Nature Inspired MXene-Decorated 3D Honeycomb-Fabric Architectures Toward Efficient Water Desalination and Salt Harvesting

Scalable Asymmetric Fabric Evaporator for Solar Desalination and Thermoelectricity Generation

The integration of solar interfacial evaporation and power generation offers a sustainable solution to address water and electricity scarcity. Although water-power cogeneration schemes are proposed, the existing schemes lack scalability, flexibility, convenience, and stability. These limitations severely limit their future industrial applications. In this study, we prepared a hybrid fabric composed of basalt fibers and cotton yarns with asymmetric structure using textile weaving technology. The cotton yarn in lower layer of fabric facilitates water transport, while the basalt fibers in upper layer enable thermal localization and water supply balancing. The carbon black is deposited on top layer by flame burning to facilitate photothermal conversion. The fabric exhibits a high evaporation rate of 1.52 kg m-2 h-1, which is 3.6 times that of pure water, and an efficiency of 88.06% under 1 kW m-2 light intensity. After assembly with a thermoelectric module, the hybrid system achieves a maximum output power density of 66.73 mW m-2. By exploiting the scalability of fabric, large-scale desalination and power production can be achieved in outdoor environments. This study demonstrates the seamless integration of fabric-based solar evaporation and waste heat-to-energy technologies, thereby providing new avenues for the development of scalable and stable water-power cogeneration systems.

Dual-Interface Solar Evaporator with Highly-Efficient Thermal Regulation via Suspended Multilayer Design

Facing the increasing global shortage of freshwater resources, this study presents a suspended multilayer evaporator (SMLE), designed to tackle the principal issues plaguing current solar-driven interfacial evaporation technologies, specifically, substantial thermal losses and limited water production. This approach, through the implementation of a multilayer structural design, enables superior thermal regulation throughout the evaporation process. This evaporator consists of a radiation damping layer, a photothermal conversion layer, and a bottom layer that leverages radiation, wherein the bottom layer exhibits a notable infrared emissivity. The distinctive feature of the design effectively reduces radiative heat loss and facilitates dual-interface evaporation by heating the water surface through mid-infrared radiation. The refined design leads to a notable evaporation rate of 2.83 kg m-2 h-1. Numerical simulations and practical performance evaluations validate the effectiveness of the multilayer evaporator in actual use scenarios. This energy-recycling and dual-interface evaporation multilayered approach propels the design of high-efficiency solar-driven interfacial evaporators forward, presenting new insights into developing effective water-energy transformation systems.

Hierarchical Ti3C2/BiVO4 microcapsules for enhanced solar-driven water evaporation and photocatalytic H2 evolution

Desalination processes frequently require a lot of energy to generate freshwater and energy, which depletes resources. Their reliance on each other creates tension between these two vital resources. Herein, hierarchical MXene nanosheets and bismuth vanadate (Ti3C2/BiVO4)-derived microcapsules were synthesized for a photothermal-induced photoredox reaction for twofold applications, namely, solar-driven water evaporation and hydrogen (H2) production. For this purpose, flexible aerogels were fabricated by introducing Ti3C2/BiVO4 microcapsules in the polymeric network of natural rubber latex (NRL-Ti3C2/BiVO4), and a high evaporation rate of 2.01 kg m-2 h-1 was achieved under 1-kW m-2 solar intensity. The excellent performance is attributed to the presence of Ti3C2/BiVO4 microcapsules in the polymeric network, which provides balanced hydrophilicity and broadband sun absorption (96 %) and is aimed at plasmonic heating with microscale thermal confinement tailored by heat transfer simulations. Notably, localized plasmonic heating at the catalyst active sites of the Ti3C2/BiVO4 heterostructure promotes enhanced photocatalytic H2 production evolved after 4 h of reaction is 9.39 μmol, which is highly efficient than pure BiVO4 and Ti3C2. This method turns the issue of water-fuel crisis into a collaborative connection, presenting avenues to collectively address the anticipated demand rather than fostering competition.

Fluid Unidirectional Transport Induced by Structure and Ambient Elements across Porous Materials: From Principles to Applications

Spontaneous or nonspontaneous unidirectional fluid transport across multidimension can occur under specific structural designs and ambient elements for porous materials. While existing reviews have extensively summarized unidirectional fluid transport on surfaces, there is an absence of literature summarizing fluid's unidirectional transport across porous materials. This review introduces wetting phenomena observed on natural biological surfaces or porous structures. Subsequently, it offers an overview of diverse principles and potential applications in this field, emphasizing various physical and chemical structural designs (surface energy, capillary size, topographic curvature) and ambient elements (underwater, under oil, pressure, and solar energy). Applications encompass moisture-wicking fabric, sensors, skincare, fog collection, oil-water separation, electrochemistry, liquid-based gating, and solar evaporators. Additionally, significant principles and formulas from various studies are compelled to offer readers valuable references. Simultaneously, potential advantages and challenges are critically assessed in these applications and the perspectives are presented.

Microplastic detection and remediation through efficient interfacial solar evaporation for immaculate water production

Freshwater scarcity and microplastics (MPs) pollution are two concerning and intertwined global challenges. In this work, we propose a "one stone kills two birds" strategy by employing an interfacial solar evaporation platform (ISEP) combined with a MPs adsorbent. This strategy aims to produce clean water and simultaneously enhance MPs removal. Unlike traditional predecessors, our ISEP generates condensed water free from MPs contamination. Additionally, the photothermally driven interfacial separation process significantly improves the MPs removal performance. We observed a removal ratio increase of up to 5.5 times compared to previously reported MPs adsorbents. Thus, our rationally-designed ISEP holds promising potential to not only mitigate the existing water scarcity issue but also remediate MPs pollution in natural water environments.

Enhancing Solar Steam Generation of Hydrogels via Silver Nanoparticle-Doped Cellulose Nanofibers

Solar steam generation (SSG) is regarded as an efficient approach for harnessing solar energy to purify polluted or saline water. Herein, we demonstrate a hydrogel composed of cellulose nanofibers (CNFs), polyethylenimine (PEI), and reduced graphene oxide (rGO) that functions as an independent solar steam generator, which shows enhanced solar water evaporation efficiency by incorporating silver nanoparticles (AgNPs). It presented that the presence of AgNPs increases the photothermal conversion efficiency and thermal conductivity of the evaporator and reduces the enthalpy of evaporation. As a result, an outstanding water evaporation rate of 3.62 kg m-2 h-1 and a photothermal conversion efficiency of 96.25% are successfully obtained under one sun illumination. Also, the resulting hydrogel exhibits exceptional mechanical properties, as well as outstanding desalination and salt-resistant abilities during prolonged seawater desalination. In oil/water mixtures, the evaporation of the hydrogel decreases to 2.94 kg m-2 h-1, owing to the oil layer barrier. This work paves a reference approach to produce easily addressed cellulose nanofiber (CNF)-based hydrogel evaporators with significantly enhanced evaporation rates.

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation

Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of "waste" MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m-2 h-1 under one-sun illumination, and 18.37 kg m-2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes "waste" MS, enabling a self-floating evaporation device for freshwater collection.

Tree-Inspired Structurally Graded Aerogel with Synergistic Water, Salt, and Thermal Transport for High-Salinity Solar-Powered Evaporation

Solar-powered interfacial evaporation is an energy-efficient solution for water scarcity. It requires solar absorbers to facilitate upward water transport and limit the heat to the surface for efficient evaporation. Furthermore, downward salt ion transport is also desired to prevent salt accumulation. However, achieving simultaneously fast water uptake, downward salt transport, and heat localization is challenging due to highly coupled water, mass, and thermal transport. Here, we develop a structurally graded aerogel inspired by tree transport systems to collectively optimize water, salt, and thermal transport. The arched aerogel features root-like, fan-shaped microchannels for rapid water uptake and downward salt diffusion, and horizontally aligned pores near the surface for heat localization through maximizing solar absorption and minimizing conductive heat loss. These structural characteristics gave rise to consistent evaporation rates of 2.09 kg m-2 h-1 under one-sun illumination in a 3.5 wt% NaCl solution for 7 days without degradation. Even in a high-salinity solution of 20 wt% NaCl, the evaporation rates maintained stable at 1.94 kg m-2 h-1 for 8 h without salt crystal formation. This work offers a novel microstructural design to address the complex interplay of water, salt, and thermal transport.

Leveraging Oriented Lateral Walls of Nerve Guidance Conduit with Core-Shell MWCNTs Fibers for Peripheral Nerve Regeneration

Peripheral nerve regeneration and functional recovery rely on the chemical, physical, and structural properties of nerve guidance conduits (NGCs). However, the limited support for long-distance nerve regeneration and axonal guidance has hindered the widespread use of NGCs. This study introduces a novel nerve guidance conduit with oriented lateral walls, incorporating multi-walled carbon nanotubes (MWCNTs) within core-shell fibers prepared in a single step using a modified electrohydrodynamic (EHD) printing technique to promote peripheral nerve regeneration. The structured conduit demonstrated exceptional stability, mechanical properties, and biocompatibility, significantly enhancing the functionality of NGCs. In vitro cell studies revealed that RSC96 cells adhered and proliferated effectively along the oriented fibers, demonstrating a favorable response to the distinctive architectures and properties. Subsequently, a rat sciatic nerve injury model demonstrated effective efficacy in promoting peripheral nerve regeneration and functional recovery. Tissue analysis and functional testing highlighted the significant impact of MWCNT concentration in enhancing peripheral nerve regeneration and confirming well-matured aligned axonal growth, muscle recovery, and higher densities of myelinated axons. These findings demonstrate the potential of oriented lateral architectures with coaxial MWCNT fibers as a promising approach to support long-distance regeneration and encourage directional nerve growth for peripheral nerve repair in clinical applications.

Tailoring Built-In Electric Field in a Self-Assembled Zeolitic Imidazolate Framework/MXene Nanocomposites for Microwave Absorption

Heterointerface engineering, which plays a pivotal role in developing advanced microwave-absorbing materials, is employed to design zeolitic imidazolate framework (ZIF)-MXene nanocomposites. The ZIF-MXene composites are prepared by electrostatic self-assembly of negatively charged titanium carbide MXene flakes and positively charged Co-containing ZIF nanomaterials. This approach effectively creates abundant Mott-Schottky heterointerfaces exhibiting a robust built-in electric field (BIEF) effect, as evidenced by experimental and theoretical analyses, leading to a notable attenuation of electromagnetic energy. Systematic manipulation of the BIEF-exhibiting heterointerface, achieved through topological modulation of the ZIF, proficiently alters charge separation, facilitates electron migration, and ultimately enhances polarization relaxation loss, resulting in exceptional electromagnetic wave absorption performance (reflection loss RLmin = -47.35 dB and effective absorption bandwidth fE = 6.32 GHz). The present study demonstrates an innovative model system for elucidating the interfacial polarization mechanisms and pioneers a novel approach to developing functional materials with electromagnetic characteristics through spatial charge engineering.

Magnetically driven Janus conical vertical array for all-weather freshwater collection

The engineering of multifunctional structures with special surface wettability is highly desirable for all-weather freshwater production, but relevant research is scarce. In this study, a Janus conical vertical array was designed and fabricated via a magnetically driven spray-coating method for the first time. Benefiting from the special structure and wettability enhancement of the array in terms of solar absorption, fog capture and merging, droplet movement and evaporation area, all-weather freshwater production consisting of high-quality daytime solar vapor generation (water evaporation rate approximately 2.43 kg m-2 h-1, 1 kW m-2) and nighttime fog collection (water collection rate approximately 3.536 g cm-2 h-1) can be realized concurrently. When the designed array is employed for outdoor environments (114°35'E, 30°38'N, average daily temperature 34.9 °C, average daily humidity 64.0%), reliable and efficient daily pure water yields of 19.13 kg m-2-26.09 kg m-2 are obtainable. We believe that the proposed strategy for fabricating a Janus conical vertical array is novel in the integration of solar vapor generation and fog collection, which has great significance for all-weather freshwater production.

High-performance self-desalination powered by triboelectric-electromagnetic hybrid nanogenerator

Freshwater is an essential resource in today's world, and how to produce freshwater with low or even zero power consumption is a major challenge. Here, a desalination system powered by a triboelectric-electromagnetic hybrid nanogenerator (TEHG) is presented, which can utilize the water's own energy to remove the salt ions from itself, demonstrating a new concept of "self-desalination". At a relatively low rotation speed of 150 rpm, the system can dilute NaCl brine from 4000 ppm to 145 ppm with a high salt removal rate of 147.1 μg cm-2 min-1 and a freshwater productivity of up to 31.1 L m-2 h-1. The actual seawater can also be treated with a total ion removal efficiency of 99.6 % and a freshwater productivity of 2.7 L m-2 h-1, which is superior to other renewable-energy-powered desalination systems. More importantly, fully self-powered desalination process can be realized by manual cranking and hydrokinetic energy impact, both of which are capable of treating 1000 ppm salt feed to the drinking water level. The TEHG-powered desalination system not only provides excellent desalination performance but also addresses the challenges of power consumption and limited capacity, which offers a completely new paradigm of "self-desalination".

Anisotropic MXene/Poly(vinyl alcohol) Composite Hydrogels with Vertically Oriented Channels and Modulated Surface Topography for Efficient Solar-Driven Water Evaporation and Purification

Hierarchical structure and surface topography play pivotal roles in developing high-performance solar-driven evaporators for clean water production; however, there exists a notable gap in research addressing simultaneous modulation of internal microstructure and surface topography in hydrogels to enhance both solar steam generation performance and desalination efficiency. Herein, anisotropic poly(vinyl alcohol)/MXene composite hydrogels for efficient solar-driven water evaporation and wastewater purification are fabricated using a template-assisted directional freezing approach followed by precise surface wettability modulation. The resultant composite hydrogels exhibit vertically oriented channels that ensure fast water supply during evaporation, and their poly(vinyl alcohol) skeletons can reduce the vaporization enthalpy of the water in the hydrogels. The incorporation of MXene sheets enables efficient solar light absorption and solar-thermal conversion while providing structural reinforcement to the hydrogels. More importantly, the as-created undulating solar-thermal surface, featuring modulated hydrophilic troughs and hydrophobic crests, significantly enhances solar-thermal conversion efficiency, thereby boosting solar evaporation performances. As a result, the fabricated hydrogel-based evaporator exhibits an impressive evaporation rate of 2.55 kg m-2 h-1 under 1 sun irradiation, coupled with long-term durability and desalination stability. Notably, the outstanding mechanical robustness of the hydrogel further enables high portability through a readily achievable process of reversible dehydration/hydration.

Highly Aligned Graphene Aerogels for Multifunctional Composites

Stemming from the unique in-plane honeycomb lattice structure and the sp2 hybridized carbon atoms bonded by exceptionally strong carbon-carbon bonds, graphene exhibits remarkable anisotropic electrical, mechanical, and thermal properties. To maximize the utilization of graphene's in-plane properties, pre-constructed and aligned structures, such as oriented aerogels, films, and fibers, have been designed. The unique combination of aligned structure, high surface area, excellent electrical conductivity, mechanical stability, thermal conductivity, and porous nature of highly aligned graphene aerogels allows for tailored and enhanced performance in specific directions, enabling advancements in diverse fields. This review provides a comprehensive overview of recent advances in highly aligned graphene aerogels and their composites. It highlights the fabrication methods of aligned graphene aerogels and the optimization of alignment which can be estimated both qualitatively and quantitatively. The oriented scaffolds endow graphene aerogels and their composites with anisotropic properties, showing enhanced electrical, mechanical, and thermal properties along the alignment at the sacrifice of the perpendicular direction. This review showcases remarkable properties and applications of aligned graphene aerogels and their composites, such as their suitability for electronics, environmental applications, thermal management, and energy storage. Challenges and potential opportunities are proposed to offer new insights into prospects of this material.

Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management

Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.

A humidity/thermal dual response 3D-fabric with porous poly(N-isopropyl acrylamide) hydrogel towards efficient atmospheric water harvesting

Atmospheric water harvesting is a promising approach for obtaining freshwater resources, but achieving high levels of light absorption, hygroscopic capacity, and desorption efficiency simultaneously remains a challenge. In this study, we developed an innovative atmospheric water harvester that incorporates a poly(N-isopropylacrylamide) hydrogel and a polydopamine/polypyrrole-modified 3D raised-fabric. The interlacing structure and polydopamine/polypyrrole synergistically enhance the harvester's photothermal conversion capability, while the hydrogel-modified raised-fabric with its increased pore structure and high specific surface area ensures effective contact between the internal adsorbent and external moisture, thereby improving moisture capture and storage capacity. Our results indicate that the hydrogel-modified 3D raised-fabric has excellent photothermal conversion performance, as evidenced by its rapid temperature rise to 75.9 °C under 1 sun light intensity, which effectively promotes water evaporation and harvesting. Furthermore, the 3D raised-fabric exhibits exceptional water absorption (3.1 g g-1, RH 90%) and water desorption (1.75 kg m-2h-1, 1 sun) properties. Overall, the 3D raised-fabric with its integrated photothermal, hygroscopic, and hydrophobic properties can effectively collect water under low humidity conditions, making it a promising solution for water scarcity issues.

Ionization Engineering of Hydrogels Enables Highly Efficient Salt-Impeded Solar Evaporation and Night-Time Electricity Harvesting

Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization. Hydrogels, as a tunable material platform from the molecular level to the macroscopic scale, have been considered the most promising candidate for solar evaporation. However, the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck, restricting the widespread application. Herein, we report ionization engineering, which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules, fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine. The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers. The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m-2 h-1 in 20 wt% brine with 95.6% efficiency under one sun irradiation, surpassing most of the reported literature. More notably, such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation. Meantime, on the basis of the cation selectivity induced by the electronegativity, we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night, anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.

Advances in photothermal regulation strategies: from efficient solar heating to daytime passive cooling

Photothermal regulation concerning solar harvesting and repelling has recently attracted significant interest due to the fast-growing research focus in the areas of solar heating for evaporation, photocatalysis, motion, and electricity generation, as well as passive cooling for cooling textiles and smart buildings. The parallel development of photothermal regulation strategies through both material and system designs has further improved the overall solar utilization efficiency for heating/cooling. In this review, we will review the latest progress in photothermal regulation, including solar heating and passive cooling, and their manipulating strategies. The underlying mechanisms and criteria of highly efficient photothermal regulation in terms of optical absorption/reflection, thermal conversion, transfer, and emission properties corresponding to the extensive catalog of nanostructured materials are discussed. The rational material and structural designs with spectral selectivity for improving the photothermal regulation performance are then highlighted. We finally present the recent significant developments of applications of photothermal regulation in clean energy and environmental areas and give a brief perspective on the current challenges and future development of controlled solar energy utilization.

Micro-Nano Water Film Enabled High-Performance Interfacial Solar Evaporation

Interfacial solar evaporation holds great promise to address the freshwater shortage. However, most interfacial solar evaporators are always filled with water throughout the evaporation process, thus bringing unavoidable heat loss. Herein, we propose a novel interfacial evaporation structure based on the micro-nano water film, which demonstrates significantly improved evaporation performance, as experimentally verified by polypyrrole- and polydopamine-coated polydimethylsiloxane sponge. The 2D evaporator based on the as-prepared sponge realizes an enhanced evaporation rate of 2.18 kg m-2 h-1 under 1 sun by fine-tuning the interfacial micro-nano water film. Then, a homemade device with an enhanced condensation function is engineered for outdoor clean water production. Throughout a continuous test for 40 days, this device demonstrates a high water production rate (WPR) of 15.9-19.4 kg kW-1 h-1 m-2. Based on the outdoor outcomes, we further establish a multi-objective model to assess the global WPR. It is predicted that a 1 m2 device can produce at most 7.8 kg of clean water per day, which could meet the daily drinking water needs of 3 people. Finally, this technology could greatly alleviate the current water and energy crisis through further large-scale applications.

2D MXenes Embedded Perovskite Hydrogels for Efficient and Stable Solar Evaporation

Solar evaporation is a facile and promising technology to efficiently utilize renewable energy for freshwater production and seawater desalination. Here, the fabrication of self-regenerating hydrogel composed of 2D-MXenes nanosheets embedded in perovskite La 0.6Sr 0.4Co 0.2Fe 0.8O3- δ (LSCF)/polyvinyl alcohol hydrogels for efficient solar-driven evaporation and seawater desalination is reported. The mixed dimensional LSCF/Ti3C2 composite features a localized surface plasmonic resonance effect in the polymeric network of polyvinyl alcohol endows excellent evaporation rates (1.98 kg m-2 h-1) under 1 k Wm-2 or one sun solar irradiation ascribed by hydrophilicity and broadband solar absorption (96%). Furthermore, the long-term performance reveals smooth mass change (13.33 kg m-2) during 8 h under one sun. The composite hydrogel prompts the dilution of concentrated brines and redissolves it back to water (1.2 g NaCl/270 min) without impeding the evaporation rate without any salt-accumulation. The present research offers a substantial opportunity for solar-driven evaporation without any salt accumulation in real-life applications.

Waterwheel-inspired rotating evaporator for efficient and stable solar desalination even in saturated brine

Solar desalination is one of the most promising technologies to address global freshwater shortages. However, traditional evaporators encounter the bottleneck of reduced evaporation rate or even failure due to salt accumulation in high-salinity water. Inspired by ancient waterwheels, we have developed an adaptively rotating evaporator that enables long-term and efficient solar desalination in brines of any concentration. The evaporator is a sulphide-loaded drum-type biochar. Our experiments and numerical simulations show that this evaporator, thanks to its low density and unique hydrophilic property, rotates periodically under the center-of-gravity shift generated by salt accumulation, achieving self-removal of salt. This allows it to maintain a high evaporation rate of 2.80 kg m-2 h-1 within 24 h even in saturated brine (26.47%), which was not achieved previously. This proof-of-concept work therefore demonstrates a concentration- and time-independent, self-rotation-induced solar evaporator.

Hydrothermally Modified 3D Porous Loofah Sponges with MoS2 Sheets and Carbon Particles for Efficient Solar Steam Generation and Seawater Desalination

Although the emerging interfacial solar steam generation technology is sustainable and eco-friendly for generating clean water by desalinating seawater and purifying wastewaters, salt deposition on the evaporation surface during solar-driven evaporation severely degrades the purification performances and adversely affect the long-term performance stability of solar steam generation devices. Herein, to construct solar steam generators for efficient solar steam generation and seawater desalination, three-dimensional (3D) natural loofah sponges with both macropores of the sponge and microchannels of the loofah fibers are hydrothermally decorated with molybdenum disulfide (MoS₂) sheets and carbon particles. Benefiting from fast upward transport of water, rapid steam extraction, and effective salt-resistant capacity, the 3D hydrothermally decorated loofah sponge with MoS₂ sheets and carbon particles (HLMC) with an exposed height of 4 cm can not only obtain heat by its top surface under the downward solar light irradiation based on the solar-thermal energy conversion but also gain environmental energy by its porous sidewall surface, achieving a competitive water evaporation rate of 3.45 kg m^-2 h^-1 under 1 sun irradiation. Additionally, the 3D HLMC evaporator exhibits long-term desalination stability during the solar-driven desalination of an aqueous salt solution with 3.5 wt % NaCl for 120 h without apparent salt deposition because of its dual type of pores and uneven structure distribution.

Self-Supporting Nanoporous Copper Film with High Porosity and Broadband Light Absorption for Efficient Solar Steam Generation

Solar steam generation (SSG) is a potential technology for freshwater production, which is expected to address the global water shortage problem. Some noble metals with good photothermal conversion performance have received wide concerns in SSG, while high cost limits their practical applications for water purification. Herein, a self-supporting nanoporous copper (NP-Cu) film was fabricated by one-step dealloying of a specially designed Al98Cu2 precursor with a dilute solid solution structure. In-situ and ex-situ characterizations were performed to reveal the phase and microstructure evolutions during dealloying. The NP-Cu film shows a unique three-dimensional bicontinuous ligament-channel structure with high porosity (94.8%), multi scale-channels and nanoscale ligaments (24.2 ± 4.4 nm), leading to its strong broadband absorption over the 200-2500 nm wavelength More importantly, the NP-Cu film exhibits excellent SSG performance with high evaporation rate, superior efficiency and good stability. The strong desalination ability of NP-Cu also manifests its potential applications in seawater desalination. The related mechanism has been rationalized based upon the nanoporous network, localized surface plasmon resonance effect and hydrophilicity.

Biomass-Printed Hybrid Solar Evaporator Derived from Bio-polluted Invasive Species, a Potential Step toward Carbon Neutrality

Biomass-based photothermal conversion is of great importance for solar energy utilization toward carbon neutrality. Herein, a hybrid solar evaporator is innovatively designed via UV-induced printing of pyrolyzed Kudzu biochar on hydrophilic cotton fabric (KB@CF) to integrate all parameters in a single evaporator, such as solar evaporation, salt collection, waste heat recovery for thermoelectricity, sieving oil emulsions, and water disinfection from microorganisms. The UV-induced printed fabric demonstrates stronger material adhesion as compared to the conventional dip-dry technique. The hybrid solar evaporator gives an enhanced evaporation rate (2.32 kg/m² h), and the complementary waste heat recovery system generates maximum open-circuit voltage (V_out ∼ 143.9 mV) and solar to vapor conversion efficiency (92%), excluding heat losses under one sun illumination. More importantly, 99.98% of photothermal-induced bacterial killing efficiency was achieved within 20 min under 1 kW m^-2 using the hyperthermia effect of Kudzu biochar. Furthermore, numerical heat-transfer simulations were performed successfully to analyze the enhanced interfacial heat accumulation (75.3 °C) and heat flux distribution of the thermoelectric generators under one sun. We firmly believe that the safe use of bio-polluted invasive species in hybrid solar-driven evaporation systems eases the environmental pressure toward carbon neutrality.

Fibrous Aerogels with Tunable Superwettability for High-Performance Solar-Driven Interfacial Evaporation

Solar-driven interfacial evaporation is an emerging technology for water desalination. Generally, double-layered structure with separate surface wettability properties is usually employed for evaporator construction. However, creating materials with tunable properties is a great challenge because the wettability of existing materials is usually monotonous. Herein, we report vinyltrimethoxysilane as a single molecular unit to hybrid with bacterial cellulose (BC) fibrous network, which can be built into robust aerogel with entirely distinct wettability through controlling assembly pathways. Siloxane groups or carbon atoms are exposed on the surface of BC nanofibers, resulting in either superhydrophilic or superhydrophobic aerogels. With this special property, single component-modified aerogels could be integrated into a double-layered evaporator for water desalination. Under 1 sun, our evaporator achieves high water evaporation rates of 1.91 and 4.20 kg m-2 h-1 under laboratory and outdoor solar conditions, respectively. Moreover, this aerogel evaporator shows unprecedented lightweight, structural robustness, long-term stability under extreme conditions, and excellent salt-resistance, highlighting the advantages in synthesis of aerogel materials from the single molecular unit.

Recent advances in the synthesis and electrocatalytic application of MXene materials

MXenes are a class of two-dimensional materials with a graphene-like structure, which have excellent optical, biological, thermodynamic, electrical and magnetic properties. Due to the diversity resulting from the combination of transition metals and C/N, the MXene family has expanded to more than 30 members and been applied in many fields with broad application prospects. Among their applications, electrocatalytic applications have achieved many breakthroughs. Therefore, in this review, we summarize the reports on the preparation of MXenes and their application in electrocatalysis published in the last five years and describe the two main methods for the preparation of MXenes, i.e., bottom-up and top to bottom synthesis. Different methods may change the structure or surface termination of MXenes, and accordingly affect their electrocatalytic performance. Furthermore, we highlight the application of MXenes in the electrocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂RR), nitrogen reduction reaction (NRR), and multi-functionalization. It can be concluded that the electrocatalytic properties of MXenes can be modified by changing the type of functional groups or doping. Also, MXenes can be compounded with other materials to produce electronic coupling and improve the catalytic activity and stability of the resulting composites. In addition, Mo₂C and Ti₃C₂ are two types of MXene materials that have been widely studied in the field of electrocatalysis. At present, research on the synthesis of MXenes is focused on carbides, whereas research on nitrides is rare, and there are no synthesis methods meeting the requirements of green, safety, high efficiency and industrialization simultaneously. Therefore, it is very important to explore environmentally friendly industrial production routes and devote more research efforts to the synthesis of MXene nitrides.

Fabrication and Application of Ag, Black TiO2 and Nitrogen-Doped 3D Reduced Graphene Oxide (3D Black TiO2/Ag/N@rGO) Evaporator for Efficient Steam Generation

The scarcity of fresh water, which is aggravated by rapid economic development and population growth, is a major threat to the modern world. Solar-driven interfacial desalination and steam generation is a promising strategy that localizes heat at the air-water interface through appropriate thermal management and demonstrates efficient photothermal performance. In the current study, Ag, black TiO2, and nitrogen-doped 3D reduced graphene oxide (3D black TiO2/Ag/N@rGO) hierarchical evaporator was fabricated, and its morphology, elemental composition, porosity, broadband solar absorption potential, photothermal performance, and interfacial desalination potential were assessed. The 3D solar evaporator showed efficient solar absorption over the entire broadband UV-visible near-infrared (UV-Vis NIR) region and demonstrated 99% photothermal conversion efficiency and potential freshwater generation of 1.43 kg·m−2 h−1. The specific surface area and porosity analyses demonstrated an ultrahigh specific surface area, high pore volume, and a mesoporous structure, with a predominant pore diameter of 4 nm. The strong photothermal performance can be attributed to the nitrogen doping of the rGO, which boosted the electrocatalytic and photothermal activity of the graphene through the activation of the excess free-flowing π electrons of the sp2 configuration of the graphene; the broadband solar absorption potential of the black TiO2; and the localized surface plasmon resonance effect of the AgNPs, which induced hot electron generation and enhanced photothermal conversion. Hence, the high photothermal conversion efficiency attained can be attributed to the synergistic photothermal performances of the individual components and the high interfacial surface area, abundant heat, and mass transfer microcavities of the 3D hierarchical porous solar absorber, offering multiple reflections of light and enhanced solar absorption. The study highlights the promising potential of the 3D evaporator for real-word interfacial desalination of seawater, helping to solve the water shortage problem sustainably.

Multifunctional MoSe2 @MXene Heterostructure-Decorated Cellulose Fabric for Wearable Thermal Therapy

A booming demand for wearable electronic devices urges the development of multifunctional smart fabrics. However, it is still facing a challenge to fabricate multifunctional smart fabrics with satisfactory mechanical property, excellent Joule heating performance, highly efficient photothermal conversion, outstanding electromagnetic shielding effectiveness, and superior anti-bacterial capability. Here, a MoSe₂ @MXene heterostructure-based multifunctional cellulose fabric is fabricated by depositing MXene nanosheets onto cellulose fabric followed by a facile hydrothermal method to grow MoSe₂ nanoflakes on MXene layers. A low-voltage Joule heating therapy platform with rapid Joule heating response (up to 230 °C in 25 s at a supplied voltage of 4 V) and stable performance under repeated bending cycles (up to 1000 cycles) is realized. Besides, the multifunctional fabric also exhibits excellent photothermal performance (up to 130 °C upon irradiation for 25 s with a light intensity of 400 mW cm^-2 ), outstanding electromagnetic interference shielding effectiveness (37 dB), and excellent antibacterial performances (>90% anti-bacterial rate toward Escherichia coli, Bacillus subtilis, and Staphylococcus aureus). This work offers an efficient avenue to fabricate multifunctional wearable thermal therapy devices for mobile healthcare and personal thermal management.

Applications of advanced MXene-based composite membranes for sustainable water desalination

MXenes are an innovative class of 2D nanostructured materials gaining popularity for various uses in medicine, chemistry, and the environment. A larger outer layer area, exceptional stability and conductivity of heat, high porosity, and environmental friendliness are all characteristics of MXenes and their composites. As a result, MXenes have been used to produce Li-ion batteries, semiconductors, water desalination membranes, and hydrogen storage. MXenes have recently been used in many environmental remediations, frequently surpassing conventional materials, to treat groundwater contamination, surface waters, industrial and municipal wastewaters, and desalination. Due to their outstanding structural characteristics and the enormous specific surface area, they are widely utilized as adsorbents or membrane materials for the desalination of seawater. When used for electrochemical applications, MXene-composites can deionize via Faradaic capacitive deionization (CDI) and adsorb various organic and inorganic pollutants to treat the water. In general, as compared to other 2D nanomaterials, MXene has superb characteristics; because of their magnificent characteristics and they exhibit strong desalination capability. The current review paper discusses the desalination capability of MXenes and their composites. Focusing on the desalination capacity of MXene-based nanomaterials, this study discusses the characteristics and synthesis techniques of MXenes their composites along with their ion-rejection capability and pervaporation desalination of water via MXene-based membranes, capacitive deionization capability, solar desalination capability. Furthermore, the challenges and prospects of MXenes and their composites are highlighted.

Flexible PTh/GQDs/TiO2 composite with superior visible-light photocatalytic properties for rapid degradation pollutants

Flexible fiber membranes for pollutant removal have received increasing attention due to their high adsorption performance and easy recycling characteristics. However, due to the lack of environmentally friendly regeneration, some adsorption membranes have low regeneration efficiency, especially in terms of chemical adsorption, so they lack reusability. This study prepares a series of conducting polymer [PAn (polyaniline) or PPy (polypyrrole) or PTh (polythiophene)] graphene quantum dots (GQDs, the size of GQDs is about 20 nm)/TiO₂ ternary fiber membranes via a facile electrospinning method with chemical deposition. Remarkably, this creates an anatase TiO₂ and π-conjugated system. The combination is beneficial to the photocatalytic degradation of organic pollutants, showing synergistic promotion in both the degradation rate and the degree of decomposition. The UV-vis test shows that the combination of GQDs broadens the optical response threshold of TiO₂, from near ultraviolet region excitation to visible region excitation. At the same time, the conductive polymer load further reduces the energy required for photogenerated electron transfer, which theoretically improves the degradation effect. Photocatalytic degradation tests showed that the PTh/GQDs/TiO₂ fiber membrane exhibited significant high photocatalytic activity of visible-light in the methylene blue (MB) and TC degradation. The degradation rate level is 92.90% and 80.58%, respectively and the MB removal is more than 4 times that of bare TiO₂ membrane. After photocatalytic regeneration four times, the regeneration efficiency can be maintained above 95%. Notably, various experimental results show that the interface charge transfer mechanism between GQDs/TiO₂ and PTh follows the Z-scheme heterojunction, which maximizes the retention of strong reducing electrons and oxidation holes. In the degradation, the active species of ·O₂ ^- and ·OH, make different contributions in the photocatalysts, which oxidize and break down the pollutant molecules into small molecules and then to harmless substances. According to the electronegativity difference of the material itself, PTh acts as electron acceptor in the degradation system, and TiO₂ fiber membrane doped with GQDs acts as electron donor. The present research, not only offers feasibility of the PTh/GQDs/TiO₂ flexible fiber membrane as an environment-friendly catalyst, but also motivates researchers to develop flexible fiber materials for future photocatalytic technology.

Nature-Inspired 3D Spiral Grass Structured Graphene Quantum Dots/MXene Nanohybrids with Exceptional Photothermal-Driven Pseudo-Capacitance Improvement

Solar-thermal conversion is considered as a green and simple means to improve the performance of energy storage materials, but often limited by the intrinsic photothermal properties of materials and crude structure design. Herein, inspired by the unique light trapping effect of wide leaf spiral grass during photosynthesis, a biomimetic structural photothermal energy storage system is developed, to further promote the solar thermal-driven pseudo capacitance improvement. In this system, three-dimensional printed tortional Kelvin cell arrays structure with interesting light trapping property functions as "spiral leaf blades" to improve the efficiency of light absorption, while graphene quantum dots/MXene nanohybrids with wide photothermal response range and strong electrochemical activity serve as "chloroplast" for photothermal conversion and energy storage. As expected, the biomimetic structure-enhanced photothermal supercapacitor achieves an ideal solar thermal-driven pseudo capacitance enhancement (up to 304%), an ultrahigh areal capacitance of 10.47 F cm^-2 , remarkable photothermal response (surface temperature change of 50.1 °C), excellent energy density (1.18 mWh cm^-2 ) and cycling stability (10000 cycles). This work not only offers a novel enhancement strategy for photothermal applications, but also inspires new structure designs for multifunctional energy storage and conversion devices.

Recent Advancements on Photothermal Conversion and Antibacterial Applications over MXenes-Based Materials

HIGHLIGHTS

Fabrication, characterizations and photothermal properties of MXenes are systematically described. Photothermal-derived antibacterial performances and mechanisms of MXenes-based materials are summarized and reviewed. Recent advances in the derivative applications relying on antibacterial properties of MXenes-based materials, including in vitro and in vivo sterilization, solar water evaporation and purification, and flexible antibacterial fabrics, are investigated.

ABSTRACT

The pernicious bacterial proliferation and emergence of super-resistant bacteria have already posed a great threat to public health, which drives researchers to develop antibiotic-free strategies to eradicate these fierce microbes. Although enormous achievements have already been achieved, it remains an arduous challenge to realize efficient sterilization to cut off the drug resistance generation. Recently, photothermal therapy (PTT) has emerged as a promising solution to efficiently damage the integrity of pathogenic bacteria based on hyperthermia beyond their tolerance. Until now, numerous photothermal agents have been studied for antimicrobial PTT. Among them, MXenes (a type of two-dimensional transition metal carbides or nitrides) are extensively investigated as one of the most promising candidates due to their high aspect ratio, atomic-thin thickness, excellent photothermal performance, low cytotoxicity, and ultrahigh dispersibility in aqueous systems. Besides, the enormous application scenarios using their antibacterial properties can be tailored via elaborated designs of MXenes-based materials. In this review, the synthetic approaches and textural properties of MXenes have been systematically presented first, and then the photothermal properties and sterilization mechanisms using MXenes-based materials are documented. Subsequently, recent progress in diverse fields making use of the photothermal and antibacterial performances of MXenes-based materials are well summarized to reveal the potential applications of these materials for various purposes, including in vitro and in vivo sterilization, solar water evaporation and purification, and flexible antibacterial fabrics. Last but not least, the current challenges and future perspectives are discussed to provide theoretical guidance for the fabrication of efficient antimicrobial systems using MXenes. [Image: see text]

Interfused core-shell heterogeneous graphene/MXene fiber aerogel for high-performance and durable electromagnetic interference shielding

Flexible, lightweight, and durable electromagnetic interference (EMI) shielding materials are urgently required to solve the increasingly serious electromagnetic radiation pollution. Transition metal carbides/nitrides (MXenes) are promising candidates for EMI shielding materials because of their excellent metallic electrical conductivity. However, MXenes are highly susceptible to oxidization when exposed to wet environments, leading to the loss of their functional properties and degradation of reliability and stability. Herein, an interfused core-shell heterogeneous reduced graphene oxide (rGO)/MXene aerogel (GMA) is designed for the first time via coaxial wet spinning and freeze-drying. The fabricated GMAs exhibit excellent EMI shielding performance, and the EMI shielding effectiveness (SE) and specific EMI SE can be up to 83.3 dB and 3119 dB·cm³/g, respectively, which is higher than most carbon-based and MXene-based aerogels and foams. More importantly, GMAs have only a 17.4 % degradation in EMI shielding performance after 120 days due to the protection of hydrophobic graphene sheath, exhibiting superior EMI shielding durability to its MXene film counterpart. Moreover, the hydrophobic GMAs exhibit good oil/water separation and thermal insulation performance. The interfused core-shell GMAs are highly promising for applications in durable EMI shielding, thermal insulation, oil/water separation and sensors, etc.

Recent Advances in Water Harvesting: A Review of Materials, Devices and Applications

Water is essential for life. However, water scarcity is becoming one of the most severe issues worldwide in terms of its potential impacts. There are diverse forms of water on earth and water harvesting from them is quite feasible to access more fresh water for drinking, sanitation and irrigation. In this review, we summarize the recent technologies of various water harvesters, based on different forms of water resources, aiming to improve the water harvesting systems. We mainly address three points: forming principles of different water circumstance, working mechanism of typical water harvesters, and the challenges and future research orientations. This systemic review on recent technologies in water harvesting provides insight into the sustainable water resources, water supply, and water collecting systems for the future.