Fluorescence lifetime reference standards for the range 0.189 to 115 nanoseconds

Picosescond fluorescence lifetime standards for frequency- and time-domain fluorescence

We characterized a series of dimethylamino-stilbene derivatives as standards for time-domain and frequency-domain lifetime measurements. The substances have reasonable quantum yields, are soluble in solvents available with a high purity, and do not show significant sensitivity to oxygen quenching. All the fluorophores displayed single exponential intensity decays, as characterized by frequency-domain measurements to 10 GHz. The decay times vary from 880 to 57 ps, depending on structure, solvent, and temperature, which is a useful range for modern picosecond time-domain or gigahertz frequency-domain instruments. These fluorophores may be used either to test an instrument or as reference compounds to eliminate color effects. We also characterized two-fluorophore mixtures, with the decay times spaced twofold (150 and 300 ps), with varying proportions. These mixtures are useful for testing the resolution of other time- and frequency-domain instrumentation. The excitation wavelength ranges from 260 to 430 nm, and the emission from 350 to 550 nm. The decay times are independent of the excitation and emission wavelengths.

Quantification of cell volume changes upon hyperosmotic stress in Saccharomyces cerevisiae

Cell volume is a biophysical property, which is of great importance for quantitative characterisations of biological processes, such as osmotic adaptation. It also is a crucial parameter in the most common type of mathematical description of cellular behaviour-ordinary differential equation (ODE) models, e.g. the integrative model of the osmotic stress response in baker's yeast (E. Klipp, B. Nordlander, R. Kruger, P. Gennemark and S. Hohmann, Nat. Biotechnol., 2005, 23, 975-982). Until recently only rough estimates of this value were available. In this study we measured the mean volume of more than 300 individual yeast cells (Saccharomyces cerevisiae). We quantitatively characterised the dependence between the relative cell volume and the concentration of osmoticum in the cell surrounding. We also followed the recovery of the cellular volume over time, as well as the influence of increased external osmolarity on the nuclear volume. We found that cell shrinkage caused by shifts in the external osmolarity is proportional to the stress intensity only up to 1000 mM NaCl. At this concentration the yeast cells shrink to approximately 55% of their unstressed volume and this volume is maintained even in the case of further osmolarity increase. We observed that returning to the initial, unstressed volume takes more than 45 minutes for stress concentrations exceeding 100 mM NaCl and that only cells treated with the latter concentration are able to fully regain their initial size within the course of the experiment. We postulate that the cytoplasm plays a protective role for the nucleus by buffering the changes in volume caused by external osmolarity shifts. In conclusion, we quantitatively characterised the dynamics of cell volume changes caused by hyperosmotic stress, providing an accurate description of a biophysical cell property, which is crucial for precise mathematical simulations of cellular processes.

Fluorescence standards: Classification, terminology, and recommendations on their selection, use, and production (IUPAC Technical Report)

Chromophore-based fluorescence standards for the characterization of photo-luminescence measuring systems and the determination of relevant fluorometric quantities are classified according to their scope and area of application. General and type-specific requirements for suitable standards are derived for each class of standards. Metrological requirements linked to the realization of comparable measurements are addressed and recommendations on selecting, using, and developing fluorescence standards are given.

Long wavelength fluorescence lifetime standards for front-face fluorometry

With the increased development and use of fluorescence lifetime-based sensors, fiber optic sensors, fluorescence lifetime imaging microscopy (FLIM), and plate and array readers, , calibration standards are essential to ensure the proper function of these devices and accurate results. For many devices that utilize a "front face excitation" geometry where the excitation is nearly coaxial with the direction of emission, scattering-based lifetime standards are problematic and fluorescent lifetime standards are necessary. As more long wavelength (red and near-infrared) fluorophores are used to avoid background autofluorescence, the lack of lifetime standards in this wavelength range has only become more apparent . We describe an approach to developing lifetime standards in any wavelength range, based on Förster resonance energy transfer (FRET). These standards are bright, highly reproducible, have a broad decrease in observed lifetime, and an emission wavelength in the red to near infrared making them well suited for the laboratory and field applications as well. This basic approach can be extended to produce lifetime standards for other wavelength regimes.

Fluorescence lifetime standards for time and frequency domain fluorescence spectroscopy

A series of fluorophores with single-exponential fluorescence decays in liquid solution at 20 degrees C were measured independently by nine laboratories using single-photon timing and multifrequency phase and modulation fluorometry instruments with lasers as excitation source. The dyes that can serve as fluorescence lifetime standards for time-domain and frequency-domain measurements are all commercially available, are photostable under the conditions of the measurements, and are soluble in solvents of spectroscopic quality (methanol, cyclohexane, water). These lifetime standards are anthracene, 9-cyanoanthracene, 9,10-diphenylanthracene, N-methylcarbazole, coumarin 153, erythrosin B, N-acetyl-l-tryptophanamide, 1,4-bis(5-phenyloxazol-2-yl)benzene, 2,5-diphenyloxazole, rhodamine B, rubrene, N-(3-sulfopropyl)acridinium, and 1,4-diphenylbenzene. At 20 degrees C, the fluorescence lifetimes vary from 89 ps to 31.2 ns, depending on fluorescent dye and solvent, which is a useful range for modern pico- and nanosecond time-domain or mega- to gigahertz frequency-domain instrumentation. The decay times are independent of the excitation and emission wavelengths. Dependent on the structure of the dye and the solvent, the excitation wavelengths used range from 284 to 575 nm, the emission from 330 to 630 nm. These lifetime standards may be used to either calibrate or test the resolution of time- and frequency-domain instrumentation or as reference compounds to eliminate the color effect in photomultiplier tubes. Statistical analyses by means of two-sample charts indicate that there is no laboratory bias in the lifetime determinations. Moreover, statistical tests show that there is an excellent correlation between the lifetimes estimated by the time-domain and frequency-domain fluorometries. Comprehensive tables compiling the results for 20 (fluorescence lifetime standard/solvent) combinations are given.

Time-domain laser-induced fluorescence spectroscopy apparatus for clinical diagnostics

We report the design and development of a compact optical fiber-based apparatus for in situ time-resolved laser-induced fluorescence spectroscopy (tr-LIFS) of biological systems. The apparatus is modular, optically robust, and compatible with the clinical environment. It incorporates a dual output imaging spectrograph, a gated multichannel plate photomultiplier (MCP-PMT), an intensified charge-coupled-device (ICCD) camera, and a fast digitizer. It can accommodate various types of light sources and optical fiber probes for selective excitation and remote light delivery/collection as required by different applications. The apparatus allows direct recording of the entire fluorescence decay with high sensitivity (nM range fluorescein dye concentration with signal-to-noise ratio of 46) and with four decades dynamic range. It is capable of resolving a broad range of fluorescence lifetimes from hundreds of picoseconds (as low as 300 ps) using the MCP-PMT coupled to the digitizer to milliseconds using the ICCD. The data acquisition and analysis process is fully automated, enabling fast recording of fluorescence intensity decay across the entire emission spectrum (0.8 s per wavelength or ~40 s for a 200 nm wavelength range at 5 nm increments). The spectral and temporal responses of the apparatus were calibrated and its performance was validated using fluorescence lifetime standard dyes (Rhodamin B, 9-cyanoanthracene, and rose Bengal) and tissue endogenous fluorophores (elastin, collagen, nicotinamide adenine dinucleotide, and flavin adenine dinucleotide). Fluorescence decay lifetimes and emission spectra of all tested compounds measured with the current tr-LIFS apparatus were found in good agreement with the values reported in the literature. The design and performance of tr-LIFS apparatus have enabled in vivo studies of atherosclerotic plaques and brain tumors.

Fluorescence lifetime imaging of calcium using Quin-2

We describe the use of a new imaging technology, fluorescence lifetime imaging (FLIM), for the imaging of the calcium concentrations based on the fluorescence lifetime of a calcium indicator. The fluorescence lifetime of Quin-2 is shown to be highly sensitive to [Ca2+]. We create two-dimensional lifetime images using the phase shift and modulation of the Quin-2 in response to intensity-modulated light. The two-dimensional phase and modulation values are obtained using a gain-modulated image intensifier and a slow-scan CCD camera. The lifetime values in the 2D image were verified using standard frequency-domain measurements. Importantly, the FLIM method does not require the probe to display shifts in the excitation or emission spectra, which may allow Ca2+ imaging using other Ca2+ probes not in current widespread use due to the lack of spectral shifts. Fluorescence lifetime imaging can be superior to stationary (steady-state) imaging because lifetimes are independent of the local probe concentration and/or intensity, and should thus be widely applicable to chemical imaging using fluorescence microscopy.

Frequency-domain fluorescence spectroscopy resolves the location of maleimide-directed spectroscopic probes within the tertiary structure of the Ca-ATPase of sarcoplasmic reticulum

We have used fluorescence spectroscopy to characterize three covalently bound spectroscopic maleimide derivatives with respect to their location within the tertiary structure of the Ca-ATPase of sarcoplasmic reticulum (SR). These derivatives include (1) 2-(4'-maleimidoanilino)naphthalene-6-sulfonic acid, (2) 4-(dimethylamino)azobenzene-4'-maleimide, and (3) fluorescein 5'-maleimide. Biochemical assays demonstrate that modification with any of these three derivatives results in the same functional effects, observed following derivatization of cysteines 344 and 364 by N-ethylmaleimide [Saito-Nakatsuka et al. (1987) J. Biochem. (Tokyo) 101, 365-376]. These residues bracket the ATPase's phosphorylation site (Asp 351) and thus may provide spectroscopic probes of the protein's conformation in this essential region. In agreement with sequencing results, SDS-polyacrylamide gels show that maleimide-modified SR exhibits fluorescence exclusively on the A1 tryptic fragment of the Ca-ATPase. Extensive tryptic digestion followed by centrifugation demonstrates essentially all of the fluorescence was associated with the soluble rather than insoluble (membrane-associated) peptides, confirming the predicted extramembranous location of these residues. Utilizing frequency-domain fluorescence spectroscopy, we were able to recover the transient effects associated with a distribution of donor-acceptor distances. We find from these fluorescence resonance energy transfer measurements that covalently bound maleimide probes are 36 A apart, independent of whether a discrete distance is assumed or a distance distribution model is utilized, in which the conformational variability of the protein is taken into account. While a unimodal distance distribution is adequate to describe the intensity decay associated with maleimide-directed donor-acceptor pairs, a bimodal distribution of distances is necessary to describe the frequency response associated with the energy transfer between maleimide-directed chromophores and other covalently bound probes on the Ca-ATPase, consistent with the large spatial separation observed between maleimides. We recover mean distances of 42 and 77 A between maleimide sites and bound FITC (Lys 515) and mean distances of 28 and 37 A between the maleimide- and the iodoacetamide-directed probes (Cys 670 and 674, whose close proximity approximates a single locus). The measured distances are presented in a model and have permitted us to describe a unique arrangement of these covalently bound probes within both the secondary and tertiary structure of the Ca-ATPase. The resolution inherent in the frequency-domain fluorescence technique to multiple donor-acceptor distances should be generally applicable to a wide range of biological systems in which specific labeling of single unique donor-acceptor sites is not feasible.

Approach for a quantitative on-the-fly fluorescence diagnostic in combustion systems

The combination of a megahertz repetition rate, picosecond dye laser and gated photon counting detection is used to obtain sodium atom fluorescence lifetimes in seeded atmospheric pressure CH(4)/O(2)/diluent flames. Data acquisition times as short as 1 ms (on-the-fly) are demonstrated with a 3.8-MHz laser rep rate. The area under the fluorescence temporal profiles following laser excitation divided by the fluorescence lifetime is shown to provide a measure of sodium concentration independent of quenching environment.

Ligand-triggered conformational perturbations elicit changes at the single cysteinyl residue of spinach calmodulin

Following application of stoichiometric amounts of Ca2+ or specific partner peptides to spinach calmodulin, dynamic changes in the nanosecond range could be monitored at a strategically anchored fluorescence or spin probe. For these studies the single cysteinyl residue 26 of spinach calmodulin was labelled with a thiol-specific proxyl (i.e. 2,2,5,5-tetramethyl-1-pyrrolidinyl-oxyl) spin probe or with a bimane fluorescence probe. With Ca2+ and a specific ligand (mastoparan) present, fluorescence studies (anisotropy, lifetime) indicated that the rotational motion of the protein complex becomes slower relative to the motion of calmodulin in the absence of the specific ligand. The probe's attachment site 26 appears to reside in a fairly polar microenvironment as reported by a series of proxyl spin probes varying in label length. The rotational correlation time of the shortest spin probe markedly changed upon binding of a specific peptide to a calmodulin region distant from that of the monitoring spin probe. We interpret these observations as indicating that ligand-triggered conformational perturbations are eliciting specific responses at the cysteinyl residue 26 of spinach calmodulin.

Plasma membrane fluidity measurements in intact endothelial cells: effect of hyperoxia on fluorescence anisotropies of 1-[4-(trimethylamino)phenyl]-6-phenyl hexa-1,3,5-triene

Fluorescence anisotropy measurements are widely used as sensitive indicators of cell membrane fluidity. 1-[4-(trimethylamino)phenyl]-6-phenyl hexa-1,3,5-triene (TMA-DPH) is a cationic fluorescent aromatic hydrocarbon that anchors at the lipid-water interface of membrane lipid bilayers. Its uptake into porcine pulmonary artery and aortic endothelial cells was monitored and the probe remained specifically localized on the cell surface for at least 4 h. It can therefore be recommended for use for specific plasma membrane lipid fluidity measurements in these cells. The effect of hyperoxia on plasma membrane fluidity was measured by using TMA-DPH. In both cell types, hyperoxic damage resulted in decreases in plasma membrane fluidity. Recovery was achieved 48 h after a 42-h hyperoxic exposure. These results indicate that TMA-DPH is a sensitive probe of plasma membrane lipid domains of pulmonary artery and aortic endothelial cells and that hyperoxia causes reversible changes in the physical state of superficial lipid domains of the plasma membrane of these cells.

The conformational changes of alpha 2-macroglobulin induced by methylamine or trypsin. Characterization by extrinsic and intrinsic spectroscopic probes

The conformational changes around the thioester-bond region of human or bovine alpha 2M (alpha 2-macroglobulin) on reaction with methylamine or trypsin were studied with the probe AEDANS [N-(acetylaminoethyl)-8-naphthylamine-1-sulphonic acid], bound to the liberated thiol groups. The binding affected the fluorescence emission and lifetime of the probe in a manner indicating that the thioester-bond region is partially buried in all forms of the inhibitor. In human alpha 2M these effects were greater for the trypsin-treated than for the methylamine-treated inhibitor, which both have undergone similar, major, conformational changes. This difference may thus be due to a close proximity of the thioester region to the bound proteinase. Reaction of trypsin with thiol-labelled methylamine-treated bovine alpha 2M, which retains a near-native conformation and inhibitory activity, indicated that the major conformational change accompanying the binding of proteinases involves transfer of the thioester-bond region to a more polar environment without increasing the exposure of this region at the surface of the protein. Labelling of the transglutaminase cross-linking site of human alpha 2M with dansylcadaverine [N-(5-aminopentyl)-5-dimethylaminonaphthalene-1-sulphonamide] suggested that this site is in moderately hydrophobic surroundings. Reaction of the labelled inhibitor with methylamine or trypsin produced fluorescence changes consistent with further burial of the cross-linking site. These changes were more pronounced for trypsin-treated than for methylamine-treated alpha 2M, presumably an effect of the cleavage of the adjacent 'bait' region. Solvent perturbation of the u.v. absorption and iodide quenching of the tryptophan fluorescence of human alpha 2M showed that one or two tryptophan residues in each alpha 2M monomer are buried on reaction with methylamine or trypsin, with no discernible change in the exposure of tyrosine residues. Together, these results indicate an extensive conformational change of alpha 2M on reaction with amines or proteinases and are consistent with several aspects of a recently proposed model of alpha 2M structure [Feldman, Gonias & Pizzo (1985) Proc. Natl. Acad. Sci. U.S.A. 82, 5700-5704].

Spectroscopic investigations on the binding site of bovine hepatic fatty acid binding protein. Evidence for the existence of a single binding site for two fatty acid molecules

The hydrophobic region of the binding site of a bovine fatty acid binding protein (pI 7.0-FABP) has been characterized using fluorescence and circular dichroism (CD) spectroscopy. Blue-shifts of fluorescence emission maxima and increased lifetimes of naphthylamine dyes, anthroyloxy-fatty acids, pyrene nonanoic acid and trans-parinaric acid indicated a hydrophobic interaction with FABP. The fluorescence quenching of various anthroyloxy-fatty acids by iodide and acrylamide showed lower accessibility to the fluorophore linked to the carbon adjacent to the carbonyl group and towards the methyl end of the fatty acid. Binding stoichiometries were different for fatty acids and their bulky fluorescent analogues. trans-Parinaric acid when bound to FABP showed a complex induced CD-spectrum, which is explained by a close proximity of two ligands in the same binding site. Fluorescent derivatives of phosphatidylcholine with trans-parinaric acid and cholesteryl trans-parinarate did not bind to FABP. Thus, the binding site appears to be constructed for high affinity binding of long chain fatty acids.

An automatic pulsed laser microfluorometer with high spatial and temporal resolution

The paper describes an automatic pulsed laser microfluorometer with high spatial and temporal resolution, developed in our laboratories. The instrument consists of: (i) a nitrogen-laser-pumped dye-laser for the excitation of the fluorescence, (ii) a microscope with additional optics to focus the excitation beam on the sample and to collect the fluorescence, (iii) filters or monochromators to select the output wavelength, (iv) a fast photomultiplier tube to detect the signal, and (v) a dual time-scale microprocessor-controlled signal averager for the acquisition and processing of the signal. Examples are given that show the potential of the time-resolved fluorescence microscopy in studying, quantitatively and qualitatively, the properties of fluorescent molecules.

Segmental mobility in glycogen phosphorylase b

The dynamics and structuredness of the pyridoxal 5'-phosphate-binding region in glycogen phosphorylase b (EC 2.4.1.1) has been investigated with different techniques of fluorescence spectroscopy. Fluorescence polarization data of the thermal Perrin plot indicate some mobility in the cofactor binding site, while the isothermic measurements (at 20 degrees C, in high-viscosity solvents) demonstrate that the mobile unit carrying the emission oscillator is practically insensitive to the external viscosity. Characteristics of the thermal Perrin plots obtained for both native and reduced phosphorylase b can be interpreted either as a freely moving cofactor in a medium of high viscosity (0.3 P) or as the motion of a unit larger than a lysine-bonded pyridoxal 5'-phosphate in a medium with the viscosity of water. Data for acrylamide quenching and time-resolved fluorescence measurements suggest that the latter interpretation should valid. These data also suggest a tightly packed microenvironment around the pyridoxal moiety.

Correction of timing errors in photomultiplier tubes used in phase-modulation fluorometry

The measurement of fluorescence lifetimes is known to be hindered by the wavelength-dependent and photocathode area-dependent time response of photomultiplier tubes. A simple and direct method is described to minimize these effects in photomultiplier tubes used for phase-modulation fluorometry. Reference fluorophores of known lifetime were used in place of the usual scattering reference. The emission wavelengths of the reference and sample were matched by either filters or a monochromator, and the use of a fluorophore rather than a scatterer decreases the differences in spatial distribution of light emanating from the reference and sample. Thus photomultiplier tube artifacts are minimized. Five reference fluorophores were selected on the basis of availability, ease of solution preparation, and constancy of lifetime with temperature and emission wavelength. These compounds are p-terphenyl, PPO, PPD, POPOP and dimethyl POPOP. These compounds are dissolved in ethanol to give standard solutions that can be used over the temperature range from -55 to +55 degrees C. Purging with inert gas is not necessary. The measured phase and modulation of the reference solution is used, in conjunction with the known reference lifetime, to calculate the actual phase and modulation of the excitation beam. The use of standard fluorophores does not require separate experiments to quantify photomultiplier effects, and does not increase the time required for the measurement of fluorescence lifetimes. Examples are presented which demonstrate the elimination of artifactual photomultiplier effects in measurements of the lifetimes of NADH (0.4 ns) and indole solutions quenched by iodide. In addition, the use of these reference solutions increases the accuracy of fluorescence lifetime measurements ranging to 30 ns. We judge this method to provide more reliable lifetime measurements by the phase and modulation method. The test solutions and procedures we describe may be used by other laboratories to evaluate the performance of their phase fluorometers.

Fluorescence properties of o-phthaldialdehyde derivatives of amino acids

The fluorescence properties of the products formed by reaction of o-phthaldialdehyde with amino acids and their derivatives, in the presence of thiol compounds, have been studied. The emission spectra, quantum yields, and lifetimes depend on the primary amine and thiol compound used; the observations confirm the report (Simsons, S.S., Jr. and Johnson, D.F. (1978) J. Org. Chem 43, 2886--2891) that the product incorporates molecules of all three types of compounds. The fluorescence quantum yields of o-phthaldialdehyde derivatives of the naturally occuring amino acids ranged from 0.33 to 0.47, using 2-mercaptoethanol as the thiol compound. The fluorescence lifetimes were about 18--20 ns. Lower quantum yields were obtained when mercaptoethanol was replaced by dithiothreitol or ethnethiol. Derivatives of amino acid amides and peptides had quantum yeilds as low as 0.03, due to quenching by the carboxamide group. The intramolecular quenching was relieved by the detergent, sodium dodecyl sulfate, and by dimethylsulfoxide. Monosubstituted lysine exhibited a normal fluorescence, but the di-substituted product was largely quenched, presumably due to interaction between the two isoindole fluorophors. Fluorscence stopped-flow experiments showed that the alpha- and epsilon-amino groups reacted at different rates, with the epsilon-amion group reacting 10 times faster, with a t 1/2 of about 6 s under pseudo first order conditions at pH 9.0 with 10(-3) M o-phthaldialdehyde. The amount of instability shown by the o-phthaldialdehyde derivatives depended on the thiol compound used, the primary amine involved, and the solvent. Cysteine and o-phthaldialdehyde reacted to give an unstable, weakly fluorescent product; but cysteine could be assayed normally if its sulfhydryl was blocked. The o-phthaldialdehyde reagent was discussed in relation to fluorescamine, another reagent for primary amines.

Interaction of extrinsic fluorescent probes with E. coli glutamine synthetase

Binding of 2-p-toluidinylnaphthalene-6-sulfonate (TNS) to adenylylated (E--11) glutamine synthetase is cooperative and time-dependent, with 3 dye sites per subunit. In fluorescence polarization experiments TNS and pyrene butyrate give normalized Perrin plots that indicate a symmetrical arrangement of dye excited state dipoles, relative to the rotational axis of the oblate ellipsoid of the dodecameric native enzyme.

Determination of quinidine in human serum in the presence of diuretics

A new method for the determination of quinidine in human serum by fluorometry is described. The interference of triamterene encountered with other methods is greatly reduced, whereas a number of other diuretics do not interfere at all. The specificity is based on quenching of the fluorescence of cinchona alkaloids by chloride ions. The method has good reproducibility and linearity, and gives a recovery of 98%. A serum sample of 0.1 ml is sufficient for the assay. Comparison with two other methods showed that this procedure yields the total amount of cinchona alkaloids present in serum, which makes it extremely useful for routine clinical analysis.