Microneedles for transdermal drug delivery

3D-printed microneedles loaded with madecassoside for periodontal soft tissue regeneration

Gingival recession is a common clinical concern. While surgical intervention remains the conventional approach for periodontal soft tissue regeneration, it is often associated with trauma. Recent advancements emphasize minimally invasive and effective alternatives. This study developed a hydrogel microneedle (MN) patch loaded with madecassoside using 3D printing technology to promote periodontal soft tissue regeneration. The PEGDA hydrogel-based MN patch exhibited excellent mechanical properties and biocompatibility, enabling effective skin penetration. In vitro studies demonstrated that madecassoside at specific concentrations enhanced gingival fibroblast proliferation and type I collagen expression. Animal experiments further confirmed that microneedles containing madecassoside effectively promoted periodontal soft tissue regeneration in rabbits. These findings demonstrate the potential of 3D-printed hydrogel microneedles as a promising approach for periodontal soft tissue regeneration, supporting both tissue repair and collagen synthesis.

Platelet-rich plasma for androgenetic alopecia: intradermal injection or microneedle delivery?

OBJECTIVE

This study compared the clinical effectiveness of two methods of platelet-rich plasma (PRP) administration for treating androgenetic alopecia (AGA): microneedle delivery and intradermal injection. The study also evaluated adverse reactions associated with both methods.

PATIENTS AND METHODS

Twenty patients with AGA were selected according to specific inclusion and exclusion criteria. The scalp of each patient was divided into two treatment areas along the midline, each randomly assigned to receive PRP either via intradermal injection (n = 20) or microneedle delivery (n = 20). The treatment comprised three sessions spaced 1 month apart. Scalp photographs and trichoscopic measurements were obtained before the first session and 6 month after the final session. Patient outcomes were assessed 6 month after the last treatment using the Global Aesthetic Improvement Scale and a self-satisfaction questionnaire. Pain levels during the first session were measured using a Numerical Rating Scale, and adverse reactions were recorded throughout the study.

RESULTS

Six month after completing all treatments, no significant differences were observed between the microneedle delivery and intradermal injection groups for hair density, hair diameter, single hair follicle ratio, or trichoscopic findings (p > .05). However, the microneedle group reported significantly lower pain levels than the intradermal injection group (p < .001). No adverse events were observed during the treatment period.

CONCLUSION

The clinical efficacy of microneedle delivery of PRP was comparable to that of intradermal injection for AGA treatment, with the added benefit of significantly lower pain levels. This suggests that microneedle delivery may be a promising alternative for AGA management.

Advancements in vaccine delivery: harnessing 3D printing for microneedle patch technology

The development of 3D-printed microneedle (MN) technology is a significant step in vaccine delivery, providing a painless, effective, and adaptable substitute for conventional injection-based techniques. Direct transdermal vaccination distribution without the need for needles is made possible by microneedle patches, which employ a variety of tiny needles that dissolve when they penetrate the skin. By using 3D printing to precisely customise microneedles' size, shape, and density to meet particular vaccine requirements, administration control can be improved and vaccine efficiency may even be increased. Furthermore, rapid prototyping made possible by 3D printing speeds up the development process, enabling quicker testing and improvement of vaccines. Additionally, this scalable technology can greatly increase vaccine accessibility, particularly in environments with limited resources. Research indicates that by directly interacting with the skin's immune-rich layers, microneedle patches enhance antigen delivery and elicit a strong immune response. Because MN technology offers a useful, self-administrable vaccination approach with little waste, it has significant potential for use in public health applications, notably during pandemics. This study emphasises how 3D-printed microneedle patches have the potential to revolutionise vaccination procedures and increase vaccine accessibility globally.

Devices to overcome the buccal mucosal barrier to administer therapeutic peptides

Peptide therapeutics are important in healthcare owing to their high target specificity, therapeutic efficacy, and relatively low side effect profile. Injections of these agents have improved thetreatment of chronic diseases including autoimmune, metabolic disorders, and cancer. However, their administration via injections can prove a barrier to patient acceptability of treatments. While oral delivery of these molecules is preferable, oral peptide formulations are associated with limited bioavailability due to degradation in the intestine and low epithelial permeability. Buccal administration of peptides is a potential alternative to injections and oral formulations. Similar to the oral route, the buccal route can promote better patient adherence to dosing regimens, along with the added advantages of not requiring restriction on food or drink consumption before and after administration, as well as avoidance of the liver first-pass metabolism. However, like oral, effective buccal absorption of peptides is still challenging due to the high epithelial permeability barrier. We present a multidisciplinary approach to understanding the buccal physiological barrier to macromolecule permeation and discuss how engineered devices may overcome it. Selected examples of buccal devices can facilitate fast and efficient macromolecule absorption through multiple mechanisms including physical disruption of epithelia, convection-based mass transfer, and a combination of physicochemical strategies. Importantly, minimally invasive devices can be self-applied and are associated with the maintenance of the barrier after exposure. We analysed the critical attributes that are required forthe clinical translation of buccal peptide administration devices. These include performance-driven device development, manufacturing features, patient acceptability, and commercial viability.

Angiostatin: a promising therapeutic target for atopic dermatitis

Angiostatin, a 38-45 KDa proteolytic fragment derived from plasminogen, has garnered significant attention for its dual roles in inhibiting angiogenesis and modulating inflammation. We employed bidirectional Mendelian randomization (MR), meta-analysis, and colocalization to investigate the causal relationship between angiostatin and atopic dermatitis (AD) using three angiostatin and two AD datasets. Additionally, we analyzed global epidemiological trends (1990-2021) and performed transcriptomic profiling of AD. MR analyses revealed a protective effect of angiostatin on AD risk (combined odds ratio: 0.9437, 95% confidence interval [CI]: 0.9198-0.9683, p < 0.0001), while reverse analyses showed no association (standardized mean difference: -0.0029, 95% CI: -0.0516-0.0459, p = 0.9084). Colocalization indicated no shared causal variants (H4 probabilities < 80%). Epidemiological trends highlighted declining age-standardized AD rates despite rising case numbers. Transcriptomic analyses implicated NF-κB, PI3K-Akt, and JAK-STAT pathways in AD pathogenesis. These findings position angiostatin as a dual-action therapeutic candidate, offering novel opportunities to simultaneously target vascular remodeling and immune dysregulation in AD. Translational research is warranted to harness its clinical potential.

Modelling receptor-mediated endocytosis in hollow microneedle-based verapamil delivery through viscoelastic skin

Drug delivered from the microneedle (MN) tip diffuses across the viscoelastic skin before entering the blood compartment and being absorbed. Reversible uptake kinetics between the blood and tissue compartments, reversible specific saturable binding with its receptors, and endocytosis are given due attention. Simulations predict that, unlike skin thinning, skin viscoelasticity and a higher Young's modulus value, as in an older person, inhibit verapamil diffusion within the skin, and metabolism stabilises the concentrations in the blood and tissue compartments. Simultaneously, the irreversible uptake kinetics improve drug concentrations in the tissue compartment, facilitating receptor-mediated endocytosis. The results also predict that internalised verapamil increases with time at slower internalisation rates; however, at higher rates, it attains a peak value before gradually diminishing. Furthermore, as the rate of lysosomal degradation escalates, the peak value of internalised concentration diminishes and shifts upward. A comprehensive sensitivity analysis has been performed because of uncertainty about several crucial parameters. Our findings align well with the existing literature.

Schizophrenia Treatment Based on Sustained Release of Risperidone from Poly(lactic-co-glycolic) Acid Implantable Microarray Patch

Schizophrenia is one of the most severe mental disorders, affecting approximately 24 million people worldwide. Conventional treatments, such as drug-loaded implants and intramuscular injections, have several limitations, including pain during administration and the need for medical professionals to perform the procedure. In this study, a poly(lactic-co-glycolic) acid (PLGA)-based implantable microneedle patch (IMN) was developed for the transdermal delivery of risperidone (RIS) as a treatment for schizophrenia. RIS IMNs were prepared by sequentially casting gel-based formulations into microneedle (MN) molds. The patches were then characterized using microscopy, differential scanning calorimetry, and infrared spectroscopy, as well as through evaluations of MN insertion and RIS release. A selected formulation was further tested by evaluating its cytocompatibility and its ability to deliver RIS in a rat animal model. The RIS IMN demonstrated excellent mechanical properties, successfully inserting up to 378 nm into model skin, which is crucial for effective transdermal drug delivery. A biocompatibility study using human dermal fibroblasts showed no cytotoxicity, with cell viability and proliferation being close to 100%. The optimized formulation achieved a sustained in vitro release over 7 days, while ex vivo skin deposition and permeation studies showed over 65% RIS delivery efficiency. In vivo animal studies confirmed that RIS IMNs maintained therapeutic plasma concentrations throughout the nine-day experiment, with Cmax values of RIS and 9-OH RIS reaching 387.96 ± 194.02 and 139.89 ± 47.68 ng/mL at 6 and 96 h, respectively. In contrast, intramuscular injection showed a Cmax of 1756.70 ± 246.06 and 1377.38 ± 160.78 ng/mL at 2 and 6 h but lost therapeutic effect after just 24 h. These findings suggest that RIS IMNs offer significant clinical benefits for patients with schizophrenia, providing prolonged therapeutic effects with a simple, self-administering drug delivery system, reducing the need for frequent medical interventions.

Skin-penetrating peptides (SKPs): Enhancing skin permeation for transdermal delivery of pharmaceuticals and cosmetic compounds

Skin-penetrating peptides (SKPs) are emerging as a promising class of permeation enhancers that can facilitate macromolecule delivery across the skin. Although their pharmaceutical applications are under extensive study, SKPs are crucial for enhancing skin permeability, enabling larger molecules to penetrate the stratum corneum. This review explores the transformative role of SKPs in non-invasive transdermal drug delivery. Drawing from an extensive collection of literature, it provides insights into the current usage and application of SKPs as tools to enhance skin permeability and facilitate the delivery of larger molecules. Additionally, it highlights the opportunities, challenges, and future directions for SKP applications in transdermal drug delivery.

Metal-organic framework microneedles for precision transdermal drug delivery: design strategy and therapeutic potential

Metal-organic frameworks (MOFs) are porous materials renowned for their high porosity, large specific surface area, biocompatibility, and biodegradability. Hydrogel microneedles (MNs) is an emerging technology that minimally disrupts the skin or mucosal membranes, bypassing gastrointestinal absorption and the rapid metabolism typical of oral drug delivery. Over the past few decades, both MOFs and MNs have found applications across a range of fields. However, MOFs alone cannot penetrate the skin or mucosal barrier to deliver drugs effectively, and MNs have limited direct loading capacity. When combined, MOFs enhance the loading efficiency of therapeutic agents in hydrogel MNs and optimize their release kinetics. Additionally, the incorporation of MOFs improves the mechanical properties of hydrogel MNs, increasing their permeability to the skin. In turn, hydrogel MNs enable MOFs-whether therapeutically active or drug-loaded-to bypass the skin or mucosal barrier and deliver active compounds directly to the target site for localized treatment. This review discusses the structural features and preparation methods of MOFs and MOF-based MNs, explores their synergistic potential, and highlights strategies for integrating MOFs with MNs to enhance transdermal drug delivery in applications such as wound healing, scar management, acne treatment, and tumor suppression. Finally, we examine the challenges and future potential of MOF-based MNs and offer insights into their role in advancing transdermal therapies.

Glassy Drug Microneedle Array Design: Drug Glass-Forming Ability and Stability

Glassy microneedles, composed only of drug, provide an intradermal alternative to oral or parenteral drug delivery. Compared to microneedles composed of drug-polymer solid dispersions, they offer higher drug loading while possessing mechanical strength for skin penetration. However, their microneedle structure and associated mechanical strength are reliant on the component glass stability. This study investigates relationships between the glass stability of drug-only microneedles and drug glass-forming ability (GFA), determined by differential scanning calorimetry (DSC) analysis. The glass stability of microneedles fabricated from six drugs was evaluated at 2-8 °C under nitrogen, 25 °C/60% relative humidity (RH), and 40 °C/75% RH. Drug glass stability was determined by visual assessment of microneedle appearance, together with DSC and powder X-ray diffraction analysis of the drug melt cooled outside the microneedle molds. Glassy microneedle structure was retained for all drugs stored at 2-8 °C under nitrogen for 3 months. Drug GFA classes informed glass stability under dry (nitrogen) environments at temperatures below their glass transition temperature. Under controlled humidity conditions, all glass microneedles crystallized, except for itraconazole. Drug GFA did not inform microneedle glass stability when exposed to water vapor during storage due to water absorption and glass plasticization. Itraconazole's glass stability was attributed to the interaction of absorbed water with liquid crystalline phases present in the itraconazole glass. The results highlight how glassy microneedle stability is informed by storage below Tg and glass interaction with moisture vapor. Results also demonstrate how the skin penetration efficiency of glassy microneedles is maintained during storage by selecting stabilizing storage conditions.

Enhanced model antigen retention in tissue through topical high-frequency ultrasound treatment

Reproducible control of tissue delivery and retention of a therapeutic agent facilitates the maximization of the efficacy of pharmacotherapy. Despite the proposal of various chemical and physical methods for modulating drug delivery and retention, the choice of the physical modality for this purpose has been limited in clinical practice. Thus, this study proposes a novel strategy for modulating the retention of a model antigen in tissues by using non-tissue-damaging high-frequency ultrasoundAfter the injection of a fluorescently labeled model antigen, followed by brief treatment with high-frequency ultrasound (5-20 MHz), the clearance of the antigen was monitored using a real-time near-infrared (NIR) fluorescence imaging system in vivo. Further, ultrasound treatment increased tissue retention at the site of model antigen administration. The results suggested that high-frequency ultrasound could change the response to a macromolecule injected into the tissue, such as a vaccine, thereby modulating the immune response. The proposed ultrasound-based technology is translatable to clinical settings and benefits from well-established ultrasound technologies that have been employed in various medical applications for decades. Moreover, this approach can be broadly applied to enhance the therapeutic effects of current and future immune-mediated therapeutic systems.

Transdermal delivery of PeptiCRAd cancer vaccine using microneedle patches

Microneedles (MNs) are a prospective system in cancer immunotherapy to overcome barriers regarding proper antigen delivery and presentation. This study aims at identifying the potential of MNs for the delivery of Peptide-coated Conditionally Replicating Adenoviruses (PeptiCRAd), whereby peptides enhance the immunogenic properties of adenoviruses presenting tumor associated antigens. The combination of PeptiCRAd with MNs containing polyvinylpyrrolidone and sucrose was tested for the preservation of structure, induction of immune response, and tumor eradication. The findings indicated that MN-delivered PeptiCRAd was effective in peptide presentation in vivo, leading to complete tumor rejection when mice were pre-vaccinated. A rise in the cDC1 population in the lymph nodes of the MN treated mice led to an increase in the effector memory T cells in the body. Thus, the results of this study demonstrate that the combination of MN technology with PeptiCRAd may provide a safer, more tolerable, and efficient approach to cancer immunotherapy, potentially translatable to other therapeutic applications.

Trends and Hotspots in Nanomedicine Applications for Pain: A Bibliometric Analysis from 1999 to 2024

Background: Pain, especially chronic pain, is a leading cause of individuals seeking medical attention and presents a significant public health challenge due to its widespread prevalence and associated healthcare costs. Nanomedicine has shown considerable potential in pain management research. However, there is a lack of comprehensive bibliometric and trend analyses that explore the current status, research hotspots, and future directions of nanomedicine applications in pain. Methods: To fill this gap, we analyzed English language publications related to nanomedicine and pain from the Web of Science Core Collection, spanning the period from January 1, 1999, to May 24, 2024. The analysis focused on publication trends, contributions by countries/regions, institutions, journals, research categories, prominent authors, key references, and keywords. Results: A total of 2370 papers were included. China leads in the number of published papers (785, 33.12%) and hosts numerous high-output institutions and funding agencies, followed by the USA. The International Journal of Pharmaceutics emerged as the leading journal in terms of publication volume. A clear interdisciplinary platform has been established between nanomedicine and the field of pain. "Nanoparticles" and "drug delivery" were identified as high-frequency keywords. The drug delivery systems for pain treatment were considered the main research hotspots, particularly for chronic pain. The keyword citation bursts indicate that the pain of biomarker monitoring is a future trend. Conclusions: The application of nanomedicine in pain has advanced rapidly. Increased funding and international collaboration are necessary with future potential to expand from pain treatment to monitoring and diagnosis.

Drug Repurposing and Nanotechnology for Topical Skin Cancer Treatment: Redirecting toward Targeted and Synergistic Antitumor Effects

Skin cancer represents a major health concern due to its rising incidence and limited treatment options. Current treatments (surgery, chemotherapy, radiotherapy, immunotherapy, and targeted therapy) often entail high costs, patient inconvenience, significant adverse effects, and limited therapeutic efficacy. The search for novel treatment options is also marked by the high capital investment and extensive development involved in the drug discovery process. In response to these challenges, repurposing existing drugs for topical application and optimizing their delivery through nanotechnology could be the answer. This innovative strategy aims to combine the advantages of the known pharmacological background of commonly used drugs to expedite therapeutic development, with nanosystem-based formulations, which among other advantages allow for improved skin permeation and retention and overall higher therapeutic efficacy and safety. The present review provides a critical analysis of repurposed drugs such as doxycycline, itraconazole, niclosamide, simvastatin, leflunomide, metformin, and celecoxib, formulated into different nanosystems, namely, nanoemulsions and nanoemulgels, nanodispersions, solid lipid nanoparticles, nanostructured lipid carriers, polymeric nanoparticles, hybrid lipid-polymer nanoparticles, hybrid electrospun nanofibrous scaffolds, liposomes and liposomal gels, ethosomes and ethosomal gels, and aspasomes, for improved outcomes in the battle against skin cancer. Enhanced antitumor effects on melanoma and nonmelanoma research models are highlighted, with some nanoparticles even showing intrinsic anticancer properties, leading to synergistic effects. The explored research findings highly evidence the potential of these approaches to complement the currently available therapeutic strategies in the hope that these treatments might one day reach the pharmaceutical market.

Droplet-based 3D bioprinting for drug delivery and screening

Recently, the conventional criterion of "one-size-fits-all" is not qualified for each individual patient, requiring precision medicine for enhanced therapeutic effects. Besides, drug screening is a high-cost and time-consuming process which requires innovative approaches to facilitate drug development rate. Benefiting from consistent technical advances in 3D bioprinting techniques, droplet-based 3D bioprinting techniques have been broadly utilized in pharmaceutics due to the noncontact printing mechanism and precise control on the deposition position of droplets. More specifically, cell-free/cell-laden bioinks which are deposited for the fabrication of drug carriers/3D tissue constructs have been broadly utilized for precise drug delivery and high throughput drug screening, respectively. This review summarizes the mechanism of various droplet-based 3D bioprinting techniques and the most up-to-date applications in drug delivery and screening and discusses the potential improvements of droplet-based 3D bioprinting techniques from both technical and material aspects. Through technical innovations, materials development, and the assistance from artificial intelligence, the formation process of drug carriers will be more stable and accurately controlled guaranteeing precise drug delivery. Meanwhile, the shape fidelity and uniformity of the printed tissue models will be significantly improved ensuring drug screening efficiency and efficacy.

Microneedle-Assisted Delivery of Curcumin: Evaluating the Effects of Needle Length and Formulation

Dermal drug delivery presents a significant challenge for poorly soluble active compounds like curcumin, which often struggle to penetrate the skin barrier effectively. In this study, the dermal penetration efficacy of curcumin nanocrystals and bulk suspensions when applied to skin using microneedles of varying lengths-0.25 mm, 0.5 mm, and 1.0 mm-was investigated in an ex vivo porcine ear model. The findings revealed that all formulations, in conjunction with microneedle application, facilitated transepidermal penetration; however, the combination of microneedles and curcumin nanocrystals demonstrated the highest efficacy. Notably, the 1.0 mm microneedle length provided optimal penetration, significantly enhancing curcumin delivery compared with bulk suspensions alone. Additionally, even the use of 0.25 mm microneedles resulted in a high level of efficiency, indicating that shorter microneedles can still effectively facilitate drug delivery. Overall, this study underscores the potential of microneedle technology in improving the transepidermal absorption of poorly soluble actives like curcumin, suggesting that the integration of nanocrystals with microneedles could enhance the therapeutic effects of topical curcumin applications.

Liposome-loaded dissolvable microneedle patches for more efficient intradermal antigen delivery of Hepatitis B vaccine

The aim of this study was to improve the efficacy of Hepatitis B surface antigen (HBsAg) vaccination via liposome-loaded dissolvable microneedle (Lipo-dMN) patches. HBsAg liposomes were prepared using the thin-film hydration method and subsequently incorporated into dissolvable microneedle patches via a pre-vacuum approach. Liposomes, dissolvable microneedle patches (dMN), and Lipo-dMN were characterized for encapsulation efficiency, mechanical properties, morphology, skin insertion, in vitro release, cellular uptake, and in vivo vaccination studies. The HBsAg was encapsulated into liposomes with encapsulation efficiencies around 50 %, particle size around 160 nm, and zeta potential around -20 mV. HBsAg can maintain its activity during the preparation of dMN and Lipo-dMN. The intact pyramid microneedle has a sharp end and strong mechanical properties that allow easy insertion into the ex vivo pig skin. The dMN and Lipo-dMN, with a mechanical property of 1.6 N, readily penetrate the epidermis and release the HBsAg and HBsAg liposome to modulate the immune response. A comprehensive comparison of HBsAg subcutaneous injection and intradermal delivery of HBsAg and HBsAg liposome by dMN revealed different levels of anti-HBsAg IgG antibody. Inoculation with dMN and Lipo-dMN resulted in significantly higher levels of anti-HBsAg IgG antibodies (p < 0.01) compared to subcutaneous injection of HBsAg. In addition, we found that IgG levels increased significantly (P < 0.05) with increased dose of subcutaneous injection of HBsAg and intradermal delivery of dMN, but the opposite effect was observed in Lipo-dMN. The possible mechanism for this observation may be the increased cellular uptake of liposomes by BMDCs upon long-term incubation. In summary, this study presents a promising approach to enhance HBsAg vaccination efficacy through the synergistic combination of liposomes and dissolvable microneedles at reduced vaccine doses.

Modelling Hollow Microneedle-Mediated Drug Delivery in Skin Considering Drug Binding

Background/Objectives: Microneedle(MN)-based drug delivery is one of the potential approaches to overcome the limitations of oral and hypodermic needle delivery. An in silico model has been developed for hollow microneedle (HMN)-based drug delivery in the skin and its subsequent absorption in the blood and tissue compartments in the presence of interstitial flow. The drug's reversible specific saturable binding to its receptors and the kinetics of reversible absorption across the blood and tissue compartments have been taken into account. Methods: The governing equations representing the flow of interstitial fluid, the transport of verapamil in the viable skin and the concentrations in the blood and tissue compartments are solved using combined Marker and Cell and Immersed Boundary Methods to gain a quantitative understanding of the model under consideration. Results: The viscoelastic skin is predicted to impede the transport of verapamil in the viable skin and, hence, reduce the concentrations of all forms in the blood and the tissue compartments. The findings reveal that a higher mean concentration in the viable skin is not always associated with a longer MN length. Simulations also predict that the concentrations of verapamil in the blood and bound verapamil in the tissue compartment rise with decreasing tip diameters. In contrast, the concentration of free verapamil in the tissue increases with increasing injection velocities. Conclusions: The novelty of this study includes verapamil metabolism in two-dimensional viscoelastic irregular viable skin and the nonlinear, specific, saturable, and reversible binding of verapamil in the tissue compartment. The tip diameter and the drug's injection velocity are thought to serve as regulatory parameters for the effectiveness and efficacy of MN-mediated therapy if the MN is robust enough to sustain the force needed to penetrate a wider tip into the skin.

Leveraging Microneedles for Raised Scar Management

Disruption of the molecular pathways during physiological wound healing can lead to raised scar formation, characterized by rigid, thick scar tissue with associated symptoms of pain and pruritus. A key mechanical factor in raised scar development is excessive tension at the wound site. Recently, microneedles (MNs) have emerged as promising tools for scar management as they engage with scar tissue and provide them with mechanical off-loading from both internal and external sources. This review explores the mechanisms by which physical intervention of drug-free MNs alleviates mechanical tension on fibroblasts within scar tissue, thereby promoting tissue remodeling and reducing scar severity. Additionally, the role of MNs as an efficient cargo delivery system for the controlled and sustained release of a wide range of therapeutic agents into scar tissue is highlighted. By penetrating scar tissue, MNs facilitate controlled and sustained localized drug administration to modulate inflammation and fibroblastic cell growth. Finally, the remaining challenges and the future perspective of the field have been highlighted.

Microneedle patch with pure drug tips for delivery of liraglutide: pharmacokinetics in rats and minipigs

Transdermal delivery of peptide drugs is almost impossible with conventional penetration enhancers because of epidermal barrier function. Microneedle (MN) patches can bypass the epidermal barrier and have been developed for trans- and intradermal delivery of peptide drugs and vaccines. However, dissolving MN patches are limited by low drug loading capacities due to their small size and admixture of drug and water-soluble excipients. Furthermore, few in vivo pharmacokinetic studies, especially in large animals such as pigs, have been performed to assess post-application systemic drug exposure. Here, we developed a dissolving MN patch with pure liraglutide at the needle tips. The MN patch could load up to 2.21 ± 0.14 mg of liraglutide in a patch size of 0.9 cm2, which was nearly two orders of magnitude higher than that obtained with conventional MN patches of the same size. Raman imaging confirmed that liraglutide was localized at the MN tips. The MN had sufficient mechanical strength to penetrate the epidermis and could deliver up to 0.93 ± 0.04 mg of liraglutide into skin with a dosing variability of less than 6.8%. The MN patch delivery enabled faster absorption of liraglutide than that provided by subcutaneous (S.C.) injection, and achieved relative bioavailability of 69.8% and 46.3% compared to S.C. injection in rats and minipigs, respectively. The MN patch also exhibited similar patterns of anti-hyperglycemic effect in diabetic rats and individual variability in pharmacokinetic parameters as S.C. injection. The liraglutide MN application was well tolerated; no skin irritation was observed in minipigs except for mild erythema occurring within 4 h after once daily administration for 7 days at the same site. Our preclinical study suggests that MN patch with pure drug needle tips might offer a safe and effective alternative to S.C. injection for administration of liraglutide.

Intradermal implantation of methotrexate-loaded puerarin-gelatin hydrogel via bubble-generating microneedles for psoriasis treatment

Methotrexate (MTX) is a primary treatment for moderate to severe psoriasis, but conventional oral or subcutaneous delivery has limitations, including poor drug targeting, side effects, and low patient compliance. This study introduces implantable hydrogel microneedles (HMNs) made from photo-cross-linked gelatin methacryloyl (GelMA) and puerarin (Pue), a traditional Chinese medicine, for intradermal and sustained MTX delivery. The ratio of Pue to GelMA significantly influenced the morphology, mechanical strength, MTX release profiles, and degradation behavior of the HMNs. After insertion into the skin, the backing layer of the microneedles, which incorporates effervescent agents (NaHCO3 and citric acid), rapidly generates gas bubbles (CO₂) upon contact with skin interstitial fluid, facilitating the immediate separation of the HMNs from the backing and their implantation into skin tissue as MTX reservoirs. HMNs with 1.5 % w/v Pue and 20 % w/v GelMA achieved a 10-day MTX release in vivo. In vivo studies demonstrate that MTX-loaded Pue/GelMA HMNs significantly enhance therapeutic outcomes in alleviating psoriasis symptoms and downregulating psoriasis-associated cytokines due to the synergistic effects of MTX and Pue, outperforming oral administration, subcutaneous injection, and GelMA HMNs containing either Pue or MTX alone. This HMN patch offers great promise for improving psoriasis treatment and patient adherence.

Nano-enhanced immunity: A bibliometric analysis of nanoparticles in vaccine adjuvant research

This study analyzed the growth, collaboration, citation trends, and emerging topics in nanoparticle-based vaccine and adjuvant research (NVAR) from 1977 to 2023, using data from the Scopus database. The field showed a steady growth rate of 7.53% per year. Leading researchers Jaafari, M.R. and Alving, C.R. contributed significantly to the field, with 24.22% of publications and 38.92% of total citations coming from the United States. International collaboration was very strong, particularly between the US, UK, Germany, China, and France. Key research topics include nanoparticles, immunotherapy, COVID-19, and vaccines with a focus on SARS-CoV-2 and malaria. Emerging topics include vaccine adjuvants, mRNA, and neutralizing antibodies. This study emphasizes the importance of ongoing collaboration and interdisciplinary efforts to advance the field of NVAR.

A systematic review of microneedles technology in drug delivery through a bibliometric and patent overview

The transdermal drug delivery (TDD) route has gathered considerable attention for its potential to improve therapeutic efficacy while minimizing systemic side effects. Among transdermal technologies, microneedle (MN) devices have proven to be a promising approach that combines the advantages of traditional needle injections and non-invasive topical applications. This review provides a comprehensive analysis of progress in transdermal drug delivery systems (TDDS) via MN from 2000 to 2023, integrating bibliometric analysis and patent landscape to present a multi-faceted perspective on the evolution of this technology. The study identifies key trends, challenges, and opportunities in the research, implementation, and commercialization of MN tools through a systematic examination of scientific literature and an extensive investigation of global patent databases. The study of bibliometric trends reveals the leading experts, organizations, companies, and countries contributing to this field, collaboration networks, and the thematic evolution of research topics. The patent analysis offers insights into innovative trajectories, key players, and geographical distribution of intellectual property. This review resumes the latest advancements in MN devices and provides a strategic outlook that can guide future research directions, promote partnerships, and inform stakeholders involved in the development of TDDS.

Evolution of microneedle applicators for vaccination: the role of the latch applicator in optimizing dissolving microneedle-based immunization

INTRODUCTION

Dissolving microneedles (DMN) offer advantages in vaccine delivery, such as enhanced immunogenicity and simplified administration, by targeting immune-rich layers of the skin. However, these benefits require precise and consistent delivery, which poses practical challenges. To address this, specialized applicators are essential for ensuring the accurate deployment of DMNs, making this technology a viable alternative to traditional methods, particularly in low- and middle-income countries (LMICs), where healthcare infrastructure is limited.

AREAS COVERED

In this review, we examine the advancements in DMN-based vaccination and applicator design, focusing on their joint effort. These innovations have improved the precision and efficiency of DMN vaccine delivery. Complex and costly early-stage applicators have evolved into simpler and more cost-effective designs. We highlight these developments in this review, with the latch applicator as a key example of a feature that enhances vaccine delivery.

EXPERT OPINION

Although applicator development has advanced DMN-based vaccination toward practical use, challenges remain. Key areas for further optimization include user friendliness, cost, packaging volume, and wear time. Once optimized, DMN vaccination may become a highly effective and accessible tool for global immunization, supporting efforts to achieve worldwide vaccine equality.

Claes K, Blondeel P, Monstrey S, Dorpe JV, Van Vlierberghe S. Photo-crosslinkable polyester microneedles as sustained drug release systems toward hypertrophic scar treatment

Burn injuries can result in a significant inflammatory response, often leading to hypertrophic scarring (HTS). Local drug therapies e.g. corticoid injections are advised to treat HTS, although they are invasive, operator-dependent, extremely painful and do not permit extended drug release. Polymer-based microneedle (MN) arrays can offer a viable alternative to standard care, while allowing for direct, painless dermal drug delivery with tailorable drug release profile. In the current study, we synthesized photo-crosslinkable, acrylate-endcapped urethane-based poly(ε-caprolactone) (AUP-PCL) toward the fabrication of MNs. Physico-chemical characterization (1H-NMR, evaluation of swelling, gel fraction) of the developed polymer was performed and confirmed successful acrylation of PCL-diol. Subsequently, AUP-PCL, and commercially available PCL-based microneedle arrays were fabricated for comparative evaluation of the constructs. Hydrocortisone was chosen as model drug. To enhance the drug release efficiency of the MNs, Brij®35, a nonionic surfactant was exploited. The thermal properties of the MNs were evaluated via differential scanning calorimetry. Compression testing of the arrays confirmed that the MNs stay intact upon applying a load of 7 N, which correlates to the standard dermal insertion force of MNs. The drug release profile of the arrays was evaluated, suggesting that the developed PCL arrays can offer efficient drug delivery for up to two days, while the AUP-PCL arrays can provide a release up to three weeks. Finally, the insertion of MN arrays into skin samples was performed, followed by histological analysis demonstrating the AUP-PCL MNs outperforming the PCL arrays upon providing pyramidical-shaped perforations through the epidermal layer of the skin.

Current Status of Microneedle Array Technology for Therapeutic Delivery: From Bench to Clinic

In recent years, microneedle (MN) patches have emerged as an alternative technology for transdermal delivery of various drugs, therapeutics proteins, and vaccines. Therefore, there is an urgent need to understand the status of MN-based therapeutics. The article aims to illustrate the current status of microneedle array technology for therapeutic delivery through a comprehensive review. However, the PubMed search was performed to understand the MN's therapeutics delivery status. At the same time, the search shows the number no of publications on MN is increasing (63). The search was performed with the keywords "Coated microneedle," "Hollow microneedle," "Dissolvable microneedle," and "Hydrogel microneedle," which also shows increasing trend. Similarly, the article highlighted the application of different microneedle arrays for treating different diseases. The article also illustrated the current status of different phases of MN-based therapeutics clinical trials. It discusses the delivery of different therapeutic molecules, such as drug molecule delivery, using microneedle array technology. The approach mainly discusses the delivery of different therapeutic molecules. The leading pharmaceutical companies that produce the microneedle array for therapeutic purposes have also been discussed. Finally, we discussed the limitations and future prospects of this technology.

Reconnoitring signaling pathways and exploiting innovative approaches tailoring multifaceted therapies for skin cancer

Nowadays, skin cancer is widespread just like a varied malignant cancer which can cause serious health issues. Skin cancer, which encompasses malignant melanoma, basal cell carcinoma, and squamous cell carcinoma, is a prevalent form of cancer among humans. Due to its broad prevalence, financial burden, mortality rates, and cosmetic effects, it is a major public health issue. Skin cancer treatment involves surgery, chemotherapy, and radiation. Recently, personalized treatment in the fields of targeted therapies and precision medicine has been shown to diagnose early detection of every individual tumor by knowing their genetic and molecular characteristics. To target the molecular pathways responsible for tumor growth and reduce the damage to healthy tissue, new targeted therapies have emerged for melanoma, basal cell carcinoma, and squamous cell carcinoma. B-raf serine/threonine kinase (BRAF) and mitogen-activated protein kinase (MEK) inhibitors, immune checkpoint inhibitors, and precision medications have strong response rates to improve patient survival. Targeted therapeutics like nanocarriers have shown promising results by reducing skin irritation and protecting encapsulated therapeutics. These formulations have been shown to improve the transdermal permeability of anticancer drugs. The consideration of employing physical techniques to enhance the permeation of nanocarriers warrants attention to augment the dermal permeation of anticancer agents and facilitate targeted drug delivery within neoplastic cells. Targeted therapies face obstacles like resistance mechanisms and treatment strategy monitoring. Taken together, this review delves into the basic mechanisms of skin cancer, current treatment methods, drug resistance processes, and nano-based targeted techniques for cancer treatment. It will also delineate the challenges and perspectives in pre-clinical and clinical contexts.

Natural product-loaded lipid-based nanocarriers for skin cancer treatment: An overview

The skin is essential for body protection and regulating physiological processes. It is the largest organ and serves as the first-line barrier against UV radiation, harmful substances, and infections. Skin cancer is considered the most prevalent type of cancer worldwide, while melanoma skin cancer is having high mortality rates. Skin cancer, including melanoma and non-melanoma forms, is primarily caused by prolonged exposure to UV sunlight and pollution. Currently, treatments for skin cancer include surgery, chemotherapy, and radiotherapy. However, several factors hinder the effectiveness of these treatments, such as low efficacy, the necessity for high concentrations of active components to achieve a therapeutic effect, and poor drug permeation into the stratum corneum or lesions. Additionally, low bioavailability at the target site necessitates high doses, leading to skin irritation and further obstructing drug absorption through the stratum corneum. To overcome these challenges, recent research focuses on developing a medication delivery system based on nanotechnology as an alternative to this traditional approach. Nano-drug delivery systems have demonstrated great promise in treating skin cancer by providing a more effective means of delivering drugs with better stability and drug absorption. An overview of various lipid-based nanocarriers is given in this review article that are utilized to carry natural compounds to treat skin cancer.

Microneedle patches incorporating zinc-doped mesoporous silica nanoparticles loaded with betamethasone dipropionate for psoriasis treatment

Treating psoriasis presents a major clinical challenge because of the limitations associated with traditional topical glucocorticoid therapy. This study introduced a drug delivery system utilizing zinc-doped mesoporous silica nanoparticle (Zn-MSN) and microneedle (MN), designed to enhance drug utilization for prolonged anti-inflammatory and anti-itch effects. The MN system facilitated the transdermal delivery of betamethasone dipropionate (BD), allowing its slow release. The BD@Zn-MSN-MN system promoted the polarization of macrophages towards the anti-inflammatory M2 phenotype, achieving superior anti-inflammatory effects compared to the clinically used BD cream. Additionally, this study demonstrated that BD@Zn-MSN-MN could further alleviate itching in psoriasis-afflicted mice by decreasing the excitability of the transient receptor potential vanilloid V1 (TRPV1) ion channel positive neurons and reducing the release of calcitonin gene-related peptide (CGRP) in the dorsal root ganglion (DRG). These findings offer new insights and effective therapeutic options for the future design of transdermal drug delivery for psoriasis.

Novel long-acting treatment for schizophrenia based on paliperidone dissolving and implantable microarray patches

Schizophrenia is a severe mental disorder that affects millions of people worldwide. Several atypical antipsychotic medications, including paliperidone (PPD), has been developed and proven effective in treating it. To date, four PPD extended-release products have been launched commercially, providing up to six months of therapeutic effect with a single administration. However, the need for hospital injections by professional healthcare workers not only lead to poor patients' adherence, but also put additional pressure on the healthcare system. Therefore, three PPD microarray patch (PPD MAP) systems based on dissolving microneedle technology and implantable microneedle technology were developed in this work. The two dissolving microarray patch systems contained either PPD crude drug (PPD DMAP-CD) or PPD nanocrystal (PPD DMAP-NC) and the implantable MAP contained PPD crude drug (PPD IMAP). All three types of PPD MAPs showed excellent mechanical and insertion properties as they achieved over 256 µm insertion depth in skin model. In vitro release study showed that PPD released from IMAP in a much more sustained manner (up to 14 days) than PPD did from DMAPs (7 days), with only 20 % initial burst release from IMAP compared with 43-71 % from DMAPs. The MAP dissolution study showed that both DMAPs can be immediately dissolved within less than 3 min once inserted into the skin, indicating a faster action potential compared with IMAP. Ex vivo delivery study showed that 1.68 ± 0.23 mg, 1.39 ± 0.07 mg, and 1.18 ± 0.12 mg were delivered from DMAP-CD, DMAP-NC and IMAP, respectively, demonstrating that over 50 % and up to 70 % of PPD in the MAPs can be delivered into the skin. The IMAP offers most sustained release of PPD whereas DMAP-NC exhibits fastest PPD release (11.19 % vs 20.01 % into Franz cell receiver compartment over 24 h). This work presents a promising alternative for the sustained delivery of antipsychotic drugs, allowing for patient self-administration and extended release concurrently. Patients may potentially use both DMAP and IMAP to achieve a sustained release of PPD while also avoid having an initial therapeutic lag.

Development of 3D printed microneedles of varied needle geometries and lengths, designed to improve the dermal delivery of topically applied psoriasis treatments

The aim of this study was to investigate the impact of using microneedle patches in addition to topical therapy for the treatment of psoriasis. Using continuous liquid interface production (CLIP) 3D printing we manufactured round microneedle array patches (MAPs) with a diameter of 14 mm. Needle geometries were varied from square pyramidal, conical, and obelisk, with varied needle lengths of 400 µm, 600 µm, 800 µm, or 1000 µm. MAPs were characterized for force to fracture, skin penetration, skin damage, as well as their ability to deliver a novel oleogel-based corticosteroid (betamethasone dipropionate (BDP) formulation into ex-vivo porcine skin. We found that the obelisk shaped MAPs are more durable compared to the conical and square pyramidal-shaped MAPs. When the obelisk shaped MAPs were used in combination with the oleogel-based BDP formulation, the amount of BDP penetrating the skin was significantly increased with greater needle lengths.

Recent Developments in Using Microneedle Patch Technology as a More Efficient Drug Delivery System for Treating Skin Photoaging

Skin photoaging, resulting from prolonged exposure to ultraviolet (UV) radiation, is characterized by intricate biological changes involving oxidative damage and structural alterations. Despite an increasing demand for effective interventions, the current therapeutic options for treating skin photoaging are limited. We discovered through literature data search on PubMed that recent research has shifted its focus to the application of microneedle patches as an innovative approach to address this concern. Microneedle patches, serving as a novel transdermal delivery system, exhibit the potential to deliver bioactive substances such as cytokines, cellular vesicles, gene fragments and even alive algae to mitigate the effects of skin photoaging. This review aims to provide a comprehensive overview of recent advancements in research about utilizing microneedle patches for the treatment of skin photoaging and potential future directions in leveraging microneedle patches as clinical therapeutic agents for skin rejuvenation. Ultimately, we believe that microneedle patches have a broader application prospect in the fields of medical cosmetology and anti-photoaging.

Optimizing Solid Microneedle Design: A Comprehensive ML-Augmented DOE Approach

Microneedles (MNs), that is, a matrix of micrometer-scale needles, have diverse applications in drug delivery, skincare therapy, and health monitoring. MNs offer a minimally invasive alternative to hypodermic needles, characterized by rapid and painless procedures, cost-effective fabrication methods, and reduced tissue damage. This study explores four MN designs, cone-shaped, tapered cone-shaped, pyramidal with a square base, and pyramidal with a triangular-shaped base, and their optimization based on predefined criteria. The workflow encompasses three loading conditions: compressive load during insertion, critical buckling load, and bending loading resulting from incorrect insertion. Geometric parameters such as base radius/width, tip radius/width, height, and tapered angle tip influence the output criteria, namely, total deformation, critical buckling loads, factor of safety (FOS), and bending stress. The comprehensive framework employing a design of experiment approach within the ANSYS workbench toolbox establishes a mathematical model and a response surface fitting model. The resulting regression model, sensitivity chart, and response curve are used to create a multiobjective optimization problem that helps achieve an optimized MN geometrical design across the introduced four shapes, integrating machine learning (ML) techniques. This study contributes valuable insights into a potential ML-augmented optimization framework for MNs via needle designs to stay durable for various physiologically relevant conditions.

Multilayer patch functionalized microfibrillated cellulosic paper sensor for sweat glucose monitoring

Electrochemical analysis of glucose monitoring without painful blood collection provides a new noninvasive route for monitoring glucose levels. Thus, in this study, biobased cellulosic papers (methylated and phosphorylated one) based glucose monitoring sensor is developed. To achieve high hydrophilicity, microfibrillated cellulose (MFC) were functionalized using hexokinase mediated phosphorylation (-OH to -[Formula: see text]). The instinctive increased surface charge density from 36.2 ± 3.4 to 118.4 ± 1.2 µmol/g and decrease contact angle (45°-22°) confirms the increased hydrophilicity of paper. Furthermore, functionalized phos-MFC paper increase the capillary flow of sweat, required low quantity (1 µl) of sweat for accurate analysis of glucose level. Additionally, chemically induced methyl groups (-CH3) make the sensor more barrier to other chemicals. In addition, a multilayer patch design combined with sensor miniaturization was used to lead to an increase in the efficiency of the sweat collection and sensing processes. Besides, this paper sensor integrated with artificial transdermal drug delivery unit (agarose gel as skin) for monitoring glucose levels in sweat. The patch monitoring system increase the accuracy of sensing with fluctuation in sweat vol. (1-4 µl), temperature (20-70 °C), and pH (4.0-7.0). In addition, temperature dependency artificial transdermal delivery (within agarose gel) of drug metformin agrees the measurement accuracy of sensor, called "switch system" without any error. As a result, the reported MFC paper based multi-patch disposable sensing system provides a novel closed-loop solution for the noninvasive sweat-based management of diabetes mellitus.

Atorvastatin-Loaded Dissolving Microarray Patches for Long-Acting Microdepot Delivery: Comparison of Nanoparticle and Microparticle Drug Formulations

The increasing popularity of prolonged-release dosage forms, owing to their ability to provide continuous drug release after administration, has significantly improved patient compliance and overall quality of life. However, achieving prolonged release beyond 24 h frequently requires the use of invasive methods, including injections or implants, which may prove challenging for people suffering from needle phobia. This study introduces atorvastatin (ATR) microparticles (MPs) or nanocrystal (NCs) dissolving microarray patches (D-MAPs) as a noninvasive alternative for intradermal drug delivery over a two-week period for the management of hyperlipidemia. The MP-loaded D-MAPs exhibited an average drug loading of 5.15 ± 0.4 mg of ATR per patch, surpassing the 2.4 ± 0.11 mg/patch observed with NC-loaded D-MAPs. Skin deposition studies demonstrated the superior performance of MP D-MAPs, which delivered 2.0 ± 0.33 mg of ATR per 0.75 cm2 patch within 24 h, representing 38.76% of the initial amount of drug loaded. In contrast, NC D-MAPs delivered approximately 0.89 ± 0.12 mg of ATR per 0.75 cm2 patch at 24 h, equivalent to 38.42 ± 5.13% of the initial ATR loaded. Due to their favorable results, MP D-MAPs were chosen for an in vivo study using Sprague-Dawley rats. The findings demonstrated the capacity of D-MAPs to deliver and attain therapeutically relevant ATR concentrations (>20 ng/mL) for 14 days after a single 24-h application. This study is the first to successfully demonstrate the long-acting transdermal delivery of ATR using MP-loaded D-MAPs after a 24-h single-dose application. The innovative D-MAP system, particularly when loaded with MP, arises as a promising, minimally invasive, long-acting substitute for ATR delivery. This technology has the potential to improve patient compliance and therapeutic outcomes while also significantly advancing the field of transdermal drug delivery.

A novel shockwave-driven nanomotor composite microneedle transdermal delivery system for the localized treatment of osteoporosis: a basic science study

BACKGROUND

Clinical protocols in osteoporosis treatment could not meet the requirement of increasing local bone mineral density. A local delivery system was brought in to fix this dilemma. The high-energy extracorporeal shock wave (ESW) can travel into the deep tissues with little heat loss. Hence, ESW-driven nanoparticles could be used for local treatment of osteoporosis.

MATERIALS AND METHODS

An ESW-actuated nanomotor (NM) sealed into microneedles (MNs) (ESW-NM-MN) was constructed for localized osteoporosis protection. The NM was made of calcium phosphate nanoparticles with a high Young's modulus, which allows it to absorb ESW energy efficiently and convert it into kinetic energy for solid tissue penetration. Zoledronic (ZOL), as an alternative phosphorus source, forms the backbone of the NM (ZOL-NM), leading to bone targeting and ESW-mediated drug release.

RESULTS

After the ZOL-NM is sealed into hyaluronic acid (HA)-made microneedles, the soluble MN tips could break through the stratum corneum, injecting the ZOL-NM into the skin. As soon as the ESW was applied, the ZOL-NM would absorb the ESW energy to move from the outer layer of skin into the deep tissue and be fragmented to release ZOL and Ca 2+ for anti-osteoclastogenesis and pro-osteogenesis. In vivo , the ZOL-NM increases localized bone parameters and reduces fracture risk, indicating its potential value in osteoporotic healing and other biomedical fields.

CONCLUSION

The ESW-mediated transdermal delivery platform (ESW-NM-MN) could be used as a new strategy to improve local bone mineral density and protect local prone-fracture areas.

Pretreatment of microneedles enhances passive transdermal administration of pilocarpine and pilocarpine-induced sweat production in humans

The development of an effective transdermal drug delivery protocol to eccrine sweat glands is important for the advancement of research on the human sweating response. We investigated whether microneedle treatment prior to the application of pilocarpine, a hydrophilic and sudorific agent that does not induce sweating due to a limited percutaneous passive diffusion by skin application alone, augments sweat production. We applied three microneedle arrays to forearm skin sites simultaneously (n = 20). Upon removal of the microneedles, 1 % pilocarpine was applied to each site for 5-, 15-, and 30-min for the assessment of sweat gland function. In parallel, pilocarpine was administered by transdermal iontophoresis (5-min) at a separate site. Sweat rate was assessed continuously via the ventilated capsule technique. Pilocarpine augmented sweat rate at the 15- and 30-min periods as compared to the application at 5-min. The sweating responses induced by the 15- and 30-min application of pilocarpine were equivalent to ∼ 80 % of that measured at the iontophoretically treated sites. Notably, we observed a correlation in sweat rate between these two transdermal drug delivery methods. Altogether, our findings show that pre-treatment of microneedle arrays can enhance transdermal delivery efficiency of pilocarpine to human eccrine sweat glands.

Transdermal drug delivery of rizatriptan using microneedles array patch: preparation, characterization and ex-vivo/in-vivo study

Given the extensive first pass metabolism of rizatriptan in oral administration and its delayed absorption during a migraine attack as a result of gastric stasis, focus has been on transdermal delivery. The main purpose of this study is to prepare and assess transdermal formulation of rizatriptan, loaded on hydrogel microneedles delivery system, to avoid first pass metabolism and also improve its percutaneous permeation rate. Rizatriptan hydrogel microneedles were prepared using micromolding method and evaluated in terms of mechanical strength, encapsulation efficiency, permeation and in-vivo skin absorption. Different formulations of rizatriptan microneedles (F1-F5) were successfully prepared using different concentrations of carboxymethyl cellulose and gelatin type A. Rizatriptan hydrogel microneedles demonstrated favorable mechanical properties, including withstanding insertion forces, thereby enhancing its skin insertion ability. In permeation study, the percent cumulative drug released after 24 h ranged between 93.1-100% which means that microneedles were able to deliver the drug effectively. For in-vivo study, F3 formulation was selected due to its superior characteristics over other formulations as it exhibited the highest swelling capacity, and demonstrated favorable mechanical properties. Furthermore, F3 showcased the most controlled drug release over a 24-hour period. Relative bioavailability of F3 microneedles was 179.59% compared to oral administration based on the AUC0-24. The observed AUC0-24 in F3 microneedles was statistically significant and 1.80 times greater than that in oral administration. The higher rizatriptan level in the microneedle demonstrated adequate drug permeability through the rat skin, suggesting the potential of microneedles for enhanced therapeutic effectiveness.

Single-Administration Self-Boosting Microneedle Patch for The Treatment of Obesity

Glucagon-like peptide-1 receptor agonists (GLP-1 RAs) are one of the most effective treatments for obesity. The current therapy associated with repeated subcutaneous injections to maintain the drug therapeutic effect causes patient compliance issues and raises environmental concerns (due to sharp biohazard waste from disposed syringes/needles). Herein, we report a programmable scheduled release microneedles (PSR-MNs) system for delivering Semaglutide (a GLP-1 RA agent with a half-life of ~ 7 days) to manage and treat obesity. A single skin administration of a PSR-MNs patch (2 cm × 2 cm) which contains 4 programmable core-shell MNs patches (1 cm2 each, so-called pixels) enables the repeated release of Semaglutide every 7 days and sustains the drug efficacy for an unprecedented one-month period, simulating the effect of using four bolus injections spaced 7 days apart. Our PSR-MNs system provides an advanced injection-free platform to significantly enhance the current treatment of obesity with GLP-1RAs, addressing concerns related to pain, needle phobia, high cost and the need of medical facilities/personnel in traditional injections to administer the drug.

Clinical Safety and Efficacy Evaluation of a Dissolving Microneedle Patch Having Dual Anti-Wrinkle Effects With Safe and Long-Term Activities

BACKGROUND

Anti-aging products are widely used, but the desire for safe and more efficient anti-aging products continues to increase. Dissolving microneedle patches (MNPs) have provided a more efficient transdermal drug delivery solution. MNP is a promising candidate for developing better anti-aging products.

OBJECTIVE

To develop a more efficient anti-aging MNP product, we fabricated a dual anti-wrinkle microneedle patch (named DA-MNP) using droplet extension (DEN®) technology and evaluated its skin puncture ability, safety, and efficacy through clinical studies.

METHODS

A DA-MNP comprising hyaluronic acid (HA) polymer backbone, acetyl octapeptide-3, and L-ascorbic acid 2-glucoside and sodium cyclic lysophosphatidic acid was fabricated using DEN® technology. Placebo MNPs comprising only HA were also fabricated. Twenty-four healthy subjects were enrolled in this comparative clinical study. The DA-MNP or placebo MNP was separately applied to the left and right eyes of subjects for overnight. Assessments, including wrinkle improvement, trans-epidermal water loss (TEWL), eye lifting and adverse effects were evaluated at each scheduled visit day for 28 days.

RESULTS

The DA-MNP showed mechanical strength enough for puncturing the stratum corneum. Compared to placebo MNP group, the DA-MNP treated group showed an effective eye wrinkles improvement and better anti-aging of skin, with reduced TEWL, enhanced skin elasticity and lifting, and no adverse effects.

CONCLUSION

The present study demonstrated that the fabricated DA-MNP exhibited fast acting on deep wrinkles and enhanced anti-aging efficacy, with no skin safety concern. Thus, this DA-MNP may serve as a new transdermal delivery solution for skin wrinkling and aging.

Anti-ROS and NIR-II-Responsive Hyaluronic Acid Microneedle Loaded With Baicalin Nanoparticles for Treatment of Psoriasis

In this work, a natural medicine, baicalin, is designed for the treatment of psoriasis with the aid of hyaluronic acid (HA)-based MNs patches. This is also to improve the solubility of baicalin and increase its residence time in infected part, which is made into nanoparticles by complexation with humic acid and Eu2+. The baicalin nanoparticles loaded-MNs exhibit satisfactory rigidity, minimum injury, and controlled drug delivery. The anti-reactive oxygen species (anti-ROS) and anti-inflammatory action are verified by the effective scavenging oxygen and nitrogen radicals. In addition, the loading of baicalin nanoparticles brings remarkable photothermic effect to the MNs, enabling the device to release a controlled drug under near-infrared region II (NIR-II) laser irradiation. With the aid of NIR-II laser, the baicalin-mediated treatment of psoriasis is significantly improved by expediting radical scavenging and suppressing inflammation. The design of baicalin MNs provides a new idea for the treatment of chronic disease.

Customizable Fabrication of Photothermal Microneedles with Plasmonic Nanoparticles Using Low-Cost Stereolithography Three-Dimensional Printing

Photothermal microneedle (MN) arrays have the potential to improve the treatment of various skin conditions such as bacterial skin infections. However, the fabrication of photothermal MN arrays relies on time-consuming and potentially expensive microfabrication and molding techniques, which limits their size and translation to clinical application. Furthermore, the traditional mold-and-casting method is often limited in terms of the size customizability of the photothermal array. To overcome these challenges, we fabricated photothermal MN arrays directly via 3D-printing using plasmonic Ag/SiO2 (2 wt % SiO2) nanoaggregates dispersed in ultraviolet photocurable resin on a commercial low-cost liquid crystal display stereolithography printer. We successfully printed MN arrays in a single print with a translucent, nanoparticle-free support layer and photothermal MNs incorporating plasmonic nanoaggregates in a selective fashion. The photothermal MN arrays showed sufficient mechanical strength and heating efficiency to increase the intradermal temperature to clinically relevant temperatures. Finally, we explored the potential of photothermal MN arrays to improve antibacterial therapy by killing two bacterial species commonly found in skin infections. To the best of our knowledge, this is the first time describing the printing of photothermal MNs in a single step. The process introduced here allows for the translatable fabrication of photothermal MN arrays with customizable dimensions that can be applied to the treatment of various skin conditions such as bacterial infections.

Microneedle Patches-Integrated Transdermal Bioelectronics for Minimally Invasive Disease Theranostics

Wearable epidermal electronics with non- or minimally-invasive characteristics can collect, transduce, communicate, and interact with accessible physicochemical health indicators on the skin. However, due to the stratum corneum layer, rich information about body health is buried under the skin stratum corneum layer, for example, in the skin interstitial fluid. Microneedle patches are typically designed with arrays of special microsized needles of length within 1000 µm. Such characteristics potentially enable the access and sample of biomolecules under the skin or give therapeutical treatment painlessly and transdermally. Integrating microneedle patches with various electronics allows highly efficient transdermal bioelectronics, showing their great promise for biomedical and healthcare applications. This comprehensive review summarizes and highlights the recent progress on integrated transdermal bioelectronics based on microneedle patches. The design criteria and state-of-the-art fabrication techniques for such devices are initially discussed. Next, devices with different functions, including but not limited to health monitoring, drug delivery, and therapeutical treatment, are highlighted in detail. Finally, key issues associated with current technologies and future opportunities are elaborated to sort out the state of recent research, point out potential bottlenecks, and provide future research directions.

Chrono-tailored drug delivery systems: recent advances and future directions

Circadian rhythms influence a range of biological processes within the body, with the central clock or suprachiasmatic nucleus (SCN) in the brain synchronising peripheral clocks around the body. These clocks are regulated by external cues, the most influential being the light/dark cycle, in order to synchronise with the external day. Chrono-tailored or circadian drug delivery systems (DDS) aim to optimise drug delivery by releasing drugs at specific times of day to align with circadian rhythms within the body. Although this approach is still relatively new, it has the potential to enhance drug efficacy, minimise side effects, and improve patient compliance. Chrono-tailored DDS have been explored and implemented in various conditions, including asthma, hypertension, and cancer. This review aims to introduce the biology of circadian rhythms and provide an overview of the current research on chrono-tailored DDS, with a particular focus on immunological applications and vaccination. Finally, we draw on some of the key challenges which need to be overcome for chrono-tailored DDS before they can be translated to more widespread use in clinical practice.

Grooved Microneedle Patch Augments Adoptive T Cell Therapy Against Solid Tumors via Diverting Regulatory T Cells

The efficacy of adoptive T cell therapy (ACT) for the treatment of solid tumors remains challenging. In addition to the poor infiltration of effector T (Teff) cells limited by the physical barrier surrounding the solid tumor, another major obstacle is the extensive infiltration of regulatory T (Treg) cells, a major immunosuppressive immune cell subset, in the tumor microenvironment. Here, this work develops a grooved microneedle patch for augmenting ACT, aiming to simultaneously overcome physical and immunosuppressive barriers. The microneedles are engineered through an ice-templated method to generate the grooved structure for sufficient T-cell loading. In addition, with the surface modification of chemokine CCL22, the MNs could not only directly deliver tumor-specific T cells into solid tumors through physical penetration, but also specifically divert Treg cells from the tumor microenvironment to the surface of the microneedles via a cytokine concentration gradient, leading to an increase in the ratio of Teff cells/Treg cells in a mouse melanoma model. Consequently, this local delivery strategy of both T cell receptor T cells and chimeric antigen receptor T cells via the CCL22-modified grooved microneedles as a local niche could significantly enhance the antitumor efficacy and reduce the on-target off-tumor toxicity of ACT.

Integrating microneedles and sensing strategies for diagnostic and monitoring applications: The state of the art

Microneedles (MNs) offer minimally-invasive access to interstitial fluid (ISF) - a potent alternative to blood in terms of monitoring physiological analytes. This property is particularly advantageous for the painless detection and monitoring of drugs and biomolecules. However, the complexity of the skin environment, coupled with the inherent nature of the analytes being detected and the inherent physical properties of MNs, pose challenges when conducting physiological monitoring using this fluid. In this review, we discuss different sensing mechanisms and highlight advancements in monitoring different targets, with a particular focus on drug monitoring. We further list the current challenges facing the field and conclude by discussing aspects of MN design which serve to enhance their performance when monitoring different classes of analytes.

Ionic Liquid-Based Immunization Patch for the Transdermal Delivery of Antigens

Herein, we report a transdermal patch prepared using an ionic liquid-based solid in oil (IL-S/O) nanodispersion and a pressure-sensitive adhesive (PSA) to deliver the macromolecular antigenic protein, ovalbumin (OVA). The IL-S/O nanodispersion and a PSA were first mixed at an equal weight ratio, then coated onto a release liner, and covered with a support film. To evaluate the effect of the PSA, three types of PSAs, DURO-TAK 87-4098, DURO-TAK 87-4287, and DURO-TAK 87-235A, were used to obtain the corresponding IL-S/O patches SP-4098, SP-4287, and SP-235A, respectively. The prepared IL-S/O patches were characterized for surface morphology, viscoelasticity, and moisture content. In vitro skin penetration and in vivo immunization studies of the IL-S/O patches were performed using Yucatan micropig skin and the C57BL/6NJc1 mice model, respectively. The SP-4098 and SP-4287 delivered 5.49-fold and 5.47-fold higher amounts of drug compared with the aqueous formulation. Although both patches delivered a similar amount of drug, SP-4287 was not detached fully from the release liner after 30 days, indicating low stability. Mice immunized with the OVA-containing SP-4098 produced a 10-fold increase in anti-OVA IgG compared with those treated with an aqueous formulation. These findings suggested that the IL-S/O patch may be a good platform for the transdermal delivery of antigen molecules.

Lubricating Microneedles System with Multistage Sustained Drug Delivery for the Treatment of Osteoarthritis

Osteoarthritis (OA) is a typical joint degenerative disease that is prevalent worldwide and significantly affects the normal activities of patients. Traditional treatments using diclofenac (DCF) as an anti-inflammatory drug by oral administration and transdermal delivery have many inherent deficiencies. In this study, a lubricating microneedles (MNs) system for the treatment of osteoarthritis with multistage sustained drug delivery and great reduction in skin damage during MNs penetration is developed. The bilayer dissolvable MNs system, namely HA-DCF@PDMPC, is prepared by designating the composite material of hyaluronic acid (HA) and covalently conjugated drug compound (HA-DCF) as the MNs tips and then modifying the surface of MNs tips with a self-adhesive lubricating copolymer (PDMPC). The MNs system is designed to achieve sustained drug release of DCF via ester bond hydrolysis, physical diffusion from MNs tips, and breakthrough of lubrication coating. Additionally, skin damage is reduced due to the presence of the lubrication coating on the superficial surface. Therefore, the lubricating MNs with multistage sustained drug delivery show good compliance as a transdermal patch for OA treatment, which is validated from anti-inflammatory cell tests and therapeutic animal experiments, down-regulating the expression levels of pro-inflammatory factors and alleviating articular cartilage destruction.