Spatiotemporal delivery of bioactive molecules for wound healing using stimuli-responsive biomaterials

Using Three-Dimensional Bioprinting to Generate Realistic Models of Wound Healing

Significance: The skin serves as the primary defense against external stimuli, making it vulnerable to damage. Injuries can cause a dysregulated environment, resulting in chronic inflammation and inhibition of cell proliferation and migration, which delays recovery. Innovative approaches, such as three-dimensional (3D) bioprinting, can foster a controlled healing environment by promoting synergy between the skin microbiome and cells. Recent Advances: Traditional approaches to wound healing have focused on fostering an environment conducive to the interplay between cells, extracellular proteins, and growth factors. 3D bioprinting, a manufacturing technology with applications in tissue engineering, deposits biomaterial-based bioink containing living cells to fabricate custom-designed tissue scaffolds in a layer-by-layer fashion. This process controls the architecture and composition of a construct, producing multilayered and complex structures such as skin. Critical Issues: The selection of biomaterials for scaffolds has been a challenge when 3D skin tissue engineering. While prioritizing mechanical properties, current biomaterials often lack the ability to interact with environmental stimuli such as pH, temperature, or oxygen levels. Employing smart biomaterials that integrate bioactive molecules and adapt to external conditions could overcome these limitations. This innovation would enable scaffolds to create a sustainable wound-healing environment, fostering microbiome balance, reducing inflammation, and facilitating cellular recovery and tissue restoration, addressing critical gaps in existing wound care solutions. Future Directions: Novel bioink formulations for skin injury recovery are focused on improving long-term cell viability, proliferation, vascularization, and immune integration. Efficient recovery of the skin microbiome using bioactive molecules has the potential to create microenriched environments that support the recovery of the skin microbiome and restore immune regulation. This promising direction for future research aims to improve patient outcomes in wound care.

Microneedle patches: a new vantage point for diabetic wound treatments

Microneedle patches have emerged as a promising approach for diabetic wound healing by enabling the targeted delivery of therapeutic agents such as stem cells and their derived exosomes, as well as localized delivery of bioactive moieties. These patches offer a non-invasive and efficient method for administering therapeutic payloads directly to the site of the wound, bypassing systemic circulation and minimizing potential side effects. The targeted delivery of stem cells holds immense potential for promoting tissue regeneration and accelerating wound healing in diabetic patients. Similarly, the localized delivery of stem cell-derived exosomes, which are known for their regenerative and anti-inflammatory properties, can enhance the healing process. Furthermore, microneedle patches enable the precise and controlled release of bioactive moieties, such as growth factors and cytokines, directly to the wound site, creating a conducive microenvironment for tissue repair and regeneration. The challenges associated with microneedle patches for diabetic wound healing are multifaceted. Biocompatibility issues, variability in skin characteristics among diabetic patients, regulatory hurdles, scalability, cost considerations, long-term stability, and patient acceptance and compliance all present significant barriers to the widespread adoption and optimization of microneedle technology in clinical practice. Overcoming these challenges will require collaborative efforts from various stakeholders to advance the field and address critical gaps in research and development. Ongoing research focuses on enhancing the biocompatibility and mechanical properties of microneedle materials, developing customizable technologies for personalized treatment approaches, integrating advanced functionalities such as sensors for real-time monitoring, and improving patient engagement and adherence through education and support mechanisms. These advancements have the potential to improve diabetic wound management by providing tailored and precise therapies that promote faster healing and reduce complications. This review explores the current landscape of microneedle patches in the context of diabetic wound management, highlighting both the challenges that need to be addressed and future perspectives for this innovative treatment modality.

Spatiotemporally programmed release of aptamer tethered dual angiogenic growth factors

In tissue extracellular matrix (ECM), multiple growth factors (GFs) are sequestered through affinity interactions and released as needed by proteases, establishing spatial morphogen gradients in a time-controlled manner to guide cell behavior. Inspired by these ECM characteristics, we developed an "intelligent" biomaterial platform that spatially controls the combined bioavailability of multiple angiogenic GFs, specifically vascular endothelial growth factor (VEGF) and platelet-derived growth factor (PDGF-BB). Utilizing aptamer affinity interactions and complementary sequences within a GelMA matrix, our platform achieves on-demand, triggered release of individual GFs which can be "programmed" in temporally-controlled, repeatable cycles. The platform features stable incorporation of dual aptamers specific for both GFs, functional aptamer-CS molecular recognition in a 3D microenvironment with long-term stability of at least 15 days at physiological temperature, and spatially localized sequestration of individual GFs. Additionally, the system allows differential amounts of GFs to be released from the same hydrogels at different time-points, mimicking dynamic GF presentation in a 3D matrix similar to the native ECM. This flexible control over individual GF release kinetics opens new possibilities for dynamic GF presentation, with adjustable release profiles to meet the spatiotemporal needs of growing engineered tissue.

Rhein-loaded chitosan nanoparticles for treatment of MRSA-infected wound

The multi-drug resistance of methicillin-resistant Staphylococcus aureus (MRSA) and complex wound microenvironment challenge the repair of MRSA infected wound. Herein, in this study, α-tocopherol modified glycol chitosan (TG) nanoparticles encapsulated with phytochemical rhein (Rhein@TG NPs) were prepared for comprehensive anti-infection and promotion of MRSA infected wound healing. Rhein@TG NPs could not only specifically release rhein in the infection site in response to low pH and lipase of infectious microenvironment, but also up-regulated M1 macrophage polarization in the infection stage, thus achieving synergistically bacterial elimination with low possibility of developing resistance. Additionally, the NPs reduced the levels of pro-inflammatory factors in the post-infection stage, scavenged the ROS, promoted cell migration and angiogenesis, which significantly improved the microenvironment of infected wound healing. Therefore, this antibiotic-free NPs enabling anti-infection and promotion of wound healing provides a new and long-term strategy for the treatment of MRSA infected wound.

3D printing and computer-aided design techniques for drug delivery scaffolds in tissue engineering

INTRODUCTION

The challenge in tissue engineering lies in replicating the intricate structure of the native extracellular matrix. Recent advancements in AM, notably 3D printing, offer unprecedented capabilities to tailor scaffolds precisely, controlling properties like structure and bioactivity. CAD tools complement this by facilitating design using patient-specific data.

AREA’S COVERED

This review introduces additive manufacturing (AM) and computer-aided design (CAD) as pivotal tools in advancing tissue engineering, particularly cartilage regeneration. This article explores various materials utilized in AM, focusing on polymers and hydrogels for their advantageous properties in tissue engineering applications. Integrating bioactive molecules, including growth factors, into scaffolds to promote tissue regeneration is discussed alongside strategies involving different cell sources, such as stem cells, to enhance tissue development within scaffold matrices.

EXPERT OPINION

Applications of AM and CAD in addressing specific challenges like osteochondral defects and osteoarthritis in cartilage tissue engineering are highlighted. This review consolidates current research findings, offering expert insights into the evolving landscape of AM and CAD technologies in advancing tissue engineering, particularly in cartilage regeneration.

Synthesis of vitamin D3 loaded ethosomes gel to cure chronic immune-mediated inflammatory skin disease: physical characterization, in vitro and ex vivo studies

The purpose of the current work was to develop and characterize ethosomes of vitamin D3 gel that could more effectively work against psoriasis. Psoriasis is a chronic immune-mediated inflammatory skin disease. Due to vitamin D3 role in proliferation and maturation of keratinocytes, it has become an important local therapeutic option in the treatment of psoriasis. In this research we have initiated worked on ethosomes gels containing vitamin D3 to treat psoriasis. Soya lecithin 1-8% (w/v), propylene glycol and ethanol were used to create the formulations, which were then tested for vesicle size, shape, surface morphology, entrapment effectiveness, and in vitro drug permeation. The drug encapsulation efficiency of ethosomes was 96.25% ± 0.3. The particle sizes of the optimized ethosomes was 148 and 657 nm, and the PDI value was 0.770 ± 0.12 along with negative charge - 14 ± 3. Fourier transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) along with thermogravimetric analysis (TGA) studies confirmed the absence of interactions between vitamin D3 and other ingredients. It was determined that the total amount of medication that penetrated the membrane was 95.34% ± 3. Percentage lysis was very negligible for all strengths which were found less than 15%. Based on our research, ethosomes appear to be safe for use. The vitamin D3 ethosomal gel order, description, pH, and viscosity were all within the specified ranges, according to the findings of a 6-month investigation into the stability profile of the completed system. In this research, we successfully prepared ethosomes loaded with vitamin D3 and then converted it into gel for patients' easy applications.

A review of biopolymer-based hydrogels and IoT integration for enhanced diabetes diagnosis, management, and treatment

The prevalence of diabetes has been increasing globally, necessitating innovative approaches beyond conventional blood sugar monitoring and insulin control. Diabetes is associated with complex health complications, including cardiovascular diseases. Continuous Glucose Monitoring (CGM) devices, though automated, have limitations such as irreversibility and interference with bodily fluids. Hydrogel technologies provide non-invasive alternatives to traditional methods, addressing the limitations of current approaches. This review explores hydrogels as macromolecular biopolymeric materials capable of absorbing and retaining a substantial amount of water within their structure. Due to their high-water absorption properties, these macromolecules are utilized as coating materials for wound care and diabetes management. The study emphasizes the need for early diagnosis and monitoring, especially during the COVID-19 pandemic, where heightened attention to diabetic patients is crucial. Additionally, the article examines the role of the Internet of Things (IoT) and machine learning-based systems in enhancing diabetes management effectiveness. By leveraging these technologies, there is potential to revolutionize diabetes care, providing more personalized and proactive solutions. This review explores cutting-edge hydrogel-based systems as a promising avenue for diabetes diagnosis, management, and treatment, highlighting key biopolymers and technological integrations.

A study of scarless wound healing through programmed inflammation, proliferation and maturation using a redox balancing nanogel

In the study, we have shown the efficacy of an indigenously developed redox balancing chitosan gel with impregnated citrate capped Mn3O4 nanoparticles (nanogel). Application of the nanogel on a wound of preclinical mice model shows role of various signaling molecules and growth factors, and involvement of reactive oxygen species (ROS) at every stage, namely hemostasis, inflammation, and proliferation leading to complete maturation for the scarless wound healing. While in vitro characterization of nanogel using SEM, EDAX, and optical spectroscopy reveals pH regulated redox buffering capacity, in vivo preclinical studies on Swiss albino involving IL-12, IFN-γ, and α-SMA signaling molecules and detailed histopathological investigation and angiogenesis on every stage elucidate role of redox buffering for the complete wound healing process.

Grafting and controlled release of antimicrobial peptides from mesoporous silica

The grafting of antimicrobial peptides onto mesoporous silica particles and their controlled release using a green light-responsive linker, which enables tunable release-concentration-time profiles, is presented. The mesoporous silica surface is functionalized with antimicrobial peptides employing sequential functionalization steps, including the grafting of 3-[(2-propynylcarbamate)propyl]triethoxysilane (PPTEOS) as anchor, boron-dipyrromethene (BODIPY) as photosensitive linker, and C14R peptides as antimicrobial agents. Characterization using scanning electron microscopy (SEM), transmission electron microscopy (TEM), attenuated total reflectance infrared (ATR-IR) spectroscopy, and thermogravimetric analysis (TGA) validate the successful fabrication and functionalization of mesoporous silica. The ester-1,2,3-triazole-BODIPY demonstrates high sensitivity to green light and enables C14R antimicrobial peptide release with adjusted concentration-time profiles. Under the applied conditions up to 64 μg mL-1 were released within 40 minutes. The antimicrobial activity of the released C14R on Escherichia coli. BL21(DE3) is demonstrated. Overall, the use of the photosensitive linker not only provides a promising avenue for controlling the release of biomolecules and therapeutics but also opens up opportunities for the development of materials for targeted release in wound dressings, for example.

Biomaterials for Protein Delivery: Opportunities and Challenges to Clinical Translation

The development of biomaterials for protein delivery is an emerging field that spans materials science, bioengineering, and medicine. In this review, we highlight the immense potential of protein-delivering biomaterials as therapeutic options and discuss the multifaceted challenges inherent to the field. We address current advancements and approaches in protein delivery that leverage stimuli-responsive materials, harness advanced fabrication techniques like 3D printing, and integrate nanotechnologies for greater targeting and improved stability, efficacy, and tolerability profiles. We also discuss the demand for highly complex delivery systems to maintain structural integrity and functionality of the protein payload. Finally, we discuss barriers to clinical translation, such as biocompatibility, immunogenicity, achieving reliable controlled release, efficient and targeted delivery, stability issues, scalability of production, and navigating the regulatory landscape for such materials. Overall, this review summarizes insights from a survey of the current literature and sheds light on the interplay between innovation and the practical implementation of biomaterials for protein delivery.

Essential elements for spatiotemporal delivery of growth factors within bio-scaffolds: A comprehensive strategy for enhanced tissue regeneration

The precise delivery of growth factors (GFs) in regenerative medicine is crucial for effective tissue regeneration and wound repair. However, challenges in achieving controlled release, such as limited half-life, potential overdosing risks, and delivery control complexities, currently hinder their clinical implementation. Despite the plethora of studies endeavoring to accomplish effective loading and gradual release of GFs through diverse delivery methods, the nuanced control of spatial and temporal delivery still needs to be elucidated. In response to this pressing clinical imperative, our review predominantly focuses on explaining the prevalent strategies employed for spatiotemporal delivery of GFs over the past five years. This review will systematically summarize critical aspects of spatiotemporal GFs delivery, including judicious bio-scaffold selection, innovative loading techniques, optimization of GFs activity retention, and stimulating responsive release mechanisms. It aims to identify the persisting challenges in spatiotemporal GFs delivery strategies and offer an insightful outlook on their future development. The ultimate objective is to provide an invaluable reference for advancing regenerative medicine and tissue engineering applications.

Bioactive nanomaterials kickstart early repair processes and potentiate temporally modulated healing of healthy and diabetic wounds

Slow-healing and chronic wounds represent a major global economic and medical burden, and there is significant unmet need for novel therapies which act to both accelerate wound closure and enhance biomechanical recovery of the skin. Here, we report a new approach in which bioactives that augment early stages of wound healing can kickstart and engender effective wound closure in healthy and diabetic, obese animals, and set the stage for subsequent tissue repair processes. We demonstrate that a nanomaterial dressing made of silk fibroin and gold nanorods (GNR) stimulates a pro-neutrophilic, innate immune, and controlled inflammatory wound transcriptomic response. Further, Silk-GNR, lasered into the wound bed, in combination with exogeneous histamine, accelerates early-stage processes in tissue repair leading to effective wound closure. Silk-GNR and histamine enhanced biomechanical recovery of skin, increased transient neoangiogenesis, myofibroblast activation, epithelial-to-mesenchymal transition (EMT) of keratinocytes and a pro-resolving neutrophilic immune response, which are hitherto unknown activities for these bioactives. Predictive and temporally coordinated delivery of growth factor nanoparticles that modulate later stages of tissue repair further accelerated wound closure in healthy and diabetic, obese animals. Our approach of kickstarting healing by delivering the "right bioactive at the right time" stimulates a multifactorial, pro-reparative response by augmenting endogenous healing and immunoregulatory mechanisms and highlights new targets to promote tissue repair.

Spatially and Temporally Controllable BMP-2 and TGF-β3 Double Release From Polycaprolactone Fiber Scaffolds via Chitosan-Based Polyelectrolyte Coatings

Temporally and spatially controlled growth factor release from a polycaprolactone fiber mat, which also provides a matrix for directional cell colonization and infiltration, could be a promising regenerative approach for degenerated tendon-bone junctions. For this purpose, polycaprolactone fiber mats were coated with tailored chitosan-based nanogels to bind and release the growth factors bone morphogenetic protein 2 (BMP-2) and transforming growth factor-β3 (TGF-β3), respectively. In this work we provide meaningful in vitro data for the understanding of the drug delivery performance and sterilizability of novel implant prototypes in order to lay the foundation for in vivo testing. ELISA-based in vitro release studies were used to investigate the spatial and temporal control of release, as well as the influence of radiation sterilization on protein activity and release behavior. Layer-by-layer coatings based on BMP-2-containing chitosan tripolyphosphate nanogel particles and negatively charged alginate showed a good sustainment of BMP-2 release from chemically modified polycaprolactone fiber mats. Release control improved with increasing layer numbers. The approach of controlling the release via a barrier of cross-linked chitosan azide proved less promising. By using a simple, partial immersion-based dip-coating process, it was possible to apply opposing gradients of the growth factors BMP-2 and TGF-β3. Final radiation sterilization of the growth factor-loaded implant prototypes resulted in a radiation dose-correlated degradation of the growth factors, which could be prevented by lyophilization into protective matrices. For the manufacture of sterile implants, the growth factor loading step must probably be carried out under aseptic conditions. The layer-by-layer coated implant prototypes provided sustained release from opposing gradients of the growth factors BMP-2 and TGF-β3 and thus represent a promising approach for the restoration of tendon-bone defects.

Smart and versatile biomaterials for cutaneous wound healing

The global increase of cutaneous wounds imposes huge health and financial burdens on patients and society. Despite improved wound healing outcomes, conventional wound dressings are far from ideal, owing to the complex healing process. Smart wound dressings, which are sensitive to or interact with changes in wound condition or environment, have been proposed as appealing therapeutic platforms to effectively facilitate wound healing. In this review, the wound healing processes and features of existing biomaterials are firstly introduced, followed by summarizing the mechanisms of smart responsive materials. Afterwards, recent advances and designs in smart and versatile materials of extensive applications for cutaneous wound healing were submarined. Finally, clinical progresses, challenges and future perspectives of the smart wound dressing are discussed. Overall, by mapping the composition and intrinsic structure of smart responsive materials to their individual needs of cutaneous wounds, with particular attention to the responsive mechanisms, this review is promising to advance further progress in designing smart responsive materials for wounds and drive clinical translation.

Recent advances in bacterial cellulose-based antibacterial composites for infected wound therapy

Wound infection arising from pathogenic bacteria brought serious trouble to the patient and medical system. Among various wound dressings that are effective in killing pathogenic bacteria, antimicrobial composites based on bacterial cellulose (BC) are becoming the most popular materials due to their success in eliminating pathogenic bacteria, preventing wound infection, and promoting wound healing. However, as an extracellular natural polymer, BC is not inherently antimicrobial, which means that it must be combined with other antimicrobials to be effective against pathogens. BC has many advantages over other polymers, including nano-structure, significant moisture retention, non-adhesion to the wound surface, which has made it superior to other biopolymers. This review introduces the recent advances in BC-based composites for the treatment of wound infection, including the classification and preparation methods of composites, the mechanism of wound treatment, and commercial application. Moreover, their wound therapy applications include hydrogel dressing, surgical sutures, wound healing bandages, and patches are summarized in detail. Finally, the challenges and future prospects of BC-based antibacterial composites for the treatment of infected wounds are discussed.

A tetramethylpyrazine-loaded hyaluronic acid-based hydrogel modulates macrophage polarization for promoting wound recovery in diabetic mice

The failure of wound healing often causes lower limb disability and amputation of diabetic patients. Current strategies for diabetic wound management often fail to achieve the expected outcomes, and emerging alternatives are urgently needed. Recent advances in the identification of active compounds from traditional herbal medicines provide promising therapeutics for tissue repair and regeneration. In this study, the pro-healing effects of tetramethylpyrazine (TMP, a natural alkaloid found in Ligusticum chuanxiong Hort) for diabetic wounds were for the first time demonstrated. The cutaneous healing was mainly achieved by TMP-mediated macrophage polarization from pro-inflammatory to pro-healing phenotype. In addition, the topical administration of TMP was facilitated by the hyaluronic acid (HA) hydrogel for promoting the full-thickness wounds in the experimental diabetic mice. Consequently, TMP-loaded HA hydrogel (TMP-HA) profoundly accelerated the wound closure in comparison with TMP-loaded INTRASITE Gel (it is a commercial hydrogel), which was evident with the inflammation mitigation, the angiogenesis enhancement, and the collagen deposition. Our work reveals the macrophage-modulatory function of TMP for diabetic wound healing and demonstrates great potential of TMP-HA for clinical application.

[Latest Findings on Stimuli-Responsive Hydrogel Wound Dressings Applied in Diabetic Chronic Wound Repair]

Diabetic chronic wounds entail enormous psychological and economic burdens on diabetic patients. Traditional types of wound dressings lack diversity in their functions and do not have sufficient adaptability to the wound environment, which makes it difficult to meet the complicated needs arising during the healing process when they are used. Stimuli-responsive hydrogels respond specifically to the special environment of the wound area, for example, temperature, pH, glucose, etc., and achieve on-demand release by loading active substances, which effectively promotes diabetic wound healing. Herein, based on the research progress in stimulus-responsive wound dressings in recent years and the relevant work of our research team, we summarized and discussed hydrogel wound dressings responsive to temperature, pH, glucose, reactive oxygen species, enzymes, and multiple stimuli. Based on the special physiological environment of diabetic wounds, hydrogels with single or multiple stimuli-responsive properties can be designed so that they can release drugs on demand and improve the microenvironment of the wound, thus meeting the specific needs of different stages of wound healing. Although stimuli-responsive hydrogels currently show excellent therapeutic potential, there is still room for further development-cells or cytokines loaded in wound dressings usually act only at specific healing stages and the timing needs to be precisely controlled in order to avoid counterproductive effects on wound healing. In addition, the construction of sensor-therapeutic integrated devices for real-time monitoring of wound biochemical indicators so that drugs are release on demand and with precision to promote wound healing is also one of the topics that deserve more attention from researchers.

Marine-Derived Bioactive Peptides Self-Assembled Multifunctional Materials: Antioxidant and Wound Healing

Peptide self-assembling materials have received significant attention from researchers in recent years, emerging as a popular field in biological, environmental, medical, and other new materials studies. In this study, we utilized controllable enzymatic hydrolysis technology (animal proteases) to obtain supramolecular peptide self-assembling materials (CAPs) from the Pacific oyster (Crassostrea gigas). We conducted physicochemical analyses to explore the pro-healing mechanisms of CAPs on skin wounds in both in vitro and in vivo experiments through a topical application. The results demonstrated that CAPs exhibit a pH-responsive behavior for self-assembly and consist of peptides ranging from 550 to 2300 Da in molecular weight, with peptide chain lengths of mainly 11-16 amino acids. In vitro experiments indicated that CAPs display a procoagulant effect, free radical scavenging activity, and promote the proliferation of HaCaTs (112.74% and 127.61%). Moreover, our in vivo experiments demonstrated that CAPs possess the ability to mitigate inflammation, boost fibroblast proliferation, and promote revascularization, which accelerates the epithelialization process. Consequently, a balanced collagen I/III ratio in the repaired tissue and the promotion of hair follicle regeneration were observed. With these remarkable findings, CAPs can be regarded as a natural and secure treatment option with high efficacy for skin wound healing. The potential of CAPs to be further developed for traceless skin wound healing is an exciting area for future research and development.

Normalization of Tumor Vessels by Lenvatinib-Based Metallo-Nanodrugs Alleviates Hypoxia and Enhances Calreticulin-Mediated Immune Responses in Orthotopic HCC and Organoids

Immunocheckpoint inhibitors combined with Lenvatinib is the first line treatment for hepatocellular carcinoma (HCC), but their potency is hampered by the low response rate and adverse events. Herein, a targeted therapeutic strategy through the coassembly of Lenvatinib, Adriamycin, Fe³⁺ ion, and a natural polyphenol (metallo-nanodrugs) is presented by coordination effect for potentiating tumor vascular normalization and systematic chemo-immunotherapy to effectively inhibit the progression of HCC in both orthotopic model and patients-derived organoids. In mice with orthotopic HCC, the obtained metallo-nanodrugs efficiently increase the drug accumulation in orthotopic tumors and can respond to acidic tumor environment. The promotion of tumor vascular normalization by metallo-nanodrugs is observed, which enhances the infiltrating T lymphocytes in tumor, and reinforces the calreticulin-mediated antitumor immunity through alleviating hypoxia, reducing regulatory T cells, and down-regulating PDL1 expression of tumors. The excellent therapeutic efficiency with complete remission of orthotopic tumors (3/6) and long-term survival of mice (4/6, 42 days) are also achieved. Furthermore, the excellent therapeutic effect of metallo-nanodrugs is also validated in 5 patient-derived organoids, and hence can provide a marvelous systemic chemo-immunotherapy strategy for enhancing HCC treatment.

Ultrasonic-controlled "explosive" hydrogels to precisely regulate spatiotemporal osteoimmune disturbance

Spatiotemporal Immune disorder is a key factor leading to the failure of bone tissue healing. It is of vital importance to accurately suppress excessive peak immune response within 24-48 h of the injury and so regulate the spatiotemporal osteoimmune disturbance of bones. In this study, Ultrasound Controlled "Explosive" (UCE) hydrogels were prepared from gelatin-hyaluronic acid methacrylate hydrogels loaded with resveratrol nanobubbles produced by double emulsification through a condensation reaction. Such materials innovatively enable ultrasound-controlled RES release for precise regulation of spatiotemporal osteoimmune disorders. Under an ultrasonic power level of 1.5 W/cm², the rate of effectively released RES through the blast of UCE hydrogels reached 38.14 %. And compared with the control group, the in vivo inhibition of inflammation and osteogenesis effects of UCE hydrogels were more effective, respectively. As suggested by the results, the excessive local inflammatory response was inhibited by the release of resveratrol, the temporospatial disorder of bone immune was precisely regulated, and as a result, the process of bone repair was accelerated. Altogether, this study confirms that the newly created UCE Hydrogels effectively promote bone repair by intervening peak inflammation during the early phase of fracture healing.

Gelatin-Gallic Acid Microcomplexes Release GO/Cu Nanomaterials to Eradicate Antibiotic-Resistant Microbes and Their Biofilm

Wound-infecting bacteria are typically Pseudomonas aeruginosa and Staphylococcus epidermidis, both of which form biofilms and become resistant to antibiotics. To solve this problem, copper nanoparticles (Cu) on graphene oxide (GO) nanosheets were used as antibacterial materials. Since the excessive use of antibacterial substances is fatal to normal tissues, GO/Cu was encapsulated with a gelatin complex to lower the cytotoxicity. Among the catechol-based substances, gallic acid (GA), which has anti-inflammatory and antibacterial properties, was used in this study to impart stability to the gelatin complex. Gelatin (GE) and gallic acid (GA) were combined by a crosslinking method using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) as a crosslinker, and the crosslinking was confirmed by Fourier transform infrared (FT-IR), ¹H NMR, and the fluorescence property of GA. The GO/Cu@GE-GA microcomplexes exhibited more antibacterial effect against Gram-positive bacteria (S. epidermidis) and Gram-negative bacteria (P. aeruginosa) than when GO/Cu alone was used, and the antibiofilm effect was also confirmed. The cytotoxicity evaluation for human skin cells (human dermal fibroblast (HDF)) at the same concentration showed that it had low cytotoxicity and biocompatibility. This study shows the potential of antimicrobial gelatin microcomplex in prohibiting infectious bacteria and their biofilms and controlling the release of antimicrobial substances.

Nanomaterials and nanomaterials-based drug delivery to promote cutaneous wound healing

Various factors could damage the structure and integrity of skin to cause wounds. Nonhealing or chronic wounds seriously affect the well-being of patients and bring heavy burdens to the society. The past few decades have witnessed application of numerous nanomaterials to promote wound healing. Owing to the unique physicochemical characteristics at nanoscale, nanomaterials-based therapy has been regarded as a potential approach to promote wound healing. In this review, we first overview the wound categories, wound healing process and critical influencing factors. Then applications of nanomaterials with intrinsic therapeutic effect and nanomaterials-based drug delivery systems to promote wound healing are addressed in detail. Finally, current limitations and future perspectives of nanomaterials in wound healing are discussed.

Scaffolds in the microbial resistant era: Fabrication, materials, properties and tissue engineering applications

Due to microbial infections dramatically affect cell survival and increase the risk of implant failure, scaffolds produced with antimicrobial materials are now much more likely to be successful. Multidrug-resistant infections without suitable prevention strategies are increasing at an alarming rate. The ability of cells to organize, develop, differentiate, produce a functioning extracellular matrix (ECM) and create new functional tissue can all be controlled by careful control of the extracellular microenvironment. This review covers the present state of advanced strategies to develop scaffolds with antimicrobial properties for bone, oral tissue, skin, muscle, nerve, trachea, cardiac and other tissue engineering applications. The review focuses on the development of antimicrobial scaffolds against bacteria and fungi using a wide range of materials, including polymers, biopolymers, glass, ceramics and antimicrobials agents such as antibiotics, antiseptics, antimicrobial polymers, peptides, metals, carbon nanomaterials, combinatorial strategies, and includes discussions on the antimicrobial mechanisms involved in these antimicrobial approaches. The toxicological aspects of these advanced scaffolds are also analyzed to ensure future technological transfer to clinics. The main antimicrobial methods of characterizing scaffolds’ antimicrobial and antibiofilm properties are described. The production methods of these porous supports, such as electrospinning, phase separation, gas foaming, the porogen method, polymerization in solution, fiber mesh coating, self-assembly, membrane lamination, freeze drying, 3D printing and bioprinting, among others, are also included in this article. These important advances in antimicrobial materials-based scaffolds for regenerative medicine offer many new promising avenues to the material design and tissue-engineering communities.

•

Antibacterial, antifungal and antibiofilm scaffolds.

•

Antimicrobial scaffold fabrication techniques.

•

Antimicrobial biomaterials for tissue engineering applications.

•

Antimicrobial characterization methods of scaffolds.

•

Bone, oral tissue, skin, muscle, nerve, trachea, cardiac, among other applications.

Tailoring combinatorial lipid nanoparticles for intracellular delivery of nucleic acids, proteins, and drugs

Lipid nanoparticle (LNP)-based drug delivery systems have become the most clinically advanced non-viral delivery technology. LNPs can encapsulate and deliver a wide variety of bioactive agents, including the small molecule drugs, proteins and peptides, and nucleic acids. However, as the physicochemical properties of small- and macromolecular cargos can vary drastically, every LNP carrier system needs to be carefully tailored in order to deliver the cargo molecules in a safe and efficient manner. Our group applied the combinatorial library synthesis approach and in vitro and in vivo screening strategy for the development of LNP delivery systems for drug delivery. In this Review, we highlight our recent progress in the design, synthesis, characterization, evaluation, and optimization of combinatorial LNPs with novel structures and properties for the delivery of small- and macromolecular therapeutics both in vitro and in vivo. These delivery systems have enormous potentials for cancer therapy, antimicrobial applications, gene silencing, genome editing, and more. We also discuss the key challenges to the mechanistic study and clinical translation of new LNP-enabled therapeutics.

Local Administration of Ginkgolide B Using a Hyaluronan-Based Hydrogel Improves Wound Healing in Diabetic Mice

The delayed and incomplete healing of diabetic wounds remains a major concern of global healthcare. The complex biological processes within the diabetic wound, such as chronic inflammation, impaired blood vessel growth and immature collagen remodeling, dramatically cause the failure of current treatments. Thus, emerging therapeutic strategies are highly desirable. Ginkgolide B (GB, a natural product extracted from the leaves of Ginkgo biloba L.) has been applied in the treatment of cerebrovascular and cardiovascular disorders, which is mainly due to the anti-oxidative, anti-inflammatory and proliferative effects. In this study, the role of GB in facilitating the anti-inflammatory and pro-healing effects on diabetic wounds was for the first time confirmed using in vitro, ex vivo and in vivo experimental methods. As a consequence, GB was able to significantly achieve the activities of anti-inflammation, re-epithelialization, and pro-angiogenesis. Previously, a hydrogel has been developed using the high molecular weight hyaluronan (hyaluronic acid, HA) in our laboratory. In this study, this hydrogel was utilized in vivo for local administration of GB to the full-thickness wounds of diabetic mice. The resultant hydrogel formulation (HA-GB) resulted in the reduction of inflammation, the enhancement of re-epithelialization and angiogenesis, and the modulation of collagens from type III to type I, significantly promoting the healing outcome as compared with a commercially available wound dressing product (INTRASITE Gel). This study confirms a great therapeutic promise of HA-GB for the chronic wounds of diabetic patients.

Interactions Between Immunomodulatory Biomaterials and Immune Microenvironment: Cues for Immunomodulation Strategies in Tissue Repair

The foreign body response (FBR) caused by biomaterials can essentially be understood as the interaction between the immune microenvironment and biomaterials, which has severely impeded the application of biomaterials in tissue repair. This concrete interaction occurs via cells and bioactive substances, such as proteins and nucleic acids. These cellular and molecular interactions provide important cues for determining which element to incorporate into immunomodulatory biomaterials (IMBs), and IMBs can thus be endowed with the ability to modulate the FBR and repair damaged tissue. In terms of cellular, IMBs are modified to modulate functions of immune cells, such as macrophages and mast cells. In terms of bioactive substances, proteins and nucleic acids are delivered to influence the immune microenvironment. Meanwhile, IMBs are designed with high affinity for spatial targets and the ability to self-adapt over time, which allows for more efficient and intelligent tissue repair. Hence, IMB may achieve the perfect functional integration in the host, representing a breakthrough in tissue repair and regeneration medicine.

Exploring bioactive peptides as potential therapeutic and biotechnology treasures: A contemporary perspective

In preceding years, bioactive peptides (BAPs) have piqued escalating attention owing to their multitudinous biological features. To date, many potential BAPs exhibiting anti-cancer activities have been documented; yet, obstacles such as their safety profiles and consumer acceptance continue to exist. Moreover, BAPs have been discovered to facilitate the suppression of Coronavirus Disease 2019 (CoVID-19) and maybe ideal for treating the CoVID-19 infection, as stated by published experimental findings, but their widespread knowledge is scarce. Likewise, there is a cornucopia of BAPs possessing neuroprotective effects that mend neurodegenerative diseases (NDs) by regulating gut microbiota, but they remain a subject of research interest. Additionally, a plethora of researchers have attempted next-generation approaches based on BAPs, but they need scientific attention. The text format of this critical review is organized around an overview of BAPs' versatility and diverse bio functionalities with emphasis on recent developments and novelties. The review is alienated into independent sections, which are related to either BAPs based disease management strategies or next-generation BAPs based approaches. BAPs based anti-cancer, anti-CoVID-19, and neuroprotective strategies have been explored, which may offer insights that could help the researchers and industries to find an alternate regimen against the three aforementioned fatal diseases. To the best of our knowledge, this is the first review that has systematically discussed the next-generation approaches in BAP research. Furthermore, it can be concluded that the BAPs may be optimal for the management of cancer, CoVID-19, and NDs; nevertheless, experimental and preclinical studies are crucial to validate their therapeutic benefits.

Smart Multifunctional Polymer Systems as Alternatives or Supplements of Antibiotics To Overcome Bacterial Resistance

In recent years, infectious diseases have again become a critical threat to global public health largely due to the challenges posed by antimicrobial resistance. Conventional antibiotics have played a crucial role in combating bacterial infections; however, their efficacy is significantly impaired by widespread drug resistance. Natural antimicrobial peptides (AMPs) and their polymeric mimics demonstrate great potential for killing bacteria with low propensity of resistance as they target the microbial membrane rather than a specific molecular target, but they are also toxic to the host eukaryotic cells. To minimize antibiotics systemic spread and the required dose that promote resistance and to advocate practical realization of the promising activity of AMPs and polymers, smart systems to target bacteria are highly sought after. This review presents bacterial recognition by various specific targeting molecules and the delivery systems of active components in supramolecules. Bacteria-induced activations of antimicrobial-based nanoformulations are also included. Recent advances in the bacteria targeting and delivery of synthetic antimicrobial agents may assist in developing new classes of highly selective antimicrobial systems which can improve bactericidal efficacy and greatly minimize the spread of bacterial resistance.

A Transformable Amphiphilic and Block Polymer-Dendron Conjugate for Enhanced Tumor Penetration and Retention with Cellular Homeostasis Perturbation via Membrane Flow

Efficient penetration and retention of therapeutic agents in tumor tissues can be realized through rational design of drug delivery systems. Herein, a polymer-dendron conjugate, POEGMA-b-p(GFLG-Dendron-Ppa) (GFLG-DP), is presented, which allows a cathepsin-B-triggered stealthy-to-sticky structural transformation. The compositions and ratios are optimized through dissipative particle dynamics simulations. GFLG-DP displays tumor-specific transformation and the consequently released dendron-Ppa is found to effectively accumulate on the tumor cell membrane. The interaction between the dendron-Ppa and the tumor cell membrane results in intracellular and intercellular transport via membrane flow, thus achieving efficient deep penetration and prolonged retention of therapeutic agents in the solid tumor tissues. Meanwhile, the interaction of dendron-Ppa with the endoplasmic reticulum disrupts cell homeostasis, making tumor cells more vulnerable and susceptible to photodynamic therapy. This platform represents a versatile approach to augmenting the tumor therapeutic efficacy of a nanomedicine via manipulation of its interactions with tumor membrane systems.

Injectable Acylhydrazone-Linked RAFT Polymer Hydrogels for Sustained Protein Release and Cell Encapsulation

A new class of temperature responsive polymer, termed PADO, is synthesized by reversible addition-fragmentation chain-transfer polymerization. Synthesized from copolymerization of diacetone acrylamide (DAAM), di(ethylene glycol) ethyl ether acrylate, and oligo(ethylene glycol) methyl ether acrylate, PADO polymer phase separates at temperature above its lower critical solution temperature (36-42 °C) due to enhanced hydrophobic interactions between the short ethylene glycol side chains. Solution of PADO polymers exhibit injectable shear-thinning properties and reach sol-gel transition rapidly (<5 min) at 37 °C. When the ketone moieties on DAAM are linked by adipic acid dihydrazdie, PADO polymers form crosslinked and injectable acylhydrazone hydrogels, which are hydrolytically degradable at a mild acidic environment owing to the pH sensitive acylhydrazone bonds. The pH-responsive degradation kinetics can be controlled by tuning polymer contents and ketone/hydrazide ratio. Importantly, the injectable PADO hydrogels are highly cytocompatible and can be easily formulated for pH-responsive sustained protein delivery.

Development and Characterization of Multifunctional Wound Dressing with the Property of Anti-bacteria and Angiogenesis

Overcoming the bacterial infection and promoting angiogenesis are challenge and imperious demands in wound healing and skin regeneration. Hereby, we developed a multifunctional AMP/S1P@PLA/gelatin wound dressing fabricated by electrospinning poly (L-lactic acid) (PLA)/gelatin with antimicrobial polypeptides (AMPs) and sphingosine-1-phosphate (S1P) in order to inhibit the bacteria growth and induce angiogenesis. In our work, AMP/S1P@PLA/gelatin wound dressing was obtained by two-step method of electrospinning and dopamine adsorption. Our results showed that incorporating AMP into PLA/gelatin nanofibrous membranes significantly improved antibacterial properties against both Escherichia coli and Staphylococcus aureus. S1P releasing from AMP/S1P@PLA/gelatin nanofibrous membranes could significantly enhance tube formation. Simultaneously, we found that the AMP/S1P@PLA/gelatin nanofibrous membranes facilitated the adhesion, proliferation, and migration of human umbilical vein endothelial cells (HUVECs) and murine fibroblast (L929). AMP/S1P@PLA/gelatin membranes could also accelerate infected wound healing and skin regeneration by antibacterial and pro-angiogenesis effects. In summary, our developed AMP/S1P@PLA/gelatin nanofibrous membranes could be multifunctional dressing for infected wound healing and skin regeneration. Schematic figure to describe the characterizations and preparation of AMP/S1P@PLA/gelatin nanofibrous membranes.

Controlled pVEGF delivery via a gene-activated matrix comprised of a peptide-modified non-viral vector and a nanofibrous scaffold for skin wound healing

Regulating cell function and tissue formation by combining gene delivery with functional scaffolds to create gene-activated matrices (GAMs) is a promising strategy for tissue engineering. However, fabrication of GAMs with low cytotoxicity, high transfection efficiency, and long-term gene delivery properties remains a challenge. In this study, a non-viral DNA delivery nanocomplex was developed by modifying poly (D, L-lactic-co-glycolic acid)/polyethylenimine (PLGA/PEI) nanoparticles with the cell-penetrating peptide KALA. Subsequently, the nanocomplex carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF) was immobilized onto a polydopamine-coated electrospun alginate nanofibrous scaffold, resulting in a GAM for enhanced skin wound healing. The nanocomplex exhibited much lower cytotoxicity and comparable or even higher transfection efficiency compared with PEI. The GAM enabled sustained gene release and long-tern transgene expression of VEGF in vitro. In an excisional full-thickness skin wound rat model, the GAM could accelerate wound closure, promote complete re-epithelization, reduce inflammatory response, and enhance neovascularization, ultimately enhancing skin wound healing. The current GAM comprising a low-toxic gene delivery nanocomplex and a biocompatible 3D nanofibrous scaffold demonstrates great potential for mediating long-term cell functions and may become a powerful tool for gene delivery in tissue engineering. STATEMENT OF SIGNIFICANCE: Gene delivery is a promising strategy in promoting tissue regeneration as an effective alternative to growth factor delivery, but the study on three-dimensional gene-activated scaffolds remains in its infancy. Herein, a biodegradable nanofibrous gene-activated matrix integrating non-viral nanoparticle vector was designed and evaluated both in vitro and in vivo. The results show that the nanoparticle vector provided high transfection efficiency with minimal cytotoxicity. After surface immobilization of the nanocomplexes carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF), the nanofibrous scaffold enabled sustained DNA release and long-term transgene expression in vitro. In a rat full-thickness skin wound model, the scaffold could accelerate wound healing. This innovative gene-activated matrix can be a promising candidate for tissue regeneration.

Precision-engineered niche for directed differentiation of MSCs to lineage-restricted mineralized tissues

The major difference between tissue healing and regeneration is the extent of instructional cues available to precisely direct the biological response. A classic example is reparative or osteodentin that is seen in response to physicochemical injury to the pulp-dentin complex. Dentin regeneration can direct the differentiation of dental stem cells using concerted actions of both soluble (biomolecules, agonists, and antagonists) and insoluble (matrix topology) cues. The major purpose of this study was to examine the synergistic combination of two discrete biomaterial approaches by utilizing nanofiber scaffolds in discrete configurations (aligned or random) with incorporated polymeric microspheres capable of controlled release of growth factors. Further, to ensure appropriate disinfection for clinical use, Radio-Frequency Glow Discharge (RFGD) treatments were utilized, followed by seeding with a mesenchymal stem cell (MSC) line. SEM analysis revealed electrospinning generated controlled architectural features that significantly improved MSC adhesion and proliferation on the aligned nanofiber scaffolds compared to randomly oriented scaffolds. These responses were further enhanced by RFGD pre-treatments. These enhanced cell adhesion and proliferative responses could be attributed to matrix-induced Wnt signaling that was abrogated by pre-treatments with anti-Wnt3a neutralizing antibodies. Next, we incorporated controlled-release microspheres within these electrospun scaffolds with either TGF-β1 or BMP4. We observed that these scaffolds could selectively induce dentinogenic or osteogenic markers (DSPP, Runx2, and BSP) and mineralization. This work demonstrates the utility of a novel, modular combinatorial scaffold system capable of lineage-restricted differentiation into bone or dentin. Future validation of this scaffold system in vivo as a pulp capping agent represents an innovative dentin regenerative approach capable of preserving tooth pulp vitality.

Silver Peroxide Nanoparticles for Combined Antibacterial Sonodynamic and Photothermal Therapy

Metal peroxide nanoparticles designed to elevate the oxidative stress are considered a promising nanotherapeutics in biomedical applications, including chemotherapy, photodynamic therapy, and bacterial disinfection. However, their lack of specificity towards the therapeutic target can cause toxic side effects to healthy tissues. Here, silver peroxide nanoparticles (Ag₂ O₂ NPs) capable of controlled reactive oxygen species (ROS) release are synthesized. The release of bactericidal Ag⁺ ions and ROS is strictly regulated by external stimuli of ultrasound (US) and near-infrared (NIR) light. In vitro and in vivo investigations show that the Ag₂ O₂ NPs present enhanced antibacterial and antibiofilm capabilities with a killing efficiency >99.9999% in 10 min, significantly accelerate multi-drug resistant Staphylococcus aureus infected skin wound closure with excellent cytocompatibility and hemocompatibility. This work not only provides the first paradigm for fabricating silver peroxide nanoparticle but also introduces a highly efficient noninvasive and safe therapeutic modality for combating bacterial infectious diseases.

Potent Particle-Based Vehicles for Growth Factor Delivery from Electrospun Meshes: Fabrication and Functionalization Strategies for Effective Tissue Regeneration

Functionalization of electrospun meshes with growth factors (GFs) is a common strategy for guiding specific cell responses in tissue engineering. GFs can exert their intended biological effects only when they retain their bioactivity and can be subsequently delivered in a temporally controlled manner. However, adverse processing conditions encountered in electrospinning can potentially disrupt GFs and diminish their biological efficacy. Further, meshes prepared using conventional approaches often promote an initial burst and rely solely on intrinsic fiber properties to provide extended release. Sequential delivery of multiple GFs─a strategy that mimics the natural tissue repair cascade─is also not easily achievable with traditional fabrication techniques. These limitations have hindered the effective use and translation of mesh-based strategies for tissue repair. An attractive alternative is the use of carrier vehicles (e.g., nanoparticles, microspheres) for GF incorporation into meshes. This review presents advances in the development of particle-integrated electrospun composites for safe and effective delivery of GFs. Compared to traditional approaches, we reveal how particles can protect GF activity, permit the incorporation of multiple GFs, decouple release from fiber properties, help achieve spatiotemporal control over delivery, enhance surface bioactivity, exert independent biological effects, and augment matrix mechanics. In presenting innovations in GF functionalization and composite engineering strategies, we also discuss specific in vitro and in vivo biological effects and their implications for diverse tissue engineering applications.

Release of basic fibroblast growth factor from acoustically-responsive scaffolds promotes therapeutic angiogenesis in the hind limb ischemia model

Pro-angiogenic growth factors have been studied as potential therapeutics for cardiovascular diseases like critical limb ischemia (CLI). However, the translation of these factors has remained a challenge, in part, due to problems associated with safe and effective delivery. Here, we describe a hydrogel-based delivery system for growth factors where release is modulated by focused ultrasound (FUS), specifically a mechanism termed acoustic droplet vaporization. With these fibrin-based, acoustically-responsive scaffolds (ARSs), release of a growth factor is non-invasively and spatiotemporally-controlled in an on-demand manner using non-thermal FUS. In vitro studies demonstrated sustained release of basic fibroblast growth factor (bFGF) from the ARSs using repeated applications of FUS. In in vivo studies, ARSs containing bFGF were implanted in mice following induction of hind limb ischemia, a preclinical model of CLI. During the 4-week study, mice in the ARS + FUS group longitudinally exhibited significantly more perfusion and less visible necrosis compared to other experimental groups. Additionally, significantly greater angiogenesis and less fibrosis were observed for the ARS + FUS group. Overall, these results highlight a promising, FUS-based method of delivering a pro-angiogenic growth factor for stimulating angiogenesis and reperfusion in a cardiovascular disease model. More broadly, these results could be used to personalize the delivery of therapeutics in different regenerative applications by actively controlling the release of a growth factor.

Keratose hydrogel for tissue regeneration and drug delivery

Keratin (KRT), a natural fibrous structural protein, can be classified into two categories: "soft" cytosolic KRT that is primarily found in the epithelia tissues (e.g., skin, the inner lining of digestive tract) and "hard" KRT that is mainly found in the protective tissues (e.g., hair, horn). The latter is the predominant form of KRT widely used in biomedical research. The oxidized form of extracted KRT is exclusively denoted as keratose (KOS) while the reduced form of KRT is termed as kerateine (KRTN). KOS can be processed into various forms (e.g., hydrogel, films, fibers, and coatings) for different biomedical applications. KRT/KOS offers numerous advantages over other types of biomaterials, such as bioactivity, biocompatibility, degradability, immune/inflammatory privileges, mechanical resilience, chemical manipulability, and easy accessibility. As a result, KRT/KOS has attracted considerable attention and led to a large number of publications associated with this biomaterial over the past few decades; however, most (if not all) of the published review articles focus on KRT regarding its molecular structure, biochemical/biophysical properties, bioactivity, biocompatibility, drug/cell delivery, and in vivo transplantation, as well as its applications in biotechnical products and medical devices. Current progress that is directly associated with KOS applications in tissue regeneration and drug delivery appears an important topic that merits a commentary. To this end, the present review aims to summarize the current progress of KOS-associated biomedical applications, especially focusing on the in vitro and in vivo effects of KOS hydrogel on cultured cells and tissue regeneration following skin injury, skeletal muscle loss, peripheral nerve injury, and cardiac infarction.

Review on Computer-Aided Design and Manufacturing of Drug Delivery Scaffolds for Cell Guidance and Tissue Regeneration

In the last decade, additive manufacturing (AM) processes have updated the fields of biomaterials science and drug delivery as they promise to realize bioengineered multifunctional devices and implantable tissue engineering (TE) scaffolds virtually designed by using computer-aided design (CAD) models. However, the current technological gap between virtual scaffold design and practical AM processes makes it still challenging to realize scaffolds capable of encoding all structural and cell regulatory functions of the native extracellular matrix (ECM) of health and diseased tissues. Indeed, engineering porous scaffolds capable of sequestering and presenting even a complex array of biochemical and biophysical signals in a time- and space-regulated manner, require advanced automated platforms suitable of processing simultaneously biomaterials, cells, and biomolecules at nanometric-size scale. The aim of this work was to review the recent scientific literature about AM fabrication of drug delivery scaffolds for TE. This review focused on bioactive molecule loading into three-dimensional (3D) porous scaffolds, and their release effects on cell fate and tissue growth. We reviewed CAD-based strategies, such as bioprinting, to achieve passive and stimuli-responsive drug delivery scaffolds for TE and cancer precision medicine. Finally, we describe the authors' perspective regarding the next generation of CAD techniques and the advantages of AM, microfluidic, and soft lithography integration for enhancing 3D porous scaffold bioactivation toward functional bioengineered tissues and organs.

Polyplex-Loaded Hydrogels for Local Gene Delivery to Human Dermal Fibroblasts

Impaired cutaneous healing leading to chronic wounds affects between 2 and 6% of the total population in most developed countries and it places a substantial burden on healthcare budgets. Current treatments involving antibiotic dressings and mechanical debridement are often not effective, causing severe pain, emotional distress, and social isolation in patients for years or even decades, ultimately resulting in limb amputation. Alternatively, gene therapy (such as mRNA therapies) has emerged as a viable option to promote wound healing through modulation of gene expression. However, protecting the genetic cargo from degradation and efficient transfection into primary cells remain significant challenges in the push to clinical translation. Another limiting aspect of current therapies is the lack of sustained release of drugs to match the therapeutic window. Herein, we have developed an injectable, biodegradable and cytocompatible hydrogel-based wound dressing that delivers poly(β-amino ester)s (pBAEs) nanoparticles in a sustained manner over a range of therapeutic windows. We also demonstrate that pBAE nanoparticles, successfully used in previous in vivo studies, protect the mRNA load and efficiently transfect human dermal fibroblasts upon sustained release from the hydrogel wound dressing. This prototype wound dressing technology can enable the development of novel gene therapies for the treatment of chronic wounds.

Biomaterials for protein delivery for complex tissue healing responses

Tissue repair requires a complex cascade of events mediated by a variety of cells, proteins, and matrix molecules; however, the healing cascade can be easily disrupted by numerous factors, resulting in impaired tissue regeneration. Recent advances in biomaterials for tissue regeneration have increased the ability to tailor the delivery of proteins and other biomolecules to injury sites to restore normal healing cascades and stimulate robust tissue repair. In this review, we discuss the evolution of the field toward creating biomaterials that precisely control protein delivery to stimulate tissue regeneration, with a focus on addressing complex and dynamic injury environments. We highlight biomaterials that leverage different mechanisms to deliver and present proteins involved in healing cascades, tissue targeting and mimicking strategies, materials that can be triggered by environmental cues, and integrated strategies that combine multiple biomaterial properties to improve protein delivery. Improvements in biomaterial design to address complex injury environments will expand our understanding of both normal and aberrant tissue repair processes and ultimately provide a better standard of patient care.