Odontogenic differentiation and dentin formation of dental pulp cells under nanobioactive glass induction

Multifunctional bioactive glass nanoparticles: surface-interface decoration and biomedical applications

Developing bioactive materials with multifunctional properties is crucial for enhancing their biomedical applications in regenerative medicine. Bioactive glass nanoparticle (BGN) is a new generation of biomaterials that demonstrate high biocompatibility and tissue-inducing capacity. However, the hard nanoparticle surface and single surface property limited their wide biomedical applications. In recent years, the surface functional strategy has been employed to decorate the BGN and improve its biomedical applications in bone tissue repair, bioimaging, tumor therapy and wound repair. This review summarizes the progress of surface-interface design strategy, customized multifunctional properties and biomedical applications in detail. We also discussed the current challenges and further development of multifunctional BGN to meet the requirements of various biomedical applications.

Sensory nerves drive migration of dental pulp stem cells via the CGRP-Ramp1 axis in pulp repair

Dental pulp stem cells (DPSCs) are responsible for maintaining pulp structure and function after pulp injury. DPSCs migrate directionally to the injury site before differentiating into odontoblast-like cells, which is a prerequisite and a determinant in pulp repair. Increasing evidence suggests that sensory neuron-stem cell crosstalk is critical for maintaining normal physiological functions, and sensory nerves influence stem cells mainly by neuropeptides. However, the role of sensory nerves on DPSC behaviors after pulp injury is largely unexplored. Here, we find that sensory nerves released significant amounts of calcitonin gene-related peptide (CGRP) near the injury site, acting directly on DPSCs via receptor activity modifying protein 1 (RAMP1) to promote collective migration of DPSCs to the injury site, and ultimately promoting pulp repair. Specifically, sensory denervation leads to poor pulp repair and ectopic mineralization, in parallel with that DPSCs failed to be recruited to the injury site. Furthermore, in vitro evidence shows that sensory nerve-deficient microenvironment suppressed DPSC migration prominently among all related behaviors. Mechanistically, the CGRP-Ramp1 axis between sensory neurons and DPSCs was screened by single-cell RNA-seq analysis and immunohistochemical studies confirmed that the expression of CGRP rather than Ramp1 increases substantially near the damaged site. We further demonstrated that CGRP released by sensory nerves binds the receptor Ramp1 on DPSCs to facilitate cell collective migration by an indirect co-culture system using conditioned medium from trigeminal neurons, CGRP recombinant protein and antagonists BIBN4096. The treatment with exogenous CGRP promoted the recruitment of DPSCs, and ultimately enhanced the quality of pulp repair. Targeting the sensory nerve could therefore provide a new strategy for stem cell-based pulp repair and regeneration.

Heparin-Functionalized Bioactive Glass to Harvest Endogenous Growth Factors for Pulp Regeneration

Pulp and periapical diseases can lead to the cessation of tooth development, resulting in compromised tooth structure and functions. Despite numerous efforts to induce pulp regeneration, effective strategies are still lacking. Growth factors (GFs) hold considerable promise in pulp regeneration due to their diverse cellular regulatory properties. However, the limited half-lives and susceptibility to degradation of exogenous GFs necessitate the administration of supra-physiological doses, leading to undesirable side effects. In this research, a heparin-functionalized bioactive glass (CaO-P2O5-SiO2-Heparin, abbreviated as PSC-Heparin) with strong bioactivity and a stable neutral pH is developed as a promising candidate to addressing challenges in pulp regeneration. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis reveal the successful synthesis of PSC-Heparin. Scanning electron microscopy and X-ray diffraction show the hydroxyapatite formation can be observed on the surface of PSC-Heparin after soaking in simulated body fluid for 12 h. PSC-Heparin is capable of harvesting various endogenous GFs and sustainably releasing them over an extended duration by the enzyme-linked immunosorbent assay. Cytological experiments show that developed PSC-Heparin can facilitate the adhesion, migration, proliferation, and odontogenic differentiation of stem cells from apical papillae. Notably, the histological analysis of subcutaneous implantation in nude mice demonstrates PSC-Heparin is capable of promoting the odontoblast-like layers and pulp-dentin complex formation without the addition of exogenous GFs, which is vital for clinical applications. This work highlights an effective strategy of harvesting endogenous GFs and avoiding the involvement of exogenous GFs to achieve pulp-dentin complex regeneration, which may open a new horizon for regenerative endodontic therapy.

Osteogenic differentiation and proliferation of apical papilla stem cells using nanoparticles of Neo MTA and bioactive glass

Objective

The aim of this study was to evaluate the osteogenic differentiation ability and proliferation of apical papilla stem cells using nanoparticles of Neo MTA and bioactive glass.

Methods

Neo MTA and bioactive glass 45S5 nanoparticles were prepared and characterized using a transmission electron microscope and X-ray diffraction. Apical papilla stem cells were harvested from freshly-extracted fully-impacted wisdom teeth, cultured, and characterized using flow cytometric analysis. Tested nanomaterials were mixed and samples were classified into four equal groups as follows; Negative control group: SCAP with Dulbecco's modified eagle's medium, Positive control group: SCAP with inductive media, First experimental group: Neo MTA nanoparticles with SCAP, Second experimental group: Bioactive glass nanoparticles with SCAP. Osteoblastic differentiation was assessed using an alkaline phosphatase assay and RANKL expression using specific polyclonal antibodies by fluorescence microscope. The proliferation of SCAP was assessed using cell count and viability of Trypan Blue in addition to an MTT assay.

Results

Isolated SCAP showed a non-hematopoietic origin. Neo MTA showed the highest ALP concentration followed by bioactive glass nanoparticles, and negative control. Bioactive glass nanoparticles showed the highest H score for RANKL protein expression followed by Neo MTA, and negative control. Bioactive glass nanoparticles showed the highest viable cell count.

Conclusions

SCAP isolation is achievable from extracted fully impacted immature third molars. Both tested nanobiomaterials have the ability to induce osteogenic differentiation and proliferation of SCAP.

Effect of Bioactive Glasses and Basic Fibroblast Growth Factor on Dental Pulp Cells

Ideal regeneration of hard tissue and dental pulp has been reported with the use of a combination of bioactive glass and basic fibroblast growth factor (bFGF). However, no previous study has investigated the molecular mechanisms underlying the processes induced by this combination in dental pulp cells. This study aimed to examine the cellular phenotype and transcriptional changes induced by the combination of bioactive glass solution (BG) and bFGF in dental pulp cells using phase-contrast microscopy, a cell counting kit-8 assay, alkaline phosphatase staining, and RNA sequence analysis. bFGF induced elongation of the cell process and increased the number of cells. Whereas BG did not increase ALP activity, it induced extracellular matrix-related genes in the dental pulp. In addition, the combination of BG and bFGF induces gliogenesis-related genes in the nervous system. This is to say, bFGF increased the viability of dental pulp cells, bioactive glass induced odontogenesis, and a dual stimulation with bioactive glass and bFGF induced the wound healing of the nerve system in the dental pulp. Taken together, bioactive glass and bFGF may be useful for the regeneration of the dentin-pulp complex.

Influence of Lithium- and Zinc-Containing Bioactive Glasses on Pulpal Regeneration

OBJECTIVE

 To evaluate the potential of modified bioactive glasses containing lithium and zinc as pulp capping materials by investigating the odontogenic differentiation and mineralization response in the tooth culture model.

MATERIALS AND METHODS

 Lithium- and zinc-containing bioactive glasses (45S5.1Li, 45S5.5Li, 45S5.1Zn, 45S5.5Zn, 45S5.1Zn sol-gel, and 45S5.5Zn sol-gel), fibrinogen-thrombin, and biodentine were prepared to assess Axin2 gene expression at 0, 30 minutes, 1 hour, 12 hours, and 1 day and DSPP gene expression at 0, 3, 7, and 14 days in stem cells from human exfoliated deciduous teeth (SHEDs) using qRT-PCR. The experimental bioactive glasses incorporated with fibrinogen-thrombin and biodentine were placed on the pulpal tissue in the tooth culture model. Histology and immunohistochemistry were analyzed at 2 weeks and 4 weeks.

RESULTS

 Axin2 gene expression for all experimental groups was significantly higher than the control at 12 hours. The DSPP gene expression for all experimental groups was significantly higher than the control at 14 days. The presence of mineralization foci was significantly higher at 4 weeks for the modified bioactive glasses 45S5.5Zn, 45S5.1Zn sol-gel, and 45S5.5Zn sol-gel as well as Biodentine compared with the fibrinogen-thrombin control.

CONCLUSION

 Lithium- and zinc-containing bioactive glasses increased Axin2 and DSPP gene expression in SHEDs and can potentially enhance pulp mineralization and regeneration. Zinc-containing bioactive glasses are a promising candidate to be used as pulp capping materials.

Nanomaterials Modulating the Fate of Dental-Derived Mesenchymal Stem Cells Involved in Oral Tissue Reconstruction: A Systematic Review

The critical challenges in repairing oral soft and hard tissue defects are infection control and the recovery of functions. Compared to conventional tissue regeneration methods, nano-bioactive materials have become the optimal materials with excellent physicochemical properties and biocompatibility. Dental-derived mesenchymal stem cells (DMSCs) are a particular type of mesenchymal stromal cells (MSCs) with great potential in tissue regeneration and differentiation. This paper presents a review of the application of various nano-bioactive materials for the induction of differentiation of DMSCs in oral and maxillofacial restorations in recent years, outlining the characteristics of DMSCs, detailing the biological regulatory effects of various nano-materials on stem cells and summarizing the material-induced differentiation of DMSCs into multiple types of tissue-induced regeneration strategies. Nanomaterials are different and complementary to each other. These studies are helpful for the development of new nanoscientific research technology and the clinical transformation of tissue reconstruction technology and provide a theoretical basis for the application of nanomaterial-modified dental implants. We extensively searched for papers related to tissue engineering bioactive constructs based on MSCs and nanomaterials in the databases of PubMed, Medline, and Google Scholar, using keywords such as "mesenchymal stem cells", "nanotechnology", "biomaterials", "dentistry" and "tissue regeneration". From 2013 to 2023, we selected approximately 150 articles that align with our philosophy.

Effect of nanosized bioactive glass addition on some physical properties of biodentine

The aim of this in vitro study was to investigate some physical properties of Biodentine (BD) (Septodont, France) that has been modified by adding nanosized bioactive glass (nBG) particles to it in different ratios. The cement was modified by adding 1% (7 mg) and 2% (14 mg) nBG powder to BD. BD was used as the control group in its commercial form. A total of 240 cement samples (n = 80) were prepared according to the standard measurements for each test. Subsequently, tests to determine compressive strength, microhardness, initial setting time, and solubility of the samples were performed. The obtained data were statistically analyzed using one-way ANOVA and Tukey's HDS tests, and the significance level was found to be 0.05. The compressive strength values of the samples modified with 1% and 2% nBG were higher than those of the unmodified BD; however, no statistically significant difference was found between them [BD + nBG (2 wt%) ⩾ BD+nBG (1 wt%) ⩾ control BD], (p > 0.05). The microhardness values of the samples modified with 1% and 2% nBG were found to be significantly higher than those of the control group [BD + nBG (2 wt%) > BD+nBG (1 wt%) > control BD], p < 0.05. Initial setting times were determined as 14 min for unmodified BD, 13 min for BD + nBG (1 wt%), and 12 min for BD + nBG (2 wt%). The addition of nBG to BD significantly reduced the initial setting time of BD (p < 0.05). A significant decrease was observed in the solubility of the BD modified with nBG samples compared to that of the control group [control BD > BD+nBG (1 wt%) >BD+nBG (2 wt%)], p < 0.05. Within the limitations of this study, it was found that the addition of certain amounts of nBG to BD positively affected some physical properties of the cement. Future in vitro and in vivo studies should be performed to prove the clinical applicability of the cements used in this study.

Dentin regeneration based on tooth tissue engineering: A review

Missing or damaged teeth due to caries, genetic disorders, oral cancer, or infection may contribute to physical and mental impairment that reduces the quality of life. Despite major progress in dental tissue repair and those replacing missing teeth with prostheses, clinical treatments are not yet entirely satisfactory, as they do not regenerate tissues with natural teeth features. Therefore, much of the focus has centered on tissue engineering (TE) based on dental stem/progenitor cells to create bioengineered dental tissues. Many in vitro and in vivo studies have shown the use of cells in regenerating sections of a tooth or a whole tooth. Tooth tissue engineering (TTE), as a promising method for dental tissue regeneration, can form durable biological substitutes for soft and mineralized dental tissues. The cell-based TE approach, which directly seeds cells and bioactive components onto the biodegradable scaffolds, is currently the most potential method. Three essential components of this strategy are cells, scaffolds, and growth factors (GFs). This study investigates dentin regeneration after an injury such as caries using TE and stem/progenitor cell-based strategies. We begin by discussing about the biological structure of a dentin and dentinogenesis. The engineering of teeth requires knowledge of the processes that underlie the growth of an organ or tissue. Then, the three fundamental requirements for dentin regeneration, namely cell sources, GFs, and scaffolds are covered in the current study, which may ultimately lead to new insights in this field.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Odontogenic Differentiation Induced by TGF-β1 Binding Peptide-Modified Bioglass

Emerging evidence suggests that growth factors are crucial in regenerative endodontic therapy. To achieve the desired effects, the systematic administration of supraphysiologic concentrations of exogenous growth factors is commonly performed, but this is usually associated with high costs, technique, and safety issues. Here, we describe a novel biomaterial that can manipulate endogenous growth factors without the need for adding exogenous growth factors. Transforming growth factor β1 binding peptide (TGFp) was grafted onto the surface of a neutral pH phytic acid-derived bioactive glass (PSC) to synthesize modified bioactive glass (PSC-TGFp). Fourier transform infrared spectroscopy and thermogravimetric analysis results demonstrated that the TGFp was successfully grafted to the surface of the PSC. Scanning electron microscopy and x-ray diffraction showed that PSC-TGFp possessed good in vitro bioactivity. After soaking in simulated body fluid for 24 h, hydroxyapatite formed on the surface of PSC-TGFp. Enzyme-linked immunosorbent assay showed that PSC-TGFp could capture endogenous transforming growth factor β1 from dentin matrix-extracted proteins (DMEP) and release it slowly over 21 d. Cytologic experiments revealed that PSC-TGFp after adsorbing DMEP could enhance the adhesion, migration, viability, and odontogenic differentiation of stem cells from apical papilla. The results highlight that PSC-TGFp may be a promising biomaterial to manipulate endogenous growth factors for regenerative endodontic therapy in the future.

Sol-gel bioactive glass containing biomaterials for restorative dentistry: A review

OBJECTIVE

Bioactive glasses (BAGs) have been researched extensively for dentistry due to their favourable biocompatibility and hard tissue bonding ability. However, the specific application of BAGs produced through sol-gel synthesis in restorative dentistry has not been reviewed previously. This review provides a comprehensive account of the principles behind sol-gel derived BAGs and their investigation for dental tissue restoration materials.

METHODS

A search for in vitro and in vivo studies was performed using the databases Web of Science®, Medline®, Scopus® and Google Scholar®. Articles published over the past 20 years were selected and data on the BAG composition and morphology was extracted. Analysis of the effect of specific BAG additives on the properties of experimental dental materials was also performed.

RESULTS

A majority of BAG particles investigated were spheres ranging in size from 5 nm to ~650 µm. Sol-gel BAGs are mainly applied in the treatment of hypersensitive dentine and for pulp-dentine tissue engineering, while a handful have been used in target drug delivery. BAG fillers are promising additives that result in improved biological properties, antibacterial effects, hardness, acid buffering and remineralization. Unfortunately, some detrimental effects on optical properties have been observed with BAG addition. Additionally, in vivo data, investigations into radiopacity and standardization of test protocols are identified as areas for improvement and further studies.

SIGNIFICANCE

Future work should consider the pertinent issues raised in order to improve the quality of available data and expand knowledge in this area of dental biomaterials research and development.

Effect of mesoporous bioactive glass on odontogenic differentiation of human dental pulp stem cells

Healthy pulp tissue plays an important role in normal function and long-term retention of teeth. Mesoporous bioactive glass (MBG) as a kind of regenerative biomaterials shows the potential in preserving the vital pulp. In this study, MBG prepared by organic template method combined with sol-gel method were used in human dental pulp cell culture and ectopic mineralization experiment. Real-Time PCR was used to explore its ability to induce odontogenic differentiation of dental pulp cells. MBG and rat crowns were implanted under the skin of nude mice for 4 weeks to observe the formation of pulp dentin complex. We found that MBG can release Si and Ca ions and has a strong mineralization activity in vitro. The co-culture of MBG with human dental pulp cells promoted the expression of DMP-1 (dentin matrix protein-1) and ALP (alkalinephosphatase) without affecting cell proliferation. After 4 weeks of subcutaneous implantation in nude mice, the formation of hard tissue with regular structure under the material could be seen, and the structure was similar to dentin tubules. These results indicate that MBG can induce the differentiation of dental pulp cells and the formation of dental pulp-dentin complex and has the potential to promote the repair and regeneration of dental pulp injuries.

Raman Spectroscopy-Based 3D Analysis of Odontogenic Differentiation of Human Dental Pulp Stem Cell Spheroids

Numerous efforts have been made to establish three-dimensional (3D) cell cultures that mimic the structure, cell composition, and functions of actual tissues and organs in vitro; however, owing to its intrinsic complexity, precise characterization of 3D differentiation remains challenging and often results in high variations in the resulting differentiated spheroids. This study reports a 3D Raman mapping-based analytical method that helps us to identify the crucial factors responsible for inducing variability in differentiated stem cell spheroids. Human dental pulp stem cell spheroids were generated at various cell densities using the hanging drop (HD) and molded parafilm-based (MP) methods and were then further subjected to odontogenic differentiation. Thereafter, the 3D cellular differentiation in these spheroids was analyzed based on three different Raman peaks, namely, 960, 1156/1528, and 2935 cm^-1, which correspond to hydroxyapatite (HA, odontogenic differentiation marker), β-carotene (precursor of HA), and proteins/cellular components (cell reference). By correlating such cell differentiation-related peaks and water/medium peaks (3400 cm^-1), we discovered that the diffusion of the medium containing various nutrients and differentiation factors was crucial in determining the variations in 3D differentiation of stem cell spheroids. Odontogenic differentiation was majorly induced at the outer shell of HD spheroids (up to ∼20 μm), whereas odontogenic differentiation was markedly induced in MP spheroids (up to 40-50 μm). Considering the challenges associated with high variations in spheroid and organoid differentiation, we conclude that the proposed Raman-based 3D analysis plays a pivotal role in stem cell-based regenerative therapy and drug screening.

Nanoparticles of Bioactive Glass Enhance Biodentine Bioactivity on Dental Pulp Stem Cells

This study aimed to investigate the cytotoxicity and bioactivity of a novel nanocomposite containing nanoparticles of bioactive glass (nBGs) on human dental pulp stem cells (hDPSCs). nBGs were synthesized by the sol–gel method. Biodentine (BD) nanocomposites (nBG/BD) were prepared with 2 and 5% wt of nBG content; unmodified BD and glass ionomer cement were used as references. Cell viability and attachment were evaluated after 3, 7 and 14 days. Odontogenic differentiation was assessed with alkaline phosphatase (ALP) activity after 7 and 14 days of exposure. Cells successfully adhered and proliferated on nBG/BD nanocomposites, cell viability of nanocomposites was comparable with unmodified BD and higher than GIC. nBG/BD nanocomposites were, particularly, more active to promote odontogenic differentiation, expressed as higher ALP activity of hDPSCs after 7 days of exposure, than neat BD or GIC. This novel nanocomposite biomaterial, nBG/BD, allowed hDPSC attachment and proliferation and increased the expression of ALP, upregulated in mineral-producing cells. These findings open opportunities to use nBG/BD in vital pulp therapies.

Investigation of in vitro odonto/osteogenic capacity of cannabidiol on human dental pulp cell

INTRODUCTION

Vital pulp treatment (VPT) maintains tooth vitality with certain dental materials by protecting pulp from noxious stimulation and promoting repair through enhancing cell proliferation/differentiation, migration, and inducing odontogenesis. As a non-psychotropic cannabis constituent, cannabidiol (CBD) possesses the properties of analgesic, anti-inflammation, and osteogenesis. Therefore, we hypothesize that CBD may induce the odonto/osteogenesis of human dental pulp cells (HDPCs), a critical feature using as effective pulp capping agent for VPT.

MATERIALS AND METHODS

In this in vitro study, the cytotoxicity of CBD on HDPCs was determined by MTT assay. Scratch assay was performed to analyze HDPC migration. The biomineralization was examined by collagen synthesis and calcium nodule formation and related odonto/osteogenic and angiogenic genes. Cannabinoid receptor (CB) specificity was evaluated by Western blotting and Von Kossa staining using specific antagonists AM251 for cannabinoid receptor 1 (CB1) and AM 630 targeted at cannabinoid receptor 2 (CB2). In addition, the underlying molecular mechanism of CBD-induced biomineralization were investigated by examining CB-dependent MAPK signaling pathways.

RESULTS

CBD demonstrated bi-phasic effects on HDPC viability in tested concentrations. We found CBD significantly promoted cell migration, enhanced collagen synthesis and mineralized deposits in HDPCs when treated by 1 μM CBD supplemented in the differentiation media. RT-PCR revealed CBD increased the expression of angiogenic and odontogenic genes, such as DSPP, DMP-1, OPN, ALP, Runx2, VEGFR1 and ICAM-1. These effects were via MAPK activation in a manner mainly mediated by CB2.

CONCLUSION

The results from this study suggested that CBD can induce odonto/osteogenesis from HDPCs and has the potential to develop new therapeutics in VPT in dentistry.

Regeneration of pulp-dentine complex-like tissue in a rat experimental model under an inflammatory microenvironment using high phosphorous-containing bioactive glasses

AIM

To investigate the effects of a bioactive glass with a high proportion of phosphorus (BG-hP) on the repair and regeneration of dental pulps in rats under an inflammatory microenvironment.

METHODOLOGY

Human dental pulp cells (hDPCs) stimulated with 1 μg mL^-1 lipopolysaccharide (LPS) were co-cultured with 0.1 mg mL^-1 BG-hP. Cell proliferation was detected by 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyltetrazolium bromide (MTT) assays. The expression of inflammation-related genes and odontogenic differentiation-related genes was determined by real-time PCR. Alizarin red staining was used to detect the formation of mineralized nodules. Coronal pulp tissues of rat molars were stimulated with 10 mg mL^-1 LPS and then treated with BG-hP. The expression of inflammation-related genes in pulp tissue was determined by real-time PCR. Haematoxylin-eosin staining and Masson staining were performed to observe the inflammatory response and mineralized matrix formation, after subcutaneous implantation in nude mice, at 3 days and 4 weeks, respectively. Analysis of variance was performed to measure statistical significance (P < 0.05).

RESULTS

BG-hP significantly reduced expression of interleukin-6 (IL-6) and IL-8 and significantly upregulated the expression of IL-10, IL-4 and transforming growth factor-β1 of the LPS-stimulated hDPCs (P < 0.05). BG-hP significantly inhibited the initial cell number (P < 0.05), but the hDPCs stimulated by LPS and co-cultured with BG-hP maintained the same proliferation rate as the untreated hDPCs. BG-hP significantly promoted the expression of dentine matrix protein-1 and dentine sialophosphoprotein and the mineralization capacity of the LPS-stimulated hDPCs (P < 0.05). Furthermore, BG-hP significantly downregulated the expression of Il-6 and reduced the inflammatory response of the LPS-stimulated pulp tissue 3 days after subcutaneous implantation (P < 0.05). Four weeks after subcutaneous implantation, BG-hP induced the formation of a continuous layer of dentine-like structure with dentinal tubules and polarizing odontoblast-like cells aligned along it in the LPS-stimulated pulp tissue.

CONCLUSION

The present preliminarily results demonstrated that the bioactive glass with a high proportion of phosphorus inhibited the inflammatory response and promoted the formation of a pulp-dentine complex in a rat experimental model. This study provides a foundation for the construction of materials with the dual functions of exerting anti-inflammatory effects and promoting tissue regeneration to meet the needs of dental pulp repair and regeneration.

Tailored 70S30C Bioactive glass induces severe inflammation as pulpotomy agent in primary teeth: an interim analysis of a randomised controlled trial

OBJECTIVES

This study compared clinical, histologic, and inflammatory outcomes of Biodentine and Bioactive glass (70S30C-BAG) as pulpotomy agents in primary teeth.

METHODS

A randomised, clinical trial was performed recruiting 70 children, 5-9 years old, having ≥ 1 tooth indicated for vital pulpotomy. Participants were randomised to Biodentine or 70S30C-BAG groups. Clinical evaluation was scheduled at 1, 3, 6, 9, and 12 months. Additional 16 teeth were extracted after 6 weeks to assess histologic and inflammatory response (IL-8/IL-10 ratio) using ELISA. Fisher exact, Mann Whitney U test, and t test were used to compare clinical, histologic outcomes and IL-8/IL-10 ratio.

RESULTS

After 3 months, 10 teeth treated with Biodentine were clinically successful, while 9 teeth treated with 70S30C-BAG failed (P < 0.001) necessitating trial termination. Causes of failure were analysed by assessing the pH and ionic release of 70S30C-BAG. Biodentine-treated teeth showed minor inflammation, normal pulp, and hard tissue formation.70S30C-BAG-treated teeth showed severe inflammation, abscesses, root resorption without hard tissue formation. There was a significantly greater percent reduction of IL-8/IL-10 ratio in Biodentine than 70S30C-BAG (mean ± SD = 66.39 ± 18.56 and 40.66 ± 0.86, P = 0.02).

CONCLUSIONS

Biodentine showed favourable clinical, histologic, and anti-inflammatory outcomes, promoting pulp healing and regeneration. 70S30C-BAG resulted in pulp necrosis-through persistent inflammation-causing clinical failure.

CLINICAL RELEVANCE

Biodentine is a promising pulpotomy agent in primary teeth; it promoted healing and regeneration of the dentine-pulp complex. In its current form, 70S30C-BAG is not a suitable pulpotomy agent; it induced persistent inflammation, negating the pulp ability to heal and regenerate. TRN: NCT03786302, 12/19/2018.

The effect of topical application of meloxicam on inflamed dental pulp

Background/purpose

Effective regulation of the inflammatory process is essential for pulp repair and regeneration. Meloxicam has anti-inflammatory activity in systemic administration. The purpose of this study is to observe effects of topically applied meloxicam on inflamed pulp and to explore its potential value in the treatment of pulpitis.

Materials and methods

The coronal pulp tissues of rat molars were stimulated with 10 mg/mL lipopolysaccharide (LPS group) and then treated with 500 μmol/L meloxicam (meloxicam group). The untreated pulp tissues were used as the control group. After 3 h of incubation in vitro, the gene expression of interleukin-6 (IL-6) and tumour necrosis factor-α (TNF-α) in each group was detected by real-time RT-PCR. The pulp tissues of each group were randomly subcutaneously implanted into nude mice, and 500 μmol/L meloxicam was injected into the subcutaneous pocket of the meloxicam group. Haematoxylin eosin staining, Masson staining and immunohistochemical staining were performed on samples after 3 days and 4 weeks retrieval, respectively.

Results

Compared with the LPS group, the mRNA expression levels of TNF-α and IL-6 of the meloxicam group were significantly reduced in vitro. The inflammatory response and cyclooxygenase-2 expression of the meloxicam group were decreased, and osteodentin-like tissue was generated in the pulp cross section of the meloxicam group in vivo.

Conclusion

The topical application of meloxicam inhibits the inflammatory response of inflamed pulp and further promotes the formation of osteodentin-like tissues but fails to induce the formation of the pulp–dentin complex. Topically applied meloxicam has the potential to regulate pulp inflammation.

Dental pulp stem cells response on the nanotopography of scaffold to regenerate dentin-pulp complex tissue

The study of regenerative dentistry receives a fast growing interest. The potential ability of the dentin-pulp complex to regenerate is both promising and perplexing. To answer the challenging nature of the dental environment, scientists have developed various combinations of biomaterial scaffolds, stem cells, and incorporation of several growth factors. One of the crucial elements of this tissue engineering plan is the selection and fabrication of scaffolds. However, further findings suggest that cell behavior hugely depends on mechanical signaling. Nanotopography modifies scaffolds to alter cell migration and differentiation. However, to the best of the author's knowledge, there are very few studies addressing the correlation between nanotopography and dentin-pulp complex regeneration. Therefore, this article presents a comprehensive review of these studies and suggests a direction for future developments, particularly in the incorporation of nanotopography design for dentin-pulp complex regeneration.

Nanocomposite scaffolds composed of Apacite (apatite-calcite) nanostructures, poly (ε-caprolactone) and poly (2-hydroxyethylmethacrylate): The effect of nanostructures on physico-mechanical properties and osteogenic differentiation of human bone marrow mesenchymal stem cells in vitro

Nanocomposite scaffolds were fabricated from poly (ε-caprolactone) (PCL), Poly (2-hydroxyethylmethacrylate) (PHEMA), and Apacite (Apatite-calcite) nanostructures (15 and 25 wt%). The nanoscale structure, physical and chemical properties, mechanical properties, hydrophilic behavior, degradability and osteogenic properties of the fabricated scaffolds were evaluated. The results showed that the mechanical strength, degradation, wetting ability, and mechanical strength of PCL-PHEMA scaffolds significantly increases upon inclusion of Apacite nanoparticles up to 25 wt%. Accordingly, the best mechanical values (E ~ 7.109 MPa and σ ~ 0.414 MPa) and highest degradability (32% within 96 h) were recorded for PCL-PHEMA scaffolds containing 25 wt% of Apacite. Furthermore, highest porosity and roughness were observed in the PCL-PHEMA/25% Apacite as a result of the Apacite nanoparticles inclusion. There was no cytotoxicity recorded for the fabricated scaffolds based on the results obtained from MTT assay and acridine orange staining. Alkaline phosphatase activity, calcium content quantification, Van Kossa staining, FESEM and real time PCR tests confirmed the biomineralization, and the differentiation potential of the nanocomposite scaffolds. Overall, the 3D structure, optimum porosity and balanced dissolution rate of PCL-PHEMA/25% Apacite providing a balanced microenvironment resulted in improved cell adhesion, cell behavior, and replication, as well as osteogenic induction of human bone-marrow-derived mesenchymal stem cells (hBM-MSCs).

Bioactivity assessment of bioactive glasses for dental applications: A critical review

OBJECTIVE

In the context of minimally invasive dentistry and tissue conservation, bioactive products are valuable. The aim of this review was to identify, clarify, and classify the methodologies used to quantify the bioactive glasses bioactivity.

METHODS

Specific search strategies were performed in electronic databases: PubMed, Embase, Cochrane Library, and Scopus. Papers were selected after a review of their title, abstract, and full text. The following data were then examined for final selection: BAG investigated, objectives, criteria, methods, and outcomes.

RESULTS

Sixty-one studies published from 2001 to 2019, were included. The bioactivity of BAG can be evaluated in vitro in contact with solutions, enamel, dentin, or cells. Other studies have conducted in vivo evaluation by BAG contact with dentin and dental pulp. Studies have used various analysis techniques: evaluation of apatite with or without characterization or assessment of mechanical properties. Reprecipitation mechanisms and pulp cell stimulation are treated together through the term 'bioactivity'.

SIGNIFICANCE

Based on these results, we suggested a classification of methodologies for a better understanding of the bioactive properties of BAG. According to all in vitro studies, BAG appear to be bioactive materials. No consensus has been reached on the results of in vivo studies, and no comparison has been conducted between protocols to assess the bioactivity of other bioactive competitor products.

[Effects of scaffold microstructure and mechanical properties on regeneration of tubular dentin]

Tubular dentin is of great significance in the process of tooth tissue and tooth regeneration, because it is not only the structural feature of primary dentin, but also can affect the tooth sensory function, affect the differentiation of dental pulp cells and provide strong mechanical support for teeth. Scaffold is one of the three elements of tissue engineering dentin regeneration. Most experiments on dentin regeneration involve the study of the microstructure and mechanical properties of the scaffold. The microstructure and mechanical characteristics of scaffold materials have important effects on the differentiation and adhesion of odontoblast, it can directly affect the tissue structure of regenerated dentin.

Effect of nanoscale bioactive glass with radial spherical particles on osteogenic differentiation of rat bone marrow mesenchymal stem cells

To validate the feasibility of two types of bioactive glass that contains spherical and radical spherical nano-sized particles in promoting bone repair, we hypothesize that radical spherical nano-sized particles have higher bone repair effectiveness than spherical one due to the physicochemical properties. We rigorously compared the physicochemical properties and bioactivities of these two types of bioactive glass. Specifically, we measured the size, surface morphology, concentration of ionic-dissolution products, bioactivity, and biological effects of two groups of bioactive glass on rat bone marrow mesenchymal stem cells (rBMSCs) and evaluate their effect on proliferation and osteogenic differentiation of rBMSCs in vitro. We observed that spherical nano-bioactive glass (SNBG) was spherical with smooth boundary, while the radial spherical nano-bioactive glass (RSNBG) had radial pore on the surface of particle boundary. When the two materials were immersed in simulated body fluid for 24 h, RSNBG produced more and denser hydroxyapatite carbonate than SNBG. The concentration of Ca and Si ions in RSNBG 24 h extract is higher than that of SNBG, while the concentration of P ions is lower. Proliferation, alkaline phosphatase (ALP) activity, intracellular Ca ion concentrations defined as the number of mineralized nodules produced, and the expression of osteogenic genes were significantly higher in rBMSCs co-cultured with 50 µg/mL RSNBG than SNBG. Overall, these results validated our hypothesis that RSNBG can provide better benefit than SNBG for inducing proliferation and osteogenic differentiation in rBMSCs, in turn suggested the feasibility of this RSNBG in further studies and utilization toward the ends of improved bone repair effectiveness.

Use of nanoparticles in skeletal tissue regeneration and engineering

Bone and osteochondral defects represent one of the major causes of disabilities in the world. Derived from traumas and degenerative pathologies, these lesions cause severe pain, joint deformity, and loss of joint motion. The standard treatments in clinical practice present several limitations. By producing functional substitutes for damaged tissues, tissue engineering has emerged as an alternative in the treatment of defects in the skeletal system. Despite promising preliminary clinical outcomes, several limitations remain. Nanotechnologies could offer new solutions to overcome those limitations, generating materials more closely mimicking the structures present in naturally occurring systems. Nanostructures comparable in size to those appearing in natural bone and cartilage have thus become relevant in skeletal tissue engineering. In particular, nanoparticles allow for a unique combination of approaches (e.g. cell labelling, scaffold modification or drug and gene delivery) inside single integrated systems for optimized tissue regeneration. In the present review, the main types of nanoparticles and the current strategies for their application to skeletal tissue engineering are described. The collection of studies herein considered confirms that advanced nanomaterials will be determinant in the design of regenerative therapeutic protocols for skeletal lesions in the future.

Evaluation of hMSCs Response to Sodium Alginate / Bioactive Glass Composite Paste: Effect of CaO/P2O5, Sodium Alginate Concentration and P/L Ratios

Background:

Bioactive glasses with different compositions have been extensively used as bone tissue engineering. Preparation, development and characterization of alginate pastes containing bioglass for bone repair applications were the purposes of this study.

Objective:

The injectable bone pastes were produced from sol-gel derived bioactive glass nanoparticles with various CaO/P2O5 ratios of 19, 9.5 and 4.75 and sodium alginate solutions with different concentrations of 1, 2 and 4 wt.%. The effect of CaO/P2O5 and powder to liquid (P/L) ratios and alginate concentration on injectability, biodegradation, rheological properties, bioactivity and cellular behavior of the pastes have been studied. The behavior of human mesenchymal stem cells (hMSCs) in the presence of the pastes was assessed by MTT assay, biomineralization assay, ALP activity, Acridine orange staining and Alizarin red staining tests.

Results:

By adding sodium alginate, the pastes exhibited a thixotropy behavior. The storage modulus of all pastes was larger than the loss modulus in the frequency range of 0.1-100 s-1. Cytotoxicity evaluation results revealed that there was a critical amount of bioactive glass in pastes which are above the limit; the viability of hMSCs will be at risk. The pastes made of bioactive glass nanoparticles with CaO/P2O5 = 9.5 and sodium alginate 1% with P/L ratio of 0.8 showed optimum behavior in terms of mineral carrying capacity, injectability characteristics, accellular bioactivity in SBF, loss weight and wash out behavior, proliferation and differentiation of hMSCs.

Conclusion:

According to the results, the pastes prepared with sodium alginate solution and bioactive glass nanoparticles can be beneficial in bone tissue engineering.

Sol-gel bioglasses in dental and periodontal regeneration: A systematic review

Due to their osteoconductive and osteoinductive abilities, bioglasses (BGs) have attracted attention in tissue engineering, especially for mineralized tissue. The aim of this study is to review the current state of the art on the effects of BGs produced by sol-gel on cells for dental and periodontal regeneration. The study also discusses associated antibacterial properties. The research was performed by considering the Preferred Reporting Items for Systematic Reviews and the Meta-Analyses (PRISMA) statement. The research ranged 5 years' window time (from January, 01, 2012, to August, 31, 2017) and the relevant studies were identified based on the inclusion/exclusion criteria. A total of 45 articles were selected from 244 initial returns, plus seven further articles coming from other sources were selected for the same purpose. From this systematic study, it is revealed that only 13 of the 52 articles have proved both the ability of BGs to differentiate dental cells at genetic level and their ability of triggering cell-mediated mineralization, but only six of them showed, along with cells, the antibacterial properties of the glasses. This review shows that sol-gel BGs are not toxic, can sustain cell proliferation and differentiation at a genetic level, and can keep the bacterial population under control. Moreover, a standard methodology and an ideal material are suggested. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1210-1227, 2019.

Long term effects of bioactive glass particulates on dental pulp stem cells in vitro

Bioactive glasses (BG) are known for their ability to induce bone formation by the action of their dissolution products. Glasses can deliver active ions at a sustained rate, determined by their composition and surface area. Nanoporous sol-gel derived BGs can biodegrade rapidly, which can lead to a detrimental burst release of ions and a pHrise. The addition of phosphate into the glass can buffer the pH during dissolution. Here, dissolution of BG with composition 60 mol% SiO

Intracellular co-delivery of Sr ion and phenamil drug through mesoporous bioglass nanocarriers synergizes BMP signaling and tissue mineralization

Inducing differentiation and maturation of resident multipotent stem cells (MSCs) is an important strategy to regenerate hard tissues in mal-calcification conditions. Here we explore a co-delivery approach of therapeutic molecules comprised of ion and drug through a mesoporous bioglass nanoparticle (MBN) for this purpose. Recently, MBN has offered unique potential as a nanocarrier for hard tissues, in terms of high mesoporosity, bone bioactivity (and possibly degradability), tunable delivery of biomolecules, and ionic modification. Herein Sr ion is structurally doped to MBN while drug Phenamil is externally loaded as a small molecule activator of BMP signaling, for the stimulation of osteo/odontogenesis and mineralization of human MSCs derived from dental pulp. The Sr-doped MBN (85Si:10Ca:5Sr) sol-gel processed presents a high mesoporosity with a pore size of ∼6nm. In particular, Sr ion is released slowly at a daily rate of ∼3ppm per mg nanoparticles for up to 7days, a level therapeutically effective for cellular stimulation. The Sr-MBN is internalized to most MSCs via an ATP dependent macropinocytosis within hours, increasing the intracellular levels of Sr, Ca and Si ions. Phenamil is loaded maximally ∼30% into Sr-MBN and then released slowly for up to 7days. The co-delivered molecules (Sr ion and Phenamil drug) have profound effects on the differentiation and maturation of cells, i.e., significantly enhancing expression of osteo/odontogenic genes, alkaline phosphatase activity, and mineralization of cells. Of note, the stimulation is a result of a synergism of Sr and Phenamil, through a Trb3-dependent BMP signaling pathway. This biological synergism is further evidenced in vivo in a mal-calcification condition involving an extracted tooth implantation in dorsal subcutaneous tissues of rats. Six weeks post operation evidences the osseous-dentinal hard tissue formation, which is significantly stimulated by the Sr/Phenamil delivery, based on histomorphometric and micro-computed tomographic analyses. The bioactive nanoparticles releasing both Sr ion and Phenamil drug are considered to be a promising therapeutic nanocarrier platform for hard tissue regeneration. Furthermore, this novel ion/drug co-delivery concept through nanoparticles can be extensively used for other tissues that require different therapeutic treatment.

STATEMENT OF SIGNIFICANCE

This study reports a novel design concept in inorganic nanoparticle delivery system for hard tissues - the co-delivery of therapeutic molecules comprised of ion (Sr) and drug (Phenamil) through a unique nanoparticle of mesoporous bioactive glass (MBN). The physico-chemical and biological properties of MBN enabled an effective loading of both therapeutic molecules and a subsequently sustained/controlled release. The co-delivered Sr and Phenamil demonstrated significant stimulation of adult stem cell differentiation in vitro and osseous/dentinal regeneration in vivo, through BMP signaling pathways. We consider the current combination of Sr ion with Phenamil is suited for the osteo/odontogenesis of stem cells for hard tissue regeneration, and further, this ion/drug co-delivery concept can extend the applications to other areas that require specific cellular and tissue functions.

Evaluation of Pulp Response to Novel Bioactive Glass Pulp Capping Materials

INTRODUCTION

This study aimed to investigate dental pulp responses to novel bioactive glass (BG) pulp capping materials after direct pulp capping in vivo.

METHODS

Novel BG pulp capping materials are composed of powder and fluid. The powder is BG (82.36% SiO₂, 15.36% CaO, and 2.28% P₂O₅), and the fluid is provided in 2 kinds: (1) phosphate buffer solution (BG-PB) and (2) phosphate buffer solution with the addition of 1 wt% sodium alginate (BG-PB-SA). After mixing the powder and fluid, BG-PB and BG-PB-SA were prepared. Cavities with mechanical pulp exposure were prepared on maxillary first molars of Wistar rats. The exposures were randomly capped with BG-PB, BG-PB-SA, or mineral trioxide aggregate (MTA). After 1 (n = 6) and 4 weeks (n = 8), maxillary segments were obtained and prepared for histologic analysis with a scoring system. Statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests with the significance set at .05.

RESULTS

After 1 week, few inflammatory cells were present in the BG-PB, BG-PB-SA, and MTA groups. Moreover, a thin layer of newly generated matrix was observed in most specimens. After 4 weeks, all specimens from the 3 groups formed a heavy dentin bridge. BG-PB and BG-PB-SA groups exhibited no or slight inflammatory response, whereas the MTA group exhibited a slight to moderate inflammatory response. No significant difference was observed in pulp inflammation and dentin formation among the 3 groups at either time point (P > .05).

CONCLUSIONS

When used as a pulp capping agent, BG-PB and BG-PB-SA had similar favorable cellular and inflammatory pulp responses to those of MTA. Therefore, BG is a promising pulp capping material.

Facile synthesis and characterization of novel rapid-setting spherical sub-micron bioactive glasses cements and their biocompatibility in vitro

Dental pulp vitality is extremely important for the tooth viability, since it provides nutrition and forms the dentin. Bioactive glasses (BGs) may be promising materials for pulp repair due to their excellent abilities of rapidly bonding to bone and stimulating new bone growth. However, the unsatisfied handling property, low plasticity, and poor rapid-setting property of traditional BGs limit its application in vital pulp therapy. Spherical bioactive glasses (SBGs) exhibited higher osteogenesis and odontogenic differentiation than irregular BGs. This study focuses on the application of SBGs with rapid setting property for dental pulp repair. Here, SBGs with various compositions were successfully synthesized by a sol-gel process using dodecylamine (DDA) served as both a catalyst and a template. The maximum content of CaO in SBGs was about 15%. The non-bridge oxygen amounts of the SiO network and the apatite-forming ability increased with the content proportion of CaO and P₂O₅. Bioactive glass pulp capping materials (BGPCMs) were prepared by mixing the SBGs powders and the phosphate buffer solution (PBS). The K₃CaH(PO₄)₂ and hydroxyapatite (HA) formed between SBGs particles as soon as they were mixed with PBS solution. The compressive strengths of fully set BCPCM-2 molded were measured to be 31.76±1.9577MPa after setting for 24h. The K₃CaH(PO₄)₂ and the low crystallinity HA phases at the initial stage of solidification transformed to crystalline HA for 3days, and the compressive strength was still higher than 10MPa. Additionally, SBG-2 with a designed molar composition of 35% SiO₂, 55% CaO and 10% P₂O₅ more promoted dental pulp cell proliferation, and could be potential pulp capping applications.

In vitro proliferation and differentiation of human bone marrow mesenchymal stem cells into osteoblasts on nanocomposite scaffolds based on bioactive glass (64SiO2-31CaO-5P2O5)-poly-l-lactic acid nanofibers fabricated by electrospinning method

Electrospinning method was employed for fabrication of SiO₂-CaO-P₂O₅ bioactive glass (BG) nanofibers, poly-l-lactic acid (PLLA) nanofibers and nanocomposite scaffolds fabricated from as-prepared nanofibers. Characterization of the prepared nanofibers and scaffolds by XRD, FTIR, and SEM techniques revealed the formation of nanofibers with mean diameter of about 500nm and fully fibrous scaffolds with porous structure and interconnected pores. The growth, viability and proliferation of cultured human bone marrow mesenchymal stem cells in the fabricated nanofibers and bioactive glass-poly-l-lactic acid (BG-PLLA) nanocomposite scaffolds were studied using various biological assays including MTT, ALP activity, calcium deposit content, Alizarin red staining, and RT-PCR test. Based on the obtained results, incorporation of BG nanofibers in the nanocomposite scaffolds causes the better biological behavior of the scaffolds. In addition, three-dimensional and fibrous-porous structure of the scaffolds further contributes to their improved cell behavior compared to the components.

The Biomineralization of a Bioactive Glass-Incorporated Light-Curable Pulp Capping Material Using Human Dental Pulp Stem Cells

The aim of this study was to investigate the biomineralization of a newly introduced bioactive glass-incorporated light-curable pulp capping material using human dental pulp stem cells (hDPSCs). The product (Bioactive® [BA]) was compared with a conventional calcium hydroxide-incorporated (Dycal [DC]) and a light-curable (Theracal® [TC]) counterpart. Eluates from set specimens were used for investigating the cytotoxicity and biomineralization ability, determined by alkaline phosphatase (ALP) activity and alizarin red staining (ARS). Cations and hydroxide ions in the extracts were measured. An hDPSC viability of less than 70% was observed with 50% diluted extract in all groups and with 25% diluted extract in the DC. Culturing with 12.5% diluted BA extract statistically lowered ALP activity and biomineralization compared to DC (p < 0.05), but TC did not (p > 0.05). Ca (~110 ppm) and hydroxide ions (pH 11) were only detected in DC and TC. Ionic supplement-added BA, which contained similar ion concentrations as TC, showed similar ARS mineralization compared to TC. In conclusion, the BA was similar to, yet more cytotoxic to hDPSCs than, its DC and TC. The BA was considered to stimulate biomineralization similar to DC and TC only when it released a similar amount of Ca and hydroxide ions.

Regeneration of dental–pulp complex-like tissue using phytic acid derived bioactive glasses

Phytic acid derived bioactive calcium phosphosilicate (PSC) glasses were synthesised by using phytic acid as a phosphorus precursor. PSC have superior biocompatibility for dental pulp cells and ability to regenerate dentin–pulp complex to 45S5.

Biomaterials to Facilitate Delivery of RNA Agents in Bone Regeneration and Repair

Bone healing after traumatic injuries or pathological diseases remains an important worldwide problem. In search of safer and more effective approaches to bone regeneration and repair, RNA-based therapeutic agents, specifically microRNAs (miRNAs) and short interfering RNA (siRNA), are beginning to be actively explored. In this review, we summarize current attempts to employ miRNAs and siRNAs in preclinical models of bone repair. We provide a summary of current limitations when attempting to utilize bioactive nucleic acids for therapeutic purposes and position the unique aspects of RNA reagents for clinical bone repair. Delivery strategies for RNA reagents are emphasized and nonviral carriers (biomaterial-based) employed to deliver such reagents are reviewed. Critical features of biomaterial carriers and various delivery technologies centered around nanoparticulate systems are highlighted. We conclude with the authors' perspectives on the future of the field, outlining main critical issues important to address as RNA reagents are explored for clinical applications.

Gene delivery nanocarriers of bioactive glass with unique potential to load BMP2 plasmid DNA and to internalize into mesenchymal stem cells for osteogenesis and bone regeneration

The recent development of bioactive glasses with nanoscale morphologies has spurred their specific applications in bone regeneration, for example as drug and gene delivery carriers. Bone engineering with stem cells genetically modified with this unique class of nanocarriers thus holds great promise in this avenue. Here we report the potential of the bioactive glass nanoparticle (BGN) system for the gene delivery of mesenchymal stem cells (MSCs) targeting bone. The composition of 15% Ca-added silica, proven to be bone-bioactive, was formulated into surface aminated mesoporous nanospheres with enlarged pore sizes, to effectively load and deliver bone morphogenetic protein-2 (BMP2) plasmid DNA. The enlarged mesopores were highly effective in loading BMP2-pDNA with an efficiency as high as 3.5 wt% (pDNA w.r.t. BGN), a level more than twice than for small-sized mesopores. The BGN nanocarriers released the genetic molecules in a highly sustained manner (for as long as 2 weeks). The BMP2-pDNA/BGN complexes were effectively internalized to rat MSCs with a cell uptake level of ∼73%, and the majority of cells were transfected to express the BMP2 protein. Subsequent osteogenesis of the transfected MSCs was demonstrated by the expression of bone-related genes, including bone sialoprotein, osteopontin, and osteocalcin. The MSCs transfected with BMP2-pDNA/BGN were locally delivered inside a collagen gel to the target calvarium defects. The results showed significantly improved bone regeneration, as evidenced by the micro-computed tomographic, histomorphometric and immunohistochemical analyses. This study supports the excellent capacity of the BGN system as a pDNA-delivery nanocarrier in MSCs, and the engineered system, BMP2-pDNA/BGN with MSCs, may be considered a new promising candidate to advance the therapeutic potential of stem cells through genetic modification, targeting bone defects and diseases.

Effect of Aminated Mesoporous Bioactive Glass Nanoparticles on the Differentiation of Dental Pulp Stem Cells

Mesoporous bioactive nanoparticles (MBNs) have been developed as promising additives to various types of bone or dentin regenerative material. However, biofunctionality of MBNs as dentin regenerative additive to dental materials have rarely been studied. We investigated the uptake efficiency of MBNs-NH2 with their endocytosis pathway and the role of MBNs-NH2 in odontogenic differentiation to clarify inherent biofunctionality. MBNs were fabricated by sol-gel synthesis, and 3% APTES was used to aminate these nanoparticles (MBNs-NH2) to reverse their charge from negative to positive. To characterize the MBNs-NH2, TEM, XRD, FTIR, zeta(ξ)-potential measurements, and Brunauer-Emmett-Teller analysis were performed. After primary cultured rat dental pulp stem cells (rDPSCs) were incubated with various concentrations of MBNs-NH2, stem cell viability (24 hours) with or without differentiated media, internalization of MBNs-NH2 in rDPSCs (~4 hours) via specific endocytosis pathway, intra or extracellular ion concentration and odontoblastic differentiation (~28 days) were investigated. Incubation with up to 50 μg/mL of MBNs-NH2 had no effect on rDPSCs viability with differentiated media (p>0.05). The internalization of MBNs-NH2 in rDPSCs was determined about 92% after 4 hours of incubation. Uptake was significantly decreased with ATP depletion and after 1 hour of pre-treatment with the inhibitor of macropinocytosis (p<0.05). There was significant increase of intracellular Ca and Si ion concentration in MBNs-NH2 treated cells compared to no-treated counterpart (p<0.05). The expression of odontogenic-related genes (BSP, COL1A, DMP-1, DSPP, and OCN) and the capacity for biomineralization (based on alkaline phosphatase activity and alizarin red staining) were significantly upregulated with MBNs-NH2. These results indicate that MBNs-NH2 induce odontogenic differentiation of rDPSCs and may serve as a potential dentin regenerative additive to dental material for promoting odontoblast differentiation.

Infection and Pulp Regeneration

The regeneration of the pulp-dentin complex has been a great challenge to both scientists and clinicians. Previous work has shown that the presence of prior infection may influence the characteristics of tissues formed in the root canal space after regenerative endodontic treatment. The formation of ectopic tissues such as periodontal ligament, bone, and cementum has been observed in the root canal space of immature necrotic teeth with apical periodontitis, while the regeneration of dentin and pulp has been identified in previously non-infected teeth.  The current regenerative endodontic therapy utilizes disinfection protocols, which heavily rely on chemical irrigation using conventional disinfectants. From a microbiological point of view, the current protocols may not allow a sufficiently clean root canal microenvironment, which is critical for dentin and pulp regeneration. In this article, the significance of root canal disinfection in regenerating the pulp-dentin complex, the limitations of the current regenerative endodontic disinfection protocols, and advanced disinfection techniques designed to reduce the microorganisms and biofilms in chronic infection are discussed.

Inhibition of osteoclastogenesis through siRNA delivery with tunable mesoporous bioactive nanocarriers

Gene silencing through siRNA delivery has shown great promise for treating diseases and repairing damaged tissues, including bone. This report is the first to develop siRNA delivery system in the inhibition of osteoclastic functions which in turn can help turn-over bone mass increase in the diseases like osteoporosis. For this reason, biocompatible and degradable nanocarriers that can effectively load and deliver genetic molecules to target cells and tissues are being actively sought by researchers. In this study, mesoporous bioactive glass nanospheres (MBG), a novel unique biocompatible degradable inorganic nanocarrier, is introduced. Furthermore, siRNA was designed to function by inhibiting the expression of the receptor activator of nuclear factor kappa B (RANK) in order to suppress osteoclastogenesis. Amine-functionalized MBG were synthesized with tunable mesoporosities, showing a strong complexation with siRNA. An in vitro release profile indicated that the siRNA from the MBG was able to achieve a highly sustainable liberation for up to 4 days, confirming a temporary delivery system can be designed to function for that period of time. The intracellular uptake capacity of the complex siRNA(RANK)-MBG was recorded to be around 70%. Furthermore, the RANK-expressing cell population declined down to 29% due to the delivery of siRNA(RANK)-MBG (vs. 86% in control). The expression of osteoclastogenesis-related genes, including c-fos, cathepsin-K, tartrate-resistant acid phosphatase (TRAP), and nuclear factor of activated T-cells cytoplasmic 1 (NFATc1), was substantially down-regulated by the siRNA delivery system. This study reports for the first time on the use of a novel MBG delivery system for siRNA that aims to suppress osteoclastic actions. MBGs may be a potential gene delivery platform for hard tissue repair and disease treatment due to the collective results which indicate a high loading capacity, temporary release kinetics, high intracellular uptake rate, and sufficient gene silencing effects, together with the intrinsic beneficial properties like bone-bioactivity and degradability.

STATEMENT OF SIGNIFICANCE

This report is the first to develop siRNA delivery system of biocompatible and degradable nanocarriers made from a unique composition, i.e., mesoporous bioactive glass that can effectively load and deliver genetic molecules to osteoclastic cells. We proved through a series of studies that the biocompatible nanocarriers are effective for the delivery of siRNA in the inhibition of osteoclastic functions which thus might be considered as a nanocarrier platform to help turn-over bone mass increase in the diseases like osteoporosis.