Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

NiFe-LDH/nylon 6 composite electrospun on polypropylene membrane: A new extractive device development for porous membrane protected micro-solid-phase extraction of organophosphate pesticides from fresh fruit juice samples coupled with liquid chromatography tandem mass analysis

A unique strategy for developing porous membrane protected micro-solid phase extraction has been provided. An electrospun composite was fabricated on the sheet of membrane. To this end, NiFe-layered double hydroxide/Nylon 6 composite nanofibers were coated on a polypropylene membrane sheet followed by folding into a pocket shape, which were then utilized as a novel extractive device to extract of organophosphorus pesticides from fresh fruit juice samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The fabricated hybrid composites were successfully characterized. The effective parameters on extraction performance were investigated. LODs were 0.020-0.065 ng mL-1. Excellent linearity (R2≥0.996) was observed between 0.05 and 100.0 ng mL-1. RSDs% were in the range of 3.1-5.8% (intra-day, n = 3) and 2.6-5.5% (inter-day, n = 3×3). Satisfactory related recovery values within the acceptable range of 90.7-111.2% with RSDs% below 6.7% were achieved for the analysis of real samples.

Miniaturized liquid chromatography in environmental analysis. A review

The greater and more widespread use of chemicals, either from industry or daily use, is leading to an increase in the discharge of these substances into the environment. Some of these are known to be hazardous to humans and the environment and are regulated, but there is a large and increasing number of substances which pose a potential risk even at low concentration and are not controlled. In this context, new techniques and methodologies are being developed to deal with this concern. Miniaturized liquid chromatography (LC) emerges as a greener and more sensitive alternative to conventional LC. Furthermore, advances in instrument miniaturization have made possible the development of portable LC instrumentation which may become a promising tool for in-situ monitoring. This work reviews the environmental applications of miniaturized LC over the last 15 years and discusses the different instrumentation, including off- and on-line pretreatment techniques, chromatographic conditions, and contributions to the environmental knowledge.

Into the toxicity potential of an array of parabens by biomimetic liquid chromatography, cell viability assessments and in silico predictions

Five parabens (PBs) i.e., Methylparaben (MP), Ethylparaben (EP), Isopropylparaben (iPrP), Isobutylparaben (iBuP), Benzylparaben (BzP), and their parent compound i.e., para-hydroxy Benzoic Acid (pHBA), were studied both in vitro and in silico. Specifically, we determined their retention on several both protein- (Human Serum Albumin and α1-acidic glycoprotein) and (phospho) lipid- (immobilized artificial membrane (IAM)) based biomimetic stationary phases to evaluate their penetration potential through the biomembranes and their possible distribution in the body. The IAM phases were based either on phosphatidylcholine (PC) analogues i.e., PC.MG and PC.DD2 or on sphingomyelin (SPH). We also assessed their viability effect on breast cancer cells (MCF-7) via MTT assay subjecting the cells to five different PB concentrations i.e., 100 μM, 10 μM, 1 μM, 0.1 μM and 0.01 μM. Finally, their pharmacokinetics and toxicity were assessed by the ADMET Predictor™ software. Isopropylparaben was found to be more active than 17β estradiol (E2) employed as positive control, on the screened cell line inducing cell proliferation up to 150 % more of untreated cells. Other analogues showed only a slight/moderate cell proliferation activity, with parabens having longer/branched side chain showing, on average, a higher proliferation rate. Significant linear direct relationships (for PC.DD2 r2 = 0.89, q2 = 0.86, for SPH r2 = 0.89, q2 = 0.85, for both P value < 0.05) were observed between the difference in proliferative effect between the readout and the control at 0.01 μM concentration and the retention on the IAM phases measured at pH 5.0 for all compounds but pHBA, which is the only analyte of the dataset supporting a carboxylic acid moiety. IAM affinity data measured at pH 7.0 were found to be related to the effective human jejunal permeability as predicted by the software ADMET® Predictor, which is relevant when PBs are added to pharmaceutical and food commodities.

Exciting Advances in Sustainable Spectrophotometric Micro-Quantitation of an Innovative Painkiller "Tramadol and Celecoxib" Mixture in the Presence of a Toxic Impurity, Promoting Greenness and Whiteness Studies

BACKGROUND

Tramadol (TRM) and celecoxib (CLX) form a novel mixture that helps relieve acute pain when other painkillers have no action. It is also reported that these drugs, TRM and CLX, are used to control COVID-19 symptoms.

OBJECTIVE

The current work highlights three important pillars of modern pharmaceutical analysis, which are as follows; impurity profiling, greenness/whiteness studies and simplicity accompanied by sensitivity. Since 4-methyl acetophenone inhibits the human carbonyl reductase enzyme (type I) and since this compound may pose a health risk, it is crucial to regulate its concentration in all dosage forms of CLX.

METHODS

Two simple and green spectrophotometric methods were developed, namely third derivative (D3) and Fourier self- deconvulation (FSD), for resolving severely overlapped spectra of TRM and CLX in the presence of 4-methyl acetophenone (4-MAP) as a process-related impurity in their novel tablet combination.

RESULTS

The two approaches showed acceptable linearity with an excellent correlation coefficient. In both methods, TRM was measured when CLX and 4-methyl acetophenone were zero-crossing. The same procedure was applied for measuring CLX and its process-related impurity 4-MAP.

CONCLUSION

The methodologies developed were thoroughly validated in compliance with ICH (International Council on Harmonisation) guidelines. Student t- and F-tests revealed no statistically significant variation among the current methods and the reported method.

HIGHLIGHTS

No spectrophotometric methods have been published previously for the simultaneous analysis of TRM and CLX along with 4-MAP. As a result, the newly developed spectrophotometric approaches have great relevance and originality in the field of pharmaceutical analysis.

A guide to the use of bioassays in exploration of natural resources

Bioassays are the main tool to decipher bioactivities from natural resources thus their selection and quality are critical for optimal bioprospecting. They are used both in the early stages of compounds isolation/purification/identification, and in later stages to evaluate their safety and efficacy. In this review, we provide a comprehensive overview of the most common bioassays used in the discovery and development of new bioactive compounds with a focus on marine bioresources. We present a comprehensive list of practical considerations for selecting appropriate bioassays and discuss in detail the bioassays typically used to explore antimicrobial, antibiofilm, cytotoxic, antiviral, antioxidant, and anti-ageing potential. The concept of quality control and bioassay validation are introduced, followed by safety considerations, which are critical to advancing bioactive compounds to a higher stage of development. We conclude by providing an application-oriented view focused on the development of pharmaceuticals, food supplements, and cosmetics, the industrial pipelines where currently known marine natural products hold most potential. We highlight the importance of gaining reliable bioassay results, as these serve as a starting point for application-based development and further testing, as well as for consideration by regulatory authorities.

Efficient elimination of carbamazepine using polyacrylonitrile-supported pyridine bridged iron phthalocyanine nanofibers by activating peroxymonosulfate in dark condition

The monoaminotrinitro iron phthalocyanine (FeMATNPc) is used to connect with isonicotinic acid (INA) for amide bonding and axial coordination to synthetic a unique catalyst FeMATNPc-INA, which is loaded in polyacrylonitrile (PAN) nanofibers by electrospinning. The introduction of INA destroys the π-π conjugated stack structure in phthalocyanine molecules and exposes more active sites. The FeMATNPc-INA structure is characterized by X-ray photoelectron spectroscopy and UV-visible absorption spectrum, and the FeMATNPc-INA/PAN structure is characterized by Fourier transform infrared spectroscopy and X-ray diffraction. The FeMATNPc-INA/PAN can effectively activate peroxymonosulfate (PMS) to eliminate carbamazepine (CBZ) within 40 minutes (PMS 1.5 mmol/L) in the dark. The effects of catalyst dosage, PMS concentration, pH and inorganic anion on the degradation of CBZ are investigated. It has been confirmed by electron paramagnetic resonance, gas chromatography-mass spectroscopy and free radical capture experiments that the catalytic system is degraded by •OH, SO4•- and Fe (IV) = O are the major active species, the singlet oxygen (1O2) is the secondary active species. The degradation process of CBZ is analyzed by ultra-high performance liquid chromatography-mass spectrometry and the aromatic compounds have been degraded to small molecular acids.

Network Toxicology Prediction and Molecular Docking-based Strategy to Explore the Potential Toxicity Mechanism of Metformin Chlorination Byproducts in Drinking Water

BACKGROUND

Metformin (MET), a worldwide used drug for treating type 2 diabetes but not metabolized by humans, has been found with the largest amount in the aquatic environment. Two MET chlorination byproducts, including Y and C, were transformed into drinking water during chlorination. However, the potential toxicity of the byproducts in hepatotoxicity and reproduction toxicity remains unclear.

METHODS

The TOPKAT database predicted the toxicological properties of metformin disinfection by-products. The targets of metformin disinfection by-products were mainly obtained from the PharmMapper database, and then the targets of hepatotoxicity and reproductive toxicity were screened from GeneCards. The overlapping targets of toxic component targets and the hepatotoxicity or reproduction toxicity targets were regarded as the key targets. Then, the STRING database analyzed the key target to construct a protein-protein interaction network (PPI) and GO, and KEGG analysis was performed by the DAVID platform. Meanwhile, the PPI network and compound- target network were constructed by Cytoscape 3.9.1. Finally, Discovery Studio 2019 software was used for molecular docking verification of the two toxic compounds and the core genes.

RESULTS

Y and C exhibited hepatotoxicity, carcinogenicity, and mutagenicity evaluated by TOPKAT. There were 22 potential targets relating to compound Y and hepatotoxicity and reproduction toxicity and 14 potential targets relating to compound C and hepatotoxicity and reproduction toxicity. PPI network analysis showed that SRC, MAPK14, F2, PTPN1, IL2, MMP3, HRAS, and RARA might be the key targets; the KEGG analysis indicated that compounds Y and C caused hepatotoxicity through Hepatitis B, Pathways in cancer, Chemical carcinogenesis-reactive oxygen species, Epstein-Barr virus infection; compound Y and C caused reproduction toxicity through GnRH signaling pathway, Endocrine resistance, Prostate cancer, Progesterone-mediated oocyte maturation. Molecular docking results showed that 2 compounds could fit in the binding pocket of the 7 hub genes.

CONCLUSION

This study preliminarily revealed the potential toxicity and possible toxicity mechanism of metformin disinfection by-products and provided a new idea for follow-up research.

ZIF67-derived porous carbon-reinforced electrospun nanofiber as an extractive phase for on-chip micro-solid-phase extraction of antifungals from biological fluids prior to liquid chromatography tandem mass spectrometry

With a view to improving applicability as a sorbent while overcoming the challenges associated with its powdery nature, cobalt-doped zeolitic imidazolate framework (ZIF 67)-derived nanoporous carbon (Co-NPC) was employed as an additive in nanofiber through the process of electrospinning. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis were used to characterize the resulting nanocomposite. A microfluidic chip device with four layers, including two layers entailing spiral channels, was designed and employed to assess the analytical performance of the fabricated Co-NPC-reinforced electrospun composite. To do so, a folded piece of electrospun composite was sandwiched between two layers with spiral channels. Therefore, both sides of the folded composite acted as a sorptive phase to extract antifungal drugs as target analytes. The significant factors affecting the efficiency of the extraction process were investigated and optimized. Subsequently, the technique was verified through the utilization of liquid chromatography-tandem mass spectrometry (LC-MS/MS) by employing optimal parameters. The optimal conditions were applied to evaluate the figures of merit. A linear range was obtained for antifungal drugs within the range 0.25-200.0 ng ml-1 with an R2 value of ≥ 0.9914. The method demonstrated detection limits ranging between 0.08 and 0.40 ng ml-1. The intra-day and inter-day precisions were less than 6.9%. Relative recoveries exhibited variations between 91.4-106.8%, 95.9-103.6%, and 96.4-109.3% for ketoconazole, clotrimazole, and miconazole, respectively. The proposed approach yielded satisfactory results, demonstrating its efficiency.

Impact of per- and polyfluorinated alkyl substances (PFAS) on the marine environment: Raising awareness, challenges, legislation, and mitigation approaches under the One Health concept

Per- and polyfluorinated alkyl substances (PFAS) have long been known for their detrimental effects on the ecosystems and living organisms; however the long-term impact on the marine environment is still insufficiently recognized. Based on PFAS persistence and bioaccumulation in the complex marine food network, adverse effects will be exacerbated by global processes such as climate change and synergies with other pollutants, like microplastics. The range of fluorochemicals currently included in the PFAS umbrella has significantly expanded due to the updated OECD definition, raising new concerns about their poorly understood dynamics and negative effects on the ocean wildlife and human health. Mitigation challenges and approaches, including biodegradation and currently studied materials for PFAS environmental removal are proposed here, highlighting the importance of ongoing monitoring and bridging research gaps. The PFAS EU regulations, good practices and legal frameworks are discussed, with emphasis on recommendations for improving marine ecosystem management.

Calf thymus ds-DNA intercalation with pendimethalin herbicide at the surface of ZIF-8/Co/rGO/C3N4/ds-DNA/SPCE; A bio-sensing approach for pendimethalin quantification confirmed by molecular docking study

Pendimethalin (PND) is a herbicide that is regarded to be possibly carcinogenic to humans and toxic to the environment. Herein, we fabricated a highly sensitive DNA biosensor based on ZIF-8/Co/rGO/C₃N₄ nanohybrid modification of a screen-printed carbon electrode (SPCE) to monitor PND in real samples. The layer-by-layer fabrication pathway was conducted to construct ZIF-8/Co/rGO/C₃N₄/ds-DNA/SPCE biosensor. The physicochemical characterization techniques confirmed the successful synthesis of ZIF-8/Co/rGO/C₃N₄ hybrid nanocomposite, as well as the appropriate modification of the SPCE surface. The utilization of ZIF-8/Co/rGO/C₃N₄ nanohybrid as a modifier was analyzed using. The electrochemical impedance spectroscopy results showed that the modified SPCE exhibited significantly lowered charge transfer resistance due to the enhancement of its electrical conductivity and facilitation of the transfer of charged particles. The proposed biosensor successfully quantified PND in a wide concentration range of 0.01-35 μM, with a limit of detection (LOD) value of 8.0 nM. The PND monitoring capability of the fabricated biosensor in real samples including rice, wheat, tap, and river water samples was verified with a recovery range of 98.2-105.6%. Moreover, to predict the interaction sites of PND herbicide with DNA, the molecular docking study was performed between the PND molecule and two sequence DNA fragments and confirmed the experimental findings. This research sets the stage for developing highly sensitive DNA biosensors that will be used to monitor and quantify toxic herbicides in real samples by fusing the advantages of nanohybrid structures with crucial knowledge from a molecular docking investigation.

A rapid and green GC-MS method for the sampling of volatile organic compounds in spices and flowers by concurrent headspace single-drop microextraction and solid-phase microextraction

The equilibrium rather than the exhaustive nature of headspace single-drop microextraction (HS-SDME) and headspace solid-phase microextraction (HS-SPME) allowed the concurrent sampling of volatile organic compounds (VOCs) on the same sample in the same vial in a dual extraction configuration. This has avoided the necessity of conducting a separate set of experiments and was found to produce results in the time duration of a single sample preparation experiment. The results obtained by HS-SDME were validated against those found by the standard method of HS-SPME. Rectilinear calibration was made for certain VOCs tested as analytes over the range of 0.01-8 μg g^-1, and the average values of R², LOD and LOQ were found to be, respectively, 0.9992, 1.9 ng g^-1 and 5.7 ng g^-1 in HS-SDME, and 0.9991, 3.1 ng g^-1 and 9.1 ng g^-1 in HS-SPME. The spiked recoveries and RSD were, respectively, 100.5% and 3.3% in HS-SDME and 98.1% and 3.6% in HS-SPME. HS-SDME is convenient to perform and produce results in a much cheaper way than HS-SPME and free from the inconveniences of memory effects. With GC-MS, this method has also been implemented as a rapid, reliable and green procedure (by GAPI and AGREE tools) for the sampling of VOCs in real samples of spices, flowers, and a beetle nut chewing sample illicitly containing tobacco.

Degradation of contaminants of emerging concern in a secondary effluent using synthesized MOF-derived photoanodes: A comparative study between photo-, electro- and photoelectrocatalysis

Three metal-organic framework (MOF)-based photoanodes were prepared by deposition on TiO₂ nanotubes using Ti as substrate (Ti/TiO₂NT): i) Ti/TiO₂NT-Au@ZIF-8, ii) Ti/TiO₂NT-Ru₃(BTC)₂, iii) Ti/TiO₂NT-UiO-66(Zr)NH₂. These photoanodes were characterized by FEG-SEM, EDX and DRX. The analyses showed a successful modification and a high homogeneity of the different MOFs on the Ti/TiO₂NT surface. The photoanodes were studied in the degradation of Contaminants of Emerging Concern (CECs) in a spiked secondary effluent from a Municipal Wastewater Treatment Plant (MWWTP). Sodium diclofenac (DCF), sulfamethazine (SMT) and carbamazepine (CBZ) were used as CECs at low concentration (200 μg/L each CEC). The samples were preconcentrated using Solid Phase Extraction (SPE) and analyzed by a HPLC-DAD system. The MOF-based photoanodes exhibited a high photoelectrochemical (PEC) activity towards the oxidation of CECs, achieving up to 50%, 70% and 80% of removal using Ti/TiO₂NT-Au@ZIF-8, Ti/TiO₂NT-UiO-66(Zr)NH₂, Ti/TiO₂NT-Ru₃(BTC), respectively. The influence of the generation of hydroxyl radical was then studied. The results indicate that PEC degradation using Ti/TiO₂NT-Ru₃(BTC)₂ and Ti/TiO₂NT-UiO-66(Zr)NH₂ is more affected by the concentration of the radical.

Optimization of headspace solid-phase microextraction of volatile organic compounds from dry soil samples by porous coatings using COMSOL Multiphysics

Headspace solid-phase microextraction (HSSPME) is one of the simplest and cost-efficient sample preparation approaches for determination of volatile organic compounds (VOCs) in soil. This study was aimed at the development of the model for numerical optimization of HSSPME of volatile organic compounds from dry soil samples by porous coatings using COMSOL Multiphysics (CMP). ‘Transport of Diluted Species in Porous Medium’ physics was used for modeling. Effect of sample mass, pressure, fiber-headspace and soil-headspace distribution constants on extraction profiles and time of 95% equilibrium has been studied using the developed model. Equilibrium extraction under atmospheric pressure (1 atm) can take up to 97 min, while under vacuum (0.0313 atm) – 2.3 min. Equilibration time under vacuum was 42-43 times lower than under 1 atm at all studied distribution constants and sample masses. The developed model was modified for optimization of pre-incubation time using ‘Transport of Diluted Species’ physics. According to the obtained plots, 95% equilibration time can reach 13.3 min and depends on both sample mass and soil-headspace distribution constant of the analyte. The developed model can be recommended for optimization of pressure, preincubation and extraction time when fiber-headspace and soil-headspace distribution constants, soil porosity and density are known.

A handheld 3D-printed microchip for simple integration of the H2O2-producing enzymatic reactions with subsequent chemiluminescence detection: Application for sugars

Herein, a novel lab-on-a-chip (LoC) device fabricated by 3D printing based on H₂O₂-producing enzymatic reactions with sensitive chemiluminescence (CL) detection was developed to measure different sugars, including glucose, fructose, sucrose, and maltose, in honey, juice, and rice flour samples. The pumpless microchip included two main parts, separated by new cone-shape blocking valves; part A for sample introduction and subsequent enzymatic reaction, besides the CL reagent (luminol) container, and part B for detection. The specific enzyme(s) were embedded into the pores of the zinc zeolite-imidazole framework (ZIF-8) to improve their storage stability. By opening the valves, H₂O₂ produced by enzymatic reaction and luminol could flow through the designed channels into the detection zone on part B, where a 2D cobalt-imidazole framework was embedded to improve the luminol-H₂O₂ CL emission. The obtained signal was proportional to the considered sugar concentration, with the detection limits range of 20-268 µM.

Waterproof Cellulose-Based Substrates for In-Drop Plasmonic Colorimetric Sensing of Volatiles: Application to Acid-Labile Sulfide Determination in Waters

The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core-shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H₂S, I₂, and Br₂, whereas AuNRs hold promise for I₂, Br₂, and Hg⁰ colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H₂S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91-107%) when applied to the analysis of environmental waters.

Flow-Injection Methods in Water Analysis-Recent Developments

Widespread demand for the analysis and control of water quality and supply for human activity and ecosystem sustainability has necessitated the continuous improvement of water analysis methods in terms of their reliability, efficiency, and costs. To satisfy these requirements, flow-injection analysis using different detection methods has successfully been developed in recent decades. This review, based on about 100 original research papers, presents the achievements in this field over the past ten years. Various methodologies for establishing flow-injection measurements are reviewed, together with microfluidics and portable systems. The developed applications mostly concern not only the determination of inorganic analytes but also the speciation analysis of different elements, and the determination of several total indices of water quality. Examples of the determination of organic residues (e.g., pesticides, phenolic compounds, and surfactants) in natural surface waters, seawater, groundwater, and drinking water have also been identified. Usually, changes in the format of manual procedures for flow-injection determination results in the improvement of various operational parameters, such as the limits of detection, the sampling rate, or selectivity in different matrices.

Development of hybrid monoliths incorporating metal–organic frameworks for stir bar sorptive extraction coupled with liquid chromatography for determination of estrogen endocrine disruptors in water and human urine samples

A novel coating based on hybrid monolith with metal–organic framework (MOF) onto conventional Teflon-coated magnetic stir bars was developed. For this purpose, the external surface of the Teflon stir bar was firstly vinylized in order to immobilize a glycidyl methacrylate (GMA)–based polymer onto the magnet. Then, an amino-modified MOF of type MIL-101 (NH₂-MIL-101(Al)) was covalently attached to the GMA-based monolith. After the synthesis process, several parameters affecting extraction of target estrogens by stir bar sorptive extraction (SBSE) including pH, ionic strength, extraction time, stirring rate, desorption solvent, and desorption time were also investigated. The resulting hybrid monolith was evaluated as SBSE sorbent for extraction of three estrogens (estrone, 17β-estradiol, estriol) and synthetic 17β-ethinylestradiol from water and human urine samples followed by HPLC with fluorescence detection (excitation and emission wavelengths, 280 and 310 nm, respectively). Under the optimal experimental conditions, the analytical figures of the method were established, achieving satisfactory limits of detection in the range of 0.015–0.58 µg L⁻¹, recovery results ranging from 70 to 95% with RSD less than 6%, and precision values (intra- and inter-extraction units) below 6%.

Spot tests: past and present

Microchemistry, i.e., the chemistry performed at the scale of a microgram or less, has its roots in the late eighteenth and early nineteenth centuries. In the first half of the twentieth century a wide range of spot tests have been developed. For didactic reasons, they are still part of the curriculum of chemistry students. However, they are even highly important for applied analyses in conservation of cultural heritage, food science, forensic science, clinical and pharmacological sciences, geochemistry, and environmental sciences. Modern pregnancy tests, virus tests, etc. are the most recent examples of sophisticated spot tests. The present ChemTexts contribution aims to provide an overview of the past and present of this analytical methodology.

Major contaminants of emerging concern in soils: a perspective on potential health risks

Soil pollution by the contaminants of emerging concern (CECs) or emerging contaminants deserves attention worldwide because of their toxic health effects and the need for developing regulatory guidelines. Though the global soil burden by certain CECs is in several metric tons, the source-tracking of these contaminants in soil environments is difficult due to heterogeneity of the medium and complexities associated with the interactive mechanisms. Most CECs have higher affinities towards solid matrices for adsorption. The CECs alter not only soil functionalities but also those of plants and animals. Their toxicities are at nmol to μmol levels in cell cultures and test animals. These contaminants have a higher propensity in accumulating mostly in root-based food crops, threatening human health. Poor understanding on the fate of certain CECs in anaerobic environments and their transfer pathways in the food web limits the development of effective bioremediation strategies and restoration of the contaminated soils and endorsement of global regulatory efforts. Despite their proven toxicities to the biotic components, there are no environmental laws or guidelines for certain CECs. Moreover, the information available on the impact of soil pollution with CECs on human health is fragmentary. Therefore, we provide here a comprehensive account on five significantly important CECs, viz., (i) PFAS, (ii) micro/nanoplastics, (iii) additives (biphenyls, phthalates), (iv) novel flame retardants, and (v) nanoparticles. The emphasis is on (a) degree of soil burden of CECs and the consequences, (b) endocrine disruption and immunotoxicity, (c) genotoxicity and carcinogenicity, and (d) soil health guidelines.

Contaminants of emerging concern: sources, soil burden, human exposure, and toxicities.

Paper-Based Analytical Devices for Colorimetric and Luminescent Detection of Mercury in Waters: An Overview

Lab-on-paper technologies, also known as paper-based analytical devices (PADs), have received increasing attention in the last years, and nowadays, their use has spread to virtually every application area, i.e., medical diagnostic, food safety, environmental monitoring, etc. Advantages inherent to on-field detection, which include avoiding sampling, sample preparation and conventional instrumentation in central labs, are undoubtedly driving many developments in this area. Heavy metals represent an important group of environmental pollutants that require strict controls due to the threat they pose to ecosystems and human health. In this overview, the development of PADs for Hg monitoring, which is considered the most toxic metal in the environment, is addressed. The main emphasis is placed on recognition elements (i.e., organic chromophores/fluorophores, plasmonic nanoparticles, inorganic quantum dots, carbon quantum dots, metal nanoclusters, etc.) employed to provide suitable selectivity and sensitivity. The performance of both microfluidic paper-based analytical devices and paper-based sensors using signal readout by colorimetry and luminescence will be discussed.

Evolution of nucleic acids biosensors detection limit III

This review is an update of two previous ones focusing on the limit of detection of electrochemical nucleic acid biosensors allowing direct detection of nucleic acid target (miRNA, mRNA, DNA) after hybridization event. A classification founded on the nature of the electrochemical transduction pathway is established. It provides an overall picture of the detection limit evolution of the various sensor architectures developed during the last three decades and a critical report of recent strategies.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Nanomaterial-Integrated Cellulose Platforms for Optical Sensing of Trace Metals and Anionic Species in the Environment

The development of disposable sensors that can be easily adapted to every analytical problem is currently a hot topic that is revolutionizing many areas of science and technology. The need for decentralized analytical measurements at real time is increasing for solving problems in areas such as environment pollution, medical diagnostic, food quality assurance, etc., requiring fast action. Despite some current limitations of these devices, such as insufficient detection capability at (ultra)trace level and risk of interferent effects due to matrix, they allow low-cost analysis, portability, low sample consumption, and fast response. In the last years, development of paper-based analytical devices has undergone a dramatic increase for on-site detection of toxic metal ions and other pollutants. Along with the great availability of cellulose substrates, the immobilization of receptors providing enhanced recognition ability, such as a variety of nanomaterials, has driven the design of novel sensing approaches. This review is aimed at describing and discussing the different possibilities arisen with the use of different nanoreceptors (e.g., plasmonic nanoparticles, quantum dots, carbon-based fluorescent nanoparticles, etc.) immobilized onto cellulose-based substrates for trace element detection, their advantages and shortcomings.