Effects of Dielectric Barrier Discharges (DBD) Cold Plasma Treatment on Physicochemical and Structural Properties of Zein Powders

The casein in sheep milk processed by cold plasma technology: Phosphorylation degree, functional properties, oxidation characteristics, and structure

Cold plasma is a nonthermal process used for modification of proteins. The objective of this study was to investigate the effect of cold plasma technology on the phosphorylation degree, functional and oxidation properties, and structure of casein in sheep milk. Cold plasma treatment for 3-4 min significantly increased the phosphorylation degree and enhanced functional properties, including water-holding capacity, solubility, foaming capacity and stability. Besides, plasma treatment time profoundly influenced protein oxidation, and treatment for 2 and 3 min could be the preferred conditions to minimize protein change. The protein conformation became unstable with the extension of treatment time. Particle size, polymer dispersity index, and microscopy images confirmed alterations in the protein structure following 3 min of processing. Consequently, using cold plasma treatment at 10 kHz 20 kV for 3 min could be suggested for milk protein modification, providing a basis for the application of high-quality caseins in food processing.

The effect of polysaccharide type on dielectric barrier discharge (DBD) plasma glycosylation of sodium caseinate-part I: Physicochemical, structural and thermal properties

This study aimed to investigate the impact of polysaccharide type on the physicochemical, structural, and thermal properties of dielectric barrier discharge (DBD) plasma glycosylated sodium caseinate (SC). The polysaccharides Quince seed gum (QSG), carboxymethyl cellulose (CMC), and maltodextrin (MD) were mixed with SC and treated with DBD plasma at 18 kV for 10 min. The grafting degree, electrophoresis pattern, FTIR, XRD, carbonyl, sulfhydryl, and di-tyrosine content, FE-SEM, color, and thermal properties of SC and its polysaccharide mixtures before and after plasma treatment were analyzed. Results showed that the SC-QSG conjugate had the highest glycation degree and color change after plasma treatment. The SC-CMC and SC-QSG conjugates exhibited disappearance of distinct SC bands in electrophoresis pattern compared to SC. Also, significant changes in functional group and crystallinity were occurred in SC-CMC conjugate. Plasma treatment caused oxidation of SC, but the presence of polysaccharides offered protection against oxidation. The microstructure of SC was altered by mixing with polysaccharides and exposure to plasma. Also, the mixtures indicated higher thermal stability after plasma treatment. Results confirmed that the generation of protein-polysaccharide conjugates through DBD plasma technique was depended on with SC-MD conjugate unable to form through this method.

Influence of process conditions of alkalization on quality of cocoa powder

In this study, the effects of independent variables such as alkaline (NaOH) salt concentration (3.0-6.0 g/100 mL), alkalization temperature (60-90 °C), and time (20-40 min) on cocoa powder (low-fat) properties were investigated by using Central Composite Design. The physicochemical and color properties of samples, powder characteristics, volatile component profile, total polyphenol content (TPC), as well as antioxidant activity potentials using different methods (DPPH and ABTS) were determined. Significant models were identified for the effects on major alkalization indicators (L*, a*/b*, pH), as well as TPC and antioxidant activity potential (DPPH), which are the main motivators for the preference and consumption of cocoa products (p < 0.05). The established model was validated, and their predicted values were found to be very close to real results. It was determined that the alkali concentration had a more significant effect on dependent variables, especially on alkalization indicators, compared to the other independent variables. Furthermore, strong correlations were determined between TPC and antioxidant activity potential and color properties (L*, a*, b*, and a*/b*). Optimum concentration, temperature and time were found to be 5.3 %, 84 °C and 35.7 min for maximizing a*/b* value. The establishment of such models lead to optimizing process conditions of alkalization with minimum effort and labor force for obtaining cocoa powder with desired quality depending on the usage purpose.

Effect of Intermittent Low-Pressure Radiofrequency Helium Cold Plasma Treatments on Rice Gelatinization, Fatty Acid, and Hygroscopicity

To establish the safe and reproducible effects of cold plasma (CP) technology on food products, this study evaluated the gelatinization parameters, fatty acid profile, and hygroscopic properties of rice grains repeatedly treated with low-pressure radiofrequency (RF) helium CP (13.56 MHz, 140 Pa, 120 W-20s, 0-4 times, and 300 g sample). Compared with the untreated (zero times) sample, with an increase in CP treatment times from one to four on rice, the water contact angle and cooking time decreased, while the water absorption rate and freshness index increased, and the pH value remained unchanged. CP repeating treatments essentially had no effect on the gelatinization enthalpy, but significantly increased the peak temperature of gelatinization. From the pasting profile of rice that has been repeatedly CP treated, the peak, breakdown, and setback viscosities in flour paste decreased. CP repeating treatments on rice did not change the short-range molecular order of starch. Compared with the untreated sample, the first helium CP treatment maintained the content of C18:1n9c, C18:2n6c, and C18:3n3, but the second to fourth CP treatment significantly decreased contents of these fatty acids (FAs) as the C18:0 content increased. The first three CP treatments can increase the water and sucrose solvent retention capacity in rice flours. CP repeatedly treated rice first exhibits the similar monolayer water content and solid surface area of water sorption. Principal component analysis shows that contact angle, pasting parameters, and fatty acid profile in milled rice are quite sensitive to CP treatment. Results support that the effect of low-pressure RF 120W helium CP treatment 20 s on rice grains is perdurable, and the improvement of CP intermittent treatments on rice cooking and pasting properties is an added benefit, and the hygroscopic properties of rice was kept.

Improved encapsulation effect and structural properties of whey protein isolate by dielectric barrier discharge cold plasma

The whey protein isolate (WPI) was modified by dielectric barrier discharge cold plasma (DBD) in order to improve its encapsulation efficiency of rutin. In this work, the effect of DBD treatment on structure and physicochemical properties of WPI and the interaction between DBD-treated WPI and rutin were investigated. The results showed that the structural change of WPI leaded to the exposure of internal hydrophobic groups, increasing the interaction site with rutin. The encapsulation efficiency of DBD-treated WPI (30 kV, 30 s) on rutin was improved by 12.42 % compared with control group. The results of multispectral analysis showed that static quenching occurred in the process of interaction between DBD-treated and rutin, hydrogen bond and van der Waals force were the main forces between them. Therefore, DBD treatment can be used as a method to improve the encapsulation efficiency of WPI on hydrophobic active substances.

The changed structures of Cyperus esculentus protein decide its modified physicochemical characters: Effects of ball-milling, high pressure homogenization and cold plasma treatments on structural and functional properties of the protein

Three physical treatments, including ball-milling (BM), high pressure homogenization (HPH) and cold plasma (CP) were applied to modify structural and functional properties of Cyperus esculentus protein (CEP). The results showed that three treatments significantly altered morphology and reduced particle size of CEP. Both primary and secondary structures of CEP were hardly changed, while disulfide bonds and hydrophobic forces between amino acid residues of CEP were interrupted by three treatments, releasing free sulfhydryls and hydrophobic groups. With the free moiety accumulation, the reformed interactions between them enhanced the crystallinity and thermostability of CEP. Besides, solubility and emulsifying properties of CEP were significantly improved within a certain range of treatment duration and intensity, and three treatments decreased water but increased oil holding capacity of CEP. Conclusively, the modified physicochemical properties of CEP were decided by the changed molecular structures of CEP, and different treatments may satisfy different processing requirements for the protein.

Influence of atmospheric pressure plasma jet on the structural, functional and digestive properties of chickpea protein isolate

Chickpea protein (CPI) is a promising dietary protein and potential substitute for soy protein in food product development due to its high protein content and low allergenicity. However, CPI possesses denser tertiary and quaternary structures and contains certain amount of anti-nutritional factors, both of which constrain its functional properties and digestibility. The objective of this study was to assess the effectiveness of atmospheric pressure plasma jets (APPJ) as a non-thermal method for enhancing the functional characteristics and digestibility of CPI. In this study, the reactive oxygen and nitrogen species generated by the APPJ treatment led to protein oxidation and increased carbonyl and di-tyrosine contents. At the same time, the secondary, tertiary and microstructural structures of CPI were changed. The solubility, water holding capacity, fat absorption capacity, emulsifying capacity and foaming capacity of CPI were significantly improved after 30 s APPJ treatment, and a higher storage modulus in rheology was observed. Additionally, it was observed that the in vitro protein digestibility (IVPD) of APPJ-treated CPI increased significantly from 44.85 ± 0.6 % to 50.2 ± 0.59 % following in vitro simulated gastric and intestinal digestion, marking a noteworthy improvement of 11.93 %. These findings indicate that APPJ processing can enhance the functional and digestive properties of CPI through structural modification and expand its potential applications within the food industry.

Effect of Physical Modifications on Physicochemical and Functional Properties of Walnut Protein

Walnut protein is a high-quality vegetable protein with promising applications in the food industry; however, its potential is hindered by low solubility and associated properties. We utilized various physical modification techniques (cold plasma; ball milling; superfine grinding; ultrasound; wet ball milling; and high-pressure microjet) to enhance walnut proteins' physicochemical and functional properties. The changes in particle size, microstructure, surface hydrophobicity, fluorescence, solubility, foaming, and emulsification were investigated. Cold plasma and ultrasound treatments minimally affected particle size and morphology. Cold plasma increased the particle size D4,3 from 145.20 μm to 152.50 μm. Ultrasonication reduced the particle size D4,3 to 138.00 μm. The variation was within ±10 μm, while the particle size of walnut protein significantly decreased after the other four modification treatments. The greatest variation in particle size was in the superfine grinding, with the D4,3 being reduced to 23.80 μm. Ultrasound treatment converted the β-sheet into an α-helix, while the other methods transformed the α-helix into a β-sheet. The dispersion stability notably improved after wet ball milling and high-pressure microjet treatments, which was accompanied by a significant increase in solubility from 6.9% (control) to 13.6% (wet ball milling) and 31.7% (high-pressure microjet). The foaming and emulsification properties were also enhanced through these modifications (foaming improved from 47% to 55.33% and emulsification improved from 4.32 m2/g to 8.27 m2/g). High-pressure microjet treatment proved most effective at improving solubility in the functional properties of walnut protein. These findings are expected to help broaden the potential utilization of walnut protein in the food industry, including in beverages and emulsions.

Effect of atmospheric cold plasma treatment on acid gelation properties of skim milk: Rheology and textural studies

Cold plasma processing is a non-thermal food processing technique that has been shown to improve the gelling properties of plant proteins by altering their structure through oxidation and crosslinking. This study aimed to investigate the effects of cold plasma treatment on the rheological properties of skim milk under different conditions, focusing on the impact of feed gas and treatment time on skim milk's sulfhydryl content, flow properties, and acid gelling behavior. Results showed that free sulfhydryl content decreased with treatment time, with a notable reduction observed after 2 min of N2-O2 plasma treatment. Skim milk treated with N2 plasma experienced a more gradual decrease in free SH content. Cold plasma increased skim milk viscosity over time. N2-O2 plasma treatment significantly affected G'40 and G'4 storage moduli, with an increase observed after 2 min of exposure but no change beyond that time. Acid gels' greenness (a* value) decreased with increasing treatment time compared to the control. Acid gel firmness of milk treated with N2-O2 plasma for 1 min significantly increased from 1.804 N to 1.912 N, and further to 2.072 N after 2 min of treatment. However, longer exposure times led to lower firmness in gels. N2 plasma treatment also significantly impacted acid gel firmness. Syneresis in acid gels decreased from 63.4 % to 57.7 % and 58.7 % after 1 and 2 min of N2-O2 plasma treatment, respectively, but increased to about 70 % after 4 min. Acid gels made from milk treated with N2 plasma experienced considerably less syneresis. The cold plasma treatment under different conditions significantly affected the properties of skim milk, with various impacts on sulfhydryl content, flow properties, and acid gelling behavior. These findings demonstrate the potential applications of cold plasma processing in the food industry to improve product properties.

Enhanced properties of non-starch polysaccharide and protein hydrocolloids through plasma treatment: A review

Hydrocolloids are important ingredients in food formulations and their modification can lead to novel ingredients with unique functionalities beyond their nutritional value. Cold plasma is a promising technology for the modification of food biopolymers due to its non-toxic and eco-friendly nature. This review discusses the recent published studies on the effects of cold plasma treatment on non-starch hydrocolloids and their derivatives. It covers the common phenomena that occur during plasma treatment, including ionization, etching effect, surface modification, and ashing effect, and how they contribute to various changes in food biopolymers. The effects of plasma treatment on important properties such as color, crystallinity, chemical structure, rheological behavior, and thermal properties of non-starch hydrocolloids and their derivatives are also discussed. In addition, this review highlights the potential of cold plasma treatment to enhance the functionality of food biopolymers and improve the quality of food products. The mechanisms underlying the effects of plasma treatment on food biopolymers, which can be useful for future research in this area, are also discussed. Overall, this review paper presents a comprehensive overview of the current knowledge in the field of cold plasma treatment of non-starch hydrocolloids and their derivatives and highlights the areas that require further investigation.

Impact of emerging food processing technologies on structural and functional modification of proteins in plant-based meat alternatives: An updated review

In the past decade, the plant-based meat alternative industry has grown rapidly due to consumers' demand for environmental-friendly, nutritious, sustainable and humane choices. Consumers are not only concerned about the positive relationship between food consumption and health, they are also keen on the environmental sustainability. With such increased consumers' demand for meat alternatives, there is an urgent need for identification and modification of protein sources to imitate the functionality, textural, organoleptic and nutritional characteristics of traditional meat products. However, the plant proteins are not readily digestible and require more functionalization and modification are required. Proteins has to be modified to achieve high quality attributes such as solubility, gelling, emulsifying and foaming properties to make them more palatable and digestible. The protein source from the plant source in order to achieve the claims which needs more high protein digestibility and amino acid bioavailability. In order to achieve these newer emerging non-thermal technologies which can operate under mild temperature conditions can reach a balance between feasibility and reduced environmental impact maintaining the nutritional attributes and functional attributes of the proteins. This review article has discussed the mechanism of protein modification and advancements in the application of non-thermal technologies such as high pressure processing and pulsed electric field and emerging oxidation technologies (ultrasound, cold plasma, and ozone) on the structural modification of plant-based meat alternatives to improve, the techno-functional properties and palatability for successful food product development applications.

Effect of atmospheric pin-to-plate cold plasma on oat protein: Structural, chemical, and foaming characteristics

The impact of novel pin-to-plate atmospheric cold plasma was investigated with input voltage (170 V, 230 V) and exposure time (15 & 30 min) on oat protein by studying structural (FTIR, circular dichroism (CD), UV-vis, Fluorescence), morphological (particle size analysis, SEM, turbidity), chemical (pH, redox potential (ORP), ζ potential, carbonyl, sulfhydryl, surface hydrophobicity), and foaming characteristics. The plasma treatment reduced the pH while increasing the ORP of the dispersions. These ionic environment changes affected the ζ potential and particle size leading to the formation of larger aggregates (170-15; 230-15) and distorted smaller ones (170-30; 230-30) as confirmed by SEM. The FTIR spectra showed reduced intensity at specific amide bands (1600-1700 cm^-1) and also an increase in carbonyl stretching (1743 cm^-1) representing oxidative carbonylation (increase in carbonyl content). Thus, the partial exposure of hydrophobic amino acids increases surface hydrophobicity. The altered secondary structure (rise in α-helix, decrement in β-sheets and turns), and tertiary structures were observed in circular dichroism (CD) and UV absorbance and fluorescence characteristics of proteins respectively. Furthermore, the increase in free sulfhydryl content and disulfide content was highly affected by the plasma treatments due to observed protein unfolding and aggregations. Besides, the increased solubility and reduced surface tension contributed to the improved foaming characteristics. Thus, plasma processing influences protein structure affecting their characteristics and other functionalities.

pH Effect on the Structure, Rheology, and Electrospinning of Maize Zein

As a simple and convenient technology to fabricate micron-to-nanoscale fibers with controllable structure, electrostatic spinning has produced fiber films with many natural advantages, including a large specific surface area and high porosity. Maize zein, as a major storage protein in corn, showed high hydrophobicity and has been successfully applied as a promising carrier for encapsulation and controlled release in the pharmaceutical and food areas. Proteins exhibit different physical and chemical properties at different pH values, and it is worth investigating whether this change in physical and chemical properties affects the properties of electrospun fiber films. We studied the pH effects on zein solution rheology, fiber morphology, and film properties. Rotational rheometers were used to test the rheology of the solutions and establish a correlation between solution concentration and fiber morphology. The critical concentrations calculated by the cross-equation fitting model were 17.6%, 20.1%, 20.1%, 17.1%, and 19.5% (w/v) for pH 4, 5, 6, 7, and 8, respectively. The secondary structure of zein changed with the variation in solution pH. Furthermore, we analyzed the physical properties of the zein films. The contact angles of the fiber membranes prepared with different pH spinning solutions were all above 100, while zein films formed by solvent evaporation showed hydrophilic properties. The results indicated that the rheological properties of zein solutions and the surface properties of the film were affected by the pH value. This study showed that zein solutions can be stabilized to form electrospun fibers at a variety of pH levels and offered new opportunities to further enhance the encapsulation activity of zein films for bioactive materials.

Impact of dielectric barrier discharge cold plasma on the lipid oxidation, color stability, and protein structures of myoglobin-added washed pork muscle

Cold plasma has been considered a novel non-thermal processing technique and attracted a high attention by the food industry. In this study, the influences of dielectric barrier discharge cold plasma (DBD-CP) on the myoglobin (Mb)-added washed pork muscle (WPM) were evaluated. The electrophoresis pattern, autoxidation, and secondary structure of Mb were analyzed. The results found that DBD-CP caused the decrease of the redness and total sulfhydryl (T-SH) in WPM, while the increase of non-heme, peroxide value (PV), and thiobarbituric acid reactive substances (TBARS), suggested that treatment triggered protein oxidation and heme degradation. Additionally, DBD-CP treatment enhanced the autoxidation of Mb, induced the release of intact heme from the globin, rearranged the charged groups, and promoted Mb aggregation. The transformation of α-helix into the random coil of Mb demonstrated that DBD-CP weakened the tensile strength. Overall, data indicated that DBD-CP promoted autoxidation and changed the secondary structure of Mb, accelerating Mb-mediated lipid oxidation in WPM. Thus, further studies about the optimization of processing conditions by DBD-CP need to be performed.

Cold Atmospheric Plasma Triggers Apoptosis via the Unfolded Protein Response in Melanoma Cells

Cold atmospheric plasma (CAP) describes a partially ionized gas carrying large amounts of reactive oxygen (ROS) and nitrogen species (RNS). Numerous studies reported strong antitumor activity of CAP, thus rendering it a promising approach for tumor therapy. Although several cellular mechanisms of its cytotoxicity were identified in recent years, the exact molecular effects and contributing signaling pathways are yet to be discovered. We discovered a strong activation of unfolded protein response (UPR) after CAP treatment with increased C/EBP homologous protein (CHOP) expression, which was mainly caused by protein misfolding and calcium loss in the endoplasmic reticulum. In addition, both ceramide level and ceramide metabolism were reduced after CAP treatment, which was then linked to the UPR activation. Pharmacological inhibition of ceramide metabolism resulted in sensitization of melanoma cells for CAP both in vitro and ex vivo. This study identified a novel mechanism of CAP-induced apoptosis in melanoma cells and thereby contributes to its potential application in tumor therapy.

Rheological performance of film-forming solutions and barrier properties of films fabricated from cold plasma-treated high methoxyl apple pectin and crosslinked by Ca2+: Impact of plasma treatment voltage

Sustainable and "green" technologies, such as cold plasma are gaining attention in recent times for improving the functional properties of hydrocolloids. Chemical modifications of hydrocolloids require several chemicals and solvents, which are not environment-friendly. The major objective of the study was to understand the impact of plasma treatment (170-230 V|15 min) on the rheology of film-forming solutions (FFS) and the barrier properties of pectin films. The film-forming properties of plasma-treated pectin were investigated in the presence of two plasticizers, namely, glycerol and polyethylene glycol (PEG) 400. The effects of cross-linking by CaCl₂ on the rheology of FFS and barrier properties of the films were discussed. A voltage-dependent decrease in the apparent viscosity of FFS was observed. The viscoelastic properties of the FFS were enhanced due to cross-linking. Glycerol exhibited a better plasticizing effect than PEG. Cross-linking and increasing voltage synergistically contributed towards lower oxygen and carbon dioxide transmission rates. The moisture sorption rate and capacity of the films increased with the voltage of the treatment. The resistance to extension of the films made from glycerol and PEG decreased with voltage, with no significant change in extensibility. On the other hand, the cross-linking by Ca²⁺ and plasma treatment enhanced the resistance to extension for the films made from both the plasticizers. While the increasing hydrophilicity and opacity of the films were a major drawback of plasma modification, the increase in UV barrier property of the films was an advantage of the modification.

A comprehensive study on decontamination of food-borne microorganisms by cold plasma

Food-borne microorganisms are one of the biggest concern in food industry. Food-borne microorganisms such as Listeria monocytogenes, Escherichia coli, Salmonella spp., Vibrio spp., Campylobacter jejuni, Hepatitis A are commonly found in food products and can cause severe ailments in human beings. Hence, disinfection of food is performed before packaging is performed to sterilize food. Traditional methods for disinfection of microorganisms are based on chemical, thermal, radiological and physical principles. They are highly successful, but they are complex and require more time and energy to accomplish the procedure. Cold plasma is a new technique in the field of food processing. CP treatments has no or very low effect on physical, chemical and nutritional properties of food products. This paper reviews the effect of plasma processing on food products such as change in colour, texture, pH level, protein, carbohydrate, and vitamins. Cold plasma by being a versatile, effective, economical and environmentally friendly method provides unique advantages over commercial food processing technologies for disinfection of food.

Atmospheric cold plasma: a new approach to modify protein and lipid properties of myofibrillar protein isolate from hairtail (Trichiurus lepturus) fish

BACKGROUND

Quite recently, considerable attention has been paid to atmospheric cold plasma (ACP) as an eco-friendly and highly efficient technology to modify the functional properties of foods. This study focuses on the effect of ACP on the myofibril protein and lipid quality of hairtail (Trichiurus lepturus) fish. In achieving this, the samples were treated with ACP at 50 kV for different times (30, 60, 120, 180, 240, 300 s).

RESULTS

The findings indicated slight changes in peroxide value and thiobarbituric acid reactive substances in the samples treated with ACP. A significant increase (P < 0.05) in the surface hydrophobicity (from 131.71 ± 0.81 μg to 146. 34 ± 0.81 μg), turbidity (from 0.13 ± 0.001 to 0.27 ± 0.01), and water-holding capacity (from 61.63% ± 5.7% to 64.86% ± 1.5%) were detected with treated samples.

CONCLUSIONS

We conclude that ACP treatment induces marked changes in the protein and lipid properties of myofibril protein isolated from hairtail fish, which strengthen the gel formation of hairtail fish. © 2021 Society of Chemical Industry.

Advances in emerging technologies for the decontamination of the food contact surfaces

Foodborne pathogens could be transferred to food from food contact surfaces contaminated by poor hygiene or biofilm formation. The food processing industry has various conditions favouring microbes' adherence, such as moisture, nutrients, and the microbial inoculums obtained from the raw material. The function of the ideal antimicrobial surface is preventing initial attachment of the microbes, killing the microbes or/and removing the dead bacteria. This review article provides detail about the challenges food industries are facing with respect to food contact materials. It also summarises the merits and demerits of several sanitizing methods developed for industrial use. Furthermore, it reviews the new and emerging techniques that enhance the efficiency of reducing microbial contamination. Techniques such as surface functionalisation, high-intensity ultrasound, cold plasma technologies etc. which have high potential to be used for the decontamination of food contact surfaces are discussed. The emerging designs of antibacterial surfaces provide the opportunity to reduce or eradicate the adhesion of microorganisms. The most important purpose of these surfaces is to prevent the attachment of bacteria and to kill the bacteria that come in contact. These emerging technologies have a high potential for developing safe and inert food contact materials for the food industry.

Antioxidant Effects of Anthocyanin-Rich Riceberry™ Rice Flour Prepared Using Dielectric Barrier Discharge Plasma Technology on Iron-Induced Oxidative Stress in Mice

Redox-active iron generates reactive oxygen species that can cause oxidative organ dysfunction. Thus, the anti-oxidative systems in the body and certain dietary antioxidants, such as anthocyanins, are needed to control oxidative stress. We aimed to investigate the effects of dielectric barrier discharge (DBD) plasma technology in the preparation of Riceberry™ rice flour (PRBF) on iron-induced oxidative stress in mice. PRBF using plasma technology was rich in anthocyanins, mainly cyanidine-3-glucoside and peonidine-3-glucoside. PRBF (5 mg AE/mg) lowered WBC numbers in iron dextran (FeDex)-loaded mice and served as evidence of the reversal of erythrocyte superoxide dismutase activity, plasma total antioxidant capacity, and plasma and liver thiobarbituric acid-reactive substances in the loading mice. Consequently, the PRBF treatment was observed to be more effective than NAC treatment. PRBF would be a powerful supplementary and therapeutic antioxidant product that is understood to be more potent than NAC in ameliorating the effects of iron-induced oxidative stress.

Impact of cold plasma on the biomolecules and organoleptic properties of foods: A review

Cold plasma is formed by the nonthermal ionization of gas into free electrons, ions, reactive atomic and molecular species, and ultraviolet (UV) radiation. This cold plasma can be used to alter the surface of solid and liquid foods, and it offers multiple advantages over traditional thermal treatments, such as no thermal damage and increased output variation (due to the various input parameters gas, power, plasma type, etc.). Cold plasma appears to have limited impact on the sensory and color properties, at lower power and treatment times, but there has been a statistically significant reduction in pH for most of the cold plasma treatments reviewed (p < 0.05). Carbohydrates (cross linking and glycosylation), lipids (oxidation), and proteins (secondary structure) are more significantly impacted due to cold plasma at higher intensities and longer treatment times. Although cold plasma treatments and food matrices can vary considerably, this review has identified the literary evidence of some of the influences and impacts of the vast array of cold plasma treatment parameters on the biomolecular and organoleptic properties of these foods. Due to the rapidly evolving nature of the field, we have also identified that authors prioritize the presentation of different information when publishing from different research areas. Therefore, we have proposed a number of key physical and chemical cold plasma parameters that should be considered for inclusion in all future publications in the field.

Oxidation induced by dielectric barrier discharge (DBD) plasma treatment reduces IgG/IgE binding capacity and improves the functionality of glycinin

The effect of dielectric barrier discharge (DBD) plasma treatment times from 2 to 5 min at 40 kV on IgG/IgE binding capacity and functionality of soybean glycinin was examined. A substantial reduction in the binding capacity (91.64% for IgG and 81.49% for IgE) was obtained after 5 min of plasma treatment, as determined by western-blot and ELISA analyses. Further studies demonstrated that the elimination of antigenicity and allergenicity of glycinin was directly related to plasma-induced structural changes on two aspects. A conformational alteration caused by oxidation of peptide bond amino groups, accompanied with an oxidation of Trp, Tyr, and Phe amino acid residues, which was confirmed by surface hydrophobicity, multi-spectroscopic analysis, and amino acid analysis. The cleavage of polypeptide chains inevitably partially diminished the linear epitopes, resulting in a primary decline in IgG/IgE binding capacity. Additionally, an increase in the solubility from 10.78 ± 0.35 to 65.96 ± 1.86% and significant increase in the emulsifying ability from 21.08 ± 2.64 to 160.29 ± 4.12 m²/g were observed after treatment of the plasma for 2 min. The present results confirm the potential use of DBD for the production of hypoallergenic soy protein-based products and improving their technical functions such as solubility and emulsifying ability.

Non-animal proteins as cutting-edge ingredients to reformulate animal-free foodstuffs: Present status and future perspectives

Consumer interest in protein rich diets is increasing, with more attention being paid to the protein source. Despite the occurrence of animal proteins in the human diet, non-animal proteins are gaining popularity around the world due to their health benefits, environmental sustainability, and ethical merit. These sources of protein qualify for vegan, vegetarian, and flexitarian diets. Non-animal proteins are versatile, derived mainly from cereals, vegetables, pulses, algae (seaweed and microalgae), fungi, and bacteria. This review's intent is to analyze the current and future direction of research and innovation in non-animal proteins, and to elucidate the extent (limitations and opportunities) of their applications in food and beverage industries. Prior knowledge provided relevant information on protein features (processing, structure, and techno-functionality) with particular focus on those derived from soy and wheat. In the current food landscape, beyond conventionally used plant sources, other plant proteins are gaining traction as alternative ingredients to formulate animal-free foodstuffs (e.g., meat alternatives, beverages, baked products, snack foods, and others). Microbial proteins derived from fungi and algae are also food ingredients of interest due to their high protein quantity and quality, however there is no commercial food application for bacterial protein yet. In the future, key points to consider are the importance of strain/variety selection, advances in extraction technologies, toxicity assessment, and how this source can be used to create food products for personalized nutrition.

Improving gelatin-based emulsion films with cold plasma using different gases

In this research, the effects of cold plasma treatment on the properties of gelatin-based emulsion films (GEFs) using different gases were investigated. The gases used include O2, N2, air, Ar, and ethanol-argon (EtOH-Ar). Surface hydrophobicity, morphology, water vapor permeability (WVP), and mechanical, thermal, and antifungal properties after plasma application on the film were analyzed. The results revealed that surface hydrophilicity significantly increased after cold plasma, while the contact angle significantly decreased (p < .05). Furthermore, atomic force microscopy results showed that the argon gas plasma significantly increased roughness of the GEFs surface. Besides, plasma did not decrease WVP. Different gases had no significant effect on the mechanical properties of the GEFs (p > .05). Oxygen permeability after plasma application was significantly different from the control sample; consequently, the permeability after plasma application decreased and the lowest level 55.7 (cm3μm m-2 day-1 Pa-1) was seen for oxygen gas. Plasma treatment caused etching effects and lessened the surface moisture of the polymer film. Antimicrobial activity was observed in the cold plasma-treated samples, especially under air and nitrogen atmosphere. Cold plasma treatment is an effective method for surface modification, expanding the application of emulsion films in the packing industry with improved performance properties.