Alginate lyase: Structure, property, and application

Evaluation effect of alginate hydrogel containing losartan on wound healing and gene expression

Skin tissue engineering has become an increasingly popular alternative to conventional treatments for skin injuries. Hydrogels, owing to their advantages have become the ideal option for wound dressing, and they are extensively employed in a mixture of different drugs to accelerate wound healing. Sodium alginate is a readily available natural polymer with advantages such as bio-compatibility and a non-toxicological nature that is commonly used in hydrogel form for medical applications such as wound repair and drug delivery in skin regenerative medicine. Losartan is a medicine called angiotensin receptor blocker (ARB) that can prevent fibrosis by inhibiting AT1R (angiotensin II type 1 receptor). In this research, for the first time, three-dimensional scaffolds based on cross-linked alginate hydrogel with CaCl2 containing different concentrations of losartan for slow drug release and exudate absorption were prepared and characterized as wound dressing. Alginate hydrogel was mixed with 10, 1, 0.1, and 0.01 mg/mL of losartan, and their properties such as morphology, chemical structure, water uptake properties, biodegradability, stability assay, rheology, blood compatibility, and cellular response were evaluated. In addition, the therapeutic efficiency of the developed hydrogels was then assessed in an in vitro wound healing model and with a gene expression. The results revealed that the hydrogel produced was very porous (porosity of 47.37 ± 3.76 µm) with interconnected pores and biodegradable (weight loss percentage of 60.93 ± 4.51% over 14 days). All hydrogel formulations have stability under various conditions. The use of CaCl2 as a cross-linker led to an increase in the viscosity of alginate hydrogels. An in vitro cell growth study revealed that no cytotoxicity was observed at the suggested dosage of the hydrogel. Increases in Losartan dosage, however, caused hemolysis. In vivo study in adult male rats with a full-thickness model showed greater than 80% improvement of the primary wound region after 2 weeks of treatment with alginate hydrogel containing 0.1 mg/mL Losartan. RT-PCR and immunohistochemistry analysis showed a decrease in expression level of TGF-β1 and VEGF in treatment groups. Histological analysis demonstrated that the alginate hydrogel containing Losartan can be effective in wound repair by decreasing the size of the scar and tissue remodeling, as evidenced by future in vivo studies.

Preparation of bright yellow color sodium alginate solution

Sodium alginate (SA) is a marine polysaccharide biomass material that is environmentally friendly and exhibits color-changing properties under certain conditions. In this study, we have discovered sodium alginate solution to be chromogenic under four conditions, namely alkali-chromogenic, thermo-chromogenic, force-chromogenic and photo-chromogenic. Under simple strong alkaline conditions, sodium alginate forms clusters of blue light-absorbing chromogenic aggregates, which exhibit a bright yellow color at a certain size. Under different temperature conditions, SA shows varying shades of yellow, and the color tends to stabilize after 48 h of resting. The aggregates can be dispersed by stirring, which changes SA from yellow to colorless. The yellow color can then be recovered after resting. Additionally, exposure to sunlight can cause the yellow SA to fade, but the color can be restored by reheating. Therefore, the force-chromogenic and photo-chromogenic properties are reversible. This makes it a promising material for use in color-developing and indicating materials. It is expected to become a sodium alginate cluster pigment with broad application prospects in the future.

Preparation, Structural Characterization, and Enzymatic Properties of Alginate Lyase Immobilized on Magnetic Chitosan Microspheres

Alginate lyase is an enzyme that catalyses the hydrolysis of alginate into alginate oligoalginates. To enhance enzyme stability and recovery, a facile strategy for alginate lyase immobilization was developed. Novel magnetic chitosan microspheres were synthesized and used as carriers to immobilize alginate lyase. The immobilization of alginate lyase on magnetic chitosan microspheres was successful, as proven by Fourier transform infrared spectroscopy and X-ray diffraction spectra. Enzyme immobilization exhibited the best performance at an MCM dosage of 1.5 g/L, adsorption time of 2.0 h, glutaraldehyde concentration of 0.2%, and immobilization time of 2.0 h. The optimal pH of the free alginate lyase was 7.5, and this pH value was shifted to 8.0 after immobilization. No difference was observed at the optimal temperature (45 °C) for the immobilized and free enzymes. The immobilized alginate lyase displayed better thermal stability than the free alginate lyase. The Km values of the free and immobilized enzymes were 0.05 mol/L and 0.09 mol/L, respectively. The immobilized alginate lyase retained 72% of its original activity after 10 batch reactions. This strategy was found to be a promising method for immobilizing alginate lyase.

Expression and Characterization of an Efficient Alginate Lyase from Psychromonas sp. SP041 through Metagenomics Analysis of Rotten Kelp

Alginate is derived from brown algae, which can be cultivated in large quantities. It can be broken down by alginate lyase into alginate oligosaccharides (AOSs), which exhibit a higher added value and better bioactivity than alginate. In this study, metagenomic technology was used to screen for genes that code for high-efficiency alginate lyases. The candidate alginate lyase gene alg169 was detected from Psychromonas sp. SP041, the most abundant species among alginate lyase bacteria on selected rotten kelps. The alginate lyase Alg169 was heterologously expressed in Escherichia coli BL21 (DE3), Ni-IDA-purified, and characterized. The optimum temperature and pH of Alg169 were 25 °C and 7.0, respectively. Metal ions including Mn2+, Co2+, Ca2+, Mg2+, Ni2+, and Ba2+ led to significantly increased enzyme activity. Alg169 exhibited a pronounced dependence on Na+, and upon treatment with Mn2+, its activity surged by 687.57%, resulting in the highest observed enzyme activity of 117,081 U/mg. Bioinformatic analysis predicted that Alg169 would be a double-domain lyase with a molecular weight of 65.58 kDa. It is a bifunctional enzyme with substrate specificity to polyguluronic acid (polyG) and polymannuronic acid (polyM). These results suggest that Alg169 is a promising candidate for the efficient manufacturing of AOSs from brown seaweed.

Enzyme-Linked Lipid Nanocarriers for Coping Pseudomonal Pulmonary Infection. Would Nanocarriers Complement Biofilm Disruption or Pave Its Road?

Introduction

Cystic fibrosis (CF) is associated with pulmonary Pseudomonas aeruginosa infections persistent to antibiotics.

Methods

To eradicate pseudomonal biofilms, solid lipid nanoparticles (SLNs) loaded with quorum-sensing-inhibitor (QSI, disrupting bacterial crosstalk), coated with chitosan (CS, improving internalization) and immobilized with alginate lyase (AL, destroying alginate biofilms) were developed.

Results

SLNs (140-205 nm) showed prolonged release of QSI with no sign of acute toxicity to A549 and Calu-3 cells. The CS coating improved uptake, whereas immobilized-AL ensured >1.5-fold higher uptake and doubled SLN diffusion across the artificial biofilm sputum model. Respirable microparticles comprising SLNs in carbohydrate matrix elicited aerodynamic diameters MMAD (3.54, 2.48 µm) and fine-particle-fraction FPF (65, 48%) for anionic and cationic SLNs, respectively. The antimicrobial and/or antibiofilm activity of SLNs was explored in Pseudomonas aeruginosa reference mucoid/nonmucoid strains as well as clinical isolates. The full growth inhibition of planktonic bacteria was dependent on SLN type, concentration, growth medium, and strain. OD measurements and live/dead staining proved that anionic SLNs efficiently ceased biofilm formation and eradicated established biofilms, whereas cationic SLNs unexpectedly promoted biofilm progression. AL immobilization increased biofilm vulnerability; instead, CS coating increased biofilm formation confirmed by 3D-time lapse confocal imaging. Incubation of SLNs with mature biofilms of P. aeruginosa isolates increased biofilm density by an average of 1.5-fold. CLSM further confirmed the binding and uptake of the labeled SLNs in P. aeruginosa biofilms. Considerable uptake of CS-coated SLNs in non-mucoid strains could be observed presumably due to interaction of chitosan with LPS glycolipids in the outer cell membrane of P. aeruginosa.

Conclusion

The biofilm-destructive potential of QSI/SLNs/AL inhalation is promising for site-specific biofilm-targeted interventional CF therapy. Nevertheless, the intrinsic/extrinsic fundamentals of nanocarrier-biofilm interactions require further investigation.

Preliminary identification and semi-quantitative characterization of a multi-faceted high-stability alginate lyase from marine microbe Seonamhaeicola algicola with anti-biofilm effect on Pseudomonas aeruginosa

Alginate lyases with unique characteristics for degrading alginate into size-defined oligosaccharide fractions, were considered as the potential agents for disrupting Pseudomonas aeruginosa biofilms. In our study, a novel endolytic PL-7 alginate lyase, named AlyG2, was cloned and expressed through Escherichia coli. This enzyme exhibited excellent properties: it maintained more than 85% activity at low temperatures of 4 °C and high temperatures of 70 °C. After 1 h of incubation at 4 °C, it still retained over 95% activity, demonstrating the ability to withstand low temperature. The acid-base and salt tolerance properties shown it preserves more than 50% activity in the pH range of 5.0 to 11.0 and in a high salt environment at 3000 mM NacCl, indicating its high stability in several aspects. More importantly, AlyG2 in our research was revealed to be effective at removing mature biofilms and inhibiting biofilm formation produced by Pseudomonas aeruginosa, and the inhibition and disruption rates were 47.25 ± 4.52% and 26.5 ± 6.72%, respectively. Additionally, the enzyme AlyG2 promoted biofilm disruption in combination with antibiotics, particularly manifesting the synergistic effect with erythromycin (FIC=0.5). In all, these results offered that AlyG2 with unique characteristics may be an effective technique for the clearance or disruption of biofilm produced by P. aeruginosa.

Identification and characterization of a critical loop for the high activity of alginate lyase VaAly2 from the PL7_5 subfamily

As the major component in the cell wall of brown algae, alginates are degradable by alginate lyases via β-elimination. Alginate lyases can be categorized into various polysaccharide lyase (PL) families, and PL7 family alginate lyases are the largest group and can be divided into six subfamilies. However, the major difference among different PL7 subfamilies is not fully understood. In this work, a marine alginate lyase, VaAly2, from Vibrio alginolyticus ATCC 17749 belonging to the PL7_5 subfamily was identified and characterized. It displayed comparatively high alginolytic activities toward different alginate substrates and functions as a bifunctional lyase. Molecular docking and biochemical analysis suggested that VaAly2 not only contains a key catalyzing motif (HQY) conserved in the PL7 family but also exhibits some specific characters limited in the PL7_5 subfamily members, such as the key residues and a long loop1 structure around the active center. Our work provides insight into a loop structure around the center site which plays an important role in the activity and substrate binding of alginate lyases belonging to the PL7_5 subfamily.

Ultrasound standing wave spatial patterning of human umbilical vein endothelial cells for 3D micro-vascular networks formation

Generating functional and perfusable micro-vascular networks is an important goal for the fabrication of large and three-dimensional tissues. Up to now, the fabrication of micro-vascular networks is a complicated multitask involving several different factors such as time consuming, cells survival, micro-diameter vasculature and strict alignment. Here, we propose a technique combining multi-material extrusion and ultrasound standing wave forces to create a network structure of human umbilical vein endothelial cells within a mixture of calcium alginate and decellularized extracellular matrix. The functionality of the matured microvasculature networks was demonstrated through the enhancement of cell-cell adhesion, angiogenesis process, and perfusion tests with microparticles, FITC-dextran, and whole mouse blood. Moreover, animal experiments exhibited the implantability including that the pre-existing blood vessels of the host sprout towards the preformed vessels of the scaffold over time and the microvessels inside the implanted scaffold matured from empty tubular structures to functional blood-carrying microvessels in two weeks.

Improving the thermostability of a novel PL-6 family alginate lyase by rational design engineering for industrial preparation of alginate oligosaccharides

Alginate is degraded into alginate oligosaccharides with various biological activities by enzymes. However, the thermostability of the enzyme limits its industrial application. In this study, a novel PL-6 alginate lyase, AlyRm6A from Rhodothermus marinus 4252 was expressed and characterized. In addition, an efficient comprehensive strategy was proposed, including automatic design of heat-resistant mutants, multiple computer-aided ΔΔGfold value calculation, and conservative analysis of mutation sites. AlyRm6A has naturally high thermostability. Compared with the WT, T43I and Q216I kept their original activities, and their half-lives were increased from 3.68 h to 4.29 h and 4.54 h, melting point temperatures increased from 61.5 °C to 62.9 °C and 63.5 °C, respectively. The results of circular dichroism showed that both the mutants and the wild type had the characteristic peaks of β-sheet at 195 nm and 216 nm, which indicated that there was no significant effect on the secondary structure of the protein. Molecular dynamics simulation (MD) analyses suggest that the enhancement of the hydrophobic interaction network, improvement of molecular rigidity, and denser structure could improve the stability of AlyRm6A. To the best of our knowledge, our findings indicate that AlyRm6A mutants exhibit the highest thermostability among the characterized PL-6 alginate lyases, making them potential candidates for industrial production of alginate oligosaccharides.

A Novel Cold-Adapted and High-Alkaline Alginate Lyase with Potential for Alginate Oligosaccharides Preparation

Alginate oligosaccharides (AOs) prepared through enzymatic reaction by diverse alginate lyases under relatively controllable and moderate conditions possess versatile biological activities. But widely used commercial alginate lyases are still rather rare due to their poor properties (e.g., lower activity, worse thermostability, ion tolerance, etc.). In this work, the alginate lyase Alyw208, derived from Vibrio sp. W2, was expressed in Yarrowia lipolytica of food grade and characterized in order to obtain an enzyme with excellent properties adapted to industrial requirements. Alyw208 classified into the polysaccharide lyase (PL) 7 family showed maximum activity at 35 °C and pH 10.0, indicating its cold-adapted and high-alkaline properties. Furthermore, Alyw208 preserved over 70% of the relative activity within the range of 10-55 °C, with a broader temperature range for the activity compared to other alginate-degrading enzymes with cold adaptation. Recombinant Alyw208 was significantly activated with 1.5 M NaCl to around 2.1 times relative activity. In addition, the endolytic Alyw208 was polyG-preferred, but identified as a bifunctional alginate lyase that could degrade both polyM and polyG effectively, releasing AOs with degrees of polymerization (DPs) of 2-6 and alginate monomers as the final products (that is, DPs 1-6). Alyw208 has been suggested with favorable properties to be a potent candidate for biotechnological and industrial applications.

Seaweed polysaccharide nanocomposite films: A review

A million tonnes of plastic produced each year are disposed of after single use. Biodegradable polymers have become a promising material as an alternative to petroleum-based polymers. Utilising biodegradable polymers will promote environmental sustainability which has emerged with potential features and performances for various applications in different sectors. Seaweed-derived polysaccharides-based composites have been the focus of numerous studies due to the composites' renewability and sustainability for industries (food packaging and medical fields like tissue engineering and drug delivery). Due to their biocompatibility, abundance, and gelling ability, seaweed derivatives such as alginate, carrageenan, and agar are commonly used for this purpose. Seaweed has distinct film-forming characteristics, but its mechanical and water vapour barrier qualities are weak. Thus, modifications are necessary to enhance the seaweed properties. This review article summarises and discusses the effect of incorporating seaweed films with different types of nanoparticles on their mechanical, thermal, and water barrier properties.

Microbial exopolysaccharide: Sources, stress conditions, properties and application in food and environment: A comprehensive review

Microbial glucan or exopolysaccharides (EPS) have caught an eye of researchers from decades. The unique characteristics of EPS make it suitable for various food and environmental applications. This review overviews the different types of exopolysaccharides, sources, stress conditions, properties, characterization techniques and applications in food and environment. The yield and production condition of EPS is a major factor affecting the cost and its applications. Stress conditions are very important as it stimulates the microorganism for enhanced EPS production and affects its properties. As far as application is concerned specific properties of EPS such as, hydrophilicity, less oil uptake behavior, film forming ability, adsorption potential have applications in both food and environment sector. Novel and improved method of production, feed stock and right choice of microorganisms with stress conditions are critical for desired functionality and yield of the EPS.

QCM-Based MgFe2O4@CaAlg Nanocomposite as a Fast Response Nanosensor for Real-Time Detection of Methylene Blue Dye

Methylene blue (MB) dye is a common colorant used in numerous industries, particularly the textile industry. When methylene blue is discharged into water bodies without being properly treated, it may seriously damage aquatic and human life. As a result, a variety of methods have been established to remove dyes from aqueous systems. Thanks to their distinguishing features e.g., rapid responsiveness, cost-effectiveness, potential selectivity, portability, and simplicity, the electrochemical methods provided promising techniques. Considering these aspects, a novel quartz crystal microbalance nanosensors based on green synthesized magnesium ferrite nanoparticles (QCM-Based MgFe₂O₄ NPs) and magnesium ferrite nanoparticles coated alginate hydrogel nanocomposite (QCM-Based MgFe₂O₄@CaAlg NCs) were designed for real-time detection of high concentrations of MB dye in the aqueous streams at different temperatures. The characterization results of MgFe₂O₄ NPs and MgFe₂O₄@CaAlg NCs showed that the MgFe₂O₄ NPs have synthesized in good crystallinity, spherical shape, and successfully coated by the alginate hydrogel. The performance of the designed QCM-Based MgFe₂O₄ NPs and MgFe₂O₄@CaAlg NCs nanosensors were examined by the QCM technique, where the developed nanosensors showed great potential for dealing with continuous feed, very small volumes, high concentrations of MB, and providing an instantaneous response. In addition, the alginate coating offered more significant attributes to MgFe₂O₄ NPs and enhanced the sensor work toward MB monitoring. The sensitivity of designed nanosensors was evaluated at different MB concentrations (100 mg/L, 400 mg/L, and 800 mg/L), and temperatures (25 °C, 35 °C, and 45 °C). Where a real-time detection of 400 mg/L MB was achieved using the developed sensing platforms at different temperatures within an effective time of about 5 min. The results revealed that increasing the temperature from 25 °C to 45 °C has improved the detection of MB using the MgFe₂O₄@CaAlg NCs nanosensor and the MgFe₂O₄@CaAlg NCs nanosensor exhibited high sensitivity for different MB concentrations with more efficiency than the MgFe₂O₄ NPs nanosensor.

Characterization of degradation patterns and enzymatic properties of a novel alkali-resistant alginate lyase AlyRm1 from Rubrivirga marina

Alginate lyase is essential for the production of alginate oligosaccharides (AOSs), which exhibit diverse bioactivities and have numerous applications in the food and pharmaceutical industries. The creation of recombinant alginate lyase by genetic engineering lays a crucial foundation for the commercialization of alginate lyase. This study cloned and expressed the polysaccharide lyase family 6 (PL6) alginate lyase gene alyrm1 from Rubrivirga marina.The optimum temperature and pH for recombinant AlyRm1 are 30 °C and 10.0, respectively. AlyRm1 shows good alkaline stability, for it remained over 80% of the enzyme activity after being incubated at pH 10.0 for 24 h AlyRm1 preferentially degrades PolyM into AOSs with degrees of polymerization (DP) 2-5 and monosaccharides as an endolytic bifunctional lyase. In addition, the analysis of degradation products toward oligosaccharides revealed that the minimal substrate of AlyRm1 is trisaccharide and clarified the degradation patterns.

Effects of Texture Modifiers on Physicochemical Properties of 3D-Printed Meat Mimics from Pea Protein Isolate-Alginate Gel Mixture

Meat mimics were prepared from pea protein isolate-alginate gel via 3D printing. The texture of 3D-printed meat mimics was modified by incorporating transglutaminase (TGase) or κ-carrageenan (κc) at 0.3, 0.6 or 0.9% (w/w) into printing material prior to 3D printing. Rheological properties of modified printing material were measured; results were used to support 3D printing results. Textural properties of raw and cooked meat mimics were determined and compared with those of selected animal meats, namely, pork tenderloin, chicken breast, salmon meat and Spanish mackerel. Cooking losses of meat mimics were also determined. G', G″ and tan δ of TGase-modified material were not significantly different from those of the control. In contrast, increasing κc content resulted in increased G' and G″; tan δ of all κc-modified samples decreased from that of the control. Addition of TGase at 0.9% into printing material increased the hardness of raw meat mimics, while κc at 0.9% increased hardness of cooked meat mimics. Raw meat mimics treated with 0.9% TGase exhibited texture closest to raw salmon. Texture of cooked meat mimics treated with 0.9% κc was closest to that of cooked salmon. TGase-treated meat mimics tended to experience lower cooking losses, while κc-treated meat mimics exhibited an opposite trend.

Purification and Identification of Lipid-Lowering Protein from Barley Extract after Lactiplantibacillus plantarum dy-1 fermentation

Previous studies have found that the protein in barley extract fermented by Lactiplantibacillus plantarum dy-1 has the ability to inhibit lipid accumulation. However, the isolation, purification, and structural identification of the protein with lipid-lowering activity were still needed. In the present study, barley protein fermented by L. plantarum dy-1 with the optimal lipid-lowering ability was isolated and purified in three steps: using ammonium sulfate precipitation, anion-exchange chromatography, and size-exclusion chromatography. Combined with the model of HepG2 cells induced by oleic acid, the results showed that the pure protein LFBEP-C1 had the best lipid-lowering potential. Furthermore, our research found that LFBEP-C1 enriched the content of hydrophobic amino acids in LFBEP-C1. Ultraviolet spectroscopy analysis indicated that the glycosidic bond in LFBEP-C1 was an O-type glycosidic bond. The FTIR and circular dichroism spectra indicated that α-helix and random coil were the main secondary structures of LFBEP-C1. Mass spectrometry determined the theoretical molecular weight of LFBEP-C1 as 48 kDa, and its amino acid coverage was 63%. These findings suggest that the protein LFBEP-C1 with the best lipid-lowering activity was isolated and purified, and its structural characteristics were identified.

1H, 13C, 15N resonance assignment of the enzyme KdgF from Bacteroides eggerthii

To fully utilize carbohydrates from seaweed biomass, the degradation of the family of polysaccharides known as alginates must be understood. A step in the degradation of alginate is the conversion of 4,5-unsaturated monouronates to 4-deoxy-L-erythro-5-hexoseulose catalysed by the enzyme KdgF. In this study BeKdgF from Bacteroides eggerthii from the human gut microbiota has been produced isotopically labelled in Escherichia coli. Here the ¹H, ¹³C, and ¹⁵N NMR chemical shift assignment for BeKdgF is reported.

Enzymatic depolymerization of alginate by two novel thermostable alginate lyases from Rhodothermus marinus

Alginate (alginic acid) is a linear polysaccharide, wherein (1→4)-linked β-D-mannuronic acid and its C5 epimer, α-L-guluronic acid, are arranged in varying sequences. Alginate lyases catalyze the depolymerization of alginate, thereby cleaving the (1→4) glycosidic linkages between the monomers by a β-elimination mechanism, to yield unsaturated 4-deoxy-L-erythro-hex-4-enopyranosyluronic acid (Δ) at the non-reducing end of resulting oligosaccharides (α-L-erythro configuration) or, depending on the enzyme, the unsaturated monosaccharide itself. In solution, the released free unsaturated monomer product is further hydrated in a spontaneous (keto-enol tautomerization) process to form two cyclic stereoisomers. In this study, two alginate lyase genes, designated alyRm3 and alyRm4, from the marine thermophilic bacterium Rhodothermus marinus (strain MAT378), were cloned and expressed in Escherichia coli. The recombinant enzymes were characterized, and their substrate specificity and product structures determined. AlyRm3 (PL39) and AlyRm4 (PL17) are among the most thermophilic and thermostable alginate lyases described to date with temperature optimum of activity at ∼75 and 81°C, respectively. The pH optimum of activity of AlyRm3 is ∼5.5 and AlyRm4 at pH 6.5. Detailed NMR analysis of the incubation products demonstrated that AlyRm3 is an endolytic lyase, while AlyRm4 is an exolytic lyase, cleaving monomers from the non-reducing end of oligo/poly-alginates.

Improvement in the probiotic efficacy of Bacillus subtilis E20-stimulates growth and health status of white shrimp, Litopenaeus vannamei via encapsulation in alginate and coated with chitosan

The aim of this study was to increase the efficacy of probiotic Bacillus subtilis E20 by encapsulating the probiotic in alginate and coating it with chitosan. The protective effect was evaluated by firstly ensuring the viability of encapsulated probiotics in simulated gastrointestinal fluid (SGF) and simulated intestinal fluid (SIF) conditions and then at different storage temperatures. In addition, the encapsulated probiotic was incorporated into the diet to improve the growth performance and health status of white shrimp, Litopenaeus vannamei. B. subtilis E20 has the ability to survive in SGF when encapsulated in 1.5-2% alginate and coated with 0.4% chitosan. Furthermore, viability increased significantly in SIF compared to the probiotic encapsulated in 1% alginate and coated with 0.4% chitosan and the non-encapsulated probiotic. Longer storage time and adverse conditions affected probiotics' survival, which was improved by the encapsulation with significantly higher viability than the non-encapsulated probiotic at different temperatures and storage duration. Encapsulation of B. subtilis E20 and dietary administration at 10⁷ CFU kg^-1 decreased shrimp mortality after a Vibrio infection, thereby improving shrimp's disease resistance, while the non-encapsulated probiotic required 10⁹ CFU kg^-1 to achieve better resistance. Although the best results of growth performance, immune response, and disease resistance against Vibrio alginolyticus were found in the shrimp fed with the diets supplemented with encapsulated probiotic at >10⁸ CFU kg^-1, shrimp's growth performance and health status improved after being fed 10⁷ CFU kg^-1 encapsulated probiotic for 56 days. Together, the results of this study prove that encapsulation could improve the viability of probiotic in different gastrointestinal conditions and adverse storage temperatures. Overall, lower concentrations of encapsulated probiotic B. subtilis E20 (10⁷ CFU kg^-1) was able to increase the growth performance and health status of shrimp.

Alginate Lyases from Marine Bacteria: An Enzyme Ocean for Sustainable Future

The cell wall of brown algae contains alginate as a major constituent. This anionic polymer is a composite of β-d-mannuronate (M) and α-l-guluronate (G). Alginate can be degraded into oligosaccharides; both the polymer and its products exhibit antioxidative, antimicrobial, and immunomodulatory activities and, hence, find many commercial applications. Alginate is attacked by various enzymes, collectively termed alginate lyases, that degrade glycosidic bonds through β-elimination. Considering the abundance of brown algae in marine ecosystems, alginate is an important source of nutrients for marine organisms, and therefore, alginate lyases play a significant role in marine carbon recycling. Various marine microorganisms, particularly those that thrive in association with brown algae, have been reported as producers of alginate lyases. Conceivably, the marine-derived alginate lyases demonstrate salt tolerance, and many are activated in the presence of salts and, therefore, find applications in the food industry. Therefore, this review summarizes the structural and biochemical features of marine bacterial alginate lyases along with their applications. This comprehensive information can aid in the expansion of future prospects of alginate lyases.

Alginate oligosaccharides: The structure-function relationships and the directional preparation for application

Alginate oligosaccharides (AOS) are degradation products of alginate extracted from brown algae. With low molecular weight, high water solubility, and good biological activity, AOS present anti-inflammatory, antimicrobial, antioxidant, and antitumor properties. They also exert growth-promoting effects in animals and plants. Three types of AOS, mannuronate oligosaccharides (MAOS), guluronate oligosaccharides (GAOS), and heterozygous mannuronate and guluronate oligosaccharides (HAOS), can be produced from alginate by enzymatic hydrolysis. Thus far, most studies on the applications and biological activities of AOS have been based mainly on a hybrid form of HAOS. To improve the directional production of AOS for practical applications, systematic studies on the structures and related biological activities of AOS are needed. This review provides a summary of current understanding of structure-function relationships and advances in the production of AOS. The current challenges and opportunities in the application of AOS is suggested to guide the precise application of AOS in practice.

Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing

With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.

Comparative Gene Expression and Physiological Analyses Reveal Molecular Mechanisms in Wound-Induced Spore Formation in the Edible Seaweed Nori

Genetic reprogramming of differentiated cells is studied broadly in multicellular Viridiplantae as an adaptation to herbivory or damage; however, mechanisms underlying cell development and redifferentiation are largely unknown in red algae, their nearest multicellular relatives. Here we investgate cell reprogramming in the widely cultivated, edible seaweed Neopyropia yezoesis ("nori"), where vegetative cells in wounded blades differentiate and release as large numbers of asexual spores. Based upon physiological changes and transcriptomic dynamics after wound stress in N. yezoensis and its congener Neoporphyra haitanensis, another cultivar that does not differentiate spores after wounding, we propose a three-phase model of wound-induced spore development in N. yezoensis. In Phase I, propagation of ROS by RBOH and SOD elicites systematic transduction of the wound signal, while Ca²⁺ dependent signaling induces cell reprogramming. In Phase II, a TOR signaling pathway and regulation of cyclin and CDK genes result in cell divisions that spread inward from the wound edge. Once sporangia form, Phase III involves expression of proteins required for spore maturation and cell wall softening. Our analyses not only provide the first model for core molecular processes controlling cellular reprogramming in rhodophytes, but also have practical implications for achieving greater control over seeding in commercial nori farming.

Algae: Study of Edible and Biologically Active Fractions, Their Properties and Applications

The beneficial properties of algae make them perfect functional ingredients for food products. Algae have a high energy value and are a source of biologically active substances, proteins, fats, carbohydrates, vitamins, and macro- and microelements. They are also rich in polyunsaturated fatty acids, proteins, mycosporine-like amino acids, polysaccharides, polyphenols, carotenoids, sterols, steroids, lectins, halogenated compounds, polyketides, alkaloids, and carrageenans. Different extraction parameters are used depending on the purpose and the substances to be isolated. In this study, the following parameters were used: hydromodule 1:10 and an extraction duration of 1-2 h at the extraction temperature of 25-40 °C. A 30-50% solution of ethanol in water was used as an extractant. Algae extracts can be considered as potential natural sources of biologically active compounds with antimicrobial activity and antiviral properties. The content of crude protein, crude fat, and carbohydrates in U. Prolifera, C. racemosa var. peltata (Chlorophyta), S. oligocystum and S. fusiforme (SF-1) was studied. It was found that C. muelleri (Bacillariophyta), I. galbana (Haptophyta), and T. weissflogii (Bacillariophyta) contain about 1.9 times more omega-3 than omega-6 fatty acids. N. gaditana (Ochrophyta), D. salina (Chlorophyta), P. tricornutum (Bacillaryophyta) and I. galbana (Haptophyta) extracts showed inhibitory activity of varying intensities against E. coli or P. aeruginosa. In addition, algae and algae-derived compounds have been proposed to offer attractive possibilities in the food industry, especially in the meat sector, to evolve functional foods with myriad functionalities. Algae can increase the biological activity of food products, while the further study of the structure of compounds found in algae can broaden their future application possibilities.

Insights into Algal Polysaccharides: A Review of Their Structure, Depolymerases, and Metabolic Pathways

In recent years, marine macroalgae with extensive biomass have attracted the attention of researchers worldwide. Furthermore, algal polysaccharides have been widely studied in the food, pharmaceutical, and cosmetic fields because of their various kinds of bioactivities. However, there are immense barriers to their application as a result of their high molecular size, poor solubility, hydrocolloid nature, and low physiological activities. Unique polysaccharides, such as laminarin, alginate, fucoidan, agar, carrageenan, porphyran, ulvan, and other complex structural polysaccharides, can be digested by marine bacteria with many carbohydrate-active enzymes (CAZymes) by breaking down the limitation of glycosidic bonds. However, structural elucidation of algal polysaccharides, metabolic pathways, and identification of potential polysaccharide hydrolases that participate in different metabolic pathways remain major obstacles restricting the efficient utilization of algal oligosaccharides. This review focuses on the structure, hydrolase families, metabolic pathways, and potential applications of seven macroalgae polysaccharides. These results will contribute to progressing our understanding of the structure of algal polysaccharides and their metabolic pathways and will be valuable for clearing the way for the compelling utilization of bioactive oligosaccharides.

Recent Advances in Bioutilization of Marine Macroalgae Carbohydrates: Degradation, Metabolism, and Fermentation

Marine macroalgae are considered renewable natural resources due to their high carbohydrate content, which gives better utilization value in biorefineries and higher value conversion than first- and second-generation biomass. However, due to the diverse composition, complex structure, and rare metabolic pathways of macroalgae polysaccharides, their bioavailability needs to be improved. In recent years, enzymes and pathways related to the degradation and metabolism of macroalgae polysaccharides have been continuously developed, and new microbial fermentation platforms have emerged. Aiming at the bioutilization and transformation of macroalgae resources, this review describes the latest research results from the direction of green degradation, biorefining, and metabolic pathway design, including summarizing the the latest biorefining technology and the fermentation platform design of agarose, alginate, and other polysaccharides. This information will provide new research directions and solutions for the biotransformation and utilization of marine macroalgae.

Evolving strategies for marine enzyme engineering: recent advances on the molecular modification of alginate lyase

Alginate, an acidic polysaccharide, is formed by β-d-mannuronate (M) and α-l-guluronate (G). As a type of polysaccharide lyase, alginate lyase can efficiently degrade alginate into alginate oligosaccharides, having potential applications in the food, medicine, and agriculture fields. However, the application of alginate lyase has been limited due to its low catalytic efficiency and poor temperature stability. In recent years, various structural features of alginate lyase have been determined, resulting in modification strategies that can increase the applicability of alginate lyase, making it important to summarize and discuss the current evidence. In this review, we summarized the structural features and catalytic mechanisms of alginate lyase. Molecular modification strategies, such as rational design, directed evolution, conserved domain recombination, and non-catalytic domain truncation, are also described in detail. Lastly, the application of alginate lyase is discussed. This comprehensive summary can inform future applications of alginate lyases.

Comparison of Biochemical Characteristics, Action Models, and Enzymatic Mechanisms of a Novel Exolytic and Two Endolytic Lyases with Mannuronate Preference

Recent explorations of tool-like alginate lyases have been focused on their oligosaccharide-yielding properties and corresponding mechanisms, whereas most were reported as endo-type with α-L-guluronate (G) preference. Less is known about the β-D-mannuronate (M) preference, whose commercial production and enzyme application is limited. In this study, we elucidated Aly6 of Flammeovirga sp. strain MY04 as a novel M-preferred exolytic bifunctional lyase and compared it with AlgLs of Pseudomonas aeruginosa (Pae-AlgL) and Azotobacter vinelandii (Avi-AlgL), two typical M-specific endolytic lyases. This study demonstrated that the AlgL and heparinase_II_III modules play indispensable roles in determining the characteristics of the recombinant exo-type enzyme rAly6, which is preferred to degrade M-enriched substrates by continuously cleaving various monosaccharide units from the nonreducing end, thus yielding various size-defined ΔG-terminated oligosaccharides as intermediate products. By contrast, the endolytic enzymes Pae-rAlgL and Avi-rAlgL varied their action modes specifically against M-enriched substrates and finally degraded associated substrate chains into various size-defined oligosaccharides with a succession rule, changing from ΔM to ΔG-terminus when the product size increased. Furthermore, site-directed mutations and further protein structure tests indicated that H¹⁹⁵NHSTW is an active, half-conserved, and essential enzyme motif. This study provided new insights into M-preferring lyases for novel resource discoveries, oligosaccharide preparations, and sequence determinations.

Treating Bacterial Infections with Bacteriophage-Based Enzybiotics: In Vitro, In Vivo and Clinical Application

Over the past few decades, we have witnessed a surge around the world in the emergence of antibiotic-resistant bacteria. This global health threat arose mainly due to the overuse and misuse of antibiotics as well as a relative lack of new drug classes in development pipelines. Innovative antibacterial therapeutics and strategies are, therefore, in grave need. For the last twenty years, antimicrobial enzymes encoded by bacteriophages, viruses that can lyse and kill bacteria, have gained tremendous interest. There are two classes of these phage-derived enzymes, referred to also as enzybiotics: peptidoglycan hydrolases (lysins), which degrade the bacterial peptidoglycan layer, and polysaccharide depolymerases, which target extracellular or surface polysaccharides, i.e., bacterial capsules, slime layers, biofilm matrix, or lipopolysaccharides. Their features include distinctive modes of action, high efficiency, pathogen specificity, diversity in structure and activity, low possibility of bacterial resistance development, and no observed cross-resistance with currently used antibiotics. Additionally, and unlike antibiotics, enzybiotics can target metabolically inactive persister cells. These phage-derived enzymes have been tested in various animal models to combat both Gram-positive and Gram-negative bacteria, and in recent years peptidoglycan hydrolases have entered clinical trials. Here, we review the testing and clinical use of these enzymes.

Structure Characteristics, Biochemical Properties, and Pharmaceutical Applications of Alginate Lyases

Alginate, the most abundant polysaccharides of brown algae, consists of various proportions of uronic acid epimers α-L-guluronic acid (G) and β-D-mannuronic acid (M). Alginate oligosaccharides (AOs), the degradation products of alginates, exhibit excellent bioactivities and a great potential for broad applications in pharmaceutical fields. Alginate lyases can degrade alginate to functional AOs with unsaturated bonds or monosaccharides, which can facilitate the biorefinery of brown algae. On account of the increasing applications of AOs and biorefinery of brown algae, there is a scientific need to explore the important aspects of alginate lyase, such as catalytic mechanism, structure, and property. This review covers fundamental aspects and recent developments in basic information, structural characteristics, the structure-substrate specificity or catalytic efficiency relationship, property, molecular modification, and applications. To meet the needs of biorefinery systems of a broad array of biochemical products, alginate lyases with special properties, such as salt-activated, wide pH adaptation range, and cold adaptation are outlined. Withal, various challenges in alginate lyase research are traced out, and future directions, specifically on the molecular biology part of alginate lyases, are delineated to further widen the horizon of these exceptional alginate lyases.

Purification and Characterization of a Novel Alginate Lyase from a Marine Streptomyces Species Isolated from Seaweed

Alginate, a natural polysaccharide derived from brown seaweed, is finding multiple applications in biomedicine via its transformation through chemical, physical, and, increasingly, enzymatic processes. In this study a novel alginate lyase, AlyDS44, was purified and characterized from a marine actinobacterium, Streptomyces luridiscabiei, which was isolated from decomposing seaweed. The purified enzyme had a specific activity of 108.6 U/mg, with a molecular weight of 28.6 kDa, and was composed of 260 amino acid residues. AlyDS44 is a bifunctional alginate lyase, active on both polyguluronate and polymannuronate, though it preferentially degrades polyguluronate. The optimal pH of this enzyme is 8.5 and the optimal temperature is 45 °C. It is a salt-tolerant alginate lyase with an optimal activity at 0.6 M NaCl. Metal ions Mn²⁺, Co²⁺, and Fe²⁺ increased the alginate degrading activity, but it was inhibited in the presence of Zn²⁺ and Cu²⁺. The highly conserved regions of its amino acid sequences indicated that AlyDS44 belongs to the polysaccharide lyase family 7. The main breakdown products of the enzyme on alginate were disaccharides, trisaccharides, and tetrasaccharides, which demonstrated that this enzyme acted as an endo-type alginate lyase. AlyDS44 is a novel enzyme, with the potential for efficient production of alginate oligosaccharides with low degrees of polymerization.

Alginate degrading enzymes: an updated comprehensive review of the structure, catalytic mechanism, modification method and applications of alginate lyases

Alginate, a kind of linear acidic polysaccharide, consists of α-L-guluronate (G) and β-D-mannuronate (M). Both alginate and its degradation products (alginate oligosaccharides) possess abundant biological activities such as antioxidant activity, antitumor activity, and antimicrobial activity. Therefore, alginate and alginate oligosaccharides have great value in food, pharmaceutical, and agricultural fields. Alginate lyase can degrade alginate into alginate oligosaccharides via the β-elimination reaction. It plays an important role in marine carbon recycling and the deep utilization of brown algae. Elucidating the structural features of alginate lyase can improve our knowledge of its catalytic mechanisms. With the development of structural analysis techniques, increasing numbers of alginate lyases have been characterized at the structural level. Hence, it is essential and helpful to summarize and discuss the up-to-date findings. In this review, we have summarized progress on the structural features and the catalytic mechanisms of alginate lyases. Furthermore, the molecular modification strategies and the applications of alginate lyases have also been discussed. This comprehensive information should be helpful to expand the applications of alginate lyases.

Alginate derived functional oligosaccharides: Recent developments, barriers, and future outlooks

Alginate is a biopolymer used extensively in the food, pharmaceutical, and chemical industries. Alginate oligosaccharides (AOS) derived from alginate exhibit superior biological activities and therapeutic potential. Alginate lyases with characteristic substrate specificity can facilitate the production of a broad array of AOS with precise structure and functionality. By adopting innovative analytical tools in conjunction with focused clinical studies, the structure-bioactivity relationship of a number of AOS has been brought to light. This review covers fundamental aspects and recent developments in AOS research. Enzymatic and microbial processes involved in AOS production from brown algae and sequential steps involved in AOS structure elucidation are outlined. Biological mechanisms underlying the health benefits of AOS and their potential industrial and therapeutic applications are elaborated. Withal, various challenges in AOS research are traced out, and future directions, specifically on recombinant systems for AOS preparation, are delineated to further widen the horizon of these exceptional oligosaccharides.

Characterization of a New Biofunctional, Exolytic Alginate Lyase from Tamlana sp. s12 with High Catalytic Activity and Cold-Adapted Features

Alginate, a major acidic polysaccharide in brown algae, has attracted great attention as a promising carbon source for biorefinery systems. Alginate lyases, especially exo-type alginate lyase, play a critical role in the biorefinery process. Although a large number of alginate lyases have been characterized, few can efficiently degrade alginate comprised of mannuronate (M) and guluronate (G) at low temperatures by means of an exolytic mode. In this study, the gene of a new exo-alginate lyase-Alys1-with high activity (1350 U/mg) was cloned from a marine strain, Tamlana sp. s12. When sodium alginate was used as a substrate, the recombinant enzyme showed optimal activity at 35 °C and pH 7.0-8.0. Noticeably, recombinant Alys1 was unstable at temperatures above 30 °C and had a low melting temperature of 56.0 °C. SDS and EDTA significantly inhibit its activity. These data indicate that Alys1 is a cold-adapted enzyme. Moreover, the enzyme can depolymerize alginates polyM and polyG, and produce a monosaccharide as the minimal alginate oligosaccharide. Primary substrate preference tests and identification of the final oligosaccharide products demonstrated that Alys1 is a bifunctional alginate lyase and prefers M to G. These properties make Alys1 a valuable candidate in both basic research and industrial applications.

Engineering Vibrio sp. SP1 for the production of carotenoids directly from brown macroalgae

Macroalgae is regarded as a promising third-generation marine biomass that can be utilized as a sustainable feedstock for bio-industry due to the high sugar level and absence of lignin. Alginate, composed of 1,4-linked D-mannuronate (M) and L-guluronate (G), is one of the major carbohydrates in brown macroalgae. It is difficult to be assimilated by most industrial microorganisms. Therefore, developing engineered microorganisms that can utilize alginate as a feedstock in order to produce natural products from marine biomass is critical. In this study, we isolated, characterized, and sequenced Vibrio sp. SP1 which rapidly grows using alginate as a sole carbon source. We further engineered this strain by introducing genes encoding enzymes under the control of synthetic expression cassettes to produce lycopene and β-carotene which are attractive phytochemicals owing to the antioxidant property. We confirmed that the engineered Vibrio sp. SP1 could successfully produce 2.13 ± 0.37 mg L-1 of lycopene, 2.98 ± 0.43 mg L-1 of β -carotene, respectively, from 10 g L-1 of alginate as a sole carbon source. Furthermore, our engineered strain could directly convert 60 g L-1 of brown macroalgae Sargassum fusiforme into 1.23 ± 0.21 mg L-1 of lycopene without any pretreatment which had been vitally required for the previous productions. As the first demonstrated strain to produce high-value product from Sargassum, Vibrio sp. SP1 is evaluated to be a desirable platform for the brown macroalgae-based biorefinery.

Preparation of low-molecular-weight sodium alginate by ozonation

Low-molecular-weight sodium alginate (LMWSA) has been reported to possess unique physicochemical properties and bioactivities. There is little information available about degradation of sodium alginate by ozonation. Effect of ozonation on molecular weight, molecular weight distribution, color change, M/G ratio, and chemical structure of sodium alginate was investigated. The molecular weight of sodium alginate decreased from 972.3 to 76.7 kDa in the 80-min period of ozonation at 25 °C. Two different degradation-rate constants were calculated. Molecular weight distribution of the LMWSA changed appreciably. Ozonation cannot lead to color change of LMWSA. The M/G ratio of LMWSA was not altered significantly, compared with that of the original alginate. The FT-IR and ¹³C NMR spectra indicated the chemical structure of LMWSA obtained by ozonation was not altered appreciably. New insight into the ozonation of alginate will be promisingly opened up. Ozonation of sodium alginate can be a alternative for production of LMWSA.

Characterization of an organic solvent-tolerant polysaccharide lyase from Microbulbifer thermotolerans DAU221

Alginate and its derivatives are annually produced approximately 30,000 tons or more and are applied to various industries as they are natural polymers. The global market for alginate and its derivatives has been growing steadily. There is little research compared to other enzymes produced through biomass degradation or modification. An alginate lyase, MtAl138, from Microbulbifer thermotolerans DAU221 was cloned and identified in Escherichia coli BL21 (DE3). MtAl138 contains a highly conserved motif (R⁵³⁸TELR, Q⁶⁰⁷IH⁶⁰⁹, and YFKAGVY⁷¹⁶NQ), which indicates that it belongs to the polysaccharide lyase family 7 (PL7). MtAl138, with a molecular weight of 77 kDa worked optimally at 45 °C and pH 7.4. MtAl138 showed twice as much activity as when there was no NaCl when there was between 100 and 600 mM NaCl. Moreover, its activity increased in organic solvents such as benzene, hexane, methanol, and toluene. Based on the thin layer chromatography analyses, MtAl38 is an endo-type enzyme that produces di-, tri-, or tetrasaccharides from polyG and polyM. This study provided that MtAl138 is an endoenzyme that showed outstanding enzymatic activity at concentrated salt solutions and organic solvents, which makes it a reasonably attractive enzyme for use in various industries.

Construction and biochemical characterization of a novel hybrid alginate lyase with high activity by module recombination to prepare alginate oligosaccharides

Alginate lyases are essential tools to prepare alginate oligosaccharides with various biological activities. However, alginate lyases with excellent properties such as high activity and good thermal stability are still in shortage. Therefore, it is crucial to exploit new alginate lyases with high activity and polysaccharide-degrading efficiency for alginate oligosaccharide preparation. Herein, we proposed to construct a novel hybrid alginate lyase with improved property by module recombination. The hybrid alginate lyase, designated as Aly7C, was successfully constructed by recombining the carbohydrate binding module (CBM) of Aly7A with the catalytic module of Aly7B. Interestingly, the hybrid enzyme Aly7C exhibited higher activity than the catalytic domain. Moreover, it could degrade sodium alginate, polyM and polyG into oligosaccharides with degrees of polymerization (Dps) 2-5, which exhibit perfect product specificity. This work provides a new insight into well-defined generation of alginate oligosaccharides with associated CBMs and enhances the understanding of functions of the modules.

Oligosaccharide is a promising natural preservative for improving postharvest preservation of fruit: A review

Lack of proper postharvest management of fruits causes huge economic loss, increase poverty, hunger and malnutrition. To reduce postharvest losses, globally different postharvest technologies and synthetic chemical treatments were widely used, but some of them are reported to enhance the risk for human health and environment. Recently, oligosaccharides have attractedmuch attention because of their numerous health benefits, and potential applications in agriculture. Many previous reports demonstrated that oligosaccharides treatment improves the postharvest preservation of fruits and extend the shelf life. Oligosaccharides postharvest treatments maintained higher non enzymatic antioxidant activity, increased antioxidant activity, regulate hormone biosynthesis and delayed cell wall degradation. In this review, we systematically summarize and discuss the recent research findings concerning the preservation effects of different oligosaccharides, and their mechanism underlying delaying ripening and senescence of fruits during postharvest storage. Moreover, we provide future research direction for the utilization of oligosaccharides to improve postharvest preservation of fruits.

Characterization of a New Bifunctional and Cold-Adapted Polysaccharide Lyase (PL) Family 7 Alginate Lyase from Flavobacterium sp

Alginate oligosaccharides produced by enzymatic degradation show versatile physiological functions and biological activities. In this study, a new alginate lyase encoding gene alyS02 from Flavobacterium sp. S02 was recombinantly expressed at a high level in Yarrowia lipolytica, with the highest extracellular activity in the supernatant reaching 36.8 ± 2.1 U/mL. AlyS02 was classified in the polysaccharide lyase (PL) family 7. The optimal reaction temperature and pH of this enzyme were 30 °C and 7.6, respectively, indicating that AlyS02 is a cold-adapted enzyme. Interestingly, AlyS02 contained more than 90% enzyme activity at 25 °C, higher than other cold-adapted enzymes. Moreover, AlyS02 is a bifunctional alginate lyase that degrades both polyG and polyM, producing di- and trisaccharides from alginate. These findings suggest that AlyS02 would be a potent tool for the industrial applications.

Isolation, identification, and whole genome sequence analysis of the alginate-degrading bacterium Cobetia sp. cqz5-12

Alginate-degrading bacteria or alginate lyases can be used to oligomerize alginate. In this study, an alginate-degrading bacterium with high alginolytic activity was successfully screened by using Sargassum fusiforme sludge. When the strain was grown on a plate containing sodium alginate, the transparent ring diameter (D) was 2.2 cm and the ratio (D/d) of transparent ring diameter to colony diameter (d) was 8.8. After 36 h in culture at a temperature of 28 °C shaken at 150 r/min, the enzymatic activity of the fermentation supernatant reached 160 U/mL, and the enzymatic activity of the bacterial precipitate harvested was 2,645 U/mL. The strain was named Cobetia sp. cqz5-12. Its genome is circular in shape, 4,209,007 bp in size, with a 62.36% GC content. It contains 3,498 predicted coding genes, 72 tRNA genes, and 21 rRNA genes. The functional annotations for the coding genes demonstrated that there were 181 coding genes in the genome related to carbohydrate transport and metabolism and 699 coding genes with unknown functions. Three putative coding genes, alg2107, alg2108 and alg2112, related to alginate degradation were identified by analyzing the carbohydrate active enzyme (CAZy) database. Moreover, proteins Alg2107 and Alg2112 were successfully expressed and exhibited alginate lyase activity.

Expression and Characterization of an Alginate Lyase and Its Thermostable Mutant in Pichia pastoris

Alginate is one of the most abundant polysaccharides in algae. Alginate lyase degrades alginate through a β-elimination mechanism to produce alginate oligosaccharides with special bioactivities. Improving enzyme activity and thermal stability can promote the application of alginate lyase in the industrial preparation of alginate oligosaccharides. In this study, the recombinant alginate lyase cAlyM and its thermostable mutant 102C300C were expressed and characterized in Pichia pastoris. The specific activities of cAlyM and 102C300C were 277.1 U/mg and 249.6 U/mg, respectively. Both enzymes showed maximal activity at 50 °C and pH 8.0 and polyG preference. The half-life values of 102C300C at 45 °C and 50 °C were 2.6 times and 11.7 times the values of cAlyM, respectively. The degradation products of 102C300C with a lower degree of polymerization contained more guluronate. The oligosaccharides with a polymerization degree of 2–4 were the final hydrolytic products. Therefore, 102C300C is potentially valuable in the production of alginate oligosaccharides with specific M/G ratio and molecular weights.

Biochemical characteristics and molecular mechanism of an exo-type alginate lyase VxAly7D and its use for the preparation of unsaturated monosaccharides

BACKGROUND

As the most abundant polysaccharide in brown algae, alginate has become a promising economical material for bioethanol production. Recently, exo-type alginate lyases have received extensive attention because the unsaturated monosaccharides produced by their degradation of alginate can be easily converted into 4-deoxy-l-erythro-5-hexoseulose uronate (DEH), a promising material for bioethanol production and biorefinery systems.

RESULTS

In this study, we cloned and characterized an exo-type polysaccharide lyase family 7 (PL7) alginate lyase VxAly7D from the marine bacterium Vibrio xiamenensis QY104. Recombinant VxAly7D was most active at 30 °C and exhibited 21%, 46% and 90% of its highest activity at 0, 10 and 20 °C, respectively. Compared with other exo-type alginate lyases, recombinant VxAly7D was shown to be a bifunctional alginate lyase with higher specific activity towards sodium alginate, polyG and polyM (462.4 ± 0.64, 357.37 ± 0.53 and 441.94 ± 2.46 U/mg, respectively). A total of 13 μg recombinant VxAly7D could convert 3 mg sodium alginate to unsaturated monosaccharides in 1 min with a yield of 37.6%, and the yield reached 95% in 1 h. In addition, the three-dimensional structure of VxAly7D was modelled using the crystal structure of AlyA5 from Zobellia galactanivorans DsijT as the template. The action mode and the end products of the W295A mutant revealed that Trp295 is a key amino acid residue responsible for the exolytic action mode of VxAly7D.

CONCLUSION

Overall, our results show that VxAly7D is a PL7 exo-type alginate lyase with high activity and a high conversion rate at low/moderate temperatures, which provides a useful enzymatic tool for the development of biofuel production from brown algae and enriches the understanding of the structure and functional relationships of polysaccharide lyases.

Biochemical characterization and degradation pattern analysis of a novel PL-6 alginate lyase from Streptomyces coelicolor A3(2)

Alginate is the main component of brown algae which contributes to a huge biomass. The alginate oligosaccharides (AOs) have been widely used in food, cosmetic and pharmaceutical industries due to their various physiological activities. In this study, we expressed and characterized a novel PL-6 alginate lyase, named OUC-ScCD6. The results indicated that OUC-ScCD6 showed highest activity at 50 °C and pH 9.0. OUC-ScCD6 prefers to degrade poly M blocks and could digest poly G blocks as well. Endolytic action mode towards polysaccharides contributes to the creation of AOs with the degrees of polymerization 2-6. Degradation towards saturated oligosaccharides showed that saturated trisaccharides (M3 and G3) were minimum identifiable substrates. Furthermore, OUC-ScCD6 shows an even-numbered glycosidic bonds preference from non-reducing end which provided clearer insights into the substrate recognition and action mode of PL-6 family alginate lyases.