Separation and determination of arsenic species in water by selective exchange and hybrid resins

Ionic Liquid Modified Polymer Gel for Arsenic Speciation

A new ionic liquid modified polymer gel containing methylimidazolium groups (poly(MIA)) is proposed as a sorbent for the separation and enrichment of trace inorganic and organic arsenic species in surface waters. The poly(MIA) was synthesized by chemical modification of polymeric precursor using post-polymerization modification of poly(glycidyl methacrylate-co-trimethylolpropane trimethacrylate). The composition, structure, morphology, and surface properties of the prepared particles were characterized using elemental analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption-desorption measurements. Optimization experiments showed that at pH 8, monomethylarsonic acid (MMAs), dimethylarsinic acid (DMAs), and As(V) were completely retained on the poly(MIA), while the sorption of As(III) was insignificant. The desorption experiments revealed that due to the weaker binding of organic arsenic species, selective elution with 1 mol/L acetic acid for MMAs + DMAs, followed by elution with 2 mol/L hydrochloric acid for As(V), ensured their quantitative separation. The adsorption kinetic and mechanism were defined. The analytical procedure for As(III), As(V), MMAs, and DMAs determination in surface waters was developed and validated through the analysis of certified reference material.

Polymeric Materials in Speciation Analysis Based on Solid-Phase Extraction

Speciation analysis is a relevant topic since the (eco)toxicity, bioavailability, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). The reliability of analytical results for chemical species of elements depends mostly on the maintaining of their stability during the sample pretreatment step and on the selectivity of further separation step. Solid-phase extraction (SPE) is a matter of choice as the most suitable and widely used procedure for both enrichment of chemical species of elements and their separation. The features of sorbent material are of great importance to ensure extraction efficiency from one side and selectivity from the other side of the SPE procedure. This review presents an update on the application of polymeric materials in solid-phase extraction used in nonchromatographic methods for speciation analysis.

Recent Review on Selected Xenobiotics and Their Impacts on Gut Microbiome and Metabolome

As it is well known, the gut is one of the primary sites in any host for xenobiotics, and the many microbial metabolites responsible for the interactions between the gut microbiome and the host. However, there is a growing concern about the negative impacts on human health induced by toxic xenobiotics. Metabolomics, broadly including lipidomics, is an emerging approach to studying thousands of metabolites in parallel. In this review, we summarized recent advancements in mass spectrometry (MS) technologies in metabolomics. In addition, we reviewed recent applications of MS-based metabolomics for the investigation of toxic effects of xenobiotics on microbial and host metabolism. It was demonstrated that metabolomics, gut microbiome profiling, and their combination have a high potential to identify metabolic and microbial markers of xenobiotic exposure and determine its mechanism. Further, there is increasing evidence supporting that reprogramming the gut microbiome could be a promising approach to the intervention of xenobiotic toxicity.

Characterisation of kapok fibre's biochar for arsenate adsorption removal from aqueous solution

Al-KBC was produced through the simple pyrolysis of Al-modified kapok fibres at high temperatures. Using the N₂ adsorption Brunauer Emmett Teller (BET) process, Fourier transforms infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), the energy-dispersive X-ray spectroscopy (EDS) spectroscopy, and X-ray photoelectron spectroscopy (XPS), the sorbent changes and characteristics were analysed. As a result of Al's addition to the fibre's surface, Al-KBC exhibited superior As(V) adsorption performance compared to KBC due to better pore structures. Experiments on the kinetics of As(V) adsorption revealed that the adsorption followed the pseudo-second-order model and that intradiffusion was not the only factor governing the adsorption. Experiments with isotherms indicated that the adsorption mechanism corresponded to the Langmuir model, and the adsorption capacity Q_m of Al-KBC at 25 °C was 483 μg/g. The thermodynamic experiments suggested that the adsorption reactions were spontaneous endothermic with a random approach at the adsorption interface. 25 mg/L of coexisting ions such as sulphate and phosphate reduced the sorbent As(V) removal ability to 65% and 39%. After seven cycles of adsorption/desorption, Al-KBC demonstrated satisfactory performance in terms of reusability, adsorbing 53% of 100 μg/L As(V) from the water. This novel BC can probably be used as a filter to purify groundwater with high As(V) concentration in the rural zone.

Groundwater arsenic contamination: impacts on human health and agriculture, ex situ treatment techniques and alleviation

Groundwater is consumed by a large number of people as their primary source of drinking water globally. Among all the countries worldwide, nations in South Asia, particularly India and Bangladesh, have severe problem of groundwater arsenic (As) contamination so are on our primary focus in this study. The objective of this review study is to provide a viewpoint about the source of As, the effect of As on human health and agriculture, and available treatment technologies for the removal of As from water. The source of As can be either natural or anthropogenic and exposure mediums can either be air, drinking water, or food. As-polluted groundwater may lead to a reduction in crop yield and quality as As enters the food chain and disrupts it. Chronic As exposure through drinking water is highly associated with the disruption of many internal systems and organs in the human body including cardiovascular, respiratory, nervous, and endocrine systems, soft organs, and skin. We have critically reviewed a complete spectrum of the available ex situ technologies for As removal including oxidation, coagulation-flocculation, adsorption, ion exchange, and membrane process. Along with that, pros and cons of different techniques have also been scrutinized on the basis of past literatures reported. Among all the conventional techniques, coagulation is the most efficient technique, and considering the advanced and emerging techniques, electrocoagulation is the most prominent option to be adopted. At last, we have proposed some mitigation strategies to be followed with few long and short-term ideas which can be adopted to overcome this epidemic.

Recovery of Metals from Wastewater-State-of-the-Art Solutions with the Support of Membrane Technology

This paper discusses the most important research trends in the recovery of metals from industrial wastewater using membrane techniques in recent years. Particular attention is paid to the preparation of new membranes with the required filtration and separation properties. At the same time, possible future applications are highlighted. The aspects discussed are divided into metals in order to clearly and comprehensibly list the most optimal solutions depending on the composition of the wastewater and the possibility of recovering valuable components (metalloids, heavy metals, and platinum group metals). It is shown that it is possible to effectively remove metals from industrial wastewater by appropriate membrane preparation (up to ~100%), including the incorporation of functional groups, nanoparticles on the membrane surface. However, it is also worth noting the development of hybrid techniques, in which membrane techniques are one of the elements of an effective purification procedure.

Spatial pattern of groundwater arsenic contamination in Patna, Saran, and Vaishali districts of Gangetic plains of Bihar, India

Groundwater is an essential source of drinking as well as irrigation water. It has recently become a significant challenge to maintain good and safe drinking water for all living beings. The continuous supply of arsenic detected in groundwater poses a severe health problem and has adverse effects on humans and the ecosystem. Researchers also identified arsenic contamination globally across various regions. However, a few studies also identified that the groundwater of Patna, Saran, and Vaishali districts of Bihar is intoxicated by arsenic. To assess the toxic level of arsenic in groundwater, samples from various GPS-based pointed locations were collected from the study area using a GARMIN GPS device. The total concentration of arsenic in drinking water (mostly traces of arsenic, level of μg L-1 or less) can be detected only by sophisticated analytical techniques such as ICP-MS, GF-AAS, and HG-AAS. The standard procedures were followed to determine quality attributes in groundwater. Arsenic contamination persists in most areas and exceeds the permissible limits prescribed by the World Health Organization (WHO), negatively impacting the health of more than 10 million people in the state. The 90.47% and 85.71% groundwater samples of the study area exceeded the permissible limit of the WHO (0.01 mg L-1) and Bureau of Indian Standards (BIS (0.05 mg L-1), respectively. The analyzed data was obtained, and variability was noticed in total arsenic concentrations ranging from 0.002 to 7.801 mg L-1, with a mean value of 0.87 mg L-1. Similarly, the water quality attribute like total dissolved solids were identified in 14.28% of samples, which crossed 201 to 1026 mg L-1, with a mean value of 375.33 mg L-1.

Fast arsenate As(V) adsorption and removal from water using aluminium Al(III) fixed on Kapok fibres

Arsenic (As) is among the most dangerous metalloids and is harmful to human wellbeing. In this laboratory study, Al(III)-modified kapok fibres (Al-Kapok) were used to remove As(V) from water. The sorbent was characterised using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX). Batch experiments were performed to observe the performance of Al-Kapok in the removal of As(V) and to examine the effects of pH, temperature, adsorbent dose, and coexisting ions on the adsorption process. The surface of the sorbent changed after aluminium modification, and the results of the batch experiments showed that the adsorption of As(V) occurred mainly via endothermic-spontaneous chemisorption at the solution and solid interface of Al-Kapok. The As(V) removal efficiency was approximately 76%-84%, and it was slightly affected at pH levels below 8.0. Further study showed that the maximum adsorption capacity of Al-Kapok for As(V) was 118 μg/g at 30 °C and pH 6, and notable adverse effects were caused by the presence of SO₄^2-and PO₄^3-. It was also found that the boundary layer and film diffusion contributed more to As(V) adsorption. After five adsorption/desorption cycles, regeneration recovered approximately 92% of the adsorption capacity of Al-Kapok used. Overall, Al-Kapok appears to be a suitable adsorbent material for the purification of As-contaminated water.

Activated Carbons for Arsenic Removal from Natural Waters and Wastewaters: A Review

The arsenic pollution of waters and wastewaters is concerning many countries across the world, and because of the effects of arsenic on human health, its removal from waters is of great importance. Adsorption using functionalized activated carbons as a technique for the removal of arsenic from water streams has gained great attention. In the present review, we summarize synthesis technologies, the characterization of materials and arsenic removal capacity, and we clarify the parameters which play a critical role in the removal of arsenic, such as the pH value of the water, the active group in the functionalization and temperature. The review article concludes that most of the experimental data fit both Langmuir and Freundlich isotherms. In this review, the recyclability and reuse of the materials are also reported, and the findings show that for both arsenite and arsenate, even after several adsorption cycles, the material can be further used as an efficient adsorbent for arsenic removal.

A new method for highly efficient separation and determination of arsenic species in natural water using silica modified with polyamines

A simple and highly efficient method for the determination of highly toxic arsenic species using non-covalently aminated silica is proposed. The polyamines including poly(hexamethyleneguanidine), poly(4,9-dioxadodecane-1,12-guanidine), hexadimethrine, and poly(diallyldimethylammonium) were tested as silica modifiers. The prepared adsorbents allow effective preconcentration of anionic species of arsenic from aqueous solutions. It was found that As(V) can be quantitatively extracted from solutions at pH 4.5-7.0 by the anion exchange mechanism in less than 5 min, while neutral at this pH As(III) was not adsorbed at these conditions. A reaction with 2,3-dimercapto-1-propanesulphonic acid, which resulted in the formation of the negatively charged complex of As(III) with adsorbents was used for its quantitative extraction from solutions with a pH of 3.5-6.5. A system of two cartridges filled with poly(diallyldimethylammonium) modified silica and the on-line reaction of As(III) with 2,3-dimercapto-1-propanesulphonic acid proceeding between the cartridges was used for separate preconcentration and determination of As(V) and As(III) at pH 5. The proposed method was used for four-year monitoring of natural water pollution by arsenic in the area of residence of the indigenous peoples of Tyva Republic (Russia).

Differentiating Nanomaghemite and Nanomagnetite and Discussing Their Importance in Arsenic and Lead Removal from Contaminated Effluents: A Critical Review

Arsenic and lead heavy metals are polluting agents still present in water bodies, including surface (lake, river) and underground waters; consequently, the development of new adsorbents is necessary to uptake these metals with high efficiency, quick and clean removal procedures. Magnetic nanoparticles, prepared with iron-oxides, are excellent candidates to achieve this goal due to their ecofriendly features, high catalytic response, specific surface area, and pulling magnetic response that favors an easy removal. In particular, nanomagnetite and maghemite are often found as the core and primary materials regarding magnetic nanoadsorbents. However, these phases show interesting distinct physical properties (especially in their surface magnetic properties) but are not often studied regarding correlations between the surface properties and adsorption applications, for instance. Thus, in this review, we summarize the main characteristics of the co-precipitation and thermal decomposition methods used to prepare the nano-iron-oxides, being the co-precipitation method most promising for scaling up processes. We specifically highlight the main differences between both nano-oxide species based on conventional techniques, such as X-ray diffraction, zero and in-field Mössbauer spectroscopy, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and X-ray magnetic circular dichroism, the latter two techniques performed with synchrotron light. Therefore, we classify the most recent magnetic nanoadsorbents found in the literature for arsenic and lead removal, discussing in detail their advantages and limitations based on various physicochemical parameters, such as temperature, competitive and coexisting ion effects, i.e., considering the simultaneous adsorption removal (heavy metal-heavy metal competition and heavy metal-organic removal), initial concentration, magnetic adsorbent dose, adsorption mechanism based on pH and zeta potential, and real water adsorption experiments. We also discuss the regeneration/recycling properties, after-adsorption physicochemical properties, and the cost evaluation of these magnetic nanoadsorbents, which are important issues, but less discussed in the literature.

N-compounds speciation analysis in environmental samples using ultrasound-assisted solid-liquid extraction and non-chromatographic techniques

A fast, efficient, and non-chromatographic method was presented in this study for nitrite, nitrate, and p-nitrophenol (N-compounds) extraction and speciation analysis of environmental samples. By applying ultrasound-assisted solid-liquid extraction (USLE), analytes were efficiently extracted from water, soil, or sediment collected in areas of environmental disaster. These analytes were selectively converted to NO_(g) through UV photolysis (NO₃^-), H₂O₂/UV photocatalysis (PNP), and direct conversion (NO₂^-). Following conversion, NO_(g) was separated from the liquid phase and determined by high-resolution continuum source molecular absorption spectrometry (HR-CS MAS). The LODs obtained were 0.097 ± 0.004 mg L^-1 for nitrite, 0.119 ± 0.004 mg L^-1 for nitrate, and 0.090 ± 0.006 mg L^-1 for p-nitrophenol. On applying this speciation method to environmental samples, concentrations were found to be up to 0.99 ± 0.03 mg L^-1 (NO₂^-), 49.80 ± 2.5 mg L^-1 (NO₃^-), and 0.10 ± 0.02 mg L^-1 (PNP). Finally, addition/recovery study of real water, soil, and sediment samples showed 101 ± 2% recovery for NO₂^-, 100 ± 1% for NO₃^-, and 96 ± 5% for PNP.

Comparative study of arsenic removal by iron-based nanomaterials: Potential candidates for field applications

Graphene oxide supported magnetite (GM) and graphene oxide supported nanoscale zero-valent iron (GNZVI) nanohybrids were compared for arsenic removal at a wide pH range (3-9). While already published work reported high process efficiency for GM and GNZVI, they cannot be compared one-on-one given the non-identical experimental conditions. Each researcher team used different initial arsenic concentration, solution pH, and adsorbent dose. This study evaluated GM and GNZVI, bare magnetite (M), and bare nanoscale zero-valent iron (NZVI) for aqueous arsenic removal under similar experimental conditions. GNZVI worked more efficiently (>90%) in a wide pH range (3-9) for both As(III) and As(V), while GM was efficient (>90%) only at pH 3 for As(V) and As(III) removal was maximum of ~80% at pH 9. GNZVI also exhibited better aqueous dispersibility with a zeta potential of -21.02 mV compared to other adsorbents in this experiment. The arsenic removal based on normalized iron content indicated that the nanohybrids recorded improved arsenic removal compare to bare nanoparticles, and GNZVI worked the best. In NZVI-based nanomaterials (GNZVI and NZVI), electrostatic attraction played a limited role while surface complexation was dominant in removal of both the arsenic species. In case of M-based nanomaterials (GM and M), As(V) removal was controlled by electrostatic attraction while As(III) adsorption was ligand exchange and surface complexation. GNZVI has the potential for field application for drinking water arsenic removal.

Enhanced Arsenic(V) Removal on an Iron-Based Sorbent Modified by Lanthanum(III)

Modification of a commercial iron oxide ion exchanger (Arsen X^np) was carried out to enhance the removal of arsenic(V) ions. The modification consisted of the adsorption of lanthanum(III) ions on the Arsen X^np surface. After adsorption, the material was dried at 313 K to obtain the modified ion exchanger Arsen X^np-La(III). The modification process itself was tested for optimal pH, kinetics, and equilibrium adsorption isotherm study. Accurate sorbent characteristics were made using, among others, SEM, FTIR, and nitrogen adsorption/desorption isotherms. Then, various tests were carried out to compare the adsorption properties of the modified and unmodified material. It turned out that the tested material was able to completely remove arsenic from an aqueous solution with an initial concentration of up to 50 mg/dm³. Without modification, it was not possible to reach the WHO recommended 10 μg/dm³ arsenic limit even at an initial concentration of 25 mg/dm³. Moreover, the maximum sorption capacity increased from 22.37 to 61.97 mg/g after modification (3 times greater than before modification). It is worth noting that the process of removing arsenic on Arsen X^np-La(III) is fast—equilibrium is reached after about 120 min. Under almost neutral conditions, precipitation and adsorption can be the main mechanisms of As(V) removal. After modification, the removal capacity was enhanced by the co-precipitation and adsorption by exchange of the OH– group with arsenic ions. Such La(III) based adsorbent can be successfully applied in wastewater purification and displays superior performance for removing arsenic.

Automated Determination of As(III) in Waters with an Electrochemical Sensor Integrated into a Modular Microfluidic System

The presence of high levels of arsenic in waters poses a threat to the human health in many countries all over the world. Effective surveillance programs of water quality require the implementation of in-field tests to assess early the presence of this metal ion and other contaminants. To date, there exist few market-available analytical approaches that suffer from important limitations related to cost, in addition to complex reactions, very long analysis times, and/or high limits of detection. This work describes a robust electrochemical sensor integrated into a modular microfluidic system that shows a clear potential to be deployed for the on-site monitoring of inorganic As(III) species. Flexible and transparent microfluidic modules are fabricated by rapid prototyping techniques and include different microfluidic components among them, flow cells where electrochemical sensors can be easily and reversibly inserted. The electrochemical sensor comprises a gold nanoparticle (AuNP)-modified gold thin-film electrode that is readily applied to the sensitive detection of As(III) by anodic stripping linear sweep voltammetry. The microfluidic system enables the automatic sensor calibration, sample uptake, and preconditioning as well as As(III) detection. The system response to As(III) is linear in a concentration range of 1-150 μg L^-1, with a detection limit of 0.42 μg L^-1, which is well below the threshold value of 10 μg L^-1 set by the World Health Organization. Analysis of tap water and two water samples from two Argentinean aquifers, spiked with different As(III) concentrations, demonstrates the excellent performance of the system.

Efficient multistep arsenate removal onto magnetite modified fly ash

The modification of the fly ash (FA) by magnetite (M) was performed to obtain FAM adsorbent with improved adsorption efficiency for arsenate removal from water. The novel low cost adsorbents are characterized by liquid nitrogen porosimetry (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD), Mössbauer spectroscopy (MB) and Fourier transform infrared (FTIR) spectroscopy. The optimal conditions and key factors influencing the adsorbent synthesis are assessed using the response surface method (RSM). The adsorption experiment was carried out in a batch system by varying the contact time, temperature, pH, and mass of the adsorbent. The adsorption capacity of the FAM adsorbent for As(V), calculated by Langmuir model, was 19.14 mg g^-1. The thermodynamic parameters showed spontaneity of adsorption with low endothermic character. The kinetic data followed the pseudo-second-order kinetic model (PSO), and Weber-Morris model indicated intra-particle diffusion as rate limiting step. Alternative to low desorption capability of the FAM was found by five consecutive adsorption/magnetite precipitation processes which gave exhausted layered adsorbent with 65.78 mg g^-1 capacity. This research also has shed light on the mechanism of As(V)-ion adsorption, presenting a promising solution for the valorization of a widely abundant industrial waste.

The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent

This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn²⁺, Pb²⁺ and As(V)), followed by the revalorization of the exhausted adsorbent. The granulometric, elemental analysis, point of zero charge (pH_PZC), radiochemical and structural characterization were conducted using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and gamma spectrometry techniques. The optimal conditions and key factors influencing the adsorption process were assessed using the response surface method (RSM). The adsorption capacity of the MFA adsorbent for Zn²⁺, Pb²⁺ and As(V) removal, calculated by the Langmuir model, was found to be 33.13, 26.06, and 29.71 mg g^-1, respectively. The kinetic and thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. Due to their low desorption potential of the exhausted adsorbents, their effective reuse was established to be feasible. For this reason, the valorization of this material as an additive in construction materials was thereafter studied, where testing its toxicity leaching (TCLP) as well as the mechanical properties of construction material containing exhausted MFA confirmed its safe use. Hence, this study points to a possible "two-in-one" reuse of coal ash, initially as an adsorbent and later as an additive in a construction material.

Arsenic removal from water and river water by the combined adsorption - UF membrane process

In this study, a pilot-scale adsorption-UF process equipped with an aerated system is established for arsenic removal from As-spiked Songhua river water. A newly synthesized amino-functionalized coffee cellulose adsorbent (PEI-coffee) which is derived from spent coffee powder is fully characterized and used for arsenic removal from water. The batch experiments revealed that the adsorption process could be well described by Langmuir model with a maximum adsorption capacity of 13.2 and 46.1 mg/g for As(III) and As(V), respectively. The negative value of △H and △G indicated the exothermic and spontaneous nature of As adsorption on PEI-coffee. The effects of operating parameters such as pH, initial concentration and adsorbent dosage, were optimized by response surface methodology (RSM) based on a central composite design (CCD). The combined adsorption - UF process was employed for arsenic removal from As-spiked Songhua river water. It was demonstrated that aeration not only increased the removal efficiency by oxidizing As(III) to As(V), but mitigated the membrane fouling process. Besides of the adsorption process, UF membrane could also reject arsenic through the electrostatic repulsion between arsenic species and membrane surface. After UF filtration, the dissolved As, suspended solids (SS), and TOC can be effectively eliminated. The saturated adsorbent was regenerated by using an eluting agent of 10 wt% NaCl and 10 wt% NaOH, the regenerated adsorbent still sustained a very high adsorption capacity after 6 cycles of adsorption-regeneration process.

Speciation of As in environmental samples using the nano-TiO2/PCHG-FAAS online system

This work presents an alternative method for arsenic speciation using the nano-TiO₂ hydride generation photocatalytic hydride generation (PCHG) system, which is easily separated from the medium. Nano-TiO₂ was studied as photocatalyst to reduction of arsenic species by UV-induced with formic acid and atomic absorption detection of different forms of arsenic [As (III), As (V), dimethylarsinic acid (DMA)] in environmental samples (water, sediment and plant). The effect of the average pH, the organic acid concentration, the ultraviolet irradiation time and their amount were investigated. With the presence of formic acid, the process was more effective in the reduction of arsenic when compared to other organic acids, mainly acetic acid. In addition, the photocatalytic hydride generation and flame atomic absorption spectrometry (nano-TiO₂/PCHG-FAAS) increased the identification and quantification of different arsenic species. The ultrasound extraction procedure was used as a method to prepare samples with solutions of 1.0 mol L^-1 phosphoric acid. The accuracy of the measurements (n = 12), calculated as relative standard deviation, was less than 8.6%. The detection limits for As (III) and As (total) in samples were 0.418 and 0.574 μg g^-1, respectively.

Determination of inorganic arsenic in algae using bromine halogenation and on-line nonpolar solid phase extraction followed by hydride generation atomic fluorescence spectrometry

Accurate, stable and fast analysis of toxic inorganic arsenic (iAs) in complicated and arsenosugar-rich algae matrix is always a challenge. Herein, a novel analytical method for iAs in algae was reported, using bromine halogenation and on-line nonpolar solid phase extraction (SPE) followed by hydride generation atomic fluorescence spectrometry (HG-AFS). The separation of iAs from algae was first performed by nonpolar SPE sorbent using Br^- for arsenic halogenation. Algae samples were extracted with 1% perchloric acid. Then, 1.5mL extract was reduced by 1% thiourea, and simultaneously reacted (for 30min) with 50μL of 10% KBr for converting iAs to AsBr₃ after adding 3.5mL of 70% HCl to 5mL. A polystyrene (PS) resin cartridge was employed to retain arsenicals, which were hydrolyzed, eluted from the PS resin with H₂O, and categorized as iAs. The total iAs was quantified by HG-AFS. Under optimum conditions, the spiked recoveries of iAs in real algae samples were in the 82-96% range, and the method achieved a desirable limit of detection of 3μgkg^-1. The inter-day relative standard deviations were 4.5% and 4.1% for spiked 100 and 500μgkg^-1 respectively, which proved acceptable for this method. For real algae samples analysis, the highest presence of iAs was found in sargassum fusiforme, followed by kelp, seaweed and laver.

Arsenic and antimony in water and wastewater: overview of removal techniques with special reference to latest advances in adsorption

Arsenic and antimony are metalloids, naturally present in the environment but also introduced by human activities. Both elements are toxic and carcinogenic, and their removal from water is of unquestionable importance. The present article begins with an overview of As and Sb chemistry, distribution and toxicity, which are relevant aspects to understand and develop remediation techniques. A brief review of the recent results in analytical methods for speciation and quantification was also provided. The most common As and Sb removal techniques (coagulation/flocculation, oxidation, membrane processes, electrochemical methods and phyto and bioremediation) are presented with discussion of their advantages, drawbacks and the main recent achievements. Literature review on adsorption and biosorption were focused in detail. Considering especially the case of developing countries or rural communities, but also the finite energy resources that over the world are still dependent, recent research have focused especially readily available low-cost adsorbents, as minerals, wastes and biosorbents. Many of these alternative sorbents have been presenting promising results and can be even superior when compared to the commercial ones. Sorption capacities were accurately compiled for As(III,V) and Sb(III,V) species in order to provide to the reader an easy but detailed comparison. Some aspects related to experimental conditions, comparison criteria, lack of research studies, economic aspects and adsorption mechanisms were critically discussed.

Automated system for on-line determination of dimethylarsinic and inorganic arsenic by hydride generation-atomic fluorescence spectrometry

A multisyringe flow-injection approach has been coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS) with UV photo-oxidation for dimethylarsinic (DMA), inorganic As and total As determination, depending on the pre-treatment given to the sample (extraction or digestion). The implementation of a UV lamp allows on-line photo-oxidation of DMA and the following arsenic detection, whereas a bypass leads the flow directly to the HG-AFS system, performing inorganic arsenic determination. DMA concentration is calculated by the difference of total inorganic arsenic and measurement of the photo-oxidation step. The detection limits for DMA and inorganic arsenic were 0.09 and 0.47 μg L(-1), respectively. The repeatability values accomplished were of 2.4 and 1.8%, whereas the injection frequencies were 24 and 28 injections per hour for DMA and inorganic arsenic, respectively. This method was validated by means of a solid reference material BCR-627 (muscle of tuna) with good agreement with the certified values. Satisfactory results for DMA and inorganic arsenic determination were obtained in several water matrices. The proposed method offers several advantages, such as increasing the sampling frequency, low detection limits and decreasing reagents and sample consumption, which leads to lower waste generation.