The impact of cerium oxide nanoparticles on the physiology of soybean (Glycine max (L.) Merr.) under different soil moisture conditions

Unlocking the potential of SiO2 and CeO2 nanoparticles for arsenic mitigation in Vigna mungo L. Hepper (Blackgram)

In this study, the interaction effects of NaAsO2 (1 and 5 μM), SiO2 NPs (10 and 100 mg/L) and CeO2 NPs (10 and 100 mg/L) were assessed in Vigna mungo (Blackgram). The treatment of NaAsO2, SiO2, CeO2-NPs and combinations of NPs & As were applied to blackgram plants under hydroponic conditions. After its application, the morpho-physiological, antioxidant activity, and phytochemical study were evaluated. At 10 and 100 mg/L of SiO2 and CeO2-NPs, there was an increase in antioxidative enzymatic activity (p < 0.05) and reactive oxygen species (ROS). However, substantial ROS accumulation was observed at 1 and 5 μM NaAsO2 and 100 mg/L SiO2 NPs (p < 0.05). Additionally, at such concentrations, there is a substantial reduction in photosynthetic pigments, nitrogen fixation, chlorosis, and plant development when compared to controls (p < 0.05). The combination of SiO2 and CeO2 NPs (10 and 100 mg/L) with NaAsO2 decreased superoxide radical and hydrogen peroxide and improved SOD, CAT, APX, GR, and chlorophyll pigments (p < 0.05). Further FTIR results were evaluated for documenting elemental and phytochemical analysis.

Root-Applied Cerium Oxide Nanoparticles and Their Specific Effects on Plants: A Review

With the pronounced increase in nanotechnology, it is likely that biological systems will be exposed to excess nanoparticles (NPs). Cerium oxide nanoparticles (CeO2 NPs) are among the most abundantly produced nanomaterials in the world. Their widespread use raises fundamental questions related to the accumulation in the environment and further interactions with living organisms, especially plants. NPs present in either soil or soilless environments are absorbed by the plant root systems and further transported to the aboveground parts. After entering the cytoplasm, NPs interact with chloroplast, nucleus, and other structures responsible for metabolic processes at the cellular level. In recent years, several studies have shown the impact of nanoceria on plant growth and metabolic processes. Research performed on different plants has shown a dual role for CeO2 NPs. The observed effects can be positive or negative and strongly depend on the plant species, characterization, and concentrations of NPs. This review describes the impact of root-applied CeO2 NPs on plant growth, photosynthesis, metal homeostasis, and parameters of induced oxidative stress.

Nanoparticles synergy: Enhancing wheat (Triticum aestivum L.) cadmium tolerance with iron oxide and selenium

Nanotechnology is capturing great interest worldwide due to their stirring applications in various fields and also individual application of iron oxide nanoparticle (FeO - NPs) and selenium nanoparticles (Se - NPs) have been studied in many literatures. However, the combined application of FeO and Se - NPs is a novel approach and studied in only few studies. For this purpose, a pot experiment was conducted to examine various growth and biochemical parameters in wheat (Triticum aestivum L.) under the toxic concentration of cadmium (Cd) i.e., 50 mg kg-1 which were primed with combined application of two levels of FeO and Se - NPs i.e., 15 and 30 mg L-1 respectively. The results showed that the Cd toxicity in the soil showed a significantly (P < 0.05) declined in the growth, gas exchange attributes, sugars, AsA-GSH cycle, cellular fractionation, proline metabolism in T. aestivum. However, Cd toxicity significantly (P < 0.05) increased oxidative stress biomarkers, enzymatic and non-enzymatic antioxidants including their gene expression in T. aestivum. Although, the application of FeO and Se - NPs showed a significant (P < 0.05) increase in the plant growth and biomass, gas exchange characteristics, enzymatic and non-enzymatic compounds and their gene expression and also decreased the oxidative stress, and Cd uptake. In addition, individual or combined application of FeO and Se - NPs enhanced the cellular fractionation and decreases the proline metabolism and AsA - GSH cycle in T. aestivum. These results open new insights for sustainable agriculture practices and hold immense promise in addressing the pressing challenges of heavy metal contamination in agricultural soils.

Copper oxide nanoparticles: an effective suppression tool against bacterial leaf blight of rice and its impacts on plants

BACKGROUND

To address the challenges of food security for the ever-increasing population, the emergence of nanotechnology provides an alternate technology of choice for the production of safer pesticides which serves as a substitute for conventional fertilizer. The antidrug resistance of Xanthomonas oryzae pv. oryzae (Xoo) and build-up of chemicals in the environment has made it necessary to find alternative safe techniques for effective disease management. Hence, in this study, copper oxide nanoparticles (CuONPs) were produced by green synthesis using a Hibiscus rosa-sinensis L. flower extract.

RESULTS

The characterization of CuONPs using ultraviolet-visible spectrophotometry, scanning electron microscopy with an energy-dispersive spectrum profile, Fourier transform infrared spectroscopy, and X-ray diffraction ascertained the presence of CuONPs, which were nanorods of 28.1 nm. CuONPs significantly obstructed the growth and biofilm development of Xoo by 79.65% and 79.17% respectively. The antibacterial mechanism of CuONPs was found to result from wounding the cell membrane, giving rise to an exodus of intracellular content and generation of oxidative reactive oxygen species that invariably inhibited Xoo respiration and growth. A toxicity study under greenhouse conditions revealed that CuONPs significantly increased growth variables and the biomass of rice, and reduced bacterial leaf blight. Application of CuONPs on Arabidopsis improved the chlorophyll fluorescence parameters; the ΦPSII was significantly increased by 152.05% in comparison to the control.

CONCLUSION

Altogether, these results suggest that CuONPs in low concentration (200.0 μg mL-1 ) are not toxic to plants and can serve as nano-fertilizers and nano-pesticides. © 2023 Society of Chemical Industry.

Nanotechnology for endorsing abiotic stresses: a review on the role of nanoparticles and nanocompositions

Environmental stresses, including the salt and heavy metals contaminated sites, signify a threat to sustainable crop production. The existence of these stresses has increased in recent years due to human-induced climate change. In view of this, several remediation strategies including nanotechnology have been studied to find more effective approaches for sustaining the environment. Nanoparticles, due to unique physiochemical properties; i.e. high mobility, reactivity, high surface area, and particle morphology, have shown a promising solution to promote sustainable agriculture. Crop plants easily take up nanoparticles, which can penetrate into the cells to play essential roles in growth and metabolic events. In addition, different iron- and carbon-based nanocompositions enhance the removal of metals from the contaminated sites and water; these nanoparticles activate the functional groups that potentially target specific molecules of the metal pollutants to obtain efficient remediation. This review article emphasises the recent advancement in the application of nanotechnology for the remediation of contaminated soils with metal pollutants and mitigating different abiotic stresses. Different implementation barriers are also discussed. Furthermore, we reported the opportunities and research directions to promote sustainable development based on the application of nanotechnology.

Soil water stress alters differentially relative metabolic pathways affecting growth performance and metal uptake efficiency in a cadmium hyperaccumulator ecotype of Sedum alfredii

Modeling plants for biomass production and metal uptake from surrounding environment is strongly dependent on the moisture content of soil. Therefore, experiments were conducted to find out how soil moisture affects the phenotypic traits, photosynthetic efficiency, metabolic profile, and metal accumulation in the hyperaccumulating ecotype of Sedum alfredii (S. alfredii). A total of six water potential gradients were set: 0 ~ -15 kPa (T1), -15 ~ -30 kPa (T2), -30 ~ -45 kPa (T3), -45 ~ -60 kPa (T4), -60 ~ -75 kPa (T5), and -75 ~ -90 kPa (T6). Different water potential treatments had a significant effect on plant growth and metal uptake efficiency. Compared to T3, T2 was more effective in promoting plant growth and development, with an increase in biomass of 23% and 17% in both fresh weight (FW) and dry weight (DW), respectively. T2 and T3 had the highest cadmium (Cd) content in the shoot (280.2 mg/kg) and (283.3 mg/kg), respectively, whereas T1 had the lowest values (204.7 mg/kg). Cd availability for plants in the soil was affected by moving soil moisture cycles. Changes in soil moisture that were either too high or too low compared to the ideal soil water content for S. alfredii growth resulted in a significant reduction in Cd accumulation in shoots. Tryptophan, phenylalanine, and other amino acids were accumulated in T5, whereas only tryptophan and phenylalanine slightly increased in T1. Sugars and alcohols such as sucrose, trehalose, mannitol, galactinol, and mannobiose increased in T5, while they decreased significantly in T1. Interestingly, in contrast to T1, the two impaired metabolic pathways in T5 (galactose and starch metabolism) were identified to be glucose metabolic pathways. These findings provide scientific information (based on experiments) to improve biomass production and metal uptake efficiency in hyperaccumulating ecotype of S. alfredii for phytoremediation-contaminated agricultural fields.

Nanoengineered particles for sustainable crop production: potentials and challenges

Nanoengineered nanoparticles have a significant impact on the morphological, physiology, biochemical, cytogenetic, and reproductive yields of agricultural crops. Metal and metal oxide nanoparticles like Ag, Au, Cu, Zn, Ti, Mg, Mn, Fe, Mo, etc. and ZnO, TiO2, CuO, SiO2, MgO, MnO, Fe2O3 or Fe3O4, etc. that found entry into agricultural land, alter the morphological, biochemical and physiological system of crop plants. And the impacts on these parameters vary based on the type of crop and nanoparticles, doses of nanoparticles and its exposure situation or duration, etc. These nanoparticles have application in agriculture as nanofertilizers, nanopesticides, nanoremediator, nanobiosensor, nanoformulation, phytostress-mediator, etc. The challenges of engineered metal and metal oxide nanoparticles pertaining to soil pollution, phytotoxicity, and safety issue for food chains (human and animal safety) need to be understood in detail. This review provides a general overview of the applications of nanoparticles, their potentials and challenges in agriculture for sustainable crop production.

Bacillus mycoides PM35 in combination with titanium dioxide (TiO2)⎯nanoparticles enhanced morpho-physio-biochemical attributes in Barley (Hordeum vulgare L.) under cadmium stress

Plant growth-promoting rhizobacteria (PGPR) are naturally occurring soil bacteria and are known to induce plant growth promotion and titanium dioxide (TiO₂)⎯nanoparticles (NPs) used in a range of applications that need increased whiteness, improved corrosion resistance and photocatalytic activity. Keeping in view the stress mitigation potential of TiO₂⎯NPS and B. mycoides PM35, the existing research work was premeditated to inspect the beneficial role of seed priming with using different levels of TiO₂⎯NPs i.e., [(0 no TiO₂⎯NPs), 25 and 50 μg/ml] and soil incubation plant growth promoting rhizobacteria (B. mycoides PM35) i.e., [(0 no B. mycoides PM35), 10 and 20 μL] on biochemical, morphological and physiological characteristics of Barley (Hordeum vulgare L.) plants under different levels of Cd in the soil i.e., [(0 Cd), 50 and 100 mg kg^-1]. Results from the present study showed that the increasing levels of Cd in the soil significantly (P < 0.05) decreased plant growth and biomass, photosynthetic pigments, gas exchange attributes, sugars, and nutritional contents from the roots and shoots of the plants. In contrast, increasing levels of Cd in the soil significantly (P < 0.05) increased oxidative stress indicators in term of malondialdehyde, hydrogen peroxide, and electrolyte leakage, and also increased organic acid exudation patter in the roots of H. vulgare. Although, the activities of enzymatic antioxidants and the response of their gene expressions in the roots and shoots of the plants and non-enzymatic such as phenolic, flavonoid, ascorbic acid, and anthocyanin contents were initially increased with the exposure of 50 mg kg^-1 Cd, but decreased by the increasing the Cd concentration 100 mg kg^-1 in the soil. The negative impact of Cd toxicity can overcome the application of PGPR (B. mycoides PM35) and TiO₂⎯NPs, which ultimately increased plant growth and biomass by capturing the reactive oxygen species, and decreased oxidative stress in H. vulgare by decreasing the Cd contents in the roots and shoots of the plants. Our results also showed that the TiO₂⎯NPs were more sever and showed better results when we compared with PGPR (B. mycoides PM35) under the same treatment of Cd in the soil. Research findings, therefore, suggest that the combined application of PGPR (B. mycoides PM35) and TiO₂⎯NPs can ameliorate Cd toxicity in H. vulgare, resulting in improved plant growth and composition under metal stress, as depicted by balanced exudation of organic acids.

Cobalt oxide nanoparticles: An effective growth promoter of Arabidopsis plants and nano-pesticide against bacterial leaf blight pathogen in rice

Recently, the application of cobalt oxide nanoparticles (Co₃O₄NPs) has gained popularity owing to its magnetic, catalytic, optical, antimicrobial, and biomedical properties. However, studies on its use as a crop protection agent and its effect on photosynthetic apparatus are yet to be reported. Here, Co₃O₄NPs were first green synthesized using Hibiscus rosa-sinensis flower extract and were characterized using UV-Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), transmission/scanning electron microscopy methods. Formation of the Co₃O₄NPs was attested based on surface plasmon resonance at 210 nm. XRD assay showed that the samples were crystalline having a mean size of 34.9 nm. The Co₃O₄NPs at 200 µg/ml inhibited the growth (OD₆₀₀ = 1.28) and biofilm formation (OD₅₇₀ = 1.37) of Xanthomonas oryzae pv. oryzae (Xoo) respectively, by 72.87% and 79.65%. Rice plants inoculated with Xoo had disease leaf area percentage (DLA %) of 57.25% which was significantly reduced to 11.09% on infected plants treated with 200 µg/ml Co₃O₄NPs. Also, plants treated with 200 µg/ml Co₃O₄NPs only had significant increment in shoot length, root length, fresh weight, and dry weight in comparison to plants treated with double distilled water. The application of 200 µg/ml Co₃O₄NPs on the Arabidopsis plant significantly increased the photochemical efficacy of PSII (ΦPSII) and photochemical quenching (qP) respectively, by 149.10% and 125.00% compared to the control while the non-photochemical energy dissipation (ΦNPQ) was significantly lowered in comparison to control. In summary, it can be inferred that Co₃O₄NPs can be a useful agent in the management of bacterial phytopathogen diseases.

Nanoparticles-Based Delivery Systems for Salicylic Acid as Plant Growth Stimulator and Stress Alleviation

The population growth tendency leads to an increase in demand for food products, and in particular, products obtained from the processing of plants. However, there are issues of biotic and abiotic stresses that can significantly reduce crop yields and escalate the food crisis. Therefore, in recent years, the development of new methods of plant protection became an important task. One of the most promising ways to protect plants is to treat them with various phytohormones. Salicylic acid (SA) is one of the regulators of systemic acquired resistance (SAR) signaling pathways. These mechanisms are able to protect plants from biotic and abiotic stresses by increasing the expression of genes that encode antioxidant enzymes. However, salicylic acid in high doses can act as an antagonist and have the negative rebound effect of inhibition of plant growth and development. To maintain optimal SA concentrations in the long term, it is necessary to develop systems for the delivery and slow release of SA in plants. The purpose of this review is to summarize and study methods of delivery and controlled release of SA in a plant. Various carriers-based nanoparticles (NPs) synthesized from both organic and inorganic compounds, their chemical structure, impacts on plants, advantages, and disadvantages are comprehensively discussed. The mechanisms of controlled release of SA and the effects of the use of the considered composites on the growth and development of plants are also described. The present review will be helpful to design or fabricate NPs and NPs-based delivery systems for salicylic acid-controlled release and better understating of the mechanism of SA-NPs interaction to alleviate stress on plants.

Investigating the role of bentonite clay with different soil amendments to minimize the bioaccumulation of heavy metals in Solanum melongena L. under the irrigation of tannery wastewater

Wastewater from tanneries is a major source of heavy metals in soil and plants when used for crop irrigation. The unavoidable toxicological effects of this contamination, however, can be minimized through two independent steps discussed in the present study. In the first step, a batch sorption experiment was conducted in which Cr was adsorbed through bentonite clay. For this purpose, DTPA extraction method was used to analyze Cr concentration in the soil after regular time intervals (0.5, 1, 2, 6, 8, 9, 10.5, 11.5, and 20.3 h) which reduced Cr concentration from 38.542 mgL^-1 for 30 min to 5.6597 mgL^-1 for 20.3 h, respectively, by applying 1% bentonite. An increase in the contact time efficiently allowed soil adsorbent to adsorb maximum Cr from soil samples. In the second step, a pot experiment was conducted with 10 different treatments to improve the physiological and biochemical parameters of the Solanum melongena L. irrigated under tanneries' wastewater stress. There were four replicates, and the crop was harvested after 30 days of germination. It was seen that the application of wastewater significantly (P < 0.01) reduced growth of Solanum melongena L. by reducing root (77%) and shoot (63%) fresh weight when compared with CFOP (Ce-doped Fe₂O₃ nanoparticles); chlorophyll a and b (fourfolds) were improved under CFOP application relative to control (CN). However, the deleterious effects of Cr (86%) and Pb (90%) were significantly decreased in shoot through CFOP application relative to CN. Moreover, oxidative damage induced by the tannery's wastewater stress (P < 0.01) was tolerated by applying different soil amendments. However, results were well pronounced with the application of CFOP which competitively decreased the concentrations of MDA (95%), H₂O₂ (89%), and CMP (85%) by efficiently triggering the activities of antioxidant defense mechanisms such as APX (threefold), CAT (twofold), and phenolics (75%) in stem relative to CN. Consequently, all the applied amendments (BN, BT, FOP, and CFOP) have shown the ability to efficiently tolerate the tannery's wastewater stress; results were more pronounced with the addition of CFOP and FOP+BT by improving physiological and biochemical parameters of Solanum melongena L. in an eco-friendly way.

A comprehensive study of selenium and cerium oxide nanoparticles on mung bean: Individual and synergistic effect on photosynthesis pigments, antioxidants, and dry matter accumulation

In this study, the interaction effects of CeO₂ NPs (250, 500 and 1000 mg L^-1) and Se NPs (25, 50 and 75 mg L^-1) were evaluated in mung bean (Vigna radiata). Single NPs and their combinations were foliar applied to 45-day old mung bean plants under greenhouse conditions. In each pot, a total volume of 100 mL of NPs suspension was sprayed on the plants shoot in two steps and one-week interval. After 94 days of growth, membrane degradation, antioxidant activity, photosynthetic pigments, and dry matter accumulation were assessed. At 250 and 500 mg CeO₂-NPs L^-1, there was partial increase of dry matter, stimulated activity of antioxidant enzymes (p ≤ 0.05), and reactive oxygen species (ROS). However, at 1000 mg L^-1, CeO₂-NPs caused strong accumulation of ROS (p ≤ 0.05), enlargement of starch granules and swelling of chloroplasts. In addition, at such concentration, there was accumulation of starch granules, reduction of photosynthetic pigments, biological nitrogen fixation, chlorosis, and a significant retardation in plant growth, compared with control, (p ≤ 0.05). Combination of Se-NPs (25 and 50 mg L^-1) with 250 mg L^-1 of CeO₂ NPs decreased hydrogen peroxide, improved CAT, Chla, Chlb, and increased dry matter (p ≤ 0.05). At 1000 mg CeO₂ NPs L^-1, foliar spray of Se-NPs led to Ce accumulation in the cell wall and increased levels of SOD and proline (p ≤ 0.05). Results showed that 25 and 50 mg Se NPs L^-1 ameliorate the stress of CeO₂ NPs by upregulating photosynthesis pigments, antioxidants, and dry matter accumulation. Therefore, depending on the CeO₂ NPs concentration, the mechanisms of Se NPs in modulating CeO₂ NPs stress varied; low concentrations of Se NPs may strengthen the metabolism of legumes, and protect them against foliar toxicity of CeO₂ NPs in semi-arid ecosystems.

CeO2 Nanoparticles Seed Priming Increases Salicylic Acid Level and ROS Scavenging Ability to Improve Rapeseed Salt Tolerance

Soil salinity is a major issue limiting efficient crop production. Seed priming with nanomaterials (nanopriming) is a cost-effective technology to improve seed germination under salinity; however, the underlying mechanisms still need to be explored. Here, polyacrylic acid coated nanoceria (cerium oxide nanoparticles) (PNC, 9.2 nm, -38.7 mV) are synthesized and characterized. The results show that under salinity, PNC priming significantly increases rapeseed shoot length (41.5%), root length (93%), and seedling dry weight (78%) compared to the no-nanoparticle (NNP) priming group. Confocal imaging results show that compared with NNP group, PNC priming significantly reduces reactive oxygen species (ROS) level in leaf (94.3% of H₂O₂, 56.4% of ^•O₂ ^-) and root (38.4% of H₂O₂, 41.3% of ^•O₂ ^-) of salt stressed rapeseed seedlings. Further, the results show that compared with the NNP group, PNC priming not only increases salicylic acid (SA) content in shoot (51.3%) and root (78.4%), but also upregulates the expression of SA biosynthesis related genes in salt stressed rapeseed. Overall, PNC nanopriming improved rapeseed salt tolerance is associated with both the increase of ROS scavenging ability and the increase of salicylic acid. The results add more information to understand the complexity of mechanisms behind nanoceria priming improved plant salt tolerance.

Nano-priming as emerging seed priming technology for sustainable agriculture-recent developments and future perspectives

Nano-priming is an innovative seed priming technology that helps to improve seed germination, seed growth, and yield by providing resistance to various stresses in plants. Nano-priming is a considerably more effective method compared to all other seed priming methods. The salient features of nanoparticles (NPs) in seed priming are to develop electron exchange and enhanced surface reaction capabilities associated with various components of plant cells and tissues. Nano-priming induces the formation of nanopores in shoot and helps in the uptake of water absorption, activates reactive oxygen species (ROS)/antioxidant mechanisms in seeds, and forms hydroxyl radicals to loosen the walls of the cells and acts as an inducer for rapid hydrolysis of starch. It also induces the expression of aquaporin genes that are involved in the intake of water and also mediates H₂O_2, or ROS, dispersed over biological membranes. Nano-priming induces starch degradation via the stimulation of amylase, which results in the stimulation of seed germination. Nano-priming induces a mild ROS that acts as a primary signaling cue for various signaling cascade events that participate in secondary metabolite production and stress tolerance. This review provides details on the possible mechanisms by which nano-priming induces breaking seed dormancy, promotion of seed germination, and their impact on primary and secondary metabolite production. In addition, the use of nano-based fertilizer and pesticides as effective materials in nano-priming and plant growth development were also discussed, considering their recent status and future perspectives.

Zinc Oxide Nanoparticles and Their Biosynthesis: Overview

Zinc (Zn) is plant micronutrient, which is involved in many physiological functions, and an inadequate supply will reduce crop yields. Its deficiency is the widest spread micronutrient deficiency problem; almost all crops and calcareous, sandy soils, as well as peat soils and soils with high phosphorus and silicon content are expected to be deficient. In addition, Zn is essential for growth in animals, human beings, and plants; it is vital to crop nutrition as it is required in various enzymatic reactions, metabolic processes, and oxidation reduction reactions. Finally, there is a lot of attention on the Zn nanoparticles (NPs) due to our understanding of different forms of Zn, as well as its uptake and integration in the plants, which could be the primary step toward the larger use of NPs of Zn in agriculture. Nanotechnology application in agriculture has been increasing over recent years and constitutes a valuable tool in reaching the goal of sustainable food production worldwide. A wide array of nanomaterials has been used to develop strategies of delivery of bioactive compounds aimed at boosting the production and protection of crops. ZnO-NPs, a multifunctional material with distinct properties and their doped counterparts, were widely being studied in different fields of science. However, its application in environmental waste treatment and many other managements, such as remediation, is starting to gain attention due to its low cost and high productivity. Nano-agrochemicals are a combination of nanotechnology with agrochemicals that have resulted in nano-fertilizers, nano-herbicides, nano-fungicides, nano-pesticides, and nano-insecticides being developed. They have anti-bacterial, anti-fungal, anti-inflammatory, antioxidant, and optical capabilities. Green approaches using plants, fungi, bacteria, and algae have been implemented due to the high rate of harmful chemicals and severe situations used in the manufacturing of the NPs. This review summarizes the data on Zn interaction with plants and contributes towards the knowledge of Zn NPs and its impact on plants.

Engineered Nanomaterial Exposure Affects Organelle Genetic Material Replication in Arabidopsis thaliana

Mitochondria and chloroplasts not only are cellular energy sources but also have important regulatory and developmental roles in cell function. CeO₂, FeOx ENMs, ZnS, CdS QDs, and relative metal salts were utilized in Murashige-Skoog (MS) synthetic growth medium at different concentrations (80-500 mg L^-1) and times of exposures (0-20 days). Analysis of physiological and molecular response of A. thaliana chloroplasts and mitochondrion demonstrates that ENMs increase or decrease functionality and organelle genome replication. Exposure to nanoscale CeO₂ and FeOx causes an 81-105% increase in biomass, whereas ZnS and CdS QDs yielded neutral or a 59% decrease in growth, respectively. Differential effects between ENMs and their corresponding metal salts highlight nanoscale-specific response pathways, which include energy production and oxidative stress response. Differences may be ascribed to ENM and the metal salt dissolution rate and the toxicity of the metal ion, which suggests eventual biotransformation processes occurring within the plant. With regard to specific effects on plastid (pt) and mitochondrial (mt) DNA, CdS QD exposure triggered potential variations at the substoichiometric level in the two organellar genomes, while nanoscale FeOx and ZnS QDs caused a 1- to 3-fold increase in ptDNA and mtDNA copy numbers. Nanoparticle CeO₂ exposure did not affect ptDNA and mtDNA stoichiometry. These findings suggest that modification in stoichiometry is a potential morpho-functional adaptive response to ENM exposure, triggered by modifications of bioenergetic redox balance, which leads to reducing the photosynthesis or cellular respiration rate.

Phytonanotechnology applications in modern agriculture

With the rapidly changing global climate, the agricultural systems are confronted with more unpredictable and harsh environmental conditions than before which lead to compromised food production. Thus, to ensure safer and sustainable crop production, the use of advanced nanotechnological approaches in plants (phytonanotechnology) is of great significance. In this review, we summarize recent advances in phytonanotechnology in agricultural systems that can assist to meet ever-growing demands of food sustainability. The application of phytonanotechnology can change traditional agricultural systems, allowing the target-specific delivery of biomolecules (such as nucleotides and proteins) and cater the organized release of agrochemicals (such as pesticides and fertilizers). An amended comprehension of the communications between crops and nanoparticles (NPs) can improve the production of crops by enhancing tolerance towards environmental stresses and optimizing the utilization of nutrients. Besides, approaches like nanoliposomes, nanoemulsions, edible coatings, and other kinds of NPs offer numerous selections in the postharvest preservation of crops for minimizing food spoilage and thus establishing phtonanotechnology as a sustainable tool to architect modern agricultural practices.

Ce-Mn ferrite nanocomposite promoted the photosynthesis, fortification of total yield, and elongation of wheat (Triticum aestivum L.)

Recent advances in nano-enabled agriculture raised hope in the efficient delivery of bioactive minerals to crops. Nanocomposites (NCPs) are promising technologies in soil fertilizing without compromising environmental contamination. NCPs have shown positive impacts on plant growth and nanofortification of crop yield. Here, we have synthesized a nanocomposite that could induce the positive impacts of the Mn, Fe, and Ce nanoparticles for the crops. The NCPs were extensively characterized and applied at three levels 100, 250, and 500 ppm on T. aestivum L. seeds for 10 days. The germination, biomass, and elongation have been measured as the main physiological parameters of the plant. The total content of chlorophyll, carotenoids, and enzymatic and non-enzymatic antioxidant in response to NCPs was quantified. The concentration of essential minerals (iron and manganese) and the non-essential element of cerium in roots and shoots were quantified using inductively coupled plasma mass spectrometry (ICP-MS). Briefly, the germination rate increased by 15%; total chlorophyll and carotenoid were augmented by 61% and 38%, respectively, in exposure to 100 ppm. Higher uptake of micronutrient Fe and Mn in shoots and led to higher yield production by 14% and 18%, respectively. A positive correlation between the increasing dose of NCPs and the total content of the superoxide dismutase (SOD), and peroxidase (POD) were quantified. Overall, the results indicate the high potential of NCPs applications in agricultural practice.

The Combined Effect of ZnO and CeO2 Nanoparticles on Pisum sativum L.: A Photosynthesis and Nutrients Uptake Study

Cerium oxide nanoparticles (CeO2 NPs) and zinc oxide nanoparticles (ZnO NPs) are emerging pollutants that are likely to occur in the contemporary environment. So far, their combined effects on terrestrial plants have not been thoroughly investigated. Obviously, this subject is a challenge for modern ecotoxicology. In this study, Pisum sativum L. plants were exposed to either CeO2 NPs or ZnO NPs alone, or mixtures of these nano-oxides (at two concentrations: 100 and 200 mg/L). The plants were cultivated in hydroponic system for twelve days. The combined effect of NPs was proved by 1D ANOVA augmented by Tukey's post hoc test at p = 0.95. It affected all major plant growth and photosynthesis parameters. Additionally, HR-CS AAS and ICP-OES were used to determine concentrations of Cu, Mn, Fe, Mg, Ca, K, Zn, and Ce in roots and shoots. Treatment of the pea plants with the NPs, either alone or in combination affected the homeostasis of these metals in the plants. CeO2 NPs stimulated the photosynthesis rate, while ZnO NPs prompted stomatal and biochemical limitations. In the mixed ZnO and CeO2 treatments, the latter effects were decreased by CeO2 NPs. These results indicate that free radicals scavenging properties of CeO2 NPs mitigate the toxicity symptoms induced in the plants by ZnO NPs.

Nanoceria seed priming enhanced salt tolerance in rapeseed through modulating ROS homeostasis and α-amylase activities

BACKGROUND

Salinity is a big threat to agriculture by limiting crop production. Nanopriming (seed priming with nanomaterials) is an emerged approach to improve plant stress tolerance; however, our knowledge about the underlying mechanisms is limited.

RESULTS

Herein, we used cerium oxide nanoparticles (nanoceria) to prime rapeseeds and investigated the possible mechanisms behind nanoceria improved rapeseed salt tolerance. We synthesized and characterized polyacrylic acid coated nanoceria (PNC, 8.5 ± 0.2 nm, -43.3 ± 6.3 mV) and monitored its distribution in different tissues of the seed during the imbibition period (1, 3, 8 h priming). Our results showed that compared with the no nanoparticle control, PNC nanopriming improved germination rate (12%) and biomass (41%) in rapeseeds (Brassica napus) under salt stress (200 mM NaCl). During the priming hours, PNC were located mostly in the seed coat, nevertheless the intensity of PNC in cotyledon and radicle was increased alongside with the increase of priming hours. During the priming hours, the amount of the absorbed water (52%, 14%, 12% increase at 1, 3, 8 h priming, respectively) and the activities of α-amylase were significantly higher (175%, 309%, 295% increase at 1, 3, 8 h priming, respectively) in PNC treatment than the control. PNC primed rapeseeds showed significantly lower content of MDA, H2O2, and •O2- in both shoot and root than the control under salt stress. Also, under salt stress, PNC nanopriming enabled significantly higher K+ retention (29%) and significantly lower Na+ accumulation (18.5%) and Na+/K+ ratio (37%) than the control.

CONCLUSIONS

Our results suggested that besides the more absorbed water and higher α-amylase activities, PNC nanopriming improves salt tolerance in rapeseeds through alleviating oxidative damage and maintaining Na+/K+ ratio. It adds more knowledge regarding the mechanisms underlying nanopriming improved plant salt tolerance.

Recent insights into the impact, fate and transport of cerium oxide nanoparticles in the plant-soil continuum

The advent of the nanotechnology era offers a unique opportunity for sustainable agriculture provided that the exposure and toxicity are adequately assessed and properly controlled. The global production and application of cerium oxide nanoparticles (CeO₂-NPs) in various industrial sectors have tremendously increased. Most of the nanoparticles end up in water and soil where they interact with soil microorganisms and plants. Investigating the uptake, translocation and accumulation of CeO₂-NPs is critical for its safe application in agriculture. Plant uptake of CeO₂-NPs may lead to their accumulation in different plant tissues and interference with key metabolic processes of plants. Soil microbes can also be affected by increasing CeO₂-NPs in soil, leading to changes in the physiology and enzymatic activity of soil microorganisms. The interactions between CeO₂-NPs, microbes and plants in the agricultural system need systemic research in ecologically relevant conditions. In the present review, The uptake pathways and in-planta translocation of CeO₂-NPs,and their impact on plant morphology, nutritional values, antioxidant enzymes and molecular determinants are presented. The role of CeO₂-NPs in modifying soil microbial community in plant rhizosphere is also discussed. Overall, the review aims to provide a comprehensive account on the behaviour of CeO₂-NPs in soil-plant systems and their potential impacts on the soil microbial community and plant health.

Exposure of cerium oxide nanoparticles to the hyperaccumulator Sedum alfredii decreases the uptake of cadmium via the apoplastic pathway

Cadmium (Cd) is harmful to the environment and threatens human health. With the increasing use of cerium oxide nanoparticles (CeO₂NPs) in extensive industries, investigating the combination of CeO₂NPs and plants has attracted research interests for phytoremediation. Here, we explored the effects of CeO₂NPs on Cd uptake, transport and the consequent Cd accumulation in Sedum alfredii. Exposure of 50 or 500 mg L^-1 CeO₂NPs alone had no apparent damaging effects on plant growth. However, upon Cd condition, the consistent CeO₂NPs decreased Cd concentrations in the roots and shoots by up to 37%. Furthermore, the application of a metabolic inhibitor revealed that CeO₂NPs mainly decreased the Cd uptake in roots by the apoplastic pathway. Simultaneously, CeO₂NPs accelerated the development of Casparian strips (CSs) and suberin, which was further proven by the elevated expression levels of genes associated with their formation, SaCASP, SaGPAT5, SaKCS20 and SaCYP86A1. Compared to CeO₂NPs added alone, the concurrent Cd decreased the Ce contents in the roots and altered its translocation from root to shoot. Taken together, both CeO₂NPs and Cd influence the interactional uptake of both chemicals in roots of S. alfredii mainly via the apoplastic pathway which is primarily regulated by the development of CSs and suberin.

Effects of engineered lignin-graft-PLGA and zein-based nanoparticles on soybean health

The majority of published research on the effect of engineered nanoparticles on terrestrial plant species is focused on inorganic nanoparticles, with the effects of organic polymeric nanoparticles (NP) on plants remaining largely unexplored. It is critical to understand the impact of polymeric NPs on plants if these particles are to be used as agrochemical delivery systems. This study investigates the effect of biodegradable polymeric lignin-based nanoparticles (LNPs) and zein nanoparticles (ZNP) on soybean plant health. The LNPs (114 ± 3.4 nm, -53.8 ± 6.9 mV) were synthesized by emulsion evaporation from lignin-graft-poly(lactic-co-glycolic) acid, and ZNPs (142 ± 3.9 nm and + 64.5 ± 4.7 mV) were synthesized by nanoprecipitation. Soybeans were grown hydroponically and treated with 0.02, 0.2, and 2 mg/ml of LNPs or ZNPs at 28 days after germination. Plants were harvested after 1, 3, 7 and 14 days of particle exposure and analyzed for root and stem length, chlorophyll concentration, dry biomass of roots and stem, nutrient uptake and plant ROS. Root and stem length, chlorophyll and stem biomass did not differ significantly between treatments and controls for LNPs-treated plants at all concentrations, and at low doses of ZNPs. At 2 mg/ml ZNPs, the highest concentration tested, after 7 days of treatment chlorophyll levels and root biomass increased and stem length was reduced in comparison to the control. Nutrient uptake was largely unaffected at 0.02 and 0.2 mg/ml NPs. A concentration-dependent increase in the oxidative stresss was detected, especially in the ZNP treated plants. Overall, LNPs and ZNPs had a minimum impact on soybean health especially at low and medium doses. To our knowledge this is the first study to show the effect of zein and lignin based polymeric NPs designed for agrochemical delivery on soybean plant health.

Different physiological responses of C3 and C4 plants to nanomaterials

Several studies have previously reported that nanomaterial uptake and toxicity in plants are species dependent. However, the differences between photosynthetic pathways, C3 and C4, following nanomaterial exposure are poorly understood. In the current work, wheat and rice, two C3 pathway species are compared to amaranth and maize, which utilize the C4 photosynthetic mechanism. These plants were cultured in soils which were spiked with CuO, Ag, TiO₂, MWCNT, and FLG nanomaterials. Overall, the C4 plant exhibited higher resilience to NM stress than C3 plants. In particular, significant differences were observed in chlorophyll contents with rice returning a 40.9-54.2% decrease compared to 3.5-15.1% for maize. Fv/Fm levels were significantly reduced by up to 51% in rice whereas no significant reductions were observed in amaranth and maize. Furthermore, NM uptake in the C3 species was greater than that in C4 plants, a trend that was also seen in metal concentration. TEM results showed that CuO NPs altered the chloroplast thylakoid structure in rice leaves and a large number of CuO NPs were observed in the vascular sheath cells. In contrast, there were no significant changes in the chloroplasts in the vascular sheath and no significant CuO NPs were found in maize leaves. This study was the first to systematically characterize the effect of metal and carbon-based nanomaterials in soil on C3 and C4 plants, providing a new perspective for understanding the impact of nanomaterials on plants.

Effects of Ceria Nanoparticles and CeCl3 on Plant Growth, Biological and Physiological Parameters, and Nutritional Value of Soil Grown Common Bean (Phaseolus vulgaris)

The release of metal ions may play an important role in toxicity of metal-based nanoparticles. In this report, a life cycle study is carried out in a greenhouse, to compare the effects of ceria nanoparticles (NPs) and Ce³⁺ ions at 0, 50, 100, and 200 mg Ce kg^-1 on plant growth, biological and physiological parameters, and nutritional value of soil-grown common bean plants. Ceria NPs have a tendency to negatively affect photosynthesis, but the effect is not statistically significant. Ce³⁺ ionic treatments at 50, 100, and 200 mg Ce kg^-1 result in increases of 1.25-, 0.66-, and 1.20-fold in stomatal conductance, respectively, relative to control plants. Both ceria NPs and Ce³⁺ ions disturb the homeostasis of antioxidant defense system in the plants, but only 200 mg Ce kg^-1 ceria NPs significantly induce lipid peroxidation in the roots. Ceria NP treatments tend to reduced fresh weight and to increase mineral contents of the green pods, but have no effect on the organic nutrient contents. On the contrary, Ce³⁺ ion treatments modify the organic compositions and thus alter the nutritional quality and flavor of the green pods. These results suggest that the two Ce forms may have different mechanisms on common bean plants.

Controlled release micronutrient fertilizers for precision agriculture - A review

The rapid growth of the global population and the resulting need to ensure sufficient food safety in highly productive agricultural practices. Intensive cultivation of plants contributes to the impoverishment of soils and thus forces farmers to apply intensive fertilization with microelements. Precise fertilization techniques are the future of agriculture, in which nutrients are supplied in controlled way with minimized losses to the environment, caused by leaching to groundwater. Kinetics of nutrients release should be thus adjusted to plant requirements and kinetics of uptake by the plant. The paper presents current achievements in the field of fertilizers with controlled release of microelements, which, apart from the main fertilizer components, are also very significant for proper plant growth. Fertilizers are divided into four basic groups, which include low-solubility fertilizers, fertilizers with external coating, bio-based and nano-fertilizers. Despite structural differences, all groups show properties of controlled microelement release. The paper presents new fertilization technologies with consideration of their influence on the environment.

Soybean Interaction with Engineered Nanomaterials: A Literature Review of Recent Data

With a continuous increase in the production and use in everyday life applications of engineered nanomaterials, concerns have appeared in the past decades related to their possible environmental toxicity and impact on edible plants (and therefore, upon human health). Soybean is one of the most commercially-important crop plants, and a perfect model for nanomaterials accumulation studies, due to its high biomass production and ease of cultivation. In this review, we aim to summarize the most recent research data concerning the impact of engineered nanomaterials on the soya bean, covering both inorganic (metal and metal-oxide nanoparticles) and organic (carbon-based) nanomaterials. The interactions between soybean plants and engineered nanomaterials are discussed in terms of positive and negative impacts on growth and production, metabolism and influences on the root-associated microbiota. Current data clearly suggests that under specific conditions, nanomaterials can negatively influence the development and metabolism of soybean plants. Moreover, in some cases, a possible risk of trophic transfer and transgenerational impact of engineered nanomaterials are suggested. Therefore, comprehensive risk-assessment studies should be carried out prior to any mass productions of potentially hazardous materials.

Effects of cerium oxide on rice seedlings as affected by co-exposure of cadmium and salt

Effects of CeO₂ NPs (200 mg.L^-1) on rice (Oryza sativa L.) alone or co-exposure with cadmium (Cd) and salt (sodium chloride, NaCl) were investigated in hydroponic systems for two weeks. Physiological results show that rice biomass was significantly inhibited when NaCl or CdCl₂ added alone or in co-exposure treatment. CeO₂ NPs significantly relieve the chlorophyll damage under CdCl₂ environmental stress. The presence of CeO₂ NPs alleviated both stressors induced damages to rice as indicated by the reduced proline level. Additionally, CeO₂ NPs triggered the antioxidant defense systems to counteract the oxidative stress caused by NaCl and CdCl₂. The level of 8-OHdG, one of the most important indicators for genotoxicity, in rice suggest that the presence of CeO₂ NPs reduced the DNA damage in NaCl treated rice. Elemental analysis indicated that co-exposure to NaCl and CdCl₂ slightly decreased the Cd content as compared to the one in the CdCl₂ alone treatment, and this co-exposure also significantly reduced the Na content when comparing with the NaCl alone treatment. Taken together, our findings suggest that CeO₂ NPs could alleviate the CdCl₂ and NaCl stresses, but could not completely change the phenotype of both contaminants treated rice.

The Role of Nanotechnology in the Fortification of Plant Nutrients and Improvement of Crop Production

Nutrient deficiency in food crops is seriously affecting human health, especially those in the rural areas, and nanotechnology may become the most sustainable approach to alleviating this challenge. There are several ways of fortifying the nutrients in food such as dietary diversification, use of drugs and industrial fortification. However, the affordability and sustainability of these methods have not been completely achieved. Plants absorb nutrients from fertilizers, but most conventional fertilizers have low nutrient use and uptake efficiency. Nanofertilizers are, therefore, engineered to be target oriented and not easily lost. This review surveys the effects of the addition of macro- and nanonutrients to soil, the interaction, and the absorption capability of the plants, the environmental effect and food content of the nutrients. Most reports were obtained from recent works, and they show that plants nutrients could be enriched by applying nanoparticulate nutrients, which are easily absorbed by the plant. Although there are some toxicity issues associated with the use of nanoparticles in crop, biologically synthesized nanoparticles may be preferred for agricultural purposes. This would circumvent the concerns associated with toxicity, in addition to being pollution free. This report, therefore, offers more understanding on the application of nanotechnology in biofortification of plant nutrients and the future possibilities offered by this practice. It also highlights some of the ills associated with the introduction of nanomaterials into the soil for crop’s improvement.

Metallic nanoparticles influence the structure and function of the photosynthetic apparatus in plants

The applications of nanoparticles continue to expand into areas as diverse as medicine, bioremediation, cosmetics, pharmacology and various industries, including agri-food production. The widespread use of nanoparticles has generated concerns given the impact these nanoparticles - mostly metal-based such as CuO, Ag, Au, CeO₂, TiO₂, ZnO, Co, and Pt - could be having on plants. Some of the most studied variables are plant growth, development, production of biomass, and ultimately oxidative stress and photosynthesis. A systematic appraisal of information about the impact of nanoparticles on these processes is needed to enhance our understanding of the effects of metallic nanoparticles and oxides on the structure and function on the plant photosynthetic apparatus. Most nanoparticles studied, especially CuO and Ag, had a detrimental impact on the structure and function of the photosynthetic apparatus. Nanoparticles led to a decrease in concentration of photosynthetic pigments, especially chlorophyll, and disruption of grana and other malformations in chloroplasts. Regarding the functions of the photosynthetic apparatus, nanoparticles were associated with a decrease in the photosynthetic efficiency of photosystem II and decreased net photosynthesis. However, CeO₂ and TiO₂ nanoparticles may have a positive effect on photosynthetic efficiency, mainly due to an increase in electron flow between the photosystems II and I in the Hill reaction, as well as an increase in Rubisco activity in the Calvin and Benson cycle. Nevertheless, the underlying mechanisms are poorly understood. The future mechanistic work needs to be aimed at characterizing the enhancing effect of nanoparticles on the active generation of ATP and NADPH, carbon fixation and its incorporation into primary molecules such as photo-assimilates.