In situ cross-linkable hyaluronic acid hydrogels prevent post-operative abdominal adhesions in a rabbit model

Injectable polyamide-amine dendrimer-crosslinked meloxicam-containing poly-γ-glutamic acid hydrogel for prevention of postoperative tissue adhesion through inhibiting inflammatory responses and balancing the fibrinolytic system

Establishing a physical barrier between the peritoneum and the cecum is an effective method to reduce the risk of postoperative abdominal adhesions. Meloxicam (MX), a nonsteroidal anti-inflammatory drug has also been applied to prevent postoperative adhesions. However, its poor water solubility has led to low bioavailability. Herein, we developed an injectable hydrogel as a barrier and drug carrier for simultaneous postoperative adhesion prevention and treatment. A third-generation polyamide-amine dendrimer (G3) was exploited to dynamically combine with MX to increase the solubility and the bioavailability. The formed G3@MX was further used to crosslink with poly-γ-glutamic acid (γ-PGA) to prepare a hydrogel (GP@MX hydrogel) through the amide bonding. In vitro and in vivo experiments evidenced that the hydrogel had good biosafety and biodegradability. More importantly, the prepared hydrogel could control the release of MX, and the released MX is able to inhibit inflammatory responses and balance the fibrinolytic system in the injury tissues in vivo. The tunable rheological and mechanical properties (compressive moduli: from ∼ 57.31 kPa to ∼ 98.68 kPa;) and high anti-oxidant capacity (total free radical scavenging rate of ∼ 94.56 %), in conjunction with their syringeability and biocompatibility, indicate possible opportunities for the development of advanced hydrogels for postoperative tissue adhesions management.

Engineering a Hydrazone and Triazole Crosslinked Hydrogel for Extrusion-Based Printing and Cell Delivery

Covalent adaptable crosslinks, such as the alkyl-hydrazone, endow hydrogels with unique viscoelastic properties applicable to cell delivery and bioink systems. However, the alkyl-hydrazone crosslink lacks stability in biologically relevant environments. Furthermore, when formed with biopolymers such as hyaluronic acid (HA), low molecular weight polymers (<60 kDa), or low polymer content (<2 wt%) hydrogels are typically employed as entanglements reduce injectability. Here, a high molecular weight (>60 kDa) HA alkyl-hydrazone crosslinked hydrogel is modified with benzaldehyde-poly(ethylene glycol)3-azide to incorporate azide functional groups. By reacting azide-modified HA with a multi-arm poly(ethylene glycol) (PEG) functionalized with bicyclononyne, stabilizing triazole bonds are formed through strain-promoted azide-alkyne cycloaddition (SPAAC). Increasing the fraction of triazole bonds within the hydrogel network from 0% to 12% SPAAC substantially increases stability. The slow gelation kinetics of the SPAAC reaction in the 12% SPAAC hydrogel enables transient self-healing properties and a similar extrusion force as the 0% SPAAC hydrogel. Methyl-PEG4-hydrazide is then introduced to further slowdown network evolution, which temporarily lowers the extrusion force, improves printability, and increases post-extrusion mesenchymal stem cell viability and function in the 12% SPAAC hydrogel. This work demonstrates improved stability and temporal injectability of high molecular weight HA-PEG hydrogels for extrusion-based printing and cell delivery.

Chemical modification of hyaluronic acid as a strategy for the development of advanced drug delivery systems

Hyaluronic acid (HA) has emerged as a promising biopolymer for various biomedical applications due to its biocompatibility, biodegradability, and intrinsic ability to interact with cell surface receptors, making it an attractive candidate for drug delivery systems and tissue engineering. Chemical modification of HA has opened up versatile possibilities to tailor its properties, enabling the development of advanced drug delivery systems and biomaterials with enhanced functionalities and targeted applications. This review analyzes the strategies and applications of chemically modified HA in the field of drug delivery and biomaterial development. The first part of the review focuses on the different methods and functional groups used for the chemical modification of HA, highlighting the impact of these modifications on its physicochemical properties, degradation behavior and interactions with drugs. The second part of the review evaluates the use of chemically modified HA in the development of advanced biomedical materials including nano- and microparticles, hydrogels and mucoadhesive materials with tailored drug release profiles, site-specific targeting and stimuli-responsive behavior. Thus, the review consolidates the current advances and future perspectives in the field of chemical modification of HA, underscoring its immense potential to drive the development of advanced drug delivery systems and biomaterials with diverse biomedical applications.

ROS-responsive sprayable hydrogel as ROS scavenger and GATA6+ macrophages trap for the prevention of postoperative abdominal adhesions

Postoperative abdominal adhesions are a common clinical problem after surgery and can cause many serious complications. Current most commonly used antiadhesion products are less effective due to their short residence time and focus primary on barrier function. Herein, we developed a sprayable hydrogel barrier (sHA-ADH/OHA-E) with self-regulated drug release based on ROS levels at the trauma site, to serve as a smart inflammatory microenvironment modulator and GATA6+ macrophages trap for non-adherent recovery from abdominal surgery. Sulfonated hyaluronic acid (HA) conjugates modified with adipic dihydrazide (sHA-ADH), and oxidized HA conjugates grafted with epigallocatechin-3-gallate (EGCG) via ROS-cleavable boronate bonds (OHA-E) were synthesized. sHA-ADH/OHA-E hydrogel was facilely fabricated within 5 s after simply mixing sHA-ADH and OHA-E through forming dynamic covalent acylhydrazones. With good biocompatibility, appropriate mechanical strength, tunable shear-thinning, self-healing, asymmetric adhesion, and reasonable in vivo retention time, sHA-ADH/OHA-E hydrogel meets the requirements of a perfect physical barrier. Intriguingly, sulfonic acid groups endowed the hydrogel with satisfactory anti-fibroblast and macrophage attachment capability, and were demonstrated for the first time to act as polyanion traps to prevent GATA6+ macrophages aggregation. Importantly, EGCG could be intelligently released by ROS triggering to alleviate oxidative stress and promote proinflammatory M1 macrophage polarize to antiinflammatory M2 phenotype. Further, the fibrinolytic system balance was restored to reduce fibrosis. Thanks to the above advantages, the sHA-ADH/OHA-E hydrogel exhibited excellent anti-adhesion effects in a rat sidewall defect-cecum abrasion model and is expected to be a promising and clinically translatable antiadhesion barrier.

A hybrid nanoparticle-protein hydrogel system for prolonged local anesthesia

Local anesthetics are effective in relieving pain, but their duration of action is short. Therefore, the development of injectable sustained release systems to prolong the effect of local anesthetics has been of interest. In such systems delivering conventional local anesthetics, it has been challenging to achieve long durations of effect, particularly without incurring tissue toxicity. To overcome these challenges, we created a platform comprising a protein hydrogel incorporating hydrophobic local anesthetic (bupivacaine) nanoparticles. The nanoparticles were prepared by anti-solvent precipitation stabilized with bovine serum albumin (BSA), followed by crosslinking with glutaraldehyde (GA). The resulting BSA hydrogels prolonged release of bupivacaine in vitro. When bupivacaine nanoparticles within crosslinked BSA were injected at the sciatic nerve in rats, a duration of nerve block of 39.9 h was obtained, compared to 5.5 h for the commercial bupivacaine liposome suspension EXPAREL®. Tissue reaction was benign. We further demonstrated that this system could control the release of the amphiphilic drug diphenhydramine and the hydrophobic paclitaxel.

Injectable, shear-thinning, photocrosslinkable, and tissue-adhesive hydrogels composed of diazirine-modified hyaluronan and dendritic polyethyleneimine

In the present study, we report the first synthesis of diazirine-modified hyaluronic acid (HA-DAZ). In addition, we also produced a precursor polymer solution composed of HA-DAZ and dendritic polyethyleneimine (DPI) that showed strong shear-thinning properties. Furthermore, its viscosity was strongly reduced (i.e., from 5 × 105 mPa s at 10-3 s-1 to 6 × 101 mPa s at 103 s-1), substantially, which enhanced solution injectability using a 21 G needle. After ultraviolet irradiation at 365 nm and 6 mW cm-2, the HA-DAZ/DPI solution achieved rapid gelation, as measured using the stirring method, and its gelation time decreased from 200 s to 9 s as the total concentrations of HA-DAZ and DPI increased. Following UV irradiation, the storage modulus increased from 40 to 200 Pa. In addition, reversible sol-gel transition and self-healing properties were observed even after UV irradiation. This suggests that the HA-DAZ/DPI hydrogel was crosslinked in multiple ways, i.e., via covalent bonding between the diazirine and amine groups and via intermolecular interactions, including hydrogen bonding, electrostatic interactions, and hydrophobic interactions. A lap shear test showed that the HA-DAZ/DPI hydrogel exhibited strong adhesiveness as a fibrin glue following UV irradiation. Finally, the HA-DAZ/DPI hydrogel showed higher tissue reinforcement than fibrin glue in an ex vivo burst pressure test of the porcine esophageal mucosa.

Statistical optimization of hydrazone-crosslinked hyaluronic acid hydrogels for protein delivery

Hydrazone-crosslinked hydrogels are attractive protein delivery vehicles for regenerative medicine. However, each regenerative medicine application requires unique hydrogel properties to achieve an ideal outcome. The properties of a hydrogel can be impacted by numerous factors involved in its fabrication. We used design of experiments (DoE) statistical modeling to efficiently optimize the physicochemical properties of a hyaluronic acid (HA) hydrazone-crosslinked hydrogel for protein delivery for bone regeneration. We modified HA with either adipic acid dihydrazide (HA-ADH) or aldehyde (HA-Ox) functional groups and used DoE to evaluate the interactions of three input variables, the molecular weight of HA (40 or 100 kDa), the concentration of HA-ADH (1-3% w/v), and the concentration of HA-Ox (1-3% w/v), on three output responses, gelation time, compressive modulus, and hydrogel stability over time. We identified 100 kDa HA-ADH3.00HA-Ox2.33 as an optimal hydrogel that met all of our design criteria, including displaying a gelation time of 3.7 minutes, compressive modulus of 62.1 Pa, and minimal mass change over 28 days. For protein delivery, we conjugated affinity proteins called affibodies that were specific to the osteogenic protein bone morphogenetic protein-2 (BMP-2) to HA hydrogels and demonstrated that our platform could control the release of BMP-2 over 28 days. Ultimately, our approach demonstrates the utility of DoE for optimizing hydrazone-crosslinked HA hydrogels for protein delivery.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Nanomaterials-incorporated hydrogels for 3D bioprinting technology

In the field of tissue engineering and regenerative medicine, various hydrogels derived from the extracellular matrix have been utilized for creating engineered tissues and implantable scaffolds. While these hydrogels hold immense promise in the healthcare landscape, conventional bioinks based on ECM hydrogels face several challenges, particularly in terms of lacking the necessary mechanical properties required for 3D bioprinting process. To address these limitations, researchers are actively exploring novel nanomaterial-reinforced ECM hydrogels for both mechanical and functional aspects. In this review, we focused on discussing recent advancements in the fabrication of engineered tissues and monitoring systems using nanobioinks and nanomaterials via 3D bioprinting technology. We highlighted the synergistic benefits of combining numerous nanomaterials into ECM hydrogels and imposing geometrical effects by 3D bioprinting technology. Furthermore, we also elaborated on critical issues remaining at the moment, such as the inhomogeneous dispersion of nanomaterials and consequent technical and practical issues, in the fabrication of complex 3D structures with nanobioinks and nanomaterials. Finally, we elaborated on plausible outlooks for facilitating the use of nanomaterials in biofabrication and advancing the function of engineered tissues.

Polyvinylpyrrolidone-Alginate Film Barriers for Abdominal Surgery: Anti-Adhesion Effect in Murine Model

Surgical operations on the peritoneum are often associated with the formation of adhesions, which can interfere with the normal functioning of the internal organs. The effectiveness of existing barrier materials is relatively low. In this work, the effectiveness of soluble alginate-polyvinylpyrrolidone (PVP-Alg) and non-soluble Ca ion cross-linked (PVP-Alg-Ca) films in preventing these adhesions was evaluated. Experiments in vivo were performed on mice via mechanical injury to the adjacent peritoneum wall and the caecum, followed by the application of PVP-Alg or PVP-Alg-Ca films to the injured area. After 7 days, samples from the peritoneal wall and caecum were analyzed using histology and quantitative polymerase chain reaction (qPCR). It was shown that the expression of genes responsible for adhesion formation in the caecum in the PVP-Alg group was comparable to that in the control group, while in the PVP-Alg-Ca group, it increased by 5-10 times. These results were consistent with the histology: in the PVP-Alg group, the adhesions did not form, while in the PVP-Alg-Ca group, the adhesions corresponded to five points on the adhesion scale. Therefore, the formation of intraperitoneal adhesions can be effectively prevented by non-crosslinked, biodegradable PVP-Alg films, whereas cross-linked, not biodegradable PVP-Alg-Ca films cause inflammation and adhesion formation.

Hybrid Shear-thinning Hydrogel Integrating Hyaluronic Acid with ROS-Responsive Nanoparticles

Nanoparticle (NP) supra-assembly offers unique opportunities to tune macroscopic hydrogels' mechanical strength, material degradation, and drug delivery properties. Here, synthetic, reactive oxygen species (ROS)-responsive NPs are physically crosslinked with hyaluronic acid (HA) through guest-host chemistry to create shear-thinning NP/HA hydrogels. A library of triblock copolymers composed of poly(propylene sulfide)-bl-poly(N,N-dimethylacrylamide)-bl-poly(N,N-dimethylacrylamide-co-N-(1-adamantyl)acrylamide) are synthesized with varied triblock architectures and adamantane grafting densities and then self-assembled into NPs displaying adamantane on their corona. Self-assembled NPs are mixed with β-cyclodextrin grafted HA to yield eighteen NP/HA hydrogel formulations. The NP/HA hydrogel platform demonstrates superior mechanical strength to HA-only hydrogels, susceptibility to oxidative/enzymatic degradation, and inherent cell-protective, antioxidant function. The performance of NP/HA hydrogels is shown to be affected by triblock architecture, guest/host grafting densities, and HA composition. In particular, the length of the hydrophilic second block and adamantane grafting density of self-assembled NPs significantly impacts hydrogel mechanical properties and shear-thinning behavior, while ROS-reactivity of poly(propylene sulfide) protects cells from cytotoxic ROS and reduces oxidative degradation of HA compared to HA-only hydrogels. This work provides insight into polymer structure-function considerations for designing hybrid NP/HA hydrogels and identifies antioxidant, shear-thinning hydrogels as promising injectable delivery platforms for small molecule drugs and therapeutic cells.

Statistical Optimization of Hydrazone-Crosslinked Hyaluronic Acid Hydrogels for Protein Delivery

Hydrazone-crosslinked hydrogels are attractive protein delivery vehicles for regenerative medicine. However, each regenerative medicine application requires unique hydrogel properties to achieve an ideal outcome. The properties of a hydrogel can be impacted by numerous factors involved in its fabrication. We used design of experiments (DoE) statistical modeling to efficiently optimize the physicochemical properties of a hyaluronic acid (HA) hydrazone-crosslinked hydrogel for protein delivery for bone regeneration. We modified HA with either adipic acid dihydrazide (HA-ADH) or aldehyde (HA-Ox) functional groups and used DoE to evaluate the interactions of three input variables, the molecular weight of HA (40 or 100 kDa), the concentration of HA-ADH (1-3% w/v), and the concentration of HA-Ox (1-3% w/v), on three output responses, gelation time, compressive modulus, and hydrogel stability over time. We identified 100 kDa HA-ADH3.0HA-Ox2.33 as an optimal hydrogel that met all of our design criteria, including displaying a gelation time of 3.7 minutes, compressive modulus of 62.1 Pa, and minimal mass change over 28 days. For protein delivery, we conjugated affinity proteins called affibodies that were specific to the osteogenic protein bone morphogenetic protein-2 (BMP-2) to HA hydrogels and demonstrated that our platform could control the release of BMP-2 over 28 days. Ultimately, our approach demonstrates the utility of DoE for optimizing hydrazone-crosslinked HA hydrogels for protein delivery.

pH-responsive nanocomposite hydrogel for simultaneous prevention of postoperative adhesion and tumor recurrence

Abdominal adhesion and tumor recurrence are two thorny problems in the postoperative treatment of abdominal tumors. Although important progress has been made in the application of hydrogels in adjuvant therapy after tumor surgery, most of the products can not effectively combine the prevention of abdominal adhesion and the removal of residual cancer cells. In this study, a nanocomposite hydrogel (Col-APG-Cys@HHD) was prepared by crosslinking collagen and recombinant albumin nanoparticles (HHD NPs) with aldehydeylated polyethylene glycol (APG6K) followed by immobilizing zwitterionic cysteine (Cys) to one surface. One surface of the hydrogel adhered to the postoperative wound due to the adhesive properties of collagen, while the other surface coated with cysteine formed a hydration layer to hinder the stick of proteins and cells, thereby reducing the adhesion between tissues. Additionally, Col-APG-Cys@HHD hydrogel disintegrated under acidic condition and released HHD NPs that targeted into cancer cells and released drugs in response to low pH environment. The in vivo experiments' results demonstrated that Col-APG-Cys@HHD hydrogel could prevent intraperitoneal adhesions and inhibit tumor growth with minimal side effects, providing a potential strategy for the hydrogel-based drug delivery system in postoperative adjuvant therapy of tumors. STATEMENT OF SIGNIFICANCE: Tissue adhesion and tumor recurrence usually occur after abdominal tumor surgery. Hydrogels have been widely studied in adjuvant treatment of abdominal tumors, but their synergy in terms of controllable drug release and anti-peritoneal adhesion still needs to be improved. Herein, a nanocomposite hydrogel (Col-APG-Cys@HHD) was designed and constructed with one side that was tissue adhesive and the other side as antifouling. Additionally, the Col-APG-Cys@HHD hydrogel showed controlled drug release behavior in response to a pH gradient (6.5 to 5.5). This was conducive to its dissociation in an acidic tumor environment followed by the release of nanoparticles that entered into tumor cells and delivered docetaxel . To sum up, the Col-APG-Cys@HHD hydrogel demonstrated synergistic therapy for prevention of abdominal adhesion and tumor recurrence after abdominal tumor surgery.

Salt sensitive purely zwitterionic physical hydrogel for prevention of postoperative tissue adhesion

Abdominal adhesions are a class of serious complications following abdominal surgery, resulting in a complicated and severe syndrome and sometimes leading to a Gordian knot. Traditional therapies employ hydrogels synthesized using complicated chemical formulations-often with click chemistry or thermal responsive hydrogel. The complicated synthesis process and severe conditions limit the extent of the hydrogels' applications. In this work, poly 3-[2-(methacryloyloxy)ethyl](dimethyl)-ammonio]-1-propanesulfonate (PSBMA) polymer was synthesized to self-assemble into physical hydrogels due to the inter- and intramolecular ion interactions. The strong static interaction bonding density has a substantial impact on the gelation and physicochemical properties, which is beneficial to clinical applications and offers a novel way to obtain the desired hydrogel for a specific biomedical application. Intriguingly, this PSBMA polymer can be customized into a transient network with outstanding antifouling capability depending on the ion concentration. As ion concentration increases, the PSBMA hydrogel dissociated completely, endowing it as a candidate for adhesion prevention. In the cecum-sidewall model, the PSBMA hydrogel demonstrated superior anti-adhesion properties than commercial HA hydrogel. Furthermore, we have demonstrated that this PSBMA hydrogel could inhibit the inflammatory response and encourage anti-fibrosis resulting in adhesion prevention. Most surprisingly, the recovered skins of cecum and sidewall are as smooth as the control skin without any scar and damage. In conclusion, a practical hydrogel was synthesized using a facile method based on purely zwitterionic materials, and this ion-sensitive, antifouling adjustable supramolecular hydrogel with great clinic transform potential is a promising barrier for preventing postoperative tissue adhesion. STATEMENT OF SIGNIFICANCE: The development of hydrogels with satisfactory coverage, long retention time, facile synthetic method, and good biocompatibility is vital for preventing peritoneal adhesions. Herein, we developed a salt sensitive purely zwitterionic physical hydrogel poly 3-[2-(methacryloyloxy)ethyl](dimethyl)-ammonio]-1-propanesulfonate (PSBMA) hydrogel to effectively prevent postoperative and recurrent abdominal adhesions. The hydrogel was simple to synthesize and easy to use. In the cecum-sidewall model, PSBMA hydrogel could instantaneously adhere and fix on irregular surfaces and stay in the wound for more than 10 days. The PSBMA hydrogel could inhibit the inflammatory response, encourage anti-fibrosis, and restore smoothness to damaged surfaces resulting in adhesion prevention. Overall, the PSBMA hydrogel is a promising candidate for the next generation of anti-adhesion materials to meet clinical needs.

Pirfenidone-loaded hyaluronic acid methacryloyl hydrogel for preventing epidural adhesions after laminectomy

It is inevitable that scar formation occurs between the spinal dura and surrounding tissues after laminectomy. While extensive epidural fibrosis, which results in limited nerve root activity and severe pain, is the main cause of postoperative failed-back surgery syndrome. Novel biomaterial loading effective drugs based on reasonable design are eagerly needed for the safe and effective prevention of epidural adhesions. We filtrated a suitable dose of pirfenidone (PFD) to load hyaluronic acid methacryloyl (HAMA) hydrogel in vitro. And then, we compare PFD-loaded HAMA hydrogel with only using PFD or HAMA hydrogels after laminectomy by in vivo studies in rats. We describe a safe and efficient anti-adhesive PFD-loaded HAMA hydrogel that prevents epidural fibrosis through the stable and sustained release of PFD. It was shown that the PFD-loaded HAMA hydrogel effectively inhibited cell penetration and suppressed collagen I/III expression. Thus, it effectively prevented the formation of adhesions through pharmacological and physical processes. The PFD-loaded HAMA hydrogel can effectively prevent adhesion formation in both pharmacological and physical barrier effects.

Oxidized hyaluronic acid/adipic acid dihydrazide hydrogel as cell microcarriers for tissue regeneration applications

Hyaluronic acid (HA) is a biopolymer present in various human tissues, whose degradation causes tissue damage and diseases. The oxidized hyaluronic acid/adipic acid dihydrazide (oxi-HA/ADH) hydrogels have attracted attention due to their advantages such as thermosensitivity, injectability, in situ gelation, and sterilization. However, studies are still scarce in the literature as microcarriers. In that sense, this work is a study of oxi-HA/ADH microparticles of 215.6 ± 2.7 µm obtained by high-speed shearing (18,000 rpm at pH 7) as cell microcarriers. Results showed that BALB/c 3T3 fibroblasts and adipose mesenchymal stem cells (h-AdMSC) cultured on the oxi-HA/ADH microcarriers presented a higher growth of both cells in comparison with the hydrogel. Moreover, the extrusion force of oxi-HA/ADH microparticles was reduced by 35% and 55% with the addition of 25% and 75% HA fluid, respectively, thus improving its injectability. These results showed that oxi-HA/ADH microcarriers can be a potential injectable biopolymer for tissue regeneration applications.

The Therapeutic Potential of Targeting Key Signaling Pathways as a Novel Approach to Ameliorating Post-Surgical Adhesions

BACKGROUND

Peritoneal adhesions (PA) are a common complication of abdominal operations. A growing body of evidence shows that inhibition of inflammation and fibrosis at sites of peritoneal damaging could prevent the development of intra-abdominal adhesions.

METHODS

A search of PubMed, Medline, CINAHL and Embase databases was performed using the keywords 'postsurgical adhesion', 'post-operative adhesion', 'peritoneal adhesion', 'surgery-induced adhesion' and 'abdominal adhesion'. Studies detailing the use of pharmacological and non-pharmacological agents for peritoneal adhesion prevention were identified, and their bibliographies were thoroughly reviewed to identify further related articles.

RESULTS

Several signaling pathways, such as tumor necrosis factor-alpha, tissue plasminogen activator, and type 1 plasminogen activator inhibitor, macrophages, fibroblasts, and mesothelial cells play a key part in the development of plasminogen activator. Several therapeutic approaches based on anti-PA drug barriers and traditional herbal medicines have been developed to prevent and treat adhesion formation. In recent years, the most promising method to prevent PA is treatment using biomaterial-based barriers.

CONCLUSION

In this review, we provide an overview of the pathophysiology of adhesion formation and various agents targeting different pathways, including chemical agents, herbal agents, physical barriers, and clinical trials concerning this matter.

Prevention of postoperative adhesion with a colloidal gel based on decyl group-modified Alaska pollock gelatin microparticles

Postoperative adhesion, bonding of the abdominal wall to damaged organs, causes severe complications after abdominal surgery. Despite the availability of physical barriers (i.e., solutions, films, and hydrogels), adhesion prevention materials that are a single-substance system with stability in wet tissue and ease of use have not been reported. Here, we report a microparticle based, sprayable adhesion prevention material comprising decyl group modified Alaska pollock gelatin (C10-ApGltn). C10-ApGltn microparticles (C10-MPs) were prepared by a coacervation method, freeze drying, and thermal crosslinking. The C10-MPs adhered to and formed a colloidal gel layer on intestinal serosal tissue by hydration without any crosslinking agents. After hydration of the C10-MPs, the resulting colloidal gel layer did not adhere to other tissues. Additionally, the C10-MP colloidal gel layer formed on the stomach serosal tissue showed stability when submersed in saline for 2 days. The colloidal gel layer also showed tissue followability. An in vivo rat adhesion model revealed that C10-MP colloidal gel layer on the cecum and abdominal wall defects effectively reduced postoperative adhesion and induced tissue remodeling, including re-mesothelialization. Therefore, C10-MPs are a potential anti-adhesion material for preventing postoperative adhesion. STATEMENT OF SIGNIFICANCE: We evaluated the postoperative adhesion prevention ability of a colloidal gel based on decyl group modified Alaska pollock gelatin (ApGltn) microparticles (C10-MPs). These microparticles are sprayable and form a colloidal gel with only hydration on the gastrointestinal tissue. We revealed that the modification of the decyl group into ApGltn improved the stability of C10-MP colloidal gel on the tissue by hydrophobic interaction in the in-vitro experiments. The gel prevented postoperative adhesion by being a physical barrier in the in-vivo rat adhesion model.

Barrier materials for prevention of surgical adhesions: systematic review

BACKGROUND

Postoperative surgical adhesions constitute a major health burden internationally. A wide range of materials have been evaluated, but despite constructive efforts and the obvious necessity, there remains no specific barrier widely utilized to prevent postoperative adhesion formation. The aim of this study was to highlight and characterize materials used for prevention of postoperative surgical adhesions in both animal and human studies.

METHODS

A systematic review was performed of all original research articles presenting data related to the prevention of postoperative adhesions using a barrier agent. All available observational studies and randomized trials using animal models or human participants were included, with no restrictions related to type of surgery. PubMed and Embase databases were searched using key terms from inception to August 2019. Standardized data collection forms were used to extract details for each study and assess desirable characteristics of each barrier and success in animal and/or human studies.

RESULTS

A total of 185 articles were identified for inclusion in the review, with a total of 67 unique adhesion barrier agents (37 natural and 30 synthetic materials). Desirable barrier characteristics of an ideal barrier were identified on review of the literature. Ten barriers achieved the primary outcome of reducing the incidence of postoperative adhesions in animal studies followed with positive outputs in human participants. A further 48 materials had successful results from animal studies, but with no human study performed to date.

DISCUSSION

Multiple barriers showed promise in animal studies, with several progressing to success, and fulfilment of desirable qualities, in human trials. No barrier is currently utilized commonly worldwide, but potential barriers have been identified to reduce the burden of postoperative adhesions and associated sequelae.

Islet Encapsulation: New Developments for the Treatment of Type 1 Diabetes

Islet transplantation is a promising approach for the treatment of type 1 diabetes (T1D). Currently, clinical islet transplantation is limited by allo - and autoimmunity that may cause partial or complete loss of islet function within a short period of time, and long-term immunosuppression is required to prevent rejection. Encapsulation into semipermeable biomaterials provides a strategy that allows nutrients, oxygen and secreted hormones to diffuse through the membrane while blocking immune cells and the like out of the capsule, allowing long-term graft survival and avoiding long-term use of immunosuppression. In recent years, a variety of engineering strategies have been developed to improve the composition and properties of encapsulation materials and to explore the clinical practicality of islet cell transplantation from different sources. In particular, the encapsulation of porcine islet and the co-encapsulation of islet cells with other by-standing cells or active ingredients for promoting long-term functionality, attracted significant research efforts. Hydrogels have been widely used for cell encapsulation as well as other therapeutic applications including tissue engineering, cell carriers or drug delivery. Here, we review the current status of various hydrogel biomaterials, natural and synthetic, with particular focus on islet transplantation applications. Natural hydrophilic polymers include polysaccharides (starch, cellulose, alginic acid, hyaluronic acid, chitosan) and peptides (collagen, poly-L-lysine, poly-L-glutamic acid). Synthetic hydrophilic polymers include alcohol, acrylic acid and their derivatives [poly (acrylic acid), poly (methacrylic acid), poly(acrylamide)]. By understanding the advantages and disadvantages of materials from different sources and types, appropriate materials and encapsuling methods can be designed and selected as needed to improve the efficacy and duration of islet. Islet capsule transplantation is emerging as a promising future treatment for T1D.

Cisplatin-Chelated Iminodiacetic Acid-Conjugated Hyaluronic Acid Nanogels for the Treatment of Malignant Pleural Mesothelioma in Mice

Malignant pleural mesothelioma (MPM) is one of the intractable cancers that require a more effective therapeutic strategy for clinical practice. Hyaluronic acid (HA) nanogels were prepared by the chelation of cisplatin (CDDP) with different molecular weights of iminodiacetic acid-conjugated hyaluronic acid (HA-IDA). The sizes of the 100, 850, and 2000 kDa HA nanogels were 33, 43, and 44 nm, respectively. MSTO-211H, a human MPM cell line, was more effective in taking up all three HA nanogels compared to AB22, a mouse MPM cell line. In addition, the 850 kDa HA nanogel showed higher anticancer activity against AB22 and MSTO-211H than 100 and 2000 kDa HA nanogels. Furthermore, all the HA nanogels showed a milder cytotoxic effect on normal Met-5A mesothelial cells compared to that exhibited by free CDDP. Finally, the 850 kDa HA nanogel was administrated intrapleurally into both the MSTO-211H xenograft and AB22 allograft mouse models of MPM using an injectable HA-based hydrogel. HA nanogels showed a significant therapeutic effect in both the xenograft and allograft models.

Anti-adhesive effect of chondrocyte-derived extracellular matrix surface-modified with poly-L-lysine (PLL)

After an injury, soft tissue structures in the body undergo a natural healing process through specific phases of healing. Adhesions occur as abnormal attachments between tissues and organs through the formation of blood vessels and/or fibrinous adhesions during the regenerative repair process. In this study, we developed an adhesion-preventing membrane with an improved physical protection function by modifying the surface of chondrocyte-derived extracellular matrices (CECM) with anti-adhesion function. We attempted to change the negative charge of the CECM surface to neutral using poly-L-lysine (PLL) and investigated whether it blocked fibroblast adhesion to it and showed an improved anti-adhesion effect in animal models of tissue adhesion. The surface of the membrane was modified with PLL coating (PLL 10), which neutralized the surface charge. We confirmed that the surface characteristics except for the potential difference were maintained after the modification and tested cell attachment in vitro. Adhesion inhibition was identified in a peritoneal adhesion animal model at 1 week and in a subcutaneous adhesion model for 4 weeks. N-CECM suppressed fibroblast and endothelial cell adhesion in vitro and inhibited abdominal adhesions in vivo. The CECM appeared to actively inhibit the infiltration of endothelial cells into the injured site, thereby suppressing adhesion formation, which differed from conventional adhesion barriers in the mode of action. Furthermore, the N-CECM remained intact without degradation for more than four weeks in vivo and exerted anti-adhesion effects for a long time. This study demonstrated that PLL10 surface modification rendered a neutral charge to the polymer on the extracellular matrix surface, thereby inhibiting cell and tissue adhesion. Furthermore, this study suggests a means to modify extracellular matrix surfaces to meet the specific requirements of the target tissue in preventing post-surgical adhesions. This article is protected by copyright. All rights reserved.

Physically Cross-Linked Hyaluronan-Based Ultrasoft Cryogel Prepared by Freeze-Thaw Technique as a Barrier for Prevention of Postoperative Adhesions

Postsurgical peritoneal adhesions are a common and serious postoperative complication after various peritoneal surgeries, such as pelvic and abdominal surgery. Various studies have shown that peritoneal adhesions can be minimized or prevented by physical anti-adhesion barriers, including membranes, knits, and hydrogels. Hydrogels have attracted great attention in preventing peritoneal adhesions because the dimensional architecture of hydrogels is similar to that of the native extracellular matrix. However, chemical cross-linkers had to be used in the preparation of chemical hydrogels, which may have problems in cytotoxicity or unwanted side effects. This fact prompts us to create alternative cross-linking methods for the development of biocompatible hydrogels as physical barriers. Herein, we report a physically cross-linked flexible hyaluronan (HA) cryogel prepared via a freeze-thaw technique as a novel anti-adhesion biomaterial for completely preventing postsurgical peritoneal adhesions. In vitro studies demonstrated that this physically cross-linked HA cryogel exhibited excellent biocompatibility, the inherently desirable biocompatibility and functionality of HA being integrally retained as much as possible. Intriguingly, the rheological properties and appropriate biodegradability of the cryogels were readily tailored and tunable by way of the gelation process. In vivo assessments suggested that the cryogel, as a physical barrier, satisfactorily prevented fibroblast penetration and attachment between the injured tissues and nearby normal organs. Furthermore, the molecular mechanism studies revealed that the HA cryogel could prevent peritoneal adhesion by inhibiting inflammatory response and modulation of the fibrinolytic system. Our results show that HA ultrasoft cryogel is a promising clinical candidate for prolonged adhesion prevention.

Prevention of Post-Operative Adhesions: A Comprehensive Review of Present and Emerging Strategies

Post-operative adhesions affect patients undergoing all types of surgeries. They are associated with serious complications, including higher risk of morbidity and mortality. Given increased hospitalization, longer operative times, and longer length of hospital stay, post-surgical adhesions also pose a great financial burden. Although our knowledge of some of the underlying mechanisms driving adhesion formation has significantly improved over the past two decades, literature has yet to fully explain the pathogenesis and etiology of post-surgical adhesions. As a result, finding an ideal preventative strategy and leveraging appropriate tissue engineering strategies has proven to be difficult. Different products have been developed and enjoyed various levels of success along the translational tissue engineering research spectrum, but their clinical translation has been limited. Herein, we comprehensively review the agents and products that have been developed to mitigate post-operative adhesion formation. We also assess emerging strategies that aid in facilitating precision and personalized medicine to improve outcomes for patients and our healthcare system.

Nanocomposite hyaluronic acid-based hydrogel for the treatment of esophageal fistulas

Fistulas are abnormal connections between two body parts that can impair the quality of life. The use of biological glues represents the least invasive procedure to fill the fistula; however, it is limited by the need of multiple injections, the persistence of infection and the failure in the treatment of high-output fistulas. We describe herein the use of an injectable nanocomposite hydrogel that is able to form in situ a tissue-mimicking matrix as an innovative material for the treatment of esophageal fistulas. Injectable hydrogels that have the dual advantage of being implantable with a minimally invasive approach and of adapting their shape to the target cavity, while the introduction of mesoporous silica nanoparticles opens the possibility of drug/biomolecules delivery.

The hydrogel is based on hyaluronic acid (HA), the crosslinking process occurs at physiological conditions leading to a hydrogel made of >96% by water and with a large-pore micro-architecture. The kinetic profile of the hydrogel formation is studied as a function of HA molecular weight and concentration with the aim of designing a material that is easily injectable with an endoscopic needle, is formed in a time compatible with the surgical procedure and has final mechanical properties suitable for cell proliferation. The in vivo experiments (porcine model) on esophageal-cutaneous fistulas, showed improved healing in the animals treated with the hydrogel compared with the control group.

A review: progress in preventing tissue adhesions from a biomaterial perspective

Postoperative adhesions (POA) are one of the main problems suffered by patients and are a common complaint. It is considered to be closely associated with the healing mechanism of damaged tissues. Tissue adhesions accompany other symptoms such as inflammation, pain, and even dyskinesia under certain conditions, compromising the patients' quality of life. On the other hand, common treatments involve high costs, re-surgery or long-term hospital stays. Therefore, alternative approaches need to be formulated so that aforementioned problems can be resolved. To this end, a review of recent advances in this context is imperative. In this review, we have highlighted the mechanism of adhesion formation, advances in common therapeutic approaches, and prospective treatments in preventing tissue adhesions. Based on the literature, it can be determined that the disadvantages of available commercial products in the treatment of tissue adhesion have led researchers to utilize alternative methods for designing anti-adhesive products with different structures such as electrospun fibrous mats, hydrogels, and nanospheres. These studies are on the fast track in producing optimal anti-adhesion materials. We hope that this article can attract attention by showing various mechanisms and solutions involved in adhesion problems and inspire the further development of anti-adhesion biomaterials.

Biodegradable Zwitterionic Cream Gel for Effective Prevention of Postoperative Adhesion

Postoperative peritoneal adhesions were frequent complications for almost any types of abdominal and pelvic surgery. This led to numerous medical problems and huge financial burden to the patients. Current anti-adhesion strategies focused mostly on physical barriers including films and hydrogels. However, they can only alleviate or reduce adhesions to certain level and their applying processes were far from ideal. This work reported the development of a biodegradable zwitterionic cream gel presenting a series of characters for an idea anti-adhesion material, including unique injectable yet malleable and self-supporting properties, which enabled an instant topical application, no curing, waiting or suturing, no hemostasis requirement, protein/cell resistance and biodegradability. The cream gel showed a major advancement in anti-adhesion efficacy by completely and reliably preventing a primary and a more severe recurrent adhesion in rat models.

Techno-Economic Analysis of a Hyaluronic Acid Production Process Utilizing Streptococcal Fermentation

Hyaluronic acid (HA) is a polysaccharide of alternating d-glucuronic acid and N-acetyl-d-glucosamine residues present in the extracellular matrix of connective, epithelial, and nervous tissues. Due to its singular hydrating, rheological and adhesive properties, HA has found numerous cosmetic and medical applications. However, techno-economic analyses of high value-added bioproducts such as HA are scarce in the literature. Here, we present a techno-economic analysis of a process for producing HA using Streptococcus zooepidemicus, simulated in SuperPro Designer. In the baseline scenario, HA is produced by batch fermentation, reaching 2.5 g/L after 24 h. It is then centrifuged, diafiltered, treated with activated carbon and precipitated with isopropanol. The product is suitable for topical formulations and its production cost was estimated as 1115 $/kg. A similar scenario, based on fed-batch culture and assuming a titer of 5.0 g/L, led to a lower cost of 946 $/kg. Moreover, in two additional scenarios, 10% of the precipitated HA is diverted to the production of a highly pure and high-molecular weight HA, suitable for injectable applications. These scenarios resulted in higher capital and operating costs, but also in higher profits, because HA for injectable use has a higher selling price that more than compensates for its higher production costs.

Advancement of Biomaterial-Based Postoperative Adhesion Barriers

Postoperative peritoneal adhesion (PPA) is a prevalent incidence that generally happens during the healing process of traumatized tissues. It causes multiple severe complications such as intestinal obstruction, chronic abdominal pain, and female infertility. To prevent PPA, several antiadhesion materials and drug delivery systems composed of biomaterials are used clinically, and clinical antiadhesive is one of the important applications nowadays. In addition to several commercially available materials, like film, spray, injectable hydrogel, powder, or solution type have been energetically studied based on natural and synthetic biomaterials such as alginate, hyaluronan, cellulose, starch, chondroitin sulfate, polyethylene glycol, polylactic acid, etc. Moreover, many kinds of animal adhesion models, such as cecum abrasion models and unitary horn models, are developed to evaluate new materials' efficacy. A new animal adhesion model based on hepatectomy and conventional animal adhesion models is recently developed and a new adhesion barrier by this new model is also developed. In summary, many kinds of materials and animal models are studied; thus, it is quite important to overview this field's current progress. Here, PPA is reviewed in terms of the species of biomaterials and animal models and several problems to be solved to develop better antiadhesion materials in the future are discussed.

Adhesion barriers in laparoscopic myomectomy: Evidence from randomized clinical trials

OBJECTIVE

To evaluate the effectiveness of different adhesion barriers in the prevention of de novo adhesion development after laparoscopic myomectomy.

METHODS

A systematic review was performed by searching seven electronic databases for all randomized clinical trials (RCTs) comparing the use of any absorbable adhesion barrier (i.e. intervention group) with either no treatment or placebo (i.e. control group) in the prevention of adhesion development after laparoscopic myomectomy.

RESULTS

Eight RCTs with a total of 748 participants (392 in the intervention group and 356 in the control group) were included. The assessed adhesion barrier methods were: oxidized regenerated cellulose (ORC) in two studies, auto-crosslinked hyaluronic acid (HA) gel in two studies, 4% icodextrin solution in one study, modified HA and carboxy-methylcellulose in one study, polyethylene glycol ester trilysine amine solution plus a borate buffer solution in one study, and polyethylene glycol amine plus dextran aldehyde polymers in another study.

CONCLUSION

Adhesion barrier methods showing the most promising results were: ORC, auto-crosslinked HA gel, and polyethylene glycol amine plus dextran aldehyde polymers.

Adhesive Catechol-Conjugated Hyaluronic Acid for Biomedical Applications: A Mini Review

Recently, catechol-containing polymers have been extensively developed as promising materials for surgical tissue adhesives, wound dressing, drug delivery depots, and tissue engineering scaffolds. Catechol conjugation to the polymer backbone provides adhesive properties to the tissue and does not significantly affect the intrinsic properties of the polymers. An example of a catecholic polymer is catechol-conjugated hyaluronic acid. In general, hyaluronic acid shows excellent biocompatibility and biodegradability; thus, it is used in various medical applications. However, hyaluronic acid alone has poor mechanical and tissue adhesion properties. Catechol modification considerably increases the mechanical and underwater adhesive properties of hyaluronic acid, while maintaining its biocompatibility and biodegradability and enabling its use in several biomedical applications. In this review, we briefly describe the synthesis and characteristics of catechol-modified hyaluronic acid, with a specific focus on catechol-involving reactions. Finally, we discuss the basic concepts and therapeutic effects of catechol-conjugated hyaluronic acid for biomedical applications.

Biocompatible and self-recoverable succinoglycan dialdehyde-crosslinked alginate hydrogels for pH-controlled drug delivery

We fabricated polysaccharide-based hydrogels, which are biocompatible, self-recoverable and pH-sensitive. Succinoglycan dialdehyde (SGDA) was first synthesized from bacterial succinoglycan directly isolated from Sinorhizobium meliloti and then hydrazine-functionalized alginate (HZ-Alg) was prepared to form SGDA-crosslinked alginate hydrogels (SGDA/HZ-Alg) without any catalyst. Due to structural characteristics of SGDA, SGDA/HZ-Alg were effectively obtained in a short time even at low concentrations (0.94-1.57 wt%) where they exhibited self-recoverable and tunable rheological properties corresponding to efficiency of recovery from 93.2%-97.9%. Moreover, SGDA/HZ-Alg showed the pH-responsive degradation as well as pH-controlled release behavior for 5-fluorouracil. 5-Fluorouracil was released approximately 98 % at pH 2.0 within 12 h, but not completely released even after 24 h at pH 7.4. The WST-8 assay results also demonstrated that SGDA/HZ-Alg did not show any cytotoxicity against HEK-293 cells. Since the suggested hydrogels are biocompatible, rheologically self-recoverable and tunable, and pH-controllable, they would be potential biomaterials for the hydrogel-based drug delivery systems.

Fouling-resistant zwitterionic polymers for complete prevention of postoperative adhesion

Postoperative adhesions are most common issues for almost any types of abdominal and pelvic surgery, leading to adverse consequences. Pharmacological treatments and physical barrier devices are two main approaches to address postoperative adhesions but can only alleviate or reduce adhesions to some extent. There is an urgent need for a reliable approach to completely prevent postoperative adhesions and to significantly improve the clinical outcomes, which, however, is unmet with current technologies. Here we report that by applying a viscous, cream-like yet injectable zwitterionic polymer solution to the traumatized surface, postoperative adhesion was completely and reliably prevented in three clinically relevant but increasingly challenging models in rats. The success rate of full prevention is over 93% among 42 animals tested, which is a major leap in antiadhesion performance. Clinically used Interceed film can hardly prevent the adhesion in any of these models. Unlike current antiadhesion materials serving solely as physical barriers, the "nonfouling" zwitterionic polymer functioned as a protective layer for antiadhesion applications with the inherent benefit of resisting protein/cell adhesions. The nonfouling nature of the polymer prevented the absorption of fibronectins and fibroblasts, which contribute to the initial and late-stage development of the adhesion, respectively. This is the key working mechanism that differentiated our "complete prevention" approach from current underperforming antiadhesion materials. This work implies a safe, effective, and convenient way to fully prevent postoperative adhesions suffered by current surgical patients.

Polymer microcapsules and microbeads as cell carriers for in vivo biomedical applications

Polymer microcarriers are being extensively explored as cell delivery vehicles in cell-based therapies and hybrid tissue and organ engineering. Spherical microcarriers are of particular interest due to easy fabrication and injectability. They include microbeads, composed of a porous matrix, and microcapsules, where matrix core is additionally covered with a semipermeable membrane. Microcarriers provide cell containment at implantation site and protect the cells from host immunoresponse, degradation and shear stress. Immobilized cells may be genetically altered to release a specific therapeutic product directly at the target site, eliminating side effects of systemic therapies. Cell microcarriers need to fulfil a number of extremely high standards regarding their biocompatibility, cytocompatibility, immunoisolating capacity, transport, mechanical and chemical properties. To obtain cell microcarriers of specified parameters, a wide variety of polymers, both natural and synthetic, and immobilization methods can be applied. Yet so far, only a few approaches based on cell-laden microcarriers have reached clinical trials. The main issue that still impedes progress of these systems towards clinical application is limited cell survival in vivo. Herein, we review polymer biomaterials and methods used for fabrication of cell microcarriers for in vivo biomedical applications. We describe their key limitations and modifications aiming at improvement of microcarrier in vivo performance. We also present the main applications of polymer cell microcarriers in regenerative medicine, pancreatic islet and hepatocyte transplantation and in the treatment of cancer. Lastly, we outline the main challenges in cell microimmobilization for biomedical purposes, the strategies to overcome these issues and potential future improvements in this area.

Implantation of a functional TEMPO-hydrogel induces recovery from rat spinal cord transection through promoting nerve regeneration and protecting bladder tissue

Spinal cord injury is one of the most serious traumatic diseases. The current available clinical therapies are unable to provide effective recovery of nerve functions. Implantation of biomaterial scaffolds is a promising approach to bridge the damaged nerve tissue in the absence of the extracellular matrix. However, the treatments have been impaired by the increased generation of reactive oxygen species in the microenvironment of acute spinal cord injury. Efficient delivery of antioxidants and biocompatible materials and reagents has been a challenge. Herein, a novel hyaluronic acid (HA) hydrogel functionalized with the antioxidant compound 2,2,6,6-tetramethylpiperidinyloxy (TEMPO) is fabricated for nerve tissue regeneration after serious spinal cord transection in rats. TEMPO is tethered onto HA chains to form HA-TEMPO through a Schiff base reaction between 4-amino-TEMPO and aldehyde modified HA chains. The TEMPO-hydrogel is constructed with a highly porous three-dimensional structure via the gelation between the residue aldehydes in HA-TEMPO and the amines in adipic dihydrazide modified HA. The functional TEMPO-hydrogel exhibits the antioxidant effect in an H2O2 simulated in vitro peroxidative microenvironment. Implantation of the functional hydrogel in vivo induces a significant motor function restoration, which could be attributed to the effective functions of the TEMPO-hydrogel in tissue reconnection as well as nerve fiber regeneration of the central nervous spinal cord tissue. Importantly, the treatment with the TEMPO-hydrogel effectively protects the bladder tissue from neurogenic damage. Therefore, the functional TEMPO-hydrogel provides a promising strategy for the treatment of central nervous system diseases through the antioxidant and lesion-bridging regulation of the pathological microenvironment.

Peritoneal adhesions: Occurrence, prevention and experimental models

Peritoneal adhesions (PA) are a postoperative syndrome with high incidence rate, which can cause chronic abdominal pain, intestinal obstruction, and female infertility. Previous studies have identified that PA are caused by a disordered feedback of blood coagulation, inflammation, and fibrinolysis. Monocytes, macrophages, fibroblasts, and mesothelial cells are involved in this process, and secreted signaling molecules, such as tumor necrosis factor alpha (TNF-α), interleukin-10 (IL-10), tissue plasminogen activator (tPA), and type 1 plasminogen activator inhibitor (PAI-1), play a key role in PA development. There have been many attempts to prevent PA formation by anti-PA drugs, barriers, and other therapeutic methods, but their effectiveness has not been widely accepted. Treatment by biomaterial-based barriers is believed to be the most promising method to prevent PA formation in recent years. In this review, the pathogenesis, treatment approaches, and animal models of PA are summarized and discussed to understand the challenges faced in the biomaterial-based anti-PA treatments.

Composite Hydrogel of Methacrylated Hyaluronic Acid and Fragmented Polycaprolactone Nanofiber for Osteogenic Differentiation of Adipose-Derived Stem Cells

Composite hydrogels with electrospun nanofibers (NFs) have recently been used to mimic the native extracellular matrix. In this study, composite hydrogels of methacrylated hyaluronic acid containing fragmented polycaprolactone NFs were used for bone tissue engineering. The composite (NF/hydrogel) was crosslinked under ultraviolet (UV) light. The incorporation of fragmented polycaprolactone NFs increased the compression modulus from 1762.5 to 3122.5 Pa. Subsequently, adipose-derived stem cells incorporated into the composite hydrogel exhibited a more stretched and elongated morphology and osteogenic differentiation in the absence of external factors. The mRNA expressions of osteogenic biomarkers, including collagen 1 (Col1), alkaline phosphatase, and runt-related transcription factor 2, were 3-5-fold higher in the composite hydrogel than in the hydrogel alone. In addition, results of the protein expression of Col1 and alizarin red staining confirmed osteogenic differentiation. These findings suggest that our composite hydrogel provides a suitable microenvironment for bone tissue engineering.

Anti-Inflammatory and Tissue Adhesion Properties of an α-Linolenic Acid-Modified Gelatin-Based In Situ Hydrogel

Poly unsaturated fatty acids (PUFAs)-natural chemicals derived from fish and nuts-have anti-inflammatory and antioxidative properties that are attributed to the inhibition of inflammatory pathways and the radical scavenging activity of their double bonds. In this study, Alaska pollock-derived gelatin (ApGltn), which has a low sol-gel transition temperature, was modified with α-linolenic acid (ALA) to obtain ALA-ApGltn, which was subsequently cross-linked to give a hydrogel (ALA-gel). Although the elastic modulus of ALA-gel and nonmodified ApGltn gel (Org-gel) was almost the same, ALA-gel exhibited a higher tan δ as well as a lower swelling ratio and enzymatic degradation rate than Org-gel. Moreover, ALA-gel showed enhanced tissue adhesive strength compared with a commercial fibrin adhesive. The concentration of a tumor necrosis factor (TNF)-α secreted from macrophage-like cells and the intracellular mitochondrial activity indicated that ALA-ApGltn exerted anti-inflammatory effects and maintained cell viability compared with the higher toxicity nonconjugated ALA. In addition, ALA-gel demonstrated suppressed formation of lamellipodia and secretion of TNF-α. ALA-gel therefore has potential as an adhesive biomaterial for wound sealing and treating burn injuries.

Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks

3D bioprinting involves the combination of 3D printing technologies with cells, growth factors and biomaterials, and has been considered as one of the most advanced tools for tissue engineering and regenerative medicine (TERM). However, despite multiple breakthroughs, it is evident that numerous challenges need to be overcome before 3D bioprinting will eventually become a clinical solution for a variety of TERM applications. To produce a 3D structure that is biologically functional, cell-laden bioinks must be optimized to meet certain key characteristics including rheological properties, physico-mechanical properties, and biofunctionality; a difficult task for a single component bioink especially for extrusion based bioprinting. As such, more recent research has been centred on multicomponent bioinks consisting of a combination of two or more biomaterials to improve printability, shape fidelity and biofunctionality. In this article, multicomponent hydrogel-based bioink systems are systemically reviewed based on the inherent nature of the bioink (natural or synthetic hydrogels), including the most current examples demonstrating properties and advances in application of multicomponent bioinks, specifically for extrusion based 3D bioprinting. This review article will assist researchers in the field in identifying the most suitable bioink based on their requirements, as well as pinpointing current unmet challenges in the field.

H-Bonding Supramolecular Hydrogels with Promising Mechanical Strength and Shape Memory Properties for Postoperative Antiadhesion Application

Development of a physical barrier with mechanical properties similar to human smooth muscle and an on-demand degradation profile is crucial for the clinical prevention of postoperative adhesion. Herein, a series of supramolecular hydrogels (PMI hydrogels) composed of poly(ethylene glycol) (PEG), methylenediphenyl 4, 4-diisocyanate (MDI), and imidazolidinyl urea (IU, hydrogen bonding reinforced factor) with biodegradability and high toughness are reported to serve as physical barriers for abdominal adhesion prevention. The tensile fracture strength and strain of the PMI hydrogels could be adjusted in the ranges of 0.6-2.3 MPa and 100-440%, respectively, and their Young's moduli (0.2-1.6 MPa) are close to that of human soft tissues like smooth muscle and skin tissue as well as they have outstanding shape memory properties. The PMI hydrogels show good cell and tissue biocompatibility, and the in vivo retention time is in accord with the needs for the postoperative antiadhesion physical barriers. Through an abdominal defect model on mice, this study shows that the PMI hydrogel can completely prevent tissue adhesion compared to the commercialized Seprafilm with high safety. Owing to the promising mechanical properties and good biocompatibility, the PMI hydrogels may be extended for various biomedical applications and the development of advanced flexible electronic devices.

Evaluation of the efficacy of platelet-rich plasma in preventing postoperative intraabdominal adhesions

Objectives

Postoperative intraabdominal adhesions still maintain their currency as serious causes of morbidity and mortality. This study aimed at evaluating the role of platelet-rich plasma (PRP) in the prevention of intraabdominal adhesions.

Material and Methods

A total of 16 healthy rabbits were used within the scope of the study. The animals were allocated into two groups as Group 1 (control group) and Group 2 (study group). In all subjects, cecal abrasion was formed by laparotomy. In the study group, platelet rich plasma was administered intraabdominally. At the end of the study, the adhesions were evaluated by Nair's Score.

Results

Total adhesion score in Group 1 was 8, while the mean score was 1. On the other hand, total adhesion score in Group 2 was 12, while the mean score was 1.5. There was no statistical difference between both groups by total adhesion score and mean fibrosis score. However, mean scores for inflammatory cell infiltration and angiogenesis were higher in Group 2 and the differences were statistically significant (p= 0.021).

Conclusion

We were not able to report the positive results of PRP; however, we believe that we shed an important light for future studies which might be conducted using the combination of different methods.

Imaging of Injectable Hydrogels Delivered into Myocardium with SPECT/CT

Injectable hydrogels are being widely explored for treatment after myocardial infarction (MI) through mechanical bulking or the delivery of therapeutics. Despite this interest, there have been few approaches to image hydrogels upon injection to identify their location, volume, and pattern of delivery, features that are important to understand toward clinical translation. Using a hyaluronic acid (HA) hydrogel as an example, the aim of this study is to introduce radiopacity to hydrogels by encapsulating a clinically used contrast agent (Omnipaque Iohexol, GE Healthcare) for imaging upon placement in the myocardium. Specifically, iohexol is encapsulated into shear-thinning and self-healing hydrogels formed through the mixing of HA-hydrazide and HA-aldehyde. Upon examination of a range of iohexol concentrations, a concentration of 100 mg mL-1 iohexol is deemed optimal based on the greatest contrast, while maintaining hydrogel mechanical properties and acceptable injection forces. In an acute porcine model of MI, hybrid single-photon emission computed tomography/computed tomography (SPECT/CT) perfusion imaging is performed immediately and 3-4 days after hydrogel delivery to assess radiopacity and verify the hydrogel location within the perfusion defect. Hybrid SPECT/CT imaging demonstrates excellent radiopacity of the hydrogel within the perfusion defect immediately after intramyocardial hydrogel injection, demonstrating the feasibility of this method for short-term noninvasive hydrogel monitoring.

Polysaccharide-based films for the prevention of unwanted postoperative adhesions at biological interfaces

Postoperative adhesions protect, repair, and supply nutrients to injured tissues; however, such adhesions often remain permanent and complicate otherwise successful surgeries by tethering tissues together that are normally separated. An ideal adhesion barrier should not only effectively prevent unwanted adhesions but should be easy to use, however, those that are currently available have inconsistent efficacy and are difficult to handle or to apply. A robust hydrogel film composed of alginate and a photo-crosslinkable hyaluronic acid (HA) derivative (glycidyl methacrylate functionalized hyaluronic acid (GMHA)) represents a solution to this problem. A sacrificial porogen (urea) was used in the film manufacture process to impart macropores that yield films that are more malleable and tougher than equivalent films produced without the sacrificial porogen. The robust mechanical behavior of these templated alginate/GMHA films directly facilitated handling characteristics of the barrier film. In a rat peritoneal abrasion model for adhesion formation, the polysaccharide films successfully prevented adhesions with statistical equivalence to the leading anti-adhesion technology on the market, Seprafilm®. STATEMENT OF SIGNIFICANCE: Postoperative adhesions often remain permanent and complicate otherwise successful surgeries by tethering tissues together that are normally separated and pose potentially significant challenges to patients. Therefore, the generation of adhesion barriers that are easy to deploy during surgery and effectively prevent unwanted adhesions is a big challenge. In this study robust hydrogel films composed of alginate and a photo-crosslinkable hyaluronic acid (HA) derivative (glycidyl methacrylate functionalized HA, GMHA) were fabricated and investigated for their potential to act as a solution to this problem using a rat peritoneal abrasion model for adhesion formation. We observed the polysaccharide films successfully prevented adhesions with statistical equivalence to the leading anti-adhesion technology on the market, Seprafilm®, suggesting that such films represent a promising strategy for the prevention of postoperative adhesions.

Thermal stimuli-responsive hyaluronic acid loaded cellulose based physical hydrogel for post-surgical de novo peritoneal adhesion prevention

Effective strategies for post-surgical adhesion prevention have increasingly focused on injectable adhesion barriers due to their minimal invasiveness and wider applicability. In this study, a thermo-reversible hydrogel was developed by combining high molecular weight hyaluronic acid (HA) at various concentrations (0.05, 0.25, and 0.45% w/v) with tempo-oxidized nanocellulose (TOCN), methyl cellulose (MC) and polyethylene glycol (PEG) for anti-adhesion application. The hydrogel preparation time was short and did not require any chemical modification. TOCN ensured the mechanical stability of the hydrogel. MC confirmed thermo-sensitive feature. Higher amounts of HA increased the rate of hydrogel degradation. The HA 0.25 hydrogel was free-flowing, injectable at ambient temperature, capable of faster (40 ± 2 s), and reversible sol-gel (4 °C-37 °C) transition. A rat side-wall cecum abrasion model was used to confirm the complete de novo adhesion prevention efficacy of optimized HA 0.25 hydrogel, where the scratched abdominal wall of animals treated with HA 0.25 hydrogel healed after 14 days. During in vivo experiment, PEG in the hydrogel played a crucial role in adhesion prevention by minimizing friction between the surgical site and nearby organs. In a nutshell, HA 0.25 hydrogel, fabricated without crosslinking agent, is a potential candidate for tissue adhesion prevention strategies.

A MnO2 Nanoparticle-Dotted Hydrogel Promotes Spinal Cord Repair via Regulating Reactive Oxygen Species Microenvironment and Synergizing with Mesenchymal Stem Cells

Spinal cord injury (SCI) is one of the most debilitating injuries, and transplantation of stem cells in a scaffold is a promising strategy for treatment. However, stem cell treatment of SCI has been severely impaired by the increased generation of reactive oxygen species in the lesion microenvironment, which can lead to a high level of stem cell death and dysfunction. Herein, a MnO₂ nanoparticle (NP)-dotted hydrogel is prepared through dispersion of MnO₂ NPs in a PPFLMLLKGSTR peptide modified hyaluronic acid hydrogel. The peptide-modified hydrogel enables the adhesive growth of mesenchymal stem cells (MSCs) and nerve tissue bridging. The MnO₂ NPs alleviate the oxidative environment, thereby effectively improving the viability of MSCs. Transplantation of MSCs in the multifunctional gel generates a significant motor function restoration on a long-span rat spinal cord transection model and induces an in vivo integration as well as neural differentiation of the implanted MSCs, leading to a highly efficient regeneration of central nervous spinal cord tissue. Therefore, the MnO₂ NP-dotted hydrogel represents a promising strategy for stem-cell-based therapies of central nervous system diseases through the comprehensive regulation of pathological microenvironment complications.