The nucleotide sequence at the origin for assembly on tobacco mosaic virus RNA

3D Puzzle at the Nanoscale-How do RNA Viruses Self-Assemble their Capsids into Perfectly Ordered Structures

The phenomenon of RNA virus self-organization, first observed in the mid-20th century in tobacco mosaic virus, is the subject of extensive research. Efforts to comprehend this process intensify due to its potential for producing vaccines or antiviral compounds as well as nanocarriers and nanotemplates. However, direct observation of the self-assembly is hindered by its prevalence within infected host cells. One of the approaches involves in vitro and in silico research using model viruses featuring a ssRNA(+) genome enclosed within a capsid made up of a single type protein. While various pathways are proposed based on these studies, their relevance in vivo remains uncertain. On the other hand, the development of advanced microscopic methods provide insights into the events within living cells, where following viral infection, specialized compartments form to facilitate the creation of nascent virions. Intriguingly, a growing body of evidence indicates that the primary function of packaging signals in viral RNA is to effectively initiate the virion self-assembly. This is in contrast to earlier opinions suggesting a role in marking RNA for encapsidation. Another noteworthy observation is that many viruses undergo self-assembly within membraneless liquid organelles, which are specifically induced by viral proteins.

The Tobacco Mosaic Virus Origin of Assembly Sequence is Dispensable for Specific Viral RNA Encapsidation but Necessary for Initiating Assembly at a Single Site

We have investigated whether the presence of the origin of assembly sequence (OAS) of tobacco mosaic virus (TMV) is necessary for the specific encapsidation of replicating viral RNA. To this end TMV coat protein was expressed from replicating RNA constructs with or without the OAS in planta. In both cases the replicating RNA was specifically encapsidated to give nucleoprotein nanorods, though the yield in the absence of the OAS was reduced to about 60% of that in its presence. Moreover, the nanorods generated in the absence of the OAS were more heterogeneous in length and contained frequent structural discontinuities. These results strongly suggest that the function of the OAS is to provide a unique site for the initiation of viral assembly, leading to a one-start helix, rather than the selection of virus RNA for packaging.

Advances and insights in the diagnosis of viral infections

Viral infections are the most common among diseases that globally require around 60 percent of medical care. However, in the heat of the pandemic, there was a lack of medical equipment and inpatient facilities to provide all patients with viral infections. The detection of viral infections is possible in three general ways such as (i) direct virus detection, which is performed immediately 1-3 days after the infection, (ii) determination of antibodies against some virus proteins mainly observed during/after virus incubation period, (iii) detection of virus-induced disease when specific tissue changes in the organism. This review surveys some global pandemics from 1889 to 2020, virus types, which induced these pandemics, and symptoms of some viral diseases. Non-analytical methods such as radiology and microscopy also are overviewed. This review overlooks molecular analysis methods such as nucleic acid amplification, antibody-antigen complex determination, CRISPR-Cas system-based viral genome determination methods. Methods widely used in the certificated diagnostic laboratory for SARS-CoV-2, Influenza A, B, C, HIV, and other viruses during a viral pandemic are outlined. A comprehensive overview of molecular analytical methods has shown that the assay's sensitivity, accuracy, and suitability for virus detection depends on the choice of the number of regions in the viral open reading frame (ORF) genome sequence and the validity of the selected analytical method.

Analysis of Engineered Tobacco Mosaic Virus and Potato Virus X Nanoparticles as Carriers for Biocatalysts

Plant virus nanoparticles are promising candidates for the development of novel materials, including nanocomposites and scaffolds/carriers for functional molecules such as enzymes. Their advantages for enzyme immobilization include a modular organization, a robust and programmable structure, and a simple, cost-effective production. However, the activity of many enzymes relies on posttranslational modification and most plant viruses replicate in the cytoplasm, so functional enzymes cannot be displayed on the virus surface by direct coat protein fusions. An alternative display system to present the Trichoderma reesei endoglucanase Cel12A on potato virus X (PVX) using SpyTag/SpyCatcher (ST/SC) technology was recently developed by the authors, which allows the carrier and enzyme to be produced separately before isopeptide conjugation. Although kinetic analysis clearly indicated efficient biocatalyst activity, the PVX carrier interfered with substrate binding. To overcome this, the suitability of tobacco mosaic virus (TMV) was tested, which can also accommodate a larger number of ST peptides. We produced TMV particles displaying ST as a new platform for the immobilization of enzymes such as Cel12A, and compared its performance to the established PVX-ST platform in terms of catalytic efficiency. Although more enzyme molecules were immobilized on the TMV-ST particles, we found that the rigid scaffold and helical spacing significantly affected enzyme activity.

Physical virology: From virus self-assembly to particle mechanics

Viruses are highly ordered supramolecular complexes that have evolved to propagate by hijacking the host cell's machinery. Although viruses are very diverse, spreading through cells of all kingdoms of life, they share common functions and properties. Next to the general interest in virology, fundamental viral mechanisms are of growing importance in other disciplines such as biomedicine and (bio)nanotechnology. However, in order to optimally make use of viruses and virus-like particles, for instance as vehicle for targeted drug delivery or as building blocks in electronics, it is essential to understand their basic chemical and physical properties and characteristics. In this context, the number of studies addressing the mechanisms governing viral properties and processes has recently grown drastically. This review summarizes a specific part of these scientific achievements, particularly addressing physical virology approaches aimed to understand the self-assembly of viruses and the mechanical properties of viral particles. Using a physicochemical perspective, we have focused on fundamental studies providing an overview of the molecular basis governing these key aspects of viral systems. This article is categorized under: Biology-Inspired Nanomaterials > Protein and Virus-Based Structures Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Potyviral coat protein and genomic RNA: A striking partnership leading virion assembly and more

Potyvirus genus clusters a significant and expanding number of widely distributed plant viruses, responsible for large losses impacting most crops of economic interest. The potyviral genome is a single-stranded, linear, positive-sense RNA of around 10kb that is encapsidated in flexuous rod-shaped filaments, mostly made up of a helically arranged coat protein (CP). Beyond its structural role of protecting the viral genome, the potyviral CP is a multitasking protein intervening in practically all steps of the virus life cycle. In particular, interactions between the CP and the viral RNA must be tightly controlled to allow the correct assignment of the RNA to each of its functions through the infection process. This review attempts to bring together the most relevant available information regarding the architecture and modus operandi of potyviral CP and virus particles, highlighting significant discoveries, but also substantial gaps in the existing knowledge on mechanisms orchestrating virion assembly and disassembly. Biotechnological applications based on potyvirus nanoparticles is another important topic addressed here.

From stars to stripes: RNA-directed shaping of plant viral protein templates-structural synthetic virology for smart biohybrid nanostructures

The self-assembly of viral building blocks bears exciting prospects for fabricating new types of bionanoparticles with multivalent protein shells. These enable a spatially controlled immobilization of functionalities at highest surface densities-an increasing demand worldwide for applications from vaccination to tissue engineering, biocatalysis, and sensing. Certain plant viruses hold particular promise because they are sustainably available, biodegradable, nonpathogenic for mammals, and amenable to in vitro self-organization of virus-like particles. This offers great opportunities for their redesign into novel "green" carrier systems by spatial and structural synthetic biology approaches, as worked out here for the robust nanotubular tobacco mosaic virus (TMV) as prime example. Natural TMV of 300 x 18 nm is built from more than 2,100 identical coat proteins (CPs) helically arranged around a 6,395 nucleotides ssRNA. In vitro, TMV-like particles (TLPs) may self-assemble also from modified CPs and RNAs if the latter contain an Origin of Assembly structure, which initiates a bidirectional encapsidation. By way of tailored RNA, the process can be reprogrammed to yield uncommon shapes such as branched nanoobjects. The nonsymmetric mechanism also proceeds on 3'-terminally immobilized RNA and can integrate distinct CP types in blends or serially. Other emerging plant virus-deduced systems include the usually isometric cowpea chlorotic mottle virus (CCMV) with further strikingly altered structures up to "cherrybombs" with protruding nucleic acids. Cartoon strips and pictorial descriptions of major RNA-based strategies induct the reader into a rare field of nanoconstruction that can give rise to utile soft-matter architectures for complex tasks. This article is categorized under: Biology-Inspired Nanomaterials > Protein and Virus-Based Structures Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures.

Packaging of Genomic RNA in Positive-Sense Single-Stranded RNA Viruses: A Complex Story

The packaging of genomic RNA in positive-sense single-stranded RNA viruses is a key part of the viral infectious cycle, yet this step is not fully understood. Unlike double-stranded DNA and RNA viruses, this process is coupled with nucleocapsid assembly. The specificity of RNA packaging depends on multiple factors: (i) one or more packaging signals, (ii) RNA replication, (iii) translation, (iv) viral factories, and (v) the physical properties of the RNA. The relative contribution of each of these factors to packaging specificity is different for every virus. In vitro and in vivo data show that there are different packaging mechanisms that control selective packaging of the genomic RNA during nucleocapsid assembly. The goals of this article are to explain some of the key experiments that support the contribution of these factors to packaging selectivity and to draw a general scenario that could help us move towards a better understanding of this step of the viral infectious cycle.

Controllable Assembly of Flexible Protein Nanotubes for Loading Multifunctional Modules

Viruses with filamentous morphologies, such as tobacco mosaic virus (TMV) and M13 bacteriophage, have long been studied as multivalent nanoscaffolds for loading functional motifs. Structural assembly of the capsid proteins (CPs) of filamentous viruses often requires the presence of DNA or RNA molecules, which has limited their applications. Here, we describe a strategy for controllable assembly of flexible bio-nanotubes consisting of Escherichia coli expressed CP of baculovirus Helicoverpa armigera nucleopolyhedrovirus (HearNPV) in vitro. These protein-only nanotubes were studied as a new structural platform for high-density presentation of multiple active molecules on the exterior surface by direct fusion of the protein of interest to the N-terminus of HearNPV CP (HaCP). Structural characterization using cryoelectron microscopy demonstrated that the HaCP could assemble into two closely related but structurally distinct tube types, suggesting the tunable HaCP interaction network is the major contributor to the flexibility of HaCP nanotubes. Our flexible nanotubes could tolerate larger molecular modifications compared with TMV-based templates and could be used as promising candidates for versatile molecular loading applications.

TMV Particles: The Journey From Fundamental Studies to Bionanotechnology Applications

Ever since its initial characterization in the 19th century, tobacco mosaic virus (TMV) has played a prominent role in the development of modern virology and molecular biology. In particular, research on the three-dimensional structure of the virus particles and the mechanism by which these assemble from their constituent protein and RNA components has made TMV a paradigm for our current view of the morphogenesis of self-assembling structures, including viral particles. More recently, this knowledge has been applied to the development of novel reagents and structures for applications in biomedicine and bionanotechnology. In this article, we review how fundamental science has led to TMV being at the vanguard of these new technologies.

Next generation sequencing reveals packaging of host RNAs by brome mosaic virus

Although RNA viruses evolved the mechanisms of specific encapsidation, miss-packaging of cellular RNAs has been reported in such RNA virus systems as flock house virus or cucumber necrosis virus. To find out if brome mosaic virus (BMV), a tripartite RNA virus, can package cellular RNAs, BMV was propagated in barley and in Nicotiana benthamiana hosts, purified by cesium chloride (CsCl) gradient ultracentrifugation followed by nuclease treatment to remove any contaminating cellular (host) RNAs. The extracted virion RNA was then sequenced by using next-generation sequencing (NGS RNA-Seq) with the Illumina protocol. Bioinformatic analysis revealed the content of host RNAs ranging from 0.07% for BMV extracted from barley to 0.10% for the virus extracted from N. benthamiana. The viruses from two sources appeared to co-encapsidate different patterns of host-RNAs, including ribosomal RNAs (rRNAs), messenger RNAs (mRNAs) but also mitochondrial and plastid RNAs and, interestingly, transposable elements, both transposons and retrotransposons. Our data reveal that BMV virions can carry host RNAs, having a potential to mediate horizontal gene transfer (HGT) in plants.

Selective in Situ Assembly of Viral Protein onto DNA Origami

Engineering hybrid protein-DNA assemblies in a controlled manner has attracted particular attention, for their potential applications in biomedicine and nanotechnology due to their intricate folding properties and important physiological roles. Although DNA origami has served as a powerful platform for spatially arranging functional molecules, in situ assembly of proteins onto DNA origami is still challenging, especially in a precisely controlled and facile manner. Here, we demonstrate in situ assembly of tobacco mosaic virus (TMV) coat proteins onto DNA origami to generate programmable assembly of hybrid DNA origami-protein nanoarchitectures. The protein nanotubes of controlled length are precisely anchored on the DNA origami at selected locations using TMV genome-mimicking RNA strands. This study opens a new route to the organization of protein and DNA into sophisticated protein-DNA nanoarchitectures by harnessing the viral encapsidation mechanism and the programmability of DNA origami.

So What Have Plant Viruses Ever Done for Virology and Molecular Biology?

The discovery of a new class of pathogen, viruses, in the late 19th century, ushered in a period of study of the biochemical and structural properties of these entities in which plant viruses played a prominent role. This was, in large part, due to the relative ease with which sufficient quantities of material could be produced for such analyses. As analytical techniques became increasingly sensitive, similar studies could be performed on the viruses from other organisms. However, plant viruses continued to play an important role in the development of molecular biology, including the demonstration that RNA can be infectious, the determination of the genetic code, the mechanism by which viral RNAs are translated, and some of the early studies on gene silencing. Thus, the study of plant viruses should not be considered a "niche" subject but rather part of the mainstream of virology and molecular biology.

Bottom-Up Assembly of TMV-Based Nucleoprotein Architectures on Solid Supports

RNA-guided self-assembly of tobacco mosaic virus (TMV)-like nucleoprotein nanotubes is possible using 3'-terminally surface-linked scaffold RNAs containing the viral origin of assembly (OAS). In combination with TMV coat protein (CP) preparations, these scaffold RNAs can direct the growth of selectively addressable multivalent carrier particles directly at sites of interest on demand. Serving as adapter templates for the installation of functional molecules, they may promote an integration of active units into miniaturized technical devices, or enable their presentation on soft-matter nanotube systems at high surface densities advantageous for, for example, biodetection or purification applications. This chapter describes all procedures essential for the bottom-up fabrication of "nanostar" colloids with gold cores and multiple TMV-like arms, immobilized in a programmable manner by way of hybridization of the RNA scaffolds to oligodeoxynucleotides exposed on the gold beads.

Adoption of the 2A Ribosomal Skip Principle to Tobacco Mosaic Virus for Peptide Display

Plant viruses are suitable as building blocks for nanomaterials and nanoparticles because they are easy to modify and can be expressed and purified using plants or heterologous expression systems. Plant virus nanoparticles have been utilized for epitope presentation in vaccines, for drug delivery, as nanospheres and nanowires, and for biomedical imaging applications. Fluorescent protein fusions have been instrumental for the tagging of plant virus particles. The monomeric non-oxygen-dependent fluorescent protein iLOV can be used as an alternative to green fluorescent protein. In this study, the iLOV sequence was genetically fused either directly or via a glycine-serine linker to the C-terminus of the Tobacco mosaic virus (TMV) coat protein (CP) and also carried an N-terminal Foot-and-mouth disease virus (FMDV) 2A sequence. Nicotiana benthamiana plants were inoculated with recombinant viral vectors and a systemic infection was achieved. The presence of iLOV fusion proteins and hybrid particles was confirmed by western blot analysis and transmission electron microscopy. Our data suggest that TMV-based vectors are suitable for the production of proteins at least as large as iLOV when combined with the FMDV 2A sequence. This approach allowed the simultaneous production of foreign proteins fused to the CP as well as free CP subunits.

In Planta Synthesis of Designer-Length Tobacco Mosaic Virus-Based Nano-Rods That Can Be Used to Fabricate Nano-Wires

We have utilized plant-based transient expression to produce tobacco mosaic virus (TMV)-based nano-rods of predetermined lengths. This is achieved by expressing RNAs containing the TMV origin of assembly sequence (OAS) and the sequence of the TMV coat protein either on the same RNA molecule or on two separate constructs. We show that the length of the resulting nano-rods is dependent upon the length of the RNA that possesses the OAS element. By expressing a version of the TMV coat protein that incorporates a metal-binding peptide at its C-terminus in the presence of RNA containing the OAS we have been able to produce nano-rods of predetermined length that are coated with cobalt-platinum. These nano-rods have the properties of defined-length nano-wires that make them ideal for many developing bionanotechnological processes.

Coassembly of Tobacco Mosaic Virus Coat Proteins into Nanotubes with Uniform Length and Improved Physical Stability

Using tobacco mosaic virus coat proteins (TMVcp) from both sources of the plant and bacterial expression systems as building blocks, we demonstrate here a coassembly strategy of TMV nanotubes in the presence of RNA. Specifically, plant-expressed cp (cpp) efficiently dominates the genomic RNA encapsidation to determine the length of assembled TMV nanotubes, whereas the incorporated Escherichia coli-expressed cp (cpec) improves the physical stability of TMV nanotubes by introducing disulfide bonds between the interfaces of subunits. We expect this coassembly strategy can be expanded to other virus nanomaterials to obtain desired properties based on rationally designed protein-RNA and protein-protein interfacial interactions.

A Cell-Free Assembly System for Generating Infectious Human Papillomavirus 16 Capsids Implicates a Size Discrimination Mechanism for Preferential Viral Genome Packaging

We have established a cell-free in vitro system to study human papillomavirus type 16 (HPV16) assembly, a poorly understood process. L1/L2 capsomers, obtained from the disassembly of virus-like particles (VLPs), were incubated with nuclear extracts to provide access to the range of cellular proteins that would be available during assembly within the host cell. Incorporation of a reporter plasmid "pseudogenome" was dependent on the presence of both nuclear extract and ATP. Unexpectedly, L1/L2 VLPs that were not disassembled prior to incubation with a reassembly mixture containing nuclear extract also encapsidated a reporter plasmid. As with HPV pseudoviruses (PsV) generated intracellularly, infection by cell-free particles assembled in vitro required the presence of L2 and was susceptible to the same biochemical inhibitors, implying the cell-free assembled particles use the infectious pathway previously described for HPV16 produced in cell culture. Using biochemical and electron microscopy analyses, we observed that, in the presence of nuclear extract, intact VLPs partially disassemble, providing a mechanistic explanation to how the exogenous plasmid was packaged by these particles. Further, we provide evidence that capsids containing an <8-kb pseudogenome are resistant to the disassembly/reassembly reaction. Our results suggest a novel size discrimination mechanism for papillomavirus genome packaging in which particles undergo iterative rounds of disassembly/reassembly, seemingly sampling DNA until a suitably sized DNA is encountered, resulting in the formation of a stable virion structure.

IMPORTANCE

Little is known about papillomavirus assembly biology due to the difficulties in propagating virus in vitro. The cell-free assembly method established in this paper reveals a new mechanism for viral genome packaging and will provide a tractable system for further dissecting papillomavirus assembly. The knowledge gained will increase our understanding of virus-host interactions, help to identify new targets for antiviral therapy, and allow for the development of new gene delivery systems based on in vitro-generated papillomavirus vectors.

RNA-controlled assembly of tobacco mosaic virus-derived complex structures: from nanoboomerangs to tetrapods

The in vitro assembly of artificial nanotubular nucleoprotein shapes based on tobacco mosaic virus-(TMV-)-derived building blocks yielded different spatial organizations of viral coat protein subunits on genetically engineered RNA molecules, containing two or multiple TMV origins of assembly (OAs). The growth of kinked nanoboomerangs as well as of branched multipods was determined by the encapsidated RNAs. A largely simultaneous initiation at two origins and subsequent bidirectional tube elongation could be visualized by transmission electron microscopy of intermediates and final products. Collision of the nascent tubes' ends produced angular particles with well-defined arm lengths. RNAs with three to five OAs generated branched multipods with a maximum of four arms. The potential of such an RNA-directed self-assembly of uncommon nanotubular architectures for the fabrication of complex multivalent nanotemplates used in functional hybrid materials is discussed.

Virus infection cycle events coupled to RNA replication

Replication, the process by which the genetic material of a virus is copied to generate multiple progeny genomes, is the central part of the virus infection cycle. For an infection to be productive, it is essential that this process is coordinated with other aspects of the cycle, such as translation of the viral genome, encapsidation, and movement of the genome between cells. In the case of positive-strand RNA viruses, this represents a particular challenge, as the infecting genome must not only be replicated but also serve as an mRNA for the production of the replication-associated proteins. In recent years, it has become apparent that in positive-strand RNA plant viruses all the aspects of the infection cycle are intertwined. This article reviews the current state of knowledge regarding replication-associated events in such viruses.

The role of the 5'-cap structure in viral ribonucleoproteins assembly from potato virus X coat protein and RNAs

The potato virus X (PVX) virion can be reconstituted in vitro from the virus coat protein (CP) and RNA; heterologous RNAs may be used as well. In our recent study, structure and properties of cognate and heterologous viral ribonucleoproteins (vRNPs) were demonstrated to be similar to those of native virions. The assembly was found to be initiated at the 5' terminus of an RNA and was not dependent on RNA sequence. The aim of the present study was to search for a signal or an essential structural element that directs packaging of viral genetic material into vRNPs. vRNPs were formed by incubation of the PVX CP with heterologous capped RNAs, their functional fragments lacking the cap structure, as well as the capped and uncapped transcripts corresponding to the 5'-terminal region of the genomic PVX RNA. Experimental data show that the presence of the cap structure at the 5' end of a nucleic acid is an important condition for vRNP assembly from RNA and CP. Presumably, the 5'-cap affects conformational state of the RNA region responsible for the efficient interaction with CP and creates conformational encapsidation signal for vRNP assembly.

Deletions within the 3' non-translated region of Alfalfa mosaic virus RNA4 do not affect replication but significantly reduce long-distance movement of chimeric Tobacco mosaic virus

Alfalfa mosaic virus (AlMV) RNAs 1 and 2 with deletions in their 3' non‑translated regions (NTRs) have been previously shown to be encapsidated into virions by coat protein (CP) expressed from RNA3, indicating that the 3' NTRs of RNAs 1 and 2 are not required for virion assembly. Here, we constructed various mutants by deleting sequences within the 3' NTR of AlMV subgenomic (sg) RNA4 (same as of RNA3) and examined the effect of these deletions on replication and translation of chimeric Tobacco mosaic virus (TMV) expressing AlMV sgRNA4 from the TMV CP sg promoter (Av/A4) in tobacco protoplasts and Nicotiana benthamiana plants. While the Av/A4 mutants were as competent as the wild-type Av/A4 in RNA replication in protoplasts, their encapsidation, long-distance movement and virus accumulation varied significantly in N. benthamiana. These data suggest that the 3' NTR of AlMV sgRNA4 contains potential elements necessary for virus encapsidation.

TMV nanorods with programmed longitudinal domains of differently addressable coat proteins

The spacing of functional nanoscopic elements may play a fundamental role in nanotechnological and biomedical applications, but is so far rarely achieved on this scale. In this study we show that tobacco mosaic virus (TMV) and the RNA-guided self-assembly process of its coat protein (CP) can be used to establish new nanorod scaffolds that can be loaded not only with homogeneously distributed functionalities, but with distinct molecule species grouped and ordered along the longitudinal axis. The arrangement of the resulting domains and final carrier rod length both were governed by RNA-templated two-step in vitro assembly. Two selectively addressable TMV CP mutants carrying either thiol (TMVCys) or amino (TMVLys) groups on the exposed surface were engineered and shown to retain reactivity towards maleimides or NHS esters, respectively, after acetic acid-based purification and re-assembly to novel carrier rod types. Stepwise combination of CP(Cys) and CP(Lys) with RNA allowed fabrication of TMV-like nanorods with a controlled total length of 300 or 330 nm, respectively, consisting of adjacent longitudinal 100-to-200 nm domains of differently addressable CP species. This technology paves the way towards rod-shaped scaffolds with pre-defined, selectively reactive barcode patterns on the nanometer scale.

Protein nanotubes, channels and cages

Proteins are the work-horses of life and excute the essential processes involved in the growth and repair of cells. These roles include all aspects of cell signalling, metabolism and repair that allow living things to exist. They are not only chemical catalysts and machine components, they are also structural components of the cell or organism, capable of self-organisation into strong supramolecular cages, fibres and meshes. How proteins are encoded genetically and how they are sythesised in vivo is now well understood, and for an increasing number of proteins, the relationship between structure and function is known in exquisite detail. The next challenge in bionanoscience is to adapt useful protein systems to build new functional structures. Well-defined natural structures with potential useful shapes are a good starting point. With this in mind, in this chapter we discuss the properties of natural and artificial protein channels, nanotubes and cages with regard to recent progress and potential future applications. Chemistries for attaching together different proteins to form superstructures are considered as well as the difficulties associated with designing complex protein structures ab initio.

Helical viruses

Virtually all studies of structure and assembly of viral filaments have been made on plant and bacterial viruses. Structures have been determined using fiber diffraction methods at high enough resolution to construct reliable molecular models or several of the rigid plant tobamoviruses (related to tobacco mosaic virus, TMV) and the filamentous bacteriophages including Pf1 and fd. Lower-resolution structures have been determined for a number of flexible filamentous plant viruses using fiber diffraction and cryo-electron microscopy. Virions of filamentous viruses have numerous mechanical functions, including cell entry, viral disassembly, viral assembly, and cell exit. The plant viruses, which infect multicellular organisms, also use virions or virion-like assemblies for transport within the host. Plant viruses are generally self-assembling; filamentous bacteriophage assembly is combined with secretion from the host cell, using a complex molecular machine. Tobamoviruses and other plant viruses disassemble concomitantly with translation, by various mechanisms and involving various viral and host assemblies. Plant virus movement within the host also makes use of a variety of viral proteins and modified host assemblies.

Hydrogen-bonding networks and RNA bases revealed by cryo electron microscopy suggest a triggering mechanism for calcium switches

Helical assemblies such as filamentous viruses, flagella, and F-actin represent an important category of structures in biology. As the first discovered virus, tobacco mosaic virus (TMV) was at the center of virus research. Previously, the structure of TMV was solved at atomic detail by X-ray fiber diffraction but only for its dormant or high-calcium-concentration state, not its low-calcium-concentration state, which is relevant to viral assembly and disassembly inside host cells. Here we report a helical reconstruction of TMV in its calcium-free, metastable assembling state at 3.3 Å resolution by cryo electron microscopy, revealing both protein side chains and RNA bases. An atomic model was built de novo showing marked differences from the high-calcium, dormant-state structure. Although it could be argued that there might be inaccuracies in the latter structure derived from X-ray fiber diffraction, these differences can be interpreted as conformational changes effected by calcium-driven switches, a common regulatory mechanism in plant viruses. Our comparisons of the structures of the low- and high-calcium states indicate that hydrogen bonds formed by Asp116 and Arg92 in the place of the calcium ion of the dormant (high-calcium) state might trigger allosteric changes in the RNA base-binding pockets of the coat protein. In turn, the coat protein-RNA interactions in our structure favor an adenine-X-guanine (A*G) motif over the G*A motif of the dormant state, thus offering an explanation underlying viral assembly initiation by an AAG motif.

Correlation between particle multiplicity and location on virion RNA of the assembly initiation site for viruses of the tobacco mosaic virus group

The initiation site for reconstitution on genome RNA was determined by electron microscopic serology for a watermelon strain of cucumber green mottle mosaic virus (CGMMV-W), which is chemically and serologically related to tobacco mosaic virus (TMV). The initiation site was located at the same position as that of the cowpea strain, a virus that produces short rods of encapsidated subgenomic messenger RNA for the coat protein (a two-component TMV), being about 320 nucleotides away from the 3' terminus, and hence within the coat protein cistron. Although CGMMV-W was until now believed to be a single-component TMV, the location of the initiation site indicated the presence of short rods containing coat protein messenger RNA in CGMMV-W-infected tissue, as in the case for the cowpea strain. We found such short rods in CGMMV-W-infected tissue. The results confirmed our previous hypothesis that the site of the initiation region for reconstitution determines the rod multiplicity of TMV. The finding of the second two-component TMV, CGMMV, indicates that the cowpea strain of TMV is not unique in being a two-component virus and that the location of the assembly initiation site on the genome RNA can be a criterion for grouping of viruses.

The Pro/Hel region is indispensable for packaging non-replicating turnip yellow mosaic virus RNA, but not replicating viral RNA

Turnip yellow mosaic virus (TYMV) is a spherical plant virus that has a single 6.3 kb positive strand RNA. The genomic RNA has a tRNA-like structure (TLS) at the 3'-end. The 3'-TLS and hairpins in the 5'-untranslated region supposedly serve as packaging signals; however, recent studies have shown that they do not play a role in TYMV RNA packaging. In this study, we focused on packaging signals by examining a series of deletion mutants of TYMV. Analysis of encapsidated viral RNA after agroinfiltration of the deletion constructs into Nicotiana benthamiana showed that the mutant RNA lacking the protease (Pro)/helicase (Hel) region was not encapsidated by the coat proteins provided in trans, implicating that a packaging signal lies in the Pro/Hel region. Examination of two Pro(-)Hel(-) mutants showed that protein activity from the Pro/Hel domains was dispensable for the packaging of the non-replicating TYMV RNA. In contrast, the mutant TYMV RNA lacking the Pro/Hel region was efficiently encapsidated when the mutant TYMV was co-introduced with a wild-type TYMV, suggesting that packaging mechanisms might differ depending on whether the virus is replicating or not.

Viral genomic single-stranded RNA directs the pathway toward a T=3 capsid

The molecular mechanisms controlling genome packaging by single-stranded RNA viruses are still largely unknown. It is necessary in most cases for the protein to adopt different conformations at different positions on the capsid lattice in order to form a viral capsid from multiple copies of a single protein. We showed previously that such quasi-equivalent conformers of RNA bacteriophage MS2 coat protein dimers (CP(2)) can be switched by sequence-specific interaction with a short RNA stem-loop (TR) that occurs only once in the wild-type phage genome. In principle, multiple switching events are required to generate the phage T=3 capsid. We have therefore investigated the sequence dependency of this event using two RNA aptamer sequences selected to bind the phage coat protein and an analogous packaging signal from phage Qbeta known to be discriminated against by MS2 coat protein both in vivo and in vitro. All three non-cognate stem-loops support T=3 shell formation, but none shows the kinetic-trapping effect seen when TR is mixed with equimolar CP(2). We show that this reflects the fact that they are poor ligands compared with TR, failing to saturate the coat protein under the assay conditions, ensuring that sufficient amounts of both types of dimer required for efficient assembly are present in these reactions. Increasing the non-cognate RNA concentration restores the kinetic trap, confirming this interpretation. We have also assessed the effects of extending the TR stem-loop at the 5' or 3' end with short genomic sequences. These longer RNAs all show evidence of the kinetic trap, reflecting the fact that they all contain the TR sequence and are more efficient at promoting capsid formation than TR. Mass spectrometry has shown that at least two pathways toward the T=3 shell occur in TR-induced assembly reactions: one via formation of a 3-fold axis and another that creates an extended 5-fold complex. The longer genomic RNAs suppress the 5-fold pathway, presumably as a consequence of steric clashes between multiply bound RNAs. Reversing the orientation of the extension sequences with respect to the TR stem-loop produces RNAs that are poor assembly initiators. The data support the idea that RNA-induced protein conformer switching occurs throughout assembly of the T=3 shell and show that both positional and sequence-specific effects outside the TR stem-loop can have significant impacts on the precise assembly pathway followed.

Identification of an Arabidopsis thaliana protein that binds to tomato mosaic virus genomic RNA and inhibits its multiplication

The genomic RNAs of positive-strand RNA viruses carry RNA elements that play positive, or in some cases, negative roles in virus multiplication by interacting with viral and cellular proteins. In this study, we purified Arabidopsis thaliana proteins that specifically bind to 5' or 3' terminal regions of tomato mosaic virus (ToMV) genomic RNA, which contain important regulatory elements for translation and RNA replication, and identified these proteins by mass spectrometry analyses. One of these host proteins, named BTR1, harbored three heterogeneous nuclear ribonucleoprotein K-homology RNA-binding domains and preferentially bound to RNA fragments that contained a sequence around the initiation codon of the 130K and 180K replication protein genes. The knockout and overexpression of BTR1 specifically enhanced and inhibited, respectively, ToMV multiplication in inoculated A. thaliana leaves, while such effect was hardly detectable in protoplasts. These results suggest that BTR1 negatively regulates the local spread of ToMV.

Properties of the tobacco mosaic virus intermediate length RNA-2 and its translation

The existence of subgenomic RNAs is well established in the case of plant viruses such as tobacco mosaic virus (TMV). However, except for the subgenomic coat protein mRNA, it is not known whether the other subgenomic RNAs have a function in the life cycle of the virus. In search of more information about one of the major subgenomic RNAs-intermediate length RNA-2 or I2 RNA-of TMV, in vitro and in vivo translational studies were performed. The I2 RNA, which codes in vitro for the synthesis of a 30K (K = kilodalton) protein, appears to be uncapped as judged by the need of different in vitro translation conditions for the synthesis of this protein, compared to the conditions required for the synthesis of the 126K and 183K proteins coded by the capped genomic RNA. In vivo a protein migrating in the same position as the 30K protein synthesized in vitro can be detected in infected tobacco leaves. Since this protein occurs transiently early upon infection, whether it is virus-coded or virus-induced, it could have an early function during infection.

Nucleotide sequence of the coat protein cistron and the 3' noncoding region of cucumber green mottle mosaic virus (watermelon strain) RNA

Double-stranded cDNA copies of cucumber green mottle mosaic virus (watermelon strain, CGMMV-W) RNA polyadenylated in vitro were cloned into the pBR322 at the PstI site. The sequence of 1071 nucleotides from the Tend of the genomic RNA was determined using two recombinant plasmids and the genomic RNA. The coat protein cistron was located in residues 176-661 from the 3' end. The coat protein was composed of 160 amino acid residues with the molecular weight of 17,261. The 3' noncoding region of the CGMMVW genome was 175 nucleotides long and highly homologous to that of the common strain of TMV. The assembly origin of reconstitution is positioned within the coat protein cistron as predicted previously. In the 5' flanking region of the coat protein cistron a long open frame, probably of 30K protein, was found. The predicted 30K and the coat protein cistron would overlap each other as is the case of the cowpea strain of TMV.

The interaction between tylophorine B and TMV RNA

Tylophorine B exhibits 60% inhibition against tobacco mosaic virus (TMV) at a concentration of 1.0 x 10(-6) g/ml. In our study, high affinity for TMV RNA and assembly origin of TMV RNA (oriRNA) was revealed, accompanied by the conformational change of RNA. Considering that TMV assembly begins with the specific recognition by the coat protein aggregate of oriRNA, and that tylophorine B has favorable interaction with oriRNA, we speculate that tylophorine B likely exerts its virus inhibition by binding to oriRNA and interfering with virus assembly initiation. This work may shed light on the possible molecular inhibition mechanism against TMV by tylophorine B, and provide clues in rational design of sequence-specific RNA binding antivirus drugs.

Genome packaging by spherical plant RNA viruses

The majority of positive-strand RNA viruses of plants replicate and selectively encapsidate their progeny genomes into stable virions in cytoplasmic compartments of the cell where the opportunity to copackage cellular RNA also exists. Remarkably, highly purified infectious virions contain almost exclusively viral RNA, suggesting that mechanisms exist to regulate preferential packaging of viral genomes. The general principle that governs RNA packaging is an interaction between the structural CP and a specific RNA signal. Mechanisms that enhance selective packaging of viral genomes and formation of infectious virions may involve factors other than CP and nucleic acid sequences. The possible involvement of replicase proteins is an example. Our knowledge concerning genome packaging among spherical plant RNA viruses is still maturing. The main focus of this review is to discuss factors that have limited progress and to evaluate recent technical breakthroughs likely to help unravel the mechanism of RNA packaging among viruses of agronomic importance. A key breakthrough is the development of in vivo systems and comparisons with results obtained in vitro.

A bipartite Tobacco mosaic virus-defective RNA (dRNA) system to study the role of the N-terminal methyl transferase domain in cell-to-cell movement of dRNAs

Plant viruses, in particular Tobacco mosaic virus (TMV), are model systems to study RNA and protein trafficking in plants. Although TMV cell-to-cell transport controlled by the 30-kDa movement protein (MP) has been intensively studied, it was only recently demonstrated that the 126/183-kDa replicase proteins are also involved in cell-to-cell movement. Elucidating the role(s) of 126/183-kDa proteins in movement is complicated because these proteins have multiple functions associated with replication and gene expression. To overcome these difficulties we developed a TMV helper virus-defective RNA (dRNA) system to study the role of replicase protein sequences in dRNA cell-to-cell movement. Artificially constructed dRNAs lacking sequences encoding the helicase and polymerase domains of the replicase proteins and portions of the MP were viable in protoplasts and plants in the presence of helper virus. Expression of at least approximately 50% of the methyl transferase (MT) domain was required for efficient dRNA movement in Nicotiana benthamiana. dRNAs that encoded the N-terminal 64 replicase amino acids or lacked a translatable MT domain failed to move or moved poorly. TMV dRNAs expressing 258 amino acids of the replicase protein moved into all specialized non-vascular tissues, whereas dRNAs expressing replicase sequences beyond amino acid 258 were restricted to the epidermis and palisade mesophyll tissues. Furthermore, second-site mutations within the dRNA-encoded truncated replicase protein altered efficiency in dRNA cell-to-cell movement.

cis-Acting sequences required for coat protein binding and in vitro assembly of Potato virus X

The 5' region of Potato virus X (PVX) RNA containing an AC-rich single-stranded region and stem-loop 1 (SL1) has been shown to be important for PVX replication (Miller, E.D., Plante, C.A., Kim, K.-H., Brown, J.W., Hemenway, C., 1998. Stem-loop structure in the 5' region of potato virus X genome required for plus-strand RNA accumulation. J. Mol. Biol. 284, 591-608.). Here, we describe the involvement of SL1 for binding to the PVX coat protein (CP) using an in vitro assembly system and various deletion mutants of the 5' region of PVX RNA. Internal and 5' terminal deletions of the 5'-nontranslated region of PVX RNA were assessed for their effects on formation of assembled virus-like particles (VLPs). Mutant RNAs that contain the top region of SL1 or sequences therein bound to CP to form VLPs. In contrast, transcripts of mutants that disrupt SL1 RNA structure were unable to form VLPs. SELEX was used to further confirm the specific RNA recognition of PVX CP using RNA transcripts containing randomized sequences of the upper portion of SL1. Wild-type (wt) sequences along with many other sequences that resemble SL1 structure were selected after fourth and fifth rounds of SELEX (27.0% and 44.4%, respectively). RNA transcripts from several SELEX winners that are predicted to form stable stem-loop structures very closely resembling wt PVX SL1 VLPs. RNA transcripts not predicted to form secondary structures similar to SL1 did not form VLPs in vitro. Taken together, our results suggest that RNA secondary structural elements within SL1 and/or sequences therein are crucial for formation of VLPs and are required for the specific recognition by the CP subunit.

Packaging of brome mosaic virus RNA3 is mediated through a bipartite signal

The three genomic and a single subgenomic RNA of brome mosaic virus (BMV), an RNA virus infecting plants, are packaged by a single-coat protein (CP) into three morphologically indistinguishable icosahedral virions with T = 3 quasi-symmetry. Genomic RNAs 1 and 2 are packaged individually into separate particles whereas genomic RNA3 and subgenomic RNA4 (coat protein mRNA) are copackaged into a single particle. We report here that packaging of dicistronic RNA3 requires a bipartite signal. A highly conserved 3' tRNA-like structure postulated to function as a nucleating element (NE) for CP subunits (Y. G. Choi, T. W. Dreher, and A. L. N. Rao, Proc. Natl. Acad. Sci. USA 99:655-660, 2002) and a cis-acting, position-dependent packaging element (PE) of 187 nt present in the nonstructural movement protein gene are the integral components of the packaging core. Efficient incorporation into BMV virions of nonviral RNA chimeras containing NE and the PE provides confirmatory evidence that these two elements are sufficient to direct packaging. Analysis of virion RNA profiles obtained from barley protoplasts transfected with a RNA3 variant lacking the PE provides the first genetic evidence that de novo synthesized RNA4 is incompetent for autonomous assembly whereas prior packaging of RNA3 is a prerequisite for RNA4 to copackage.

cis-acting elements required for efficient packaging of brome mosaic virus RNA3 in barley protoplasts

Brome mosaic virus (BMV) is a positive-sense RNA plant virus, the tripartite genomic RNAs of which are separately packaged into virions. RNA3 is copackaged with subgenomic RNA4. In barley protoplasts coinoculated with RNA1 and RNA2, an RNA3 mutant with a 69-nucleotide (nt) deletion in the 3'-proximal region of the 3a open reading frame (ORF) was very poorly packaged compared with other RNA3 mutants and wild-type RNA3, despite their comparable accumulation in the absence of coat protein. Computer analysis of RNA secondary structure predicted two stem-loop (SL) structures (i.e., SL-I and SL-II) in the 69-nt region. Disruption of SL-II, but not of SL-I, significantly reduced RNA3 packaging. A chimeric BMV RNA3 (B3Cmp), with the BMV 3a ORF replacing that of cucumber mosaic virus (CMV), was packaged negligibly, whereas RNA4 was packaged efficiently. Replacement of the 3'-proximal region of the CMV 3a ORF in B3Cmp with the 3'-proximal region of the BMV 3a ORF significantly improved packaging efficiency, and the disruption of SL-II in the substituted BMV 3a ORF region greatly reduced packaging efficiency. These results suggest that the 3'-proximal region of the BMV 3a ORF, especially SL-II predicted between nt 904 and 933, plays an important role in the packaging of BMV RNA3 in vivo. Furthermore, the efficient packaging of RNA4 without RNA3 in B3Cmp-infected cells implies the presence of an element in the 3a ORF of BMV RNA3 that regulates the copackaging of RNA3 and RNA4.

Mapping of viral RNA sequences required for assembly of peanut clump virus particles

RNA sequences required for assembly into rod-shaped virions of RNA-1 and RNA-2 of Peanut clump virus (PCV) were mapped by testing the ability of different RNA-1 and -2 deletion mutants to be encapsidated in vivo in an RNase-resistant form. Encapsidation of RNA-1 was found to require a sequence domain in the 5'-proximal part of the P15 gene, the 3'-proximal gene of RNA-1. On the other hand, the subgenomic RNA which encodes P15 was not encapsidated, suggesting that other features of RNA-1 are important as well. Two sequences which could drive encapsidation of RNA-2 deletion mutants were located. One was in the 5'-proximal coat protein gene and the other in the P14 gene near the RNA 3' terminus. There were no obvious sequence homologies between the different assembly initiation sequences.

Turnip vein-clearing virus, from pathogen to host expression profile

SUMMARY Taxonomy: Turnip vein-clearing virus (TVCV) is a member of subgroup 3 of the Tobamovirus genus and is thus a member of the alphavirus-like supergroup of positive sense RNA-containing viruses. Physical properties: Virions, typical of tobamoviruses, are rod-shaped and consist of a single species of four-helix bundle capsid proteins of 17 kDa helically arranged around a 6.3 knt RNA which accounts for 5% of the virion mass. Virions are stable for years. Hosts: Members of the crucifer family are excellent hosts. Particularly noteworthy is that hosts include the model plant for molecular genetics, Arabidopsis thaliana. No non-mechanical vectors of transmission are known.