Multiresidue analytical methods for the ultra-trace quantification of 33 priority substances present in the list of REACH in real water samples

An integrated One Health framework for holistic evaluation of risks from antifungal agents in a large-scale multi-city study

A new framework for retrospective mass spectral data mining for antifungal agents (AFs) and Wastewater-Based Epidemiology (WBE) was developed as part of One Health framework to tackle risks from AFs. A large scale, multi-city study was undertaken in South-West England. Key drivers of AFs in the catchment were identified with communal wastewater discharges being the main driver for human AFs (fluconazole, ketoconazole) and agricultural runoff being the main driver for pesticide AFs (prochloraz, prothioconazole and tebuconazole). Average WBE-estimated human used fluconazole and ketoconazole PNDIs (population normalised daily intake) exceeded 300 mg day-1 1000 inh-1 and 2000 mg day-1 1000 inh-1. This is much higher than PNDPs (population normalised daily prescriptions <40 mg day-1 1000 inh-1 and <80 mg day-1 1000 inh-1 for fluconazole and ketoconazole respectively). This was expected due to both prescription and over-the-counter usage, and both oral and topical applications. Pesticide AF, prothioconazole had PNDIs <40,000 mg day-1 1000 inh -1, which gave intake: 0.43, 0.26, 0.07 mg kg-1 in City A, B, and C, likely due to accounting for external/non-human sources. This is higher than the acceptable daily intake (ADI) of 0.01 mg kg-1bw day-1, which warrants further study. Intake per kg of body weight estimated using tebuconazole was 0.86, 1.39, 0.12, 0.13, and 2.7 mg kg-1 in City A-E respectively and is likely due to external/non-human sources. Intake calculated using its metabolite was 0.02 and 0.01 mg kg-1 in City B and C respectively, which aligned with ADI (0.03 mg kg-1bw day-1). The environmental risk assessment of AFs indicated low/medium risk from fluconazole, prochloraz, and tebuconazole, medium risk from epoxiconazole, prothioconazole's metabolite, and tebuconazole, and high risk for prothioconazole in river water. High risk was estimated from fluconazole, epoxiconazole, prothioconazole and its metabolite, tebuconazole, ketoconazole in wastewater samples, which is important during raw sewage discharge events via sewer overflows.

Pollutants in aquatic system: a frontier perspective of emerging threat and strategies to solve the crisis for safe drinking water

Water is an indispensable natural resource and is the most vital substance for the existence of life on earth. However, due to anthropogenic activities, it is being polluted at an alarming rate which has led to serious concern about water shortage across the world. Moreover, toxic contaminants released into water bodies from various industrial and domestic activities negatively affect aquatic and terrestrial organisms and cause serious diseases such as cancer, renal problems, gastroenteritis, diarrhea, and nausea in humans. Therefore, water treatments that can eliminate toxins are very crucial. Unfortunately, pollution treatment remains a difficulty when four broad considerations are taken into account: effectiveness, reusability, environmental friendliness, and affordability. In this situation, protecting water from contamination or creating affordable remedial techniques has become a serious issue. Although traditional wastewater treatment technologies have existed since antiquity, they are both expensive and inefficient. Nowadays, advanced sustainable technical approaches are being created to replace traditional wastewater treatment processes. The present study reviews the sources, toxicity, and possible remediation techniques of the water contaminants.

Triazole fungicide tebuconazole induces apoptosis through ROS-mediated endoplasmic reticulum stress pathway

Tebuconazole (TEB) is a common triazole fungicide that has been widely applied in the treatment of fungal diseases. It is reported that TEB could exert harmful effects on mammals' health. However, the molecular mechanism involved in TEB toxicity remain undefined. Our study aimed to investigate the mechanisms of TEB-induced toxicity in intestinal cells. We found that TEB stimulates apoptosis through the mitochondrial pathway. Additionally, TEB triggers endoplasmic reticulum (ER) stress as demonstrated by the activation of the three arms of unfolded protein response (UPR). The incubation with the chemical chaperone 4-phenylbutyrate (4-PBA) alleviated ER stress and reduced TEB-induced apoptosis, suggesting that ER stress plays an important role in mediating TEB-induced toxicity. Furthermore, inhibition of ROS by N-acetylcysteine (NAC) inhibited TEB-induced ER stress and apoptosis. Taken together, these findings suggest that TEB exerts its toxic effects in HCT116 cells by inducing apoptosis through ROS-mediated ER stress and mitochondrial apoptotic pathway.

Oxidative stress, DNA damage and apoptosis induced by tebuconazole in the kidney of male Wistar rat

Tebuconazole (TEB) is a broad-spectrum conazole fungicide that has been used in agriculture in the control of foliar and soil-borne diseases of many crops. The present study has investigated the adverse effects of subchronic exposure to TEB on the kidney of male rats. Animals were divided into four equal groups and treated with TEB at increasing doses 0.9, 9 and 27 mg/kg body weight for 28 consecutive days. The results showed that TEB induced oxidative stress in the kidney demonstrated by an increase in malondialdehyde (MDA), protein carbonyl (PC), advanced oxidation protein product (AOPP) levels and DNA damage, as compared to the controls. Furthermore, superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx) activities were increased in the renal tissue of treated rats. Moreover, significant decrease in reduced glutathione (GSH) content in TEB-treated rats was observed, while oxidized glutathione (GSSG) levels were increased, thus a marked fall in GSH/GSSG ratio was registered in the kidney. Glutathione reductase (GR) activity showed a significant increase after TEB exposure. Moreover, TEB down-regulated the expression of Bcl2 and up-regulated the expression of Bax and caspase 3, which triggered apoptosis via the Bax/Bcl2 and caspase pathway. Also, TEB administration resulted in altered biochemical indicators of renal function and varying lesions in the overall histo-architecture of renal tissues. Taken together, our findings brought into light the renal toxicity induced by TEB, which was found to be significant at low doses.

Impact of seasonality, redox conditions, travel distances and initial concentrations on micropollutant removal during riverbank filtration at four sites

Riverbank filtration (RBF) is a reliable water purification technique that has proven to be suitable for the removal of organic micropollutants. Its removal efficiency and dependency on a variety of factors such as redox conditions, temperatures, geology, travel times, level of initial micropollutant concentrations and seasonality were investigated during three seasonal sampling campaigns. Two anoxic (silty sand, Ems river) and two oxic (gravel, Ruhr river) RBF sites in Germany with different travel distances (42-633 m) were studied. Micropollutant concentrations were examined using a large-volume direct injection liquid chromatography method coupled to high-resolution mass spectrometry. Seasonal differences in micropollutant concentrations in the rivers were observed for chlorotolurone, diclofenac, terbuthylazine, mecoprop-P, MCPA (2-methyl-4-chlorophenoxyacetic acid) and propyphenazone. Redox dependencies in RBF were only found for sulfamethoxazole, propyphenazone, terbuthylazine and carbamazepine. Data for oxazepam, tramadol, N-desmethyl-tramadol, tilidin-desmethyl, carbamazepine and carbendazim indicate a required minimum travel distance of e.g. 100-200 m for the complete removal. Notably, travel time did not seem to be a substantial factor for their removal. High conductivity aquifers are also well suited for micropollutant removal. Seasonal initial concentration level variations showed no impact on the resulting abstraction well concentrations. Although the calculated removal efficiencies varied, they proved to be improper for seasonal raw water quality comparison. Knowledge of micropollutant behavior in riverbank filtration was broadened and RBF proved to be well suited for effective micropollutant reduction throughout the year, yet for a complete removal long travel distances or further technical purification steps are required.

Transgenerational reproductive and developmental toxicity of tebuconazole in Caenorhabditis elegans

The transgenerational reproductive and developmental toxicity of tebuconazole (TEB) in Caenorhabditis elegans was investigated over five generations (P0 - F4). Only parental C.elegans (P0) were exposed to TEB (0, 0.01, 0.1, 1, and 10 μg/L) for 24 h and the subsequent offspring (F1-F4) were grown under TEB-free conditions. TEB exposure caused dose-dependent reproductive defects and developmental impairments in C.elegans. In the P0 generation reproductive defects were observed such as: reduced brood size and embryo hatchability, prolonged generation time, retarded gonadal development, and slower germline proliferation, even at 0.01 μg/L, together with developmental toxicity with significant reduced body length and narrowed body width at 10 μg/L. Additionally, the brood size significantly reduced in F2, which began to recover from F3, but was still lower than the control in F4. The proportion of abnormalities increased significantly in F2 and reduced from F3, but was still higher than the control, suggesting that TEB could have cumulative potential and be passed to offspring through parental exposure. Furthermore, exposure to TEB (10 μg/L) in P0 significantly reduced the body length in F1, which began to recover from F2, and was the same level as the control in F4. There was a concentration-dependent increase in body width in F1-F4, with a significant increase only observed in F1 at 10 μg/L. Thus, parental exposure to TEB induced transgenerational defects in both reproduction and development, emphasizing the significance of considering bio-toxicity over multiple generations to conduct accurate assessment of environmental risks of toxicants.

Drinking water contaminants from epoxy resin-coated pipes: A field study

Rehabilitation of aged drinking water pipes is an extensive renovation and increasingly topical in many European cities. Spray-on-lining of drinking water pipes is an alternative cost-effective rehabilitation technology in which the insides of pipes are relined with organic polymer. A commonly used polymer is epoxy resin consisting of monomer bisphenol A (BPA). Leaching of BPA from epoxy lining to drinking water has been a concern among public and authorities. Currently epoxy lining is not recommended in some countries. BPA leaching has been demonstrated in laboratory studies but the behavior and ageing process of epoxy lining in situ is not well known. In this study 6 locations with different age epoxy linings of drinking water pipes done using two distinct technologies were studied. While bisphenol F, 4-n-nonylphenol, and 4-t-octylphenol were rarely found and in trace concentrations, BPA was detected in majority of samples. Pipes lined with the older technology (LSE) leached more BPA than those with more recent technology (DonPro): maxima in cold water were 0.25 μg/L and 10 ng/L, respectively. Incubation of water in pipes 8-10 h prior to sampling increased BPA concentration in cold water 1.1-43-fold. Hot water temperature caused even more BPA leaching - at maximum 23.5 μg/L. The influence of ageing of epoxy lining on BPA leaching on could be shown in case of LSE technology: locations with 8-9 years old lining leached 4-20-fold more BPA compared to a location with 2-year-old lining. Analysis of metals showed that epoxy lining can reduce especially iron concentration in water. No significant burden to water could be shown by the analyzed 72 volatile organic compounds, including epichlorhydrin, precursor used in epoxy resin. Estrogenicity was detected in water samples with the highest BPA loads. Comparable responses of two yeast bioreporters (estrogen receptor α and BPA-targeted) indicated that bisphenol-like compounds were the main cause of estrogenicity. Compared to the estimated average daily BPA exposure, additional BPA load via cold drinking water in the studied locations was low, maximum 8.7%. However, hot water should also be considered as exposure source due to higher BPA concentrations. Epoxy lined locations should be monitored in future in order to evaluate ageing process and control increasing leaching of potentially harmful chemicals.

Assessment of chronic effects of tebuconazole on survival, reproduction and growth of Daphnia magna after different exposure times

The effect of the fungicide tebuconazole (0.41, 0.52, 0.71 and 1.14mg/L) on survival, reproduction and growth of Daphnia magna organisms was monitored using 14 and 21 days exposure tests. A third experiment was performed by exposing D. magna to the fungicide for 14 days followed by 7 days of recovery (14+7). In order to test fungicide effects on D. magna, parameters as survival, mean whole body length, mean total number of neonates per female, mean number of broods per female, mean brood size per female, time to first brood/reproduction and intrinsic rate of natural increase (r) were used. Reproduction was seriously affected by tebuconazole. All tebuconazole concentrations tested affected the number of broods per female and day to first brood. At 14-days test, number of neonates per female and body size decreased by concentrations of tebuconazole higher than 0.52mg/L, whereas at 21-days test both parameters were affected at all the concentrations tested. Survival of the daphnids after 14 days fungicide exposure did not exhibited differences among experimental and control groups. In this experiment r value was reduced (in a 22%) when animals were exposed to concentrations of 0.71mg/L and 1.14mg/L. Survival of daphnids exposed during 21 days to 1.14mg/L declined, and the intrinsic rate of natural increase (r) decreased in a 30 % for tebuconazole concentrations higher than 0.41mg/L. Longevity of daphnids pre-exposed to tebuconazole for 14 days and 7 days in clean water did not show differences from control values and all of them survived the 21 days of the test. However, after 7 days in fungicide free medium animals were unable to restore control values for reproductive parameters and length. The maximum acceptable toxicant concentration (MATC) was calculated using the r values as parameter of evaluation. MATC estimations were 0.61mg/L and 0.46mg/L for 14 and 21 days, respectively. Results showed that the number of neonates per female was the highest sensitive parameter to the effects of tebuconazole on D. magna. On the other hand, a recovery period of 7 days in a free toxicant medium would not be longer enough to reestablish normal reproduction parameters in pre-exposed tebuconazole daphnids.

Extraction of organophosphorus pesticides by carbon-coated Fe3 O4 nanoparticles through response surface experimental design

In this paper, carbon-coated Fe3 O4 nanoparticles were successfully synthesized and used as a magnetic solid-phase extraction absorbent for the preconcentration and extraction of organophosphorus pesticides in environmental water samples. The carbon-coated Fe3 O4 nanoparticles were characterized by transmission electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The determination of organophosphorus pesticides in water samples with carbon-coated Fe3 O4 nanoparticles was investigated by high-performance liquid chromatography with a diode array detector. Furthermore, the response surface model based on the central composite design was applied to quantitatively investigate the effect of some important variables influencing the extraction efficiency, such as pH, treatment time, amount of nanoparticle sorbents, and amount of salt and to find the optimized conditions providing the highest extraction efficiency. Under optimized conditions, the calibration curve was linear in the range of 0.5-15.0 ng/mL with a regression coefficient of 0.9948, 0.9958, and 0.9931 for fenitrothion, diazinon, and ethion, respectively. The obtained results showed that this analytical method would be useful for the analysis of fenitrothion, diazinon, and ethion in tap water with high precision and accuracy.

Global Assessment of Bisphenol A in the Environment: Review and Analysis of Its Occurrence and Bioaccumulation

Because bisphenol A (BPA) is a high production volume chemical, we examined over 500 peer-reviewed studies to understand its global distribution in effluent discharges, surface waters, sewage sludge, biosolids, sediments, soils, air, wildlife, and humans. Bisphenol A was largely reported from urban ecosystems in Asia, Europe, and North America; unfortunately, information was lacking from large geographic areas, megacities, and developing countries. When sufficient data were available, probabilistic hazard assessments were performed to understand global environmental quality concerns. Exceedances of Canadian Predicted No Effect Concentrations for aquatic life were >50% for effluents in Asia, Europe, and North America but as high as 80% for surface water reports from Asia. Similarly, maximum concentrations of BPA in sediments from Asia were higher than Europe. Concentrations of BPA in wildlife, mostly for fish, ranged from 0.2 to 13 000 ng/g. We observed 60% and 40% exceedences of median levels by the US Centers for Disease Control and Prevention's National Health and Nutrition Examination Survey in Europe and Asia, respectively. These findings highlight the utility of coordinating global sensing of environmental contaminants efforts through integration of environmental monitoring and specimen banking to identify regions for implementation of more robust environmental assessment and management programs.

Long-term relationships among pesticide applications, mobility, and soil erosion in a vineyard watershed

Agricultural pesticide use has increased worldwide during the last several decades, but the long-term fate, storage, and transfer dynamics of pesticides in a changing environment are poorly understood. Many pesticides have been progressively banned, but in numerous cases, these molecules are stable and may persist in soils, sediments, and ice. Many studies have addressed the question of their possible remobilization as a result of global change. In this article, we present a retro-observation approach based on lake sediment records to monitor micropollutants and to evaluate the long-term succession and diffuse transfer of herbicides, fungicides, and insecticide treatments in a vineyard catchment in France. The sediment allows for a reliable reconstruction of past pesticide use through time, validated by the historical introduction, use, and banning of these organic and inorganic pesticides in local vineyards. Our results also revealed how changes in these practices affect storage conditions and, consequently, the pesticides' transfer dynamics. For example, the use of postemergence herbicides (glyphosate), which induce an increase in soil erosion, led to a release of a banned remnant pesticide (dichlorodiphenyltrichloroethane, DDT), which had been previously stored in vineyard soil, back into the environment. Management strategies of ecotoxicological risk would be well served by recognition of the diversity of compounds stored in various environmental sinks, such as agriculture soil, and their capability to become sources when environmental conditions change.

Survey regarding the occurrence of selected organic micropollutants in the groundwaters of overseas departments

To collect a complete dataset regarding the occurrence of organic substances in groundwater, this study presents the examination of 66 organic contaminants in the groundwater of overseas departments, including pesticides, pharmaceutical compounds, hormones and some industrial substances. The selective and sensitive analytical methods are described. These techniques begin with solid-phase extraction (SPE) followed by analysis using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and gas chromatography-mass spectrometry (GC-ToF-MS). The paper summarises the analytical results from 40 sampling points collected during two campaigns in Guadeloupe, Martinique, Reunion, Mayotte and Guiana, representing 80 samples. Of the 66 target substances, 36 were determined at least once. Among the most frequently detected are bisphenol A (frequency, 96%; max., 7,400 ng/L), caffeine (frequency, 91%; max., 1,240 ng/L), pentachlorophenol (frequency, 55%; max., 418 ng/L), and carbamazepine (frequency, 56%; max., 22 ng/L). The results do not put in evidence that the origin of the sample or climatic characteristics of these regions influence the dilution and release of micropollutants.

Four-year advanced monitoring program of polar pesticides in groundwater of Catalonia (NE-Spain)

Pesticide contamination of groundwater is of paramount importance because it is the most sensitive and the largest body of freshwater in the European Union. In this paper, an isotopic dilution method based on on-line solid phase extraction-liquid chromatography (electrospray)-tandem mass spectrometry (SPE-LC(ESI)-MS/MS) was used for the analysis of 22 pesticides in groundwater. Results were evaluated from monitoring 112 wells and piezometers coming from 29 different aquifers located in 18 ground water bodies (GWBs), from Catalonia, Spain, for 4 years as part of the surveillance and operational monitoring programs conducted by the Catalan Water Agency. The analytical method developed allows the determination of the target pesticides (6 triazines, 4 phenylureas, 4 organophosphorous, 1 anilide, 2 chloroacetanilides, 1 thiocarbamate, and 4 acid herbicides) in groundwater with good sensitivity (limits of detection <5 ng/L), accuracy (relative recoveries between 85 and 116%, except for molinate), and repeatability (RSD<23%), and in a fully automated way. The most ubiquitous compounds were simazine, atrazine, desethylatrazine and diuron. Direct relation between frequency of detection of each target compound and Groundwater Ubiquity Score index (GUS index) is observed. Desethylatrazine and deisopropylatrazine, metabolites of atrazine and simazine, respectively, presented the highest mean concentrations. Compounds detected in less than 5% of the samples were cyanazine, molinate, fenitrothion and mecoprop. According to the Directive 2006/118/EC, 13 pesticides have individual values above the requested limits (desethylatrazine, atrazine and terbuthylazine lead the list) and 14 samples have total pesticide levels above 500 ng/L. The GWB with the highest levels of total pesticides is located in Lleida (NE-Spain), with 9 samples showing total pesticide levels above 500 ng/L. Several factors such as regulation of the use of pesticides, type of activities in the area, and irrigation were discussed in relation to the observed levels of pesticides.

Determination of pesticide residues and related compounds in water and industrial effluent by solid-phase extraction and gas chromatography coupled to triple quadrupole mass spectrometry

Pollution of drinking water supplies from industrial waste is a result of several industrial processes and disposal practices, and the establishment of analytical methods for monitoring organic compounds related to environmental and health problems is very important. In this work, a method using solid-phase extraction (SPE) and gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS) was developed and validated for the simultaneous determination of pesticide residues and related compounds in drinking and surface water as well as in industrial effluent. Optimization of the method was achieved by using a central composite design approach on parameters such as the sample pH and SPE eluent composition. A single SPE consisting of the loading on a polymeric sorbent of 100 mL of sample adjusted to pH 3 and elution with methanol/methylene chloride (10:90, v/v) permitted the obtaining of acceptable recoveries in most cases. The concentration factor associated with sensitivity of the chromatographic analysis permitted the achievement of the method limit of detection values between 0.01 and 0.25 μg L(-1). Recovery assays presented mean recoveries between 70 and 120% for most of the compounds with very good precision, despite the different chemical nature of the compounds analyzed. The selectivity of the method, evaluated through the relative intensity of quantification and qualification ions obtained by GC-QqQ-MS/MS, was considered adequate. The developed method was finally applied to the determination of target analytes in real samples. River water and treated industrial effluent samples presented residues of some compounds, but no detectable residues were found in the drinking water samples evaluated.

Occurrence of phenols and phenoxyacid herbicides in environmental waters using an imprinted polymer as a selective sorbent

A monitoring program was developed for the environmental analysis of four phenols and three phenoxyacid herbicides in natural surface and ground water samples from the vineyard region of La Rioja (Spain). An analytical method based on molecularly imprinted solid phase extraction was developed for the determination of the impact of these compounds on the quality of environmental water samples. Different parameters were evaluated and optimized to achieve limits of detection in the 20-90 ng L(-1) range for both surface and ground water, with relative standard deviations in the 12-18% range. A comparative study of the behavior of the imprinted polymer compared with traditional sorbents (C18 and Oasis HLB) in the analysis of river water was performed. The results revealed that bisphenol-A is the most ubiquitous compound (present in more than 50% of the samples), with values up to 0.72 μg L(-1). Bisphenol-F was also detected in several samples (33% of the samples), although in concentration lower than Bisphenol-A. The herbicide 2,4-D was frequently detected in water samples (present in 33% of the samples), with concentrations above 0.1 μg L(-1) in two samples.

A sensitive liquid chromatography/tandem mass spectrometry method for the determination of natural and synthetic steroid estrogens in seawater and marine biota, with a focus on proposed Water Framework Directive Environmental Quality Standards

RATIONALE

Trace levels of natural and synthetic steroid estrogens estrone (E1), 17β-estradiol (E2) and 17α-ethynyl estradiol (EE2) have been demonstrated to exert adverse effects in exposed organisms. E2 and EE2 have been proposed for inclusion in the Water Framework Directive (WFD) list of priority pollutants; however, the detection and accurate quantification of these compounds provide significant challenges, due to the low detection limits required.

METHODS

A sensitive method combining ultrasonication, solid-phase extraction (SPE) and liquid chromatography/tandem mass spectrometry, with electrospray ionisation in negative mode (LC/ESI-MS/MS), capable of determining E1, E2 and EE2 at concentrations between 0.07 and 60 ng/L for seawater and between 0.4 and 200 ng/g wet weight in Mytilus spp. is reported. Recoveries at the limit of quantification (LOQ) ranged from 95 to 102% and 88 to 100% for water and tissue, respectively. Salinity (12 to 35‰) and typical marine particulate matter loadings (between 10 and 100 mg/L) were not found to affect analyte recoveries.

RESULTS

The first detection of E1 by LC/MS/MS in Irish marine waters (Dublin Bay, at 0.76 ng/L) is reported. Steroids were not detected in Galway Bay, or in any mussel samples from Dublin, Galway and Clare. The level of E2 detected in the dissolved water phase was below the proposed WFD Environmental Quality Standard (EQS) in other surface waters.

CONCLUSIONS

The proposed method is suitable for the detection of E1, E2 and EE2 at biologically relevant concentrations and, due to the specificity offered, is not subject to potential interferences from endogenous E1 and E2 which often complicate the interpretation of estrogenic biomarker assays.

Application of ozone for the removal of bisphenol A from water and wastewater--a review

The extensive use of Bisphenol A (BPA) in the plastics industry has led to increasing reports of its presence in the aquatic environment, with concentrations of ng L(-1) to μg L(-1). Various advanced oxidation processes, including ozonation, have been shown to effectively degrade BPA. This paper reviews the current advancements in using ozone to remove BPA from water and wastewater. Most of the published work on the oxidation of BPA by ozone has focused on the efficiency of BPA removal in terms of the disappearance of BPA, and the effect of various operational parameters such as ozone feed rate, contact time and pH; some information is available on the estrogenic activity of the treated water. Due to increasing operational reliability and cost effectiveness, there is great potential for industrial scale application of ozone for the treatment of BPA. However, there is a significant lack of information on the formation of oxidation by-products and their toxicities, particularly in more complex matrices such as wastewater, and further investigation is needed for a better understanding of the environmental fate of BPA.

Solid phase extraction with silicon dioxide microsphere adsorbents in combination with gas chromatography-electron capture detection for the determination of DDT and its metabolites in water samples

The goal of the present study was to investigate the feasibility of silicon dioxide (SiO(2)) microspheres without special modification to enrich dichlorodiphenyltrichloroethane (DDT) and its main metabolites, p,p'-dichlorodiphenyl-2,2-dichloroethylene (p,p'-DDD) and p,p'-dichlorodiphenyldichloroethylene (DDE) in combination with gas chromatography-electron-capture detection. The experimental results indicated that an excellent linear relationship between the recoveries and the concentrations of DDT and its main metabolites was obtained in the range of 0.2-30 ng mL(-1) and the correlation coefficients were in the range of 99.96-99.99%. The detection limits based on the ratio of signal to the baseline noise (S/N = 3) were 2.2, 2.9, 3.8 and 4.1 ng L(-1) for p,p'-DDD, p,p'-DDT, o,p'-DDT, and p,p'-DDE, respectively. The precisions of the proposed method were all below 10% (n = 6). Four real water samples were utilized for validation of the proposed method, and satisfactory spiked recoveries in the range of 72.4-112.9% were achieved. These results demonstrated that the developed method was a simple, sensitive, and robust analytical method for the monitoring of pollutants in the environment.

Use of a deuterated internal standard with pyrolysis-GC/MS dimeric marker analysis to quantify tire tread particles in the environment

Pyrolysis(pyr)-GC/MS analysis of characteristic thermal decomposition fragments has been previously used for qualitative fingerprinting of organic sources in environmental samples. A quantitative pyr-GC/MS method based on characteristic tire polymer pyrolysis products was developed for tread particle quantification in environmental matrices including soil, sediment, and air. The feasibility of quantitative pyr-GC/MS analysis of tread was confirmed in a method evaluation study using artificial soil spiked with known amounts of cryogenically generated tread. Tread concentration determined by blinded analyses was highly correlated (r2 ≥ 0.88) with the known tread spike concentration. Two critical refinements to the initial pyrolysis protocol were identified including use of an internal standard and quantification by the dimeric markers vinylcyclohexene and dipentene, which have good specificity for rubber polymer with no other appreciable environmental sources. A novel use of deuterated internal standards of similar polymeric structure was developed to correct the variable analyte recovery caused by sample size, matrix effects, and ion source variability. The resultant quantitative pyr-GC/MS protocol is reliable and transferable between laboratories.

DNA strand breaks detected in embryos of the adult snails, Potamopyrgus antipodarum, and in neonates exposed to genotoxic chemicals

We tested the freshwater mudsnail Potamopyrgus antipodarum, which is a species that has already been used for endocrine-disrupting compounds (EDCs) to determine whether early life stages of aquatic organisms are sensitive to genotoxic chemicals. For this purpose, we first developed the alkaline comet assay on adults, embryos, and neonates. The comet assay protocol was validated on both embryonic cells exposed in vitro to hydrogen peroxide and adult snails in the reproducing stage exposed to methyl methane sulfonate. During the latter experiment, DNA strand breaks were investigated on both embryonic cells and on adult gill cells. The second part of this study investigated the stability of DNA strand breaks in adult reproducing snails and neonates exposed to cadmium (Cd) and bisphenol A for 8 days. Hydrogen peroxide-induced DNA strand breaks in vitro in isolated embryonic cells. Exposure of adult reproducing snails to methyl methane sulfonate for 24h induced DNA strand breaks in embryos. Bisphenol A induced a significant increase in the DNA strand-break level in whole embryonic cells and whole neonate cells. Cd was genotoxic for both embryos and neonates during the exposure time and also after 7 days of depuration, suggesting that Cd could inhibit DNA repair enzymes. These preliminary results on this original model have encouraged us to consider the impact of genotoxic environmental contaminants on the F1 generation.

Determination of three alkylphenol isomers in various water samples using a new HPLC method based on a duet stationary phase

The level of three alkylphenols (APs) 4-nonylphenol, 4-octylphenol and 4-tert-octylphenol was monitored in various water samples using a new developed and validated HPLC method. The HPLC method employed a column with a mixed-mode stationary phase (C18/SCX) using a mobile phase of water to methanol = 15:85 (v/v) delivered at a flow rate of 1 mL/min at room temperature. Both diode array, DAD and fluorescence, FLD detectors were employed. The method is linear when APs concentration ranged from 0.025 to 0.5 μg/mL with a DAD detection at 279 nm and between 0.0008 and 0.1 μg/mL when the detection was made by FLD (excitation at 220 nm, emission at 315 nm). The limit of detection and limit of quantitation for alkylphenols were found to be 5 and 15 ng/mL, respectively (detection by DAD). The method was employed with good results for the determination of APs in the presence of polycyclic aromatic hydrocarbons in various water samples.

Analysis of endocrine disrupting pesticides by capillary GC with mass spectrometric detection

Endocrine disrupting chemicals, among them many pesticides, alter the normal functioning of the endocrine system of both wildlife and humans at very low concentration levels. Therefore, the importance of method development for their analysis in food and the environment is increasing. This also covers contributions in the field of ultra-trace analysis of multicomponent mixtures of organic pollutants in complex matrices. With this fact conventional capillary gas chromatography (CGC) and fast CGC with mass spectrometric detection (MS) has acquired a real importance in the analysis of endocrine disrupting pesticide (EDP) residues. This paper provides an overview of GC methods, including sample preparation steps, for analysis of EDPs in a variety of matrices at ultra-trace concentration levels. Emphasis is put on separation method, mode of MS detection and ionization and obtained limits of detection and quantification. Analysis time is one of the most important aspects that should be considered in the choice of analytical methods for routine analysis. Therefore, the benefits of developed fast GC methods are important.

HPLC-FLD determination of 4-nonylphenol and 4-tert-octylphenol in surface water samples

A simple, sensitive and reliable HPLC-FLD method for the routine determination of 4-nonylphenol, 4-NP and 4-tert-octylphenol, 4-t-OP content in water samples was developed. The method consists in a liquid-liquid extraction of the target analytes with dichloromethane at pH  3.0-3.5 followed by the HPLC-FLD analysis of the organic extract using a Zorbax Eclipse XDB C8 column, isocratic elution with a mixed solvent acetonitrile/water 65:35, at a flow rate of 1.0 mL/min and applying a column temperature of 40°C. The method was validated and then applied with good results for the determination of 4-NP and 4-t-OP in Ialomiţa River water samples collected each month during 2006. The concentration levels of 4-NP and 4-t-OP vary between 0.08-0.17 μg/L with higher values of 0.24-0.37 μg/L in the summer months for 4-NP, and frequently <0.05 μg/L but also between 0.06-0.09 μg/L with higher values of 0.12-0.16 μg/L in July and August for 4-t-OP and were strongly influenced by sesonial and anthropic factors. The method was also applied on samples collected over 2 years 2007 and 2008 from urban wastewaters discharged into sewage or directly into the rivers by economic agents located in 30 Romanian towns. Good results were obtained when the method was used for analysis of effluents discharged into surface waters by 16 municipal wastewater treatment plants, during the year 2008.