Nanomedicine and advanced technologies for burns: Preventing infection and facilitating wound healing

Copper peroxide loaded gelatin/oxide dextran hydrogel with temperature and pH responsiveness for antibacterial and wound healing activity

Bacterial infection and tissue hypoxia always prevent wound healing, so multifunctional platforms with antimicrobial and oxygen-supplying functions were developed. However, they face many difficulties such as complex preparation and low oxygen release. To address this challenge, a copper peroxide loaded gelatin/oxide dextran hydrogel (CGO) was prepared. Surprisingly, CGO hydrogel as a wound dressing not only had good biocompatibility, injectivity, and mechanical properties, but also exhibited mild photothermal properties, temperature responsiveness, and pH responsiveness. After being applied to wounds infected with bacteria, CGO hydrogel released copper peroxide under near-infrared laser irradiation, which produced copper ions and hydrogen peroxide, combined with PTT to kill bacteria. After the bacteria were cleared from the wound and the pH of the wound was changed to be acidic, CGO hydrogel released copper peroxide via pH response. Copper ions and oxygen produced from copper peroxide accelerated wound healing by promoting angiogenesis. The multi-responsive and multi-mode treatment platform provided a potential strategy for treating bacteria-infected wounds.

Dynamic optical coherence elastography for skin burn assessment: A preliminary study on mice model

Skin burns that include tissue coagulation necrosis imply variations in stiffness. Dynamic phase-sensitive optical coherence elastography (OCE) is used to evaluate the stiffness of burned skin nondestructively in this paper. The homemade dynamic OCE was initially verified through tissue-mimicking phantom experiments regarding Rayleigh wave speed. After being burned with a series of temperatures and durations, the corresponding structure and stiffness variations of mice skin were demonstrated by histological images, optical coherence tomography B-scans, and OCE elastic wave speed maps. The results clearly displayed the variation in elastic properties and stiffness of the scab edge extending in the lateral direction. Statistical analysis revealed that murine skin burned at temperatures exceeding 100°C typically exhibited greater stiffness than skin burned at temperatures below 100°C. The dynamic OCE technique shows potential application for incorporating elasticity properties as a biomechanical extension module to diagnose skin burn injuries.

Investigation of a novel bilayered PACL/PVA electrospun nanofiber incorporated Chitosan-LL37 and Chitosan-VEGF nanoparticles as an advanced antibacterial cell growth-promoting wound dressing

Chronic wounds have become a growing concern as they can have a profound impact on individuals, potentially resulting in mortality. It is crucial to prevent and manage bacterial infections, particularly drug-resistant ones. Antimicrobial peptides, such as LL-37, can firmly eliminate pathogens. Additionally, the process of angiogenesis, facilitated by growth factors like VEGF, is essential for tissue repair and wound healing. To enhance the stability and bioavailability of therapeutic agents, targeted delivery strategies utilizing Chitosan-based carriers have been employed. Electrospun biopolymers in advanced wound dressings have revolutionized wound care by providing a more effective and efficient solution for promoting tissue regeneration and speeding up the healing process. The present investigation utilized Chitosan nanoparticles to encapsulate the recombinant LL37 peptide and VEGF. An in-depth investigation was carried out to analyze the biophysical and morphological traits of the LL37-CSNPs and VEGF-CSNPs. The first support layer consisted of PCL electrospun nanofiber, followed by the electrospinning of PVA/CsLL37, PVA/CsVEGF, and PVA/CsLL37/CsVEGF onto the PCL layer. An in vitro examination assessed the fabricated nanofibers' morphological, mechanical, and biological characteristics. The antimicrobial effects were tested on methicillin-resistant Staphylococcus aureus (MRSA). The in vivo experiments assessed the antibacterial and wound-healing capabilities of the nanofibers. The findings validated the continuous release of LL37 and VEGF. The composite material PCL/PVA/CsLL37/CsVEGF demonstrated potent bactericidal and antioxidant characteristics. The cytotoxic assay demonstrated the biocompatibility of the fabricated nano mats and their potential to accelerate fibroblast cell proliferation. The efficacy of PVA/CsLL37/CsVEGF in promoting wound healing was confirmed through an in vivo wound healing assay. Furthermore, the histological analysis provided evidence of faster epidermal formation and improved antibacterial activity in wounds covered with PVA/CsLL37/CsVEGF. Adding LL37 and VEGF to the composite material improves the immune response and promotes blood vessel formation, accelerating wound healing and decreasing inflammation.

Superior In Vivo Wound-Healing Activity of Biosynthesized Silver Nanoparticles with Nepeta cataria (Catnip) on Excision Wound Model in Rat

Silver nanoparticles were biosynthesized with Nepeta cataria plant extract. It was determined that the synthesized Nc-AgNPs gave a strong absorbance peak at 438 nm wavelength in the UV-vis spectrophotometer. SEM and TEM analyses of Nc-AgNPs showed that the synthesized nanoparticles had a spherical morphology. Based on XRD analysis, the average crystallite size of Nc-AgNPs was calculated at 15.74 nm. At the same time, EDS spectrum analysis exhibited dominant emission energy at 3 keV, indicative of Nc-AgNPs. Nc-AgNPs showed an inhibition zone of 12 nm in gram-negative Escherichia coli, 10 nm in gram-positive Enterococcus faecalis, and 11 nm in Staphylococcus aureus. Nc-AgNPs showed high antioxidant properties, with 63% at 5000 μg/mL. The wound-healing properties of Nc-AgNPs were evaluated in vivo in wound models created in a total of 20 Wistar albino male rats, divided into four groups. After 10 days of treatment, the highest wound closure rate was seen in the Nc-AgNP + Vaseline (Group IV) treatment group, at 94%. It was observed that Nc-AgNP + Vaseline nanoformulation significantly increased wound healing, similar to Silverdin®, and Vaseline alone supported healing but did not result in complete closure. Histopathological examination revealed an increase in mature Type 1 collagen in Group IV and positive control (Group II), with better collagen maturation in vehicle control (Group III) compared to negative control (Group I). Immunohistochemical analysis showed complete epithelialization in Group IV and Group II, with distinct cytokeratin expressions, while Group III exhibited mild expressions.

Perspective from developers: Tissue-engineered products for skin wound healing

Tissue-engineered products (TEPs) are at the forefront of developmental medicines, precisely where monoclonal antibodies and recombinant cytokines were 30 years ago. TEPs development for treating skin wounds has become a fast-growing field as it offers the potential to find novel therapeutic approaches for treating pathologies that currently have limited or no effective alternatives. This review aims to provide the reader with the process of translating an idea from the laboratory bench to clinical practice, specifically in the context of TEPs designing for skin wound healing. It encompasses historical perspectives, approved therapies, and offers a distinctive insight into the regulatory framework in Brazil. We explore the essential guidelines for quality testing, and nonclinical proof-of-concept considering the Brazilian Network of Experts in Advanced Therapies (RENETA) and International Standards and Guidelines (ICH e ISO). Adopting a multifaceted approach, our discussion incorporates scientific and industrial perspectives, addressing quality, biosafety, non-clinical viability, clinical trial and real-word data for pharmacovigilance demands. This comprehensive analysis presents a panoramic view of the development of skin TEPs, offering insights into the evolving landscape of this dynamic and promising field.

Stem Cell-Derived Nanovesicles Embedded in Dual-Layered Hydrogel for Programmed ROS Regulation and Comprehensive Tissue Regeneration in Burn Wound Healing

Burn wounds often bring high risks of delayed healing process and even death. Reactive oxygen species (ROS) play a crucial role in burn wound repair. However, the dynamic process in wound healing requires both the generation of ROS to inhibit bacteria and the subsequent reduction of ROS levels to initiate and promote tissue regeneration, which calls for a more intelligent ROS regulation dressing system. Hence, a dual-layered hydrogel (Dual-Gel) tailored to the process of burn wound repair is designed: the inner layer hydrogel (Gel 2) first responds to bacterial hyaluronidase (Hyal) to deliver aggregation-induced emission photosensitizer functionalized adipose-derived stem cell nanovesicles, which generate ROS upon light irradiation to eliminate bacteria; then the outer layer hydrogel (Gel 1) continuously starts a long-lasting consumption of excess ROS at the wound site to accelerate tissue regeneration. Simultaneously, the stem cell nanovesicles trapped in the burns wound also provide nutrients and mobilize neighboring tissues to thoroughly assist in inflammation regulation, cell proliferation, migration, and angiogenesis. In summary, this study develops an intelligent treatment approach on burn wounds by programmatically regulating ROS and facilitating comprehensive wound tissue repair.

A critical overview of challenging roles of medicinal plants in improvement of wound healing technology

PURPOSE

Chronic diseases often hinder the natural healing process, making wound infections a prevalent clinical concern. In severe cases, complications can arise, potentially leading to fatal outcomes. While allopathic treatments offer numerous options for wound repair and management, the enduring popularity of herbal medications may be attributed to their perceived minimal side effects. Hence, this review aims to investigate the potential of herbal remedies in efficiently treating wounds, presenting a promising alternative for consideration.

METHODS

A literature search was done including research, reviews, systematic literature review, meta-analysis, and clinical trials considered. Search engines such as Pubmed, Google Scholar, and Scopus were used while retrieving data. Keywords like Wound healing 'Wound healing and herbal combinations', 'Herbal wound dressing', Nanotechnology and Wound dressing were used.

RESULT

This review provides valuable insights into the role of natural products and technology-based formulations in the treatment of wound infections. It evaluates the use of herbal remedies as an effective approach. Various active principles from herbs, categorized as flavonoids, glycosides, saponins, and phenolic compounds, have shown effectiveness in promoting wound closure. A multitude of herbal remedies have demonstrated significant efficacy in wound management, offering an additional avenue for care. The review encompasses a total of 72 studies, involving 127 distinct herbs (excluding any common herbs shared between studies), primarily belonging to the families Asteraceae, Fabaceae, and Apiaceae. In research, rat models were predominantly utilized to assess wound healing activities. Furthermore, advancements in herbal-based formulations using nanotechnology-based wound dressing materials, such as nanofibers, nanoemulsions, nanofiber mats, polymeric fibers, and hydrogel-based microneedles, are underway. These innovations aim to enhance targeted drug delivery and expedite recovery. Several clinical-based experimental studies have already been documented, evaluating the efficacy of various natural products for wound care and management. This signifies a promising direction in the field of wound treatment.

CONCLUSION

In recent years, scientists have increasingly utilized evidence-based medicine and advanced scientific techniques to validate the efficacy of herbal medicines and delve into the underlying mechanisms of their actions. However, there remains a critical need for further research to thoroughly understand how isolated chemicals extracted from herbs contribute to the healing process of intricate wounds, which may have life-threatening consequences. This ongoing research endeavor holds great promise in not only advancing our understanding but also in the development of innovative formulations that expedite the recovery process.

Recent advances in molecular mechanisms of skin wound healing and its treatments

The skin, being a multifaceted organ, performs a pivotal function in the complicated wound-healing procedure, which encompasses the triggering of several cellular entities and signaling cascades. Aberrations in the typical healing process of wounds may result in atypical scar development and the establishment of a persistent condition, rendering patients more vulnerable to infections. Chronic burns and wounds have a detrimental effect on the overall quality of life of patients, resulting in higher levels of physical discomfort and socio-economic complexities. The occurrence and frequency of prolonged wounds are on the rise as a result of aging people, hence contributing to escalated expenditures within the healthcare system. The clinical evaluation and treatment of chronic wounds continue to pose challenges despite the advancement of different therapeutic approaches. This is mainly owing to the prolonged treatment duration and intricate processes involved in wound healing. Many conventional methods, such as the administration of growth factors, the use of wound dressings, and the application of skin grafts, are used to ease the process of wound healing across diverse wound types. Nevertheless, these therapeutic approaches may only be practical for some wounds, highlighting the need to advance alternative treatment modalities. Novel wound care technologies, such as nanotherapeutics, stem cell treatment, and 3D bioprinting, aim to improve therapeutic efficacy, prioritize skin regeneration, and minimize adverse effects. This review provides an updated overview of recent advancements in chronic wound healing and therapeutic management using innovative approaches.

S-Nitrosylated CuS Hybrid Hydrogel Patches with Robust Antibacterial and Repair-Promoting Activity for Infected Wound Healing

Development of wound dressing with robust antibacterial and repair-promoting activity has always been an urgent biomedical task during the past years. The therapeutic effect of current hydrogel dressings containing single bioactive agent like nanoparticle or gas is still unsatisfactory for the treatment of infected wound. Herein, a CuS/NO co-loaded hydrogel (CuS/NO Gel) is proposed, which is constructed by sequential polymerization, reduction, and S-nitrosylation of CuS hybrid hydrogel with disulfide bonds. These CuS/NO Gel patches show good mechanical stability, high photothermal activity and excellent biocompatibility. When being applied to treat infected wound, CuS/NO Gel can not only eliminate infection effectively by the synergistic effect of mild photothermal heating and boosted NO release in infection phase, but also promote vascularization and collagen deposition due to the synchronous supply of Cu ion nutrients and low concentration NO signaling molecules in wound repair phase. Compared to hydrogel dressings with individual active agent (CuS Gel or NO Gel), CuS/NO Gel exhibits better antibacterial and repair-promoting activity both in vitro and in vivo. Therefore, this CuS/NO Gel holds great promise in the future clinical treatment against infected wound.

Three-dimensional bioprinting of tissue-engineered skin: Biomaterials, fabrication techniques, challenging difficulties, and future directions: A review

As an emerging new manufacturing technology, Three-dimensional (3D) bioprinting provides the potential for the biomimetic construction of multifaceted and intricate architectures of functional integument, particularly functional biomimetic dermal structures inclusive of cutaneous appendages. Although the tissue-engineered skin with complete biological activity and physiological functions is still cannot be manufactured, it is believed that with the advances in matrix materials, molding process, and biotechnology, a new generation of physiologically active skin will be born in the future. In pursuit of furnishing readers and researchers involved in relevant research to have a systematic and comprehensive understanding of 3D printed tissue-engineered skin, this paper furnishes an exegesis on the prevailing research landscape, formidable obstacles, and forthcoming trajectories within the sphere of tissue-engineered skin, including: (1) the prevalent biomaterials (collagen, chitosan, agarose, alginate, etc.) routinely employed in tissue-engineered skin, and a discerning analysis and comparison of their respective merits, demerits, and inherent characteristics; (2) the underlying principles and distinguishing attributes of various current printing methodologies utilized in tissue-engineered skin fabrication; (3) the present research status and progression in the realm of tissue-engineered biomimetic skin; (4) meticulous scrutiny and summation of the extant research underpinning tissue-engineered skin inform the identification of prevailing challenges and issues.

Highly Active Frozen Nanovesicles Microneedles for Senile Wound Healing via Antibacteria, Immunotherapy, and Skin Regeneration

Senile wound healing risks a variety of health complications and makes both economic and psychological burdens on patients greatly. Poor activity of aged dermal fibroblasts (A-FBs) and local disordered immunoreaction in the deep dermis contribute to delayed wound healing. Therefore, the locally complex microenvironment in deep requires additional processing. Herein, a novel double-layer hyaluronic acid methacrylate (HAMA)/polyvinyl alcohol (PVA) microneedle patch (MNP) coated by young fibroblast-derived exosomes (Y-EXOs) (Y-EXOs@HAMA/PVA MNP) is presented for deep drug delivery, aged wound healing and immunoregulation. A spraying and freeze-drying method is applied for keeping the bioactivity of the nanovesicles. An ideal loading of Y-EXOs and enhanced strength for penetration have realized after circulation for times. The Y-EXOs@HAMA/PVA MNP shows an excellent influence on delayed wound healing of aged skin with active A-FBs, more deposition of collagen and less production of IL-17A compared with application of aged fibroblast-derived exosomes (A-EXOs). Moreover, the content microRNAs in Y-EXOs and A-EXOs are sequenced for further study. This study initiatively demonstrates that Y-EXOs have effective function on both anti-aging and anti-inflammation and Y-EXOs@HAMA/PVA MNP is expected as a novel strategy for deep drug delivery for promoting hard wound healing in aged skin in future clinical application.

Microneedle Patch for Transdermal Sequential Delivery of KGF-2 and aFGF to Enhance Burn Wound Therapy

Severe burn wounds usually destroy key cells' functions of the skin resulting in delayed re-epithelization and wound regeneration. Promoting key cells' activities is crucial for burn wound repair. It is well known that keratinocyte growth factor-2 (KGF-2) participates in the proliferation and morphogenesis of epithelial cells while acidic fibroblast growth factor (aFGF) is a key mediator for fibroblast and endothelial cell growth and differentiation. However, thick eschar and the harsh environment of a burn wound often decrease the delivery efficiency of fibroblast growth factor (FGF) to the wound site. Therefore, herein a novel microneedle patch for sequential transdermal delivery of KGF-2 and aFGF is fabricated to enhance burn wound therapy. aFGF is first loaded in the nanoparticle (NPaFGF) and then encapsulated NPaFGF with KGF-2 in the microneedle patch (KGF-2/NPaFGF@MN). The result shows that KGF-2/NPaFGF@MN can successfully get across the eschar and sequentially release KGF-2 and aFGF. Additional data demonstrated that KGF-2/NPaFGF@MN achieved a quicker wound closure rate with reduced necrotic tissues, faster re-epithelialization, enhanced collagen deposition, and increased neo-vascularization. Further evidence suggests that improved wound healing is regulated by significantly elevated expressions of hypoxia-inducible factor-1 alpha (HIF-1ɑ) and heat shock protein 90 (Hsp90) in burn wounds. All these data proved that KGF-2/NPaFGF@MN is an effective treatment for wound healing of burns.

Neddylation suppression by a macrophage membrane-coated nanoparticle promotes dual immunomodulatory repair of diabetic wounds

Oxidative stress, infection, and vasculopathy caused by hyperglycemia are the main barriers for the rapid repair of foot ulcers in patients with diabetes mellitus (DM). In recent times, the discovery of neddylation, a new type of post-translational modification, has been found to regulate various crucial biological processes including cell metabolism and the cell cycle. Nevertheless, its capacity to control the healing of wounds in diabetic patients remains unknown. This study shows that MLN49224, a compound that inhibits neddylation at low concentrations, enhances the healing of diabetic wounds by inhibiting the polarization of M1 macrophages and reducing the secretion of inflammatory factors. Moreover, it concurrently stimulates the growth, movement, and formation of blood vessel endothelial cells, leading to expedited healing of wounds in individuals with diabetes. The drug is loaded into biomimetic macrophage-membrane-coated PLGA nanoparticles (M-NPs/MLN4924). The membrane of macrophages shields nanoparticles from being eliminated in the reticuloendothelial system and counteracts the proinflammatory cytokines to alleviate inflammation in the surrounding area. The extended discharge of MLN4924 from M-NPs/MLN4924 stimulates the growth of endothelial cells and the formation of tubes, along with the polarization of macrophages towards the anti-inflammatory M2 phenotype. By loading M-NPs/MLN4924 into a hydrogel, the final formulation is able to meaningfully repair a diabetic wound, suggesting that M-NPs/MLN4924 is a promising engineered nanoplatform for tissue engineering.

A tough, antibacterial and antioxidant hydrogel dressing accelerates wound healing and suppresses hypertrophic scar formation in infected wounds

Wound management is an important issue that places enormous pressure on the physical and mental health of patients, especially in cases of infection, where the increased inflammatory response could lead to severe hypertrophic scars (HSs). In this study, a hydrogel dressing was developed by combining the high strength and toughness, swelling resistance, antibacterial and antioxidant capabilities. The hydrogel matrix was composed of a double network of polyvinyl alcohol (PVA) and agarose with excellent mechanical properties. Hyperbranched polylysine (HBPL), a highly effective antibacterial cationic polymer, and tannic acid (TA), a strong antioxidant molecule, were added to the hydrogel as functional components. Examination of antibacterial and antioxidant properties of the hydrogel confirmed the full play of the efficacy of HBPL and TA. In the in vivo studies of methicillin-resistant Staphylococcus aureus (MRSA) infection, the hydrogel had shown obvious promotion of wound healing, and more profoundly, significant suppression of scar formation. Due to the common raw materials and simple preparation methods, this hydrogel can be mass produced and used for accelerating wound healing while preventing HSs in infected wounds.

The Combination of Membrane Disruption and FtsZ Targeting by a Chemotherapeutic Hydrogel Synergistically Combats Pathogens Infections

The emergence of multidrug-resistant (MDR) bacteria poses a significant challenge to global health. Due to a shortage of antibiotics, alternative therapeutic strategies are urgently needed. Unfortunately, colistin, the last-resort antibiotic, has unavoidable nephrotoxicity and hepatotoxicity, and its single killing mechanism is prone to drug resistance. To address this challenge, a promising combinatorial approach that includes colistin, a membrane-disrupting antimicrobial agent, and chelerythrine (CHE), a FtsZ protein inhibitor is proposed. This approach significantly reduces antibiotic dose and development of resistance, leading to almost complete inactivation of MDR pathogens in vitro. To address solubility issues and ensure transport, the antimicrobial hydrogel system LNP-CHE-CST@hydrogel, which induced reactive oxygen species (ROS) and apoptosis-like cell death by targeting the FtsZ protein, is used. In an in vivo mouse skin infection model, the combination therapy effectively eliminated MDR bacteria within 24 h, as monitored by fluorescence tracking. The findings demonstrate a promising approach for developing multifunctional hydrogels to combat MDR bacterial infections.

The research status and prospects of nanomaterials in wound healing: A scientometric study

Nanotechnology and nanomaterials have swiftly influenced wound healing, propelling the development of wound-healing nanomaterials. Therefore, it's crucial to gather essential information about prominent researches in this domain. Moreover, identifying primary directions and related frontiers in wound healing and nanomaterials is paramount. This will enhance our comprehension of the current research landscape and foster progress in this field. Retrieved from the Web of Science core database, a total of 838 relevant studies published from 2013 to 2022 were analyzed through bibliometric visualization tools such as CiteSpace, VOSviewer, and Bibliometrics Online Analysis Platform. The annual study count has been rising steadily, primary contributors to this field include China, India, and the United States. The author with the highest output is Zangeneh, Akram, while Grumezescu, Alexandru Mihai garners the most citations. Chinese Academy of Sciences emerges as the leading institution, with Nanomaterials as the predominant journal. The keyword "antibacterial" signals prevailing and forthcoming trends in this domain. This study presents the first scientometric study and bibliometric visualization for wound healing-related nanomaterials, shedding light on research hotspots and trends. Over the course of the decade from 2013 to 2022, enthusiasm for nanomaterials in wound healing research has surged, auguring well for upcoming investigations.

A double-network porous hydrogel based on high internal phase emulsions as a vehicle for potassium sucrose octasulfate delivery accelerates diabetic wound healing

Diabetic wounds are a difficult medical challenge. Excessive secretion of matrix metalloproteinase-9 (MMP-9) in diabetic wounds further degrades the extracellular matrix and growth factors and causes severe vascular damage, which seriously hinders diabetic wound healing. To solve these issues, a double-network porous hydrogel composed of poly (methyl methacrylate-co-acrylamide) (p(MMA-co-AM)) and polyvinyl alcohol (PVA) was constructed by the high internal phase emulsion (HIPE) technique for the delivery of potassium sucrose octasulfate (PSO), a drug that can inhibit MMPs, increase angiogenesis and improve microcirculation. The hydrogel possessed a typical polyHIPE hierarchical microstructure with interconnected porous morphologies, high porosity, high specific surface area, excellent mechanical properties and suitable swelling properties. Meanwhile, the p(MMA-co-AM)/PVA@PSO hydrogel showed high drug-loading performance and effective PSO release. In addition, both in vitro and in vivo studies showed that the p(MMA-co-AM)/PVA@PSO hydrogel had good biocompatibility and significantly accelerated diabetic wound healing by inhibiting excessive MMP-9 in diabetic wounds, increasing growth factor secretion, improving vascularization, increasing collagen deposition and promoting re-epithelialization. Therefore, this study provided a reliable therapeutic strategy for diabetic wound healing, some theoretical basis and new insights for the rational design and preparation of wound hydrogel dressings with high porosity, high drug-loading performance and excellent mechanical properties.

Facile process ofHibiscusmucilage polymer formulation usingHibiscus rosa-sinensisleaves to treat second-degree burn and excision wounds

Mucilage is a sticky substance found in various plants and microorganisms and is made up of proteins and polysaccharides. Mucilage fromHibiscus rosa sinensisisis a complex polysaccharide traditionally used to treat different skin diseases. In our study, we fabricated mucilage polymer fromHibiscus rosa sinensisleaves and evaluated its potential application in second-degree burns and excision wounds. The physical properties of Hibiscus mucilage (HM) polymer were demonstrated by using Ultraviolet-visible absorption spectroscopy, x-ray diffraction, Fourier transform infrared spectroscopy, dynamic light scattering, Scanning electron microscopy, Brunauer-Emmett-Tellerand, Swelling ratio. The human cell lines WI-38, and HaCaT have been used forin-vitroexperiments like MTT, scratch wound, BrdU, ROS scavenging assays, and western blot analysis. The results of the MTT, scratch-wound, and BrdU assay indicated that the HM polymer is nontoxic in nature and also enhances both the properties of cellular migration and proliferation, respectively. On the other hand, the result of the ROS scavenging assay suggested that HM polymer enhances the antioxidant activity of cells while the western blot analysis designated that the HM polymer treatment caused downregulation of the pro-inflammatory cytokine IFN-γand upregulation of the pAkt (Serine 473) protein, and TGF-β1 signaling pathway. Therefore, allin-vitroexperimental studies recommended that HM polymer is biocompatible and has antioxidant and anti-inflammatory effects. In thein vivoexperiment, second-degree burns and excision wounds were created on the dorsal surface of male BALB/c mice. After the sixth day of HM polymer treatment have developed new tissue, hair follicles, blood vessels,α-SMA, and Collagen type-1 fiber on the burn and excision wound area while the 11th day of HM polymer treatment cured the wound area significantly. Therefore, it could be contemplated that HM polymer is a potential agent for treating different wounds in the near future.

Facile fabrication and biological investigations of metal oxides intercalated in kaolinite clay-based dressing material to improve wound healing ability in nursing care after post-operative period

The present investigation aims to design and development of hybrid zinc oxide (ZnO) and manganese dioxide (MnO2) nanoparticles (NPs) doped-biopolymer matrix-based cost-effective technique for the synthesis of biocompatible Kaolinite/Chitosan (Ka/CS) nanocomposites (NCs) could be used as agents for wound healing due to their efficiency and low toxicity. The crystallite size, phase purity and surface morphology of the synthesised NCs were investigated systemic analytical methods. The results revealed that the metal oxide nanocomposites presented that in rod-crystalline in shape and additionally exhibits that 20-30 nm in size. In vitro antibacterial analyses demonstrates that NCs have significantly improved bactericidal inhibition efficiency when compared to the bare hybrid NPs and polymeric components. The in vitro biocompatibility observation demonstrates that prepared hybrid-NPs encapsulated NCs have enhanced cell survival rate (>90 %), which was established by MTT assay and Live/Dead fluorescence assay methods at different incubation time. The DPPH assay was used to investigate the synergistic effects of prepared dressing materials increased antioxidant activity. Preliminary research indicates that these nanocomposites, ZnO/MnO2 incorporated and decorated with Ka/CS NCs, could be a significant promoter and potential candidate for use as a robust wound healing agent in post-operative nursing care.

Understanding the ideal wound healing mechanistic behavior using in silico modelling perspectives: A review

Complexity of the entire body precludes an accurate assessment of the specific contributions of tissues or cells during the healing process, which might be expensive and time consuming. Because of this, controlling the wound's size, depth, and dimensions may be challenging, and there is not yet an efficient and reliable chronic wound model representation. Furthermore, given the inherent challenges associated with conducting non-invasive in vivo investigations, it becomes peremptory to explore alternative methodologies for studying wound healing. In this context, biologically-realistic mathematical and computational models emerge as a valuable framework that can effectively address this need. Therefore, it might improve our approach to understanding the process at its core. This article will examines all facets of wound healing, including the kinds, pathways, and most current developments in wound treatment worldwide, particularly in silico modelling utilizing both mathematical and structure-based modelling techniques. It may be helpful to identify the crucial traits through the feedback loop of computer models and experimental investigations in order to build innovative therapies to cure wounds. Hence the effectiveness of personalised medicine and more targeted therapy in the healing of wounds may be enhanced by this interdisciplinary expertise.

NIR Plasmonic Nanozymes: Synergistic Enhancement Mechanism and Multi-Modal Anti-Infection Applications of MXene/MOFs

Nanozymes are considered as the promising antimicrobial agents due to the enzyme-like activity for chemo-dynamic therapy (CDT). However, it remains a challenge to develop novel nanozyme systems for achieving stimuli-responsive, and efficient nanozyme catalysis with multimodal synergistic enhancement. In this work, a near-infrared (NIR) plasmonic-enhanced nanozyme catalysis and photothermal performance for effective antimicrobial applications are proposed. A Ti3 C2 MXene/Fe-MOFs composite (MXM) with NIR plasmonic-enhanced CDT combined with photothermal properties is successfully developed by loading metal-organic framework (MOF) nanozymes onto Ti3 C2 MXene. The mechanism of NIR induced localized surface plasmon resonance (LSPR)-enhanced CDT and photothermal therapy (PTT) is well explained through activation energy (Ea ), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), fluorescence analysis experiments, and finite element simulation. It reveals that MXene nanosheets exhibit NIR plasmon exciters and generate hot electrons that can transfer to the surface of Fe-MOFs, promoting the Fenton reaction and enhances CDT. While the photothermal heating of MXene produced by LSPR can also boost the CDT of Fe-MOFs under NIR irradiation. Both in vitro and in vivo experimental results demonstrate that LSPR-induced MXM system has outstanding antimicrobial properties, can promote angiogenesis and collagen deposition, leading to the accelerated wound healing.

Instant Protection Spray for Anti-Infection and Accelerated Healing of Empyrosis

Distinct from common injuries, deep burns often require a chronic recovery cycle for healing and long-term antibiotic treatment to prevent infection. The rise of drug-resistant bacteria has caused antibiotics to no longer be perfect, and continuous drug use can easily lead to repeated infection and even death. Inspired by wild animals that chew plants to prevent wound infection, probiotic extracts with a structure similar to the tailspike of phage are obtained from Lactobacillus casei and combined with different flavones to design a series of nonantibiotic bactericides. These novel antibacterial agents are combined with a rapid gelation spray with a novel cross-angle layout to form an instant protection spray (IPS) and provide a physical and anti-infectious barrier for burns within 30 s. This IPS is able to sterilize 100.00% and 96.14% of multidrug-resistant Staphylococcus aureus (MRSA) in vitro and in vivo, respectively. In addition, it is found to effectively reduce inflammation in MRSA-infected burns in rats and to promote tissue healing.

Marine-derived polysaccharides and their therapeutic potential in wound healing application - A review

Polysaccharides originating from marine sources have been studied as potential material for use in wound dressings because of their desirable characteristics of biocompatibility, biodegradability, and low toxicity. Marine-derived polysaccharides used as wound dressing, provide several benefits such as promoting wound healing by providing a moist environment that facilitates cell migration and proliferation. They can also act as a barrier against external contaminants and provide a protective layer to prevent further damage to the wound. Research studies have shown that marine-derived polysaccharides can be used to develop different types of wound dressings such as hydrogels, films, and fibres. These dressings can be personalised to meet specific requirements based on the type and severity of the wound. For instance, hydrogels can be used for deep wounds to provide a moist environment, while films can be used for superficial wounds to provide a protective barrier. Additionally, these polysaccharides can be modified to improve their properties, such as enhancing their mechanical strength or increasing their ability to release bioactive molecules that can promote wound healing. Overall, marine-derived polysaccharides show great promise for developing effective and safe wound dressings for various wound types.

Study the Effect of Calendula officinalis Extract Loaded on Zinc Oxide Nanoparticle Cream in Burn Wound Healing

The skin, the body's largest organ, acts as a protective barrier against pathogens and environmental damage. Skin burns can result from heat, chemicals, friction, or electricity. Nanoscience has recently been utilized to create ointments and creams for burns. Zinc oxide nanoparticles are crucial due to their antimicrobial and antioxidant properties. In this study, a cream containing nanoparticles was loaded with calendula extract, and its ability to promote tissue healing was investigated in Wistar rats with skin burns. The zinc oxide nanoparticles were chemically synthesized and loaded with calendula extract. The morphology and physicochemical properties of the nanoparticles were confirmed by SEM, ZETA size, XRD, and FTIR assays. The MTT technique was employed to assess the cream's impact on fibroblast growth. The antimicrobial activity of the nanoparticles was investigated against Pseudomonas using the MIC method. Real-time PCR was used to determine the expression of the Bax and Bcl-2 genes in aeruginosa. The results showed that zinc oxide nanoparticles at high concentrations increased the proliferation of the fibroblast cells. Histopathological studies showed granulation and epithelialization of the tissue without any hemorrhage or tissue infection during the first days of treatment with this cream. The animal models treated with the cream showed an increase in Bcl-2 gene expression and a decrease in Bax expression. We concluded that zinc oxide nanoparticles loaded with calendula extract have a practical effect in healing burn wounds due to their unique antibacterial properties of zinc oxide nanoparticles and their anti-inflammatory and wound-healing effects. The synergistic effect of these two substances significantly improved the healing process. This newly developed cream can be introduced as a successful and viable treatment option in burn wounds.

Wip1 regulates wound healing by affecting activities of keratinocytes and endothelial cells through ATM-p53 and mTOR signaling

BACKGROUND

As a p53-regulated gene, Wip1 regulates proliferation, migration, apoptosis, and senescence of several type cells, but its biological functions in keratinocytes and endothelial cells which are involved wound healing are not fully understood. This study aims to reveal the function and underlying mechanism of Wip1 in wound healing using models of transgenic animal, keratinocytes, and endothelial cells.

METHODS

Using Wip1 knockout C57 BL/6 mice, we investigated effect of Wip1 deficiency on wound healing and angiogenesis; And using HaCaT and HUVEC as keratinocytes and endothelial cells, combined using primary keratinocytes from Wip1 knockout mice, we studied the effects of Wip1 knockdown/knockout or overexpression on proliferation, migration, and protein expressions of signaling components in ATM-p53 and mTOR pathway.

RESULTS

Wip1 deficiency in mice impaired the wound repair and endothelial angiogenesis, reduced the thickness of granulation tissue, and decreased the number of Ki67-positive cells and CD31 positive vessels in granulation tissue. Knockdown of Wip1 by shRNAs suppressed the proliferation and migration of HaCaT and HUVEC cells and induced notably apoptosis in the two cells. In western blot, Wip1 knockdown enriched p53 and ATM proteins, while decreased activated AKT, mTOR and activated S6 ribosomal protein (pS6) levels in HaCaT and HUVEC cells. Ectopic expression of Wip1 decreased the p53 and ATM proteins, while increased activated AKT, mTOR and pS6 levels in HaCaT and HUVEC cells. And in primary keratinocytes from mice tail skin, Wip1 knockout increased p53 and ATM, while decreased activated AKT, mTOR and pS6 protein levels.

CONCLUSION

Our study directly supports that Wip1 regulated skin wound healing possibly by affecting bioactivities including proliferation, migration and apoptosis of keratinocytes and endothelial cells at least through by modulating ATM-p53 and mTOR signaling.

Chitosan tamarind-based nanoparticles as a promising approach for topical application of curcumin intended for burn healing: in vitro and in vivo study

One of the most prevalent worldwide problems that affect all ages and genders is skin burn. The goal of our study was to assess the ability of curcumin nanoparticles to cure a rat burn model. Three formulations were selected after several tests were performed including investigation of encapsulation efficiency, particle size and zeta potential measurements. In vitro release was achieved on the three selected formulations. The effectiveness of the chosen formulation for healing was evaluated. The induced burn wound was smeared, starting just after excision, once daily with curcumin nanoparticles for 18 days. Our findings revealed that curcumin nanoparticles improved the burn healing potential by augmenting the skin regeneration indices as evidenced by enhancing the new production of hyaluronic acid and collagen type I. Additionally, curcumin nanoparticles could increase levels of vascular endothelial growth factor and alpha smooth muscle activity while drastically reducing the skin's tumour necrosis factor content, revealing a significant potential for burn healing process that is also reflected in the histopathological and immunohistochemical studies. Finally, our results demonstrated that curcumin nanoparticles revealed a significant potential for burn healing than curcumin alone due to its potent antimicrobial, antioxidant and anti-inflammatory properties.

An Overview of Recent Developments in the Management of Burn Injuries

According to the World Health Organization (WHO), around 11 million people suffer from burns every year, and 180,000 die from them. A burn is a condition in which heat, chemical substances, an electrical current or other factors cause tissue damage. Burns mainly affect the skin, but can also affect deeper tissues such as bones or muscles. When burned, the skin loses its main functions, such as protection from the external environment, pathogens, evaporation and heat loss. Depending on the stage of the burn, the patient's condition and the cause of the burn, we need to choose the most appropriate treatment. Personalization and multidisciplinary collaboration are key to the successful management of burn patients. In this comprehensive review, we have collected and discussed the available treatment options, focusing on recent advances in topical treatments, wound cleansing, dressings, skin grafting, nutrition, pain and scar tissue management.

Aptamer and DNAzyme-Functionalized Cu-MOF Hybrid Nanozymes for the Monitoring and Management of Bacteria-Infected Wounds

Metal-organic frameworks (MOFs) with peroxidase (POD)-like activity have great potential for combating drug-resistant bacterial infections. However, the use of POD-like activities is severely limited by low oxygen levels and high levels of glutathione (GSH) within the microenvironment of bacterial infection. Herein, G-quadruplex/hemin DNAzyme-aptamer probes and tannic acid-chelated Au nanoparticle (Au-TA)-decorated Cu-based MOF nanosheets (termed GATC) with triple-enzyme activities were developed for visual detection and efficient antibacterial therapy. First, the monometallic MOFs (Cu-ZIF) showed the best catalytic and loading capacity performance compared with the bimetallic MOFs (CoCu-ZIF and ZnCu-ZIF). Then, Cu-MOFs, Au-TA, and DNAzyme improve the POD-like activity to generate more hydroxyl radicals (•OH) to kill bacteria. GATC can bind to bacteria through aptamer recognition, increasing the bacterial surface contact area for efficient antibacterial activity. GATC can decompose H2O2 into O2 to alleviate hypoxia and improve the microenvironment due to its catalase (CAT)-like activity. In addition, GATC exhibited GSH peroxidase-like activity, which can avoid the loss of •OH and result in bacterial death more easily. Compared with previous studies, GATC exhibited extraordinary bactericidal ability at an extremely low dosage of 3 μg/mL against methicillin-resistant Staphylococcus aureus (MRSA). Notably, the GATC-catalyzed chromogenic reaction could accurately monitor the MRSA infection treatment process. Overall, this work could establish a therapeutic platform for the monitoring and management of bacteria-infected wounds.

Exploring the bioactivity of reduced graphene oxide and TiO2 nanocomposite for the regenerative medicinal applications

Millions of people globally suffer from issues related to chronic wounds due to infection, burn, obesity, and diabetes. Nanocomposite with antibacterial and anti-inflammatory properties is a promising material to promote wound healing. This investigation primarily aims to synthesize reduced graphene oxide and titanium dioxide (rGO@TiO2) nanocomposite for wound healing applications. The rGO@TiO2 nanocomposite was synthesized by the one-step hydrothermal technique, and the physicochemical characterization of synthesized nanocomposite was performed by X-ray diffraction, Fourier transforms infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, and dynamic light scattering. Further, the nanocomposite antibacterial, cytotoxicity, and wound-healing properties were analyzed by disc diffusion method, MTT assay, and in vitro scratch assay, respectively. Based on the TEM images, the average particle size of TiO2 nanoparticles was around 9.26 ± 1.83 nm. The characteristics peak of Ti-O-Ti bonds was observed between 500 and 850 cm-1 in the Fourier transforms infrared spectrum. The Raman spectrum of graphene oxide (GO) was obtained for bands D and G at 1354 cm-1 and at 1593 cm-1, respectively. This GO peak intensity was reduced in rGO, revealing the oxygen functional group reduction. Moreover, the rGO@TiO2 nanocomposite exhibited dose-dependent antibacterial properties against the positive and negative bacterium. The cytotoxicity for 5-100 µg/mL of rGO@TiO2 nanocomposite was above the half-maximal inhibitory concentration value. The in vitro scratch assay for rGO@TiO2 indicates that the nanocomposite promotes cell proliferation and migration. The nanocomposite recovered the wound within 48 h. The rGO@TiO2 nanocomposite shows potential materials for wound healing applications.

Engineered dermis loaded with confining forces promotes full-thickness wound healing by enhancing vascularisation and epithelialisation

Tissue-engineered skin is ideal for clinical wound repair. Restoration of skin tissue defects using tissue-engineered skin remains a challenge owing to insufficient vascularisation. In our previous study, we developed a 3D bioprinted model with confined force loading and demonstrated that the confined force can affect vascular branching, which is regulated by the YAP signalling pathway. The mechanical properties of the model must be optimised to suture the wound edges. In this study, we explored the ability of a GelMA-HAMA-fibrin scaffold to support the confined forces created by 3D bioprinting and promote vascularisation and wound healing. The shape of the GelMA-HAMA-fibrin scaffold containing 3% GelMA was affected by the confined forces produced by the embedded cells. The GelMA-HAMA-fibrin scaffold was easy to print, had optimal mechanical properties, and was biocompatible. The constructs were successfully sutured together after 14 d of culture. Scaffolds seeded with cells were transplanted into skin tissue defects in nude mice, demonstrating that the cell-seeded GelMA-HAMA-fibrin scaffold, under confined force loading, promoted neovascularisation and wound restoration by enhancing blood vessel connections, creating a patterned surface, growth factors, and collagen deposition. These results provide further insights into the production of hydrogel composite materials as tissue-engineered scaffolds under an internal mechanical load that can enhance vascularisation and offer new treatment methods for wound healing. STATEMENT OF SIGNIFICANCE: Tissue-engineered skin is ideal for use in clinical wound repair. However, treatment of tissue defects using synthetic scaffolds remains challenging, mainly due to slow and insufficient vascularization. Our previous study developed a 3D bioprinted model with confined force loading, and demonstrated that confined force can affect vascular branching regulated by the YAP signal pathway. The mechanical properties of the construct need to be optimized for suturing to the edges of wounds. Here, we investigated the ability of a GelMA-HAMA-fibrin scaffold to support the confined forces created by 3D bioprinting and promote vascularization in vitro and wound healing in vivo. Our findings provide new insight into the development of degradable macroporous composite materials with mechanical stimulation as tissue-engineered scaffolds with enhanced vascularization, and also provide new treatment options for wound healing.

Eobania vermiculata whole-body muscle extract-loaded chitosan nanoparticles enhanced skin regeneration and decreased pro-inflammatory cytokines in vivo

BACKGROUND

Usually, wounds recover in four to six weeks. Wounds that take longer time than this to heal are referred to as chronic wounds. Impaired healing can be caused by several circumstances like hypoxia, microbial colonization, deficiency of blood flow, reperfusion damage, abnormal cellular reaction and deficiencies in collagen production. Treatment of wounds can be enhanced through systemic injection of the antibacterial drugs and/or other topical applications of medications. However, there are a number of disadvantages to these techniques, including the limited or insufficient medication penetration into the underlying skin tissue and the development of bacterial resistance with repeated antibiotic treatment. One of the more recent treatment options may involve using nanotherapeutics in combination with naturally occurring biological components, such as snail extracts (SE). In this investigation, chitosan nanoparticles (CS NPs) were loaded with an Eobania vermiculata whole-body muscle extract. The safety of the synthesized NPs was investigated in vitro to determine if these NPs might be utilized to treat full-skin induced wounds in vivo.

RESULTS

SEM and TEM images showed uniformly distributed, spherical, smooth prepared CS NPs and snail extract-loaded chitosan nanoparticles (SE-CS NPs) with size ranges of 76-81 and 91-95 nm, respectively. The zeta potential of the synthesized SE-CS NPs was - 24.5 mV, while that of the CS NPs was 25 mV. SE-CS NPs showed a remarkable, in vitro, antioxidant, anti-inflammatory and antimicrobial activities. Successfully, SE-CS NPs (50 mg/kg) reduced the oxidative stress marker (malondialdehyde), reduced inflammation, increased the levels of the antioxidant enzymes (superoxide dismutase and glutathione), and assisted the healing of induced wounds. SE-CS NPs (50 mg/kg) can be recommended to treat induced wounds safely. SE was composed of a collection of several wound healing bioactive components [fatty acids, amino acids, minerals and vitamins) that were loaded on CS NPs.

CONCLUSIONS

The nanostructure enabled bioactive SE components to pass through cell membranes and exhibit their antioxidant and anti-inflammatory actions, accelerating the healing process of wounds. Finally, it is advised to treat rats' wounds with SE-CS NPs.

Nanomedicine-fortified cosmeceutical serums for the mitigation of psoriasis and acne

Cosmetics have a long history of use for regenerative and therapeutic purposes that are appealing to both genders. The untapped potential of nanotechnology in cosmeceuticals promises enhanced efficacy and addresses the issues associated with conventional cosmetics. In the field of cosmetics, the incorporation of nanomedicine using various nanocarriers such as vesicle and solid lipid nanoparticles significantly enhances product effectiveness and promotes satisfaction, especially in tackling prevalent skin diseases. Moreover, vesicle-fortified serum is known for high skin absorption with the capacity to incorporate and deliver various therapeutics. Additionally, nano-embedded serum-based cosmeceuticals hold promise for treating various skin disorders, including acne and psoriasis, heralding potential therapeutic advancements. This review explores diverse nanotechnology-based approaches for delivering cosmetics with maximum benefits.

A phellinus igniarius polysaccharide/chitosan-arginine hydrogel for promoting diabetic wound healing

Inadequate angiogenesis and inflammation at the wound site have always been a major threat to skin wounds, especially for diabetic wounds that are difficult to heal. Therefore, hydrogel dressings with angiogenesis and antibacterial properties are very necessary in practical applications. This study reported a hydrogel (PCA) based on L-arginine conjugated chitosan (CA) and aldehyde functionalized polysaccharides of Phellinus igniarius (OPPI) as an antibacterial and pro-angiogenesis dressing for wound repair in diabetes for the first time. and discussed its possible mechanism for promoting wound healing. The results showed that PCA had good antioxidant, antibacterial, biological safety and other characteristics, and effectively promoted the healing course of diabetic wound model. In detail, the H&E and Masson staining results showed that PCA promoted normal epithelial formation and collagen deposition. The Western blot results confirmed that PCA decreased the inflammation by inhibiting the IKBα/NF-κB signaling pathway and enhanced angiogenesis by adjusting the level of HIF-1α. In conclusion, PCA is a promising candidate for promoting wound healing in diabetes. Graphic abstract.

Waste to Wealth: Near-Infrared/pH Dual-Responsive Copper-Humic Acid Hydrogel Films for Bacteria-Infected Cutaneous Wound Healing

The clinical applications of currently used photosensitizers are limited by high costs, inconvenient preparation, suboptimal biodegradability, and a lack of biological activity. Humic acids (HAs) show photothermal activity and can be used as a photosensitizer for photothermal therapy. In the presence of various functional groups, HAs are endowed with anti-inflammatory and antioxidant activities. The solubility of HAs is dependent on the pH value, which is soluble in neutral to alkaline conditions and undergoes a conformational change to a coiled and compact structure in acidic conditions. Additionally, Cu2+ is an emerging therapeutic agent for cutaneous wounds and can be chelated by HAs to form complexes. In this study, we explore the ability of HAs to modulate the inflammatory response, particularly macrophage polarization, and the potential underlying mechanism. We fabricate a near-infrared (NIR)/pH dual-responsive Cu-HAs nanoparticle (NP)-based poly(vinyl alcohol) (PVA) hydrogel film loaded with SEW2871 (SEW), a macrophage recruitment agent, to treat bacteria-infected cutaneous wounds. The results show that HAs could promote M2 macrophage polarization in a dose-dependent manner. The Cu-HAs NPs successfully eradicated bacterial infection through NIR-induced local hyperthermia. This PVA@Cu-HAs NPs@SEW hydrogel film improves tissue regeneration by promoting M2 macrophage polarization, alleviating oxidative stress, enhancing angiogenesis, and facilitating collagen deposition. These findings highlight the therapeutic potential of PVA@Cu-HAs NPs@SEW hydrogel film for the treatment of bacterially infected cutaneous wound healing.

Effect of combination of photobiomodulation 904 nm superpulsed laser therapy and Hippophae rhamnoides L. on third-degree burn wound healing

BACKGROUND

Burn is a traumatic injury and aesthetic scarless repair poses a great challenge in area of cosmetic dermatology. Focus on multimode therapeutic strategies to promote healing of burns by regulating various stages of healing is warranted. Photobiomodulation therapy (PBMT), a non-invasive modality grabs the attention to repair impaired wounds. Seabuckthorn extract (SBTL-ALE) is known to possess antioxidant, anti-inflammation, and tissue-repair abilities. Current study aims to assess the effect of combination treatment of PBM 904 nm superpulsed laser and SBTL-ALE (2.5%) on repair of third-degree burn in rats.

METHODS

Rats were randomized into five groups: uninjured, control, SBTL-ALE, 904 nm PBMT, and combination. A transdermal burn wound was induced on the dorsal side of rats of all groups except the uninjured group and respective treatment was applied for 7 days postwounding.

RESULTS

Dual treatment increased wound area contraction compared to control and either treatment alone. Immunohistochemical analyses exhibited increased angiogenesis, dermal hydration, collagen synthesis, and maintained redox homeostasis as evidenced by enhanced expression (p < 0.05) of CD31, aquaporin3, collagen type 3, Nrf2, and HO1 in combination group compared with control. Conversely, pro-inflammatory and oxidative stress markers exhibited reduced (p < 0.05) TNF-α, IL-6, IL-1β, NOS-2, ROS levels, and increased catalase activity in combined treatment. Furthermore, energy metabolizing enzymes viz. citrate synthase, CCO, and ATP contents were substantially (p < 0.05) increased, and LDH activity was reduced in the combination group.

CONCLUSIONS

Dual treatment (PBMT + SBTL-ALE) prominently accelerates third-degree burn wound healing in rats, which could pave the path for multimode therapeutic strategies for the management of burns and dermal cosmetic care.

Nano-based techniques: A revolutionary approach to prevent covid-19 and enhancing human awareness

In every century of history, there are many new diseases emerged, which are not even cured by many developed countries. Today, despite of scientific development, new deadly pandemic diseases are caused by microorganisms. Hygiene is considered to be one of the best methods of avoiding such communicable diseases, especially viral diseases. Illness caused by SARS-CoV-2 was termed COVID-19 by the WHO, the acronym derived from "coronavirus disease 2019. The globe is living in the worst epidemic era, with the highest infection and mortality rate owing to COVID-19 reaching 6.89% (data up to March 2023). In recent years, nano biotechnology has become a promising and visible field of nanotechnology. Interestingly, nanotechnology is being used to cure many ailments and it has revolutionized many aspects of our lives. Several COVID-19 diagnostic approaches based on nanomaterial have been developed. The various metal NPs, it is highly anticipated that could be viable and economical alternatives for treating drug resistant in many deadly pandemic diseases in near future. This review focuses on an overview of nanotechnology's increasing involvement in the diagnosis, prevention, and therapy of COVID-19, also this review provides readers with an awareness and knowledge of importance of hygiene.

Baicalin, silver titanate, Bletilla striata polysaccharide and carboxymethyl chitosan in a porous sponge dressing for burn wound healing

OBJECTIVE

This study tests the efficacy of Bletilla striata polysaccharide (BSP), carboxymethyl chitosan (CMC), baicalin (BA) and silver titanate (ST) in a wound dressings to fight infection, promote healing and provide superior biocompatibility.

METHODS

The antibacterial activity of BA and ST was evaluated in vitro using the inhibition zone method. BA/ST/BSP/CMC porous sponge dressings were prepared and characterized. The biocompatibility of BA/ST/BSP/CMC was assessed using the cell counting kit-8 assay. The therapeutic effect of BA/ST/BSP/CMC was further investigated using the dorsal skin burn model in Sprague-Dawley rats.

RESULTS

The wound dressing had good antibacterial activity against Escherichia coli and Staphylococcus aureus through BA and ST, while the combination of BSP and CMC played an important role in promoting wound healing. The BA/ST/BSP/CMC porous sponge dressings were prepared using a freeze-drying method with the concentrations of BA and ST at 20 and 0.83 mg/mL, respectively, and the optimal ratio of 5% BSP to 4% CMC was 1:3. The average porosity, water absorption and air permeability of BA/ST/BSP/CMC porous sponge dressings were measured to be 90.43%, 746.1% and 66.60%, respectively. After treatment for 3 and 7 days, the healing rates of the BA/ST/BSP/CMC group and BA/BSP/CMC group were significantly higher than those of the normal saline (NS) group and silver sulfadiazine (SSD) group (P < 0.05). Interleukin-1β expression in the BA/ST/BSP/CMC group at 1 and 3 days was significantly lower than that in the other three groups (P < 0.05). After being treated for 3 days, vascular endothelial growth factor expression in the BA/BSP/CMC group and BA/ST/BSP/CMC group was significantly higher than that in the NS group and SSD group (P < 0.05). Inspection of histological sections showed that the BA/ST/BSP/CMC group and BA/BSP/CMC group began to develop scabbing and peeling of damaged skin after 3 days of treatment, indicating accelerated healing relative to the NS group and SSD group.

CONCLUSION

The optimized concentration of BA/ST/BSP/CMC dressing was as follows: 6 mg BSP, 14.4 mg CMC, 0.5 mg ST and 12 mg BA. The BA/ST/BSP/CMC dressing, containing antibacterial constituents, was non-cytotoxic and effective in accelerating the healing of burn wounds, making it a promising candidate for wound healing. Please cite this article as: Gong YR, Zhang C, Xiang X, Wang ZB, Wang YQ, Su YH, Zhang HQ. Baicalin, silver titanate, Bletilla striata polysaccharide and carboxymethyl chitosan in a porous sponge dressing for burn wound healing. J Integr Med. 2023; 21(5): 487-495.

Research on the biological mechanism and potential application of CEMIP

Cell migration-inducing protein (CEMIP), also known as KIAA1199 and hyaluronan-binding protein involved in hyaluronan depolymerization, is a new member of the hyaluronidase family that degrades hyaluronic acid (HA) and remodels the extracellular matrix. In recent years, some studies have reported that CEMIP can promote the proliferation, invasion, and adhesion of various tumor cells and can play an important role in bacterial infection and arthritis. This review focuses on the pathological mechanism of CEMIP in a variety of diseases and expounds the function of CEMIP from the aspects of inhibiting cell apoptosis, promoting HA degradation, inducing inflammatory responses and related phosphorylation, adjusting cellular microenvironment, and regulating tissue fibrosis. The diagnosis and treatment strategies targeting CEMIP are also summarized. The various functions of CEMIP show its great potential application value.

Progress in Pluronic F127 Derivatives for Application in Wound Healing and Repair

Pluronic F127 hydrogel biomaterial has garnered considerable attention in wound healing and repair due to its remarkable properties including temperature sensitivity, injectability, biodegradability, and maintain a moist wound environment. This comprehensive review provides an in-depth exploration of the recent advancements in Pluronic F127-derived hydrogels, such as F127-CHO, F127-NH2, and F127-DA, focusing on their applications in the treatment of various types of wounds, ranging from burns and acute wounds to infected wounds, diabetic wounds, cutaneous tumor wounds, and uterine scars. Furthermore, the review meticulously examines the intricate interaction mechanisms employed by these hydrogels within the wound microenvironment. By elucidating the underlying mechanisms, discussing the strengths and weaknesses of Pluronic F127, analyzing the current state of wound healing development, and expanding on the trend of targeting mitochondria and cells with F127 as a nanomaterial. The review enhances our understanding of the therapeutic effects of these hydrogels aims to foster the development of effective and safe wound-healing modalities. The valuable insights provided this review have the potential to inspire novel ideas for clinical treatment and facilitate the advancement of innovative wound management approaches.

Multidrug-Resistant Pathogens in Burn Wound, Prevention, Diagnosis, and Therapeutic Approaches (Conventional Antimicrobials and Nanoparticles)

Multidrug-resistant pathogens are one of the common causes of death in burn patients and have a high risk of nosocomial infections, especially pneumonia, urinary tract infections, and cellulitis. The role of prolonged hospitalization and empirical antibiotics administration in developing multidrug-resistant pathogens is undeniable. In the early days of admitting burn patients, Gram-positive bacteria were the dominant isolates with a more sensitive antibiotic pattern. However, the emergence of Gram-negative bacteria that are more resistant later occurs. Trustworthy guideline administration in burn wards is one of the strategies to prevent multidrug-resistant pathogens. Also, a multidisciplinary therapeutic approach is an effective way to avoid antibiotic resistance that involves infectious disease specialists, pharmacists, and burn surgeons. However, the emerging resistance to conventional antimicrobial approaches (such as systemic antibiotic exposure, traditional wound dressing, and topical antibiotic ointments) among burn patients has challenged the treatment of multidrug-resistant infections, and using nanoparticles is a suitable alternative. In this review article, we will discuss different aspects of multidrug-resistant pathogens in burn wounds, emphasizing the full role of these pathogens in burn wounds and discussing the application of nanotechnology in dealing with them. Also, some advances in various types of nanomaterials, including metallic nanoparticles, liposomes, hydrogels, carbon quantum dots, and solid lipid nanoparticles in burn wound healing, will be explained.

Anti-Biofilm Enzymes-Assisted Antibiotic Therapy against Burn Wound Infection by Pseudomonas aeruginosa

Pseudomonas aeruginosa can form biofilms at the site of burn wound, leading to infection and the failure of treatment regimens. The previous in vitro study demonstrated that a combination of the quorum-quenching enzyme AidHA147G and the extracellular matrix hydrolase PslG was effective in inhibiting biofilm and promoting antibiotic synergy. The aim of the present study was to evaluate the efficacy of this combination of enzymes in conjunction with tobramycin in treating burn wound infected with P. aeruginosa. The results showed that this treatment was effective in quorum-quenching and biofilm inhibition on infected wounds. Compared with the tobramycin treatment only, simultaneous treatment with the enzymes and antibiotics significantly reduced the severity of tissue damage, decreased the bacterial load, and reduced the expression of the inflammatory indicators myeloperoxidase (MPO) and malondialdehyde (MDA). Topical application of the enzymes also reduced the bacterial load and inflammation to some extent. These results indicate that the combined-enzyme approach is a potentially effective treatment for P. aeruginosa biofilm infections of burn wounds.

Immunomodulatory Nanosystems: Advanced Delivery Tools for Treating Chronic Wounds

The increasingly aging society led to a rise in the prevalence of chronic wounds (CWs), posing a significant burden to public health on a global scale. One of the key features of CWs is the presence of a maladjusted immune microenvironment characterized by persistent and excessive (hyper)inflammation. A variety of immunomodulatory therapies have been proposed to address this condition. Yet, to date, current delivery systems for immunomodulatory therapy remain inadequate and lack efficiency. This highlights the need for new therapeutic delivery systems, such as nanosystems, to manage the pathological inflammatory imbalance and, ultimately, improve the treatment outcomes of CWs. While a plethora of immunomodulatory nanosystems modifying the immune microenvironment of CWs have shown promising therapeutic effects, the literature on the intersection of immunomodulatory nanosystems and CWs remains relatively scarce. Therefore, this review aims to provide a comprehensive overview of the pathogenesis and characteristics of the immune microenvironment in CWs, discuss important advancements in our understanding of CW healing, and delineate the versatility and applicability of immunomodulatory nanosystems-based therapies in the therapeutic management of CWs. In addition, we herein also shed light on the main challenges and future perspectives in this rapidly evolving research field.

Pulmonary Fibrosis: Unveiling the Pathogenesis, Exploring Therapeutic Targets, and Advancements in Drug Delivery Strategies

Idiopathic pulmonary fibrosis (IPF) is an ailment with no cure and a very high rate of progression that ultimately leads to death. The exact reason for this disease is still not acknowledged. Many underlying mechanisms of wound healing and various types of stimuli that trigger the pathogenesis of IPF continue to be intensively explored. The exact therapy for the reversal of this disease is not yet known and is constantly in progress. Existing treatments only slow down the process or mitigate the symptoms to enhance the patient's healthcare system. The only two Food and Drug Administration-approved oral medications include pirfenidone and nintedanib whose high dose and systemic circulation can have side effects to a greater extent. Further research on restorative and extra-curative therapies for IPF is necessary due to the absence of viable therapeutic choices. To assure minimum off-targeted site delivery and longer duration of action, techniques that offer a sustainable release of the drug, better bioavailability, and patient compliance can be used.The work is an overview of the main therapeutic targets and pertinent developing therapies for the management of IPF. This study is an attempt to focus on various drug delivery systems that are responsible for showing effectiveness in defense mechanisms against IPF.

The potential therapeutic impact of a topical bacteriophage preparation in treating Pseudomonas aeruginosa-infected burn wounds in mice

Aim

This study compared a topical formulation containing lytic phages with a routine antibiotic in the murine model of burn/Pseudomonas aeruginosa infected wound healing.

Methods & Materials

Isolated and purified lytic bacteriophages from hospital sewage were added to the polyethylene glycol (PEG) based ointment. A second-degree burned wound on the back of twenty-four adult female mice was created. The wounds were infected subcutaneously with 100 μL of 1 × 102-3 CFU/mL P. aeruginosa. After 24 h, mice were randomly assigned to one of four groups: mice received a standard antibiotic (antibiotic-treated group), mice received an ointment without bacteriophage (PEG-based group), mice received a PEG-ointment with bacteriophage (bacteriophage-treated group), or mice received no treatment (untreated-control group). Every two days, the contraction of burned wounds, physical activity, and rectal body temperature were recorded. On day 10, mice were sacrificed, and the wounds were cut off and evaluated histopathologically.

Results

In ointments containing PEG, bacteriophages were active and stable. The mice receiving bacteriophage and PEG-based ointment had substantially different wound contraction in primary wound healing (P = 0.001). When compared to the control group, the bacteriophage-treated group showed significant variations in wound contraction (P = 0.001). The wound contraction changed significantly between the antibiotic and PEG-based groups (P = 0.002). In all groups, physical activity in mice improved over time, with significant differences (P = 0.001). When the 8th day was compared to the days 2, 4, and 6, significant changes were found (P = 0.001, P = 0.02, and P = 0.02, respectively). Both the positive control and bacteriophage-treated groups showed perfect wound healing histopathologically. However, no significant variations in microscopic histopathological criteria were found between the groups.

Conclusion

Formulated phage ointment could be a promising approach for treating infected burn wounds infected by P. aeruginosa in mice with no allergic reactions.

Developing hyaluronic acid-proline-ferric ion cross-linked film for efficient wound healing application

A novel cross-linked film dressing that can accelerate wound healing and guard against bacterial infection was presented in this work. The hyaluronic acid-proline-ferric ion (HA-Pro-Fe³⁺) film was successfully prepared by physically cross-linking method, which the carboxyl groups of the HA and Pro molecules should be in coordination with Fe³⁺. The HA-Pro-Fe³⁺ cross-linked film showed three-dimensional porous structure, appropriate water vapor permeability and swelling property, favorable cytocompatibility and hemocompatibility, antibacterial and antioxidative capability. The results of rat skin wound healing confirmed that HA-Pro-Fe³⁺ film could accelerate epithelial regeneration and collagen deposition, promote angiogenesis and significantly improve skin wound healing. Elisa analysis indicated that HA-Pro-Fe³⁺ material could down-regulate the expression of IL-6 and TNF-α, and up-regulate the level of TGF-β₁ and VEGF. Given its biocompatibility, antibacterial ability, promotion of cell proliferation and angiogenesis, the wide application of HA-Pro-Fe³⁺ cross-linked film in wound repair would be anticipated.

Fabrication of hierarchical porous ethyl cellulose fibrous membrane by electro-centrifugal spinning for drug delivery systems with excellent integrated properties

Drug delivery systems (DDSs) based on micro-and nano- fibrous membrane have been developed for decades, in which great attention has been focused on achieving controlled drug release. However, the study on the integrated performance of these drug-loaded membranes in the use of in-vitro drug delivery dressing is lacking, as clinical medication also needs consideration from the perspectives of wound safety and patient convenience. Herein, a trilayered hierarchical porous ethyl cellulose (EC) fibrous membrane based DDS (EC-DDS) was developed by electro-centrifugal spinning. Significantly, the hierarchical porous structure of the EC-DDSs with high specific surface area (34.3 m²g^-1) and abundant long-regulative micro-and nano- channels demonstrated its merits in improving the hydrophobicity (long-term splash resistance (CA > 130°) and prolonging the drug release (the release time of ~80 % tetracycline hydrochloride (TCH) prolonged from 10 min to 24 h). Meanwhile, the trilayered EC-DDS also revealed excellent biocompatibility, antibacterial activity, air permeability, moisture permeability, water absorption capacity, mechanical strength, and flexibility. With these excellent integrated features, the EC-DDS could prevent external fluids, avoid infection, and provide comfort. Furthermore, this work also provides a new guide for the high-efficiency fabrication of porous fibrous membranes.

Construction of chitosan-based thermosensitive composite hydrogels for recognizing and combined chemo-photodynamic elimination of Gram-negative bacterial infections

Recently, rapid acquisition of bacterial resistance and consequent slow healing of infected wounds threaten human life and health. In this study, chitosan-based hydrogels and nanocomplexes ZnPc(COOH)₈:PMB composed of photosensitizer ZnPc(COOH)₈ and antibiotic polymyxin B (PMB) were integrated into a thermosensitive antibacterial platform ZnPc(COOH)₈:PMB@gel. Interestingly, fluorescence and reactive oxygen species (ROS) of ZnPc(COOH)₈:PMB@gel can be triggered by E. coli bacteria at 37 °C, but not by S. aureus bacteria, which gave the potential to simultaneously detect and treat Gram-negative bacteria. The survival rate for a certain amount of E. coli bacteria treated with ZnPc(COOH)₈:PMB (ZnPc(COOH)₈ 2 μM) was decreased by approximately fivefold than that with either ZnPc(COOH)₈ or PMB alone, indicating combined antibacterial efficacy. ZnPc(COOH)₈:PMB@gel facilitated the complete healing of wounds infected with E. coli bacteria in about seven days, while over 10 % wounds treated with ZnPc(COOH)₈ or PMB remained unhealed on the 9th day. ZnPc(COOH)₈:PMB resulted in a threefold increase of ZnPc(COOH)₈ fluorescence in E. coli bacteria suggesting enhanced uptake of ZnPc(COOH)₈ for the intervention of PMB on membrane permeability. The construction principle of the thermosensitive antibacterial platform and the combined antimicrobial strategy can be applied to other photosensitizers and antibiotics for detection and treatment of wound infections.

3D-Printed Functional Hydrogel by DNA-Induced Biomineralization for Accelerated Diabetic Wound Healing

Chronic wounds in diabetic patients are challenging because their prolonged inflammation makes healing difficult, thus burdening patients, society, and health care systems. Customized dressing materials are needed to effectively treat such wounds that vary in shape and depth. The continuous development of 3D-printing technology along with artificial intelligence has increased the precision, versatility, and compatibility of various materials, thus providing the considerable potential to meet the abovementioned needs. Herein, functional 3D-printing inks comprising DNA from salmon sperm and DNA-induced biosilica inspired by marine sponges, are developed for the machine learning-based 3D-printing of wound dressings. The DNA and biomineralized silica are incorporated into hydrogel inks in a fast, facile manner. The 3D-printed wound dressing thus generates provided appropriate porosity, characterized by effective exudate and blood absorption at wound sites, and mechanical tunability indicated by good shape fidelity and printability during optimized 3D printing. Moreover, the DNA and biomineralized silica act as nanotherapeutics, enhancing the biological activity of the dressings in terms of reactive oxygen species scavenging, angiogenesis, and anti-inflammation activity, thereby accelerating acute and diabetic wound healing. These bioinspired 3D-printed hydrogels produce using a DNA-induced biomineralization strategy are an excellent functional platform for clinical applications in acute and chronic wound repair.

Advances of Antimicrobial Peptide-Based Biomaterials for the Treatment of Bacterial Infections

Owing to the increase in multidrug-resistant bacterial isolates in hospitals globally and the lack of truly effective antimicrobial agents, antibiotic resistant bacterial infections have increased substantially. There is thus an urgent need to develop new antimicrobial drugs and their related formulations. In recent years, natural antimicrobial peptides (AMPs), AMP optimization, self-assembled AMPs, AMP hydrogels, and biomaterial-assisted delivery of AMPs have shown great potential in the treatment of bacterial infections. In this review, it is focused on the development prospects and shortcomings of various AMP-based biomaterials for treating animal model infections, such as abdominal, skin, and eye infections. It is hoped that this review will inspire further innovations in the design of AMP-based biomaterials for the treatment of bacterial infections and accelerate their commercialization.

Nanosilver-functionalized polysaccharides as a platform for wound dressing

Polysaccharides that are naturally sourced have enormous promise as wound dressings, due to their wider availability and reasonable cost and good biocompatibility. Furthermore, nanosilver extensively applied in wound treatment is attributed to its broad spectrum of antimicrobial effects and lesser drug resistance. Consequently, wound dressings in corporating nanosilver have attracted wide-scale interest in wound healing, and nanosilver-functionalized polysaccharide-based wound dressings present an affordable option for healing of chronic wounds. This review encompasses preparation methods, classification, and antibacterial performances of nanosilver wound dressings. The prospective research arenas of nanosilver-based wound polysaccharide dressings are also elaborated. The review attempts to include a summary of the most recent advancements in silver nanotechnology as well as guidance for the investigation of nanosilver-functionalized polysaccharide-based wound dressings.