Complete degradation of the azo dye Acid Orange-7 and bioelectricity generation in an integrated microbial fuel cell, aerobic two-stage bioreactor system in continuous flow mode at ambient temperature

Microbial fuel cells for mineralization and decolorization of azo dyes: Recent advances in design and materials

Microbial fuel cells (MFCs) exhibit tremendous potential in the sustainable management of dye wastewater via degrading azo dyes while generating electricity. The past decade has witnessed advances in MFC configurations and materials; however, comprehensive analyses of design and material and its association with dye degradation and electricity generation are required for their industrial application. MFC models with high efficiency of dye decolorization (96-100%) and a wide variation in power generation (29.4-940 mW/m²) have been reported. However, only 28 out of 104 studies analyzed dye mineralization - a prerequisite to obviate dye toxicity. Consequently, the current review aims to provide an in-depth analysis of MFCs potential in dye degradation and mineralization and evaluates materials and designs as crucial factors. Also, structural and operation parameters critical to large-scale applicability and complete mineralization of azo dye were evaluated. Choice of materials, i.e., bacteria, anode, cathode, cathode catalyst, membrane, and substrate and their effects on power density and dye decolorization efficiency presented in review will help in economic feasibility and MFCs scalability to develop a self-sustainable solution for treating azo dye wastewater.

Recent progress in treatment of dyes wastewater using microbial-electro-Fenton technology

Globally, textile dyeing and manufacturing are one of the largest industrial units releasing huge amount of wastewater (WW) with refractory compounds such as dyes and pigments. Currently, wastewater treatment has been viewed as an industrial opportunity for rejuvenating fresh water resources and it is highly required in water stressed countries. This comprehensive review highlights an overall concept and in-depth knowledge on integrated, cost-effective cross-disciplinary solutions for domestic and industrial (textile dyes) WW and for harnessing renewable energy. This basic concept entails parallel or sequential modes of treating two chemically different WW i.e., domestic and industrial in the same system. In this case, contemporary advancement in MFC/MEC (METs) based systems towards Microbial-Electro-Fenton Technology (MEFT) revealed a substantial emerging scope and opportunity. Principally the said technology is based upon previously established anaerobic digestion and electro-chemical (photo/UV/Fenton) processes in the disciplines of microbial biotechnology and electro-chemistry. It holds an added advantage to all previously establish technologies in terms of treatment and energy efficiency, minimal toxicity and sludge waste, and environmental sustainable. This review typically described different dyes and their ultimate fate in environment and recently developed hierarchy of MEFS. It revealed detail mechanisms and degradation rate of dyes typically in cathodic Fenton system under batch and continuous modes of different MEF reactors. Moreover, it described cost-effectiveness of the said technology in terms of energy budget (production and consumption), and the limitations related to reactor fabrication cost and design for future upgradation to large scale application.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Polyaniline on Stainless Steel Fiber Felt as Anodes for Bioelectrodegradation of Acid Blue 29 in Microbial Fuel Cells

This study investigated the advantages of using low-cost polyaniline-fabricated stainless steel fiber felt anode-based microbial fuel cells (PANI-SSFF-MFCs) for azo dye acid blue 29 (AB29) containing wastewater treatment integrated with an aerobic bioreactor. The findings of electrochemical impedance spectroscopy (EIS) and polarization studies showed that the PANI–SSFF anode considerably decreased the MFC internal resistance. The highest power density of 103 ± 3.6 mW m−2 was achieved by PANI-SSFF-MFCs with a decolorization efficiency of 93 ± 3.1% and a start-up time of 13 days. The final chemical oxygen demand (COD) removal efficiencies for integrated PANI–SSFF–MFC–bioreactor and SSFF–MFC–bioreactor set-ups were 92.5 ± 2% and 80 ± 2%, respectively. Based on 16S rRNA gene sequencing, a substantial microbial community change was observed in MFCs. The majority of sequences were from the Proteobacteria phylum, accounting for 72% and 55% in PANI–SSFF–anodic biofilm and suspension, respectively, and 58 and 45% in SSFF–anodic biofilm and suspension, respectively. The relative abundance of the seven most abundant genera (Pseudomonas, Acinetobacter, Stenotrophomonas, Geothrix, Dysgonomonas, Shinella, and Rhizobiales) was higher in PANI–SSFF–MFCs (46.1% in biofilm and 55.4% in suspension) as compared to SSFF–MFC (43% in biofilm and 40.8% in suspension) which predominantly contributed to the decolorization of AB29 and/or electron transfer. We demonstrate in this work that microbial consortia acclimated to the MFC environment and PANI-fabricated anodes are capable of high decolorization rates with enhanced electricity production. A combined single-chamber MFC (SMFC)-aerobic bioreactor operation was also performed in this study for the efficient biodegradation of AB29.

Microbial fuel cells a state-of-the-art technology for wastewater treatment and bioelectricity generation

Wastewater treatment and electricity generation have been the major concerns for the last few years. The scarcity of fossil fuels has led to the development of unconventional energy resources that are pollution-free. Microbial fuel cell (MFC) is an environmental and eco-friendly technology that harvests energy through the oxidation of organic substrates and transform into the electric current with the aid of microorganisms as catalysts. This review presents power output and colour removal values by designing various configurations of MFCs and highlights the importance of materials for the fabrication of anode and cathode electrodes playing vital roles in the formation of biofilm and redox reactions taking place in both chambers. The electron transfer mechanism from microbes towards the electrode surface and the generation of electric current are also highlighted. The effect of various parameters affecting the cell performance such as type and amount of substrate, pH and temperature maintained within the chambers have also been discussed. Although this technology presents many advantages, it still needs to be used in combination with other processes to enhance power output.

Innovative constructed wetland coupled with microbial fuel cell for enhancing diazo dye degradation with simultaneous electricity generation

A novel earthen separator-based dual-chambered unplanted core of constructed wetland coupled with microbial fuel cell was developed for studying the microbe-material interaction and their effect on treatment performance and electricity generation. The constructed wetland integrated microbial fuel cell was evaluated for the degradation of high molecular weight diazo Congo red dye as a model pollutant. The system exhibited 89.99 ± 0.04% of dye decolorization and 95.80 ± 0.71% of chemical oxygen demand removal efficiency from an initial concentration of 50 ± 10 mg/L and 750 ± 50 mg/L, respectively. Ultraviolet-Visible spectrophotometric and gas chromatography-mass spectrometric analysis revealed naphthalene and phenol as mineralized products. The developed system achieved high power density and current density generation of 235.94 mW/m³ and 1176.4 mA/m³, respectively. Results manifested that dual-chambered constructed wetland coupled with microbial fuel cell has a high capability of dye decolorization and toxicity abatement with appreciable simultaneous bioelectricity generation owing to the significantly low internal resistance of 100 Ω.

Microbe mediated remediation of dyes, explosive waste and polyaromatic hydrocarbons, pesticides and pharmaceuticals

•

Environmental pollutants dyes, pesticides, pharmaceuticals, explosive waste and polyaromatic hydrocarbons.

•

Environmental pollutants toxicity.

•

Possible microbial biodegradation pathways of environmental pollutants.

Industrialization and human activities have led to serious effects on environment. With the progress taking place in the biodegradation field, it is important to summarize the latest advancement. In this review, we intend to provide insights on the recent progress on the biodegradation of environmental contaminants such as dyes, pesticides, pharmaceuticals, explosive waste and polyaromatic hydrocarbons by microorganisms. Along with the biodegradation of environmental contaminants, toxicity effects have also been discussed.

Microbial Fuel Cell United with Other Existing Technologies for Enhanced Power Generation and Efficient Wastewater Treatment

Nowadays, the world is experiencing an energy crisis due to extensive globalization and industrialization. Most of the sources of renewable energy are getting depleted, and thus, there is an urge to locate alternative routes to produce energy efficiently. Microbial fuel cell (MFC) is a favorable technology that utilizes electroactive microorganisms acting as a biocatalyst at the anode compartment converting organic matter present in sewage water for bioelectricity production and simultaneously treating wastewater. However, there are certain limitations with a typical stand-alone MFC for efficient energy recovery and its practical implementation, including low power output and high cost associated with treatment. There are various modifications carried out on MFC for eliminating the limitations of a stand-alone MFC. Examples of such modification include integration of microbial fuel cell with capacitive deionization technology, forward osmosis technology, anaerobic digester, and constructed wetland technology. This review describes various integrated MFC systems along with their potential application on an industrial scale for wastewater treatment, biofuel generation, and energy production. As a result, such integration of MFCs with existing systems is urgently needed to address the cost, fouling, durability, and sustainability-related issues of MFCs while also improving the grade of treatment received by effluent.

Recent advancements in azo dye decolorization in bio-electrochemical systems (BESs): Insights into decolorization mechanism and practical application

Recent advances in bio-electrochemical systems (BESs) for azo dye removal are gaining momentum due to having electrode biocarrier and electro-active bacteria that could stimulate decolorization via extracellular electron transfer. Enhanced decolorization performance is observed in most laboratory studies, indicating the great potential of BESs as an alternative to the traditional biological processes or serving as a pre-/post-processing unit to improve the performance of biological processes. It is proven more competitive in environmental friendly than physicochemical methods. While, the successful application of BESs to azo dye-containing wastewater remediation requires a deeper evaluation of its performance, mechanism and typical attributes, and a comprehensive potential evaluation of BESs practical application in terms of economic analysis and technical optimizations. This review is organized to address BESs as a practical option for azo dye removal by analyzing the decolorization mechanisms and involved functional microorganisms, followed by the comparisons of device configurations, operational conditions, and economic evaluation. It further highlights the current hurdles and prospects for the abatement of azo dyes via BES related techniques.

Aerobic degradation of nonhalogenated organophosphate flame esters (OPEs) by enriched cultures from sludge: Kinetics, pathways, bacterial community evolution, and toxicity evaluation

The degradation by bacteria has been considered the main process for eliminating nonhalogenated organophosphate esters (OPEs) from wastewater treatment plants (WWTPs), but limited research has reported the biodegradation processes and clarified the microbial-mediated mechanisms for nonhalogenated OPE degradation in WWTPs. The aim of this study was to monitor the biodegradation of the most common nonhalogenated OPEs, namely, tris(2-butoxyethyl) phosphate (TBOEP), tris (n-butyl) phosphate (TNBP) and trisphenyl phosphate (TPHP), under aerobic conditions by sludge cultures from a conventional sewage plant. The microbial cultures were enriched separately with each OPE from activated sludge cultures, and the presence of glucose significantly enhanced degradation of the OPEs during the enrichment. The removal ratios for the three OPEs reached 29.3-89.9% after 5 cycles (25 days) of cultivation, and the first-order degradation kinetics followed the order of TPHP > TBOEP > TNBP, with their half-lives ranging between 12.8 and 99.0 h. Pathways of hydrolysis, hydroxylation, methoxylation, and substitution were confirmed for the aerobic biodegradation of these nonhalogenated OPEs, but only di-alkyl phosphates (DAPs) largely accumulated in culture medium as the most predominant transformation products. Phylotypes in Klebsiella were significantly more abundant during OPE biodegradation than in the initial sludge, which indicated that these microorganisms are associated with the biodegradation of nonhalogenated OPEs in sludge culture. Biodegradation of all investigated nonhalogenated OPEs was associated with a significant reduction in the residual toxicity to Vibrio fischeri, indicating a rather positive ecotoxicological outcome of the aerobic biotransformation processes achieved by the enriched sludge culture.

Integrated air cathode microbial fuel cell-aerobic bioreactor set-up for enhanced bioelectrodegradation of azo dye Acid Blue 29

In this study, an azo dye (Acid Blue 29 or AB29) was efficiently degraded with acetate as co-substrate into less contaminated biodegraded products using an integrated single chamber microbial fuel cell (SMFC)-aerobic bioreactor set-up. The decolorization efficiencies were varied from 91 ± 2% to 94 ± 1.9% and more than 85% of chemical oxygen demand (COD) removal was achieved for all dye concentrations after different operating time. The highest coulombic efficiency (CE) and cell potential were 3.18 ± 0.45% and 287.2 mV, respectively, for SMFC treating 100 mg L^-1 of AB29. Electrochemical impedance spectroscopy (EIS) revealed that the anode resistance was 0.3 Ω representing an entirely grown biofilm on the anode surface resulted in higher electron transfer rate. Gas chromatography coupled mass spectrometry (GC-MS) investigation demonstrated that initially biodegradation of AB29 started with the cleavage of the azo bond (-N=N-), resulted the biotransformation into aromatic amines. In successive aerobic treatment stage, these amines were biodegraded into lower molecular weight compounds. The 16S rRNA microbial community analysis indicated that at phylum level, both inoculum and dye acclimated cultures were mainly consisting of Proteobacteria which was 27.9, 53.6 and 68.9% in inoculum, suspension and anodic biofilm, respectively. At genus level, both suspension and biofilm contained decolorization as well as electrochemically active bacteria. The outcomes exhibited that the AB29 decolorization would contest with electrogenic bacteria for electrons.

Treatment of mixed dairy and dye wastewater in anode of microbial fuel cell with simultaneous electricity generation

Microbial fuel cell (MFC) is a green technology that converts the stored chemical energy of organic matter to electricity; therefore, it can be used for wastewater purification and energy production simultaneously. In this study, three kinds of dairy products, including milk, cheese water, and yogurt water, were mixed with Acid orange 7 (AO7) as the model wastewater and used as the anolyte of an MFC. The capability of the system in energy production and dye removal was also investigated. The FESEM images were used to investigate the biofilms attachment to the anodes. Moreover, the polarization curves, electrochemical impedance spectroscopy, cyclic voltammetry (CV), voltage-time profiles, and coulombic efficiency were used to evaluate the electrochemical activity of the MFCs. Based on the CV results, the biofilm formation significantly improved the electrochemical activity of the electrodes. Maximum power density, voltage, and coulombic efficiency were obtained as 44.05 mW.m^-2, 332.4 mV, and 1.76%, respectively, for cheese water + AO7 anolyte, but the milk + AO7 MFC produced a stable voltage for a long time and its performance was similar to the cheese water + AO7 anolyte. Maximum COD removal and decolorization efficiencies were obtained equal to 84.57 and 92.18% for yogurt water + AO7 and cheese water + AO7 anolytes, respectively.

The synergistic effect of biophoto anode for the enhancement of current generation and degradation

The demand for removal of refractory organic pollutants limits the application of microbial fuel cells. In this study, the synergistic effects of bioelectrochemical and photocatalysis methods were captured by constructing a biophoto anode from a combination of WO₃/TiO₂ and carbon felt. This biophoto electrode was able to decrease the aniline concentration from 63.3 ± 6.2 to 9.3 ± 5.5 mg/L. The structure of the benzene ring was broken through strong oxidation by photocatalysis. Electrochemical analysis showed that photocatalysis also enhanced the extracellular electron transfer of microorganisms and reduced the resistance of the anode from 136.9 Ω to 69.9 Ω. In addition, the maximum current output increased by 28.5% under the composite biophoto electrode. Further analysis of the microbial community indicated that the biophoto electrode promoted the enrichment of Geobacter in the anode. This biophoto electrode provided a method for overcoming the disadvantages of anaerobic degradation of refractory organics.

Outlook on the Role of Microbial Fuel Cells in Remediation of Environmental Pollutants with Electricity Generation

A wide variety of pollutants are discharged into water bodies like lakes, rivers, canal, etc. due to the growing world population, industrial development, depletion of water resources, improper disposal of agricultural and native wastes. Water pollution is becoming a severe problem for the whole world from small villages to big cities. The toxic metals and organic dyes pollutants are considered as significant contaminants that cause severe hazards to human beings and aquatic life. The microbial fuel cell (MFC) is the most promising, eco-friendly, and emerging technique. In this technique, microorganisms play an important role in bioremediation of water pollutants simultaneously generating an electric current. In this review, a new approach based on microbial fuel cells for bioremediation of organic dyes and toxic metals has been summarized. This technique offers an alternative with great potential in the field of wastewater treatment. Finally, their applications are discussed to explore the research gaps for future research direction. From a literature survey of more than 170 recent papers, it is evident that MFCs have demonstrated outstanding removal capabilities for various pollutants.

Inducing laccase activity in white rot fungi using copper ions and improving the efficiency of azo dye treatment with electricity generation using microbial fuel cells

This work presents a white rot fungus-microbial fuel cell (WRF-MFC) that uses WRF that is grown at its cathode. Adding Cu²⁺ to the fungi-containing solid medium stimulated WRF-secreting laccase, which catalyzed the redox reaction in the MFC and thereby promoting the generation of electricity. Adding 12.5 mg L^-1 Cu²⁺ to a G. lucidum-containing medium provided the greatest laccase stimulation and increased the laccase activity by a factor of 1.6. Adding 12.5 mg L^-1 Cu²⁺ to the WRF chamber of WRF-MFC increased its decolorization of Acid Orange 7 (AO-7) and increased its power density to 223 mW m^-2, which was 1.77 times that of an MFC without WRF. The enhancement of decolorization and electricity generation improved the performance of the WRF-MFC, indicating that a laccase-catalyzed cathode has great potential effectiveness in microbial fuel cells.

Decolorization of Acid Orange 7 by extreme-thermophilic mixed culture

Although a large amount of textile wastewater is discharged at high temperatures, azo dye reduction under extreme-thermophilic conditions by mixed cultures has gained little attention. In this study, Acid Orange 7 (AO7) was used as the model azo dye to demonstrate the decolorization ability of an extreme-thermophilic mixed culture. The results showed that a decolorization efficiency of over 90% was achieved for AO7. The neutral red (NR, 0.1 mM) could promote AO7 decolorization, in which the group of Cell + NR offered the highest decolorization rate of 1.568 1/h and t_1/2 was only 0.44 h, whereas after CuCl₂ addition, the decolorization rate (0.141 1/h) was lower and t_1/2 (4.92 h) was much longer. Thus, CuCl₂ notably inhibited this process. Caldanaerobacter (64.0%) and Pseudomonas (25.4%) were the main enriched bacteria, which were not reported to have the ability for dye decolorization. Therefore, this study extends the application of extreme-thermophilic biotechnology.

Effects of azo dye on simultaneous biological removal of azo dye and nutrients in wastewater

The potential disrupting effects of Azo dye on wastewater nutrients removal deserved more analysis. In this study, 15 days exposure experiments were conducted with alizarin yellow R (AYR) as a model dye to determine whether the dye caused adverse effects on biological removal of both the dye and nutrients in acclimated anaerobic-aerobic-anoxic sequencing batch reactors. The results showed that the AYR removal efficiency was, respectively, 85.7% and 66.8% at AYR concentrations of 50 and 200 mg l^-1, while higher AYR inlet (400 mg l^-1) might inactivate sludge. Lower removal of AYR at 200 mg l^-1 of AYR was due to the insufficient support of electron donors in the anaerobic process. However, the decolorized by-products p-phenylenediamine and 5-aminosalicylic were completely decomposed in the following aerobic stage at both 50 and 200 mg l^-1 of AYR concentrations. Compared with the absence of AYR, the presence of 200 mg l^-1 of AYR decreased the total nitrogen removal efficiency from 82.4 to 41.1%, and chemical oxygen demand (COD) removal efficiency initially decreased to 68.1% and then returned to around 83.4% in the long-term exposure time. It was also found that the inhibition of AYR, nitrogen and COD removal induced by a higher concentration of AYR was due to the increased intracellular reactive oxygen species production, which caused the rise of oxidation-reduction potential value and decreased ammonia monooxygenase and nitrite oxidoreductase activities.

Complete genome sequence of the dissimilatory azo reducing thermophilic bacterium Novibacillus thermophiles SG-1

With the isolation and identification of efficient azo-dye degradation bacteria, bioaugmentation with specific microbial strains has now become an effective strategy to promote the bioremediation of azo dye. However, Azo dye wastewater discharged at high temperature restricted the extensive application of the known mesophilic azoreducing microorganisms. Here we present the complete genome sequence of a bacterium capable of reducing azo dye under thermophilic condition, Novibacillus thermophiles SG-1 (=KCTC 33118^T =CGMCC 1.12363^T). The complete genome of strain SG-1 contains a circular chromosome of 3,629,225 bp with a G + C content of 50.44%. Genome analysis revealed that strain SG-1 possessed genes encoding riboflavin biosynthesis protein that would secrete riboflavin, which could act as electron shuttles to transport the electrons to extracellular azo dye in decolorization process. HPLC analysis showed that the concentration of riboflavin increased from 0.01 μM to 0.255 μM with the growth of strain SG-1 under azo dye reduction. Quantitative real-time PCR analysis further demonstrated that the gene encoding riboflavin biosynthesis protein would be involved in the azo dye decolorization. The results from this study would be beneficial to research the mechanism of anaerobic reduction of azo dye under thermophilic conditions.

Reactive Black 5 as electron donor and/or electron acceptor in dual chamber of solar photocatalytic fuel cell

The role of azo dye Reactive Black 5 (RB5) as an electron donor and/or electron acceptor could be distinguished in dual chamber of photocatalytic fuel cell (PFC). The introduction of RB5 in anode chamber increased the voltage generation in the system since degradation of RB5 might produce electrons which also would transfer through external circuit to the cathode chamber. The removal efficiency of RB5 with open and closed circuit was 8.5% and 13.6%, respectively and removal efficiency for open circuit was low due to the fact that recombination of electron-hole pairs might happen in anode chamber since without connection to the cathode, electron cannot be transferred. The degradation of RB5 in cathode chamber with absence of oxygen showed that electrons from anode chamber was accepted by dye molecules to break its azo bond. The presence of oxygen in cathode chamber would improve the oxygen reduction rate which occurred at Platinum-loaded carbon (Pt/C) cathode electrode. The V_oc, J_sc and P_max for different condition of ultrapure water at cathode chamber also affected their fill factor. The transportation of protons to cathode chamber through Nafion membrane could decrease the pH of ultrapure water in cathode chamber and undergo hydrogen evolution reaction in the absence of oxygen which then increased degradation rate of RB5 as well as its electricity generation.

Recent advancements in bioremediation of dye: Current status and challenges

The rampant industrialization and unchecked growth of modern textile production facilities coupled with the lack of proper treatment facilities have proliferated the discharge of effluents enriched with toxic, baleful, and carcinogenic pollutants including dyes, heavy metals, volatile organic compounds, odorants, and other hazardous materials. Therefore, the development of cost-effective and efficient control measures against such pollution is imperative to safeguard ecosystems and natural resources. In this regard, recent advances in biotechnology and microbiology have propelled bioremediation as a prospective alternative to traditional treatment methods. This review was organized to address bioremediation as a practical option for the treatment of dyes by evaluating its performance and typical attributes. It further highlights the current hurdles and future prospects for the abatement of dyes via biotechnology-based remediation techniques.

Ecotoxic potential of a presumably non-toxic azo dye

Microbes have potential to convert non-toxic azo dyes into hazardous products in the environment. However, the role of microbes in biotransforming such presumably non-toxic dyes has not been given proper attention, thereby, questions the environmental safety of such compounds. The present study assessed salinity driven microbial degradation of an unregulated azo dye, Acid orange 7 (AO7), under moderately halophilic conditions of textile effluent. The halophilic microbial consortium from effluent decolorized ~97% AO7 (50-500mgL^-1). The consortium efficiently decolorized the dye at different pH (5-8) and salinity (5-18% NaCl). The 16S rRNA sequence analyses confirmed the presence of Halomonas and Escherichia in the consortium. The FTIR and GC-MS analyses suggested microbial consortium degrade AO7 following symmetric and asymmetric cleavage and yield carcinogenic/mutagenic aromatic byproducts viz. aniline, 1-amino-2-naphthol, naphthalene, and phenyldiazene. In contrast to AO7, the biodegraded products caused molecular, cellular and organism level toxicity. The degraded products significantly reduced: radicle length in root elongation assay; shoot length/biomass in plant growth assays; and caused chromosomal abnormalities and reduced mitotic index in Allium cepa bioassay. We demonstrated that under saline conditions of textile effluent, halophilic microbes convert a presumably non-toxic azo dye into hazardous products. The study calls to review the current toxicity classification of azo dyes and develop environmentally sound regulatory policies by incorporating the role of environmental factors in governing dye toxicity, for environmental safety.

Microbial fuel cell-photoelectrocatalytic cell combined system for the removal of azo dye wastewater

In this study, a novel parallel circuit microbial fuel cell-photoelectrocatalytic cell (MFC-PEC) combined system was established to enhance azo dye removal. Results showed that this system had synergistic effects compared with the MFC alone. In the MFC part, a 56% decrease in chemical oxygen demand (COD) and 85% decolorization were achieved, and further reduced by 25% and 12% in the PEC part where titania nanotube functioned as the photoelectrode. For one thing, the PEC raised the maximum current of the MFC by 14.2%, which facilitated COD removal and decolorization in the MFC and promoted adenosine triphosphate (ATP) level of anode microorganisms, for another, this system significantly increased the dye removal in the PEC. Besides, cyclic voltammograms illustrated intermediate products degradation in this system. Hence, the system achieved marked deep decolorization and rapid toxic intermediate products degradation of high concentration azo dyes.

Optimization of degradation of Reactive Black 5 (RB5) and electricity generation in solar photocatalytic fuel cell system

The photocatalytic fuel cell (PFC) system was developed in order to study the effect of several operating parameters in degradation of Reactive Black 5 (RB5) and its electricity generation. Light irradiation, initial dye concentration, aeration, pH and cathode electrode are the operating parameters that might give contribution in the efficiency of PFC system. The degradation of RB5 depends on the presence of light irradiation and solar light gives better performance to degrade the azo dye. The azo dye with low initial concentration decolorizes faster compared to higher initial concentration and presence of aeration in PFC system would enhance its performance. Reactive Black 5 rapidly decreased at higher pH due to the higher amount of OH generated at higher pH and Pt-loaded carbon (Pt/C) was more suitable to be used as cathode in PFC system compared to Cu foil and Fe foil. The rapid decolorization of RB5 would increase their voltage output and in addition, it would also increase their V_oc, J_sc and P_max. The breakage of azo bond and aromatic rings was confirmed through UV-Vis spectrum and COD analysis.

Simultaneous degradation of refractory organic pesticide and bioelectricity generation in a soil microbial fuel cell with different conditions

In this study, the soil microbial fuel cells (MFCs) were constructed based on sandy soil to remove the refractory organic pesticide hexachlorobenzene (HCB) in topsoil by a simple method. The construction of membraneless single-chamber soil MFCs by setting up the cathode- and the anode-activated carbon, inoculating the sludge and adding the co-substrates can promote HCB removal significantly. The results showed that HCB removal efficiencies in the soils contaminated with 40, 80  and 200 mg/kg were 71.14%, 62.15% and 50.06%, respectively, which were 18.65%, 18.46% and 19.17% higher than the control, respectively. The electricity generation of soil MFCs in different HCB concentrations was analyzed. The highest power density reached was 70.8 mW/m², and an internal resistance of approximately 960 Ω was obtained when an external resistance loading of 1000 Ω was connected. Meanwhile, the influences of temperature, substrate species and substrate concentrations on soil MFCs initial electricity production were investigated. The addition of the anionic surfactant sodium dodecyl sulfate (SDS) into the soil MFCs system contributed to the improvement in HCB removal efficiency.

Microbial fuel cell operation using monoazo and diazo dyes as terminal electron acceptor for simultaneous decolourisation and bioelectricity generation

Monoazo and diazo dyes [New coccine (NC), Acid orange 7 (AO7), Reactive red 120 (RR120) and Reactive green 19 (RG19)] were employed as electron acceptors in the abiotic cathode of microbial fuel cell. The electrons and protons generated from microbial organic oxidation at the anode which were utilized for electrochemical azo dye reduction at the cathodic chamber was successfully demonstrated. When NC was employed as the electron acceptor, the chemical oxygen demand (COD) removal and dye decolourisation efficiencies obtained at the anodic and cathodic chamber were 73±3% and 95.1±1.1%, respectively. This study demonstrated that the decolourisation rates of monoazo dyes were ∼50% higher than diazo dyes. The maximum power density in relation to NC decolourisation was 20.64mW/m², corresponding to current density of 120.24mA/m². The decolourisation rate and power output of different azo dyes were in the order of NC>AO7>RR120>RG19. The findings revealed that the structure of dye influenced the decolourisation and power performance of MFC. Azo dye with electron-withdrawing group at para substituent to azo bond would draw electrons from azo bond; hence the azo dye became more electrophilic and more favourable for dye reduction.

Enhanced bioelectricity generation and azo dye treatment in a reversible photo-bioelectrochemical cell by using novel anthraquinone-2,6-disulfonate (AQDS)/MnOx-doped polypyrrole film electrodes

A novel anthraquinone-2,6-disulfonate/MnO_x-doped polypyrrole film (AQDS/Mn/PPy) electrode was prepared by one-step electropolymerization method and was used to improve performance of a reversible photo-bioelectrochemical cell (RPBEC). The RPBEC was operated in polarity reversion depended on dark/light reaction of alga Chlorella vulgaris by which sequential decolorization of azo dye and mineralization of decolorization products coupled with bioelectricity generation can be achieved. The results showed that formation of uniform AQDS/Mn/PPy film significantly enhanced electroactive surface area and electrocatalytic activity of carbon electrode. The RPBEC with AQDS/Mn/PPy electrodes demonstrated 77% increases in maximum power and 73% increases in Congo red decolorization rate before polarity reversion, and 198% increases in maximum power and 138% increases in decolorization products mineralization rate after polarity reversion, respectively, compared to the RPBEC with bare electrode. This was resulted from simultaneous dynamics improvement in half-reaction rate of anode and photo-biocathode due to enhanced electron transfer and algal-bacterial biofilm formation.

Accelerated azo dye degradation and concurrent hydrogen production in the single-chamber photocatalytic microbial electrolysis cell

The single-chamber microbial electrolysis cell constructed with a TiO₂-coated photocathode, termed photocatalytic microbial electrolysis cell (PMEC), was developed to accelerate methyl orange (MO) degradation and concurrent hydrogen (H₂) recovery under UV irradiation. Results showed that faster MO decolorization rates were achieved from the PMEC compared with those without UV irradiation or with open circuit. With increase of MO concentrations (acetate as co-substrate) from 50 to 300mg/L at an applied voltage of 0.8V, decolorization efficiencies decreased from 98% to 76% within 12h, and cyclic H₂ production declined from 113 to 68mL. As the possible mechanism of MO degradation, bioelectrochemical reduction, co-metabolism reduction, and photocatalysis were involved; and degradation intermediates (mainly sulfanilic acid and N,N-dimethylaniline) were further degraded by OH generated from photocatalysis. This makes MO mineralization be possible in the single-chamber PMEC. Hence, the PMEC is a promising system for dyeing wastewater treatment and simultaneous H₂ production.

Detoxification of azo dyes in the context of environmental processes

Azo dyes account for >70% of the global industrial demand (∼9 million tons). Owing to their genotoxic/carcinogenic potential, the annual disposal of ∼4,500,000 tons of dyes and/or degraded products is an environmental and socio-economic concern. In comparison to physico-chemical methods, microbe-mediated dye degradation is considered to be low-input, cost-effective and environmentally-safe. However, under different environmental conditions, interactions of chemically diverse dyes with metabolically diverse microbes produce metabolites of varying toxicity. In addition, majority of studies on microbial dye-degradation focus on decolorization with least attention towards detoxification. Therefore, the environmental significance of microbial dye detoxification research of past >3 decades is critically evaluated with reference to dye structure and the possible influence of microbial interactions in different environments. In the absence of ecosystem-based studies, the results of laboratory-based studies on dye degradation, metabolite production and their genotoxic impact on model organisms are used to predict the possible fate and consequences of azo dyes/metabolites in the environment. In such studies, the predominance of fewer numbers of toxicological assays that too at lower levels of biological organization (molecular/cellular/organismic) suggests its limited ecological significance. Based on critical evaluation of these studies the recommendations on inclusion of multilevel approach (assessment at multiple levels of biological organization), multispecies microcosm approach and native species approach in conjunction with identification of dye metabolites have been made for future studies. Such studies will bridge the gap between the fundamental knowledge on dye-microbe-environment interactions and its application to combat dye-induced environmental toxicity. Thus an environmental perspective on dye toxicity in the background of dye structure and effects of environmental processes has been developed. Based on past 3 decades of research on microbial dye detoxification, the current state of knowledge has been analyzed, environmental relevance of these studies was ascertained, research gaps in microbe-mediated azo dye detoxification have been identified and a research framework emphasizing a better understanding of complex interactions between dye-microbe and environmental processes has been proposed. It provides directions for undertaking environmentally sound microbial dye detoxification research.

Semi-empirical chemical model for indirect advanced oxidation of Acid Orange 7 using an unmodified carbon fabric cathode for H2O2 production in an electrochemical reactor

A commercial Unidirectional Carbon Fabric piece was used to design an electrode for the cathodic O2 reduction reaction in a divided (by a Nafion(®) 117 membrane) parallel plate reactor. The anode was a commercial stainless steel mesh. Under this approach it is feasible to produce H2O2 at low energy (2.08 kWh kg(-1) H2O2) in low ionic acidic medium. In the catholyte side the H2O2 can be activated with Fe(2+) to develop the Fenton reagent. It was found that Acid Orange 7 (AO7) indirect oxidation (in the concentration range of 0.12-0.24 mM) by Fenton chemistry follows a first order kinetic equation. The energy required for 0.24 mM AO7 degradation is 1.04 kWhm(-3). From each experimental AO7 oxidation the main parameters (a, mM and k, min(-1)) of the first order kinetic equation are obtained. These parameters can be correlated with AO7 concentration in the concentration range studied. Based on this method a semi-empirical chemical model was developed to predict the AO7 abatement, by means of Fenton chemistry. Good AO7 oxidation predictions can be made in the concentration range studied. A detailed discussion of the energy required for oxidizing AO7 and the accuracy of the chemical model to predict its oxidation is included in this paper.

A highly efficient single chambered up-flow membrane-less microbial fuel cell for treatment of azo dye Acid Orange 7-containing wastewater

Single chambered up-flow membrane-less microbial fuel cell (UFML MFC) was developed to study the feasibility of the bioreactor for decolorization of Acid Orange 7 (AO7) and electricity generation simultaneously. The performance of UFML MFC was evaluated in terms of voltage output, chemical oxygen demand (COD) and color removal efficiency by varying the concentration of AO7 in synthetic wastewater. The results shown the voltage generation and COD removal efficiency decreased as the initial AO7 concentration increased; this indicates there is electron competition between anode and azo dye. Furthermore, there was a phenomenon of further decolorization at cathode region which indicates the oxygen and azo dye are both compete as electron acceptor. Based on the UV-visible spectra analysis, the breakdown of the azo bond and naphthalene compound in AO7 were confirmed. These findings show the capability of integrated UFML MFC in azo dye wastewater treatment and simultaneous electricity generation.

Stimulation of oxygen to bioanode for energy recovery from recalcitrant organic matter aniline in microbial fuel cells (MFCs)

The challenge of energy generation from biodegradation of recalcitrant organics in microbial fuel cells (MFCs) is mainly attributed to their persistence to degradation under anaerobic condition in anode chamber of MFCs. In this work, we demonstrated that electricity generation from aniline, a typical recalcitrant organic matter under anaerobic condition was remarkably facilitated by employing oxygen into bioanode of MFCs. By exposing bioanode to air, electrons of 47.2 ± 6.9 C were recovered with aniline removal efficiency of 91.2 ± 2.2% in 144 h. Limited oxygen supply (the anodic headspace was initially filled with air and then closed) resulted in the decrease of electrons recovery and aniline removal efficiency by 52.5 ± 9.4% and 74.2 ± 2.1%, respectively, and further decline by respective 64.3 ± 4.5% and 82.7 ± 1.0% occurred under anaerobic condition. Community analysis showed that anode biofilm was predominated by several aerobic aniline degrading bacteria (AADB) and anode-respiration bacteria (ARB), which likely cooperated with each other and finally featured the energy recovery from aniline. Cyclic voltammetry indicated that anodic bacteria transferred electrons to anode mainly through electron shuttle. This study provided a new sight to acquaint us with the positive role of oxygen in biodegradation of recalcitrant organics on anode as well as electricity generation.

A lithotrophic microbial fuel cell operated with pseudomonads-dominated iron-oxidizing bacteria enriched at the anode

In this study, we attempted to enrich neutrophilic iron bacteria in a microbial fuel cell (MFC)-type reactor in order to develop a lithotrophic MFC system that can utilize ferrous iron as an inorganic electron donor and operate at neutral pHs. Electrical currents were steadily generated at an average level of 0.6 mA (or 0.024 mA cm^–2 of membrane area) in reactors initially inoculated with microbial sources and operated with 20 mM Fe²⁺ as the sole electron donor and 10 ohm external resistance; whereas in an uninoculated reactor (the control), the average current level only reached 0.2 mA (or 0.008 mA cm^–2 of membrane area). In an inoculated MFC, the generation of electrical currents was correlated with increases in cell density of bacteria in the anode suspension and coupled with the oxidation of ferrous iron. Cultivation-based and denaturing gradient gel electrophoresis analyses both show the dominance of some Pseudomonas species in the anode communities of the MFCs. Fluorescent in-situ hybridization results revealed significant increases of neutrophilic iron-oxidizing bacteria in the anode community of an inoculated MFC. The results, altogether, prove the successful development of a lithotrophic MFC system with iron bacteria enriched at its anode and suggest a chemolithotrophic anode reaction involving some Pseudomonas species as key players in such a system. The system potentially offers unique applications, such as accelerated bioremediation or on-site biodetection of iron and/or manganese in water samples.

Simultaneous bioelectricity generation and decolorization of methyl orange in a two-chambered microbial fuel cell and bacterial diversity

The objectives of this study were to investigate the simultaneous bioelectricity generation and decolorization of methyl orange (MO) in the anode chamber of microbial fuel cells (MFCs) in a wide concentration range (from 50 to 800 mg L(-1)) and to reveal the microbial communities on the anode after the MFC was operated continuously for more than 6 months using MO-glucose mixtures as fuel. Interestingly, the added MO played an active role in the production of electricity. The maximum voltage outputs were 565, 658, 640, 629, 617, and 605 mV for the 1 g L(-1) glucose with 0, 50, 100, 200, 300, and 500 mg L(-1) of MO, respectively. The results of three groups of comparison experiments showed that accelerated decolorization of methyl orange (MO) was achieved in the MFC as compared to MFC in open circuit mode and MFC without extra carbon sources. The decolorization efficiency decreased with an increase of MO concentration in the studied concentration range for the dye load increased. A 454 high-throughput pyrosequencing revealed the microbial communities. Geobacter genus known to generate electricity was detected. Bacteroidia class, Desulfovibrio, and Trichococcus genus, which were most likely responsible for degrading methyl orange, were also detected.