Plasmid construction by homologous recombination in yeast

Development of a metabolic engineering technology to simultaneously suppress the expression of multiple genes in yeast and application in carotenoid production

In yeast metabolic engineering, there is a need for technologies that simultaneously suppress and regulate the expression of multiple genes and improve the production of target chemicals. In this study, we aimed to develop a novel technology that simultaneously suppresses the expression of multiple genes by combining RNA interference with global metabolic engineering strategy. Furthermore, using β-carotene as the target chemical, we attempted to improve its production by using the technology. First, we developed a technology to suppress the expression of the target genes with various strengths using RNA interference. Using this technology, total carotenoid production was successfully improved by suppressing the expression of a single gene out of 10 candidate genes. Then, using this technology, RNA interference strain targeting 10 candidate genes for simultaneous suppression was constructed. The total carotenoid production of the constructed RNA interference strain was 1.7 times compared with the parental strain. In the constructed strain, the expression of eight out of the 10 candidate genes was suppressed. We developed a novel technology that can simultaneously suppress the expression of multiple genes at various intensities and succeeded in improving carotenoid production in yeast. Because this technology can suppress the expression of any gene, even essential genes, using only gene sequence information, it is considered a useful technology that can suppress the formation of by-products during the production of various target chemicals by yeast.

In vivo assembly of genetic constructs in filamentous fungus Talaromyces cellulolyticus

In the filamentous fungus Talaromyces cellulolyticus, similar to other filamentous fungi, non-homologous recombination predominates over homologous recombination. For instance, to achieve an acceptable integration frequency of a genetic construct into a target site on the intact chromosome, the flanking sequences directing this integration should be approximately 2.5 kb in length. However, despite the requirement of long flanks for integration into the intact chromosome, we found that homologous recombination between linear DNA fragments in T. cellulolyticus effectively occurs when these fragments overlap by just 50 bp. This allows for the assembly of full-sized genetic constructs in vivo from relatively small blocks, eliminating the need for in vitro assembly, similar to the approach previously developed for the yeast Saccharomyces cerevisiae. To validate this possibility, we replaced the native promoter of the target gene by transforming the recipient strain with five DNA fragments: two flanks for recombination with the target locus, two parts of the marker gene, and a donor promoter. This discovery significantly expedites the genetic engineering of T. cellulolyticus and potentially other fungi.

Structure-based engineering of Tor complexes reveals that two types of yeast TORC1 produce distinct phenotypes

Certain proteins assemble into diverse complex states, each having a distinct and unique function in the cell. Target of rapamycin (Tor) complex 1 (TORC1) plays a central role in signalling pathways that allow cells to respond to the environment, including nutritional status signalling. TORC1 is widely recognised for its association with various diseases. The budding yeast Saccharomyces cerevisiae has two types of TORC1, Tor1-containing TORC1 and Tor2-containing TORC1, which comprise different constituent proteins but are considered to have the same function. Here, we computationally modelled the relevant complex structures and then, based on the structures, rationally engineered a Tor2 mutant that could form Tor complex 2 (TORC2) but not TORC1, resulting in a redesign of the complex states. Functional analysis of the Tor2 mutant revealed that the two types of TORC1 induce different phenotypes, with changes observed in rapamycin, caffeine and pH dependencies of cell growth, as well as in replicative and chronological lifespan. These findings uncovered by a general approach with huge potential - model structure-based engineering - are expected to provide further insights into various fields such as molecular evolution and lifespan.

Synthetic Biology Tools for Engineering Aspergillus oryzae

For more than a thousand years, Aspergillus oryzae has been used in traditional culinary industries, including for food fermentation, brewing, and flavoring. In recent years, A. oryzae has been extensively used in deciphering the pathways of natural product synthesis and value-added compound bioproduction. Moreover, it is increasingly being used in modern biotechnology industries, such as for the production of enzymes and recombinant proteins. The investigation of A. oryzae has been significantly accelerated through the successive application of a diverse array of synthetic biology techniques and methodologies. In this review, the advancements in biological tools for the synthesis of A. oryzae, including DNA assembly technologies, gene expression regulatory elements, and genome editing systems, are discussed. Additionally, the challenges associated with the heterologous expression of A. oryzae are addressed.

Modern Approaches to de novo Synthesis of Extended DNA Fragments: Assembly of a Wide Repertoire of Sequences

The standardization of DNA fragment assembly methods for many tasks of synthetic biology is crucial. This is necessary for synthesizing a wider repertoire of sequences, as well as for further automation and miniaturization of such reactions. In this work, we proposed conditions for the assembly of DNA fragments from chemically synthesized oligonucleotides and we identified the errors occurring in the sequence under these conditions. Additionally, we proposed conditions for further combining synthetic fragments into larger DNA fragments. We showed that the optimized conditions are suitable for the assembly of a wide range of sequences.

Robust and Reproducible Protocol for Phage Genome "Rebooting" Using Transformation-Associated Recombination (TAR) Cloning into Yeast Centromeric Plasmid

Production of infectious bacteriophage based on its genome is one of the necessary steps in the pipeline of editing phage genomes and creating synthetic bacteriophages. This process is called "rebooting" of the phage genome. In this chapter, we describe key steps required for successful genome "rebooting" using a native host or intermediate host. A detailed protocol is given for the "rebooting" of the genome of T7 bacteriophage specific to Escherichia coli and bacteriophage KP32_192 that infects Klebsiella pneumoniae.

Transformation-associated recombination (TAR) cloning and its applications for gene function; genome architecture and evolution; biotechnology and biomedicine

Transformation-associated recombination (TAR) cloning represents a unique tool to selectively and efficiently recover a given chromosomal segment up to several hundred kb in length from complex genomes (such as animals and plants) and simple genomes (such as bacteria and viruses). The technique exploits a high level of homologous recombination in the yeast Sacharomyces cerevisiae. In this review, we summarize multiple applications of the pioneering TAR cloning technique, developed previously for complex genomes, for functional, evolutionary, and structural studies, and extended the modified TAR versions to isolate biosynthetic gene clusters (BGCs) from microbes, which are the major source of pharmacological agents and industrial compounds, and to engineer synthetic viruses with novel properties to design a new generation of vaccines. TAR cloning was adapted as a reliable method for the assembly of synthetic microbe genomes for fundamental research. In this review, we also discuss how the TAR cloning in combination with HAC (human artificial chromosome)- and CRISPR-based technologies may contribute to the future.

Automation protocol for high-efficiency and high-quality genomic DNA extraction from Saccharomyces cerevisiae

Although many protocols have been previously developed for genomic DNA (gDNA) extraction from S. cerevisiae, to take advantage of recent advances in laboratory automation and DNA-barcode sequencing, there is a need for automated methods that can provide high-quality gDNA at high efficiency. Here, we describe and demonstrate a fully automated protocol that includes five basic steps: cell wall and RNA digestion, cell lysis, DNA binding to magnetic beads, washing with ethanol, and elution. Our protocol avoids the use of hazardous reagents (e.g., phenol, chloroform), glass beads for mechanical cell disruption, or incubation of samples at 100°C (i.e., boiling). We show that our protocol can extract gDNA with high efficiency both from cells grown in liquid culture and from colonies grown on agar plates. We also show results from gel electrophoresis that demonstrate that the resulting gDNA is of high quality.

Identification and characterization of protein interactions with the major Niemann-Pick type C disease protein in yeast reveals pathways of therapeutic potential

Niemann-Pick type C (NP-C) disease is a rare lysosomal storage disease caused by mutations in NPC1 (95% cases) or NPC2 (5% cases). These proteins function together in cholesterol egress from the lysosome, whereby upon mutation, cholesterol and other lipids accumulate causing major pathologies. However, it is not fully understood how cholesterol is transported from NPC1 residing at the lysosomal membrane to the endoplasmic reticulum (ER) and plasma membrane. The yeast ortholog of NPC1, Niemann-Pick type C-related protein-1 (Ncr1), functions similarly to NPC1; when transfected into a mammalian cell lacking NPC1, Ncr1 rescues the diagnostic hallmarks of cholesterol and sphingolipid accumulation. Here, we aimed to identify and characterize protein-protein interactions (PPIs) with the yeast Ncr1 protein. A genome-wide split-ubiquitin membrane yeast two-hybrid (MYTH) protein interaction screen identified 11 ER membrane-localized, full-length proteins interacting with Ncr1 at the lysosomal/vacuolar membrane. These highlight the importance of ER-vacuole membrane interface and include PPIs with the Cyb5/Cbr1 electron transfer system, the ceramide synthase complex, and the Sec61/Sbh1 protein translocation complex. These PPIs were not detected in a sterol auxotrophy condition and thus depend on normal sterol metabolism. To provide biological context for the Ncr1-Cyb5 PPI, a yeast strain lacking this PPI (via gene deletions) exhibited altered levels of sterols and sphingolipids including increased levels of glucosylceramide that mimic NP-C disease. Overall, the results herein provide new physical and genetic interaction models to further use the yeast model of NP-C disease to better understand human NP-C disease.

Development of Terminator-Promoter Bifunctional Elements for Application in Saccharomyces cerevisiae Pathway Engineering

The construction of a genetic circuit requires the substitution and redesign of different promoters and terminators. The assembly efficiency of exogenous pathways will also decrease significantly when the number of regulatory elements and genes is increased. We speculated that a novel bifunctional element with promoter and terminator functions could be created via the fusion of a termination signal with a promoter sequence. In this study, the elements from a Saccharomyces cerevisiae promoter and terminator were employed to design a synthetic bifunctional element. The promoter strength of the synthetic element is apparently regulated through a spacer sequence and an upstream activating sequence (UAS) with a ~5-fold increase, and the terminator strength could be finely regulated by the efficiency element, with a ~5-fold increase. Furthermore, the use of a TATA box-like sequence resulted in the adequate execution of both functions of the TATA box and the efficiency element. By regulating the TATA box-like sequence, UAS, and spacer sequence, the strengths of the promoter-like and terminator-like bifunctional elements were optimally fine-tuned with ~8-fold and ~7-fold increases, respectively. The application of bifunctional elements in the lycopene biosynthetic pathway showed an improved pathway assembly efficiency and higher lycopene yield. The designed bifunctional elements effectively simplified pathway construction and can serve as a useful toolbox for yeast synthetic biology.

Acceleration of CRISPR/Cas9-Mediated Editing at Multiple Sites in the Saccharomyces cerevisiae Genome

The application of the CRISPR/Cas9-based genome editing technique to the yeast Saccharomyces cerevisiae has made it possible to simultaneously modify several sites, particularly to integrate several expression cassettes. The existing methods provide high efficiency for such modifications; however, common protocols include several preparatory steps, namely, the construction of an intermediate Cas9-expressing strain, the assembly of a plasmid bearing several single guide RNA (sgRNA) expression cassettes, and the surrounding integrated DNA fragments with long flanks for recombination with target loci. Since these preparatory steps are time consuming and may not be desirable in some types of experiments, we explored the possibility of multiple integration without these steps. We have demonstrated that it is possible to skip them simultaneously and integrate up to three expression cassettes into separate sites by transforming the recipient strain with the Cas9 expression plasmid, three differently marked sgRNA plasmids, and three donor DNAs flanked with short (70 bp) arms for recombination. This finding increases the flexibility of choosing the optimal experimental design for multiple editing of the genome of S. cerevisiae and can significantly accelerate such experiments.

Deep mutational scanning highlights a new role for cytosolic regions in Hrd1 function

Misfolded endoplasmic reticulum proteins are degraded through a process called endoplasmic reticulum associated degradation (ERAD). Soluble, lumenal ERAD targets are recognized, retrotranslocated across the ER membrane, ubiquitinated, extracted from the membrane, and degraded by the proteasome using an ERAD pathway containing a ubiquitin ligase called Hrd1. To determine how Hrd1 mediates these processes, we developed a deep mutational scanning approach to identify residues involved in Hrd1 function, including those exclusively required for lumenal degradation. We identified several regions required for different Hrd1 functions. Most surprisingly, we found two cytosolic regions of Hrd1 required for lumenal ERAD substrate degradation. Using in vivo and in vitro approaches, we defined roles for disordered regions between structural elements that were required for Hrd1's ability to autoubiquitinate and interact with substrate. Our results demonstrate that disordered cytosolic regions promote substrate retrotranslocation by controlling Hrd1 activation and establishing directionality of retrotranslocation for lumenal substrate across the endoplasmic reticulum membrane.

Rapid yeast-based screen for Functionally Relevant Amino Acids (RS-FRAA) in a protein

Here, we describe a fast and cost-effective procedure to generate a large array of mutant proteins and immediately screen for those with altered protein function. This protocol is a modification from three existing approaches: fusion PCR, Saccharomyces cerevisiae in-yeast recombination, and semi-quantitative growth assays. We also describe a mating step to reduce the occurrence of false positive findings due to ectopic mutations. The only requirement is that the protein elicits a phenotype in Saccharomyces cerevisiae.

Synonymous and Nonsynonymous Substitutions in Dictyostelium discoideum Ammonium Transporter amtA Are Necessary for Functional Complementation in Saccharomyces cerevisiae

Ammonium transporters are present in all three domains of life. They have undergone extensive horizontal gene transfer (HGT), gene duplication, and functional diversification and therefore offer an excellent paradigm to study protein evolution. We attempted to complement a mep1Δmep2Δmep3Δ strain of Saccharomyces cerevisiae (triple-deletion strain), which otherwise cannot grow on ammonium as a sole nitrogen source at concentrations of <3 mM, with amtA of Dictyostelium discoideum, an orthologue of S. cerevisiae MEP2. We observed that amtA did not complement the triple-deletion strain of S. cerevisiae for growth on low-ammonium medium. We isolated two mutant derivatives of amtA (amtA M1 and amtA M2) from a PCR-generated mutant plasmid library that complemented the triple-deletion strain of S. cerevisiae. amtA M1 bears three nonsynonymous and two synonymous substitutions, which are necessary for its functionality. amtA M2 bears two nonsynonymous substitutions and one synonymous substitution, all of which are necessary for functionality. Interestingly, AmtA M1 transports ammonium but does not confer methylamine toxicity, while AmtA M2 transports ammonium and confers methylamine toxicity, demonstrating functional diversification. Preliminary biochemical analyses indicated that the mutants differ in their conformations as well as their mechanisms of ammonium transport. These intriguing results clearly point out that protein evolution cannot be fathomed by studying nonsynonymous and synonymous substitutions in isolation. The above-described observations have significant implications for various facets of biological processes and are discussed in detail. IMPORTANCE Functional diversification following gene duplication is one of the major driving forces of protein evolution. While the role of nonsynonymous substitutions in the functional diversification of proteins is well recognized, knowledge of the role of synonymous substitutions in protein evolution is in its infancy. Using functional complementation, we isolated two functional alleles of the D. discoideum ammonium transporter gene (amtA), which otherwise does not function in S. cerevisiae as an ammonium transporters. One of them is an ammonium transporter, while the other is an ammonium transporter that also confers methylammonium (ammonium analogue) toxicity, suggesting functional diversification. Surprisingly, both alleles require a combination of synonymous and nonsynonymous substitutions for their functionality. These results bring out a hitherto-unknown pathway of protein evolution and pave the way for not only understanding protein evolution but also interpreting single nucleotide polymorphisms (SNPs).

Fungal Glycoside Hydrolases Display Unique Specificities for Polysaccharides and Staphylococcus aureus Biofilms

Commercially available cellulases and amylases can disperse the pathogenic bacteria embedded in biofilms. This suggests that polysaccharide-degrading enzymes would be useful as antibacterial therapies to aid the treatment of biofilm-associated bacteria, e.g., in chronic wounds. Using a published enzyme library, we explored the capacity of 76 diverse recombinant glycoside hydrolases to disperse Staphylococcus aureus biofilms. Four of the 76 recombinant glycoside hydrolases digested purified cellulose, amylose, or pectin. However, these enzymes did not disperse biofilms, indicating that anti-biofilm activity is not general to all glycoside hydrolases and that biofilm activity cannot be predicted from the activity on pure substrates. Only one of the 76 recombinant enzymes was detectably active in biofilm dispersion, an α-xylosidase from Aspergillus nidulans. An α-xylosidase cloned subsequently from Aspergillus thermomutatus likewise demonstrated antibiofilm activity, suggesting that α-xylosidases, in general, can disperse Staphylococcus biofilms. Surprisingly, neither of the two β-xylosidases in the library degraded biofilms. Commercial preparations of amylase and cellulase that are known to be effective in the dispersion of Staphylococcus biofilms were also analyzed. The commercial cellulase contained contaminating proteins with multiple enzymes exhibiting biofilm-dispersing activity. Successfully prospecting for additional antibiofilm enzymes may thus require large libraries and may benefit from purified enzymes. The complexity of biofilms and the diversity of glycoside hydrolases continue to make it difficult to predict or understand the enzymes that could have future therapeutic applications.

The polyHIS Tract of Yeast AMPK Coordinates Carbon Metabolism with Iron Availability

Energy status in all eukaryotic cells is sensed by AMP-kinases. We have previously found that the poly-histidine tract at the N-terminus of S. cerevisiae AMPK (Snf1) inhibits its function in the presence of glucose via a pH-regulated mechanism. We show here that in the absence of glucose, the poly-histidine tract has a second function, linking together carbon and iron metabolism. Under conditions of iron deprivation, when different iron-intense cellular systems compete for this scarce resource, Snf1 is inhibited. The inhibition is via an interaction of the poly-histidine tract with the low-iron transcription factor Aft1. Aft1 inhibition of Snf1 occurs in the nucleus at the nuclear membrane, and only inhibits nuclear Snf1, without affecting cytosolic Snf1 activities. Thus, the temporal and spatial regulation of Snf1 activity enables a differential response to iron depending upon the type of carbon source. The linkage of nuclear Snf1 activity to iron sufficiency ensures that sufficient clusters are available to support respiratory enzymatic activity and tests mitochondrial competency prior to activation of nuclear Snf1.

BigDNA: Primer Design Software for Overlap-Based Assembly of Phage Genomes and Larger DNAs

Background

Gibson assembly and assembly-in-yeast are strategies to create long synthetic DNAs from diverse fragments, for example, when engineering bacteriophage genomes. Design for these methods requires terminal sequence overlaps in the fragments, determining the order of assembly. Design to rebuild a genomic fragment that is too long for a single PCR presents a puzzle since some candidate joint regions cannot yield satisfactory primers for the overlap. No existing overlap assembly design software is open-source, and none explicitly supports rebuilding.

Methods

We describe here bigDNA software that solves the rebuilding puzzle by recursive backtracking, with options to remove or introduce genes; it also tests for mispriming on the template DNA. BigDNA was tested with 3082 prophages and other genomic islands (GIs), from 20 to 100 kb, and the synthetic Mycoplasma genitalium genome.

Results

Rebuilding assembly design succeeded for all but ∼1% of GIs.

Conclusion

BigDNA will speed and standardize assembly design.

Regulation of yeast Snf1 (AMPK) by a polyhistidine containing pH sensing module

Cellular regulation of pH is crucial for internal biological processes and for the import and export of ions and nutrients. In the yeast Saccharomyces cerevisiae, the major proton pump (Pma1) is regulated by glucose. Glucose is also an inhibitor of the energy sensor Snf1/AMPK, which is conserved in all eukaryotes. Here, we demonstrate that a poly-histidine (polyHIS) tract in the pre-kinase region (PKR) of Snf1 functions as a pH-sensing module (PSM) and regulates Snf1 activity. This regulation is independent from, and unaffected by, phosphorylation at T210, the major regulatory control of Snf1, but is controlled by the Pma1 plasma-membrane proton pump. By examining the PKR from additional yeast species, and by varying the number of histidines in the PKR, we determined that the polyHIS functions progressively. This regulation mechanism links the activity of a key enzyme with the metabolic status of the cell at any given moment.

A Versatile in Vivo DNA Assembly Toolbox for Fungal Strain Engineering

Efficient homologous recombination in baker's yeast allows accurate fusion of DNA fragments via short identical sequence tags in vivo. Eliminating the need for an Escherichia coli cloning step speeds up genetic engineering of this yeast and sets the stage for large high-throughput projects depending on DNA construction. With the aim of developing similar tools for filamentous fungi, we first set out to determine the genetic- and sequence-length requirements needed for efficient fusion reactions, and demonstrated that in nonhomologous end-joining deficient strains of Aspergillus nidulans, efficient fusions can be achieved by 25 bp sequence overlaps. Based on these results, we developed a novel fungal in vivo DNA assembly toolbox for simple and flexible genetic engineering of filamentous fungi. Specifically, we have used this method for construction of AMA1-based vectors, complex gene-targeting substrates for gene deletion and gene insertion, and for marker-free CRISPR based gene editing. All reactions were done via single-step transformations involving fusions of up to six different DNA fragments. Moreover, we show that it can be applied in four different species of Aspergilli. We therefore envision that in vivo DNA assembly can be advantageously used for many more purposes and will develop into a popular tool for fungal genetic engineering.

RimO (SrrB) is required for carbon starvation signaling and production of secondary metabolites in Aspergillus nidulans

Depending on the prevailing environmental, developmental and nutritional conditions, fungi activate biosynthetic gene clusters (BGCs) to produce condition-specific secondary metabolites (SMs). For activation, global chromatin-based de-repression must be integrated with pathway-specific induction signals. Here we describe a new global regulator needed to activate starvation-induced SMs. In our transcriptome dataset, we found locus AN7572 strongly transcribed solely under conditions of starvation-induced SM production. The predicted AN7572 protein is most similar to the stress and nutritional regulator Rim15 of Saccharomyces cerevisiae, and to STK-12 of Neurospora crassa. Based on this similarity and on stress and nutritional response phenotypes of A. nidulans knock-out and overexpression strains, AN7572 is designated rimO. In relation to SM production, we found that RimO is required for the activation of starvation-induced BGCs, including the sterigmatocystin (ST) gene cluster. Here, RimO regulates the pathway-specific transcription factor AflR both at the transcriptional and post-translational level. At the transcriptional level, RimO mediates aflR induction following carbon starvation and at the post-translational level, RimO is required for nuclear accumulation of the AflR protein. Genome-wide transcriptional profiling showed that cells lacking rimO fail to adapt to carbon starvation that, in the wild type, leads to down-regulation of genes involved in basic metabolism, membrane biogenesis and growth. Consistently, strains overexpressing rimO are more resistant to oxidative and osmotic stress, largely insensitive to glucose repression and strongly overproduce several SMs. Our data indicate that RimO is a positive regulator within the SM and stress response network, but this requires nutrient depletion that triggers both, rimO gene transcription and activation of the RimO protein.

Identification of Exported Plasmodium falciparum Proteins That Bind to the Erythrocyte Cytoskeleton

Plasmodium proteins are exported to the erythrocyte cytoplasm to create an environment that supports parasite replication. Although hundreds of proteins are predicted to be exported through Plasmodium export element (PEXEL)-dependent and -independent mechanisms, the functions of exported proteins are largely uncharacterized. In this study, we used a biochemical screening approach to identify putative exported P. falciparum proteins that bound to inside-out vesicles prepared from erythrocytes. Out of 69 P. falciparum PEXEL-motif proteins tested, 18 bound to inside-out vesicles (IOVs) in two or more independent assays. Using co-affinity purifications followed by mass spectrometry, pairwise co-purification experiments, and the split-luciferase assay, we identified 31 putative protein-protein interactions between erythrocyte cytoskeletal proteins and predicted exported P. falciparum proteins. We further showed that PF3D7_1401600 binds to the spectrin-binding domain of erythrocyte ankyrin via its MESA erythrocyte cytoskeleton binding (MEC) motif and to the N-terminal domains of ankyrin and 4.1R through a fragment that required an intact Plasmodium helical interspersed sub-telomeric (PHIST) domain. Introduction of PF3D7_1401600 into erythrocyte ghosts increased retention in the microsphiltration assay, consistent with previous data that reported a reduction of rigidity in red blood cells infected with PF3D7_1401600-deficient parasites.

Interactions of cytosolic tails in the Jen1 carboxylate transporter are critical for trafficking and transport activity

Plasma membrane (PM) transporters of the major facilitator superfamily (MFS) are essential for cell metabolism, growth and response to stress or drugs. In Saccharomyces cerevisiae, Jen1 is a monocarboxylate/H+ symporter that provides a model to dissect the molecular details underlying cellular expression, transport mechanism and turnover of MFS transporters. Here, we present evidence revealing novel roles of the cytosolic N- and C-termini of Jen1 in its biogenesis, PM stability and transport activity, using functional analyses of Jen1 truncations and chimeric constructs with UapA, an endocytosis-insensitive transporter of Aspergillus nidulans. Our results show that both N- and C-termini are critical for Jen1 trafficking to the PM, transport activity and endocytosis. Importantly, we provide evidence that Jen1 N- and C-termini undergo transport-dependent dynamic intramolecular interactions, which affect the transport activity and turnover of Jen1. Our results support an emerging concept where the cytoplasmic termini of PM transporters control transporter cell surface stability and function through flexible intramolecular interactions with each other. These findings might be extended to other MFS members to understand conserved and evolving mechanisms underlying transporter structure-function relationships. This article has an associated First Person interview with the first authors of the paper.

Production of an Active, Human Membrane Protein in Saccharomyces cerevisiae: Full-Length FICD

The human Fic domain-containing protein (FICD) is a type II endoplasmic reticulum (ER) membrane protein that is important for the maintenance of ER proteostasis. Structural and in vitro biochemical characterisation of FICD AMPylase and deAMPylase activity have been restricted to the soluble ER-luminal domain produced in Escherichia coli. Information about potentially important features, such as structural motifs, modulator binding sites or other regulatory elements, is therefore missing for the approximately 100 N-terminal residues including the transmembrane region of FICD. Expressing and purifying the required quantity and quality of membrane proteins is demanding because of the low yields and poor stability often observed. Here, we produce full-length FICD by combining a Saccharomyces cerevisiae-based platform with green fluorescent protein (GFP) tagging to optimise the conditions for expression, solubilisation and purification. We subsequently employ these conditions to purify milligram quantities of His-tagged FICD per litre of culture, and show that the purified, detergent-solubilised membrane protein is an active deAMPylating enzyme. Our work provides a straightforward methodology for producing not only full-length FICD, but also other membrane proteins in S. cerevisiae for structural and biochemical characterisation.

One-Step In Vivo Assembly of Multiple DNA Fragments and Genomic Integration in Komagataella phaffii

The methylotrophic yeast species Komagataella phaffii (synonym: Pichia pastoris) is widely used as a host for recombinant protein production. Although several genetic engineering techniques are being employed on K. phaffii, advanced methods such as in vivo DNA assembly in this yeast species are required for synthetic biology applications. In this study, we established a technique for accomplishing one-step in vivo assembly of multiple DNA fragments and genomic integration in K. phaffii. To concurrently achieve an accurate multiple DNA assembly and a high-efficient integration into the target genomic locus in vivo, a K. phaffii strain, lacking a non-homologous end joining-related protein, DNA ligase IV (Dnl4p), that has been reported to improve gene targeting efficiency by homologous recombination, was used. Using green fluorescent protein along with the lycopene biosynthesis, we showed that our method that included a Dnl4p-defective strain permits direct and easy engineering of K. phaffii strains.

A genetic approach to identify amino acids in Gcn1 required for Gcn2 activation

The protein kinase Gcn2 is present in virtually all eukaryotic cells. It is best known for its role in helping cells cope with amino acid starvation. Under starvation, Gcn2 phosphorylates the α subunit of the eukaryotic translation initiation factor 2 (eIF2α), to stimulate a signal transduction pathway that allows cells to cope and overcome starvation. Gcn2 has been implicated in many additional biological functions. It appears that for all functions, Gcn2 must directly bind to its effector protein Gcn1, mediated via a region in Gcn1 called the RWD binding domain (RWDBD). Arg-2259 in this region is important for Gcn2 binding. Overexpression of a Gcn1 fragment only encompassing the RWDBD binds Gcn2, thereby disrupting endogenous Gcn1-Gcn2 interaction which dampens Gcn2 activation. Consequently, cells are unable to increase eIF2α phosphorylation under starvation conditions, visible by impaired growth. This dominant negative phenotype is reverted by the R2259A substitution, again allowing Gcn1-Gcn2 interaction and enhanced eIF2α phosphorylation. We have found that the amino acid substitutions, R2289A, R2297A, and K2301A, also reverted the dominant negative phenotype as well as allowed enhanced eIF2α phosphorylation, as found previously for the R2259A substitution. This suggests that the respective amino acids are relevant for the overexpressed RWDBD to disrupt Gcn1-Gcn2 interaction and impair Gcn2 activation, supporting the idea that in Gcn1 these amino acids mediate Gcn2-binding. Our findings suggest that two helices in Gcn1 constitute a Gcn2 binding site. We serendipitously found amino acid substitutions that enhanced the dominant negative phenotype that correlated with a further reduction in eIF2α-P levels, suggesting that the respective RWDBD variants are more potent in disrupting Gcn1-Gcn2 interaction.

Efficient Method to Identify Synthetic Riboswitches Using RNA-Based Capture-SELEX Combined with In Vivo Screening

Synthetic riboswitches are a promising tool for conditional gene expression. In vitro selected aptamers used as binding domains for the design of RNA-based switches have to exhibit excellent binding affinity as well as ligand binding-induced structural changes. Selection via Capture-SELEX favors the enrichment of aptamers which exhibit both characteristics. For the Capture-SELEX, an RNA pool is used that gets immobilized onto a capture oligonucleotide by hybridization. Addition of the ligand frees the aptamers by their binding to the ligand, resulting in the release from the capture oligonucleotide through structural changes. These sequences get reverse transcribed, PCR amplified, and used for the following selection rounds. In this publication, we present a detailed protocol for Capture-SELEX, followed by screening in yeast to identify aptamers suitable for the design of synthetic riboswitches.

NanoLuc luciferase as a quantitative yeast two-hybrid reporter

The yeast two-hybrid (Y2H) assay is a powerful technique to identify protein-protein interactions. However, the auxotrophic markers that are the most common Y2H reporters take several days to yield data and require subjective assessment of semiquantitative data to identify interactions. Several reporters have been developed to overcome these disadvantages, but there is still a need for a Y2H reporter that is objective, fast and able to be performed with common laboratory equipment. In this report, we replaced the ADE2 reporter in BK100 with NanoLuc luciferase to yield BK100Nano. We developed an optimized assay to measure NanoLuc activity in 96-well plates and analyzed a set of 74 pairs identified in Y2H library screens, which revealed 44 positive interactions using an unbiased cutoff based on the mean luminescence of negative control samples. The same set was also tested for growth on Y2H selection medium via expression of the HIS3 reporter. We found 91% agreement between the two assays, with discrepancies attributed to weak interactions that displayed variable growth on Y2H medium. Overall, the new BK100Nano strain establishes a quantitative and convenient method to identify Y2H interactions and has potential to be applied to a high throughput manner.

Optogenetic strategies for the control of gene expression in yeasts

Optogenetics involves the use of light to control cellular functions and has become increasingly popular in various areas of research, especially in the precise control of gene expression. While this technology is already well established in neurobiology and basic research, its use in bioprocess development is still emerging. Some optogenetic switches have been implemented in yeasts for different purposes, taking advantage of a wide repertoire of biological parts and relatively easy genetic manipulation. In this review, we cover the current strategies used for the construction of yeast strains to be used in optogenetically controlled protein or metabolite production, as well as the operational aspects to be considered for the scale-up of this type of process. Finally, we discuss the main applications of optogenetic switches in yeast systems and highlight the main advantages and challenges of bioprocess development considering future directions for this field.

Functional characterization of a highly specific L-arabinose transporter from Trichoderma reesei

Background

Lignocellulose biomass has been investigated as a feedstock for second generation biofuels and other value-added products. Some of the processes for biofuel production utilize cellulases and hemicellulases to convert the lignocellulosic biomass into a range of soluble sugars before fermentation with microorganisms such as yeast Saccharomyces cerevisiae. One of these sugars is l-arabinose, which cannot be utilized naturally by yeast. The first step in l-arabinose catabolism is its transport into the cells, and yeast lacks a specific transporter, which could perform this task.

Results

We identified Trire2_104072 of Trichoderma reesei as a potential l-arabinose transporter based on its expression profile. This transporter was described already in 2007 as d-xylose transporter XLT1. Electrophysiology experiments with Xenopus laevis oocytes and heterologous expression in yeast revealed that Trire2_104072 is a high-affinity l-arabinose symporter with a K_m value in the range of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim$$\end{document}∼ 0.1–0.2 mM. It can also transport d-xylose but with low affinity (K_m\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim$$\end{document}∼ 9 mM). In yeast, l-arabinose transport was inhibited slightly by d-xylose but not by d-glucose in an assay with fivefold excess of the inhibiting sugar. Comparison with known l-arabinose transporters revealed that the expression of Trire2_104072 enabled yeast to uptake l-arabinose at the highest rate in conditions with low extracellular l-arabinose concentration. Despite the high specificity of Trire2_104072 for l-arabinose, the growth of its T. reesei deletion mutant was only affected at low l-arabinose concentrations.

Conclusions

Due to its high affinity for l-arabinose and low inhibition by d-glucose or d-xylose, Trire2_104072 could serve as a good candidate for improving the existing pentose-utilizing yeast strains. The discovery of a highly specific l-arabinose transporter also adds to our knowledge of the primary metabolism of T. reesei. The phenotype of the deletion strain suggests the involvement of other transporters in l-arabinose transport in this species.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01666-4.

Recent Advances in Strategies for the Cloning of Natural Product Biosynthetic Gene Clusters

Microbial natural products (NPs) are a major source of pharmacological agents. Most NPs are synthesized from specific biosynthetic gene clusters (BGCs). With the rapid increase of sequenced microbial genomes, large numbers of NP BGCs have been discovered, regarded as a treasure trove of novel bioactive compounds. However, many NP BGCs are silent in native hosts under laboratory conditions. In order to explore their therapeutic potential, a main route is to activate these silent NP BGCs in heterologous hosts. To this end, the first step is to accurately and efficiently capture these BGCs. In the past decades, a large number of effective technologies for cloning NP BGCs have been established, which has greatly promoted drug discovery research. Herein, we describe recent advances in strategies for BGC cloning, with a focus on the preparation of high-molecular-weight DNA fragment, selection and optimization of vectors used for carrying large-size DNA, and methods for assembling targeted DNA fragment and appropriate vector. The future direction into novel, universal, and high-efficiency methods for cloning NP BGCs is also prospected.

Legionella pneumophila LegC7 effector protein drives aberrant endoplasmic reticulum:endosome contacts in yeast

Legionella pneumophila is a facultative intracellular bacterial pathogen, causing the severe form of pneumonia known as Legionnaires' disease. Legionella actively alters host organelle trafficking through the activities of "effector" proteins secreted via a type-IVB secretion system, in order to construct the bacteria-laden Legionella-containing vacuole (LCV) and prevent lysosomal degradation. The LCV is created with membrane derived from host endoplasmic reticulum (ER), secretory vesicles and phagosomes, although the precise molecular mechanisms that drive its synthesis remain poorly understood. In an effort to characterize the in vivo activity of the LegC7/YlfA SNARE-like effector protein from Legionella in the context of eukaryotic membrane trafficking in yeast, we find that LegC7 interacts with the Emp46p/Emp47p ER-to-Golgi glycoprotein cargo adapter complex, alters ER morphology and induces aberrant ER:endosome interactions, as measured by visualization of ER cargo degradation, reconstitution of split-GFP proteins and enhanced oxidation of the ER lumen. LegC7-dependent toxicity, disruption of ER morphology and ER:endosome fusion events were dependent upon endosomal VPS class C tethering complexes and the endosomal t-SNARE, Pep12p. This work establishes a model in which LegC7 functions to recruit host ER material to the bacterial phagosome during infection by driving ER:endosome contacts, potentially through interaction with host membrane tethering complexes and/or cargo adapters.

Improvements of the productivity and saccharification efficiency of the cellulolytic β-glucosidase D2-BGL in Pichia pastoris via directed evolution

BACKGROUND

β-Glucosidases are essential for cellulose hydrolysis by catalyzing the final cellulolytic degradation of cello-oligomers and cellobiose to glucose. D2-BGL is a fungal glycoside hydrolase family 3 (GH3) β-glucosidase isolated from Chaetomella raphigera with high substrate affinity, and is an efficient β-glucosidase supplement to Trichoderma reesei cellulase mixtures for the saccharification of lignocellulosic biomass.

RESULTS

We have carried out error-prone PCR to further increase catalytic efficiency of wild-type (WT) D2-BGL. Three mutants, each with substitution of two amino acids on D2-BGL, exhibited increased activity in a preliminary mutant screening in Saccharomyces cerevisiae. Effects of single amino acid replacements on catalysis efficiency and enzyme production have been investigated by subsequent expression in Pichia pastoris. Substitution F256M resulted in enhancing the tolerance to substrate inhibition and specific activity, and substitution D224G resulted in increasing the production of recombinant enzyme. The best D2-BGL mutant generated, Mut M, was constructed by combining beneficial mutations D224G, F256M and Y260D. Expression of Mut M in Pichia pastoris resulted in 2.7-fold higher production of recombinant protein, higher V_max and greater substrate inhibition tolerance towards cellobiose relative to wild-type enzyme. Surprisingly, Mut M overexpression induced the ER unfolded protein response to a level lower than that with WT D2 overexpression in P. pastoris. When combined with the T. reesei cellulase preparation Celluclast 1.5L, Mut M hydrolyzed acid-pretreated sugarcane bagasse more efficiently than WT D2.

CONCLUSIONS

D2-BGL mutant Mut M was generated successfully by following directed evolution approach. Mut M carries three mutations that are not reported in other directed evolution studies of GH3 β-glucosidases, and this mutant exhibited greater tolerance to substrate inhibition and higher V_max than wild-type enzyme. Besides the enhanced specific activity, Mut M also exhibited a higher protein titer than WT D2 when it was overexpressed in P. pastoris. Our study demonstrates that both catalytic efficiency and productivity of a cellulolytic enzyme can be enhanced via protein engineering.

One-step construction of a food-grade expression system based on the URA3 gene in Kluyveromyces lactis

Proteins from food-grade expression systems can be used in food products and medical applications. Herein, we describe a one-step method of constructing an expression vector in Kluyveromyces lactis by combining a URA3-deficient strain and a plasmid vector with no drug-resistant selection. Adjacent DNA elements of the vector were assembled in a targeted manner through a reaction with a special recombinase to form a plasmid vector using a one-step reaction. The unnecessary fragments containing the pUC origin and the ampicillin resistance gene were removed, and the vector was isolated and purified before transformation. A single transformation of the vector can produce a URA3-deficient strain. PCR assay, sequencing, and western blot analysis all indicated that the method of vector construction and target protein expression (mCherry and human serum albumin) were successful. This method may potentially be applied to any species containing the URA3 gene; this system has the potential to become a safe and powerful tool for promoting protein expression in food-safe species.

ATP binding cassette proteins ABCG37 and ABCG33 function as potassium-independent cesium uptake carriers in Arabidopsis roots

Radiocesium accumulated in the soil by nuclear accidents is a major environmental concern. The transport process of cesium (Cs⁺) is tightly linked to the indispensable plant nutrient potassium (K⁺) as they both belong to the group I alkali metals with similar chemical properties. Most of the transporters that had been characterized to date as Cs⁺ transporters are directly or indirectly linked to K⁺. Using a combinatorial approach of physiology, genetics, cell biology, and root uptake assay, here we identified two ATP-binding cassette (ABC) proteins, ABCG37 and ABCG33, as facilitators of Cs⁺ influx. A gain-of-function mutant of ABCG37 (abcg37-1) showed increased sensitivity to Cs⁺-induced root growth inhibition, while the double knockout mutant of ABCG33 and ABCG37 (abcg33-1abcg37-2) showed resistance, whereas the single loss-of-function mutants of ABCG33 and ABCG37 did not show any alteration in Cs⁺ response. In planta short-term radioactive Cs⁺-uptake assay along with growth and uptake assays in a heterologous system confirmed ABCG33 and ABCG37 as Cs⁺-uptake carriers. Potassium response and content were unaffected in the double-mutant background and yeast cells lacking potassium-uptake carriers transformed with ABCG33 and ABCG37 failed to grow in the absence of K⁺, confirming that Cs⁺ uptake by ABCG33 and ABCG37 is independent of K⁺. Collectively, this work identified two ABC proteins as new Cs⁺-influx carriers that act redundantly and independent of the K⁺-uptake pathway.

The pathway of recombining short homologous ends in Escherichia coli revealed by the genetic study

The recombination of short homologous ends in Escherichia coli has been known for 30 years, and it is often used for both site-directed mutagenesis and in vivo cloning. For cloning, a plasmid and target DNA fragments were converted into linear DNA fragments with short homologous ends, which are joined via recombination inside E. coli after transformation. Here this mechanism of joining homologous ends in E. coli was determined by a linearized plasmid with short homologous ends. Two 3'-5' exonucleases ExoIII and ExoX with nonprocessive activity digested linear dsDNA to generate 5' single-strand overhangs, which annealed with each other. The polymerase activity of DNA polymerase I (Pol I) was exclusively employed to fill in the gaps. The strand displacement activity and the 5'-3' exonuclease activity of Pol I were also required, likely to generate 5' phosphate termini for subsequent ligation. Ligase A (LigA) joined the nicks to finish the process. The model involving 5' single-stranded overhangs is different from established recombination pathways that all generate 3' single-stranded overhangs. This recombination is likely common in bacteria since the involved enzymes are ubiquitous.

Engineered dual selection for directed evolution of SpCas9 PAM specificity

The widely used Streptococcus pyogenes Cas9 (SpCas9) nuclease derives its DNA targeting specificity from protein-DNA contacts with protospacer adjacent motif (PAM) sequences, in addition to base-pairing interactions between its guide RNA and target DNA. Previous reports have established that the PAM specificity of SpCas9 can be altered via positive selection procedures for directed evolution or other protein engineering strategies. Here we exploit in vivo directed evolution systems that incorporate simultaneous positive and negative selection to evolve SpCas9 variants with commensurate or improved activity on NAG PAMs relative to wild type and reduced activity on NGG PAMs, particularly YGG PAMs. We also show that the PAM preferences of available evolutionary intermediates effectively determine whether similar counterselection PAMs elicit different selection stringencies, and demonstrate that negative selection can be specifically increased in a yeast selection system through the fusion of compensatory zinc fingers to SpCas9.

Reprogramming the genetic code

The encoded biosynthesis of proteins provides the ultimate paradigm for high-fidelity synthesis of long polymers of defined sequence and composition, but it is limited to polymerizing the canonical amino acids. Recent advances have built on genetic code expansion - which commonly permits the cellular incorporation of one type of non-canonical amino acid into a protein - to enable the encoded incorporation of several distinct non-canonical amino acids. Developments include strategies to read quadruplet codons, use non-natural DNA base pairs, synthesize completely recoded genomes and create orthogonal translational components with reprogrammed specificities. These advances may enable the genetically encoded synthesis of non-canonical biopolymers and provide a platform for transforming the discovery and evolution of new materials and therapeutics.

Genetic Engineering and Synthetic Genomics in Yeast to Understand Life and Boost Biotechnology

The field of genetic engineering was born in 1973 with the “construction of biologically functional bacterial plasmids in vitro”. Since then, a vast number of technologies have been developed allowing large-scale reading and writing of DNA, as well as tools for complex modifications and alterations of the genetic code. Natural genomes can be seen as software version 1.0; synthetic genomics aims to rewrite this software with “build to understand” and “build to apply” philosophies. One of the predominant model organisms is the baker’s yeast Saccharomyces cerevisiae. Its importance ranges from ancient biotechnologies such as baking and brewing, to high-end valuable compound synthesis on industrial scales. This tiny sugar fungus contributed greatly to enabling humankind to reach its current development status. This review discusses recent developments in the field of genetic engineering for budding yeast S. cerevisiae, and its application in biotechnology. The article highlights advances from Sc1.0 to the developments in synthetic genomics paving the way towards Sc2.0. With the synthetic genome of Sc2.0 nearing completion, the article also aims to propose perspectives for potential Sc3.0 and subsequent versions as well as its implications for basic and applied research.

Immune Literacy: Reading, Writing, and Editing Adaptive Immunity

Advances in reading, writing, and editing DNA are providing unprecedented insights into the complexity of immunological systems. This combination of systems and synthetic biology methods is enabling the quantitative and precise understanding of molecular recognition in adaptive immunity, thus providing a framework for reprogramming immune responses for translational medicine. In this review, we will highlight state-of-the-art methods such as immune repertoire sequencing, immunoinformatics, and immunogenomic engineering and their application toward adaptive immunity. We showcase novel and interdisciplinary approaches that have the promise of transforming the design and breadth of molecular and cellular immunotherapies.

Optimised red- and green-fluorescent proteins for live cell imaging in the industrial enzyme-producing fungus Trichoderma reesei

The filamentous fungus Trichoderma reesei is a major source of cellulolytic enzymes in biofuel production. Despite its economic relevance, our understanding of its secretory pathways is fragmentary. A major challenge is to visualise the dynamic behaviour of secretory vesicles in living cells. To this end, we establish a location juxtaposing the succinate dehydrogenase locus as a "soft-landing" site for controlled expression of 4 green-fluorescent and 5 red-fluorescent protein-encoding genes (GFPs, RFPs). Quantitative and comparative analysis of their fluorescent signals in living cells demonstrates that codon-optimised monomeric superfolder GFP (TrmsGFP) and codon-optimised mCherry (TrmCherry) combine highest signal intensity with significantly improved signal-to-noise ratios. Finally, we show that integration of plasmid near the sdi1 locus does not affect secretion of cellulase activity in RUT-C30. The molecular and live cell imaging tools generated in this study will help our understanding the secretory pathway in the industrial fungus T. reesei.

A Quantitative Tri-fluorescent Yeast Two-hybrid System: From Flow Cytometry to In cellula Affinities

We present a technological advancement for the estimation of the affinities of Protein-Protein Interactions (PPIs) in living cells. A novel set of vectors is introduced that enables a quantitative yeast two-hybrid system based on fluorescent fusion proteins. The vectors allow simultaneous quantification of the reaction partners (Bait and Prey) and the reporter at the single-cell level by flow cytometry. We validate the applicability of this system on a small but diverse set of PPIs (eleven protein families from six organisms) with different affinities; the dissociation constants range from 117 pm to 17 μm After only two hours of reaction, expression of the reporter can be detected even for the weakest PPI. Through a simple gating analysis, it is possible to select only cells with identical expression levels of the reaction partners. As a result of this standardization of expression levels, the mean reporter levels directly reflect the affinities of the studied PPIs. With a set of PPIs with known affinities, it is straightforward to construct an affinity ladder that permits rapid classification of PPIs with thus far unknown affinities. Conventional software can be used for this analysis. To permit automated analysis, we provide a graphical user interface for the Python-based FlowCytometryTools package.

Selecting for Altered Substrate Specificity Reveals the Evolutionary Flexibility of ATP-Binding Cassette Transporters

ATP-binding cassette (ABC) transporters are the largest family of ATP-hydrolyzing transporters, which import or export substrates across membranes, and have members in every sequenced genome. Structural studies and biochemistry highlight the contrast between the global structural similarity of homologous transporters and the enormous diversity of their substrates. How do ABC transporters evolve to carry such diverse molecules and what variations in their amino acid sequence alter their substrate selectivity? We mutagenized the transmembrane domains of a conserved fungal ABC transporter that exports a mating pheromone and selected for mutants that export a non-cognate pheromone. Mutations that alter export selectivity cover a region that is larger than expected for a localized substrate-binding site. Individual selected clones have multiple mutations, which have broadly additive contributions to specific transport activity. Our results suggest that multiple positions influence substrate selectivity, leading to alternative evolutionary paths toward selectivity for particular substrates and explaining the number and diversity of ABC transporters.

Srikant et al. find that mutations at many different positions in an ABC transporter of fungal mating pheromone have roughly additive effects on substrate recognition. This helps explain the evolvability of ABC transporters to transport a remarkable variety of substrates and their presence as the largest protein family across all domains of life.

Genomic integration of unclonable gene expression cassettes in Saccharomyces cerevisiae using rapid cloning-free workflows

Most DNA assembly methods require bacterial amplification steps, which restrict its application to genes that can be cloned in the bacterial host without significant toxic effects. However, genes that cannot be cloned in bacteria do not necessarily exert toxic effects on the final host. In order to tackle this issue, we adapted two DNA assembly workflows for rapid, cloning-free construction and genomic integration of expression cassettes in Saccharomyces cerevisiae. One method is based on a modified Gibson assembly, while the other relies on a direct assembly and integration of linear PCR products by yeast homologous recombination. The methods require few simple experimental steps, and their performance was evaluated for the assembly and integration of unclonable zeaxanthin epoxidase expression cassettes in yeast. Results showed that up to 95% integration efficiency can be reached with minimal experimental effort. The presented workflows can be employed as rapid gene integration tools for yeast, especially tailored for integrating unclonable genes.

Studies on sugar transporter CRT1 reveal new characteristics that are critical for cellulase induction in Trichoderma reesei

BACKGROUND

Trichoderma reesei is an ascomycete fungus that has a tremendous capability of secreting extracellular proteins, mostly lignocellulose-degrading enzymes. Although many aspects of the biology of this organism have been unfolded, the roles of the many sugar transporters coded in its genome are still a mystery with a few exceptions. One of the most interesting sugar transporters that has thus far been discovered is the cellulose response transporter 1 (CRT1), which has been suggested to be either a sugar transporter or a sensor due to its seemingly important role in cellulase induction.

RESULTS

Here we show that CRT1 is a high-affinity cellobiose transporter, whose function can be complemented by the expression of other known cellobiose transporters. Expression of two sequence variants of the crt1 gene in Saccharomyces cerevisiae revealed that only the variant listed in the RUT-C30 genome annotation has the capability to transport cellobiose and lactose. When expressed in the Δ crt1 strain, the variant listed in the QM6a genome annotation offers partial complementation of the cellulase induction, while the expression of the RUT-C30 variant or cellobiose transporters from two other fungal species fully restore the cellulase induction.

CONCLUSIONS

These results add to our knowledge about the fungal metabolism of cellulose-derived oligosaccharides, which have the capability of inducing the cellulase production in many species. They also help us to deepen our understanding of the T. reesei lactose metabolism, which can have important consequences as this sugar is used as the inducer of protein secretion in many industrial processes which employ this species.

Optogenetic Repressors of Gene Expression in Yeasts Using Light-Controlled Nuclear Localization

INTRODUCTION

Controlling gene expression is a fundamental goal of basic and synthetic biology because it allows insight into cellular function and control of cellular activity. We explored the possibility of generating an optogenetic repressor of gene expression in the model organism Saccharomyces cerevisiae by using light to control the nuclear localization of nuclease-dead Cas9, dCas9.

METHODS

The dCas9 protein acts as a repressor for a gene of interest when localized to the nucleus in the presence of an appropriate guide RNA (sgRNA). We engineered dCas9, the mammalian transcriptional repressor Mxi1, and an optogenetic tool to control nuclear localization (LINuS) as parts in an existing yeast optogenetic toolkit. This allowed expression cassettes containing novel dCas9 repressor configurations and guide RNAs to be rapidly constructed and integrated into yeast.

RESULTS

Our library of repressors displays a range of basal repression without the need for inducers or promoter modification. Populations of cells containing these repressors can be combined to generate a heterogeneous population of yeast with a 100-fold expression range. We find that repression can be dialed modestly in a light dose- and intensity-dependent manner. We used this library to repress expression of the lanosterol 14-alpha-demethylase Erg11, generating yeast with a range of sensitivity to the important antifungal drug fluconazole.

CONCLUSIONS

This toolkit will be useful for spatiotemporal perturbation of gene expression in Saccharomyces cerevisiae. Additionally, we believe that the simplicity of our scheme will allow these repressors to be easily modified to control gene expression in medically relevant fungi, such as pathogenic yeasts.

The induction of HAD-like phosphatases by multiple signaling pathways confers resistance to the metabolic inhibitor 2-deoxyglucose

Anti-cancer strategies that target the glycolytic metabolism of tumors have been proposed. The glucose analog 2-deoxyglucose (2DG) is imported into cells and, after phosphorylation, becomes 2DG-6-phosphate, a toxic by-product that inhibits glycolysis. Using yeast as a model, we performed an unbiased mass spectrometry-based approach to probe the cellular effects of 2DG on the proteome and study resistance mechanisms to 2DG. We found that two phosphatases that target 2DG-6-phosphate were induced upon exposure to 2DG and participated in 2DG detoxification. Dog1 and Dog2 are HAD (haloacid dehalogenase)-like phosphatases, which are evolutionarily conserved. 2DG induced Dog2 by activating several signaling pathways, such as the stress response pathway mediated by the p38 MAPK ortholog Hog1, the unfolded protein response (UPR) triggered by 2DG-induced ER stress, and the cell wall integrity (CWI) pathway mediated by the MAPK Slt2. Loss of the UPR or CWI pathways led to 2DG hypersensitivity. In contrast, mutants impaired in the glucose-mediated repression of genes were 2DG resistant because glucose availability transcriptionally repressed DOG2 by inhibiting signaling mediated by the AMPK ortholog Snf1. The characterization and genome resequencing of spontaneous 2DG-resistant mutants revealed that DOG2 overexpression was a common strategy underlying 2DG resistance. The human Dog2 homolog HDHD1 displayed phosphatase activity toward 2DG-6-phosphate in vitro and its overexpression conferred 2DG resistance in HeLa cells, suggesting that this 2DG phosphatase could interfere with 2DG-based chemotherapies. These results show that HAD-like phosphatases are evolutionarily conserved regulators of 2DG resistance.