Carboxylic acid functionalized sesame straw: A sustainable cost-effective bioadsorbent with superior dye adsorption capacity

Synthesis of carboxymethyl starch co (polyacrylamide/ polyacrylic acid) hydrogel for removing methylene blue dye from aqueous solution

Natural polysaccharides, notably starch, have garnered attention for their accessibility, cost-effectiveness, and biodegradability. Modifying starch to carboxymethyl starch enhances its solubility, swelling capacity, and adsorption efficiency. This research examines the synthesis of an effective hydrogel adsorbent based on carboxymethyl starch for the elimination of methylene blue from aqueous solutions. The hydrogel was synthesized using polyacrylamide and polyacrylic acid as monomers, ammonium persulfate as the initiator, and N,N'-methylenebisacrylamide as the cross-linker. Through FESEM, swelling morphology was evaluated in both distilled water and methylene blue dye. The adsorption data elucidated that the adsorption capacity of the hydrogel significantly depends on the dosage of the adsorbent, pH, and concentration of the MB dye. At a pH of 7 and a dye concentration of 250 mg/L, the hydrogel exhibited an impressive 95 % removal rate for methylene blue. The results indicate that the adsorption process follows pseudo-second-order kinetics and conforms well to the Langmuir adsorption isotherm, indicating a maximum adsorption capacity of 1700 mg/g. According to the pseudo-second-order kinetic model and FTIR analysis, methylene blue chemisorbs to the adsorbent material. Hydrogel absorbents regulate adsorption through both intra-particle diffusion and liquid film diffusion. These results highlight the potential of the new hydrogel absorber for water purification.

A green and economic approach to synthesize magnetic Lagenaria siceraria biochar (γ-Fe2O3-LSB) for methylene blue removal from aqueous solution

In the printing and textile industries, methylene blue (a cationic azo dye) is commonly used. MB is a well-known carcinogen, and another major issue is its high content in industrial discharge. There are numerous removal methodologies that have been employed to remove it from industrial discharge; however, these current modalities have one or more limitations. In this research, a novel magnetized biochar (γ-Fe2O3-LSB) was synthesized using Lagenaria siceraria peels which were further magnetized via the co-precipitation method. The synthesized γ-Fe2O3-LSB was characterized using FTIR, X-ray diffraction, Raman, SEM-EDX, BET, and vibrating sample magnetometry (VSM) for the analysis of magnetic properties. γ-Fe2O3-LSB showed a reversible type IV isotherm, which is a primary characteristic of mesoporous materials. γ-Fe2O3-LSB had a specific surface area (SBET = 135.30 m2/g) which is greater than that of LSB (SBET = 11.54 m2/g). γ-Fe2O3-LSB exhibits a saturation magnetization value (Ms) of 3.72 emu/g which shows its superparamagnetic nature. The batch adsorption process was performed to analyze the adsorptive removal of MB dye using γ-Fe2O3-LSB. The adsorption efficiency of γ-Fe2O3-LSB for MB was analyzed by varying parameters like the initial concentration of adsorbate (MB), γ-Fe2O3-LSB dose, pH effect, contact time, and temperature. Adsorption isotherm, kinetic, and thermodynamics were also studied after optimizing the protocol. The non-linear Langmuir model fitted the best to explain the adsorption isotherm mechanism and resulting adsorption capacity ( q e =54.55 mg/g). The thermodynamics study showed the spontaneous and endothermic nature, and pseudo-second-order rate kinetics was followed during the adsorption process. Regeneration study showed that γ-Fe2O3-LSB can be used up to four cycles. In laboratory setup, the cost of γ-Fe2O3-LSB synthesis comes out to be 162.75 INR/kg which is low as compared to commercially available adsorbents. The results obtained suggest that magnetic Lagenaria siceraria biochar, which is economical and efficient, can be used as a potential biochar material for industrial applications in the treatment of wastewater.

Mechanism for the seleikctive adsorption of uranium from seawater using carboxymethyl-enhanced polysaccharide-based amidoxime adsorbent

Land-based uranium resources are becoming scarce because of the widespread development and use of nuclear energy. Therefore, to make up for the shortage of uranium resources, a new chitosan/carboxymethyl-β-cyclodextrin/quaternary ammonium salt-functionalized amidoxime carbon adsorbent (CSAOCF) was designed and synthesized for extracting uranium from seawater. Experimental studies show that the adsorption of uranium by CSAOCF is a spontaneous endothermic reaction and chemical adsorption. The theoretical maximum adsorption capacity of uranium can reach 726 mg/g at 308 K and pH = 6. Moreover, the adsorption efficiency and selectivity of CSAOCF for uranium were significantly improved after the introduction of the carboxymethyl group, and the selection and partition coefficient of CSAOCF for uranium and vanadium increased from 16-fold to 30-fold under the same conditions. This indicates that there is a synergistic effect between carboxyl and amidoxime groups, which can promote the adsorption of uranium by CSAOCF. Furthermore, CSAOCF exhibits good oil resistance and can be reused more than five times. Therefore, CSAOCF containing carboxymethyl and amidoxime functional groups can considerably improve the selective adsorption of uranium and has great potential in the extraction of uranium from seawater.

A critical review on biochar production from pine wastes, upgradation techniques, environmental sustainability, and challenges

Pine wastes, including pine needles, cones, and wood, are abundantly produced as an agroforestry by-product globally and have shown tremendous potential for biochar production. Various thermochemical conversion technologies have exhibited promising results in converting pine wastes to biochar, displaying impressive performance. Hence, this review paper aims to investigate the possibilities and recent technological advancements for synthesizing biochar from pine waste. Furthermore, it explores techniques for enhancing the properties of biochar and its integrated applications in various fields, such as soil and water remediation, carbon sequestration, battery capacitor synthesis, and bio-coal production. Finally, the paper sheds light on the limitations of current strategies, emphasizing the need for further research and study to address the challenges in pine waste-based biochar synthesis. By promoting sustainable and effective utilization of pine wastes, this review contributes to environmental conservation and resource management.

Characterization and application of ligno-cellulosic fibers derived from Robinia Pseudoacacia for the bio-sorption of methylene blue from water

Ligno-cellulosic biomasses had been recognized for their potential use to produce chemicals and biomaterials. The current study focused on the use of a new cellulosic Robinia Pseudoacacia fiber and extracted lignin as adsorbents for methylene blue (a cationic dye). The biomaterials were analyzed using FT-IR spectroscopy, SEM, XRD, and TGA-DTA techniques. The surface of Robinia fibers was rough and porous. The crystallinity index (CrI) value for Robinia fibers was found to be 32%. The ability of the studied samples to remove methylene blue from water was assessed under the variation of time, pH, dye concentration, temperature, and NaCl concentration. The maximum adsorption capacity of methylene blue reached 191 mg/g for Robinia fibers and it achieved 22 mg/g for the extracted lignin (T = 20 °C, pH = 6, and time = 90 min). The adsorption data complied with the pseudo second-order kinetic model and both Langmuir and Freundlich isotherms. Based on these findings, the process suggested the occurrence of many physicochemical interactions between methylene blue molecules and the studied biomaterials. The adsorption mechanism was exothermic, non-spontaneous, and it was described by the decrease of the disorder. Adsorption results proved that Robinia fiber was an attractive candidate for the removal of cationic dyes from water.

Enhanced removal of Cd2+ from water by AHP-pretreated biochar: Adsorption performance and mechanism

The sesame straw-derived biochar was successfully prepared via alkaline hydrogen peroxide (AHP) pretreatment in this study. Systematic experimental characterizations, 15 relevant batch and column adsorption models, combined with density functional theory (DFT) calculation were used to investigate the performances and micro-mechanisms of Cd²⁺ adsorption onto biochar. We found AHP-pretreatment could greatly improve the adsorption performance of biochar for Cd²⁺. The maximum Cd²⁺ adsorption capacity of AHP-pretreated biochar (87.13 mg g^-1) was much larger than that of unpretreated biochar. Cd²⁺ adsorption was mainly dominated by the chemisorption of the homogeneous surface monolayer. The hydroxyl and carboxyl groups on the surface of biochar provided preferential adsorption sites, and liquid film diffusion and intra-particle diffusion were two dominant rate-controlling steps. Our results showed that ion exchange, co-precipitation, surface complexation, and Cd²⁺-π interaction were the dominant adsorption mechanisms. Especially, DFT calculations well-identified that lone-pair electrons during complexation and π electrons during coordination were provided by oxygen-containing functional groups and aromatic rings, respectively. The experimental breakthrough curves fitted better with the theoretical value of the BJP model, compared to Thomas, Yoon-Nelson, and EXY models. Overall, our study provides a promising method for Cd²⁺ removal from wastewater and resource utilization of agricultural wastes.

Efficient capture of U(VI) by magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid inorganic-organic hybrid

The separation of magnetic adsorbents from aqueous solutions is made simple by using an external magnetic field. Herein, magnetic Zr(IV)-ethylenediamine tetramethylene phosphonic acid (EDTMPA) hybrids (MZrOP-x-T, x, and T were the different quality of Fe₃O₄@C and temperature in the synthesis process, respectively). A study was conducted on the uses of MZrOP-x-T in the capture of U(VI). The influences of pH, adsorption period, initial concentration, and temperature were all investigated. Furthermore, the desorption and reusability of the materials were explored. The optimal values of x and T were 0.2 g and 100 °C, respectively. At 298.15 K, the maximum adsorption capacity of MZrOP-0.2-100 was 330.30 mg·g^-1. The current research demonstrates that MZrOP-0.2-100 is a potentially effective material in removing U(VI) from radioactive solution.

Insights into selective adsorption mechanism of copper and zinc ions onto biogas residue-based adsorbent: Theoretical calculation and electronegativity difference

Modified biomass-based adsorption technique has attracted much attention in heavy metal ions removal, but selective adsorption behavior and mechanism of heavy metal ions adsorption onto biosorbent still need to be further clarified. Herein, a carboxylated biogas residue (BR-COOH) was prepared to remove the Cu²⁺ and Zn²⁺ from single/binary heavy metal ions solution and explore selective adsorption mechanism. The results exhibited that the adsorption capacities of BR-COOH for Cu²⁺ was higher than that for Zn²⁺ obviously, whether in the single or binary heavy metal ions solution. Meanwhile, the introduced carboxy groups were identified as the main sites for metal ions adsorption. Density functional theory (DFT) calculation results exhibited that the adsorption energy of Cu²⁺ (-0.51 eV) onto BR-COOH was lower than that of Zn²⁺ (-0.47 eV), indicating that the Cu²⁺ adsorbed on BR-COOH was more stable than Zn²⁺. Moreover, the metal ions adsorption capacity of BR-COOH was positively correlated with their electronegativity, which was due to that the metal ions with stronger electronegativity was more easily interacted with the negatively charged oxygen in carboxyl groups. The same results were also verified in the control experiment conducted with two other biosorbents. Therefore, the work provided a new and in-depth insight into selective adsorption of metal ions onto carboxylated biosorbent.

Equilibrium, Kinetic, and Thermodynamic Studies of Cationic Dyes Adsorption on Corn Stalks Modified by Citric Acid

The modification of agricultural wastes and their use as low-cost and efficient adsorbents is a prospective pathway that helps diminish waste and decrease environmental problems. In the present research, the natural adsorption capacity of corn stalks (CS) was improved by modification of their surface with citric acid. The adsorption capacity of the modified corn stalks (CS-C) was determined with the help of cationic dyes (methylene blue and malachite green). The equilibrium, kinetics, and thermodynamics of the cationic dyes on CS-C were studied. The Langmuir isotherm model best fitted the data both for methylene blue and malachite green adsorption on CS-C. The adsorption kinetics of the cationic dyes was well described by the pseudo-second order model. Thermodynamic studies revealed that adsorption of the cationic dyes on CS-C was an endothermic process. Negative results of ΔGo (between −31.8 and −26.3 kJ mol−1) indicated that the adsorption process was spontaneous in all the tested temperatures. The present study verified that citric acid-modified corn stalks can be used as a low-cost and effective adsorbent for removal of cationic dyes from aqueous solutions.

Agri-residual waste, wheat bran as a biosorbent for mitigation of dye pollution in industrial wastewaters

In the current investigation, a comparison of mitigation of industrial-grade, Dispersive Dark Red (DDR) (93.55%), Disperse Orange (DO) (93.48%) and lab grade, Malachite Green (MG) (95.25%), and Congo Red (CR) (97.02%) dyes using biosorptive ability of wheat bran (WB) (efficient, economical, readily available and environment-friendly adsorbent) has been reported. WB obtained from wheat (a type of grass plant, a major human food crop), is a waste product generated from agricultural practices. The effect of different variables, namely, pH, adsorbate concentration, incubation time, adsorbent dosage, and temperature were investigated to determine the optimal parameters for dye sorption. The influence of the chemical modification of the sorbent on its adsorption capacity was also tested, which showed a positive effect of acid modification towards acidic dyes and vice versa towards the basic dyes. For all the dyes, in comparison to the Freundlich model, nonlinear Langmuir model of isotherm has given better conformity, with maximum adsorption capacity of 11.14 (MG), 15.17 (CR), 12.34 (DDR), and 15.98 (DO) mg/g at their respective optimal temperature following a pseudo-second-order kinetic model for adsorption, proving it to be dependent on adsorption capacity of WB. The findings clearly suggest WB to be an efficient dye remover from aqueous solutions and can, thus, be well explored for dye pollution reduction in industrial wastewaters.

CuO-ZnO-CdWO4: a sustainable and environmentally benign photocatalytic system for water cleansing

Currently, there is a major problem of water contaminations, especially of dyes, all over the world. A new technique is being developed daily for the treatment of contaminated water. In many ways, a photocatalytic degradation of a dye by a mixed metal oxide photocatalyst is counted as the best technique for water treatment. This paper also addresses the preparation and photocatalytic application of newly developed mixed metal oxide nanocomposite, CuO-ZnO-CdWO₄. A novel mixed metal oxide CuO-ZnO-CdWO₄ nanocomposite has been synthesized by a green route using Brassica Rapa leaves extract. The application of CuO-ZnO-CdWO₄ as a photocatalyst in wastewater treatment has been thoroughly discussed. Several spectroscopic and microscopic techniques were used to characterize the prepared nanocomposite. The photocatalytic activity of CuO-ZnO-CdWO₄ nanocomposite with a band gap of 3.13 eV was observed under the artificial visible light and sunlight for the degradation of Congo red dye. The results under sunlight show the 1.45 times greater removal efficiency than under the artificial visible light. Pseudo-first-order, diffusion, and Singh kinetics models were used to describe the kinetics of dye degradation. Pseudo-first-order model was found to be best fitted model for present study. The performance of CuO-ZnO-CdWO₄ was estimated by significant parameters such as quantum yield, figure of merit, turnover number, and mean turnover frequency. The value these parameters were calculated as 1.70 × 10^-8 molecules photon^-1, 1.77 × 10^-4, 2.98 × 10⁸ s^-1, and 3.31 × 10^-4 s^-1, respectively. These parameters revealed high potential of CuO-ZnO-CdWO₄ for Congo red dye degradation.

Efficiently immobilizing uranium (VI) by oxidized carbon foam

Oxidized carbon foam (oxidized CF) was prepared by using a facile chemical oxidation treatment at relatively low temperature of 450 °C and applied to capture uranyl cation [U(VI)] from aqueous solutions. The effects of pH, contact time, initial U(VI) concentration, and temperature on the U(VI) absorption performance of oxidized CF were investigated by batch experiments. The oxidized CF was illustrated to exhibit fast sorption kinetics (92% removal within 15 min and 98% removal in 2 h) and high sorption capacity (305.77 mg g^-1 at pH 5) toward U(VI). Integrated analyses combining energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy were applied on the U(VI)-loaded oxidized CF, showing the introduction of carboxyl groups as U(VI) sorption sites on the surface of CF after oxidation treatment. Furthermore, extended X-ray absorption fine structure spectroscopy was employed to identify the binding modes of U(VI) indicating that each UO₂²⁺ cation is coordinated with one or two carboxyl groups on the equatorial plane. Notably, the low content of U(VI) in wastewater can be efficiently immobilized by the oxidized CF, and the immobilized U(VI) can be further concentrated and converted into Na₂U₂O₇ or U₃O₈ by a simple sintering step. These findings presented in this work suggest the potential of using oxidized CF for further treatment of low concentration wastewater containing U(VI).

Adsorption properties of β-cyclodextrin modified hydrogel for methylene blue

With the development of dye and printing, production wastewater has become one of the most primary pollution sources of water and soil pollution. Most of the dyes are toxic substances, which have the "three-way" effect of carcinogenic, teratogenic and mutagenic. Therefore, it is a very difficult but significant issue to deal with the dye in the wastewater. Here, we report a study on low-cost, high-capacity hydrogels that remove water-soluble dyes. The hydrogel is prepared by crosslinking the β-cyclodextrin and functional monomer: acrylamido and 2-acrylamide-2-methylpropane sulfonic acid by aqueous solution polymerization, meanwhile, alkaline hydrolysis is also an important step for adsorption performance. After alkaline hydrolysis, the amide and sulfonic groups in the hydrogel were converted into carboxylate and sulfonate, which was beneficial to the adsorption of cationic dyes. This polymer could remove 96.58% methylene blue (400 mg/L) and only requires 0.02 wt%. Its maximum adsorption capacity for methylene blue could reach 2638.22 mg/g under equilibrium condition. It is the most powerful adsorbent used to treat dye wastewater, according to the report. It also provides some references for hydrogel treatment of dye wastewater.

Characterization and valuable use of Calotropis gigantea seedpods as a biosorbent of methylene blue

In this work, powdered Calotropis gigantea seedpods were characterized and used as biosorbents of methylene blue dye from aqueous solution. FT-IR spectroscopy demonstrated functional groups characteristics of cellulose. Steric exclusion chromatography donated an average molecular weight of 230 kg/mol of the biopolymer. The polymolecularity index value (1.95) proved the good homogeneity of the polysaccharide. Scanning electron microscopy features displayed a homogenous morphology and porous structure. X-ray diffraction patterns showed peaks characteristics of cellulose and non-cellulose compositions. Thermogravimetric analysis/differential thermal analysis displayed exothermal decompositions at 316.9 °C and 456 °C. The maximum biosorption capacity of methylene blue was 88.36 mg/g at pH = 6, time = 60 min, and T = 21 °C. The level was comparable to some other studied agricultural wastes. The adsorption mechanism followed pseudo-second-order and Freundlich models. As it is abundant, available, low-cost, and easily recovered from solution, C. gigantea seedpods could be used as an effective biomaterial for the removal of organic pollutants from contaminated waters. Novelty statement: An abundant, available, and low-cost Calotropis gigantea seedpod was used, for the first time, as an effective biomaterial for the biosorption of organic pollutants. The biosorption level was found to be comparable to some other agricultural wastes studied previously in the literature.

Anaerobic fermentation treatment improved Cd2+ adsorption of different feedstocks based hydrochars

Hydrothermal carbonization technology has attracted wide attention in recent years owing to its advantages, e.g., high yield and clean production, compared with traditional pyrolysis. Anaerobic fermentation (AF) is a new method to modify carbon materials, which may improve the surface properties of hydrochar (HC). To explore whether AF has effects on different feedstocks based HCs, two kinds of HCs derived from wheat straw and poplar sawdust were treated with AF for different time in this study. By comparing the changes in physicochemical properties of anaerobic fermentative hydrochars (AFHCs), adsorption behaviors of Cadmium (Cd²⁺) on AFHCs were evaluated. The results showed that the surface electrical characteristics, specific surface area, and oxygen-containing functional groups of HCs improved significantly after AF treatment, which confirmed our hypothesis that AF is suitable for improving the adsorption of different feedstocks based HCs. The adsorption capacity of Cd²⁺ on AFHCs was significantly enhanced by a 3.1-3.4 times increase after AF treatment. The effect of AF treatment on wheat straw hydrochar (WHC) was more evident than poplar sawdust hydrochar (SHC). WHCs treated with AF own higher adsorption capacity of Cd²⁺, which was attributed to the higher negative charge, more exchangeable cations, and more oxygen-containing functional groups. The adsorption process was found to be a spontaneous endothermic reaction dominated by chemisorption and controlled by electrostatic attraction, ion exchange, functional groups complexation, and π-bonding coordination. These results were contributed to understanding the modification of HC by AF and its application in heavy metal pollution remediation.

Fabrication of mechanical robust keratin adsorbent by induced molecular network transition and its dye adsorption performance

Keratin-based adsorbents showed a great potential in environmental pollution remediation. However, fabrication of keratin adsorbent with an excellent performance remains a challenging issue mainly because of its poor mechanical properties. In this research, mechanical-reinforced keratin adsorbent was designed and engineered at mesoscopic scale by the induced molecular network transition method. It was found that the β-crystallite structure of silk fibroin template could induce the transformation of free unfolded molecular chains of keratin to β-sheet conformation in the keratin adsorbent and further resulted in the controllable manipulation of the mechanical properties of the adsorbent. The prepared keratin adsorbent exhibited an excellent adsorption performance for Reactive Black 5 (RB5). The q_e and removal efficiency for RB5 by the adsorbent could reach as high as 550 mg/g and 95.3%, respectively. The adsorbent exhibited an excellent regeneration and recycle performance due to its mechanical reinforcement. The facile molecular network-induced reconstruction strategy is both straightforward and effective for fabricating mechanical robust adsorbent for environmentally pollutant remediation. Graphical abstract.

A Cellulosic Fruit Derived from Nerium oleander Biomaterial: Chemical Characterization and Its Valuable Use in the Biosorption of Methylene Blue in a Batch Mode

Cellulose substrate waste has demonstrated great potential as a biosorbent of pollutants from contaminated water. In this study, Neriumoleander fruit, an agricultural waste biomaterial, was used for the biosorption of methylene blue from synthetic solution. Fourier-transform infrared (FTIR) spectroscopy indicated the presence of the main absorption peak characteristics of cellulose, hemicellulose, and lignin compositions. X-ray diffraction (XRD) pattern exhibited peaks at 2θ = 14.9° and 2θ = 22°, which are characteristics of cellulose I. Scanning electron microscopy (SEM) showed a rough and heterogeneous surface intercepted by some cavities. Thermogravimetric analysis (TGA) showed more than a thermal decomposition point, suggesting that Nerium fruit is composed of cellulose and noncellulosic matters. The pH_pzc value of Nerium surface was experimentally determined to be 6.2. Nerium dosage, pH, contact time, dye concentration, and temperature significantly affected the adsorption capacity. The adsorption capacity reached 259 mg/g at 19 °C. The mean free energy ranged from 74.53 to 84.52 KJ mol⁻¹, suggesting a chemisorption process. Thermodynamic parameters define a chemical, exothermic, and nonspontaneous mechanism. The above data suggest that Nerium fruit can be used as an excellent biomaterial for practical purification of water without the need to impart chemical functionalization on its surface.

Effects of different agronomic practices on the selective soil properties and nitrogen leaching of black soil in Northeast China

Considering the large amount and high frequency application of concentrated fertilizer nitrogen in the Black Soil Region of Northeast China, the current laboratory/field simulation study aimed to explore the pollution risk of added nitrogen in black soil to groundwater and identify effective measures to prevent and control soil nitrogen leaching with an undisturbed soil column. The results showed that the saturated nitrogen adsorption capacities increased by 1.7%, 7.7% and 18.5% in ploughing, impervious agent (starch grafted polyacrylic acid) addition, and corn straw returning treatments, respectively, relative to the control (no-till). When the collection volume of the leaching solution reached the experimental maximum (4,000 mL), the total amount of nitrogen leaching from the control soil column (i.e., the no-tillage treatment) accounted for more than 50% of the added nitrogen, indicating a great risk of nitrogen pollution in groundwater. Compared with the no-tillage treatment, the amount of nitrogen leaching from the ploughing treatment increased insignificantly, and the amount of nitrogen leaching in the following spring in the corn straw returning treatment increased by 11.2%. The amount of nitrogen leaching decreased by 12.5% in the soil sampled in autumn of the second year. The total amount of nitrogen leaching in the soil with impervious agents decreased by 40.1%. Therefore, the permeability-reducing agent could significantly reduce underground water pollution risk posed by nitrogen leaching.

Equilibrium Study, Modeling and Optimization of Model Drug Adsorption Process by Sunflower Seed Shells

The adsorption capacity of the medication methylthioninium chloride (MC) from aqueous solution onto sunflower seed shells (SSS), a low cost and abundant alternative adsorbent, was investigated in a batch system. The surface properties of the adsorbent were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), specific surface area (by using the Brunauer–Emmett–Teller equation), the liquid displacement method and pHPZC. The ability of SSS to remove the medication was assessed through kinetic, thermodynamic and equilibrium investigations. The adsorption efficiency of the SSS adsorbent for the removal of MC was evaluated considering the effects of its concentration, temperature, adsorption contact time, and the pH of the medium. The results obtained from the kinetic and isotherm studies show that the adsorption of the MC on SSS follows pseudo-second-order kinetics (R² > 0.99) and the Temkin isotherm model (R² = 0.97), respectively. The thermodynamic study showed that the adsorption was endothermic and spontaneous, according to its physisorption mechanism. The mathematical modeling of this process was carried out by using the surface response methodology of Box–Behenken. It was possible to deduce a statistically reliable regression equation that related the adsorption yield to the chosen operating parameters, that is, the initial MC concentration, the adsorbent dosage and the pH. Analysis of the variance indicated that the most influential parameters were the SSS dosage, the pH and their interaction and showed the optimal values for ensuring the best adsorption capacity of 95.58%.

Potential of siltstone and its composites with biochar and magnetite nanoparticles for the removal of cadmium from contaminated aqueous solutions: Batch and column scale studies

The present study is the first attempt to evaluate the pilot and batch scale adsorption potential of siltstone (SS) and its nanocomposites with biochar (EDB/SS), magnetite nanoparticles (MNPs/SS) and MNPs/EDB/SS for Cd removal from contaminated water. The SS, EDB/SS, MNPs/SS and MNPs/EDB/SS were characterized with FTIR, XRD, BET, SEM, TEM, TGA and point of zero charge (PZC). The effects of adsorbent dosage, contact time, initial Cd concentration, pH and presence of competing ions were evaluated on the Cd removal and its adsorption. The order for Cd removal was: MNPs/EDB/SS > MNPs/SS > EDB/SS > SS (95.86-99.72% > 93.10-98.5% > 89.66.98-98.40% > 74.90-90%). Column scale experiments yielded maximum retention (95%) of Cd even after 2 h of injection at 100 mg Cd/L. The exhausted SS, EDB/SS, MNPs/SS and MNPs/EDB/SS were reused without losing significant adsorption potential. Similarly, maximum Cd adsorption (117.38 mg/g) was obtained with MNPs/EDB/SS at dose 1.0 g/L. The results revealed that coexisting cations reduced the Cd removal due to competition with Cd ions. The experimental results were better explained with Freundlich isotherm model and pseudo 2nd order kinetic models. The results revealed that SS and its composites can be used efficiently for the removal of Cd from contaminated water.

Synthesis and cationic dye biosorption properties of a novel low-cost adsorbent: coconut waste modified with acrylic and polyacrylic acids

Coconut waste (CW), a novel, low cost adsorbent, has been utilized for the removal of methylene blue (MB) dye from an aqueous solution. CW was chemically modified with acrylic (AcA) and polyacrylic acids (PAcA) using different modification methods, such as esterification with AcA, chemically grafting of PAcA, and plasma-enhanced chemical vapor deposition (PECVD) coating with PAcA. CW-based adsorbents were used in the experiments to study MB adsorption probability, and their activities were compared. The adsorption behavior of MB onto the adsorbents was investigated with respect to parameters such as sorbent dosage (0.5-4 g/L), pH (2-10), initial dye concentration (50-250 mg/L), and temperature (22-65 °C). The time taken of AcA modified CW (CW-AcA), PAcA-grafted CW (CW-PAcA_grafted), and PAcA-coated CW (CW-PAcA_coated) for the removal of 94.6%, 97.7%, and 91.0% of MB from 50 mg/L of dye solution is 180 min. Characterization of CW-based adsorbents was achieved using SEM, XRD, BET, XPS, and FT-IR analysis. The adsorption fitted the Langmuir model, and the adsorption kinetics were consistent with a pseudosecond-order kinetics model. The results obtained from the maximum adsorption capacity (q_max) for AcA-, PAcA_coated-, and PAcA_grafted-CWs were 138.88, 136.98, and 98.03 mg/g at adsorbent dose of 0.1 g/50 mL for initial dye concentration of 200 mg/L, 22 ± 1 °C, and pH 10:10:8.

3D-Printed metal-organic frameworks within biocompatible polymers as excellent adsorbents for organic dyes removal

Three-dimensional (3D) printing technique has received exceptional global attention as it can create a myriad of high-resolution architectures from digital models. In the present study, 3D-printed metal-organic frameworks (MOFs) were shaped into several geometries via direct ink writing, which overcomes the instability and high-pressure drop of powdery MOF during the flow of gas or liquid streams. The inclusion of a blend of calcium alginate and gelatin (CA-GE) as biocompatible binder allowed for easy writing and an enhanced mechanical property. Besides, it was found that the printing geometry (square, hexagon, and circle), MOF loading amount, and MOF size also greatly influenced the adsorptive performance. For instance, the methylene blue adsorption efficiency of CA-GE scaffolds without MOF was only 43.6%, while the printed MOF/CA-GE sample exhibited 99.8% adsorption efficiency at 20 min. Both the inherent microporous structure of MOFs and meso/macroporous structures of the 3D matrix contributed to the excellent adsorption properties towards a variety of organic dyes and their mixtures. Furthermore, the 3D-printed adsorbents can be easily regenerated in dilute acid solution and reused for at least 7 times without performance loss. In contrast, the powdery MOF can only be repeatedly used for at most 2 times.

Fabrication and investigation of gold (III) ion-imprinted functionalized silica particles

Au (III) ion-imprinted mesoporous silica particles (Au-Si-Py) was manufactured by the condensation reaction of (3-Aminopropyl)triethoxysilane (AT)and 2-pyridinecarboxaldehyde (Py). The obtained AT-Py Schiff base ligand was then coordinate with the template gold ions and the polymerizable gold-complex was allowed to gel in presence of tetraethoxysilane (TEOS) and then the coordinated gold ions were leached out of the obtained silica matrix using acidified thiourea solution. During the synthetic steps, the obtained materials were investigated utilizing advanced instrumental and spectral methods. Moreover, the morphological structure of both Au (III) ions imprinted Au-Si-Py and non-imprinted NI-Si-Py silica particles were visualized using scanning electron microscope (SEM). Various adsorption experiments had been carried out using both Au-Si-Py and NI-Si-Py to examine their potential for selective extraction of gold ions under different conditions.

Adsorption of methylene blue and Cd(II) onto maleylated modified hydrochar from water

A new carboxylate-functionalized hydrochar (CFHC) was successfully prepared by reaction of hydrochar with maleic anhydride under solvent-free conditions and followed by deprotonating carboxyl group of hydrochar with NaHCO₃ solution. CFHC was characterized using X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), zeta potential, Brunauer-Emmett-Teller surface area (BET) and Fourier-transform infrared spectroscopy (FTIR), and its adsorption properties and mechanisms to methylene blue (MB) and Cd(II) were investigated using the batch method. The isotherm adsorption data were accorded with Langmuir model and the maximum uptakes were 1155.57 and 90.99 mg/g for MB and Cd(II) at the temperature of 303 K, respectively. The joint analysis of batch experiments and characterizations of hydrochar confirmed the π-π interaction was accompanied by electrostatic interaction and hydrogen bond for MB adsorption, while the surface complexation and ion exchange were predominant mechanisms for Cd(II) adsorption. Therefore, a highly effective adsorbent CFHC prepared by a simple and environmentally friendly solid-phase synthesis is a promising candidate for wastewater treatment.

Preparation of an antibacterial chitosan-coated biochar-nanosilver composite for drinking water purification

Microbial contamination has evolved as a life-threatening problem afflicting people due to various diseases caused by pathogenic bacteria in drinking water. Thus developing novel antibacterial materials is an urgent need. Herein, a chitosan (CTS)/ biochar-nanosilver (C-Ag) antibacterial composite was prepared by a method of CTS-coated on C-Ag obtained through a facile high-temperature carbonization process using corn straw as the carbon substrate. The results from FT-IR, XRD, SEM and TG-DSC revealed that the biochar loading spherical silver nanoparticles was coated with CTS in the composite. The antibacterial activity of the CTS/C-Ag composite was investigated using the plate counting method with Escherichia coli (E. coli), and the results suggest that the composite exhibited excellent antibacterial activity against E. coli. In this application study, it was proven that the CTS/C-Ag composite exhibits sustainable antibacterial activity and good reusability for drinking water. Therefore, the CTS/C-Ag composite has potential application in drinking water treatment.

Sorption of methyl orange from aqueous solution by protonated amine modified hydrochar

The protonated amine modified hydrochar (PAMH) was synthesized by etherification, amination and protonated reaction with hydrochar, which was enriched with abundant protonated amine for methyl orange (MO) removal. PAMH was characterized by elemental analysis, scanning electron microscopy, nitrogen adsorption-desorption measurement, zeta potential and Fourier transform infrared. The sorption of MO from aqueous solution by PAMH was investigated by batch experiments. The results showed that sorption of MO was significantly influenced by the initial concentration of MO, temperature, contact time and ionic strength, while hardly affected by pH values ranging from 4 to 11. The pseudo-second-order and Langmuir equations were able to depict sorption kinetics and sorption isotherms, respectively. Thermodynamic analysis indicated that the sorption behavior was thermopositive and spontaneous. The maximum theoretical uptake computed by the Langmuir equation was 909.09 mg·g^-1 at 303 K, which suggested that PAMH was an effective sorbent to eliminate anionic dye from aqueous solution.

Superior amine-rich gel adsorbent from peach gum polysaccharide for highly efficient removal of anionic dyes

Herein, we demonstrated the potential of peach gum polysaccharide-based amine-rich gel (ARG) as an efficient adsorbent for removal of anionic dyes from water. The adsorption performance of ARG was systematically studied by choosing methyl orange (MO) and amaranth (ART) as representative anionic dyes. The effects of various parameters such as pH, ionic strength, temperature, initial dye concentration and contact time on the adsorption were investigated. The ARG exhibited superior adsorption selectivity and stable adsorption behaviors against variation of pH and ionic strength for anionic dyes. Adsorption process reached equilibrium within 10 min and showed good correlation with pseudo-second-order kinetic model and Langmuir isotherm. The adsorption capacity of ARG for MO and ART can reach 1949.5 and 1082.2 mg g^-1, respectively. Based on its sustainable characteristic, low cost and excellent adsorption property, the ARG holds great promise for utilizing as an adsorbent for practical water treatment applications.

A New Porous Hybrid Material Derived From Silica Fume and Alginate for Sustainable Pollutants Reduction

In this work a new mesoporous adsorbent material obtained from a natural, high abundant raw material and a high volume industrial by-product is presented. The material is consolidated by the gelling properties of alginate and by decomposition of sodium-bicarbonate controlled porosity at low temperatures (70–80°C) at different scale lengths. The structural, thermal, and morphological characterization shows that the material is a mesoporous organic-inorganic hybrid. The material is tested as adsorbent, showing high performances. Methylene blue, used as model pollutant, can be adsorbed and removed from aqueous solutions even at a high concentration with efficiency up to 94%. By coating the material with a 100 nm thin film of titania, good photodegradation performance (more than 20%) can be imparted. Based on embodied energy and carbon footprint of its primary production, the sustainability of the new obtained material is evaluated and quantified in respect to activated carbon as well. It is shown that the new proposed material has an embodied energy lower than one order of magnitude in respect to the one of activated carbon, which represents the gold standards. The versatility of the new material is also demonstrated in terms of its design and manufacturing possibilities In addition, this material can be printed in 3D. Finally, preliminary results about its ability to capture diesel exhaust particulate matter are reported. The sample exposed to diesel contains a large amount of carbon in its surface. At the best of our knowledge, this is the first time that hybrid porous materials are proposed as a new class of sustainable materials, produced to reduce pollutants in the wastewaters and in the atmosphere.

A facile route to magnetic mesoporous core–shell structured silicas containing covalently bound cyclodextrins for the removal of the antibiotic doxycycline from water

The excessive use of antibiotics has led to various environmental problems; the control and separation of these antibiotics are important in environmental science. Herein, a novel mesoporous nanocomposite, Fe₃O₄@SiO₂@mSiO₂-CD, has been synthesized for the removal of antibiotic compounds from aqueous media. The well-designed nanocomposite is composed of β-cyclodextrin functionalized surfaces, ordered mesoporous silica shells with large radially oriented mesopores, and nonporous silica-coated magnetic cores (Fe₃O₄). The synergistic action of both the mesoporous structure and the accessible cavity of β-cyclodextrin ensures the good adsorption of doxycycline. Furthermore, the Fe₃O₄@SiO₂@mSiO₂-CD nanocomposite can be collected, separated and easily recycled from aqueous solution using an external magnet.

The controllable synthesis of a core–shell structured mesoporous organic–inorganic hybrid nanocomposite, Fe₃O₄@SiO₂@mSiO₂-CD, which demonstrates good adsorption of doxycycline.

Assessment of fish scales waste as a low cost and eco-friendly adsorbent for removal of an azo dye: Equilibrium, kinetic and thermodynamic studies

In this study, AB113 dye was successfully sequestered using a novel adsorbent made of mixed fish scales (MFS). The influence of adsorbent dosage, initial pH, temperature, initial concentration and contact time on the adsorption performance was investigated. The surface chemistry and morphology of the adsorbent were examined by FTIR, TGA and SEM. Amides, phosphate and carbonate groups were evidently responsible for the high affinity of MFS towards the dye. The adsorption equilibrium and kinetic were well described by Langmuir and pseudo-second-order models, respectively. The maximum adsorption capacities of MFS were 145.3-157.3mg/g at 30-50°C. The adsorption of AB113 dye onto the adsorbent was exothermic and spontaneous as reflected by the negative enthalpy and Gibbs energy changes. The results support MFS asa potential adsorbent for AB113 dye removal.