A review of current trends and advances in modern bio-analytical methods: Chromatography and sample preparation

Microextraction Techniques for Sample Preparation of Amphetamines in Urine: A Comprehensive Review

Psychological disorders and dramatic social problems are serious concerns regarding the abuse of amphetamine and its stimulant derivatives worldwide. Consumers of such drugs experience great euphoria along with serious health problems. Determination and quantification of amphetamine-type stimulants are indispensable skills for clinical and forensic laboratories. Analysis of low drug doses in bio-matrices necessitates applications of simple and also effective preparation steps. The preparation procedures not only eliminate adverse matrix effects, but also provide reasonable clean-up and pre-concentration benefits. The current review presents different methods used for sample preparation of amphetamines from urine as the most frequently used biological matrix. The advantages and limitations of various sample preparation methods were discussed focusing on the miniaturized methods.

Quantification of the Plasma Concentration of Vadadustat by High-Performance Liquid Chromatography with Ultraviolet Detection and Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry

BACKGROUND

An inexpensive, simple, and accurate plasma concentration measurement system is needed to actively conduct pharmacokinetic and pharmacodynamic analyses of vadadustat, hypoxia-inducible factor-prolyl hydroxylase inhibitor, in clinical settings. In this study, the authors aimed to develop a method for measuring vadadustat in human plasma that could be applied for therapeutic drug monitoring using high-performance liquid chromatography with ultraviolet detection (HPLC-UV) in a clinical setting.

METHODS

Plasma samples (100 μL) were pretreated with acetonitrile using butyl paraoxybenzoate as an internal standard. Chromatographic separation was performed on a SunShell PFP C18 column (2.6 μm, 4.6 mm × 150 mm). The mobile phase consisted of (A) 20 mM of phosphate buffer (pH 2.4) and (B) acetonitrile (60:40, v/v), delivered isocratically at a flow rate of 1 mL/min. The analytes were detected by UV absorbance at a wavelength of 220 nm, and the column temperature was 40°C. To evaluate the applicability of HPLC-UV in a clinical setting, blood samples were collected at 19 time points from 7 patients who had been taking vadadustat.

RESULTS

The calibration curve was linear over the concentration range of 0.2-150 mcg/mL (R2 > 0.99). Intra-assay and interassay accuracy, precision, and stability met the Food and Drug Administration recommendations. The vadadustat plasma concentrations of patients analyzed using the current HPLC-UV method were almost equal to those measured using ultra-performance liquid chromatography-tandem mass spectrometry (mean difference: 0.13 mcg/mL). Large variability in the dose-adjusted plasma concentrations of vadadustat at 12 hours after administration was observed between patients (coefficient of variation = 57.6%).

CONCLUSIONS

This HPLC-UV method is a simple, accurate quantification method for evaluating plasma concentrations in patients taking vadadustat in a clinical setting.

An Update on Current Trend in Sample Preparation Automation in Bioanalysis: strategies, Challenges and Future Direction

Automation in sample preparation improves accuracy, productivity, and precision in bioanalysis. Moreover, it reduces resource consumption for repetitive procedures. Automated sample analysis allows uninterrupted handling of large volumes of biological samples originating from preclinical and clinical studies. Automation significantly helps in management of complex testing methods where generation of large volumes of data is required for process monitoring. Compared to traditional sample preparation processes, automated procedures reduce associated expenses and manual error, facilitate laboratory transfers, enhance data quality, and better protect the health of analysts. Automated sample preparation techniques based on robotics potentially increase the throughput of bioanalytical laboratories. Robotic liquid handler, an automated sample preparation system built on a robotic technique ensures optimal laboratory output while saving expensive solvents, manpower, and time. Nowadays, most of the traditional extraction processes are being automated using several formats of online techniques. This review covered most of the automated sample preparation techniques reported till date, which accelerated and simplified the sample preparation procedure for bioanalytical sample analysis. This article critically analyzed different developmental aspects of automated sample preparation techniques based on robotics as well as conventional sample preparation methods that are accelerated using automated technologies.

Determination of marker residues of quinoxaline-1,4-di-N-oxides and its prototype identification by liquid chromatography tandem mass spectrometry

Quinoxaline-1,4-di-N-oxides (QdNOs), such as carbadox, olaquindox, mequindox, quinocetone, etc. are a class of antibacterial drugs. Prototype drugs residues can not be detected due to their rapid metabolism in animals. Quinoxaline-2-carboxylic acid (QCA) and 3-methyl-QCA (MQCA) are their common marker residues, so it has been always a challenge to trace the specific QdNOs drug used in food animal production. Herein, a liquid chromatography tandem mass spectrometry method was developed to determine QCA and MQCA, and meanwhile, the prototype drugs were identified by analyzing bis-desoxy QdNOs metabolites in single ion-pair monitoring mode. The method indicated that the average recoveries for QCA and MQCA were from 90 % to 105 % with relative standard deviations below 10 %, and the limits of quantification were 1.0 μg/kg. The limits of detection of five bis-desoxy QdNOs (qualitative markers) reached 0.5 μg/kg. This new analytical strategy can effectively solve the identification problem of QdNOs drugs in animal-derived food.

Simultaneous Determination of Selected Steroids with Neuroactive Effects in Human Serum by Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

Neuroactive steroids are a group of steroid molecules that are involved in the regulation of functions of the nervous system. The nervous system is not only the site of their action, but their biosynthesis can also occur there. Neuroactive steroid levels depend not only on the physiological state of an individual (person's sex, age, diurnal variation, etc.), but they are also affected by various pathological processes in the nervous system (some neurological and psychiatric diseases or injuries), and new knowledge can be gained by monitoring these processes. The aim of our research was to develop and validate a comprehensive method for the simultaneous determination of selected steroids with neuroactive effects in human serum. The developed method enables high throughput and a sensitive quantitative analysis of nine neuroactive steroid substances (pregnenolone, progesterone, 5α-dihydroprogesterone, allopregnanolone, testosterone, 5α-dihydrotestosterone, androstenedione, dehydroepiandrosterone, and epiandrosterone) in 150 μL of human serum by ultrahigh-performance liquid chromatography with tandem mass spectrometry. The correlation coefficients above 0.999 indicated that the developed analytical procedure was linear in the range of 0.90 nmol/L to 28.46 μmol/L in human serum. The accuracy and precision of the method for all analytes ranged from 83 to 118% and from 0.9 to 14.1%, respectively. This described method could contribute to a deeper understanding of the pathophysiology of various diseases. Similarly, it can also be helpful in the search for new biomarkers and diagnostic options or therapeutic approaches.

What is the role of current mass spectrometry in pharmaceutical analysis?

The role of mass spectrometry (MS) has become more important in most application domains in recent years. Pharmaceutical analysis is specific due to its stringent regulation procedures, the need for good laboratory/manufacturing practices, and a large number of routine quality control analyses to be carried out. The role of MS is, therefore, very different throughout the whole drug development cycle. While it dominates within the drug discovery and development phase, in routine quality control, the role of MS is minor and indispensable only for selected applications. Moreover, its role is very different in the case of analysis of small molecule pharmaceuticals and biopharmaceuticals. Our review explains the role of current MS in the analysis of both small-molecule chemical drugs and biopharmaceuticals. Important features of MS-based technologies being implemented, method requirements, and related challenges are discussed. The differences in analytical procedures for small molecule pharmaceuticals and biopharmaceuticals are pointed out. While a single method or a small set of methods is usually sufficient for quality control in the case of small molecule pharmaceuticals and MS is often not indispensable, a large panel of methods including extensive use of MS must be used for quality control of biopharmaceuticals. Finally, expected development and future trends are outlined.

Matrix effect in bioanalytical assay development using supercritical fluid chromatography-mass spectrometry

Matrix effect (ME) is commonly caused by coelution of compounds with target analytes, resulting in either suppression or enhancement of analyte ionization. Thus, to achieve the desired accuracy, precision, and sensitivity, ME needs to be evaluated and controlled during bioanalytical method development. As the application of supercritical fluid chromatography-mass spectrometry (SFC-MS) for analysis of biological samples has increased, ME using SFC-MS has also been investigated with a focus on the difference in ME in SFC-MS compared to other chromatographic techniques used for achiral separation in biological samples. Here, we provide a summary of the status of ME evaluation and mitigation in SFC-MS methods. This review presents an overview of the phenomenon of ME and methods for evaluating ME in bioanalysis. Next, the factors that can impact ME in SFC-MS-based bioanalytical methods are discussed in detail with an emphasis on SFC. A literature review of the evaluation of ME in targeted bioanalytical methods using SFC-MS is included at the end. Robust instrumentation, effective sample preparation, and superb separation selectivity are the foundations of reliable analytical methods as well as the ability to mitigate detrimental ME in SFC-MS methods.

A Highly Selective Analytical Method Based on Salt-Assisted Liquid-Liquid Extraction for Trace-Level Enrichment of Multiclass Pesticide Residues in Cow Milk for Quantitative Liquid Chromatographic Analysis

In this study, a simple, inexpensive, selective, and fast salting-out assisted liquid-liquid extraction (SALLE) technique coupled with high-pressure liquid chromatography-diode array detection (HPLC-DAD) was developed for the extraction, preconcentration, and analysis of trace level seven multiclass pesticide residues in pasteurized and raw cow milk samples. The significant factors that affect the extent to which the target analytes are extracted, such as the type of extraction solvent and its volume, the type and concentration of salting-out salts, the pH of the solution, and the extraction time, have been investigated. Under optimum conditions, the correlation coefficient (r2) was obtained within a range of 0.9982-0.9997 for a broad linear range concentration of 2-1500 ng·mL-1. Reliable sensitivity was achieved with limits of detection (LODs) and limits of quantification (LOQs) ranging from 0.58-2.56 ng·mL-1 and 1.95-8.51 ng·mL-1, respectively. While precision with interday and intraday in terms of relative standard deviations (RSDs) was observed in the range of 1.97 - 7.88% and 4.52 - 8.04%, respectively. The results of the precision studies reveal that good repeatability and reproducibility (RSDs <9) were achieved, thus showing a low variability extraction of the developed method. Finally, the proposed and validated approach was effectively used to extract and determine pesticide residues in real milk matrices; however, the target analytes were not detected in all samples.

Optimization and validation of analytical affinity chromatography for the in-process monitoring and quantification of peptides containing a C-tag

Antimicrobial peptides and proteins (AMPs) are promising alternatives to conventional antibiotics for the treatment of infections caused by multidrug-resistant bacteria. The production of recombinant AMPs is facilitated by platform technologies such as the C-tag, a sequence of four C-terminal amino acids that allows immunoaffinity capture and purification. However, the detection and quantification of such products throughout the manufacturing process is a significant challenge. We therefore used a design of experiments approach to optimize a novel high-throughput analytical immunoaffinity chromatography method for the accurate quantification of AMPs containing a C-tag, resulting in minimal analyte carryover (98.8 ± 0.1 % product elution). We then validated the method in accordance with International Conference on Harmonisation guideline Q2(R2). Validation confirmed that the method achieves high specificity, linearity, accuracy, and precision. We implemented in-process control and quantification throughout the manufacturing process, from cell lysis to the final purified product. We found that the lysate and acidic samples (pH < 2) can lead to deviations. However, following sample pretreatment, C-tag quantification reduced the error to ≤ 4 %, which is potentially superior to current non-specific quantification methods such as UV absorbance and colorimetry. Implementing this method for in-process control and quantification throughout the manufacturing process achieves the reliable assessment of product quantity and quality. This method also offers improvements over the product-specific enzyme-linked immunosorbent assay currently used for C-tagged products because it has a higher precision, accuracy and throughput, with a measurement time of 2.5 min per sample. Our analytical affinity chromatography method is therefore a valuable tool for the quantification of AMPs as part of a novel platform technology approach for C-tagged products.

Lab-in-syringe automated protein precipitation and salting-out homogenous liquid-liquid extraction coupled online to UHPLC-MS/MS for the determination of beta-blockers in serum

A sample preparation method involving tandem implementation of protein precipitation and salting-out homogenous liquid-liquid extraction was developed for the determination of beta-blockers in serum. The entire procedure was automated using a computer-controlled syringe pump following the Lab-In-Syringe approach. It is based on the denaturation of serum proteins with acetonitrile followed by salt-induced phase separation upon which the proteins accumulate as a compact layer at the interphase of the solutions. The extract is then separated and diluted in-syringe before being submitted to online coupled UHPLC-MS/MS. A 1 mL glass syringe containing a small stir bar for solution mixing at up to 3000 rpm, was used to deal with sample volumes as small as 100 μL. A sample throughput of 7 h^-1 was achieved by performing the chromatographic run and sample preparation procedure in parallel. Linear working ranges were obtained for all analytes between 5 and 100 ng mL^-1, with LOD values ranging from 0.4 to 1.5 ng mL^-1. Accuracy values in the range of 88.2-106% and high precision of <11% RSD suggest applicability for routine analysis that can be further improved using deuterated standards.

Dispersive solid phase extraction of metronidazole and clarithromycin from human plasma using a β-cyclodextrin grafted polyethylene polymer composite

In this work, for the first time, a polymeric composite based on β-cyclodextrin grafted with polyethylene has been prepared through ball milling and used as an efficient sorbent for dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The prepared sorbent was characterized using Fourier transform infrared spectrophotometry, X-ray diffraction, and scanning electron microscopy. In the extraction process, after precipitating the proteins, the sorbent was added into the sample solution, and the mixture was vortexed to facilitate and speed up the sorption of the analytes onto the sorbent surface. After centrifuging, the sorbent particles were contacted with methanol to elute the analytes under the vortexing process. After this step, an aliquot of the eluate was taken and injected into high-performance liquid chromatography-diode array detector for quantitative analysis. Under the optimum extraction conditions, the extraction recoveries for metronidazole and clarithromycin were 76 and 83%, respectively. The limits of detection were 2.6 and 2.2 ng/ml for metronidazole and clarithromycin, respectively. The repeatability of the offered approach, expressed as relative standard deviation, was equal to or less than 4.7%. Finally, the method was successfully applied to plasma samples of the patients treated with metronidazole and clarithromycin.

A new electromembrane extraction probe for on-line connection with capillary electrophoresis for determination of substances in biological matrices

A miniature probe for electromembrane extraction is developed and constructed. The tubular probe with an internal volume of 1.1 μL is made of polypropylene hollow fiber with a supported liquid membrane of 85% nitrophenyloctyl ether (NPOE) with 15% bis(2-ethylhexyl)phosphonic acid (DEHP). The probe is connected on-line to the electrophoresis with short separation capillary via an air assisted flow gating interface cast from poly (dimethylsiloxane). The compact instrument is computer controlled via LabView. The probe parameters are tested for extraction of creatinine and basic amino acids from artificial solution and human urine. The sensitivity of the electrophoretic determination after 300 s extraction at 150 V compared to the sensitivity without extraction is 4.9-fold and 2.6-fold higher for creatinine and arginine, respectively. The RSDs for peak area measured from 5 repeated extractions of 50 μM solutions are 7.5%, 7.2%, 8.6% and 9.2% for Crea, Lys, Arg and His, respectively. The probe can be used for all-day measurements. The preparation of the probe is simple and requires no special tool.

Amanitins in Wild Mushrooms: The Development of HPLC-UV-EC and HPLC-DAD-MS Methods for Food Safety Purposes

Mushroom poisoning remains a serious food safety and health concern in some parts of the world due to its morbidity and mortality. Identification of mushroom toxins at an early stage of suspected intoxication is crucial for a rapid therapeutic decision. In this study, a new extraction method was developed to determine α- and β-amanitin in mushroom samples collected from central Portugal. High-performance liquid chromatography with in-line ultraviolet and electrochemical detection was implemented to improve the specificity of the method. The method was fully validated for linearity (0.5-20.0 µg·mL^-1), sensitivity, recovery, and precision based on a matrix-matched calibration method. The limit of detection was 55 µg mL^-1 (UV) and 62 µg mL^-1 (EC) for α-amanitin and 64 µg mL^-1 (UV) and 24 µg mL^-1 (EC) for β-amanitin. Intra- and inter-day precision differences were less than 13%, and the recovery ratios ranged from 89% to 117%. The developed method was successfully applied to fourteen Amanita species (A. sp.) and compared with five edible mushroom samples after extraction with Oasis^® PRIME HLB cartridges without the conditioning and equilibration step. The results revealed that the A. phalloides mushrooms present the highest content of α- and β-amanitin, which is in line with the HPLC-DAD-MS. In sum, the developed analytical method could benefit food safety assessment and contribute to food-health security, as it is rapid, simple, sensitive, accurate, and selectively detects α- and β-amanitin in any mushroom samples.

Chromatographic Methods for the Determination of Rifampicin, Isoniazid, Pyrazinamide, Ethambutol, and Main Metabolites in Biological Samples: A Review

Bioanalytical methods are used to quantify drugs and their metabolites in biological samples in order to determine bioequivalence, perform pharmacokinetic and bioavailability studies, and complete therapeutic drug monitoring. The objective of this review paper is to describe bioanalytical methods based on Liquid Chromatography that are used to quantify antitubercular drugs and their metabolites in different biological samples, utilizing scientific literature from 1992 to 2021.

Extraction and characterization of phenolic compounds and their potential antioxidant activities

For thousands of years, plant has been widely applied in the medical area and is an important part of human diet. A high content of nutrients could be found in all kinds of plants, and the most outstanding group of nutrients that attracts scientists' attention is the high level of phenolic compounds. Due to the relationship between high phenolic compound content and high antioxidant capacity, plant extracts are expected to become a potential treatment for oxidation stress diseases including diabetes and cancer. However, according to the instability of phenolic compounds to light and oxygen, there are certain difficulties in the extraction of such compounds. But after many years of development, the extraction technology of phenolic compounds has been quite stable, and the only problem is how to obtain high-quality extracts with high efficiency. To further enhance the value of plant extracts, concentration and separation methods are often applied, and when detailed analysis is required, characterization methods including HPLC and LC/GC-MS will be applied to evaluate the number and type of phenolic compounds. A series of antioxidant assays are widely performed in numerous studies to test the antioxidant capacity of the plant extracts, which is also an important basis for evaluating value of extracts. This paper intends to provide a view of a variety of methods used in plants' phenolic compound extraction, separation, and characterization. Furthermore, this review presents the advantages and disadvantages of techniques involved in phenolic compound research and provides selected representative bibliographic examples.

A New Trend and Future Perspectives of the Miniaturization of Conventional Extraction Methods for Elemental Analysis in Different Real Samples: A Review

Sample preparation is one of the viable procedures to be used before analysis to enhance sensitivity and reduce the matrix effect. The current review is mainly emphasized the latest outcome and applications of microextraction techniques based on the miniaturization of the classical conventional methods based on liquid-phase and solid-phase extraction for the quantitative elemental analysis in different real samples. The limitation of the conventional sample preparation methods (liquid and solid phase extraction) has been overcome by developing a new way of reducing size as compared with the conventional system through the miniaturization approach. Miniaturization of the sample preparation techniques has received extensive attention due to its extraction at microlevels, speedy, economical, eco-friendly, and high extraction capability. The growing demand for speedy, economically feasible, and environmentally sound analytical approaches is the main intention to upgrade the conventional procedures apply for sample preparation in environmental investigation. A growing trend of research has been perceived to quantify the trace for elemental analysis in different natures of real samples. This review also recapitulates the current futuristic scenarios for the green and economically viable procedure with special overemphasis and concentrates on eco-friendly miniaturized sample-preparation techniques such as liquid-phase microextraction (LPME) and solid-phase microextraction (SPME). This review also emphasizes the latest progress and applications of the LPME and SPME approach and their future perspective.

A review of the modern principles and applications of solid-phase extraction techniques in chromatographic analysis

Analytical processes involving sample preparation, separation, and quantifying analytes in complex mixtures are indispensable in modern-day analysis. Each step is crucial to enriching correct and informative results. Therefore, sample preparation is the critical factor that determines both the accuracy and the time consumption of a sample analysis process. Recently, several promising sample preparation approaches have been made available with environmentally friendly technologies with high performance. As a result of its many advantages, solid-phase extraction (SPE) is practiced in many different fields in addition to the traditional methods. The SPE is an alternative method to liquid–liquid extraction (LLE), which eliminates several disadvantages, including many organic solvents, a lengthy operation time and numerous steps, potential sources of error, and high costs. SPE advanced sorbent technology reorients with various functions depending on the structure of extraction sorbents, including reversed-phase, normal-phase, cation exchange, anion exchange, and mixed-mode. In addition, the commercial SPE systems are disposable. Still, with the continual developments, the restricted access materials (RAM) and molecular imprinted polymers (MIP) are fabricated to be active reusable extraction cartridges. This review will discuss all the theoretical and practical principles of the SPE techniques, focusing on packing materials, different forms, and performing factors in recent and future advances. The information about novel methodological and instrumental solutions in relation to different variants of SPE techniques, solid-phase microextraction (SPME), in-tube solid-phase microextraction (IT-SPME), and magnetic solid-phase extraction (MSPE) is presented. The integration of SPE with analytical chromatographic techniques such as LC and GC is also indicated. Furthermore, the applications of these techniques are discussed in detail along with their advantages in analyzing pharmaceuticals, biological samples, natural compounds, pesticides, and environmental pollutants, as well as foods and beverages.

Exploring chemical diversity in Glycine max cultivars: A multivariate approach in the search for bioactive compounds against Spodoptera cosmioides

Soybean crop is regulated by abiotic and biotic stresses with great potential in reducing grain yield and quality. The selection of resistant cultivars is a promising approach for mitigating these damages. We evaluated the chemical profile of Glycine max leaves from different cultivars in order to explore their defense mechanisms against Spodoptera cosmioides caterpillars. We optimized solid-liquid extraction techniques using ultrasound bath and static headspace extraction. Additionally, we developed an approach based on liquid and gas chromatography for analyzing the chemical profile of G. max cultivars. The principal component analysis allowed the classification of transgenic cultivars, which are classified as susceptible to S. cosmioides, from those obtained by genetic improvement and resistant to the insect. Differences were observed in the abundance of phenolic glycosides, lipids, aldehydes, and alcohols. More specifically, S. cosmioides resistant cultivars presented molecules related to the jasmonic and salicylic acid pathways. Such data can contribute to a molecular understanding of phenotypic diversity in soybean cultivars, from plant quality to resistance mechanisms and adaptation, to environmental stress and herbivory.

Co-occurrence of mycotoxins: A review on bioanalytical methods for simultaneous analysis in human biological samples, mixture toxicity and risk assessment strategies

Mycotoxins are the toxic chemical substances that are produced by various fungal species and some of these are harmful to humans. Mycotoxins are ubiquitous in nature and humans could be exposed to multiple mycotoxins simultaneously. Unfortunately, exposure to mixed mycotoxins is not very well studied. Various studies have demonstrated the capacity of mycotoxins to show synergistic effect in the presence of other mycotoxins, thus, increasing the risk of toxicity. Hence, it is important to monitor mixed mycotoxins in human biological samples which would serve as a crucial information for risk assessment. Through this review paper, we aim to summarize the mixture toxicity of mycotoxins and the various bio-analytical techniques that are being used for the simultaneous analysis of mixed mycotoxins in human biological samples. Different sample preparation and clean-up techniques employed till date for eliminating the interferences from human biological samples without affecting the analyses of the mycotoxins are also discussed. Further, a brief introduction of risk assessment strategies that have been or could be adopted for multiple mycotoxin risk assessments is also mentioned. To the best of our knowledge, this is the first review that focuses solely on the occurrence of multiple mycotoxins in human biological samples as well as their risk assessment strategies.

Multi-residue methodology for quantification of antiparasitics in hen eggs by LC-MS/MS: development, validation and application to 348 samples from Brazil

Analytical methodology for quantification of 15 antiparasitic drugs and their respective metabolites in laying hen eggs was optimized and validated. The method uses acetonitrile as solvent extraction, sodium chloride for salting-out, low-temperature purification and analysis by LC-MS/MS. A total of 348 egg samples were collected in 11 states of Brazil and 50% of the total samples presented antiparasitic residues, which were albendazole, fipronil, fenbendazole, ivermectin, oxibendazole and mebendazole. A total of 12.4% of the samples were considered non-compliant, and residues quantified in these samples were albendazole, fipronil, and mebendazole. Albendazole was always identified as albendazole sulfone. Only one sample presented fipronil and fipronil sulfone; all others exclusively the sulfone metabolite. Fenbendazole was characterized by the presence of both metabolites: sulfone and sulfoxide. Maximum limits adopted are based on the Normative Instruction 51/2019 of the Brazilian Health Regulatory Agency (ANVISA), but albendazole, fipronil, oxibendazole, ivermectin, and mebendazole do not have their maximum residue level established. In addition, metabolites of albendazole, fipronil and fenbendazole in eggs are not considered in this Instruction.

Advances in the quality control of fenugreek seeds using chromatographic, spectroscopic and DNA-based techniques: A comprehensive review

INTRODUCTION

Fenugreek has been used in traditional remedies since ancient times. It has a long history of use against medical ailments as an antidiabetic, anticarcinogenic, hypocholesterolemic, antioxidant, antibacterial, hypoglycemic, gastric stimulant, and anti-anorexia agent. The major active constituents include alkaloids, fibres, saponins, proteins, and amino acids.

OBJECTIVES

To provide a comprehensive overview of the application of chromatographic and spectroscopic methods, in addition to DNA-profiling methods to assess the quality of fenugreek. Also, to highlight the recent application of chemometrics combined with quality control methods during the last two decades.

METHODOLOGY

A literature search conducted from January 2000 up to December 2020 using various scientific databases (e.g., Scopus, Medline, PubMed, EBSCO, JSTOR, ScienceDirect, Google Scholar, Web of Science and Egyptian Knowledge Bank, Academic Journals, and Springer Link); general web searches were also undertaken using Google applying some related search terms. Studies involving the application of quality control analyses were classified into three categories according to the conducted analysis method including chromatographic [high-performance liquid chromatography (HPLC), high-performance thin-layer chromatography (HPTLC), and gas chromatography (GC)], spectroscopic [ultraviolet (UV), infrared (IR), and nuclear magnetic resonance (NMR)], and DNA-based markers.

RESULTS

This review shed the light on relevant studies covering the past two decades, presenting the application of spectroscopic and chromatographic methods and DNA profiling in the quality control of fenugreek.

CONCLUSION

The reviewed chromatographic and spectroscopic methods combined with chemometrics provide a powerful tool that could be applied widely for the quality control of fenugreek.

Simple method for the determination of anthelmintic drugs in milk intended for human consumption using liquid chromatography-tandem mass spectrometry

BACKGROUND

Helminth infections in animals to be consumed by humans are an important medical and public health problem. Pharmaceutical research has focused on developing new anthelmintic drugs for parasite control in these animals. However, the incorrect use of anthelmintics can leave residues in animal products intended for human consumption. Their determination is therefore crucial in terms of food safety.

RESULTS

In this work, a simple and sensitive method has been developed for the analysis of anthelmintic drugs in milk. The method involves extraction of the analytes using a QuEChERS (quick, easy, cheap, effective, rugged, and safe) method, and separation and determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The use of a core-shell column significantly reduced the analysis time compared with conventional columns. The method was validated and applied to the analysis of different commercial milk samples: whole, semi-skimmed and skimmed cows' milk, and goats' milk. None of the benzimidazoles studied was found in the samples analyzed, so these were spiked with the analytes at three concentration levels (10, 50, and 100 μg kg^-1 ).

CONCLUSIONS

The proposed method provided high sensitivity compared with other methods for the determination of anthelmintics in milk samples, at concentration levels well below the established maximum residue limit (MRLs) values. The proposed method is simple, easy, precise, accurate, and leads to good recovery levels. It can be used successfully for the routine analysis. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Pharmacokinetics, plasma protein binding, and metabolism of a potential natural chemosensitizer from Marsdenia tenacissima in rats

ETHNOPHARMACOLOGICAL RELEVANCE

Marsdenia tenacissima (Roxb.) Wight et Arn is a medicinal plant mainly distributed in southwest China. It is used in folk medicine for the treatment of tumors and is synergistic with chemotherapies. In our previous study, 11α-O-2-methybutyryl-12β-O-tigloyl-tenacigenin B (MT2), a main steroid aglycone isolated from the total aglycones of M. tenacissima, significantly enhanced the in vivo antitumor effect of paclitaxel in mice bearing human tumor xenografts, showing its potential as a chemosensitizer. However, the pharmacokinetic characteristics, plasma protein binding rate, and metabolic profile of MT2 remain unclear.

AIM OF THE STUDY

To elucidate the pharmacokinetic characteristics, plasma protein binding rate, and metabolic profile of MT2 in rats.

MATERIALS AND METHODS

MT2 in rat plasma and phosphate-buffered saline was quantified using ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) method, while the MT2 metabolites in rat liver microsomes were analyzed using UPLC-triple time-of-flight MS/MS.

RESULTS

For intravenously administered MT2, the maximum plasma concentration and the area under the plasma concentration-time curve indicated dose dependency, while the elimination half-life time, the mean residence time, apparent volume of distribution and total apparent clearance values remained relatively unchanged in both the 5 mg/kg and 10 mg/kg groups. For orally administered MT2, the bioavailability was 1.08-1.11%. In rat plasma, MT2 exhibited a protein binding rate of 93.84-94.96%. In rat liver microsomes, MT2 was metabolized by oxidation alone or in combination with demethylation, and five MT2 metabolites were identified.

CONCLUSION

MT2 has low oral bioavailability and a high plasma protein binding rate in rats. After administration, MT2 is transformed into oxidative metabolites in the liver. To achieve a high blood concentration of MT2, it should be administered intravenously. These findings would serve as a reference for further MT2-based pharmacological study and drug development.

Evaluation of acetamiprid and azoxystrobin residues and their hormonal disrupting effects on male rats using liquid chromatography-tandem mass spectrometry

Endocrine-disrupting compounds as pesticides affect the hormonal balance, and this can result in several diseases. Therefore, the analysis of representative hormones with acetamiprid (AC) and azoxystrobin (AZ) was a good strategy for the investigation of the endocrine-disrupting activity of pesticides. Hence, a sensitive and rapid analytical method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed. The method was validated for the analysis of AC, AZ, estriol, estrone, progesterone, and testosterone in the serum, testis, and liver of rats. The correlation between the residues of pesticides and the disturbance of the endocrine system was evaluated. The different mass parameters, mobile phase types, analytical columns, injection volumes, and extraction solvents were compared to get the lowest limit of detection of the studied compounds. The detection limits of AC, AZ, estriol, estrone, progesterone, and testosterone were 0.05, 0.05, 1.0, 10, and 1.0 ng/ml, respectively. The method developed was applied to evaluate the changes in these hormones induced by the duration of exposure to AC and AZ in rat testis and serum. The hormones level in rat serum and testis had a significant decrease as they were oral gavage treated with different high concentrations of studied pesticides. Both pesticides were distributed in the body of rats by the multi-compartment model (liver, testis, and serum).

Extraction of small molecule from human plasma by prototyping 3D printed sorbent through extruded filament for LC-MS/MS analysis

Analytical sample preparation techniques are regarded as crucial steps for analyzing compounds from different biological matrices. The development of new extraction techniques is a modern trend in the bioanalytical sciences. 3D printed techniques have emerged as a valuable technology for prototyping devices in customized shapes for a cost-effective way to advance analytical sample preparation techniques. The present study aims to fabricate customized filaments through the hot-melt extrusion (HME) technique followed by fused deposition modeling mediated 3D printing process for rapid prototyping of 3D printed sorbents to extract a sample from human plasma. Thus, we fabricated our own indigenous filament using poly (vinyl alcohol), Eudragit® RSPO, and tri-ethyl citrate through HME to prototype the fabricated filament into a 3D printed sorbent for the extraction of small molecules. The 3D sorbent was applied to extract hydrocortisone from human plasma and analyzed using a validated LC-MS/MS method. The extraction procedure was optimized, and the parameters influencing the sorbent extraction were systematically investigated. The extraction recovery of hydrocortisone was found to be >82% at low, medium, and high quality control samples, with a relative standard deviation of <2%. The intra-and inter-day precisions for hydrocortisone ranged from 1.0% to 12% and 2.0%-10.0%, respectively, whereas the intra-and inter-day accuracy for hydrocortisone ranged from 93.0% to 111.0% and 92.0% to 110.0%, respectively. The newly customizable size and shape of the 3D printed sorbent opens new possibilities for extracting small molecules from human plasma.

Dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction for the determination of some pesticides in molasses samples

In this study, a sensitive analytical method was developed to determine some pesticides (cyprodinil, trifloxystrobin, prometryn, propachlor, fenitrothion, chlorpyrifos, profenofos, and phosalone) in molasses samples. Pesticides were extracted from samples by dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction and determined by gas chromatography-mass spectrometry analysis. In this method, pesticides in molasses samples were first extracted using a water-miscible solvent (acetonitrile) in the sugaring-out homogeneous liquid-liquid extraction stage. The sugar in the ratio of 84-88% naturally contained in the molasses sample enabled phase separation in the acetonitrile-water homogeneous mixture. Then acetonitrile phase containing pesticides was used as dispersing solvent in the second step of the process. Under the specified optimum conditions, the limit of detection was calculated between 0.8-6.1 ng/g and the limit of quantification was in the range of 2.5-20 ng/g. The relative standard deviation values of molasses samples containing 150 ng/g of each analyte were found to be lower than 4.9% intra-day and 5.6% for inter-day. This validated method has been successfully applied to different types of molasses.

Sphingolipids in foodstuff: Compositions, distribution, digestion, metabolism and health effects - A comprehensive review

Sphingolipids (SLs) are common in all eukaryotes, prokaryotes, and viruses, and played a vital role in human health. They are involved in physiological processes, including intracellular transport, cell division, and signal transduction. However, there are limited reviews on dietary effects on endogenous SLs metabolism and further on human health. Various dietary conditions, including the SLs-enriched diet, high-fat diet, and vitamins, can change the level of endogenous SLs metabolites and even affect human health. This review systematically summarizes the main known SLs in foods concerning their variety and contents, as well as their isolation and identification approaches. Moreover, the present review discusses the role of dietary (particularly SLs-enriched diet, high-fat diet, and vitamins) in endogenous SLs metabolism, highlighting how exogenous SLs are digested and absorbed. The role of SLs family in the pathogenesis of diseases, including cancers, neurological disorders, infectious and inflammatory diseases, and cardiovascular diseases, and in recently coronavirus disease-19 outbreak was also discussed. In the post-epidemic era, we believe that the concern for health and the need for plant-based products will increase. Therefore, a need for research on the absorption and metabolism pathway of SLs (especially plant-derived SLs) and their bioavailability is necessary. Moreover, the effects of storage treatment and processing on the content and composition of SLs in food are worth exploring. Further studies should also be conducted on the dose-response of SLs on human health to support the development of SLs supplements. More importantly, new approaches, such as, making SLs based hydrogels can effectively achieve sustained release and targeted therapies.

Liquid chromatographic methods for determination of the new antiepileptic drugs stiripentol, retigabine, rufinamide and perampanel: A comprehensive and critical review

The new antiepileptic drugs perampanel, retigabine, rufinamide and stiripentol have been recently approved for different epilepsy types. Being them an innovation in the antiepileptics armamentarium, a lot of investigations regarding their pharmacological properties are yet to be performed. Besides, considering their broad anticonvulsant activities, an extension of their therapeutic indications may be worthy of investigation, especially regarding other seizure types as well as other central nervous system disorders. Although different liquid chromatographic (LC) methods coupled with ultraviolet, fluorescence, mass or tandem-mass spectrometry detection have already been developed for the determination of perampanel, retigabine, rufinamide and stiripentol, new and more cost-effective methods are yet required. Therefore, this review summarizes the main analytical aspects regarding the liquid chromatographic methods developed for the analysis of perampanel, retigabine (and its main active metabolite), rufinamide and stiripentol in biological samples and pharmaceutical dosage forms. Furthermore, the physicochemical and stability properties of the target compounds will also be addressed. Thus, this review gathers, for the first time, important background information on LC methods that have been developed and applied for the determination of perampanel, retigabine, rufinamide and stiripentol, which should be considered as a starting point if new (bio)analytical techniques are aimed to be implemented for these drugs.

Principles of odor coding in vertebrates and artificial chemosensory systems

The biological olfactory system is the sensory system responsible for the detection of the chemical composition of the environment. Several attempts to mimic biological olfactory systems have led to various artificial olfactory systems using different technical approaches. Here we provide a parallel description of biological olfactory systems and their technical counterparts. We start with a presentation of the input to the systems, the stimuli, and treat the interface between the external world and the environment where receptor neurons or artificial chemosensors reside. We then delineate the functions of receptor neurons and chemosensors as well as their overall I-O relationships. Up to this point, our account of the systems goes along similar lines. The next processing steps differ considerably: while in biology the processing step following the receptor neurons is the "integration" and "processing" of receptor neuron outputs in the olfactory bulb, this step has various realizations in electronic noses. For a long period of time, the signal processing stages beyond the olfactory bulb, i.e., the higher olfactory centers were little studied. Only recently there has been a marked growth of studies tackling the information processing in these centers. In electronic noses, a third stage of processing has virtually never been considered. In this review, we provide an up-to-date overview of the current knowledge of both fields and, for the first time, attempt to tie them together. We hope it will be a breeding ground for better information, communication, and data exchange between very related but so far little connected fields.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

Thin film molecularly imprinted polymer (TF-MIP), a selective and single-use extraction device for high-throughput analysis of biological samples

Enhancing selectivity, reducing matrix effects and increasing analytical throughput have been the main objectives in the development of biological sample preparation techniques. A thin film molecularly imprinted polymer (MIP) is employed for extraction and analysis of tricyclic antidepressants (TCAs) as a model class of compounds in human plasma for the first time to reach the abovementioned goals. The thin film MIPs prepared on a metal substrate can be used directly for extraction from biological matrices with no sample manipulation steps and no pre-conditioning. This method was validated with good linearity (R² > 0.99 in 1.0-500.0 ng mL^-1 range), excellent accuracy (90% -110%) and precision (RSD % value less than 15%) in pooled human plasma samples (N = 3). The limits of quantitation (LOQ) for TCAs in plasma samples were between 1.0-5.0 ng mL^-1 which are lower than the therapeutic ranges of these drugs. Kinetic and isotherm studies showed the superior performance of MIP sorbent compared to a non-imprinted polymer (NIP) sorbent in extracting TCAs from a bovine serum albumin (BSA) solution. The optimized and validated method for pooled human plasma was utilized for monitoring the concentration of TCAs in three patient samples who had been prescribed TCAs. These selective single-use thin film extraction devices are promising for efficient and fast procedures for analyzing biological samples.

Development and Validation of a Chiral Liquid Chromatographic Assay for Enantiomeric Separation and Quantification of Verapamil in Rat Plasma: Stereoselective Pharmacokinetic Application

A novel, fast and sensitive enantioselective HPLC assay with a new core-shell isopropyl carbamate cyclofructan 6 (superficially porous particle, SPP) chiral column (LarihcShell-P, LSP) was developed and validated for the enantiomeric separation and quantification of verapamil (VER) in rat plasma. The polar organic mobile phase composed of acetonitrile/methanol/trifluoroacetic acid/triethylamine (98:2:0.05: 0.025, v/v/v/v) and a flow rate of 0.5 mL/min was applied. Fluorescence detection set at excitation/emission wavelengths 280/313 nm was used and the whole analysis process was within 3.5 min, which is 10-fold lower than the previous reported HPLC methods in the literature. Propranolol was selected as the internal standard. The S-(-)- and R-(+)-VER enantiomers with the IS were extracted from rat plasma by utilizing Waters Oasis HLB C18 solid phase extraction cartridges without interference from endogenous compounds. The developed assay was validated following the US-FDA guidelines over the concentration range of 1-450 ng/mL (r2 ≥ 0.997) for each enantiomer (plasma) and the lower limit of quantification was 1 ng/mL for both isomers. The intra- and inter-day precisions were not more than 11.6% and the recoveries of S-(-)- and R-(+)-VER at all quality control levels ranged from 92.3% to 98.2%. The developed approach was successfully applied to the stereoselective pharmacokinetic study of VER enantiomers after oral administration of 10 mg/kg racemic VER to Wistar rats. It was found that S-(-)-VER established higher Cmax and area under the concentration-time curve (AUC) values than the R-(+)-enantiomer. The newly developed approach is the first chiral HPLC for the enantiomeric separation and quantification of verapamil utilizing a core-shell isopropyl carbamate cyclofructan 6 chiral column in rat plasma within 3.5 min after solid phase extraction (SPE).

Simultaneous determination by UHPLC-PDA of major capsaicinoids and capsinoids contents in peppers

Capsaicinoids and capsinoids compounds have been a focus of special attention for their health benefits. An effective and rapid Ultra-High-Performance Liquid Chromatography (UHPLC-PDA) method has been developed and validated for the simultaneous separation and quantitative determination of the major capsaicinoids and capsinoids present in peppers. The separation of all the compounds of interest was achieved in less than 2 min by means of an ACQUITY UPLC BEH rp-C18 column (100 mm × 2.1 mm i.d., 1.7 µm particle size). The variables that have been optimized are the mobile phase (water as solvent A and acetonitrile as solvent B, both acidified by adding 0.1% acetic acid), separation gradient, column temperature (35-70 °C), flow rate (0.6-0.95 mL min^-1), and injection volume (2.5-3.5 µL). The evaluation of the chromatographic performance revealed excellent resolution, retention factor, and selectivity. The method was satisfactorily validated in terms of linearity, detection and quantification limits, precision, and robustness.

Approaches in metabolomics for regulatory toxicology applications

Innovative methodological approaches are needed to conduct human health and environmental risk assessments on a growing number of marketed chemicals. Metabolomics is progressively proving its value as an efficient strategy to perform toxicological evaluations of new and existing substances, and it will likely become a key tool to accelerate chemical risk assessments. However, additional guidance with widely accepted and harmonized procedures is needed before metabolomics can be routinely incorporated in decision-making for regulatory purposes. The aim of this review is to provide an overview of metabolomic strategies that have been successfully employed in toxicity assessment as well as the most promising workflows in a regulatory context. First, we provide a general view of the different steps of regulatory toxicology-oriented metabolomics. Emphasis is put on three key elements: robustness of experimental design, choice of analytical platform, and use of adapted data treatment tools. Then, examples in which metabolomics supported regulatory toxicology outputs in different scenarios are reviewed, including chemical grouping, elucidation of mechanisms of toxicity, and determination of points of departure. The overall intention is to provide insights into why and how to plan and conduct metabolomic studies for regulatory toxicology purposes.