Electroanalysis of antitubercular drugs in pharmaceutical dosage forms and biological fluids: A review

New approaches in antibiotics detection: The use of square wave voltammetry

Antibiotics belongs to a class of pharmaceutical compounds widely used due to their effectiveness against bacterial infections. However, if consumed or inappropriately disposed of in the environment can results in environmental and public health problems, because they are considered emerging contaminants and their residues represent damage, whether in the long or short term, to different terrestrial ecosystems, in addition to bringing potential risks to agricultural sectors, such as livestock and fish farming. For this, the development of analytical methods for low-concentration detection and identification of antibiotics in natural waters, wastewaters, soil, foods, and biological fluids is necessary. This review shows the applicability of square wave voltammetry for the analytical determination of antibiotics from different chemical classes and covers a variety of samples and working electrodes that are used as voltammetric sensors. The review involved the analysis of scientific publications from the Science Direct® and Scopus® databases, with scientific manuscripts covering the period between January 2012 and May 2023. Various manuscripts were discussed indicating the applicability of square wave voltammetry in antibiotics detection in urine, blood, natural waters, milk, among other complex samples.

Glutathione-ascorbic acid-functionalized molybdenum oxide quantum dots-based fluorescent sensor for the detection of isoniazid drug in pharmaceutical samples

Herein, glutathione-ascorbic acid-functionalized molybdenum oxide quantum dots (GSH-AA-MoO_x QDs) are synthesized by the conventional method and used as a fluorescent probe for the rapid detection of isoniazid drug in pharmaceutical samples. Ascorbic acid and glutathione are used as surface ligands for the modification of MoO_x QDs. The as-synthesized GSH-AA-MoO_x QDs display λ_Em at 416 nm when applied λ_Ex at 330 nm. The introduction of isoniazid drug into GSH-AA-MoO_x QDs solution results the assembly of GSH-AA-MoO_x QDs-isoniazid nanoarchitectures, leading to quench λ_Em at 416 nm. Thus, GSH-AA-MoO_x QDs can work as a fluorescent sensor for the rapid identification of isoniazid in real samples. The as-prepared GSH-AA-MoO_x QDs not only allows superior analytical features (rapidity, and selectivity) toward isoniazid with the detection limit of 94 nM, but also displays fluorescence "turn-off" response for assaying of isoniazid in real samples (pharmaceutical and biofluids). Finally, GSH-AA-MoO_x QDs are highly promising fluorescent probe for the rapid detection of isoniazid in real samples.

State of the Art on Developments of (Bio)Sensors and Analytical Methods for Rifamycin Antibiotics Determination

This review summarizes the literature data reported from 2000 up to the present on the development of various electrochemical (voltammetric, amperometric, potentiometric and photoelectrochemical), optical (UV-Vis and IR) and luminescence (chemiluminescence and fluorescence) methods and the corresponding sensors for rifamycin antibiotics analysis. The discussion is focused mainly on the foremost compound of this class of macrocyclic drugs, namely rifampicin (RIF), which is a first-line antituberculosis agent derived from rifampicin SV (RSV). RIF and RSV also have excellent therapeutic action in the treatment of other bacterial infectious diseases. Due to the side-effects (e.g., prevalence of drug-resistant bacteria, hepatotoxicity) of long-term RIF intake, drug monitoring in patients is of real importance in establishing the optimum RIF dose, and therefore, reliable, rapid and simple methods of analysis are required. Based on the studies published on this topic in the last two decades, the sensing principles, some examples of sensors preparation procedures, as well as the performance characteristics (linear range, limits of detection and quantification) of analytical methods for RIF determination, are compared and correlated, critically emphasizing their benefits and limitations. Examples of spectrometric and electrochemical investigations of RIF interaction with biologically important molecules are also presented.

An ultrasensitive electrochemical sensing platform based on silver nanoparticle-anchored 3D reduced graphene oxide for rifampicin detection

A facile strategy has been reported to anchor silver nanoparticles (Ag NPs) onto three-dimensional reduced graphene oxide (3D rGO) via a green and simple method. An accurate and reliable electrochemical sensing platform based on Ag NPs/3D rGO was designed for the ultrasensitive detection of rifampicin (RIF). The morphology and features of Ag NPs/3D rGO were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy and electrochemical measurements. The interface of the modified electrode presented effective electrical activity for the analysis of RIF due to the large electrochemically active surface area and excellent electron transport ability. The sensor exhibited a good linear relationship in the range of 0.01 nM-45 μM and a low detection limit of 0.810 nM (S/N = 3). Crucially, the fabricated Ag NPs/3D rGO sensor was successfully utilized to assess RIF in human blood, drug and aquatic product samples. This sensing platform exhibited outstanding electrochemical performance for RIF detection and showed great potential application in clinical diagnosis, pharmaceutical and food-related fields.

Enhanced Photoelectrochemical Detection of an Analyte Triggered by Its Concentration by a Singlet Oxygen-Generating Fluoro Photosensitizer

The use of a photocatalyst (photosensitizer) which produces singlet oxygen instead of enzymes for oxidizing analytes creates opportunities for designing cost-efficient and sensitive photoelectrochemical sensors. We report that perfluoroisopropyl-substituted zinc phthalocyanine (F₆₄PcZn) interacts specifically with a complex phenolic compound, the antibiotic rifampicin (RIF), but not with hydroquinone or another complex phenolic compound, the antibiotic doxycycline. The specificity is imparted by the selective preconcentration of RIF in the photocatalytic layer, as revealed by electrochemical and optical measurements, complemented by molecular modeling that confirms the important role of a hydrophobic cavity formed by the iso-perfluoropropyl groups of the photocatalyst. The preconcentration effect favorably enhances the RIF photoelectrochemical detection limit as well as sensitivity to nanomolar (ppb) concentrations, LOD = 7 nM (6 ppb) and 2.8 A·M^-1·cm^-2, respectively. The selectivity to RIF, retained in the photosensitizer layer, is further enhanced by the selective removal of all unretained phenols via simple washing of the electrodes with pure buffer. The utility of the sensor for analyzing municipal wastewater was demonstrated. This first demonstration of enhanced selectivity and sensitivity due to intrinsic interactions of a molecular photocatalyst (photosensitizer) with an analyte, without use of a biorecognition element, may allow the design of related, robust, simple, and viable sensors.

Simultaneous detection of ethambutol and pyrazinamide with IL@CoFe2O4NPs@MWCNTs fabricated glassy carbon electrode

For the first time, we report a novel electrochemical sensor for the simultaneous detection of ethambutol (ETB) and pyrazinamide (PZM) using 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim][BF₄]) ionic liquid (IL) assimilated with multiwalled carbon nanotubes (MWCNTs) decorated cobalt ferrite nanoparticles (CoFe₂O₄NPs) on the surface of glassy carbon electrode (GCE). The surface morphological and electrochemical properties of the IL@CoFe₂O₄NPs@MWCNTs was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR) and cyclic voltammetry (CV), differential pulse voltammetry (DPV) respectively. Moreover, the obtained results of CV demonstrated that the 9-folds enhancement in the electrochemical signals was achieved with IL@CoFe₂O₄NPs@MWCNTs@GCE compared to that of a bare GCE. Additionally, the simultaneous electrochemical detection of ETB and PZM was successfully accomplished using IL@CoFe₂O₄NPs@MWCNTs over a wide-range of concentration with good limit of detection (3S/m) of 0.0201 and 0.010 μM respectively. The findings of this study identify IL@CoFe₂O₄NPs@MWCNTs@GCE has promising abilities of simultaneous detection of ETB and PZM in pharmaceutical formulations.

Electroanalysis of isoniazid and rifampicin: Role of nanomaterial electrode modifiers

Thanks to operational simplicity, speediness, possibility of miniaturization and real-time nature, electrochemical sensing is a supreme alternative for non-electrochemical methodologies in drug quantification. This review, highlights different nanotech-based sensory designs for electroanalysis of isoniazid and rifampicin, the most important medicines for patients with tuberculosis. We first, concisely mention analyses with bare electrodes, associated impediments and inspected possible strategies and then critically review the last two decades works with focus on different nano-scaled electrode modifiers. We organized and described the materials engaged in several categories: Surfactants modifiers, polymeric modifiers, metallic nanomaterials, carbon based nano-modifiers (reduced graphene oxide, multi-walled carbon nanotubes, ordered mesoporous carbon) and a large class of multifarious nano composites-based sensors and biosensors. The main drawbacks and superiorities associated with each array as well as the current trend in the areas is attempted to discuss. Summary of 79 employed electrochemical approaches for analysis of isoniazid and rifampicin has also been presented.

Rod-like Co based metal-organic framework embedded into mesoporous carbon composite modified glassy carbon electrode for effective detection of pyrazinamide and isonicotinyl hydrazide in biological samples

Herein, we report a novel composite fabricated via embedding rod-like Co based metal-organic framework (Co-MOF-74) crystals into MC matrix for the first time. The introduction of MC astricts the size of Co-MOF-74 crystals, enlarges the pore size and improves the electrical conductivity, which lead to the good electrochemical properties of the composite. The fabricated sensor based on Co-MOF-74@MC exhibits superior electrocatalytic activity toward the reduction of pyrazinamide (PZA) and the oxidation of isonicotinyl hydrazide (INZ). Under optimized conditions, the sensor shows two linear ranges from 0.3 to 46.5 μM and 46.5-166.5 μM with a high sensitivity of 7.2 μA μM^-1 cm^-2 and a detection limit of 0.21 μM for the determination of PZA. The electroanalytical sensing of INZ also gives two linear ranges of 0.15-1.55 μM and 1.55-592.55 μM with a detection limit of 0.094 μM. The mechanism involved was also discussed, briefly. The sensor is assessed toward the detection of PZA and INZ in human serum and urine samples. Recovery values varied from 97.08 to 103.20% for PZA sensing and 96.67-102.90% for INZ sensing, revealing the promising practicality of sensor for PZA and INZ detection.

Determination of norfloxacin in urine and pharmaceutical samples using terbium doped zinc sulphide nanomaterials-sensitized fluorescence method

Highly crystalline polyethylene glycol (PEG) coated Tb³⁺ doped ZnS nanoparticles have been synthesized and successfully used for norfloxacin sensing. The crystallographic and morphological analyses of PEG coated Tb³⁺ doped ZnS nanoparticles were performed by X-ray diffraction and Transmission electron microscopy, respectively. The confirmation of Tb³⁺ doping in ZnS host matrix was done by emission spectroscopy and energy dispersive X-ray spectroscopy. Further, the interaction of norfloxacin with PEG coated Tb³⁺ doped ZnS nanomaterials was confirmed by optical analysis: spectrophotometrically and spectrofluorimetrically. Norfloxacin sensing was measured by luminescence intensity which increased with increase in concentration of norfloxacin in range from 2.0 × 10^-9-8.0 × 10^-7 mol L^-1, with its correlation coefficient 0.9991. The detection limit of proposed method was 0.05 × 10^-9 mol L^-1. The developed luminescence method was successfully applied for the determination of norfloxacin using PEG coated Tb³⁺ doped ZnS nanoparticles in urine and pharmaceutical samples.

Graphene oxide-based electrochemical activation of ethionamide towards enhanced biological activity

The electrochemical behavior of ethionamide (ETO) was investigated on GO (∼500 nm) using the linear sweep voltammetric (LSV) technique at the sweep rate of 10 mV s⁻¹ in 1 M PBS buffer solution, and the characteristic anodic signal was examined at 0.240 V over the potential range of −0.4 to 1 V vs. SCE. However, linearity was observed with the increase in scan rate (2–300 mV s⁻¹) and concentration of ETO (1 μM to 100 mM), suggesting that the process involved diffusion-controlled electron transfer. The results also exhibited excellent current and potential stability, limit of detection (LOD 1.33) and limit of quantification (LOQ 4.4) at optimized experimental conditions. This electrochemical oxidation method was successfully applied in the complete oxidation of ETO to its oxidized form, which was further confirmed by high resolution mass spectroscopy (HRMS) and Fourier transform infrared (FTIR) spectroscopic measurements. Interestingly, the comparative biological evaluation of ETO and ETO-O (oxidised form) showed good enhancement in the activity of oxidised ETO against some Gram-negative pathogens, such as E. aerogenes, S. abony, S. boydii, and E. coli.

Electrochemical oxidative activation of ethionamide (ETO) on GO (∼500 nm) confirmed by HRMS and FTIR analysis. The ETO-O (oxidized form) showed enhancement in activity over ETO against Gram negative pathogens (E. aerogenes, S. abony, S. boydii, E. coli).

Synergistic design of a tin phosphate-entrapped graphene flake nanocomposite as an efficient catalyst for electrochemical determination of the antituberculosis drug isoniazid in biological samples

A SnP/GRF-modified electrode has potential application in the electrochemical detection of ISZ.

Detection of Antibiotics and Evaluation of Antibacterial Activity with Screen-Printed Electrodes

This review provides a brief overview of the fabrication and properties of screen-printed electrodes and details the different opportunities to apply them for the detection of antibiotics, detection of bacteria and antibiotic susceptibility. Among the alternative approaches to costly chromatographic or ELISA methods for antibiotics detection and to lengthy culture methods for bacteria detection, electrochemical biosensors based on screen-printed electrodes present some distinctive advantages. Chemical and (bio)sensors for the detection of antibiotics and assays coupling detection with screen-printed electrodes with immunomagnetic separation are described. With regards to detection of bacteria, the emphasis is placed on applications targeting viable bacterial cells. While the electrochemical sensors and biosensors face many challenges before replacing standard analysis methods, the potential of screen-printed electrodes is increasingly exploited and more applications are anticipated to advance towards commercial analytical tools.

Layered double hydroxide decorated with Ag nanodendrites as an enhanced sensing platform for voltammetric determination of pyrazinamide

A sensitive electrochemical sensor for pyrazinamide was constructed by electrodepositing Ag nanodendrites on the LDH-modified glassy carbon electrode.

Composite of Cu metal nanoparticles-multiwall carbon nanotubes-reduced graphene oxide as a novel and high performance platform of the electrochemical sensor for simultaneous determination of nitrite and nitrate

In the present research, we aimed to fabricate a novel electrochemical sensor based on Cu metal nanoparticles on the multiwall carbon nanotubes-reduced graphene oxide nanosheets (Cu/MWCNT/RGO) for individual and simultaneous determination of nitrite and nitrate ions. The morphology of the prepared nanocomposite on the surface of glassy carbon electrode (GCE) was characterized using various methods including scanning electron microscopy (SEM), atomic force microscopy (AFM), and electrochemical impedance spectroscopy. Under optimal experimental conditions, the modified GCE showed excellent catalytic activity toward the electro-reduction of nitrite and nitrate ions (pH=3.0) with a significant increase in cathodic peak currents in comparison with the unmodified GCE. By square wave voltammetry (SWV) the fabricated sensor demonstrated wide dynamic concentration ranges from 0.1 to 75μM with detection limits (3S_b/m) of 30nM and 20nM method for nitrite and nitrate ions, respectively. Furthermore, the applicability of the proposed modified electrode was demonstrated by measuring the concentration of nitrite and nitrate ions in the tap and mineral waters, sausages, salami, and cheese samples.

An electrochemical sensor for the simultaneous determination of rifampicin and isoniazid using a C-dots@CuFe2O4 nanocomposite modified carbon paste electrode

In this study, a sensitive carbon paste electrode based on a novel nanocomposite of carbon dots/CuFe₂O₄ (C-dots@CuFe₂O₄) was developed for the simultaneous determination of rifampicin (RIF) and isoniazid (INZ).

Development of a Nafion/MWCNT-SPCE-Based Portable Sensor for the Voltammetric Analysis of the Anti-Tuberculosis Drug Ethambutol

Herein we describe the development, characterization and application of an electrochemical sensor based on the use of Nafion/MWCNT-modified screen-printed carbon electrodes (SPCEs) for the voltammetric detection of the anti-tuberculosis (anti-TB) drug ethambutol (ETB). The electrochemical behaviour of the drug at the surface of the developed Nafion/MWCNT-SPCEs was studied through cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were employed to characterize the modified surface of the electrodes. Results showed that, compared to both unmodified and MWCNTs-modified SPCEs, negatively charged Nafion/MWCNT-SPCEs remarkably enhanced the electrochemical sensitivity and selectivity for ETB due to the synergistic effect of the electrostatic interaction between cationic ETB molecules and negatively charged Nafion polymer and the inherent electrocatalytic properties of both MWCNTs and Nafion. Nafion/MWCNT-SPCEs provided excellent biocompatibility, good electrical conductivity, low electrochemical interferences and a high signal-to-noise ratio, providing excellent performance towards ETB quantification in microvolumes of human urine and human blood serum samples. The outcomes of this paper confirm that the Nafion/MWCNT-SPCE-based device could be a potential candidate for the development of a low-cost, yet reliable and efficient electrochemical portable sensor for the low-level detection of this antimycobacterial drug in biological samples.

Research progress in electroanalytical techniques for determination of antimalarial drugs in pharmaceutical and biological samples

The review focusses on the role of electroanalytical methods for determination of antimalarial drugs in biological matrices and pharmaceutical formulations with a critical analysis of published voltammetric and potentiometric methods.