User-friendly graphical user interface software for ideal adsorbed solution theory calculations

Molecular recognition with resolution below 0.2 angstroms through thermoregulatory oscillations in covalent organic frameworks

Crystalline materials with uniform molecular-sized pores are desirable for a broad range of applications, such as sensors, catalysis, and separations. However, it is challenging to tune the pore size of a single material continuously and to reversibly distinguish small molecules (below 4 angstroms). We synthesized a series of ionic covalent organic frameworks using a tetraphenoxyborate linkage that maintains meticulous synergy between structural rigidity and local flexibility to achieve continuous and reversible (100 thermal cycles) tunability of "dynamic pores" between 2.9 and 4.0 angstroms, with resolution below 0.2 angstroms. This results from temperature-regulated, gradual amplitude change of high-frequency linker oscillations. These thermoelastic apertures selectively block larger molecules over marginally smaller ones, demonstrating size-based molecular recognition and the potential for separating challenging gas mixtures such as oxygen/nitrogen and nitrogen/methane.

Low-Hydrophilic HKUST-1/Polymer Extrudates for the PSA Separation of CO2/CH4

HKUST-1 is an MOF adsorbent industrially produced in powder form and thus requires a post-shaping process for use as an adsorbent in fixed-bed separation processes. HKUST-1 is also sensitive to moisture, which degrades its crystalline structure. In this work, HKUST-1, in the form of crystalline powder, was extruded into pellets using a hydrophobic polymeric binder to improve its moisture stability. Thermoplastic polyurethane (TPU) was used for that purpose. The subsequent HKUST-1/TPU extrudate was then compared to HKUST-1/PLA extrudates synthesized with more hydrophilic polymer: polylactic acid (PLA), as the binder. The characterization of the composites was determined via XRD, TGA, SEM-EDS, and an N2 adsorption isotherm analysis. Meanwhile, the gas-separation performances of HKUST-1/TPU were investigated and compared with HKUST-1/PLA from measurements of CO2 and CH4 isotherms at three different temperatures, up to 10 bars. Lastly, the moisture stability of the composite materials was investigated via an aging analysis during storage under humid conditions. It is shown that HKUST-1's crystalline structure was preserved in the HKUST-1/TPU extrudates. The composites also exhibited good thermal stability under 523 K, whilst their textural properties were not significantly modified compared with the pristine HKUST-1. Furthermore, both extrudates exhibited larger CO2 and CH4 adsorption capacities in comparison to the pristine HKUST-1. After three months of storage under atmospheric humid conditions, CO2 adsorption capacities were reduced to only 10% for HKUST-1/TPU, whereas reductions of about 25% and 54% were observed for HKUST-1/PLA and the pristine HKUST-1, respectively. This study demonstrates the interest in shaping MOF powders by extrusion using a hydrophobic thermoplastic binder to operate adsorbents with enhanced moisture stability in gas-separation columns.

Dinuclear Copper Sulfate-Based Square Lattice Topology Network with High Alkyne Selectivity

Porous coordination networks (PCNs) sustained by inorganic anions that serve as linker ligands can offer high selectivity toward specific gases or vapors in gas mixtures. Such inorganic anions are best exemplified by electron-rich fluorinated anions, e.g., SiF62-, TiF62-, and NbOF52-, although sulfate anions have recently been highlighted as inexpensive and earth-friendly alternatives. Herein, we report the use of a rare copper sulfate dimer molecular building block to generate two square lattice, sql, coordination networks which can be prepared via solvent layering or slurrying, CuSO4(1,4-bib)1.5, 1, (1,4-bib = 1,4-bisimidazole benzene) and CuSO4(1,4-bin)1.5, 2, (1,4-bin = 1,4-bisimidazole naphthalene). Variable-temperature SCXRD and PXRD experiments revealed that both sql networks underwent reversible structural transformations due to linker rotations or internetwork displacements. Gas sorption studies conducted upon the narrow-pore phase of CuSO4(1,4-bin)1.5, 2np, found a high calculated 1:99 selectivity for C2H2 over C2H4 (33.01) and CO2 (15.18), as well as strong breakthrough performance. Across-the-board, C3H4 selectivity vs C3H6, CO2, and C3H8 was also observed. Sulfate-based PCNs, although still understudied, appear increasingly likely to offer utility in gas and vapor separations.

Structural and Adsorption Properties of ZIF-8-7 Hybrid Materials Synthesized by Acid Gas-Assisted and De Novo Routes

The tuning of micropore environments in zeolitic imidazolate frameworks (ZIFs) by mixed-linker synthesis has the potential for enabling new molecular separation properties. However, de novo synthesis of mixed-linker (hybrid) ZIFs is often challenging due to the disparate chemical properties of the different linkers. Here, we elucidate the structure and properties of an unconventional ZIF-8-7 hybrid material synthesized via a controlled-acid-gas-assisted degradation and reconstruction (solvent-assisted crystal redemption, SACRed) strategy. Selective insertion of benzimidazole (ZIF-7 linker) into ZIF-8 using SACRed is used as a facile method to generate a ZIF-8-7 hybrid material that is otherwise difficult to synthesize by de novo methods. Detailed crystal structure and textural characterizations clarify the significant differences in the microstructure of the SACRed-derived ZIF-8-7 hybrid material relative to a de novo synthesized hybrid of the same overall linker composition as well as the parent ZIF-8 material. Unary and binary adsorption measurements reveal the tunability of adsorption characteristics as well as the prevalence of nonideal cooperative mixture adsorption effects that lead to large deviations from predictions made with ideal adsorbed solution theory.

Computing Mixture Adsorption in Porous Materials through Flat Histogram Monte Carlo Methods

Mixture adsorption properties of porous materials are critical to determine their potential as adsorbents in separation applications. Toward the discovery of optimal adsorbents, in silico screening studies typically employ the grand canonical Monte Carlo (GCMC) technique to compute adsorption properties of gas mixtures in materials of interest at a given condition (i.e., composition, total pressure, and temperature) or to compute their adsorption properties for each component, followed by utilizing methods to predict mixture adsorption isotherms. However, the former approach results in the need for repeated calculations when different conditions such as compositions are considered. For the latter, the predictions may involve uncertainties, sometimes originating from the fitting quality to the pure component isotherms, and repeated simulations may also be needed for different temperatures. To this end, this study demonstrates the potential of flat histogram Monte Carlo methods in addressing the abovementioned shortfalls. Specifically, the so-called NVT + W method, first reported by Smit and co-workers, is extended herein to determine the macrostate probability distribution (MPD) of binary mixtures in porous materials. The obtained MPD can be reweighted to any conditions, yielding accurate adsorption isotherms of any desired compositions and temperatures. This approach, denoted as 2D NVT + W, is also compared with the widely adopted ideal adsorbed solution theory (IAST) method, and the former is found to offer more reliable predictions. Overall, the 2D NVT + W approach represents an efficient and effective alternative to compute mixture adsorption isotherms for porous materials, and the obtained MPD can be conveniently reused by peer researchers. A user-friendly Python code is also provided along with this article to employ this method.

Does Mixed Linker-Induced Surface Heterogeneity Impact the Accuracy of IAST Predictions in UiO-66-NH2?

To move toward more energy-efficient adsorption-based processes, there is a need for accurate multicomponent data under realistic conditions. While the Ideal Adsorbed Solution Theory (IAST) has been established as the preferred prediction method due to its simplicity, limitations and inaccuracies for less ideal adsorption systems have been reported. Here, we use amine-functionalized derivatives of the UiO-66 structure to change the extent of homogeneity of the internal surface toward the adsorption of the two probe molecules carbon dioxide and ethylene. Although it might seem plausible that more functional groups lead to more heterogeneity and, thus, less accurate predictions by IAST, we find a mixed-linker system with increased heterogeneity in terms of added adsorption sites where IAST predictions and experimental loadings agree exceptionally well. We show that incorporating uncertainty analysis into predictions with IAST is important for assessing the accuracy of these predictions. Energetic investigations combined with Grand Canonical Monte Carlo simulations reveal almost homogeneous carbon dioxide but heterogeneous ethylene adsorption in the mixed-linker material, resulting in local, almost pure phases of the individual components.

Creating Order in Ultrastable Phosphonate Metal-Organic Frameworks via Isolable Hydrogen-Bonded Intermediates

The stability presented by trivalent metal-organic frameworks (MOFs) makes them an attractive class of materials. With phosphonate-based ligands, crystallization is a challenge, as there are significantly more binding motifs that can be adopted due to the extra oxygen tether compared to carboxylate counterparts and the self-assembly processes are less reversible. Despite this, we have reported charge-assisted hydrogen-bonded metal-organic frameworks (HMOFs) consisting of [Cr(H2O)6]3+ and phosphonate ligands, which were crystallographically characterized. We sought to use these HMOFs as a crystalline intermediate to synthesize ordered Cr(III)-phosphonate MOFs. This can be done by dehydrating the HMOF to remove the aquo ligands around the Cr(III) center, forcing metal-phosphonate coordination. Herein, a new porous HMOF, H-CALF-50, is synthesized and then dehydrated to yield the MOF CALF-50. CALF-50 is ordered, although it is not single crystalline. It does, however, have exceptional stability, maintaining crystallinity and surface area after boiling in water for 3 weeks and soaking in 14.5 M H3PO4 for 24 h and 9 M HCl for 72 h. Computational methods are used to study the HMOF to MOF transformation and give insight into the nature of the structure and the degree of heterogeneity.

Aminal-Linked Covalent Organic Frameworks with hxl-a and Quasi-hcb Topologies for Efficient C2 H6 /C2 H4 Separation

In reticular chemistry, topology is a powerful concept for defining the structures of covalent organic frameworks (COFs). However, due to the lack of diversity in the symmetry and reaction stoichiometry of the monomers, only 5% of the two-dimensional topologies have been reported to be COFs. To overcome the limitations of COF connectivity and pursue novel topologies in COF structures, two aminal-linked COFs, KUF-2 and KUF-3, are prepared, with dumbbell-shaped secondary building units. Linear dialdehydes and piperazine are condensed at a ratio of 1:2 to construct an aminal linkage, leading to unreported hxl-a (KUF-2) and quasi-hcb (KUF-3) structures. Notably, KUF-3 displays top-tier C2 H6 /C2 H4 selectivity and C2 H6 uptake at 298 K, outperforming most porous organic materials. The intrinsic aromatic ring-rich and Lewis basic pore environments, and appropriate pore widths enable the selective adsorption of C2 H6 , as confirmed by Grand Canonical Monte Carlo simulations. Dynamic breakthrough curves revealed that C2 H6 can be selectively separated from a gas mixture of C2 H6 and C2 H4 . This study suggests that topology-based design of aminal-COFs is an effective strategy for expanding the field of reticular chemistry and provides the facile integration of strong Lewis basic sites for selective C2 H6 /C2 H4 separation.

Composite of MIL-101(Cr) with a Pyrrolidinium-Based Ionic Liquid Providing High CO2 Selectivity

Capturing CO₂ selectively from flue gas and natural gas addresses the criteria of a sustainable society. In this work, we incorporated an ionic liquid (IL) (1-methyl-1-propyl pyrrolidinium dicyanamide, [MPPyr][DCA]) into a metal organic framework (MOF), MIL-101(Cr), by wet impregnation and characterized the resulting [MPPyr][DCA]/MIL-101(Cr) composite in deep detail to identify the interactions between [MPPyr][DCA] molecules and MIL-101(Cr). Consequences of these interactions on the CO₂/N₂, CO₂/CH₄, and CH₄/N₂ separation performance of the composite were examined by volumetric gas adsorption measurements complemented by the density functional theory (DFT) calculations. Results showed that the composite offers remarkably high CO₂/N₂ and CH₄/N₂ selectivities of 19,180 and 1915 at 0.1 bar and 15 °C corresponding to 1144- and 510-times improvements, respectively, as compared to the corresponding selectivities of pristine MIL-101(Cr). At low pressures, these selectivities reached practically infinity, making the composite completely CO₂-selective over CH₄ and N₂. The CO₂/CH₄ selectivity was improved from 4.6 to 11.7 at 15 °C and 0.001 bar, yielding a 2.5-times improvement, attributed to the high affinity of [MPPyr][DCA] toward CO₂, validated by the DFT calculations. These results offer broad opportunities for the design of composites where ILs are incorporated into the pores of MOFs for high performance gas separation applications to address the environmental challenges.

Surprising Use of the Business Innovation Bass Diffusion Model To Accurately Describe Adsorption Isotherm Types I, III, and V

Using adsorption isotherm data to determine heats of adsorption or predict mixture adsorption using the ideal adsorbed solution theory (IAST) relies on accurate fits of the data with continuous, mathematical models. Here, we derive an empirical two-parameter model to fit isotherm data of IUPAC types I, III, and V in a descriptive way based on the Bass model for innovation diffusion. We report 31 isotherm fits to existing literature data covering all six types of isotherms, various adsorbents, such as carbons, zeolites, and metal-organic frameworks (MOFs), as well as different adsorbing gases (water, carbon dioxide, methane, and nitrogen). We find several cases, especially for flexible MOFs, where previously reported isotherm models reached their limits and either failed to fit the data or could not sufficiently be fitted due to stepped type V isotherms. Moreover, in two instances, models specifically developed for distinct systems are fitted with a higher R² value compared to the models in the original reports. Using these fits, it is demonstrated how the new Bingel-Walton isotherm can be used to qualitatively assess the hydrophilic or hydrophobic behavior of porous materials from the relative magnitude of the two fitting parameters. The model can also be employed to find matching heats of adsorption values for systems with isotherm steps using one, continuous fit instead of partial, stepwise fits or interpolation. Additionally, using our single, continuous fit to model stepped isotherms in IAST mixture adsorption predictions leads to good agreement with the results from the osmotic framework adsorbed solution theory that was specifically developed for these systems using a stepwise, approximate fitting, which is yet far more complex. Our new isotherm equation accomplishes all of these tasks with only two fitted parameters, providing a simple, accurate method for modeling a variety of adsorption behavior.

Microporous Metal-Phosphonates with a Novel Orthogonalized Linker and Complementary Guests: Insights for Trivalent Metal Complexes from Divalent Metal Complexes

The reliable self-assembly of microporous metal-phosphonate materials remains a longstanding challenge. This stems from, generally, more coordination modes for the functional group allowing more dense structures, and stronger bonding driving less crystalline products. Here, a novel orthogonalized aryl-phosphonate linker, 1,3,5-tris(4'-phosphono-2',6'-dimethylphenyl) benzene (H₆ L3) has been used to direct formation of open frameworks. The peripheral aryl rings of H₆ L3 are orthogonalized relative to the central aromatic ring giving a tri-cleft conformation of the linker in which small aromatic molecules can readily associate. When coordinated to magnesium ions, a series of porous crystalline metal-organic, and hydrogen-bonded metal-organic frameworks (MOFs, HMOFs) are formed (CALF-41 (Mg), HCALF-42 (Mg), -43 (Mg)). While most metal-organic frameworks are tailored based on choice of metal and linker, here, the network structures are highly dependent on the inclusion and structure of the guest aromatic compounds. Larger guests, and a higher stoichiometry of metal, result in increased solvation of the metal ion, resulting in networks with connectivities increasingly involving hydrogen-bonds rather than direct phosphonate coordination. Upon thermal activation and aromatic template removal, the materials exhibit surface areas ranging from 400-600 m² /g. Self-assembly in the absence of aromatic guests yields mixtures of phases, frequently co-producing a dense 3-fold interpenetrated structure (1). Interestingly, a series of both more porous (530-900 m² /g), and more robust solids is formed by complexing with trivalent metal ions (Al, Ga, In) with aromatic guest; however, these are only attainable as microcrystalline powders. The polyprotic nature of phosphonate linkers enables structural analogy to the divalent analogues and these are identified as CALF-41 analogues. Finally, insights to the structural transformations during metal ion desolvation in this family are gained by considering a pair of structurally related Co materials, whose hydrogen-bonded (HCALF-44 (Co)) and desolvated (CALF-44 (Co)) coordination bonded networks were fully structurally characterized.

Developing Water-Stable Pore-Partitioned Metal-Organic Frameworks with Multi-Level Symmetry for High-Performance Sorption Applications

A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C₃ H₆ /C₂ H₄ and C₂ H₂ /CO₂ selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.

Design and Screening of Metal-Organic Frameworks for Ethane/Ethylene Separation

Separation of ethane and ethylene is considered to be industrially important for various chemical processes, but their similarities make the process expensive. In this study, we integrated computational screening with machine learning to find optimal metal-organic frameworks (MOFs) with high ethane/ethylene selectivity. Using our algorithm, a hypothetical MOF structure with an ideal adsorption solution theory selectivity of 3.6 at 298 K and 1 bar was discovered. Furthermore, structural analysis was implemented, and the full adsorption isotherm of some of the top structures was obtained.

An Amine-Functionalized Ultramicroporous Metal-Organic Framework for Postcombustion CO2 Capture

Among the most promising methods by which to capture CO₂ from flue gas, the emission of which has accelerated global warming, is energy-efficient physisorption using metal-organic framework (MOF) adsorbents. Here, we present a novel cuprous-based ultramicroporous MOF, Cu(adci)-2 (adci^- = 2-amino-4,5-dicyanoimidazolate), which was rationally synthesized by combining two strategies to design MOF physisorbents for enhanced CO₂ capturing, i.e., aromatic amine functionalization and the introduction of ultramicroporosity (pore size <7 Å). Synchrotron powder X-ray diffraction and a Rietveld analysis reveal that the Cu(adci)-2 structure has one-dimensional square-shaped channels, in each of which all affiliated ligands, specifically NH₂ groups at the 2-position of the imidazolate ring, have the same orientation, with a pair of NH₂ groups therefore facing each other on opposite sides of the channel walls. While Cu(adci)-2 exhibits a high CO₂ adsorption capacity (2.01 mmol g^-1 at 298 K and 15 kPa) but a low zero-coverage isosteric heat of adsorption (27.5 kJ mol^-1), breakthrough experiments under dry and 60% relative humidity conditions show that its CO₂ capture ability is retained even in the presence of high amounts of moisture. In a Monte Carlo simulation and a radial distribution analysis, the preferential CO₂ binding site of Cu(adci)-2 was predicted to be between two ligands, forming a sandwich-like structure and implying that its CO₂ adsorption properties originate from the enhancement of Lewis base-acid and London dispersion interactions due to the amino groups and ultramicroporosity, respectively.

CO 2 Separation by Imide/Imine Organic Cages

Two novel imide/imine‐based organic cages have been prepared and studied as materials for the selective separation of CO₂ from N₂ and CH₄ under vacuum swing adsorption conditions. Gas adsorption on the new compounds showed selectivity for CO₂ over N₂ and CH₄. The cages were also tested as fillers in mixed‐matrix membranes for gas separation. Dense and robust membranes were obtained by loading the cages in either Matrimid® or PEEK‐WC polymers. Improved gas‐transport properties and selectivity for CO₂ were achieved compared to the neat polymer membranes.

Adjustable Functionalization of Hyper-Cross-Linked Polymers of Intrinsic Microporosity for Enhanced CO2 Adsorption and Selectivity over N2 and CH4

In this paper, we report the design, synthesis, and characterization of a series of hyper-cross-linked polymers of intrinsic microporosity (PIMs), with high CO₂ uptake and good CO₂/N₂ and CO₂/CH₄ selectivity, which makes them competitive for carbon capture and biogas upgrading. The starting hydrocarbon polymers' backbones were functionalized with groups such as -NO₂, -NH₂, and -HSO₃, with the aim of tuning their adsorption selectivity toward CO₂ over nitrogen and methane. This led to a significant improvement in the performance in the potential separation of these gases. All polymers were characterized via Fourier transform infrared (FTIR) spectroscopy and ¹³C solid-state NMR to confirm their molecular structures and isothermal gas adsorption to assess their porosity, pore size distribution, and selectivity. The insertion of the functional groups resulted in an overall decrease in the porosity of the starting polymers, which was compensated with an improvement in the final CO₂ uptake and selectivity over the chosen gases. The best uptakes were achieved with the sulfonated polymers, which reached up to 298 mg g^-1 (6.77 mmol g^-1), whereas the best CO₂/N₂ selectivities were recorded by the aminated polymers, which reached 26.5. Regarding CH₄, the most interesting selectivities over CO₂ were also obtained with the aminated PIMs, with values up to 8.6. The reason for the improvements was ascribed to a synergetic contribution of porosity, choice of the functional group, and optimal isosteric heat of adsorption of the materials.

Ultrahigh Size Exclusion Selectivity for Carbon Dioxide from Nitrogen/Methane in an Ultramicroporous Metal-Organic Framework

Separations based on molecular size (molecular sieving) are a solution for environmental remediation. We have synthesized and characterized two new metal-organic frameworks (MOFs) (Zn₂M; M = Zn, Cd) with ultramicropores (<0.7 nm) suitable for molecular sieving. We explore the synthesis of these MOFs and the role that the DMSO/H₂O/DMF solvent mixture has on the crystallization process. We further explore the crystallographic data for the DMSO and methanol solvated structures at 273 and 100 K; this not only results in high-quality structural data but also allows us to better understand the structural features at temperatures around the gas adsorption experiments. Structurally, the main difference between the two MOFs is that the central metal in the trimetallic node can be changed from Zn to Cd and that results in a sub-Å change in the size of the pore aperture, but a stark change in the gas adsorption properties. The separation selectivity of the MOF when M = Zn is infinite given the pore aperture of the MOF can accommodate CO₂ while N₂ and/or CH₄ is excluded from entering the pore. Furthermore, due to the size exclusion behavior, the MOF has an adsorption selectivity of 4800:1 CO₂/N₂ and 5 × 10²⁸:1 CO₂/CH₄. When M = Cd, the pore aperture of the MOF increases slightly, allowing N₂ and CH₄ to enter the pore, resulting in a 27.5:1 and a 10.5:1 adsorption selectivity, respectively; this is akin to UiO-66, a MOF that is not able to function as a molecular sieve for these gases. The data delineate how subtle sub-Å changes to the pore aperture of a framework can drastically affect both the adsorption selectivity and separation selectivity.

Polymeric Fiber Sorbents Embedded with Porous Organic Cages

The synthesis and functionalization of porous organic cages (POCs) for separation have attracted growing interest over the past decade. However, the potential of solid-phase POCs for practical, large-scale separations will require incorporation into appropriate gas-solid or liquid-solid contactors. Contactors with more effective mass transfer properties and lower pressure drops than pelletized systems are preferred. Here, we prepared and characterized fiber sorbents with POCs throughout a cellulose acetate (CA) polymer matrix, which were then deployed in model separations. The POC CC3 was shown to be stable after exposure to spinning solvents, as confirmed by NMR, powder X-ray diffraction, and gas sorption experiments. CC3-CA fibers were spun using the dry-jet wet-quench spinning method. Spun fibers retained the adsorptive properties of CC3 powders, as confirmed by CO₂ and N₂ physisorption and TGA, reaching upward of 60 wt % adsorbent loading, whereas the pelletized CC3 counterparts suffered significant losses in textural properties. The separation capabilities of the CC3-CA fibers are tested with both simulated postcombustion flue gas and with Xe/Kr mixtures. Fixed bed breakthrough experiments performed on fibers samples show that CC3 embedded in polymeric fibers can effectively perform these proof-of-concept gas separations. The development of fiber sorbents embedded with POCs provides an alternative to traditional pelletization for the incorporation of these materials into adsorptive separation systems.

Flexible and porous 2D layered structures based on mixed-linker metal-organic frameworks for gas sorption studies

Layered structures of flexible mixed-linker metal-organic frameworks termed IRHs-(4 and 5) (IRH = Institut de Recherche sur l'Hydrogène) were synthesized by mixing cyclam, tetrakis(4-carboxyphenyl)benzene (TCPB), and copper and zinc metal salts respectively. The new materials characterized by single-crystal X-ray diffraction exhibited the features of HOFs and MOFs. Their structures are formed by coordination and hydrogen bonds that link metallocyclam (with Cu or Zn) and TCPB to a 2D sheet which is further packed to form a 3D structure with 1D microchannels. Remarkably, the as-synthesized IRHs-(4 and 5) contain DMF in the channels that can be exchanged with DCM and afterward removed from the framework by heating without losing their single-crystallinity. This enabled an easy elucidation of the structural transformations by single-crystal and powder X-ray diffraction analyses. Experimental studies of single-component adsorption isotherms of pure CO2, CH4, and N2 gases have been carried out for all activated IRHs. Based on the obtained adsorption isotherms, theoretical calculations using Ideal Adsorbed Solution Theory (IAST) have been performed to predict the selectivity of equimolar CO2/CH4 and CO2/N2 (1 : 1) binary mixtures. The simulations predicted outstanding selectivity for CO2/N2 than for CO2/CH4 at low pressures, reaching 185 for IRH-4 and 130 for IRH-5 at 1 bar.

High-Throughput Discovery of Ni(IN)2 for Ethane/Ethylene Separation

Although ethylene (C2 H4 ) is one of the most critical chemicals used as a feedstock in artificial plastic chemistry fields, it is challenging to obtain high-purity C2 H4 gas without any trace ethane (C2 H6 ) by the oil cracking process. Adsorptive separation using C2 H6 -selective adsorbents is beneficial because it directly produces high-purity C2 H4 in a single step. Herein, Ni(IN)2 (HIN = isonicotinic acid) is computationally discovered as a promising adsorbent with the assistance of the multiscale high-throughput computational screening workflow and Computation-Ready, Experimental (CoRE) metal-organic framework (MOF) 2019 database. Ni(IN)2 is subsequently synthesized and tested to show the ideal adsorbed solution theory (IAST) selectivity of 2.45 at 1 bar for a C2 H6 /C2 H4 mixture (1:15), which is one of the top-performing selectivity values reported for C2 H6 -selective MOFs as well as excellent recyclability, suggesting that this material is a promising C2 H6 -selective adsorbent. Process-level simulation results based on experimental isotherms demonstrate that the material is one of the top materials reported to date for ethane/ethylene separation under the conditions considered in this work.

Robust Supramolecular Nano-Tunnels Built from Molecular Bricks*

Herein we report a linear ionic molecule that assembles into a supramolecular nano-tunnel structure through synergy of trident-type ionic interactions and π-π stacking interactions. The nano-tunnel crystal exhibits anisotropic guest adsorption behavior. The material shows good thermal stability and undergoes multi-stage single-crystal-to-single-crystal phase transformations to a nonporous structure on heating. The material exhibits a remarkable chemical stability under both acidic and basic conditions, which is rarely observed in supramolecular organic frameworks and is often related to structures with designed hydrogen-bonding interactions. Because of the high polarity of the tunnels, this molecular crystal also shows a large CO₂ -adsorption capacity while excluding other gases at ambient temperature, leading to high CO₂ /CH₄ selectivity. Aggregation-induced emission of the molecules gives the bulk crystals vapochromic properties.

Significant role of thorny surface morphology of polyaniline on adsorption of triiodide ions towards counter electrode in dye-sensitized solar cells

Revealing the adsorption behavior of polyaniline with thorny surface morphology towards triiodide ions and its impact on the dye-sensitized solar cell performance.

Improving CO2 Separation Performance of MIL-53(Al) by Incorporating 1-n-Butyl-3-Methylimidazolium Methyl Sulfate

1-n-Butyl-3-methylimidazolium methyl sulfate is incorporated into MIL-53(Al). Detailed characterization is done by X-ray fluorescence, Brunauer-Emmett-Teller surface area, scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. Results show that ionic liquid (IL) interacts directly with the framework, significantly modifying the electronic environment of MIL-53(Al). Based on the volumetric gas adsorption measurements, CO2, CH4, and N2 adsorption capacities decreased from 112.0, 46.4, and 19.6 cc (STP) gMIL-53(Al) -1 to 42.2, 13.0, and 4.3 cc (STP) gMIL-53(Al) -1 at 5 bar, respectively, upon IL incorporation. Data show that this postsynthesis modification leads to more than two and threefold increase in the ideal selectivity for CO2 over CH4 and N2 separations, respectively, as compared with pristine MIL-53(Al). The isosteric heat of adsorption (Qst) values show that IL incorporation increases CO2 affinity and decreases CH4 and N2 affinities. Cycling adsorption-desorption measurements show that the composite could be regenerated with almost no decrease in the CO2 adsorption capacity for six cycles and confirm the lack of any significant IL leaching. The results offer MIL-53(Al) as an excellent platform for the development of a new class of IL/MOF composites with exceptional performance for CO2 separation.

A new approach to enhancing the CO2 capture performance of defective UiO-66 via post-synthetic defect exchange

Zirconium-based metal-organic frameworks (Zr-MOFs) are a subclass of MOFs known for their remarkable stability, especially in the presence of water. This makes them extremely attractive for practical applications, including CO₂ capture from industrial emission sources; however, the CO₂ adsorption capacity of Zr-MOFs is moderate compared to that of the best performing MOFs reported to date. Functionalization of Zr-MOFs with amino groups has been demonstrated to increase their affinity for CO₂. In this work, we assessed the potential of post-synthetic defect exchange (PSDE) as an alternative approach to introduce amino functionalities at missing-cluster defective sites in formic acid modulated UiO-66. Both pyridine-containing (picolinic acid and nicotinic acid) and aniline-containing (3-aminobenzoic acid and anthranilic acid) monocarboxylates were integrated within defective UiO-66 with this method. Non-defective UiO-66 modified with linkers bearing the same amino groups (2,5-pyridinedicarboxylic acid and 2-aminoterephthalic acid) were prepared by classical post-synthetic ligand exchange (PSE), in order to compare the effect of introducing functionalities at defective sites versus installing them on the backbone. PSDE reduces the porosity of defective UiO-66, but improves both the CO₂ uptake and the CO₂/N₂ selectivity, whereas PSE has no effect on the porosity of non-defective UiO-66, improving the CO₂ uptake but leaving selectivity unchanged. Modification of defective UiO-66 with benzoic acid reveals that pore size reduction is the main factor responsible for the observed uptake improvement, whereas the presence of nitrogen atoms in the pores seems to be beneficial for increasing selectivity.

Effect of methylation of ionic liquids on the gas separation performance of ionic liquid/metal-organic framework composites

1-N-Butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF6], and its methylated form, 1-N-butyl-2,3-dimethylimidazolium hexafluorophosphate, [BMMIM][PF6], were incorporated into CuBTC to examine the effect of methylation of ionic liquids (ILs) on the gas separation performance of the corresponding IL/metal-organic framework (MOF) composites. Spectroscopic analysis revealed that the interactions of the methylated ILs with CuBTC were weaker compared to those of its non-methylated counterpart. Gas uptake measurements illustrated that this difference in the interactions influences the gas separation performance of the composites. Accordingly, the CO2/N2: 15/85 and CH4/N2: 50/50 selectivities increased by 37% and 60% for [BMMIM][PF6]/CuBTC and 34% and 50% for [BMIM][PF6]/CuBTC, respectively, compared to the corresponding selectivities of pristine CuBTC at 1000 mbar. The results revealed another structural parameter controlling the performance of the IL/MOF composites, a novel type of material with rapidly expanding application areas.