In situ sequestration of endogenous PDGF-BB with an ECM-mimetic sponge for accelerated wound healing

Chitosan microflower-embedded gelatin sponges for advanced wound management and hemostatic applications

The study explored the antimicrobial, antibiofilm, and hemostatic properties of chitosan microflowers (CMF) in sponge form. The main objective was to enhance the preparation of CMF by employing varying quantities of calcium chloride (CaCl2) and tripolyphosphate (TPP). CMF was then combined with gelatin (GE) in different proportions to produce three sponge samples: CMF0@GE, CMF1@GE, and CMF2@GE. The CMF had a morphology like that of a flower and produced surfaces with a porous sponge-like structure. The antibacterial activity, as determined by the zone of inhibition (ZOI), increased with greater doses of CMF. Among the tested samples, CMF2@GE had the greatest activity against Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus aureus, and Enterococcus faecium. CMF2@GE successfully suppressed biofilm formation, decreased clotting time to an average of 212.67 s, and exhibited excellent biocompatibility by preserving over 90 % viability of human skin fibroblast cells at dosages below 100 μg/mL. The results indicated that gelatin sponges filled with CMF have considerable promise as flexible medical instruments for wound healing and infection control.

Electrospinning/3D printing drug-loaded antibacterial polycaprolactone nanofiber/sodium alginate-gelatin hydrogel bilayer scaffold for skin wound repair

Skin injuries and defects, as a common clinical issue, still cannot be perfectly repaired at present, particularly large-scale and infected skin defects. Therefore, in this work, a drug-loaded bilayer skin scaffold was developed for repairing full-thickness skin defects. Briefly, amoxicillin (AMX) was loaded on polycaprolactone (PCL) nanofiber via electrospinning to form the antibacterial nanofiber membrane (PCL-AMX) as the outer layer of scaffold to mimic epidermis. To maintain wound wettability and promote wound healing, external human epidermal growth factor (rhEGF) was loaded in sodium alginate-gelatin to form the hydrogel structure (SG-rhEGF) via 3D printing as inner layer of scaffold to mimic dermis. AMX and rhEGF were successfully loaded into the scaffold. The scaffold exhibited excellent physicochemical properties, with elongation at break and tensile modulus were 102.09 ± 6.74% and 206.83 ± 32.10 kPa, respectively; the outer layer was hydrophobic (WCA was 112.09 ± 4.67°), while the inner layer was hydrophilic (WCA was 48.87 ± 5.52°). Meanwhile, the scaffold showed excellent drug release and antibacterial characteristics. In vitro and in vivo studies indicated that the fabricated scaffold could enhance cell adhesion and proliferation, and promote skin wound healing, with favorable biocompatibility and great potential for skin regeneration and clinical application.

Extracellular Matrix-Mimetic Intrinsic Versatile Coating Derived from Marine Adhesive Protein Promotes Diabetic Wound Healing through Regulating the Microenvironment

The management of diabetic wound healing remains a severe clinical challenge due to the complicated wound microenvironments, including abnormal immune regulation, excessive reactive oxygen species (ROS), and repeated bacterial infections. Herein, we report an extracellular matrix (ECM)-mimetic coating derived from scallop byssal protein (Sbp9Δ), which can be assembled in situ within 30 min under the trigger of Ca2+ driven by strong coordination interaction. The biocompatible Sbp9Δ coating and genetically programmable LL37-fused coating exhibit outstanding antioxidant, antibacterial, and immune regulatory properties in vitro. Proof-of-concept applications demonstrate that the coating can reliably promote wound healing in animal models, including diabetic mice and rabbits, ex vivo human skins, and Staphylococcus aureus-infected diabetic mice. In-depth mechanism investigation indicates that improved wound microenvironments accelerated wound repair, including alleviated bacterial infection, lessened inflammation, appearance of abundant M2-type macrophages, removal of ROS, promoted angiogenesis, and re-epithelialization. Collectively, our investigation provides an in situ, convenient, and effective approach for diabetic wound repair.

3D bioprinting bioglass to construct vascularized full-thickness skin substitutes for wound healing

Constructing three-dimensional (3D) bioprinted skin tissues that accurately replicate the mechanical properties of native skin and provide adequate oxygen and nutrient support remains a formidable challenge. In this study, we incorporated phosphosilicate calcium bioglasses (PSCs), a type of bioactive glass (BG), into the bioinks used for 3D bioprinting. The resulting bioink exhibited mechanical properties and biocompatibility that closely resembled those of natural skin. Utilizing 3D bioprinting technology, we successfully fabricated full-thickness skin substitutes, which underwent comprehensive evaluation to assess their regenerative potential in treating full-thickness skin injuries in rats. Remarkably, the skin substitutes loaded with PSCs exhibited exceptional angiogenic activity, as evidenced by the upregulation of angiogenesis-related genes in vitro and the observation of enhanced vascularization in wound tissue sections in vivo. These findings conclusively demonstrated the outstanding efficacy of PSCs in promoting angiogenesis and facilitating the repair of full-thickness skin wounds. The insights garnered from this study provide a valuable reference strategy for the development of skin tissue grafts with potent angiogenesis-inducing capabilities.

The stromal microenvironment and ovarian aging: mechanisms and therapeutic opportunities

For decades, most studies of ovarian aging have focused on its functional units, known as follicles, which include oocytes and granulosa cells. However, in the ovarian stroma, there are a variety of somatic components that bridge the gap between general aging and ovarian senescence. Physiologically, general cell types, microvascular structures, extracellular matrix, and intercellular molecules affect folliculogenesis and corpus luteum physiology alongside the ovarian cycle. As a result of damage caused by age-related metabolite accumulation and external insults, the microenvironment of stromal cells is progressively remodeled, thus inevitably perturbing ovarian physiology. With the established platforms for follicle cryopreservation and in vitro maturation and the development of organoid research, it is desirable to develop strategies to improve the microenvironment of the follicle by targeting the perifollicular environment. In this review, we summarize the role of stromal components in ovarian aging, describing their age-related alterations and associated effects. Moreover, we list some potential techniques that may mitigate ovarian aging based on their effect on the stromal microenvironment.

A systematic review of the research progress of traditional Chinese medicine against pulmonary fibrosis: from a pharmacological perspective

Pulmonary fibrosis is a chronic progressive interstitial lung disease caused by a variety of etiologies. The disease can eventually lead to irreversible damage to the lung tissue structure, severely affecting respiratory function and posing a serious threat to human health. Currently, glucocorticoids and immunosuppressants are the main drugs used in the clinical treatment of pulmonary fibrosis, but their efficacy is limited and they can cause serious adverse effects. Traditional Chinese medicines have important research value and potential for clinical application in anti-pulmonary fibrosis. In recent years, more and more scientific researches have been conducted on the use of traditional Chinese medicine to improve or reduce pulmonary fibrosis, and some important breakthroughs have been made. This review paper systematically summarized the research progress of pharmacological mechanism of traditional Chinese medicines and their active compounds in improving or reducing pulmonary fibrosis. We conducted a systematic search in several main scientific databases, including PubMed, Web of Science, and Google Scholar, using keywords such as idiopathic pulmonary fibrosis, pulmonary fibrosis, interstitial pneumonia, natural products, herbal medicine, and therapeutic methods. Ultimately, 252 articles were included and systematically evaluated in this analysis. The anti-fibrotic mechanisms of these traditional Chinese medicine studies can be roughly categorized into 5 main aspects, including inhibition of epithelial-mesenchymal transition, anti-inflammatory and antioxidant effects, improvement of extracellular matrix deposition, mediation of apoptosis and autophagy, and inhibition of endoplasmic reticulum stress. The purpose of this article is to provide pharmaceutical researchers with information on the progress of scientific research on improving or reducing Pulmonary fibrosis with traditional Chinese medicine, and to provide reference for further pharmacological research.

Therapeutic role of growth factors in treating diabetic wound

Wounds in diabetic patients, especially diabetic foot ulcers, are more difficult to heal compared with normal wounds and can easily deteriorate, leading to amputation. Common treatments cannot heal diabetic wounds or control their many complications. Growth factors are found to play important roles in regulating complex diabetic wound healing. Different growth factors such as transforming growth factor beta 1, insulin-like growth factor, and vascular endothelial growth factor play different roles in diabetic wound healing. This implies that a therapeutic modality modulating different growth factors to suit wound healing can significantly improve the treatment of diabetic wounds. Further, some current treatments have been shown to promote the healing of diabetic wounds by modulating specific growth factors. The purpose of this study was to discuss the role played by each growth factor in therapeutic approaches so as to stimulate further therapeutic thinking.

Photopolymerized silk fibroin gel for advanced burn wound care

The future of burn wound treatment lies in developing bioactive dressings for faster and more effective healing and regeneration. Silk fibroin (SF) hydrogels have proven regenerative abilities and are being explored as a burn wound dressing. However, unfavorable gelation conditions limit the processability and clinical application. Herein a white light-responsive photopolymerization technique was adapted for gelation via photooxidation of tyrosine. To render the gel suitable for application to irregular and non-planar burn surfaces, SF gel-incorporated dressing (SFD) was fabricated. The mild gelation conditions using white light afforded the loading of drugs for local delivery. The moisture balance ability of the dressing was confirmed by the favorable measures of swelling capacity (106 ± 1 %) and moisture retention (≈10 h). The in vitro cytocompatibility of the gel was confirmed using HaCaT cells. Finally, in vivo performance of the SFD was tested on a second-degree burn in a rodent model. The gross analysis and histological assessment revealed scarless healing in SFD-treated groups. Overall, the SFD developed in this work is shown to be a promising candidate for advanced burn wound care.

Light-Mediated 3D Printing of Micro-Pyramid-Decorated Tailorable Wound Dressings with Endogenous Growth Factor Sequestration for Improved Wound Healing

Medical dressings play an important role in the field of tissue engineering owing to their ability to accelerate the process of wound healing. Great efforts have been made to fabricate wound dressings with distinctive features for promoting wound healing. However, most of the current synthesis methods either generate dressings of uniform size or involve complex fabrication techniques, thus limiting their commercialization for the personalized dressings. We report here a dressing, which presents a paradigm shift in the design of the dressing from uniform films to a micro-patterned film. The hypothesis driving the design is the ability of the 3D patterns to provide an efficient transient matrix filling the depth of the wound rather than just providing a barrier and slight re-epithelialization. We demonstrate the use of the digital light processing 3D printing technique to generate micro-pyramid-decorated wound healing dressings with individualized design and with bio-compatible gelatin methacryloyl to contact the wounded areas. In addition to providing better adhesion to the migratory cells, the micro-pyramids also enable covalent conjugation of heparin, providing capability to sequester endogenous growth factors (GFs). Based on these advantages, the developed dressing not only adheres strongly to the wound bed but also promotes the treatment of a rat wound model by utilizing the power of endogenous GFs for tissue regeneration. Thus, it is believed that the developed dressing can break through the limitation of traditional wound treatment and be an ideal candidate for wound healing.

Multifunctional Electrospinning Polyhydroxyalkanoate Fibrous Scaffolds with Antibacterial and Angiogenesis Effects for Accelerating Wound Healing

To treat large-scale wounds or chronic ulcers, it is highly desirable to develop multifunctional wound dressings that integrate antibacterial and angiogenic properties. While many biomaterials have been fabricated as wound dressings for skin regeneration, few reports have addressed the issue of complete skin regeneration due to the lack of vasculature and hair follicles. Herein, an instructive poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB) fibrous wound dressing that integrates an antibacterial ciprofloxacin (CIP) and pro-angiogenic dimethyloxalylglycine (DMOG) is successfully prepared via electrospinning. The resultant dressings exhibit suitable flexibility with tensile strength and elongation at break up to 4.08 ± 0.18 MPa and 354.8 ± 18.4%, respectively. The in vitro results revealed that the groups of P34HB/CIP/DMOG dressings presented excellent biocompatibility on cell proliferation and significantly promote the spread and migration of L929 cells in both transwell and scratch assays. Capillary-like tube formation is also significantly enhanced in the P34HB/CIP/DMOG group dressings. Additionally, dressings from the P34HB/CIP and P34HB/CIP/DMOG groups show a broad spectrum of antimicrobial action against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. In vivo studies further demonstrated that the prepared dressings in the P34HB/CIP/DMOG group not only improved wound closure, increased re-epithelialization and collagen formation, as well as reduced inflammatory response but also increased angiogenesis and remodeling, resulting in complete skin regeneration and hair follicles. Collectively, this work provides a simple but efficient approach for the design of a versatile wound dressing with the potential to have a synergistic effect on the rapid stimulation of angiogenesis as well as antibacterial activity in full-thickness skin repair.

Novel strategies for designing regenerative skin products for accelerated wound healing

Healthy skin protects from pathogens, water loss, ultraviolet rays, and also maintains homeostasis conditions along with sensory perceptions in normal circumstances. Skin wound healing mechanism is a multi-phased biodynamic process that ultimately triggers intercellular and intracellular mechanisms. Failure to implement the normal and effective healing process may result in chronic injuries and aberrant scarring. Chronic wounds lead to substantial rising healthcare expenditure, and innovative methods to diagnose and control severe consequences are urgently needed. Skin tissue engineering (STE) has achieved several therapeutic accomplishments during the last few decades, demonstrating tremendous development. The engineered skin substitutes provide instant coverage for extensive wounds and facilitate the prevention of microbial infections and fluid loss; furthermore, they help in fighting inflammation and allow rapid neo-tissue formation. The current review primarily focused on the wound recovery and restoration process and the current conditions of STE with various advancements and complexities associated with different strategies such as cell sources, biopolymers, innovative fabrication techniques, and growth factors delivery systems.

Statistic Copolymers Working as Growth Factor-Binding Mimics of Fibronectin

Growth factors (GFs) play important roles in biological system and are widely used in tissue regeneration. However, their application is greatly hindered by short in vivo lifetime of GFs. GFs are bound to fibronectin dynamically in the extracellular matrix, which inspired the authors to mimic the GF binding domain of fibronectin and design GF-binding amphiphilic copolymers bearing positive charges. The optimal amino acid polymer can bind to a variety of representative GFs, such as bone morphogenetic protein-2 (BMP-2) and TGF-β1 from the transforming growth factor-β superfamily, PDGF-AA and PDGF-BB from the platelet-derived growth factor family, FGF-10 and FGF-21 from the fibroblast growth factor family, epidermal growth factor from the EGF family and hepatocyte growth factor from the plasminogen-related growth factor family, with binding affinities up to the nanomolar level. 3D scaffolds immobilized with the optimal copolymer enable sustained release of loaded BMP-2 without burst release and significantly enhances the in vivo function of BMP-2 for bone formation. This strategy opens new avenues in designing GF-binding copolymers as synthetic mimics of fibronectin for diverse applications.

Neuroendocrine-Immune Regulatory Network of Eucommia ulmoides Oliver

Eucommia ulmoides Oliver (E. ulmoides) is a popular medicinal herb and health supplement in China, Japan, and Korea, and has a variety of pharmaceutical properties. The neuroendocrine-immune (NEI) network is crucial in maintaining homeostasis and physical or psychological functions at a holistic level, consistent with the regulatory theory of natural medicine. This review aims to systematically summarize the chemical compositions, biological roles, and pharmacological properties of E. ulmoides to build a bridge between it and NEI-associated diseases and to provide a perspective for the development of its new clinical applications. After a review of the literature, we found that E. ulmoides has effects on NEI-related diseases including cancer, neurodegenerative disease, hyperlipidemia, osteoporosis, insomnia, hypertension, diabetes mellitus, and obesity. However, clinical studies on E. ulmoides were scarce. In addition, E. ulmoides derivatives are diverse in China, and they are mainly used to enhance immunity, improve hepatic damage, strengthen bones, and lower blood pressure. Through network pharmacological analysis, we uncovered the possibility that E. ulmoides is involved in functional interactions with cancer development, insulin resistance, NAFLD, and various inflammatory pathways associated with NEI diseases. Overall, this review suggests that E. ulmoides has a wide range of applications for NEI-related diseases and provides a direction for its future research and development.

Chitosan-CaP microflowers and metronidazole loaded calcium alginate sponges with enhanced antibacterial, hemostatic and osteogenic properties for the prevention of dry socket after tooth removal

Tooth removal, particularly for patients with severe periodontitis, can frequently cause massive bleeding, postoperative infection, and bone resorption, resulting in a dry socket. Thus, developing bio-multifunctional materials with excellent antibacterial, hemostatic, and osteogenic characteristics for the prevention of dry sockets after tooth removal is highly desirable in clinical applications. Herein, chitosan-CaP microflowers (CM) and metronidazole (MD) loaded calcium alginate (CA) sponges (CA@CM/MD) with enhanced antibacterial, hemostatic, and osteogenic properties were developed via Ca²⁺ crosslinking, lyophilization, and electrostatic interaction for the prevention of dry socket after tooth removal. The fabricated CM particles display 3-dimensional, relatively homogeneous, and flower-shaped architectures. The CA@CM/MD composite sponges were facilely shaped into the tooth root as well as exhibit interconnected porous and lamellar structures with remarkable porosity, suitable maximum swelling ratio, as well as excellent compressive and hemostatic performance. Besides, the in vitro cellular assessment demonstrates that the prepared CA@CM/MD composite sponges possess satisfactory cytocompatibility. Importantly, the designed sponges significantly suppress the growth of S. aureus and E. coli, as well as promote cellular osteogenic differentiation by upregulating the formation of alkaline phosphatase. Our findings indicate that the tooth root-shaped composite sponges hold great promise for wound management after tooth removal.

Updates in immunocompatibility of biomaterials: applications for regenerative medicine

INTRODUCTION

Biomaterials, either metallic, ceramic, or polymeric, can be used in medicine as a part of the implants, dialysis membranes, bone scaffolds, or components of artificial organs. Polymeric biomaterials cover a vast range of biomedical applications. The biocompatibility and immunocompatibility of polymeric materials are of fundamental importance for their possible therapeutic uses, as the immune system can intervene in the materials' performance. Therefore, based on application, different routes can be utilized for immunoregulation.

AREAS COVERED

As different biomaterials can be modulated by different strategies, this study aims to summarize and evaluate the available methods for the immunocompatibility enhancement of more common polymeric biomaterials based on their nature. Different strategies such as surface modification, physical characterization, and drug incorporation are investigated for the immunomodulation of nanoparticles, hydrogels, sponges, and nanofibers.

EXPERT OPINION

Recently, strategies for triggering appropriate immune responses by functional biomaterials have been highlighted. As most strategies correspond to the physical and surface properties of biomaterials, specific modulation can be conducted for each biomaterial system. Besides, different applications require different modulations of the immune system. In the future, the selection of novel materials and immune regulators can play a role in tuning the immune system for regenerative medicine.

Combinatorial wound healing therapy using adhesive nanofibrous membrane equipped with wearable LED patches for photobiomodulation

Wound healing is the dynamic tissue regeneration process replacing devitalized and missing tissue layers. With the development of photomedicine techniques in wound healing, safe and noninvasive photobiomodulation therapy is receiving attention. Effective wound management in photobiomodulation is challenged, however, by limited control of the geometrical mismatches on the injured skin surface. Here, adhesive hyaluronic acid-based gelatin nanofibrous membranes integrated with multiple light-emitting diode (LED) arrays are developed as a skin-attachable patch. The nanofibrous wound dressing is expected to mimic the three-dimensional structure of the extracellular matrix, and its adhesiveness allows tight coupling between the wound sites and the flexible LED patch. Experimental results demonstrate that our medical device accelerates the initial wound healing process by the synergetic effects of the wound dressing and LED irradiation. Our proposed technology promises progress for wound healing management and other biomedical applications.

Increased migratory activity and cartilage regeneration by superficial-zone chondrocytes in enzymatically treated cartilage explants

Background

Limited chondrocyte migration and impaired cartilage-to-cartilage healing is a barrier in cartilage regenerative therapy. Collagenase treatment and delivery of a chemotactic agent may play a positive role in chondrocyte repopulation at the site of cartilage damage. This study evaluated chondrocyte migratory activity after enzymatic treatment in cultured cartilage explant. Differential effects of platelet-derived growth factor (PDGF) dimeric isoforms on the migratory activity were investigated to define major chemotactic factors for cartilage.

Methods

Full-thickness cartilage (4-mm³ blocks) were harvested from porcine femoral condyles and subjected to explant culture. After 15 min or 60 min of actinase and collagenase treatments, chondrocyte migration and infiltration into a 0.5-mm cartilage gap was investigated. Cell morphology and lubricin, keratan sulfate, and chondroitin 4 sulfate expression in superficial- and deep-zone chondrocytes were assessed. The chemotactic activities of PDGF-AA, −AB, and -BB were measured in each zone of chondrocytes, using a modified Boyden chamber assay. The protein and mRNA expression and histological localization of PDGF-β were analyzed by western blot analysis, real-time reverse transcription polymerase chain reaction (RT-PCR), and immunohistochemistry, and results in each cartilage zone were compared.

Results

Superficial-zone chondrocytes had higher migratory activity than deep-zone chondrocytes and actively bridged the cartilage gap, while metachromatic staining by toluidine blue and immunoreactivities of keratan sulfate and chondroitin 4 sulfate were detected around the cells migrating from the superficial zone. These superficial-zone cells with weak immunoreactivity for lubricin tended to enter the cartilage gap and possessed higher migratory activity, while the deep-zone chondrocytes remained in the lacuna and exhibited less migratory activity. Among PDGF isoforms, PDGF-AB maximized the degree of chemotactic activity of superficial zone chondrocytes. Increased expression of PDGF receptor-β was associated with higher migratory activity of the superficial-zone chondrocytes.

Conclusions

In enzymatically treated cartilage explant culture, chondrocyte migration and infiltration into the cartilage gap was higher in the superficial zone than in the deep zone. Preferential expression of PDGF receptor-β combined with the PDGF-AB dimeric isoform may explain the increased migratory activity of the superficial-zone chondrocytes. Cells migrating from superficial zone may contribute to cartilage regeneration.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05210-2.

Surface engineering of 3D-printed scaffolds with minerals and a pro-angiogenic factor for vascularized bone regeneration

Scaffolds functionalized with biomolecules have been developed for bone regeneration but inducing the regeneration of complex structured bone with neovessels remains a challenge. For this study, we developed three-dimensional printed scaffolds with bioactive surfaces coated with minerals and platelet-derived growth factor. The minerals were homogeneously deposited on the surface of the scaffold using 0.01 M NaHCO₃ with epigallocatechin gallate in simulated body fluid solution (M2). The M2 scaffold demonstrated enhanced mineral coating amount per scaffold with a greater compressive modulus than the others which used different concentration of NaHCO₃. Then, we immobilized PDGF on the mineralized scaffold (M2/P), which enhanced the osteogenic differentiation of human adipose derived stem cells in vitro and promoted the secretion of pro-angiogenic factors. Cells cultured in M2/P showed remarkable ratio of osteocalcin- and osteopontin-positive nuclei, and M2/P-derived medium induced endothelial cells to form tubule structures. Finally, the implanted M2/P scaffolds onto mouse calvarial defects had regenerated bone in 80.8 ± 9.8% of the defect area with the arterioles were formed, after 8 weeks. In summary, our scaffold, which composed of minerals and pro-angiogenic growth factor, could be used therapeutically to improve the regeneration of bone with a highly vascularized structure. STATEMENT OF SIGNIFICANCE: Surface engineered scaffolds have been developed for bone regeneration but inducing the volumetric regeneration of bone with neovessels remains a challenge. In here, we developed 3D printed scaffolds with bioactive surfaces coated with bio-minerals and platelet-derived growth factors. We proved that the 0.01 M NaHCO₃ with polyphenol in simulated body fluid solution enhanced the deposition of bio-minerals and even distribution on the surface of scaffold. The in vitro studies demonstrated that the attached cells on the bioactive surface showed the enhanced osteogenic differentiation and secretion of pro-angiogenic factors. Finally, the scaffold with bioactive surface not only improved the regenerated volume of bone tissues but also increased neovessel formation after in vivo implantation onto mouse calvarial defect.

Advancements in the Delivery of Growth Factors and Cytokines for the Treatment of Cutaneous Wound Indications

Significance: Wound healing involves the phasic production of growth factors (GFs) and cytokines to progress an acute wound to a resolved scar. Dysregulation of these proteins contributes to both wound chronicity and excessive scarring. Direct supplementation of GFs and cytokines for treatment of healing and scarring complications has, however, been disappointing. Failings likely relate to an inability to deliver recombinant proteins at physiologically relevant levels to an environment conducive to healing. Recent Advances: Inspired by the extracellular matrix, natural biomaterials have been developed that resemble human skin, and are capable of delivering bioactives. Hybrid biomaterials made using multiple polymers, fabrication methods, and proteins are proving efficacious in animal models of acute and impaired wound healing. Critical Issues: For clinical translation, these delivery systems must be tailored for specific wound indications and the correct phase of healing. GFs and cytokines must be delivered in a controlled manner that will target specific healing or scarring impairments. Preclinical assessment in clinically relevant animal models of impaired or excessive healing is critical. Future Directions: Clinical success will likely depend on the GF or cytokine selected, their compatibility with the chosen biomaterial(s), degradation rate of the fabricated system, and the degree of control over release kinetics. Further testing is essential to assess which wound indications are most suited to specific delivery systems and to prove whether they provide superior efficacy over direct protein therapies.

A collagen-AS/εPLL bilayered artificial substitute regulates anti-inflammation and infection for initial inflamed wound healing

Despite the development of advanced tissue engineering substitutes, inflammation is still a significant problem that can arise from inflamed burn injuries, chronic wounds, or microbial diseases. Although topical wound dressing accelerates healing by minimizing or preventing the consequences of skin inflammation, there remains a need for the development of a novel substitute scaffold that can effectively eliminate immoderate inflammation and infection in the initial phase of the healing meachanism. In this study, an artificial skin substitute scaffold fabricated with asiaticoside (AS) and epsilon-poly-L-lysine (εPLL) was prepared. Upon the release of these bioactive compounds, they accelerate wound healing and inhibit any bacterial infection at the wound site. We determined whether AS and εPLL exhibit anti-inflammatory and bactericidal effects through different mechanisms. Collectively, the collagen-AS/εPLL artificial skin substitute could be a significant therapeutic agent for scar-less rapid wound healing (without infection and inflammation) of initially-inflamed full-thickness wounds.

Injectable nanofiber-polysaccharide self-healing hydrogels for wound healing

Injectable self-healing hydrogels of natural polysaccharides that mimic the extracellular matrix to promote cellular growth are attractive materials for wound healing. Here, a novel hydrogel was fabricated based on carboxymethyl chitosan (CS) and aldehyde functionalized sodium alginate via Schiff base reaction. To enhance the hydrogel's properties, carboxymethyl-functionalized polymethyl methacrylate (PMAA) short nanofibers were obtained through sodium hydroxide-treated polymethyl methacrylate nanofibers, and added to a CS solution. Gelation time was determined for different hydrogels including 0-5 mg/mL PMAA short nanofibers. The nanofiber hydrogels were tested for their injectability and self-healing abilities and were demonstrated to be easily injectable with excellent self-healing abilities. Additionally, in vitro cytocompatibility experiments, good interaction between the cultured cells and hydrogels was seen. Further, the polysaccharide hydrogel containing short PMMA nanofibers significantly facilitated wound healing in rats compared with the polysaccharide hydrogel and control groups. Thus, the developed hydrogel has great potential for wound healing applications.

Antimicrobial Peptides: The Promising Therapeutics for Cutaneous Wound Healing

Chronic wound infections have caused an increasing number of deaths and economic burden, which necessitates wound treatment options. Hitherto, the development of functional wound dressings has achieved reasonable progress. Antibacterial agents, growth factors, and miRNAs are incorporated in different wound dressings to treat various types of wounds. As an effective antimicrobial agent and emerging wound healing therapeutic, antimicrobial peptides (AMPs) have attracted significant attention. The present study focuses on the application of AMPs in wound healing and discusses the types, properties and formulation strategies of AMPs used for wound healing. In addition, the clinical trial and the current status of studies on "antimicrobial peptides and wound healing" are elaborated through bibliometrics. Also, the challenges and opportunities for further development and utilization of AMP formulations in wound healing are discussed.

Modifications of polysaccharide-based biomaterials under structure-property relationship for biomedical applications

Polysaccharides are well accepted biomaterials that have attracted considerable attention. Compared with other materials under research, polysaccharides show unique advantages: they are available in nature and are normally easily acquired, those acquired from nature show favorable immunogenicity, and are biodegradable and bioavailable. The bioactivity and possible applications are based on their chemical structure; however, naturally acquired polysaccharides sometimes have unwanted flaws that limit further applications. For this reason, carefully summarizing the possible modifications of polysaccharides to improve them is crucial. Structural modifications can not only provide polysaccharides with additional functional groups but also change their physicochemical properties. This review based on the structure-property relation summarizes the common chemical modifications of polysaccharides, the related bioactivity changes, possible functionalization methods, and major possible biomedical applications based on modified polysaccharides.

Traditional application and modern pharmacological research of Eucommia ulmoides Oliv

As a Traditional Chinese Medicine, Eucommia ulmoides Oliv. has been used for the treatment of various diseases since ancient times, involving lumbar pain, knee pain, osteoporosis, hepatoprotection, paralysis, intestinal haemorrhoids, vaginal bleeding, abortion, spermatorrhoea, foot fungus, anti-aging etc. With the developing discovery of E. ulmoides extracts and its active components in various pharmacological activities, E. ulmoides has gained more and more attention. Up to now, E. ulmoides has been revealed to show remarkable therapeutic effects on hypertension, hyperglycemia, diabetes, obesity, osteoporosis, Parkinson's disease, Alzheimer's disease, sexual dysfunction. E. ulmoides has also been reported to possess antioxidant, anti-inflammatory, neuroprotective, anti-fatigue, anti-aging, anti-cancer and immunoregulation activities etc. Along these lines, this review summarizes the traditional application and modern pharmacological research of E. ulmoides, providing novel insights of E. ulmoides in the treatment of various diseases.

Near-infrared light-controllable MXene hydrogel for tunable on-demand release of therapeutic proteins

Precise delivery of therapeutic protein drugs that specifically modulate desired cellular responses is critical in clinical practice. However, the spatiotemporal regulation of protein drugs release to manipulate the target cell population in vivo remains a huge challenge. Herein, we have rationally developed an injectable and Near-infrared (NIR) light-responsive MXene-hydrogel composed of Ti₃C₂, agarose, and protein that enables flexibly and precisely control the release profile of protein drugs to modulate cellular behaviors with high spatiotemporal precision remotely. As a proof-of-concept study, we preloaded hepatic growth factor (HGF) into the MXene@hydrogel (MXene@agarose/HGF) to activate the c-Met-mediated signaling by NIR light. We demonstrated NIR light-instructed cell diffusion, migration, and proliferation at the user-defined localization, further promoting angiogenesis and wound healing in vivo. Our approach's versatility was validated by preloading tumor necrotic factor-α (TNF-α) into the composite hydrogel (MXene@agarose/TNF-α) to promote the pro-apoptotic signaling pathway, achieving the NIR light-induced programmed cell deaths (PCD) of tumor spheroids. Taking advantage of the deep-tissue penetrative NIR light, we could eradicate the deep-seated tumors in a xenograft model exogenously. Therefore, the proposed MXene-hydrogel provides the impetus for developing therapeutic synthetic materials for light-controlled drug release under thick tissue, which will find promising applications in regenerative medicine and tumor therapy. STATEMENT OF SIGNIFICANCE: Current stimuli-responsive hydrogels for therapeutic proteins delivery mainly depend on self-degradation, passive diffusion, or the responsiveness to cues relevant to diseases. However, it remains challenging to spatiotemporally deliver protein-based drugs to manipulate the target cell population in vivo in an "on-demand" manner. Therefore, we have rationally constructed an injectable and Near-infrared (NIR) light-responsive composite hydrogel by embedding Ti₃C₂ MXene and protein drugs within an agarose hydrogel to enable the remote control of protein drugs delivery with high spatiotemporal precision. The NIR light-controlled release of the growth factor or cytokine has been carried out to regulate receptor-mediated cellular behaviors under deep tissue for skin wound healing or cancer therapy. This system will provide the potential for precision medicine through the development of intelligent drug delivery systems.

Functionalization of an Electroactive Self-Healing Polypyrrole-Grafted Gelatin-Based Hydrogel by Incorporating a Polydopamine@AgNP Nanocomposite

Hydrogels are considered a promising wound dressing owing to their ability to absorb wound exudates and their moist network structure for skin regeneration. It is of great significance to give added multiple functions to hydrogels for wound healing. In this paper, we present a gelatin-based hydrogel with self-healing ability, conductivity, and antibacterial and antioxidant activities. Dopamine was added into an alkaline solution to polymerize into polydopamine (PDA), which was used to reduce AgNO₃ into Ag nanoparticles (AgNPs) to gain a PDA@AgNP composite. Polypyrrole-grafted gelatin (PPyGel) was dissolved in a PDA@AgNP solution and ferric ions were used as a cross-linking agent to form PDA@AgNPs-PPyGel-Fe hydrogels. The as-prepared hydrogels are soft and ductile and exhibit porous structures with pore sizes from 20 to 50 μm. The hydrogels have high water absorption ability, indicating the potential to absorb wound exudates. PPy and Fe³⁺ endow the hydrogels with slightly higher conductivity than that of skin tissue, indicating the ability to effectively transmit bioelectric signals for skin regeneration. The ionic interactions and hydrogen bonding in hydrogels make them possess self-healing ability, and the self-healing process can be completed in 30 min. PDA confers hydrogels with effective antioxidant activities, while AgNPs endow hydrogels with good antibacterial activities. Moreover, the hydrogels possess good blood compatibility and cytocompatibility. In sum, the developed hydrogel has potential applications as wound dressings.

Fabrication of In Situ Layered Hydrogel Scaffold for the Co-delivery of PGDF-BB/Chlorhexidine to Regulate Proinflammatory Cytokines, Growth Factors, and MMP-9 in a Diabetic Skin Defect Albino Rat Model

Diabetes mellitus (DM)-associated impairments in wound healing include prolonged inflammation, the overexpression of matrix metalloproteases (MMPs), and low levels of growth factors at the wound site. To this end, a layer-by-layer scaffold (S_L-B-L) made of cross-linked silk fibroin and hyaluronic acid is developed to deliver chlorhexidine, an antimicrobial agent and an MMP-9 inhibitor, along with the PDGF-BB protein. S_L-B-L exhibited highly porous morphology. Diabetic rats treated with S_L-B-L demonstrated an early wound closure, a fully reconstructed epithelial layer by 14 days, and reduced levels of IL-6, TNF-α, TGF-β1, and MMP-9. Interestingly, S_L-B-L treatment increased angiogenesis, the bioavailability of collagen, DNA content, and VEGF-A levels. Furthermore, enhanced keratinocyte-fibroblast interaction along with ordered collagen deposition was observed in S_L-B-L-treated rats. Most interestingly, when compared with a clinically used scaffold SEESKIN+, S_L-B-L outperformed in promoting wound healing in a diabetic rat model by regulating the inflammation while delivering growth factor and the MMP-9 inhibitor.

Molecular Imprinting Strategies for Tissue Engineering Applications: A Review

Tissue Engineering (TE) represents a promising solution to fabricate engineered constructs able to restore tissue damage after implantation. In the classic TE approach, biomaterials are used alongside growth factors to create a scaffolding structure that supports cells during the construct maturation. A current challenge in TE is the creation of engineered constructs able to mimic the complex microenvironment found in the natural tissue, so as to promote and guide cell migration, proliferation, and differentiation. In this context, the introduction inside the scaffold of molecularly imprinted polymers (MIPs)—synthetic receptors able to reversibly bind to biomolecules—holds great promise to enhance the scaffold-cell interaction. In this review, we analyze the main strategies that have been used for MIP design and fabrication with a particular focus on biomedical research. Furthermore, to highlight the potential of MIPs for scaffold-based TE, we present recent examples on how MIPs have been used in TE to introduce biophysical cues as well as for drug delivery and sequestering.

Fabrication and characterization of mucoadhesive bioplastic patch via coaxial polylactic acid (PLA) based electrospun nanofibers with antimicrobial and wound healing application

Polylactic acid (PLA) is the second-highest consumed bioplastic in the world. PVP/PLA-PEO complex nanofibers encapsulating collagen and cefazolin dressing scaffold were fabricated using a coaxial electrospinning method to target the release of the encapsulated compounds. It was observed that in collagen doses of 10 and 20%, the speed of healing showed a significant difference with the control sample, but the dose of 40% caused a decrease in wound healing rate in mice. The nanofibers' morphology and surface roughness were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The mechanical properties and adhesion strength of the scaffolds were investigated. The scaffolds' antimicrobial activity was evaluated by disk diffusion method against the E. coli, S. aureus, and P. aeruginosa. The results indicated a positive effect on the antimicrobial activity of the samples. In this study, we were able to prolong the effect of scaffolds by changing the pattern of release of cefazolin from inside the nanofibers. Possible interactions between the polymers and the encapsulated compounds were investigated using Fourier-transform infrared spectroscopy (FTIR). Finally, in-vivo and histological tests were performed to evaluate the efficacy of the scaffolds in accelerating wound healing.

Engineered biomaterial strategies for controlling growth factors in tissue engineering

Growth factors are multi-functional signaling molecules that coordinate multi-stage process of wound healing. During wound healing, growth factors are transmitted to wound environment in a positive and physiologically related way, therefore, there is a broad prospect for studying the mediated healing process through growth factors. However, growth factors (GFs) themselves have disadvantages of instability, short life, rapid inactivation of physiological conditions, low safety and easy degradation, which hinder the clinical use of GFs. Rapid development of delivery strategies for GFs has been trying to solve the instability and insecurity of GFs. Particularly, in recent years, GFs delivered by scaffolds based on biomaterials have become a hotspot in this filed. This review introduces various delivery strategies for growth factors based on new biodegradable materials, especially polysaccharides, which could provide guidance for the development of the delivery strategies for growth factors in clinic.

Biomaterials Regulating Bone Hematoma for Osteogenesis

Blood coagulation in tissue healing not only prevents blood loss, but also forms a natural scaffold for tissue repair and regeneration. As blood clot formation is the initial and foremost phase upon bone injury, and the quality of blood clot (hematoma) orchestrates the following inflammatory and cellular processes as well as the subsequent callus formation and bone remodeling process. Inspired by the natural healing hematoma, tissue-engineered biomimic scaffold/hydrogels and blood prefabrication strategies attract significant interests in developing functional bone substitutes. The alteration of the fracture hematoma ca significantly accelerate or impair the overall bone healing process. This review summarizes the impact of biomaterials on blood coagulation and provides evidence on fibrin network structure, growth factors, and biomolecules that contribute to bone healing within the hematoma. The aim is to provide insights into the development of novel implant and bone biomaterials for enhanced osteogenesis. Advances in the understanding of biomaterial characteristics (e.g., morphology, chemistry, wettability, and protein adsorption) and their effect on hematoma properties are highlighted. Emphasizing the importance of the initial healing phase of the hematoma endows the design of advanced biomaterials with the desired regulatory properties for optimal coagulation and hematoma properties, thereby facilitating enhanced osteogenesis and ideal therapeutic effects.

The immunologic changes during different phases of intestinal anastomotic healing

Intestinal anatomosis is a complex and multicellular process that involving three overlapped phases: exudative phase, proliferative phase, and reparative phase. Undisturbed anastomotic healings are crucial for the recovery of patients after operations but unsuccessful healings are linked with a considerable mortality. This time, we concentrate on the immunologic changes during different phases of intestinal anastomotic healing and select several major immune cells and cytokines of each phase to get a better understanding of these immunologic changes in different phases, which will be significant for more precise therapy strategies in anastomoses.

Biomimetic hydrogels with spatial- and temporal-controlled chemical cues for tissue engineering

Biomimetic hydrogels have emerged as the most useful tissue engineering scaffold materials. Their versatile chemistry can recapitulate multiple physical and chemical features to integrate cells, scaffolds, and signaling molecules for tissue regeneration. Due to their highly hydrophilic nature hydrogels can recreate nutrient-rich aqueous environments for cells. Soluble regulatory molecules can be incorporated to guide cell proliferation and differentiation. Importantly, the controlled dynamic parameters and spatial distribution of chemical cues in hydrogel scaffolds are critical for cell-cell communication, cell-scaffold interaction, and morphogenesis. Herein, we review biomimetic hydrogels that provide cells with spatiotemporally controlled chemical cues as tissue engineering scaffolds. Specifically, hydrogels with temporally controlled growth factor-release abilities, spatially controlled conjugated bioactive molecules/motifs, and targeting delivery and reload properties for tissue engineering applications are discussed in detail. Examples of hydrogels that possess clinically favorable properties, such as injectability, self-healing ability, stimulus-responsiveness, and pro-remodeling features, are also covered.

Bioactive antibacterial bilayer PCL/gelatin nanofibrous scaffold promotes full-thickness wound healing

Treatment of diabetic, chronic, and full-thickness wounds is a challenge as these injuries usually lead to infections that cause delayed and inappropriate healing. Therefore, fabrication of skin scaffolds with prolonged antibacterial properties are of great interest. Due to this demand, bilayered nanofibrous scaffolds were fabricated based on polycaprolactone and gelatin. The top layer of these scaffolds contained amoxicillin as a model drug and the bottom layer was loaded with zinc oxide nanoparticles to accelerate wound healing. Several characterization techniques including FTIR, SEM, swelling, tensile test, in vitro degradation, drug release, antibacterial activity, and MTT assay were used to assess physical, mechanical, and biological properties of produced nanofibers. SEM results demonstrated that bilayered scaffolds have smooth bead-free microstructures while in vitro release test showed that samples have a sustained release for amoxicillin up to 144 h (tested time). Disk diffusion assessment confirmed the potency of scaffolds for hindering bacterial growth while results of cytotoxicity evaluation revealed that scaffolds could effectively accelerate cell proliferation. Finally, in vivo tests on full-thickness rat models revealed that fabricated nanofibers accelerate wound contraction, increase collagen deposition and angiogenesis, and prevent scar formation. Altogether, results showed that fabricated scaffolds are promising candidates for treatment of full-thickness wounds.

Mesenchymal stem cell-laden, personalized 3D scaffolds with controlled structure and fiber alignment promote diabetic wound healing

The management of diabetic wounds remains a major therapeutic challenge in clinics. Herein, we report a personalized treatment using 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with bone marrow mesenchymal stem cells (BMSCs). The 3D scaffolds have customizable sizes, depths, and shapes, enabling them to fit a variety of type 2 diabetic wounds. In addition, the 3D scaffolds are shape-recoverable in atmosphere and water following compression. The BMSCs-laden 3D scaffolds are capable of enhancing the formation of granulation tissue, promoting angiogenesis, and facilitating collagen deposition. Further, such scaffolds inhibit the formation of M1-type macrophages and the expression of pro-inflammatory cytokines IL-6 and TNF-α and promote the formation of M2-type macrophages and the expression of anti-inflammatory cytokines IL-4 and IL-10. Taken together, BMSCs-laden, 3D nanofiber scaffolds with controlled structure and alignment hold great promise for the treatment of diabetic wounds. STATEMENT OF SIGNIFICANCE: In this study, we developed 3D radially and vertically aligned nanofiber scaffolds to transplant bone marrow mesenchymal stem cells (BMSCs). We personalized 3D scaffolds that could completely match the size, depth, and shape of diabetic wounds. Moreover, both the radially and vertically aligned nanofiber scaffolds could completely recover their shape and maintain structural integrity after repeated loads with compressive stresses. Furthermore, the BMSCs-laden 3D scaffolds are able to promote granulation tissue formation, angiogenesis, and collagen deposition, and switch the immune responses to the pro-regenerative direction. These 3D scaffolds consisting of radially or vertically aligned nanofibers in combination with BMSCs offer a robust, customizable platform potentially for a significant improvement of managing diabetic wounds.

Temperature/near-infrared light-responsive conductive hydrogels for controlled drug release and real-time monitoring

Stimuli-responsive hydrogels with adaptable physical properties show great potential in the biomedical field. In particular, the collection of electrical signals is essential for precision medicine. Here, a simple strategy is demonstrated for achieving controlled drug release and real-time monitoring using an interpenetrating binary network consisting of a graphene aerogel and a poly(N-isopropylacrylamide) hydrogel with incorporated polydopamine nanoparticles (PDA-NPs). Owing to the good physical properties of graphene and the embedded PDA-NPs, the hybrid hydrogel shows enhanced mechanical properties and good electrical conductivity. In addition, the hybrid hydrogel also shows dual thermo- and near-infrared light responsiveness, as revealed by the controlled release of a model drug. In addition, as the hydrogel exhibits detectable changes in resistance during drug release, the drug-release behavior of the hydrogel can be monitored in real time using electrical signals. Moreover, owing to the abundance of catechol groups on the PDA-NPs, the hybrid hydrogel shows good tissue adhesiveness, as demonstrated using in vivo experiments. Thus, the developed hybrid hydrogel exhibits considerable practical applicability for drug delivery and precision medicine.

Konjac glucomannan/polyvinyl alcohol nanofibers with enhanced skin healing properties by improving fibrinogen adsorption

Skin tissue engineering aims to develop the effective healing strategy to repair the wound by optimizing skin scaffold materials. During the skin wound healing process, fibrin plays an important role due to the specific blood coagulation effect. In this study, the outstanding fibrin capability of konjac glucomannan (KGM) is demonstrated by the molecular dynamics simulation and confirmed by the protein adsorption experiments. A series of konjac glucomannan/polyvinyl alcohol (KGM/PVA) composites with different ratio are fabricated and their role in enhancing the skin repair is tested by in vitro cell culture and in vivo study. The E_ads (adsorption energy) between fibrin and KGM is about 30% larger than that between fibrin and PVA. The fibrinogen adsorption rates of PVA and KGM/PVA (5:5) composites can reach about 20% and 60%, respectively. The results show the blood adsorption capacity of KGM/PVA (5:5) composite can reach about 13 g/g. After 7 days of cell culture, the optical density values of 3T3 fibroblasts on KGM/PVA (5:5) composite could reach 0.8. The mechanical properties of the composites are also verified to meet the practical needs. Thus, we propose a potential wound dressing material strategy based on the materials design and the intrinsic properties of KGM.

Molecular recognition with soft biomaterials

Biomacromolecules and engineered materials can achieve molecular recognition if they engage their ligand with properly oriented and chemically complementary moieties. Recently, there has been significant interest in fabricating recognitive soft materials, which possess specific affinity for biological analytes. We present a summary and evaluation of current recognitive materials for biosensing, drug delivery, and regenerative medicine applications. We highlight the impact of material composition on the extent and specificity of ligand adsorption, citing new theoretical and empirical evidence. We conclude with a guide for synthesizing and characterizing novel recognitive materials, as well as recommendations for ligand selection and experimental design.

Thermosensitive Hydrogel Delivery of Human Periodontal Stem Cells Overexpressing Platelet-Derived Growth Factor-BB Enhances Alveolar Bone Defect Repair

Alveolar bone defects can arise as a consequence of trauma, infection, periodontal disease, or congenital alveolar fenestration. Many approaches have been employed in an effort to treat or overcome such defects, but the ability to effectively achieve alveolar regeneration remains elusive. Platelet-derived growth factor-BB (PDGF-BB) has been shown to serve as a key factor capable of orchestrating cell proliferation, angiogenesis, and chemoattraction in the context of osteogenic processes. Exactly how PDGF-BB affects human periodontal ligament stem cells (hPDLSCs), however, requires further exploration. In this report, we utilized a lentiviral construct to achieve PDGF-BB overexpression in hPDLSCs, allowing us to establish that this gene was able to enhance the proliferation of these cells and to mediate osteogenic gene upregulation therein. In addition, we established a rat model of alveolar defects that were implanted using different complexes, and then monitored through histological and micro-CT analyses 4 and 8 weeks postsurgery to assess bone repair outcomes. These analyses revealed that a thermosensitive hydrogel was an effective 3D cell culture scaffold, while PDLSCs overexpressing PDGF-BB enhanced bone growth in the context of alveolar bone defects. Together, these results thus indicate that PDGF-BB represents a potent means of promoting stem cell-based alveolar bone tissue regeneration.

Biomimetic hydrogel for rapid and scar-free healing of skin wounds inspired by the healing process of oral mucosa

Inspired by the wound healing characteristics of the oral mucosa, a biomimetic hydrogel was prepared to realize the rapid and scar-free healing of skin wounds. Through monitoring the healing process of injured oral mucosa, we find out that the combination of high, rapid and sequential expression of some growth factors and the sterile-moist microenvironment are crucial for re-epithelialization and precise control of the inflammation process. On the base of our findings, a hydrogel loaded with several functional compounds was prepared to achieve a comprehensive simulation of the oral mucosal trauma microenvironment for skin wound healing. After 7 days treatment, the skin wound area of the treated group was only about 20% of that of the untreated group, and the proportion of collagen type III and type I in the treated group was much higher than that of the untreated group, suggesting lighter scar hyperplasia. The comprehensive treatment strategy of sequential expression of growth factors in combination with maintaining of a sterile and humid environment is expected to have great application prospect in the field of chronic trauma repair and cosmetic surgery. STATEMENT OF SIGNIFICANCE: Long healing time and scar hyperplasia during wound healing have been a serious problem in the past decades of wound healing research. Oral cavity wound healing occurs in an environment that sustains ongoing physical trauma and is rich in bacteria. Despite this, injuries to the mucosal surface often heal faster than cutaneous wounds and leave less noticeable scars. Therefore, in recent years, many scholars have begun to study the healing mechanism of oral mucosa, which supports a new inspiration for the study of skin wound repair: whether the injured skin can achieve a rapid scar-free healing effect similar to oral mucosa? Imitating the biological process of oral mucosa wound healing would be a promising therapeutic strategy in wound healing. Therefore, inspired by the wound healing characteristics of the oral mucosa, a biomimetic gel was prepared to realize the rapid and scar-free healing of skin wounds. Through monitoring the healing process of injured oral mucosa, the combination of high, rapid and sequential expression of some growth factors and sterile-moist microenvironment was crucial for re-epithelialization and precise control of the inflammation process. The comprehensive treatment strategy of sequential expression of growth factors in combination with maintance of a sterile and humid environment implies its potential use in the field of chronic trauma repair and cosmetic surgery.

Engineering a microcarrier based on a polysaccharide-growth factor complex for enhancing the proliferation of mesenchymal stem cells

Mesenchymal stem cell (MSC) delivery has been broadly investigated as a cell-based therapy strategy towards various diseases and tissue injury. In these applications, the cell-delivery vehicle plays a crucial role in determining the therapeutic performance of MSCs and their fate post-implantation. We report here the development of a microcarrier system combining platelet-derived growth factor-BB (PDGF-BB) and a PDGF-BB-binding polysaccharide - Eucommia ulmoides (EUP3) - for MSC cultivation. First, we investigated the optimal conditions to prepare the EUP3-PDGF-BB complex, by comparing its i) diameter, ii) morphology, and iii) bioactivity to promote MSC proliferation and fibroblast migration in vitro, under different PDGF-BB/EUP3 ratios. Then, we fabricated microspheres using gelatin and EUP3 as the matrix while stabilizing PDGF-BB at the optimal ratio for MSC adhesion and growth. Live staining and SEM observation indicated that the prepared microspheric carrier supported MSC growth and maintained cell stemness. We suggest that the EUP3/PDGF-gelatin microcarriers can potentially serve as a cell-delivery vehicle for tissue engineering.

Poly (lactic-co-glycolic acid)/graphene oxide composites combined with electrical stimulation in wound healing: preparation and characterization

PURPOSE

In this study, we fabricated multifunctional, electrically conductive composites by incorporating graphene oxide (GO) into a poly (lactic-co-glycolic acid) (PLGA) copolymer for wound repair. Furthermore, the resultant composites were coupled with electrical stimulation to further improve the therapeutic effect of wound repair.

METHODS

We evaluated the surface morphology of the composites, as well as their physical properties, cytotoxicity, and antibacterial activity, along with the combined effects of composites and electrical stimulation (ES) in a rat model of wound healing.

RESULTS

Application of the PLGA/GO composites to full-thickness wounds confirmed their advantageous biological properties, as evident from the observed improvements in wound-specific mechanical properties, biocompatibility, and antibacterial activity. Additionally, we found that the combination of composites and ES improved composite-mediated cell survival and accelerated wound healing in vivo by promoting neovascularization and the formation of type I collagen.

CONCLUSION

These results demonstrated that combined treatment with the PLGA/GO composite and ES promoted vascularization and epidermal remodeling and accelerated wound healing in rats, thereby suggesting the efficacy of PLGA/GO+ES for broad applications associated with wound repair.

Hydrogel-Based Strategies to Advance Therapies for Chronic Skin Wounds

Chronic skin wounds are the leading cause of nontraumatic foot amputations worldwide and present a significant risk of morbidity and mortality due to the lack of efficient therapies. The intrinsic characteristics of hydrogels allow them to benefit cutaneous healing essentially by supporting a moist environment. This property has long been explored in wound management to aid in autolytic debridement. However, chronic wounds require additional therapeutic features that can be provided by a combination of hydrogels with biochemical mediators or cells, promoting faster and better healing. We survey hydrogel-based approaches with potential to improve the healing of chronic wounds by reviewing their effects as observed in preclinical models. Topics covered include strategies to ablate infection and resolve inflammation, the delivery of bioactive agents to accelerate healing, and tissue engineering approaches for skin regeneration. The article concludes by considering the relevance of treating chronic skin wounds using hydrogel-based strategies.

Advanced drug delivery systems and artificial skin grafts for skin wound healing

Cutaneous injuries, especially chronic wounds, burns, and skin wound infection, require painstakingly long-term treatment with an immense financial burden to healthcare systems worldwide. However, clinical management of chronic wounds remains unsatisfactory in many cases. Various strategies including growth factor and gene delivery as well as cell therapy have been used to enhance the healing of non-healing wounds. Drug delivery systems across the nano, micro, and macroscales can extend half-life, improve bioavailability, optimize pharmacokinetics, and decrease dosing frequency of drugs and genes. Replacement of the damaged skin tissue with substitutes comprising cell-laden scaffold can also restore the barrier and regulatory functions of skin at the wound site. This review covers comprehensively the advanced treatment strategies to improve the quality of wound healing.

Engineered delivery strategies for enhanced control of growth factor activities in wound healing

Growth factors (GFs) are versatile signalling molecules that orchestrate the dynamic, multi-stage process of wound healing. Delivery of exogenous GFs to the wound milieu to mediate healing in an active, physiologically-relevant manner has shown great promise in laboratories; however, the inherent instability of GFs, accompanied with numerous safety, efficacy and cost concerns, has hindered the clinical success of GF delivery. In this article, we highlight that the key to overcoming these challenges is to enhance the control of the activities of GFs throughout the delivering process. We summarise the recent strategies based on biomaterials matrices and molecular engineering, which aim to improve the conditions of GFs for delivery (at the 'supply' end of the delivery), increase the stability and functions of GFs in extracellular matrix (in transportation to target cells), as well as enhance the GFs/receptor interaction on the cell membrane (at the 'destination' end of the delivery). Many of these investigations have led to encouraging outcomes in various in vitro and in vivo regenerative models with considerable translational potential.