Postharvest disease inhibition in fruit by synthesis and characterization of chitosan iron oxide nanoparticles

Green-synthesized α-Fe2O3-nanoparticles as potent antibacterial, anti-biofilm and anti-virulence agent against pathogenic bacteria

BACKGROUND

Antimicrobial resistance (AMR) presents a serious threat to health, highlighting the urgent need for more effective antimicrobial agents with innovative mechanisms of action. Nanotechnology offers promising solutions by enabling the creation of nanoparticles (NPs) with antibacterial properties. This study aimed to explore the antibacterial, anti-biofilm, and anti-virulence effects of eco-friendly synthesized α-Fe₂O₃ nanoparticles (α-Fe₂O₃-NPs) against pathogenic bacteria.

METHODS

The α-Fe2O3-NPs were synthesized using a green synthesis method that involved Bacillus sp. GMS10, with iron sulfate as a precursor. The NPs were characterized through ultraviolet-visible (UV-Vis) spectroscopy, Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray Spectroscopy (EDX), Dynamic Light Scattering (DLS), Zeta Potential Analysis, X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FT-IR). Their antimicrobial activity was assessed against Gram-positive and Gram-negative bacteria. The study also evaluated the effect of the α-Fe2O3-NPs on bacterial cell membrane disruption, biofilm formation, efflux pump inhibition, and swarming motility.

RESULTS

The UV-Visible spectrum showed a peak at 228 nm, indicating plasmon absorbance of the α-Fe2O3-NPs. FESEM revealed spherical NPs (~ 30 nm), and DLS confirmed a hydrodynamic size of 36.3 nm with a zeta potential of -25.1 mV, indicating good stability. XRD identified the rhombohedral α-Fe2O3 phase, and FTIR detected O-H, C-H, C = O, and Fe-O functional groups, suggesting organic capping for stability. Antibacterial assays demonstrated that the α-Fe2O3-NPs had MIC values ranging from 0.625 to 5 µg/mL and MBC values between 5 and 20 µg/mL, with a strong effect against Gram-positive bacteria. The NPs significantly increased membrane permeability, inhibited biofilm formation in S. aureus and E. coli, and disrupted efflux pumps in S. aureus SA-1199B (a fluoroquinolone-resistant strain overexpressing norA). Additionally, the α-Fe2O3-NPs inhibited P. aeruginosa swarming motility.

CONCLUSION

The bacteria-synthesized α-Fe2O3-NPs demonstrated significant antimicrobial activity, particularly against Gram-positive bacteria, and exhibited strong potential for inhibiting biofilm formation and efflux pump activity, offering a promising strategy to address AMR. Focus on further evaluating their therapeutic potential in clinical settings and conducting comprehensive assessments of their safety profiles to ensure their applicability in medical treatments.

CLINICAL TRIAL NUMBER

Not applicable.

Green synthesis of silver nanoparticles from supercritical CO2 mediated Lagerstroemia speciosa extract: Characterization, antimicrobial and antibiofilm activity

In the current study, optimal supercritical fluid extract (SFE) of Lagerstroemia speciosa (LS) leaves at pressure 29.59 MPa (MPa), temperature 89.50 °C and extraction time 53.85 min was used to extract phenolic compounds for the synthesis of silver nanoparticles (AgNPs). The synthesis was studied for 0-20 h. Initially the synthesis of nanoparticles (SFELS-AgNPs) was confirmed using UV -spectroscopy. It demonstrated a maximum surface plasmon resonance at 430 nm. The crystallite dimension of nanoparticles was determined using X-ray diffraction (XRD) (13.47 nm), Transmission electron microscopy (TEM), zeta potential analysis and energy-dispersive X-ray analysis (EDAX) were used to analyze the morphology, surface charge and presence of differential elements in SFELS-AgNPs respectively. Developed nanoparticles revealed antimicrobial activity against 2 g-positive viz. Staphylococcus aureus and Bacillus cereus, and 3 g-negative bacteria viz. Klebsiella pneumonia, Pseudomonas aeruginosa and Escherichia coli. The nanoparticle showed a minimum inhibitory concentration (MIC) of 64 μg/ml whereas the minimum bactericidal concentration (MBC) 128 μg/ml against K. pneumonia. They significantly inhibited K. pneumonia biofilm formation which was confirmed using scanning electron microscopy (SEM). The results were encouraging compared to the standards drug Chloramphenicol and other controls. The generated nanoparticles have highly effective antimicrobial properties against pathogenic bacteria.

Antifungal Action of Metallic Nanoparticles Against Fungicide-Resistant Pathogens Causing Main Postharvest Lemon Diseases

Postharvest fungal diseases are the main cause of economic losses in lemon production. The continued use of synthetic fungicides to control the diseases favors the emergence of resistant strains, which encourages the search for alternatives. The aim of this study was to assess the efficacy of metallic nanoparticles (NPs) as antifungal agents against local isolates of Penicillium digitatum and Penicillium italicum, each of them in a fungicide-sensitive and -resistant version, and a Geotrichum citri-aurantii isolate. NPs of ZnO, CuO, and Ag were synthesized and characterized by spectroscopy and microscopy, presenting average sizes < 25 nm and spherical shapes. ZnO-NPs did not present antifungal activity at the assayed conditions, while the minimum fungicidal concentrations (MFCs) were 1000 and 10 µg mL-1 for CuO-NPs and Ag-NPs, respectively. The NPs' antimicrobial action included conidial membrane permeability and strong intracellular disorganization. Moreover, the Ag-NPs reduced green mold incidence on inoculated lemons when applied to the fruit. Taken together, Ag-NPs were effective in inhibiting both fungicide-sensitive and -resistant isolates of the main lemon postharvest pathogens, suggesting their potential use as an alternative approach.

Antimicrobial activity and nanoremediation of heavy metals using biosynthesized CS/GO/ZnO nanocomposite by Bacillus subtilis ATCC 6633 alone or immobilized in a macroporous cryogel

BACKGROUND

The world society is still suffering greatly from waterborne infections, with developing countries bearing most of the morbidity and death burden, especially concerning young children. Moreover, microbial resistance is one of the most prevalent global problems that extends the need for self-medication and the healing period, or it may be linked to treatment failure that results in further hospitalization, higher healthcare expenses, and higher mortality rates. Thus, innovative synthesis of new antimicrobial materials is required to preserve the environment and enhance human health.

RESULTS

The present study highlighted a simple and cost-effective approach to biosynthesize a chitosan/graphene oxide/zinc oxide nanocomposite (CS/GO/ZnO) alone and immobilized in a macroporous cryogel as a new antimicrobial agent. Bacillus subtilis ATCC 6633 was used as a safe and efficient bio-nano-factory during biosynthesis. The formation of CS/GO/ZnO was confirmed and characterized using different analyses including ultraviolet-visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), selective area diffraction pattern (SADP), Zeta analyses, scanning electron microscope (SEM) and transmission electron microscopy (TEM). GO combined with ZnO NPs successfully and displayed an adsorption peak at 358 nm. The XRD results showed the crystalline composition of the loaded ZnO NPs on GO sheets. FTIR spectrum confirmed the presence of proteins during the synthesis which act as stabilizing and capping agents. The nanocomposite has a high negative surface charge (-32.8 ± 5.7 mV) which increases its stability. SEM and TEM showing the size of biosynthesized ZnO-NPs was in the range of 40-50 nm. The CS/GO/ZnO alone or immobilized in cryogel revealed good antimicrobial activities against B. cereus ATCC 14,579, Escherichia coli ATCC 25,922, and Candida albicans ATCC 10,231 in a dose-dependent manner. The CS/GO/ZnO cryogel revealed higher antimicrobial activity than GO/ZnO nanocomposite and standard antibiotics (amoxicillin and miconazole) with inhibition zones averages of 24.33 ± 0.12, 15.67 ± 0.03, and 17.5 ± 0.49 mm, respectively. The MIC values of the prepared nanocomposite against B. cereus, E. coli, and C. albicans were 80, 80, and 90 µg/ml compared to standard drugs (90, 120 and 150 µg/ml, respectively). According to the TEM ultrastructure studies of nanocomposite-treated microbes, treated cells had severe deformities and morphological alterations compared to the untreated cells including cell wall distortion, the separation between the cell wall and plasma membrane, vacuoles formation moreover complete cell lyses were also noted. In the cytotoxicity test of CS/GO/ZnO alone and its cryogel, there was a significant reduction (p˂0.05) in cell viability of WI-38 normal lung cell line after the concentration of 209 and 164 µg/ml, respectively. It showed the low toxic effect of the nanocomposite and its cryogel on the WI-38 line which implies its safety. In addition, water treatment with the CS/GO/ZnO cryogel decreased turbidity (0.58 NTU), total coliform (2 CFU/100 ml), fecal coliform (1 CFU/100 ml), fecal Streptococcus (2 CFU/100 ml), and heterotrophic plate counts (53 CFU/1 ml) not only in comparison with the chlorine-treated samples (1.69 NTU, 4 CFU/100 ml, 6 CFU/100 ml, 57 CFU/100 ml, and 140 CFU/1 ml, respectively) but also with the raw water samples (6.9 NTU, 10800 CFU/100 ml, 660 CFU/100 ml, 800 CFU/100 ml, and 4400 CFU/1 ml, respectively). Moreover, cryogel significantly decreased the concentration of different heavy metals, especially cobalt compared to chlorine (0.004 ppm, 0.002 ppm, and 0.001 ppm for raw water, chlorine-treated, and cryogel-treated groups, respectively) which helped in the reduction of their toxic effects.

CONCLUSION

This study provides an effective, promising, safe, and alternative nanocomposite to treat different human and animal pathogenic microbes that might be used in different environmental, industrial, and medical applications.

Novel approaches of mycosynthesized zinc oxide nanoparticles (ZnONPs) using Pleurotus sajor-caju extract and their biological and environmental applications

In this study, mycosynthesized zinc oxide nanoparticles (ZnONPs) are fabricated via Pleurotus sajor-caju mushroom extract, and their potential medical and environmental applications are demonstrated. The biosynthesized ZnONPs were assessed for their antibacterial, anticancer, and biodecolorization potential efficiency. They were also characterized and morphologically analyzed by UV-visible spectroscopy, XRD, FT-IR, FE-SEM, EDX, HR-TEM, Zeta potential, and GC-MS analysis. The UV visible spectrum analysis of synthesized ZnONPs analyzed outcome 354 nm was the SPR peak that the nanoparticles displayed. The characteristic Zn-O bond was indicated by a strong peak in the FT-IR study at 432.05 cm-1. Based on XRD analysis, P. sajor-caju mediated ZnONPs were crystalline nature, with an average nano particle size of 14.21 nm and a polydispersity directory of 0.29. The nanoparticles exhibit modest constancy, as shown by their zeta potential value of - 33.2 mV. The presence of oxygen and zinc was verified by EDX analysis. The ZnONPs were found to be spherical in shape and crystalline nature structure, with smooth surface morphology and a mean particle size of 10 nm using HR-TEM and SAED analysis. The significant antibacterial activity against S. aureus (6.2 ± 0.1), S. mutans (5.4 ± 0.4), and B. subtilis (5.2 ± 0.1 mm) was demonstrated by the synthesized ZnONPs made using mushroom extract. It was discovered that when the concentration of mushroom extract was increased together with synthesized ZnONPs, the bactericidal activity increased considerably. A higher concentration of ZnONPs demonstrated superior antibacterial activity across the ZnONPs ratio tests. The in vitro cytotoxicity assay showed that ZnONPs, even at low doses, had a substantial number of cytotoxic effects on liver cancer cells (LC50 values 47.42 µg/mL). The effectiveness test revealed that acid blue 129 was degraded. The best decolorization of acid blue 129 at 72.57% after 3 h of soaking serves as evidence for the theory that myco-synthesized ZnONPs by P. sajor-caju mushroom can function as catalysts in reducing the dye. The mycosynthesized ZnONPs from P. sajor-caju extract, and its potential for antibacterial, anticancer, and decolorization are in this investigation. The mycosynthesized ZnONPs suggest a novel use for nanoparticles in the creation of environmental and medicinal products.

Antifungal properties and molecular docking of ZnO NPs mediated using medicinal plant extracts

Significant postharvest losses and food safety issues persist in many developing nations, primarily due to fungal activities, including mycotoxin production. In this study, green synthesised zinc oxide nanoparticles (ZnO-NPs) were prepared from leaf extracts of Syzygium cordatum (ZnO 1), Lippia javanica (ZnO 2), Bidens pilosa (ZnO 3), and Ximenia caffra (ZnO 4). Physicochemical characteristics of the ZnO-NPs were determined using X-ray diffraction (XRD), Fourier transmission Infrared spectroscopy and ultraviolet-visible (UV-vis) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD analysis confirmed the presence of a wurtzite crystal structure in the hexagonal shape of the ZnO nanoparticles (NPs), with an average size ranging between 25 and 43 nm. The microscopic examination of the morphology revealed the presence of spherical particles with sizes ranging from 37 to 47 nm in diameter. The antifungal efficacy of the ZnO-NPs was assessed against pathogenic plant fungi, including Botrytis sp. (STEU 7866), Penicillium sp. (STEU 7865), and Pilidiella granati (STEU 7864), using the poisoned food technique. Further antifungal evaluation of the ZnOPs was performed using the broth microdilution assay. A significant interaction between the type of ZnO-NPs and fungal species was observed, with the highest susceptibility in Mucor sp. to ZnO 2, achieving over 50% inhibition. Penicillium sp. also showed high susceptibility to all ZnO-NPs. Molecular docking results confirmed the strong H-bonding interactions of ZnO-NPs with fungal receptors in Mucor sp. and Penicillium sp., Botrytis sp. and P. granati exhibited the least susceptibility. Further tests revealed that ZnO 2 exhibited the highest inhibitory effect on Botrytis sp., with a low minimum inhibitory concentration (MIC) of 25 µg/mL, attributed to its larger positive zeta potential. This study indicates that ZnO NPs, particularly those mediated using Lippia javanica (ZnO 2), have promising potential as effective antifungal agents, which could play a significant role in reducing postharvest decay and losses.

Biosynthesis of bacteriocin BacZY05-silver nanoconjugates and evaluation of their antibacterial properties

Bacteriocins are antimicrobial peptides produced by bacteria to prevent the growth of pathogens. Combining bacteriocins with metal nanoparticles, like silver nanoparticles (AgNPs), has developed into a viable strategy to get over bacteriocin limitations. In this study, bacteriocin BacZY05 was extracted from Bacillus subtilis ZY05 and purified using various techniques. The resulting purified bacteriocin was then combined with silver nanoparticles to form bacteriocin silver nanoconjugates (BacZY05-AgNPs). The physicochemical properties of the BacZY05-AgNPs were characterized using various analytical techniques. The mean diameter of the synthesized AgNPs was approximately 20-60 nm with an oval or spherical shape. The antimicrobial activity of the BacZY05-AgNPs was evaluated against several indicator strains by their zone of inhibition (ZOI), using the agar well diffusion method. Compared to bacteriocin (ZOI- 13 to 20 mm) and AgNPs (ZOI- 10-22 mm) alone, the antibacterial activity data demonstrated a 1.3-1.5-fold increase in the activity of bacteriocin-nanoconjugates (ZOI- 22 to 26 mm). For Staphylococcus aureus MTCC3103 and Klebsiella pneumoniae MTCC109, BacZY05-capped AgNPs exhibited the lowest minimum inhibitory concentration (MIC), measuring 10.93 µg/mL. For Salmonella typhi NCIM2501, the MIC was 28.75 µg/mL. The highest MIC value was 57.5 µg/mL for Escherichia coli DH5α and Vibrio cholerae MTCC3909. With BacZY05-capped AgNPs, the lowest minimum bactericidal concentration (MBC) of 28.75 µg/mL was observed for Staphylococcus aureus MTCC31003. In the cases of Salmonella typhi NCIM2501 and Klebsiella pneumoniae MTCC109 concentration was 57.5 µg/mL. Vibrio cholerae MTCC3909 and Escherichia coli DH5α had the highest MBC values at 115 µg/mL.

Anticandidal applications of selenium nanoparticles biosynthesized with Limosilactobacillus fermentum (OR553490)

Candida albicans is one of the most dangerous pathogenic fungi in the world, according to the classification of the World Health Organization, due to the continued development of its resistance to currently available anticandidal agents. To overcome this problem, the current work provided a simple, one-step, cost-effective, and safe technique for the biosynthesis of new functionalized anticandidal selenium nanoparticles (Se NPs) against C. albicans ATCC10231 using the cell-free supernatant of Limosilactobacillus fermentum (OR553490) strain. The bacterial strain was isolated from yogurt samples available in supermarkets, in Damietta, Egypt. The mixing ratio of 1:9 v/v% between cell-free bacterial metabolites and sodium selenite (5 mM) for 72 h at 37 °C were the optimum conditions for Se NPs biosynthesis. Ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray diffraction (XRD), Zeta analyses, and elemental analysis system (EDS) were used to evaluate the optimized Se NPs. The Se NPs absorption peak appeared at 254 nm. Physicochemical analysis of Se NPs revealed the crystalline-shaped and well-dispersed formation of NPs with an average particle size of 17-30 nm. Se NPs have - 11.8 mV, as seen by the zeta potential graph. FT-IR spectrum displayed bands of symmetric and asymmetric amines at 3279.36 cm-1 and 2928.38 cm-1, aromatic and aliphatic (C-N) at 1393.32 cm-1 and 1237.11.37 cm-1 confirming the presence of proteins as stabilizing and capping agents. Se NPs acted as a superior inhibitor of C. albicans with an inhibition zone of 26 ± 0.03 mm and MIC value of 15 µg/mL compared to one of the traditional anticandidal agent, miconazole, which revealed 18 ± 0.14 mm and 75 µg/mL. The cytotoxicity test shows that Se NPs have a low toxic effect on the normal keratinocyte (IC50 ≈ 41.5 μg/mL). The results indicate that this green synthesis of Se NPs may have a promising potential to provide a new strategy for drug therapy.

Enhanced Biocompatibility by Evaluating the Cytotoxic and Genotoxic Effects of Magnetic Iron Oxide Nanoparticles and Chitosan on Hepatocellular Carcinoma Cells (HCC)

Hepatocellular carcinoma (HCC), the fifth most prevalent cancer worldwide, is influenced by a myriad of clinic-pathological factors, including viral infections and genetic abnormalities. This study delineates the synthesis, characterization, and the biological efficacy of iron oxide nanoparticles (Fe3O4) and chitosan-coated iron oxide nanoparticles (Fe3O4-CS) against HCC. Analytical methods confirmed the successful synthesis of both nanoparticles, with Fe3O4-CS demonstrating a smaller, uniform spherical morphology and distinct surface and magnetic properties attributable to its chitosan coating. The prepared materials were analyzed using various techniques, and their potential cytotoxic effects on HepG2 cancer cells line for HCC were investigated. In biological evaluations against HepG2 cells, a notable distinction in cytotoxicity was observed. Fe3O4 showed modest anticancer activity with an IC50 of 383.71 ± 23.9 µg/mL, whereas Fe3O4 exhibited a significantly enhanced cytotoxic effect, with a much lower IC50 of 39.15 ± 39.2 µg/mL. The Comet assay further evidenced Fe3O4-CS potent DNA damaging effect, showcasing its superior ability to induce apoptosis through extensive DNA fragmentation. Biochemical analyses integrated into our results reveal that Fe3O4-CS not only induces significant DNA damage but also markedly alters oxidative stress markers. Compared to control and Fe3O4-treated cells, Fe3O4-CS exposure significantly elevated levels of oxidative stress markers: superoxide dismutase (SOD) increased to 192.07 U/ml, catalase (CAT) decreased to 0.03 U/L, glutathione peroxidase (GPx) rose dramatically to 18.76 U/gT, and malondialdehyde (MDA) levels heightened to 30.33 nmol/gT. These results underscore the potential of Fe3O4-CS nanoparticles not only in inducing significant DNA damage conducive to cancer cell apoptosis but also in altering enzymatic activities and oxidative stress markers, suggesting a dual mechanism of action that may underpin their therapeutic advantage in cancer treatment. Our findings advocate for the further exploration of Fe3O4-CS nanoparticles in the development of anticancer drugs, emphasizing their capability to trigger oxidative stress and enhance antioxidant defense mechanisms.

Chitosan nanocomposites as a nano-bio tool in phytopathogen control

Chitosan, an economically viable and versatile biopolymer, exhibits a wide array of advantageous physicochemical and biological properties. Chitosan nanocomposites, formed by the amalgamation of chitosan or chitosan nanoparticles with other nanoparticles or materials, have garnered extensive attention across agricultural, pharmaceutical, and biomedical domains. These nanocomposites have been rigorously investigated due to their diverse applications, notably in combatting plant pathogens. Their remarkable efficacy against phytopathogens has positioned them as a promising alternative to conventional chemical-based methods in phytopathogen control, thus exploring interest in sustainable agricultural practices with reduced reliance on chemical interventions. This review aims to highlight the anti-phytopathogenic activity of chitosan nanocomposites, emphasizing their potential in mitigating plant diseases. Additionally, it explores various synthesis methods for chitosan nanoparticles to enhance readers' understanding. Furthermore, the analysis delves into elucidating the intricate mechanisms governing the antimicrobial effectiveness of these composites against bacterial and fungal phytopathogens.

Bioinformatics, expression analysis, and functional verification of allene oxide synthase gene HvnAOS1 and HvnAOS2 in qingke

Allene oxide synthase (AOS) is a key enzyme involved in the jasmonic acid (JA) synthesis pathway in plants. To explore its function on the regulatory mechanism of JA synthesis, we screened and identified two AOS genes HvnAOS1 and HvnAOS2 in qingke. Both HvnAOS1 and HvnAOS2 contained conserved heme-binding motif, which is most closely related to AtsAOS2, indicating controlled dehydration of fatty acid hydroperoxides to allene oxides. Molecular docking simulations identified the key amino acid sites that were important for heme binding and interaction with 13(S)-HPOT, respectively. The expression pattern also indicated that HvnAOS1 and HvnAOS2 were highly induced by JA, abscisic acid, and salicylic acid. Subcellular localization of HvnAOS1 and HvnAOS2 using transient expression of Agrobacterium tumefaciens showed the green fluorescent protein signal in the cell cytoplasm of the N. benthamiana leaves. Overexpression of HvnAOS1 and HvnAOS2 in Arabidopsis aos mutant restored male fertility and plant resistance to Botrytis cinerea, indicating that HvnAOS1 and HvnAOS2 can restore the functions of AOS in Arabidopsis aos mutant.

Tiny but Mighty: Nanoscale Materials in Plant Disease Management

Nanoscale materials are promising tools for managing plant diseases and are becoming important players in the current agritech revolution. However, adopting modern methodologies requires a broad understanding of their effectiveness in solving target problems and their effects on the environment and food chain. Furthermore, it is paramount that such technologies are mechanistically and economically feasible for growers to adopt in order to be sustainable in the long run. This Feature Article summarizes the latest findings on the role of nanoscale materials in managing agricultural plant pathogens. Herein, we discussed the benefits and limitations of using nanoscale materials in plant disease management and their potential impacts on the environment and global food security.

Synthesis of iron oxide nanoparticles using orange fruit peel extract for efficient remediation of dye pollutant in wastewater

The removal of color-causing compounds from wastewater is a significant challenge that industries encounter due to their toxic, carcinogenic, and harmful properties. Despite the extensive research and development of various techniques with the objective of effectively degrading color pollutants, the challenge still persists. This paper introduces a simple technique for producing iron oxide nanoparticles (Fe2O3 NPs) using orange fruit peel for sustainable dye degradation in aqueous environment. The observation of color change and the measurement of UV-visible absorbance at 240 nm provided a confirmation for the development of Fe2O3 NPs. Transmission electron microscopy examination demonstrated that the Fe2O3 NPs have an agglomerated distribution and forming spherical structures with size ranging from 25-80 nm. Energy-dispersive X-ray spectroscopy analysis supported the existence of Fe and O. Fourier transform infrared spectroscopy conducted to investigate the involvement of orange peel extract in the reduction, capping, and synthesis of Fe2O3 NPs from the precursor salt. Fe2O3 NPs showed a photocatalytic remediation of 97%, for methylene blue under visible light irradiation. Additionally, prepared NPs exhibited concentration depended biofilm inhibition action against E. coli and S. aureus. In conclusion, Fe2O3 NPs can efficiently purify water and suppress pathogens due to their strong degrading activity, reusability, and biofilm inhibition property.

Experimental and density functional theory studies on some metal oxides and the derived nanoclusters: a comparative effects on human ferritin

A comprehensive investigation into the green synthesis of metal oxide nanoparticles (NPs) has garnered significant attention due to its commendable reliability, sustainability, and environmentally friendly attributes. Green synthesis methods play a crucial role in mitigating the adverse effects associated with conventional approaches employed for nanostructure preparation. This research endeavors to examine the impact of ginger plant extract-assisted green synthesis of metal oxides NPs on the serum ferritin levels of anemic diabetic patients in vitro, focusing specifically on α-Fe2O3 and ZnO NPs. Sixty diabetic volunteers with anemia (35-50 years) and thirty healthy volunteers were enrolled as controls. The assessment was conducted using the VIDAS Ferritin (FER) assay. Photoluminescence (PL) spectroscopy measurements were performed to elucidate the intrinsic and extrinsic transitions of these NPs, affirming the successful formation of α-structured iron oxide. Density functional theory (DFT) calculations were carried out at the B3LYP/6-311++G(d,2p) level of theory to investigate the geometry optimization and molecular electrostatic potential maps of the NPs. Furthermore, TD-DFT calculations were employed to explore their frontier molecular orbitals and various quantum chemical parameters. The binding affinity and interaction types of ZnO and α-Fe2O3 NPs to the active site of the human H-Chain Ferritin (PDB ID: 2FHA) target were determined with the help of molecular docking. Results unveiled the crystalline structure of ZnO and the α-structure of α-Fe2O3. Analysis of the frontier molecular orbitals and dipole moment values demonstrated that ZnO (total dipole moment (D) = 5.80 µ) exhibited superior chemical reactivity, biological activity, and stronger molecular interactions with diverse force fields compared to α-Fe2O3 (D = 2.65 µ). Molecular docking of the metal oxides NPs with human H-chain ferritin provided evidence of robust hydrogen bond interactions and metal-acceptor bonds between the metal oxides and the target protein. This finding could have a great impact on using metal oxides NPs-ferritin as a therapeutic protein, however, further studies on their toxicity are required.

Physiochemical Responses and Ecological Adaptations of Peach to Low-Temperature Stress: Assessing the Cold Resistance of Local Peach Varieties from Gansu, China

In recent years, extreme weather events have become increasingly frequent, and low winter temperatures have had a significant impact on peach cultivation. The selection of cold-resistant peach varieties is an effective solution to mitigate freezing damage. To comprehensively and accurately evaluate the cold resistance of peaches and screen for high cold resistance among Gansu local resources, nine different types of peach were selected as test resources to assess physiological, biochemical, and anatomical indices. Subsequently, 28 peach germplasms were evaluated using relevant indices. The semi-lethal temperature (LT50) was calculated by fitting the change curve of the electrolyte leakage index (ELI) with the Logistic equation; this can be used as an important index for identifying and evaluating the cold resistance of peach trees. The LT50 values ranged from -28.22 °C to -17.22 °C among the 28 tested resources; Dingjiaba Liguang Tao exhibited the lowest LT50 value at -28.22 °C, indicating its high level of cold resistance. The LT50 was positively correlated with the ELI and malondialdehyde (MDA) content with correlation coefficients of 0.894 and 0.863, respectively, while it was negatively correlated with the soluble sugar (SS), soluble protein (SP), and free proline (Pro) contents with correlation coefficients of -0.894, -0.721, and -0.863, respectively. The thicknesses of the xylem, cork layer, cork layer ratio (CLR) and thickness/cortex thickness (X/C) showed negative correlations (-0.694, -0.741, -0.822, -0.814, respectively). Finally, the membership function method was used to evaluate cold resistance based on the ELI, MDA, Pro, SP, SS, CLR, and xylem thickness/cortex thickness (X/C) indices. The average membership degree among all tested resources ranged from 0.17 to 0.61. Dingjiaba Liguang Tao emerged prominently in terms of high-cold-resistance (HR) membership value (0.61).

Bioinformatics study of phytase from Aspergillus niger for use as feed additive in livestock feed

BACKGROUND

Phytase supplementation in rations can reduce their phytic acid composition in order to enhance their nutritional value. Aspergillus niger is a fungus that can encode phytase. This study aims to determine the characteristics of its DNA sequences and amino acid composition that encode the phytase enzyme, as well as to determine the primer designs.

METHOD

This study used gene sequence data and protein-encoding phytase from Aspergillus niger that was collected manually from NCBI and PDB. The data was analyzed using SPDBV and then be aligned using the ClustalW Multiple Alignment features. The phylogenetic tree was built by Mega11 software. Primers were designed from selected candidate sequences that were analyzed. The designed primers were then simulated for PCR using FastPCR and SnapGene software.

RESULTS

There are 18 Aspergillus niger phytases in NCBI which is 14.87% of the total Aspergillus. There are 14 Aspergillus niger phytases that have identity above 95%. Aspergillus niger 110. M94550.1 is the closest strain to the PDB template. Candidate sources of phytase genes are Aspergillus niger 110.M94550.1, 48.2.BCMY01000003.1, and 92.JQ654450.1. The primer design has 2 possibilities of self-annealing and high melting temperature on the reverse primer. PCR simulation shows that the primer design can attach completely but still has the possibility of mispriming.

CONCLUSION

This study suggests promising results for the future development of phytase enzyme production from Aspergillus niger as a feed additive using genetic engineering to enhance the quality of livestock feed in Indonesia.

Synthesis, nanostructuring and in silico studies of a new imine bond containing a macroheterocycle as a promising PBP-2a non-β-lactam inhibitor

This study is devoted to the synthesis of a 40-membered macroheterocycle with its further nanostructuring by magnetite nanoparticles. The mentioned macroheterocycle was synthesized by the [2+2] cyclocondensation of the oxygen-containing diamine with an aromatic dialdehyde in a non-catalytic medium and with no work-up procedure. The structure of the obtained macroheterocycle was studied by 1H and 13C nuclear magnetic resonance spectroscopy and matrix-assisted laser desorption/ionization-time of flight mass spectrometry. Furthermore, the nanosupramolecular complex of macroheterocycles with magnetite nanoparticles was obtained and investigated by Fourier-transform infrared and ultraviolet-visible spectroscopy methods. Shifts in the infrared spectra of the nanosupramolecular complex indicate the interaction through metal-aromatic ring non-covalent bonding. The shift is also observed for the C-O-C stretching band of ether bonds. The loading rate of macroheterocycles on magnetite nanoparticles was 18.6%. The morphology of the ensemble was studied by transmission electron microscopy, which confirmed the synthesis of nanospherical particles with a diameter range of 10-20 nm. Powder X-ray diffraction analysis showed patterns of cubic Fe3O4 nanoparticles with a crystallite size equal to 9.1 nm. The macroheterocycle and its nanosupramolecular complex were tested against Klebsiella pneumoniae, Pseudomonas aeruginosa and Staphylococcus aureus. The results have shown that the created complex has shown 64 times better activity against Staphylococcus aureus in comparison with the individual macroheterocycle and 32 times better activity in comparison with the pristine antibiotic Ampicillin as a control. In addition, computational analysis of the macroheterocycle was performed at the B3LYP/6-31G level in water. Molecular docking analyses for the macroheterocycle revealed Penicillin-binding protein PBP2a (5M18) from the transpeptidase family as a target protein in Staphylococcus aureus.

Chitosan-based nanocomposites as coatings and packaging materials for the postharvest improvement of agricultural product: A review

The perishability nature of harvested fruits and vegetables, along with the effect of environmental factors, storage conditions, and transportation, reduce the products' quality and shelf-life. Considerable efforts have been allocated to alternate conventional coatings based on new edible biopolymers for packaging. Chitosan is an attractive alternative to synthetic plastic polymers due to its biodegradability, antimicrobial activity, and film-forming properties. However, its conservative properties can be improved by adding active compounds, limiting microbial agents' growth and biochemical and physical damages, and enhancing the stored products' quality, shelf-life, and consumer acceptability. Most of the research on chitosan-based coatings focuses on antimicrobial or antioxidant properties. Along with the advancement of polymer science and nanotechnology, novel chitosan blends with multiple functionalities are required and should be fabricated using numerous strategies, especially for application during storage. This review discusses recent developments in using chitosan as a matrix to fabricate bioactive edible coatings and their positive impacts on increasing the quality and shelf-life of fruits and vegetables.

Influence of Nano-Chitosan Loaded with Potassium on Potassium Fractionation in Sandy Soil and Strawberry Productivity and Quality

Under sandy soil conditions, increasing the efficiency of potassium (K) fertilizers is considered to be a major limiting factor for improving the productivity and quality of fruit crops. In this context, utilizing nanotechnology has emerged as a novel technique to increase the efficiency of K applications. In our study, two field trials were conducted, in two consecutive seasons (2019/2020 and 2020/2021), to compare the effects of nano-chitosan loaded with K as a foliar treatment with those of conventional soil applications of K on plant growth, yield, and quality of strawberry plants grown in sandy soil. Strawberry plants were treated with 12 different treatments, which were replicated three times in a randomized complete block design in each growing season. Potassium sulfate (K2SO4, 48% K2O) was applied to the soil at a rate of 150.0 kg acre−1 (recommended rate, 100%). Meanwhile, the spraying of nano-chitosan loaded with K was applied at 1000 mg L−1 as a control. In addition, K2SO4 was applied either individually or in combination at the rate of 112.5 or 75.0 kg acre−1 with four nano-chitosan-K dosages (250, 500, 750, and 1000 mg L−1). After harvesting, soil samples were collected and prepared to determine K fractions. As well, plant samples were collected to determine the vegetative growth parameters and the foliage content of NPK and chlorophyll. Eventually, the yield traits and quality parameters were evaluated. A principal component analysis was conducted to determine the interrelationships of the treatments’ averages and their effects on yield components and quality traits. A combined analysis was performed for the two studied seasons and the values were the mean of six replications. The results indicated that the application of common K fertilizer (150.0 kg K2SO4 acre−1) resulted in the maximum increase in soluble and exchangeable K in the soil, which was comparable to those observed with 112.5 kg K2SO4 acre−1 + 1000 mg L−1 nano-chitosan-K and 112.5 K2SO4 acre−1 + 750 mg L−1 nano-chitosan-K. The total yield, marketable yield, and fruit firmness were all significantly increased by the latter two treatments compared to the control group. Furthermore, plots treated with 112.5 kg K2SO4 acre−1 + 1000 mg L−1 nano-chitosan-K significantly increased the total soluble solids, vitamin C levels, acidity, total sugar, and anthocyanin levels in strawberry fruits. In conclusion, under sandy soil conditions, the utilization of nanoparticles could be an indispensable tool for manipulating fertilization management when cultivating strawberries. The K status of the soil was improved by applying 75% of the recommended dose of mineral K in combination with 1000 or 750 mg L−1 of nano-chitosan-K, without compromising strawberry yield or quality.

Fabrication of Naturally Derived Chitosan and Ilmenite Sand-Based TiO2/Fe2O3/Fe-N-Doped Graphitic Carbon Composite for Photocatalytic Degradation of Methylene Blue under Sunlight

Fabrication of chitosan and ilmenite sand-based novel photocatalysts through the catalytic graphitization of chitosan is reported. Nanocomposites consisted of TiO2, Fe2O3 and Fe nanoparticles dispersed on a nitrogen-doped graphitic carbon framework. The surface area, pore volume and macropore structure of the carbon matrix is disturbed by the heterogeneously distributed nanoparticles. The extent of graphitization expanded with increasing metal loading as indicated by variation in the ID/IG ratio. The nanomaterial’s surface consists of Fe3+ and Ti4+, and graphitic, pyridinic and pyrrolic nitrogen were found in the carbon matrix. The band gap values of the composites varied in the 2.06–2.26 eV range. The photocatalytic activity of the synthesized nanomaterials was determined, and the highest rate constant for the photodegradation of methylene blue under sunlight was 4.4 × 10−3 min−1, which resulted with 10 mg/L MB and 25 mg of the best-performing catalyst. The rate constant rose with increasing concentrations of persulfate added to the medium. The rate constant greatly diminished with the addition of isopropyl alcohol as it scavenged hydroxyl radicals. The presence of co-pollutants including Pb2+, rhodamine B, PO43− and Cl− curtailed the rate of reaction. The activity reduced with an increasing number of uses of the catalyst.

Biostimulant and Elicitor Responses to Cricket Frass (Acheta domesticus) in Tomato (Solanum lycopersicum L.) under Protected Conditions

Agriculture in the current century is seeking sustainable tools in order to generate plant production systems with minimal negative environmental impact. In recent years it has been shown that the use of insect frass is an option to be used for this purpose. The present work studied the effect of low doses (0.1, 0.5, and 1.0% w/w) of cricket frass (Acheta domesticus) in the substrate during the cultivation of tomatos under greenhouse conditions. Plant performance and antioxidant enzymatic activities were measured in the study as explicative variables related to plant stress responses in order to determine possible biostimulant or elicitor effects of cricket frass treatments during tomato cultivation under greenhouse conditions. The main findings of this study indicated that tomato plants responded in a dose dependent manner to cricket frass treatments, recalling the hormesis phenomenon. On the one hand, a 0.1% (w/w) cricket frass treatment showed typical biostimulant features, while on the other hand, 0.5 and 1.0% treatments displayed elicitor effects in tomato plants under evaluated conditions in the present study. These results support the possibility that low doses of cricket frass might be used in tomato cultivation (and perhaps in other crops) for biostimulant/elicitor input into sustainable production systems.

Biosorption of Cadmium and Lead by Dry Biomass of Nostoc sp. MK-11: Kinetic and Isotherm Study

Cadmium (Cd) and lead (Pb) are global environmental pollutants. In this study, Nostoc sp. MK-11 was used as an environmentally safe, economical, and efficient biosorbent for the removal of Cd and Pb ions from synthetic aqueous solutions. Nostoc sp. MK-11 was identified on a morphological and molecular basis using light microscopic, 16S rRNA sequences and phylogenetic analysis. Batch experiments were performed to determine the most significant factors for the removal of Cd and Pb ions from the synthetic aqueous solutions using dry Nostoc sp. MK1 biomass. The results indicated that the maximum biosorption of Pb and Cd ions was found under the conditions of 1 g of dry Nostoc sp. MK-11 biomass, 100 mg/L of initial metal concentrations, and 60 min contact time at pH 4 and 5 for Pb and Cd, respectively. Dry Nostoc sp. MK-11 biomass samples before and after biosorption were characterized using FTIR and SEM. A kinetic study showed that a pseudo second order kinetic model was well fitted rather than the pseudo first order. Three isotherm models Freundlich, Langmuir, and Temkin were used to explain the biosorption isotherms of metal ions by Nostoc sp. MK-11 dry biomass. Langmuir isotherm, which explains the existence of monolayer adsorption, fitted well to the biosorption process. Considering the Langmuir isotherm model, the maximum biosorption capacity (q_max) of Nostoc sp. MK-11 dry biomass was calculated as 75.757 and 83.963 mg g^-1 for Cd and Pb, respectively, which showed agreement with the obtained experimental values. Desorption investigations were carried out to evaluate the reusability of the biomass and the recovery of the metal ions. It was found that the desorption of Cd and Pb was above 90%. The dry biomass of Nostoc sp. MK-11 was proven to be efficient and cost-effective for removing Cd and especially Pb metal ions from the aqueous solutions, and the process is eco-friendly, feasible, and reliable.

Chitosan Spraying Enhances the Growth, Photosynthesis, and Resistance of Continuous Pinellia ternata and Promotes Its Yield and Quality

The continuous cropping obstacle has become the key factor that seriously restricts the growth, yield, and quality of Pinellia ternata. In this study, the effects of chitosan on the growth, photosynthesis, resistance, yield, and quality of the continuous cropping of P. ternata were investigated by two field spraying methods. The results indicate that continuous cropping significantly (p < 0.05) raised the inverted seedling rate of P. ternata and inhibited its growth, yield, and quality. Spraying of 0.5~1.0% chitosan effectively increased the leaf area and plant height of continuous P. ternata, and reduced its inverted seedling rate. Meanwhile, 0.5~1.0% chitosan spraying could notably increase its photosynthetic rate (Pn), intercellular carbon dioxide concentration (Ci), stomatal conductance (Gs), and transpiration rate (Tr), and decrease its soluble sugar, proline (Pro), and malonaldehyde (MDA) contents, as well as promoting its superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) activities. Additionally, 0.5~1.0% chitosan spraying could also effectively enhance its yield and quality. This finding highlights that chitosan can be proposed as an alternative and practicable mitigator for alleviating the continuous cropping obstacle of P. ternata.

A New Species of Neoscytalidium hylocereum sp. nov. Causing Canker on Red-Fleshed Dragon Fruit (Hylocereus polyrhizus) in Southern Thailand

During 2020-2021, cultivated red-fleshed dragon fruit (Hylocereus polyrhizus) in Phatthalung province, southern Thailand, was infected with canker disease in all stages of growth. Small, circular, sunken, orange cankers first developed on the cladodes of H. polyrhizus and later expanded and became gray scabs with masses of pycnidia. The fungi were isolated using the tissue transplanting method and identified based on the growth of the fungal colony, and the dimensions of the conidia were measured. Their species level was confirmed with the molecular study of multiple DNA sequences, and their pathogenicity was tested using the agar plug method. Morphological characterization and molecular identification of the internal transcribed spacer (ITS), translation elongation factor 1-α (tef1-α) and β-tubulin (tub) sequences revealed the fungal pathogen to be a new species. It was named Neoscytalidium hylocereum sp. nov. The biota of the new species, N. hylocereum, was deposited in Mycobank, and the species was assigned accession number 838004. The pathogenicity test was performed to fulfil Koch's postulates. N. hylocereum showed sunken orange cankers with a mass of conidia similar to those observed in the field. To our knowledge, this is the first report of H. polyrhizus as a host of the new species N. hylocereum causing stem cankers in Thailand.

Biocompatible formulations based on mycosynthesized iron oxide nanoparticles: Fabrication, characterization, and biological investigation

The current study was carried out to synthesize iron oxide nanoparticles (IONPs) via green reduction method from a wild mushroom collected from Quaid-i-Azam University, Islamabad, Pakistan. The collected fungus was identified as Daedalea sp. based on morphological characteristics. Prepared NPs were produced from iron chloride hexahydrate with fungal filtrate via combustion method. The as prepared NPs were characterized by using different techniques for example, scanning electron microscopy (SEM), X-ray diffractions (XRD), Fourier transform infrared spectroscopy (FT-IR), and ultraviolet visible (UV-Vis) spectroscopy. Morphology and size of the NPs were determined by SEM analysis. XRD study revealed crystalline nature of IONPs. The FT-IR spectrum exhibited peak at 3390.26 cm^{- 1} stretching that described the strong O-H band of the alcohol associated with mushroom texture. The major IONPs dose (0.75 mg/ml) demonstrated 71% growth inhibition against Aspergillus. Excellent antibacterial activities against Pseudomonas aeruginosa (28 mm), and Klesbsilla pneumonia (28 mm) were represented by the fabricated NPs. Further, highest reducing power (53.22 ± 0.72 µg AAE/mg) was shown by the highest administrated dose (400 µg/ml). Maximum 2,2-diphenyl-1-picrylhydrazyl and trolox antioxidant activity free radical scavenging activities at 400 µg/ml IONPs concentration were noted as 51.29 ± 0.48, and 83.12 ± 0.28 trolox equivalent antioxidant capacity, respectively. In brief, the negligible hemolytic activity against human red blood cells at the highest concentration (400 µg/ml), as well as, moderate antioxidant activities at low concentration suggest the application of the fabricated NPs in environmentally sound viable hygiene production.

Synthesis and Characterization of Citric Acid-Modified Iron Oxide Nanoparticles Prepared with Electrohydraulic Discharge Treatment

Chemical co-precipitation from ferrous and ferric salts at a 1:1.9 stoichiometric ratio in NH₄OH base with ultrasonication (sonolysis) in a low vacuum environment has been used for obtaining colloidal suspensions of Fe₃O₄ nanoparticles coated with citric acid. Before coating, the nanoparticles were processed by electrohydraulic discharges with a high discharge current (several tens of amperes) in a water medium using a pulsed direct current. Magnetite nanoparticles were obtained with an average crystallite diameter D = 25-28 nm as obtained by XRD and particle sizes of 25 nm as measured by small-angle X-ray scattering. Magnetometry showed that all samples were superparamagnetic. The saturation magnetization for the citric acid covered samples after electrohydraulic processing showed higher value (58 emu/g) than for the directly coated samples (50 emu/g). Ultraviolet-visible spectroscopy and Fourier transform infrared spectroscopy showed the presence and binding of citric acid to the magnetite surface by chemisorption of carboxylate ions. Hydrodynamic sizes obtained from DLS and zeta potentials were 93 and 115 nm, -26 and -32 mV for the citric acid covered nanoparticles and 226 nm and 21 mV for the bare nanoparticles, respectively. The hydraulic discharge treatment resulted in a higher citric acid coverage and better particle dispersion. The developed method can be used in nanoparticle synthesis for biomedical applications.

Antibacterial Pathways in Transition Metal-Based Nanocomposites: A Mechanistic Overview

Across the planet, outbreaks of bacterial illnesses pose major health risks and raise concerns. Photodynamic, photothermal, and metal ion release effects of transition metal-based nanocomposites (TMNs) were recently shown to be highly effective in reducing bacterial resistance and upsurges in outbreaks. Surface plasmonic resonance, photonics, crystal structures, and optical properties of TMNs have been used to regulate metal ion release, produce oxidative stress, and generate heat for bactericidal applications. The superior properties of TMNs provide a chance to investigate and improve their antimicrobial actions, perhaps leading to therapeutic interventions. In this review, we discuss three alternative antibacterial strategies based on TMNs of photodynamic therapy, photothermal therapy, and metal ion release and their mechanistic actions. The scientific community has made significant efforts to address the safety, effectiveness, toxicity, and biocompatibility of these metallic nanostructures; significant achievements and trends have been highlighted in this review. The combination of therapies together has borne significant results to counter antimicrobial resistance (4-log reduction). These three antimicrobial pathways are separated into subcategories based on recent successes, highlighting potential needs and challenges in medical, environmental, and allied industries.

Phenolic Compounds in Active Packaging and Edible Films/Coatings: Natural Bioactive Molecules and Novel Packaging Ingredients

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products.

Melatonin Function and Crosstalk with Other Phytohormones under Normal and Stressful Conditions

Melatonin was discovered in plants in the late nineties, but its role, signaling, and crosstalk with other phytohormones remain unknown. Research on melatonin in plants has risen dramatically in recent years and the role of this putative plant hormone under biotic and abiotic stress conditions has been reported. In the present review, we discuss the main functions of melatonin in the growth and development of plants, its role under abiotic stresses, such as water stress (waterlogging and drought), extreme temperature (low and high), salinity, heavy metal, and light-induced stress. Similarly, we also discuss the role of melatonin under biotic stresses (antiviral, antibacterial, and antifungal effects). Moreover, the present review meticulously discusses the crosstalk of melatonin with other phytohormones such as auxins, gibberellic acids, cytokinins, ethylene, and salicylic acid under normal and stressful conditions and reports melatonin receptors and signaling in plants. All these aspects of melatonin suggest that phytomelatonin is a key player in crop improvement and biotic and abiotic stress regulation.

Silver Nanoparticles Biocomposite Films with Antimicrobial Activity: In Vitro and In Vivo Tests

Overuse of antimicrobials by the population has contributed to genetic modifications in bacteria and development of antimicrobial resistance, which is very difficult to combat nowadays. To solve this problem, it is necessary to develop new systems for the administration of antimicrobial active principles. Biocomposite systems containing silver nanoparticles can be a good medical alternative. In this context, the main objective of this study was to obtain a complex system in the form of a biocomposite film with antimicrobial properties based on chitosan, poly (vinyl alcohol) and silver nanoparticles. This new system was characterized from a structural and morphological point of view. The swelling degree, the mechanical properties and the efficiency of loading and release of an anti-inflammatory drug were also evaluated. The obtained biocomposite films are biocompatibles, this having been demonstrated by in vitro tests on HDFa cell lines, and have antimicrobial activity against S. aureus. The in vivo tests, carried out on rabbit subjects, highlighted the fact that signs of reduced fibrosis were specific to the C2P4.10.Ag1-IBF film sample, demonstrated by: intense expression of TNFAIP8 factors; as an anti-apoptotic marker, MHCII that favors immune cooperation among local cells; αSMA, which marks the presence of myofibroblasts involved in approaching the interepithelial spaces for epithelialization; and reduced expression of the Cox2 indicator of inflammation, Col I.

Molecular Identification of Zantedeschia Culture with Determination of Its Morphometric and Metabolic Activities for Mediterranean Acclimatization

Calla lily (Zantedeschia albomaculata (Hook.) Baill.) is an herbaceous or semi-evergreen perennial grown from rhizomes. It is commonly named “Spotted Arum”. Ribosomal RNAs (rRNAs) are found in all known organisms and are known for being functionally equivalent in all of them. A completely new in vitro culture protocol was applied to Z. albomaculata with two hormones, 6-Benzylaminopurine (BAP) and kinetin, to obtain full growth and multiplication. Due to their highly conserved sequences, the analysis of small-subunit rRNAs (16S–18S rRNAs) can provide precise statistical evaluation of a wide variety of phylogenetic connections. As a result, the plant’s 18S rRNA gene allowed for identification and partial sequencing. Also, the traditional floral method and the novel application technique for identification were applied to Z. albomaculata. In this paper we systemically describe the structural strategies of the plant’s adaptation to the surroundings at the morphological, physiological, and anatomical scale. Most the essential oils and fatty acids found in Z. albomaculata are omega fatty acids, octadecenoic acid, linoleic acid, and palmitic acid. All these fatty acids have industrial, medicinal, and pharmaceutical applications. The significant findings are the spadix sheathing leaves, and the precipitation of raphides calcium oxalate. The mitotic index showing the division activity was recorded, and it was 17.4%. The antimicrobial activity of Z. albomaculata ethanol extract was performed via the well diffusion method. This extract has shown high activity against Escherichia coli and Pseudomonas aeruginosa, compared to its lower activity against Bacillus cereus. By defining these characteristics and in vitro culture conditions, we will be able to acclimatize the plant in greenhouses, and then transfer it to the open field. The findings of this work identified the general characteristics of Zantedeschia albomaculata as an ornamental and medicinal plant in order to acclimatize this plant for cultivation in the Mediterranean climate.

Controlled atmosphere storage alleviates internal browning in flat peach fruit by regulating energy and sugar metabolisms

Flat peach fruit are cold-sensitive and vulnerable to chilling injury (CI), particularly internal browning (IB) during cold storage, which limits the consumer acceptance and market value of the fruit. Controlled atmosphere (CA) has been used to alleviate IB in fruit. However, the mechanisms of CA on IB in peach remains unknown. This study investigated the effects of CA (3-3.5% Oxygen, 3-3.5% Carbon dioxide, and 93-94% nitrogen) treatment on IB development, sugar metabolism, and energy metabolism in cold-stored (1 ± 0.5 °C) peach. The CA treatment effectively inhibited the development of IB and markedly inhibited the reduction of sugar contents and energy charge. The protein expression of the V-type proton ATPase subunit was significantly inhibited by the CA treatment, accompanied by higher adenosine triphosphate (ATP) content, and energy charge than the control fruit. Notably, the expressions of the pyruvate kinase family of proteins, pyruvate decarboxylases, and sucrose synthase were induced by CA treatment that had complex protein interactions with the ATPase and the energy metabolism pathway. These results indicated that CA treatment enhanced the chilling tolerance attributed to maintaining higher levels of energy status and sugar contents by regulating the expression of key proteins involved in energy metabolism during cold storage and shelf life. Taken together, our study can provide theoretical support for the research and development of fresh-keeping and cold-chain logistics technology.

First Report of Fruit Rot of Cherry and Its Control Using Fe2O3 Nanoparticles Synthesized in Calotropis procera

Cherry is a fleshy drupe, and it is grown in temperate regions of the world. It is perishable, and several biotic and abiotic factors affect its yield. During April–May 2021, a severe fruit rot of cherry was observed in Swat and adjacent areas. Diseased fruit samples were collected, and the disease-causing pathogen was isolated on PDA. Subsequent morphological, microscopic, and molecular analyses identified the isolated pathogen as Aspergillus flavus. For the control of the fruit rot disease of cherry, iron oxide nanoparticles (Fe₂O₃ NPs) were synthesized in the leaf extract of Calotropis procera and characterized. Fourier transform infrared (FTIR) spectroscopy of synthesized Fe₂O₃ NPs showed the presence of capping and stabilizing agents such as alcohols, aldehydes, and halo compounds. X-ray diffraction (XRD) analysis verified the form and size (32 nm) of Fe₂O₃ NPs. Scanning electron microscopy (SEM) revealed the spinal-shaped morphology of synthesized Fe₂O₃ NPs while X-ray diffraction (EDX) analysis displayed the occurrence of main elements in the samples. After successful preparation and characterization of NPs, their antifungal activity against A. flavus was determined by poison technique. Based on in vitro and in vivo antifungal activity analyses, it was observed that 1.0 mg/mL concentration of Fe₂O₃ can effectively inhibit the growth of fungal mycelia and decrease the incidence of fruit rot of cherry. The results confirmed ecofriendly fungicidal role of Fe₂O₃ and suggested that their large-scale application in the field to replace toxic chemical fungicides.

Leaf Extracts from Resistant Wild Tomato Can Be Used to Control Late Blight (Phytophthora infestans) in the Cultivated Tomato

Late blight disease, caused by Phytophthora infestans (Mont.) de Bary, is one of the most challenging diseases threatening tomato production and other Solanaceae crops. Resistance to late blight is found in certain wild species, but the mechanism behind the resistance is not fully understood. The aim of this study was to examine the metabolic profiles in the leaf tissue of late blight-resistant wild tomato and to investigate if leaf extracts from such genotypes could be used to control late blight in tomato production. We included three recognized late blight-resistant wild tomato accessions of Solanum habrochaites (LA1777, LA2855, and LA1352) and two recognized highly susceptible genotypes, S. lycopersicum (‘Super Strain B’) and S. pimpinellifolium (LA0375). The metabolic profiles were obtained in both inoculated and non-inoculated plants by analyzing leaf extracts using high-resolution gas chromatography-mass spectrometry (GC-MS) with three replicate analyses of each genotype. We focused on volatile organic compounds (VOCs) and identified 31 such compounds from the five genotypes with a retention time ranging from 6.6 to 22.8 min. The resistant genotype LA 1777 produced the highest number of VOCs (22 and 21 in the inoculated and control plants, respectively), whereas the susceptible genotype ‘Super Strain B’ produced the lowest number of VOCs (11 and 13 in the respective plants). Among the VOCs, 14 were detected only in the resistant genotypes, while two were detected only in the susceptible ones. In vitro trials, with the use of a detached leaflet assay and whole-plant approach, were conducted. We revealed promising insights regarding late blight management and showed that metabolic profiling may contribute to a better understanding of the mechanisms behind P. infestans resistance in tomato and its wild relatives.

Chitosan and Chitooligosaccharide: The Promising Non-Plant-Derived Prebiotics with Multiple Biological Activities

Biodegradable chitin is the second-most abundant natural polysaccharide, widely existing in the exoskeletons of crabs, shrimps, insects, and the cell walls of fungi. Chitosan and chitooligosaccharide (COS, also named chitosan oligosaccharide) are the two most important deacetylated derivatives of chitin. Compared with chitin, chitosan and COS not only have more satisfactory physicochemical properties but also exhibit additional biological activities, which cause them to be widely applied in the fields of food, medicine, and agriculture. Additionally, due to their significant ability to improve gut microbiota, chitosan and COS are deemed prospective prebiotics. Here, we introduced the production, physicochemical properties, applications, and pharmacokinetic characteristics of chitosan and COS. Furthermore, we summarized the latest research on their antioxidant, anti-inflammatory, and antimicrobial activities. Research progress on the prebiotic functions of chitosan and COS is particularly reviewed. We creatively analyzed and discussed the mechanisms and correlations underlying these activities of chitosan and COS and their physicochemical properties. Our work enriched people's understanding of these non-plant-derived prebiotics. Based on this review, the future directions of research on chitosan and COS are explored. Collectively, optimizing the production technology of chitin derivatives and enriching understanding of their biological functions will shed more light on their capability to improve human health.

Green Synthesis of Silver Nanoparticles Using Euphorbia wallichii Leaf Extract: Its Antibacterial Action against Citrus Canker Causal Agent and Antioxidant Potential

Biologically synthesized silver nanoparticles are emerging as attractive alternatives to chemical pesticides due to the ease of their synthesis, safety and antimicrobial activities in lower possible concentrations. In the present study, we have synthesized silver nanoparticles (AgNPs) using the aqueous extract of the medicinal plant Euphorbia wallichii and tested them against the plant pathogenic bacterium Xanthomonas axonopodis, the causative agent of citrus canker, via an in vitro experiment. The synthesized silver nanoparticles were characterized by techniques such as UV-Vis spectroscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction analysis and transmission electron microscopy. Moreover, the plant species were investigated for phenolics, flavonoids and antioxidant activity. The antioxidant potential of the extract was determined against a DPPH radical. The extract was also evaluated for phenolic compounds using the HPLC technique. The results confirmed the synthesis of centered cubic, spherical-shaped and crystalline nanoparticles by employing standard characterization techniques. A qualitative and quantitative phytochemical analysis revealed the presence of phenolics (41.52 mg GAE/g), flavonoids (14.2 mg QE/g) and other metabolites of medicinal importance. Different concentrations (1000 µg/mL to 15.62 µg/mL—2 fold dilutions) of AgNPs and plant extract (PE) alone, and both in combination (AgNPs-PE), exhibited a differential inhibition of X. axanopodis in a high throughput antibacterial assay. Overall, AgNPs-PE was superior in terms of displaying significant antibacterial activity, followed by AgNPs alone. An appreciable antioxidant potential was recorded as well. The observed antibacterial and antioxidant potential may be attributed to eight phenolic compounds identified in the extract. The Euphorbia wallichii leaf-extract-induced synthesized AgNPs exhibited strong antibacterial activity against X. axanopodis, which could be exploited as effective alternative preparations against citrus canker in planta in a controlled environment. In addition, as a good source of phenolic compounds, the plant could be further exploited for potent antioxidants.

Evaluation of probiotics in vegetable juices: tomato (Solanum lycopersicum), carrot (Daucus carota subsp. sativus) and beetroot juice (Beta vulgaris)

Probiotics are known to human kind since ages as they are important component in fermented milk products, however the use of probiotics in non-dairy product is a novel method for the delivery of probiotics. Delivery of probiotics through non-dairy products will be beneficial for consumers who are lactose intolerant who are deprived of benefits of probiotics by dairy products. This studies aim at developing novel vegetable juices containing probiotic bacteria. Three different strains of bacteria have been used, i.e. Lactobacillus plantarum, Lactobacillus acidophilus, Lactobacillus delbrueckii in carrot, beetroot and tomato juice. The viability of the bacteria has been checked after a specific duration of time of fermentation by Koch's plate count method. The vegetable used for juices (carrot, beetroot, tomato) consist of high amount of antioxidants like carotenoids in carrot, betaxanthins and betacyanins in beetroot, lycopene in tomato. These antioxidant provide numerous health benefits to human body. The antioxidant activity in the juices has been checked before and after fermentation by HPLC and spectroscopic methods. The three bacterial strains Lactobacillus plantarum, Lactobacillus acidophilus and Lactobacillus delbrueckii used in three types of juices including tomato juice, carrot juice and beetroot juice showed good growth except Lactobacillus acidophilus due to reasons like insufficient nutrients. The amount of sugars and acids of the three juices indicated that the fermentation process takes place at a good and satisfying rate. This product will be especially useful for the people who are lactose intolerant who cannot intake probiotics via milk and milk products. Vegetable juices also have almost zero fat content and high in fiber so the people who are on a fat free diet can consume this product.

Toxicity and Uptake of CuO Nanoparticles: Evaluation of an Emerging Nanofertilizer on Wheat (Triticum aestivum L.) Plant

Wet chemistry was used to produce copper oxide nanoparticles (CuO NPs). The results indicated that most nanoparticles were bacillus-shaped and relatively uniform in size (less than 30 nm). The effect of synthesized CuO NPs on wheat (Triticum aestivum L.) germination and growth parameters was studied and compared to bulk Cu. The results showed that no significant difference was obtained in germination rate among all treatments. Bulk Cu additions significantly affect the mean germination rate and mean germination time. On the contrary, germinability was significantly affected by CuO NPs additions. Seed vigor index was calculated to demonstrate the superior treatment in wheat germination parameters, and the results confirmed that 0.1 mg L−1 of CuO NPs could be successfully used to improve wheat seed germination. Moreover, the general average Cu concentrations in the plant tissue were 139 and 103 mg kg−1 dry weight for bulk and CuO NPs, respectively, indicating the dissolution behavior of CuO NPs. The addition of CuO NPs (0.1 mg L−1) promotes chlorophyll formation equal to 0.5 mg L−1 of the bulk Cu addition. This means using nanoparticles as fertilizer could reduce 80% of traditional fertilizers. Nonetheless, Cu additions in both forms (NPs and bulk) reduce root growth substantially compared to control. The effective toxic dose (EC50) for bulk Cu and CuO NPs was 0.37 mg L−1 and 0.94 mg L−1, respectively. The results indicated that approximately 2.5 times CuO NPs concentration is equal to the toxicity dose of bulk Cu due to lowered CuO NPs dissolution. Our study showed that Cu phytotoxicity is a non-nanosized effect and showed that plant-induced changes under environmentally real conditions should be considered when measuring the dissolution of CuO NPs near wheat plant roots. This study implies that using nano-CuO as a micronutrient amendment has a potential benefit rather than the soluble Cu salt for plant growth.

A Potential Valorization Strategy of Wine Industry by-Products and Their Application in Cosmetics-Case Study: Grape Pomace and Grapeseed

Grape pomace and grapeseed are agro-industrial by-products, whose inadequate treatment generates socioeconomic and environmental concerns. Nevertheless, it is possible to valorize them by extracting their bioactive compounds, such as antioxidants (phenolic compounds), vitamin E and fatty acids. The bioactive compounds were extracted using solid-liquid extraction. The yields for phenolic compounds were 18.4 ± 0.4% for grape pomace, and 17.4 ± 0.4%, for grapeseed. For the oil, the yields were 13.3 ± 0.2% and 14.5 ± 0.3% for grape pomace and grapeseed. Antioxidant capacity was assessed by the assay with 2,2-diphenyl-1-picrylhydrazyl (DPPH), and showed that phenolic extract has higher antioxidant capacity than the oils. Grape pomace and grapeseed extracts exhibit, correspondingly, values of 90.8 ± 0.8 and 87.5 ± 0.5 of DPPH inhibition and IC₅₀ of 48.9 ± 0.5 and 55.9 ± 0.7 μg_extract·mL_DPPH⁻¹. The antimicrobial capacity was assessed by the disk diffusion test, and revealed that, phenolic extracts inhibit the growth of Staphylococcus aureus and Staphylococcus epidermidis. The obtained extracts were incorporated in 10 face cream formulations, with slight modifications in quantities of formulation stabilizers. Their stability was studied for 35 days, and this revealed the possibility of incorporating extracts and oils obtained from by-products as antioxidants in cosmetics, and replacing synthetic ones. As a future recommendation, microencapsulation of the extracts should be performed, in order to increase their stability.

Commercial techniques for preserving date palm (Phoenix dactylifera) fruit quality and safety: A review

The popularity of date palm (Phoenix dactylifera) fruit is increasing, therefore the demand for high-quality date palm fruit with less or no chemical treatment is the topic of interest for date producers and consumers. The quality of date palm fruit is much dependent on its postharvest handling and processing. For preventing the degradation and maintenance of the high quality of dates during the storage an appropriate harvest and post-harvest processes are required. The process should control the biotic and abiotic factors like insects, fungus, temperature, as well as handling and processing of dates. Therefore, in this work, we reviewed the literature related to the protection of date fruits during their post-harvest life. The commercially viable advance and updated techniques that can be used to avoid storage losses and problems while keeping fruit quality (nutritional, color, flavor, and texture) and microbial safety under optimal conditions are discussed.

The impact of seed micromorphology in the subgeneric classification of the genus Reseda L. (Resedaceae) in Turkey

Seed micromorphology of 18 taxa belonging to the genus Reseda (Resedaceae) in Turkey were investigated with scanning electron microscopy (SEM), in order to understand and check its diagnostic significance at subgeneric and sectional level. Seeds of Reseda species were photographed to evaluate different characteristics including appearance of the seed, testa ornamentation and the existence of carunculoid tissue at hilum regions. In addition, cluster analysis and principal component analysis (PCA) were performed to test whether the micromorphological data of the related taxa is compatible with the current classification of the genus. According to seed micromorphology, Reseda taxa in Turkey are divided into four main groups particularly by testa ornamentation as papillose, rugose, rugulose, and smooth. These results are also in agreement with the sectional classification of the genus in morphological and molecular perspective. The tree topology of Unweighted Pair Group Method with Arithmetic Average based on seed features supported the traditional classification. Principle component analysis revealed testa surface ornamentation as the most distinctive character for species identification. PCA also confirms our cluster grouping of the subgeneric and sectional classification of the taxa in Turkey. An identification key for the genus Reseda in Turkey is provided in the light of current data. The seed data is helpful for the identification of the genus Reseda in Turkey at sectional level. However, for an accurate identification at specific level, seed micromorphology is not sufficient alone and must be evaluated together with all diagnostic morphological features.

Comparative evaluation of the toxicological effect of silver salt (AgNO3 ) and silver nanoparticles on Cyprinus carpio synthesized by chemicals and marine algae using scanning electron microscopy

The widespread use of silver nanoparticles (AgNPs) results in the unintentional release into the water body. Therefore, understanding of the potentially harmful impacts of AgNPs and Ag-salt on aquatic animals is a need of time. This study was design to analyze the oxidative stress and histopathological damages in Cyprinus carpio. The synthesis of AgNPs from Halymenia porphyraeformis and by reduction of chemical was done. Nanoparticles were characterized with UV-Visible spectroscopy, SEM, XRD, and FTIR analysis. The comparative toxicological effect of chemically synthesized silver nanoparticles (Ch-AgNPs), green silver nanoparticles (Gr-AgNPs), and Ag-salt on C. carpio was analyzed. For oxidative stress analysis, different tests Lipid peroxidation (LPO), catalase, glutathione reduction (GST), and glutathione S-transferase (GST) were performed. The highest LPO 245.168 ± 0.034 was recorded in Ch-AgNPs-treated gills and the lowest 56.4532 ± 0.02 was found in Gr-AgNPs-treated liver. Maximum GSH 56.4065 ± 0.13 was observed in Gr-AgNPs liver and minimum 40.781 ± 0.54 was recorded in Ag-salt gills. The maximum quantity of catalase 68.0162 ± 0.09 was noted in the Ag-salt-treated liver and the minimum was calculated 17.3665 ± 0.01 in the liver of Ch-AgNPs and highest values of GST 765.829 ± 0.11 were recorded in gills of Gr-AgNPs and lowest 633.08 ± 0.26 in the liver of Ch-AgNPs-treated fish. In conclusion, maximum destruction was found in the gills and liver of the fish treated with chemical and green AgNPs followed by Ag-salt as compared to control. The adverse effects of AgNPs and Ag-salt were probably related to the oxidative stress in the fish that lead to histopathological damage of its vital organs.