Injectable and biodegradable thermosensitive hydrogels loaded with PHBHHx nanoparticles for the sustained and controlled release of insulin

Preparation, Characterization and In vitro Evaluation of Insulin-PHBV Nanoparticles/Alginate Hydrogel Composite System for Prolonged Delivery of Insulin

PURPOSE

In the present study, biodegradable poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles (NPs) containing insulin were loaded in sodium alginate/jeffamine (ALG/jeff) hydrogel for prolonged delivery of insulin. The main aim of this work was to fabricate an efficient insulin delivery system to improve patient adherence by decreasing the repetition of injections.

METHODS

Swelling and morphological properties and crosslinking efficiency of ALG/jeff hydrogel were assessed. The composite hydrogel was prepared by adding PHBV NPs to ALG/jeff hydrogel concurrently with crosslinking process. The morphology and loading capacity of composite hydrogel were analyzed.

RESULTS

Circular dichroism measurement demonstrated that insulin remains stable following fabrication process. The release profile exhibited 54.6 % insulin release from composite hydrogel within 31 days with minor initial burst release equated to nanoparticles and hydrogels. MTT cell viability analysis was performed by applying L-929 cell line and no cytotoxic effect was observed.

CONCLUSIONS

Favorable results clearly introduced fabricated composite hydrogel as an excellent candidate for drug delivery systems and also paves the route for prolonged delivery systems of other proteins.

A review on revolutionizing ophthalmic therapy: Unveiling the potential of chitosan, hyaluronic acid, cellulose, cyclodextrin, and poloxamer in eye disease treatments

Ocular disorders, encompassing both common ailments like dry eye syndrome and more severe situations for instance age-related macular degeneration, present significant challenges to effective treatment due to the intricate architecture and physiological barriers of the eye. Polysaccharides are emerging as potential solutions for drug delivery to the eyes due to their compatibility with living organisms, natural biodegradability, and adhesive properties. In this review, we explore not only the recent advancements in polysaccharide-based technologies and their transformative potential in treating ocular illnesses, offering renewed optimism for both patients and professionals but also anatomy of the eye and the significant obstacles hindering drug transportation, followed by an investigation into various drug administration methods and their ability to overcome ocular-specific challenges. Our focus lies on biological adhesive polymers, including chitosan, hyaluronic acid, cellulose, cyclodextrin, and poloxamer, known for their adhesive characteristics enhancing drug retention on ocular surfaces and increasing bioavailability. A detailed analysis of material designs used in ophthalmic formulations, such as gels, lenses, eye drops, nanofibers, microneedles, microspheres, and nanoparticles, their advantages and limitations, the potential of formulations in improving therapeutic outcomes for various eye conditions. Moreover, we underscore the discovery of novel polysaccharides and their potential uses in ocular drug delivery.

Directed osteogenic differentiation of human bone marrow mesenchymal stem cells via sustained release of BMP4 from PBVHx-based nanoparticles

Bone Morphogenetic Protein 4 (BMP4) is crucial for bone and cartilage tissue regeneration, essential in medical tissue engineering, cosmetology, and aerospace. However, its cost and degradation susceptibility pose significant clinical challenges. To enhance its osteogenic activity while reducing dosage and administration frequency, we developed a novel long-acting BMP4 delivery system using poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) (PBVHx) nanoparticles with soybean lecithin-modified BMP4 (sBP-NPs). These nanoparticles promote directed osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) through sustained BMP4 release. sBP-NPs exhibited uniform size (100-200 nm) and surface charges, with higher BMP4 entrapment efficiency (82.63 %) compared to controls. After an initial burst release within 24 h, sBP-NPs achieved 80 % cumulative BMP4 release within 20 days, maintaining levels better than control BP-NPs with unmodified BMP4. Co-incubation and nanoparticle uptake experiments confirmed excellent biocompatibility of sBP-NPs, promoting hBMSC differentiation towards osteogenic lineage with increased expression of type I collagen, calcium deposition, and ALP activity (> 20,000 U/g protein) compared to controls. Moreover, hBMSCs treated with sBP-NPs exhibited heightened expression of osteogenic genetic markers, surpassing control groups. Hence, this innovative strategy of sustained BMP4 release from sBP-NPs holds potential to revolutionize bone regeneration in minimally invasive surgery, medical cosmetology or space environments.

Injectable systems for long-lasting insulin therapy

Insulin therapy is the mainstay to treat diabetes characterizedd by hyperglycemia. However, its short half-life of only 4-6 min limits its effectiveness in treating chronic diabetes. Advances in recombinant DNA technology and protein engineering have led to several insulin analogue products that have up to 42 h of glycemic control. However, these insulin analogues still require once- or twice-daily injections for optimal glycemic control and have poor patient compliance and adherence issues. To achieve insulin release for more than one day, different injectable delivery systems including microspheres, in situ forming depots, nanoparticles and composite systems have been developed. Several of these delivery systems have advanced to clinical trials for once-weekly insulin injection. This review comprehensively summarizes the developments of injectable insulin analogs and delivery systems covering the whole field of injectable long-lasting insulin technologies from prototype design, preclinical studies, clinical trials to marketed products for the treatment of diabetes.

Prevention of bacterial biofilm formation on orthodontic brackets by non-crosslinked chitosan coating

During orthodontic treatment, the patients are susceptible to dental caries as a result of the bacterial adhesion and biofilm formation around the orthodontic brackets. Prevention of the caries-related biofilm formation is of significance for maintaining both aesthetics and health of the teeth. Herein, the brackets were functionalized with antibacterial activity via coating a layer of non-crosslinked chitosan (CS). We firstly demonstrated the ability of free CS scaffolds (not coated on brackets) to inhibit the formation of Streptococcus mutans biofilms (inhibition rate 94.3 % for CS-0.3 mg) and to eradicate the mature biofilms (biofilm loss rate 99.8 % for CS-1.2 mg). Further, the inhibition of S. mutans biofilm formation on brackets by CS coating was investigated for the first time. As a result, the CS-coated brackets (Br-CS) kept the great biofilm inhibition capacity of free CS scaffolds. In detail, the Br-CS, prepared by immersing brackets in CS solutions (containing 1.0, 2.5, 5.0 and 10 mg/mL CS) and freeze-drying, showed the biofilm inhibition rate of 48.5 %, 88.6 %, 96.4 % and 99.6 %, respectively. In conclusion, coating orthodontic brackets with the non-crosslinked CS is a potential approach for inhibiting biofilm formation and protecting patients from dental caries.

Advances in the Development of Nano-Engineered Mechanically Robust Hydrogels for Minimally Invasive Treatment of Bone Defects

Injectable hydrogels were discovered as attractive materials for bone tissue engineering applications given their outstanding biocompatibility, high water content, and versatile fabrication platforms into materials with different physiochemical properties. However, traditional hydrogels suffer from weak mechanical strength, limiting their use in heavy load-bearing areas. Thus, the fabrication of mechanically robust injectable hydrogels that are suitable for load-bearing environments is of great interest. Successful material design for bone tissue engineering requires an understanding of the composition and structure of the material chosen, as well as the appropriate selection of biomimetic natural or synthetic materials. This review focuses on recent advancements in materials-design considerations and approaches to prepare mechanically robust injectable hydrogels for bone tissue engineering applications. We outline the materials-design approaches through a selection of materials and fabrication methods. Finally, we discuss unmet needs and current challenges in the development of ideal materials for bone tissue regeneration and highlight emerging strategies in the field.

A biodegradable injectable fluorescent polyurethane-oxidized dextran hydrogel for non-invasive monitoring

Hydrogels have been extensively used in the field of biomedical engineering. In order to achieve non-invasive and real-time visualization of the in vivo status of hydrogels, we designed a fluorescent polyurethane-oxidized dextran (PU-OD) hydrogel with good injectability and self-healing properties, which was cross-linked from a tetraphenyl ethylene (TPE)-containing fluorescent polyurethane emulsion with oxidized dextran by dynamic acylhydrazone bonds. The hydrogel can be used as a visual platform for drug delivery as well as monitoring its own degradation. The network structure of the hydrogel gave it drug-loading capability, and the acylhydrazone bond enabled its pH-responsive drug release. Meanwhile, the PU-OD hydrogel could undergo fluorescence resonance transfer with doxorubicin hydrochloride, showing its potential application in monitoring drug release. In addition, fluorometric and weighing methods were performed to monitor the degradation behavior of the hydrogels in vivo and in vitro, respectively, showing that the non-invasive fluorometric method can be consistent with the invasive weighing method. This work highlights that the introduction of aggregation-induced emission molecules into polyurethanes provides a visual platform that allows for non-invasive monitoring of the material without affecting its own function, which is convenient and less damaging to the body or animals. Consequently, it possesses excellent and promising potential in biomedical materials technologies.

Carbohydrate polymer-based bioadhesive formulations and their potentials for the treatment of ocular diseases: A review

Eyes are directly exposed to the outer environment and susceptible to infections, leading to various ocular disorders. Local medication is preferred to treat eye diseases due to its convenience and compliance. However, the rapid clearance of the local formulations highly limits the therapeutic efficacy. In the past decades, several carbohydrate bioadhesive polymers (CBPs), such as chitosan and hyaluronic acid, have been used in ophthalmology for sustained ocular drug delivery. These CBP-based delivery systems have improved the treatment of ocular diseases to a large extent but also caused some undesired effects. Herein, we aim to summarize the applications of some typical CBPs (including chitosan, hyaluronic acid, cellulose, cyclodextrin, alginate and pectin) in treating ocular diseases from the general view of ocular physiology, pathophysiology and drug delivery, and to provide a comprehensive understanding of the design of the CBP-based formulations for ocular use. The patents and clinical trials of CBPs for ocular management are also discussed. In addition, a discussion on the concerns of CBPs in clinical use and the possible solutions is presented.

Photothermal and natural activity-based synergistic antibacterial effects of Ti3C2Tx MXene-loaded chitosan hydrogel against methicillin-resistant Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) has strong resistance to antibiotic therapy. In this regard, developing antibiotic-free antibacterial agents is of great significance to treat MRSA infections. Herein, we loaded Ti₃C₂T_x MXene nanomaterial in the non-crosslinked chitosan (CS) hydrogel. The obtained MX-CS hydrogel is expected to not only adsorb MRSA cells via CS-MRSA interactions, but also gather the MXene-induced photothermal hyperthermia, achieving the efficient and intensive anti-MRSA photothermal therapy. As a result, under NIR irradiation (808 nm, 1.6 W/cm², 5 min), MX-CS showed a greater photothermal effect than MXene alone did (30 μg/mL, 49.9 °C for MX-CS and 46.5 °C for MXene). Importantly, MRSA cells were rapidly adsorbed on MX-CS hydrogel (containing 30 μg/mL MXene) and completely inhibited (99.18 %) under NIR irradiation for 5 min. In contrast, MXene (30 μg/mL) and CS hydrogel alone only inhibited 64.52 % and 23.72 % MRSA, respectively, significantly lower than the inhibition caused by MX-CS (P < 0.001). Interestingly, when the hyperthermia was depleted by a 37 °C water bath, the bacterial inhibition rate of MX-CS significantly decreased to 24.65 %. In conclusion, MX-CS hydrogel has a remarkable synergistic anti-MRSA activity by gathering MRSA cells and MXene-induced hyperthermia, and may have great potentials in treating MRSA-infected diseases.

Biosynthesis and Characterization of Calcium Oxide Nanoparticles from Citrullus colocynthis Fruit Extracts; Their Biocompatibility and Bioactivities

Modern nanotechnology encompasses every field of life. Nowadays, phytochemically fabricated nanoparticles are being widely studied for their bioactivities and biosafety. The present research studied the synthesis, characterization, stability, biocompatibility, and in vitro bioactivities of calcium oxide nanoparticles (CaONPs). The CaONPs were synthesized using Citrullus colocynthis ethanolic fruit extracts. Greenly synthesized nanoparticles had an average size of 35.93 ± 2.54 nm and showed an absorbance peak at 325 nm. An absorbance peak in this range depicts the coating of phenolic acids, flavones, flavonols, and flavonoids on the surface of CaONPs. The XRD pattern showed sharp peaks that illustrated the preferred cubic crystalline nature of triturate. A great hindrance to the use of nanoparticles in the field of medicine is their extremely reactive nature. The FTIR analysis of the CaONPs showed a coating of phytochemicals on their surface, due to which they showed great stability. The vibrations present at 3639 cm^-1 for alcohols or phenols, 2860 cm^-1 for alkanes, 2487 cm^-1 for alkynes, 1625 cm^-1 for amines, and 1434 cm^-1 for carboxylic acids and aldehydes show adsorption of phytochemicals on the surface of CaONPs. The CaONPs were highly stable over time; however, their stability was slightly disturbed by varying salinity and pH. The dialysis membrane in vitro release analysis revealed consistent nanoparticle release over a 10-h period. The bioactivities of CaONPs, C. colocynthis fruit extracts, and their synergistic solution were assessed. Synergistic solutions of both CaONPs and C. colocynthis fruit extracts showed great bioactivity and biosafety. The synergistic solution reduced cell viability by only 14.68% and caused only 16% hemolysis. The synergistic solution inhibited Micrococcus luteus slightly more effectively than streptomycin, with an activity index of 1.02. It also caused an 83.87% reduction in free radicals.

A review on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] and genetic modifications that affect its production

Polyhydroxyalkanoates (PHAs) have garnered global attention to replace petroleum-based plastics in certain applications due to their biodegradability and sustainability. Among the different types of PHAs, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] copolymer has similar properties to commodity plastics, making them a suitable candidate to replace certain types of single-use plastics, medical devices, and packaging materials. The degradation rate of P(3HB-co-3HHx) is faster than the commercial petroleum-based plastics which take a very long time to be degraded, causing harmful pollution to both land and marine ecosystem. The biodegradability of the P(3HB-co-3HHx) is also dependent on its 3HHx molar composition which in turn influences the crystallinity of the material. Various metabolic pathways like the common PHA biosynthesis pathway, which involves phaA, phaB, and phaC, β-oxidation, and fatty acids de novo synthesis are used by bacteria to produce PHA from different carbon sources like fatty acids and sugars, respectively. There are various factors affecting the 3HHx molar composition of P(3HB-co-3HHx), like PhaCs, the engineering of PhaCs, and the metabolic engineering of strains. It is crucial to control the 3HHx molar composition in the P(3HB-co-3HHx) as it will affect its properties and applications in different fields.

Investigation of the Impact of Hydrolytically Cleavable Groups on the Stability of Poly(ethylene glycol) Based Hydrogels Cross-Linked via the Inverse Electron Demand Diels-Alder (iEDDA) Reaction

Eight-armed poly(ethylene glycol) (PEG) hydrogels cross-linked via inverse electron demand Diels-Alder reaction between norbornene and tetrazine groups are promising materials for long-term protein delivery. While a controlled release over 265 days is achieved for 15% w/v hydrogels in the previous study, the material shows high stability over 500 days despite having cleavable ester linkages between the PEG macromonomers and their functionalities. In this study, the hydrolyzable ester linkers in the PEG-norbornene precursor structure are exchanged to reduce the degradation time. To this end, 3,6-epoxy-1,2,3,6-tetrahydrophthalimide, phenyl carbamate, carbonate ester, and phenyl carbonate ester are introduced as degradable functional groups. Oscillatory shear experiments reveal that they are not affected the in situ gelation. All hydrogel types have gel points of less than 20 s even at a low polymer concentration of 5% w/v. Hydrogels with varying polymer concentrations have similar mesh sizes, all of which fell in the range of 4-12 nm. The inclusion of phenyl carbonate ester accelerates degradation considerably, with complete dissolution of 15% w/v hydrogels after 302 days of incubation in phosphate buffer (pH 7.4). Controlled release of 150 kDa fluorescein isothiocyanate-dextran over a period of at least 150 days is achieved with 15% w/v hydrogels.

Biopolymeric nanocarrier: an auspicious system for oral delivery of insulin

Subcutaneous administration of insulin has been practiced for the clinical supervision of diabetes pathogenesis but it is often ineffective to imitate the glucose homeostasis and is always invasive. Therefore, it causes patient discomfort and infection of local tissue. These issues lead to finding an alternative route for insulin delivery that could be effective, promising, and non-invasive. However, delivery of insulin orally is the most suitable route but the rapid breakdown of insulin by the gastrointestinal enzymes becomes a major barrier to this method. Therefore, nanocarriers (which guard insulin against degradation and facilitate its uptake) are preferred for oral insulin delivery. Among various categories of nanocarriers, bio-polymeric nanocarriers draw special attention owing to their hydrophilic, non-toxic, and biodegradable nature. This review provides a detailed overview of insulin-loaded biopolymer-based nanocarriers, which give future direction in the optimization and development of a clinically functional formulation for their effective and safe delivery.

Amphiphilic Cationic Peptide-Coated PHA Nanosphere as an Efficient Vector for Multiple-Drug Delivery

Amphiphilic core-shell (ACS) nanoparticles are gaining increasing research interest for multi-drug delivery in cancer therapy. In this work, a new cationic peptide-coated PHA nanosphere was prepared by self-assembly of a hydrophobic core of biodegradable poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and a hydrophilic shell of fusion proteins of PHA granule-associated protein (PhaP) and cationic peptide RALA through a strong hydrophobic effect. The hydrophobic drug curcumin (Cur) was encapsulated in PHBHHx nanoparticles. The chemotherapy drug 5-fluorouracil (5-FU) was administered in the form of its metabolite oligomeric 5-fluorodeoxyuridine (FUdR). Fifteen consecutive FUdR (FUdR_15S) were adsorbed on the surface of PHBHHx nanoparticles by electrostatic interaction with RALA to form Cur@PHBX-PR/FUdR_15S. Such amphiphilic cationic nanospheres had 88.3% EE of Cur and the drug loading of Cur and FUdR were 7.8% and 12.1%. The dual-drug-loaded nanospheres showed a time-differential release of Cur and FUdR. In addition, Cur@PHBX-PR/FUdR_15S exhibited excellent anticancer activity and played a vital role in promoting the synergistic effect of FUdR and Cur in gastric cancer cells. The exploration of antitumor mechanisms demonstrated that Cur improved the activity of apoptosis-related proteins and cancer cells sensitized to FUdR. This amphiphilic core-shell system can serve as a general platform for sequential delivery of multiple drugs to treat several cancer cells.

Improvement of the bladder perfusion curative effect through tight junction protein degradation induced by magnetic temperature-sensitive hydrogels

Postoperative intravesical instillation of chemotherapy is a routine procedure for non-muscular invasive bladder cancer (NMIBC). However, traditional bladder perfusion methods have insufficient exposure time, resulting in unsatisfactory therapeutic effects. In the present study, a chitosan (CS)-based in situ forming depot (ISFD) delivery system, including Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MNP), CS, and β-glycerophosphate (GP) as main components, was synthesized. Pirarubicin (THP), as a chemotherapeutic drug, was loaded into the new system. Results showed that our carrier system (Fe₃O₄-THP-CS/GP) was converted into gel and attached to the bladder wall, possessing loose network structures with magnetic targeting and sustained release properties. Moreover, its retention time in bladder was more than 72 h accompanied by a suitable expansion rate and good degradation characteristics. The antitumor activities of Fe₃O₄-THP-CS/GP were more effective both in vitro and in vivo than the free THP solution. In the study of its mechanism, results showed that Fe₃O₄-THP-CS/GP suppressed the expression of occludin (OCLN) and affected tight junctions (TJ) between urothelial cells to promote THP absorption.

The complex hydrogel based on diatom biosilica and hydroxybutyl chitosan for wound healing

In this study, doxycycline (DOXY)-loaded diatom biosilica (DBs) were developed and coated with hydroxybutyl chitosan (HBC) hydrogel for wound healing. The HBC/DBs/DOXY composite hydrogel had significant inhibitory activity against S. aureus (100%) and E. coli (98%). In addition, the HBC/DBs/DOXY hydrogel showed minimum cytotoxicity on L929 cells in vitro, indicating the great biocompatibility of the composite hydrogel. The in vivo results demonstrated that HBC/DBs/DOXY composite hydrogel could promote the wound re-epithelialization and accelerate the healing. The wound closure was evaluated to be 99.4 ± 0.4% at day 12 after treated with the hydrogel, with the presence of neovascularization and collagen deposition, all indicating the great potential of HBC/DBs/DOXY hydrogel in wound healing.

Injectable Hydrogel Containing Cowpea Mosaic Virus Nanoparticles Prevents Colon Cancer Growth

Despite advances in laparoscopic surgery combined with neoadjuvant and adjuvant therapy, colon cancer management remains challenging in oncology. Recurrence of cancerous tissue locally or in distant organs (metastasis) is the major problem in colon cancer management. Vaccines and immunotherapies hold promise in preventing cancer recurrence through stimulation of the immune system. We and others have shown that nanoparticles from plant viruses, such as cowpea mosaic virus (CPMV) nanoparticles, are potent immune adjuvants for cancer vaccines and serve as immunostimulatory agents in the treatment or prevention of tumors. While being noninfectious toward mammals, CPMV activates the innate immune system through recognition by pattern recognition receptors (PRRs). While the particulate structure of CPMV is essential for prominent immune activation, the proteinaceous architecture makes CPMV subject to degradation in vivo; thus, CPMV immunotherapy requires repeated injections for optimal outcome. Frequent intraperitoneal (IP) injections however are not optimal from a clinical point of view and can worsen the patient's quality of life due to the hospitalization required for IP administration. To overcome the need for repeated IP injections, we loaded CPMV nanoparticles in injectable chitosan/glycerophosphate (GP) hydrogel formulations, characterized their slow-release potential, and assessed the antitumor preventative efficacy of CPMV-in-hydrogel single dose versus soluble CPMV (single and prime-boost administration). Using fluorescently labeled CPMV-in-hydrogel formulations, in vivo release data indicated that single IP injection of the hydrogel formulation yielded a gel depot that supplied intact CPMV over the study period of 3 weeks, while soluble CPMV lasted only for one week. IP administration of the CPMV-in-hydrogel formulation boosted with soluble CPMV for combined immediate and sustained immune activation significantly inhibited colon cancer growth after CT26 IP challenge in BALB/c mice. The observed antitumor efficacy suggests that CPMV can be formulated in a chitosan/GP hydrogel to achieve prolonged immunostimulatory effects as single-dose immunotherapy against colon cancer recurrence. The present findings illustrate the potential of injectable hydrogel technology to accommodate plant virus nanoparticles to boost the translational development of effective antitumor immunotherapies.

Injectable Slow-Release Hydrogel Formulation of a Plant Virus-Based COVID-19 Vaccine Candidate

Cowpea mosaic virus (CPMV) is a potent immunogenic adjuvant and epitope display platform for the development of vaccines against cancers and infectious diseases, including coronavirus disease 2019. However, the proteinaceous CPMV nanoparticles are rapidly degraded in vivo. Multiple doses are therefore required to ensure long-lasting immunity, which is not ideal for global mass vaccination campaigns. Therefore, we formulated CPMV nanoparticles in injectable hydrogels to achieve slow particle release and prolonged immunostimulation. Liquid formulations were prepared from chitosan and glycerophosphate (GP) before homogenization with CPMV particles at room temperature. The formulations containing high-molecular-weight chitosan and 0-4.5 mg mL-1 CPMV gelled rapidly at 37 °C (5-8 min) and slowly released cyanine 5-CPMV particles in vitro and in vivo. Importantly, when a hydrogel containing CPMV displaying severe acute respiratory syndrome coronavirus 2 spike protein epitope 826 (amino acid 809-826) was administered to mice as a single subcutaneous injection, it elicited an antibody response that was sustained over 20 weeks, with an associated shift from Th1 to Th2 bias. Antibody titers were improved at later time points (weeks 16 and 20) comparing the hydrogel versus soluble vaccine candidates; furthermore, the soluble vaccine candidates retained Th1 bias. We conclude that CPMV nanoparticles can be formulated effectively in chitosan/GP hydrogels and are released as intact particles for several months with conserved immunotherapeutic efficacy. The injectable hydrogel containing epitope-labeled CPMV offers a promising single-dose vaccine platform for the prevention of future pandemics as well as a strategy to develop long-lasting plant virus-based nanomedicines.

Polymeric Nanoparticles-Loaded Hydrogels for Biomedical Applications: A Systematic Review on In Vivo Findings

Clinically available medications face several hurdles that limit their therapeutic activity, including restricted access to the target tissues due to biological barriers, low bioavailability, and poor pharmacokinetic properties. Drug delivery systems (DDS), such as nanoparticles (NPs) and hydrogels, have been widely employed to address these issues. Furthermore, the DDS improves drugs’ therapeutic efficacy while reducing undesired side effects caused by the unspecific distribution over the different tissues. The integration of NPs into hydrogels has emerged to improve their performance when compared with each DDS individually. The combination of both DDS enhances the ability to deliver drugs in a localized and targeted manner, paired with a controlled and sustained drug release, resulting in increased drug therapeutic effectiveness. With the incorporation of the NPs into hydrogels, it is possible to apply the DDS locally and then provide a sustained release of the NPs in the site of action, allowing the drug uptake in the required location. Additionally, most of the materials used to produce the hydrogels and NPs present low toxicity. This article provides a systematic review of the polymeric NPs-loaded hydrogels developed for various biomedical applications, focusing on studies that present in vivo data.

Chitosan hydrogels incorporating colloids for sustained drug delivery

In today's biomedical research, a huge effort is being made towards the development of efficient drug delivery systems, achieving sustainable and controlled delivery of drugs. Chitosan (CS) hydrogels are high water content materials with very relevant biological properties to that purpose. Their use for a local and delayed delivery has already been demonstrated for a wide variety of therapeutic agents. One relatively recent strategy to improve these CS-based systems consists in the insertion of colloids, embedding drugs, within their three-dimensional matrix. This provides a second barrier to the diffusion of drugs through the system, and allows to better control their release. The main objective of this review is to report the many existing complex systems composed of CS hydrogels embedding different types of colloids used as drug delivery devices to delay the release of drugs. The various biomedical applications of such final systems are also detailed in this review.

Synergistic and receptor-mediated targeting of arthritic joints via intra-articular injectable smart hydrogels containing leflunomide-loaded lipid nanocarriers

Intra-articular drug delivery represents a tempting strategy for local treatment of rheumatoid arthritis. Targeting drugs to inflamed joints bypasses systemic-related side effects. Albeit, rapid drug clearance and short joint residence limit intra-articular administration. Herein, injectable smart hydrogels comprising free/nanoencapsulated leflunomide (LEF) were developed. Nanostructured lipid carriers (NLCs), 200-300 nm, were coated with either chondroitin sulfate (CHS), hyaluronic acid (HA), or chitosan (CS) to provide joint targetability. Coated NLCs were incorporated in either hyaluronic/pluronic (HP) or chitosan/β-glycerophosphate (CS/βGP) hydrogels. Optimized systems ensured convenient gelation time (14-100 s), injectability (5-15 s), formulation-dependent mechanical strength, and extended LEF release up to 51 days. In vivo intra-articular injection in induced arthritis rat model revealed that rats treated with HA-coated NLCs showed the fastest recovery. Histopathological examination demonstrated perfect joint healing in case of HA-coated LEF-NLCs in CS/βGP thermogel manifested as minor erosion of subchondral bone, improved intensity of extracellular matrix, cartilage thickness, and chondrocyte number. Both HA- and CHS-coated NLCs reduced TNF-α level 4-5-fold relative to positive control. The feat would be achieved via active targeting to CD44 receptors overexpressed in the articular tissue, limiting chondrocyte apoptosis together with innate synergistic targetability by promoting chondrocyte proliferation and neovascularization, inhibiting the production of pro-inflammatory cytokines, thus enhancing cartilaginous tissue repair.

Hydrogels: 3D Drug Delivery Systems for Nanoparticles and Extracellular Vesicles

Synthetic and naturally occurring nano-sized particles present versatile vehicles for the delivery of therapy in a range of clinical settings. Their small size and modifiable physicochemical properties support refinement of targeting capabilities, immune response, and therapeutic cargo, but rapid clearance from the body and limited efficacy remain a major challenge. This highlights the need for a local sustained delivery system for nanoparticles (NPs) and extracellular vesicles (EVs) at the target site that will ensure prolonged exposure, maximum efficacy and dose, and minimal toxicity. Biocompatible hydrogels loaded with therapeutic NPs/EVs hold immense promise as cell-free sustained and targeted delivery systems in a range of disease settings. These bioscaffolds ensure retention of the nano-sized particles at the target site and can also act as controlled release systems for therapeutics over a prolonged period of time. The encapsulation of stimuli sensitive components into hydrogels supports the release of the content on-demand. In this review, we highlight the prospect of the sustained and prolonged delivery of these nano-sized therapeutic entities from hydrogels for broad applications spanning tissue regeneration and cancer treatment. Further understanding of the parameters controlling the release rate of these particles and efficient transfer of cargo to target cells will be fundamental to success.

The Synthesis, Characterization and Applications of Polyhydroxyalkanoates (PHAs) and PHA-Based Nanoparticles

Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.

Recent Progress on Polysaccharide-Based Hydrogels for Controlled Delivery of Therapeutic Biomolecules

A plethora of applications using polysaccharides have been developed in recent years due to their availability as well as their frequent nontoxicity and biodegradability. These polymers are usually obtained from renewable sources or are byproducts of industrial processes, thus, their use is collaborative in waste management and shows promise for an enhanced sustainable circular economy. Regarding the development of novel delivery systems for biotherapeutics, the potential of polysaccharides is attractive for the previously mentioned properties and also for the possibility of chemical modification of their structures, their ability to form matrixes of diverse architectures and mechanical properties, as well as for their ability to maintain bioactivity following incorporation of the biomolecules into the matrix. Biotherapeutics, such as proteins, growth factors, gene vectors, enzymes, hormones, DNA/RNA, and antibodies are currently in use as major therapeutics in a wide range of pathologies. In the present review, we summarize recent progress in the development of polysaccharide-based hydrogels of diverse nature, alone or in combination with other polymers or drug delivery systems, which have been implemented in the delivery of biotherapeutics in the pharmaceutical and biomedical fields.

Hydrogel Composites with Different Dimensional Nanoparticles for Bone Regeneration

The treatment of large segmental bone defects and complex types of fractures caused by trauma, inflammation, or tumor resection is still a challenge in the field of orthopedics. Various natural or synthetic biological materials used in clinical applications cannot fully replicate the structure and performance of raw bone. This highlights how to endow materials with multiple functions and biological properties, which is a problem that needs to be solved in practical applications. Hydrogels with outstanding biocompatibility, for their casting into any shape, size, or form, are suitable for different forms of bone defects. Therefore, they have been used in regenerative medicine more widely. In this review, versatile hydrogels are compounded with nanoparticles of different dimensions, and many desirable features of these materials in bone regeneration are introduced, including drug delivery, cell factor vehicle, cell scaffolds, which have potential in bone regeneration applications. The combination of hydrogels and nanoparticles of different dimensions encourages better filling of bone defect areas and has higher adaptability. This is due to the minimally invasive properties of the material and ability to match irregular defects. These biological characteristics make composite hydrogels with different dimensional nanoparticles become one of the most attractive options for bone regeneration materials.

Established and Emerging Producers of PHA: Redefining the Possibility

The polyhydroxyalkanoate was discovered almost around a century ago. Still, all the efforts to replace the traditional non-biodegradable plastic with much more environmentally friendly alternative are not enough. While the petroleum-based plastic is like a parasite, taking over the planet rapidly and without any feasible cure, its perennial presence has made the ocean a floating island of life-threatening debris and has flooded the landfills with toxic towering mountains. It demands for an immediate solution; most resembling answer would be the polyhydroxyalkanoates. The production cost is yet one of the significant challenges that various corporate is facing to replace the petroleum-based plastic. To deal with the economic constrain better strain, better practices, and a better market can be adopted for superior results. It demands for systems for polyhydroxyalkanoate production namely bacteria, yeast, microalgae, and transgenic plants. Solely strains affect more than 40% of overall production cost, playing a significant role in both upstream and downstream processes. The highly modifiable nature of the biopolymer provides the opportunity to replace the petroleum plastic in almost all sectors from food packaging to medical industry. The review will highlight the recent advancements and techno-economic analysis of current commercial models of polyhydroxyalkanoate production. Bio-compatibility and the biodegradability perks to be utilized highly efficient in the medical applications gives ample reason to tilt the scale in the favor of the polyhydroxyalkanoate as the new conventional and sustainable plastic.

In Situ Forming iEDDA Hydrogels with Tunable Gelation Time Release High-Molecular Weight Proteins in a Controlled Manner over an Extended Time

Off-target interactions between reactive hydrogel moieties and drug cargo as well as slow reaction kinetics and the absence of controlled protein release over an extended period of time are major drawbacks of chemically cross-linked hydrogels for biomedical applications. In this study, the inverse electron demand Diels-Alder (iEDDA) reaction between norbornene- and tetrazine-functionalized eight-armed poly(ethylene glycol) (PEG) macromonomers was used to overcome these obstacles. Oscillatory shear experiments revealed that the gel point of a 15% (w/v) eight-armed PEG hydrogel with a molecular weight of 10 kDa was less than 15 s, suggesting the potential for fast in situ gelation. However, the high-speed reaction kinetics result in a risk of premature gel formation that complicates the injection process. Therefore, we investigated the effect of polymer concentration, temperature, and chemical structure on the gelation time. The cross-linking reaction was further characterized regarding bioorthogonality. Only 11% of the model protein lysozyme was found to be PEGylated by the iEDDA reaction, whereas 51% interacted with the classical Diels-Alder reaction. After determination of the mesh size, fluorescein isothiocyanate-dextran was used to examine the release behavior of the hydrogels. When glucose oxidase was embedded into 15% (w/v) hydrogels, a controlled release over more than 250 days was achieved. Overall, the PEG-based hydrogels cross-linked via the fast iEDDA reaction represent a promising material for the long-term administration of biologics.

Regulation of in vivo delivery of nanomedicines by herbal medicines

Nanomedicines are of increasing scrutiny due to their improved efficacy and/or mitigated side effects. They can be integrated with many other therapeutics to further boost the clinical benefits. Among those, herbal medicines are arousing great interest to be combined with nanomedicines to exert synergistic effects in multifaceted mechanisms. The in vivo performance of nanomedicines which determines the therapeutic efficacy and safety is believed to be heavily influenced by the physio-pathological characters of the body. Activation of multiple immune factors, e.g., complement system, phagocytic cells, lymphocytes, and among many others, can affect the fate of nanomedicines in blood circulation, biodistribution, interaction with single cells and intracellular transport. Immunomodulatory effects and metabolic regulation by herbal medicines have been widely witnessed during the past decades, which alter the physio-pathological conditions and dramatically affect in vivo delivery of nanomedicines. In this review, we summarize recent progress of understanding on the in vivo delivery process of nanomedicines and analyze the major affecting factors that regulate the interaction of nanomedicines with organisms. We discuss the immunomodulatory roles and metabolic regulation by herbal medicines and their effects on in vivo delivery process of nanomedicines, as well as the prospective clinical benefits from the combination of nanomedicines and herbal medicines.

Intra-Articular Dual Drug Delivery for Synergistic Rheumatoid Arthritis Treatment

Systemic rheumatoid arthritis (RA) regimens fail to attain effective drug level at the affected joints and are associated with serious side effects. Herein, an attempt made to improve therapeutic outcomes of both leflunomide (LEF) which is a disease modifying antirheumatic and dexamethasone (Dex) through local delivery of combination therapy by intra-articular route. LEF and Dex were encapsulated in nanostructured lipid carriers (NLCs) and PLGA nanoparticles (NPs), respectively. Both nanocarriers were loaded into chitosan/β glycerophosphate (CS/βGP) thermo-sensitive hydrogels and injected intra-articularly in adjuvant induced RA rat model. Particle size of LEF NLCs and selected Dex NPs formulations were 200 and 119 nm, respectively. Dex NPs and LEF NLCs showed a sustained release profile for up to 58 and 17 days, respectively. After 14 days of treatment remarkable joint healing was observed for groups treated with Dex NPs in combination with either free LEF or LEF NLCs in CS/βGP hydrogel. Joint diameter measurements, TNF α levels and histopathological examination of dissected joints showed comparable values to the negative control group. This might be attributed to the synergistic effect of drug combination besides the ability of nanocarriers loaded hydrogel to prolong joint residence time and enhance joint healing potential.

Can nanoparticles and nano‒protein interactions bring a bright future for insulin delivery?

Insulin therapy plays an essential role in the treatment of diabetes mellitus. However, frequent injections required to effectively control the glycemic levels lead to substantial inconvenience and low patient compliance. In order to improve insulin delivery, many efforts have been made, such as developing the nanoparticles (NPs)-based release systems and oral insulin. Although some improvements have been achieved, the ultimate results are still unsatisfying and none of insulin-loaded NPs systems have been approved for clinical use so far. Recently, nano‒protein interactions and protein corona formation have drawn much attention due to their negative influence on the in vivo fate of NPs systems. As the other side of a coin, such interactions can also be used for constructing advanced drug delivery systems. Herein, we aim to provide an insight into the advance and flaws of various NPs-based insulin delivery systems. Particularly, an interesting discussion on nano‒protein interactions and its potentials for developing novel insulin delivery systems is initiated.

•

Insulin therapy plays essential roles in treating diabetes.

•

Optimizing insulin delivery enhances insulin therapy.

•

Nanoparticles are promising systems for delivery of insulin.

•

Nano-protein interactions influence the delivery of nanoparticles.

•

Nano-protein interactions can be used for advanced delivery of insulin.

Advances in Subcutaneous Delivery Systems of Biomacromolecular Agents for Diabetes Treatment

Diabetes mellitus is a major threat to human health. Both its incidence and prevalence have been rising steadily over the past few decades. Biomacromolecular agents such as insulin and glucagon-like peptide 1 receptor agonists are commonly used hypoglycemic drugs that play important roles in the treatment of diabetes. However, their traditional frequent administration may cause numerous side effects, such as pain, infection or local tissue necrosis. To address these issues, many novel subcutaneous delivery systems have been developed in recent years. In this review, we survey recent developments in subcutaneous delivery systems of biomacromolecular hypoglycemic drugs, including sustained-release delivery systems and stimuli-responsive delivery systems, and summarize the advantages and limitations of these systems. Future opportunities and challenges are discussed as well.

Synthesis and characterization of an injectable microparticles integrated hydrogel composite biomaterial: In-vivo biocompatibility and inflammatory arthritis treatment

Polymeric hydrogels and microparticles have been widely used for localized drug delivery applications for the treatment of arthritis. Nonetheless, owing to initial burst drug release, non-specific biodistribution and low retention time at the target site in body, these polymeric drug delivery systems have been found with low in-vivo performance. Hence, the above limitations need to be resolved by designing a smart novel drug delivery system which is the current need in biomedicine. Herein, a novel localized injectable thermoresponsive microparticles embedded hydrogel composite drug delivery system has been developed for the treatment of inflammatory arthritis. In the current study, methotrexate (MTX) loaded alginate microparticles (MTX-Microparticles) are embedded into thermoreversible hydrogel matrix (MTX-MPs-H) prepared by physical blending of sodium hyaluronate and methylcellulose (SHMC). Microparticles-hydrogel composite system exhibited appropriate in-vitro thermoreversibility (sol at 4 °C and gel at 37 °C), biocompatibility (>80 %), hemocompatibility, and controlled drug release profile. The in-vivo biocompatibility studies for 10 days revealed that composite system is non-toxic in nature. The developed MTX-MPs-H composite drug delivery system effectively decreased the swelling/ inflammation of the arthritis affected paw in wistar rats in comparison to only alginate microparticles and pure MTX up to 30 days.

In vivo and Post-synthesis Strategies to Enhance the Properties of PHB-Based Materials: A Review

The transition toward "green" alternatives to petroleum-based plastics is driven by the need for "drop-in" replacement materials able to combine characteristics of existing plastics with biodegradability and renewability features. Promising alternatives are the polyhydroxyalkanoates (PHAs), microbial biodegradable polyesters produced by a wide range of microorganisms as carbon, energy, and redox storage material, displaying properties very close to fossil-fuel-derived polyolefins. Among PHAs, polyhydroxybutyrate (PHB) is by far the most well-studied polymer. PHB is a thermoplastic polyester, with very narrow processability window, due to very low resistance to thermal degradation. Since the melting temperature of PHB is around 170-180°C, the processing temperature should be at least 180-190°C. The thermal degradation of PHB at these temperatures proceeds very quickly, causing a rapid decrease in its molecular weight. Moreover, due to its high crystallinity, PHB is stiff and brittle resulting in very poor mechanical properties with low extension at break, which limits its range of application. A further limit to the effective exploitation of these polymers is related to their production costs, which is mostly affected by the costs of the starting feedstocks. Since the first identification of PHB, researchers have faced these issues, and several strategies to improve the processability and reduce brittleness of this polymer have been developed. These approaches range from the in vivo synthesis of PHA copolymers, to the enhancement of post-synthesis PHB-based material performances, thus the addition of additives and plasticizers, acting on the crystallization process as well as on polymer glass transition temperature. In addition, reactive polymer blending with other bio-based polymers represents a versatile approach to modulate polymer properties while preserving its biodegradability. This review examines the state of the art of PHA processing, shedding light on the green and cost-effective tailored strategies aimed at modulating and optimizing polymer performances. Pioneering examples in this field will be examined, and prospects and challenges for their exploitation will be presented. Furthermore, since the establishment of a PHA-based industry passes through the designing of cost-competitive production processes, this review will inspect reported examples assessing this economic aspect, examining the most recent progresses toward process sustainability.

The Brief Analysis of Peptide-combined Nanoparticle: Nanomedicine's Unique Value

Therapeutic peptides (TPs) are biological macromolecules which can act as neurotransmitters, hormones, ion channel ligands and growth factors. Undoubtedly, TPs are crucial in modern medicine. But low bio-stability and some special adverse reactions reduce their places to the application. With the development of nanotechnology, nanoparticles (NPs) in pharmaceutical science gained much attention. They can encapsulate the TPs into their membrane or shell. Therefore, they can protect the TPs against degradation and then increase the bioavailability, which was thought to be the biggest advantage of them. Additionally, targeting was also studied to improve the effect of TPs. However, there were some drawbacks of nano TPs like low loading efficiency and difficulty to manufacture. Nowadays, lots of studies focused on improving effect of TPs by preparing nanoparticles. In this review, we presented a brief analysis of peptide-combined nanoparticles. Their advantages and disadvantages were listed in terms of mechanism. And several examples of applications were summarized.

Well-dispersed platelet lysate entrapped nanoparticles incorporate with injectable PDLLA-PEG-PDLLA triblock for preferable cartilage engineering application

Platelet lysate (PL) as a cost-effective cocktail of growth factors is an emerging ingredient in regenerative medicine, especially in cartilage tissue engineering. However, most studies fail to pay attention to PL's intrinsic characteristics and incorporate it directly with scaffolds or hydrogels by simple mixture. Currently, the particle size distribution of PL was determined to be scattered. Directly introducing PL into a thermosensitive poly(d,l-lactide)-poly(ethylene glycol)-poly(d,l-lactide) (PLEL) hydrogel disturbed its sol-gel transition. Electrostatic self-assembly heparin (Hep) and ε-poly-l-lysine (EPL) nanoparticles (NPs) were fabricated to improve the dispersity of PL. Such PL-NPs-incorporated PLEL gels retained the initial gelling capacity and showed a long-term PL-releasing ability. Moreover, the PL-loaded composite hydrogels inhibited the inflammatory response and dedifferentiation of IL-1β-induced chondrocytes. For in vivo applications, the PLEL@PL-NPs system ameliorated the early cartilage degeneration and promoted cartilage repair in the late stage of osteoarthritis. RNA sequencing analysis indicated that PL's protective effects might be associated with modulating hyaluronan synthase 1 (HAS-1) expression. Taken together, these results suggest that well-dispersed PL by Hep/EPL NPs is a preferable approach for its incorporation into hydrogels and the constructed PLEL@PL-NPs system is a promising cell-free and stepwise treatment option for cartilage tissue engineering.

Molecular Dynamics Studies of Poly(Lactic Acid) Nanoparticles and Their Interactions with Vitamin E and TLR Agonists Pam1CSK4 and Pam3CSK4

Poly(lactic acid) (PLA) nanoparticles (NPs) are widely investigated due to their bioresorbable, biocompatible and low immunogen properties. Interestingly, many recent studies show that they can be efficiently used as drug delivery systems or as adjuvants to enhance vaccine efficacy. Our work focuses on the molecular mechanisms involved during the nanoprecipitation of PLA NPs from concentrated solutions of lactic acid polymeric chains, and their specific interactions with biologically relevant molecules. In this study, we evaluated the ability of a PLA-based nanoparticle drug carrier to vectorize either vitamin E or the Toll-like receptor (TLR) agonists Pam₁CSK₄ and Pam₃CSK₄, which are potent activators of the proinflammatory transcription factor NF-κB. We used dissipative particle dynamics (DPD) to simulate large systems mimicking the nanoprecipitation process for a complete NP. Our results evidenced that after the NP formation, Pam₁CSK₄ and Pam₃CSK₄ molecules end up located on the surface of the particle, interacting with the PLA chains via their fatty acid chains, whereas vitamin E molecules are buried deeper in the core of the particle. Our results allow for a better understanding of the molecular mechanisms responsible for the formation of the PLA NPs and their interactions with biological molecules located either on their surfaces or encapsulated within them. This work should allow for a rapid development of better biodegradable and safe vectorization systems with new drugs in the near future.

A basal-bolus insulin regimen integrated microneedle patch for intraday postprandial glucose control

Multiple daily insulin injections have been a common regimen worldwide for the management of diabetes mellitus but involved potential safety and compliance problems. In this context, a single integrated microneedle patch (IMP) with multiple release kinetics is demonstrated to provide better physiologic insulin coverage for postprandial glycemic excursion in a convenient and pain-free manner. The combination of rapid separating technique and multiple individual microneedle arrays provides the combined ability to efficiently deliver insulin into the skin within seconds and to independently control insulin release kinetics. In addition, the diabetic rats with a traditional breakfast-lunch-dinner lifestyle exhibit obvious intraday glucose fluctuations, while the hypoglycemic experiments indicate that the IMP is capable of simultaneous bolus and sustained insulin delivery to closely match the glucose rise that occurs in response to meals and efficiently minimize excessive fluctuations, suggesting the potential of this new transdermal insulin delivery system as substitutes for multiple daily injections.

An easy long-acting BMP7 release system based on biopolymer nanoparticles for inducing osteogenic differentiation of adipose mesenchymal stem cells

In contrast to the early acting bone morphogenetic protein 2, bone morphogenetic protein 7 (BMP7) plays a decisive role mainly in the late stages of bone formation. To overcome deactivation and degradation of expensive BMP7, we designed a novel long-acting BMP7 release system based on poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) nanoparticles to enable the induction of osteogenic differentiation in human adipose mesenchymal stem cells (ADSCs). In order to improve the encapsulation efficiency of BMP7 and avoid damage by organic solvents, BMP7 was modified and protected using the biosurfactant soybean lecithin. In an in vitro test, BMP7-soybean lecithin-P34HB nanoparticles (BMP7-SPNPs) showed a short initial burst of BMP7 release during the first 24h, followed by a steady increase to a cumulative 80% release in 20days. Compared with the rapid release of control P34HB nanoparticles without soybean phospholipids loaded with BMP7 without soybean lecithin, BMP7-SPNPs significantly reduced the initial burst of BMP7 release and stabilized the content of BMP7 to allow long-term osteogenic differentiation during the late phase of bone development. Human ADSCs treated with BMP7-SPNPs showed higher alkaline phosphatase activity and higher expression levels of genetic markers of osteogenic differentiation compared with the control group. Thus, the results indicate that BMP7-SPNPs can be used as a rapid and long-acting BMP7 delivery system for osteogenic differentiation.

Nanotechnology as a Platform for the Development of Injectable Parenteral Formulations: A Comprehensive Review of the Know-Hows and State of the Art

Within recent decades, the development of nanotechnology has made a significant contribution to the progress of various fields of study, including the domains of medical and pharmaceutical sciences. A substantially transformed arena within the context of the latter is the development and production of various injectable parenteral formulations. Indeed, recent decades have witnessed a rapid growth of the marketed and pipeline nanotechnology-based injectable products, which is a testimony to the remarkability of the aforementioned contribution. Adjunct to the ability of nanomaterials to deliver the incorporated payloads to many different targets of interest, nanotechnology has substantially assisted to the development of many further facets of the art. Such contributions include the enhancement of the drug solubility, development of long-acting locally and systemically injectable formulations, tuning the onset of the drug’s release through the endowment of sensitivity to various internal or external stimuli, as well as adjuvancy and immune activation, which is a desirable component for injectable vaccines and immunotherapeutic formulations. The current work seeks to provide a comprehensive review of all the abovementioned contributions, along with the most recent advances made within each domain. Furthermore, recent developments within the domains of passive and active targeting will be briefly debated.

Drug-free and non-crosslinked chitosan scaffolds with efficient antibacterial activity against both Gram-negative and Gram-positive bacteria

Treatment of oral pathogens is important for both oral and systemic health. The antimicrobial activity of chitosan (CS)-based scaffolds either loading antibiotics or compositing with other agents are well documented. However, the intrinsic antibacterial activity of CS scaffolds alone has never been reported. Herein, we fabricated the non-crosslinked CS scaffold and investigated its antibacterial activity against typical oral pathogens, Gram-negative Porphyromonas gingivalis and Gram-positive Streptococcus mutans. We found both pathogens were completely killed by 1 mg CS scaffolds at 6 h, due largely to the CS-induced time-dependent bacteria clustering. Interestingly, β-glycerophosphate crosslinked scaffolds showed no antibacterial activity. In conclusion, the bactericidal activity of CS scaffolds alone is reported for the first time. Together with the biodegradability, physical stability, biocompatibility and great antibacterial activity, the non-crosslinked CS scaffolds may have great potentials not only in treating oral diseases but also in wound healing and tissue engineering.

Nanotechnology in Insulin Delivery for Management of Diabetes

Diabetes is a group of diseases characterized by hyperglycemia and originating from the deficiency or resistance to insulin, or both. Ultimately, the most effective treatment for patients with diabetes involves subcutaneous injections of insulin. However, this route of administration is often painful and inconvenient, as most patients will have to selfadminister it at least twice a day for the rest of their lives. Also, infection, insulin precipitation, and either lipoatrophy or lipohypertrophy are frequently observed at the site of injection. To date, several alternative routes of insulin administration have been explored, including nasal, pulmonary and oral. Although the delivery of insulin is an ideal route for diabetic patients, several limitations have to be overcome such as the rapid degradation of insulin in gastric fluid and low oral bioavailability. Numerous strategies have been carried out to improve these limited parameters such as the use of enzyme inhibitors, absorption enhancers, mucoadhesive polymers and chemical modification for receptor-mediated absorption. Also, insulin-loaded nanocarriers bypass several physiological barriers. This current review focuses on the various barriers existing in the delivery of insulin through the oral route and the strategies undertaken so far to overcome those obstacles using nanocarriers as a potential vehicle of insulin.

Tunable Two-Compartment On-Demand Sustained Drug Release Based on Lipid Gels

The binary-lipid system of soybean phosphatidylcholine (SPC) and glycerol dioleate (GDO) can hydrate to gels on contacting with aqueous mediums, which has emerged as a versatile and promising delivery matrix for extended drug release applications. In the present work, we have characterized the gelation process of this SPC/GDO lyotropic gel (SGLG) system by rheology and evaluated the drug release profiles from the SGLG formulations with different SPC/GDO mass ratios. Our study has demonstrated that simply adjusting the SPC/GDO mass ratio can tune the lipid gelation behavior and modulate the drug release profiles. More importantly, the drug release from the SGLG formulations follows a two-compartment (fast and slow release compartments) release kinetics that has not been reported before. We posit that the fast release compartment corresponds to the passive diffusion of the drug during the early stage of the gel formation. After the boundary gel phase generation, the drug release is then dominated by the slow diffusion process from SGLG. The pharmacokinetic studies in rats match well with the in vitro studies, suggesting that the binary-lipid formulation is an excellent candidate for on-demand sustained drug delivery system.