Fabrication of reusable electrochemical biosensor and its application for the assay of α-glucosidase activity

A dual-signal triple-readout optical sensing platform for α-glucosidase and β-glucosidase activity monitoring and inhibitor screening based on luminescent covalent organic framework

BACKGROUND

As promising biomarkers of diabetes, α-glucosidase (α-Glu) and β-glucosidase (β-Glu) play a crucial role in the diagnosis and management of diseases. However, there is a scarcity of techniques available for simultaneously and sensitively detecting both enzymes. What's more, most of the approaches for detecting α-Glu and β-Glu rely on a single-mode readout, which can be affected by multiple factors leading to inaccurate results. Hence, the simultaneous detection of the activity levels of both enzymes in a single sample utilizing multiple-readout sensing approaches is highly attractive.

RESULTS

In this work, we constructed a facile sensing platform for the simultaneous determination of α-Glu and β-Glu by utilizing a luminescent covalent organic framework (COF) as a fluorescent indicator. The enzymatic hydrolysis product common to both enzymes, p-nitrophenol (PNP), was found to affect the fluorometric signal through an inner filter effect on COF, enhance the colorimetric response by intensifying the absorption peak at 400 nm, and induce changes in RGB values when analyzed using a smartphone-based color recognition application. By combining fluorometric/colorimetric measurements with smartphone-assisted RGB mode, we achieved sensitive and accurate quantification of α-Glu and β-Glu. The limits of detection for α-Glu were determined to be 0.8, 1.22, and 1.85 U/L, respectively. Similarly, the limits of detection for β-Glu were 0.16, 0.42, and 0.53 U/L, respectively.

SIGNIFICANCE

Application of the proposed sensing platform to clinical serum samples revealed significant differences in the two enzymes between healthy people and diabetic patients. Additionally, the proposed sensing method was successfully applied for the screening of α-Glu inhibitors and β-Glu inhibitors, demonstrating its viability and prospective applications in the clinical management of diabetes as well as the discovery of antidiabetic medications.

Boron-doped g-C3N4 supporting Cu nanozyme for colorimetric-fluorescent-smartphone detection of α-glucosidase

BACKGROUND

Due to that the higher activity of nanozymes would bring outstanding performance for the nanozyme-based biosensing strategies, great efforts have been made by researchers to improve the catalytic activity of nanozymes, and novel nanozymes with high catalytic activity are desired. Considering the crucial role in controlling blood glucose level, strategies like colorimetric and chemiluminescence to monitor α-glucosidase are developed. However, multi-mode detection with higher sensitivity was insufficient. Therefore, developing triple-mode detection method for α-glucosidase based on great performance nanozyme is of great importance.

RESULTS

In this work, a novel nanozyme Cu-BCN was synthesized by loading Cu on boron doped carbon substrate g-C3N4 and applied to the colorimetric-fluorescent-smartphone triple-mode detection of α-glucosidase. In the presence of H2O2, Cu-BCN catalyzed the generation of 1O2 from H2O2, 1O2 subsequently oxidized TMB to blue colored oxTMB. In the presence of hydroquinone (HQ), the ROS produced from H2O2 was consumed, inhibiting the oxidation of TMB, which endows the possibility of colorimetric and visual on-site detection of HQ. Further, due to that the fluorescence of Mg-CQDs at 444 nm could be quenched by oxTMB, HQ could also be quantified through fluorescent mode. Since α-glucosidase could efficiently hydrolyze α-arbutin into HQ, the sensitive detection of α-glucosidase was realized. Further, colorimetric paper-based device (c-PAD) was fabricated for on-site α-glucosidase detection. The LODs for α-glucosidase via three modes were 2.20, 1.62 and 2.83 U/L respectively, high sensitivities were realized.

SIGNIFICANCE

The nanozyme Cu-BCN possesses higher peroxidase-like activity by doping boron to the substrate than non-doped Cu-CN. The proposed triple-mode detection of α-glucosidase is more sensitive than most previous reports, and is reliable when applied to practical sample. Further, the smartphone-based colorimetric paper-based analytical device (c-PAD) made of simple materials could also detect α-glucosidase sensitively. The smartphone-based on-site detection provided a convenient, instrument-free and sensitive sensing method for α-glucosidase.

Fluorescent metal nanoclusters: From luminescence mechanism to applications in enzyme activity assays

Metal nanoclusters (MNCs) have outstanding fluorescence property and biocompatibility, which show widespread applications in biological analysis. Particularly, evaluation of enzyme activity with the fluorescent MNCs has been developed rapidly within the past several years. In this review, we first introduced the fluorescent mechanism of mono- and bi-metallic nanoclusters, respectively, whose interesting luminescence properties are mainly resulted from electron transfer between the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels. Meanwhile, the charge migration within the structure occurs through ligand-metal charge transfer (LMCT) or ligand-metal-metal charge transfer (LMMCT). On such foundation, diverse enzyme activities were rigorously evaluated, including three transferases and nine hydrolases, in turn harvesting rapid research progresses within past 5 years. Finally, we summarized the design strategies for evaluating enzyme activity with the MNCs, presented the major issues and challenges remained in the relevant research, coupled by showing some improvement measures. This review will attract researchers dedicated to the studies of the MNCs and provide some constructive insights for their further applications in enzyme analysis.

GAA/(Au-Au/IrO2)@Cu(PABA) reactor with cascade catalytic activity for α-glucosidase inhibitor screening

BACKGROUND

In vitro screening strategies based on the inhibition of α-glucosidase (GAA) activity have been widely used for the discovery of potential antidiabetic drugs, but they still face some challenges, such as poor enzyme stability, non-reusability and narrow range of applicability. To overcome these limitations, an in vitro screening method based on GAA@GOx@Cu-MOF reactor was developed in our previous study. However, the method was still not satisfactory enough in terms of construction cost, pH stability, organic solvent resistance and reusability. Thence, there is still a great need for the development of in vitro screening methods with lower cost and wider applicability.

RESULTS

A colorimetric sensing strategy based on GAA/(Au-Au/IrO2)@Cu(PABA) cascade catalytic reactor, which constructed through simultaneous encapsulating Au-Au/IrO2 nanozyme with glucose oxidase-mimicking and peroxidase-mimicking activities and GAA in Cu(PABA) carrier with peroxidase-mimicking activity, was innovatively developed for in vitro screening of GAA inhibitors in this work. It was found that the reactor not only exhibited excellent thermal stability, pH stability, organic solvent resistance, room temperature storage stability, and reusability, but also possessed cascade catalytic performance, with approximately 12.36-fold increased catalytic activity compared to the free system (GAA + Au-Au/IrO2). Moreover, the in vitro GAA inhibitors screening method based on this reactor demonstrated considerable anti-interference performance and detection sensitivity, with a detection limit of 4.79 nM for acarbose. Meanwhile, the method owned good reliability and accuracy, and has been successfully applied to the in vitro screening of oleanolic acid derivatives as potential GAA inhibitors.

SIGNIFICANCE

This method not only more effectively solved the shortcomings of poor stability, narrow scope of application, and non-reusability of natural enzymes in the classical method compared with our previous work, but also broaden the application scope of Au-Au/IrO2 nanozyme with glucose oxidase and peroxidase mimicking activities, and Cu(PABA) carrier with peroxidase mimicking activity, which was expected to be a new generation candidate method for GAA inhibitor screening.

Exogenous Co-Reactant-Free Electrochemiluminescent Biosensor for Ratiometric Measurement of α-Glucosidase Based on a ZIF-67-Regulated Hydrogen-Bonded Organic Framework

The development of highly sensitive and selective analytical approaches for monitoring enzymatic activity is critical for disease diagnosis and biomedical research. Herein, we develop an exogenous co-reactant-free electrochemiluminescence (ECL) biosensor for the ratiometric measurement of α-glucosidase (α-Glu) based on a zeolitic imidazolate framework (ZIF-67)-regulated pyrene-based hydrogen-bonded organic framework (HOF-101). Target α-Glu can hydrolyze maltose to α-d-glucose, which can subsequently react with GOx to produce gluconic acid. The resultant gluconic acid can dissolve ZIF-67, leading to the recovery of the HOF-101 cathodic ECL signal and the decrease of the luminol anodic ECL signal. The long-range ordered structure of HOF-101 can speed up charge transfer, resulting in a stable and strong cathodic ECL signal. Moreover, ZIF-67 can not only efficiently quench the ECL signal of HOF-101 due to ECL resonance energy transfer between HOF-101 and ZIF-67 as well as the steric hindrance effect of ZIF-67 but also enhance the anodic ECL emission of luminol in dissolved O2 system because of its ordered and porous crystalline structure and the atomically dispersed Co2+. Notably, HOF-101 possesses a higher ECL efficiency (32.22%) compared with the Ru(bpy)32+ standard. Importantly, this ratiometric ECL biosensor shows high sensitivity (a detection limit of 0.19 U L-1) and a broad linear range (0.2-50 U L-1). This biosensor can efficiently eliminate systematic errors and enhance detection reliability without the involvement of exogenous co-reactants, and it displays good assay performance in human serum samples, holding great promise in biomedical research studies.

A colorimetric sensing strategy based on chitosan-stabilized platinum nanoparticles for quick detection of α-glucosidase activity and inhibitor screening

α-Glucosidase (α-Glu) is implicated in the progression and pathogenesis of type II diabetes (T2D). In this study, we developed a rapid colorimetric technique using platinum nanoparticles stabilized by chitosan (Ch-PtNPs) to detect α-Glu activity and its inhibitor. The Ch-PtNPs facilitate the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) into oxidized TMB (oxTMB) in the presence of dissolved O2. The catalytic hydrolysis of 2-O-α-D-glucopyranosyl-L-ascorbic acid (AA-2G) by α-Glu produces ascorbic acid (AA), which reduces oxTMB to TMB, leading to the fading of the blue color. However, the presence of α-Glu inhibitors (AGIs) hinders the generation of AA, allowing Ch-PtNPs to re-oxidize colorless TMB back to blue oxTMB. This unique phenomenon enables the colorimetric detection of α-Glu activity and AGIs. The linear range for α-Glu was found to be 0.1-1.0 U mL-1 and the detection limit was 0.026 U mL-1. Additionally, the half-maximal inhibition value (IC50) for acarbose, an α-Glu inhibitor, was calculated to be 0.4769 mM. Excitingly, this sensing platform successfully detected α-Glu activity in human serum samples and effectively screened AGIs. These promising findings highlight the potential application of the proposed strategy in clinical diabetes diagnosis and drug discovery.

Fluorometric and colorimetric dual-mode sensing of α-glucosidase based on aggregation-induced emission enhancement of AuNCs

Herein, a fluorometric and colorimetric dual-mode assay platform used for α-glucosidase (α-Glu) activity sensing based on aggregation-induced emission enhancement (AIEE) of AuNCs was developed for the first time. The quantum yield (QY) and fluorescence lifetime of AuNCs were successfully ameliorated by Ce3+-triggered AIEE (Ce@AuNCs). Subsequently, on the basis of the inner filter effect (IFE) and dynamic quenching effect (DQE) between 2,6-dichlorophenolindophenol (DCIP) and Ce@AuNCs as well as the reduction of DCIP by ascorbic acid (AA) generated from α-Glu-catalyzed hydrolysis of L-ascorbic acid-2-O-α-D-glucopyranosyl (AA2G), the marriage of fluorometric and colorimetric modes applied for α-Glu activity monitoring was achieved. Besides, the feasibility of this dual-mode sensing system was confirmed by the assays versus potential interfering substances and in real samples. In particular, this system was further applied to evaluate natural α-Glu inhibitors (AGIs) including luteolin, apigenin, and hesperidin. Overall, the multi-mode optical sensor newly designed here has the potential for the accurate discovery of natural anti-diabetes drugs and the therapy of diabetes.

Development of an electrochemical sensor using carbon nanotubes and hydrophobic natural deep eutectic solvents for the detection of α-glucosidase activity in extracts of autochthonous medicinal plants

The present work describes for the first time the use of a hydrophobic natural deep eutectic solvent (H-NADES) as a dispersant for carboxylated nanotubes for the design and construction of an electrochemical sensor for the assay of α-glucosidase and its inhibitors. In this work, we used as the electrochemical probe the product of the enzymatic reaction, which consists of two redox groups and generates the analytical signal. The combination of de carboxylic multi-walled carbon nanotubes (MWCNTc) and the H-NADES of thymol and lactic acid (TLa) increases the electroactive surface area and promotes electron transfer of the electrode modified with carbon nanotubes. The electrochemical sensor enabled the detection of α-glucosidase in a range of 0.004-0.1 U mL-1 with a detection limit of 0.0013 U mL-1, which is lower than most existing methods. In addition, two α-glucosidase inhibitors, acarbose and quercetin, and two plant extracts, Schinus molle and Eugenia uniflora, were evaluated to assess the feasibility of screening potential antidiabetic drugs, and the IC50 values were 5.37 μg mL-1 and 5.28 μg mL-1. Thus, this sensing strategy represents the beginning of the incorporation of NADES in the development and design of novel sensors and their application in electrochemistry and medical analysis.

Sulfur dots and iron co-doped nickel-based metal-organic frameworks with high nanozyme activity for the colorimetric determination of α-glucosidase activity

Alpha-glucosidase (α-Glu) plays a crucial role in regulating the normal physiological function of the body; therefore, α-Glu activity detection is crucial in clinical studies. In this study, a nickel-based metal-organic framework (Ni-MOF) co-doped with sulfur dots (SDs) and iron (Fe) was designed and constructed for the colorimetric detection of α-Glu. The SDs/Fe/Ni-MOF shows a very low Michaelis-Menten constant (0.0466 mM) for H2O2, suggesting a very high affinity for H2O2. Additionally, the free radicals generated by the nanozyme-catalyzed reaction were analyzed, and the feasibility of the nanozyme-catalyzed process was further verified using density functional theory. The bimetallic (Fe and Ni) can improve the catalytic activity of the material, and sulfur can improve the affinity with the substrate to further enhance the catalytic performance. Notably, hydroquinone (HQ) inhibits nanozyme activity, whereas α-Glu hydrolyzes alpha-arbutin (α-Arb) and subsequently produces HQ. Therefore, this study developed a method for detecting α-Glu activity using α-Arb as a substrate. This method has high selectivity, a wide detection range (1.00-100 U L-1), and a low detection limit (0.525 U L-1). Finally, the method was used to α-Glu activity detected in serum samples with good accuracy. This study provides a new method for the detection of α-Glu.

Signal-off electrochemical sensor for matrix metalloproteinase 9 detection based on sacrificial FeMOF and host-guest strategy

Matrix metalloproteinase-9 (MMP-9) has been implicated in various tumor cell invasions and metastases. In light of the limitations of traditional methods for MMP-9 detection, we have constructed a novel biosensor depending on cucurbit[8]uril (CB[8]) -mediated host-guest interactions and a sacrificial iron metal-organic framework (FeMOF). Herein, MMP9-specific peptides modified on the gold bare electrode are bonded to the FeMOF@AuNPs@peptide complex through CB[8] addition. The connection between MMP9-specific peptides and signal peptides via CB[8] provides stability as well as enables the immobilization of FeMOF on the electrode surface. When Fe3+ from the FeMOF interacts with electrochemical buffer K4Fe(CN)6, Prussian blue will be generated on the gold electrode surface, and a significantly enlarged current response can be detected. However, in the presence of MMP-9, their peptide substrates are specifically cleaved at the site between serine (S) and Leucine (L), which causes an abrupt decrease in the electrochemical signal. The change of signal can reflect MMP-9 concentration. This sensor can reach an ultrahigh sensitivity with a wide detection range of 0.5 pg⋅mL-1 to 500 ng⋅mL-1 and a low detection limit of 1.30 pg⋅mL-1. Importantly, this sensor is very simple, relying solely on self-sacrificial label of FeMOF, rather than complex functional materials. Additionally, it has been well used in serum samples, showing attractive potential for practical applications.

Fluorescence detection of 4-nitrophenol and α-glucosidase activity based on 4-nitrophenol-regulated fluorescence of silicon nanoparticles

A fluorescence assay for the detection of 4-nitrophenol (4-NP), α-glucosidase (α-Glu) activity and α-Glu inhibitors (AGIs) is developed based on the inner filter effect (IFE), a flexible and simple signal transfer strategy. In this assay, silicon nanoparticles (Si NPs) synthesized under mild and easily accessible conditions are employed as fluorescent indicators. 4-NP efficaciously quenches the fluorescence of Si NPs through the IFE at a very rapid rate, thus achieving 4-NP detection in a mix-to-read manner, which is suitable for on-site detection. The quenching mechanism has been comprehensively studied and confirmed. More significantly, based on the fact that 4-NP can be generated through α-Glu-catalyzed hydrolysis of 4-nitrophenyl-α-D-glucopyranoside (NPG), the fluorescence detection of α-Glu activity is legitimately achieved by employing NPG as the substrate. The linear ranges for 4-NP and α-Glu activity detection are 0.5-60 μM and 0.5-60 mU mL-1 with low detection limits of 0.074 μM and 0.094 mU mL-1, respectively. This method not only can preciously assay targets in real samples, but is also capable of screening AGIs as drugs as well as assessing their inhibition efficiency.

Guar gum-enhanced emission of gold nanoclusters for α-glucosidase activity detection and anti-diabetic agents screening in plant extracts

The development of efficient fluorescent methods for α-glucosidase (α-Glu) detection and α-Glu inhibitor screening plays a critical role in the therapy of type 2 diabetes (T2D). Herein, guar gum (GG), a high-abundant and non-toxic natural polymer originated from the seeds of a drought-tolerant plant, Cyamposis tetragonolobus, was found to be able to enhance the fluorescence emission of gold nanoclusters (AuNCs) probe. The emission enhancement effect was achieved by using GG at very low concentrations (<1.0 wt%) and presented in a viscosity-dependent manner through increasing solvent reorientation time and inhibiting intramolecular motions of AuNCs. Furthermore, the enhanced emission of the AuNCs was quenched by Fe³⁺via dynamic quenching and then restored by α-Glu. Accordingly, a fluorimetric method was proposed for the determination of α-Glu. Owing to the fluorescence enhancement effect of GG on the AuNCs probe, the detection limit of the approach was 0.13 U L^-1 and the detection range was up to 5 orders of magnitude from 0.2 to 4000 U L^-1, which was much better than most current α-Glu detection methods. The approach was further applied to α-Glu inhibitors screening from natural plant extracts, providing great prospects for the prevention and treatment of T2D.

A Novel Activated Biochar-Based Immunosensor for Rapid Detection of E. coli O157:H7

E. coli O157:H7, one of the major foodborne pathogens, can cause a significant threat to the safety of foods. The aim of this research is to develop an activated biochar-based immunosensor that can rapidly detect E. coli O157:H7 cells without incubation in pure culture. Biochar was developed from corn stalks using proprietary reactors and then activated using steam-activation treatment. The developed activated biochar presented an enhanced surface area of 830.78 m²/g. To develop the biosensor, the gold electrode of the sensor was first coated with activated biochar and then functionalized with streptavidin as a linker and further immobilized with biotin-labeled anti-E. coli polyclonal antibodies (pAbs). The optimum concentration of activated biochar for sensor development was determined to be 20 mg/mL. Binding of anti-E. coli pAbs with E. coli O157:H7 resulted in a significant increase in impedance amplitude from 3.5 to 8.5 kΩ when compared to an only activated biochar-coated electrode. The developed immunosensor was able to detect E. coli O157:H7 cells with a limit of detection of 4 log CFU/mL without incubation. Successful binding of E. coli O157:H7 onto an activated biochar-based immunosensor was observed on the microelectrode surface in scanning electron microscopy (SEM) images.

Responsive Fluorescent Coumarin–Cinnamic Acid Conjugates for α-Glucosidase Detection

α-Glucosidase is a potent drug target for treating type II diabetes mellitus. A great number of α-glucosidase inhibitors have been developed based on the molecular skeletons of bioactive natural products. However, efficient fluorescent probes for α-glucosidase detection are still limited, not to mention the probes with additional inhibitory functions. In this work, aiming for the enzyme’s highly specific detection, we designed and synthesized two environmentally sensitive fluorescent probes, namely, LD01 and LD02, respectively, based on conjugates of coumarin and cinnamic acid derivatives. We found a significant responsive emission enhancement upon LD02’s binding to α-glucosidase. These newly designed probes can act as a simple but efficient tool to evaluate the binding affinity of α-glucosidase to their inhibitors.

Demethylation of m1A assisted degradation of the signal probe for rapid electrochemical detection of ALKBH3 activity with practical applications

ALKBH3 is an important marker for early diagnosis and histopathological grading of prostate cancer. However, the lack of a rapid and sensitive method to quantify the enzyme's activity in the current time necessitates the development of a new quantitative assay. Herein, we first tried to quantitative assay for ALKBH3 activity using an electrochemical method based on the degradation of the signal probe due to alkyl group of the m1A removal by ALKBH3. A strong electrochemical signal can be obtained when the ferrocene (Fc) labeled dsDNAs with 1-methyladenine are immobilized on the electrode. In the presence of ALKBH3, the 3' blunt of DNA can be formed because of the removal of alkyl group of the Fc-DNA probe, which can be recognized and degraded by Exonuclease III (Exo III). As a result, the electrochemical signal produced by Fc greatly decreases, and the activity of ALKBH3 can be easily detected via changes in electrochemical signal. Quantitative analysis of ALKBH3 activity showed a wide detection range (0.1 and 20 ng/mL) and low detection limit (0.04 ng/mL). Furthermore, the method can be applied to detect 1-methyladenine through ALKBH3 in cell lysates and tissue samples, providing a new method for clinical detection of prostate cancer.

α-Glucosidase-Triggered Reaction for Fluorometric and Colorimetric Assays Based on the Formation of Silicon-Containing Nanoparticles

Designing analytical approaches for enzymatic activity monitoring with high sensitivity and selectivity is of critical value for the diagnosis of diseases and biomedical studies. In this study, we have created a facile one-step synthetic route to prepare orange-red color and yellow fluorescent silicon-containing nanoparticles (Si CNPs) by mixing 3(2-aminoethylamino) propyl (dimethoxymethylsilane) and hydroquinone (HQ) in an aqueous solution. Inspired by the HQ-regulated facile synthetic step and the generation of HQ from α-glucosidase (α-Glu)-catalyzed hydrolysis of 4-hydroxyphenyl-α-d-glucopyranosyl (4-HPαDG), we have designed a straightforward colorimetric and fluorometric α-Glu activity assay using a commercially available 4-HPαDG as the α-Glu substrate. Fluorescent and colorimetric assays for α-Glu activity measurement have been thereby established and exhibited detection limits as low as 0.0032 and 0.0046 U/mL, respectively. Under single excitation at 370 nm, the prepared Si CNPs emitted yellow fluorescence at 520 nm and exhibited an absorbance peak at 390 nm. In addition, the proposed approach reveals various advantages including easy operation, time-saving, and good anti-interference ability. Hence, it could improve the progress of fluorometric and colorimetric enzymatic activity assays with high sensitivity and simplicity. Moreover, the proposed approach was applied for α-Glu inhibitor screening, and its feasibility in real samples was measured by detecting the α-Glu activity in human serum samples.

Confining copper nanoclusters on exfoliation-free 2D boehmite nanosheets: Fabrication of ultra-sensitive sensing platform for α-glucosidase activity monitoring and natural anti-diabetes drug screening

α-Glucosidase (α-Glu) and its inhibitors play critical roles in diabetes therapy. Herein, a simple and ultra-sensitive fluorescence sensing approach was fabricated for α-Glu activity monitoring and natural inhibitor screening by electrostatically confining negatively charged glutathione-capped copper nanoclusters (GSH-CuNCs) on exfoliation-free and positively charged 2D boehmite (Boe) nanosheets. Boe significantly improved the fluorescence emission/stability of GSH-CuNCs and simultaneously led to an obvious blue-shift of the excitation peak of CuNCs from 365 nm to 330 nm. As a result, the fluorescence emission of Boe@GSH-CuNCs was efficiently quenched by 4-nitrophenyl-α-D-glucopyranoside (PNPG) with a maximum absorbance peak (λ_max) at 310 nm via inner filter effect, and sequentially recovered by α-Glu through the hydrolysis of PNPG to p-nitrophenol (λ_max = 410 nm). Accordingly, an ultra-sensitive fluorescence assay for the determination of α-Glu activity was proposed by using Boe@GSH-CuNCs as fluorescence probes. The detection limit of 0.43 U/L was achieved, which was lower than most of other α-Glu activity assays. Furthermore, this method was capable of screening α-Glu inhibitors originated from actinomycetes, peanut, sophora flower, celery, and orange as potential anti-diabetes drugs. Taken together, this work provided a promising strategy for clinical treatment of diabetes and discovery of anti-diabetes drugs.

Reusable Fluorescent Nanobiosensor Integrated in a Multiwell Plate for Screening and Quantification of Antidiabetic Drugs

A highly stable and reusable fluorescent multisample nanobiosensor for the detection of α-glucosidase inhibitors has been developed by coupling fluorescent liposomal nanoparticles based on conjugated polymers (L-CPNs) to the enzyme α-glucosidase, one of the main target enzymes in the treatment of type 2 diabetes. The mechanism of sensing is based on the fluorescence "turn-on" of L-CPNs by p-nitrophenol (PNP), the end product of the enzymatic hydrolysis of p-nitrophenyl-α-d-glucopyranoside. L-CPNs, composed of lipid vesicles coated with a blue-emitting cationic polyfluorene, were designed and characterized to obtain a good response to PNP. Two nanobiosensor configurations were developed in this study. In the first step, a single-sample nanobiosensor composed of L-CPNs and α-glucosidase entrapped in a sol-gel glass was developed in order to characterize and optimize the device. In the second part, the nanobiosensor was integrated and adapted to a multiwell microplate and the possibility of reusing it and performing multiple measurements simultaneously with samples containing different α-glucosidase inhibitors was investigated. Using super-resolution confocal microscopy, L-CPNs could be visualized within the sol-gel matrix, and the quenching of their fluorescence, induced by the substrate, was directly observed in situ. The device was also shown to be useful not only as a platform for screening of antidiabetic drugs but also for quantifying their presence. The latter application was successfully tested with the currently available drug, acarbose.

A fluorescence strategy for monitoring α-glucosidase activity and screening its inhibitors from Chinese herbal medicines based on Cu nanoclusters with aggregation-induced emission

Herein, the self-assembly of 1-dodecanethiol-capped Cu nanoclusters (DT-Cu NCs) is obtained by annealing of dibenzyl ether solution of nanoclusters. These aggregates are composed of small clusters and emit a high level of aggregation-induced emission (AIE) in water. Based on the quenching effect of 4-nitrophenol (4-NP) on DT-Cu NCs, a fluorescence strategy is developed to monitor α-glucosidase (α-Glu) activity and screen its inhibitors from Chinese herbal medicines. 4-Nitrophenyl-α-D-glucopyranoside (NGP) is selected as the substrate, which is further hydrolyzed to yield 4-NP through the catalysis of α-Glu. The quenching efficiency is positively correlated to the concentration of α-Glu. Furthermore, the inhibitory effects of the extracts from four Chinese herbal medicines (i.e., the rind of Punica granatum L., Momordica grosvenorii Swingle., Crataegus pinnatifida Bge., and Lycium barbarum L.) on the α-Glu activity have been studied. The IC₅₀ values of extracts from the rind of Punica granatum L. and Momordica grosvenorii Swingle are 0.23 and 0.37 g/L, respectively, so they show obvious inhibitory effects on α-Glu. The extracts of Crataegus pinnatifida Bge. and Lycium barbarum L. exhibit relatively weak inhibitory effects. Hence, the proposed strategy can be applicable for screening α-Glu inhibitors from Chinese herbal medicines. Last but not the least, by immobilizing DT-Cu NCs into agarose hydrogels in polyethylene tubes, a visual device is fabricated to screen α-Glu inhibitors with high throughput and sensitivity.

Carbon nitride nanoparticles as ultrasensitive fluorescent probes for the detection of α-glucosidase activity and inhibitor screening

In recent years, α-glucosidase inhibitors (AGIs) have played a significant role in the treatment of type II diabetes (T2D), so it is necessary to develop a reliable and sensitive method to find new AGIs. Herein, we establish a novel method based on fluorescent carbon nitride nanoparticles (CNNPs) for the sensitive detection of the activity of α-glucosidase (α-glu) and the screening of its inhibitors. A CNNP-based fluorescent probe is synthesized from green raw materials, urea and lysine, by a one-pot method. In the presence of α-glu, the substrate 4-nitrophenyl-α-d-glucopyranoside (pNPG) is hydrolyzed to generate 4-nitrophenol (pNP), leading to the fluorescence (FL) quenching of CNNPs due to the inner filter effect (IFE). On the other hand, the activity of α-glu is inhibited after the addition of AGIs, which turns on the FL of CNNPs. In this way, the detection of α-glu activity and the screening of AGIs are achieved. The linear range is 1.25-10.00 U L^-1 with a limit of detection as low as 0.17 U L^-1 and the IC₅₀ values of two typical inhibitors (gallic acid and acarbose) are 813 μM and 465 μM, respectively. The CNNP probe is further applied for the determination of α-glu activity in human serum samples with satisfactory results.

Redox-induced target-dependent ratiometric fluorescence sensing strategy and logic gate operation for detection of α-glucosidase activity and its inhibitor

A target-dependent ratiometric fluorescence sensing strategy was designed and fabricated based on a redox reaction for highly sensitive detection of α-glucosidase (α-Glu) activity and its inhibitor. In this study, silicon quantum dots (SiQDs) with excellent optical properties and two-dimensional (2D) cobalt oxyhydroxide (CoOOH) nanosheets were successfully prepared and exploited for the detection of analytes. The CoOOH nanosheets are able to oxidize o-phenylenediamine (OPD), and the product 2,3-diaminophenazine (oxOPD) not only quenches the blue fluorescence of SiQDs (440 nm) by the inner filter effect (IFE) but also emits orange fluorescence (565 nm). α-Glu can catalytically hydrolyze l-ascorbic acid-2-O-α-d-glucopyranosyl (AA2G) to produce ascorbic acid (AA). The redox between AA and CoOOH could lead to the damage of CoOOH nanosheets, thereby inhibiting the oxidization of OPD and effectively preserving the fluorescence of SiQDs. Thus, ratiometric detection of α-Glu activity was achieved according to the AA-dependent dual-fluorescence signal responses. Under the optimal conditions, good linearity was obtained in the range of 0.01-6 U mL-1 with a detection limit of 0.004 U mL-1. The IC50 of α-Glu inhibitor acarbose was estimated to be 0.216 μM. The method provides high sensitivity and selectivity for the determination of α-Glu activity and its inhibitor, which has great application potential in clinical diagnosis and anti-diabetic drug screening. Furthermore, a logic gate analytical device was successfully established based on double fluorescence signals, which makes it possible to monitor α-Glu activity by intelligence equipment.

Recent Advances in Electrochemical Sensors for the Detection of Biomolecules and Whole Cells

Electrochemical sensors are considered an auspicious tool to detect biomolecules (e.g., DNA, proteins, and lipids), which are valuable sources for the early diagnosis of diseases and disorders. Advances in electrochemical sensing platforms have enabled the development of a new type of biosensor, enabling label-free, non-destructive detection of viability, function, and the genetic signature of whole cells. Numerous studies have attempted to enhance both the sensitivity and selectivity of electrochemical sensors, which are the most critical parameters for assessing sensor performance. Various nanomaterials, including metal nanoparticles, carbon nanotubes, graphene and its derivatives, and metal oxide nanoparticles, have been used to improve the electrical conductivity and electrocatalytic properties of working electrodes, increasing sensor sensitivity. Further modifications have been implemented to advance sensor platform selectivity and biocompatibility using biomaterials such as antibodies, aptamers, extracellular matrix (ECM) proteins, and peptide composites. This paper summarizes recent electrochemical sensors designed to detect target biomolecules and animal cells (cancer cells and stem cells). We hope that this review will inspire researchers to increase their efforts to accelerate biosensor progress-enabling a prosperous future in regenerative medicine and the biomedical industry.

A colorimetric sensing strategy based on enzyme@metal-organic framework and oxidase-like IrO2/MnO2 nanocomposite for α-glucosidase inhibitor screening

A highly sensitive colorimetric sensing strategy based on enzyme@metal-organic framework (GAA@Cu-MOF) and IrO₂/MnO₂ nanocomposite was exploited innovatively for screening of α-glucosidase (GAA) inhibitors. IrO₂/MnO₂ nanocomposite exhibits excellent oxidase-mimicking activity which can directly catalyze the oxidation of 3,3^,5,5^,-tetramethylbenzidine (TMB) into a blue product with an absorption maximum at 652 nm. And GAA@Cu-MOF can decompose L-ascorbic acid-2-O-α-D-glucopyranosyl (AAG) to ascorbic acid (AA). The produced AA can destroy the IrO₂/MnO₂ nanocomposite and reduce its oxidase-like activity. However, the generation of AA is restricted when GAA inhibitors are added to the system, which allows the oxidase-like activity of the IrO₂/MnO₂ nanocomposite to be maintained. In view of this, a method for screening of GAA inhibitors was developed. In addition to enhancing the stability of GAA, the method can also effectively avoid the potential interference of H₂O₂ in the screening process of GAA inhibitors, which helps to improve the sensitivity of the method. Therefore, highly sensitive determination for acarbose and ascorbic acid are achieved with detection limits of 6.27 nM and 1.23 μM, respectively. The proposed method was successfully applied to screen potential GAA inhibitors from oleanolic acid derivatives. Graphical abstract.

Cellulose-based Biosensor for Bio-molecules Detection in Medical Diagnosis: A Mini-Review

Background::

Biosensors are widely applied for the detection of bio-molecules in blood glucose , cholesterol, and gene. Cellulose as the most dominating natural polymer has attracted more and more interest, especially in the field of medicine such as advanced medical diagnosis. Cellulose could endow biosensors with improved biocompatibility, biodegradability and nontoxicity, which could help in medical diagnosis. This mini-review summarizes the current development of cellulose-based biosensors as well as their applications in medical diagnosis in recent years.

Methods:

After reviewing recent years’ publications we can say that, there are several kinds of cellulose used in biosensors including different cellulose derivatives, bacterial cellulose and nanocellulose. Different types of cellulose-based biosensors, such as membrane, nano-cellulose and others were briefly described in addition to the detection principle. Cellulose-based biosensors were summarized as in the previous papers. The description of various methods used for preparing cellulose-based biosensors was also provided.

Results:

Cellulose and its derivatives with their unique chemical structure proved to be versatile materials providing a good platform for achieving immobilizing bioactive molecules in biosensors. These cellulose-based biosensors possess various desirable properties such as accuracy, sensitivity, convenience, low cost and fast response. Among them, cellulose paper-based biosensors have the advantages of low cost and easy operation. Nano-cellulose has unique properties such as a large aspect ratio, good dispersing ability and high absorption capacity.

Conclusion:

Cellulose displays a promising application in biosensors which could be used to detect different bio-molecules such as glucose, lactate, urea, gene, cell, amino acid, cholesterol, protein and hydroquinone. In future, the attention will be focused on designing miniaturized, multifunctional, intelligent and integrated biosensors. Creation of low cost and environmentally friendly biosensors is also very important.

Splitting aptamers and nucleic acid enzymes for the development of advanced biosensors

In analogy to split-protein systems, which rely on the appropriate fragmentation of protein domains, split aptamers made of two or more short nucleic acid strands have emerged as novel tools in biosensor set-ups. The concept relies on dissecting an aptamer into a series of two or more independent fragments, able to assemble in the presence of a specific target. The stability of the assembled structure can further be enhanced by functionalities that upon folding would lead to covalent end-joining of the fragments. To date, only a few aptamers have been split successfully, and application of split aptamers in biosensing approaches remains as promising as it is challenging. Further improving the stability of split aptamer target complexes and with that the sensitivity as well as efficient working modes are important tasks. Here we review functional nucleic acid assemblies that are derived from aptamers and ribozymes/DNAzymes. We focus on the thrombin, the adenosine/ATP and the cocaine split aptamers as the three most studied DNA split systems and on split DNAzyme assemblies. Furthermore, we extend the subject into split light up RNA aptamers used as mimics of the green fluorescent protein (GFP), and split ribozymes.

Emerging strategies for the activity assay and inhibitor screening of alpha-glucosidase

The high incidence of diabetes mellitus has caused widespread concern around the world, and has quickly become one of the most prevalent and costly chronic diseases.

Bifunctional Hybrid Enzyme-Catalytic Metal Organic Framework Reactors for α-Glucosidase Inhibitor Screening

The screening strategy based on α-glucosidase inhibition has been widely employed for the discovery of antidiabetic drugs, but it still faces some challenges in practical applications, such as poor stability of enzyme, high consumption of test compounds, low sensitivity of screening methods and so on. In this work, a bifunctional hybrid enzyme-catalytic metal organic framework reactor (GAA@GOx@Cu-MOF) with a flower-shaped globular structure was innovatively prepared via self-assembling of α-glucosidase (GAA), glucose oxidase (GOx), Cu²⁺, and 4,4'-bipyridine. It was found that GAA@GOx@Cu-MOF not only enjoyed merits of high stability, selectivity, and sensitivity but also possessed the character of assembly line work, with about 4.58 times enhanced enzyme activity compared with the free enzyme system. Based on the above characteristics, a highly sensitive screening of GAA inhibitors could be achieved with the detection limit of 7.05 nM for acarbose. Furthermore, the proposed method was successfully applied to the screening of oleanolic acid derivatives as potential antidiabetic drugs. Therefore, it was expected that this work could provide new insights and inspirations for the screening of clinical antidiabetic drugs and for further exploration of functional MOF composites.

Click DNA cycling in combination with gold nanoparticles loaded with quadruplex DNA motifs enable sensitive electrochemical quantitation of the tuberculosis-associated biomarker CFP-10 in sputum

An electrochemical aptamer-based assay is described for the determination of CFP-10 which is an early secretary biomarker of Mycobacterium tuberculosis. CFP-10 is specifically captured by its aptamer and then induces a DNA cross-linking click reaction, the release of CFP-10, and an amplification cycle of repeated CFP-10 release. This mechanism (with dual amplification via DNA click and target release cycle) causes more and more CFP-10 Apt strands on the electrode surface to expose their 5' overhang and to hybridize with the DNA complexes linked to the gold nanoparticles (AuNPs). Consequently, large amounts of AuNPs, each loaded with a number of quadruplex DNA motifs, can be bound on the electrode surface and remarkably enhance the signal. Under optimal conditions, the method has a detection limit as low as 10 pg.mL^-1 of CFP-10. The method was successfully applied to the diagnosis of M. tuberculosis in sputum. Graphical abstract Schematic representation of an electrochemical CFP-10 (10-kDa culture filtrate protein) assay using click DNA cycling in combination with gold nanoparticles loaded with quadruplex DNA motifs. Click chemistry reaction between Dibenzocyclooctyne (DBCO)-DNA and azido-DNA can liberate the CFP-10 antigen for the next cycle, which can be viewed as the first amplification step. G-quadruplex-based DNAzyme is formed due to the guanine-rich sequences of DNA S1, which can be viewed as the second amplification step.

Development of a methodology for reversible chemical modification of silicon surfaces with application in nanomechanical biosensors

Hypervalent tellurium compounds have a particular reactivity towards thiol compounds which are related to their biological properties. In this work, this property was assembled to tellurium-functionalized surfaces. These compounds were used as linkers in the immobilization process of thiolated biomolecules (such as DNA) on microcantilever surfaces. The telluride derivatives acted as reversible binding agents due to their redox properties, providing the regeneration of microcantilever surfaces and allowing their reuse for further biomolecules immobilizations, recycling the functional surface. Initially, we started from the synthesis of 4-((3-((4-methoxyphenyl) tellanyl) phenyl) amino)-4-oxobutanoic acid, a new compound, which was immobilized on a silicon surface. In nanomechanical systems, the detection involved a hybridization study of thiolated DNA sequences. Fluorescence microscopy technique was used to confirm the immobilization and removal of the telluride-DNA system and provided revealing results about the potentiality of applying redox properties to chalcogen derivatives at surfaces.

Carbon dots doped with nitrogen and boron as ultrasensitive fluorescent probes for determination of α-glucosidase activity and its inhibitors in water samples and living cells

An ultrasensitive fluorometric assay is described for the determination of the activity of the enzyme α-glucosidase in waters and living cells. Carbon dots doped with nitrogen and boron (N,B-CDs) were prepared that have excitation/emission peaks at 400/510 nm and a fluorescence quantum yield of 47%. 4-Nitrophenylglucoside is added and then hydrolyzed by α-glucosidase to form yellow 4-nitrophenol which screens off fluorescence due to an inner filter effect. The method was applied to the determination of α-glucosidase activity and has a 3 mU mL^-1 detection limit. It was subsequently applied to the determination of the α-glucosidase inhibitor acarbose which can be determined in a concentration as low as 10 nM (at three times the standard deviation versus slope). The method was also applied to the determination of α-glucosidase activity and acarbose in living HeLa cells and MCF-7 cells. The method is simple, sensitive, and excellently selective. Graphical abstract N,B-CDs as ultrasensitive fluorescence probe for α-glucosidase activity and its inhibitor in waters and living cells based on IFE.