A “room-temperature” injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds

Wet 3D printing of biodegradable porous scaffolds to enable room-temperature deposition modeling of polymeric solutions for regeneration of articular cartilage

Tissue engineering has emerged as an advanced strategy to regenerate various tissues using different raw materials, and thus it is desired to develop more approaches to fabricate tissue engineering scaffolds to fit specific yet very useful raw materials such as biodegradable aliphatic polyester like poly (lactide-co-glycolide) (PLGA). Herein, a technique of 'wet 3D printing' was developed based on a pneumatic extrusion three-dimensional (3D) printer after we introduced a solidification bath into a 3D printing system to fabricate porous scaffolds. The room-temperature deposition modeling of polymeric solutions enabled by our wet 3D printing method is particularly meaningful for aliphatic polyester, which otherwise degrades at high temperature in classic fuse deposition modeling. As demonstration, we fabricated a bilayered porous scaffold consisted of PLGA and its mixture with hydroxyapatite for regeneration of articular cartilage and subchondral bone. Long-termin vitroandin vivodegradation tests of the scaffolds were carried out up to 36 weeks, which support the three-stage degradation process of the polyester porous scaffold and suggest faster degradationin vivothanin vitro. Animal experiments in a rabbit model of articular cartilage injury were conducted. The efficacy of the scaffolds in cartilage regeneration was verified through histological analysis, micro-computed tomography (CT) and biomechanical tests, and the influence of scaffold structures (bilayerversussingle layer) onin vivotissue regeneration was examined. This study has illustrated that the wet 3D printing is an alternative approach to biofabricate tissue engineering porous scaffolds based on biodegradable polymers.

Pioneering a paradigm shift in tissue engineering and regeneration with polysaccharides and proteins-based scaffolds: A comprehensive review

In the realm of modern medicine, tissue engineering and regeneration stands as a beacon of hope, offering the promise of restoring form and function to damaged or diseased organs and tissues. Central to this revolutionary field are biological macromolecules-nature's own blueprints for regeneration. The growing interest in bio-derived macromolecules and their composites is driven by their environmentally friendly qualities, renewable nature, minimal carbon footprint, and widespread availability in our ecosystem. Capitalizing on these unique attributes, specific composites can be tailored and enhanced for potential utilization in the realm of tissue engineering (TE). This review predominantly concentrates on the present research trends involving TE scaffolds constructed from polysaccharides, proteins and glycosaminoglycans. It provides an overview of the prerequisites, production methods, and TE applications associated with a range of biological macromolecules. Furthermore, it tackles the challenges and opportunities arising from the adoption of these biomaterials in the field of TE. This review also presents a novel perspective on the development of functional biomaterials with broad applicability across various biomedical applications.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

Fabrication of Porous Crystalline PLGA-PEG Induced by Swelling during the Recrystallization Annealing Process

Poly(lactide-co-glycolide) (PLGA) has been widely used as a scaffold material for tissue engineering owing to its biocompatibility, biodegradability, and biosafety. However, lactic acid (LA) produced during PLGA degradation is prone to inflammation, which is a shortcoming that must be avoided. To this end, crystalline PLGA-PEG was synthesized here for the first time. To make the crystalline PLGA-PEG more suitable for tissue engineering, porous crystalline PLGA-PEG was prepared via the swelling behavior during recrystallization annealing. The structure and properties of the porous crystalline PLGA-PEG were confirmed by SEM, POM, and XRD. Furthermore, the swelling behavior of different PEG molecular weights was studied, and the cell viability test and alkaline phosphatase activity test showed that PLGA-PEG has good biocompatibility. Such a porous crystalline PLGA-PEG will make PLGA have a broader application prospect in bone repair.

Anticoagulant Hydrogel Tubes with Poly(ɛ-Caprolactone) Sheaths for Small-Diameter Vascular Grafts

Small-diameter vascular grafts (inner diameter < 6 mm) are useful in treating cardiovascular diseases. The off-the-shelf small-diameter vascular grafts for clinical applications remain a great limitation owing to their thrombogenicity or intimal hyperplasia. Herein, bilayer anticoagulant hydrogel tubes with poly(ε-caprolactone) (PCL) sheaths are prepared by freeze-thawing and electrospinning, which contain nanofibrillated cellulose (NFC)/poly(vinyl alcohol) (PVA)-heparin/poly-L-lysine nanoparticles tube as an inner layer and PCL sheath as an outer layer. The structure, anticoagulant property, and biocompatibility of the inner layer are studied. The effects of thickness of the outer layer on perfusion performance and mechanical property of hydrogel tubes with PCL sheaths (PCL-NFC/PVA-NPs tubes) are investigated. The effect of compliance of PCL-NFC/PVA-NPs tubes on their blood flow is studied by numerical simulation. The tissue compatibility and the patency of PCL-NFC/PVA-NPs tubes are evaluated by implantation in subcutaneous tissue of rats and carotid artery of rabbits. PCL-NFC/PVA-NPs tubes have prominent anticoagulation, sufficient burst pressure and good compliance similar to native arteries. PCL-NFC/PVA-NPs tubes facilitate infiltration of host cells and achieve active proliferation of recruited cells, which will be a promising candidate for small-diameter vascular grafts.

Applications of Biomaterials in 3D Cell Culture and Contributions of 3D Cell Culture to Drug Development and Basic Biomedical Research

The process of evaluating the efficacy and toxicity of drugs is important in the production of new drugs to treat diseases. Testing in humans is the most accurate method, but there are technical and ethical limitations. To overcome these limitations, various models have been developed in which responses to various external stimuli can be observed to help guide future trials. In particular, three-dimensional (3D) cell culture has a great advantage in simulating the physical and biological functions of tissues in the human body. This article reviews the biomaterials currently used to improve cellular functions in 3D culture and the contributions of 3D culture to cancer research, stem cell culture and drug and toxicity screening.

Cell-Free Bilayered Porous Scaffolds for Osteochondral Regeneration Fabricated by Continuous 3D-Printing Using Nascent Physical Hydrogel as Ink

Cartilage is difficult to self-repair and it is more challenging to repair an osteochondral defects concerning both cartilage and subchondral bone. Herein, it is hypothesized that a bilayered porous scaffold composed of a biomimetic gelatin hydrogel may, despite no external seeding cells, induce osteochondral regeneration in vivo after being implanted into mammal joints. This idea is confirmed based on the successful continuous 3D-printing of the bilayered scaffolds combined with the sol-gel transition of the aqueous solution of a gelatin derivative (physical gelation) and photocrosslinking of the gelatin methacryloyl (gelMA) macromonomers (chemical gelation). At the direct printing step, a nascent physical hydrogel is extruded, taking advantage of non-Newtonian and thermoresponsive rheological properties of this 3D-printing ink. In particular, a series of crosslinked gelMA (GelMA) and GelMA-hydroxyapatite bilayered hydrogel scaffolds are fabricated to evaluate the influence of the spacing of 3D-printed filaments on osteochondral regeneration in a rabbit model. The moderately spaced scaffolds output excellent regeneration of cartilage with cartilaginous lacunae and formation of subchondral bone. Thus, tricky rheological behaviors of soft matter can be employed to improve 3D-printing, and the bilayered hybrid scaffold resulting from the continuous 3D-printing is promising as a biomaterial to regenerate articular cartilage.

Rapid development of dual porous poly(lactic acid) foam using fused deposition modeling (FDM) 3D printing for medical scaffold application

The poor melt property and brittleness of poly(lactic acid) (PLA) cause difficulties in extrusion foaming and decrease product performance in industrial and research fields. In this paper, the rheological properties of PLA resin were improved using an epoxy chain extension reaction, which led to the improvement of pore properties such as morphology and foamability. Reinforced PLA was extruded in a porous filament, and a scaffold was fabricated with design freedom, one-step processing, and dual porosity by extrusion foaming and 3D printing. In addition, in vitro cell culture tests were performed to verify the cell biology assessment and confirm the potential of the scaffold for application as medical scaffolds.

Fabrication of fibrillated and interconnected porous poly(ε-caprolactone) vascular tissue engineering scaffolds by microcellular foaming and polymer leaching

This paper provides a method combining eco-friendly supercritical CO₂ microcellular foaming and polymer leaching to fabricate small-diameter vascular tissue engineering scaffolds.

Scaffolds for epithelial tissue engineering customized in elastomeric molds

Restoration of soft tissue defects remains a challenge for surgical reconstruction. In this study, we introduce a new approach to fabricate poly(d,l-lactic acid) (PDLLA) scaffolds with anatomical shapes customized to regenerate three-dimensional soft tissue defects. Highly concentrated polymer/salt mixtures were molded in flexible polyether molds. Microcomputed tomography showed that with this approach it was possible to produce scaffolds with clinically acceptable volume ratio maintenance (>90%). Moreover, this technique allowed us to customize the average pore size and pore interconnectivity of the scaffolds by using variations of salt particle size. In addition, this study demonstrated that with the increasing porosity and/or the decreasing of the average pore size of the PDLLA scaffolds, their mechanical properties decrease and they degrade more slowly. Cell culture results showed that PDLLA scaffolds with an average pore size of 100 µm enhance the viability and proliferation rates of human gingival epithelial cells up to 21 days. The simple method proposed in this article can be extended to fabricate porous scaffolds with customizable anatomical shapes and optimal pore structure for epithelial tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 880-890, 2018.

Fabrication of poly(ε-caprolactone) tissue engineering scaffolds with fibrillated and interconnected pores utilizing microcellular injection molding and polymer leaching

Three-dimensional fibrillated interconnected porous poly(ε-caprolactone) scaffolds were prepared by microcellular injection molding and polymer leaching.

Injectable doxorubicin-loaded hydrogels based on dendron-like β-cyclodextrin–poly(ethylene glycol) conjugates

Dendron-like CD–PEG conjugates with multiple acrylates were synthesized facilely, which can incorporate adamantane-modified doxorubicin and further be crosslinked by POEGMS, to give injectable doxorubicin-loaded hydrogels.

Engineering Porous Poly(lactic acid) Scaffolds with High Mechanical Performance via a Solid State Extrusion/Porogen Leaching Approach

A knotty issue concerning the poor mechanical properties exists in the porogen leaching approach to porous scaffolds, despite its advantage in tuning pore structure. To address this hurdle, solid state extrusion (SSE) combined with porogen leaching was utilized to engineer porous scaffolds of poly(lactic acid) (PLA). Advances introduced by poly(ethylene glycol) (PEG) caused the PLA ductile to be processed and, on the other hand, enabled the formation of interconnected pores. Thus, a well-interconnected porous architecture with high connectivity exceeding 97% and elevated porosity over 60% was obtained in the as-prepared PLA scaffolds with the composition of NaCl higher than 75.00 wt % and PEG beyond 1.25 wt %. More strikingly, the pore walls of macropores encompassed countless micropores and rough surface topography, in favor of transporting nutrients and metabolites as well as cell attachment. The prominent compressive modulus of the PLA scaffolds was in the range of 85.7⁻207.4 MPa, matching the normal modulus of human trabecular bone (50⁻250 MPa). By means of alkaline modification to improve hydrophilicity, biocompatible porous PLA scaffolds exhibited good cell attachment. These results suggest that the SSE/porogen leaching approach provides an eligible clue for fabricating porous scaffolds with high mechanical performance for use as artificial extracellular matrices.

Effect of porosities of bilayered porous scaffolds on spontaneous osteochondral repair in cartilage tissue engineering

Poly(lactide-co-glycolide)-bilayered scaffolds with the same porosity or different ones on the two layers were fabricated, and the porosity effect on in vivo repairing of the osteochondral defect was examined in a comparative way for the first time. The constructs of scaffolds and bone marrow-derived mesenchymal stem cells were implanted into pre-created osteochondral defects in the femoral condyle of New Zealand white rabbits. After 12 weeks, all experimental groups exhibited good cartilage repairing according to macroscopic appearance, cross-section view, haematoxylin and eosin staining, toluidine blue staining, immunohistochemical staining and real-time polymerase chain reaction of characteristic genes. The group of 92% porosity in the cartilage layer and 77% porosity in the bone layer resulted in the best efficacy, which was understood by more biomechanical mimicking of the natural cartilage and subchondral bone. This study illustrates unambiguously that cartilage tissue engineering allows for a wide range of scaffold porosity, yet some porosity group is optimal. It is also revealed that the biomechanical matching with the natural composite tissue should be taken into consideration in the design of practical biomaterials, which is especially important for porosities of a multi-compartment scaffold concerning connected tissues.

The Porous Structure and Mechanical Properties of Injection Molded HA/PA66 Scaffolds

Hydroxyapatite/polyamide-66 (HA/PA66) composite scaffolds were prepared using injection-molding technique, and also analyzed by means of scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), Fourier transform infrared spectroscopy (FTIR) and mechanical testing. Compared with common methods including solvent casting/particulate leaching, phase separation and so forth to fabricate scaffolds, this process is of a rapid and convenient manner. The increase of HA content can increase the stiffness of composite scaffolds accompanied by the reduction of impact strength, pore size and porosity. The storage modulus of composite scaffolds increases with increasing HA content and with decreasing porosity. The damping (tan δ) of PA66 decreases with the increase of HA content, and the α and β relaxation peaks of PA66 for the foamed HA/PA66 composites slightly shift to lower value, indicating that both HA and gas in the foamed HA/PA66 composites have an effect on the chain mobility of the polymer and the interaction between the polymer chains. The microstructure of the 30 wt% and 40 wt% HA/PA66 composite scaffolds with porosity more than 59 % and pore size ranging from 100 to 500 μm is similar to that of dry human trabecular bone. The obtained composite scaffolds with 30 wt% and 40 wt% HA have a compressive modulus of 232 to 443 MPa, and a compressive strength of 9.3 to 9.8 MPa, similar to or a little higher than those of trabecular bone, and close to those of the cancellous bone.

Recent advances in bioprinting and applications for biosensing

Future biosensing applications will require high performance, including real-time monitoring of physiological events, incorporation of biosensors into feedback-based devices, detection of toxins, and advanced diagnostics. Such functionality will necessitate biosensors with increased sensitivity, specificity, and throughput, as well as the ability to simultaneously detect multiple analytes. While these demands have yet to be fully realized, recent advances in biofabrication may allow sensors to achieve the high spatial sensitivity required, and bring us closer to achieving devices with these capabilities. To this end, we review recent advances in biofabrication techniques that may enable cutting-edge biosensors. In particular, we focus on bioprinting techniques (e.g., microcontact printing, inkjet printing, and laser direct-write) that may prove pivotal to biosensor fabrication and scaling. Recent biosensors have employed these fabrication techniques with success, and further development may enable higher performance, including multiplexing multiple analytes or cell types within a single biosensor. We also review recent advances in 3D bioprinting, and explore their potential to create biosensors with live cells encapsulated in 3D microenvironments. Such advances in biofabrication will expand biosensor utility and availability, with impact realized in many interdisciplinary fields, as well as in the clinic.

Fabrication of porous synthetic polymer scaffolds for tissue engineering

Tissue engineering provides a novel and promising approach to replace damaged tissue with an artificial substitute. Porous synthetic biodegradable polymers are the preferred materials for this substitution due to their microstructure, biocompatibility, biodegradability, and low cost. As a crucial element in tissue engineering, a scaffold acts as an artificial extracellular matrix (ECM) and provides support for cell migration, differentiation, and reproduction. The fabrication of viable scaffolds, however, has been a challenge in both clinical and academic settings. Methods such as solvent casting/particle leaching, thermally induced phase separation (TIPS), electrospinning, gas foaming, and rapid prototyping (additive manufacturing) have been developed or introduced for scaffold fabrication. Each method has its own advantages and disadvantages. In this review, the commonly used synthetic polymer scaffold fabrication methods will be introduced and discussed in detail, and recent progress regarding scaffold fabrication—such as combining different scaffold fabrication methods, combining various materials, and improving current scaffold fabrication methods—will be reviewed as well.

Morphology, mechanical properties, and shape memory effects of poly(lactic acid)/ thermoplastic polyurethane blend scaffolds prepared by thermally induced phase separation

Novel blended scaffolds combining biobased polylactic acid (PLA) and thermoplastic polyurethane (TPU) were fabricated by thermally induced phase separation (TIPS) using two different solvents. Pure PLA and TPU polymer scaffolds using 1,4-dioxane as the sole solvent exhibited typical ladder-like structures, while blended PLA/TPU scaffolds using the same solvent showed a more uniform microstructure. When de-ionized water was added to the solution as a non-solvent, scaffolds with the mixed solvent showed more open cells and greater interconnectivity. In compression tests, it was found that specimens, including pure PLA, TPU, and blended scaffolds with the mixed solvent, showed a higher compressive modulus than their counterparts that used dioxane as the single solvent. Dynamic mechanical analysis (DMA) was employed to characterize the shape memory properties of the scaffolds. DMA indicated that the shape fixing ratio was highest in the PLA scaffolds, while the shape recovery ratio of the TPU scaffolds was the greatest among the specimens. More interestingly, when the mixed solvent was used, the shape memory property of the blended scaffolds displayed a similar deformation curve to the TPU scaffold. This was due to the presence of the TPU phase and similarity in structure between PLA/TPU and TPU scaffolds when mixed solvent was used. In the degradation test, the blended scaffolds showed a balanced degradation behavior in-between the more easily degraded PLA and the more stable TPU in the phosphate-buffered saline (PBS), and the addition of water to the systems accelerated the degradation process of the specimens. Cell culture results showed that all of the scaffolds had good biocompatibility.

Design and preparation of polymeric scaffolds for tissue engineering

Polymeric scaffolds for tissue engineering can be prepared with a multitude of different techniques. Many diverse approaches have recently been under development. The adaptation of conventional preparation methods, such as electrospinning, induced phase separation of polymer solutions or porogen leaching, which were developed originally for other research areas, are described. In addition, the utilization of novel fabrication techniques, such as rapid prototyping or solid free-form procedures, with their many different methods to generate or to embody scaffold structures or the usage of self-assembly systems that mimic the properties of the extracellular matrix are also described. These methods are reviewed and evaluated with specific regard to their utility in the area of tissue engineering.

Cell-material interactions revealed via material techniques of surface patterning

Cell-material interactions constitute a key fundamental topic in biomaterials study. Various cell cues and matrix cues as well as soluble factors regulate cell behaviors on materials. These factors are coupled with each other as usual, and thus it is very difficult to unambiguously elucidate the role of each regulator. The recently developed material techniques of surface patterning afford unique ways to reveal the underlying science. This paper reviews the pertinent material techniques to fabricate patterns of microscale and nanoscale resolutions, and corresponding cell studies. Some issues are emphasized, such as cell localization on patterned surfaces of chemical contrast, and effects of cell shape, cell size, cell-cell contact, and seeding density on differentiation of stem cells. Material cues to regulate cell adhesion, cell differentiation and other cell events are further summed up. Effects of some physical properties, such as surface topography and matrix stiffness, on cell behaviors are also discussed; nanoscaled features of substrate surfaces to regulate cell fate are summarized as well. The pertinent work sheds new insight into the cell-material interactions, and is stimulating for biomaterial design in regenerative medicine, tissue engineering, and high-throughput detection, diagnosis, and drug screening.

Enhancing the bioactivity of Poly(lactic-co-glycolic acid) scaffold with a nano-hydroxyapatite coating for the treatment of segmental bone defect in a rabbit model

PURPOSE

Poly(lactic-co-glycolic acid) (PLGA) is excellent as a scaffolding matrix due to feasibility of processing and tunable biodegradability, yet the virgin scaffolds lack osteoconduction and osteoinduction. In this study, nano-hydroxyapatite (nHA) was coated on the interior surfaces of PLGA scaffolds in order to facilitate in vivo bone defect restoration using biomimetic ceramics while keeping the polyester skeleton of the scaffolds.

METHODS

PLGA porous scaffolds were prepared and surface modification was carried out by incubation in modified simulated body fluids. The nHA coated PLGA scaffolds were compared to the virgin PLGA scaffolds both in vitro and in vivo. Viability and proliferation rate of bone marrow stromal cells of rabbits were examined. The constructs of scaffolds and autogenous bone marrow stromal cells were implanted into the segmental bone defect in the rabbit model, and the bone regeneration effects were observed.

RESULTS

In contrast to the relative smooth pore surface of the virgin PLGA scaffold, a biomimetic hierarchical nanostructure was found on the surface of the interior pores of the nHA coated PLGA scaffolds by scanning electron microscopy. Both the viability and proliferation rate of the cells seeded in nHA coated PLGA scaffolds were higher than those in PLGA scaffolds. For bone defect repairing, the radius defects had, after 12 weeks implantation of nHA coated PLGA scaffolds, completely recuperated with significantly better bone formation than in the group of virgin PLGA scaffolds, as shown by X-ray, Micro-computerized tomography and histological examinations.

CONCLUSION

nHA coating on the interior pore surfaces can significantly improve the bioactivity of PLGA porous scaffolds.

The effects of pore size in bilayered poly(lactide-co-glycolide) scaffolds on restoring osteochondral defects in rabbits

Bilayered porous scaffolds have recently attracted interest because of their considerable promise for repairing osteochondral defects. However, determination of optimal pore size in bilayered porous scaffolds remains an important issue. This study investigated the in vivo effects of pore size in bilayered scaffolds using a rabbit model of osteochondral defects. We fabricated five types of integrated bilayered poly(lactide-co-glycolide) (PLGA) scaffolds with different pore sizes in the chondral and osseous layers (50-100 µm, 100-200 µm, 200-300 µm, and 300-450 µm). A subset of bilayered scaffolds seeded with or without allogenic bone marrow mesenchymal stem cells (BMSCs) was implanted in rabbit osteochondral defects. All of the cell/scaffold composite constructs supported the simultaneous regeneration of articular cartilage and subchondral bone, but the best results were observed in cell-seeded PLGA scaffolds with 100-200 µm pores in the chondral layer and 300-450 µm pores in the osseous layer. Our study supports the concept that the effects of pore size on osteochondral repair should be taken into consideration during scaffold design for tissue engineering.

Fabrication of Photo-Polymerized PCL Tissue Engineering Scaffolds by Dynamic Masking Rapid Prototyping System

PCL is one of the popular biomaterials used in tissue engineering scaffolds, but it is seldom shaped by photo-polymerization. Layered manufacturing techniques, also known as Rapid Prototyping (RP) processes, provide a great opportunity to fabricate 3D scaffolds without problems such as limited control of pore-size and restricted geometric shapes in traditional methods. In our previous researches, the Biomedical Dynamic Masking Rapid Prototyping System was developed to photo-cure biodegradable materials through visible light. In this research, the Dynamic Masking RP System was modified to photo-polymerize cross-linkable PCL to form tissue engineering scaffolds. The cross-linkable PCL was synthesized by reacting PCL and acryloyl chloride, and dissolved in acetone mixing with photo-initiator. The tensile test and degradation test were performed on the cured PCL samples. Fabrication of single-layer pattern was first tested to understand the system’s capability and showed the errors were within 7%. Two types of scaffold design concepts were adopted—one took square, hexagon, or triangle as a basic element to create 2D grid patterns, and the interconnected pore were produced by offsetting the 2D pattern in alternating layers; the other took a double-sided trapezoid as a unit and arrayed it into tube shape with interconnected pore network. Various PCL porous tube scaffolds have been successfully fabricated in this study. In the future, they can be utilized to cell growth or mass cell duplication applications.

Imaging of poly(α-hydroxy-ester) scaffolds with X-ray phase-contrast microcomputed tomography

Porous scaffolds based on poly(α-hydroxy-esters) are under investigation in many tissue engineering applications. A biological response to these materials is driven, in part, by their three-dimensional (3D) structure. The ability to evaluate quantitatively the material structure in tissue-engineering applications is important for the continued development of these polymer-based approaches. X-ray imaging techniques based on phase contrast (PC) have shown a tremendous promise for a number of biomedical applications owing to their ability to provide a contrast based on alternative X-ray properties (refraction and scatter) in addition to X-ray absorption. In this research, poly(α-hydroxy-ester) scaffolds were synthesized and imaged by X-ray PC microcomputed tomography. The 3D images depicting the X-ray attenuation and phase-shifting properties were reconstructed from the measurement data. The scaffold structure could be imaged by X-ray PC in both cell culture conditions and within the tissue. The 3D images allowed for quantification of scaffold properties and automatic segmentation of scaffolds from the surrounding hard and soft tissues. These results provide evidence of the significant potential of techniques based on X-ray PC for imaging polymer scaffolds.

Poly(lactide-co-glycolide) porous scaffolds for tissue engineering and regenerative medicine

Porous scaffolds fabricated from biocompatible and biodegradable polymers play vital roles in tissue engineering and regenerative medicine. Among various scaffold matrix materials, poly(lactide-co-glycolide) (PLGA) is a very popular and an important biodegradable polyester owing to its tunable degradation rates, good mechanical properties and processibility, etc. This review highlights the progress on PLGA scaffolds. In the latest decade, some facile fabrication approaches at room temperature were put forward; more appropriate pore structures were designed and achieved; the mechanical properties were investigated both for dry and wet scaffolds; a long time biodegradation of the PLGA scaffold was observed and a three-stage model was established; even the effects of pore size and porosity on in vitro biodegradation were revealed; the PLGA scaffolds have also been implanted into animals, and some tissues have been regenerated in vivo after loading cells including stem cells.

A porous Cu/LDPE composite for copper-containing intrauterine contraceptive devices

To improve the rates of both cupric ion release and the utilization of copper in non-porous copper/low-density polyethylene (Cu/LDPE) composite, a porous Cu/LDPE composite is proposed and developed in the present work. Here 2,5-di-tert-butylhydroquinone was chosen as the porogen, ethyl acetate was chosen as the solvent for extraction, and the porous Cu/LDPE composite was obtained by using injection molding and the particulate leaching method. After any residual ethyl acetate remaining inside the porous Cu/LDPE composite had been removed by vacuum drying, the composite was characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry and absorption measurement. For comparison, a non-porous Cu/LDPE composite was also characterized in the same way. The results show that the porous structure was successfully introduced into the polymeric base of the non-porous Cu/LDPE composite, and the porous Cu/LDPE composite is a simple hybrid of copper particles and porous LDPE. The results also show that the introduction of a porous structure can improve the cupric ion release rate of the non-porous Cu/LDPE composite with a certain content of copper particles, indicating that the utilization rate of copper can be improved either the introduction of a porous structure, and that the porous Cu/LDPE composite is another promising material for copper-containing intrauterine devices.

Poly(ε-caprolactone) and poly(D,L-lactic acid-co-glycolic acid) scaffolds used in bone tissue engineering prepared by melt compression-particulate leaching method

Porous bioresorbable polymers have been widely used as scaffolds in tissue engineering. Most of the bioresorbable scaffolds are aliphatic polyesters and the methods employed to prepare the porous morphology may vary. This work describes and evaluates the in vitro degradation of porous and dense scaffolds of poly(ε-caprolactone) (PCL) and poly(D,L-lactic acid-co-glycolic acid) (50/50) (PLGA50) prepared by particulate leaching-melt compression process. Biological evaluation was carried out using osteoblast cell cultures. The results showed an autocatalytic effect on the dense samples. Osteoblasts presented intermediate adhesion and the cell morphology on the surface of these materials was dispersed, which indicated a good interaction of the cells with the surface and the material.

An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffolds

In this research, injection molding was combined with a novel material combination, supercritical fluid processing, and particulate leaching techniques to produce highly porous and interconnected structures that have the potential to act as scaffolds for tissue engineering applications. The foamed structures, molded with polylactide (PLA) and polyvinyl alcohol (PVOH) with salt as the particulate, were processed without the aid of organic solvents, which can be detrimental to tissue growth. The pore size in the scaffolds is controlled by salt particulates and interconnectivity is achieved by the co-continuous blending morphology of biodegradable PLA matrix with water-soluble PVOH. Carbon dioxide (CO(2)) at the supercritical state is used to serve as a plasticizer, thereby imparting moldability of blends even with an ultra high salt particulate content, and allows the use of low processing temperatures, which are desirable for temperature-sensitive biodegradable polymers. Interconnected pores of approximately 200 microm in diameter and porosities of approximately 75% are reported and discussed.

Dental implant systems

Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s) in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities.

PHBV microspheres--PLGA matrix composite scaffold for bone tissue engineering

Polymer scaffolds, particularly in the form of microspheres, have been employed to support cells growth and deliver drugs or growth factors in tissue engineering. In this study, we have established a scaffold by embedding poly (beta-hydroxybutyrate-co-beta-hydroxyvalerate) (PHBV) microspheres into poly (L-lactic-co-glycolic acid) (PLGA) matrix, according to their different solubility in acetone, with the aim of repairing bone defects. PLGA/PHBV scaffolds had good pore parameters, for example, the porosity of PLGA/30% PHBV scaffold can reach to 81.273 +/- 2.192%. Besides, the pore size distribution of the model was evaluated and the results revealed that the pore size mainly distributed between 50 mum and 200 mum. With increasing the amount of PHBV microspheres, the compressive strength of the PLGA/PHBV scaffold enhanced. The morphology of the hybrid scaffold was rougher than that of pure PLGA scaffold, which had no significant effect on the cell behavior. The in vitro evaluation suggested that the model is suitable as a scaffold for engineering bone tissue, and has the potential for further applications in drug delivery system.