Inactivation of E. coli and Streptococcus agalactiae by UV/persulfate during marine aquaculture disinfection

Catalyst-free persulfate activation by UV/visible radiation for secondary urban wastewater disinfection

This study focuses on the treatment of secondary urban wastewater (W) to improve the effluent quality aiming at the reduction of pathogenic microorganisms for the safe reuse of the treated wastewater (TW). Catalyst-free persulfate activation by radiation-based oxidation was applied as a treatment technology. A parametric study was carried out to select the best operating conditions. Total enterobacteria inactivation (quantified by the log reduction (CFU/100 mL)) was achieved when using [S2O82-] = 1 mM, pH = 8.5 (natural pH of W), T = 25 °C, and I = 500 W/m2. However, storing TW for 3 days promoted the regrowth of bacteria, risking its reutilization. Therefore, in this study, and for the first time, the potential beneficial role of inoculation of wastewater treated by the radiation-activated persulfate process with a diverse bacterial community was evaluated in order to control the regrowth of potentially harmful microorganisms through bacterial competition. For this, TW was diluted with river water (R) in the volume percentages of 5, 25, and 50 (percentages refer to R content), and enterobacteria and total heterotrophs were enumerated before and after storage for 72 h. The results showed total heterotrophs and enterobacteria regrowth for TW and R + TW diluted 5 and 25% after storage. However, for R + TW diluted 50%, only the total heterotrophs regrew. Hence, the treated wastewater generated by the oxidative process diluted with 50% river water complies with the legislated limits for reuse in urban uses or irrigation.

Inactivation of Heterosigma akashiwo under UV/peroxydisulfate advanced disinfection system in marine waters

Heterosigma akashiwo (H. akashiwo) is recognized as a harmful algal bloom (HABs) species with a global distribution, capable of posing significant threats to marine ecosystems, particularly when spread through ship ballast water. This investigation focused on elucidating the inactivation kinetics and underlying mechanism of H. akashiwo through a combined ultraviolet irradiation and peroxydisulfate (UV/PDS) process. The results demonstrated a strong synergistic effect within the UV/PDS system, resulting in an inactivation of 0.78-ln and 2.67-ln within 40 min of UV and UV/PDS processes. The principal agents accountable for inactivation were identified as sulfate radicals (•SO4-) and hydroxyl radical (•OH), which exhibited a synergistic effect in the UV/PDS process. Furthermore, the study observed a negatively impact of seawater pH and salinity on the efficiency of inactivation. UV/PDS caused oxidative stress on algal cells, initially involving the participation of antioxidant enzymes in counteracting cellular damage, but this protective mechanism diminished as the reaction duration extended. The UV/PDS treatment not only inflicted damage upon H. akashiwo's photosynthetic system but also caused the extracellular release of DNA and algal organic matter (AOM) due to damaged cell membranes. Transcriptome analysis provided a molecular biology perspective on the cellular inactivation process. Upregulation of genes linked to photosynthesis and oxidative phosphorylation suggested a potential elevation in energy metabolism. In contrast, genes associated with cellular and metabolic processes, including glycolysis and the tricarboxylic acid cycle (TCA cycle), exhibited downregulation. Moreover, this treatment exerted an inhibitory influence on RNA polymerase and protein synthesis, resulting in the reduced expression of genetic information.

Ultraviolet-based synergistic processes for wastewater disinfection: A review

Ultraviolet (UV) irradiation is widely used for wastewater disinfection but suffers from low inactivation rates and can cause photoreactivation of microorganisms. Synergistic disinfection with UV and oxidants is promising for enhancing the inactivation performance. This review summarizes the inactivation effects on representative microorganisms by UV/hydrogen peroxide (H₂O₂), UV/ozone (O₃), UV/persulfate (PS), UV/chlorine, and UV/chlorine dioxide (ClO₂). UV synergistic processes perform better than UV or an oxidant alone. UV mainly attacks the DNA or RNA in microorganisms; the oxidants H₂O₂ and O₃ mainly attack the cell walls, cell membranes, and other external structures; and HOCl and ClO₂ enter cells and oxidize proteins and enzymes. Free radicals can have strong oxidation effects on cell walls, cell membranes, proteins, enzymes, and even DNA. At similar UV doses, the inactivation rates of Escherichia coli with UV alone, UV/H₂O₂, UV/O₃, UV/PS (peroxydisulfate or peroxymonosulfate), and UV/chlorinated oxidant (chlorine, ClO₂, and NH₂Cl) range from 2.03 to 3.84 log, 2.62-4.30 log, 4.02-6.08 log, 2.93-5.07 log, and 3.78-6.55 log, respectively. The E. coli inactivation rates are in the order of UV/O₃ ≈ UV/Cl₂ > UV/PS > UV/H₂O₂. This order is closely related to the redox potentials of the oxidants and quantum yields of the radicals. UV synergistic disinfection processes inhibit photoreactivation of E. coli in the order of UV/O₃ > UV/PS > UV/H₂O₂. The activation mechanisms and formation pathways of free radicals with different UV-based synergistic processes are presented. In addition to generating HO·, O₃ can reduce the turbidity and chroma of wastewater to increase UV penetration, which improves the disinfection performance of UV/O₃. This knowledge will be useful for further development of the UV-based synergistic disinfection processes.

Evaluation of the disinfection effect and mechanism of SO4•- and HO• UV/persulfate salts

Although ultraviolet (UV) and persulfate (PS) have been widely used in water disinfection process, their incompleteness of disinfection, such as inducing the production of viable but non-culturable cells (VBNC), has attracted extensive attention. In this study, the disinfection effect of combined UV and PS was evaluated, and the roles of SO₄^•- and HO^• radicals in UV/PS disinfection were also analyzed. UV/PS more effectively inactivated cells and reduced the number of culturable cells. Also, the test of bacterial dark activation suggested that UV/PS disinfection inhibited the recovery of VBNC bacteria. The mechanisms of UV/PS disinfection were the increase of membrane permeability and oxidative stress, where SO₄^•- radicals played more role than HO^• radicals. Furthermore, UV/PS disinfection more significantly perturbed the metabolism of Pseudomonas aeruginosa (p < 0.05), mainly involving glyoxylate and dicarboxylic acid metabolism, aminoacyl-tRNA biosynthesis, Alanine, aspartate and glutamate metabolism, and citric acid cycle (TCA cycle). In short, UV/PS disinfection can not only significantly reduce the number of culturable bacteria (kill bacteria) but also inhibits the recovery of VBNC bacteria.

Inactivation of the waterborne marine pathogen Vibrio alginolyticus by photo-chemical processes driven by UV-A, UV-B, or UV-C LED combined with H2O2 or HSO5. WATER RESEARCH 2023;232:119686. [PMID: 36764105 DOI: 10.1016/j.watres.2023.119686]

Ultraviolet (UV) radiation is a well-implemented process for water disinfection. The development of emergent UV sources, such as light-emitting diodes (LEDs), has afforded new possibilities for advanced oxidation processes. The emission wavelength is considered to be an important factor for photo-chemical processes in terms of both biological damage and energetic efficiency, as the inactivation mechanisms and mode-of-action may differ according to the wavelength that is applied. In addition, these processes merit exploration for inactivating emerging pathogens, such as marine vibrios, that are important bacteria to control in maritime activities. The main goal of this study was to compare the disinfection efficacy of several UV-LED driven processes with different modes of action. First, the effect of UV-LEDs was assessed at different UV ranges (UV-A, UV-B, or UV-C). Second, the possible enhancement of a combination with hydrogen peroxide (H₂O₂) or peroxymonosulfate salt (HSO₅^-) was investigated under two different application strategies, i.e. simultaneous or sequential. The results obtained indicate a high sensitivity of Vibrio alginolyticus to UV radiation, especially under UV-B (k_obs = 0.24 cm²/mJ) and UV-C (k_obs = 1.47 cm²/mJ) irradiation. The highest inactivation rate constants were obtained for UV/HSO₅^- (k_obs (cm²/mJ)=0.0007 (UV-A); 0.39 (UV-B); 1.79 (UV-C)) with respect to UV/H₂O₂ (k_obs (cm²/mJ)=0.0006 (UV-A); 0.26 (UV-B); and 1.54 (UV-C)) processes, however, regrowth was avoided only with UV/H₂O₂. Additionally, the disinfection enhancement caused by a chemical addition was more evident in the order UV-A > UV-B > UV-C. By applying H₂O₂ (10 mg/L) or HSO₅^- (2.5 mg/L) in a sequential mode before the UV, negligible effects were obtained in comparison with the simultaneous application. Finally, promising electrical energy per order (EE_O) values were obtained as follows: UV/HSO₅^- (EE_O (kWh/m³)=1.68 (UV-A); 0.20 (UV-B); 0.04 (UV-C)) and UV/H₂O₂ (EE_O (kWh/m³)=2.15 (UV-A); 0.32 (UV-B); 0.04 (UV-C)), demonstrating the potential of UV-LEDs for disinfection in particular activities such as the aquaculture industry or maritime transport.

Escherichia coli inactivation in water by sulfate radical-based oxidation process using FeCl3-activated biochar/persulfate system

Pathogenic microbes in water present great risks to environments, water resources, and human health. In the present study, for the first time, a FeCl₃-activated bermudagrass-derived biochar (FA-BC) was applied to activate persulfate (PS) for E. coli inactivation. The PS activation was ascribed to the presence of Fe⁰ and Fe₃O₄ on the surface of FA-BC, and SO₄^·- radicals were proved to be the main role for E. coli inactivation using FA-BC activated PS system (FA-BC/PS). Decreasing the pH (5-9) and increasing the PS concentration (50-300 mg/L), reaction temperature (20-50 °C), and FA-BC dosage (100-500 mg/L) resulted in the enhancement of disinfection efficiency of E. coli using FA-BC/PS. 6.21 log reductions of E. coli were achieved within 20 min under the optimal conditions (500 mg/L FA-BC, 200 mg/L PS, pH 7, and 20 °C with 10⁷ CFU/mL E. coli in DI water). The FA-BC/PS effectively eliminated various initial concentrations of E. coli (10⁵-10⁸ CFU/mL). The E. coli inactivation rate decreased from 0.1426 min^-1 to 0.0883, 0.1268 min^-1, and 0.1093 min^-1 with the presence of 10 mg/L humic acid, 100 mg/L Cl^-, and 100 mg/L HCO₃^-, respectively. In addition, after three cycles of disinfection tests using FA-BC/PS, the E. coli inactivation rate only slightly decreased from 0.1426 to 0.1288 min^-1. The FA-BC/PS also effectively removed the E. coli in real stormwater with a 99.2 % inactivation efficiency within 180 min. The FA-BC/PS in fixed-bed column tests revealed the continuous and high inactivation of E. coli in water. Increasing the FA-BC amount (1.5 %-5 %) and PS concentration (50-200 mg/L) and decreasing the flow rate (2-4 mL/min) caused the lower E. coli concentration in effluent. Therefore, the FA-BC/PS can be considered as a promising and efficient technique for water disinfection.