Single bilayer liposomes prepared without sonication

Liposomes as versatile agents for the management of traumatic and nontraumatic central nervous system disorders: drug stability, targeting efficiency, and safety

Various nanoparticle-based drug delivery systems for the treatment of neurological disorders have been widely studied. However, their inability to cross the blood-brain barrier hampers the clinical translation of these therapeutic strategies. Liposomes are nanoparticles composed of lipid bilayers, which can effectively encapsulate drugs and improve drug delivery across the blood-brain barrier and into brain tissue through their targeting and permeability. Therefore, they can potentially treat traumatic and nontraumatic central nervous system diseases. In this review, we outlined the common properties and preparation methods of liposomes, including thin-film hydration, reverse-phase evaporation, solvent injection techniques, detergent removal methods, and microfluidics techniques. Afterwards, we comprehensively discussed the current applications of liposomes in central nervous system diseases, such as Alzheimer's disease, Parkinson's disease, Huntington's disease, amyotrophic lateral sclerosis, traumatic brain injury, spinal cord injury, and brain tumors. Most studies related to liposomes are still in the laboratory stage and have not yet entered clinical trials. Additionally, their application as drug delivery systems in clinical practice faces challenges such as drug stability, targeting efficiency, and safety. Therefore, we proposed development strategies related to liposomes to further promote their development in neurological disease research.

Advances in the design and delivery of RNA vaccines for infectious diseases

RNA medicines represent a paradigm shift in treatment and prevention of critical diseases of global significance, e.g., infectious diseases. The highly successful messenger RNA (mRNA) vaccines against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) were developed at record speed during the coronavirus disease 2019 pandemic. A consequence of this is exceptionally shortened vaccine development times, which in combination with adaptability makes the RNA vaccine technology highly attractive against infectious diseases and for pandemic preparedness. Here, we review state of the art in the design and delivery of RNA vaccines for infectious diseases based on different RNA modalities, including linear mRNA, self-amplifying RNA, trans-amplifying RNA, and circular RNA. We provide an overview of the clinical pipeline of RNA vaccines for infectious diseases, and present analytical procedures, which are paramount for characterizing quality attributes and guaranteeing their quality, and we discuss future perspectives for using RNA vaccines to combat pathogens beyond SARS-CoV-2.

Rational formulation and industrial manufacturing of lipid-based complex injectables: Landmarks and trends

Lipid-based complex injectables are renowned for their effectiveness in delivering drugs, with many approved products. While significant strides have been made in formulating nanosystems for small molecular weight drugs, a pivotal breakthrough emerged with the recognition of lipid nanoparticles as a promising platform for delivering nucleic acids. This finding has paved the way for tackling long-standing challenges in molecular and delivery aspects (e.g., mRNA stability, intracellular delivery) that have impeded the clinical translation of gene therapy, especially in the realm of immunotherapy. Nonetheless, developing and implementing new lipid-based delivery systems pose significant challenges, as industrial manufacturing of these formulations often involves complex, multi-batch processes, giving rise to issues related to scalability, stability, sterility, and regulatory compliance. To overcome these obstacles, embracing the principles of quality-by-design (QbD) is imperative. Furthermore, adopting cutting-edge manufacturing and process analytical tools (PAT) that facilitate the transition from batch to continuous production is essential. Herein, the key milestones and insights derived from the development of currently approved lipid- nanosystems will be explored. Additionally, a comprehensive and critical overview of the latest technologies and regulatory guidelines that underpin the creation of more efficient, scalable, and flexible manufacturing processes for complex lipid-based nanoformulations will be provided.

The 60-year evolution of lipid nanoparticles for nucleic acid delivery

Delivery of genetic information to the interior of target cells in vivo has been a major challenge facing gene therapies. This barrier is now being overcome, owing in part to dramatic advances made by lipid-based systems that have led to lipid nanoparticles (LNPs) that enable delivery of nucleic acid-based vaccines and therapeutics. Examples include the clinically approved COVID-19 LNP mRNA vaccines and Onpattro (patisiran), an LNP small interfering RNA therapeutic to treat transthyretin-induced amyloidosis (hATTR). In addition, a host of promising LNP-enabled vaccines and gene therapies are in clinical development. Here, we trace this success to two streams of research conducted over the past 60 years: the discovery of the transfection properties of lipoplexes composed of positively charged cationic lipids complexed with nucleic acid cargos and the development of lipid nanoparticles using ionizable cationic lipids. The fundamental insights gained from these two streams of research offer potential delivery solutions for most forms of gene therapies.

Molecular localization and exchange kinetics in pharmaceutical liposome and mRNA lipoplex nanoparticle products determined by small angle X-ray scattering and pulsed field gradient NMR diffusion measurements

We have used pulsed field gradient (PFG)-NMR diffusion experiments, also known as DOSY, in combination with small angle X-ray scattering measurements to investigate structure and molecular exchange dynamics between pharmaceutical lipid nanoparticles and the bulk phase. Using liposomes and lipoplexes formed after complexation of the liposomes with messenger mRNA as test systems, information on dynamics of encapsulated water molecules, lipids and excipients was obtained. The encapsulated fraction, having a diffusivity similar to that of the liposomes, could be clearly identified and quantified by the NMR diffusion measurements. The unilamellar liposome membranes allowed a fast exchange of water molecules, while sucrose, used as an osmolyte and model solute, showed very slow exchange. Upon interactions with mRNA a topological transition from a vesicular to a lamellar organization took place, where the mRNA was inserted in repeating lipid bilayer stacks. In the lipoplexes, a small fraction of tightly bound water molecules was present, with a diffusivity that was influenced by the additional presence of sucrose. This extended information on dynamic coherencies inside pharmaceutical nanoparticle products, provided by the combined application of SAXS and PFG-NMR diffusion measurements, can be valuable for evaluation of quality and comparability of nanoscaled pharmaceuticals.

One-Step Formation Method of Plasmid DNA-Loaded, Extracellular Vesicles-Mimicking Lipid Nanoparticles Based on Nucleic Acids Dilution-Induced Assembly

We propose a nucleic acids dilution-induced assembly (NADIA) method for the preparation of lipid nanoparticles. In the conventional method, water-soluble polymers such as nucleic acids and proteins are mixed in the aqueous phase. In contrast, the NADIA method, in which self-assembly is triggered upon dilution, requires dispersion in an alcohol phase without precipitation. We then investigated several alcohols and discovered that propylene glycol combined with sodium chloride enabled the dispersion of plasmid DNA and protamine sulfate in the alcohol phase. The streamlined characteristics of the NADIA method enable the preparation of extracellular vesicles-mimicking lipid nanoparticles (ELNPs). Among the mixing methods using a micropipette, a syringe pump, and a microfluidic device, the lattermost was the best for decreasing batch-to-batch differences in size, polydispersity index, and transfection efficiency in HepG2 cells. Although ELNPs possessed negative ζ-potentials and did not have surface antigens, their transfection efficiency was comparable to that of cationic lipoplexes. We observed that lipid raft-mediated endocytosis and macropinocytosis contributed to the transfection of ELNPs. Our strategy may overcome the hurdles linked to supply and quality owing to the low abundance and heterogeneity in cell-based extracellular vesicles production, making it a reliable and scalable method for the pharmaceutical manufacture of such complex formulations.

Liposomes delivery systems of functional substances for precision nutrition

Natural bioactive compounds with antioxidant, antimicrobial, anticancer, and other biological activities are vital for maintaining the body's physiological functions and enhancing immunity. These compounds have great potential as nutritional therapeutic agents, but they can be limited due to their poor flavor, color, unstable nature, and poor water solubility, and degradation by gastrointestinal enzymes. Liposomes, as ideal carriers, can encapsulate both water-soluble and fat-soluble nutrients, enhance the bioavailability of functional substances, promote the biological activity of functional substances, and control the release of nutrients. Despite their potential, liposomes still face obstacles in nutrient delivery. Therefore, the design of liposomes for special needs, optimization of the liposome preparation process, enhancement of liposome encapsulation efficiency, and industrial production are key issues that must be addressed in order to develop food-grade liposomes. Moreover, the research on surface-targeted modification and surface functionalization of liposomes is valuable for expanding the scope of application of liposomes and achieving the release of functional substances from liposomes at the appropriate time and site. The establishment of in vivo and in vitro digestion models of nutrient-loaded liposomes, in-depth study of gastrointestinal digestive behavior after liposome ingestion, targeted nutrient release, and deciphering the nutritional intervention of human diseases and positive health promotion are promising fields with broad development prospects.

Production of Targeted Estrone Liposomes Using a Herringbone Micromixer

Liposomes are spherical vesicles formed from bilayer lipid membranes that are extensively used in targeted drug delivery as nanocarriers to deliver therapeutic reagents to specific tissues and organs in the body. Recently, we have reported using estrone as an endogenous ligand on doxorubicin-encapsulating liposomes to target estrogen receptor (ER)-positive breast cancer cells. Estrone liposomes were synthesized using the thin-film hydration method, which is a long, arduous, and multistep process. Here, we report using a herringbone micromixer to synthesize estrone liposomes in a simple and rapid manner. A solvent stream containing the lipids was mixed with a stream of phosphate buffer saline (PBS) inside a microchannel integrated with herringbone-shaped ridges that enhanced the mixing of the two streams. The small scale involved enabled rapid solvent exchange and initiated the self-assembly of the lipids to form the required liposomes. The effect of different parameters on liposome size, such as the ratio between the flow rate of the solvent and the buffer solutions (FRR), total flow rate, lipid concentrations, and solvent type, were investigated. Using this commercially available chip, we obtained liposomes with a radius of 66.1 ± 11.2 nm (mean ± standard deviation) and a polydispersity of 22% in less than 15 minutes compared to a total of  ∼  11 hours using conventional techniques. Calcein was encapsulated inside the prepared liposomes as a model drug and was released by applying ultrasound at different powers. The size of the prepared liposomes was stable over a period of one month. Overall, using microfluidics to synthesize estrone liposomes simplified the procedure considerably and improved the reproducibility of the resulting liposomes.

Imiquimod-Loaded Nanosystem for Treatment Human Papillomavirus-Induced Lesions

Human papillomavirus (HPV)-associated cervical cancer is the most common cancer among women worldwide. The treatment options are strongly related to increased infertility in women. Imiquimod (IQ) is an imidazoquinoline, which has proven antiviral effects against persistent HPV infection by activating immune cells via Toll-like receptors 7/8 when formulated in carriers, like nanogels, for topical use. An effective alternative to conventional therapies is the nanoparticle drug delivery system. We studied lipidic nanoparticles with IQ (Lipo IQ) and functionalized them with a DNA aptamer, AT11 (Lipo IQ AT11), to improve the selectivity for cervical cancer cells combined with the efficacy of essential oils. The formulations showed that the physicochemical properties are adequate for vaginal drug delivery and have antimicrobial activity at higher concentrations (with MIC50 starting from 0.625%). The final formulations exhibited cytotoxicity in cancer cells, enhanced by essential oils without affecting healthy cells, resulting in less than 10% cell viability in HeLa cells and over 60% in NHDF cells. Essential oils potentiate Lipo IQ's effectiveness, while AT11 increases the selectivity for cervical cancer cells. As suggested by the results of the permeation assay, the formulations were internalized by the cancer cells. Overall, the obtained results suggested that the synergistic effect of the essential oils and the nanosystem potentiate the cytotoxic effect of Lipo IQ and that Lipo IQ AT11 promotes selectivity towards cancer cells.

Vesicle delivery systems of functional substances for precision nutrition

Vesicular delivery systems are highly ordered assemblies consisting of one or more concentric bilayers formed by the self-assembly of amphiphilic building blocks in the presence of water. In the field of functional food, vesicular delivery systems have been widely explored for effective formulations to deliver functional substances. With the effort of scientific research, certain categories of vesicular delivery systems have successfully been translated from the laboratory to the global market of functional food. This chapter aims to present comprehensively the various vesicular delivery systems, including their design, preparation methods, encapsulation of functional substances, and application in nutritional interventions.

Lipid nanoparticle mediated small interfering RNA delivery as a potential therapy for Alzheimer's disease

Alzheimer's disease (AD) is a neurodegenerative condition that exhibits a gradual decline in cognitive function and is prevalent among a significant number of individuals globally. The use of small interfering RNA (siRNA) molecules in RNA interference (RNAi) presents a promising therapeutic strategy for AD. Lipid nanoparticles (LNPs) have been developed as a delivery vehicle for siRNA, which can selectively suppress target genes, by enhancing cellular uptake and safeguarding siRNA from degradation. Numerous research studies have exhibited the effectiveness of LNP-mediated siRNA delivery in reducing amyloid beta (Aβ) levels and enhancing cognitive function in animal models of AD. The feasibility of employing LNP-mediated siRNA delivery as a therapeutic approach for AD is emphasized by the encouraging outcomes reported in clinical studies for other medical conditions. The use of LNP-mediated siRNA delivery has emerged as a promising strategy to slow down or even reverse the progression of AD by targeting the synthesis of tau phosphorylation and other genes linked to the condition. Improvement of the delivery mechanism and determination of the most suitable siRNA targets are crucial for the efficacious management of AD. This review focuses on the delivery of siRNA through LNPs as a promising therapeutic strategy for AD, based on the available literature.

Determination of the interior pH of lipid nanoparticles using a pH-sensitive fluorescent dye-based DNA probe

Lipid nanoparticles (LNPs) containing ionizable cationic lipids are proven delivery systems for therapeutic nucleic acids, such as small interfering RNA (siRNA). It is important to understand the relationship between the interior pH of LNPs and the pH of the external environment to understand LNP formulation and function. Here, we developed a simple and rapid approach for determining the pH of the LNP core using a pH-sensitive fluorescent dye-based DNA probe. LNP siRNA systems containing pH-responsive DNA probes (LNP-siRNA&DNA) were generated by rapid mixing of lipids in ethanol and pH 4 aqueous buffer containing siRNA and DNA probes. We demonstrated that DNA probes were readily encapsulated in LNP systems and were sequestered into an environment at a high concentration as evidenced by an inter-probe FRET signal. It was shown that the pH of LNP encapsulated probes closely follows the pH increase or decrease of the external environment. This indicates that the clinically approved LNP RNA systems with similar lipid compositions (e.g., Onpattro and Comirnaty) are highly permeable to protons and that the pH of the interior environment closely mirrors the external environment. The pH-dependent response of the probe in LNPs was also confirmed under buffer conditions at various pHs. Furthermore, we showed that the pH-sensitive DNA probe can be incorporated into LNP systems at levels that allow the pH response to be monitored at a single LNP level using convex lens-induced confinement (CLiC) confocal microscopy. Direct visualization of the internal pH of single particles with the fluorescent DNA probe was achieved by CLiC for LNP-siRNA&DNA systems formulated under both high and normal ionic strength conditions.

Flash nanoprecipitation assisted self-assembly of ionizable lipid nanoparticles for nucleic acid delivery

Ionizable lipid nanoparticles (LNPs) have emerged as a powerful tool for the intracellular delivery of nucleic acids. Following the recent success of LNP-based siRNA therapeutics and mRNA vaccines, the use of ionizable lipids for nucleic acid delivery has tremendously increased. Here, we introduce a flash nanoprecipitation (FNP) approach using the confined impingement (CIJ) mixer to stably self-assemble ionizable LNPs. To validate this approach, we employed three clinically relevant LNP formulations containing SM102, ALC0315, and DLin-MC3-DMA as ionizable lipids. FNP-assembled LNPs showed >95% encapsulation efficiency of mRNA and siRNA payloads and particle sizes below 150 nm. SM102 or ALC0315 LNPs demonstrated efficient delivery of mRNA into immune cells in vitro and to lymphoid organs in vivo, whereas Dlin-MC3-DMA LNPs allowed effective intracellular siRNA delivery with great functional ability. The FNP technique could economically produce LNPs in smaller volumes that are highly suitable for the discovery phase.

Development and characterization of liposomal formulations containing sesquiterpene lactones for the treatment of chronic gout

Gout and hyperuricemia are characterized by high uric acid levels, and their treatment involves medications that have adverse effects. In this study, we evaluated oral liposomal formulations with eremantholide C and goyazensolide as a novel approach to reduce the toxicity associated with these substances while maintaining their anti-hyperuricemic activity. We characterized the formulations and evaluated them based on encapsulation efficiency and stability over 12 months and under simulated physiological environments. We determined the toxicity of the liposomal formulations in Caco-2 cells and the anti-hyperuricemic activity in rats. The formulations exhibited nanometric size, a narrow size distribution, and a negative zeta potential, indicating their stability and uniformity. The efficient encapsulation of the sesquiterpene lactones within the liposomes emphasizes their potential for sustained release and therapeutic efficacy. Stability evaluation revealed a small decrease in the eremantholide C concentration and a remarkable stability in the goyazensolide concentration. In Caco-2 cells, the liposomes did not exert toxicity, but did exhibit an antiproliferative effect. In vivo assays demonstrated that the liposomes reduced serum uric acid levels. Our study represents an advancement in gout and hyperuricemia treatment. The liposomal formulations effectively reduced the toxicity associated with the sesquiterpene lactones while maintaining their therapeutic effects.

An Efficient Method for the Production of High-Purity Bioinspired Large Unilamellar Vesicles

In order to recapitulate complex eukaryotic compartmentalization, synthetic biology aims to recreate cellular membrane-lined compartments from the bottom-up. Many important cellular organelles and cell-produced extracellular vesicles are in the size range of several hundreds of nanometers. Although attaining a fundamental characterization and mimicry of their cellular functions is a compelling goal, the lack of methods for controlled vesicle formation in this size range has hindered full understanding. Here, we show the optimization of a simple and efficient protocol for the production of large unilamellar vesicles (LUVs) with a median diameter in the range of 450-550 nm with high purity. Importantly, we rely on commercial reagents and common laboratory equipment. We thoroughly characterize the influence of different experimental parameters on the concentration and size of the resulting vesicles and assess changes in their lipid composition and surface charge. We provide guidance for researchers to optimize LUV production further to suit specific applications.

Polysaccharide mediated nanodrug delivery: A review

Polysaccharides have drawn a lot of attention due to their potential as carriers for drugs and other bioactive chemicals. In drug delivery systems, natural macromolecules such as polysaccharides are widely utilized as polymers. This utilization extends to various polysaccharides employed in the development of nanoparticles for medicinal administration, with the goal of enhancing therapeutic efficacy while minimizing side effects. This study not only offers an overview of the existing challenges faced by these materials but also provides detailed information on key polysaccharides expertly engineered into nanoparticles. Noteworthy examples include Bael Fruit Gum, Guar Gum, Pectin, Agar, Cellulose, Alginate, Chitin, and Gum Acacia, each selected for their distinctive properties and strategically integrated into nanoparticles. The exploration of these natural macromolecules illuminates their diverse applications and underscores their potential as effective carriers in drug delivery systems. By delving into the unique attributes of each polysaccharide, this review aims to contribute valuable insights to the ongoing advancements in nanomedicine and pharmaceutical technologies. The overarching objective of this review research is to assess the utilization and comprehension of polysaccharides in nanoapplications, further striving to promote their continued integration in contemporary therapeutics and industrial practices.

Developing a rapid analytical method for simultaneous determination of apigenin and gallic acid: validation and application in a nanoliposomal formulation

OBJECTIVE

Apigenin and gallic acid are natural compounds that are useful as antioxidant, anti-inflammatory and anticancer agents, especially when used together in combination. Therefore, the development and validation of a simultaneous method of analysis for both compounds in pure form and when encapsulated in an advanced delivery system such as liposomes would be useful.

METHODS

Analysis was performed using C18 column under isocratic conditions. The mobile phase was acetonitrile: water containing 0.2% orthophosphoric acid at a ratio of 67:33, flow rate 1 ml/min, and detection wavelength 334 nm for apigenin and 271 nm for gallic acid.

RESULTS

The assay method was linear at the concentration range (5-600 µg/mL) with R2 of 1 for both drugs. The method was also shown to be precise and robust with RSD less than 2% with LOD (0.12, 0.1 µg/mL) and LOQ (4.14, 3.58 µg/mL) for apigenin and gallic acid respectively. The method was also applicable for the determination of the entrapment efficiency of both drugs when co-loaded in a nanoliposomal formulation.

CONCLUSION

The described HPLC method was shown to be suitable, sensitive, and reproducible for the simultaneous identification and quantification of apigenin and gallic acid. The analytical results were accurate and precise, with good recovery, low limit of detection, and the chromatographic assay was accomplished in less than 3 min, suggesting the suitability of the method for routine analysis of both drugs in pharmaceutical formulations.

Microfluidic synthesis of lipid-based nanoparticles for drug delivery: recent advances and opportunities

Microfluidic technologies are revolutionizing the synthesis of nanoscale lipid particles and enabling new opportunities for the production of lipid-based nanomedicines. By harnessing the benefits of microfluidics for controlling diffusive and advective transport within microfabricated flow cells, microfluidic platforms enable unique capabilities for lipid nanoparticle synthesis with precise and tunable control over nanoparticle properties. Here we present an assessment of the current state of microfluidic technologies for lipid-based nanoparticle and nanomedicine production. Microfluidic techniques are discussed in the context of conventional production methods, with an emphasis on the capabilities of microfluidic systems for controlling nanoparticle size and size distribution. Challenges and opportunities associated with the scaling of manufacturing throughput are discussed, together with an overview of emerging microfluidic methods for lipid nanomedicine post-processing. The impact of additive manufacturing on current and future microfluidic platforms is also considered.

A comprehensive review on alpha-lipoic acid delivery by nanoparticles

Alpha-lipoic acid (ALA) has garnered significant attention for its potential therapeutic benefits across a wide spectrum of health conditions. Despite its remarkable antioxidant properties, ALA is hindered by challenges such as low bioavailability, short half-life, and unpleasant odor. To overcome these limitations and enhance ALA's therapeutic efficacy, various nanoparticulate drug delivery systems have been explored. This comprehensive review evaluates the application of different nanoparticulate carriers, including lipid-based nanoparticles (solid lipid nanoparticles, niosomes, liposomes, nanostructured lipid carriers (NLCs), and micelles), nanoemulsions, polymeric nanoparticles (nanocapsules, PEGylated nanoparticles, and polycaprolactone nanoparticles), films, nanofibers, and gold nanoparticles, for ALA delivery. Each nanoparticulate system offers unique advantages, such as improved stability, sustained release, enhanced bioavailability, and targeted delivery. For example, ALA-loaded SLNs demonstrated benefits for skin care products and skin rejuvenation. ALA encapsulated in niosomes showed potential for treating cerebral ischemia, a condition largely linked to stroke. ALA-loaded cationic nanoemulsions showed promise for ophthalmic applications, reducing vascular injuries, and corneal disorders. Coating liposomes with chitosan further enhanced stability and performance, promoting drug absorption through the skin. This review provides a comprehensive overview of the advancements in nanoparticulate delivery systems for ALA, highlighting their potential to overcome the limitations of ALA administration and significantly enhance its therapeutic effectiveness. These innovative approaches hold promise for the development of improved ALA-based treatments across a broad spectrum of health conditions.

A novel strategy for partial purification of alkane hydroxylase from P. chrysogenum SNP5 through reconstituting its native membrane into liposome

Integral proteins or enzymes are still challenging to purify into their native state because of their need for an amphipathic environment and cofactors. Alkane hydroxylase (AlkB) is a membrane-bound enzyme that catalyzes the hydroxylation of a range of alkanes that have a broad spectrum of applications. In the current study, a novel approach has been explored for partial purification of alkane hydroxylase (AlkB) in its native state through restructuring the lipid bilayer of Penicillium chrysogenum SNP5 into a liposome to extend the native and protective environment to AlkB enzyme. Three different methods i.e., reverse-phase evaporation method (RPEM), detergent-based method (DBM), and ethanol injection method (EIM) have been used for reconstituting its native membrane into liposome. On characterizing liposomes through fluorescence imaging, AFM, and particle size analysis, the reverse-phase evaporation method gave the best results based on the size distribution (i.e., 100-300 nm), the morphology of liposomes, and maximum AlkB specific activity (i.e., 140.68 U/mg). The maximum reconstitution efficiency of 29.48% was observed in RPEM followed by 17.3% in DBM and 12.3% in EIM. On the characterization of the purified AlkB, the molecular weight was measured of 44.6 KDa and the thermostability of liposomes synthesized with the RPEM method was obtained maximum at 55 °C. This approach may open a new strategy for the purification of integral enzymes/proteins in their native state in the field of protein purification and its applications in diversified industries.

Novel Discoveries and Clinical Advancements for Treating Onychomycosis: A Mechanistic Insight

Onychomycosis continues to be the most challenging disease condition for pharmaceutical scientists to develop an effective drug delivery system. Treatment challenges lie in incomplete cure and high relapse rate. Present compilation provides cumulative information on pathophysiology, diagnostic techniques, and conventional treatment strategies to manage onychomycosis. Novel technologies developed for successful delivery of antifungal molecules are also discussed in brief. Multidirectional information offered by this article also unlocks the panoramic view of leading patented technologies and clinical trials. The obtained clinical landscape recommends the use of advanced technology driven approaches, as a promising way-out for treatment of onychomycosis. Collectively, present review warrants the application of novel technologies for the successful management of onychomycosis. This review will assist readers to envision a better understanding about the technologies available for combating onychomycosis. We also trust that these contributions address and certainly will encourage the design and development of nanocarriers-based delivery vehicles for effective management of onychomycosis.

CLDN6-specific CAR-T cells plus amplifying RNA vaccine in relapsed or refractory solid tumors: the phase 1 BNT211-01 trial

The oncofetal antigen Claudin 6 (CLDN6) is highly and specifically expressed in many solid tumors, and could be a promising treatment target. We report dose escalation results from the ongoing phase 1/2 BNT211-01 trial evaluating the safety and feasibility of chimeric antigen receptor (CAR) T cells targeting the CLDN6 with or without a CAR-T cell-amplifying RNA vaccine (CARVac) at two dose levels (DLs) in relapsed/refractory CLDN6-positive solid tumors. The primary endpoints were safety and tolerability, maximum tolerated dose and recommended phase 2 dose (RP2D). Secondary endpoints included objective response rate (ORR) and disease control rate. We observed manageable toxicity, with 10 out of 22 patients (46%) experiencing cytokine release syndrome including one grade 3 event and 1 out of 22 (5%) with grade 1 immune effector cell-associated neurotoxicity syndrome. Dose-limiting toxicities occurred in two patients at the higher DL, resolving without sequelae. CAR-T cell engraftment was robust, and the addition of CARVac was well tolerated. The unconfirmed ORR in 21 evaluable patients was 33% (7 of 21), including one complete response. The disease control rate was 67% (14 of 21), with stable disease in seven patients. Patients with germ cell tumors treated at the higher DL exhibited the highest response rate (ORR 57% (4 of 7)). The maximum tolerated dose and RP2D were not established as the trial has been amended to utilize an automated manufacturing process. A repeat of the dose escalation is ongoing and will identify a RP2D for pivotal trials. ClinicalTrials.gov Identifier: NCT04503278 .

Preparation of Nanosized Pharmaceutical Formulations by Dual Centrifugation

Dual centrifugation (DC) is an innovative in-vial homogenization and in-vial nanomilling technique that has been in use for the preparation of liposomes for more than one decade. Since then, DC has continuously been developed for preparing various liposomes and other lipid nanoparticles including emulsions and solid lipid nanoparticles (SLNs) as well as polymersomes and nanocrystals. Improvements in equipment technology have been achieved over the past decade, so that DC is now on its way to becoming the quasi-standard for the simple, fast, and aseptic production of lipid nanoparticles and nanocrystals in small and medium batch sizes, including the possibility of simple and fast formulation screening or bedside preparations of therapeutic nanoparticles. More than 68 publications in which DC was used to produce nanoparticles have appeared since then, justifying an initial review of the use of DC for pharmaceutical nanotechnology.

Multicompartment colloid systems with lipid and polymer membranes for biomedical applications

Multicompartment structures have the potential for biomedical applications because they can act as multifunctional systems and provide simultaneous delivery of drugs and diagnostics agents of different types. Moreover, some of them mimic biological cells to some extent with organelles as separate sub-compartments. This article analyses multicompartment colloidal structures with smaller sub-units covered with lipid or polymer membranes that provide additional protection for the encapsulated substances. Vesosomes with small vesicles encapsulated in the inner pools of larger liposomes are the most studied systems to date. Dendrimer molecules are enclosed by a lipid bilayer shell in dendrosomes. Capsosomes, polymersomes-in-polymer capsules, and cubosomes-in-polymer capsules are composed of sub-compartments encapsulated within closed multilayer polymer membranes. Janus or Cerberus emulsions contain droplets composed of two or three phases: immiscible oils in O/W emulsions and aqueous polymer or salt solutions that are separated into two or three phases and form connected droplets in W/O emulsions. In more cases, the external surface of engulfed droplets in Janus or Cerberus emulsions is covered with a lipid or polymer monolayer. eLiposomes with emulsion droplets encapsulated into a bilayer shell have been given little attention so far, but they have very great prospects. In addition to nanoemulsion droplets, solid lipid nanoparticles, nanostructured lipid carriers and inorganic nanoparticles can be loaded into eLiposomes. Molecular engineering of the external membrane allows the creation of ligand-targeted and stimuli-responsive multifunctional systems. As a result, the efficacy of drug delivery can be significantly enhanced.

Recent Progress of Preparation Strategies in Organic Nanoparticles for Cancer Phototherapeutics

Phototherapy has the advantages of being a highly targeted, less toxic, less invasive, and repeatable treatment, compared with conventional treatment methods such as surgery, chemotherapy, and radiotherapy. The preparation strategies are significant in order to determine the physical and chemical properties of nanoparticles. However, choosing appropriate preparation strategies to meet applications is still challenging. This review summarizes the recent progress of preparation strategies in organic nanoparticles, mainly focusing on the principles, methods, and advantages of nanopreparation strategies. In addition, typical examples of cancer phototherapeutics are introduced in detail to inform the choice of appropriate preparation strategies. The relative future trend and outlook are preliminarily proposed.

Recent advances and prospects for lipid-based nanoparticles as drug carriers in the treatment of human retinal diseases

The delivery of cures for retinal diseases remains problematic. There are four main challenges: passing through multiple barriers of the eye, the delivery to particular retinal cell types, the capability to carry different forms of therapeutic cargo and long-term therapeutic efficacy. Lipid-based nanoparticles (LBNPs) are potent to overcome these challenges due to their unique merits: amphiphilic nanoarchitectures to pass biological barriers, vary modifications with specific affinity to target cell types, flexible capacity for large and mixed types of cargos and slow-release formulations for long-term treatment. We have reviewed the latest research on the applications of LBNPs for treating retinal diseases and categorized them by different payloads. Furthermore, we identified technical barriers and discussed possible future development for LBNPs to expand the therapeutic potential in treating retinal diseases.

Multifunctional targetable liposomal drug delivery system in the management of leukemia: Potential, opportunities, and emerging strategies

The concern impeding the success of chemotherapy in leukemia treatment is descending efficacy of drugs because of multiple drug resistance (MDR). The previous failure of traditional treatment methods is primarily responsible for the present era of innovative agents to treat leukemia effectively. The treatment option is a chemotherapeutic agent in most available treatment strategies, which unfortunately leads to high unavoidable toxicities. As a result of the recent surge in marketed products, theranostic nanoparticles, i.e., multifunctional targetable liposomes (MFTL), have been approved for improved and more successful leukemia treatment that blends therapeutic and diagnostic characteristics. Since they broadly offer the required characteristics to get past the traditional/previous limitations, such as the absence of site-specific anti-cancer therapeutic delivery and ongoing real-time surveillance of the leukemia target sites while administering therapeutic activities. To prepare MFTL, suitable targeting ligands or tumor-specific antibodies are required to attach to the surface of the liposomes. This review exhaustively covered and summarized the liposomal-based formulation in leukemia treatment, emphasizing leukemia types; regulatory considerations, patents, and clinical portfolios to overcome clinical translation hurdles have all been explored.

Current Applications of Liposomes for the Delivery of Vitamins: A Systematic Review

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and is increasing significantly in the last ten years. Although in different stages of technological maturity-in the case of cosmetics, many products are on the market-processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially those aiming at scaling up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase in drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug-loaded biocompatible nanocarriers for cosmetics and food applications.

A New Productive Approach and Formulative Optimization for Curcumin Nanoliposomal Delivery Systems

The use of natural resources and the enhancing of technologies are outlining the strategies of modern scientific-technological research for sustainable health products manufacturing. In this context, the novel simil-microfluidic technology, a mild production methodology, is exploited to produce liposomal curcumin as potential powerful dosage system for cancer therapies and for nutraceutical purposes. Through simil-microfluidic technology, based on interdiffusion phenomena of a lipid-ethanol phase in an aqueous flow, massive productions of liposomes at nanometric scale can be obtained. In this work, studies on liposomal production with useful curcumin loads were performed. In particular, process issues (curcumin aggregations) were elucidated and formulation optimization for curcumin load was performed. The main achieved result has been the definition of operative conditions for nanoliposomal curcumin production with interesting loads and encapsulation efficiencies.

Brain gene therapy with Trojan horse lipid nanoparticles

The COVID-19 mRNA vaccine was developed by the scalable manufacture of lipid nanoparticles (LNPs) that encapsulate mRNA within the lipid. There are many potential applications for this large nucleic acid delivery technology, including the delivery of plasmid DNA for gene therapy. However, gene therapy for the brain requires LNP delivery across the blood-brain barrier (BBB). It is proposed that LNPs could be reformulated for brain delivery by conjugation of receptor-specific monoclonal antibodies (MAbs) to the LNP surface. The MAb acts as a molecular Trojan horse to trigger receptor-mediated transcytosis (RMT) of the LNP across the BBB and subsequent localization to the nucleus for transcription of the therapeutic gene. Trojan horse LNPs could enable new approaches to gene therapy of the brain.

Morphological Behavior of Liposomes and Lipid Nanoparticles

Liposomes, which consist of bilayer lipids surrounding interior aqueous compartment(s), were first characterized nearly 60 years ago. Remarkably, many fundamental properties of liposomes and their micellar-like "solid core" counterparts (a lipid monolayer surrounding a hydrophobic core) and transitions between these structures remain poorly understood. In this work, we examine the effects of basic variables on the morphology adopted by lipid-based systems produced by rapid mixing of lipids in ethanol with aqueous media. We show that, for lipids such as distearolyphosphatidylcholine (DSPC)-cholesterol mixtures that form bilayer vesicles on hydration, osmotic stress can induce regions of high positive membrane curvature, leading to fusion between unilamellar vesicles to produce bilamellar vesicles. Addition of lyso PC, an "inverted cone"-shaped lipid that supports regions of high positive curvature, can inhibit the formation of these bilamellar vesicles by stabilizing a hemifused intermediate structure. Conversely, the presence of "cone"-shaped lipids such as dioleoylphosphatidylethanolamine (DOPE) that results in negative membrane curvature promotes fusion events subsequent to vesicle formation (during the ethanol dialysis stage), leading to bilamellar and multilamellar systems even in the absence of osmotic stress. Alternatively, the presence of increasing amounts of triolein, a lipid that is insoluble in lipid bilayers, results in increasing internal solid core structures until micellar-like systems with a hydrophobic core of triolein are achieved. These results are interpreted in terms of the intrinsic membrane curvature that bilayer vesicles can stably maintain as well as the ability of bilayer lipids to first form a monolayer around a solid core of hydrophobic material such as triolein and then, as the proportion of bilayer lipids is increased, progressively form bilayer structures that can eventually form a complete bilayer encapsulating both a hydrophobic core and an aqueous compartment. These hybrid intermediate structures may have utility as novel drug delivery systems.

Lipid-based nucleic acid therapeutics with in vivo efficacy

Synthetic vectors for therapeutic nucleic acid delivery are currently competing significantly with their viral counter parts due to their reduced immunogenicity, large payload capacity, and ease of manufacture under GMP-compliant norms. The approval of Onpattro, a lipid-based siRNA therapeutic, and the proven clinical success of two lipid-based COVID-19 vaccines from Pfizer-BioNTech, and Moderna heralded the specific advantages of lipid-based systems among all other synthetic nucleic acid carriers. Lipid-based systems with diverse payloads-plasmid DNA (pDNA), antisense oligonucleotide (ASO), small interfering RNA (siRNA), microRNA (miRNA), small activating RNA (saRNA), and messenger RNA (mRNA)-are now becoming a mature technology, with growing impact in the clinic. Research over four decades identified the key factors determining the therapeutic success of these multi-component systems. Here, we discuss the main nucleic acid-based technologies, presenting their mechanism of action, delivery barriers facing them, the structural properties of the payload as well as the component lipids that regulate physicochemical properties, pharmacokinetics and biodistribution, efficacy, and toxicity of the resultant nanoparticles. We further detail on the formulation parameters, evolution of the manufacturing techniques that generate reproducible and scalable outputs, and key manufacturing aspects that enable control over physicochemical properties of the resultant particles. Preclinical applications of some of these formulations that were successfully translated from in vitro studies to animal models are subsequently discussed. Finally, clinical success and failure of these systems starting from 1993 to present are highlighted, in a holistic literature review focused on lipid-based nucleic acid delivery systems. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials.

Ethanol Injection Method for Liposome Preparation

Ethanol injection method is one of the preferred methods for liposome preparation due to its advantages including rapidity, safety, and reproducibility. This method involves the injection of phospholipid solution of ethanol into a stirred aqueous solution. Due to the diffusion of ethanol in aqueous solution, the dissolved phospholipids precipitate to form bilayer phospholipid fragments, which further fuse to form closed liposomal structures. After evaporation of ethanol, the liposomes can be finally obtained. In this chapter, we will describe the details of ethanol injection method for preparing liposomes and discuss issues that need to be considered during the fabrication process.

Sonication-Based Basic Protocol for Liposome Synthesis

Liposomes are spherical vesicles with a wide range of sizes from nano- to micrometer scale. For the past 7-8 decades, these vesicles have gained the interest of many scientists due to their physical, chemical, and mathematical properties and for their immense utility and potential as delivery vehicles for toxic and non-toxic excipients into biological tissues. Methods related to the selection of reagents for the creation of specific liposomes of certain properties are beyond the scope of this chapter, but here, I would outline a simplistic protocol to prepare and qualify a uniform batch of simple liposomes with basic cargo. This chapter will attempt to provide the reader with a starting point for this immensely potent tool.

A tale of nucleic acid-ionizable lipid nanoparticles: Design and manufacturing technology and advancement

INTRODUCTION

Ionizable lipid nanoparticles (LNPs) have been proven to have high encapsulation, cellular uptake, and effective endosomal escape and are therefore promising for nucleic acid delivery. The combination of ionizable lipids, helper lipids, cholesterol, and PEG lipids advances nucleic acid-ionizable LNPs and distinguishes them from liposomes, SLNs, NLCs, and other lipid particles. Solvent injection and microfluidics technology are the primary manufacturing techniques for commercialized ionizable LNPs. Microfluidics technology limitations restrict the rapid industrial scale-up and therapeutic effectiveness of ionized LNPs. Alternative manufacturing technologies and target-specific lipids are urgently needed.

AREA COVERED

This article provides an in-depth update on the lipid compositions, clinical trials, and manufacturing technologies for nucleic acid-ionizable LNPs. For the first time, we updated the distinction between ionizable LNPs and other lipid particles. We also proposed an alternate thermocycling technology for high industrial scale-up and the stability of nucleic acid-ionizing LNPs.

EXPERT OPINION

Nucleic acid-ionizable LNPs have a promising future for delivering nucleic acids in a target-specific manner. Though ionizing LNPs are in their early stages, they face several challenges, including only hepatic delivery, a short shelf life, and ultra-cold storage. In our opinion, ligand-based, target-specific synthesized novel lipids and advanced manufacturing technologies can easily overcome the restrictions and open up a new approach for improved therapeutic efficacy for chronic disorders.

A comprehensive review on invasomal carriers incorporating natural terpenes for augmented transdermal delivery

Background

Transdermal drug delivery is one of the most widely used drug administration routes, which offer several advantages over other routes of drug delivery. The apical layer of the skin called the stratum corneum is the most dominant obstacle in the transdermal drug delivery, which restricts the passage of drugs across the skin. Considerable strategies have been applied to enhance the rate of permeation across the epithelial cells; however, the most widely used strategy is the use of sorption boosters, also known as permeation enhancers.

Main body

Terpenes were considered as efficient skin permeation enhancers and are generally recognized as safe as per Food and Drug Administration. Terpenes improve the permeability of drugs either by destructing the stratum corneum’s tightly packed lipid framework, excessive diffusivity of drug in cell membrane or by rampant drug partitioning into epithelial cells. Various vesicular systems have been developed and utilized for the transdermal delivery of many drugs. Invasomes are one such novel vesicular system developed which are composed of phospholipids, ethanol and terpenes. The combined presence of ethanol and terpenes provides exceptional flexibility to the vesicles and improves the permeation across the barrier offered due to the stratum corneum as both ethanol and terpenes act as permeation enhancers. Therefore, utilization of invasomes as carriers to facilitate higher rate of drug permeation through the skin can be a very useful approach to improve transdermal drug delivery of a drug.

Conclusion

The paper focuses on a broad updated view of terpenes as effective permeation enhancers and invasomes along with their applications in the pharmaceutical formulations.

States of Aggregation and Phase Transformation Behavior of Metallosurfactant Complexes by Hexacyanoferrate(II): Thermodynamic and Kinetic Investigation of ETR in Ionic Liquids and Liposome Vesicles

Electronic absorption spectroscopy was used to study the ETR of surfactant-cobalt(III) complexes containing imidazo[4,5-f][1,10]phenanthroline, dipyrido[3,2-d:2'-3'-f]quinoxaline and dipyrido[3,2-a:2',4'-c](6,7,8,9-tetrahydro)phenazine ligands by using ferrocyanide ions in unilamellar vesicles of dipalmitoylphosphotidylcholine (DPPC) and 1-butyl-3-methylimidazolium bromide ((BMIM)Br), at different temperatures under pseudo-first-order conditions using an excess of the reductant. The reactions were found to be second-order and the electron transfer is postulated as occurring in the outer sphere. The rate constant for the electron transfer reactions was found to increase with increasing concentrations of ionic liquids. Besides these, the effects of surfactant complex ions on liposome vesicles in these same reactions have also been studied on the basis of hydrophobicity. We observed that, below the phase transition temperature, there is an increasing amount of surfactant-cobalt(III) complexes expelled from the interior of the vesicle membrane through hydrophobic effects, while above the phase transition temperature, the surfactant-cobalt(III) complexes are expelled from the interior to the exterior surface of the vesicle. Kinetic data and activation parameters are interpreted in respect of an outer-sphere electron transfer mechanism. By assuming the existence of an outer-sphere mechanism, the results have been clarified based on the presence of hydrophobicity, and the size of the ligand increases from an ip to dpqc ligand and the reactants become oppositely charged. In all these media, the ΔS^# values are recognized as negative in their direction in all the concentrations of complexes employed, indicative of a more ordered structure of the transition state. This is compatible with a model in which these complexes and [Fe(CN)₆]^4- ions bind to the DPPC in the transition state. Thus, the results have been interpreted based on the self-aggregation, hydrophobicity, charge densities of the co-ligand and the reactants with opposite charges.

Microfluidic vortex focusing for high throughput synthesis of size-tunable liposomes

Control over vesicle size during nanoscale liposome synthesis is critical for defining the pharmaceutical properties of liposomal nanomedicines. Microfluidic technologies capable of size-tunable liposome generation have been widely explored, but scaling these microfluidic platforms for high production throughput without sacrificing size control has proven challenging. Here we describe a microfluidic-enabled process in which highly vortical flow is established around an axisymmetric stream of solvated lipids, simultaneously focusing the lipids while inducing rapid convective and diffusive mixing through application of the vortical flow field. By adjusting the individual buffer and lipid flow rates within the system, the microfluidic vortex focusing technique is capable of generating liposomes with precisely controlled size and low size variance, and may be operated up to the laminar flow limit for high throughput vesicle production. The reliable formation of liposomes as small as 27 nm and mass production rates over 20 g/h is demonstrated, offering a path toward production-scale liposome synthesis using a single continuous-flow vortex focusing device.

Sodium Thiosulphate-Loaded Liposomes Control Hydrogen Sulphide Release and Retain Its Biological Properties in Hypoxia-like Environment

Hypoxia, or insufficient oxygen availability is a common feature in the development of a myriad of cardiovascular-related conditions including ischemic disease. Hydrogen sulphide (H2S) donors, such as sodium thiosulphate (STS), are known for their cardioprotective properties. However, H2S due to its gaseous nature, is released and cleared rapidly, limiting its potential translation to clinical settings. For the first time, we developed and characterised liposome formulations encapsulating STS and explored their potential for modulating STS uptake, H2S release and the ability to retain pro-angiogenic and biological signals in a hypoxia-like environment mirroring oxygen insufficiency in vitro. Liposomes were prepared by varying lipid ratios and characterised for size, polydispersity and charge. STS liposomal encapsulation was confirmed by HPLC-UV detection and STS uptake and H2S release was assessed in vitro. To mimic hypoxia, cobalt chloride (CoCl2) was administered in conjunction with formulated and non-formulated STS, to explore pro-angiogenic and metabolic signals. Optimised liposomal formulation observed a liposome diameter of 146.42 ± 7.34 nm, a polydispersity of 0.22 ± 0.19, and charge of 3.02 ± 1.44 mV, resulting in 25% STS encapsulation. Maximum STS uptake (76.96 ± 3.08%) from liposome encapsulated STS was determined at 24 h. Co-exposure with CoCl2 and liposome encapsulated STS resulted in increased vascular endothelial growth factor mRNA as well as protein expression, enhanced wound closure and increased capillary-like formation. Finally, liposomal STS reversed metabolic switch induced by hypoxia by enhancing mitochondrial bioenergetics. These novel findings provide evidence of a feasible controlled-delivery system for STS, thus H2S, using liposome-based nanoparticles. Likewise, data suggests that in scenarios of hypoxia, liposomal STS is a good therapeutic candidate to sustain pro-angiogenic signals and retain metabolic functions that might be impaired by limited oxygen and nutrient availability.

Microfluidic Manufacture of Lipid-Based Nanomedicines

Nanoparticulate technologies have revolutionized drug delivery allowing for passive and active targeting, altered biodistribution, controlled drug release (temporospatial or triggered), enhanced stability, improved solubilization capacity, and a reduction in dose and adverse effects. However, their manufacture remains immature, and challenges exist on an industrial scale due to high batch-to-batch variability hindering their clinical translation. Lipid-based nanomedicines remain the most widely approved nanomedicines, and their current manufacturing methods remain discontinuous and face several problems such as high batch-to-batch variability affecting the critical quality attributes (CQAs) of the product, laborious multistep processes, need for an expert workforce, and not being easily amenable to industrial scale-up involving typically a complex process control. Several techniques have emerged in recent years for nanomedicine manufacture, but a paradigm shift occurred when microfluidic strategies able to mix fluids in channels with dimensions of tens of micrometers and small volumes of liquid reagents in a highly controlled manner to form nanoparticles with tunable and reproducible structure were employed. In this review, we summarize the recent advancements in the manufacturing of lipid-based nanomedicines using microfluidics with particular emphasis on the parameters that govern the control of CQAs of final nanomedicines. The impact of microfluidic environments on formation dynamics of nanomaterials, and the application of microdevices as platforms for nanomaterial screening are also discussed.

Current Advances in Specialised Niosomal Drug Delivery: Manufacture, Characterization and Drug Delivery Applications

Development of nanomaterials for drug delivery has received considerable attention due to their potential for achieving on-target delivery to the diseased area while the surrounding healthy tissue is spared. Safe and efficiently delivered payloads have always been a challenge in pharmaceutics. Niosomes are self-assembled vesicular nanocarriers formed by hydration of a non-ionic surfactant, cholesterol or other molecules that combine to form a versatile drug delivery system with a variety of applications ranging from topical delivery to targeted delivery. Niosomes have advantages similar to those of liposomes with regards to their ability to incorporate both hydrophilic and hydrophobic payloads. Moreover, niosomes have simple manufacturing methods, low production cost and exhibit extended stability, consequently overcoming the major drawbacks associated with liposomes. This review provides a comprehensive summary of niosomal research to date, including the types of niosomes and critical material attributes (CMA) and critical process parameters (CPP) of niosomes and their effects on the critical quality attributes (CQA) of the technology. Furthermore, physical characterisation techniques of niosomes are provided. The review then highlights recent applications of specialised niosomes in drug delivery. Finally, limitations and prospects for this technology are discussed.

Recent advances in superlubricity of liposomes for biomedical applications

Achieving superlubricity, a state of lubrication where friction nearly vanishes, has become one of the most promising approaches to combat friction-induced energy dissipation and medical device failure. Phospholipids are amphiphilic molecules comprising highly hydrophilic phosphatidylcholine head groups as well as hydrophobic hydrocarbon chains, When solubilized, phospholipids can readily self-assemble to form different structures such as bilayers and vesicles (liposomes). Recently, liposomes have been identified as excellent lubricants, especially in the boundary lubrication regime the most common lubrication status in the field of biotribology. In this review, we summarize recent progress in employing liposomes as key players for employing superlubricity in biomedical applications. The relationship between lipids and liposomes, manufacturing approaches, lubrication regimes, and regulation mechanisms of liposomes are discussed. Finally, we indicate possible future directions for the use of liposome-mediated superlubricity in biomedical applications.

Cancer immune therapy using engineered ‛tail-flipping' nanoliposomes targeting alternatively activated macrophages

Alternatively-activated, M2-like tumor-associated macrophages (TAM) strongly contribute to tumor growth, invasiveness and metastasis. Technologies to disable the pro-tumorigenic function of these TAMs are of high interest to immunotherapy research. Here we show that by designing engineered nanoliposomes bio-mimicking peroxidated phospholipids that are recognised and internalised by scavenger receptors, TAMs can be targeted. Incorporation of phospholipids possessing a terminal carboxylate group at the sn-2 position into nanoliposome bilayers drives their uptake by M2 macrophages with high specificity. Molecular dynamics simulation of the lipid bilayer predicts flipping of the sn-2 tail towards the aqueous phase, while molecular docking data indicates interaction of the tail with Scavenger Receptor Class B type 1 (SR-B1). In vivo, the engineered nanoliposomes are distributed specifically to M2-like macrophages and, upon delivery of the STAT6 inhibitor (AS1517499), zoledronic acid or muramyl tripeptide, these cells promote reduction of the premetastatic niche and/or tumor growth. Altogether, we demonstrate the efficiency and versatility of our engineered “tail-flipping” nanoliposomes in a pre-clinical model, which paves the way to their development as cancer immunotherapeutics in humans.

Tumor-associated macrophages are mostly pro-tumorigenic, due to their re-programming by the tumor microenvironment. Here authors show that nanoliposomes, incorporating phospholipids with a flipping-tail chain, are engulfed specifically by intratumoral, alternatively activated macrophages, while delivering a cargo that converts these cells into anti-tumor macrophages.

Venturi-based rapid expansion of supercritical solution (Vent-RESS): synthesis of liposomes for pH-triggered delivery of hydrophilic and lipophilic bioactives

Multivitamin-loaded and surface-modified liposomes tailored for simultaneous intestinal delivery of both lipophilic and hydrophilic bioactives were synthesized from sunflower phosphatidylcholine (SFPC). Liposomes (SL) were generated with the aid of a novel, organic solvent free, and environmentally benign process which utilizes venturi-based rapid expansion of supercritical solution (Vent-RESS). Vitamins E and C were used as model lipophilic and hydrophilic bioactives and demonstrated an average encapsulation efficiency of 92 and 70 %, respectively. Synthesized liposomes were coated with a pH-responsive double-wall of chitosan and β-lactoglobulin (βlg-Cs-SL) to develop a biocompatible vehicle for pH-triggered delivery of bioactive cargo(s). To compare the efficacy of this newly developed dual-coating, SL was also coated with a commercially available pH responsive polymer, Eudragit® S100 (Eu-SL). No organic solvent was used during the surface coating of SLs with these two different types of enteric coatings. The performance of these two coatings was studied by conducting morphological characterization through diameter and ζ-potential measurements along with confocal laser scanning and freeze-fracture cryogenic scanning electron microscopies. The stability of coated and uncoated SFPC liposomes was determined in simulated gastrointestinal fluids. For βlg-Cs-SL and Eu-SL, after 2 h of incubation in simulated gastric condition, less than 5 % of the encapsulated vitamins C and E were released, whereas for SL, 41 and 28 % of vitamins C and E were released within 2 h of incubation period. In simulated intestinal fluid, coated liposomes released most of their remaining payload when incubated for 4 h. The newly developed dual coating was found to be as effective as its commercially available counterpart, Eudragit® S100 coating; nevertheless, the biocompatible, non-toxic, and non-synthetic nature of this coating makes it an attractive alternative. Modeling the release kinetics of vitamins from coated liposome showed that the release of payload from surface coated liposomes proceeded through a multistep structural disintegration involving both Fickian and non-Fickian types of diffusion. The ability of these surface-coated liposomes to maintain structural integrity under the gastric condition followed by site-specific, pH-triggered release of encapsulated cargo in the intestine will make them highly suitable for oral administration of bioactive compounds in pharmaceutical and food applications.

Interaction of triblock copolymers (Pluronic®) with DMPC vesicles: a photophysical and computational study

Pluronic/lipid mix promises stealth liposomes with long circulation time and long-term stability for pharmaceutical applications. However, the influence of Pluronics on several aspects of lipid membranes has not been fully elucidated. Herein it was described the effect of Pluronics on the structured water, alkyl chain conformation, and kinetic stability of dimyristoylphosphatidylcholine (DMPC) liposomes using interfacial and deeper fluorescent probes along with computational molecular modeling data. Interfacial water changed as a function of Pluronics' hydrophobicity with polypropylene oxide (PPO) anchoring the copolymers in the lipid bilayer. Pluronics with more than 30-40 PO units had facilitated penetration at the bilayer while shorter PPO favored a more interfacial interaction. Low Pluronic concentrations provided long-term stability of vesicles by steric effects of polyethylene oxide (PEO), but high amounts destabilized the vesicles as a sum of water-bridge cleavage at the polar head group and the reduced alkyl-alkyl interactions among the lipids. The high kinetic stability of Pluronic/DMPC vesicles is a proof-of-concept of its advantages and applicability in nanotechnology over conventional liposome-based pharmaceutical products for future biomedical applications.

A Historical Review of Brain Drug Delivery

The history of brain drug delivery is reviewed beginning with the first demonstration, in 1914, that a drug for syphilis, salvarsan, did not enter the brain, due to the presence of a blood-brain barrier (BBB). Owing to restricted transport across the BBB, FDA-approved drugs for the CNS have been generally limited to lipid-soluble small molecules. Drugs that do not cross the BBB can be re-engineered for transport on endogenous BBB carrier-mediated transport and receptor-mediated transport systems, which were identified during the 1970s-1980s. By the 1990s, a multitude of brain drug delivery technologies emerged, including trans-cranial delivery, CSF delivery, BBB disruption, lipid carriers, prodrugs, stem cells, exosomes, nanoparticles, gene therapy, and biologics. The advantages and limitations of each of these brain drug delivery technologies are critically reviewed.