Syntrophic association and performance of Clostridium, Desulfovibrio, Aeromonas and Tetrathiobacter as anodic biocatalysts for bioelectricity generation in dual chamber microbial fuel cell

Exploring the potential of graphite material in an unplanted electroactive wetland for the remediation of synthetic wastewater containing azo dye

The current study was conducted to understand the sole role of graphite as a substrate material in a dual-chambered baffled electroactive wetland (EW) in the treatment of Methyl red dye-containing wastewater. The results obtained were compared with conventional gravel-based unplanted dual-chambered constructed wetlands (CW) at a lab scale. The highest dye decolorisation and COD removal efficiency achieved was 92.88 ± 1.6% and 95.78 ± 4.1%, respectively, in the electro-active wetland. Dissolved oxygen (DO) and pH conditions were appropriately maintained in both the microcosms because of separated aerobic and anaerobic chambers. UV-vis and gas chromatography-mass spectroscopy analysis revealed the production of by-products like 4-amino benzoic and N- N dimethyl phenyl-diamine of MR in microcosms and revealed further mineralisation of by-products in the aerobic zone of electroactive-wetland. Higher root growth of Cicer aerietinum and Vigna radiata was observed in the presence of effluents of baffled electroactive wetlands compared to constructed wetland, indicating a decrease in phytotoxicity. Metagenomic analysis revealed the abundance of potential microbes for MR and organic matter removal from phylum Proteobacteria, Firmicutes, Bacteroidetes, and Euryarchaeota. A batch adsorption study revealed a higher adsorption capability of graphite material in comparison to gravel. Hence, this study demonstrated that graphite is an appropriate substrate in electroactive wetland in facilitating microbial attachments and enhancing dye degradation, in addition to exhibiting superior adsorption quality.

Hydrogen Production in Microbial Electrolysis Cells Using an Alginate Hydrogel Bioanode Encapsulated with a Filter Bag

The bacterial anode of microbial electrolysis cells (MECs) is the limiting factor in a high hydrogen evolution reaction (HER). This study focused on improving biofilm attachment to a carbon-cloth anode using an alginate hydrogel. In addition, the modified bioanode was encapsulated by a filter bag that served as a physical barrier, to overcome its low mechanical strength and alginate degradation by certain bacterial species in wastewater. The MEC based on an encapsulated alginate bioanode (alginate bioanode encapsulated by a filter bag) was compared with three controls: an MEC based on a bare bioanode (non-immobilized bioanode), an alginate bioanode, and an encapsulated bioanode (bioanode encapsulated by a filter bag). At the beginning of the operation, the Rct value for the encapsulated alginate bioanode was 240.2 Ω, which decreased over time and dropped to 9.8 Ω after three weeks of operation when the Geobacter medium was used as the carbon source. When the MECs were fed with wastewater, the encapsulated alginate bioanode led to the highest current density of 9.21 ± 0.16 A·m-2 (at 0.4 V), which was 20%, 95%, and 180% higher, compared to the alginate bioanode, bare bioanode, and encapsulated bioanode, respectively. In addition, the encapsulated alginate bioanode led to the highest reduction currents of (4.14 A·m-2) and HER of 0.39 m3·m-3·d-1. The relative bacterial distribution of Geobacter was 79%. The COD removal by all the bioanodes was between 62% and 88%. The findings of this study demonstrate that the MEC based on the encapsulated alginate bioanode exhibited notably higher bio-electroactivity compared to both bare, alginate bioanode, and an encapsulated bioanode. We hypothesize that this improvement in electron transfer rate is attributed to the preservation and the biofilm on the anode material using alginate hydrogel which was inserted into a filter bag.

Deciphering the core bacterial community structure and function and their response to environmental factors in activated sludge from pharmaceutical wastewater treatment plants

Pharmaceutical wastewater is recognized for its heightened concentrations of organic pollutants, and biological treatment stands out as an effective technology to remove these organic pollution. Therefore, a comprehensive exploration of core bacterial community compositions, functions, and their responses to environmental factors in pharmaceutical wastewater treatment plants (PWWTPs) is important for understanding the removal mechanism of these organic pollutants. This study comprehensively investigated 36 activated sludge (AS) samples from 15 PWWTPs in China. The results revealed that Proteobacteria (45.41%) was the dominant phylum in AS samples, followed by Bacteroidetes (19.54%) and Chloroflexi (4.13%). While the dominant genera were similar in both aerobic and anaerobic treatment processes, their relative abundances exhibited significant variations. Genera like HA73, Kosmotoga, and Desulfovibrio were more abundant during anaerobic treatment, while Rhodoplanes, Bdellovibrio, and Hyphomicrobium dominated during aerobic treatment. 13 and 10 core operational taxonomic units (OTUs) were identified in aerobic and anaerobic sludge, respectively. Further analysis revealed that core OTUs belonging to genera Kosmotoga, Desulfovibrio, Thauera, Hyphomicrobium, and Chelativorans, were associated with key functions, including sulfur metabolism, methane metabolism, amino acid metabolism, carbohydrate metabolism, toluene degradation, and nitrogen metabolism. Furthermore, this study highlighted the crucial roles of environmental factors, such as COD, NH4+-N, SO42-, and TP, in shaping both the structure and core functions of bacterial communities within AS of PWWTPs. Notably, these factors indirectly affect functional attributes by modulating the bacterial community composition and structure in pharmaceutical wastewater. These findings provide valuable insights for optimizing the efficiency of biochemical treatment processes in PWWTPs.

Dyeing wastewater treatment in horizontal-vertical constructed wetland using organic waste media

A hybrid constructed wetland (CW) system with horizontal and vertical flow combination was evaluated for treating carbon-deficient synthetic dyeing wastewater containing 100 mg/L Reactive Yellow 145 dye. Organic waste products such as cow manure and wood chips were added as media in horizontal CW, and gravel as vertical CW media. Horizontal and vertical CWs were planted with Typha angustifolia. Horizontal CW was operated in continuous mode at hydraulic retention time (HRT) of 3 d and vertical CW in batch mode at 1 d HRT. The results suggested the potential application of a cost-effective horizontal-vertical hybrid CW to remove azo dyes from low-carbon dyeing wastewater. In horizontal CW, organic media was used as the carbon source for microbial dye degradation, resulting in 90% colour removal in the absence of available carbon in dyeing wastewater. Proteobacteria, Firmicutes and Bacteroidetes played a dominant role in dye degradation in horizontal CW. Vertical CW removed dye degradation organics, 69% ammonium-nitrogen and 39% organic-nitrogen. Phytotoxicity assays indicated toxicity reduction along the CW treatment path.

Formation of biologically influenced palladium microstructures by Desulfovibrio desulfuricans and Desulfovibrio ferrophilus IS5

A range of Desulfovibrio spp. can reduce metal ions to form metallic nanoparticles that remain attached to their surfaces. The bioreduction of palladium (Pd) has been given considerable attention due to its extensive use in areas of catalysis and electronics and other technological domains. In this study we report, for the first time, evidence for Pd(II) reduction by the highly corrosive Desulfovibrio ferrophilus IS5 strain to form surface attached Pd nanoparticles, as well as rapid formation of Pd(0) coated microbial nanowires. These filaments reached up to 8 µm in length and led to the formation of a tightly bound group of interconnected cells with enhanced ability to attach to a low carbon steel surface. Moreover, when supplied with high concentrations of Pd (≥ 100 mmol Pd(II) g^-1 dry cells), both Desulfovibrio desulfuricans and D. ferrophilus IS5 formed bacteria/Pd hybrid porous microstructures comprising millions of cells. These three-dimensional structures reached up to 3 mm in diameter with a dose of 1200 mmol Pd(II) g^-1 dry cells. Under suitable hydrodynamic conditions during reduction, two-dimensional nanosheets of Pd metal were formed that were up to several cm in length. Lower dosing of Pd(II) for promoting rapid synthesis of metal coated nanowires and enhanced attachment of cells onto metal surfaces could improve the efficiency of various biotechnological applications such as microbial fuel cells. Formation of biologically stimulated Pd microstructures could lead to a novel way to produce metal scaffolds or nanosheets for a wide variety of applications.

Insight of the bio-cathode biofilm construction in microbial electrolysis cell dealing with sulfate-containing wastewater

Signaling molecules are useful in biofilm formation, but the mechanism for biofilm construction still needs to be explored. In this study, a signaling molecule, N-butyryl-l-Homoserine lactone (C₄-HSL), was supplied to enhance the construction of the sulfate-reducing bacteria (SRB) bio-cathode biofilm in microbial electrolysis cell (MEC). The sulfate reduction efficiency was more than 90% in less time under the system with C₄-HSL addition. The analysis of SRB bio-cathode biofilms indicated that the activity, distribution, microbial population, and secretion of extracellular polymers prompted by C₄-HSL, which accelerate the sulfate reduction, in particular for the assimilatory sulfate reduction pathway. Specifically, the relative abundance of acidogenic fermentation bacteria increased, and Desulfovibrio was co-metabolized with acidogenic fermentation bacteria. This knowledge will help to reveal the potential of signaling molecules to enhance the SRB bio-cathode biofilm MEC construction and improve the performance of treating sulfate-containing wastewater.

Copper removal and elemental sulfur recovery from fracturing flowback water in a microbial fuel cell with an extra electrochemical anode

Fracturing flowback water (FFW) from the shale gas exploitation resulted in environmental burden. FFW could be treated by a microbial fuel cell (MFC), but the challenge for the precipitation of ultrafine particles due to the supersaturation of sulfide remains to be addressed. Herein, we reported a Dual-anode MFC (DA-MFC), in which the FFW remediation and elemental sulfur recovery could be performed by regulating potential of the electrochemical anode. The removal of COD and sulfate was 70.0 ± 1.2% and 75.5 ± 0.4% in DA-MFCs by controlling potential at -0.1 V (vs. SHE) for 36 h. Meanwhile, the efficiency of copper removal and elemental sulfur recovery was up to 99.9 ± 0.5% and 75.6 ± 1.8%, respectively, which was attributed by the electrochemical oxidation of sulfide to elemental sulfur. Trichococcus, unclassified Prolixibacteraceae and unclassified Cloacimonadales enriched on the bioanodes of DA-MFCs were sensitive to potential regulation and favorable for degrading complex organics. UnclassifiedSynergistaceae, Desulfobacterium, Desulfovibrio, unclassified bacteria and Syner-01 was conducive to sulfate removal. Moreover, the elimination of Azoarcus due to potential regulation suppressed the biological oxidation of sulfide. Thus, organics were efficiently removed through the biological oxidation and sulfate reduction on bioanode, the copper ions were combined with the sulfide from sulfate reduction to precipitate effectively, and then the excessive sulfide in the system was converted into elemental sulfur attached on the electrochemical anode. The results provide new sights on bio-electrochemical technology for treatment of wastewater containing complex organics, heavy metals and sulfates.

Microbial Ecology of Sulfur Biogeochemical Cycling at a Mesothermal Hot Spring Atop Northern Himalayas, India

Sulfur related prokaryotes residing in hot spring present good opportunity for exploring the limitless possibilities of integral ecosystem processes. Metagenomic analysis further expands the phylogenetic breadth of these extraordinary sulfur (S) metabolizing microorganisms as well as their complex metabolic networks and syntrophic interactions in environmental biosystems. Through this study, we explored and expanded the microbial genetic repertoire with focus on S cycling genes through metagenomic analysis of S contaminated hot spring, located at the Northern Himalayas. The analysis revealed rich diversity of microbial consortia with established roles in S cycling such as Pseudomonas, Thioalkalivibrio, Desulfovibrio, and Desulfobulbaceae (Proteobacteria). The major gene families inferred to be abundant across microbial mat, sediment, and water were assigned to Proteobacteria as reflected from the reads per kilobase (RPKs) categorized into translation and ribosomal structure and biogenesis. An analysis of sequence similarity showed conserved pattern of both dsrAB genes (n = 178) retrieved from all metagenomes while other S disproportionation proteins were diverged due to different structural and chemical substrates. The diversity of S oxidizing bacteria (SOB) and sulfate reducing bacteria (SRB) with conserved (r)dsrAB suggests for it to be an important adaptation for microbial fitness at this site. Here, (i) the oxidative and reductive dsr evolutionary time-scale phylogeny proved that the earliest (but not the first) dsrAB proteins belong to anaerobic Thiobacillus with other (rdsr) oxidizers, also we confirm that (ii) SRBs belongs to δ-Proteobacteria occurring independent lateral gene transfer (LGT) of dsr genes to different and few novel lineages. Further, the structural prediction of unassigned DsrAB proteins confirmed their relatedness with species of Desulfovibrio (TM score = 0.86, 0.98, 0.96) and Archaeoglobus fulgidus (TM score = 0.97, 0.98). We proposed that the genetic repertoire might provide the basis of studying time-scale evolution and horizontal gene transfer of these genes in biogeochemical S cycling.

Greenhouse Gases Trade-Off from Ponds: An Overview of Emission Process and Their Driving Factors

Inland water bodies (particularly ponds) emit a significant amount of greenhouse gases (GHGs), particularly methane (CH4), carbon dioxide (CO2), and a comparatively low amount of nitrous oxide (N2O) to the atmosphere. In recent decades, ponds (<10,000 m2) probably account for about 1/3rd of the global lake perimeter and are considered a hotspot of GHG emissions. High nutrients and waterlogged conditions provide an ideal environment for CH4 production and emission. The rate of emissions differs according to climatic regions and is influenced by several biotic and abiotic factors, such as temperature, nutrients (C, N, & P), pH, dissolved oxygen, sediments, water depth, etc. Moreover, micro and macro planktons play a significant role in CO2 and CH4 emissions from ponds systems. Generally, in freshwater bodies, the produced N2O diffuses in the water and is converted into N2 gas through different biological processes. There are several other factors and mechanisms which significantly affect the CH4 and CO2 emission rate from ponds and need a comprehensive evaluation. This study aims to develop a decisive understanding of GHG emissions mechanisms, processes, and methods of measurement from ponds. Key factors affecting the emissions rate will also be discussed. This review will be highly useful for the environmentalists, policymakers, and water resources planners and managers to take suitable mitigation measures in advance so that the climatic impact could be reduced in the future.

Advances and prospects on the aquatic plant coupled with sediment microbial fuel cell system

Energy resource scarcity and sediment pollution perniciousness have become enormous challenges, to which research has been focused on energy recovery and recycle technologies to solve both above problems. The organic matter stored in anoxic sediments of freshwater ecosystem represents a tremendous potential energy source. The system of aquatic plant coupled with sediment microbial fuel cell (AP-SMFC) has attracted much attention as a more feasible, economical and eco-friendly way to remediate sediment and surface water and generate electricity. However, the research on AP-SMFC has only been carried out in the last decade, and relevant studies have not been well summarized. In this review, the advances and prospects on AP-SMFC were systematically introduced. Firstly, the annual publication counts and keywords co-occurrence cluster of AP-SMFC were identified and visualized by resorting to the CiteSpace software, and the result showed that the research on AP-SMFC increased significantly in the last decade on the whole and will continue to increase. The bibliometric results provided valuable references and information on potential research directions for future studies. And then, the research progress and reaction mechanism of AP-SMFC were systematically described. Thirdly, the performance of AP-SMFC, including nutrients removal, organic contaminants removal, and electricity generation, was systematically summarized. AP-SMFC can enhance the removal of pollutants and electricity generation compared with SMFC without AP, and is considered to be an ideal technology for pollutants removal and resource recovery. Finally, the current challenges and future perspectives were summarized and prospected. Therefore, the review could serve as a guide for the new entrants to the field and further development of AP-SMFC application.

Influence of applied potential on treatment performance and clogging behaviour of hybrid constructed wetland-microbial electrochemical technologies

A two-stage hybrid Constructed Wetland (CW) integrated with a microbial fuel cell (MFC), and microbial electrolysis cell (MEC) has been assessed for treatment performance and clogging assessment and further compared with CW. The CW-MEC was operated with applied potential to the working electrode and compared with the performance of naturally adapted redox potential of the CW-MFC system. A complex synthetic municipal wastewater was used during the study, which was composed of trace metals, organics, inorganics, and dye. The study demonstrated that providing a constant potential to the working electrode in CW-MEC has resulted in high treatment performance and reduced sludge generation. The maximum chemical oxygen demand (COD), ammonium (NH₄⁺), and phosphate (PO₄^3-) removal achieved during treatment by CW-MEC at 24 h hydraulic retention time was 89 ± 6%, 72 ± 6% and 93 ± 2%, respectively. ICP-MS results indicated that trace metal removals were also higher in CW-MEC than in CW alone (p < 0.05). At the end of the experiment, significant volumetric change (total volume of the microcosm) occurred in CW (1.3 L), which indicates high sludge generation, whereas it was lesser in CW-MEC (0.3 L) and in CW-MFC (0.5 L). Further, Energy Dispersive X-ray (EDX) spectroscopy results indicated low levels of metal precipitation in the CW-MEC system. Based on the Shannon diversity index, the CW-MEC was assessed to be characterised by high species richness and diversity. The observations from this study indicate that the applied potential at the working electrode has a significant impact on treatment performance and clogging behaviour of the system.

Interrelation between sulphur and conductive materials and its impact on ammonium and organic pollutants removal in electroactive wetlands

This investigation is the first of its kind to evaluate the interrelation of sulphate (SO₄^2-) with conductive materials as well as their individual and synergetic effects on the removal of ammonium and organic pollutants in electroactive wetlands, also known as constructed wetland (CW) - microbial fuel cell (MFC). The role of MFC components in CW was investigated to treat the sulphate containing wastewater under a long-term operation without any toxicity build-up in the system. A comparative study was also performed between CW-MFC and CW, where sulphate containing wastewater (S-replete) and without sulphate wastewater (S-deplete) was assessed. The S-replete showed high NH₄⁺ removal than the S-deplete, and the requesnce of removal was: CW-MFC-replete>CW-MFC-deplete>CW-replete>CW-deplete. The chemical oxygen demand (COD) removal was high in the case of CW-MFC-replete, and the sequence of removal was CW-MFC-replete>CW-MFC-deplete>CW-deplete>CW-replete. X-ray photon spectroscopic study indicates 0.84% sulphur accumulation in CW-MFC-replete and 2.49% in CW-replete, indicating high sulphur precipitation in CW without the MFC component. The high relative abundance of class Deltaproteobacteria (7.3%) in CW-MFC-replete along with increased microbial diversity (Shannon index=3.5) rationalise the symbiosis of sulphate reducing/oxidising microbes and its impact on the treatment performance and electrochemical activity.

How Comparable are Microbial Electrochemical Systems around the Globe? An Electrochemical and Microbiological Cross-Laboratory Study

A cross-laboratory study on microbial fuel cells (MFC) which involved different institutions around the world is presented. The study aims to assess the development of autochthone microbial pools enriched from domestic wastewater, cultivated in identical single-chamber MFCs, operated in the same way, thereby approaching the idea of developing common standards for MFCs. The MFCs are inoculated with domestic wastewater in different geographic locations. The acclimation stage and, consequently, the startup time are longer or shorter depending on the inoculum, but all MFCs reach similar maximum power outputs (55±22 μW cm-2 ) and COD removal efficiencies (87±9 %), despite the diversity of the bacterial communities. It is inferred that the MFC performance starts when the syntrophic interaction of fermentative and electrogenic bacteria stabilizes under anaerobic conditions at the anode. The generated power is mostly limited by electrolytic conductivity, electrode overpotentials, and an unbalanced external resistance. The enriched microbial consortia, although composed of different bacterial groups, share similar functions both on the anode and the cathode of the different MFCs, resulting in similar electrochemical output.

Generation of electrical energy in a microbial fuel cell coupling acetate oxidation to Fe3+ reduction and isolation of the involved bacteria

An iron reducing enrichment was obtained from sulfate reducing sludge and was evaluated on the capability of reducing Fe³⁺ coupled to acetate oxidation in a microbial fuel cell (MFC). Three molar ratios for acetate/Fe³⁺ were evaluated (2/16, 3.4/27 and 6.9/55 mM). The percentages of Fe³⁺ reduction were in a range of 80-90, 60-70 and 40-50% for the MFCs at closed circuit for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Acetate consumption was in a range of 80-90% in all cases. The results obtained at closed circuit for current density were: 11.37 mA/m², 4.5 mA/m² and 7.37 mA/m² for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Some microorganisms that were isolated and identified in the MFCs were Azospira oryzae, Cupriavidus metallidurans CH34, Enterobacter bugandensis 247BMC, Citrobacter freundii ATCC8090 and Citrobacter murliniae CDC2970-59, these bacteria have been reported as exoelectrogens in MFC and in MFC involving metals removal but not all of them have been reported to utilize acetate as preferred substrate. The results demonstrate that the isolates can utilize acetate as the sole source of carbon and suggest that Fe³⁺ reduction was carried out by a combination of different mechanisms (direct contact and redox mediators) utilized by the bacteria identified in the MFC. Storage of the energy generated from the 2/16 mM MFC system arranged in a series of three demonstrated that it is possible to utilize the energy to charge a battery.

The anodic potential shaped a cryptic sulfur cycling with forming thiosulfate in a microbial fuel cell treating hydraulic fracturing flowback water

The flowback water (FW) from shale gas exploitation can be effectively treated by bioelectrochemical technology, but sulfide overproduction remains to be addressed. Herein, sulfate-reducing bacteria (SRB) meditated microbial fuel cells (MFCs) with anodic potential control were used. COD removal gradually increased to 67.4 ± 5.1% in electrode-potential-control (EPC) MFCs and 78.9 ± 2.4% in the MFC with open circuit (OC-MFC). However, in EPC MFCs sulfate removal stabilized at much lower levels (no more than 19.9 ± 1.9%) along with much lower sulfide concentrations, but in OC-MFC it increased and finally stabilized at 59.9 ± 0.1%. Partial sulfur reuse in EPC MFCs was indicated by the current production. Notably, thiosulfate was specially detected under low potentials and effectively oxidized in EPC MFCs, especially under -0.1 V vs. SHE, which probably related to the sulfur reuse. Metagenomics analysis showed that the anode with -0.1 and -0.2 V likely shunted electrons from cytochromes that used for reducing DsrC-S⁰ trisulfide and thus contributed to producing thiosulfate and decreasing sulfide production. Meanwhile, the anode with -0.1 V specially accumulated sulfur-oxidizing system (Sox) genes regarding thiosulfate and sulfite oxidation to sulfate, which concurred to the effective thiosulfate oxidation and also indicated the possible direct sulfite oxidation to sulfate during the sulfur cycling. But the anode of -0.2 V highly accumulated genes for thiosulfate and sulfite reduction. Both anodes also distinctly accumulated genes regarding thiosulfate oxidation to tetrathionate and sulfide oxidation to sulfur or polysulfide. Further, sulfur-oxidizing bacteria were specially enriched in EPC MFCs and likely contributed to thiosulfate and sulfite oxidation. Thus, we suggested that the higher electrode potential (e.g. -0.1 V) can shape a cryptic sulfur cycling, in which sulfate was first reduced to sulfite, and then reoxidized to sulfate by forming thiosulfate as an important intermediate or by direct sulfite oxidation. The results provide new sights on the bioelectrochemical treatment of wastewater containing complex organics and sulfate.

Performance evaluation of microbial fuel cell for landfill leachate treatment: Research updates and synergistic effects of hybrid systems

Over half of century, sanitary landfill was and is still the most economical treatment strategy for solid waste disposal, but the environmental risks associated with the leachate have brought attention of scientists for its proper treatment to avoid surface and ground water deterioration. Most of the treatment technologies are energy-negative and cost intensive processes, which are unable to meet current environmental regulations. There are continuous demands of alternatives concomitant with positive energy and high effluent quality. Microbial fuel cells (MFCs) were launched in the last two decades as a potential treatment technology with bioelectricity generation accompanied with simultaneous carbon and nutrient removal. This study reviews capability and mechanisms of carbon, nitrogen and phosphorous removal from landfill leachate through MFC technology, as well as summarizes and discusses the recent advances of standalone and hybrid MFCs performances in landfill leachate (LFL) treatment. Recent improvements and synergetic effect of hybrid MFC technology upon the increasing of power densities, organic and nutrient removal, and future challenges were discussed in details.

Producing electrical energy in microbial fuel cells based on sulphate reduction: a review

Combination of the treatment of effluents with high organic loads and the production of electricity is the driving forces stimulating the development of microbial fuel cells (MFC). The increase in electricity production in MFCs requires not only the optimization of the operational parameters but also the inhibition of the metabolic pathways, which compete with electricity production, such as methanogenesis. The presence of both sulphate and sulphide ions in conventional anaerobic reactors hampers the growth of methanogenic archaea and justifies the use of sulphate and therefore sulphate-reducing bacteria (SRB) in the anodic half-cell of MFC. Most importantly, the literature on the subject reveals that SRB are able to directly transfer electrons to solid electrodes, enabling the production of electrical energy. This technology is versatile because it associates the removal of both sulphate and the chemical oxygen demand (COD) with the production of electricity. Therefore, the current work revises the main aspects related to the inoculation of MFC with SRB focusing on (i) the microbial interactions in the anodic chamber, (ii) the electron transfer pathways to the solid anode, and also (iii) the sulphate and COD removal yields along with the electricity production efficiencies.

Microbial Structure and Energy Generation in Microbial Fuel Cells Powered with Waste Anaerobic Digestate

Development of economical and environment-friendly Microbial Fuel Cells (MFCs) technology should be associated with waste management. However, current knowledge regarding microbiological bases of electricity production from complex waste substrates is insufficient. In the following study, microbial composition and electricity generation were investigated in MFCs powered with waste volatile fatty acids (VFAs) from anaerobic digestion of primary sludge. Two anode sizes were tested, resulting in organic loading rates (OLRs) of 69.12 and 36.21 mg chemical oxygen demand (COD)/(g MLSS∙d) in MFC1 and MFC2, respectively. Time of MFC operation affected the microbial structure and the use of waste VFAs promoted microbial diversity. High abundance of Deftia sp. and Methanobacterium sp. characterized start-up period in MFCs. During stable operation, higher OLR in MFC1 favored growth of exoelectrogens from Rhodopseudomonas sp. (13.2%) resulting in a higher and more stable electricity production in comparison with MFC2. At a lower OLR in MFC2, the percentage of exoelectrogens in biomass decreased, while the abundance of genera Leucobacter, Frigoribacterium and Phenylobacterium increased. In turn, this efficiently decomposed complex organic substances, favoring high and stable COD removal (over 85%). Independent of the anode size, Clostridium sp. and exoelectrogens belonging to genera Desulfobulbus and Acinetobacter were abundant in MFCs powered with waste VFAs.

Self-induced bioelectro-potential influence on sulfate removal and desalination in microbial fuel cell

This study focused on treatment of sulfate-rich produced water (PW) using microbial fuel cell (MFC) with biotic anode (bAC) and abiotic cathode (aCC) separated by a cation exchange membrane (CEM). MFC was operated under varied circuitry modes - open circuit (OC-without resistance) and closed circuit (CC-applied resistance (1kΩ)) to evaluate and assess the removal of sulfates and salts with simultaneous carbon utilization. The OC and CC operations depicted sulfates removal efficiency of 38% and 56%, salinity removal of 12% and 21% and COD removal of 47% and 58%, respectively. Both OC and CC showed K⁺ decrement in bAC and increment in aCC with a comparatively higher efficiency of ionic mobility in CC operation. Maximum open circuit voltage (OCV) of 498 mV (OC) was observed with redox catalytic peak currents from cyclic voltammetry [Anode/cathode, 3.5/-4.9 mA (OC); 6.9/-7.9 mA (CC)]. Dominance of Proteobacteria and Actinobacteria with specific enrichment of sulfate reducing bacteria (SRB) and halophiles was observed in bAC at the end of operation.

Upgrading of microalgal consortia with CO2 from fermentation of wheat straw for the phycoremediation of domestic wastewater

Algae have been considered as a best feedstock for combating CO2. In the present study, two mixed microalgal cultures i.e. MAC1 and MAC2 were evaluated in batch mode with an extraneous supply of CO2 from the fermentation of wheat straw. Both the mixed cultures displayed promising CO2 sequestration potentials of 287 and 263 mg L-1d-1, respectively. The removal efficiencies in terms of ammonium, phosphate, chemical oxygen demand, and nitrate were found to be 87%, 78%, 68% and 65%, respectively. Enriching the tolerance of the microalgal consortia to CO2 supply and wastewater as the nutrient source significantly enhanced the lipid production for both the microalgae consortia. Lipid contents of MAC1 and MAC2 were observed to be 12.29 & 11.37%, respectively while the biomass yield from both the consortia was 0.36 g L-1. Total chlorophyll and protein contents of MAC1 and MAC2 were 14.27 & 12.28 µgmL-1 and 0.13 & 0.15 mgmL-1, respectively. Both the consortia found to have significant potential for CO2 sequestration, wastewater remediation and biofuel production.

Alkalinity and salinity favor bioelectricity generation potential of Clostridium, Tetrathiobacter and Desulfovibrio consortium in Microbial Fuel Cells (MFC) treating sulfate-laden wastewater

Clostridium, Tetrathiobacter and Desulfovibrio species are identified as suitable biocatalysts for treating organic-rich and sulfate-laden wastewater. Results from this study show that the power generation was much higher under alkaline conditions, i.e., pH of 8 when compared to neutral and acidic conditions. The effect of salinity was studied by varying the sodium chloride concentration at (1.5, 3, 4.5, 6, and 7.5 g/L NaCl) in anolyte. The highest power density of 1188 mW/m3 was produced at a sodium chloride concentration of 6 g/L in the anolyte. Results from cyclic voltammetry and linear scan voltammetry analysis suggested the direct electron transfer mechanism favored by cytb and cytc, Redox peaks observed for the biogenic synthesis of sulfite and sulfide support the complete one-step mineralization of sulfate. Bioelectrochemical behavior of the selectively enriched microbial consortium confirms its use for the treatment of wastewaters high in salinity and sulfate concentrations.

Enhanced biogas production from municipal solid waste via co-digestion with sewage sludge and metabolic pathway analysis

The present study intends to evaluate the potential of co-digestion for utilizing Organic fraction of Municipal Solid Waste (OFMSW) and sewage sludge (SS) for enhanced biogas production. Metagenomic analysis was performed to identify the dominant bacteria, archaea and fungi, changes in their communities with time and their functional roles during the course of anaerobic digestion (AD). The cumulative biogas yield of 586.2 mL biogas/gVS with the highest methane concentration of 69.5% was observed under an optimum ratio of OFMSW:SS (40:60 w/w). Bacteria and fungi were found to be majorly involved in hydrolysis and initial stages of AD. Probably, the most common archaea Methanosarsina sp. primarily followed the acetoclastic pathway. The hydrogenotrophic pathway was less followed as indicated by the reduction in abundance of syntrophic acetate oxidizers. An adequate understanding of microbial communities is important to manipulate and inoculate the specific microbial consortia to maximize CH₄ production through AD.

Effect of external resistance on substrate removal and electricity generation in microbial fuel cell treating sulfide and nitrate simultaneously

The effect of external resistance on substrate removal and electricity generation was explored in microbial fuel cells (MFCs) simultaneously treating sulfide and nitrate. The MFCs were operated under three different conditions keeping open-circuit MFC as control. In batch mode, all the MFCs showed good capacity of simultaneously removing sulfide and nitrate regardless of external resistance. The voltage profile could be divided into rapid descent zone, bulge zone, and stability zone, which represents typical polarization behavior. Taking open circuit as control, low external resistance promoted the production of sulfate and nitrogen gas, while a strong link between product production and external resistance was evident based on Pearson correlation analyses. In addition, low external resistance improved the amount of transferred electrons, while the peak electronic quantity was noticed when the external resistance was equivalent to internal resistance. Moreover, the mechanism of substrate removal and electricity generation was hypothesized for the MFCs simultaneously treating sulfide and nitrate which explained the results well.

A comprehensive review on enzymatic degradation of the organophosphate pesticide malathion in the environment

A comprehensive review of available bioremediation technologies for the pesticide malathion is presented. This review article describes the usage and consequences of malathion in the environment, along with a critical discussion on modes of metabolism of malathion as a sole source of carbon, phosphorus, and sulfur for bacteria, and fungi along with the biochemical and molecular aspects involved in its biodegradation. Additionally, the recent approaches of genetic engineering are discussed for the manipulation of important enzymes and microorganisms for enhanced malathion degradation along with the challenges that lie ahead.

Less biomass and intracellular glutamate in anodic biofilms lead to efficient electricity generation by microbial fuel cells

BACKGROUND

Using a microbial fuel cell (MFC), we observed that a complex microbial community decomposed starch and transferred electrons to a graphite felt anode to generate current. In spite of the same reactor configuration, inoculum, substrate, temperature, and pH, MFCs produced different current and power density. To understand which factor(s) affected electricity generation, here, we analyzed a complex microbial community in an anodic biofilm and fermentation broth using Illumina MiSeq sequencing and metabolomics.

RESULTS

Microbial biomass on the anode was lower in MFCs generating more electricity (0.09-0.16 mg cm^-2-anode) than in those generating less electricity (0.60-2.80 mg cm^-2-anode), while being equal (3890-4196 mg L^-1-broth) in the fermentation broth over the same operational period. Chemical oxygen demand removal and acetate concentration were also similar in fermentation broths. MFCs generating more electricity had relatively more exoelectrogenic bacteria, such as Geobacter sp., but fewer acetate-utilizing Methanosarcina sp. and/or Lactococcus sp. in anodic biofilms. Accordingly, anodic biofilms generating more electricity presented higher levels of most intracellular metabolites related to the tricarboxylic acid cycle and a higher intracellular ATP/ADP ratio, but a lower intracellular NADH/NAD⁺ ratio. Moreover, the level of intracellular glutamate, an essential metabolite for microbial anabolic reactions, correlated negatively with current density.

CONCLUSION

Microbial growth on the anode and intracellular glutamate levels negatively affect electricity generation by MFCs. Reduced formation of anodic biofilm, in which intracellular glutamate concentration is 33.9 μmol g-cell^-1 or less, favors the growth of acetate-utilizing Geobacter sp. on the anode and improves current generation.

Simultaneous removal of organic matter and iron from hydraulic fracturing flowback water through sulfur cycling in a microbial fuel cell

The high volume of flowback water (FW) generated during shale gas exploitation is highly saline, and contains complex organics, iron, heavy metals, and sulfate, thereby posing a significant challenge for the environmental management of the unconventional natural gas industry. Herein, the treatment of FW in a sulfur-cycle-mediated microbial fuel cell (MFC) is reported. Simultaneous removal efficiency for chemical oxygen demand (COD) and total iron from a synthetic FW was achieved, at 72 ± 7% and 90.6 ± 8.7%, respectively, with power generation of 2667 ± 529 mW/m³ in a closed-circuit MFC (CC-MFC). However, much lower iron removal (38.5 ± 4.5%) occurred in the open-circuit MFC (OC-MFC), where the generated FeS fine did not precipitate because of sulfide supersaturation. Enrichment of both sulfur-oxidizing bacteria (SOB), namely Helicobacteraceae in the anolyte and the electricity-producing bacteria, namely Desulfuromonadales on the anode likely accelerated the sulfur cycle through the biological and bioelectrochemical oxidation of sulfide in the anodic chamber, and effectively increased the molar ratio of total iron to sulfide, thus alleviating sulfide supersaturation in the closed circuitry. Enrichment of SOB in the anolyte might be attributed to the formation of FeS electricity wire and likely contributed to the stable high power generation. Bacteroidetes, Firmicutes, Proteobacteria, and Chloroflexi enriched in the anodic chamber were responsible for degrading complex organics in the FW. The treatment of real FW in the sulfur-cycle-mediated MFC also achieved high efficiency. This research provides a promising approach for the treatment of wastewater containing organic matters, heavy metals, and sulfate by using a sulfur-cycle-mediated MFC.

Effects of wastewater constituents and operational conditions on the composition and dynamics of anodic microbial communities in bioelectrochemical systems

Over the last decade, there has been an ever-growing interest in bioelectrochemical systems (BES) as a sustainable technology enabling simultaneous wastewater treatment and biological production of, e.g. electricity, hydrogen, and further commodities. A key component of any BES degrading organic matter is the anode where electric current is biologically generated from the oxidation of organic compounds. The performance of BES depends on the interactions of the anodic microbial communities. To optimize the operational parameters and process design of BES a better comprehension of the microbial community dynamics and interactions at the anode is required. This paper reviews the abundance of different microorganisms in anodic biofilms and discusses their roles and possible side reactions with respect to their implications on the performance of BES utilizing wastewaters. The most important operational parameters affecting anodic microbial communities grown with wastewaters are highlighted and guidelines for controlling the composition of microbial communities are given.