Hierarchical and non-hierarchical mineralisation of collagen

Collagen-hydroxyapatite based scaffolds for bone trauma and regeneration: recent trends and future perspectives

Regenerative therapy, a key area of tissue engineering, holds promise for restoring damaged organs, especially in bone regeneration. Bone healing is natural to the body but becomes complex under stress and disease. Large bone deformities pose significant challenges in tissue engineering. Among various methods, scaffolds are attractive as they provide structural support and essential nutrients for cell adhesion and growth. Collagen and hydroxyapatite (HA) are widely used due to their biocompatibility and biodegradability. Collagen and nano-scale HA enhance cell adhesion and development. Thus, nano HA/collagen scaffolds offer potential solutions for bone regeneration. This review focuses on the use and production of nano-sized HA/collagen composites in bone regeneration.

Advancing dentin remineralization: Exploring amorphous calcium phosphate and its stabilizers in biomimetic approaches

OBJECTIVE

This review elucidates the mechanisms underpinning intrafibrillar mineralization, examines various amorphous calcium phosphate (ACP) stabilizers employed in dentin's intrafibrillar mineralization, and addresses the challenges encountered in clinical applications of ACP-based bioactive materials.

METHODS

The literature search for this review was conducted using three electronic databases: PubMed, Web of Science, and Google Scholar, with specific keywords. Articles were selected based on inclusion and exclusion criteria, allowing for a detailed examination and summary of current research on dentin remineralization facilitated by ACP under the influence of various types of stabilizers.

RESULTS

This review underscores the latest advancements in the role of ACP in promoting dentin remineralization, particularly intrafibrillar mineralization, under the regulation of various stabilizers. These stabilizers predominantly comprise non-collagenous proteins, their analogs, and polymers. Despite the diversity of stabilizers, the mechanisms they employ to enhance intrafibrillar remineralization are found to be interrelated, indicating multiple driving forces behind this process. However, challenges remain in effectively designing clinically viable products using stabilized ACP and maximizing intrafibrillar mineralization with limited materials in practical applications.

SIGNIFICANCE

The role of ACP in remineralization has gained significant attention in dental research, with substantial progress made in the study of dentin biomimetic mineralization. Given ACP's instability without additives, the presence of ACP stabilizers is crucial for achieving in vitro intrafibrillar mineralization. However, there is a lack of comprehensive and exhaustive reviews on ACP bioactive materials under the regulation of stabilizers. A detailed summary of these stabilizers is also instrumental in better understanding the complex process of intrafibrillar mineralization. Compared to traditional remineralization methods, bioactive materials capable of regulating ACP stability and controlling release demonstrate immense potential in enhancing clinical treatment standards.

STMP and PVPA as Templating Analogs of Noncollagenous Proteins Induce Intrafibrillar Mineralization of Type I Collagen via PCCP Process

The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.

Elucidating the role of diverse mineralisation paradigms on bone biomechanics - a coarse-grained molecular dynamics investigation

Bone as a hierarchical composite structure plays a myriad of roles in vertebrate skeletons including providing the structural stability of the body. Despite this critical role, the mechanical behaviour at the sub-micron levels of bone's hierarchy remains poorly understood. At this scale, bone is composed of Mineralised Collagen Fibrils (MCF) embedded within an extra-fibrillar matrix that consists of hydroxyapatite minerals and non-collagenous proteins. Recent experimental studies hint at the significance of the extra-fibrillar matrix in providing the bone with the stiffness and ductility needed to serve its structural roles. However, due to limited resolution of experimental tools, it is not clear how the arrangement of minerals, and in particular their relative distribution between the intra- and extra-fibrillar space contribute to bone's remarkable mechanical properties. In this study, a Coarse Grained Molecular Dynamics (CGMD) framework was developed to study the mechanical properties of MCFs embedded within an extra-fibrillar mineral matrix and the precise roles extra- and intra-fibrillar mineralisation on the load-deformation response was investigated. It was found that the presence of extra-fibrillar mineral resulted in the development of substantial residual stress in the system, by limiting MCF shortening that took place during intra-fibrillar mineralisation, resulting in substantial compressive residual stresses in the extra-fibrillar mineral phase. The simulation results also revealed the crucial role of extra-fibrillar mineralisation in determining the elastic response of the Extrafibrillar mineralised MCF (EFM-MCF) system up to the yield point, while the fibrillar collagen affected the post-yield behaviour. When physiological levels of mineralisation were considered, the mechanical response of the EFM-MCF systems was characterised by high ductility and toughness, with micro-cracks being distributed across the extra-fibrillar matrix, and MCFs effectively bridging these cracks leading to an excellent combination of strength and toughness. Together, these results provide novel insight into the deformation mechanisms of an EFM-MCF system and highlight that this universal building block, which forms the basis for lamellar bone, can provide an excellent balance of stiffness, strength and toughness, achieving mechanical properties that are far beyond the capabilities of the individual constituents acting alone.

Nucleation Domains in Biomineralization: Biomolecular Sequence and Conformational Features

Biomolecules play a vital role in the regulation of biomineralization. However, the characteristics of practical nucleation domains are still sketchy. Herein, the effects of the representative biomolecular sequence and conformations on calcium phosphate (Ca-P) nucleation and mineralization are investigated. The results of computer simulations and experiments prove that the line in the arrangement of dual acidic/essential amino acids with a single interval (Bc (Basic) -N (Neutral) -Bc-N-Ac (Acidic)- NN-Ac-N) is most conducive to the nucleation. 2α-helix conformation can best induce Ca-P ion cluster formation and nucleation. "Ac- × × × -Bc" sequences with α-helix are found to be the features of efficient nucleation domains, in which process, molecular recognition plays a non-negligible role. It further indicates that the sequence determines the potential of nucleation/mineralization of biomolecules, and conformation determines the ability of that during functional execution. The findings will guide the synthesis of biomimetic mineralized materials with improved performance for bone repair.

A variable mineralization time and solution concentration intervene in the microstructure of biomimetic mineralized collagen and potential osteogenic microenvironment

The absence of a conducive bone formation microenvironment between fractured ends poses a significant challenge in repairing large bone defects. A promising solution is to construct a bone formation microenvironment that mimics natural bone tissue. Biomimetic mineralized collagen possesses a chemical composition and microstructure highly similar to the natural bone matrix, making it an ideal biomimetic bone substitute material. The microstructure of biomimetic mineralized collagen is influenced by various factors, and its biomineralization and microstructure, in turn, affect its physicochemical properties and biological activity. We aimed to utilize mineralization time and solution concentration as variables and employed the polymer-induced liquid precursor strategy to fabricate mineralized collagen with diverse microstructures, to shed light on how mineralization parameters impact the material microstructure and physicochemical properties. We also investigated the influence of microstructure and physicochemical properties on cell biocompatibility and the bone-forming microenvironment. Through comprehensive characterization, we examined the physical and chemical properties of I-EMC under various mineralization conditions and assessed the in vitro and in vivo biocompatibility and osteogenic performance. By investigating the relationship between mineralization parameters, material physicochemical properties, and osteogenic performance, we revealed how microstructures influence cellular behaviors like biocompatibility and osteogenic microenvironment. Encouragingly, mineralization solutions with varying concentrations, stabilized by polyacrylic acid, successfully produced intrafibrillar and extrafibrillar mineralized collagen. Compared to non-mineralized collagen, all mineralized samples demonstrated improved bone-forming performance. Notably, samples prepared with a 1× mineralization solution exhibited relatively smooth surfaces with even mineralization. Extending the mineralization time enhanced the degree of mineralization and osteogenic performance. Conversely, samples prepared with a 2× mineralization solution had rough surfaces with large calcium phosphate particles, indicating non-uniform mineralization. Overall, our research advances the potential for commercial production of mineralized collagen protein products, characterized by dual biomimetic properties, and their application in treating various types of bone defects.

Functionalization of biomimetic mineralized collagen for bone tissue engineering

Mineralized collagen (MC) is the basic unit of bone structure and function and is the main component of the extracellular matrix (ECM) in bone tissue. In the biomimetic method, MC with different nanostructures of neo-bone have been constructed. Among these, extra-fibrous MC has been approved by regulatory agencies and applied in clinical practice to play an active role in bone defect repair. However, in the complex microenvironment of bone defects, such as in blood supply disorders and infections, MC is unable to effectively perform its pro-osteogenic activities and needs to be functionalized to include osteogenesis and the enhancement of angiogenesis, anti-infection, and immunomodulation. This article aimed to discuss the preparation and biological performance of MC with different nanostructures in detail, and summarize its functionalization strategy. Then we describe the recent advances in the osteo-inductive properties and multifunctional coordination of MC. Finally, the latest research progress of functionalized biomimetic MC, along with the development challenges and future trends, are discussed. This paper provides a theoretical basis and advanced design philosophy for bone tissue engineering in different bone microenvironments.

Poly(acrylic acid)-Assisted Intrafibrillar Mineralization of Type I Collagen: A Review

The mineralization of type I collagen is a biological process occurring in vertebrates by which some hard tissues such as bone and dentin are constructed. Due to the extensive clinical needs for bone defect repair and remineralization of mineral-depleted dentin, biomimetic mineralization of collagen is attracting more and more interests. Synthetic analogs of noncollagenous proteins are necessary for directing the in vitro mineralization. In this paper, the function and mechanism of poly(acrylic acid) (PAA) in regulating the mineralization, especially intrafibrillar mineralization (IM) of collagen are reviewed. As two mineralization patterns (extrafibrillar and intrafibrillar) co-exist in natural hard tissues, differences between them in terms of microstructure, biodegradation, cytocompatibility, osteoinduction in vitro, and performance in vivo are systematically compared. Then the roles of PAA in biomimetic collagen IM within one-analog and two-analog systems are discussed, respectively. Moreover, mineralization of some self-mineralizable collagen matrices is described. Due to the interactions between collagen and PAA play a crucial role in the processes of collagen mineralization, some reference researches are also provided involving the collagen/PAA interactions in some other fields. Finally, this review is ended with an outlook for future potential improvements based on the collection of existing bottlenecks in this field.

Advanced application of collagen-based biomaterials in tissue repair and restoration

In tissue engineering, bioactive materials play an important role, providing structural support, cell regulation and establishing a suitable microenvironment to promote tissue regeneration. As the main component of extracellular matrix, collagen is an important natural bioactive material and it has been widely used in scientific research and clinical applications. Collagen is available from a wide range of animal origin, it can be produced by synthesis or through recombinant protein production systems. The use of pure collagen has inherent disadvantages in terms of physico-chemical properties. For this reason, a processed collagen in different ways can better match the specific requirements as biomaterial for tissue repair. Here, collagen may be used in bone/cartilage regeneration, skin regeneration, cardiovascular repair and other fields, by following different processing methods, including cross-linked collagen, complex, structured collagen, mineralized collagen, carrier and other forms, promoting the development of tissue engineering. This review summarizes a wide range of applications of collagen-based biomaterials and their recent progress in several tissue regeneration fields. Furthermore, the application prospect of bioactive materials based on collagen was outlooked, aiming at inspiring more new progress and advancements in tissue engineering research.

Graphical Abstract

Promoting effect of a calcium-responsive self-assembly β-sheet peptide on collagen intrafibrillar mineralization

Recently, a de novo synthetic calcium-responsive self-assembly β-sheet peptide ID8 (Ile-Asp-Ile-Asp-Ile-Asp-Ile-Asp) has been developed to serve as the template inducing hydroxyapatite nucleation. The aim of this study was to evaluate the effect of ID8 on intrafibrillar mineralization of collagen making full use of its self-assembly ability. The mineralization experiments were carried out in vitro on both bare Type I collagen and fully demineralized dentin samples. The calcium-responsive self-assembly of ID8 was revealed by circular dichroism spectrum, 8-anilino-1-naphthalenesulfonic acid ammonium salt hydrate assay, attenuated total reflection Fourier transform infrared spectrum (ATR-FTIR) and transmission electron microscope (TEM). Polyacrylic acid (450 kDa) with a concentration of 100 μg ml⁻¹ was selected as the nucleation inhibitor based on the determination of turbidimetry and TEM with selected area electron diffraction (TEM-SAED). The results showed that collagen intrafibrillar mineralization was significantly promoted with the pretreatment of self-assembly ID8 detected by TEM-SAED, SEM, X-ray diffraction and ATR-FTIR. The pretreatment of collagen utilizing self-assembly ID8 not only enhanced intermolecular hydrogen bonding but also contributed to calcium retention inside collagen and significantly increased the hydrophilicity of collagen. These results indicated that peptides with self-assembly properties like ID8 are expected to be potential tools for biomimetic mineralization of collagen.

Insight on the Role of Poly(acrylic acid) for Directing Calcium Phosphate Mineralization of Synthetic Polymer Bone Scaffolds

Bone is a complex tissue with robust mechanical and biological properties originating from its nanoscale composite structure. Although much research has been conducted on designing bioinspired artificial bone, the role of biological macromolecules such as noncollagenous proteins (NCPs) in influencing the formation of biominerals is not fully understood. In this work, we have designed nanofiber shish-kebab (NFSK) structures that can template mineral location by recruiting calcium cations from an ion-rich mineralization solution. Poly(acrylic acid) (PAA) is used as the NCP analogue to understand the role of polyelectrolytes in scaffold mineralization. We demonstrate that the addition of PAA in the mineralization solution suppresses the development of extrafibrillar minerals as well as slows down the accumulation and development of mineral phases within NFSKs. We probe the mechanism behind this effect by monitoring the free calcium ion concentration, investigating the PAA molecular weight effect, and conducting mineralization in membrane-partitioned solutions. Our results suggest the 2-fold effect of PAA as a solution stabilizer and physical barrier on the NFSK surface. This work could shed light on the understanding of the NCP effect in biomineralization.

Biomechanics and mechanobiology of the bone matrix

The bone matrix plays an indispensable role in the human body, and its unique biomechanical and mechanobiological properties have received much attention. The bone matrix has unique mechanical anisotropy and exhibits both strong toughness and high strength. These mechanical properties are closely associated with human life activities and correspond to the function of bone in the human body. None of the mechanical properties exhibited by the bone matrix is independent of its composition and structure. Studies on the biomechanics of the bone matrix can provide a reference for the preparation of more applicable bone substitute implants, bone biomimetic materials and scaffolds for bone tissue repair in humans, as well as for biomimetic applications in other fields. In providing mechanical support to the human body, bone is constantly exposed to mechanical stimuli. Through the study of the mechanobiology of the bone matrix, the response mechanism of the bone matrix to its surrounding mechanical environment can be elucidated and used for the health maintenance of bone tissue and defect regeneration. This paper summarizes the biomechanical properties of the bone matrix and their biological significance, discusses the compositional and structural basis by which the bone matrix is capable of exhibiting these mechanical properties, and studies the effects of mechanical stimuli, especially fluid shear stress, on the components of the bone matrix, cells and their interactions. The problems that occur with regard to the biomechanics and mechanobiology of the bone matrix and the corresponding challenges that may need to be faced in the future are also described.

Remineralization of human dentin type I collagen fibrils induced by carboxylated polyamidoamine dendrimer/amorphous calcium phosphate nanocomposite: an in vitro study

Intrafibrillar mineralization of type I collagen fibrils is of great significance in dental remineralization, which is the key of caries prevention and treatment. Herein, two substances that have the remineralization ability, carboxylated polyamidoamine dendrimer (PAMAM-COOH) and nano-sized amorphous calcium phosphate (n-ACP) were combined to synthesize a novel nanomaterial, carboxylated polyamidoamine dendrimer/amorphous calcium phosphate nanocomposite (PAMAM-COOH/ACP). This article aims to evaluate the remineralization effect of PAMAM-COOH/ACP of dentin type I collagen fibrils in vitro. Fluorescence labeling technique was innovatively used to observe and evaluate the remineralization effect. PAMAM-COOH/ACP showed superior remineralization ability of human dentin type I collagen fibrils, especially the intrafibrillar remineralization. Therefore, the novel nanomaterial PAMAM-COOH/ACP is promising to prevent and treat various diseases caused by dentin demineralization and to improve various dental materials.

Comparison of Synthetic vs. Biogenic Polymeric Process-Directing Agents for Intrafibrillar Mineralization of Collagen

With the aging population, there is a growing need for mineralized tissue restoration and synthetic bone substitutes. Previous studies have shown that a polymer-induced liquid-precursor (PILP) process can successfully mineralize collagen substrates to achieve compositions found in native bone and dentin. This process also leads to intrafibrillar apatitic crystals with their [001] axes aligned roughly parallel to the long axis of the collagen fibril, emulating the nanostructural organization found in native bone and dentin. When demineralized bovine bone was remineralized via the PILP process using osteopontin (OPN), the samples were able to activate mouse marrow-derived osteoclasts to similar levels to those of native bone, suggesting a means for fabricating bioactive bone substitutes that could trigger remodeling through the native bone multicellular unit (BMU). In order to determine if OPN derived from bovine milk could be a cost-effective process-directing agent, the mineralization of type I collagen scaffolds using this protein was compared to the benchmark polypeptide of polyaspartic acid (sodium salt; pAsp). In this set of experiments, we found that OPN led to much faster and more uniform mineralization when compared with pAsp, making it a cheaper and commercially attractive alternative for mineralized tissue restorations.

Orthophosphate and alkaline phosphatase induced the formation of apatite with different multilayered structures and mineralization balance

Mineralized collagen is a natural organic-inorganic composite. The combination of organic collagen and inorganic apatite to form different nanostructures is the key to producing bone substitutes with biomechanical properties that are as identical to normal bone as possible. However, the formation of apatite with different nanostructures during collagen mineralization is unexplored. Here, pyrophosphate (Pyro-P), as an important hydrolysate of adenosine triphosphate in the body, was introduced to prepare mineralized collagen under the regulation of alkaline phosphatase (ALP) and orthophosphate (Ortho-P). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results showed that mineralized collagen, which combined with different crystallinities and multilayered structured apatite, was successfully prepared. A combination of ion chromatography (IC), Fourier transform infrared (FTIR) spectroscopy, circular dichroism (CD), and thermogravimetry (TG) analyses revealed the crucial role of Ortho-P in the formation of multilayered flower-shaped apatite with different crystallinities and in the maintenance of mineralization balance. Mineralization balance is of great significance for maintaining normal bone morphology during bone regeneration. Overall, our results provide a promising method to produce new bone substitute materials for the repair of large bone defects and a deeper insight into the mechanisms of biomineralization.

Effect of a new modified polyamidoamine dendrimer biomimetic system on the mineralization of type I collagen fibrils: an in vitro study

We evaluate the effects of the new Dentine matrix protein 1 (DMP-1) biomimetic system composed of phosphorylated polyamidoamine dendrimer (PAMAM-PO₃H₂) and carboxylated polyamidoamine dendrimer (PAMAM-COOH) on the mineralization of type I collagen fibrils. PAMAM-PO₃H₂ and PAMAM-COOH were observed to have the ability to induce internal and external mineralization of type I collagen fibrils in vitro through non-classical mineralization crystallization pathway, which has become a hopeful biomimetic system of biomimetic remineralization and demineralization of dentin type I collagen fibrils and has great potential in inducing biomimetic remineralization of demineralized dentin.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration

Biomineralization is a process in which natural organisms regulate the crystal growth of inorganic minerals, resulting in hierarchical structured biominerals with excellent properties. Typical biominerals in the human body are the bones and teeth, and damage to these hard tissues directly affect our daily lives. The repair of bones and teeth in a biomimetic way, either by using a biomimetic mineralization strategy or biomimetic materials, is the key for hard tissue regeneration. In this review, we briefly introduce the structure of bone and tooth, and highlight the fundamental role of collagen mineralization in tissue repair. The recent progress on intra-/extrafibrillar collagen mineralization by a biomimetic strategy or materials is presented, and their potential for tissue regeneration is discussed. Then, recent achievements on bone and tooth repair are summarized, and these works are discussed in the view of materials science and biological science, providing a broader vision for the future research of hard tissue repair techniques. Lastly, recent progress on hard tissue regeneration is concluded, and existing problems and future directions are prospected.

Spatial-Temporal Patterns and Inflammatory Factors of Bone Matrix Remodeling

The bone extracellular matrix (ECM) contains organic and mineral constituents. The establishment and degradation processes of ECM connect with spatial and temporal patterns, especially circadian rhythms in ECM. These patterns are responsible for the physical and biological characteristics of bone. The disturbances of the patterns disrupt bone matrix remodeling and cause diverse bone diseases, such as osteogenesis imperfecta (OI) and bone fracture. In addition, the main regulatory factors and inflammatory factors also follow circadian rhythms. Studies show that the circadian oscillations of these factors in bone ECM potentially influence the interactions between immune responses and bone formation. More importantly, mesenchymal stem cells (MSCs) within the specific microenvironments provide the regenerative potential for tissue remodeling. In this review, we summarize the advanced ECM spatial characteristics and the periodic patterns of bone ECM. Importantly, we focus on the intrinsic connections between the immunoinflammatory system and bone formation according to circadian rhythms of regulatory factors in bone ECM. And our research group emphasizes the multipotency of MSCs with their microenvironments. The advanced understandings of bone ECM formation patterns and MSCs contribute to providing optimal prevention and treatment strategies.

Synthesis and Assembly of Recombinant Collagen

Collagen represents the major structural protein of the extracellular matrix. The desired mechanical and biological performances of collagen that have led to its broad applications as a building block in a great deal of fields, such as tissue engineering, drug delivery, and nanodevices. The most direct way to obtain collagen is to separate and extract it from biological tissues, but these top-down methods are usually cumbersome, and the structure of collagen is usually destroyed during the preparation process. Moreover, there is currently no effective method to separate some scarce collagens (such as collagen from human beings). Alternatively, bottom-up assembly methods have been developed to obtain collagen assembly or their analogs. The collagen used in this type of method is usually obtained by genetic recombination. A distinct advantage of gene recombination is that the sequence structure of collagen can be directly customized, so its assembly mode can be regulated at the primary structure level, and then a collagen assembly with a predesigned configuration can be achieved. Additionally, insights into the assembly behavior of these specific structures provide a rational approach to understand the pathogenic mechanisms of collagen-associated diseases, such as diabetes. In this chapter, Type I collagen is used as an example to introduce the key methods and procedures of collagen recombination, and on this basis, we will introduce in detail the experimental protocols for further assembly of these recombinant proteins to specific structures, such as fibril.

Research advances in the fabrication of biosafety and functional leather: A way-forward for effective management of COVID-19 outbreak

With the recent events following the pandemic COVID-19, global awareness about the use of biosafety materials has been in raise. Leather industry being a major commodity-driven sector, its role in addressing the issues concerning the safe use of leather products has become inevitable for the sustainability of the industry. A significant number of researches have been conducted to fabricate bio-safe leather by incorporating different types of antimicrobial agents during leather manufacturing. Besides, the increasing diversity in the development of synthetic materials and the impact of COVID-19 outbreak on automotive industry may create more demand from customers for incorporating different functionalities in leather without losing its inherent properties. Some of the key functionalities discussed include resistance to microbial growth, self-cleaning through superhydrophobicity and photocatalysis, thermal regulation, flame retardance and scented leather. This review focusses on the fabrication of such advanced functional leather materials over the past decade with special emphasis on antimicrobial leather. Some of the key factors elaborated in the review include the state of art approaches for the preparation of functional materials, mode of incorporation of the same into the leather matrix, the mechanism behind with a perspective on the challenges involved in fabrication for real-world applications. A major outcome of this review is that even though several kinds of cutting edge researches are happening in the field of leather manufacturing, most of them were not validated for its practical applicability and sustainability of the proposed solution. This could be majorly attributed to the cost involved in fabrication of such materials, which forms a crucial factor when it comes to a mass production industry such as leather. Also, the researchers should concentrate on the toxicity of the fabricated materials which can impede the process of adopting such emerging and need of the hour technologies in the near future. Knowledge obtained from this review on fabrication of bio-safety leather against bacteria, mold and fungi would help further to integrate the antiviral property into the same which is a global need. Also, fabrication of functionalized leather would open new avenues for leather manufactures to venture into the development of advanced leather products such as flexible electronics, radiation shielding and fire fighting garments etc.

Polyaminoacids in Biomimetic Collagen Mineralization: Roles of Isomerization and Disorder in Polyaspartic and Polyglutamic Acids

The extracellular matrix of hard connective tissues is composed primarily of mineralized collagen fibrils. Acidic noncollagenous proteins play important roles in mediating mineralization of collagen. Polyaspartate, a homopolymer substitute for such proteins, has been used extensively in in vitro models to produce biomimetic mineralized collagen. Polyglutamate behaves differently in mineralization models, despite its chemical similarity. We show that polyaspartate is a 350 times more effective inhibitor of solution precipitation of hydroxyapatite than polyglutamate. Supersaturated CaP solutions stabilized with polyaspartic acid produce collagen with aligned intrafibrillar mineral, while solutions containing polyglutamate lead to the formation of unaligned mineral clusters on the fibril surface. Molecular analysis showed that the commercial polyaspartic acid contains substantial isomerization, unlike polyglutamic acid. Hence, the secondary structure of polyaspartic acid is more disordered than that of polyglutamic acid. The increased flexibility of the polyaspartic acid chain may explain its potency as an inhibitor of solution crystallization and a mediator of intrafibrillar collagen mineralization.

Bioinspired mineralized collagen scaffolds for bone tissue engineering

Successful regeneration of large segmental bone defects remains a major challenge in clinical orthopedics, thus it is of important significance to fabricate a suitable alternative material to stimulate bone regeneration. Due to their excellent biocompatibility, sufficient mechanical strength, and similar structure and composition of natural bone, the mineralized collagen scaffolds (MCSs) have been increasingly used as bone substitutes via tissue engineering approaches. Herein, we thoroughly summarize the state of the art of MCSs as tissue-engineered scaffolds for acceleration of bone repair, including their fabrication methods, critical factors for osteogenesis regulation, current opportunities and challenges in the future. First, the current fabrication methods for MCSs, mainly including direct mineral composite, in-situ mineralization and 3D printing techniques, have been proposed to improve their biomimetic physical structures in this review. Meanwhile, three aspects of physical (mechanics and morphology), biological (cells and growth factors) and chemical (composition and cross-linking) cues are described as the critical factors for regulating the osteogenic feature of MCSs. Finally, the opportunities and challenges associated with MCSs as bone tissue-engineered scaffolds are also discussed to point out the future directions for building the next generation of MCSs that should be endowed with satisfactorily mimetic structures and appropriately biological characters for bone regeneration.

In Vitro Mineralization of Collagen

Collagen mineralization is a biological process in many skeletal elements in the animal kingdom. Examples of these collagen-based skeletons are the siliceous spicules of glass sponges or the intrafibrillar hydroxyapatite platelets in vertebrates. The mineralization of collagen in vitro has gained interest for two reasons: understanding the processes behind bone formation and the synthesis of scaffolds for tissue engineering. In this paper, the efforts toward collagen mineralization in vitro are reviewed. First, general introduction toward collagen type I, the main component of the extracellular matrix in animals, is provided, followed by a brief overview of collagenous skeletons. Then, the in vitro mineralization of collagen is critically reviewed. Due to their biological abundance, hydroxyapatite and silica are the focus of this review. To a much lesser extent, also some efforts with other minerals are outlined. Combining all minerals and the suggested mechanisms for each mineral, a general mechanism for the intrafibrillar mineralization of collagen is proposed. This review concludes with an outlook for further improvement of collagen-based tissue engineering scaffolds.

Highly aligned hierarchical intrafibrillar mineralization of collagen induced by periodic fluid shear stress

Periodic fluid shear stress (FSS) is one of the main mechanical microenvironments in mineralization of bone matrix. To elucidate the mechanism of periodic FSS in collagen mineralization, a mechanical loading induced mineralization system is developed and compared with traditional polyacrylic acid (PAA) induced mineralization. Fourier transform infrared (FTIR) spectroscopy, calcium-to-phosphorus molar ratio and transmission electron microscopy (TEM) demonstrate that both periodic FSS and PAA can control the size of amorphous calcium phosphate (ACP) to avoid aggregation and help the formation of intrafibrillar mineralization. Differently, periodic FSS under a proper cycle and range can accelerate the conversion of ACP to apatite crystals and alleviate the reduced transformation caused by PAA. Under the action of template analogues, periodic FSS can also promote the formation of highly oriented hierarchical intrafibrillar mineralized (HIM) collagen. These findings are helpful for understanding the mechanism of collagen mineralization in natural bone matrix and contribute to the design of novel bone substitute materials with hierarchical structures.

Use of phosphorylated PAMAM and carboxyled PAMAM to induce dentin biomimetic remineralization and dentinal tubule occlusion

It is crucial to emphasize the biomineralization therapeutic method to repair etched dentin in clinic. Non-collagenous proteins (NCPs) play critical role in the biomineralization of dentine. In this paper, we synthesized the phosphate-terminated polyamidoamine dendrimer (PAMAM-PO₃H₂) by one-step modification successfully and examined by Fourier-transform infrared spectroscopy (FTIR) and ¹H-nuclear Magnetic Resonance (¹H-NMR) to characterize the structure of PAMAM-PO₃H₂. PAMAM-PO₃H₂ and carboxylterminated dendrimers (PAMAM-COOH) were applied as the dual biomimetic analogs of NCPs. Through the characterization of FT-IR, field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), the surfaces of human dentin were covered with regenerated crystals and the dentinal tubules were occluded by PAMAM-PO₃H₂ and PAMAM-COOH. In summary, the combination of PAMAM-PO₃H₂ and PAMAM-COOH may be another feasible therapeutic method for the treatment of dentin caries and dentin hypersensitivity.

Polyelectrolyte-calcium complexes as a pre-precursor induce biomimetic mineralization of collagen

Polyelectrolytes such as polyaspartic acid (PAsp) are critical in biomimetic mineralization as stabilizers of amorphous calcium phosphate (ACP) precursors and as nucleation inhibitors similar to non-collagenous proteins (NCPs). Nevertheless, the application of polyelectrolyte-calcium complexes as a pre-precursor, such as PAsp-Ca complexes, in the mineralization of collagen is unexplored. Herein, we propose a polyelectrolyte-Ca complex pre-precursor (PCCP) process for collagen mineralization. By combining three-dimensional (3D) STORM, potential measurements, and cryogenic transmission electron microscopy with molecular dynamics simulations, we show that liquid-like electropositive PAsp-Ca complexes along with free calcium ions infiltrate electronegative collagen fibrils. The PAsp-Ca complexes are immobilized within the fibrils via chelation and hydrogen bonds, and outward movement of free calcium ions is prevented while phosphate and hydroxide are recruited through electrostatic attractions. Afterwards, ACP instantly forms and gradually crystallizes. The PCCP process not only unites two distinct crystallization pathways (classical (free Ca/P ions) and non-classical (polyelectrolyte-Ca complexes)), but also provides a novel strategy for rapid biomimetic mineralization of collagen.

Remineralising effects of fluoride varnishes containing calcium phosphate on artificial root caries lesions with adjunctive application of proanthocyanidin

OBJECTIVES

To evaluate the remineralising effects of fluoride (F) varnishes containing bioavailable calcium-phosphate compound (Ca-P) based remineralisation systems and 5000 ppm F toothpaste (FTP) on root caries lesions (RCLs) and the potential effects of proanthocyanidin (PA) for the treatments of RCLs when used as an adjunct to F regimens.

METHODS

Demineralised root dentine and a pH-cycling model were used to mimic RCLs and the oral environment. Remineralising effects of MI Varnish^TM (MIV) containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and Clinpro™ White Varnish (CPWV) containing tri-calcium phosphate (TCP) along with FTP and PA were evaluated regarding the birefringence, elemental composition, mechanical properties and mineral density of remineralised dentine with Duraphat^TM as a comparison.

RESULTS

MIV, CPWV and Duraphat^TM promoted the incorporation of F into RCLs and increased mineral density but did not change microhardness of root dentine significantly. Surface microhardness increased significantly when MIV or CPWV was used with 5000 ppm FTP. Application of PA with F regimens significantly increased subsurface mineral density. When PA was applied with MIV or CPWV along with FTP, the highest ion uptake and relative mineral gain (%ΔZ) was achieved, and significant increase of microhardness was up to 30 μm depth. Generally, MIV was associated with a higher mineral content gain than CPWV.

SIGNIFICANCE

Treatment of carious root surfaces remains challenging due to the complex pathological processes and difficulty in restoring the highly organised structure of root dentine. Treatment strategies targeting both remineralisation and preservation of the dentinal organic matrix have the potential to improve the fluoride-mediated remineralisation approaches.

Contemporary restorative ion-releasing materials: current status, interfacial properties and operative approaches

Minimally invasive (MI) concepts in restorative dentistry in the year 2020 request from the practitioner not only a scientifically supported rationale for carious tissue removal/excavation and defect-oriented, biological cavity preparation, but also a deep understanding of how to ensure a biomechanically stable and durable restoration in different clinical situations by applying different restorative options. Bio-interactive materials play an increasingly relevant role, as they not only replace diseased or lost tissue, but also optimise tissue mineral recovery (among other properties) when used in restorative and preventive dentistry. Indeed, this is of certain interest in MI restorative dentistry, especially in those cases where gap formation jeopardises the integrity of the margins along resin composite restorations, causing penetration of bacteria and eventually promoting the formation of secondary caries. Recently, the interest in whether ion-releasing materials may reduce such biofilm penetration into margin gaps and reduce such a risk for development and propagation of secondary caries is growing significantly among clinicians and scientists. The aim of this article was to explore mechanisms involved in the process that allow mineral deposition at the interface between such materials and dentine, and to describe how conventional 'bioactive' restorative materials currently available on the market may benefit treatments in MI dentistry.

Intermolecular channels direct crystal orientation in mineralized collagen

The mineralized collagen fibril is the basic building block of bone, and is commonly pictured as a parallel array of ultrathin carbonated hydroxyapatite (HAp) platelets distributed throughout the collagen. This orientation is often attributed to an epitaxial relationship between the HAp and collagen molecules inside 2D voids within the fibril. Although recent studies have questioned this model, the structural relationship between the collagen matrix and HAp, and the mechanisms by which collagen directs mineralization remain unclear. Here, we use XRD to reveal that the voids in the collagen are in fact cylindrical pores with diameters of ~2 nm, while electron microscopy shows that the HAp crystals in bone are only uniaxially oriented with respect to the collagen. From in vitro mineralization studies with HAp, CaCO₃ and γ-FeOOH we conclude that confinement within these pores, together with the anisotropic growth of HAp, dictates the orientation of HAp crystals within the collagen fibril.

Peptide-assisted pre-bonding remineralization of dentin to improve bonding

Bonding with dentin is a complex process involving physical and chemical adhesion where the adhesive must be able to penetrate and envelop collagen fibers. Acid etching clears the dentin of debris, which prevents adhesives to interact with dentin. However, it also demineralizes the outermost surface of dentin and exposes collagen fibers. The mineral-free collagen is susceptible to collapse after drying and to proteolytic or microbial attack, ultimately impairing the bonding with dentin. To address this, we have attempted a pre-bonding rapid remineralization approach to recover the mineral content of etched dentin. We have used a mineralization-promoting peptide and high calcium/phosphate concentration to achieve this in a clinically applicable timeframe. Partial remineralization was confirmed via SEM and XRD analyses. The mechanical properties and the stability of the partially remineralized dentin were investigated via microhardness, collagen hydrolysis and shrinkage tests. The bonding properties were investigated via shear bond strength (SBS) and microleakage tests. Pre-bonding remineralization of dentin with peptide for 10 min significantly increased the stiffness, resistance to hydrolysis and reduced shrinkage due to drying. SBS was increased with both an etch&rinse and a self-etch adhesive. However, pre-bonding remineralization resulted in reduced microleakage only with the etch&rinse adhesive. The described method is readily applicable to clinic since it is expected to add only 10 min to the procedure. Future in situ and/or in vivo studies will help to confirm the benefits observed in this in vitro study and allow optimize the parameters of the method.

Alternate soaking enables easy control of mineralized collagen scaffold mechanics from nano- to macro-scale

The mechanical properties of biologic scaffolds are critical to cellular interactions and hence functional response within the body. In the case of scaffolds for bone tissue regeneration, engineered scaffolds created by combining collagen with inorganic mineral are increasingly being explored, due to their favourable structural and chemical characteristics. Development of a method for controlling the mechanics of these scaffolds could lead to significant additional advantages by harnessing the intrinsic mechnotransduction pathways of stem cells via appropriate control of scaffold mechanical properties. Here we present a method for controlling the macroscale flexural modulus of mineralized collagen sheets, and the radial indentation modulus of the sheets' constituent collagen fibrils. Scaffolds were created starting with sheets of highly aligned, natively structured collagen fibrils, prepared via cryosectioning of decellularized tendon. Sheets underwent an alternate soaking mineralization procedure, with sequential exposure to citrate-doped calcium and carbonate-containing phosphate solutions, both of which included poly aspartic acid. The extent of scaffold mineralization was controlled via number of repeated mineralization cycles: 0 (unmineralized), 5, 10, and 20 cycles were trialed. Following scaffold preparation, ultrastructure, macroscale flexural modulus, and nanoscale indentation modulus were assessed. Surface architecture studied by SEM, and inspection of individual extracted fibrils by TEM and AFM confirmed that fibrils became increasingly laden with mineral as the number of mineralization cycles increased. Measurements of collagen fibril nanomechanics using AFM showed that the radial modulus of collagen fibrils increased linearly with mineralization cycles completed, from 215 ± 125 MPa for fibrils from unmineralized (0 cycle) scaffolds to 778 ± 302 MPa for fibrils from the 20 mineralization cycle scaffolds. Measurements of scaffold macromechanics via flexural testing also showed a linear increase in flexural modulus with increasing number of mineralization cycles completed, from 18 ± 7 MPa for the 5 cycle scaffolds to 156 ± 50 MPa for the 20 cycle scaffolds. The process detailed herein provides a way to create mineralized collagen scaffolds with easily controllable mechanical properties.

The role of organic phosphate in the spatial control of periodontium complex bio-mineralization: an in vitro study

The periodontal structure is a particularly exquisite model of hierarchical spatial control of mineralization. Extracellular matrix control in the selective mineralization of the periodontium complex remains elusive since the extracellular matrix is a set of mineralization promoters and inhibitors. The phosphorylated proteins, which are ubiquitous in the extracellular matrix of the periodontium complex, are well-documented as primary factors in the regulation of tissue mineralization. Whether organic phosphates are key regulators in defining the interfaces between dentin, cementum, periodontal ligament and alveolar bone is an issue worthy of research. Here, we investigated the in vitro remineralization process of demineralized and dephosphorylated periodontal tissue sections. When exposed to a metastable mineralization solution, a large number of calcospherulites deposited on the surface of the dephosphorylated sections and the tissue selective mineralization were disrupted. Interestingly, on adding a dentin matrix protein-1 analogue named polyacrylic acid, the surface mineralization rate in the dephosphorylated periodontal complex reduced dramatically. In contrast, hierarchical mineralization was displayed by the demineralized section at the tissue collagen fibrillar levels in both alveolar bone and dentin regions. These results demonstrated that the organic phosphate could prevent surface mineral deposition, and the minerals could penetrate the collagen fibrils to initiate a selective and hierarchal tissue mineralization with the assistance of the dentin matrix protein-1 analogue in the periodontal complex. This study enhances our understanding of the mineralization discrepancy in the periodontal tissues, which will provide some insight into the development of biomaterials for the regeneration of soft-hard tissue interfaces.

Intrafibrillar Mineralized Collagen-Hydroxyapatite-Based Scaffolds for Bone Regeneration

As one of the major challenges in the field of tissue engineering, large skeletal defects have attracted wide attention from researchers. Collagen (Col) and hydroxyapatite (HA), the most abundant protein and the main component in natural bone, respectively, are usually used as a biomimetic composite material in tissue engineering due to their excellent biocompatibility and biodegradability. In this study, novel intrafibrillar mineralized Col-HA-based scaffolds, constructed in either cellular or lamellar microstructures, were established through a biomimetic method to enhance the new bone-regenerating capability of tissue engineering scaffolds. Moreover, iron (Fe) and manganese (Mn), two of the essential trace elements in the body, were successfully incorporated into the lamellar scaffold to further improve the osteoinductivity of these biomaterials. It was found that the lamellar scaffolds demonstrated better osteogenic abilities compared to both in-house and commercial Col-HA-based cellular scaffolds in vitro and in vivo. Meanwhile, Fe/Mn incorporation further amplified the osteogenic promotion of the lamellar scaffolds. More importantly, a synergistic effect was observed in the Fe and Mn dual-element-incorporated lamellar scaffolds for both in vitro osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and in vivo bone regeneration loaded with fresh bone marrow cells. This study provides a simple but practical strategy for the creation of functional scaffolds for bone regeneration.

Bioenergetic-active materials enhance tissue regeneration by modulating cellular metabolic state

Cellular bioenergetics (CBE) plays a critical role in tissue regeneration. Physiologically, an enhanced metabolic state facilitates anabolic biosynthesis and mitosis to accelerate regeneration. However, the development of approaches to reprogram CBE, toward the treatment of substantial tissue injuries, has been limited thus far. Here, we show that induced repair in a rabbit model of weight-bearing bone defects is greatly enhanced using a bioenergetic-active material (BAM) scaffold compared to commercialized poly(lactic acid) and calcium phosphate ceramic scaffolds. This material was composed of energy-active units that can be released in a sustained degradation-mediated fashion once implanted. By establishing an intramitochondrial metabolic bypass, the internalized energy-active units significantly elevate mitochondrial membrane potential (ΔΨm) to supply increased bioenergetic levels and accelerate bone formation. The ready-to-use material developed here represents a highly efficient and easy-to-implement therapeutic approach toward tissue regeneration, with promise for bench-to-bedside translation.

Enhancing Collagen Mineralization with Amelogenin Peptide: Towards the Restoration of Dentin

Mammalian teeth primarily consist of two distinct calcified tissues, enamel and dentin, that are intricately integrated by a complex and critical structure, the dentin-enamel junction (DEJ). Loss of enamel exposes the underlying dentin, increasing the risk of several irreversible dental diseases. This paper highlights the significance of utilizing the functional domains of a major enamel matrix protein, amelogenin, intrinsic to tooth enamel and the DEJ interface, to rationally design smaller bioinspired peptides for regeneration of tooth microstructures. Using this strategy, we designed a synthetic peptide, P26, that demonstrates a remarkable dual mineralization potential to restore incipient enamel decay and mineralization defects localized in peripheral dentin below the DEJ. As a proof of principle, we demonstrate that interaction between P26 and collagen prompts peptide self-assembly, followed by mineralization of collagen fibrils in vitro. P26-mediated nucleation of hydroxyapatite (HAP) crystals on demineralized dentin in situ significantly facilitates the recovery of mineral density and effectively restores the biomechanical properties of dentin to near-native levels, suggesting that P26-based therapy has promising applications for treating diverse mineralized tissue defects in the tooth.

Promotion effect of immobilized chondroitin sulfate on intrafibrillar mineralization of collagen

Chondroitin sulfate (CS) is widespread in mineralized tissues and is considered to play crucial roles during the mineralization process. However, its role in biomineralization remains controversial. In the present study, CS is immobilized to collagen fibrils to mimic its state in biomineralization. The results demonstrate that immobilized CS on collagen fibrils accelerates calcium phosphate nucleation and significantly promotes collagen mineralization by accumulating calcium ions in collagen fibrils. The stochastic optical reconstruction microscopy results confirm that CS gives the specific nucleation sites for calcium phosphate to preferentially form, the improved intrafibrillar heterogeneous nucleation of calcium phosphate facilitates intrafibrillar mineralization. It is found remarkably accelerated remineralization of CS immobilized demineralized dentin is achieved. This study offers insight on the understanding of the function of the biomacromolecule CS on the biomineralization front. In addition, CS effectively promotes intrafibrillar mineralization, which highlights fine prospect for CS to reconstruct collagen-mineralized tissues as a natural material.

Dual Function of Magnesium in Bone Biomineralization

Magnesium (Mg²⁺ ), as a main component of bone, is widely applied to promote bone growth and regeneration. However, Mg²⁺ can chemically inhibit the crystallization of amorphous calcium phosphate into hydroxyapatite (HA). The underlying mechanisms by which Mg²⁺ improves bone biomineralization remain elusive. Here, it is demonstrated that Mg²⁺ plays dual roles in bone biomineralization from a developmental perspective. During embryonic development, the Mg²⁺ concentration is enriched in the early stage from embryonic day 13.5 (E13.5) to E15.5, but gradually decreases to a stable state in the late phase, after E15.5. Appropriate concentrations of Mg²⁺ can promote the mineralization of bone marrow mesenchymal stem cells, while excessive Mg²⁺ impairs their osteogenesis. The earlier the Mg²⁺ is added, the stronger the observed inhibition of mineralization. In particular, less Mg²⁺ is present in fully mineralized collagen than in poorly mineralized collagen. Furthermore, a high concentration of Mg²⁺ changes the crystalline morphology of HA and inhibits collagen calcification. Functionally, a high-Mg²⁺ diet inhibits bone biomineralization in mouse offspring. Taken together, the results suggest that appropriate regulation of Mg²⁺ concentration over time is vital for normal biomineralization. This study is significant for the future design of bone substitutes and implants associated with Mg²⁺ content.

Modulation of biomimetic mineralization of collagen by soluble ectodomain of discoidin domain receptor 2

Collagen fibrils serve as the major template for mineral deposits in both biologically derived and engineered tissues. In recent years certain non-collagenous proteins have been elucidated as important players in differentially modulating intra vs. extra-fibrillar mineralization of collagen. We and others have previously shown that the expression of the collagen receptor, discoidin domain receptor 2 (DDR2) positively correlates with matrix mineralization. The objective of this study was to examine if the ectodomain (ECD) of DDR2 modulates intra versus extra-fibrillar mineralization of collagen independent of cell-signaling. For this purpose, a decellularized collagenous substrate, namely glutaraldehyde fixed porcine pericardium (GFPP) was subjected to biomimetic mineralization protocols. GFPP was incubated in modified simulated body fluid (mSBF) or polymer-induced liquid precursor (PILP) solutions in the presence of recombinant DDR2 ECD (DDR2-Fc) to mediate extra or intra-fibrillar mineralization of collagen. Thermogravimetric analysis revealed that DDR2-Fc increased mineral content in GFPP calcified in mSBF while no significant differences were observed in PILP mediated mineralization. Electron microscopy approaches were used to evaluate the quality and quantity mineral deposits. An increase in the matrix to mineral ratio, frequency of particles and size of mineral deposits was observed in the presence of DDR2-Fc in mSBF. Von Kossa staining and immunohistochemistry analysis of adjacent sections indicated that DDR2-Fc bound to both the matrix and mineral phase of GFPP. Further, DDR2-Fc was found to bind to hydroxyapatite (HAP) particles and enhance the nucleation of mineral deposits in mSBF solutions independent of collagen. Taken together, our results elucidate DDR2 ECD as a novel player in the modulation of extra-fibrillar mineralization of collagen.

The influence of osteopontin-guided collagen intrafibrillar mineralization on pericyte differentiation and vascularization of engineered bone scaffolds

Biomimetically mineralized collagen scaffolds are promising for bone regeneration, but vascularization of these materials remains to be addressed. Here, we engineered mineralized scaffolds using an osteopontin-guided polymer-induced liquid-precursor mineralization method to recapitulate bone's mineralized nanostructure. SEM images of mineralized samples confirmed the presence of collagen with intrafibrillar mineral, also EDS spectra and FTIR showed high peaks of calcium and phosphate, with a similar mineral/matrix ratio to native bone. Mineralization increased collagen compressive modulus up to 15-fold. To evaluate vasculature formation and pericyte-like differentiation, HUVECs and hMSCs were seeded in a 4:1 ratio in the scaffolds for 7 days. Moreover, we used RT-PCR to investigate the gene expression of pericyte markers ACTA2, desmin, CD13, NG2, and PDGFRβ. Confocal images showed that both nonmineralized and mineralized scaffolds enabled endothelial capillary network formation. However, vessels in the nonmineralized samples had longer vessel length, a larger number of junctions, and a higher presence of αSMA+ mural cells. RT-PCR analysis confirmed the downregulation of pericytic markers in mineralized samples. In conclusion, although both scaffolds enabled endothelial capillary network formation, mineralized scaffolds presented less pericyte-supported vessels. These observations suggest that specific scaffold characteristics may be required for efficient scaffold vascularization in future bone tissue engineering strategies. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1522-1532, 2019.

A Biomimetic Hierarchical Nanointerface Orchestrates Macrophage Polarization and Mesenchymal Stem Cell Recruitment To Promote Endogenous Bone Regeneration

The host immune response to bone biomaterials is vital in determining scaffold fates and bone regeneration outcomes. The nanometer-scale interface of biomaterials, which independently controls physical inputs to cells, regulates osteogenic differentiation of stem cells and local immune response. Herein, we fabricated biomimetic hierarchical intrafibrillarly mineralized collagen (HIMC) with a bone-like staggered nanointerface and investigated its immunomodulatory properties and mesenchymal stem cell (MSC) recruitment during endogenous bone regeneration. The acquired HIMC potently induced neo-bone formation by promoting CD68⁺CD163⁺ M2 macrophage polarization and CD146⁺STRO-1⁺ host MSC recruitment in critical-sized bone defects. Mechanistically, HIMC facilitated M2 macrophage polarization and interleukin (IL)-4 secretion to promote MSC osteogenic differentiation. An anti-IL4 neutralizing antibody significantly reduced M2 macrophage-mediated osteogenic differentiation of MSCs. Moreover, HIMC-loaded-IL-4 implantation into critical-sized mandible defects dramatically enhanced bone regeneration and CD68⁺CD163⁺ M2 macrophage polarization. The depletion of monocyte/macrophages by clodronate liposomes significantly impaired bone regeneration by HIMC, but did not affect MSC recruitment. Thus, in emulating natural design, the hierarchical nanointerface possesses the capacity to recruit host MSCs and promote endogenous bone regeneration by immunomodulation of macrophage polarization through IL-4.

Apatite minerals derived from collagen phosphorylation modification induce the hierarchical intrafibrillar mineralization of collagen fibers

Collagen is the critical organic component of bone matrix, which is the template for bone biomineralization. Phosphorylation modification of collagen plays an important role in the process of biomineralization in vivo, but its mechanism on in vitro biomimetic mineralization of bone matrix remains unclear at the molecular level. Sodium tripolyphosphate is used to phosphorylate collagen in this study and new phosphate groups appear on collagen fibrils after phosphorylation modification. The chelating amount of calcium is improved linearly with increasing the phosphorylation degree of collagen fibrils, which demonstrates that the introduced phosphate groups serve as new nucleation sites and participate in the formation of apatite minerals inside the collagen fibers. Stabilized nanosized amorphous calcium phosphate by polyacrylic acid can also permeate into collagen fibers and further transform into another layer of hydroxyapatite minerals. Both layers of apatite minerals eventually induce the formation of hierarchical intrafibrillar mineralization structure within the phosphorylated collagen fibers. The present research enriches the previous biomineralization mechanism of bone matrix, provides a facile strategy for biomimetic mineralization of collagen, and offers the basis for future investigation of the advanced bone substitute materials.

Remineralization of demineralized dentin using a dual analog system

OBJECTIVE

Improved methods are needed to remineralize dentin caries in order to promote conservation of dentin tissue and minimize the surgical interventions that are currently required for clinical treatment. Here, we test the hypothesis that bulk substrates can be effectively mineralized via a dual analog system proposed by others, using a tripolyphosphate (TPP) "templating analog" and a poly(acrylic acid) (PAA) or poly(aspartic acid) (pAsp) "sequestration analog," the latter of which generates the polymer-induced liquid-precursor (PILP) mineralization process studied in our laboratory.

MATERIAL & METHODS

Demineralized human dentin slices were remineralized with and without pre-treatment with TPP, using either PAA or pAsp as the PILP process-directing agent. A control experiment with no polymer present was used for comparison.

RESULTS

No mineralization was observed in any of the PAA groups. In both the pAsp and no polymer groups, TPP inhibited mineralization on the surfaces of the specimens but promoted mineralization within the interiors. Pre-treatment with TPP enhanced overall mineralization of the pAsp group. However, when analysed via TEM, regions with little mineral were still present.

CONCLUSION

Poly(acrylic acid) was unable to remineralize demineralized dentin slices under the conditions employed, even when pre-treated with TPP. However, pre-treatment with TPP enhanced overall mineralization of specimens that were PILP-remineralized using pAsp.

Organization of Bone Mineral: The Role of Mineral–Water Interactions

The mechanism (s) that drive the organization of bone mineral throughout the bone extracellular matrix remain unclear. The long-standing theory implicates the organic matrix, namely specific non-collagenous proteins and/or collagen fibrils, while a recent theory proposes a self-assembly mechanism. Applying a combination of spectroscopic and microscopic techniques in wet and dry conditions to bone-like hydroxyapatite nanoparticles that were used as a proxy for bone mineral, we confirm that mature bone mineral particles have the capacity to self-assemble into organized structures. A large quantity of water is present at the surface of bone mineral due to the presence of a hydrophilic, amorphous surface layer that coats bone mineral nanoparticles. These water molecules must not only be strongly bound to the surface of bone mineral in the form of a rigid hydration shell, but they must also be trapped within the amorphous surface layer. Cohesive forces between these water molecules present at the mineral–mineral interface not only hold the mature bone mineral particles together, but also promote their oriented stacking. This intrinsic ability of mature bone mineral particles to organize themselves without recourse to the organic matrix forms the foundation for the development of the next generation of orthopedic biomaterials.