Extraction of Polyphenols from Red Grape Pomace Assisted by Pulsed Ohmic Heating

Extraction of phenolic compounds from grape pomace using ohmic heating: Chemical composition, bioactivity and bioaccessibility

This study addresses the effectiveness of ohmic heating technology (OH) for the sustainable recovery of phenolic compounds from Grape Pomace (GP) by hydroethanolic extraction. GP extracts biological potential was evaluated in terms of antioxidant activity, cytotoxicity and preventive effect against reactive oxygen species (ROS). To understand if GP extracts can be used as a functional ingredient, simulated gastrointestinal digestion was performed to evaluate the bioaccessibility. OH-assisted hydroethanolic extraction proved to be an effective process for the recovery of GP phenolic compounds with high antioxidant capacity. The digestion process increased the concentration of total phenolics and the biotransformation of high-molecular phenolics (anthocyanins, flavonoids and resveratrol) in simpler phenolic acids, improving bioaccessibility. GP extract displayed a selective action against cancer cells (Caco-2 and HeLa) and promoted ROS prevention. The results highlighted the ability of OH to extract bioactives from GP and its potential application as a nutraceutical or for functional food formulations.

Impact of thermal processing on dietary flavonoids

Flavonoids are a class of polyphenols which are widely distributed in natural products and foods. They have diverse bioactivities, including anti-inflammatory, anti-aging, and antioxidant activities. Generally, the foods rich in flavonoids are usually consumed after thermal processing. However, thermal stability of flavonoids is usually low, and thermal processing could cause either positive or negative influences on their stability and bioactivities. In this review, the effects of thermal processing on thermal stability and bioactivity of dietary flavonoids from different food sources are summarized. Then, strategies to improve thermal stability of dietary flavonoids are discussed and the effect of some promising thermal technologies are also preliminary clarified. The promising thermal technologies may be alternative to conventional thermal processing technologies.

Background and Perspectives on the Utilization of Canes' and Bunch Stems' Residues from Wine Industry as Sources of Bioactive Phenolic Compounds

Viticulture activity produces a significant amount of grapevine woody byproducts, such as bunch stems and canes, which constitute potential sources of a wide range of phenolic compounds (PCs) with purported applications. Recently, the study of these byproducts has been increased as a source of health-promoting phytochemicals. Antioxidant, antimicrobial, antifungal, and antiaging properties have been reported, with most of these effects being linked to the high content of PCs with antioxidant properties. This Review summarizes the data related to the qualitative and quantitative composition of PCs recovered from canes and bunch stems side streams of the wine industry, the influence that the different environmental and storage conditions have on the final concentration of PCs, and the current reported applications in specific technological fields. The objective is to give a complete valuation of the key factors to consider, starting from the field to the final extracts, to attain the most suitable and stable characterized product.

Valorization of cocoa, tea and coffee processing by-products-wastes

The growing threat of food insecurity together with some challenges in demography, health, malnutrition, and income instability around the globe has led researchers to take sustainable solutions to ensure secure production and distribution of food. The last decades have been remarkable in the agri-food supply chain for many food industries. However, vast quantities of food by-products and wastes are generated each year. These products are generally disposed in the environment, which could have remarkable adverse effects on the environment and biodiversity. However, they contain significant quantities of bioactive, nutritional, antioxidative, and aroma compounds. Their sustainable use could meet the increased demand for value-added pharmaceutical, nutraceutical, and food products. The amount of agri-food wastes and their disposal in the environment are predicted to double in the next decade. The valorization of these by-products could effectively contribute to the manufacture of cheaper functional food ingredients and supplements while improving regional economy and food security and mitigating environmental pollution. The main aim of this chapter is to present an understanding of the valorization of the wastes and by-products from cacao, coffee and tea processing with a focus on their bioactive, nutritional, and antioxidant capacity.

Tuning water chemistry for the recovery of greener products: pragmatic and sustainable approaches

The environmental impact and denaturing propensity of organic solvents in the extraction of plant bioactives pose great challenges in extraction systems. As a result, proactive consideration of procedures and evidence for tuning water properties for better recovery and positive influence on the green synthesis of products become pivotal. The conventional maceration approach takes a longer duration (1-72 h) for product recovery while percolation, distillation, and Soxhlet extractions take about 1 to 6 h. An intensified modern hydro-extraction process was identified for tuning water properties with an appreciable yield similar to organic solvents within 10-15 min. The percentage yield of tuned hydro-solvents achieved close to 90% recovery of active metabolites. The additional advantage of using tuned water over organic solvents is in the preservation of the bio-activities and forestalling the possibility of contamination of the bio-matrices during extractions with an organic solvent. This advantage is based on the fast extraction rate and selectivity of the tuned solvent when compared to the traditional approach. This review uniquely approaches the study of biometabolite recovery through insights from the chemistry of water under different extraction techniques for the very first time. Current challenges and prospects from the study are further presented.

Innovation and Winemaking By-Product Valorization: An Ohmic Heating Approach

The by-products of the winemaking process can represent chances for the development of new products. This study focused on the “zero waste” strategy development for by-products generated within winemaking from white and red grape varieties cultivated in the north of Portugal. The phytochemical properties of by-products were identified and characterized. Ohmic heating (OH) as a green extraction method was also applied to grape pomace due to their unknown effects on centesimal and phytochemical compositions. Both protein and carbohydrates were shown to be higher in grape bagasse than in stems. Additionally, red bagasse is richer in bioactive compounds (BC) than white bagasse. The sugar content was 21.91 and 11.01 g/100 g of DW in red and white grape bagasse, respectively. The amount of protein was 12.46 g/100 g of DW for red grape bagasse and 13.18 g/100 g of DW for white. Regarding the extraction methods, two fractions were obtained, a liquid fraction and solid (the remainder after the methodology application). OH presented a higher antioxidant capacity than a conventional (CONV) method. In addition, both extracts presented similar contents of anthocyanins, e.g., delphinidin-3-O-glucoside, petunidin-3-O-glucoside, and peonidin-3-O-glucoside. The solid fraction presented higher amounts of protein and phenols bound to fiber than CONV, which allows its use as a functional ingredient. In conclusion, OH can be an alternative extraction method compared with CONV methods, avoiding non-food grade solvents, thus contributing to circular economy implementation.

Microwave-Vacuum Extraction Technique as a Green and Clean Label Technology: Kinetics, Efficiency Analysis, and Effect on Bioactive Compounds

Grape pomace is a rich source of bioactive compounds and dietary fiber. This study aims to valorize the grape pomace by microwave-vacuum-assisted drying and extraction, which is a novel, green, and clean label technology. The drying and extraction of bioactive compounds from the grape pomace was optimized using response surface methodology. Box-Behnken design was used for three process variables, i.e., time, power, and vacuum levels. The highest drying rate was observed (5.53 g/100 g min after 10 min of drying) at the combination of 80 W and 20 inHg. This combination significantly reduced the drying time (25%) and resulted in the highest yield (64.5%) of bioactive compounds. Equally, changes in moisture ratio behavior were rapid under these processing conditions. Furthermore, Midilli model (R2 = 0.999, RMSE = 0.002, SSE = 3.71 × 10−6) was the best to justify the fitness of experimental values with predicted values. In addition, the diffusion coefficient, activation energy, and extraction yield were increased with increase in power and pressure. The concentration of bioactive components was higher in dried pomace compared to the extract. The extraction was successfully achieved without the use of solvent and the characteristics of extracted phenolics remained unaltered. Based on these findings, the microwave-vacuum-assisted drying and extraction process can be claimed as a sustainable approach.

The recovery from agro-industrial wastes provides different profiles of anti-inflammatory polyphenols for tailored applications

Food and agro-industrial processing produce a great amount of side-stream and waste materials that are excellent sources of functional bioactive molecules such as phenolic compounds that recover them can be beneficial not only for food sustainability but also to human for many industrial applications such as flavor compounds and therapeutic applications such as antimicrobial and anti-inflammatory. The treatments and extraction techniques have major effects on the recovery of bioactive compounds. Along with the conventional extraction methods, numerous innovative techniques have been evolved and have been optimized to facilitate bioactive extraction more efficiently and sustainably. In this work, we have summarized the state-of-the-art technological approaches concerning novel extraction methods applied for five most produced crops in Italy; Grape Pomace (GP), Tomato Pomace (TP), Olive Pomace (OP), Citrus Pomace (CP), and Spent Coffee Grounds (SCG), presenting the extraction yield and the main class of phenolic classes, with the focus on their biological activity as an anti-inflammatory in vitro and in vivo studies via describing their molecular mechanism of action.

Revitalizing Unfermented Cabernet Sauvignon Pomace Using an Eco-Friendly, Two-Stage Countercurrent Process: Role of pH on the Extractability of Bioactive Phenolics

As the major byproduct of the winemaking industry, grape pomace remains an untapped source of valuable bioactive phenolic compounds. This study elucidated the optimal aqueous extraction parameters for maximizing phenolic extractability, while avoiding the use of harsh conventional solvents and limiting water usage, from Cabernet Sauvignon grape pomace in which the red grape was processed for white wine. In the single-stage aqueous extraction process (AEP), the concurrent impact of pH (2.64–9.36), solids-to-liquid ratio (SLR, g pomace/mL water) (1:50–1:5), and temperature (41.6–58.4 °C) on the total phenolic content (TPC) of Cabernet Sauvignon pomace was evaluated alongside a kinetic study (15–90 min). Optimal single-stage extraction conditions (pH 9.36, 1:50 SLR, 50 °C, 75 min) guided the development of a two-stage countercurrent extraction process (pH 9.36, 1:10 SLR, 50 °C, 75 min) to further reduce water consumption without compromising overall extractability. The countercurrent process reduced fresh water usage by 80%, increased the TPC of the extracts by 18%, and improved the in vitro antioxidant activities (ABTS and ORAC) of the extracts. Untargeted metabolomics enabled the identification of a diverse pool of phenolics, especially flavonol glycosides, associated with grape pomace, while further phenolic quantitation detected improvements in the release of commonly bound phenolics such as ferulic acid, p-coumaric acid, syringic acid, and protocatechuic acid in alkaline extracts compared to the ethanolic extract. This investigation provides an efficient, eco-friendly extraction strategy suitable for applications in functional food, beverage, nutraceutical, and cosmetic industries.

Evaluation of Pulsed Electric Field-Assisted Extraction on the Microstructure and Recovery of Nutrients and Bioactive Compounds from Mushroom (Agaricus bisporus)

Pulsed electric field (PEF) is a sustainable innovative technology that allows for the recovery of nutrients and bioactive compounds from vegetable matrices. A. bisporus was chosen for its nutritional value and the effect of PEF pretreatment was evaluated using different conditions of electric field (2–3 kV/cm), specific energy (50–200 kJ/kg) and extraction time (0–6 h) to obtain the best conditions for nutrient and bioactive compound extraction. Spectrophotometric methods were used to evaluate the different compounds, along with an analysis of mineral content by inductively coupled plasma mass spectrometry (ICP-MS) and the surface was evaluated using scanning electron microscopy (SEM). In addition, the results were compared with those obtained by conventional extraction (under constant shaking without PEF pretreatment). After evaluating the extractions, the best extraction conditions were 2.5 kV/cm, 50 kJ/kg and 6 h which showed that PEF extraction increased the recovery of total phenolic compounds in 96.86%, carbohydrates in 105.28%, proteins in 11.29%, and minerals such as P, Mg, Fe and Se. These results indicate that PEF pretreatment is a promising sustainable technology to improve the extraction of compounds and minerals from mushrooms showing microporation on the surface, positioning them as a source of compounds of great nutritional interest.

Food Industry Byproducts as Starting Material for Innovative, Green Feed Formulation: A Sustainable Alternative for Poultry Feeding

Rising global populations and enhanced standards of living in so-called developing countries have led to an increased demand of food, in particular meat, worldwide. While increasing the production of broiler meat could be a potential solution to this problem, broiler meat is plagued by health concerns, such as the development of antimicrobial resistance and lower meat quality. For this reason, the supplementation of poultry feed with vitamins and antioxidant compounds, such as polyphenols, has become an attractive prospect for research in this sector. Such supplements could be obtained by extraction of agricultural byproducts (in particular, grape pomaces and artichoke leaves and bracts), thus contributing to reductions in the total amount of waste biomass produced by the agricultural industry. In this review, the effects of poultry feed supplementation with bioactive extracts from grape pomace (skins and/or seeds), as well as extracts from artichoke leaves and bracts, were explored. Moreover, the various methods that have been employed to obtain extracts from these and other agricultural byproducts were listed and described, with a particular focus on novel, eco-friendly extraction methods (using, for example, innovative and biocompatible solvents like Deep Eutectic Solvents (DESs)) that could reduce the costs and energy consumption of these procedures, with similar or higher yields compared to standard methods.

Effect of Ohmic Heating on the Extraction Yield, Polyphenol Content and Antioxidant Activity of Olive Mill Leaves

This study examined the influence of ohmic heating (OH), compared to the conventional heating (Conven) and Control (solvent) methods, on the extraction of olive mill leaves. The main extraction parameters were: (i) solvent ratio (aqueous ethanol; 40%, 60%, and 80%, v/v), and (ii) extraction temperature; 45 °C, 55 °C, and 75 °C (for OH and Conven), and room temperature (for Control). The selected response variables were extraction yield (%), total phenolic content (TPC), and antioxidant activity (ABTS and DPPH). The ohmic system, compared to Conven and Control, exhibited the greatest effects (p < 0.001) on increasing (i) extraction yield (34.53%) at 75 °C with 80% ethanol, (ii) TPC at 55 °C (42.53, 34.35, 31.63 mg GAE/g extract, with 60%, 40%, and 80% ethanol, respectively), and (iii) antioxidant potency at 75 °C detected by DPPH and ABTS, in the range of 1.21–1.04 mM TE/g, and 0.62–0.48 mM TE/g extract, respectively. Further, there were relatively similar trends in TPC and antioxidant activity (both methods), regardless of solvent ratios, p < 0.001. These findings demonstrate the potential of ohmic heating, as a green processing tool, for efficient extraction (15 min) of olive leaves. To date, no literature has described ohmic application for olive leave extraction.

Chemometric Optimization of Biologically Active Compounds Extraction from Grape Marc: Composition and Antimicrobial Activity

The article focuses on the optimization of the extraction process of biologically active compounds (BAC) from grape marc—a by-product of the wine industry. The influence of temperature, specifically 30 °C, 45 °C and 65 °C, and ethanol concentration in solutions, specifically 0–96% (v/v) on the extraction yield of polyphenols, flavonoids, tannins and anthocyanins, were investigated. The composition of individual polyphenols, anthocyanins and organic acids, antioxidant activity (DPPH and ABTS) and CIELab chromatic characteristics of the grape marc extracts (GME), were characterized. The microbiostatic and microbicidal effects in direct contact of GME with pathogenic microorganisms, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, were determined in vitro. The influence of extraction parameters on the total polyphenol content (TPC), total flavonoid content (TFC), tannin content (TC), total anthocyanin content (TAC) and their interdependencies were studied using information analysis. A mathematical model was developed on cubic spline functions. The analysis of individual compounds showed the presence of a wide range of flavonoids (procyanidin B2, procyanidin B1, hyperoside and quercetin), flavones (catechin), hydroxybenzoic acid derivatives (gallic, protocatechuic, p-hydroxybenzoic acids, m-hydroxybenzoic acid, syringic acid), hydroxycinic acid derivatives and ferulic acid methyl ester. The malvidol-3-glucoside was the main anthocyanin identified in the extract. A high amount of tartaric acid was also found. GME showed significant antimicrobial activity against Gram-positive bacteria and lower activity against Gram-negative bacteria.

Recovery of Polyphenols from Agri-Food By-Products: The Olive Oil and Winery Industries Cases

The production of olive oil and wine are two of the main agri-food economic activities in Southern Europe. They generate large amounts of solid and liquid wastes (e.g., olive pomace, olive mill wastewater, grape pomace, grape stems, wine lees, and wine processing wastewater) that represent a major environmental problem. Consequently, the management of these residues has become a big challenge for these industries, since they are harmful to the environment but rich in bioactive compounds, such as polyphenols. In recent years, the recovery of phenolic compounds has been proposed as a smart strategy for the valorization of these by-products, from a circular economy perspective. This review aims to provide a comprehensive description of the state of the art of techniques available for the analysis, extraction, and purification of polyphenols from the olive mill and winery residues. Thus, the integration and implementation of these techniques could provide a sustainable solution to the olive oil and winery sectors.

Influence of the extraction method on the recovery of bioactive phenolic compounds from food industry by-products

Agro-foodindustries generate colossal amounts of non-edible waste and by-products, easily accessible as raw materials for up-cycling active phytochemicals. Phenolic compounds are particularly relevant in this field given their abundance in plant residues and the market interest of their functionalities (e.g. natural antioxidant activity) as part of nutraceutical, cosmetological and biomedical formulations. In "bench-to-bedside" achievements, sample extraction is essential because valorization benefits from matrix desorption and solubilization of targeted phytocompounds. Specifically, the composition and polarity of the extractant, the optimal sample particle size and sample:solvent ratio, as well as pH, pressure and temperature are strategic for the release and stability of mobilized species. On the other hand, current green chemistry environmental rules require extraction approaches that eliminate polluting consumables and reduce energy needs. Thus, the following pages provide an update on advanced technologies for the sustainable and efficient recovery of phenolics from plant matrices.

Recent advances in extraction technologies for recovery of bioactive compounds derived from fruit and vegetable waste peels: A review

Fruits and vegetables are the most important commodities of trade value among horticultural produce. They are utilized as raw or processed, owing to the presence of health-promoting components. Significant quantities of waste are produced during fruits and vegetables processing that are majorly accounted by waste peels (∼90-92%). These wastes, however, are usually exceptionally abundant in bioactive molecules. Retrieving these valuable compounds is a core objective for the valorization of waste peel, besides making them a prevailing source of beneficial additives in food and pharmaceutical industry. The current review is focused on extraction of bioactive compounds derived from fruit and vegetable waste peels and highlights the supreme attractive conventional and non-conventional extraction techniques, such as microwave-assisted, ultrasound assisted, pulsed electric fields, pulsed ohmic heating, pressurized liquid extraction, supercritical fluid extraction, pressurized hot water, high hydrostatic pressure, dielectric barrier discharge plasma extraction, enzyme-assisted extraction and the application of "green" solvents say as well as their synergistic effects that have been applied to recover bioactive from waste peels. Superior yields achieved with non-conventional technologies were identified to be of chief interest, considering direct positive economic consequences. This review also emphasizes leveraging efficient, modern extraction technologies for valorizing abundantly available low-cost waste peel, to achieve economical substitutes, whilst safeguarding the environment and building a circular economy. It is supposed that the findings discussed though this review might be a valuable tool for fruit and vegetable processing industry to imply an economical and effectual sustainable extraction methods, converting waste peel by-product to a high added value functional product.

Recovery of Anthocyanins and Monosaccharides from Grape Marc Extract by Nanofiltration Membranes

Wastewaters and by-products generated in the winemaking process are important and inexpensive sources of value-added compounds that can be potentially reused for the development of new products of commercial interest (i.e., functional foods). This research was undertaken in order to evaluate the potential of nanofiltration (NF) membranes in the recovery of anthocyanins and monosaccharides from a clarified Carménère grape marc obtained through a combination of ultrasound-assisted extraction and microfiltration. Three different flat-sheet nanofiltration (NF) membranes, covering the range of molecular weight cut-off (MWCO) from 150 to 800 Da, were evaluated for their productivity as well as for their rejection towards anthocyanins (malvidin-3-O-glucoside, malvidin 3-(acetyl)-glucoside, and malvidin 3-(coumaroyl)-glucoside) and sugars (glucose and fructose) in selected operating conditions. The selected membranes showed differences in their performance in terms of permeate flux and rejection of target compounds. The NFX membrane, with the lowest MWCO (150–300 Da), showed a lower flux decay in comparison to the other investigated membranes. All the membranes showed rejection higher than 99.42% for the quantified anthocyanins. Regarding sugars rejection, the NFX membrane showed the highest rejection for glucose and fructose (100 and 92.60%, respectively), whereas the NFW membrane (MWCO 300–500 Da) was the one with the lowest rejection for these compounds (80.57 and 71.62%, respectively). As a general trend, the tested membranes did not show a preferential rejection of anthocyanins over sugars. Therefore, all tested membranes were suitable for concentration purposes.

Technological Applications of Natural Colorants in Food Systems: A Review

Natural colorants have emerged as an alternative to their synthetic counterparts due to an existing health concern of these later. Moreover, natural-food colorants are a renewable option providing health benefits and interesting technological and sensory attributes to the food systems containing them. Several sources of natural colorants have been explored aiming to deliver the required wide color range demanded by consumers. This review aimed to compare and discuss the technological applications of the main natural-food colorants into food system in the last six years, giving additional information about their extraction process. Although natural colorants are promising choices to replace synthetic ones, optimization of processing conditions, research on new sources, and new formulations to ensure stability are required to equate their properties to their synthetic counterparts.

Emerging techniques assisting nixtamalization products and by-products processing: an overview

The production of worldwide nixtamalized products has increased in Latin American countries over the last years. For a better maize handling and exploitation of its nutritional elements, maize is subjected to a nixtamalization pretreatment protocol, which produces meaningful chemical, nutritional and quality changes in maize and its derived products, but large amounts of its primary by-product, well-known as 'nejayote', are also produced. Importantly, nejayote is usually discarded into the urbanized sewage with minimal treatment. Today, according to the recent research reports, new emerging techniques and protocols have been implemented to improve the nixtamalization products and by-products processing. New valorization approaches and biotechnological developments (including biotransformations) toward the reuse of nejayote have been developed according to its considerable content of biomolecules. Therefore, the goal of this paper is to provide a comprehensive review of the main development works at assisting nixtamalization products and by-products processing. Herein, particular attention is paid to experimental insights dealing with the valorization of nejayote.

Inactivation Kinetics and Membrane Potential of Pathogens in Soybean Curd Subjected to Pulsed Ohmic Heating Depending on Applied Voltage and Duty Ratio

The aim of this research was to investigate the efficacy of the duty ratio and applied voltage in the inactivation of pathogens in soybean curd by pulsed ohmic heating (POH). The heating rate of soybean curd increased rapidly as the applied voltage increased, although the duty ratio did not affect the temperature profile. We supported this result by verifying that electrical conductivity increased with the applied voltage. Escherichia coli O157:H7, Salmonella enterica serovar Typhimurium, and Listeria monocytogenes in soybean curd were significantly (P < 0.05) inactivated by more than 1 log unit at 80 Vrms (root mean square voltage). To elucidate the mechanism underlying these results, the membrane potential of the pathogens was examined using DiBAC4(3) [bis-(1,3-dibutylbarbituric acid)trimethine oxonol] on the basis of a previous study showing that the electric field generated by ohmic heating affected the membrane potential of cells. The values of DiBAC4(3) accumulation increased under increasing applied voltage, and they were significantly (P < 0.05) higher at 80 Vrms, while the duty ratio had no effect. In addition, morphological analysis via transmission electron microscopy showed that electroporation and expulsion of intracellular materials were predominant at 80 Vrms Moreover, electrode corrosion was overcome by the POH technique, and the textural and color properties of soybean curd were preserved. These results substantiate the idea that the applied voltage has a profound effect on the microbial inactivation of POH as a consequence of not only the thermal effect, but also the nonthermal effect, of the electric field, whereas the duty ratio does not have such an effect.IMPORTANCE High-water-activity food products, such as soybean curd, are vulnerable to microbial contamination, which causes fatal foodborne diseases and food spoilage. Inactivating microorganisms inside food is difficult because the transfer of thermal energy is slower inside than it is outside the food. POH is an adequate sterilization technique because of its rapid and uniform heating without causing electrode corrosion. To elucidate the electrical factors associated with POH performance in the inactivation of pathogens, the effects of the applied voltage and duty ratio on POH were investigated. In this study, we verified that a high applied voltage (80 Vrms) at a duty ratio of 0.1 caused thermal and nonthermal effects on pathogens that led to an approximately 4-log-unit reduction in a significantly short time. Therefore, the results of this research corroborate database predictions of the inactivation efficiency of POH based on pathogen control strategy modeling.

Membrane separation processes for the extraction and purification of steviol glycosides: an overview

Steviol glycosides (SGs), as natural sweeteners from Stevia rebaudiana, are currently employed for replacing sugar and its derivatives in several food products and formulations. Such compounds play an essential role in human health. Their usage provides a positive effect on preventing diseases related to sugar consumption, including diabetes mellitus, cancer, and lipid metabolism disorders. The traditional extraction of SGs is performed by means of solvent extraction, which limits their application since the removal of residual solvents is a challenging task requiring further downstream purification steps. In addition, the presence of residual solvents negatively affects the quality of such compounds. Today, food technicians are looking for innovative and improved techniques for the extraction, recovery and purification of SGs. Membrane-based technologies, including microfiltration, ultrafiltration, and nanofiltration, have long been proven to be a valid alternative for efficient extraction and purification of several high added-value molecules from natural sources. Such processes and their possible coupling in integrated membrane systems have been successfully involved in recovery protocols of several compounds, such as metabolites, polyphenols, anthocyanins, natural pigments, proteins, from different sources (e.g., agro-food wastes, plant extracts, fruits, fermentation broths, among others). Herein, we aim to review the current progresses and developments about the extraction of SGs with membrane operations. Our attention has been paid to the latest insights in the field. Furthermore, key process parameters influencing the extraction and purification of SGs are also discussed in detail.

Changes in Physicochemical and Bioactive Profile of Garlic Pulp by High Voltage Electric Field

Ohmic heating is an unconventional rapid sterilizing technique for complex food fluids. In this study, garlic pulp was ohmic heated at 13.33, 20 and 26.66 V/cm and also in conventional means. The effect of high voltage electric field-induced ohmic heating for increasing the shelf-life and maintaining the quality of garlic pulp was investigated. The physicochemical properties like pH and colour were determined and microbial growth study was carried out for both the ohmic heated and conventionally heated garlic pulp throughout the storage period. During storage, the physiochemical changes were at a rapid rate in conventionally heated garlic pulp when compared with the ohmic heated pulp. Garlic pulp ohmic heated at high voltage gradient (26.66 V/cm) could extend the storage period upto 60 days without adding preservatives. Bioactive compounds were analysed using high performance liquid chromatography and found to have 8.83 µg/mL, 30.28 µg/mL, 9.04 µg/mL of alliin, pyruvic acid and diallyl disulphide content, respectively in garlic pulp ohmic heated at high voltage gradient. Whereas, in conventional heating, alliin, pyruvic acid and diallyl disulphide are found to be 4.71 µg/mL, 22.97 µg/mL, 4.64 µg/mL, respectively

Comparison of different ultrasound assisted extraction techniques for pectin from tomato processing waste

Concept of waste to wealth is a hot topic with research ongoing globally to reduce carbon footprint. In an effort to follow up this cause present study focused on tomato industry waste specifically the peel of tomatoes for extraction of pectin. Pectin extraction was performed using five different extraction techniques (Ultrasound assisted extraction (UAE); microwave assisted extraction (MAE); ohmic heating assisted extraction (O_HAE); ultrasound assisted microwave extraction (UAME) and ultrasound assisted ohmic heating extraction (UAO_HE) at different power levels to study its extraction and degradation kinetics and in turn to optimize the extraction process. The extracted pectin yield ranged from 9.30% for O_HAE to 25.42% for MAE. Also, there was very less difference in the yield of MAE and UAME extracted pectin, but at the cost of major difference in degree of esterification 59.76 ± 0.70 and 73.33 ± 1.76%, respectively. In addition, all the pectin extracted under optimized conditions was having acceptable purity, [Galacturonic acid (GalA) content ranged from 675.8 ± 11.31 to 913.3 ± 20.50 g/kg of pectin]. FTIR analysis confirmed the presence of functional groups in the finger print region of identification for polysaccharide in all the extracted pectin. According to obtained results, UAME can be considered as better green extraction technology in terms of extraction yield as well as in quality of pectin compared to the other treatments used. Therefore, results suggest that UAME can be used as an efficient pectin extraction method from tomato processing waste.

Ohmic heating polyphenolic extracts from vine pruning residue with enhanced biological activity

Vine Pruning residue was submitted to conventional heating and ohmic heating (OH) for the extraction of bioactive compounds and analyzed for total phenolic content (TPC), polyphenolic profile, antioxidant activity, antimicrobial activity and anticancer activity. The OH extracts were obtained using Low electric field (496.0 V/cm) or Intermediate electric field - IEF (840.0 V/cm). The tests were performed using 45% (v/v) ethanol-water extraction solution at 80 °C at different extraction times (20-90 min). The extract that stood out among the others concerning anticancer potential was the one obtained by OH when used, IEF, where the TPC was significantly higher than in the other extracts which correlated with higher antioxidant, antimicrobial and anti-proliferative activity on different tumor cell lines (HepG2, MDA-MB-231, MCF-7 and Caco2). Vine pruning OH extracts obtained using green solvents by an eco-friendly procedure were revealed as a source of compounds with relevant antioxidant and anticancer activity.

Enhancing Thermal Stability and Bioaccesibility of Açaí Fruit Polyphenols through Electrohydrodynamic Encapsulation into Zein Electrosprayed Particles

The açaí fruit (Euterpe oleracea Mart.) is well known for its high content of antioxidant compounds, especially anthocyanins, which provide beneficial health properties. The incorporation of this fruit is limited to food products whose processing does not involve the use of high temperatures due to the low thermal stability of these functional components. The objective of this work was the encapsulation of açaí fruit antioxidants into electrosprayed zein, a heat-resistant protein, to improve their bioavailability and thermal resistance. First, the hydroalcoholic açaí extract was selected due to its high polyphenolic content and antioxidant capacities, and, subsequently, it was successfully encapsulated in electrosprayed zein particles. Scanning electron microscopy studies revealed that the resulting particles presented cavities with an average size of 924 nm. Structural characterization by Fourier transform infrared spectroscopy revealed certain chemical interaction between the active compounds and zein. Encapsulation efficiency was approximately 70%. Results demonstrated the effectiveness of the encapsulated extract on protecting polyphenolic content after high-temperature treatments, such as sterilization (121 °C) and baking (180 °C). Bioaccesibility studies also indicated an increase of polyphenols presence after in vitro digestion stages of encapsulated açaí fruit extract in contrast with the unprotected extract.

Kinetic Improvement of Bioactive Compounds Extraction from Red Grape (Vitis vinifera Moldova) Pomace by Ultrasonic Treatment

Grape pomace from a red grape variety (Vitis vinifera Moldova) cultivated in the northeastern region of Romania has been studied as a source for the extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) using ultrasonic treatment. The method of extraction described here uses two different solvents, namely 2-propanol and methanol. For each of the extraction solvents, we evaluated the singular influence and the impact of interactions between process parameters (solvent concentration, ultrasonic frequency, temperature, and extraction time) on the extraction yields of anthocyanins and phenolic compounds. Response surface methodology was implemented via a Box–Behnken design to optimize the extraction of TMA and TPC from grape pomace. According to the optimization, in order to achieve the highest yield of TPC (62.487 mg gallic acid equivalent (GAE)/g (d = 1.0)), the following conditions are necessary: solvent—2 propanol, solvent concentration 50%, temperature −50 °C and extraction time 29.6 min.

Modern pretreatment techniques for phytochemical extraction

Purpose

Modern thermal and non-thermal pretreatment techniques, namely, enzymatic treatment, gas phase plasma treatment and ohmic heating have become more pronounced over conventional techniques for enhanced coloured phytochemicals (pigments) extraction. Presently, numbers of pretreatment techniques are available with some unique feature. It is difficult to choose best pretreatment method to be employed for phytochemicals extraction from different sources. Therefore, this paper aims to discuss different modern pretreatment techniques for extraction with their potential results over conventional techniques.

Design/methodology/approach

Research and review articles targeting to the thermal and non-thermal pretreatment techniques were collected from Google Scholar. The required information has been tabulated and discussed which included qualities of modern pretreatment techniques over conventional techniques, phytochemical extraction and best pretreatment methods for optimized results.

Findings

Every pre-treatment has its own advantages and disadvantages for a particular phytochemical and its extraction from various sources. Enzymes can be used in combinations to enhance final yield like extraction of carotenoids (pectinase, cellulase and hemicellulase) from chillies and lycopene (pectinase and cellulase) from tomato. Utilization of each method depends upon many factors such as source of pigment, cost and energy consumption. CO2 pretreatment gives good results for carotenoid extraction from algae sources. Ohmic heating can yield high anthocyanin content. Modifications in conventional blanching has reduced final waste and improvised the properties of pigment.

Originality/value

This study comprises collective information regarding modern pre-treatment for extraction over conventional pre-treatments. The study also covers future trends and certain new hybrid approaches which are still less flourished.

Enrichment of Whole Wheat Cocoa Biscuits with Encapsulated Grape Skin Extract

Grape pomace is one of the major waste products generated by the wine-making process and it contains seeds and skins still rich in bioactive compounds. Skins can be separated from the seeds and valorised for the recovery of antioxidant extracts with different potential applications. The aim of this study was to evaluate the influence of the addition of an extract obtained from waste grape skins and encapsulated in maltodextrins on the antioxidant properties and sensory acceptability of whole wheat cocoa biscuits. Different levels of enrichment (1.2, 2.3, and 3.5% on dough weight) were tested, and the obtained doughs and biscuits were analysed for total phenols content and antioxidant capacity (based on different radical assays). Extract addition increased the phenolic content (up to 134% increase) and antioxidant capacity (up to 244%) of both doughs and biscuits. Extract containing biscuits were also characterised by a different colour. However, oxidation stability, evaluated at accelerated temperature and oxygen conditions, was not improved by the extract incorporation. Cooking led to an average (not always significant) 16% decrease in phenolic content for both enriched and reference recipes. The enrichment level significantly influenced the sensory acceptability, with identification of two clusters of consumers, with one cluster preferring the biscuits with the highest enrichment level and one cluster preferring the biscuits with the lowest level. The results showed that whole wheat cacao biscuits represent an appropriate food matrix to develop pleasant novel products enriched in phenolic compounds from waste grape skins and likeable for regular biscuits consumers.

Changes on the phytochemicals profile of instant corn flours obtained by traditional nixtamalization and ohmic heating process

We studied the changes in the phytochemicals profile of two instant corn flours produced by different process: traditional nixtamalization process (TN) and by ohmic heating process (OH). The highest total phenolics content was found in the OH flours (OHF), which showed predominance of bound phenolics and free flavonoids compared with the TN flours (TNF). Ferulic acid measured by HPLC-DAD was the most abundant compound in its bound form in the OHF, but decreased by 57% in TNF. The insoluble fiber content was preserved by the OHF (17.49%) and the soluble fiber increased ∼65% compared with TNF. These data suggest that instant corn flours processed by OH preserves the phenolic profile and antioxidant profile similarly than flours processed by TN; furthermore, water waste was reduced significantly, and no effluents were produced in the ohmic heating process.