Three-dimensional cell culture models for investigating human viruses

Advances in tumor microenvironment: Applications and challenges of 3D bioprinting

The tumor microenvironment (TME) assumes a pivotal role in the treatment of oncological diseases, given its intricate interplay of diverse cellular components and extracellular matrices. This dynamic ecosystem poses a serious challenge to traditional research methods in many ways, such as high research costs, inefficient translation, poor reproducibility, and low modeling success rates. These challenges require the search for more suitable research methods to accurately model the TME, and the emergence of 3D bioprinting technology is transformative and an important complement to these traditional methods to precisely control the distribution of cells, biomolecules, and matrix scaffolds within the TME. Leveraging digital design, the technology enables personalized studies with high precision, providing essential experimental flexibility. Serving as a critical bridge between in vitro and in vivo studies, 3D bioprinting facilitates the realistic 3D culturing of cancer cells. This comprehensive article delves into cutting-edge developments in 3D bioprinting, encompassing diverse methodologies, biomaterial choices, and various 3D tumor models. Exploration of current challenges, including limited biomaterial options, printing accuracy constraints, low reproducibility, and ethical considerations, contributes to a nuanced understanding. Despite these challenges, the technology holds immense potential for simulating tumor tissues, propelling personalized medicine, and constructing high-resolution organ models, marking a transformative trajectory in oncological research.

In vitro high-content tissue models to address precision medicine challenges

The field of precision medicine allows for tailor-made treatments specific to a patient and thereby improve the efficiency and accuracy of disease prevention, diagnosis, and treatment and at the same time would reduce the cost, redundant treatment, and side effects of current treatments. Here, the combination of organ-on-a-chip and bioprinting into engineering high-content in vitro tissue models is envisioned to address some precision medicine challenges. This strategy could be employed to tackle the current coronavirus disease 2019 (COVID-19), which has made a significant impact and paradigm shift in our society. Nevertheless, despite that vaccines against COVID-19 have been successfully developed and vaccination programs are already being deployed worldwide, it will likely require some time before it is available to everyone. Furthermore, there are still some uncertainties and lack of a full understanding of the virus as demonstrated in the high number new mutations arising worldwide and reinfections of already vaccinated individuals. To this end, efficient diagnostic tools and treatments are still urgently needed. In this context, the convergence of bioprinting and organ-on-a-chip technologies, either used alone or in combination, could possibly function as a prominent tool in addressing the current pandemic. This could enable facile advances of important tools, diagnostics, and better physiologically representative in vitro models specific to individuals allowing for faster and more accurate screening of therapeutics evaluating their efficacy and toxicity. This review will cover such technological advances and highlight what is needed for the field to mature for tackling the various needs for current and future pandemics as well as their relevancy towards precision medicine.

The interplay of cells, polymers, and vascularization in three-dimensional lung models and their applications in COVID-19 research and therapy

Millions of people have been affected ever since the emergence of the corona virus disease of 2019 (COVID-19) outbreak, leading to an urgent need for antiviral drug and vaccine development. Current experimentation on traditional two-dimensional culture (2D) fails to accurately mimic the in vivo microenvironment for the disease, while in vivo animal model testing does not faithfully replicate human COVID-19 infection. Human-based three-dimensional (3D) cell culture models such as spheroids, organoids, and organ-on-a-chip present a promising solution to these challenges. In this report, we review the recent 3D in vitro lung models used in COVID-19 infection and drug screening studies and highlight the most common types of natural and synthetic polymers used to generate 3D lung models.

3D engineered tissue models for studying human-specific infectious viral diseases

Viral infections cause damage to various organ systems by inducing organ-specific symptoms or systemic multi-organ damage. Depending on the infection route and virus type, infectious diseases are classified as respiratory, nervous, immune, digestive, or skin infections. Since these infectious diseases can widely spread in the community and their catastrophic effects are severe, identification of their causative agent and mechanisms underlying their pathogenesis is an urgent necessity. Although infection-associated mechanisms have been studied in two-dimensional (2D) cell culture models and animal models, they have shown limitations in organ-specific or human-associated pathogenesis, and the development of a human-organ-mimetic system is required. Recently, three-dimensional (3D) engineered tissue models, which can present human organ-like physiology in terms of the 3D structure, utilization of human-originated cells, recapitulation of physiological stimuli, and tight cell–cell interactions, were developed. Furthermore, recent studies have shown that these models can recapitulate infection-associated pathologies. In this review, we summarized the recent advances in 3D engineered tissue models that mimic organ-specific viral infections. First, we briefly described the limitations of the current 2D and animal models in recapitulating human-specific viral infection pathology. Next, we provided an overview of recently reported viral infection models, focusing particularly on organ-specific infection pathologies. Finally, a future perspective that must be pursued to reconstitute more human-specific infectious diseases is presented.

•

3D in vitro models are different from the traditional model in the infection process.

•

Human-specific infection research requires a 3D microenvironment and human cells.

•

3D in vitro infectious models can be useful for basic research on infectious disease.

•

3D in vitro infectious models recapitulate the complex cell-virus-immune interaction.

Principles for optimization and validation of mRNA lipid nanoparticle vaccines against COVID-19 using 3D bioprinting

BioNTech/Pfizer's Comirnaty and Moderna's SpikeVax vaccines consist in mRNA encapsulated in lipid nanoparticles (LNPs). The modularity of the delivery platform and the manufacturing possibilities provided by microfluidics let them look like an instant success, but they are the product of decades of intense research. There is a multitude of considerations to be made when designing an optimal mRNA-LNPs vaccine. Herein, we provide a brief overview of what is presently known and what still requires investigation to optimize mRNA LNPs vaccines. Lastly, we give our perspective on the engineering of 3D bioprinted validation systems that will allow faster, cheaper, and more predictive vaccine testing in the future compared with animal models.

Three-Dimensional Avian Hematopoietic Stem Cell Cultures as a Model for Studying Disease Pathogenesis

Three-dimensional (3D) cell culture is attracting increasing attention today because it can mimic tissue environments and provide more realistic results than do conventional cell cultures. On the other hand, very little attention has been given to using 3D cell cultures in the field of avian cell biology. Although mimicking the bone marrow niche is a classic challenge of mammalian stem cell research, experiments have never been conducted in poultry on preparing in vitro the bone marrow niche. It is well known, however, that all diseases cause immunosuppression and target immune cells and their development. Hematopoietic stem cells (HSC) reside in the bone marrow and constitute a source for immune cells of lymphoid and myeloid origins. Disease prevention and control in poultry are facing new challenges, such as greater use of alternative breeding systems and expanding production of eggs and chicken meat in developing countries. Moreover, the COVID-19 pandemic will draw greater attention to the importance of disease management in poultry because poultry constitutes a rich source of zoonotic diseases. For these reasons, and because they will lead to a better understanding of disease pathogenesis, in vivo HSC niches for studying disease pathogenesis can be valuable tools for developing more effective disease prevention, diagnosis, and control. The main goal of this review is to summarize knowledge about avian hematopoietic cells, HSC niches, avian immunosuppressive diseases, and isolation of HSC, and the main part of the review is dedicated to using 3D cell cultures and their possible use for studying disease pathogenesis with practical examples. Therefore, this review can serve as a practical guide to support further preparation of 3D avian HSC niches to study the pathogenesis of avian diseases.

Modeling viral infection with tissue engineering: COVID-19 and the next outbreaks

Pandemics caused by respiratory viruses have impacted millions of lives and caused massive destruction to global infrastructure. With their emergence, it has become a priority to develop platforms to rapidly dissect host/pathogen interactions, develop diagnostics, and evaluate therapeutics. Traditional viral culture methods do not faithfully recapitulate key aspects of infection. Tissue engineering as a discipline has developed techniques to produce three-dimensional human tissues which can serve as platforms to study respiratory viruses in vitro. In this chapter, Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has been used as a representative respiratory virus motivating the use of tissue engineering to generate in vitro culture models. SARS-CoV-2 pathophysiology, traditional cell culture, tissue engineering-based cell culture, and future directions for the field are highlighted.

3D Cell Culture Technology – A New Insight Into in Vitro Research – A Review

Most in vitro cell-based research is based on two-dimensional (2D) systems where growth and development take place on a flat surface, which does not reflect the natural environment of the cells. The imperfection and limitations of culture in 2D systems eventually led to the creation of three-dimensional (3D) culture models that more closely reproduce the actual conditions of physiological cell growth. Since the inception of 3D culture technology, many culture models have been developed, such as technologies of multicellular spheroids, organoids, and organs on chips in the technology of scaffolding, hydrogels, bio-printing and liquid media. In this review we will focus on the advantages and disadvantages of the 2D vs. 3D cell cultures technologies. We will also try to sum up available 3D culture systems and materials for building 3D scaffolds.

Recent Advances in Three-Dimensional Stem Cell Culture Systems and Applications

Cell culture is one of the most core and fundamental techniques employed in the fields of biology and medicine. At present, although the two-dimensional cell culture method is commonly used in vitro, it is quite different from the cell growth microenvironment in vivo. In recent years, the limitations of two-dimensional culture and the advantages of three-dimensional culture have increasingly attracted more and more attentions. Compared to two-dimensional culture, three-dimensional culture system is better to realistically simulate the local microenvironment of cells, promote the exchange of information among cells and the extracellular matrix (ECM), and retain the original biological characteristics of stem cells. In this review, we first present three-dimensional cell culture methods from two aspects: a scaffold-free culture system and a scaffold-based culture system. The culture method and cell characterizations will be summarized. Then the application of three-dimensional cell culture system is further explored, such as in the fields of drug screening, organoids and assembloids. Finally, the directions for future research of three-dimensional cell culture are stated briefly.

3D Cell Culture Models in COVID-19 Times: A Review of 3D Technologies to Understand and Accelerate Therapeutic Drug Discovery

In the last decades, emerging viruses have become a worldwide concern. The fast and extensive spread of the disease caused by SARS-CoV-2 (COVID-19) has impacted the economy and human activity worldwide, highlighting the human vulnerability to infectious diseases and the need to develop and optimize technologies to tackle them. The three-dimensional (3D) cell culture models emulate major tissue characteristics such as the in vivo virus-host interactions. These systems may help to generate a quick response to confront new viruses, establish a reliable evaluation of the pathophysiology, and contribute to therapeutic drug evaluation in pandemic situations such as the one that humanity is living through today. This review describes different types of 3D cell culture models, such as spheroids, scaffolds, organoids, and organs-on-a-chip, that are used in virus research, including those used to understand the new severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2).

3D culture models to study SARS-CoV-2 infectivity and antiviral candidates: From spheroids to bioprinting

The pandemic caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) is receiving worldwide attention, due to the severity of the disease (COVID-19) that resulted in more than a million global deaths so far. The urgent need for vaccines and antiviral drugs is mobilizing the scientific community to develop strategies for studying the mechanisms of SARS-CoV-2 infection, replication kinetics, pathogenesis, host-virus interaction, and infection inhibition. In this work, we review the strategies of tissue engineering in the fabrication of three-dimensional (3D) models used in virology studies, which presented many advantages over conventional cell cultures, such as complex cytoarchitecture and a more physiological microenvironment. Scaffold-free (spheroids and organoids) and scaffold-based (3D scaffolding and 3D bioprinting) approach allow the biofabrication of more realistic models relevant to the pandemic, to be used as in vitro platforms for the development of new vaccines and therapies against COVID-19.

Simplified Bioprinting-Based 3D Cell Culture Infection Models for Virus Detection

Studies of virus-host interactions in vitro may be hindered by biological characteristics of conventional monolayer cell cultures that differ from in vivo infection. Three-dimensional (3D) cell cultures show more in vivo-like characteristics and may represent a promising alternative for characterisation of infections. In this study, we established easy-to-handle cell culture platforms based on bioprinted 3D matrices for virus detection and characterisation. Different cell types were cultivated on these matrices and characterised for tissue-like growth characteristics regarding cell morphology and polarisation. Cells developed an in vivo-like morphology and long-term cultivation was possible on the matrices. Cell cultures were infected with viruses which differed in host range, tissue tropism, cytopathogenicity, and genomic organisation and virus morphology. Infections were characterised on molecular and imaging level. The transparent matrix substance allowed easy optical monitoring of cells and infection even via live-cell microscopy. In conclusion, we established an enhanced, standardised, easy-to-handle bioprinted 3D-cell culture system. The infection models are suitable for sensitive monitoring and characterisation of virus-host interactions and replication of different viruses under physiologically relevant conditions. Individual cell culture models can further be combined to a multicellular array. This generates a potent diagnostic tool for propagation and characterisation of viruses from diagnostic samples.

Differential Efficacy of Novel Antiviral Substances in 3D and Monolayer Cell Culture

Repurposing of approved drugs that target host functions also important for virus replication promises to overcome the shortage of antiviral therapeutics. Mostly, virus biology including initial screening of antivirals is studied in conventional monolayer cells. The biology of these cells differs considerably from infected tissues. 3D culture models with characteristics of human tissues may reflect more realistically the in vivo events during infection. We screened first, second, and third generation epidermal growth factor receptor (EGFR)-inhibitors with different modes of action and the EGFR-blocking monoclonal antibody cetuximab in a 3D cell culture infection model with primary human keratinocytes and cowpox virus (CPXV) for antiviral activity. Antiviral activity of erlotinib and osimertinib was nearly unaffected by the cultivation method similar to the virus-directed antivirals tecovirimat and cidofovir. In contrast, the host-directed inhibitors afatinib and cetuximab were approx. 100-fold more efficient against CPXV in the 3D infection model, similar to previous results with gefitinib. In summary, inhibition of EGFR-signaling downregulates virus replication comparable to established virus-directed antivirals. However, in contrast to virus-directed inhibitors, in vitro efficacy of host-directed antivirals might be seriously affected by cell cultivation. Results obtained for afatinib and cetuximab suggest that screening of such drugs in standard monolayer culture might underestimate their potential as antivirals.

Human Organs-on-Chips for Virology

While conventional in vitro culture systems and animal models have been used to study the pathogenesis of viral infections and to facilitate development of vaccines and therapeutics for viral diseases, models that can accurately recapitulate human responses to infection are still lacking. Human organ-on-a-chip (Organ Chip) microfluidic culture devices that recapitulate tissue–tissue interfaces, fluid flows, mechanical cues, and organ-level physiology have been developed to narrow the gap between in vitro experimental models and human pathophysiology. Here, we describe how recent developments in Organ Chips have enabled re-creation of complex pathophysiological features of human viral infections in vitro.

Microfluidic Organ Chip culture devices are emerging alternatives to conventional in vitro and animal models due to their ability to replicate many structural and functional features of human physiology and disease states.

Recent innovations demonstrate that Organ Chip technology is a promising strategy for virology studies where there have been successes in reproducing various viral disease phenotypes.

Organ Chips have enabled investigation of many aspects of viral infection, including virus–host interactions, viral therapy-resistance evolution, and development of new antiviral therapeutics, as well as underlying pathogenesis.

As Organ Chip-based assays provide accessibility to study virus-induced diseases in real time and at high resolution, they can open new avenues to uncover viral pathogenesis in a human-relevant environment and may eventually enable development of novel therapeutics and vaccines.

Bioengineering tools to speed up the discovery and preclinical testing of vaccines for SARS-CoV-2 and therapeutic agents for COVID-19

This review provides an update for the international research community on the cell modeling tools that could accelerate the understanding of SARS-CoV-2 infection mechanisms and could thus speed up the development of vaccines and therapeutic agents against COVID-19. Many bioengineering groups are actively developing frontier tools that are capable of providing realistic three-dimensional (3D) models for biological research, including cell culture scaffolds, microfluidic chambers for the culture of tissue equivalents and organoids, and implantable windows for intravital imaging. Here, we review the most innovative study models based on these bioengineering tools in the context of virology and vaccinology. To make it easier for scientists working on SARS-CoV-2 to identify and apply specific tools, we discuss how they could accelerate the discovery and preclinical development of antiviral drugs and vaccines, compared to conventional models.

A three-dimensional A549 cell culture model to study respiratory syncytial virus infections

BACKGROUND

Respiratory syncytial virus (RSV) is a primary cause of morbidity and mortality worldwide, affecting infants, young children, and immune-compromised patients; however, currently no vaccine is available for prevention of RSV infections. The overwhelming majority of our knowledge of how RSV causes infection is based upon studies that have been carried out using traditional 2D methods, with cells cultured on flat plastic dishes. Although these simplified culture systems are essential to gain an insight into the fundamentals of host-pathogen interactions, cells in 2D are not exposed to the same conditions as cells in 3D tissues in the body and are therefore a poor representation of thein vivo microenvironment. In this study, we aim to develop the first 3D culture model for RSV infection using A549 cells to test its utility for RSV pathogenesis.

METHODS

To generate spheroids, A549 cells were cultured using ultra-low attachment plates to generate 25 × 10³ cell spheroids. The viability of the spheroids was assessed by trypan blue exclusion assay and flow cytometry showing prominent live cells throughout the spheroids confirming high viability over seven days of incubation.

RESULTS

Immunostaining of A549 spheroids inoculated with RSV, showed time-dependent dissemination of the viral antigen RSV-F within the spheroid, resulting in syncytia formation and a 3-fold increase in mucin secretion compared to the uninfected cells. Additionally, RSV successfully replicated in the spheroids producing infectious virus as early as day one post-inoculation and was sustained for up to 7 days post-inoculation.

CONCLUSIONS

Results show that A549 spheroids are susceptible and permissive for RSV since they exhibit the characteristics of RSV infection including syncytia formation and mucin overexpression, suggesting that A549 spheroids can be used a promising model for studying RSV in vitro.

Coculture at the crossroads of the new microbiology techniques for the isolation of strict intracellular bacteria

Coculture played a major role in clinical microbiology by elucidating strict intracellular bacteria era. Since some of these bacteria are human pathogens, in-depth studies at the strain level are necessary to better understand their pathologies and treatment. Over the last decades, culture-independent tools have taken over the diagnostic procedure at the expense of coculture. These tools, although proven to be rapid and efficient, cannot overcome the need to culture the bacteria, as strain isolation remains a key factor to understanding its epidemiology, virulence and antibiotic susceptibility testing. Moreover, strain availability allows the development of molecular and serological tools, and remains crucial for taxonomy. This review revisits the current status of culture, its advantages, drawbacks and future needs.

A virus-induced kidney disease model based on organ-on-a-chip: Pathogenesis exploration of virus-related renal dysfunctions

Renal dysfunctions usually happen in viral infections and many viruses specially infect distal renal tubules, however the pathogenesis remains unknown. Here, in order to explore the pathogenesis of virus-related renal dysfunctions, a Pseudorabies Virus (PrV) induced kidney disease model was built on a distal tubule-on-a-chip (DTC), for the first time. The barrier structure and Na reabsorption of distal renal tubules were successfully reconstituted in DTCs. After PrV infection, results showed electrolyte regulation dysfunction in Na reabsorption for the disordered Na transporters, the broken reabsorption barrier, and the transformed microvilli. And it would lead to virus induced serum electrolyte abnormalities. This work brought us a new cognition about the advantages of organ-on-a-chip (OOC) in virus research, for it had given us a better insight into the pathogenesis of virus induced dysfunctions, based on its unique ability in function reproduction.

Nanoparticle-mediated drug delivery to treat infections in the female reproductive tract: evaluation of experimental systems and the potential for mathematical modeling

A variety of drug-delivery platforms have been employed to deliver therapeutic agents across cervicovaginal mucus (CVM) and the vaginal mucosa, offering the capability to increase the longevity and retention of active agents to treat infections of the female reproductive tract (FRT). Nanoparticles (NPs) have been shown to improve retention, diffusion, and cell-specific targeting via specific surface modifications, relative to other delivery platforms. In particular, polymeric NPs represent a promising option that has shown improved distribution through the CVM. These NPs are typically fabricated from nontoxic, non-inflammatory, US Food and Drug Administration-approved polymers that improve biocompatibility. This review summarizes recent experimental studies that have evaluated NP transport in the FRT, and highlights research areas that more thoroughly and efficiently inform polymeric NP design, including mathematical modeling. An overview of the in vitro, ex vivo, and in vivo NP studies conducted to date – whereby transport parameters are determined, extrapolated, and validated – is presented first. The impact of different NP design features on transport through the FRT is summarized, and gaps that exist due to the limitations of iterative experimentation alone are identified. The potential of mathematical modeling to complement the characterization and evaluation of diffusion and transport of delivery vehicles and active agents through the CVM and mucosa is discussed. Lastly, potential advancements combining experimental and mathematical knowledge are suggested to inform next-generation NP designs, such that infections in the FRT may be more effectively treated.

Discovery of an Australian Chelonia mydas papillomavirus via green turtle primary cell culture and qPCR

The number of reptilian viruses detected are continuously increasing due to improvements and developments of new diagnostic techniques. In this case we used primary cell culture and qPCR to describe the first Australian Chelonia mydas papillomavirus. Commercial chelonian cell lines are limited to one cell line from a terrestrial turtle (Terrapene Carolina). To establish primary cultures from green turtles (Chelonia mydas), turtle eggs were collected from Heron Island, Queensland, Australia. From day 35 of incubation at 29°, the embryos were harvested to establish primary cultures. The primary cell cultures were grown in Dulbecco's Modified Eagle Medium, 90% and foetal bovine serum, 10%. The cells became uniformly fibroblastic-shaped after 15 passages. The growth rate resembled that of cells originating from other cold-blooded animals and the average doubling time was ∼5 days from the 20th passage. Karyotyping and molecular analysis of mitochondrial DNA D-loop gene were carried out for cell authentication. The primary cell cultures were screened to exclude mycoplasma contamination. Two primary cell lineages were found to be susceptible to Bohle iridovirus. The primary cell cultures were used to screen samples from green turtles foraging along the East Coast of Queensland for the presence of viruses. Homogenates from eight skin tumour samples caused cytopathic effects and were confirmed by qPCR to be infected with papillomavirus.