Supercritical Fluid Extraction of Bioactive Compounds: Fundamentals, Applications and Economic Perspectives

Recent progress in the extraction of terpenoids from essential oils and separation of the enantiomers by GC-MS

Terpenoids possess significant physiological activities and are rich in essential oils. Some terpenoids have chiral centers and could form enantiomers with distinct physiological activities. Therefore, the extraction and separation of terpenoids enantiomers are very important and have attracted extensive attention in recent years. Meanwhile, the specific distribution and enantiomer excess results (the excess of one enantiomer over the other in a mixture of enantiomers) could be used as quality markers for illegitimate adulteration, origin identification, and exploring component variations and functional interrelations across different plant tissues. In this study, an overview of the progress in the extraction of terpenoids from essential oils and the separation of their enantiomers over the past two decades has been made. Extraction methods were retrieved by the resultant network visualization findings. The results showed that the predominant methods are hydrodistillation, solvent-free microwave extraction, headspace solid-phase microextraction and supercritical fluid extraction methods. GC-MS combined with chiral chromatography columns is commonly used for the separation of enantiomers, while 2D GC is found to have stronger resolution ability. Finally, some prospects for future research directions in the extraction and separation identification of essential oils are proposed.

Supercritical extraction of betalains from the peel of different pitaya species

BACKGROUND

Pitaya is a fruit with high consumer acceptance and health benefits. Pitaya peel is a waste product with potential in the food industry, as an antioxidant enrichment and natural colouring. Therefore, there is an interest in recovering its constituents and searching for pitaya species with greater potential. This work aimed to obtain bioactive extracts from the dried peel of pitaya fruits of the species Selenicereus monacanthus (Lem.), S. costaricensis W. and S. undatus H. using supercritical fluids at different pressures (100, 250 and 400 bar) and ethanol-water 15% v/v or ethanol 100% as co-solvents. The extraction yield, antioxidant activity, colour and total betalain content were evaluated.

RESULTS

The extract obtained from S. monacanthus showed the highest extraction yield (49.6 g kg-1), followed by S. costaricensis (27.5 g kg-1) and S. undatus (17.7 g kg-1) at 400 bar and 35 °C using ethanol 15%, v/v. The antioxidant capacity was strongly influenced by pressure, favouring the obtaining of betalain-rich extracts at higher pressures, especially in the species S. costaricensis (0.6 g kg-1) and S. monacanthus (0.3 g kg-1). To improve the extraction of S. undatus (the most cultivated species), the procedure of subsequential extractions was applied. This procedure considerably increased the extraction yield, antioxidant activity and total content of betalains. The use of ethanol 100% provided more bioactive fractions and achieved a good separation of betalains.

CONCLUSION

The supercritical extraction method can overcome the challenge of efficiently extracting compounds from pitaya peel, due to the presence of bioactive compounds of great polarity. © 2024 Society of Chemical Industry.

Sustainable strategies for using natural extracts in smart food packaging

The growing demand for sustainable and eco-friendly food packaging has prompted research on innovative solutions to environmental and consumer health issues. To enhance the properties of smart packaging, the incorporation of bioactive compounds derived from various natural sources has attracted considerable interest because of their functional properties, including antioxidant and antimicrobial effects. However, extracting these compounds from natural sources poses challenges because of their complex chemical structures and low concentrations. Traditional extraction methods are often environmentally harmful, expensive and time-consuming. Thus, green extraction techniques have emerged as promising alternatives, offering sustainable and eco-friendly approaches that minimise the use of hazardous solvents and reduce environmental impact. This review explores cutting-edge research on the green extraction of bioactive compounds and their incorporation into smart packaging systems in the last 10 years. Then, an overview of bioactive compounds, green extraction techniques, integrated techniques, green extraction solvents and their application in smart packaging was provided, and the impact of bioactive compounds incorporated in smart packaging on the shelf lives of food products was explored. Furthermore, it highlights the challenges and opportunities within this field and presents recommendations for future research, aiming to contribute to the advancement of sustainable and efficient smart packaging solutions.

Green Extraction Approach for Isolation of Bioactive Compounds in Wild Thyme (Thymus serpyllum L.) Herbal Dust-Chemical Profile, Antioxidant and Antimicrobial Activity and Comparison with Conventional Techniques

The aim of this study was to provide a chemical profile and determine the antioxidant and antimicrobial activity of the essential oil (EO) and lipid extracts of Thymus serpyllum L. herbal dust obtained via conventional (hydrodistillation (HD) and Soxhlet extraction (SOX)) and novel extraction techniques (supercritical fluid extraction (SFE)). In addition, a comparative analysis of the chemical profiles of the obtained EO and extracts was carried out, as well as the determination of antioxidant, antibacterial and antifungal activity of the lipid extracts. According to the aforementioned antioxidant and antimicrobial activities and the monoterpene yield and selectivity, SFE provided significant advantages compared to the traditional techniques. In addition, SFE extracts could be considered to have great potential in terms of their utilization in the pharmaceutical and cosmetic industries, as well as appropriate replacements for synthetic additives in the food industry.

Agave angustifolia Haw. Leaves as a Potential Source of Bioactive Compounds: Extraction Optimization and Extract Characterization

The leaves of Agave angustifolia Haw. are the main agro-waste generated by the mezcal industry and are becoming an important source of bioactive compounds, such as phenolic compounds, that could be used in the food and pharmaceutical industries. Therefore, the extraction and identification of these phytochemicals would revalorize these leaf by-products. Herein, maceration and supercritical carbon dioxide (scCO2) extractions were optimized to maximize the phenolic and flavonoid contents and the antioxidant capacity of vegetal extracts of A. angustifolia Haw. In the maceration process, the optimal extraction condition was a water-ethanol mixture (63:37% v/v), which yielded a total phenolic and flavonoid content of 27.92 ± 0.90 mg EAG/g DL and 12.85 ± 0.53 µg QE/g DL, respectively, and an antioxidant capacity of 32.67 ± 0.91 (ABTS assay), 17.30 ± 0.36 (DPPH assay), and 13.92 ± 0.78 (FRAP assay) µM TE/g DL. Using supercritical extraction, the optimal conditions for polyphenol recovery were 60 °C, 320 bar, and 10% v/v. It was also observed that lower proportions of cosolvent decreased the polyphenol extraction more than pressure and temperature. In both optimized extracts, a total of 29 glycosylated flavonoid derivatives were identified using LC-ESI-QTof/MS. In addition, another eight novel compounds were identified in the supercritical extracts, showing the efficiency of the cosolvent for recovering new flavonoid derivatives.

Toxicity, metabolism, and mitigation strategies of acrylamide: a comprehensive review

Acrylamide, a food-borne chemical toxicant, has raised global concern in recent decades. It mainly originated from reducing sugar and free amino acid interactions in the carbohydrate-rich foodstuffs heated at high temperatures. Due to the neurotoxicity and carcinogenicity of AA, the mechanism of formation, toxic effects on health, and mitigation strategies, including conventional approaches and innovative technologies, have been of great interest since its discovery in food. Potato products (especially French fries and crisps), coffee, and cereals(bread and biscuit) are renowned contributors to AA's daily intake. The best preventive methods discussed in the literature include time/temperature optimization, blanching, enzymatic treatment, yeast treatment, additives, pulsed electric fields, ultrasound, vacuum roasting, air frying, and irradiation, exhibiting a high efficacy in AA elimination in food products.

Secondary metabolites of the leaves of Tricalysia atherura N. Hallé (Rubiaceae) and their potential antiplasmodial activity

One monoterpene indole alkaloid, atheruramine (1) bearing an ether bridge linking, one hydrobenzoin derivative, tricalydioloside (2) and two ursane-type triterpenes, atherurosides (A and B) (3 and 4) were isolated from the leaves of Tricalysia atherura, together with eight known compounds. The structures of these new compounds were elucidated on the basis of the results of spectroscopic analysis, and the relative configurations of compounds 1-3 were established by NOE difference. Four of the metabolites were screened in vitro against both chloroquine (CQ)-sensitive (3D7) and -resistant (Dd2) strains of Plasmodium falciparum; they were found to exhibit moderate activity against chloroquine-resistant (Dd2) (IC50 64.99-92.29 μg/mL). Meanwhile, crude extract possesses high antiplasmodial activity against both 3D7 and Dd2 strains of P. falciparum (IC50 4.39-7.54 μg/mL) and high selectivity indices values (SI > 10) and was found to be safe.

Supercritical Carbon Dioxide Technology for Recovering Valuable Phytochemicals from Cannabis sativa L. and Valorization of Its Biomass for Food Applications

Supercritical carbon dioxide (CO₂) extraction techniques meet all-new consumer market demands for health-promoting phytochemical compound-rich extracts produced from green and sustainable technology. In this regard, this review is dedicated to discussing is the promise of integrating high-pressure CO₂ technologies into the Cannabis sativa L. processing chain to valorize its valuable pharmaceutical properties and food biomass. To do this, the cannabis plant, cannabinoids, and endocannabinoid system were reviewed to understand their therapeutic and side effects. The supercritical fluid extraction (SFE) technique was presented as a smart alternative to producing cannabis bioproducts. The impact of SFE operating conditions on cannabis compound extraction was examined for aerial parts (inflorescences, stems, and leaves), seeds, and byproducts. Furthermore, the opportunities of using non-thermal supercritical CO₂ processing on cannabis biomass were addressed for industrial hemp valorization, focusing on its biorefinery to simultaneously produce cannabidiol and new ingredients for food applications as plant-based products.

Extraction of hops pelletized (Humulus lupulus) with subcritical CO2 and hydrodistillation: Chemical composition identification, kinetic model, and evaluation of antioxidant and antimicrobial activity

Hop essential oil and hop extract using carbon dioxide (CO₂) are products with high added value because they have bioactive and sensory properties. In this context, the objective of this study was to obtain and characterize essential oil and extracts from pelleted hops of El Dorado, Polaris, Hallertau Blanc and Callista varieties using hydrodistillation and subcritical CO₂ extraction methods. Extraction yield ranged from 0.38 % to 1.97 % (m/m) for essential oils and from 8.76 % to 15.35 % (m/m) for extracts using subcritical CO₂. The chemical compositions of the essential oils were mainly monoterpene (18.14 % to 29.91 %) and sesquiterpene (46.01 % to 59.03 %) hydrocarbons and for the extracts were sesquiterpene hydrocarbons (33.05 % to 71.90 %) and oxygenated sesquiterpenes (14.80 % to 34.89 %). The extracts showed better antioxidant activity than essential oils due to the presence of phenolic compounds and flavonoids. Hop extracts showed some antimicrobial activity, but essential oils did not demonstrate antimicrobial potential. Hop extracts obtained with subCO₂ have the potential to be used in the brewing industry as a flavoring and as natural antioxidants.

Novel strategies for extraction, purification, processing, and stability improvement of bioactive molecules

Bioactive molecules gain significance in pharmaceutical and nutraceutical industries for showcasing various beneficial biological properties including but not limited to anticancer, antimicrobial, antioxidant, antifungal, anti-inflammatory, cardioprotective, neuroprotective, and antidiabetic. However, the practice of using traditional approaches to produce bioactive molecules is gradually declining due to various limitations such as low product quality, high toxicity, low product yield, low efficiency, and product degradation. Thus, with the escalating demand for these bioactive molecules and active agents in food and other food-related industries, it has become a dire need for the scientific world to come up with novel approaches and strategies that cannot just improve the quality of these bioactives but also prepare them in a comparatively shorter time span. This review includes the latest approaches and techniques used either independently or in combinations for the extraction, purification, processing, and stability improvement of general bioactive molecules. Different parameters of these versatile techniques have been discussed with their effectiveness and work principles.

A Novel Strategy for the Separation of Functional Oils from Chamomile Seeds

The main aim of this study was to evaluate the oils from chamomile seeds as a new source of bioactive compounds suitable for human consumption. A green extraction technique with supercritical carbon dioxide (sc-CO2) at pressures up to 450 bar and temperatures up to 60 °C was employed for the production of a high amount of biologically active oil. Additionally, exhausted waste material was re-extracted using sc-CO2 with the addition of ethanol. By optimization in operating pressure, temperature, production cost, fraction of milled seeds, and co-solvent addition, the amount of separated chamomile oil increased from 2.4 to 18.6% and the content of unsaturated fatty acids up to 88.7%. Oils contained α-bisabolol oxide A and B in amounts up to 1.4%. Linoleic acid was detected in an amount up to 711.1 mg/g and α-linolenic acid up to 27.5 mg/g. The total phenolic content in separated oil reached 80.4 mg GAE/g while the total flavonoid content reached 11.6 mg QE/g. The obtained chamomile oils showed antioxidant activity with an IC50 of up to 3.9 mg/mL. Among the 23 tested microorganisms, the antimicrobial activity of oils was the most pronounced against Gram-positive bacteria. The cytotoxic activity of oils was tested on normal and cancer-derived cell lines. Results indicated a significant potential for oil from chamomile seeds, produced in an eco-friendly manner, as a functional food.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11947-023-03038-9.

Systematizing Microbial Bioplastic Production for Developing Sustainable Bioeconomy: Metabolic Nexus Modeling, Economic and Environmental Technologies Assessment

The excessive usage of non-renewable resources to produce plastic commodities has incongruously influenced the environment's health. Especially in the times of COVID-19, the need for plastic-based health products has increased predominantly. Given the rise in global warming and greenhouse gas emissions, the lifecycle of plastic has been established to contribute to it significantly. Bioplastics such as polyhydroxy alkanoates, polylactic acid, etc. derived from renewable energy origin have been a magnificent alternative to conventional plastics and reconnoitered exclusively for combating the environmental footprint of petrochemical plastic. However, the economically reasonable and environmentally friendly procedure of microbial bioplastic production has been a hard nut to crack due to less scouted and inefficient process optimization and downstream processing methodologies. Thereby, meticulous employment of computational tools such as genome-scale metabolic modeling and flux balance analysis has been practiced in recent times to understand the effect of genomic and environmental perturbations on the phenotype of the microorganism. In-silico results not only aid us in determining the biorefinery abilities of the model microorganism but also curb our reliance on equipment, raw materials, and capital investment for optimizing the best conditions. Additionally, to accomplish sustainable large-scale production of microbial bioplastic in a circular bioeconomy, extraction, and refinement of bioplastic needs to be investigated extensively by practicing techno-economic analysis and life cycle assessment. This review put forth state-of-the-art know-how on the proficiency of these computational techniques in laying the foundation of an efficient bioplastic manufacturing blueprint, chiefly focusing on microbial polyhydroxy alkanoates (PHA) production and its efficacy in outplacing fossil based plastic products.

Optimization of Supercritical Carbon Dioxide Extraction of Polyphenols from Black Rosehip and Their Bioaccessibility Using an In Vitro Digestion/Caco-2 Cell Model

The fruits of Rosa pimpinellifolia are rich sources of (poly)phenols, however they are underutilized due to the limited information available. The influence of the pressure, temperature, and co-solvent concentration (aqueous ethanol) of the supercritical carbon dioxide extraction (SCO₂-aqEtOH) on the extraction yield, total phenolic-, total anthocyanin-, catechin-, cyanidin-3-O-glucoside contents, and total antioxidant activity of black rosehip was investigated simultaneously. The maximum obtained total phenolic and total anthocyanin contents under the optimized extraction conditions (280 bar, 60 °C and 25% ethanol, v/v) were 76.58 ± 4.25 mg gallic acid equivalent and 10.89 ± 1.56 mg cyanidin-3-O-glucoside equivalent per g of the dry fruits, respectively. The optimal extract obtained by SCO₂-aqEtOH was compared to two other extraction procedures: ultrasonication using ethanol as solvent (UA-EtOH) and pressurized hot water extraction (PH-H₂O). The bioaccessibility and cellular metabolism of the phenolic compounds in the different black rosehip extracts were assessed using an in vitro digestion coupled with a human intestinal Caco-2 cell model. The in vitro digestive stability and cellular uptake of the phenolic compounds had no significant difference among the different extraction methods. The results of this study confirm the efficiency of SCO₂-aqEtOH extraction for phenolic compounds and, in particular, for anthocyanins, and could be used to produce new functional food ingredients from black rosehip with high antioxidant power containing both hydrophilic and lipophilic compounds.

Modeling and Optimization of the Isolation of Blackcurrant and Black Cumin Seeds Oils Using Supercritical Fluid Extraction

Supercritical fluid extraction is a powerful analytical tool and it is willingly used by researchers for the isolation of various components from different matrices. In our study, the carbon dioxide in the supercritical state was used for the extraction of oils from blackcurrant and black cumin seeds. To determine the optimal conditions for the process (temperature, pressure and time), the method of statistical experiment planning and the Box-Behnken design was applied and the yield of the oils and the content of fatty acids (FAs) were taken into consideration. It has been found that an increase in pressure causes an increase in extraction yield (W), and an increase in temperature, both at constant pressure and time, does not significantly change the yield value. Optimal yield values were obtained for both materials under almost similar extraction parameters: 306 bar/ 43 min/ 50 °C (blackcurrant) and 282 bar/ 40 min/ 50 °C (black cumin). The influence of the above parameters (T, p, t) on the content of FAs in the extracts has a slightly different trend. The use of supercritical carbon dioxide for the extraction of blackcurrant and black cumin seeds allowed for high process yield and high-quality, rich in polyunsaturated fatty acids oils which can be used as a substrate or final product for industry.

Preliminary Studies on the Purification of Bleaching Earth from Slack Wax Residues in the Adsorption Refining by Low-Temperature Pyrolysis Process

The essence of the low-temperature pyrolysis process presented below is the processing of contaminated bleaching earth, resulting in a purified bleaching earth, high calorific oil with an average level of 45.5 MJ / kg and synthesis gas that can be used to heat the reactor. For research purposes, a proprietary low-pressure reactor with a system of direct cooling of hydrocarbon vapors was used. The main advantages of the presented method are the limitation of technological processes to a minimum and the ease of automation by reducing the entire cycle to one device.

Multi-Metabolomics Coupled with Quantitative Descriptive Analysis Revealed Key Alterations in Phytochemical Composition and Sensory Qualities of Decaffeinated Green and Black Tea from the Same Fresh Leaves

The supercritical CO₂-based decaffeination (SCD) method can be used to prepare decaffeinated tea, but its overall effect on the phytochemicals, volatiles, and sensory qualities of green and black teas is still unclear, and its suitability to prepare decaffeinated green and black teas still needs to be compared. This study revealed the effect of SCD on phytochemicals, volatiles, and sensory qualities in black and green tea prepared from the same tea leaves, and compared the suitability of preparing decaffeinated green and black teas using SCD. The results showed that the SCD could remove 98.2 and 97.1% of the caffeine in green and black tea, respectively. However, it can cause further losses of phytochemicals in green and black teas, specifically the loss of epigallocatechin gallate, epigallocatechin, epicatechin gallate, and gallocatechin gallate in green tea and the loss of theanine and arginine in green and black teas. After the decaffeination, both green and black teas lost some volatiles but also generated new volatiles. Especially, the fruit/flower-like aroma, ocimene, linalyl acetate, geranyl acetate, and D-limonene, were generated in the decaffeinated black tea, while herbal/green-like aroma, β-cyclocitral, 2-ethylhexanol, and safranal, were generated in the decaffeinated green tea. The overall acceptance of decaffeinated green tea decreased due to the substantial reduction in bitterness and astringency, while the overall acceptance of decaffeinated black tea significantly increased. Therefore, SCD is more suitable for the preparation of decaffeinated black tea.

Optimization of Extraction of Natural Antimicrobial Pigments Using Supercritical Fluids: A Review

It has become increasingly popular to replace chemically synthesized compounds with natural counterparts mostly found in natural sources, such as natural pigments. The conventional extraction processes for these compounds are limited by the toxicity and flammability of the solvents. To obtain pure extracts, it is always a longer process that requires several steps. Supercritical fluid extraction (SFE) is a cutting-edge green technology that is continuously increasing and expanding its fields of application, with benefits such as no waste produced, shorter extraction time, automation, and lower solvent consumption. The SFE of natural pigments has high potential in food, textiles, cosmetics, and pharmaceuticals; there are a number of other applications that can benefit from the SFE technique of natural pigments. The pigments that are extracted via SFE have a high potential for application and sustainability because of their biological and antimicrobial properties as well as low environmental risk. This review provides an update on the SFE technique, specifically as it pertains to the optimization of health-promoting pigments. This review focuses on antimicrobial pigments and the high efficiency of SFE in extracting pure antimicrobial pigments. In addition, the optimal conditions, biological activities, and possible applications of each category are explained.

Effect of novel combination processing technologies on extraction and quality of rice bran oil

Rice bran, a primary by-product from the rice processing industries, containing 10-15% oil, attracts significant attention from consumers due to its many health-promoting effects. The extraction methodology used is one of the most critical factors affecting the quality and yield of oil from rice bran. Using solvents is the current commercial process for rice bran oil extraction, which has its setbacks. It is challenging and expensive, and there is a risk of traces of solvent residue in the oil. Emerging combination extraction technologies offer zero to minimal solvent residues or chemical deformation while considering increasing environmental and energy footprint. Emerging combination processing technologies include new-age methods like supercritical fluid extraction, sub-critical fluid extraction, ultrasound-assisted enzymatic extraction, ohmic heating, and microwave-assisted extraction. These techniques have been reported to extract oil from rice bran, improving extraction efficiency and quality. These techniques demonstrate solid prospects for future applications. The present review discusses and compares these emerging technologies for oil extraction from rice bran commercially.

Supercritical CO2 extraction, chemical composition, and antioxidant effects of Coreopsis tinctoria Nutt. oleoresin

Coreopsis tinctoria Nutt. was used to extract oleoresin through supercritical CO₂ extraction technology. The extraction conditions were optimized using response surface methodology, and the chemical composition of C. tinctoria Nutt. oleoresin (CTO) was analyzed. Under the optimal conditions, the antioxidant activity of oleoresin was determined using 1,1-diphenyl-2-picrylhydrazyl (DPPH˙) and 2,2′-azino-bis-(3-ethylbenzo-thiazoline-6-sulphonic acid)diammonium salt (ABTS˙⁺) free radical scavenging assays. The optimal extraction conditions were a 27.5 MPa extraction pressure, a 45°C extraction temperature, and a 3 h extraction time. Under these extraction conditions, oleoresin yield was up to 3.163%. Compared to steam distillation extraction, the CTO extracted using supercritical CO₂ had more abundant components. The EC₅₀ of CTO for DPPH˙ and ABTS˙⁺ free radical scavengers was 1.54 and 1.07 mg/mL, respectively.

Seaweed Phenolics as Natural Antioxidants, Aquafeed Additives, Veterinary Treatments and Cross-Linkers for Microencapsulation

Driven by consumer demand and government policies, synthetic additives in aquafeed require substitution with sustainable and natural alternatives. Seaweeds have been shown to be a sustainable marine source of novel bioactive phenolic compounds that can be used in food, animal and aqua feeds, or microencapsulation applications. For example, phlorotannins are a structurally unique polymeric phenolic group exclusively found in brown seaweed that act through multiple antioxidant mechanisms. Seaweed phenolics show high affinities for binding proteins via covalent and non-covalent bonds and can have specific bioactivities due to their structures and associated physicochemical properties. Their ability to act as protein cross-linkers means they can be used to enhance the rheological and mechanical properties of food-grade delivery systems, such as microencapsulation, which is a new area of investigation illustrating the versatility of seaweed phenolics. Here we review how seaweed phenolics can be used in a range of applications, with reference to their bioactivity and structural properties.

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO2 co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO2 co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO2 co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by β-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO2 co-solvent then ultrasound and ethanolic extraction methods. SCF-CO2 co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC50 value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO2 co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO2 method was finally found to be superior and could be used in large-scale processing.

Methodological Optimization of Supercritical Fluid Extraction of Valuable Bioactive Compounds from the Acidophilic Microalga Coccomyxa onubensis

Microalgae grow in diverse environments and possess a great biotechnological potential as they contain useful bioactive compounds. These bioactive compounds can be obtained by selective and energy-efficient extraction methods. Various industries are using the supercritical fluid extraction (SFE) method to extract these valuable bioactive compounds. Hence, for the first time, we evaluated the effects of SFE on the recovery of bioactive and antioxidant compounds using Coccomyxa onubensis, a eukaryotic acidophilic microalga of potential relevance which can be used in the field of nutraceutical and functional foods. It was isolated from the Tinto River (Pyritic Belt, Huelva, Spain), a mining region in Spain. Variables such as extraction yield, lutein purity (LP) and recovery (LR), total phenols, and antioxidant capacity (Trolox equivalents antioxidant capacity method) were studied using a Box–Behnken design based on a response surface methodology along with the overall extraction curve fitted to a spline linear model. The effects of temperature (30, 50, and 70 °C), pressure (25, 40, and 55 MPa), and the percentage of co-solvent (0, 25%, and 50% v/v ethanol) on SFE were analyzed, resulting in the co-solvent and temperature as the most significant factors followed by the pressure. Under 70 °C, 40 MPa, and 50% v/v ethanol, C. onubensis reached a maximum of 66.98% of LR. The extracts were richest in total phenols and showed the maximum antioxidant activity (36.08 mg GAEs/g extracts and 2.237 mmol TE/g extracts, respectively) under similar pressure and co-solvent percentage values and different temperatures (30 and 70 °C, respectively). The extracts obtained in this study may have potential applications in the food, nutraceutical, and cosmetic industries. SFE is a highly efficient method to valorize microorganisms living in extreme environments, which are so far unexplored using green extraction methods.

Subcritical Water Hydrolysis of Comb Pen Shell (Atrina pectinata) Edible Parts to Produce High-Value Amino Acid Products

Artina pectinata (Comb pen shell, CPS) is a high-protein source that contains a variety of essential amino acids. Subcritical water hydrolysis (SWH) was used to recover amino acids from the posterior adductor muscle (PAM), anterior adductor muscle (ADM), and mantle. The temperatures ranged from 120 °C to 200 °C, and the pressure and time of hydrolysis were 3 MPa and 30 min, respectively. Further characterization of the hydrolysates was performed to ascertain amino acid profiles and biofunctional properties. The hydrolysates contained more free amino acids than the untreated samples. Antioxidant activity of treated samples increased as SW temperatures increased. At 200 °C, those inhibiting ACE had a maximum antihypertensive activity of 200 °C in 1% PAM, ADM, and mantle with 85.85 ± 0.67, 84.55 ± 0.18, and 82.15 ± 0.85%, respectively, compared to 97.57 ± 0.67% in 1% standard captopril. Perhaps the most significant finding was the predominance of taurine in the three parts following SW treatment at 120 °C. The hydrolysates may be of considerable interest for use in food or energy drinks. SWH demonstrates efficacy in recovering amino acids, particularly taurine, from edible parts of A. pectinata.

Super-critical fluid extract of Bryonopsis laciniosa (Shivlingi) seeds restores fertility in zebrafish models through revival of cytological and anatomical features

Background

The Ayurvedic system of medicine mentions the use of seeds of Bryonopsis laciniosa (L.) Naud. (also known as Shivlingi due to their unique structure resembling a ‘Shivling’) for treating sexual dysfunction, impaired fertility, and as a general virility-booster in both males and females. To investigate the scientific basis for such claims, the current study was designed for the chemical characterization of the super critical fluid extracted Shivlingi seed oil (SLSO), and subsequent evaluation of its reproductive fecundity in the zebrafish model of N-ethyl-N-nitrosourea induced infertility.

Results

Linoleic and linolenic acids were the major fatty acids in the SLSO, with trace amounts of β-sitosterol and stigmasterol. Both male and female zebrafish, when fed orally with the SLSO infused pallets, showed a dose-dependent increase in fertility and fecundity rates. Microscopic observations revealed recovery in the gross ovarian anatomy and consequential improvement in egg production in infertile female zebrafish. Similarly, cytological studies exhibited increased sperm counts and motility in male zebrafish. SLSO exhibited effects similar to the human equivalent dose of Letrozole.

Conclusion

Taken together, these observations demonstrated the fertility-boosting potentials of SLSO comparable to the widely used infertility drugs. As a whole, this research work has provided scientific evidence for the rationale behind the use of Shivlingi seeds in Ayurvedic treatment for infertility in humans. Finally, but importantly, this study warrants further scientific investigations into different aspects of SLSO on human reproductive health.

Hop (Humulus lupulus L.) Essential Oils and Xanthohumol Derived from Extraction Process Using Solvents of Different Polarity

This study evaluates the content of essential oils (EOs) and prenylated flavonoid Xanthohumol (XN) in extracts of Slovenian hops, cultivar Aurora, obtained by using fluids of different polarity. It is a continuation of our previous work, investigating the extraction of bitter acids from hops. Extraction was conducted semi-continuously, using sub- and supercritical fluids of different polarity, i.e., carbon dioxide (CO2) and propane as non-polar and dimethyl ether (DME) as the polar solvent. The experiments explored a temperature range between 20 °C and 80 °C and pressures ranging from 50 bar to 150 bar. The content of XN in extracts was analysed using high-performance liquid chromatography and experiments demonstrated the largest concentration of XN was obtained using DME. In order to analyse the EO components in extracts, connected with a distinct odour, the steam distillation of extracts was performed and GC analysis was employed. Hop oil derived from CO2 extracts at specific conditions, had the highest relative concentration of linalool, β-caryophyllene and α-humulene, and oil derived from propane extracts had the highest content of all other five selected components (myrcene, geraniol, farnesene, α-selinene and δ-cadinene). The relative content of the investigated EO components in DME extracts was similar to that in propane extracts.

Challenges and solutions of extracting value-added ingredients from fruit and vegetable by-products: a review

Every year, huge amounts of fruit and vegetable by-products in the food processing factories are produced. These by-products have great potential to be used for different targets especially the extraction of value-added ingredients. The target of this study is to review the challenges of extraction of value-added ingredients from fruit and vegetable by-products on the industrial scale and to describe current trends in solving these problems. In addition, some strategies such as multi-component extraction as well as application of fermentation before or after the extraction process, and production of biofuel, organic fertilizers, animal feeds, etc. on final residues after extraction of value-added ingredients are discussed in this review paper. In fact, simultaneous extraction of different value-added ingredients from fruit and vegetable by-products can increase the extraction efficiency and reduce the cost of value-added ingredients as well as the final volume of these by-products. After extraction of value-added ingredients, the residues can be used to produce biofuels, or they can be used to produce organic fertilizers, animal feeds, etc. Therefore, the application of several appropriate strategies to treat the fruit and vegetable by-products can increase their application, protect the environment, and improve the food economy.

The Response Surface Optimization of Supercritical CO2 Modified with Ethanol Extraction of p-Anisic Acid from Acacia mearnsii Flowers and Mathematical Modeling of the Mass Transfer

A widely disseminated native species from Australia, Acacia mearnsii, which is mainly cultivated in Brazil and South Africa, represents a rich source of natural tannins used in the tanning process. Many flowers of the Acacia species are used as sources of compounds of interest for the cosmetic industry, such as phenolic compounds. In this study, supercritical fluid extraction was used to obtain non-volatile compounds from A. mearnsii flowers for the first time. The extract showed antimicrobial activity and the presence of p-anisic acid, a substance with industrial and pharmaceutical applications. The fractionation of the extract was performed using a chromatographic column and the fraction containing p-anisic acid presented better minimum inhibitory concentration (MIC) results than the crude extract. Thus, the extraction process was optimized to maximize the p-anisic acid extraction. The response surface methodology and the Box–Behnken design was used to evaluate the pressure, temperature, the cosolvent, and the influence of the particle size on the extraction process. After the optimization process, the p-anisic acid yield was 2.51% w/w and the extraction curve was plotted as a function of time. The simulation of the extraction process was performed using the three models available in the literature.

Alternative Extraction and Downstream Purification Processes for Anthocyanins

Anthocyanins are natural pigments displaying different attractive colors ranging from red, violet, to blue. These pigments present health benefits that increased their use in food, nutraceuticals, and the cosmetic industry. However, anthocyanins are mainly extracted through conventional methods that are time-consuming and involve the use of organic solvents. Moreover, the chemical diversity of the obtained complex extracts make the downstream purification step challenging. Therefore, the growing demand of these high-value pigments has stimulated the interest in designing new, safe, cost-effective, and tunable strategies for their extraction and purification. The current review focuses on the potential application of compressed fluid-based (such as subcritical and supercritical fluid extraction and pressurized liquid extraction) and deep eutectic solvents-based extraction methods for the recovery of anthocyanins. In addition, an updated review of the application of counter-current chromatography for anthocyanins purification is provided as a faster and cost-effective alternative to preparative-scale HPLC.

Intensified green-based extraction process as a circular economy approach to recover bioactive compounds from soursop seeds (Annona muricata L.)

•

SFE and SWE in single or combined mode allow extraction of value-added compounds.

•

SFE modifies the cell wall, and the oil fraction is rich in fatty acids.

•

PCA is used to correlate phenolic compounds with extraction methods.

•

Vanillic acid is the major phenolic compound quantified in all extracts.

•

First report of detection of 29 new phenolic compounds from soursop seed extracts.

Soursop (Annona muricata L.) seeds, which is a residue obtained from juice agro-industries, were subjected to supercritical fluid extraction (SFE) and subcritical water extraction (SWE) in single or combined mode to extract the potential value-added compounds. Different extraction methods were evaluated in terms of the extraction yield, phenolics content, antioxidant activity (DPPH, ABTS, and FRAP), and Maillard reaction products. The extracts were analyzed using SEM, GC-MS, and LC-MS/MS techniques. The temperature and a combination of high-pressure techniques positively affected the overall results (SFE + SWE), affording nonpolar and polar extracts rich in phenolics and antioxidant compounds. SEM analysis showed that the use of SFE caused modifications in the cell wall, and the oil fraction was rich in fatty acids. Twenty-nine compounds associated with soursop seed extracts were detected for the first time using LC-MS/MS, showing the potential of the raw material as well as promoting resource re-utilization in circular economy.