Decolorization, biodegradation and detoxification of reactive red azo dye using non-adapted immobilized mixed cells

An overview of recent advances in treatment of complex dye-containing wastewater and its techno-economic assessment

Industries such as textiles, polymers, pharmaceuticals, papers, and tanneries are the key contributors to the global economy. These industries utilize various types of synthetic dyes in their processes, leading to discharge of dyes-contaminated wastewater. The wastewater generally contains various types of dyes (such as methyl orange, congo red, malachite green, etc.), which have a detrimental impact on the ecosystem and human health due to their toxic, carcinogenic, and mutagenic nature. As the result, it is crucial to treat the dyes-contaminated wastewater to protect the environment and render it suitable for reuse, mitigating the escalating global demand for clean water. This review provides a comprehensive overview of dyes and their treatment technologies (i.e., physical, chemical, and biological treatment). Among various treatment methods, the biological treatment is widely employed due to its energy efficiency and eco-friendliness. However, biological treatment faces challenges such as slow processing rates and limited effectiveness in handling low-biodegradability pollutants (BOD5/COD <0.2). This review also highlighted recent advancements in treatment technologies and explored the emerging integrated treatment method that aims to achieve higher removal efficiency for a low biodegradability index dye-contaminated wastewater. Additionally, a techno-economic assessment is presented, analyzing the cost-effectiveness of the emerging technologies in real-world applications. Further, the critical research gaps and future outlooks are also discussed. Overall, the review aims to contribute to the ongoing efforts to improve wastewater treatment processes and promote sustainable water management practices.

Adsorption and biodegradation of the azo dye methyl orange using Ralstonia pickettii immobilized in polyvinyl alcohol (PVA)-alginate-hectorite beads (BHec-RP)

Biological methods are widely used to treat dye waste, particularly methyl orange (MO) dye. The importance of MO degradation stems from its classification as a toxic dye. Within the scope of this research, successful bio-decolorization of MO was achieved through the use of Ralstonia pickettii bacteria immobilized in a PVA-alginate-hectorite matrix (BHec-RP). The optimum conditions for the degradation were observed at a composition of PVA (10%), hectorite (1%), static incubation, 40 °C, and pH 7. Subsequently, the adsorption kinetics of BHec-RP (dead cells) as well as the degradation kinetics of BHec-RP (live cells) and MO using free R. pickettii cells were evaluated. The decolorization of MO using BHec-RP (dead cells) is an adsorption process following pseudo-first-order kinetics (0.6918 mg g-1 beads) and occurs in a monolayer or physical process. Meanwhile, the adoption of BHec-RP (live cells) and free R. pickettii cells shows a degradation process under pseudo-first-order kinetics, with the highest rates at an initial MO concentration of 50 mg L-1 being 0.025 mg L-1 h-1 and 0.015 mg L-1 h-1, respectively. These results show that the immobilization system is superior compared to free R. pickettii cells. Furthermore, the degradation process shows the inclusion of several enzymes, such as azoreductase, NADH-DCIP reductase, and laccase, presumed to be included in the fragmentation of molecules. This results in five fragments based on LC-QTOF/MS analysis, with m/z values of 267.12; 189.09; 179.07; 169.09; and 165.05.

Microalgal and activated sludge processing for biodegradation of textile dyes

The textile industry contributes substantially to water pollution. To investigate bioremediation of dye-containing wastewater, the decolorization and biotransformation of three textile azo dyes, Red HE8B, Reactive Green 27, and Acid Blue 29, were considered using an integrated remediation approach involving the microalga Chlamydomonas mexicana and activated sludge (ACS). At a 5 mg L-1 dye concentration, using C. mexicana and ACS alone, decolorization percentages of 39%-64% and 52%-54%, respectively, were obtained. In comparison, decolorization percentages of 75%-79% were obtained using a consortium of C. mexicana and ACS. The same trend was observed for the decolorization of dyes at higher concentrations, but the potential for decolorization was low. The toxic azo dyes adversely affect the growth of microalgae and at high concentration 50 mg L-1 the growth rate inhibited to 50-60% as compared to the control. The natural textile wastewater was also treated with the same pattern and got promising results of decolorization (90%). Moreover, the removal of BOD (82%), COD (72%), TN (64%), and TP (63%) was observed with the consortium. The HPLC and GC-MS confirm dye biotransformation, revealing the emergence of new peaks and the generation of multiple metabolites with more superficial structures, such as N-hydroxy-aniline, naphthalene-1-ol, and sodium hydroxy naphthalene. This analysis demonstrates the potential of the C. mexicana and ACS consortium for efficient, eco-friendly bioremediation of textile azo dyes.

Biological activated carbon process for biotransformation of azo dye Carmoisine by Klebsiella spp

The feasibility of employing the biological activated carbon (BAC) process to debilitate azo dye Carmoisine by Klebsiella spp. was investigated. Plate assay revealed the capability of Klebsiella spp. for removal of Carmoisine via degradation. Kinetic parameters were measured for Carmoisine debilitation by Klebsiella spp. using the suspended anaerobic process. Two types of granular and rod-shaped activated carbon were used to form the biological beds in order to study the Carmoisine debilitation in batch processes. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to indicate the colonization and biofilm formation of bacteria grown on activated carbon particles (ACPs). Thin-layer chromatography (TLC), liquid chromatography-mass spectrometry (LC-MS), high-pressure liquid chromatography (HPLC) and biosorption studies demonstrated biotransformation of Carmoisine into its constituent aromatic amines during the Carmoisine debilitation in suspended anaerobic and BAC processes. The porosity of activated carbons, inoculation size and age of biological beds were the important factors affecting the viability of bacterial cells grown on ACPs and, consequently, the rate and efficiency of the Carmoisine debilitation process determined through spectrophotometry. The reusability of biological beds was demonstrated by conducting sequential batch experiments. In conclusion, the BAC process proved to be an efficient method for anaerobic dye degradation.

Optimization of reactive black 5 decolorization by the newly isolated Saccharomyces cerevisiae X19G2 using response-surface methodology

In the current investigation, the capacity of different yeast strains to decolorize reactive black 5 (RB-5) was assessed. A comparative study between the different strains demonstrated that Saccharomyces cerevisiae X19G2 exhibited the highest decolorization rate (69.20 ± 1.16%) after 48 h of incubation. This strain was selected to optimize the medium components' concentrations for maximum RB-5 decolorization. Response-surface methodology (RSM) was tested for the most significant parameters (glucose, yeast extract and RB-5 dye concentrations) that were previously determined by Plackett-Burman design. A dye decolorization rate of 99.59 ± 0.24% was achieved within 48 h using a maximum RB-5 concentration (0.15 g/L) with glucose and yeast extract concentrations equalling to 10.5 g/L and 1 g/L, respectively. Experimental data results proved to fit well with the pseudo-second order kinetics model. The phytotoxicity assessment was carried out using Raphanus sativus seeds to determine the toxicity of RB-5 before and after treatment by S. cerevisiae. Results suggested that germination rate and the length of seeds radical irrigated with 0.15 g/L of RB-5 decreased by 30 and 53%, compared to those irrigated with treated solution. Therefore, metabolites derived from decolorization of RB-5 by S. cerevisiae X19G2 were significantly less toxic than the original dye.

Bioremediation of soil contaminated with toxic mixed reactive azo dyes by co-cultured cells of Enterobacter cloacae and Bacillus subtilis

Azo dyes, known for its toxicity and mutagenicity, are used by textile industries. Bioremediation serves the best alternative treatment process due to its eco-friendly nature and cost-effectiveness. Degradation using individual bacteria promotes azo dye removal, while the degradation is enhanced using the immobilization method. Bio-carrier promotes the attachment of the bacterial strains and increases azo dye degradation. The present study focuses on the biodegradation of Reactive Red (RR), Reactive Brown (RB), Reactive Black dye (RBL), and mixed dyes in a soil slurry bioreactor containing free cells, co-culture, and immobilized cells. The physico-chemical analysis and soil characteristics were determined. The free cells of Bacillus cereus showed degradation of azo dyes - 79.42 ± 0.03% RR, 78.78 ± 0.02% RBL; 70.76 ± 0.03% RB, and 84.89 ± 0.05% of mixed dyes respectively. Enterobacter cloacae free cells resulted in degradation of 72.87 ± 0.01% RR, 75.21 ± 0.01% RBL, 74.50 ± 0.02% RB, and 73.39 ± 0.04% mixed dyes respectively. Co-cultured bacterial strains resulted in 77.18 ± 0.03% RR, 80.27 ± 0.02% RBL, 76.97 ± 0.02% RB and 86.29 ± 0.05% mixed dyes respectively. The immobilization of Bacillus cereus and Enterobacter cloacae on 2% corn starch resulted in 98.4 ± 0.01% degradation of RR, 89.8 ± 0.09% degradation of RB, 99.4 ± 0.05% of RBL, and 98.1 ± 0.08% of mixed reactive dyes respectively.

Spectral and structure characterization of Ferula assafoetida fabricated silver nanoparticles and evaluation of its cytotoxic, and photocatalytic competence

This study aims to develop an eco-friendly method for rapidly synthesizing silver nanoparticles (AgNPs) using Asafoetida ethanol extracts and to validate AgNPs synthesis using UV-vis spectroscopy (absorption spectrum), FTIR (functional groups), XRD (crystallinity), FE-SEM (size of the particles) and SEM-EDAX (Purity). Furthermore, to evaluate the anti-proliferative effect of Ag NPs against grown cultured L6 cell lines, studies have shown that AgNPs biosynthesis inhibits cancer cell growth compared to control cell lines. UV-vis absorption verified the existence of Ag NPs, and the spectrum was observed at 480 nm. Functional groups are present in the synthesized Ag NPs were shifted on 528.48 cm^-1 confirmed using an FT-IR spectrum. Consequently, anti-cancer efficacy observed the IC₅₀ value of As Ag NPs against L6 cells was 1.0 μg/mL for 48 h. Finally, using a halogen lamp, studies explored the photocatalytic degradation of AgNPs against the methylene blue radioactive dye and achieved a 96 percent degradation rate in 90 min. Asafoetida mediated silver nanoparticles show grater photodegradation for methylene blue dye, which is present in textile industries, when exposed to solar light, and it has a wide range of potential applications in wastewater treatment. As a whole, biosynthesized silver nanoparticles showed excellent cytotoxic, antioxidant, and photocatalytic dye degradation effects.

Methyl Orange Biodegradation by Immobilized Consortium Microspheres: Experimental Design Approach, Toxicity Study and Bioaugmentation Potential

Methyl orange (MO) is categorized among the recalcitrant and refractory xenobiotics, representing a significant burden in the ecosystem. To clean-up the surrounding environment, advances in microbial degradation have been made. The main objective of this study was to investigate the extent to which an autochthonous consortium immobilized in alginate beads can promote an efficient biodegradation of MO. By employing response surface methodology (RSM), a parametric model explained the interaction of immobilized consortium (Raoultella planticola, Ochrobactrum thiophenivorans, Bacillus flexus and Staphylococcus xylosus) to assimilate 200 mg/L of MO in the presence of 40 g/L of NaCl within 120 h. Physicochemical analysis, including UV-Vis spectroscopy and FTIR, and monitoring of the degrading enzymes (azoreductase, DCIP reductase, NADH reductase, laccase, LiP, MnP, nitrate reductase and tyrosinase) were used to evaluate MO degradation. In addition, the toxicity of MO-degradation products was investigated by means of phytotoxicity and cytotoxicity. Chlorella vulgaris retained its photosynthetic performance (>78%), as shown by the contents of chlorophyll-a, chlorophyll-b and carotenoids. The viability of normal lung and kidney cell lines was recorded to be 90.63% and 99.23%, respectively, upon exposure to MO-metabolic outcomes. These results reflect the non-toxicity of treated samples, implying their utilization in ferti-irrigation applications and industrial cooling systems. Moreover, the immobilized consortium was employed in the bioremediation of MO from artificially contaminated agricultural and industrial effluents, in augmented and non-augmented systems. Bacterial consortium remediated MO by 155 and 128.5 mg/L in augmented systems of agricultural and industrial effluents, respectively, within 144 h, revealing its mutual synergistic interaction with both indigenous microbiotas despite differences in their chemical, physical and microbial contents. These promising results encourage the application of immobilized consortium in bioaugmentation studies using different resources.

Statistical modeling of methylene blue degradation by yeast-bacteria consortium; optimization via agro-industrial waste, immobilization and application in real effluents

The progress in industrialization everyday life has led to the continuous entry of several anthropogenic compounds, including dyes, into surrounding ecosystem causing arduous concerns for human health and biosphere. Therefore, microbial degradation of dyes is considered an eco-efficient and cost-competitive alternative to physicochemical approaches. These degradative biosystems mainly depend on the utilization of nutritive co-substrates such as yeast extract peptone in conjunction with glucose. Herein, a synergestic interaction between strains of mixed-culture consortium consisting of Rhodotorula sp., Raoultella planticola; and Staphylococcus xylosus was recruited in methylene blue (MB) degradation using agro-industrial waste as an economic and nutritive co-substrate. Via statistical means such as Plackett-Burman design and central composite design, the impact of significant nutritional parameters on MB degradation was screened and optimized. Predictive modeling denoted that complete degradation of MB was achieved within 72 h at MB (200 mg/L), NaNO3 (0.525 gm/L), molasses (385 μL/L), pH (7.5) and inoculum size (18%). Assessment of degradative enzymes revealed that intracellular NADH-reductase and DCIP-reductase were key enzymes controlling degradation process by 104.52 ± 1.75 and 274.04 ± 3.37 IU/min/mg protein after 72 h of incubation. In addition, azoreductase, tyrosinase, laccase, nitrate reductase, MnP and LiP also contributed significantly to MB degradation process. Physicochemical monitoring analysis, namely UV-Visible spectrophotometry and FTIR of MB before treatment and degradation byproducts indicated deterioration of azo bond and demethylation. Moreover, the non-toxic nature of degradation byproducts was confirmed by phytotoxicity and cytotoxicity assays. Chlorella vulgaris retained its photosynthetic capability (˃ 85%) as estimated from Chlorophyll-a/b contents compared to ˃ 30% of MB-solution. However, the viability of Wi-38 and Vero cells was estimated to be 90.67% and 99.67%, respectively, upon exposure to MB-metabolites. Furthermore, an eminent employment of consortium either freely-suspended or immobilized in plain distilled water and optimized slurry in a bioaugmentation process was implemented to treat MB in artificially-contaminated municipal wastewater and industrial effluent. The results showed a corporative interaction between the consortium examined and co-existing microbiota; reflecting its compatibility and adaptability with different microbial niches in different effluents with various physicochemical contents.

Construction of integrated system for the treatment of Acid orange 7 dye from wastewater: Optimization and growth kinetic study

In this work, an effort has been made to develop an integrated system (ozonation followed by biodegradation) for the treatment of Acid orange 7 (AO 7) dye. The process parameters such as pH (3.0-11) and ozone dosage (5-25 mg/L) were optimized and obtained as 3.0 and 25 mg/L, respectively to treat the AO 7 by ozonation. Similarly, the process parameters, namely pH (5.0-9.0) and temperature (25-45 °C) were optimized and found to be 7.0 and 35 °C, respectively by biological treatment. Bacillus sp. was found to be the most effective bacteria to remove the AO 7. An integrated system obtained an overall 98.7% removal of AO 7 under optimum conditions. Andrews-Haldane model was best to predict the experimental data and the bio-kinetic constants; µ_max: 0.1875 day^-1; K_s: 49.53 mg/L; K_i: 133.32 mg/L were obtained. The developed integrated system can be a promising option for the treatment of azo dye containing-wastewaters.

New application of gelatin and starch as biocarriers for the biodegradation of reactive blue azo dye using immobilized mixed cells

Reactive azo dyes, if discharged in unmonitored manner to natural water bodies, can cause remarkable irreversible damage. The current study is centered on the decolorization and biodegradation of reactive blue (RB4) azo dye in an integrated sequential anaerobic-aerobic batch mode process. The biodegradation of reactive blue (RB4) was accomplished using alternatively both starch and gelatin-immobilized mixed cells. Activated sludge freshly collected from a sewage treatment plant was used as the biocatalyst. Complete decolorization of 10 mg/L RB4 under anaerobic conditions observed within 30 h by using individually mixed bacterial cells immobilized with; (1) starch cross-linked with polyvinyl alcohol (PVA-St beads), and (2) gelatin cross-linked with polyvinyl alcohol (PVA-Ge beads). The results revealed that maximum removal efficiencies of chemical oxygen demand (COD) under aerobic conditions were 89, 88, and 86%, using PVA-St beads, whereby they were 90, 85, 84% using PVA-Ge beads occurred within 70, 90 and 100 h at detected concentrations of 10, 20, and 40 mg/L, respectively. The effect of biocarrier has been proven to be negligible as the results were comparable using both bio-carriers.

Effects of green synthesized and commercial nZVI on crystal violet degradation by Burkholderia vietnamiensis C09V: Dose-dependent toxicity and biocompatibility

The increasingly common remedial application of nanoscale zero-valent iron (nZVI) to alleviate specific contaminant issues may inadvertently lead to nZVI accumulation in wastewater. This is a potential concern, because the effect of nZVI on the common microbes essential for wastewater biotreatment is not known. This is further complicated when there are many ways available to synthesize nZVI, which may interreact with bacteria differently. Thus, in this study, the different effects of nZVI synthesized by Eucalyptus leaves (EL-nZVI) and a commercially synthesized nZVI on the biodegradation of crystal violet by Burkholderia vietnamiensis C09V (B.V. C09V) was studied. At high dose (1000 mg/L), EL-nZVI and commercial nZVI both significantly inhibited the removal of crystal violet by B.V. C09V, decreasing removal rates by 10.5 and 13.1% respectively. Optical density (OD₆₀₀) and soluble protein assays indicated that the growth of B.V. C09V improved under low doses (100 mg/L), but remained inhibited under high doses (500 and 1000 mg/L) of both commercial and EL-nZVI. Enzymes were also sensitive to nZVI, where the commercial variant exerted a greater effect on both the activity of lactate dehydrogenase (LDH) and superoxide dismutase (SOD) than EL-nZVI, indicating that EL-nZVI was less toxic than commercial nZVI. LIVE/DEAD staining also showed that the number of apoptotic cells was significantly higher when exposed to commercial nZVI rather than EL-nZVI. Furthermore, scanning electron microscopy (SEM) confirmed that direct contact between nZVI and cells at 1000 mg/L nZVI caused cell membrane disruption. Whereas, at 100 mg/L EL-nZVI, B.V. C09V grew better due to the formation of dense biofilms around the suspended EL-nZVI at a. Fourier transform infrared spectra (FTIR), confirmed an abundance of oxygen-containing functional groups on the surface of EL-nZVI which provided better biocompatibility than commercial nZVI. Overall, while dose was the most significant factor influencing nZVI toxicity, surface composition and morphology was also important. These new findings suggest chemical synthesis of metal nanoparticles should be replaced by biosynthetic routes to maintain viable microbial pollution during wastewater treatment.

Mesoporous Carbons of Well-Organized Structure in the Removal of Dyes from Aqueous Solutions

Mesoporous carbons with differentiated properties were synthesized by using the method of impregnation of mesoporous well-organized silicas. The obtained carbonaceous materials and microporous activated carbon were investigated by applying different methods in order to determine their structural, surface and adsorption properties towards selected dyes from aqueous solutions. In order to verify applicability of adsorbents for removing dyes the equilibrium and kinetic experimental data were measured and analyzed by applying various equations and models. The structural and acid-base properties of the investigated carbons were evaluated by Small-Angle X-ray Scattering (SAXS) technique, adsorption/desorption of nitrogen, potentiometric titration, and Transmission Electron Microscopy (TEM). The results of these techniques are complementary, indicating the type of porosity and structural ordering, e.g., the pore sizes determined from the SAXS data are in good agreement with those obtained from nitrogen sorption data. The SAXS and TEM data confirm the regularity of mesoporous carbon structure. The adsorption experiment, especially kinetic measurements, reveals the utility of mesoporous carbons in dye removing, taking into account not only the adsorption uptake but also the adsorption rate.

Bioremediation of various aromatic and emerging pollutants by Bacillus cereus sp. isolated from petroleum sludge

The accumulation of toxic chemical constituents in sludge and wastewater has fuelled an interest in investigating efficient and eco-friendly wastewater remediation approaches. In this study, a set of bacterial samples were isolated from petroleum sludge and tested for their ability to degrade different aromatic pollutants, including azo dyes and emerging pollutants. Although exhibiting differential specificity, all bacterial isolates were able to degrade different classes of aromatic dyes efficiently. Ribosomal 16S rRNA sequencing of the 12 bacterial isolates showed that they belonged to two different bacterial genera: Bacillus cereus and Pseudomonas guariconensis. Of these 12 strains, MA1 (B. cereus) was the most promising and was chosen for further optimization and biochemical studies. The optimum culture and remediation conditions for MA1 was found to be at pH 7, with 100 ppm dye concentration, and under aerobic condition. In addition to efficiently degrading various aromatic dyes (e.g. Congo Red, Reactive Black 5, PBS, and Toluidine Blue), MA1 was also found to be capable of degrading various emerging pollutants (e.g. prometryn, fluometuron and sulfamethoxazole). Preliminary transcriptome analysis shows that MA1 grown on media containing a mixture of aromatic dyes appears to differentially express a number of genes. Data shown here strongly suggests that petroleum sludge is a rich reservoir of bacteria with powerful remediation abilities.

The Cyclic AMP Receptor Protein, Crp, Is Required for the Decolorization of Acid Yellow 36 in Shewanella putrefaciens CN32

Shewanella shows good application potentials in the decolorization and detoxification of azo dye wastewater. However, the molecular mechanism of decolorization is still lacking. In this study, it was found that Shewanella putrefaciens CN32 exhibited good decolorization ability to various azo dyes, and a global regulatory protein cAMP receptor protein (Crp) was identified to be required for the decolorization of acid yellow 36 (AY) by constructing a transposon mutant library. Then, the molecular mechanism of AY decolorization regulated by Crp was further investigated. RT-qPCR and electrophoretic mobility shift assay (EMSA) results showed that Crp was able to directly bind to the promoter region of the cymA gene and promote its expression. Riboflavin acting as an electron shuttle could accelerate the AY decolorization efficiency of S. putrefaciens CN32 wild-type (WT) but did not show a promoting effect to Δcrp mutant and ΔcymA mutant, further confirming that Crp promotes the decolorization through regulating electron transport chains. Moreover, the mutant with cymA overexpression could slightly enhance the AY decolorization efficiency compared with the WT strain. In addition, it was found that MtrA, MtrB, and MtrC partially contribute to the electron transfer from CymA to dye molecules, and other main electron transport chains need to be identified in future experiments. This study revealed the molecular mechanism of a global regulator Crp regulating the decolorization of azo dye, which is helpful in understanding the relationship between the decolorization and other metabolic processes in S. putrefaciens CN32.

New application of Orchis mascula as a biocarrier for immobilization of mixed cells for biodegradation and detoxification of reactive azo dyes

In this study, the application of novel biocarrier Orchis mascula plant for immobilization of non-adapted mixed cells biodegrade reactive azo dyes in aqueous solution was investigated via a sequential anaerobic-aerobic process. Three reactive azo dyes including red (RR2), blue (RB4), and yellow (RY15) were individually used as the target pollutants. Results revealed that the immobilized biocatalysts had a potential degrading efficiency, targeting the initial structure and the formed aromatic/aliphatic compounds, respectively. Complete decolorization (100%) of RR2, RB4, and RY15 was observed in the anaerobic phase with significant COD removal which has been enhanced during the subsequent aerobic phase. Results demonstrated that COD removals at 10, 20, and 40 mg/L were 100 ± 0.13%, 95 ± 0.05%, and 90 ± 0.03% for RR2; 90 ± 0.11%, 85 ± 0.9%, and 81 ± 0.18% for RB4; and 100 ± 0.08%, 92 ± 0.16%, and 86 ± 0.06% for RY15, respectively. Immobilized cells exhibited better performance compared with free cells, particularly for high dye concentration up to 100 mg/L.

Synthesis of cost-effective magnetic nano-biocomposites mimicking peroxidase activity for remediation of dyes

The present study describes preparation of cellulose incorporated magnetic nano-biocomposites (CNPs) by using cellulose as base material. The prepared CNPs were characterised by SEM, EDAX, TEM, XRD, and FT-IR and found to exhibit an intrinsic peroxidase-like activity with a K_m and V_max of 550 μM and 3.8 μM/ml/min, respectively. The CNPs exhibited higher pH and thermal stability compared to commercial peroxidase. These nanocomposites were able to completely remove (i) a persistent azo dye, methyl orange at a concentration of 50 ppm, within 60 min under acidic conditions (pH 3.0) and also (ii) decolourize commercial textile dye mixture under acidic conditions within 30 min. CNP-mediated degradation of dyes into simple products was further confirmed by UV-Vis and AT-IR spectroscopy The added advantage of CNPs separation after decolourization by simple magnet due to their magnetic properties and consequent reusability makes them fairy attractive system for dye remediation from environmental samples or textile industries effluents.

The Application of Modified Natural Polymers in Toxicant Dye Compounds Wastewater: A Review

The utilization of various types of natural and modified polymers for removing toxicant dyes in wastewater generated by the dye industry is reviewed in this article. Dye wastewater contains large amounts of metals, surfactants, and organic matter, which have adverse effects on human health, potentially causing skin diseases and respiratory problems. The removal of dyes from wastewaters through chemical and physical processes has been addressed by many researchers. Currently, the use of natural and modified polymers for the removal of dyes from wastewater is becoming more common. Although modified polymers are preferred for the removal of dyes, due to their biodegradability and non-toxic nature, large amounts of polymers are required, resulting in higher costs. Surface-modified polymers are more effective for the removal of dyes from the wastewater. A survey of 80 recently published papers demonstrates that modified polymers have outstanding dye removal capabilities, and thus have a high applicability in industrial wastewater treatment.

Green synthesis of cobalt oxide nanoparticles using Citrus medica leaves extract: characterization and photo-catalytic activity

The study deals with the green and eco-friendly synthesis and characterization of cobalt oxide nanoparticles using leaf extract of Citrus medica plant. The crystalline nature and functional groups analysis of cobalt oxide Nps was confirmed by X-ray diffraction and diffused reflectance infra-red spectroscopy respectively. The band gap of the Nps was calculated using Tauc plot. Scanning microscope analysis was carried out to get an insight to the structural morphology of the catalyst. The catalyst was found to be very active for the degradation of methyl orange dye using a very small amount of catalyst (0.006 g) using ultra violet radiation source. Approximately, 90% of the dye (Initial Conc. 10 mg L−1) was degraded in 60 min at natural pH (6.5). The dye degradation increased with increase in pH of the solution, due to the enhanced production of OH radicals, at higher pH values. Different experimental parameters like catalyst amount, agitation speed, initial pH of the solution, initial concentration of dye and recycling of the catalyst were varied to test the performance of the catalyst.

Decolorization of Palm Oil Mill Effluent by Klebsiella Pneumonia ABZ11: Remediation Efficacy and Statistical Optimization of Treatment Conditions

Colorants contained in palm oil mill effluent (POME) are recalcitrant and carcinogenic in nature. The commonly applied ponding treatment methods have been reported inefficient for remediating the concentration of the colorants before discharge. The need for sustainable and efficient treatment technique is crucial in order to preserve the environment. In this view, this study reported the first attempt to decolorize POME using a proliferate Klebsiella Pneumonia ABZ11 at varied inoculum sizes of 5–25% (v/v), initial color concentration (650–2,600 ADMI) and treatment time of 5-40 h. The treatment conditions were optimized using Response Surface Methodology. At optimal conditions of 20% (v/v) inoculum size, initial-color concentration of 2,600 ADMI, initial pH of 7 and 35 h treatment retention time, over 80.40% color removal was achieved with insignificant disparity compared with the model predicted value of 81.538%. Also, the Monod model excellently described the decolorization kinetic process with 0.9214 coefficient of correlation (R²), and the calculated maximum growth μ_max) and half-saturation constant (K_s) were 7.023 d^–1 and 340.569 ADMI d^–1, respectively. This study revealed that the Klebsiella Pneumonia ABZ11 was highly prolific and such feature may favor a synergistic biodegradation process.

Biodegradation of Congo red dye in a moving bed biofilm reactor: Performance evaluation and kinetic modeling

The biodegradation of Congo red dye was performed using polyurethane foam-polypropylene immobilized Bacillus sp. MH587030.1 in a moving bed biofilm reactor (MBBR). The central composite design (CCD) based response surface methodology (RSM) was used to optimize the process parameters; pH, Congo red concentration, and media filling ratio, and optimum conditions were observed to be 7.0, 50 mg/L, and 45%, respectively in batch MBBR. At optimum condition, MBBR was operated in continuous mode at different flow rates (25-100 mL/h) over a period of 564 h. The maximum removal efficiency (RE) and elimination capacity (EC) were obtained as 95.7% and 57.6 mg/L·day, respectively under steady-state. The kinetics of Congo red biodegradation at various flow rates were evaluated by a modified Stover-Kincannon model, and kinetic constants; K_B and U_max were found to be 0.253 g/L·day and 0.263 g/L·day, respectively.

Effective decolorization of anthraquinone dye reactive blue 19 using immobilized Bacillus sp. JF4 isolated by resuscitation-promoting factor strategy

Given the highly complex recalcitrant nature of synthetic dyes, biological treatment of textile wastewater using efficient bacterial species is still considered as an environmentally friendly manner. In this study, a reactive blue 19 (RB19)-degrading strain, Bacillus sp. JF4, which was isolated by resuscitation-promoting factor (Rpf) strategy, was immobilized into polyvinyl alcohol-calcium alginate-activated carbon beads (JF4-immobilized beads) for RB19 decolorization. Results suggest that the JF4-immobilized beads, which were capable of simultaneous adsorption and biodegradation, showed a high decolorization activity, while they exhibited better tolerability towards high RB19 concentrations. The JF4-immobilized beads could almost completely decolorize 100 mg/L RB19 within 10 d, while only 92.1% was decolorized by free bacteria within 12 d. Further investigation on the equilibrium and kinetics of the adsorption process suggests that the pseudo-second-order model best fit the adsorption kinetics data, and the Freundlich isotherm was the most suitable for the description of the equilibrium data. Notably, the repeated batch cycles indicated that complete decolorization of 100 mg/L RB19 by JF4-immobilized beads can be maintained for at least three cycles without much reduction in efficiency. These findings suggest that immobilizing Rpf-resuscitated strain into beads was an effective strategy for textile wastewater treatment.

Bioremediation of tetracycline antibiotics-contaminated soil by bioaugmentation

Bioaugmentation using specific microbial strains or consortia was deemed to be a useful bioremediation technology for increasing bioremediation efficiency. The present study confirmed the effectiveness and feasibility of bioaugmentation capability of the bacterium BC immobilized on sugarcane bagasse (SCB) for degradation of tetracycline antibiotics (TCAs) in soil. It was found that an inoculation dose of 15% (v/w), 28–43 °C, slightly acidic pH (4.5–6.5), and the addition of oxytetracycline (OTC, from 80 mg kg⁻¹ to 160 mg kg⁻¹) favored the bioaugmentation capability of the bacterium BC, indicating its strong tolerance to high temperature, pH, and high substrate concentrations. Moreover, SCB-immobilized bacterium BC system exhibited strong tolerance to heavy metal ions, such as Pb²⁺ and Cd²⁺, and could fit into the simulated soil environment very well. In addition, the bioaugmentation and metabolism of the co-culture with various microbes was a complicated process, and was closely related to various species of bacteria. Finally, in the dual-substrate co-biodegradation system, the presence of TC at low concentrations contributed to substantial biomass growth but simultaneously led to a decline in OTC biodegradation efficiency by the SCB-immobilized bacterium BC. As the total antibiotic concentration was increased, the OTC degradation efficiency decreased gradually, while the TC degradation efficiency still exhibited a slow rise tendency. Moreover, the TC was preferentially consumed and degraded by continuous introduction of OTC into the system during the bioremediation treatment. Therefore, we propose that the SCB-immobilized bacterium BC exhibits great potential in the bioremediation of TCAs-contaminated environments.

Bioaugmentation using specific microbial strains or consortia was deemed to be a useful bioremediation technology for increasing bioremediation efficiency.

A Novel Au@Cu2O-Ag Ternary Nanocomposite with Highly Efficient Catalytic Performance: Towards Rapid Reduction of Methyl Orange Under Dark Condition

Au@Cu2O core-shell nanocomposites (NCs) were synthesized by reducing copper nitrate on Au colloids with hydrazine. The thickness of the Cu2O shells could be varied by adjusting the molar ratios of Au: Cu. The results showed that the thickness of Cu2O shells played a crucial role in the catalytic activity of Au@Cu2O NCs under dark condition. The Au@Cu2O-Ag ternary NCs were further prepared by a simple galvanic replacement reaction method. Moreover, the surface features were revealed by TEM, XRD, XPS, and UV-Vis techniques. Compared with Au@Cu2O NCs, the ternary Au@Cu2O-Ag NCs had an excellent catalytic performance. The degradation of methyl orange (MO) catalyzed by Au@Cu2O-Ag NCs was achieved within 4 min. The mechanism study proved that the synergistic effects of Au@Cu2O-Ag NCs and sodium borohydride facilitated the degradation of MO. Hence, the designed Au@Cu2O-Ag NCs with high catalytic efficiency and good stability are expected to be the ideal environmental nanocatalysts for the degradation of dye pollutants in wastewater.

Azo dyes degradation and mutagenicity evaluation with a combination of microbiological and oxidative discoloration treatments

This work evaluated the degradation of the Acid Blue 161 and Procion Red MX-5B dyes in a binary solution by the filamentous fungus Aspergillus terreus and the yeast Saccharomyces cerevisiae in systems with and without electrochemical oxidation as the pretreatment process. UV-Vis spectrophotometry, high-performance liquid chromatography with (HPLC), Fourier transform infrared (FT-IR) spectroscopy and Salmonella/microsome assay (Ames test) were applied towards the degradation analysis of the dyes. Adsorption tests with white clay immobilized on alginate were also conducted after the discoloration treatments to remove intermediate metabolites formed during the degradation of the dye molecules. The discoloration treatments led to the complete color removal of the solutions in all the systems tested. The clay demonstrated affinity for the metabolites formed after discoloration treatments, the removal rates were variable, but the all systems has proved efficient. The Salmonella/microsome assay (Ames test) with strains TA98 and TA100 in the absence and presence of exogenous metabolism (S9 microsomal system, Moltox) revealed that the initial molecules and by-products of the metabolism of the dyes were direct mutagens. The electrochemical/A. terreus/clay system was able to discolor the solutions and transform the direct mutagens into non-mutagenic compounds in addition to reducing the mutagenic potency of the pro-mutagens to the Salmonella strain TA100/S9, which demonstrates the high efficiency of this system with regard to discoloring and degrading azo dye molecules and their by-products. Therefore, this study showed that although not having standard treatment system for this type of pollutant, the combination of treatments can be considered promising. The use of electrochemical oxidation along with microbiological treatment may lead to the degradation and mineralization of these compounds, reducing or eliminating the environmental impact caused by the improper disposal of these dyes in aquatic environments.

Treatments for color removal from wastewater: State of the art

It is evident from many recent papers that release of colored wastewater into the environment is source of pollution and this is a problem that particularly affect textile, dyeing and food industries. The review: (i) presents an analysis of various mechanisms involved in the different processes for color removal; (ii) describes conveniences and disadvantages that may exist in adopting one type of treatment in spite of another; (iii) reports the results of approximately 180 experimental tests. Both examples of treatments already widely applied to the real scale and still in the experimental phase are reported. This work focuses on different types of chemical/physical, chemical, electrochemical and biological processes applied in the field of color removal from industrial wastewater. Common chemical/physical treatments such as coagulation/flocculation, adsorption and membrane filtration as well as chemical-type processes are discussed, both those that exploit the traditional oxidizing chemical agents such as Ozone, H₂O₂ and reactive based on chlorine and those based on the principle of advanced chemical oxidation. In particular, both Hydroxyl radical based Advanced Oxidation Processes (AOPs) and Sulfate radical based AOPs are reported. The most commonly used Electrochemical processes for the removal of color are also presented as well as biological treatments. Based on more than 200 papers, this review provides important information on the use, effectiveness, advantages and downsides of the various treatments aimed at removing the color from the wastewater with a look at the technologies still under development.

Decolorization and detoxification of water-insoluble Sudan dye by Shewanella putrefaciens CN32 co-cultured with Bacillus circulans BWL1061

Effluents loaded with various synthetic dyes are considered as a huge burden to the surrounding ecosystems. Sudan dyes are relatively difficult to decolorize due to its water-insolubility. In the present study, the strain Shewanella putrefaciens CN32 was firstly applied to decolorize Sudan dyes under the anaerobic condition, and the physicochemical parameters on the decolorization were optimized. The results demonstrated that the suitable decolorization condition was temperature 26 °C, initial pH 7.0-8.0 and NaCl concentrations 0-20 g/L. Electron competitive acceptors including nitrite, nitrate, dimethyl sulphoxide and oxygen could cause the significant inhibition to the decolorization of Sudan dyes. Biosurfactant rhamnolipid played a positive role in enhancing the decolorization of Sudan I. The co-culture of S. putrefaciens CN32 and Bacillus circulans BWL1061 is reported for the first time to accelerate the decolorization through improving the synergistic effect of enzymatic degradation and biological reductive effect. The highest decolorization of 90.23% to Sudan I was achieved within 108 h, suggesting that co-culture technique has a good potential in the treatment of dyeing wastewater. Furthermore, the microbial toxicity tests indicated that the toxicity of Sudan I to Escherichia coli BL21 and Bacillus subtilis 168 was obviously decreased after the decolorization.