerobic ammonium oxidation (Anammox), and degradation of polycyclic aromatic hydrocarbons (PAHs) and plastics, in previously unknown microbial clades. These findings significantly enrich our understanding of biosynthesis and biodegradation processes and open new avenues for biotechnological innovation, emphasizing the untapped potential of microbial diversity in hypersaline environments.

Multi-omics association study of hexadecane degradation in haloarchaeal strain Halogranum rubrum RO2-11

Haloarchaea with the capacity to degrade alkanes is promising to deal with petroleum pollution in hypersaline environments. However, only a limited number of haloarchaeal species are investigated, and their pathway and mechanism for alkane degradation remain unclear. In this study, Halogranum rubrum RO2-11, a haloarchaeal strain, verified the ability to degrade kerosene and hexadecane in 184 g/L NaCl, with 53% and 52% degradation rates after 9 and 4 days, respectively. Genome sequencing and gene annotation indicated that strain RO2-11 possesses a complete potential alkane-degrading pathway, of which alkane hydroxylases may include CYP450, AlmA, and LadA. Transcriptome and metabolome analyses revealed that the upregulation of related genes in TCA cycle, lysine biosynthesis, and acetylation may help improve hexadecane degradation. Additionally, an alternative degrading pathway of hexadecane based on dual-terminal β-oxidation may occur in strain RO2-11. It is likely to be the first report of alkane degradation by the genus Halogranum, which may be helpful for applications of oil-pollution bioremediation under high-salt conditions.

Nano-biogenic heavy metals adsorptive remediation for enhanced soil health and sustainable agricultural production

Hazardous heavy metal (HM) pollution constitutes a pervasive global challenge, posing substantial risks to ecosystems and human health. The exigency for expeditious detection, meticulous monitoring, and efficacious remediation of HM within ecosystems is indisputable. Soil contamination, stemming from a myriad of anthropogenic activities, emerges as a principal conduit for HM ingress into the food chain. Traditional soil remediation modalities for HM elimination, while effective are labor-intensive, susceptible to secondary contamination, and exhibit limited efficacy in regions characterized by low metal toxicity. In response to these exigencies, the eco-friendly paradigm of bioremediation has garnered prominence as a financially judicious and sustainable remedial strategy. This approach entails the utilization of hyperaccumulators, Genetically Modified Microorganisms (GMM), and advantageous microbes. The current review offers a comprehensive elucidation of cutting-edge phyto/microbe-based bioremediation techniques, with a specific emphasis on their amalgamation with nanotechnology. Accentuating their pivotal role in advancing sustainable agricultural practices, the review meticulously dissects the synergistic interplay between plants and microbes, underscoring their adeptness in HM remediation sans secondary contamination. Moreover, the review scrutinizes the challenges intrinsic to implementing bioremediation-nanotechnology interface techniques and propounds innovative resolutions. These discernments proffer auspicious trajectories for the future of agriculture. Through the environmentally conscientious marvels of phyto/microbe bioremediation, an optimistic outlook emerges for environmental preservation and the cultivation of a sustainable, salubrious planet via the conduit of cleaner agricultural production.

Halophilic archaea as tools for bioremediation technologies

Haloarchaea are extremophilic microorganisms belonging to the Archaea domain that require high salt concentrations to be alive, thus inhabiting ecosystems like salty ponds, salty marshes, or extremely salty lagoons. They are more abundantly and widely distributed worldwide than initially expected. Most of them are grouped into two families: Halobacteriaceae and Haloferacaceae. The extreme conditions under which haloarchaea survive contribute to their metabolic and molecular adaptations, thus making them good candidates for the design of bioremediation strategies to treat brines, salty water, and saline soils contaminated with toxic compounds such as nitrate, nitrite, oxychlorates such as perchlorate and chlorate, heavy metals, hydrocarbons, and aromatic compounds. New advances in understanding haloarchaea physiology, metabolism, biochemistry, and molecular biology suggest that biochemical pathways related to nitrogen and carbon, metals, hydrocarbons, or aromatic compounds can be used for bioremediation proposals. This review analyses the novelty of the most recent results showing the capability of some haloarchaeal species to assimilate, modify, or degrade toxic compounds for most living beings. Several examples of the role of these microorganisms in the treatment of polluted brine or salty soils are also discussed in connection with circular economy-based processes. KEY POINTS: • Haloarchaea are extremophilic microorganisms showing genuine metabolism • Haloarchaea can metabolise compounds that are highly toxic to most living beings • These metabolic capabilities are useful for designing soil and water bioremediation strategies.

Polycyclic aromatic hydrocarbon: underpinning the contribution of specialist microbial species to contaminant mitigation in the soil

The persistence of PAHs poses a significant challenge for conventional remediation approaches, necessitating the exploration of alternative, sustainable strategies for their mitigation. This review underscores the vital role of specialized microbial species (nitrogen-fixing, phosphate-solubilizing, and biosurfactant-producing bacteria) in tackling the environmental impact of polycyclic aromatic hydrocarbons (PAHs). These resistant compounds demand innovative remediation strategies. The study explores microbial metabolic capabilities for converting complex PAHs into less harmful byproducts, ensuring sustainable mitigation. Synthesizing literature from 2016 to 2023, it covers PAH characteristics, sources, and associated risks. Degradation mechanisms by bacteria and fungi, key species, and enzymatic processes are examined. Nitrogen-fixing and phosphate-solubilizing bacteria contributions in symbiotic relationships with plants are highlighted. Biosurfactant-producing bacteria enhance PAH solubility, expanding microbial accessibility for degradation. Cutting-edge trends in omics technologies, synthetic biology, genetic engineering, and nano-remediation offer promising avenues. Recommendations emphasize genetic regulation, field-scale studies, sustainability assessments, interdisciplinary collaboration, and knowledge dissemination. These insights pave the way for innovative, sustainable PAH-contaminated environment restoration.

Comparative Bioremediation of Tetradecane, Cyclohexanone and Cyclohexane by Filamentous Fungi from Polluted Habitats in Kazakhstan

Studying the fates of oil components and their interactions with ecological systems is essential for developing comprehensive management strategies and enhancing restoration following oil spill incidents. The potential expansion of Kazakhstan's role in the global oil market necessitates the existence of land-specific studies that contribute to the field of bioremediation. In this study, a set of experiments was designed to assess the growth and biodegradation capacities of eight fungal strains sourced from Kazakhstan soil when exposed to the hydrocarbon substrates from which they were initially isolated. The strains were identified as Aspergillus sp. SBUG-M1743, Penicillium javanicum SBUG-M1744, SBUG-M1770, Trichoderma harzianum SBUG-M1750 and Fusarium oxysporum SBUG-1746, SBUG-M1748, SBUG-M1768 and SBUG-M1769 using the internal transcribed spacer (ITS) region. Furthermore, microscopic and macroscopic evaluations agreed with the sequence-based identification. Aspergillus sp. SBUG-M1743 and P. javanicum SBUG-M1744 displayed remarkable biodegradation capabilities in the presence of tetradecane with up to a 9-fold biomass increase in the static cultures. T. harzianum SBUG-M1750 exhibited poor growth, which was a consequence of its low efficiency of tetradecane degradation. Monocarboxylic acids were the main degradation products by SBUG-M1743, SBUG-M1744, SBUG-M1750, and SBUG-M1770 indicating the monoterminal degradation pathway through β-oxidation, while the additional detection of dicarboxylic acid in SBUG-M1768 and SBUG-M1769 cultures was indicative of the fungus' ability to undertake both monoterminal and diterminal degradation pathways. F. oxysporum SBUG-M1746 and SBUG-M1748 in the presence of cyclohexanone showed a doubling of the biomass with the ability to degrade the substrate almost completely in shake cultures. F. oxysporum SBUG-M1746 was also able to degrade cyclohexane completely and excreted all possible metabolites of the degradation pathway. Understanding the degradation potential of these fungal isolates to different hydrocarbon substrates will help in developing effective bioremediation strategies tailored to local conditions.

Enhancing biodegradation of vegetable oil-contaminated soil with soybean texturized waste, spent mushroom substrate, and stabilized poultry litter in microcosm systems

Industrial activities contribute to environmental pollution, particularly through unregulated effluent discharges, causing adverse effects on ecosystems. Vegetable oils, as insoluble substances, exacerbate this pollution, forming impermeable films and affecting the oxygen transfer, leading to serious habitat disruption. Organic wastes, such as soybean texturized waste, spent mushroom substrate, and stabilized poultry litter, were assessed for their efficacy in enhancing the degradation of vegetable oil in contaminated soil. For this purpose, contaminated soil was amended with each of the wastes (10% w/w) using microcosm systems, which were monitored physico-chemically, microbiologically and toxicologically. Results indicate that the wastes promoted significant oil degradation, achieving 83.1, 90.7, and 86.2% removal for soybean texturized waste, spent mushroom substrate, and stabilized poultry litter, respectively, within a 90-day period. Additionally, they positively influenced soil microbial activity, as evidenced by increased levels of culturable microorganisms and hydrolytic microbial activity. While bioassays indicated no phytotoxicity in most cases, soybean texturized waste exhibited inhibitory effects on seed germination and root elongation of Lactuca sativa. This study significantly enhances our comprehension of remediation techniques for sites tainted with vegetable oils, highlighting the critical role of organic waste as eco-friendly agents in soil restoration. Emphasizing the practical implications of these findings is imperative to underscore the relevance and urgency of addressing vegetable oil contamination in soil. Moving forward, tailored strategies considering both contaminant characteristics and soil ecosystem traits are vital for ensuring effective and sustainable soil remediation.

Differences among active toluene-degrading microbial communities in farmland soils with different levels of heavy metal pollution

Heavy metals can severely influence the mineralisation of organic pollutants in a compound-polluted environment. However, to date, no study has focused on the effects of heavy metals on the active organic pollutant-degrading microbial communities to understand the bioremediation mechanism. In this study, toluene was used as the model organic pollutant to explore the effects of soils with different levels of heavy metal pollution on organic contaminant degradation in the same area via stable isotope probing (SIP) and 16 S rRNA high-throughput sequencing. Heavy metals can seriously affect toluene biodegradation and regulate the abundance and diversity of microbial communities. SIP revealed a drastic difference in the community structure of active toluene degraders between the unpolluted and heavy metal-polluted soils. All SIP-identified degraders were assigned to nine bacterial classes, among which Alphaproteobacteria, Gammaproteobacteria, and Bacilli were shared by both treatments. Among all active degraders, Nitrospira, Nocardioides, Conexibacteraceae, and Singulisphaera were linked to toluene biodegradation for the first time. Notably, the type of active degrader and microbial diversity were strongly related to biodegradation efficiency, indicating their key role in toluene biodegradation. Overall, heavy metals can affect the microbial diversity and alter the functional microbial communities in soil, thereby influencing the removal efficiency of organic contaminants. Our findings provide novel insights into the biodegradation mechanism of organic pollutants in heavy metal-polluted soils and highlight the biodiversity of microbes involved in toluene biodegradation in compound-polluted environments.

Perspectives of pteridophytes microbiome for bioremediation in agricultural applications

The microbiome is the synchronised congregation of millions of microbial cells in a particular ecosystem. The rhizospheric, phyllospheric, and endospheric microbial diversity of lower groups of plants like pteridophytes, which includes the Ferns and Fern Allies, have also given numerous alternative opportunities to achieve greener and sustainable agriculture. The broad-spectrum bioactivities of these microorganisms, including bioremediation of heavy metals (HMs) in contaminated soil, have been drawing the attention of agricultural researchers for the preparation of bioformulations for applications in climate-resilient and versatile agricultural production systems. Pteridophytes have an enormous capacity to absorb HMs from the soil. However, their direct application in the agricultural field for HM absorption seems infeasible. At the same time, utilisation of Pteridophyte-associated microbes having the capacity for bioremediation have been evaluated and can revolutionise agriculture in mining and mineral-rich areas. In spite of the great potential, this group of microbiomes has been less studied. Under these facts, this prospective review was carried out to summarise the basic and applied research on the potential of Pteridophyte microbiomes for soil bioremediation and other agricultural applications globally. Gaps have also been indicated to present scopes for future research programmes.

Biodegradation of phenolic pollutants and bioaugmentation strategies: A review of current knowledge and future perspectives

The widespread use of phenolic compounds renders their occurrence in various environmental matrices, posing ecological risks especially the endocrine disruption effects. Biodegradation-based techniques are efficient and cost-effective in degrading phenolic pollutants with less production of secondary pollution. This review focuses on phenol, 4-nonylphenol, 4-nitrophenol, bisphenol A and tetrabromobisphenol A as the representatives, and summarizes the current knowledge and future perspectives of their biodegradation and the enhancement strategy of bioaugmentation. Biodegradation and isolation of degrading microorganisms were mainly investigated under oxic conditions, where phenolic pollutants are typically hydroxylated to 4-hydroxybenzoate or hydroquinone prior to ring opening. Bioaugmentation efficiencies of phenolic pollutants significantly vary under different application conditions (e.g., increased degradation by 10-95% in soil and sediment). To optimize degradation of phenolic pollutants in different matrices, the factors that influence biodegradation capacity of microorganisms and performance of bioaugmentation are discussed. The use of immobilization strategy, indigenous degrading bacteria, and highly competent exogenous bacteria are proposed to facilitate the bioaugmentation process. Further studies are suggested to illustrate 1) biodegradation of phenolic pollutants under anoxic conditions, 2) application of microbial consortia with synergistic effects for phenolic pollutant degradation, and 3) assessment on the uncertain ecological risks associated with bioaugmentation, resulting from changes in degradation pathway of phenolic pollutants and alterations in structure and function of indigenous microbial community.

The bioremediation of the typical persistent organic pollutants (POPs) by microalgae-bacteria consortia: A systematic review

With industrialisation and the rapidly growing agricultural demand, many organic compounds have been leaked into the environment, causing serious damage to the biosphere. Persistent organic pollutants (POPs) are a type of toxic chemicals that are resistant to degradation through normal chemical, biological or photolytic approaches. With their stable chemical structures, POPs can be accumulated in the environment, and transported through wind and water, causing global environmental issues. Many researches have been conducted to remediate POPs contamination using various kinds of biological methods, and significant results have been seen. Microalgae-bacteria consortium is a newly developed concept for biological technology in contamination treatment, with the synergetic effects between microalgae and bacteria, their potential for pollutants degradation can be further released. In this review, two types of POPs (polychlorinated biphenyls and polycyclic aromatic hydrocarbons) are selected as the targeted pollutants to give a systematic analysis of the biodegradation through microalgae and bacteria, including the species selection, the identification of dominant enzymes, as well as the real application performance of the consortia. In the end, some outlooks and suggestions are given to further guide the development of applying microalgae-bacteria consortia in remediating POPs contamination. In general, the coculturing of microalgae and bacteria is a novel and efficient way to fulfil the advanced treatment of POPs in soil or liquid phase, and both monooxygenase and dioxygenase belonging to oxygenase play a vital role in the biodegradation of PCBs and PAHs. This review provides a general guide in the future investigation of biological treatment of POPs.

Plant Growth-Promoting Rhizobacteria (PGPR) Assisted Bioremediation of Heavy Metal Toxicity

Due to a variety of natural and anthropogenic processes, heavy metal toxicity of soil constitutes a substantial hazard to all living beings in the environment. The heavy metals alter the soil properties, which directly or indirectly influence the agriculture systems. Thus, plant growth-promoting rhizobacteria (PGPR)-assisted bioremediation is a promising, eco-friendly, and sustainable method for eradicating heavy metals. PGPR cleans up the heavy metal-contaminated environment using various approaches including efflux systems, siderophores and chelation, biotransformation, biosorption, bioaccumulation, precipitation, ACC deaminase activity, biodegradation, and biomineralization methods. These PGPRs have been found effective to bioremediate the heavy metal-contaminated soil through increased plant tolerance to metal stress, improved nutrient availability in soil, alteration of heavy metal pathways, and by producing some chemical compounds like siderophores and chelating ions. Many heavy metals are non-degradable; hence, another remediation approach with a broader scope of contamination removal is needed. This article also briefly emphasized the role of genetically modified PGPR strains which improve the soil's degradation rate of heavy metals. In this regard, genetic engineering, a molecular approach, could improve bioremediation efficiency and be helpful. Thus, the ability of PGPRs can aid in heavy metal bioremediation and promote a sustainable agricultural soil system.

Characterization and identification of long-chain hydrocarbon-degrading bacterial communities in long-term chronically polluted soil in Ogoniland: an integrated approach using culture-dependent and independent methods

Escalating oil consumption has resulted in an increase in accidental spills of petroleum hydrocarbons, causing severe environmental degradation, notably in vulnerable regions like the Niger Delta. Complex mixture of these hydrocarbons particularly long-chain alkanes presents unique challenges in restoration of polluted environment due to their chemical properties. This study aimed to investigate the long-chain hydrocarbon-degrading bacterial communities within long-term chronically polluted soil in Ogoniland, by utilizing both traditional cultivation methods and modern culture-independent techniques. Results revealed that surface-polluted soil (SPS) and subsurface soil (SPSS) exhibit significantly higher total organic carbon (TOC) ranging from 5.64 to 5.06% and total petroleum hydrocarbons (TPH) levels ranging from 36,775 ppm to 14,087 ppm, compared to unpolluted soil (UPS) with 1.97% TOC and 479 ppm TPH, respectively. Analysis of carbon chain lengths reveals the prevalence of longer-chain alkanes (C20-28) in the surface soil. Culture-dependent methods, utilizing crude oil enrichment (COE) and paraffin wax enrichment (PWE), yield 47 bacterial isolates subjected to a long-chain alkane degradation assay. Twelve bacterial strains demonstrate significant degradation abilities across all enriched media. Three bacterial members, namely Pseudomonas sp. (almA), Marinomonas sp. (almA), and Alteromonas (ladA), exhibit genes responsible for long-chain alkane degradation, demonstrating efficiency between 50 and 80%. Culture-independent analysis reveals that surface SPS samples exhibit greater species richness and diversity compared to subsurface SPSS samples. Proteobacteria dominates as the phylum in both soil sample types, ranging from 22.23 to 82.61%, with Firmicutes (0.2-2.22%), Actinobacteria (0.4-3.02%), and Acidobacteria (0.1-3.53%) also prevalent. Bacterial profiles at genus level revealed that distinct variations among bacterial populations between SPS and SPSS samples comprising number of hydrocarbon degraders and the functional predictions also highlight the presence of potential catabolic genes (nahAa, adh2, and cpnA) in the polluted soil. However, culture-dependent analysis only captured a few of the dominant members found in culture-independent analysis, implying that more specialized media or environments are needed to isolate more bacterial members. The findings from this study contribute valuable information to ecological and biotechnological aspects, aiding in the development of more effective bioremediation applications for restoring oil-contaminated environments.

Microbial assisted multifaceted amelioration processes of heavy-metal remediation: a clean perspective toward sustainable and greener future

Rapidly increasing heavy metal waste has adversely affected the environment and the Earth's health. The lack of appropriate remediation technologies has worsened the issue globally, especially in developing countries. Heavy-metals contaminants have severely impacted the environment and led to devastating conditions owing to their abundance and reactivity. As they are nondegradable, the potential risk increases even at a low concentration. However, heavy-metal remediation has increased with the up-gradation of technologies and integration of new approaches. Also, of all the treatment methodologies, microbial-assisted multifaceted approach for ameliorating heavy metals is a promising strategy for propagating the idea of a green and sustainable environment with minimal waste aggregation. Microbial remediation combined with different biotechniques could aid in unraveling new methods for eradicating heavy metals. Thus, the present review focuses on various microbial remediation approaches and their affecting factors, enabling recapitulation of the interplay between heavy-metals ions and microorganisms. Additionally, heavy-metals remediation mechanisms adapted by microorganisms, the role of genetically modified (GM) microorganisms, life cycle assessment (LCA), techno-economic assessment (TEA) limitations, and prospects of microbial-assisted amelioration of heavy-metals have been elaborated in the current review with focus toward "sustainable and greener future."

Biosorption of arsenic (III) from aqueous solution using calcium alginate immobilized dead biomass of Acinetobacter sp. strain Sp2b

This study presents a novel biosorbent developed by immobilizing dead Sp2b bacterial biomass into calcium alginate (CASp2b) to efficiently remove arsenic (AsIII) from contaminated water. The bacterium Sp2b was isolated from arsenic-contaminated industrial soil of Punjab, a state in India. The strain was designated Acinetobacter sp. strain Sp2b as per the 16S rDNA sequencing, GenBank accession number -OP010048.The CASp2b was used for the biosorption studies after an initial screening for the biosorption capacity of Sp2b biomass with immobilized biomass in both live and dead states. The optimum biosorption conditions were examined in batch experimentations with contact time, pH, biomass, temperature, and AsIII concentration variables. The maximum biosorption capacity (qmax = 20.1 ± 0.76 mg/g of CA Sp2b) was obtained at pH9, 35 ̊ C, 20 min contact time, and 120 rpm agitation speed. The isotherm, kinetic and thermodynamic modeling of the experimental data favored Freundlich isotherm (R2 = 0.941) and pseudo-2nd-order kinetics (R2 = 0.968) with endothermic nature (ΔH° = 27.42) and high randomness (ΔS° = 58.1).The scanning electron microscopy with energy dispersive X-ray (SEM-EDX) analysis indicated the As surface binding. The reusability study revealed the reasonable usage of beads up to 5 cycles. In conclusion, CASp2b is a promising, efficient, eco-friendly biosorbent for AsIII removal from contaminated water.

In vitro and in vivo screening of bacterial species from contaminated soil for heavy metal biotransformation activity

Heavy metals (HMs) are widely used in various industries. High concentrations of HMs can be severely toxic to plants, animals and humans. Microorganism-based bioremediation has shown significant potential in degrading and detoxifying specific HM contaminants. In this study, we cultivated a range of bacterial strains in liquid and solid nutrient medium containing different concentrations of different HMs to select and analyze bacteria capable of transforming HMs. The bacterial strains most resistant to selected HMs and exhibiting the ability to remove HMs from contaminated soils were identified. Then, the bacterial species capable of utilizing HMs in soil model experiments were selected, and their ability to transform HMs was evaluated. This study has also generated preliminary findings on the use of plants for further removal of HMs from soil after microbial bioremediation. Alcaligenes faecalis, Delftia tsuruhatensis and Stenotrophomonas sp. were selected for their ability to grow in and utilize HM ions at the maximum permissible concentration (MPC) and two times the MPC. Lysinibacillus fusiformis (local microflora) can be used as a universal biotransformation tool for many HM ions. Brevibacillus parabrevis has potential for the removal of lead ions, and Brevibacillus reuszeri and Bacillus safensis have potential for the removal of arsenic ions from the environment. The bacterial species have been selected for bioremediation to remove heavy metal ions from the environment.

Promoting sustainable agriculture by exploiting plant growth-promoting rhizobacteria (PGPR) to improve maize and cowpea crops

Maize and cowpea are among the staple foods most consumed by most of the African population, and are of significant importance in food security, crop diversification, biodiversity preservation, and livelihoods. In order to satisfy the growing demand for agricultural products, fertilizers and pesticides have been extensively used to increase yields and protect plants against pathogens. However, the excessive use of these chemicals has harmful consequences on the environment and also on public health. These include soil acidification, loss of biodiversity, groundwater pollution, reduced soil fertility, contamination of crops by heavy metals, etc. Therefore, essential to find alternatives to promote sustainable agriculture and ensure the food and well-being of the people. Among these alternatives, agricultural techniques that offer sustainable, environmentally friendly solutions that reduce or eliminate the excessive use of agricultural inputs are increasingly attracting the attention of researchers. One such alternative is the use of beneficial soil microorganisms such as plant growth-promoting rhizobacteria (PGPR). PGPR provides a variety of ecological services and can play an essential role as crop yield enhancers and biological control agents. They can promote root development in plants, increasing their capacity to absorb water and nutrients from the soil, increase stress tolerance, reduce disease and promote root development. Previous research has highlighted the benefits of using PGPRs to increase agricultural productivity. A thorough understanding of the mechanisms of action of PGPRs and their exploitation as biofertilizers would present a promising prospect for increasing agricultural production, particularly in maize and cowpea, and for ensuring sustainable and prosperous agriculture, while contributing to food security and reducing the impact of chemical fertilizers and pesticides on the environment. Looking ahead, PGPR research should continue to deepen our understanding of these microorganisms and their impact on crops, with a view to constantly improving sustainable agricultural practices. On the other hand, farmers and agricultural industry players need to be made aware of the benefits of PGPRs and encouraged to adopt them to promote sustainable agricultural practices.

AI-assisted systematic review on remediation of contaminated soils with PAHs and heavy metals

This systematic review addresses soil contamination by crude oil, a pressing global environmental issue, by exploring effective treatment strategies for sites co-contaminated with heavy metals and polycyclic aromatic hydrocarbons (PAHs). Our study aims to answer pivotal research questions: (1) What are the interaction mechanisms between heavy metals and PAHs in contaminated soils, and how do these affect the efficacy of different remediation methods? (2) What are the challenges and limitations of combined remediation techniques for co-contaminated soils compared to single-treatment methods in terms of efficiency, stability, and specificity? (3) How do various factors influence the effectiveness of biological, chemical, and physical remediation methods, both individually and combined, in co-contaminated soils, and what role do specific agents play in the degradation, immobilization, or removal of heavy metals and PAHs under diverse environmental conditions? (4) Do AI-powered search tools offer a superior alternative to conventional search methodologies for executing an exhaustive systematic review? Utilizing big-data analytics and AI tools such as Litmaps.co, ResearchRabbit, and MAXQDA, this study conducts a thorough analysis of remediation techniques for soils co-contaminated with heavy metals and PAHs. It emphasizes the significance of cation-π interactions and soil composition in dictating the solubility and behavior of these pollutants. The study pays particular attention to the interplay between heavy metals and PAH solubility, as well as the impact of soil properties like clay type and organic matter on heavy metal adsorption, which results in nonlinear sorption patterns. The research identifies a growing trend towards employing combined remediation techniques, especially biological strategies like biostimulation-bioaugmentation, noting their effectiveness in laboratory settings, albeit with potentially higher costs in field applications. Plants such as Medicago sativa L. and Solanum nigrum L. are highlighted for their effectiveness in phytoremediation, working synergistically with beneficial microbes to decompose contaminants. Furthermore, the study illustrates that the incorporation of biochar and surfactants, along with chelating agents like EDTA, can significantly enhance treatment efficiency. However, the research acknowledges that varying environmental conditions necessitate site-specific adaptations in remediation strategies. Life Cycle Assessment (LCA) findings indicate that while high-energy methods like Steam Enhanced Extraction and Thermal Resistivity - ERH are effective, they also entail substantial environmental and financial costs. Conversely, Natural Attenuation, despite being a low-impact and cost-effective option, may require prolonged monitoring. The study advocates for an integrative approach to soil remediation, one that harmoniously balances environmental sustainability, cost-effectiveness, and the specific requirements of contaminated sites. It underscores the necessity of a holistic strategy that combines various remediation methods, tailored to meet both regulatory compliance and the long-term sustainability of decontamination efforts.

The optimization of poly(vinyl)-alcohol-alginate beads with a slow-release compound for the aerobic cometabolism of chlorinated aliphatic hydrocarbons

Chlorinated aliphatic hydrocarbons (CAHs), such as cis-1,2-dichloroethylene (cDCE), are prevalent in groundwater at many locations throughout the United States. When immobilized in hydrogel beads with slow-release compounds, the bacteria strain Rhodococcus rhodochrous ATCC 21198 can be used for the in situ bioremediation of cDCE. These hydrogel beads must exhibit high mechanical strength and resist degradation to extend the lifetime of slow-release compounds and bioremediation. We engineered poly(vinyl)-alcohol - alginate (PVA-AG) beads to immobilize ATCC 21198 with the slow-release compound, tetrabutoxysilane (TBOS) that produces 1-butanol as a growth substrate, for high mechanical strength. We optimized three inputs (concentration of PVA, concentration of AG, and the crosslinking time) on two responses (compressive modulus and rate of oxygen utilization) for batch incubation experiments between 1 and 30 days using a design of experiments approach. The predictive models generated from design of experiments were then tested by measuring the compressive strength, oxygen utilization, and abiotic rates of hydrolysis for a predicted optimal bead formulation. The result of this study generated a hydrogel bead with immobilized R. rhodochrous ATCC 21198 and TBOS that exhibited a high compressive modulus on day 1 and day 30, which was accurately predicted by models. These hydrogel beads exhibited low metabolic activity based on oxygen rates on day 1 and day 30 but were not accurately predicted by the models. In addition, the ratio between oxygen utilization and abiotic rates of hydrolysis were observed to be roughly half of what was expected stoichiometrically. Lastly, we demonstrated the capability to use these beads as a bioremediation technology for cDCE as we found that, for all bead formulations, cDCE was significantly reduced after 30 days. Altogether, this work demonstrates the capability to capture and enhance the material properties of the complex hydrogel beads with predictive models yet signals the need for more robust methods to understand the metabolic activity that occurs in the hydrogel beads.

Biochar-based materials as remediation strategy in petroleum hydrocarbon-contaminated soil and water: Performances, mechanisms, and environmental impact

Petroleum contamination is considered as a major risk to the health of humans and environment. Biochars as low-cost and eco-friendly carbon materials, have been widely used for the removal of petroleum hydrocarbon in the environment. The purpose of this paper is to review the performance, mechanisms, and potential environmental toxicity of biochar, modified biochar and its integration use with other materials in petroleum contaminated soil and water. Specifically, the use of biochar in oil-contaminated water and soil as well as the factors that could influence the removal ability of biochar were systematically evaluated. In addition, the modification and integrated use of biochar for improving the removal efficiency were summarized from the aspects of sorption, biodegradation, chemical degradation, and reusability. Moreover, the functional impacts and associated ecotoxicity of pristine and modified biochars in various environments were demonstrated. Finally, some shortcoming of current approaches, and future research needs were provided for the future direction and challenges of modified biochar research. Overall, this paper gain insight into biochar application in petroleum remediation from the perspectives of performance enhancement and environmental sustainability.

Microbial consortia-mediated arsenic bioremediation in agricultural soils: Current status, challenges, and solutions

Arsenic poisoning in agricultural soil is caused by both natural and man-made processes, and it poses a major risk to crop production and human health. Soil quality, agricultural production, runoff, ingestion, leaching, and absorption by plants are all influenced by these processes. Microbial consortia have become a feasible bioremediation technique in response to the urgent need for appropriate remediation solutions. These diverse microbial populations collaborate to combat arsenic poisoning in soil by facilitating mechanisms including oxidation-reduction, methylation-demethylation, volatilization, immobilization, and arsenic mobilization. The current state, problems, and remedies for employing microbial consortia in arsenic bioremediation in agricultural soils are examined in this review. Among the elements affecting their success include diversity, activity, community organization, and environmental conditions. Also, we emphasize the sensitivity and accuracy limits of existing assessment techniques. While earlier reviews have addressed a variety of arsenic remediation options, this study stands out by concentrating on microbial consortia as a viable strategy for arsenic removal and presents performance evaluation and technical problems. This work gives vital insights for tackling the major issue of arsenic pollution in agricultural soils by explaining the potential methods and components involved in microbial consortium-mediated arsenic bioremediation.

Utility of metagenomics for bioremediation: a comprehensive review on bioremediation mechanisms and microbial dynamics of river ecosystem

Global industrialization has contributed substantial amounts of chemical pollutants in rivers, resulting in an uninhabitable state and impacting different life forms. Moreover, water macrophytes, such as water hyacinths, are abundantly present in polluted rivers, significantly affecting the overall water biogeochemistry. Bioremediation involves utilizing microbial metabolic machinery and is one of the most viable approaches for removing toxic pollutants. Conventional techniques generate limited information on the indigenous microbial population and their xenobiotic metabolism, failing the bioremediation process. Metagenomics can overcome these limitations by providing in-depth details of microbial taxa and functionality-related information required for successful biostimulation and augmentation. An in-depth summary of the findings related to pollutant metabolizing genes and enzymes in rivers still needs to be collated. The present study details bioremediation genes and enzymes functionally mined from polluted river ecosystems worldwide using a metagenomic approach. Several studies reported a wide variety of pollutant-degrading enzymes involved in the metabolism of dyes, plastics, persistent organic pollutants, and aromatic hydrocarbons. Additionally, few studies also noted a shift in the microbiome of the rivers upon exposure to contaminants, crucially affecting the ecological determinant processes. Furthermore, minimal studies have focused on the role of water-hyacinth-associated microbes in the bioremediation potentials, suggesting the need for the bioprospecting of these lesser-studied microbes. Overall, our study summarizes the prospects and utilities of the metagenomic approach and proposes the need to employ it for efficient bioremediation.

Groundwater chlorinated solvent plumes remediation from the past to the future: a scientometric and visualization analysis

Contamination of groundwater with chlorinated hydrocarbons has serious adverse effects on human health. As research efforts in this area have expanded, a large body of literature has accumulated. However, traditional review writing suffers from limitations regarding efficiency, quantity, and timeliness, making it difficult to achieve a comprehensive and up-to-date understanding of developments in the field. There is a critical need for new tools to address emerging research challenges. This study evaluated 1619 publications related to this field using VOSviewer and CiteSpace visual tools. An extensive quantitative analysis and global overview of current research hotspots, as well as potential future research directions, were performed by reviewing publications from 2000 to 2022. Over the last 22 years, the USA has produced the most articles, making it the central country in the international collaboration network, with active cooperation with the other 7 most productive countries. Additionally, institutions have played a positive role in promoting the publication of science and technology research. In analyzing the distribution of institutions, it was found that the University of Waterloo conducted the majority of research in this field. This paper also identified the most productive journals, Environmental Science & Technology and Applied and Environmental Microbiology, which published 11,988 and 3253 scientific articles over the past 22 years, respectively. The main technologies are bioremediation and chemical reduction, which have garnered growing attention in academic publishing. Our findings offer a useful resource and a worldwide perspective for scientists engaged in this field, highlighting both the challenges and the possibilities associated with addressing groundwater chlorinated solvent plumes remediation.

Next-generation hybrid technologies for the treatment of pharmaceutical industry effluents

Water and industries are intangible units of the globe that are always set to meet the population's demand. The global population depends on one-third of freshwater increasing the demand. The increase in population along with urbanization has polluted the fresh water resources. The pharmaceutical industry is marked as an emerging contaminant of water pollution. The most common type of pharmaceutical drugs that are detected in the environment includes antibiotics, analgesics, NSAIDs, and pain-relieving drugs. These drugs alter the food chain of the organisms causing chaos mainly in the marine ecosystem. Pharmaceutical drugs are found only in shallow amounts (ng/mg) they have a huge impact on the living system. The consumption of water contaminated with pharmaceutical ingredients can disrupt reproduction, hormonal imbalance, cancer, and respiratory problems. Various methods are used to remove these chemicals from the environment. In this review, we mainly focused on the emerging hybrid technologies and their significance in the effective treatment of pharmaceutical wastewater. This review paper primarily elaborates on the merits and demerits of existing conventional technologies helpful in developing integrated technologies for the modern era of pharmaceutical effluent treatment. This review paper further in detail discusses the various strategies of eco-friendly bioremediation techniques namely biostimulation, bioaugmentation, bacterial degradation, mycoremediation, phytoremediation, and others for the ultimate removal of pharmaceutical contaminants in wastewater. The review makes clear that targeted and hybrid solutions are what the world will require in the future to get rid of these pharmacological prints.

Recent advances in eco-friendly technology for decontamination of pulp and paper mill industrial effluent: a review

The economic development of a country directly depends upon industries. But this economic development should not be at the cost of our natural environment. A substantial amount of water is spent during paper production, creating water scarcity and generating wastewater. Therefore, the Pollution Control Board classifies this industry into red category. Water is used in different papermaking stages such as debarking, pulping or bleaching, washing, and finishing. The wastewater thus generated contains lignin and xenobiotic compounds such as resin acids, chlorinated lignin, phenols, furans, dioxins, chlorophenols, adsorbable organic halogens (AOX), extractable organic halogens (EOCs), polychlorinated biphenyls, plasticizers, and polychlorinated dibenzodioxins. Nowadays, several microorganisms are used in the detoxification of these hazardous effluents. Researchers have found that microbial degradation is the most promising treatment method to remove high biological oxygen demand (BOD) and chemical oxygen demand (COD) from wastewater. Microorganisms also remove AOX toxicity, chlorinated compounds, suspended solids, color, lignin, derivatives, etc. from the pulp and paper mill effluents. But in the current scenario, mill effluents are known to deteriorate the environment and therefore it is highly desirable to deploy advanced technologies for effluent treatment. This review summarizes the eco-friendly advanced treatment technologies for effluents generated from pulp and paper mills.