Toxicological effects of a cationic clay, montmorillonite in vitro and in vivo

Biocompatibility of nano/micro-sized pyrophyllite particles by pulmo, liver, kidney and gastric mucosis cells

Pyrophyllite is the least studied natural clay in terms of its potential in biomedical applications, although there are many deposits of this aluminosilicate around the world. Genotoxicity study was performed in vitro for this mineral. Subsequently, Wister rats were exposed to the pyrophyllite micronized to below 100 µm. After the exposure period, histology of the lung, liver, kidney and gastric tissues were performed, followed by the stereological and hematological analysis. The physicochemical analyses revealed typical XRD characteristics of pyrophyllite clay with particle-size distribution ranging 50 nm-100 μm with stable mineral composition and unique buffering property to pH around 8. The results showed that there were no cytotoxic effects on to THP-1 cells, or genotoxicity of pyrophyllite measured by the Comet assay. In vivo studies are accompanied by the thorough physicochemical characterization of the micronized pyrophyllite. Histology of the lung tissue proved presence of an inflammatory reaction. On the other hand, gastric tissue has shown the selective accumulation of nanoparticles in enterocytes of the stomach only, as supported by ultrastructural analysis. Liver and kidney tissues have shown tolerability for pyrophyllite particles. The results give directions for further comprehensive studies of potential biomedical applications of the pyrophyllite.

Exploring the Potential of Montmorillonite as an Antiproliferative Nanoagent against MDA-MB-231 and MCF-7 Human Breast Cancer Cells

Unlike MCF-7 cells, MDA-MB-231 cells are unresponsive to hormone therapy and often show resistance to chemotherapy and radiotherapy. Here, the antiproliferative effect of biocompatible montmorillonite (Mt) nanosheets on MDA-MB-231 and MCF-7 human breast cancer cells was evaluated by MTT assay, flow cytometry, and qRT-PCR. The results showed that the Mt IC50 for MDA-MB-231 and MCF-7 cells in a fetal bovine serum (FBS)-free medium was ~50 and ~200 µg/mL, and in 10% FBS medium ~400 and ~2000 µg/mL, respectively. Mt caused apoptosis in both cells by regulating related genes including Cas-3, P53, and P62 in MDA-MB-231 cells and Bcl-2, Cas-8, Cas-9, P53, and P62 in MCF-7 cells. Also, Mt arrested MCF-7 cells in the G0/G1 phase by altering Cyclin-D1 and P21 expression, and caused sub-G1 arrest and necrosis in both cells, possibly through damaging the mitochondria. However, fewer gene expression changes and more sub-G1 arrest and necrosis were observed in MDA-MB-231 cells, confirming the higher vulnerability of MDA-MB-231 cells to Mt. Furthermore, MDA-MB-231 cells appeared to be much more vulnerable to Mt compared to other cell types, including normal lung fibroblast (MRC-5), colon cancer (HT-29), and liver cancer (HepG2) cells. The higher vulnerability of MDA-MB-231 cells to Mt was inferred to be due to their higher proliferation rate. Notably, Mt cytotoxicity was highly dependent on both the Mt concentration and serum level, which favors Mt for the local treatment of MDA-MB-231 cells. Based on these results, Mt can be considered as an antiproliferative nanoagent against MDA-MB-231 cells and may be useful in the development of local nanoparticle-based therapies.

Physicochemical properties and micro-interaction between micro-nanoparticles and anterior corneal multilayer biological interface film for improving drug delivery efficacy: the transformation of tear film turnover mode

Recently, various novel drug delivery systems have been developed to overcome ocular barriers in order to improve drug efficacy. We have previously reported that montmorillonite (MT) microspheres (MPs) and solid lipid nanoparticles (SLNs) loaded with the anti-glaucoma drug betaxolol hydrochloride (BHC) exhibited sustained drug release and thus intraocular pressure (IOP) lowering effects. Here, we investigated the effect of physicochemical particle parameters on the micro-interactions with tear film mucins and corneal epithelial cells. Results showed that the MT-BHC SLNs and MT-BHC MPs eye drops significantly prolonged the precorneal retention time due to their higher viscosity and lower surface tension and contact angle compared with the BHC solution, with MT-BHC MPs exhibiting the longest retention due to their stronger hydrophobic surface. The cumulative release of MT-BHC SLNs and MT-BHC MPs was up to 87.78% and 80.43% after 12 h, respectively. Tear elimination pharmacokinetics study further confirmed that the prolonged precorneal retention time of the formulations was due to the micro-interaction between the positively charged formulations and the negatively charged tear film mucins. Moreover, the area under the IOP reduction curve (AUC) of MT-BHC SLNs and MT-BHC MPs was 1.4 and 2.5 times that of the BHC solution. Accordingly, the MT-BHC MPs also exhibit the most consistent and long-lasting IOP-lowering effect. Ocular irritation experiments showed no significant toxicity of either. Taken together, MT MPs may have the potential for more effective glaucoma treatment.

Layered Clay Minerals in Cancer Therapy: Recent Progress and Prospects

Cancer is one of the deadliest diseases, and current treatment regimens suffer from limited efficacy, nonspecific toxicity, and chemoresistance. With the advantages of good biocompatibility, large specific surface area, excellent cation exchange capacity, and easy availability, clay minerals have been receiving ever-increasing interests in cancer treatment. They can act as carriers to reduce the toxic side effects of chemotherapeutic drugs, and some of their own properties can kill cancer cells, etc. Compared with other morphologies clays, layered clay minerals (LCM) have attracted more and more attention due to adjustable interlayer spacing, easier ion exchange, and stronger adsorption capacity. In this review, the structure, classification, physicochemical properties, and functionalization methods of LCM are summarized. The state-of-the-art progress of LCM in antitumor therapy is systematically described, with emphasis on the application of montmorillonite, kaolinite, and vermiculite. Furthermore, the property-function relationships of LCM are comprehensively illustrated to reveal the design principles of clay-based antitumor systems. Finally, foreseeable challenges and outlook in this field are discussed.

Hemolytic Activity and Cytotoxicity of Synthetic Nanoclays with Montmorillonite Structure for Medical Applications

The factors influencing the appearance of toxicity in samples of synthetic montmorillonite with a systematically changing chemical composition Na_x(Al, Mg)_2-3Si₄O₁₀(OH)₂ nH₂O, which are potentially important for their use in medicine as drug carriers, targeted drug delivery systems, entero- and hemosorbents have been studied. Samples synthesized under hydrothermal conditions had the morphology of nanolayers self-organized into the nanosponge structures. The effect of the aluminum content, particle sizes, porosity, and ζ-potential of the samples on their toxicity was studied. The cytotoxic effect of the samples on eukaryotic cells Ea. hy 926 was determined using the MTT assay. The hemolytic activity of the samples in the wide concentration range in relation to human erythrocytes was also estimated. It has been established that the toxicity of aluminosilicate nanoparticles can be significantly reduced by correctly selecting their synthesis conditions and chemical composition, which opens up the opportunities for their use in medicine.

Application of Inorganic Nanomaterials in Cultural Heritage Conservation, Risk of Toxicity, and Preventive Measures

Nanotechnology has allowed for significant progress in architectural, artistic, archaeological, or museum heritage conservation for repairing and preventing damages produced by deterioration agents (weathering, contaminants, or biological actions). This review analyzes the current treatments using nanomaterials, including consolidants, biocides, hydrophobic protectives, mechanical resistance improvers, flame-retardants, and multifunctional nanocomposites. Unfortunately, nanomaterials can affect human and animal health, altering the environment. Right now, it is a priority to stop to analyze its advantages and disadvantages. Therefore, the aims are to raise awareness about the nanotoxicity risks during handling and the subsequent environmental exposure to all those directly or indirectly involved in conservation processes. It reports the human-body interaction mechanisms and provides guidelines for preventing or controlling its toxicity, mentioning the current toxicity research of main compounds and emphasizing the need to provide more information about morphological, structural, and specific features that ultimately contribute to understanding their toxicity. It provides information about the current documents of international organizations (European Commission, NIOSH, OECD, Countries Normative) about worker protection, isolation, laboratory ventilation control, and debris management. Furthermore, it reports the qualitative risk assessment methods, management strategies, dose control, and focus/receptor relationship, besides the latest trends of using nanomaterials in masks and gas emissions control devices, discussing their risk of toxicity.

Raw and Purified Clay Minerals for Drug Delivery Applications

In this study, the aim was to prepare drug-releasing clay mineral particles using raw (CaMt) and purified (PMt) montmorillonite and to compare and determine the effects of purification on the properties of montmorillonite. Montmorillonite clay minerals are used in several pharmaceutical and cosmetic products due to their many favorable properties, such as cation exchange capacity, adsorption capability, high specific surface area, and biocompatibility. Recently, several types of clay minerals have been widely studied for drug delivery applications due to their unique properties. The purification of montmorillonite is considered as a potentially useful step which may decrease the toxicity of impurities but which may increase the adsorption capacity of the montmorillonite. However, the effects on the toxicity and drug-release properties of purified montmorillonite have never been compared to that of raw montmorillonite. Montmorillonite was purified through decomposition of carbonates, dissolution of hydroxides, oxidation of organic materials, dialysis, and sedimentation. The raw and the purified montmorillonite were characterized using XRD, FTIR, and cation exchange capacities. Then, the cytotoxicity of raw and purified montmorillonite on normal hFOB cells was investigated to assess their biocompatibility in vitro. Finally, the efficacy of montmorillonite as a drug-delivering agent was investigated in vitro using cytotoxicity assays with the MCF7 cell line. The antitumor drug doxorubicin was loaded onto particles through electrostatic forces at 97.99% for CaMt and 96.79% for PMt. The drug-loading efficiency and release behavior of both clay minerals were determined. Results showed that both raw and purified montmorillonite did not significantly reduce the viability of normal cells at low concentrations (<500 μg/mL). At high concentrations, both raw and purified montmorillonite showed significant toxicity and the effect of impurities on toxicity were also more pronounced. Although drug loading was successful for both clay minerals there were differences in their controlled drug-release behavior. Doxorubicin-loaded raw and purified clay minerals significantly reduced MCF7 cell viability similar to pure DOX.

Nano-Clays for Cancer Therapy: State-of-the Art and Future Perspectives

To date, cancer continues to be one of the deadliest diseases. Current therapies are often ineffective, leading to the urgency to develop new therapeutic strategies to improve treatments. Conventional chemotherapeutics are characterized by a reduced therapeutic efficacy, as well as them being responsible for important undesirable side effects linked to their non-specific toxicity. In this context, natural nanomaterials such as clayey mineral nanostructures of various shapes (flat, tubular, spherical and fibrous) with adjustable physico-chemical and morphological characteristics are emerging as systems with extraordinary potential for the delivery of different therapeutic agents to tumor sites. Thanks to their submicron size, high specific surface area, high adsorption capacity, chemical inertia and multilayer organization of 0.7 to 1 nm-thick sheets, they have aroused considerable interest among the scientific community as nano systems that are highly biocompatible in cancer therapy. In oncology, the nano-clays usually studied are halloysite, bentonite, laponite, kaolinite, montmorillonite and sepiolite. These are multilayered minerals that can act as nanocarriers (with a drug load generally between 1 and 10% by weight) for improved stabilization, efficient transport and the sustained and controlled release of a wide variety of anticancer agents. In particular, halloysite, montmorillonite and kaolinite are used to improve the dissolution of therapeutic agents and to delay and/or direct their release. In this review, we will examine and expose to the scientific community the extraordinary potential of nano-clays as unique crystalline systems in the treatment of cancer.

Design of advanced separators for high performance Li-S batteries using natural minerals with 1D to 3D microstructures

Lithium-sulfur (Li-S) batteries are of great interest due to their high energy density. However, polysulfides shuttle and low S loading severely impede their practical applications. Here, we report design of advanced separators for Li-S batteries using natural minerals with 1D to 3D microstructures. Four natural minerals with different microstructures including 1D halloysite nanotubes, 1D attapulgite nanorods, 2D Li⁺-montmorillonite (Mmt) nanosheets and 3D porous diatomite were used together with carbon black (CB) for preparation of the mineral/CB-Celgard separators. The Si-OH groups of the minerals act as Lewis acid sites, which could effectively absorb polysulfides by forming LiO and OS bonds with polysulfides. Among all the separators, the Mmt/CB-Celgard separator endowed the Li-S battery with the highest upper plateau discharge capacity (369 mA h g^-1), initial reversible capacity (1496 mA h g^-1 at 0.1 C), rate performance and cycling stability (666 mA h g^-1 after 500 cycles at 1.0 C with 0.046% capacity decay per cycle). The Mmt/CB-Celgard separator also enabled stable cycling of the Li-S battery with high S loading (8.3 mg cm^-2) cathode. This work will provide inspiration for future development of advanced separators for high-energy-density Li-S batteries.

Comprehensive Review on the Interactions of Clay Minerals With Animal Physiology and Production

Clay minerals are naturally occurring rock and soil materials primarily composed of fine-grained aluminosilicate minerals, characterized by high hygroscopicity. In animal production, clays are often mixed with feed and, due to their high binding capacity towards organic molecules, used to limit animal absorption of feed contaminants, such as mycotoxins and other toxicants. Binding capacity of clays is not specific and these minerals can form complexes with different compounds, such as nutrients and pharmaceuticals, thus possibly affecting the intestinal absorption of important substances. Indeed, clays cannot be considered a completely inert feed additive, as they can interfere with gastro-intestinal (GI) metabolism, with possible consequences on animal physiology. Moreover, clays may contain impurities, constituted of inorganic micronutrients and/or toxic trace elements, and their ingestion can affect animal health. Furthermore, clays may also have effects on the GI mucosa, possibly modifying nutrient digestibility and animal microbiome. Finally, clays may directly interact with GI cells and, depending on their mineral grain size, shape, superficial charge and hydrophilicity, can elicit an inflammatory response. As in the near future due to climate change the presence of mycotoxins in feedstuffs will probably become a major problem, the use of clays in feedstuff, given their physico-chemical properties, low cost, apparent low toxicity and eco-compatibility, is expected to increase. The present review focuses on the characteristics and properties of clays as feed additives, evidencing pros and cons. Aims of future studies are suggested, evidencing that, in particular, possible interferences of these minerals with animal microbiome, nutrient absorption and drug delivery should be assessed. Finally, the fate of clay particles during their transit within the GI system and their long-term administration/accumulation should be clarified.

Two-dimensional nanomaterials-added dynamism in 3D printing and bioprinting of biomedical platforms: Unique opportunities and challenges

The nanomaterials research spectrum has seen the continuous emergence of two-dimensional (2D) materials over the years. These highly anisotropic and ultrathin materials have found special attention in developing biomedical platforms for therapeutic applications, biosensing, drug delivery, and regenerative medicine. Three-dimensional (3D) printing and bioprinting technologies have emerged as promising tools in medical applications. The convergence of 2D nanomaterials with 3D printing has extended the application dynamics of available biomaterials to 3D printable inks and bioinks. Furthermore, the unique properties of 2D nanomaterials have imparted multifunctionalities to 3D printed constructs applicable to several biomedical applications. 2D nanomaterials such as graphene and its derivatives have long been the interest of researchers working in this area. Beyond graphene, a range of emerging 2D nanomaterials, such as layered silicates, black phosphorus, transition metal dichalcogenides, transition metal oxides, hexagonal boron nitride, and MXenes, are being explored for the multitude of biomedical applications. Better understandings on both the local and systemic toxicity of these materials have also emerged over the years. This review focuses on state-of-art 3D fabrication and biofabrication of biomedical platforms facilitated by 2D nanomaterials, with the comprehensive summary of studies focusing on the toxicity of these materials. We highlight the dynamism added by 2D nanomaterials in the printing process and the functionality of printed constructs.

An in vitro assessment of the toxicity of two-dimensional synthetic and natural layered silicates

Natural Layered Silicates (NLS) and Synthetic Layered Silicates (SLS) are a diverse group of clay minerals that have attracted great interest in various branches of industry. However, despite growing demand for this class of material, their impact on human health has not been fully investigated. Therefore, the aim of this study was to evaluate and compare the potential toxic effects of a wide range of commercially available SLS and NLS of varying physicochemical properties (lithium (Li) or fluoride (F) content and size). Mouse BALB/c monocyte macrophage (J774A.1) and human monocyte-derived macrophages (MDMs) were chosen as in vitro models of alveolar macrophages. Montmorillonite, hectorite, Medium (med) F/High Li and Low F/Med Li particles, were cytotoxic to cells and induced potent pro-inflammatory responses. The remaining particles (No F/Very (V)Low Li, No F/Med Li, No F/Low Li, High F/Med Li and High F/Med Li washed) were non- to relatively low- cytotoxic and inflammogenic, in both type of cells. In an acellular condition none of the tested samples increased reactive oxygen species (ROS), while ROS generation was observed following exposure to sublethal concentrations of Med F/High Li, Low F/Med Li, montmorillonite and hectorite samples, in J774A.1 cells. Based on the results obtained in this study the toxic potency of tested samples was not associated with lithium or fluoride content, but appeared to be dependent on particle size, with the platelets of larger dimension and lower surface area being more potent than the smaller platelet particles with higher surface area. In addition, the increased bioactivity of Med F/High Li and Low F/Med Li was associated with endotoxin contamination. Obtained results demonstrated that layered silicate materials have different toxicological profiles and suggest that toxicological properties of a specific layered silicate should be investigated on an individual basis.

Rheological modification of partially oxidised cellulose nanofibril gels with inorganic clays

This study aimed to quantify the influence of clays and partially oxidised cellulose nanofibrils (OCNF) on gelation as well as characterise their physical and chemical interactions. Mixtures of Laponite and montmorillonite clays with OCNF form shear-thinning gels that are more viscous across the entire shear range than OCNF on its own. Viscosity and other rheological properties can be fine-tuned using different types of clay at different concentrations (0.5-2 wt%). Laponite particles are an order of magnitude smaller than those of montmorillonite (radii of 150 Å compared to 2000 Å) and are therefore able to facilitate networking of the cellulose fibrils, resulting in stronger effects on rheological properties including greater viscosity. This work presents a mechanism for modifying rheological properties using renewable and environmentally-friendly nanocellulose and clays which could be used in a variety of industrial products including home and personal care formulations.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Nanoclay-based drug delivery systems and their therapeutic potentials

Safe, therapeutically effective, and patient-compliant drug delivery systems are needed to design novel tools and strategies to combat the deadliest of diseases such as cancer, SARS, H7N9 avian influenza, and dengue infection. The major challenges in drug delivery are cytotoxicity, poor biodistribution, insufficient functionality, ineffective drug incorporation in delivery devices, and subsequent drug release. Clay minerals are a class of nanolayered silicates that have good biocompatibility, high specific surface area, chemical inertness, colloid, and thixotropy, and are attractive practical and potential nanomaterials in medicine. These properties enable the usage of nanoclays as drug carriers for the delivery of antibiotics, antihypertensive drugs, anti-psychotic, and anticancer drugs. The review examines the latest advances in nanoclay-based drug delivery systems and related applications in gene therapy and tissue engineering. Clay minerals, particularly montmorillonite, kaolinite, and halloysite are used to delay and/or target drug release or even improve drug dissolution due to their surface charge. Chemical modification of clay minerals such as intercalation of ions into the interlayer space of clay minerals or surface modification of clay minerals is a strategy to tune the properties of nanoclays for the loading and release of a drug. The modified nanoclay can take up drugs by encapsulation, immobilization, ion exchange reaction, or electrostatic interactions. Controlled drug release from the drug-clay originates from the incorporation and interactions between the drug and inorganic layers, including electrostatic interactions and hydrogen bonding. Montmorillonite has proven non-toxic through hematological, biochemical, and histopathological analyses in rat. Montmorillonite can also act as a potent detoxifier. Halloysite nanotubes can bind synthetic and biological components such as chitosan, gelatin, and alginate innate nanocarriers for the improved loading and controlled release of drugs, proteins, and DNA. The peculiar properties of clay nanoparticles lead to promising applications in drug delivery, gene delivery, tissue engineering, cancer and stem cell isolation, and bioimaging.

Recent advances in the design of inorganic and nano-clay particles for the treatment of brain disorders

Inorganic materials, in particular nanoclays and silica nanoparticles, have attracted enormous attention due to their versatile and tuneable properties, making them ideal candidates for a wide range of biomedical applications, such as drug delivery. This review aims at overviewing recent developments of inorganic nanoparticles (like porous or mesoporous silica particles) and different nano-clay materials (like montmorillonite, laponites or halloysite nanotubes) employed for overcoming the blood brain barrier (BBB) in the treatment and therapy of major brain diseases such as Alzheimer's, Parkinson's, glioma or amyotrophic lateral sclerosis. Recent strategies of crossing the BBB through invasive and not invasive administration routes by using different types of nanoparticles compared to nano-clays and inorganic particles are overviewed.

Contrasting Anti-obesity Effects of Smectite Clays and Mesoporous Silica in Sprague-Dawley Rats

Porous colloids have been shown to exert unique bioactivities for mediating lipid (fat) metabolism and thereby offer significant potential as anti-obesity therapies. In this study, we compare the capacity for two classes of colloids, that is, smectite clays (Laponite XLG, LAP; montmorillonite, MMT) and mesoporous silica (SBA-15 ordered silica; MPS), to impede intestinal lipid hydrolysis and provoke lipid and carbohydrate excretion through adsorption within their particle matrices. A two-stage in vitro gastrointestinal lipolysis model revealed the capacity for both smectite clays and MPS to inhibit the rate and extent of lipase-mediated digestion under simulated fed state conditions. Each system adsorbed more than its own weight of organic media (i.e., lipid and carbohydrates) after 60 min lipolysis, with MMT adsorbing >10% of all available organics through the indiscriminate adsorption of fatty acids and glycerides. When co-administered with a high-fat diet (HFD) to Sprague-Dawley rats, treatment with MMT and MPS significantly reduced normalized rodent weight gain compared to a negative control, validating their potential to restrict energy intake and serve as anti-obesity therapies. However, in vitro-in vivo correlations revealed poor associations between in vitro digestion parameters and normalized weight gain, indicating that additional/alternate anti-obesity mechanisms may exist in vivo, while also highlighting the need for improved in vitro assessment methodologies. Despite this, the current findings emphasize the potential for porous colloids to restrict weight gain and promote anti-obesity effects to subjects exposed to a HFD and should therefore drive the development of next-generation food-grade biomaterials for the treatment and prevention of obesity.

Determination of the fate and biological responses of food additive silica particles in commercial foods

Synthetic amorphous silica (SAS) is widely added to commercial foods as an anticaking agent. Concern about the potential application of nanosized silica in foods has increased as nanomaterials are not intended for use as food additives. This study evaluated the particle size distributions and biological responses of food additive SAS. An accurate, sensitive, and cost-effective analytical method for probing SAS was established, and quantitative analysis of its presence in commercial foods was performed. The results demonstrate that food additive SAS is an aggregated material composed of nanosized particles with nanosized aggregates of silica particles identified in commercial foods. Food additive SAS did not exhibit acute cytotoxicity compared to both general-grade nano (G-nano) and bulk (G-bulk) silica. Moreover, intestinal transport amounts of food additive SAS were significantly lower than for G-nano. Taken together, we find that food additive SAS does not exhibit acute toxicity resulting from nanosized materials.

Characterization of aerosolized particles from nanoclay-enabled composites during manipulation processes

Manufacturing, processing, use, and disposal of nanoclay-enabled composites potentially lead to the release of nanoclay particles from the polymer matrix in which they are embedded; however, exposures to airborne particles are poorly understood. The present study was conducted to characterize airborne particles released during sanding of nanoclay-enabled thermoplastic composites. Two types of nanoclay, Cloisite® 25A and Cloisite® 93A, were dispersed in polypropylene at 0%, 1%, and 4% loading by weight. Zirconium aluminum oxide (P100/P180 grits) and silicon carbide (P120/P320 grits) sandpapers were used to abrade composites in controlled experiments followed by real-time and offline particle analyses. Overall, sanding the virgin polypropylene with zirconium aluminum oxide sandpaper released more particles compared to silicon carbide sandpaper, with the later exhibiting similar or lower concentrations than that of polypropylene. Thus, a further investigation was performed for the samples collected using the zirconium aluminum oxide sandpaper. The 1% 25A, 1% 93A, and 4% 93A composites generated substantially higher particle number concentrations (1.3-2.6 times) and respirable mass concentrations (1.2-2.3 times) relative to the virgin polypropylene, while the 4% 25A composite produced comparable results, regardless of sandpaper type. It was observed that the majority of the inhalable particles were originated from composite materials with a significant number of protrusions of nanoclay (18-59%). These findings indicate that the percent loading and dispersion of nanoclay in the polypropylene modified the mechanical properties and thus, along with sandpaper type, affected the number of particles released during sanding, implicating the cause of potential adverse health effects.

Random array of inorganic nanoparticles on polymer surface for anti-biofouling property through cost-effective and high-performance dip-coating

Anti-biofouling treatment is required in various fields such as biomedical application, construction, civil engineering, and so on. Currently available techniques such as lithography and replica methods have several limitations in application and accessibility. We introduced a simple, biocompatible, and cost-effective anti-biofouling dip-coating method with polyurethane-inorganic (anisotropic montmorillonite and spherical TiO₂) hybrid coating agent. Layer thickness of coating was as thin as 5 μm. It was cross-confirmed with thickness gauge and cross-section scanning electron microscopy. Through atomic force microscopy, inorganic nanoparticles were observed to be randomly arrayed with particles partially embedded in the polyurethane network. The calculated surface roughness of inorganic-polyurethane hybrid coating was five times larger than the neat substrate film and three times larger than coating without inorganic nanoparticles. Surface energy of the inorganic-polyurethane film decreased with increasing surface roughness as random pattern of inorganic particle reduced van der Waals interaction. Biofouling efficacy was evaluated by mucin adsorption and consecutive alcian blue assay. Results showed that coated film decreased biofouling 81% compared to bare film.

Potential adverse effects on animal health and performance caused by the addition of mineral adsorbents to feeds to reduce mycotoxin exposure

The contamination of feed with mycotoxins is a continuing feed quality and safety issue, leading to significant losses in livestock production and potential human health risks. Consequently, various methods have been developed to reduce the occurrence of mycotoxins in feed; however, feed supplementation with clay minerals or mineral adsorbents is the most prominent approach widely practiced by farmers and the feed industry. Due to a negatively charged and high surface area, pore volume, swelling ability, and high cation exchange capacity, mineral adsorbents including bentonite, zeolite, montmorillonite, and hydrated sodium calcium aluminosilicate can bind or adsorb mycotoxins to their interlayer spaces, external surface, and edges. Several studies have shown these substances to be partly or fully effective in counteracting toxic effects of mycotoxins in farm animals fed contaminated diets and thus are extensively used in livestock production to reduce the risk of mycotoxin exposure. Nevertheless, a considerable number of studies have indicated that these agents may also cause undesirable effects in farm animals. The current work aims to review published reports regarding adverse effects that may arise in farm animals (with a focus on pig and poultry) and potential interaction with veterinary substances and nutrients in feeds, when mineral adsorbents are utilized as a technological feed additive. Furthermore, results of in vitro toxicity studies of both natural and modified mineral adsorbents on different cell lines are reported. Supplementation of mycotoxin-contaminated feed with mineral adsorbents must be carefully considered by farmers and feed industry.

Montmorillonite-based polyacrylamide hydrogel rings for controlled vaginal drug delivery

Vaginal drug delivery is regarded as a promising route against women-related health issues such as unwanted pregnancies and sexually transmitted infections. However, only a very few studies have been reported on the use of hydrogel rings with low cytotoxicity for vaginal drug delivery applications. Moreover, the effect of nanoparticles on hydrogel vaginal rings has not been clearly evaluated. To overcome these challenges, we hereby developed nanocomposite hydrogel rings based on polyacrylamide-sodium carboxymethyl cellulose-montmorillonite nanoparticles in the ring-shaped aluminum mold for controlled drug delivery. The hydrogel rings were synthesized by using N,N'-methylene bisacrylamide, N,N,N',N'-tetramethyl ethylene diamine, and ammonium persulfate, as a crosslinker, accelerator, and initiator, respectively. The obtained rings were 5.5 cm in diameters and 0.5 cm in rims. Chemical structures of the nanocomposite rings were confirmed by Fourier transform infrared, and Nuclear Magnetic Resonance spectroscopies. Additionally, the swelling ratio of hydrogels was appeared to be adjusted by the introduction of nanoparticles. In vitro release experiment of methylene blue, as a hydrophilic model drug, revealed that the nanocomposite rings could not only reduce burst effect (almost more than twice), but also achieve prolonged release for 15 days in the vaginal fluid simulant which mimic the vaginal conditions at pH of almost 4.2, and a temperature of 37 °C. Importantly, the resultant hydrogel rings with or without various concentrations of montmorillonite showed low cytotoxicity toward human skin fibroblasts. Furthermore, different antibacterial activities against Escherichia coli were observed for various concentrations of montmorillonite in hydrogels. These results suggest the great potential of montmorillonite-based hydrogel rings for vaginal drug delivery.

Preparations of Silver/Montmorillonite Biocomposite Multilayers and Their Antifungal Activity

In this study, the results about the influence of the surface morphology of layers based on montmorillonite (MMT) and silver (Ag) on antimicrobial properties are reported. The coating depositions were performed in the plasma of a radio frequency (RF) magnetron sputtering discharge. The studied layers were single montmorillonite layers (MMT) and silver/montmorillonite multilayers (MMT-Ag) obtained by magnetron sputtering technique with a different surface thickness. The resultant MMT-Ag biocomposite multilayers exhibited a uniform distribution of constituent elements and enhanced antimicrobial properties against fungal biofilm development. Glow-discharge optical emission spectroscopy (GDOES) analysis revealed the formation of MMT-Ag biocomposite multilayers following the deposit of a silver layer for an MMT layer that was initially deposited on a Si substrate. The surface morphology and thickness evaluation of deposited biocomposite layers were performed by scanning electron microscopy (SEM). A qualitative analysis of the chemical composition of thin layers was performed and the elements O, Ag, Mg, Fe, Al, and Si were identified in the MMT-Ag biocomposite multilayers. The in vitro antifungal assay proved that the inhibitory effect against the growth of Candida albicans ATCC 101231 CFU was more emphasized in the case of MMT-Ag biocomposite multilayers that in the case of the MMT layer. Cytotoxicity studies performed on HeLa cells showed that the tested layers did not show significant toxicity at the time intervals during which the assay was performed. On the other hand, it was observed that the MMT layers exhibited slightly higher biocompatible properties than the MMT-Ag composite layers.

Rechargeable anti-microbial adhesive formulation containing cetylpyridinium chloride montmorillonite

Long-term anti-bacterial effect is a desired ability of any dental material in combating tooth caries as one of the most common and widespread persistent diseases today. Among several cationic quaternary ammonium compounds with antiseptic properties, cetylpyridinium chloride (CPC) is often used in mouthrinses and toothpastes. In this study, we incorporated CPC in a soft phyllosilicate mineral (clay), referred to as montmorillonite (Mont), to enable gradual CPC release with rechargeability. Besides measuring CPC release and recharge, we examined the anti-bacterial effect, cytotoxicity and bonding effectiveness of five experimental adhesive formulations, prepared by adding 1 and 3 wt% CPC_Mont, 3 wt% Mont (without CPC), and 1 and 3 wt% CPC (without Mont) to the commercial adhesive Clearfil S³ Bond ND Quick ('C-S³B'; Kuraray Noritake). Strong inhibition of Streptococcus mutans biofilm formation by CPC_Mont adhesives was confirmed by optical density and SEM. CPC release from CPC_Mont adhesives was higher and lasted longer than from CPC adhesives, while CPC_Mont adhesives could also be recharged with CPC upon immersion in 2 wt% CPC. In conclusion, CPC_Mont technology rendered adhesives anti-bacterial properties with recharge ability, this without reducing its bonding potential, neither increasing its cytotoxicity. STATEMENT OF SIGNIFICANCE: Dental caries is one of the most prevalent chronic diseases in the population worldwide and is the major cause of tooth loss. In this study, we developed cetylpyridinium chloride (CPC) loaded montmorillonite (CPC-Mont) with a long-term antibacterial efficacy to prevent caries. CPC is an antibacterial agent approved by FDA, used as an OTC drug and contained in oral hygiene aids. CPC-Mont was incorporated in a dental adhesive to gradually release CPC. CPC_Mont technology rendered adhesives anti-bacterial properties with rechargeability, this without reducing its bonding potential, neither increasing its cytotoxicity.

Cerium Aminoclay-A Potential Hybrid Biomaterial for Anticancer Therapy

In this study, novel biomedical properties of Ce-aminoclay (CeAC) were investigated through in vitro and in vivo assays. CeAC (≥500 μg/mL) can selectively kill cancer cells (A549, Huh-1, AGS, C33A, HCT116, and MCF-7 cells) while leaving most normal cells unharmed (WI-38 and CCD-18Co cells). Notably, it displayed a high contrast of simultaneous imaging in HeLa cells by blue photoluminescence without any fluorescence dye. Its anticancer mechanism has been fully demonstrated through apoptosis assays; herein CeAC induced high-level apoptosis (16%), which promoted the expression of proapoptotic proteins (Bax, p53, and caspase 9) in tumor cells. Besides, its biological behavior was determined through antitumor effects using intravenous and intratumoral administration routes in mice implanted with HCT116 cells. During a 40 day trial, the tumor volume and tumor weight were reduced by a maximum of 92.24 and 86.11%, respectively. The results indicate that CeAC exhibits high bioavailability and therapeutic potential based on its unique characteristics, including high antioxidant capacity and electrostatic interaction between its amino functional groups and the mucosal surface of cells. In summary, it is suggested that CeAC, with its high bioimaging contrast, can be a promising anticancer agent for future biomedical applications.

Migration of Quaternary Ammonium Cations from Exfoliated Clay/Low-Density Polyethylene Nanocomposites into Food Simulants

Clay/polymer nanocomposites (CPNs) are polymers incorporating refined clay particles that are frequently functionalized with quaternary ammonium cations (QACs) as dispersion aids. There is interest in commercializing CPNs for food contact applications because they have improved strength and barrier properties, but there are few studies on the potential for QACs in CPNs to transfer to foods under conditions of intended use. In this study, we manufactured low-density poly(ethylene) (LDPE)-based CPNs and assessed whether QACs can migrate into several food simulants under accelerated storage conditions. QACs were found to migrate to a fatty food simulant (ethanol) at levels of ∼1.1 μg mg^-1 CPN mass after 10 days at 40 °C, constituting about 4% total migration (proportion of the initial QAC content in the CPN that migrated to the simulant). QAC migration into ethanol was ∼16× higher from LDPE containing approximately the same concentration of QACs but no clay, suggesting that most QACs in the CPN are tightly bound to clay particles and are immobile. Negligible QACs were found to migrate into aqueous, alcoholic, or acidic simulants from CPNs, and the amount of migrated QACs was also found to scale with the temperature and the initial clay concentration. The migration data were compared to a theoretical diffusion model, and it was found that the diffusion constant for QACs in the CPN was several orders of magnitude slower than predicted, which we attributed to the potential for QACs to migrate as dimers or other aggregates rather than as individual ions. Nevertheless, the use of the migration model resulted in a conservative estimate of the mass transfer of QAC from the CPN test specimens.

The influence of organic modification on the cytotoxicity of clay particles to keratinocytes, hepatocytes and macrophages; an investigation towards the safe use of polymer-clay nanocomposite packaging

Organically modified clays can be used as nanofillers in polymer-clay nanocomposites to create bio-based packaging with improved strength and barrier properties. The impact of organic modification on the physico-chemical properties and toxicity of clays has yet to be fully investigated but is essential to ensure their safe use. Two organoclays, named N116_HDTA and N116_TMSA, were prepared using a commercially available sodium bentonite clay and the organic modifiers hexadecyl trimethyl ammonium bromide (HDTA) and octadecyl trimethyl ammonium chloride (TMSA). An in vitro hazard assessment was performed using HaCaT skin cells, C3A liver cells, and J774.1 macrophage-like cells. Organic modification with HDTA and TMSA increased the hazard potential of the organoclays in all cell models, as evidenced by the higher levels of cytotoxicity measured. N116_TMSA caused the greatest loss in viability with IC50 values of 3.2, 3.6 and 6.1 μg/cm² calculated using J774.1, HaCaT and C3A cell lines, respectively. Cytotoxic effects were dictated by the amount of free or displaced organic modifier present in the exposure suspensions. The parent bentonite clay also caused distinct cytotoxic effects in J774.1 macrophage-like cells with associated TNF-α release. Such information on the hazard profile of organoclays, can feed into risk assessments for these materials.

Nanoparticles as a Solution for Eliminating the Risk of Mycotoxins

Mycotoxins are toxic secondary metabolites produced by certain filamentous fungi. The occurrence of mycotoxins in food and feed causes negative health impacts on both humans and animals. Clay binders, yeast cell walls, or antioxidant additives are the most widely used products for mycotoxin elimination to reduce their impact. Although conventional methods are constantly improving, current research trends are looking for innovative solutions. Nanotechnology approaches seem to be a promising, effective, and low-cost way to minimize the health effects of mycotoxins. This review aims to shed light on the critical knowledge gap in mycotoxin elimination by nanotechnology. There are three main strategies: mold inhibition, mycotoxin adsorption, and reducing the toxic effect via nanoparticles. One of the most promising methods is the use of carbon-based nanomaterials. Graphene has been shown to have a huge surface and high binding capacity for mycotoxins. Attention has also been drawn to polymeric nanoparticles; they could substitute adsorbents or enclose any substance, which would improve the health status of the organism. In light of these findings, this review gives new insights into possible future research that might overcome challenges associated with nanotechnology utilization for mycotoxin elimination from agricultural products.

Self-Assembling Nanoclay Diffusion Gels for Bioactive Osteogenic Microenvironments

Laponite nanoparticles have attracted attention in the tissue engineering field for their protein interactions, gel-forming properties, and, more recently, osteogenic bioactivity. Despite growing interest in the osteogenic properties of Laponite, the application of Laponite colloidal gels to host the osteogenic differentiation of responsive stem cell populations remains unexplored. Here, the potential to harness the gel-forming properties of Laponite to generate injectable bioactive microenvironments for osteogenesis is demonstrated. A diffusion/dialysis gelation method allows the rapid formation of stable transparent gels from injectable, thixotropic Laponite suspensions in physiological fluids. Upon contact with buffered saline or blood serum, nanoporous gel networks exhibiting, respectively, fivefold and tenfold increases in gel stiffness are formed due to the reorganization of nanoparticle interactions. Laponite diffusion gels are explored as osteogenic microenvironments for skeletal stem cell containing populations. Laponite films support cell adhesion, proliferation, and differentiation of human bone marrow stromal cells in 2D. Laponite gel encapsulation significantly enhances osteogenic protein expression compared with 3D pellet culture controls. In both 2D and 3D conditions, cell associated mineralization is strongly enhanced. This study demonstrates that Laponite diffusion gels offer considerable potential as biologically active and clinically relevant bone tissue engineering scaffolds.

Incineration of Nanoclay Composites Leads to Byproducts with Reduced Cellular Reactivity

Addition of nanoclays into a polymer matrix leads to nanocomposites with enhanced properties to be used in plastics for food packaging applications. Because of the plastics' high stored energy value, such nanocomposites make good candidates for disposal via municipal solid waste plants. However, upon disposal, increased concerns related to nanocomposites' byproducts potential toxicity arise, especially considering that such byproducts could escape disposal filters to cause inhalation hazards. Herein, we investigated the effects that byproducts of a polymer polylactic acid-based nanocomposite containing a functionalized montmorillonite nanoclay (Cloisite 30B) could pose to human lung epithelial cells, used as a model for inhalation exposure. Analysis showed that the byproducts induced toxic responses, including reductions in cellular viability, changes in cellular morphology, and cytoskeletal alterations, however only at high doses of exposure. The degree of dispersion of nanoclays in the polymer matrix appeared to influence the material characteristics, degradation, and ultimately toxicity. With toxicity of the byproduct occurring at high doses, safety protocols should be considered, along with deleterious effects investigations to thus help aid in safer, yet still effective products and disposal strategies.

Toxicity evaluations of nanoclays and thermally degraded byproducts through spectroscopical and microscopical approaches

BACKGROUND

Montmorillonite is a type of nanoclay that originates from the clay fraction of the soil and is incorporated into polymers to form nanocomposites with enhanced mechanical strength, barrier, and flammability properties used for food packaging, automotive, and medical devices. However, with implementation in such consumer applications, the interaction of montmorillonite-based composites or derived byproducts with biological systems needs to be investigated.

METHODS

Herein we examined the potential of Cloisite Na⁺ (pristine) and Cloisite 30B (organically modified montmorillonite nanoclay) and their thermally degraded byproducts' to induce toxicity in model human lung epithelial cells. The experimental set-up mimicked biological exposure in manufacturing and disposal areas and employed cellular treatments with occupationally relevant doses of nanoclays previously characterized using spectroscopical and microscopical approaches. For nanoclay-cellular interactions and for cellular analyses respectively, biosensorial-based analytical platforms were used, with induced cellular changes being confirmed via live cell counts, viability assays, and cell imaging.

RESULTS

Our analysis of byproducts' chemical and physical properties revealed both structural and functional changes. Real-time high throughput analyses of exposed cellular systems confirmed that nanoclay induced significant toxic effects, with Cloisite 30B showing time-dependent decreases in live cell count and cellular viability relative to control and pristine nanoclay, respectively. Byproducts produced less toxic effects; all treatments caused alterations in the cell morphology upon exposure.

CONCLUSIONS

Our morphological, behavioral, and viability cellular changes show that nanoclays have the potential to produce toxic effects when used both in manufacturing or disposal environments.

GENERAL SIGNIFICANCE

The reported toxicological mechanisms prove the extensibility of a biosensorial-based platform for cellular behavior analysis upon treatment with a variety of nanomaterials.

Induction of micronuclei and alteration of gene expression by an organomodified clay in HepG2 cells

Clay2 is an organomodified montmorillonite developed by the Technological Institute of Packaging, Transport and Logistic (ITENE) in order to improve polymeric materials used in food packaging. There is not much known on Clay2 toxic potential, particularly at DNA level, therefore it is mandatory to assess its toxicity prior to its commercialization. In the present study the human hepatoma cell line (HepG2) was exposed to non-cytotoxic concentrations of Clay2 and the genomic stability was studied with the Cytokinesis block micronucleus cytome assay, by determining the formation of micronuclei (MN), nucleoplasmic bridges (NPBs) and nuclear buds (NBUDs). Moreover, the expression of various genes involved in the mechanisms of its action using the real-time quantitative PCR was studied. The results obtained provide the evidence that Clay2 is potentially genotoxic as it increased the frequency of micronuclei. In addition it deregulated genes involved in the metabolism, immediate-early response/signaling, DNA damage and oxidative stress showing new valuable information on the cellular response to Clay2. Nonetheless, further studies are highly needed to elucidate the molecular mechanisms of clays toxicity.

Genotoxic potential of montmorillonite clay mineral and alteration in the expression of genes involved in toxicity mechanisms in the human hepatoma cell line HepG2

Montmorillonite, also known as Cloisite(®)Na(+) (CNa(+)), is a natural clay with a wide range of well-documented and novel applications, such as pharmaceutical products or food packaging. Although considered a low toxic product, the expected increased exposure to CNa(+) arises concern on the potential consequences on human and environmental health especially as its genotoxicity has scarcely been investigated so far. Thus, we investigated, for the first time, the influence of non-cytotoxic concentrations of CNa(+) (15.65, 31.25 and 62.5 μg/mL) on genomic instability of human hepatoma cell line (HepG2) by determining the formation of micronuclei (MNi), nucleoplasmic bridges (NPBs) and nuclear buds (NBUDs) with the Cytokinesis block micronucleus cytome assay. Further on we studied the influence of CNa(+) on the expression of several genes involved in toxicity mechanisms using the real-time quantitative PCR. The results showed that CNa(+) increased the number of MNi, while the numbers of NBUDs and NPBs were not affected. In addition it deregulated genes in all the groups studied, mainly after longer time of exposure. These findings provide the evidence that CNa(+) is potentially genotoxic. Therefore further studies that will elucidate the molecular mechanisms involved in toxic activity of CNa(+) are needed for hazard identification and human safety assessment.

Surface patch binding induced interaction of anisotropic nanoclays with globular plasma proteins

Morphology dependent interaction of model anisotropic nanoparticles with globular plasma proteins.

Gastroretentive montmorillonite-tetracycline nanoclay for the treatment of Helicobacter pylori infection

The paper aims to explore the potential benefits provided by an organically modified montmorillonite (nanoclay) in the problematic management of the Helicobacter pylori gastric infection that is one of the most prevalent infectious diseases worldwide. Two nanoclay samples were produced by the intercalation of tetracycline (TC) into the interlayer of montmorillonite (MM) under two different pH reaction conditions (pH 3.0 and 8.7). MM/TC nanoclays were characterized by EDX, XRD, FTIR, DSC, drug adsorption extent, in vitro mucoadhesiveness and desorption in simulated gastric media. The reaction between MM and TC led to a complete MM cation (Na(+) and Ca(2+)) exchange process, an increase of MM characteristic interlayer spacing as well as an involvement of NHR3(+) group of TC, regardless of the reaction pH value. However, MM/TC nanoclay obtained under alkaline conditions provided a lower TC adsorption as well as a drug fraction weakly linked to MM in comparison with the nanoclay obtained in acidic conditions. Both the nanoclays exhibited good mucoadhesion properties to porcine mucin and TC desorption occurring mainly via a cation exchange process by H(+) ions. Based on the results obtained, TC intercalation into MM nanoplatelets could represent a potential advantageous approach allowing the antibiotic to distribute homogeneously on the gastric mucosa, diffuse through the gastric mucus layer and achieve the microorganism localization.

Effect of the solvent on the size of clay nanoparticles in solution as determined using an ultraviolet-visible (UV-Vis) spectroscopy methodology

Ultraviolet-visible (UV-Vis) spectroscopy methodology was developed and utilized for the in situ nanoscale measurement of the size of mineral clay agglomerates in various liquid suspensions. The clays studied were organomodified and unmodified montmorillonite clays (I.44p, Cloisite 93a, and PGN). The methodology was compared and validated against dynamic light scattering (DLS) analysis. The method was able to measure clay agglomerates in solvents in situations where DLS analysis was unsuccessful due to the shapes, polydispersity, and high aspect ratios of the clay particles and the complexity of the aggregates, or dispersion medium. The measured clay agglomerates in suspension were found to be in the nanometer range in the more compatible solvents, and their sizes correlated with the Hansen solubility parameter space distance between the clay modifiers and the solvents. Mass detection limits for size determination were in the range from 1 to 9 mg/L. The methodology thus provides simple, rapid, and inexpensive characterization of clays or particles in the nano- or microsize range in low concentrations in various liquid media, including complex mixtures or highly viscous fluids that are difficult to analyze with DLS. In addition, by combining UV-VIS spectroscopy with DLS it was possible to discern flocculation behavior in liquids, which otherwise could result in false size measurements by DLS alone.

Toxicological evaluation of clay minerals and derived nanocomposites: a review

Clays and clay minerals are widely used in many facets of our society. This review addresses the main clays of each phyllosilicate groups, namely, kaolinite, montmorillonite (Mt) and sepiolite, placing special emphasis on Mt and kaolinite, which are the clays that are more frequently used in food packaging, one of the applications that are currently exhibiting higher development. The improvements in the composite materials obtained from clays and polymeric matrices are remarkable and well known, but the potential toxicological effects of unmodified or modified clay minerals and derived nanocomposites are currently being investigated with increased interest. In this sense, this work focused on a review of the published reports related to the analysis of the toxicological profile of commercial and novel modified clays and derived nanocomposites. An exhaustive review of the main in vitro and in vivo toxicological studies, antimicrobial activity assessments, and the human and environmental impacts of clays and derived nanocomposites was performed. From the analysis of the scientific literature different conclusions can be derived. Thus, in vitro studies suggest that clays in general induce cytotoxicity (with dependence on the clay, concentration, experimental system, etc.) with different underlying mechanisms such as necrosis/apoptosis, oxidative stress or genotoxicity. However, most of in vivo experiments performed in rodents showed no clear evidences of systemic toxicity even at doses of 5000mg/kg. Regarding to humans, pulmonary exposure is the most frequent, and although clays are usually mixed with other minerals, they have been reported to induce pneumoconiosis per se. Oral exposure is also common both intentionally and unintentionally. Although they do not show a high toxicity through this pathway, toxic effects could be induced due to the increased or reduced exposure to mineral elements. Finally, there are few studies about the effects of clay minerals on wildlife, with laboratory trials showing contradictory outcomes. Clay minerals have different applications in the environment, thus with a strict control of the concentrations used, they can provide beneficial uses. Despite the extensive number of reports available, there is also a need of systematic in vitro-in vivo extrapolation studies, with still scarce information on toxicity biomarkers such as inmunomodulatory effects or alteration of the genetic expression. In conclusion, a case by case toxicological evaluation is required taking into account that different clays have their own toxicological profiles, their modification can change this profile, and the potential increase of the human/environmental exposure to clay minerals due to their novel applications.

Cytotoxicity and mutagenicity assessment of organomodified clays potentially used in food packaging

Modern food packaging has made great advances as result of global trends and consumer preferences, which are oriented to obtain improved food quality and safety. In this regard, clay minerals, and mainly Montmorillonite (Mt) are attracting considerable interest in food packaging because of the improvements developed in mechanical and barrier properties. Hence, the present work aim to assess the toxicity of four Montmorillonite-based clay minerals, an unmodified clay, Cloisite®Na+ (CNa+), and three modified Mt clays: Cloisite®30B (C30B), a commercial clay, and Clay1 and Clay2, two novel modified organoclays developed by the Packaging, Transport, & Logistics Research Institute (ITENE). First, the cytotoxic effects were studied in the Human Umbilical Vein Endothelial Cells (HUVEC). In addition, the potential mutagenicity of the clays was evaluated by the Ames test. Clay1 did not induce any cytotoxic effects in HUVEC, although it exhibited potential mutagenicity in TA98 Salmonella typhimurium strain. In contrast, Clay2 produced cytotoxicity in endothelial cells but no mutagenicity was recorded. However, CNa+ was not cytotoxic neither mutagenic. And finally, C30B showed positive results in both assays. Therefore, results showed that clay minerals have a different toxicity profile and a case by case toxicity evaluation is required.