In situ bioremediation of monoaromatic pollutants in groundwater: a review

Developing an institutional control framework for contaminated sites in China: An analytical case study

Institutional controls, as an important measure for risk management of contaminated sites, is widely used in site management by the United States, Canada and European countries. At present, some regions in China have also begun to explore the implementation of institutional controls, but its path, safeguard mechanism, and tracking evaluation are still unclear. Based on China's unique contaminated site remediation control system and land management system, this paper proposes a framework for the whole life cycle institutional controls of China's contaminated sites: (1) evaluate the need for institutional controls; (2) establish the objectives of institutional controls; (3) identify the restrictive requirements of institutional controls; (4) establish the implementation form of institutional controls; and (5) regularly review the effectiveness of institutional controls. To demonstrate the applicability of the institutional control framework, a case demonstration study was conducted at a petrochemical contaminated site in China. By analyzing the information on residual pollutants after the implementation of risk management measures at the site, the exposure pathways and hazards in case of re-release, and the engineering facilities, we proposed eight restrictive requirements, including the prohibition of disturbing and damaging the clean and planted soil layers of the site and the protection of long-term monitoring wells. At the same time, we constructed a multi-departmental pathway to implement institutional controls in conjunction with ecological environment, natural resources and housing departments to ensure effective implementation of institutional controls. Eventually, we summarized a set of replicable and generalizable institutional controls application models, which provide valuable theoretical and practical support for China and other local governments in the implementation of institutional controls at contaminated sites.

Genomics and taxonomy of the glyphosate-degrading, copper-tolerant rhizospheric bacterium Achromobacter insolitus LCu2

A rhizosphere strain, Achromobacter insolitus LCu2, was isolated from alfalfa (Medicago sativa L.) roots. It was able to degrade of 50% glyphosate as the sole phosphorus source, and was found resistant to 10 mM copper (II) chloride, and 5 mM glyphosate-copper complexes. Inoculation of alfalfa seedlings and potato microplants with strain LCu2 promoted plant growth by 30-50%. In inoculated plants, the toxicity of the glyphosate-copper complexes to alfalfa seedlings was decreased, as compared with the noninoculated controls. The genome of A. insolitus LCu2 consisted of one circular chromosome (6,428,890 bp) and encoded 5843 protein genes and 76 RNA genes. Polyphasic taxonomic analysis showed that A. insolitus LCu2 was closely related to A. insolitus DSM23807T on the basis of the average nucleotide identity of the genomes of 22 type strains and the multilocus sequence analysis. Genome analysis revealed genes putatively responsible for (1) plant growth promotion (osmolyte, siderophore, and 1-aminocyclopropane-1-carboxylate deaminase biosynthesis and auxin metabolism); (2) degradation of organophosphonates (glyphosate oxidoreductase and multiple phn clusters responsible for the transport, regulation and C-P lyase cleavage of phosphonates); and (3) tolerance to copper and other heavy metals, effected by the CopAB-CueO system, responsible for the oxidation of copper (I) in the periplasm, and by the efflux Cus system. The putative catabolic pathways involved in the breakdown of phosphonates are predicted. A. insolitus LCu2 is promising in the production of crops and the remediation of soils contaminated with organophosphonates and heavy metals.

Is redox zonation an appropriate method for determining the stage of natural remediation in deep contaminated groundwater?

Groundwater contamination resulting from petroleum development poses a significant threat to drinking water sources, especially in developing countries. In situ natural remediation methods, including microbiological processes, have gained popularity for the reduction of groundwater contaminants. However, assessing the stage of remediation in deep contaminated groundwater is challenging and costly due to the complexity of diverse geological conditions and unknown initial concentrations of contaminants. This research proposes that redox zonation may be a more convenient and comprehensive indicator than the concentration of contaminants for determining the stage of natural remediation in deep groundwater. The combination of sequencing microbial composition using the high-throughput 16S rRNA gene and function predicted by FAPROTAX is a useful approach to determining the redox conditions of different contaminated groundwater. The sulfate-reducing environment, represented by Desulfobacteraceae, Peptococcaceae, Desulfovibrionaceae, and Desulfohalobiaceae could be used as characteristic early stages of remediation for produced water contamination in wells with high concentrations of SO42-, benzene, and salinity. The nitrate-reducing environment, enriched with microorganisms related to denitrification, sulfur-oxidizing, and methanophilic microorganisms could be indicative of the mid stages of in situ bioremediation. The oxygen reduction environment, enriched with oligotrophic and pathogenic Sphingomonadaceae, Caulobacteraceae, Syntrophaceae, Legionellales, Moraxellaceae, and Coxiellaceae, could be indicative of the late stages of remediation. This comprehensive approach could provide valuable insights into the process of natural remediation and facilitate improved environmental management in areas of deep contaminated groundwater.

Microbial diversity and metabolic pathways linked to benzene degradation in petrochemical-polluted groundwater

The rapid advance in shotgun metagenome sequencing has enabled us to identify uncultivated functional microorganisms in polluted environments. While aerobic petrochemical-degrading pathways have been extensively studied, the anaerobic mechanisms remain less explored. Here, we conducted a study at a petrochemical-polluted groundwater site in Henan Province, Central China. A total of twelve groundwater monitoring wells were installed to collect groundwater samples. Benzene appeared to be the predominant pollutant, detected in 10 out of 12 samples, with concentrations ranging from 1.4 μg/L to 5,280 μg/L. Due to the low aquifer permeability, pollutant migration occurred slowly, resulting in relatively low benzene concentrations downstream within the heavily polluted area. Deep metagenome sequencing revealed Proteobacteria as the dominant phylum, accounting for over 63 % of total abundances. Microbial α-diversity was low in heavily polluted samples, with community compositions substantially differing from those in lightly polluted samples. dmpK encoding the phenol/toluene 2-monooxygenase was detected across all samples, while the dioxygenase bedC1 was not detected, suggesting that aerobic benzene degradation might occur through monooxygenation. Sequence assembly and binning yielded 350 high-quality metagenome-assembled genomes (MAGs), with 30 MAGs harboring functional genes associated with aerobic or anaerobic benzene degradation. About 80 % of MAGs harboring functional genes associated with anaerobic benzene degradation remained taxonomically unclassified at the genus level, suggesting that our current database coverage of anaerobic benzene-degrading microorganisms is very limited. Furthermore, two genes integral to anaerobic benzene metabolism, i.e, benzoyl-CoA reductase (bamB) and glutaryl-CoA dehydrogenase (acd), were not annotated by metagenome functional analyses but were identified within the MAGs, signifying the importance of integrating both contig-based and MAG-based approaches. Together, our efforts of functional annotation and metagenome binning generate a robust blueprint of microbial functional potentials in petrochemical-polluted groundwater, which is crucial for designing proficient bioremediation strategies.

Microbial remediation of petroleum-contaminated soil focused on the mechanism and microbial response: a review

The environmental pollution caused by petroleum hydrocarbons has received considerable attention in recent years. Microbial remediation has emerged as the preferred method for the degradation of petroleum hydrocarbons, which is experiencing rapid development driven by advancements in molecular biology. Herein, the capacity of different microorganisms used for crude oil bioremediation was reviewed. Moreover, factors influencing the effectiveness of microbial remediation were discussed. Microbial remediation methods, such as bioaugmentation, biostimulation, and bioventilation, are summarized in this review. Aerobic and anaerobic degradation mechanisms were reviewed to elucidate the metabolic pathways involved. The impacts of petroleum hydrocarbons on microorganisms and the environment were also revealed. A brief overview of synthetic biology and a unique perspective of technique combinations were presented to provide insight into research trends. The challenges and future outlook were also presented to stimulate contemplation of the mechanisms involved and the development of innovative techniques.

Biochar enhanced the stability of toluene removal in extracted groundwater amended with nitrate under microaerobic conditions

Groundwater pollution caused by the leakage of petroleum and various fuel oils is becoming a serious environmental problem. In this study, carbon-based materials including biochar and hydrochar were applied to investigate the effects of additives on the toluene removal in the extracted groundwater under microaerobic condition with the addition of nitrate. Biochar and hydrochar could adsorb toluene, and thus enhance the toluene removal in the system. The toluene removal efficiency was 8.2-8.9 mg/(g·h) at the beginning, and then decreased with time in the control and the hydrochar treatment, while it remained the stable values in the biochar treatment, owing to the fact that biochar could reduce the NO3--N loss by partial denitrification. Moreover, biochar could prompt the growth of toluene-degrading bacteria including Thauera, Rhodococcus, Ideonella and Denitratisoma, which had the capability of denitrification. However, hydrochar could stimulated the growth of denitrifiers without toluene-degrading capacity including Candidatus Competibacter and Ferrovibrio, which might play a key role in the partial denitrification of the system. The findings are helpful for developing remediation techniques of contaminated groundwater.

Microbial metabolism of caffeine and potential applications in bioremediation

With increasing global consumption of caffeine-rich products, such as coffee, tea, and energy drinks, there is also an increase in urban and processing waste full of residual caffeine with limited disposal options. This waste caffeine has been found to leach into the surrounding environment where it poses a threat to microorganisms, insects, small animals, and entire ecosystems. Growing interest in harnessing this environmental contaminant has led to the discovery of 79 bacterial strains, eight yeast strains, and 32 fungal strains capable of metabolizing caffeine by N-demethylation and/or C-8 oxidation. Recently observed promiscuity of caffeine-degrading enzymes in vivo has opened up the possibility of engineering bacterial strains capable of producing a wide variety of caffeine derivatives from a renewable resource. These engineered strains can be used to reduce the negative environmental impact of leached caffeine-rich waste through bioremediation efforts supplemented by our increasing understanding of new techniques such as cell immobilization. Here, we compile all of the known caffeine-degrading microbial strains, discuss their metabolism and related enzymology, and investigate their potential application in bioremediation.

Exploring fungal bioemulsifiers: insights into chemical composition, microbial sources, and cross-field applications

The demand for emulsion-based products is crucial for economic development and societal well-being, spanning diverse industries such as food, cosmetics, pharmaceuticals, and oil extraction. Formulating these products relies on emulsifiers, a distinct class of surfactants. However, many conventional emulsifiers are derived from petrochemicals or synthetic sources, posing potential environmental and human health risks. In this context, fungal bioemulsifiers emerge as a compelling and sustainable alternative, demonstrating superior performance, enhanced biodegradability, and safety for human consumption. From this perspective, the present work provides the first comprehensive review of fungal bioemulsifiers, categorizing them based on their chemical nature and microbial origin. This includes polysaccharides, proteins, glycoproteins, polymeric glycolipids, and carbohydrate-lipid-protein complexes. Examples of particular interest are scleroglucan, a polysaccharide produced by Sclerotium rolfsii, and mannoproteins present in the cell walls of various yeasts, including Saccharomyces cerevisiae. Furthermore, this study examines the feasibility of incorporating fungal bioemulsifiers in the food and oil industries and their potential role in bioremediation events for oil-polluted marine environments. Finally, this exploration encourages further research on fungal bioemulsifier bioprospecting, with far-reaching implications for advancing sustainable and eco-friendly practices across various industrial sectors.

Remediation of aniline-contaminated aquifer by combining in-well Rhizobium borbori and circulated groundwater electrolysis

Aniline has become a common groundwater contaminant due to its wide use as a raw material in agriculture and pharmaceutical products. The current technologies for in situ remediation of aniline in groundwater are limited by the strains deficient in bacterial species, limited oxygen supply, excessive waste gas load and cost. Accordingly, we conducted a laboratory sand tank experiment to remediate groundwater contaminated with aniline by combining circulated groundwater electrolysis and in-well Rhizobium borbori, which was isolated from activated sludge. The results of the experiment indicated that the optimum concentration of aniline for Rhizobium borbori is about 5 mg/L, beyond which the maximum cell density and the highest specific growth rate decreases as the aniline concentration increases. The optimized duration for immobilizing the Rhizobium borbori into the bioreactor is 4-5 days. Though the Rhizobium borbori was strongly inhibited by the high-concentration of aniline, the immobilized bioreactor in the 350 mg/L aniline solution successfully formed biofilm. The aniline volatilization had limited influence on the observation of bioremediation performance, and the combination of circulated groundwater and in-well Rhizobium borbori supplied a steady dose of oxygen to the bioreactor efficiently degrading the entire region between the injection and extraction well. In addition, a numerical model for the sand tank remediation experiment was used to estimate the yield coefficient of oxygen to be 0.484 g/g, which indicates the presence of ammonia nitrogen as by-products; accordingly, a smaller wellbore size as well a higher circulation flow rate and intensity of current are recommended to improve the water quality. Despite the positive outcomes and potential of the newly developed technology to degrade subsurface aniline, parallel experiments should be conducted to estimate the environmental risk of the by-products and explore the controlling mechanisms of each component in this comprehensive system.

High-performance diesel biodegradation using biogas digestate as microbial inoculum in lab-scale solid supported bioreactors

Industrial anaerobic digestion (AD) produces biogas and a digestate that is usually applied as a biofertilizer. However, the study and application of this by-product in terms of its rich microbial diversity and high metabolic activity have been barely investigated. In this work, the digestate regarded as an inoculum-without any further manipulation-was faced to a target hydrocarbon (i.e., diesel oil) to explore its biodegradation capability and potential application in bioaugmentation strategies. Lab-scale single batch bioreactors with solid support (i.e., sand or gravel) embedded with the inoculum and diesel were used to improve bioaccessibility and biofilm formation. In addition, different experimental conditions were assayed varying the initial diesel concentration, microbial load, type of solid support, inoculum aging time, and presence or absence of oxygen. Remaining diesel concentration, dehydrogenase activity and microbial community structure were periodically determined. Remarkably, this low-cost consortium was capable of a significant reduction (>90%) in the concentration of diesel, within 14 days and when the initial load was as high as 6950 mg/kg dry solid support. Furthermore, a 10-fold increment in dehydrogenase activity, alongside an increase in the abundance of hydrocarbon-degrading bacterial groups, and the enrichment of genes for alkane monooxygenase and aromatic ring-hydroxylating dioxygenases, encourage further study of this consortium for bioremediation purposes.

An overview of in situ remediation for groundwater co-contaminated with heavy metals and petroleum hydrocarbons

Groundwater is an important component of water resources. Mixed pollutants comprising heavy metals (HMs) and petroleum hydrocarbons (PHs) from industrial activities can contaminate groundwater through such processes as rainfall infiltration, runoff and discharge, which pose direct threats to human health through the food chain or drinking water. In situ remediation of contaminated groundwater is an important way to improve the quality of a water environment, develop water resources and ensure the safety of drinking water. Bioremediation and permeable reactive barriers (PRBs) were discussed in this paper as they were effective and affordable for in situ remediation of complex contaminated groundwater. In addition, media types, technology combinations and factors for the PRBs were highlighted. Finally, insights and outlooks were presented for in situ remediation technologies for complex groundwater contaminated with HMs and PHs. The selection of an in situ remediation technology should be site specific. The remediation of complex contaminated groundwater can be approached from various perspectives, including the development of economical materials, the production of slow-release and encapsulated materials, and a combination of multiple technologies. This review is expected to provide technical guidance and assistance for in situ remediation of complex contaminated groundwater.

Influence of static pressure on toluene oxidation efficiency in groundwater by micro-nano bubble ozonation

Micro-nano bubble ozonation has been widely applied in the purification of drinking water due to its superior characteristics such as high mass transfer rate and long resistance time. However, its application in groundwater remediation is limited, partially due to the unclear effect of static water pressure on the oxidation efficiency. This study constructed a batch reactor to investigate the influence of static pressure on toluene oxidation by ozone micro-nano bubble water. To achieve constant pressure, weight was added above the mobile reactor roof, and the initial concentrations of toluene and dissolved ozone were 1.00 mg L-1 and 0.68 mg L-1 respectively. Experimental results demonstrated that as the static water pressure increased from 0.0 to 2.5 m, the average microbubble diameter decreased significantly from 62.3 to 36.0 μm. Simultaneously, the oxidation percentage of toluene increased from 40.3% to 58.7%, and the reaction rate between toluene and hydroxyl radical (OH·) increased from 9.3 × 109 to 1.39 × 1010 M-1 s-1, indicating that the shrinkage of micro-nano bubbles generated an abundance of OH· that quickly oxidized toluene adsorbed at the bubble interface. A greater enhancement of oxidation efficiency for nitrobenzene, as compared to p-xylene, was observed after the addition of 2.5 m water pressure, which verified the larger contribution of OH· under static pressure. Although the improvement of oxidation efficiency was reduced under acid and alkaline environments, as well as in practical groundwater matrices, the overall results still demonstrated the promising application of micro-nano bubble ozonation in groundwater remediation.

Influence of growth substrate and contaminant mixtures on the degradation of BTEX and MTBE by Rhodococcus rhodochrous ATCC strain 21198

The degradation of the prevalent environmental contaminants benzene, toluene, ethylbenzene, and xylenes (BTEX) along with a common co-contaminant methyl tert-butyl ether (MTBE) by Rhodococcus rhodochrous ATCC Strain 21198 was investigated. The ability of 21198 to degrade these contaminants individually and in mixtures was evaluated with resting cells grown on isobutane, 1-butanol, and 2-butanol. Growth of 21198 in the presence of BTEX and MTBE was also studied to determine the growth substrate that best supports simultaneous microbial growth and contaminants degradation. Cells grown on isobutane, 1-butanol, and 2-butanol were all capable of degrading the contaminants, with isobutane grown cells exhibiting the most rapid degradation rates and 1-butanol grown cells exhibiting the slowest. However, in conditions where BTEX and MTBE were present during microbial growth, 1-butanol was determined to be an effective substrate for supporting concurrent growth and contaminant degradation. Contaminant degradation was found to be a combination of metabolic and cometabolic processes. Evidence for growth of 21198 on benzene and toluene is presented along with a possible transformation pathway. MTBE was cometabolically transformed to tertiary butyl alcohol, which was also observed to be transformed by 21198. This work demonstrates the possible utility of primary and secondary alcohols to support biodegradation of monoaromatic hydrocarbons and MTBE. Furthermore, the utility of 21198 for bioremediation applications has been expanded to include BTEX and MTBE.

Toluene-driven anaerobic biodegradation of chloroform in a continuous-flow bioelectrochemical reactor

Subsurface co-contamination by multiple pollutants can be challenging for the design of bioremediation strategies since it may require promoting different and often antagonistic degradation pathways. Here, we investigated the simultaneous degradation of toluene and chloroform (CF) in a continuous-flow anaerobic bioelectrochemical reactor. As a result, 47 μmol L-1 d-1 of toluene and 60 μmol L-1 d-1 of CF were concurrently removed, when the anode was polarized at +0.4 V vs. Standard Hydrogen Electrode (SHE). Analysis of the microbial community structure and key functional genes allowed to identify the involved degradation pathways. Interestingly, when acetate was supplied along with toluene, to simulate the impact of a readily biodegradable substrate on process performance, toluene degradation was adversely affected, likely due to competitive inhibition effects. Overall, this study proved the efficacy of the developed bioelectrochemical system in simultaneously treating multiple groundwater contaminants, paving the way for the application in real-world scenarios.

Characterizations of highly efficient moderately halophilic toluene degrading exiguobacterium mexicanum M7 strain isolated from Egyptian saline sediments

Toluene and other monoaromatic compounds are released into the environment particularly saline habitats due to the inappropriate disposal methods of petroleum products. Studying the bio-removal strategy is required to clean up these hazardous hydrocarbons that threaten all ecosystem life using halophilic bacteria with higher biodegradation efficiency of monoaromatic compounds as a sole carbon and energy source. Therefore, sixteen pure halophilic bacterial isolates were obtained from saline soil of Wadi An Natrun, Egypt, which have the ability to degrade toluene and consume it as the only source of carbon and energy. Amongst these isolates, isolate M7 exhibited the best growth with considerable properties. This isolate was selected as the most potent strain and identified based on phenotypic and genotypic characterizations. The strain M7 was belonging to Exiguobacterium genus and founded to be closely matched to the Exiguobacterium mexicanum with a similarity of 99%. Using toluene as sole carbon source, strain M7 showed good growth at a wide range temperature degree (20-40ºC), pH (5-9), and salt concentrations (2.5-10%, w/v) with optimal growth conditions at 35ºC, pH 8, and 5%, respectively. The biodegradation ratio of toluene was estimated at above optimal conditions and analyzed using Purge-Trap GC-MS. The results showed that strain M7 has the potentiality to degraded 88.32% of toluene within greatly short time (48 h). The current study findings support the potential ability to use strain M7 as a biotechnological tool in many applications such as effluent treatment and toluene waste management.

Nutrient recovery and pollutant removal during renewable fuel production: opportunities and challenges

Stimulated by the desire to achieve a Net Zero energy economy, the demand for renewable fuels is growing rapidly. The production of toxic waste streams that accompanies the transition from fossil fuels to renewable fuels is often overlooked. These waste streams include, among others, thiols and ammonia, and benzene, toluene, and xylene (BTX). When suitable treatment technologies are available, these compounds can be converted to valuable nutrients. In this opinion article, we provide an overview of expected waste streams and their characteristics. We indicate future challenges for associated waste streams, such as the lag in developing resource recovery technologies. Furthermore, we discuss unexploited opportunities to recover valuable nutrients from these waste streams.

Toxicity prediction: An application of alternative testing and computational toxicology in contaminated groundwater sites in Taiwan

Groundwater contamination remains a global threat due to its toxic effects to humans and the environment. The remediation of contaminated groundwater sites can be costly, thus, identifying the priority areas of concern is important to reduce money spent on resources. In this study, we aimed to identify and rank the priority groundwater sites in a contaminated petrochemical district by combining alternative, non-animal approaches - chemical analysis, cell-based high throughput screening (HTS), and Toxicological Priority Index (ToxPi) computational toxicology tool. Groundwater samples collected from ten different sites in a contaminated district showed pollutant levels below the detection limit, however, hepatotoxic bioactivity was demonstrated in human hepatoma HepaRG cells. Integrating the pollutants information (i.e., pollutant characteristics and concentration data) with the bioactivity data of the groundwater samples, an evidence-based ranking of the groundwater sites for future remediation was established using ToxPi analysis. The currently presented combinatorial approach of screening groundwater sites for remediation purposes can further be refined by including relevant parameters, which can boost the utility of this approach for groundwater screening and future remediation.

A hybrid technique for sulfamethoxazole (SFM) removal using Enterobacter hormaechei HaG-7: Bio-electrokinetic degradation, pathway and toxicity

Prolonged exposure to antibiotics would likely favor the development of antibiotic resistance and their gene transfer among bacterial communities that are responsible for enriched antibiotic resistant microbes. Sulfamethoxazole (SFM) is a commonly used antibiotic that is released into the environment through human and animal wastes. Improper degradation of SFM poses severe threats to mankind and all life forms. The present study aims in analyzing the process and the probability of utilizing bio-electrokinetic degradation for elimination of SFM from artificially contaminated soil employing Enterobacter hormaechei HaG-7. The desired optimal conditions for SFM degradation (∼98%) were observed at SFM initial concentration (100 mg/L) with an inoculum dose (1% v/v) and applied potential voltage (1.5 V) at pH (7). The results indicated efficient and complete degradation of SFM when compared with the conventional biodegradation.

Microbial cell wall sorption and Fe-Mn binding in rhizosphere contribute to the obstruction of cadmium from soil to rice

Screening high-tolerant microorganisms to cadmium (Cd) and revealing their bio-obstruction mechanism could be significant for Cd regulation from farmland to the food chain. We examined the tolerance and bio-removal efficiency of Cd ions of two bacterial strains, Pseudomonas putida 23483 and Bacillus sp. GY16, and measured the accumulation of Cd ions in rice tissues and its different chemical forms in soil. The results showed that the two strains had high tolerance to Cd, but the removal efficiency was decreased successively with increasing Cd concentrations (0.05 to 5 mg kg^-1). Cell-sorption accounted for the major proportion of Cd removal compared with excreta binding in both strains, which was conformed to the pseudo-second-order kinetics. At the subcellular level, Cd was mostly taken up by the cell mantle and cell wall, and only a small amount entered into the cytomembrane and cytoplasmic with time progressed (0 to 24 h) in each concentration. The cell mantle and cell wall sorption decreased with increasing Cd concentration, especially in the cytomembrane and cytoplasmic. The scanning electron microscope (SEM) and energy dispersive X-ray (EDS) analysis verified that Cd ions were attached to the cell surface, and the functional groups of C-H, C-N, C=O, N-H, and O-H in the cell surface may participate in cell-sorption process tested by the FTIR analysis. Furthermore, inoculation of the two strains significantly decreased Cd accumulation in rice straw and grain but increased in the root, increased Cd enrichment ratio in root from soil, decreased Cd translocation ratio from root to straw and grain, and increased the Cd concentrations of Fe-Mn binding form and residual form in rhizosphere soil. This study highlights that the two strains mainly removed Cd ions in solution through biosorption and passivated soil Cd as Fe-Mn combined form ascribe to its characteristics of manganese-oxidizing, eventually achieving bio-obstruction of Cd from soil to rice grain.

Insights into the syntrophic microbial electrochemical oxidation of toluene: a combined chemical, electrochemical, taxonomical, functional gene-based, and metaproteomic approach

Biodegradation of aromatic hydrocarbons in anoxic contaminated environments is typically limited by the lack of bioavailable electron acceptors. Microbial electrochemical technologies (METs) are able to provide a virtually inexhaustible electron acceptor in the form of a solid electrode. Recently, we provided first experimental evidence for the syntrophic degradation of toluene in a continuous-flow bioelectrochemical reactor known as the "bioelectric well". Herein, we further analyzed the structure and function of the electroactive toluene-degrading microbiome using a suite of chemical, electrochemical, phylogenetic, proteomic, and functional gene-based analyses. The bioelectric well removed 83 ± 7 % of the toluene from the influent with a coulombic efficiency of 84 %. Cyclic voltammetry allowed to identify the formal potentials of four putative electron transfer sites, which ranged from -0.2 V to +0.1 V vs. SHE, consistent with outer membrane c-type cytochromes and pili of electroactive Geobacter species. The biofilm colonizing the surface of the anode was indeed highly enriched in Geobacter species. On the other hand, the planktonic communities thriving in the bulk of the reactor harbored aromatic hydrocarbons degraders and fermentative propionate-producing microorganisms, as revealed by phylogenetic and proteomic analyses. Most likely, propionate, acetate or other VFAs produced in the bulk liquid from the degradation of toluene were utilized as substrates by the electroactive biofilm. Interestingly, key-functional genes related to the degradation of toluene were found both in the biofilm and in the planktonic communities. Taken as a whole, the herein reported results highlight the importance of applying a comprehensive suite of techniques to unravel the complex cooperative metabolisms occurring in METs.

Applications of Probiotic-Based Multi-Components to Human, Animal and Ecosystem Health: Concepts, Methodologies, and Action Mechanisms

Probiotics and related preparations, including synbiotics and postbiotics, are living and non-living microbial-based multi-components, which are now among the most popular bioactive agents. Such interests mainly arise from the wide range and numerous beneficial effects of their use for various hosts. The current minireview article attempts to provide an overview and discuss in a holistic way the concepts, methodologies, action mechanisms, and applications of probiotic-based multi-components in human, animal, plant, soil, and environment health. Probiotic-based multi-component preparations refer to a mixture of bioactive agents, containing probiotics or postbiotics as main functional ingredients, and prebiotics, protectants, stabilizers, encapsulating agents, and other compounds as additional constituents. Analyzing, characterizing, and monitoring over time the traceability, performance, and stability of such multi-component ingredients require relevant and sensitive analytical tools and methodologies. Two innovative profiling and monitoring methods, the thermophysical fingerprinting thermogravimetry-differential scanning calorimetry technique (TGA-DSC) of the whole multi-component powder preparations, and the Advanced Testing for Genetic Composition (ATGC) strain analysis up to the subspecies level, are presented, illustrated, and discussed in this review to respond to those requirements. Finally, the paper deals with some selected applications of probiotic-based multi-components to human, animal, plant, soil and environment health, while mentioning their possible action mechanisms.

Assessing the Biodegradation of BTEX and Stress Response in a Bio-Permeable Reactive Barrier Using Compound-Specific Isotope Analysis

By using compound-specific isotope analysis (CSIA) in combination with high-throughput sequencing analysis (HTS), we successfully evaluated the benzene and toluene biodegradation in a bio-permeable reactive barrier (bio-PRB) and the stress response of the microbial community. Under stress conditions, a greater decline in the biodegradation rate of BTEX was observed compared with the apparent removal rate. Both an increase in the influent concentration and the addition of trichloroethylene (TCE) inhibited benzene biodegradation, while toluene biodegradation was inhibited by TCE. Regarding the stress response, the relative abundance of the dominant bacterial community responsible for the biodegradation of BTEX increased with the influent concentration. However, the dominant bacterial community did not change, and its relative abundance was restored after the influent concentration decreased. On the contrary, the addition of TCE significantly changed the bacterial community, with Aminicenantes becoming the dominant phyla for co-metabolizing TCE and BTEX. Thus, TCE had a more significant influence on the bio-PRB than an increasing influent concentration, although these two stress conditions showed a similar degree of influence on the apparent removal rate of benzene and toluene. The present work not only provides a new method for accurately evaluating the biodegradation performance and microbial community in a bio-PRB, but also expands the application of compound-specific isotope analysis in the biological treatment of wastewater.

Screening of Plants and Indigenous Bacteria to Improve Arsenic Phytoextraction

Arsenic (As) is one of the most common inorganic pollutants; unfortunately, it is also one of the most toxic and is therefore a cause of great concern for the health risks that could result from it. Removing arsenic from the soil using phytoremediation approaches is an effective strategy, and several studies demonstrate the ability of Cannabis sativa (TSN 19109, hemp) to tolerate this harmful contaminant. The aim of this work was to identify the best experimental conditions for a phytoremediation plan to be applied in a disused area located in Sicily (Italy) and contaminated by As, comparing Cannabis sativa with Brassica juncea (TSN 23059) and Zea mays (TSN 42269, corn). To assist the process, several chelating agents were tested to improve arsenic mobility, and two different sets of arsenic-tolerant bacteria were isolated from the rhizospheric soil of indigenous herbaceous species and used to promote plant growth, leading to a significant improvement in terms of biomass produced and phytoextraction. After the combined treatment, the arsenic content in the aerial part of the plants increased by more than two orders of magnitude (e.g., from 0.05 to 6.57 mg kg−1, from 0.04 to 6.69 mg kg−1, and from 0.03 to 5.57 mg kg−1 for brassica, corn, and hemp, respectively), confirming the marked increase in the total absorption of As by plants.

Bacterial diversity and competitors for degradation of hazardous oil refining waste under selective pressures of temperature and oxygen

Oil refining waste (ORW) contains complex, hazardous, and refractory components, causing more severe long-term environmental pollution than petroleum. Here, ORW was used to simulate the accelerated domestication of bacteria from oily sludges and polymer-flooding wastewater, and the effects of key factors, oxygen and temperature, on the ORW degradation were evaluated. Bacterial communities acclimated respectively in 30/60 °C, aerobic/anaerobic conditions showed differentiated degradation rates of ORW, ranging from 5% to 34%. High-throughput amplicon sequencing and ORW component analysis revealed significant correlation between bacterial diversity/biomass and degradation efficiency/substrate preference. Under mesophilic and oxygen-rich condition, the high biomass and abundant biodiversity with diverse genes and pathways for petroleum hydrocarbons degradation, effectively promoted the rapid and multi-component degradation of ORW. While under harsh conditions, a few dominant genera still contributed to ORW degradation, although the biodiversity was severely restricted. The typical dominant facultative anaerobes Bacillus (up to 99.8% abundance anaerobically) and Geobacillus (up to 99.9% abundance aerobically and anaerobically) showed oxygen-independent sustainable degradation ability and broad-spectrum of temperature adaptability, making them promising and competitive bioremediation candidates for future application. Our findings provide important strategies for practical bioremediation of varied environments polluted by hazardous ORW.

Typical groundwater contamination in the vicinity of industrial brownfields and basic methods of their treatment

The article deals with simple methods of decontamination of groundwater from the vicinity of brownfields contaminated with organic and inorganic substances. In the literature, thousands of articles on this issue at various sophisticated levels of knowledge can be found. The articles are mostly suitable as an extension of scientific knowledge; however, regarding potential costs and respectively scale-up problems, the applications are limited. It turns out that the vast majority of contaminated water can be effectively decontaminated by simple methods, in a coagulation-sedimentation sequence → simple oxidation and reduction methods for separated water (Fenton reaction, photocatalysis, ozonation, reductive dehalogenation with zero metals) → adsorption of remaining pollutants on simple sorbents, eg on biochar → (possibly bioremediation or advanced physical methods such as membrane filtration) → final purification on activated carbon. Due to the usually limited volume loads of soils with pollutants in the vicinity of brownfields, it is not economically advantageous to build demanding decontamination units for water purification. Usually, the simplest solution is the system to pump-and-treat around the source of contamination, with the main emphasis on highly effective removal of pollutants from water that returns underground. Groundwater was taken from boreholes leading to the saturated zone in the vicinity of several selected industrial brownfields. The solutions are shown on individual typical cases.

Bioaugmentation as a green technology for hydrocarbon pollution remediation. Problems and prospects

Environmental pollution mitigation measure involving bioremediation technology is a sustainable intervention for a greener ecosystem biorecovery, especially the obnoxious hydrocarbons, xenobiotics, and other environmental pollutants induced by anthropogenic stressors. Several successful case studies have provided evidence to this paradigm including the putative adoption that the technology is eco-friendly, cost-effective, and shows a high tendency for total contaminants mineralization into innocuous bye-products. The present review reports advances in bioremediation, types, and strategies conventionally adopted in contaminant clean-up. It identified that natural attenuation and biostimulation are faced with notable limitations including the poor remedial outcome under the natural attenuation system and the residual contamination occasion following a biostimulation operation. It remarks that the use of genetically engineered microorganisms shows a potentially promising insight as a prudent remedial approach but is currently challenged by few ethical restrictions and the rural unavailability of the technology. It underscores that bioaugmentation, particularly the use of high cell density assemblages referred to as microbial consortia possess promising remedial prospects thus offers a more sustainable environmental security. The authors, therefore, recommend bioaugmentation for large scale contaminated sites in regions where environmental degradation is commonplace.

Development of a bacterial consortium from Variovorax paradoxus and Pseudomonas veronii isolates applicable in the removal of BTEX

In this study, we report on the development of a novel bacterial consortium, consisting of Variovorax paradoxus and Pseudomonas veronii isolates, applicable in the biodegradation of all six BTEX compounds (benzene, toluene, ethylbenzene, o-, m- and p-xylene) and the bioremediation of contaminated sites. The co-cultivability of the selected bacterial isolates was determined in nutrient-rich medium, as well as in BTEX amended mineral salts solution using Terminal Restriction Fragment Length Polymorphism (T-RFLP) and CFU determinations. BTEX biodegradation capacity of the two-strain consortium was assessed in mineral salts solution, where a series of BTEX depletions and supplementations occurred, as well as in a real, BTEX polluted environmental sample (contaminated groundwater) in the presence of the autochthonous bacterial community. The obtained results indicated that the developed bacterial consortium is very efficient in BTEX biodegradation. Under laboratory conditions, the acclimatized bacterial consortium completely degraded the BTEX mixture with a concentration as high as 20 mg l^-1 in a mineral salt medium within a short span of 6 h. Close to in situ groundwater conditions (incubated at 15 °C under static conditions in the absence of light), groundwater microcosms containing the autochthonous bacterial community inoculated with the developed bacterial consortium showed more efficient toluene, o-, m-and p-xylene biodegradation capacity than microcosms containing solely the native microbial population originally found in the groundwater. In the inoculated microcosms, after 115 h of incubation the concentration (~ 1.7 mg l^-1 each) of o-, m- and p-xylene decreased to zero, whereas in the non-inoculated microcosms the concentration of xylene isomers was still 0.2, 0.3 and 0.3 mg l^-1, respectively. The allochthonous bioaugmentation of the contaminated groundwater with the obtained inoculant was successful and manifested in a better BTEX degradation rate. Our results suggest that the obtained bacterial consortium can be a new, stable and efficient bioremediation agent applicable in the synergistic elimination of BTEX compounds from contaminated sites.

K-strategy species plays a pivotal role in the natural attenuation of petroleum hydrocarbon pollution in aquifers

The natural attenuation of petroleum hydrocarbons is inseparable from the action of microorganisms, while the degradation methods and ecological strategies of microorganisms in petroleum-contaminated aquifers are still under debate. In the present study, 16 S rRNA sequencing and quantitative real-time polymerase chain reaction were used to assess the potential microbial degradation of petroleum hydrocarbons, and the ecological strategy of microorganisms under petroleum stress was analyzed through a co-occurrence network. The results showed that the microbial community in sediments exhibit higher efficiency and stability and stronger ecological function than that in groundwater. Keystone species coordinated with the community to execute ecosystem processes and tended to choose a K-strategy to survive, with the aquifer sediment being the main site of petroleum hydrocarbon degradation. Under natural conditions, the presence of petroleum hydrocarbons at concentrations higher than 126 μg kg^-1 and 5557 μg kg^-1 was not conducive to the microbial degradation of polycyclic aromatic hydrocarbons and alkanes, respectively. These results can be used as a reference for an enhanced bioremediation of contaminated groundwater. Overall, these findings provide support to managers for developing environmental management strategies.

Enhanced Lead Phytoextraction by Endophytes from Indigenous Plants

Lead (Pb) is one of the most common metal pollutants in soil, and phytoextraction is a sustainable and cost-effective way to remove it. The purpose of this work was to develop a phytoextraction strategy able to efficiently remove Pb from the soil of a decommissioned fuel depot located in Italy by the combined use of EDTA and endophytic bacteria isolated from indigenous plants. A total of 12 endophytic strains from three native species (Lotus cornicolatus, Sonchus tenerrimus, Bromus sterilis) were isolated and selected to prepare a microbial consortium used to inoculate microcosms of Brassica juncea and Helianthus annuus. As for B. juncea, experimental data showed that treatment with microbial inoculum alone was the most effective in improving Pb phytoextraction in shoots (up to 25 times more than the control). In H. annuus, on the other hand, the most effective treatment was the combined treatment (EDTA and inoculum) with up to three times more Pb uptake values. These results, also validated by the metagenomic analysis, confirm that plant-microbe interaction is a crucial key point in phytoremediation.

Construction of biotreatment platforms for aromatic hydrocarbons and their future perspectives

Aromatic hydrocarbons (AHCs) are one of the major environmental pollutants introduced from both natural and anthropogenic sources. Many AHCs are well known for their toxic, carcinogenic, and mutagenic impact on human health and ecological systems. Biodegradation is an eco-friendly and cost-effective option as microorganisms (e.g., bacteria, fungi, and algae) can efficiently breakdown or transform such pollutants into less harmful and simple metabolites (e.g., carbon dioxide (aerobic), methane (anaerobic), water, and inorganic salts). This paper is organized to offer a state-of-the-art review on the biodegradation of AHCs (monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs)) and associated mechanisms. The recent progress in biological treatment using suspended and attached growth bioreactors for the biodegradation of AHCs is also discussed. In addition, various substrate growth and inhibition models are introduced along with the key factors governing their biodegradation kinetics. The growth and inhibition models have helped gain a better understanding of substrate inhibition in biodegradation. Techno-economic analysis (TEA) and life cycle assessment (LCA) aspects are also described to assess the technical, economical, and environmental impacts of the biological treatment system.

Release characteristics of Pb and BETX from in situ oil shale transformation on groundwater environment

Oil shale has received attention as an alternative energy source to petroleum because of its abundant reserves. Exploitation of oil shale can be divided into two types: ex situ and in situ exploitation. In situ transformation has been favoured because of its various advantages. Heating of oil shale leads to the production of oil and gas. To explore the influence of solid residue after pyrolysis of oil shale on the groundwater environment, we performed ultrapure water-rock interaction experiments. The results showed that Pb tended to accumulate in solid residues during pyrolysis. Additionally, the Pb concentration goes up in the immersion solution over time and as the pyrolysis temperature increased. In contrast, when we measured the soaking data of benzene series, the concentrations of benzene and toluene produced at temperatures over 350 ℃ were highest in the four oil shale pyrolysis samples after pyrolysis. The water-rock interaction experiment for 30 days led to benzene and toluene concentrations that were 104 and 1070-fold over the limit of China's standards for groundwater quality. Over time, the content of benzene series was attenuated via biological actions. The results show that in situ oil shale mining can lead to continuous pollution in the groundwater environment.

Surfactant efficiency on pentachlorophenol-contaminated wastewater enhanced by Pseudomonas putida AJ 785569

This study aims to evaluate the effect of three surfactants on the removal of PCP (800 mg L^-1) from Secondary Treated Wastewater (STWW) by Pseudomonas putida AJ 785569. The effect of surfactants [sodium lauryl sulfate (SDS) as anionic, Tween 80 (TW80) as non-anionic and cetyltrimethylammonium bromide (CTAB) as cationic] is tested about the three following aspects: (1) bacterial growth, (2) bacterial biofilm formation or development and (3) PCP rate removal. The results showed that strain P. putida AJ 785569 could adsorb around 30 mg L^-1 and remove 600 mg L^-1 of PCP within 168 h of incubation. The SDS developed the growth of bacteria and the removal of PCP. This PCP removal in mineral salt medium (MSM) is around 760 mg L^-1 (95% degradation) higher than the ones registered with CTAB and TW80 with a value 506.75 (63% degradation) and 364.1 mg L^-1 (45% degradation), respectively. The obtained results of chloride concentration showed an important relation with PCP removal during incubation with an important value. Monitoring the development of bacterial biofilm, in MSM medium added with PCP (100 mg L^-1) by strain P. putida AJ 785569, showed a significant increase in the optical density value from 0.9 to 4 at λ = 595 nm, a modification of strain P. putida AJ 785569's morphotype, density and color colonies.

Anaerobic Benzene Biodegradation Linked to the Growth of Highly Specific Bacterial Clades

Reliance on bioremediation to remove benzene from anoxic environments has proven risky for decades but for unknown reasons. Research has revealed a strong link between anaerobic benzene biodegradation and the enrichment of highly specific microbes, including Thermincola in the family Peptococcaceae and the deltaproteobacterial Candidate Sva0485 clade. Using aquifer materials from Canadian Forces Base Borden, we compared five bioremediation approaches in batch microcosms. Under conditions simulating natural attenuation or sulfate biostimulation, benzene was not degraded after 1-2 years of incubation and no enrichment of known benzene-degrading microbes occurred. In contrast, nitrate-amended microcosms reported benzene biodegradation coincident with significant growth of Thermincola spp., along with a functional gene presumed to catalyze anaerobic benzene carboxylation (abcA). Inoculation with 2.5% of a methanogenic benzene-degrading consortium containing Sva0485 (Deltaproteobacteria ORM2) resulted in benzene biodegradation in the presence of sulfate or under methanogenic conditions. The presence of other hydrocarbon co-contaminants decreased the rates of benzene degradation by a factor of 2 to 4. Tracking the abundance of the abcA gene and 16S rRNA genes specific for benzene-degrading Thermincola and Sva0485 is recommended to monitor benzene bioremediation in anoxic groundwater systems to further uncover growth-rate-limiting conditions for these two intriguing phylotypes.

Effect of biostimulation and bioaugmentation on hydrocarbon degradation and detoxification of diesel-contaminated soil: a microcosm study

Soil contamination with diesel oil is quite common during processes of transport and storage. Bioremediation is considered a safe, economical, and environmentally friendly approach for contaminated soil treatment. In this context, studies using hydrocarbon bioremediation have focused on total petroleum hydrocarbon (TPH) analysis to assess process effectiveness, while ecotoxicity has been neglected. Thus, this study aimed to select a microbial consortium capable of detoxifying diesel oil and apply this consortium to the bioremediation of soil contaminated with this environmental pollutant through different bioremediation approaches. Gas chromatography (GC-FID) was used to analyze diesel oil degradation, while ecotoxicological bioassays with the bioindicators Artemia sp., Aliivibrio fischeri (Microtox), and Cucumis sativus were used to assess detoxification. After 90 days of bioremediation, we found that the biostimulation and biostimulation/bioaugmentation approaches showed higher rates of diesel oil degradation in relation to natural attenuation (41.9 and 26.7%, respectively). Phytotoxicity increased in the biostimulation and biostimulation/bioaugmentation treatments during the degradation process, whereas in the Microtox test, the toxicity was the same in these treatments as that in the natural attenuation treatment. In both the phytotoxicity and Microtox tests, bioaugmentation treatment showed lower toxicity. However, compared with natural attenuation, this approach did not show satisfactory hydrocarbon degradation. Based on the microcosm experiments results, we conclude that a broader analysis of the success of bioremediation requires the performance of toxicity bioassays.

Exploring the spatial-temporal variations and policy-based driving force behind groundwater contamination and remediation research in past decades

Groundwater has been recognized as one of the most critical and vulnerable natural sources which is utilized in potable water supply, agricultural irrigation, and industrial manufacture worldwide. In past decades, groundwater issues have drawn more and more attention and enable groundwater contamination and remediation research achieve dramatic development. This study depicted the spatial-temporal evolution of groundwater contamination and remediation research by evaluating related literatures published from 1989 to 2017 based on databases of Science Citation Index, Social Science Citation Index, Conference Proceedings Citation Index-Sci, and Conference Proceedings Citation Index-Social Science and Humanities with Bibliometric Analysis and explored the policy-based driving force with laws and regulations collected from United States Code (U.S. Code) system and Code of Federal Regulations (CFR) system behind those variations. The results demonstrated a rapid growth of groundwater contamination and remediation-related publications, and the USA identified as the leading country in terms of contributing the largest number of articles and possessing the greatest influence. From the temporal view, scholars from different countries have made in-depth studies in the fields of groundwater, pollutants and groundwater quality, remediation materials, and remediation approaches. The spatial analysis demonstrated America and Asia are the two continents that have published the most articles. In the past decades, the evolutionary progress of groundwater research is demonstrated that the hot spots are developed from groundwater contamination and remediation to more specific researches. Simultaneously, laws and regulations about groundwater are developed as well and to some extent, those laws and regulations boost the development of groundwater contamination and remediation research publications. These findings, as important references, could be utilized to depict the evolutionary progress of groundwater contamination and remediation research and explore the directions and trends of this specific research field in the future.

Benzene degradation in contaminated aquifers: Enhancing natural attenuation by injecting nitrate

Natural attenuation processes depend on the availability of suitable electron acceptors. At the megasite Zeitz, concentrations of the main contaminant benzene were observed to increase constantly in the lower aquifer to levels of more than 2.5 mM. This was accompanied by decreasing concentrations of sulphate (SO₄^2-), which has been previously shown to be the main electron acceptor for benzene oxidation at this site, resulting in an electron acceptor-limited, sulphidic benzene plume. Therefore, a field experiment was conducted to stimulate benzene biodegradation by injecting nitrate (NO₃^-) into the sulphidic benzene plume aiming (i) to recycle sulphate by nitrate-dependent sulphide oxidation, and (ii) to serve as direct electron acceptor for benzene oxidation. Within 60 days, 6.74 tons sodium nitrate (NaNO₃) were injected into the lower aquifer, and the resulting biogeochemical effects within the benzene plume were monitored for more than one year by chemical and microbiological analyses of groundwater samples taken from various depths of ten monitoring wells located in three observation lines downstream of nitrate injection. Nitrate was microbiologically consumed, as shown by changes in δ¹⁵N-NO₃^- and δ¹⁸O-NO₃^- values, partial nitrite accumulation, and changing ratios of Na⁺/NO₃^-. Main electron donors for nitrate reduction were reduced sulphur compounds, verified by changing δ³⁴S-SO₄^2- and δ¹⁸O-SO₄^2- values, partially increasing sulphate concentrations, and strongly increasing abundances of typical sulphur-oxidizing, nitrate-reducing bacterial taxa within the nitrate plume. The general absent hydrogen isotope fractionation of benzene, also in the sulphidic, nitrate-free part of the plume, indicates that benzene was not biodegraded by sulphate-reducing consortia. However, detected small carbon isotope fractionation of benzene points to in situ benzene biodegradation processes in the plume, probably supported by nitrate. In conclusion, nitrate injection resulted in changing redox conditions and recycling of sulphate in the sulphidic, sulphate-depleted benzene plume due to microbial oxidation of reduced sulphur species, leading to presumably favored conditions for in situ benzene biodegradation.

Production of Lignocellulolytic Enzymes and Biomass of Trametes versicolor from Agro-Industrial Residues in a Novel Fixed-Bed Bioreactor with Natural Convection and Forced Aeration at Pilot Scale

Solid-state fermentation requires the development of more efficient cultivation systems for its industrial application. The objective of this work was to evaluate the effect of aeration regime on the production of biomass and several lignocellulolytic enzymes (laccase, manganese peroxidase, endoxylanase, β-glucosidase, and total cellulases) by Trametes versicolor in a novel fixed-bed solid-state pilot-scale bioreactor. Three regimes were assessed: natural convection, low aeration level (10 min every 6 h at 10 L/h air flowrate), and high aeration level (1 h every 6 h at 10 L/h air flowrate). The mushroom was grown on a medium based on lignocellulosic residues. The design of the bioreactor, as well as the control of aeration, humidity, and temperature of the beds, allowed T. versicolor to grow properly on the medium, reaching a maximum biomass production of 204.7 mg/g dry solid (ds). The influence that aeration regime had on the production of lignocellulolytic enzymes was determined. Low level of forced aeration favored obtaining the highest titers of laccase (6.37 U/g ds) compared to natural convection and high aeration level. The greatest lignin degradation was also verified for low aeration regime. For the first time, pilot scale cultivation of T. versicolor was reported in a fixed-bed bioreactor.

New Light on Phytoremediation: The Use of Luminescent Solar Concentrators

The latest developments in photovoltaic studies focus on the best use of the solar spectrum through Luminescent Solar Concentrators (LSC). Due to their structural characteristics, LSC panels allow considerable energy savings. This significant saving can also be of great interest in the remediation of contaminated sites, which nowadays requires green interventions characterized by high environmental sustainability. This study reported the evaluation of LSC panels in phytoremediation feasibility tests. Three plant species were used at a microcosm scale on soil contaminated by arsenic and lead. The experiments were conducted by comparing plants grown under LSC panels doped with Lumogen Red F305 (BASF) with plants grown under polycarbonate panels used for greenhouse construction. The results showed a higher production of biomass by the plants grown under the LSC panels. The uptake of the two contaminants by plants was the same in both the growing conditions, thus resulting in an increased total accumulation (defined as metal concentration times produced biomass) in plants grown under LSC panels, indicating an overall higher phytoextraction efficiency. This seems to confirm the potential that LSCs have to be building-integrated on greenhouse roofs, canopies, and shelters to produce electricity while increasing plants productivity, thus reducing environmental pollution, and increasing sustainability.

Identifying remedial solutions through optimal bioremediation design under real-world field conditions

Over more than a century of intense industrial production and associated accidental release, petroleum products (e.g., gasoline, diesel, fuel oil) have contaminated a significant portion of the world's groundwater resources. Groundwater remediation is generally a complex task, especially where aquifers and the associated contaminant distribution are highly heterogeneous. The ability to predict the efficiency of such remediation is of crucial importance, as the costs are strongly linked to the treatment design and duration. In this study, a coupled simulation-optimization (S/O) framework, consisting of a process-based reactive transport simulation model linked with particle swarm optimization (PSO) was developed. It was subsequently applied for the design of a real-world in situ bio-treatment of a BTEX contaminated aquifer in France. In the application, the optimization framework was used to simultaneously determine optimal well locations and their optimal injection rates, both constituting key elements of the enhanced biodegradation design problem. The optimization of the treatment efficiency was examined in terms of three different regulatory objectives, (1) minimization of the residual NAPL mass of the key contaminant, i.e., benzene, in the source zone, (2) reduction of the maximum concentration of benzene in groundwater, and (3) minimization of the time required to reduce the benzene concentration in groundwater to below a threshold value. Our analysis of potential, optimal remediation strategies showed that: (i) the complexity of the biodegradation behavior at real sites may favor very different remediation options as a result of varying remediation targets, (ii) the long term behavior of the contaminants after the end of the active treatment period, which is often neglected, showed to have a significant influence on remediation design that requires increased attention, (iii) PSO has shown to be a very efficient algorithm in the context of the present study. The insights that can be gained from such a framework will provide decision support to select the most suitable remediation strategy while facing different regulatory objectives.

Sustainability in ElectroKinetic Remediation Processes: A Critical Analysis

In recent years, the development of suitable technologies for the remediation of environmental contaminations has attracted considerable attention. Among these, electrochemical approaches have gained prominence thanks to the many possible applications and their proven effectiveness. This is particularly evident in the case of inorganic/ionic contaminants, which are not subject to natural attenuation (biological degradation) and are difficult to treat adequately with conventional methods. The purpose of this contribution is to present a critical overview of electrokinetic remediation with particular attention on the sustainability of the various applications. The basis of technology will be briefly mentioned, together with the phenomena that occur in the soil and how that will allow its effectiveness. The main critical issues related to this approach will then be presented, highlighting the problems in terms of sustainability, and discussing some possible solutions to reduce the environmental impact and increase the cost-effectiveness and sustainability of this promising technology.

Saccharibacteria as Organic Carbon Sinks in Hydrocarbon-Fueled Communities

Organisms of the candidate phylum Saccharibacteria have frequently been detected as active members of hydrocarbon degrading communities, yet their actual role in hydrocarbon degradation remained unclear. Here, we analyzed three enrichment cultures of hydrocarbon-amended groundwater samples using genome-resolved metagenomics to unravel the metabolic potential of indigenous Saccharibacteria. Community profiling based on ribosomal proteins revealed high variation in the enrichment cultures suggesting little reproducibility although identical cultivation conditions were applied. Only 17.5 and 12.5% of the community members were shared between the three enrichment cultures based on ribosomal protein clustering and read mapping of reconstructed genomes, respectively. In one enrichment, two Saccharibacteria strains dominated the community with 16.6% in relative abundance and we were able to recover near-complete genomes for each of them. A detailed analysis of their limited metabolism revealed the capacity for peptide degradation, lactate fermentation from various hexoses, and suggests a scavenging lifestyle with external retrieval of molecular building blocks. In contrast to previous studies suggesting that Saccharibacteria are directly involved in hydrocarbon degradation, our analyses provide evidence that these organisms can be highly abundant scavengers acting rather as organic carbon sinks than hydrocarbon degraders in these communities.

Bioelectrochemical degradation of monoaromatic compounds: Current advances and challenges

Monoaromatic compounds (MACs) are typical refractory organic pollutants which are existing widely in various environments. Biodegradation strategies are benign while the key issue is the sustainable supply of electron acceptors/donors. Bioelectrochemical system (BES) shows great potential in this field for providing continuous electrons for MACs degradation. Phenol and BTEX (Benzene, Toluene, Ethylbenzene and Xylenes) can utilize anode to enhance oxidative degradation, while chlorophenols, nitrobenzene and antibiotic chloramphenicol (CAP) can be efficiently reduced to less-toxic products by the cathode. However, there still have several aspects need to be improved including the scale, electricity output and MACs degradation efficiency of BES. This review provides a comprehensive summary on the BES degradation of MACs, and discusses the advantages, future challenges and perspectives for BES development. Instead of traditional expensive dual-chamber configurations for MACs degradation, new single-chamber membrane-less reactors are cost-effective and the hydrogen generated from cathodes may promote the anode degradation. Electrode materials are the key to improve BES performance, approaches to increase the biofilm enrichment and conductivity of materials have been discussed, including surface modification as well as composition of carbon and metal-based materials. Besides, the development and introduction of functional microbes and redox mediators, participation of sulfur/hydrogen cycling may further enhance the BES versatility. Some critical parameters, such as the applied voltage and conductivity, can also affect the BES performance, which shouldn't be overlooked. Moreover, sequential cathode-anode cascaded mode is a promising strategy for MACs complete mineralization.

BTEX biodegradation by Bacillus amyloliquefaciens subsp. plantarum W1 and its proposed BTEX biodegradation pathways

Benzene, toluene, ethylbenzene and (p-, m- and o-) xylene (BTEX) are classified as main pollutants by several environmental protection agencies. In this study, a non-pathogenic, Gram-positive rod-shape bacterium with an ability to degrade all six BTEX compounds, employed as an individual substrate or as a mixture, was isolated. The bacterial isolate was identified as Bacillus amyloliquefaciens subsp. plantarum strain W1. An overall BTEX biodegradation (as individual substrates) by strain W1 could be ranked as: toluene > benzene, ethylbenzene, p-xylene > m-xylene > o-xylene. When presented in a BTEX mixture, m-xylene and o-xylene biodegradation was slightly improved suggesting an induction effect by other BTEX components. BTEX biodegradation pathways of strain W1 were proposed based on analyses of its metabolic intermediates identified by LC–MS/MS. Detected activity of several putative monooxygenases and dioxygenases suggested the versatility of strain W1. Thus far, this is the first report of biodegradation pathways for all of the six BTEX compounds by a unique bacterium of the genus Bacillus. Moreover, B. amyloliquefaciens subsp. plantarum W1 could be a good candidate for an in situ bioremediation considering its Generally Recognized as Safe (GRAS) status and a possibility to serve as a plant growth-promoting rhizobacterium (PGPR).

Degradation of BTEX mixture by a new Pseudomonas putida strain: role of the quorum sensing in the modulation of the upper BTEX oxidative pathway

A new Pseudomonas putida strain (AQ8) was isolated from a decommissioned oil refinery's soil in Italy and characterized for its ability to degrade BTEX. The draft genome of the new strain was sequenced and annotated for genes that encode enzymes putatively involved in BTEX degradation and quorum sensing. The strain was transformed with a plasmid expressing lactonase, which cleaves the autoinducer quorum sensing signal molecule, the acyl-homoserine lactone, to obtain a quorum sensing minus strain. P. putida AQ8 depleted the 40% on average of all the components of the initial BTEX concentration in 36 h. The quorum sensing minus strain, in the same time interval, depleted only the 10% of the initial BTEX concentration. The role of quorum sensing in regulating the expression of the annotated benzene/toluene dioxygenase gene (benzA) and biphenyl/toluene/benzene dioxygenase (bphA) genes, which are involved in BTEX degradation, was studied by quantitative RT-real-time quantitative (q)PCR analysis. The qPCR data showed decreased levels of expression of the benzA and bphA genes in the quorum sensing minus strain. Our results showed, for the first time, quorum sensing modulation of the level of transcription of dioxygenase genes in the upper BTEX oxidation pathway.

Production of biosurfactant by Bacillus subtilis RSL-2 isolated from sludge and biosurfactant mediated degradation of oil

This study aims to unveil the effect of biosurfactant as stimulant in crude oil bioremediation. Isolated oil-degrading strain, B. subtilis RSL 2 was optimized for the maximum oil degradation and biosurfactant production using Response surface methodology. The produced biosurfactant was characterized and investigated for its effect on microbial oil degradation in two modes (a) sequential and (b) simultaneous. The strain produced 3.5 g/L of biosurfactant at pH 4.0, 25 °C, using 1 g/L crude oil as the only C-source in 7 days, which was characterized as lipopeptide with a critical micelle concentration (CMC) of 0.5 g/L. The biosurfactant improved surface wettability of a hydrophobic substrate i.e. increased surface energy from 30 ± 1 to 35 ± 1 mJ/m². Further, the simultaneous feed of biosurfactant at 0.5 CMC enhanced oil biodegradation (72%) and biosurfactant production (5.2 g/L) by about 1.6 times than the sequential mode due to improvement in mobilization of oil thus making it more bioavailable.

Diagnosing bioremediation of crude oil-contaminated soil and related geochemical processes at the field scale through microbial community and functional genes

Purpose

Bioremediation is widely considered the most desirable procedure for remediation of oil-contaminated soil. Few studies have focused on the relationships among microbial community, functional genes of biodegradation, and geochemical processes during field bioremediation, which provide crucial information for bioremediation.

Methods

In the current study, the microbial community and functional genes related to hydrocarbon and nitrogen metabolism, combined with the soil physico-chemical properties, were used to diagnose a set of bioremediation experiments, including bioaugmentation, biostimulation, and phytoremediation, at the field scale.

Result

The results showed that the added nutrients stimulated a variety of microorganisms, including hydrocarbon degradation bacteria and nitrogen metabolism microorganisms. The functional genes reflected the possibility of aerobic denitrification in the field, which may be helpful in biodegradation. Biostimulation was found to be the most suitable of the studied bioremediation methods in the field.

Conclusion

We offer a feasible approach to obtain useful bioremediation information and assist with the development of appropriate remediation procedures. The findings improve our knowledge of the interactions between microorganisms and edaphic parameters.

Toluene Adsorption by Mesoporous Silicas with Different Textural Properties: A Model Study for VOCs Retention and Water Remediation

In this work, different mesoporous silicas were studied as potential sorbents for toluene, selected as a model molecule of aromatic organic fuel-based pollutants. Three siliceous materials with different textural and surface properties (i.e., fumed silica and mesoporous Santa Barbara Amorphous (SBA)-15 and Mobil Composition of matter (MCM)-41 materials) were considered and the effect of their physico-chemical properties on the toluene adsorption process was studied. In particular, FT-IR spectroscopy was used to qualitatively study the interactions between the toluene molecule and the surface of silicas, while volumetric adsorption analysis allowed the quantitative determination of the toluene adsorption capacity. The combined use of these techniques revealed that textural properties of the sorbents, primarily porosity, are the driving forces that control the adsorption process. Considering that, under real conditions of usage, the sorbents are soaked in water, their hydrothermal stability was also investigated and toluene adsorption by both the gas and aqueous phase on hydrothermally pre-treated samples was studied. The presence of ordered porosity, together with the different pore size distribution and the amount of silanol groups, strongly affected the adsorption process. In toluene adsorption from water, SBA-15 performed better than MCM-41.

Enhanced removal of bisphenol A from contaminated soil by coupling Bacillus subtilis HV-3 with electrochemical system

Exposure to endocrine disruptors interferes with the synthesis, release, transport and metabolic activities of hormones, thus impairing human health significantly. Bisphenol A (BpA), an endocrine disruptor, commonly released into the environment by industrial activities and needs immediate attention. This study aims at investigating the process and prospects of deploying bio-electrochemical systems (BES) for the removal of BpA from artificially contaminated soil using Bacillus subtilis HV-3. The BES was setup with desired operating conditions: initial concentration of BpA (80-150 mg/L), pH (3-11) and applied potential voltage (0.6-1.4 V). Under optimized conditions (initial BpA concentration, 100 mg/L; pH 7; and applied voltage 1.0 V), close to 98% degradation of BpA was achieved. The intermediates produced during degradation were analysed using High performance liquid chromatography-Mass spectrometry and the possible degradation pathway was elucidated. Phytotoxicity studies in the remediated soil with Phaseolus mungo confirmed the environmental applicability of the BES system.

Biodegradation of aromatic hydrocarbons using microbial adsorbed bioreactor

Polyurethane (PU) tubular coil-based bioreactor was constructed and evaluated for the effective biodegradation of benzene, toluene, xylene and phenol (BTXP). Herein, the removal of BTXP was done with a formulated bacterial consortium adsorbed on the inner surface of the PU coil. The formulated consortium consisted of four bacterial strains namely, Alcaligenes sp. d ₂ , Enterobacter aerogenes, Raoultella sp. and Bacillus megaterium. The adsorption ability of the bacterial cells onto the coil surface was assessed by spectrophotometric and Scanning Electron Microscopic (SEM) analysis. BTXP degradation performance was evaluated by Ultra-Violet spectroscopy and the degradation was confirmed by Fourier Transform Infrared Spectroscopy (FT/IR). The bioreactor constructed using polyurethane (PU) tubular coil with adsorbed bacterial cells exhibited 70% degradation capacity of 250 µL of 5% benzene, toluene, xylene and phenol (BTXP) at a pH of 6 within 8 h of treatment. FT/IR spectra of the treated sample indicated the production of ketonic, carboxylic acid/esters during biodegradation. The innovative technology proposed in the current study with the formulated bacterial consortium and the novel bioreactor opens up new possibilities for the better removal of BTXP mixture from contaminated sites and industrial effluents.