Assessment of oral and lung bioaccessibility of Cd and Pb from smelter-impacted dust

Oral bioaccessibility of potentially toxic elements in various urban environmental media

An important aspect of geochemical studies is determining health hazard of potentially toxic elements (PTEs). Key information on PTEs behaviour in the human body in case of their ingestion is provided with the use of in vitro bioaccessibility tests. We analysed and compared oral bioaccessibility of a wide range of PTEs (As, Cd, Ce, Cr, Cu, Hg, La, Li, Ni, Pb, Sb, Sn, Zn), including some that are not often studied but might pose a human health hazard, in soil, attic dust, street dust, and household dust, using Unified BARGE Method (UBM). Additionally, feasibility of usage of scanning electron microscope techniques in analyses of solid residuals of UBM phases was tested. Results show that bioaccessible fractions (BAFs) of PTEs vary significantly between individual samples of the same medium, between different media and between the gastric and gastro-intestinal phases. In soil, attic dust and street dust, bioaccessibility of individual PTE is mostly higher in gastric than in gastro-intestinal phase. The opposite is true for PTEs in household dust. In all four media, with the exception of Pb in household dust, among the most bioaccessible PTEs in gastric phase are Cd, Cu, Pb, and Zn. During the transition from the stomach to small intestine, the mean BAFs of most elements in soil, attic dust, and street dust decreases. The most bioaccessible PTEs in gastro-intestinal phase are Cu, Cd, Ni, and As. Micromorphological and chemical characterisation at individual particle level before and after bioaccessibility test contribute significantly to the understanding of oral bioaccessibility.

Exposure risks of lead and other metals to humans: A consideration of specific size fraction and methodology

Particle size is a critical influencing factor in assessing human exposure risk as fine particles are generally more hazardous than larger coarse particles. However, how particle composition influences human health risk is only poorly understood as different studies have different utilised different definitions and as a consequence there is no consensus. Here, with a new methodology taking insights of each size fraction load (%GSFload), metal bioaccessibility, we classify which specific particle size can reliably estimate the human exposure risk of lead and other metals. We then validate these by correlating the metals in each size fraction with those in human blood, hair, crop grain and different anthropogenic sources. Although increasing health risks are linked to metal concentration these increase as particle size decrease, the adjusted-risk for each size fraction differs when %GSFload is introduced to the risk assessment program. When using a single size fraction (250-50 µm, 50-5 µm, 5-1 µm, and < 1 µm) for comparison, the risk may be either over- or under-estimated. However, by considering bulk and adjusting the risk, it would be possible to obtain results that are closer to the real scenarios, which have been validated through human responses and evidence from crops. Fine particle size fractions (< 5 µm) bearing the mineral crystalline or aggregates (CaCO3, Fe3O4, Fe2O3, CaHPO4, Pb5(PO4)3Cl) alter the accumulation, chemical speciation, and fate of metals in soil/dust/sediment from the different sources. Loaded lead in the size fraction of < 50 µm has a significantly higher positive association with the risk-receptor biomarkers (BLLs, Hair Pb, Corn Pb, and Crop Pb) than other size fractions (bulk and 50-250 µm). Thus, we conclude that the < 50 µm fraction would be likely to be recommended as a reliable fraction to include in a risk assessment program. This methodology acts as a valuable instrument for future research undertakings, highlighting the importance of choosing suitable size fractions and attaining improved accuracy in risk assessment results that can be effectively compared.

Bioaccessible metals in dust materials from non-sulfide Zn deposit and related hydrometallurgical operation

Mining and processing of ores in arid (desert) areas generates high amounts of dust, which might be enriched in potentially harmful elements. We studied dust fractions of ores, soils, and technological materials from mining and related hydrometallurgical operation at former Skorpion Zinc non-sulfide Zn deposit in southern Namibia (closed and placed under maintenance in 2020). Chemical and mineralogical investigation was combined with oral bioaccessibility testing of fine dust fractions (<48 μm and <10 μm) in simulated gastric fluid (SGF) to assess potential risk of intake of metallic contaminants (Cd, Cu, Pb, Zn) for staff operating in the area. The bulk metals concentrations were largely variable and ranked as follows: soils < tailings ≪ Skorpion ores < imported ores and dross used for feed ore blending. Maximum contaminant concentrations in the original granular materials were 927 mg Cd/kg, 9150 mg Cu/kg, 50 g Pb/kg and 706 g Zn/kg, respectively, and generally increased as a function of decreasing grain size. The highest bioaccessible concentrations of Cd and Pb yielded imported ores from Taiwan and Turkey and, together with the milled dross, these samples also exhibited the highest Zn bioaccessibilities. The exposure estimates calculated for a worker (weighing 70 kg) in this mining/ore processing operation at a dust ingestion rate of 100 mg/day indicated that most dust samples (soils, tailings, Skorpion ores) exhibited metals intake values far below tolerable daily intake limits. The overall health risk was limited in all mining and ore processing areas except for the ore blending area, where imported ores and recycled dross enriched in bioaccessible Cd, Pb and/or Zn were used for the ore blending. Safety measures required by the mine operator (wearing of masks by the operating staff) helped to prevent the staff's exposure to potentially contaminated dust even in this blending ore area.

Influence of sebum proportion in synthetic sweat on dermal bioaccessibility and on permeation of metal(loid)s from contaminated soils

Even if dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure, the human health risk can be significant for some contaminants and exposure scenarios. The purpose of this study was to assess the influence of sebum proportion (1% v/v and 3% v/v) in two synthetic sweat formulations (EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)) on As, Cr, Cu, Ni, Pb, and Zn dermal bioaccessibility and on subsequent diffusion through synthetic skin. A Franz cell with a Strat-M® membrane was used to quantify permeation parameters of bioaccessible metal(loid)s. Sebum's presence in synthetic sweat formulations significantly modified bioaccessibility percentages for As, Cr, and Cu. However, sebum proportion in both sweats did not influence the bioaccessibility of Pb and Zn. Some metal(loid)s, namely As and Cu, permeated the synthetic skin membrane during permeation tests when sebum was added to sweat while no permeation was observed without sebum in sweat formulations. Depending on sweat formulation, the addition of sebum (1% v/v) increased or decreased the Cr permeation coefficients (Kp). In all cases, bioaccessible Cr was no longer permeable when extracted with 3% sebum. Ni transdermal permeation was not influenced by the presence of sebum, and no permeation was observed for Pb and Zn. Further studies on the speciation of metal(loid)s in bioaccessible extracts in the presence of sebum are recommended.

Oxidative stress indices induced by industrial and urban PM2.5-bound metals in A549 cells

The detrimental effects of atmospheric fine particulate matter (PM_2.5) on human health are of major global concern. PM_2.5-bound metals are toxic compounds that contribute to cellular damage. To investigate the toxic effects of water-soluble metals on human lung epithelial cells and their bioaccessibility to lung fluid, PM_2.5 samples were collected from both urban and industrial areas in the metropolitan city of Tabriz, Iran. Oxidative stress indices, including proline content, total antioxidant capacity (TAC), cytotoxicity, and DNA damage levels of water-soluble components of PM_2.5, were evaluated. Furthermore, an in vitro test was conducted to assess the bioaccessibility of various PM_2.5-bound metals to the respiratory system using simulated lung fluid. PM_2.5 average concentrations in urban and industrial areas were 83.11 and 97.71 μg/m³, respectively. The cytotoxicity effects of PM_2.5 water-soluble constituents from urban areas were significantly higher than in industrial areas and the IC₅₀ was found to be 96.76 ± 3.34 and 201.31 ± 5.96 μg/mL for urban and industrial PM_2.5 samples, respectively. In addition, higher PM_2.5 concentrations increased the proline content in a concentration-dependent manner in A549 cells, which plays a protective role against oxidative stress and prevents PM_2.5-induced DNA damage. Also, the partial least squares regression revealed that Be, Cd, Co, Ni, and Cr, were significantly correlated with DNA damage and proline accumulation, which caused cell damage through oxidative stress. The results of this study showed that PM_2.5-bound metals in highly polluted metropolitan city caused substantial changes in the cellular proline content, DNA damage levels and cytotoxicity in human lung A549 cells.

Estimating the proportion of bioaccessible lead (BaPb) in household dust wipe samples: a comparison of IVBA and PBET methods

Established methods for using standardized dust wipes to collect and measure total lead in household dust are readily available but the use of dust wipes to measure bioaccessible lead (BaPb) is less clear. This study compared two in vitro methods for estimating the proportion of BaPb in dust collected into dust wipes including the US-EPA's in-vitro bioaccessible assay (IVBA) method at two pH (1.5 and 2.5) values; and the physiologically based extraction test (PBET 2.5 pH). Two types of simulated household dust samples (Pb-soil contaminated and Pb-paint contaminated) each with three Pb concentrations were created. Equal amounts of simulated dust were applied to a smooth surface and collected following the standard EPA dust wipe protocol and were analyzed for BaPb and total Pb (ASTM-E1644-17, ICP-OES). Estimated BaPb levels differed significantly by the method of extraction. Mean percent BaPb were IVBA pH 1.5, > 90% (Pb-paint) and 59-63% (Pb-soil); IVBA pH 2.5 78-86% (Pb-paint) and 45-50% (Pb-soil); PBET pH 2.5 56 to 61% (Pb-paint) and 41-50% Pb-soil). Particularly for lead-paint contaminated dust, PBET showed significantly greater discrimination as suggested by the broader range of BaPb values and closer approximation to total lead concentrations in simulated household dust samples.

Combining DGT with bioaccessibility methods as tool to estimate potential bioavailability and release of PTEs in the urban soil environment

Potentially toxic elements (PTEs) in urban soil environments pose a noticeable risk to both ecosystem and human health; however, only a fraction of the elemental content is available for biota. To better know the potential risk of PTEs in the urban soil environment, geochemical fractionation, bioaccessibility, and potential bioavailability of four PTEs (Cd, Cu, Pb, and Zn) were investigated by the combined use of different methods. The results showed that a high non-residual chemical fraction is related to a high bioavailability of the selected elements. The ranges of labile concentration of Cu, Zn, Cd and Pb in all sampling sites measured by diffusive gradients in thin films (DGT) were 3.5-18.0, 14.2-26.5, 0.09-1.0, and 1.8-15.7 μg/L, respectively. The high non-residual contents pointed out a serious hazard to the urban environment. The bioaccessible concentrations in gastric and lung phases were closely positively correlated with DGT-measured content (r = 0.63-0.99, p < 0.05), suggesting the potential use of DGT for the prediction of PTEs risk to human health. Moreover, the correlation of DGT results with the soluble and reducible fractions of PTEs may allow DGT use for quick screenings of the PTEs fraction potentially mobilizable during flooding events in urban soil environments. Our study suggests that combing DGT, bioaccessibility and biogeochemical fractionation could provide a more accurate assessment of the urban environmental quality and be helpful for pollution control and urban planning.

Contaminant Binding and Bioaccessibility in the Dust From the Ni-Cu Mining/Smelting District of Selebi-Phikwe (Botswana)

We studied the dust fractions of the smelting slag, mine tailings, and soil from the former Ni-Cu mining and processing district in Selebi-Phikwe (eastern Botswana). Multi-method chemical and mineralogical investigations were combined with oral bioaccessibility testing of the fine dust fractions (<48  and <10 μm) in a simulated gastric fluid to assess the potential risk of the intake of metal(loid)s contaminants. The total concentrations of the major contaminants varied significantly (Cu: 301-9,600 mg/kg, Ni: 850-7,000 mg/kg, Co: 48-791 mg/kg) but were generally higher in the finer dust fractions. The highest bioaccessible concentrations of Co, Cu, and Ni were found in the slag and mine tailing dusts, where these metals were mostly bound in sulfides (pentlandite, pyrrhotite, chalcopyrite). On the contrary, the soil dusts exhibited substantially lower bioaccessible fractions of these metals due to their binding in less soluble spinel-group oxides. The results indicate that slag dusts are assumed to be risk materials, especially when children are considered as a target group. Still, this exposure scenario seems unrealistic due to (a) the fencing of the former mine area and its inaccessibility to the local community and (b) the low proportion of the fine particles in the granulated slag dump and improbability of their transport by wind. The human health risk related to the incidental ingestion of the soil dust, the most accessible to the local population, seems to be quite limited in the Selebi-Phikwe area, even when a higher dust ingestion rate (280 mg/d) is considered.

Impact of smelter re-development on spatial and temporal airborne Pb concentrations

Total suspended particulate (TSP) and PM₁₀ filters collected from two ambient air monitoring stations in Port Pirie were analysed to determine the impact of a lead (Pb) smelter redevelopment on air quality parameters including total elemental concentration, Pb isotopic ratio, Pb bioaccessibility and Pb speciation. Filters from 2009 to 2020 were analysed with a focus on samples from 2017 (immediately prior to smelter redevelopment) and 2020 (post-smelter redevelopment). Lead concentration in 2009-2020 TSP was variable ranging up to 6.94 μg m^-3 (mean = 0.57 μg m^-3), however, no significant decrease in Pb concentration was observed at either Port Pirie West (p = 0.56, n = 34) or Oliver Street (p = 0.32, n = 28) monitoring stations when 2017 and 2020 TSP values were compared. Similarly, no significant difference (p = 0.42) in PM₁₀ Pb concentration was observed in 2017 (mean = 0.80 μg m^-3) and 2020 (0.60 μg m^-3) Oliver Street filters. Although no change in percentage Pb bioaccessibility was observed when 2017 and 2020 Port Pirie West TSP samples were compared (mean of 88.7% versus 88.0%), Pb bioaccessibility was lower (p < 0.005) in both 2020 TSP (mean of 83.9% versus 62.9%) and PM₁₀ (mean of 70.8% versus 58.3%) Oliver Street filters compared to 2017. While scanning electron microscopy, energy dispersive x-ray spectroscopy identified a number of Pb phases within filters (galena, anglesite, cerussite, conglomerates), differences in Pb speciation between 2017 and 2020 filters could not be identified although it was presumed that this influenced Pb bioaccessibility outcomes at Oliver Street. Data from this study suggests that recent smelter redevelopments have not significantly decreased the concentrations of airborne Pb in Port Pirie although re-entrainment of soil-Pb from historical impact may also be a contributing Pb source.

Bioaccessibility of arsenic from contaminated soils and alteration of the gut microbiome in an in vitro gastrointestinal model

Arsenic exposure has been reported to alter the gut microbiome in mice. Activity of the gut microbiome derived from fecal microbiota has been found to affect arsenic bioaccessibility in an in vitro gastrointestinal (GI) model. Only a few studies have explored the relation between arsenic exposure and changes in the composition of the gut microbiome and in arsenic bioaccessibility. Here, we used simulated GI model system (GIMS) containing a stomach, small intestine, colon phases and microorganisms obtained from mouse feces (GIMS-F) and cecal contents (GIMS-C) to assess whether exposure to arsenic-contaminated soils affect the gut microbiome and whether composition of the gut microbiome affects arsenic bioaccessibility. Soils contaminated with arsenic did not alter gut microbiome composition in GIMS-F colon phase. In contrast, arsenic exposure resulted in the decline of bacteria in GIMS-C, including members of Clostridiaceae, Rikenellaceae, and Parabacteroides due to greater diversity and variability in microbial sensitivity to arsenic exposure. Arsenic bioaccessibility was greatest in the acidic stomach phase of GIMS (pH 1.5-1.7); except for GIMS-C colon phase exposed to mining-impacted soil in which greater levels of arsenic solubilized likely due to microbiome effects. Physicochemical properties of different test soils likely influenced variability in arsenic bioaccessibility (GIMS-F bioaccessibility range: 8-37%, GIMS-C bioaccessibility range: 2-18%) observed in this study.

In situ and ex situ bioassays with Cantareus aspersus for environmental risk assessment of metal(loid) and PAH-contaminated soils

Environmental risk assessment of contaminated soils requires bioindicators that allow the assessment of bioavailability and toxicity of chemicals. Although many bioassays can determine the ecotoxicity of soil samples in the laboratory, few are available and standardized for on-site application. Bioassays based on specific threshold values that assess the in situ and ex situ bioavailability and risk of metal(loid)s and polycyclic aromatic hydrocarbons (PAHs) in soils to the land snail Cantareus aspersus have never been simultaneously applied to the same soils. The aims of this study were to compare the results provided by in situ and ex situ bioassays and to determine their respective importance for environmental risk assessment. The feasibility and reproducibility of the in situ bioassay were assessed using an international ring test. This study used five plots located at a former industrial site and six laboratories participated in the ring test. The results revealed the impact of environmental parameters on the bioavailability of metal(loid)s and PAHs to snails exposed in the field to structured soils and vegetation compared to those exposed under laboratory conditions to soil collected from the same field site (excavated soils). The risk coefficients were generally higher ex situ than in situ, with some exceptions (mainly due to Cd and Mo), which might be explained by the in situ contribution of plants and humus layer as sources of exposure of snails to contaminants and by climatic parameters. The ring test showed good agreement among laboratories, which determined the same levels of risk in most of the plots. Comparison of the bioavailability to land snails and the subsequent risk estimated in situ or ex situ highlighted the complementarity between both approaches in the environmental risk assessment of contaminated soils, namely, to guide decisions on the fate and future use of the sites (e.g., excavation, embankments, and land restoration). Integr Environ Assess Manag 2022;18:539-554. © 2021 SETAC.

Arsenic and lead in soil: impacts on element mobility and bioaccessibility

Long-term brown coal mining contributes to risk element contents in soils surrounding coal basins. However, there is a lack of bioaccessibility characterization of the risk elements in the soils at the impacted locations for estimation of the potential health risk, in relation to the effects of soil particle size and element origin. In this study, soils from different geological areas (geogenic vs. anthropogenic) were sampled around the Most brown coal basin, Czech Republic. These soils were passed through sieves to obtain seven aggregate size fractions. For an estimation of the oral bioaccessibility of As and Pb in the size fractions, the physiologically based extraction test was applied, whereas the potential pulmonary bioaccessibility of the elements was estimated by using both Gamble's and Hatch's tests. The results showed that the geochemical pattern of the investigated elements clearly separates the soil samples collected from the mountain region (mineralization from geogenic processes) from those of the basin region (extensive coal mining). For As, the results indicated that it poses higher risks in the anthropogenically affected basin region due to its higher gastro-intestinal and pulmonary bioaccessibility in soil samples in this area. A higher bioaccessibility of As in the soils was recorded in the finer grain size fractions, which are usually air-borne and can be easily ingested and/or inhaled, leading to potential health risks to humans and livestock. The opposite pattern, with a higher content on coarse particles, was recorded for Pb, indicating a potential risk of livestock in the non-forest mountainous areas.

Improving the predictive value of bioaccessibility assays and their use to provide mechanistic insights into bioavailability for toxic metals/metalloids - A research prospectus

Widespread contamination of soil, dust, and food with toxic metal(loid)s pose a significant public health concern. Only a portion of orally ingested metal(loid) contaminants are bioavailable, which is defined as the fraction of ingested metal(loid)s absorbed across the gastrointestinal barrier and into systemic circulation. Bioaccessibility tools are a class of in vitro assays used as a surrogate to estimate risk of oral exposure and bioavailability. Although development and use of bioaccessibility tools have contributed to our understanding of the factors influencing oral bioavailability of metal(loid)s, some of these assays may lack data that support their use in decisions concerning adverse health risks and soil remediation. This review discusses the factors known to influence bioaccessibility of metal(loid) contaminants and evaluates experimental approaches and key findings of SW-846 Test Method 1340, Unified BARGE Method, Simulated Human Intestinal Microbial Ecosystem, Solubility Bioaccessibility Research Consortium assay, In Vitro Gastrointestinal model, TNO-Gastrointestinal Model, and Dutch National Institute for Public Health and the Environment bioaccessibility models which are used to assess oral absolute bioavailability and relative bioavailability in solid matrices. The aim of this review was to identify emerging knowledge gaps and research needs with an emphasis on research required to evaluate these models on (1) standardization of assay techniques and methodology, and (2) use of common criteria for assessing the performance of bioaccessibility models.

Health risk assessment via ingestion and inhalation of soil PTE of an urban area

Potentially Toxic Elements (PTE) are common soil contaminants and pose a significant risk to human health. In this study, ingestion (<150 μm) and inhalation (<10 μm) bioaccessibility and human health risk due to PTE were investigated in soils of the urban and peri-urban area of Torino. Lead, Cd, Cu, and Zn were observed to be the most soluble elements in simulated gastric and lung fluids. Higher bioaccessible concentrations of Pb, Ni, Co and Sb were observed in the inhalable size fraction (<10 μm) compared to ingestible one probably because of the higher concentration in fine soil size fraction. Conversely, the relative bioaccessibility of Pb, Cu, Cd, Zn and As was lower, due to the different extracting conditions and to the presumable different elemental speciation. Average values suggested that PTE would be more bioavailable if ingested than inhaled, particularly in urban areas, were the bioaccessible percentages were always higher than in peri-urban sites. Health risk assessment was conducted using bioaccessible concentrations and their corresponding toxicities via ingestion and inhalation exposures. Unacceptable non-carcinogenic risk (HQ > 1) was found through ingestion exposure for children in some urban sites and Pb was the most hazardous elements. Carcinogenic risks were under the threshold levels for every soil (CR < 10^-4), with Cr and As being the dominant contributors to risk. Therefore, necessary soil remediation activities are needed to reduce the risks of human, especially for children, exposure to Pb.

Oral and inhalation bioaccessibility of potentially toxic elements in household dust from former Hg mining district, Idrija, Slovenia

One of the main sources of potential chronic exposure to potentially toxic elements is household dust, especially in an environment with known point sources of PTE pollution. The literature review clearly shows that the total concentrations of an element in the environment do not provide information to predict its bioavailability. The aim of the present study was to evaluate the oral and inhalation bioaccessibility of PTE present in household dust in the small town of Idrija, the site of the former mercury mine. Unified bioaccessibility method was used to assess oral bioaccessibility of PTE in the stomach and intestine, while inhalation bioaccessibility was assessed by extraction of household dust samples with two synthetic extraction solutions-Gamble's solution (GS) and artificial lysosomal fluid (ALF). A low bioaccessibility of mercury was observed in all synthetic solutions (less than 3%). The highest bioaccessibility of PTE was observed in ALF solution, especially for Zn, Pb and Cd. Only a slightly lower bioaccessibility of these three elements was also observed in the stomach, while the bioaccessibility of other elements in the gastric phase was less than 40%. In general, the bioaccessibility of all elements decreased in the intestine. With the exception of Cr, the lowest bioaccessibility of the elements was observed in GS. Daily ingestion and inhalation doses of PTE from household dust were calculated and their values were below the available recommended or tolerable daily intakes of PTE from food according to the European Food Safety Authority.

Tracing the sources of bioaccessible metal(loid)s in urban environments: A multidisciplinary approach

Understanding the links between sources of magnetic particles and bioaccessibility of metal(loids) in environmental sampling media is crucial for better evaluating human health risks, although relevant information in the scientific literature is scarce. Here, soil, road and house dust samples from a heavy industrial area in Greece were characterized in a multidisciplinary study combining magnetic measurements, SEM/EDS analyses, bioaccessibility measurements and Pb isotopic analyses of bioaccessible Pb. The oral and inhalable bioaccessible fractions of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were assessed by applying simulated gastric and lung solutions. SEM/EDS analysis revealed the abundant presence of anthropogenic Fe-containing spherules of industrial origin in all sampling media, often containing minor contents of Cr, Cu, Mn, Pb and Zn. The inhalation bioaccessibility (%) in all environmental compartments was higher than the oral one for most elements analyzed in the present study. Clear associations between magnetic susceptibility and bioaccessible amounts of most of analyzed elements were encountered for the soil and road dust. The isotopic analyses of bioaccessible Pb showed that there are significant differences in the isotopic ratios between total and bioaccessible Pb. We conclude that Pb solubilized by the simulated gastric and lung extractions is principally anthropogenic, representing a mixture of industrial Pb and Pb related to the past usage of leaded petrol. Low values of ²⁰⁶Pb/²⁰⁷Pb were accompanied by high bioaccessible contents of Cd, Pb and Zn indicating that anthropogenic (mostly industrial) sources exert influence on the bioaccessible forms of these metals. Coupling magnetic and bioaccessibility measurements with stable isotopic technique of bioaccessible Pb is more reliable for determining Pb and other metal sources with high oral and inhalation bioaccessibility.

Characterising and communicating the potential hazard posed by potentially toxic elements in indoor dusts from schools across Lagos, Nigeria

Ambient and indoor air pollution results in an estimated 7 million premature deaths globally each year, representing a major contemporary public health challenge, but one poorly quantified from a toxicological and source perspective. Indoor exposure represents possibly the greatest potential overall exposure, yet our indoor environments are still poorly understood, modelled and characterized. In rapidly growing cities, such as Lagos, Nigeria, environmental monitoring can play an important role in establishing baseline data, monitoring urban pollution trends and in environmental education. Classroom dust samples were collected from 40 locations from across the twenty local government areas (LGAs) of Lagos, in June 2019. The aim of the study was to assess the potential hazard posed by PTE in indoor dusts and to develop a suitable risk communication strategy to inform and educate the public, promoting environmental health literacy. Concentrations of total PTE in indoor dusts were assessed using Energy Dispersive X-Ray Fluorescence (ED-XRF) spectrometry. Oral bioaccessibility determinations using the unified BARGE method, and analysis by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) were also performed on the dust samples to determine the fraction available for absorption in the gastrointestinal tract. Results showed that the indoor dust samples were largely uncontaminated, with only few exceptions (2 samples). Enrichment factor pollution trend for the total PTE concentrations was in the order of Pb > Zn > U > Cr > Cu > Ba > Mn > V > As > Cd > Ni > Al. Source apportionment studies using factor analysis suggests concentrations of Al, As, Fe, Mn, Ni, and U may be influenced largely by lithogenic factors, while Cd, Cu and Pb originated principally from anthropogenic sources. Chromium, V and Zn appear to originate from mixed sources of both lithogenic and anthropogenic origin. Our oral bioaccessibility determinations indicate that the assumption of 100% bioavailability based on pseudototal or total concentrations would overestimate the hazard potential of PTE in these indoor dusts. Zinc was the most bioaccessible PTE (mean of 88%), with Mn (57%), Pb (48%), Ba (48%), Al (41%), As (37%), Cu (36%), Ni (28%), Cr (10%) and Fe (7%) the least bioaccessible. Human health risk assessment, for both children and adults using the bioaccessible fraction, showed values to be within acceptable risk levels.

Metal(Loids) Bioaccessibility in Road Dust from the Surrounding Villages of an Active Mine

Human activities, in general, cause a significant impact on the environment and human health. The present study aims to characterize the road dust of villages located near an active mine and to assess metal(loids) bioaccessible fractions. From the collected road dust samples (<250 µm fraction), the pseudo total, gastric (G) and gastrointestinal (GI) phase (UBM assay) concentrations, mineralogical composition, enrichment factor (EF), and risk for humans were determined. The obtained results revealed that arsenic represents the highest risk to humans, with mean pseudototal values higher than the maximum reference value range. The enrichment factor pointed to As as having significant to very high enrichment in all of the villages. In addition, Cd presented the maximum EF values in all of the villages, and was thus classified as having a very high enrichment. Particles enriched in As, Ca, Fe, Cu, Al, and Ti were identified by SEM-EDS in weathered agglomerates, and were linked to mine wastes and long-distance transport through both wind and/or traffic. The arsenic bioaccessibility fraction (%BAF) presented low values in the studied samples, possibly because of the low complex solubility of Fe with adsorbed As, limiting the release of arsenic and reducing its bioaccessibility. The concentrations of bioaccessible Cd for the G and GI phases were within the reference range, while for Cu, they were above and for Pb they were lower than the reference value range. The results show that the pseudototal fraction risk is overestimated when compared with BAF%; nevertheless, the total G and GI risks were above the carcinogenic target risk (1 × 10−6) in most of the samples. The carcinogenic risk of the bioaccessible contaminants showed that As represented the higher risk for developing cancer over a lifetime, with ingestion being the main risk route.

In vitro assessments of bioaccessibility and bioavailability of PM2.5 trace metals in respiratory and digestive systems and their oxidative potential

Air pollution is a serious environmental issue. As a key aerosol component, PM_2.5 associated toxic trace metals pose significant health risks by inhalation and ingestion, but the evidences and mechanisms were insufficient and not well understood just by their total environmental concentrations. To accurately assess the potential risks of airborne metals, a series of in vitro physiologically based tests with synthetic human lung and gastrointestinal fluids were conducted to assess both the bioaccessibility and bioavailability of various PM_2.5 bound metals in the respiratory and digestive systems from both urban and industrial areas of Nanjing city. Moreover, the chemical acellular toxicity test [dithiothreitol (DTT) assay] and source analysis were performed. Generally, the bioaccessibility and bioavailability of investigated metals were element and body fluid dependent. Source oriented metals in PM_2.5 showed diverse bioaccessibility in different human organs. The PM_2.5 induced oxidative potential was mainly contributed by the bioaccessible/bioavailable transition metals such as Fe, Ni and Co from metallurgic dust and traffic emission. Future researches on the toxicological mechanisms of airborne metals incorporating the bioaccessibility, bioavailability and toxicity tests are directions.

Soil particle size fraction and potentially toxic elements bioaccessibility: A review

In the last decade, extensive studies have been conducted to quantify the influence of different factors on potentially toxic elements (PTE) bioaccessibility in soil; one of the most important is soil size fraction. However, there is no agreement about the size fraction and the methods to investigate bioaccessibility, as very few review articles are available on soil PTE bioaccessibility and none addressed the influence of particle size on PTE bioaccessibility. This study provides a review of the relations between PTE bioaccessibility and soil particle size fractions. The available research indicates that PTE bioaccessibility distribution across different size fractions varies widely in soil, but a general trend of higher bioaccessibility in finer size fraction was found. The different elements may exhibit different relationships between bioaccessibility and soil size fraction and, in some cases, their bioaccessibility seems to be more related to the source and to the chemico-physical form of PTE in soil. Often, soil pollution and related health risk are assessed based on PTE total concentration rather than their bioaccessible fraction, but from the available studies it appears that consensus must be pursued on the methods to determine PTE bioaccessibility in the fine soil size fractions to achieve a more accurate human health risk assessment.

Human health risk assessment for toxic elements in the extreme ambient dust conditions observed in Sistan, Iran

This study evaluates the bioaccessibility and health risks related to heavy metals (Cd, Cr, Co, Cu, Mn, Ni, Pb, Zn and metalloid As) in airborne dust samples (TSP and PM_2.5) in Zabol, Iran during the summer dust period, when peak concentration levels of PM are typically observed. High bioaccessibilities of carcinogenic metals in PM_2.5 (i.e. 53.3%, 48.6% and 47.6% for Ni, Cr and As, respectively) were calculated. The carcinogenic and non-carcinogenic health risks were assessed for three exposure pathways (inhalation, ingestion and dermal contact), separately for children and adults. Non-carcinogenic inhalation risks were very high (Hazard Index: HI > 1) both for children and adults, while the carcinogenic risks were above the upper acceptable threshold of 10^-4 for adults and marginally close (5.0-8.4 × 10^-5) for children. High carcinogenic risks (>10^-4) were found for the ingestion pathway both for children and adults, while HI values > 1 (8.2) were estimated for children. Carcinogenic and non-carcinogenic risk estimates for dermal contact were also above the limits considered acceptable, except for the carcinogenic risk for children (7.6 × 10^-5). Higher non-carcinogenic and carcinogenic risks (integrated for all elements) were associated with the inhalation pathway in adults and children with the exception of carcinogenic risk for children, where the ingestion route remains the most important, while As was linked with the highest risks for nearly all exposure pathways. A comparative evaluation shows that health risks related with toxic elements in airborne particles in Sistan are among the highest reported in the world.

Investigating the relationship between speciation and oral/lung bioaccessibility of a highly contaminated tailing: contribution in health risk assessment

Anthropogenic activities such as industrial, mining, or agricultural are the main sources of environmental contamination. One of the most problematic contaminations concerns metals and metalloids from mining activities. This contamination raises the question of the environmental risk induced and the spread of this pollution (geographical and trophic) and the associated health risk. The integrated, multi-analytical approach of this study conducted on the mining district of Cartagena-La Union (Murcia, Spain) as part of the Interreg SUDOE European project "Soil Take Care" aims to (i) precisely define the speciation of contaminants of interest (Zn, Pb, Cd, As), (ii) predict the environmental risk related to storage stability, and (iii) establish the link between the speciation of the bearing phases and the associated health risk. To do this, a representative zone in the Cartagena-La Union mining district close to the populations was chosen. A physic-chemical characterization of the samples was performed (pH, electrical conductivity, CEC, and total metal(loid) concentrations), and the mineralogy was determined using XRD and SEM-EDS. The environmental risk was highlighted from sequential BCR-type extractions and EN-12457 leaching tests. Finally, the health risk was defined using the PSF inhalation bioaccessibility test and UBM bioaccessibility protocol (based on an operational chemical methodology mimicking soil ingestion and its residence in the gastrointestinal tract of the human body). These analyses revealed 2 groups of samples with distinct behavior. The first group of samples presents relatively stable bearing phases, mainly found in the residual fraction (As and Pb), presenting only a low health risk (very low bioaccessible). The second group consists of Cd and/or Zn-bearing phases, mainly labile (resulting from dissolution/precipitation phenomena), while gastric bioaccessibility reaches more than 85%. Note that Pb, Cd, and Zn have the potential to cause non-carcinogenic risks to children and As and Pb present a carcinogenic risk for children and adults even if only the bioaccessible fraction is considered. It has therefore been shown that the meteoric alteration of the tailing induces a change in speciation leads to an increase in environmental and health risks. These results are essential because they highlight the need for an integrated approach in order to clearly highlight the presence of risks but also that this approach will allow a better understanding of the potential rehabilitation path of this site.

The relevance of particle size distribution and bioaccessibility on human health risk assessment for trace elements measured in indoor dust

Trace metal contaminants in indoor dust pose a significant potential exposure risk to people because of the time spent indoors and the readily ingested and inhaled fine-grained composition of indoor dusts. However, there is limited trace metal data available on the specific interaction of dust particle size fraction and their respective bioaccessibility/bioavailability and its consequent effect on health risk assessment. This study addresses this knowledge gap by examining bioaccessible and bioavailable trace element concentrations (As, Cr, Cu, Mn, Ni, Pb, Zn) in 152 discrete size fractions from 38 indoor vacuum samples from a larger dataset (n = 376) of indoor dust from Sydney, Australia. Arsenic, Cu, Ni, Pb and Zn were most concentrated in the 90-150 μm fraction with Cr and Mn being more concentrated in < 45 μm fraction. Dust particle size fractions < 45 μm, 45-90 μm, 90-150 μm and 150-250 μm were analysed for their individual gastric phase (G-alone) in vitro trace element bioaccessibilities. Lead exposure risk was estimated using the United States Environmental Protection Agency's Integrated Exposure Uptake Biokinetic (IEUBK) children's model. Mean Pb bioaccessibility was 59.6%, 42%, 62% and 62.2% for < 45 μm, 45-90 μm, 90-150 μm, and 150-250 μm, respectively. Mean Pb absolute bioavailability (ABA) was lower at 26.2%, 18.4%, 27.2% and 27.3% for size fractions < 45 μm, 45-90 μm, 90-150 μm, and 150-250 μm, respectively. The predicted blood Pb (PbB) levels for a hypothetical child aged 1 to 3 years for each of the dust particle size fractions was > 5 μg/dL. Lead concentrations measured in the selected dust samples show a potential for adverse health impacts on young children with the greatest risk being from indoor dust sized 90-150 μm.

Metal bioaccessibility, particle size distribution and polydispersity of playground dust in synthetic lysosomal fluids

Inhalation of playground dust-derived fine particles in schoolyards poses a risk from exposure to metal(oids) and minerals. In this work, we obtained the total concentration and bioaccessibility of metal(oids) with Gamble Solution (GS) and Artificial Lysosomal Fluid (ALF) synthetic solutions, simulating the extracellular neutral pH environment of the lung and the intracellular conditions of the macrophage, respectively. Scanning Electron Microscope (SEM), and Dynamic Light Scattering analysis (DLS) techniques were used to characterize particles with a size smaller than 2.5 μm, which can be assimilated by macrophages in the deep part of the lung. Arsenic (As), lead (Pb), copper (Cu), manganese (Mn), zinc (Zn), and iron (Fe) showed concentrations of 39.9, 147.9, 286, 1369, 2313, 112,457 mg·kg^-1, respectively. The results indicated that all studied elements were enriched when compared to (i) local geochemical background and (ii) findings reported in other cities around the world. Bioaccessibility of metal(oids) in GS was low-moderate for most studied elements. However, in ALF assays, bioaccessibility was high among the samples: for lead (Pb = 34-100%), arsenic (As = 14.7-100%), copper (Cu = 17.9-100%), and zinc (Zn = 35-52%) possibly related to hydrophobic minerals in dust. SEM and DLS image analysis showed that playground dust particles smaller than 2.5 μm are dominant, particularly particles with a size range of 500-600 nm. The polydispersity detected in these particle sizes showed that most of them might be crystalline compounds (elongated shapes) forming agglomerates instead of combustion particles (spheres). Moreover, the circularity detected varies from 0.57 to 0.79 (low roundness), which corroborates this finding. The presence of agglomerates of ultrafine/nanoparticles containing highly bioaccessible metals in playground sites may have severe implications in children's health. Therefore, further studies are required to characterize the size distribution, structure, shape and composition of such minerals which are essential factors related to the toxicology of inhaled dust particles.

In vitro lung and gastrointestinal bioaccessibility of potentially toxic metals in Pb-contaminated alkaline urban soil: The role of particle size fractions

Potentially toxic metals (PTMs), associated with different size particles in soil, may play an important role in adverse health effect and risk for human. The objective is to evaluate the lung and gastrointestinal bioaccessibility and risk of PTMs in Pb-contaminated alkaline urban soil depending on the particle size fractions. The size fractions of 50-250 μm, 5-50 μm, 1-5 μm, <1 μm in Pb-contaminated alkaline urban soil from Baoji Heavy Industrial Base City, NW China, were screened by Sequential Wet Sieving Separation Procedure (SWSSP) based on Stokes' Law. The concentrations of 9 potentially toxic metals (As, Ba, Co, Cr, Cu, Mn, Ni, Pb and Zn) in each particle size fractions were characterized by ICP-OES and ICP-MS, and the in vitro bioaccessibility dependent of size fractions were evaluated by the simulation fluids of Artificial Lysosomal Fluid (ALF) and Gamble for lung, PBET, SBET, IVG, SBRC, UBM for gastric and intestinal, respectively. Health risks were assessed considering simulated external exposure using intestinal and lung bioaccessibility. The lung and gastrointestinal bioaccessibility and exposure risks of PTMs in fine particle size (i.e. <1 μm) was higher than larger particle size fractions (i.e. 50-250 μm, 5-50 μm, 1-5 μm), however, some different variations of bioaccessibility observed the simulation fluids and time dependent. In case of single PTMs, the lung bioaccessibilities of PTMs in ALF were higher than those in Gamble fluids, most prominent in Co, Cu, Mn and Zn, while the gastrointestinal [G + I] bioaccessibility of PTMs was less than those in gastric [G], like Cu, Mn, Pb and Zn mostly. The non-carcinogenic risks of these PTMs to children via inhalation were acceptable and higher than those of adults, but reverse for carcinogenic risk. Comparatively, the non-carcinogenic and carcinogenic risks of PTMs via ingestion pathway were both higher than those for adults. Although the risks from ingestion were in acceptable range, the total carcinogenic risks for children were more than 10^-4, which would bring carcinogenic risks and should be paid attention to. It was noted that the toxic metal, Co in all size fractions was the most important contributor for noncarcinogenic risks and Cr mostly for carcinogenic risks via inhalation pathway for adults and children in local areas. However, Pb was the most important contributor for noncarcinogenic risk both for adults and children via ingestion pathway relative to Co and Cr for carcinogenic risks through hand-to-mouth ingestion. Those observations demonstrated the important role that the smaller particle fractionations in Pb-contaminated alkaline soil played in both bioaccessibility and the refinement of human health-risk assessments for the inhalation and ingestion pathway.

In vitro assessment of oral and respiratory bioaccesibility of trace elements of environmental concern in Greek fly ashes: Assessing health risk via ingestion and inhalation

Fly ash engender significant environmental and human health problems due to enhanced contents of potentially harmful trace elements (TrElems). This study aims to evaluate human exposure to TrElems via a combined ingestion (i.e., oral bioaccessibility) and inhalation (i.e., respiratory bioaccessibility) pathway. Five fly ash samples were collected from power plants operating in the main lignite basins of Greece, while the ingestible (<250 μm) and inhalable (<10 μm) particle size fractions were utilized. The Unified Bioaccessibility Method (UBM) was utilized to assess the oral bioaccessibility, while the respiratory bioaccessible fractions were extracted using the Artificial Lysosomal Fluid (ALF). All studied FAs exhibited significantly higher contents in Ba, Cr, Ni, V and Zn. Cadmium was presented relative enriched in the finer size fraction (<10 μm), while Ba, Co, Cr, Cu, Mn, Ni and V were depleted. The UBM-extractable concentrations fluctuated greatly among the studied FAs, while notably lower bioaccessible contents were recorded in the gastrointestinal phase. On the other hand, ALF-extractable concentrations were surprisingly higher than the corresponding UBM-extractable ones in the gastric phase. The oral bioaccessibility of the studied TrElems ranged from 12.5 to 100%, while respiratory bioaccessibility presented high values exceeding 45% on average. A significant effect of fly ash type on human bioaccessibility was revealed. Thus, high-Ca FAs exhibited significantly higher bioaccessibility of the studied TrElems via ingestion, while a relatively higher bioaccessibility via inhalation was observed for high-Si FAs. Regarding non-carcinogenic health risk via ingestion and inhalation, Cr and Co exhibited the highest HQ_ing and HQ_inh values, however there were significantly lower than safe level (HQ < 1). On the contrary, Cr was the dominant contributor to carcinogenic risk with CR values being well above threshold or even tolerable risk levels.

Bioaccessibility of metal(loid)s in soils to humans and their bioavailability to snails: A way to associate human health and ecotoxicological risk assessment?

Human health risk assessment (HHRA) and ecotoxicological risk assessment (ERA) of contaminated soils are frequently performed separately and based on total soil concentrations without considering the concepts of mobility, bioaccessibility and bioavailability. However, some chemical and biological assays rarely used in combination can be applied to more accurately assess the exposure of organisms to metal(loid)s and thus to better estimate the links between soil contamination and effects. For humans, the unified bioaccessibility method (UBM) assesses oral bioaccessibility, while for soil fauna such as land snails, the bioaccumulation test reflects the bioavailability of contaminants. The aim of this study is to explore the relationship between oral bioaccessibility and the bioavailability of arsenic, cadmium and lead in twenty-nine contaminated soils. The results show a modulation of bioaccumulation and bioaccessibility of metal(loid)s by soil physicochemical parameters (organic matter especially). For the three metal(loid)s studied, strong relationships were modelled between the UBM and snail tests (0.77 < r²_adj.<0.95), depending on the parameters of the linear regressions (contaminant and phases of the UBM test). The original models proposed demonstrate the feasibility of linking bioaccessibility to humans and bioavailability to snails and the relevance of their association for an integrative risk assessment of contaminated soils.

Effects of Soil Properties and Land Use Types on the Bioaccessibility of Cd, Pb, Cr, and Cu in Dongguan City, China

In order to determine the potential heavy metal contamination in soil across Dongguan City, 124 soil samples from seven land use types were collected, four heavy metals (Cd, Pb, Cr, and Cu) were analyzed. Total Cd, Cr, and Cu contents were significantly higher than the background values for Guangdong Province. Lead bioaccessibility in urban green land was lower than that in industrial and abandoned districts. The bioaccessibility of heavy metals was affected by total metal concentrations, soil properties, and land use types. The results showed that there was a negative correlation between the bioaccessibility of heavy metals (except for Cu) and their total concentrations. Soil pH and organic matter were the main factors affecting the bioaccessibility of Cd, Cr, Pb, and Cu in most land use types. Furthermore, sand, P, and clay also affected Pb, Cr, and Cu bioaccessibility. With the exception of the industrial zone periphery and urban green land, the bioaccessibility of heavy metals was mainly affected by clay.

Effects of soil particle size on metal bioaccessibility and health risk assessment

Oral ingestion is the main exposure pathway through which humans ingest trace metals in the soil, particularly for children. Metals in different soil particle size fractions may vary in terms of concentration and properties. Urban school/kindergarten soil samples were collected from three cities: Lanzhou in northwest China, Wuhan in central China, and Shenzhen in southeast China. Soil samples were classified according to particle size (<63 μm, 63-150 μm, 150-250 μm, and 250-2000 μm) to estimate the effects of soil particle size on the total content and bioaccessibility of metals (Cd, Cr, Cu, Ni, Pb, and Zn). Based on the results, we assessed whether the standard size <150 μm (containing < 63 μm and 63-150 μm), recommended by the Technical Review Workgroup (TRW) of the Environmental Protection Agency (EPA), and <250 μm (containing < 63 μm, 63-150 μm, and 150-250) recommended by the Bioaccessibility Research Group of Europe (BARGE), are suitable where the largest proportion adhering to hands is the finest soil (<63 μm). The results showed that different metals exhibited different relationships between soil particle size and content and between soil particle size and bioaccessibility. Pb and Zn generally exhibited the greatest bioaccessibility in the coarsest particle sizes (250-2000 μm); whereas the highest Ni bioaccessibility occurred in the finest sizes (<63 μm); the bioaccessibility of other metals did not exhibit any obvious relationships with particle size. When assessing health risks using bioaccessible metal content in the recommended soil particle size ranges (<150 μm and <250 μm) and in finer particles (<63 μm), the results for noncarcinogenic risks to children exhibited no obvious difference, while the actual carcinogenic risks may be underestimated with the use of soil particle size ranges < 150 μm and <250 μm. Therefore, when choosing an optimal particle size fraction to evaluate the health risk of oral soil ingestion, we recommend the use of the bioaccessible metal content in <63 μm soil fraction.

Effect of particulate organic matter fractions on the distribution of heavy metals with aided phytostabilization at a zinc smelting waste slag site

Particulate organic matter (POM) significantly affects the distribution of heavy metals in contaminated soil. However, the effect of POM on the fate of heavy metals during in situ-aided phytostabilization of waste slag is unclear. The objective of this study was to investigate the distributions of heavy metals such as Cu, Pb, Zn, and Cd in the POM fractions at a zinc smelting waste slag site under in situ-aided phytostabilization after five years. The results showed that the litters and residues of four plants-Arundo donax, Broussonetia papyrifera, Cryptomeria fortunei, and Robinia pseudoacacia-decomposed to form different POM size fractions. The percentage of the 0.05-0.25 mm POM size fraction was the highest, followed by the >1 mm and 0.5-1 mm POM size fractions, and that of the 0.25-0.5 mm POM size fraction was the lowest. The masses of POM derived from the four plants were in the following order: C. fortunei > B. papyrifera > A. donax > R. pseudoacacia. The contents, enrichment coefficients, and mass loads of heavy metals such as Cu, Pb, Zn, and Cd in the POM increased with decreasing POM size, and those in the 0.05-0.25 mm POM size fraction were the highest. The mass load of heavy metals in the POM occurred in the following order: Cu > Cd > Zn > Pb. The surfaces of the POM with coarser and smaller size fractions were smoother and rougher, respectively, and the smaller POM size fractions had larger specific surface areas. The main functional groups in the different POM size fractions were -COOH, -OH, CO, CC, C-H, Si-O, and -CH₃. The POM fractions played a significant role in determining the distribution of heavy metals in the revegetated waste slag. These findings have important implications for aided phytostabilization, which significantly influences the fate and speciation of heavy metals at the phytoremediation site.

Inhalation bioaccessibility of Cd, Cu, Pb and Zn and speciation of Pb in particulate matter fractions from areas with different pollution characteristics in Henan Province, China

Windowsill particulate matter (PM) samples were collected from an area near large lead-smelting facilities in Jiyuan (JP), the urban area of Jiyuan (JU) and the peri-urban area of Mianchi (MC) in Henan, China to investigate the concentration and inhalation bioaccessibility of Cd, Cu, Pb and Zn. The <10 μm portions of the samples were extracted with simulated lung fluid to assess the in vitro inhalation bioaccessibility. Lower concentrations of heavy metals were found in the MC samples than in the JP and the JU samples. The average concentrations of Pb, Cd and Cu in the portions of the same size are in the order of JP samples > JU samples > MC samples. For Pb, Cd and Zn, the maximum inhalation bioaccessibility fraction values are all found in the MC samples, which ranged 3.87-8.79%, while those of the JP and the JU samples are <2%. The Pb speciation analysis with X-ray absorption spectrometry indicate mineral bound Pb, PbS and Pb₃(PO₄)₂ are the predominant Pb species in the JP samples; for the JU sample, organic bound Pb is the predominant Pb species in the 45-125 μm portion, while mineral bound Pb is the predominant Pb species in the 10-45 μm portion; for the MC samples, organic bound Pb is the predominant Pb species, followed by PbS. The results indicate that there is significant accumulation of Pb, Cd, Cu and Zn associated with PM in the area near the lead smelter and in the urban area of Jiyuan, especially Pb and Cd, however, the inhalation bioaccessibility of these metals in samples from the lead smelting impacted area is low, this may be due to the higher proportion of less soluble species of the metals in the samples from this area. However, organic matter bound Pb found in some samples has higher bioaccessibility than other Pb species.

Methodological factors influencing inhalation bioaccessibility of metal(loid)s in PM2.5 using simulated lung fluid

In this study, methodological factors influencing the dissolution of metal(loid)s in simulated lung fluid (SLF) was assessed in order to develop a standardised method for the assessment of inhalation bioaccessibility in PM_2.5. To achieve this aim, the effects of solid to liquid (S/L) ratio (1:100 to 1:5000), agitation (magnetic agitation, occasional shaking, orbital and end-over-end rotation), composition of SLF (artificial lysosomal fluid: ALF; phagolysosomal simulant fluid: PSF) and extraction time (1-120 h) on metal(loid) bioaccessibility were investigated using PM_2.5 from three Australian mining/smelting impacted soils and a certified reference material. The results highlighted that SLF composition significantly (p < 0.001) influenced metal(loid) bioaccessibility and that when a S/L ratio of 1:5000 and end-over-end rotation was used, metal(loid) solubility plateaued after approximately 24 h. Additionally, in order to assess the exposure of metal(loid)s via incidental ingestion of surface dust, PM_2.5 was subjected to simulated gastro-intestinal tract (GIT) solutions and the results were compared to extraction using SLF. Although As bioaccessibility in SLF (24 h) was significantly lower than in simulated GIT solutions (p < 0.05), Pb bioaccessibility was equal to or significantly higher than that extracted using simulated GIT solutions (p < 0.05).