The effect of biphasic electrical stimulation on osteoblast function at anodized nanotubular titanium surfaces

d-α-tocopheryl polyethylene glycol 1000 succinate surface scaffold polysarcosine based polymeric nanoparticles of enzalutamide for the treatment of colorectal cancer: In vitro, in vivo characterizations

In this study, Enzalutamide (ENZ) loaded Poly Lactic-co-Glycolic Acid (PLGA) nanoparticles coated with polysarcosine and d-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS) were prepared using a three-step modified nanoprecipitation method combined with self-assembly. A three-factor, three-level Box-Behnken design was implemented with Design-Expert® software to evaluate the impact of three independent variables on particle size, zeta potential, and percent entrapment efficiency through a numeric optimization approach. The results were corroborated with ANOVA analysis, regression equations, and response surface plots. Field emission scanning electron microscopy and transmission electron microscope images revealed nanosized, spherical polymeric nanoparticles (NPs) with a size distribution ranging from 178.9 ± 2.3 to 212.8 ± 0.7 nm, a zeta potential of 12.6 ± 0.8 mV, and entrapment efficiency of 71.2 ± 0.7 %. The latter increased with higher polymer concentration. Increased polymer concentration and homogenization speed also enhanced drug entrapment efficiency. In vitro drug release was 85 ± 22.5 %, following the Higuchi model (R2 = 0.98) and Fickian diffusion (n < 0.5). In vitro cytotoxicity assessments, including Mitochondrial Membrane Potential Estimation, Apoptosis analysis, cell cycle analysis, Reactive oxygen species estimation, Wound healing assay, DNA fragmentation assay, and IC50 evaluation with Sulforhodamine B assay, indicated low toxicity and high efficacy of polymeric nanoparticles compared to the drug alone. In vivo studies demonstrated biocompatibility and target specificity. The findings suggest that TPGS surface-scaffolded polysarcosine-based polymer nanoparticles of ENZ could be a promising and safe delivery system with sustained release for colorectal cancer treatment, yielding improved therapeutic outcomes.

Electrical pulse stimulation parameters modulate N2a neuronal differentiation

Electrical pulse stimulation has been used to enhance the differentiation or proliferation of neuronal progenitor cells in tissue engineering and cancer treatment. Therefore, a comprehensive investigation of the effects caused by its parameters is crucial for improvements in those fields. We propose a study of pulse parameters, to allow the control of N2a cell line fate and behavior. We have focused on designing an experimental setup that allows for the knowledge and control over the environment and the stimulation signals applied. To map the effects of the stimulation on N2a cells, their morphology and the cellular and molecular reactions induced by the pulse stimulation have been analyzed. Immunofluorescence, rt-PCR and western blot analysis have been carried out for this purpose, as well as cell counting. Our results show that low-amplitude electrical pulse stimulation promotes proliferation of N2a cells, whilst amplitudes in the range 250 mV/mm-500 mV/mm induce differentiation. Amplitudes higher than 750 mV/mm produce cell damage at low frequencies. For high frequencies, large amplitudes are needed to cause cell death. An inverse relation has been found between cell density and pulse-induced neuronal differentiation. The best condition for neuronal differentiation was found to be 500 mV/mm at 100 Hz. These findings have been confirmed by up-regulation of the Neurod1 gene. Our preliminary study of the molecular effects of electrical pulse stimulation on N2a offers premonitory clues of the PI3K/Akt/GSK-3β pathway implications on the neuronal differentiation process through ES. In general, we have successfully mapped the sensitivity of N2a cells to electrical pulse stimulation parameters.

Electroconductivity, a regenerative engineering approach to reverse rotator cuff muscle degeneration

Muscle degeneration is one the main factors that lead to the high rate of retear after a successful repair of rotator cuff (RC) tears. The current surgical practices have failed to treat patients with chronic massive rotator cuff tears (RCTs). Therefore, regenerative engineering approaches are being studied to address the challenges. Recent studies showed the promising outcomes of electroactive materials (EAMs) on the regeneration of electrically excitable tissues such as skeletal muscle. Here, we review the most important biological mechanism of RC muscle degeneration. Further, the review covers the recent studies on EAMs for muscle regeneration including RC muscle. Finally, we will discuss the future direction toward the application of EAMs for the augmentation of RCTs.

Advanced surface engineering of titanium materials for biomedical applications: From static modification to dynamic responsive regulation

Titanium (Ti) and its alloys have been widely used as orthopedic implants, because of their favorable mechanical properties, corrosion resistance and biocompatibility. Despite their significant success in various clinical applications, the probability of failure, degradation and revision is undesirably high, especially for the patients with low bone density, insufficient quantity of bone or osteoporosis, which renders the studies on surface modification of Ti still active to further improve clinical results. It is discerned that surface physicochemical properties directly influence and even control the dynamic interaction that subsequently determines the success or rejection of orthopedic implants. Therefore, it is crucial to endow bulk materials with specific surface properties of high bioactivity that can be performed by surface modification to realize the osseointegration. This article first reviews surface characteristics of Ti materials and various conventional surface modification techniques involving mechanical, physical and chemical treatments based on the formation mechanism of the modified coatings. Such conventional methods are able to improve bioactivity of Ti implants, but the surfaces with static state cannot respond to the dynamic biological cascades from the living cells and tissues. Hence, beyond traditional static design, dynamic responsive avenues are then emerging. The dynamic stimuli sources for surface functionalization can originate from environmental triggers or physiological triggers. In short, this review surveys recent developments in the surface engineering of Ti materials, with a specific emphasis on advances in static to dynamic functionality, which provides perspectives for improving bioactivity and biocompatibility of Ti implants.

Improving Biocompatibility for Next Generation of Metallic Implants

The increasing need for joint replacement surgeries, musculoskeletal repairs, and orthodontics worldwide prompts emerging technologies to evolve with healthcare's changing landscape. Metallic orthopaedic materials have a shared application history with the aerospace industry, making them only partly efficient in the biomedical domain. However, suitability of metallic materials in bone tissue replacements and regenerative therapies remains unchallenged due to their superior mechanical properties, eventhough they are not perfectly biocompatible. Therefore, exploring ways to improve biocompatibility is the most critical step toward designing the next generation of metallic biomaterials. This review discusses methods of improving biocompatibility of metals used in biomedical devices using surface modification, bulk modification, and incorporation of biologics. Our investigation spans multiple length scales, from bulk metals to the effect of microporosities, surface nanoarchitecture, and biomolecules such as DNA incorporation for enhanced biological response in metallic materials. We examine recent technologies such as 3D printing in alloy design and storing surface charge on nanoarchitecture surfaces, metal-on-metal, and ceramic-on-metal coatings to present a coherent and comprehensive understanding of the subject. Finally, we consider the advantages and challenges of metallic biomaterials and identify future directions.

DC electrical stimulation enhances proliferation and differentiation on N2a and MC3T3 cell lines

Background

Electrical stimulation is a novel tool to promote the differentiation and proliferation of precursor cells. In this work we have studied the effects of direct current (DC) electrical stimulation on neuroblastoma (N2a) and osteoblast (MC3T3) cell lines as a model for nervous and bone tissue regeneration, respectively. We have developed the electronics and encapsulation of a proposed stimulation system and designed a setup and protocol to stimulate cell cultures.

Methods

Cell cultures were subjected to several assays to assess the effects of electrical stimulation on them. N2a cells were analyzed using microscope images and an inmunofluorescence assay, differentiated cells were counted and neurites were measured. MC3T3 cells were subjected to an AlamarBlue assay for viability, ALP activity was measured, and a real time PCR was carried out.

Results

Our results show that electrically stimulated cells had more tendency to differentiate in both cell lines when compared to non-stimulated cultures, paired with a promotion of neurite growth and polarization in N2a cells and an increase in proliferation in MC3T3 cell line.

Conclusions

These results prove the effectiveness of electrical stimulation as a tool for tissue engineering and regenerative medicine, both for neural and bone injuries. Bone progenitor cells submitted to electrical stimulation have a higher tendency to differentiate and proliferate, filling the gaps present in injuries. On the other hand, neuronal progenitor cells differentiate, and their neurites can be polarized to follow the electric field applied.

Long-term stimulation with alternating electric fields modulates the differentiation and mineralization of human pre-osteoblasts

Biophysical stimulation by electric fields can promote bone formation in bone defects of critical size. Even though, long-term effects of alternating electric fields on the differentiation of osteoblasts are not fully understood. Human pre-osteoblasts were stimulated over 31 days to gain more information about these cellular processes. An alternating electric field with 0.7 V_rms and 20 Hz at two distances was applied and viability, mineralization, gene expression, and protein release of differentiation factors were analyzed. The viability was enhanced during the first days of stimulation. A higher electric field resulted in upregulation of typical osteogenic markers like osteoprotegerin, osteopontin, and interleukin-6, but no significant changes in mineralization. Upregulation of the osteogenic markers could be detected with a lower electric field after the first days of stimulation. As a significant increase in the mineralized matrix was identified, an enhanced osteogenesis due to low alternating electric fields can be assumed.

Pulsed Electrical Stimulation Affects Osteoblast Adhesion and Calcium Ion Signaling

An extensive research field in regenerative medicine is electrical stimulation (ES) and its impact on tissue and cells. The mechanism of action of ES, particularly the role of electrical parameters like intensity, frequency, and duration of the electric field, is not yet fully understood. Human MG-63 osteoblasts were electrically stimulated for 10 min with a commercially available multi-channel system (IonOptix). We generated alternating current (AC) electrical fields with a voltage of 1 or 5 V and frequencies of 7.9 or 20 Hz, respectively. To exclude liquid-mediated effects, we characterized the AC-stimulated culture medium. AC stimulation did not change the medium’s pH, temperature, and oxygen content. The H2O2 level was comparable with the unstimulated samples except at 5 V_7.9 Hz, where a significant increase in H2O2 was found within the first 30 min. Pulsed electrical stimulation was beneficial for the process of attachment and initial adhesion of suspended osteoblasts. At the same time, the intracellular Ca2+ level was enhanced and highest for 20 Hz stimulated cells with 1 and 5 V, respectively. In addition, increased Ca2+ mobilization after an additional trigger (ATP) was detected at these parameters. New knowledge was provided on why electrical stimulation contributes to cell activation in bone tissue regeneration.

Autonomous push button-controlled rapid insulin release from a piezoelectrically activated subcutaneous cell implant

Traceless physical cues are desirable for remote control of the in situ production and real-time dosing of biopharmaceuticals in cell-based therapies. However, current optogenetic, magnetogenetic, or electrogenetic devices require sophisticated electronics, complex artificial intelligence-assisted software, and external energy supplies for power and control. Here, we describe a self-sufficient subcutaneous push button-controlled cellular implant powered simply by repeated gentle finger pressure exerted on the overlying skin. Pushing the button causes transient percutaneous deformation of the implant's embedded piezoelectric membrane, which produces sufficient low-voltage energy inside a semi-permeable platinum-coated cell chamber to mediate rapid release of a biopharmaceutical from engineered electro-sensitive human cells. Release is fine-tuned by varying the frequency and duration of finger-pressing stimulation. As proof of concept, we show that finger-pressure activation of the subcutaneous implant can restore normoglycemia in a mouse model of type 1 diabetes. Self-sufficient push-button devices may provide a new level of convenience for patients to control their cell-based therapies.

Electrical waveform dependent osteogenesis on PVDF/BaTiO3 composite using a customized and programmable cell stimulator

Directing cellular functionalities using biomaterial-based bioelectronic stimulation remains a significant constraint in translating research outcomes to address specific clinical challenges. Electrical stimulation is now being clinically used as a therapeutic treatment option to promote bone tissue regeneration and to improve neuromuscular functionalities. However, the nature of the electrical waveforms during the stimulation and underlying biophysical rationale are still not scientifically well explored. Furthermore, bone-mimicking implant-based bioelectrical regulation of osteoinductivity has not been translated to clinics. The present study demonstrates the role of the waveform in electrical signal to direct differentiation of stem cells on an electroactive polymeric substrate, using monophasic DC, square wave, and biphasic wave. In this regard, an in-house electrical stimulation device has been fabricated for the uninterrupted delivery of programmed electrical signals to stem cells in culture. To provide a functional platform for stem cells to differentiate, barium titanate (BaTiO₃ , BT) reinforced PVDF has been developed with mechanical properties similar to bone. The electrical stimulation of human mesenchymal stem cells (hMSCs) on PVDF/BT composite inhibited proliferation rate at day 7, indicating early commitment for differentiation. The phenotypical characteristics of DC stimulated hMSCs provided signatures of differentiation towards osteogenic lineage, which was subsequently confirmed using ALP assay, collagen deposition, matrix mineralization, and genetic expression. Our findings suggest that DC stimulation induced early osteogenesis in hMSCs with a higher level of intracellular reactive oxygen species (ROS), whereas the stimulation with square wave directed late osteogenesis with a lower ROS regeneration. In summary, the present study critically analyzes the role of electrical stimulation and its waveforms in regulating osteogenesis, without external biochemical differentiation inducers, on a bone-mimicking functional substrate. Such a strategy can potentially be adopted to develop orthopedic implant-based bioelectronic medicine for bone regeneration. This article is protected by copyright. All rights reserved.

Electrical stimulation of titanium to promote stem cell orientation, elongation and osteogenesis

Electrical stimulation of cells allows exogenous electric signals as stimuli to manipulate cell growth, preferential orientation and bone remodelling. In this study, commercially pure titanium discs were utilised in combination with a custom-built bioreactor to investigate the cellular responses of human mesenchymal stem cells via in-vitro functional assays. Finite element analysis revealed the homogeneous delivery of electric field in the bioreactor chamber with no detection of current density fluctuation in the proposed model. The custom-built bioreactor with capacitive stimulation delivery system features long-term stimulation with homogeneous electric field, biocompatible, sterilisable, scalable design and cost-effective in the manufacturing process. Using a continuous stimulation regime of 100 and 200 mV/mm on cp Ti discs, viability tests revealed up to an approximately 5-fold increase of cell proliferation rate as compared to non-stimulated controls. The human mesenchymal stem cells showed more elongated and differentiated morphology under this regime, with evidence of nuclear elongation and cytoskeletal orientation perpendicular to the direction of electric field. The continuous stimulation did not cause pH fluctuations and hydrogen peroxide production caused by Faradic reactions, signifying the suitability for long-term toxic free stimulation as opposed to the commonly used direct stimulation regime. An approximate of 4-fold increase in alkaline phosphatase production and approximately 9-fold increase of calcium deposition were observed on 200 mV/mm exposed samples relative to non-stimulated controls. It is worth noting that early stem cell differentiation and matrix production were observed under the said electric field even without the presence of chemical inductive growth factors. STATEMENT OF SIGNIFICANCE: This manuscript presents a study on combining pure titanium (primarily preferred as medical implant materials) and electrical stimulation in a purpose-built bioreactor with capacitive stimulation delivery system. A continuous capacitive stimulation regime on titanium disc has resulted in enhanced stem cell orientation, nuclei elongation, proliferation and differentiation as compared to non-stimulated controls. We believe that this manuscript creates a paradigm for future studies on the evolution of healthcare treatments in the area of targeted therapy on implantable and wearable medical devices through tailored innovative electrical stimulation approach, thereby influencing therapeutic conductive and electroactive biomaterials research prospects and development.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

Nanoparticles and Nanostructured Surface Fabrication for Innovative Cranial and Maxillofacial Surgery

A novel strategy to improve the success of soft and hard tissue integration of titanium implants is the use of nanoparticles coatings made from basically any type of biocompatible substance, which can advantageously enhance the properties of the material, as compared to its similar bulk material. So, most of the physical methods approaches involve the compaction of nanoparticles versus micron-level particles to yield surfaces with nanoscale grain boundaries, simultaneously preserving the chemistry of the surface among different topographies. At the same time, nanoparticles have been known as one of the most effective antibacterial agents and can be used as effective growth inhibitors of various microorganisms as an alternative to antibiotics. In this paper, based on literature research, we present a comprehensive review of the mechanical, physical, and chemical methods for creating nano-structured titanium surfaces along with the main nanoparticles used for the surface modification of titanium implants, the fabrication methods, their main features, and the purpose of use. We also present two patented solutions which involve nanoparticles to be used in cranioplasty, i.e., a cranial endoprosthesis with a sliding system to repair the traumatic defects of the skull, and a cranial implant based on titanium mesh with osteointegrating structures and functional nanoparticles. The main outcomes of the patented solutions are: (a) a novel geometry of the implant that allow both flexible adaptation of the implant to the specific anatomy of the patient and the promotion of regeneration of the bone tissue; (b) porous structure and favorable geometry for the absorption of impregnated active substances and cells proliferation; (c) the new implant model fit 100% on the structure of the cranial defect without inducing mechanical stress; (d) allows all kinds of radiological examinations and rapid osteointegration, along with the patient recover in a shorter time.

Electrochemical methods to enhance osseointegrated prostheses

Osseointegrated (OI) prosthetic limbs have been shown to provide an advantageous treatment option for amputees. In order for the OI prosthesis to be successful, the titanium implant must rapidly achieve and maintain proper integration with the bone tissue and remain free of infection. Electrochemical methods can be utilized to control and/or monitor the interfacial microenvironment where the titanium implant interacts with the biological system (host bone tissue or bacteria). This review will summarize the current understanding of how electrochemical modalities can influence bone tissue and bacteria with specific emphasis on applications where the metallic prosthesis itself can be utilized directly as a stimulating electrode for enhanced osseointegration and infection control. In addition, a summary of electrochemical impedance sensing techniques that could be used to potentially assess osseointegration and infection status of the metallic prosthesis is presented.

Implantable electrical stimulation bioreactor with liquid crystal polymer-based electrodes for enhanced bone regeneration at mandibular large defects in rabbit

The osseous regeneration of large bone defects is still a major clinical challenge in maxillofacial and orthopedic surgery. Previous studies demonstrated that biphasic electrical stimulation (ES) stimulates bone formation; however, polyimide electrode should be removed after regeneration. This study presents an implantable electrical stimulation bioreactor with electrodes based on liquid crystal polymer (LCP), which can be permanently implanted due to excellent biocompatibility to bone tissue. The bioreactor was implanted into a critical-sized bone defect and subjected to ES for one week, where bone regeneration was evaluated four weeks after surgery using micro-CT. The effect of ES via the bioreactor was compared with a sham control group and a positive control group that received recombinant human bone morphogenetic protein (rhBMP)-2 (20 μg). New bone volume per tissue volume (BV/TV) in the ES and rhBMP-2 groups increased to 132% (p < 0.05) and 174% (p < 0.01), respectively, compared to that in the sham control group. In the histological evaluation, there was no inflammation within the bone defects and adjacent to LCP in all the groups. This study showed that the ES bioreactor with LCP electrodes could enhance bone regeneration at large bone defects, where LCP can act as a mechanically resistant outer box without inflammation. Graphical abstract To enhance bone regeneration, a bioreactor comprising collagen sponge and liquid crystal polymer-based electrode was implanted in the bone defect. Within the defect, electrical current pulses having biphasic waveform were applied from the implanted bioreactor.

Electrical stimulation as a novel tool for regulating cell behavior in tissue engineering

Recently, electrical stimulation as a physical stimulus draws lots of attention. It shows great potential in disease treatment, wound healing, and mechanism study because of significant experimental performance. Electrical stimulation can activate many intracellular signaling pathways, and influence intracellular microenvironment, as a result, affect cell migration, cell proliferation, and cell differentiation. Electrical stimulation is using in tissue engineering as a novel type of tool in regeneration medicine. Besides, with the advantages of biocompatible conductive materials coming into view, the combination of electrical stimulation with suitable tissue engineered scaffolds can well combine the benefits of both and is ideal for the field of regenerative medicine. In this review, we summarize the various materials and latest technologies to deliver electrical stimulation. The influences of electrical stimulation on cell alignment, migration and its underlying mechanisms are discussed. Then the effect of electrical stimulation on cell proliferation and differentiation are also discussed.

Electrically polarized TiO2 nanotubes on Ti implants to enhance early-stage osseointegration

Ti is characteristically bioinert and is supplemented with modifications in surface topography and chemistry to find use in biomedical applications. The aim of this study is to understand the effects of surface charge on TiO2 nanotubes (TNT) on Ti implants towards early stage osseointegration. We hypothesize that charge storage on TNT will improve bioactivity and enhance early-stage osseointegration in vivo. Commercially pure Ti surface was altered by growing TNT via anodic oxidation followed by the introduction of surface charge through electrothermal polarization to form bioelectret. Our results indicate a stored charge of 37.15 ± 14 mC/cm2 for TNT surfaces. The polarized TNT (TNT-Ps) samples did not show any charge leakage up to 18 months, and improved wettability with a measured contact angle less than 1°. No cellular toxicity through osteoblast proliferation and differentiation in vitro were shown by the TNT-Ps. Enhanced new bone formation at 5 weeks post-implantation for the TNT-Ps in contrast to TNTs was observed in vivo. Histomorphometric analyses show ∼40% increase in mineralized bone formation around the TNT-P implants than the TNTs at 5 weeks, which is indicative of accelerated bone remodeling cycle. These results show that stored surface charge on TiO2 nanotubes helped to accelerate bone healing due to early-stage osseointegration in vivo. STATEMENT OF SIGNIFICANCE: To improve surface bioactivity of metallic biomaterials, various approaches have been proposed and implemented. Among them, stored surface charge has been explored to enhance biological responses for hydroxyapatite ceramics where charged surfaces show favorable bone tissue ingrowth. However, surface charge effects have not yet been explored as a way to mitigate bio-inertness of titanium. This study intends to understand novel integration of bioactive titania-nanotubes and charge storage as surface modification for titanium implants. Our results show excellent biological response due to surface charge on titania-nanotubes offering possibilities of faster healing particularly for patients with compromised bone health.

Promotion of the osteogenic activity of an antibacterial polyaniline coating by electrical stimulation

Electrical stimulation (ES) exhibits a positive role in promoting the cell activity of osteoblasts. Conducting polymers have the advantages of biocompatibility, good environmental stability and easy synthesis, which have been widely used as charge carriers for electrical stimulation; moreover, considering clinical applications, biomaterial-related infection is an important issue that needs to be solved. Thus, conducting polymers with both antibacterial and osteogenic properties are highly demanded for effect repair. However, it remains a challenge to combine these two characteristics efficiently in a simple way. Herein, an Ag-loaded poly(amide-amine) dendrimer was prepared by a simple chemical reduction procedure, which acted as a dopant for the polymerization of polyaniline (PANI) on biomedical titanium (Ti) sheets. The obtained PANI coating showed outstanding antibacterial properties against Gram-negative (E. coli) and Gram-positive (S. aureus) microbes with a 1000-fold increase when compared with that of pure Ti. In addition, note that the polymer coating together with ES facilitated the proliferation and differentiation of MC3T3. The alkaline phosphatase (ALP) activity and intracellular calcium content of the cells showed a 19.09% and 24.02% increase, respectively, when compared with the case of electrically stimulated Ti after 12 days. Moreover, the existence of PAMAM facilitated mineralization. The strategy developed herein is simple and can be easily manipulated, which shows potential applications in the coating of implants for hard tissue repair.

In vitro and in vivo evaluation of porous chitosan electret membrane for bone regeneration

A porous chitosan electret membrane, possessing a three-dimensional porous structure and surface charges, was developed using thermally induced phase separation method and grid-controlled corona charging. Results showed that surface charge release of porous electret membrane could be altered by varying charging voltage. Rat osteoblasts adhered well, and cell proliferation and differentiation were enhanced by porous electret membrane compared to porous uncharged membrane. Furthermore, rabbit calvarial defects model demonstrated that porous electret membrane promoted bone regeneration more significantly than porous uncharged membrane. Therefore, the porous chitosan electret membrane might be a promising material for bone regeneration and bone tissue engineering applications.

The effect of ordered and partially ordered surface topography on bone cell responses: a review

Current understanding of the role of ordered and partially ordered surface topography in bone cell responses for bone implant design.

Mediation of cellular osteogenic differentiation through daily stimulation time based on polypyrrole planar electrodes

In electrical stimulation (ES), daily stimulation time means the interacting duration with cells per day, and is a vital factor for mediating cellular function. In the present study, the effect of stimulation time on osteogenic differentiation of MC3T3-E1 cells was investigated under ES on polypyrrole (Ppy) planar interdigitated electrodes (IDE). The results demonstrated that only a suitable daily stimulation time supported to obviously upregulate the expression of ALP protein and osteogenesis-related genes (ALP, Col-I, Runx2 and OCN), while a short or long daily stimulation time showed no significant outcomes. These might be attributed to the mechanism that an ES induced transient change in intracellular calcium ion concentration, which was responsible for activating calcium ion signaling pathway to enhance cellular osteogenic differentiation. A shorter daily time could lead to insufficient duration for the transient change in intracellular calcium ion concentration, and a longer daily time could give rise to cellular fatigue with no transient change. This work therefore provides new insights into the fundamental understanding of cell responses to ES and will have an impact on further designing materials to mediate cell behaviors.

Enhanced neural stem cell functions in conductive annealed carbon nanofibrous scaffolds with electrical stimulation

Carbon-based nanomaterials have shown great promise in regenerative medicine because of their unique electrical, mechanical, and biological properties; however, it is still difficult to engineer 2D pure carbon nanomaterials into a 3D scaffold while maintaining its structural integrity. In the present study, we developed novel carbon nanofibrous scaffolds by annealing electrospun mats at elevated temperature. The resultant scaffold showed a cohesive structure and excellent mechanical flexibility. The graphitic structure generated by annealing renders superior electrical conductivity to the carbon nanofibrous scaffold. By integrating the conductive scaffold with biphasic electrical stimulation, neural stem cell proliferation was promoted associating with upregulated neuronal gene expression level and increased microtubule-associated protein 2 immunofluorescence, demonstrating an improved neuronal differentiation and maturation. The findings suggest that the integration of the conducting carbon nanofibrous scaffold and electrical stimulation may pave a new avenue for neural tissue regeneration.

"Steel-Concrete" Inspired Biofunctional Layered Hybrid Cage for Spine Fusion and Segmental Bone Reconstruction

In this paper we report a "steel-concrete" inspired layered hybrid spine cage combining a titanium mesh and a bioceramic scaffold, which were welded together through a bioglass bonding layer using a novel multistep manufacturing methodology including three-dimensional slip deposition, gel casting, freeze-drying, and cosintering. The interfacial welding strength achieved 27 ± 0.7 MPa, indicating an excellent structural integrity of the hybrid cage construct. The biocramic scaffold layer consisting of wollastonite and hydroxyapatite had an interconnected, highly porous structure with a pore size of 100-500 μm and a porosity of >85%, well fufilling the structural requirements of bone regeneration. Simulated body fluid immersion assay showed that the hybrid cage exhibited excellent biodegradability to facilitate rapid bone-like apatite formation. In vitro studies demonstrated that the bioceramic scaffold on the hybrid cage supported attachment, spreading, growth, and migration of bone/vessel-forming cells and triggered osteogenic differentiation of human mesenchymal stem cells. In vivo studies further suggested that the bioceramic scaffold on the hybrid cage could actively promote fast generation of new bone tissues within 12 weeks of implantation in a rabbit femoral condyle model. This study has provided a new design and fabrication methodology of hybrid cages by integrating strong mechanical properties with excellent biological activities including osteoinductivity and bone regeneration ability, for spine fusion and segmental bone reconstruction.

A Novel In Vitro System for Comparative Analyses of Bone Cells and Bacteria under Electrical Stimulation

Electrical stimulation is a promising approach to enhance bone regeneration while having potential to inhibit bacterial growth. To investigate effects of alternating electric field stimulation on both human osteoblasts and bacteria, a novel in vitro system was designed. Electric field distribution was simulated numerically and proved by experimental validation. Cells were stimulated on Ti6Al4V electrodes and in short distance to electrodes. Bacterial growth was enumerated in supernatant and on the electrode surface and biofilm formation was quantified. Electrical stimulation modulated gene expression of osteoblastic differentiation markers in a voltage-dependent manner, resulting in significantly enhanced osteocalcin mRNA synthesis rate on electrodes after stimulation with 1.4V_RMS. While collagen type I synthesis increased when stimulated with 0.2V_RMS, it decreased after stimulation with 1.4V_RMS. Only slight and infrequent influence on bacterial growth was observed following stimulations with 0.2V_RMS and 1.4V_RMS after 48 and 72 h, respectively. In summary this novel test system is applicable for extended in vitro studies concerning definition of appropriate stimulation parameters for bone cell growth and differentiation, bacterial growth suppression, and investigation of general effects of electrical stimulation.

In Vitro Bioactivity Study of RGD-Coated Titanium Alloy Prothesis for Revision Total Hip Arthroplasty

Total hip arthroplasty (THA) is a common procedure for the treatment of end-stage hip joint disease, and the demand for revision THA will double by 2026. Ti6Al4V (Titanium, 6% Aluminum, and 4% Vanadium) is a kind of alloy commonly used to make hip prothesis. To promote the osseointegration between the prothesis and host bone is very important for the revision THA. The peptide Arg-Gly-Asp (RGD) could increase cell attachment and has been used in the vascular tissue engineering. In this study, we combined the RGD with Ti6Al4V alloy using the covalent cross-linking method to fabricate the functional Ti6Al4V alloy (FTA). The distribution of RGD oligopeptide on the FTA was even and homogeneous. The FTA scaffolds could promote mouse osteoblasts adhesion and spreading. Furthermore, the result of RT-qPCR indicated that the FTA scaffolds were more beneficial to osteogenesis, which may be due to the improvement of osteoblast adhesion by the RGD oligopeptide coated on FTA. Overall, the FTA scaffolds developed herein pave the road for designing and building more efficient prothesis for osseointegration between the host bone and prothesis in revision THA.

Titania nanotubes for orchestrating osteogenesis at the bone-implant interface

Titanium implants can fail due to inappropriate biomechanics at the bone-implant interface that leads to suboptimal osseointegration. Titania nanotubes (TNTs) fabricated on Ti implants by the electrochemical process have emerged as a promising modification strategy to facilitate osseointegration. TNTs enable augmentation of bone cell functions at the bone-implant interface and can be tailored to incorporate multiple functionalities including the loading of active biomolecules into the nanotubes to target anabolic processes in bone conditions such as osteoporotic fractures. Advanced functions can be introduced, including biopolymers, nanoparticles and electrical stimulation to release growth factors in a desired manner. This review describes the application of TNTs for enhancing osteogenesis at the bone-implant interface, as an alternative approach to systemic delivery of therapeutic agents.

Osteogenic potential of human adipose-tissue-derived mesenchymal stromal cells cultured on 3D-printed porous structured titanium

Integration of porous metal prosthetics, which restore form and function of irreversibly damaged joints, into remaining healthy bone is critical for implant success. We investigated the biological properties of adipose-tissue-derived mesenchymal stromal/stem cells (AMSCs) and addressed their potential to alter the in vitro microenvironment of implants. We employed human AMSCs as a practical source for musculoskeletal applications because these cells can be obtained in large quantities, are multipotent, and have trophic paracrine functions. AMSCs were cultured on surgical-grade porous titanium disks as a model for orthopedic implants. We monitored cell/substrate attachment, cell proliferation, multipotency, and differentiation phenotypes of AMSCs upon osteogenic induction. High-resolution scanning electron microscopy and histology revealed that AMSCs adhere to the porous metallic surface. Compared to standard tissue culture plastic, AMSCs grown in the porous titanium microenvironment showed differences in temporal expression for genes involved in cell cycle progression (CCNB2, HIST2H4), extracellular matrix production (COL1A1, COL3A1), mesenchymal lineage identity (ACTA2, CD248, CD44), osteoblastic transcription factors (DLX3, DLX5, ID3), and epigenetic regulators (EZH1, EZH2). We conclude that metal orthopedic implants can be effectively seeded with clinical-grade stem/stromal cells to create a pre-conditioned implant.

Synergistic effect of exogeneous and endogeneous electrostimulation on osteogenic differentiation of human mesenchymal stem cells seeded on silk scaffolds

Bioelectrical regulation of bone fracture healing is important for many cellular events such as proliferation, migration, and differentiation. The aim of this study was to investigate the osteogenic differentiation potential of human mesenchymal stem cells (hMSCs) cultivated on silk scaffolds in response to different modes of electrostimulation (e.g., exogeneous and/or endogeneous). Endogeneous electrophysiology was altered through the use of monensin (10 nM) and glibenclamide (10 μM), along with external electrostimulation (60 kHz; 100-500 mV). Monensin enhanced the expression of early osteogenic markers such as alkaline phosphatase (ALP) and runt-related transcription factor 2 (RUNX-2). When exogeneous electrostimulation was combined with glibenclamide, more mature osteogenic marker upregulation based on bone sialoprotein expression (BSP) and mineralization was found. These results suggest the potential to exploit both exogeneous and endogeneous biophysical control of cell functions towards tissue-specific goals.

Conversion of titania (TiO2) into conductive titanium (Ti) nanotube arrays for combined drug-delivery and electrical stimulation therapy

The conversion of titania (TiO₂) nanotubes into titanium (Ti), while preserving their nanotubular structures is demonstrated for proposed application as bone implants and electrodes for combined local drug delivery and electrical stimulation therapy.

Effective parameters on conductivity of mineralized carbon nanofibers: an investigation using artificial neural networks

The aim of this study was to predict the effects of different parameters on the conductivity of mineralized PAN-based carbon nanofibers by the artificial neural network (ANN) method.

Nanotechnology for treating osteoporotic vertebral fractures

Osteoporosis is a serious public health problem affecting hundreds of millions of aged people worldwide, with severe consequences including vertebral fractures that are associated with significant morbidity and mortality. To augment or treat osteoporotic vertebral fractures, a number of surgical approaches including minimally invasive vertebroplasty and kyphoplasty have been developed. However, these approaches face problems and difficulties with efficacy and long-term stability. Recent advances and progress in nanotechnology are opening up new opportunities to improve the surgical procedures for treating osteoporotic vertebral fractures. This article reviews the improvements enabled by new nanomaterials and focuses on new injectable biomaterials like bone cements and surgical instruments for treating vertebral fractures. This article also provides an introduction to osteoporotic vertebral fractures and current clinical treatments, along with the rationale and efficacy of utilizing nanomaterials to modify and improve biomaterials or instruments. In addition, perspectives on future trends with injectable bone cements and surgical instruments enhanced by nanotechnology are provided.

Establishment of a novel in vitro test setup for electric and magnetic stimulation of human osteoblasts

When large defects occur, bone regeneration can be supported by bone grafting and biophysical stimuli like electric and magnetic stimulation (EMS). Clinically established EMS modes are external coils and surgical implants like an electroinductive screw system, which combines a magnetic and electric field, e.g., for the treatment of avascular bone necrosis or pseudarthrosis. For optimization of this implant system, an in vitro test setup was designed to investigate effects of EMS on human osteoblasts on different 3D scaffolds (based on calcium phosphate and collagen). Prior to the cell experiments, numerical simulations of the setup, as well as experimental validation, via measurements of the electric parameters induced by EMS were conducted. Human osteoblasts (3 × 10(5) cells) were seeded onto the scaffolds and cultivated. After 24 h, screw implants (Stryker ASNIS III s-series) were centered in the scaffolds, and EMS was applied (3 × 45 min per day at 20 Hz) for 3 days. Cell viability and collagen type 1 (Col1) synthesis were determined subsequently. Numerical simulation and validation showed an adequate distribution of the electric field within the scaffolds. Experimental measurements of the electric potential revealed only minimal deviation from the simulation. Cell response to stimulation varied with scaffold material and mode of stimulation. EMS-stimulated cells exhibited a significant decrease of metabolic activity in particular on collagen scaffolds. In contrast, the Col1/metabolic activity ratio was significantly increased on collagen and non-sintered calcium phosphate scaffolds after 3 days. Exclusive magnetic stimulation showed similar but nonsignificant tendencies in metabolic activity and Col1 synthesis. The cell tests demonstrate that the new test setup is a valuable tool for in vitro testing and parameter optimization of the clinically used electroinductive screw system. It combines magnetic and electric stimulation, allowing in vitro investigations of its influence on human osteoblasts.

Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation

A three-phase [nanocrystalline hydroxyapatite (HA), carbon nanotubes (CNT), mixed in a polymeric matrix of polycaprolactone (PCL)] composite scaffold produced by 3D printing is presented. The CNT content varied between 0 and 10 wt % in a 50 wt % PCL matrix, with HA being the balance. With the combination of three well-known materials, these scaffolds aimed at bringing together the properties of all into a unique material to be used in tissue engineering as support for cell growth. The 3D printing technique allows producing composite scaffolds having an interconnected network of square pores in the range of 450-700 μm. The 2 wt % CNT scaffold offers the best combination of mechanical behaviour and electrical conductivity. Its compressive strength of ∼4 MPa is compatible with the trabecular bone. The composites show typical hydroxyapatite bioactivity, good cell adhesion and spreading at the scaffolds surface, this combination of properties indicating that the produced 3D, three-phase, scaffolds are promising materials in the field of bone regenerative medicine. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1210-1219, 2016.

Biological strategies for improved osseointegration and osteoinduction of porous metal orthopedic implants

The biological interface between an orthopedic implant and the surrounding host tissue may have a dramatic effect upon clinical outcome. Desired effects include bony ingrowth (osseointegration), stimulation of osteogenesis (osteoinduction), increased vascularization, and improved mechanical stability. Implant loosening, fibrous encapsulation, corrosion, infection, and inflammation, as well as physical mismatch may have deleterious clinical effects. This is particularly true of implants used in the reconstruction of load-bearing synovial joints such as the knee, hip, and the shoulder. The surfaces of orthopedic implants have evolved from solid-smooth to roughened-coarse and most recently, to porous in an effort to create a three-dimensional architecture for bone apposition and osseointegration. Total joint surgeries are increasingly performed in younger individuals with a longer life expectancy, and therefore, the postimplantation lifespan of devices must increase commensurately. This review discusses advancements in biomaterials science and cell-based therapies that may further improve orthopedic success rates. We focus on material and biological properties of orthopedic implants fabricated from porous metal and highlight some relevant developments in stem-cell research. We posit that the ideal primary and revision orthopedic load-bearing metal implants are highly porous and may be chemically modified to induce stem cell growth and osteogenic differentiation, while minimizing inflammation and infection. We conclude that integration of new biological, chemical, and mechanical methods is likely to yield more effective strategies to control and modify the implant-bone interface and thereby improve long-term clinical outcomes.

Techniques for dental implant nanosurface modifications

PURPOSE

Dental implant has gained clinical success over last decade with the major drawback related to osseointegration as properties of metal (Titanium) are different from human bone. Currently implant procedures include endosseous type of dental implants with nanoscale surface characteristics. The objective of this review article is to summarize the role of nanotopography on titanium dental implant surfaces in order to improve osseointegration and various techniques that can generate nanoscale topographic features to titanium implants.

MATERIALS AND METHODS

A systematic electronic search of English language peer reviewed dental literature was performed for articles published between December 1987 to January 2012. Search was conducted in Medline, PubMed and Google scholar supplemented by hand searching of selected journals. 101 articles were assigned to full text analysis. Articles were selected according to inclusion and exclusion criterion. All articles were screened according to inclusion standard. 39 articles were included in the analysis.

RESULTS

Out of 39 studies, seven studies demonstrated that bone implant contact increases with increase in surface roughness. Five studies showed comparative evaluation of techniques producing microtopography and nanotopography. Eight studies concluded that osteoblasts preferably adhere to nano structure as compared to smooth surface. Six studies illustrated that nanotopography modify implant surface and their properties. Thirteen studies described techniques to produce nano roughness.

CONCLUSION

Modification of dental osseous implants at nanoscale level produced by various techniques can alter biological responses that may improve osseointegration and dental implant procedures.

Electrical stimulation to promote osteogenesis using conductive polypyrrole films

In this study, we developed an electrical cell culture and monitoring device. Polypyrrole (PPy) films with different resistances were fabricated as conductive surfaces to investigate the effect of substrate-mediated electrical stimulation. The physical and chemical properties of the devices, as well as their biocompatibilities, were thoroughly evaluated. These PPy films had a dark but transparent appearance, on which the surface cells could be easily observed. After treating with the osteogenic medium, rat bone marrow stromal cells cultured on the PPy films differentiated into osteoblasts. The cells grown on the PPy films had up-regulated osteogenic markers, and an alkaline phosphatase activity assay showed that the PPy films accelerated cell differentiation. Alizarin red staining and calcium analysis suggested that the PPy films promoted osteogenesis. Finally, PPy films were subjected to a constant electric field to elucidate the effect of electrical stimulation on osteogenesis. Compared with the untreated group, electrical stimulation improved calcium deposition in the extracellular matrix. Furthermore, PPy films with lower resistances allowed larger currents to stimulate the surface cells, which resulted in higher levels of mineralization. Overall, these results indicated that this system exhibited superior electroactivity with controllable electrical resistance and that it can be coated directly to produce medical devices with a transparent appearance, which should be beneficial for research on electrical stimulation for tissue regeneration.

In-vitro biocompatibility and corrosion resistance of strontium incorporated TiO2 nanotube arrays for orthopaedic applications

This article investigates the in-vitro biocompatibility and corrosion behaviour of strontium ion incorporated TiO2 nanotube arrays formed by anodization method for orthopaedic applications. The morphological studies were carried out using field emission scanning electron microscopy, atomic force microscopy, attenuated total reflectance fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and thin film X-ray diffraction techniques. The morphological investigation indicated that the length and the average diameter of nanotube were 2.1 ± 0.3 µm and 110 ± 4 nm, respectively. The wettability measurements showed that the TiO2 nanotube arrays have super wettability, as well as, strontium ion incorporated TiO2 nanotube arrays exhibited hydrophilic behaviour. Excellent in-vitro bioactivity was observed for TiO2 nanotube arrays with strontium ions. Electrochemical studies in Hank's solution showed that the TiO2 nanotube arrays with strontium ions have enhanced corrosion resistance.

Boron nitride nanotubes and primary human osteoblasts: in vitro compatibility and biological interactions under low frequency ultrasound stimulation

In this paper we investigated a novel and non-invasive approach for an endogenous osteoblast stimulation mediated by boron nitride nanotubes (BNNTs). Specifically, following the cellular uptake of the piezoelectric nanotubes, cultures of primary human osteoblasts (hOBs) were irradiated with low frequency ultrasound (US), as a simple method to apply a mechanical input to the cells loaded with BNNTs. This in vitro study was aimed at investigating the main interactions between hOBs and BNNTs and to study the effects of the 'BNNTs + US' stimulatory method on the osteoblastic function and maturation.A non-cytotoxic BNNT concentration to be used in vitro with hOB cultures was established. Moreover, investigation with transmission electron microscopy/electron energy loss spectroscopy (TEM/EELS) confirmed that BNNTs were internalized in membranal vesicles. The panel of investigated osteoblastic markers disclosed that BNNTs were capable of fostering the expression of late-stage bone proteins in vitro, without using any mineralizing culture supplements. In our samples, the maximal osteopontin expression, with the highest osteocalcin and Ca(2+) production, in the presence of mineral matrix with nodular morphology, was observed in the samples treated with BNNTs + US. In this group was also shown a significantly enhanced synthesis of TGF-β1, a molecule sensitive to electric stimulation in bone. Finally, gene deregulations of the analyzed osteoblastic genes leading to depletive cellular effects were not detected. Due to their piezoelectricity, BNNT-based therapies might disclose advancements in the treatment of bone diseases.

Enhanced regeneration of rabbit mandibular defects through a combined treatment of electrical stimulation and rhBMP-2 application

We evaluated the new bone regeneration of a rabbit mandibular defect using hBMSCs under electrical stimulation combined with rhBMP-2 in this study. An inner scaffold prepared by setting a collagen sponge with hBMSCs and hydrogel was placed into a polycaprolactone (PCL) outer box, and an electrical stimulation device was installed between the inner scaffold and the outer box. There were three experimental groups depending on electrical stimulation and application of rhBMP-2. The experimental group was divided into the following three groups. Group 1, in which rhBMP-2 (5 μg/defect) was added to hydrogel and electrical stimulation was not applied; Group 2, in which rhBMP-2 (5 μg/defect) was added as in Group 1 and electrical stimulation was applied; and Group 3, in which electrical stimulation was applied and rhBMP-2 (5 μg/defect) was injected directly into defect site. The delivered electrical stimulation was charge-balanced bi-phasic electric current pulses, and electrical stimulation was conducted for 7 days. The stimulation parameters of the bi-phasic electrical current set at an amplitude of 20 μA, a duration of 100 μs and a frequency of 100 Hz. Four weeks after surgery, new bone formation in each group was evaluated using radiography, histology, and micro-computed tomography (μCT). Groups 2 and 3 exhibited a significant increase in new bone formation compared to Group 1, while Group 3 showed the highest level of new bone regeneration. In a comparison between two groups, Group 2 showed a higher bone volume (BV) by 260 % (p < 0.01) compared with Group 1, and Group 3 showed a higher BV by 442 % (p < 0.01) compared with Group 1. The trend of the bone surface density (ratio of new bone to the real defect volume, BS/TV), trabecular number, and connectivity was identical to that of the BV. The total bone mineral density (BMD) of Groups 2 and 3 showed values higher by the ratios of 103 % (p < 0.01) and 107.5 % (p < 0.01) compared with Group 1, respectively. Part BMD for Groups 2 and 3 showed higher values by the ratios of 104.9 % (p < 0.01) and 122.4 % (p < 0.01) compared with Group 1, respectively. These results suggest that the combined treatment of electrical stimulation, hBMSCs, a collagen sponge, hydrogel, and rhBMP-2 was effective for bone regeneration of large-size mandibular defects. The application of rhBMP-2 with an injection following electrical stimulation demonstrated better efficiency as regards bone regeneration.