Impact of temperatures on microbial community structures of sewage sludge biological hydrolysis

Effects of tomato straw fermentation on nutrients and bacterial community structure

Unsustainable straw treatment methods detrimentally affect the environment and ecology. Aerobic fermentation (AE) and anaerobic fermentation (AN) are environmentally friendly treatments that better utilise straw resources. In this study, high-throughput sequencing was used to investigate the effects of AE and AN on nutrient content and microbial community structure during tomato straw fermentation. Nitrate nitrogen, available phosphorus, available potassium, and fulvic acid contents following AE were 1250.04 mg/kg, 80.34 %, 161.39 %, and 49.31 %, respectively, which were higher than those following AN. Ammonium nitrogen, humic acid, and humic substance levels following AN were 309.07 %, 31.18 %, and 17.38 %, respectively, which were higher than those following AE. Firmicutes (24.76 %) and Actinobacteria (12.93 %) were more abundant following AE, whereas Proteobacteria (33.82 %) and Bacteroidetes (33.82 %) exhibited higher abundance following AN. AE more effectively eliminated pathogenic bacteria (22.01%-0.26 %) and encouraged stronger interactions between dominant bacterial genera. Redundancy and Mantel test analyses revealed that electrical conductivity and temperature were the most important environmental factors affecting bacterial communities in AE and AN, respectively. AE had a stronger effect on effective nutrient release from tomato straw, implying its greater application potential as a fertiliser. Overall, our study provides a theoretical basis for the optimisation of fermentation methods and processes.

Enhanced hydrolysis of waste activated sludge and recovery of volatile fatty acids: Performance and mechanistic analysis of synergistic treatment with sodium citrate and calcium oxide

Anaerobic fermentation has emerged as a promising method of transforming waste activated sludge into high-value products (e.g., volatile fatty acids (VFAs)). This work developed sodium citrate (SC)-calcium oxide (CaO) pretreatment to accelerate the production of VFAs by enhancing sludge solubilization and disintegration of extracellular polymeric substances. The results showed that co-pretreatment with 0.25 g/g TSS of SC and 0.05 g/g TSS of CaO effectively boosted VFAs accumulation (5823.3 mg COD/L), which was 12.2 times higher than the Control group. SC-CaO pretreatment enhanced hydrolysis and acidogenesis by providing ample organic substrates, thereby promoting the growth of hydrolytic and acidogenic bacteria. Additionally, the fermentation broth resulting from co-pretreatment exhibited lower phosphorus concentration and higher biodegradability. Economic analysis confirmed that the combined pretreatment is cost-effective. This work provides a viable strategy for enhancing high-value product recovery from sludge.

Boosting Volatile fatty acids (VFAs) production in fermentation microorganisms through genes expression control: Unraveling the role of iron homeostasis transcription factors

Iron (Fe0, Fe (II), and Fe (III)) has been previously documented to upregulate the expression of key genes, enhancing the production of volatile fatty acids (VFAs) to achieve waste/wastewater resource recovery. However, the precise mechanism by why iron influences gene expression remains unclear. This study applied iron-assisted fermentation systems to explore the behind enhancing mechanism by constructing regulon networks among genes, microbes, and transcription factors. In iron-conditioned systems, a significant enhancement in VFAs production and upregulation of genes expression (1.19-3.92 folds) related to organic conversion and the electron transfer chain was observed. Besides, gene co-expression network and Procrustes analysis identified ten hub transcription factors (e.g., arsR, crp, iscR, perR) and their major contributors (genus) (e.g., Paludibacter, Acinetobacter, Tolumonas). Further analysis suggested that most of hub transcription factors were implicated in iron homeostasis regulation, which speculated that the induced iron homeostasis transcription factors probably effectively regulated the expression of genes encoding enzymes involving in VFAs production and electron transfer of functional microbes, in the case of Paludibacter, Acinetobacter, and Tolumonas while regulating the iron homeostasis, resulting in the efficient production of VFAs in iron-conditioned systems. This study might contribute to an enhanced understanding of the underlying genetic mechanisms by why iron influences gene expression regulation of microbes, which also provides a genetic theoretical basis for improving system VFAs production and resource recovery.

Temperature-Driven Activated Sludge Bacterial Community Assembly and Carbon Transformation Potential: A Case Study of Industrial Plants in the Yangtze River Delta

Temperature plays a critical role in the efficiency and stability of industrial wastewater treatment plants (WWTPs). This study focuses on the effects of temperature on activated sludge (AS) communities within the A2O process of 19 industrial WWTPs in the Yangtze River Delta, a key industrial region in China. The investigation aims to understand how temperature influences AS community composition, functional assembly, and carbon transformation processes, including CO2 emission potential. Our findings reveal that increased operating temperatures lead to a decrease in alpha diversity, simplifying community structure and increasing modularity. Dominant species become more prevalent, with significant decreases in the relative abundance of Chloroflexi and Actinobacteria, and increases in Bacteroidetes and Firmicutes. Moreover, higher temperatures enhance the overall carbon conversion potential of AS, particularly boosting CO2 absorption in anaerobic conditions as the potential for CO2 emission during glycolysis and TCA cycles grows and diminishes, respectively. The study highlights that temperature is a major factor affecting microbial community characteristics and CO2 fluxes, with more pronounced effects observed in anaerobic sludge. This study provides valuable insights for maintaining stable A2O system operations, understanding carbon footprints, and improving COD removal efficiency in industrial WWTPs.

The Impact of Environmental Gaseous Pollutants on the Cultivable Bacterial and Fungal Communities of the Aerobiome

Understanding air microbial content, especially in highly polluted urban areas, is crucial for assessing its effect on human health and ecosystems. In this context, the impact of gaseous pollutants on the aerobiome remains inconclusive due to a lack of studies separating this factor from other contaminants or environmental factors. In this study, we aimed to experimentally assess the influence of contrasting concentrations of atmospheric gaseous pollutants as isolated variables on the composition of the aerobiome. Our study sites were contrasting Air Quality Index (AQI) sites of the Metropolitan Region of Chile, where nitric oxide (NO) was significantly lower at the low-AQI site than at the high-AQI site, while ozone (O3) was significantly higher. Cultivable aerobiome communities from the low-AQI site were exposed to their own pollutants or those from the high-AQI site and characterized using high-throughput sequencing (HTS), which allowed comparisons between the entire cultivable communities. The results showed increased alpha diversity in bacterial and fungal communities exposed to the high-AQI site compared to the low-AQI site. Beta diversity and compositional hierarchical clustering analyses revealed a clear separation based on NO and O3 concentrations. At the phylum level, four bacterial and three fungal phyla were identified, revealing an over-representation of Actinobacteriota and Basidiomycota in the samples transferred to the high-AQI site, while Proteobacteria were more abundant in the community maintained at the low-AQI site. At the functional level, bacterial imputed functions were over-represented only in samples maintained at the low-AQI site, while fungal functions were affected in both conditions. Overall, our results highlight the impact of NO and/or O3 on both taxonomic and functional compositions of the cultivable aerobiome. This study provides, for the first time, insights into the influence of contrasting pollutant gases on entire bacterial and fungal cultivable communities through a controlled environmental intervention.

Biochar-enhanced anaerobic mixed culture for biodegradation of 1,2-dichloroethane: Microbial community, mechanisms, and techno-economics

While anaerobic digestion (AD) has been employed for the degradation of chlorinated aliphatic hydrocarbons, the associated digester performance might suffer from volatile fatty acids accumulation, insufficient substrate-microbes interaction, and lower biogas yields. To overcome these limitations, this study is the first to augment the hydrocarbon-degrading microbial capacities by adding agricultural waste-based biochar to the digestion medium. 1,2-dichloroethane (1,2-DCA) was selected as the target pollutant because it is discharged in large quantities from oil refining, petrochemical, and chemical industries, causing serious environmental and human health concerns. A multi-chamber anaerobic reactor (MAR) was operated at a 1,2-DCA loading rate of 1.13 g/L/d, glucose dosage (as an electron donor) range of 200-700 mg/L, and hydraulic retention time of 11.2 h, giving dechlorination = 32.2 ± 6.9% and biogas yield = 210 ± 30 mL/g CODremoved. These values increased after biochar supplementation (100 mg/g volatile solids, VS, as an inoculum carrier) up to 60.2 ± 11.5% and 290 ± 40 mL/g CODremoved, respectively, owing to the enhancement of dehydrogenase enzyme activities. Burkholderiales (15.3%), Clostridiales (2.3%), Bacteroidales (3.5%), Xanthomonadales (3.3%), and Rhodobacterales (6.1%) involved in 1,2-DCA degradation were dominant in the reactor supplemented with biochar. It's suggested that biochar played a major role in facilitating the direct interspecies electron transfer (DIET) between syntrophic bacteria and methanogens, where chloride, ethylene glycol, and acetate derived from 1,2-DCA dechlorination could be further used to promote methanogenesis and methane production. The synergetic effect of adsorption and dechlorination towards 1,2-DCA removal was validated at various biochar dosages (50-120 mg/g) and 1,2-DCA concentrations (50-1000 mg/L). The techno-economic results showed that the cost of treating 1,2-DCA-laden discharge (100 m3/d) by the MAR module could be 0.83 USD/m3 with a payback period of 6.24 years (NPV = 2840 USD and IRR = 10%), retrieving profits from pollution reduction (9542 USD/yr), biogas selling (10418 USD/yr), and carbon credit (10294 USD/yr).

Valorization of organic carbon in primary sludge via semi-continuous dark fermentation: First step to establish a wastewater biorefinery

In this study, lab-scale, bench-scale, and pilot-scale experiments were carried out to optimize short-chain fatty acids production from primary sludge. Batch tests showed the requirement of short retention times and semi-continuous operation mode showed a plateau of maximum daily productivity at 36-hours hydraulic retention time with minimal methanation. Optimization from pH 5 to pH 10 at 36 h-hydraulic retention time under long-term semi-continuous operating mode revealed that production of short-chain fatty acids was pH dependent and highest yields could be achieved at pH 7 by establishing optimum redox conditions for fermentation. Pilot-scale experiments at 32 °C showed that daily productivity (3.1 g∙Lreactor-1∙dHRT-1) and yields (150 mg∙gVS-1; OLR = 21 gVS∙Lreactor-1∙dHRT-1; pH 7) of short-chain fatty acids could be significantly improved, specifically for acetic and propionic acids. From these results, a robust dark fermentation step for recovery of valuable products from the solids treatment step in a biorefinery can be achieved.

The performance and microbial response of zero valent iron alleviating the thermal-alkaline stress and enhancing hydrolysis-acidification of primary sludge

The biological thermal-alkaline hydrolysis-acidification (BTAHA) could promote sludge disintegration, which was conducive to producing volatile fatty acids (VFAs). However, high temperature and strong alkali could reduce the BTAHA effluent quality. Because high temperature denatures proteins and significantly changes the material and energy metabolism of bacteria, while strong alkali inhibits fermentation microorganisms (especially acid-producing microorganisms). This study investigated the internal mechanism of zero valent iron (ZVI) and magnetite (Mag.) alleviating temperature and alkali stress and improving the quality of hydrolysis-acidification effluent. At pH 7-10, compared with the control and magnetite, ZVI increased the average effluent VFAs by 24.0%-40.1% and 11.6%-18.1%, respectively. At pH 9, ZVI could provide an ecological niche for acidifying bacteria that preferred neutral and weakly alkaline conditions, with a 49.8% proportion of VFAs to soluble chemical oxygen demand (SCOD). At pH 12, the fluorescence intensity ratio of easy to difficult biodegradable organic matter in control, RMag., and RZVI were 0.63, 0.62, and 1.31, respectively. It indicated ZVI effectively alleviated high temperature and strong alkali stress. This study provides a reference for improving the quality of BTAHA effluent.

Optimizing SCND with carbon-rich hydrolysates from typical organic wastes: Material composition, augmentation performance, microbiome response, and life cycle impact

The rapid growth of production and consumption has led to severe environmental pollution, creating a major challenge to achieving the United Nations' sustainable development goals (SDGs). To address it, recycling of organic wastes into value-added products is a possible solution. In this work, four typical organic wastes including sewage sludge (SS), chicken manure (CM), food waste (FW), and corn straw (CS) were employed to produce hydrolysates augmenting shortcut nitrification-denitrification (SCND) for nitrogen depletion in wastewater. The hydrolysates were carbon-rich, with total COD (TCOD), soluble COD (SCOD), and volatile fatty acids (VFA) concentrations ranging from 32.5 to 102.7, 5.7 to 48.4, and 2.0-16.5 mg/L, respectively. The most effective nitrogen depletion was obtained in units supplemented with CM and FW hydrolysates, which had reduced average NH₃-N concentrations and near-zero TN removal failure rates under legal requirements. The microbial community analysis demonstrated that various functional bacteria from phylum to genus level were detected in all scenarios, which was corroborated by abundant genetic functions involved in nitrogen metabolism. Further, life cycle assessment revealed negative environmental impact on all categories, with an exception of eutrophication potential (EP) with negative values (∼-0.04 kg Phosphate eq.), allowing positive net environmental benefit (NEB). Operational cost analysis revealed that CM and FW are more effective but costlier than SS and CS. Together, these results indicate that, after hydrolysis, organic wastes can be efficient stimulant augmenting SCND performance for nitrogen depletion in wastewater, benefiting the overall environmental impact.

Sewage sludge pretreatment: current status and future prospects

Sewage sludge is regarded by wastewater treatment plants as problematic, from a financial and managerial point of view. Thus, a variety of disposal routes are used, but the most popular is methane fermentation. The proportion of macromolecular compounds in sewage sludges varies, and substrates treated in methane fermentation provide different amounts of biogas with various quality and quantity. Depending on the equipment and financial capabilities for methane fermentation, different methods of sewage sludge pretreatment are available. This review presents the challenges associated with the recalcitrant structure of sewage sludge and the presence of process inhibitors. We also examined the diverse methods of sewage sludge pretreatment that increase methane yield. Moreover, in the field of biological sewage sludge treatment, three future study propositions are proposed: improved pretreatment of sewage sludge using biological methods, assess the changes in microbial consortia caused with pretreatment methods, and verification of microbial impact on biomass degradation.

Thermo-alkaline pretreatment of excess sludge: Effects of temperature on volatile fatty acids accumulation and microbial community

In order to explore the role of thermal-alkaline pretreatment temperatures (TAPT) in sludge fermentation and the microbial characteristics, five groups (100, 120, 140, 160 °C and control group) were set up and the results showed that the increasing TAPT promoted the dissolution of soluble chemical oxygen demand (SCOD) and VFAs, but had slight influence on the release of NH₄⁺-N and PO₄^3--P. What's more, when it was 120 °C, the SCOD dissolution was comparable to that at 160 °C. Overall, 120 °C was the optimal condition, corresponding to the fact that the maximum release of SCOD was 8788.74 mg/L (2.63 times of the control group), the maximum dissolution of VFAs was 4596 mg/L (about 1.28 times of the control group). The trend of C/N was not significant. High-throughput sequencing showed that Firmicutes and Actinobacteriota were enriched with the temperature increasing, while Proteobacteria and Chloroflexi did not change significantly. Firmicutes was in a stable dominant position. Temperature conditions brought about significant changes in microbial interspecific interaction. Carbohydrate and amino acids had the highest metabolic abundance, especially at 120 °C group. The change rule of amino acid metabolism was similar to that of lipid metabolism, and the abundance of energy metabolism gradually increased with temperature. The protein metabolism was greatly affected by temperature. This study revealed the effect of microbial mechanism of TAPT on the sludge acid production efficiency.

Mitigation of N2O emissions via enhanced denitrification in a biological landfill leachate treatment using external carbon from fermented sludge

The effects of an external carbon source (C-source) on the mitigation of N₂O gas (N₂O_(g)) emissions from landfill leachate were investigated via enhanced denitrification using anaerobically fermented sewage sludge. Anaerobic fermentation of sewage sludge was conducted under thermophilic conditions with progressively increasing organic loading rates (OLR). Optimal conditions for fermentation were determined based on the efficiency of hydrolysis and the concentrations of sCOD and volatile fatty acids (VFAs) as follows: at an OLR of 40.48 ± 0.77 g COD/L·d with 1.5 days of solid retention time (SRT), 14.68 ± 0.59% of efficiency of hydrolysis, 14.42 ± 0.30 g sCOD/L and 7.85 ± 0.18 g COD/L of VFAs. Analysis of the microbial community in the anaerobic fermentation reactor revealed that degradation of sewage sludge might be potentially affected by proteolytic microorganisms producing VFAs from proteinaceous materials. Sludge-fermentate (SF) retrieved from the anaerobic fermentation reactor was used as the external C-source for denitrification testing. The specific nitrate removal rate (K_NR) of the SF-added condition was 7.54 mg NO₃^-N/g VSS·hr, which was 5.42 and 2.43 times higher than that of raw landfill leachate (LL) and a methanol-added condition, respectively. In the N₂O_(g) emission test, the liquid phase N₂O (N₂O-^N_(l)) of 20.15 mg N/L was emitted as N₂O_(g) of 19.64 ppmv under only LL-added condition. On the other hand, SF led to the specific N₂O_(l) reduction rate (K_N2O) of 6.70 mg N/g VSS hr, resulting in mitigation of 1.72 times the N₂O_(g) emission compared to under the only-LL-added condition. The present study revealed that N₂O_(g) emissions from biological landfill leachate treatment plants can be attenuated by simultaneous reduction of NO₃^-N and N₂O_(l) during enhanced denitrification via a stable supply of an external C-source retrieved from anaerobically fermented organic waste.

Quorum quenching enhanced methane production in anaerobic systems - performance and mechanisms

In our previous study, quorum quenching (QQ) bacteria can effectively enhance methane production in an anaerobic membrane bioreactor (AnMBR) while mitigating membrane biofouling. However, the mechanism of such enhancement is unclear. In this study, we analyzed the potential effects from separated hydrolysis, acidogenesis, acetogenesis and methanogenesis steps. The cumulative methane production improved by 26.13%, 22.54%, 48.70% and 44.93% at QQ bacteria dosage of 0.5, 1, 5 and 10 mg _strain/g _beads, respectively. It was found that the presence of QQ bacteria enhanced acidogenesis step resulting in higher volatile fatty acids (VFA) production, while it had no obvious influence on hydrolysis, acetogenesis and methanogenesis steps. The substrate (glucose) conversion efficiency in acidogenesis step was also accelerated (1.45 folds vs control within first eight hours). The abundance of hydrolytic fermentation gram-positive bacteria and several acidogenic bacteria, such as Hungateiclostridiaceae, was promoted in QQ amended culture, which enhanced VFA production and accumulation. Although the abundance of acetoclastic methanogen Methanosaeta reduced by 54.2% on the 1st day of QQ beads addition, the overall performance of methane production was not affected. This study revealed that QQ had a greater impact on the acidogenesis step in the anaerobic digestion process, though the microbial community in acetogenesis and methanogenesis steps was altered. This work can provide a theoretical basis for using QQ technology to slow down the rate of membrane biofouling in anaerobic membrane bioreactors while increasing methane production and maximizing economic benefits.

Thermal hydrolysis pre-treatment has no positive influence on volatile fatty acids production from sewage sludge

The study compares the potential to produce volatile fatty acids (VFA) from sewage sludge, both raw and thermally pre-treated in two modes of operation. In batch mode, raw sludge at pH 8 obtained the highest maximum VFA yield (0.41 g COD-VFA/g CODfed) whereas pre-treated sludge achieved a lower value (0.27 g COD-VFA/g CODfed). The operation of 5-L continuous reactors showed that thermal hydrolysis pre-treatment (THP) did not have any significant influence on VFA yields, averaging 15.1 % g COD-VFA/g COD with raw sludge and 16.6 % g COD-VFA/g COD with pre-treated one. Microbial community analysis showed that phylum Firmicutes was predominant in both reactors and that the enzymatic profiles involved in VFA production were very similar regardless of the substrate fed.

Zero-valent iron effectively enhances valuable products generated from wastewater containing 2-bromo-4,6-dinitroaniline during hydrolysis acidification process: Performance and mechanisms

Treatment to remove 2-bromo-4,6-dinitroaniline (BDNA) from wastewater is urgently needed owing to its carcinogenicity, mutagenicity, and teratogenicity. Hydrolysis acidification (HA) is widely used to treat wastewater to improve biodegradability and resource utilization. Thus, a zero-valent iron (ZVI)-coupled HA system was operated to treat BDNA-containing wastewater for the first time, with emphasis on the performance and enhanced mechanisms. The improved results for BDNA removal efficiency and B/C ratio and the decreased acute toxicity suggested that ZVI addition benefited the formation of advantageous products for subsequent biological treatment. The volatile fatty acids (VFAs) ratio (C_HAc:C_HPr:C_HBu) was optimized from 21:5:4 to 29:5:6, which benefited the utilization of wastewater resources for lipid generation. ZVI characterization, density functional theory (DFT) calculations, extracellular polymeric substances (EPS) analysis, molecular ecological network analysis (MENA), and redundancy analysis (RDA) of the microbial community further revealed that the enhanced mechanisms were summarized as beneficial interactions between ZVI and microorganisms. The ZVI was protected from excessive corrosion and lowered the oxidation-reduction potential (ORP), a key environmental factor, resulting in differences in microbial communities. These differences were presented as the enrichment of keystone species (e.g., Lactococcus), which function in BDNA reduction and VFAs generation. Moreover, ZVI promoted electron transfer, as proven by the high electron transfer capacity (ETC) of 0.452 and 0.361 μmol e^-/g VSS in the R_ZVI and blank systems, respectively.

The research progress, hotspots, challenges and outlooks of solid-phase denitrification process

Nitrogen pollution is one of the main reasons for water eutrophication. The difficulty of nitrogen removal in low-carbon wastewater poses a huge potential threat to the ecological environment and human health. As a clean biological nitrogen removal process, solid-phase denitrification (SPD) was proposed for long-term operation of low-carbon wastewater. In this paper, the progress, hotspots, and challenges of the SPD process based on different solid carbon sources (SCSs) are reviewed. Compared with synthetic SCS and natural SCS, blended SCSs have more application potential and have achieved pilot-scale application. Differences in SCSs will lead to changes in the enrichment of hydrolytic microorganisms and hydrolytic genes, which indirectly affect denitrification performance. Moreover, the denitrification performance of the SPD process is also affected by the physical and chemical properties of SCSs, pH of wastewater, hydraulic retention time, filling ratio, and temperature. In addition, the strengthening of the SPD process is an inevitable trend. The strengthening measures including SCSs modification and coupled electrochemical technology are regarded as the current research hotspots. It is worth noting that the outbreak of the COVID-19 epidemic has led to the increase of disinfection by-products and antibiotics in wastewater, which makes the SPD process face challenges. Finally, this review proposes prospects to provide a theoretical basis for promoting the efficient application of the SPD process and coping with the challenge of the COVID-19 epidemic.

Simultaneous nitrification, denitrification and phosphorus removal: What have we done so far and how do we need to do in the future?

Nitrogen and phosphorus contamination in wastewater is a serious environmental concern and poses a global threat to sustainable development. In this paper, a comprehensive review of the studies on simultaneous nitrogen and phosphorus removal (SNPR) during 1986-2022 (538 publications) was conducted using bibliometrics, which showed that simultaneous nitrification, denitrification, and phosphorus removal (SNDPR) is the most promising process. To better understand SNDPR, the dissolved oxygen, carbon to nitrogen ratio, carbon source type, sludge retention time, Cu²⁺ and Fe³⁺, pH, salinity, electron acceptor type of denitrifying phosphorus-accumulating organisms (DPAOs), temperature, and other influencing factors were analyzed. Currently, SNDPR has been successfully implemented in activated sludge systems, aerobic granular sludge systems, biofilm systems, and constructed wetlands; sequential batch mode of operation is a common means to achieve this process. SNDPR exhibits a significant potential for phosphorus recovery. Future research needs to focus on: (1) balancing the competitiveness between denitrifying glycogen-accumulating organisms (DGAOs) and DPAOs, and countermeasures to deal with the effects of adverse conditions on SNDPR performance; (2) achieving SNDPR in continuous flow operation; and (3) maximizing the recovery of P during SNDPR to achieve resource sustainability. Overall, this study provides systematic and valuable information for deeper insights into SNDPR, which can help in further research.

Effect of Different Acid and Base Potassium Ferrate Pretreatment on Organic Acid Recovery by Anaerobic Digestion of Sludge

Potassium ferrate has strong oxidation in both acid and alkali environments, which has attracted extensive attention. However, the impact of the pH environment on this coupling process with the goal of resource recovery has not received attention. Under the goal of the efficient recovery of organic acid, the changes of solid-liquid characteristics of sludge after acid and alkaline ferrate pretreatment and during anaerobic digestion were discussed. The results showed that compared with blank control groups, after alkaline ferrate pretreatment, the volatile suspended solids (VSSs) decreased the most, reaching 28.19%. After being pretreated with alkaline ferrate, the sludge showed the maximum VFA accumulation (408.21 COD/g VSS) on the third day of digestion, which was 1.34 times higher than that of the acid ferrate pretreatment. Especially in an alkaline environment, there is no need to add additional alkaline substances to adjust the pH value, and the effect of sludge reduction and acid production is the best.

Phage-host interactions: The neglected part of biological wastewater treatment

In wastewater treatment plants (WWTPs), the stable operation of biological wastewater treatment is strongly dependent on the stability of associated microbiota. Bacteriophages (phages), viruses that specifically infect bacteria and archaea, are highly abundant and diverse in WWTPs. Although phages do not have known metabolic functions for themselves, they can shape functional microbiota via various phage-host interactions to impact biological wastewater treatment. However, the developments of phage-host interaction in WWTPs and their impact on biological wastewater treatment are overlooked. Here, we review the current knowledge regarding the phage-host interactions in biological wastewater treatment, mainly focusing on the characteristics of different phage populations, the phage-driven changes in functional microbiota, and the potential driving factors of phage-host interactions. We also discuss the efforts required further to understand and manipulate the phage-host interactions in biological wastewater treatment. Overall, this review advocates more attention to the phage dynamics in WWTPs.

An accelerated approach of biogas production through a two-stage BioH2/CH4 continuous anaerobic digestion system from Napier grass

Napier grass found to be greatest potential for gaseous bioenergy production. The biohydrogen and biomethane productions from untreated Napier grass in single and two-stage continuous bioreactors was evaluated using anaerobic digestion technology. The bioreactors were fed Napier grass with organic loading rate (OLR) of 0.5, 1.0 and 2.0 kg VS/m³-d, respectively. The hydrogen, methane, and energy yields were evaluated. The methane yield of single-stage system was 282.08 CH₄/g vS with OLR of 0.5 kg VS/m³-d. For two-stage system, the biohydrogen and biomethane yields were 90.06 mL H₂/g vS and 367.00 mL CH₄/g vS with OLRs of 1.0 and 0.5 kg VS/m³-d, respectively. The energy yields of single and two-stage systems were 13.14 and 10.10 kJ/g vS respectively. The peak OLR of Napier grass was 0.5 kg VS/m³-d for the two-stage system whereas the total energy recovery was 30 % higher than the single-stage system.

Impact of combined biological hydrolysis and anaerobic digestion temperatures on the characteristics of bacterial community and digestate quality in the treatment of wastewater sludge

This work investigated the impact of temperature on the digestate water quality and bacterial community in the treatment of wastewater sludge using biological hydrolysis (BH)-anaerobic digestion (AD). The results showed that the BH 55 °C followed by AD 35 °C or 42 °C was the optimal temperature combination in terms of methane yield and digestate water quality. High-throughput sequencing revealed the key differences in bacterial communities for different BH-AD temperature combinations. Microbial source tracking showed only minor microbial migration from raw sludge and BH pre-treated sludge to the AD stage. Strong correlations between the residual sCOD, BH-AD temperature conditions, and dominant bacteria were identified. Clostridiales, Bacteroidales, Cloacimonadales, Thermotogales, and Anaerolineales were closely related to the digestate water quality and methane yield. Overall, the results showed that AD temperature exerted a dominant impact on methane yield, digestate water quality, and bacterial compositions in the BH-AD of wastewater sludge.

Newly isolated lysozyme-producing strain Proteus mirabilis sp. SJ25 reduced the waste activated sludge: Performance and mechanism

To promote aerobic digestion of sludge, a lysozyme-producing strain was screened and identified as Proteus mirabilis sp. SJ25. The results of response surface methodology (RSM) showed that at the temperature of 30.8 °C, pH of 6.69, and the inoculum amount of 2.81%, the sludge reduced by 26.58%. Compared with the control group, the removal efficiency of suspended solids (SS) from sludge in the experimental group increased by 14.60%, the release of soluble chemical oxygen demand (SCOD) increased by 2.21 times, and the release of intracellular substances increased significantly. Actinobacteriota, Chloroflexi, Proteobacteria, Bacteroidota, and Firmicutes were the main phyla involved in the sludge reduction process. Strain SJ25 enhanced the degradation rate of sludge by releasing lysozyme lysis to lyse bacteria, enhancing the metabolism and membrane transport of carbohydrates and amino acids. This study provides a new perspective in the field of efficient degradation of waste sludge.

Enhanced production of short-chain fatty acids from sludge by thermal hydrolysis and acidogenic fermentation for organic resource recovery

Acidogenic fermentation (FM treatment) converts organics in waste sludge to valuable short-chain fatty acids (SCFAs). To maintain a favorable condition for the production of SCFAs, an alkali is often added continuously to maintain an alkaline pH in the fermenter. However, this chemical adjustment is costly and biotic hydrolysis is slow. In this research, thermal hydrolysis (TH) was introduced as a pretreatment to enhance fermentation and SCFA production. The results were compared with those obtained from the untreated sludge that underwent fermentation with a daily pH 10 adjustment (NT-FM_pH10). The TH pretreatment resulted in rapid abiotic hydrolysis within a short period (1 h), releasing more than 30.5% of organics into the liquid phase of the sludge. These dissolved organics in sludge promoted rapid acidogenesis and SCFA production. TH together with a one-time alkali pretreatment further increased the production of SCFAs during sludge fermentation (TH&Alk-FM): it produced 22.8% more SCFAs than the non-treated NT-FM_pH10 sludge with alkaline pH control during fermentation. Semicontinuous fermentation further showed the advantage of the TH&Alk-FM process, as a rapid and high production of SCFAs was achieved when the fermentation time was shortened from 5 d to 2 d. The microbial community analysis revealed that TH&Alk-FM and NT-FM_pH10 sludge samples had simple but varied microbial communities. The dominant genera in the TH&Alk-FM sludge were unclassified Ruminococcaceae (18.9%) and unclassified Porphyromonadaceae (22.3%), belonging to the classes Clostridia and Bacteroidia, respectively. NT-FM_pH10 was dominated by Tissierella (23.7%) and Proteiniborus (13.5%), which belong to Clostridia. Compared with NT-FM_pH10, the microbial consortia in TH&Alk-FM were supplied with sufficient soluble organics and performed better in fermentation and SCFA production, without the need for the daily alkali addition to control pH.

Improvement of sewage sludge anaerobic digestion through synergistic effect combined trace elements enhancer with enzyme pretreatment and microbial community response

In this study, a double E strategy (enzymes and enhancer) characterized by high efficiency for enhancing sewage sludge anaerobic digestion (AD) is proposed. This strategy combines addition of trace elements (TEs) enhancer and enzyme pretreatment, inducing a synergistic effect on AD, and it is more effective and economical compared with TEs addition or enzyme pretreatment in isolation. When adding 400 U/g cocktail enzymes and 1.24% trance elements enhancers, the cumulative methane production and the maximum daily methane increased yield by 45.29% and 84.7%, respectively. According to microbial community analysis, the double E strategy significantly motivate the growth of acetogens and protein fermenting bacterium. The relative abundance of Fermentimonas and Lutispora increased by 6.15% and 5.4%, respectively. Archaeal community analysis and changes in the mcrA gene abundance demonstrate enrichment of hydrogenotrophic methanogens, with the methanogens exhibiting high vitalities and stress resistance. The double E strategy could be a promising way to improve industrial sewage sludge AD efficiency.

Effect of biochar combined with a biotrickling filter on deodorization, nitrogen retention, and microbial community succession during chicken manure composting

The high-nitrogen content and dense structure of poultry manure compost cause volatilization of N to ammonia (NH₃). This study evaluated the combined application of biochar and biotrickling filtration (BTF) to remove of odor in chicken manure mixed straw compost (w/w, 2.5:1). Adding of 10% biochar reduced NH₃, hydrogen sulfide (H₂S), and total volatile organic compounds (TVOCs) contents by 20.04%, 16.18%, and 17.55% respectively, and decreased the N loss rate by 8.27%, compared with those observed in control. The organic matter content decreased by 28.11% and germination index reached 97.36% in the experimental group. Meanwhile, the N-cycling microorganisms such as Pusillimonas and Pseudomonas became more active, and the relative abundance of sulfur-cycling microorganisms Hydrogenispora decreased in the experimental group. Following BTF application, the NH₃, H₂S, and TVOCs removal rates reached 95%, 97%, and 53%, respectively.

Optimizing temperature for enhancing waste activated sludge decomposition in lysozyme and rhamnolipid pretreatment system

This study investigated the influence of temperature on the hydrolysis and decomposition of waste activated sludge (WAS) during the enhanced pretreatment system with lysozyme and rhamnolipid (Ly + RL). Results showed that temperature increasing from 15℃ to 55℃ could obviously enhance the release of soluble organic matters and WAS decomposition degree within the Ly + RL pretreatment system. Compared to the sum of sole Ly and sole RL pretreatment, Ly + RL combined pretreatment system at 45℃ presented best synergistic hydrolysis performance. The decomposition degree of bacteria and archaea reached 47.6% and 88.1%, respectively. Meanwhile, increasing temperature could recede the diversity of microbial community in the system. Gammaproteobacteria, with the relative abundance of 90.7%, occupied the absolute dominant position at 45℃. Furthermore, with the rise of temperature, more volatile fatty acids were harvested after anaerobic fermentation.

Regulation of anaerobic fermentation for producing short-chain fatty acids from primary sludge in WWTPs by different alkalis

Carbon source production from primary sludge in wastewater treatment plants (WWTPs) via anaerobic fermentation process has been paid more attention. However, slow hydrolysis rate and low yield of short-chain fatty acids (SCFAs) limited its application. This study aimed at improving the anaerobic fermentation efficiency of primary sludge by alkali regulation (NaOH, Na₂CO₃ and Ca(OH)₂), and revealing the mechanism. Results showed that three kinds of alkalis allowed enhancing hydrolysis and acidification, and reducing methane production in the anaerobic fermentation process of primary sludge. The Na₂CO₃ regulation contributed to highest yield and productivity of SCFAs, reaching 1626 mg COD/L and 0.189 g COD/g VSS at 4th day, respectively. Microbial community structure analysis indicated that the relative abundance of fermentative microbial community was improved in the alkali regulation system, where methanogenic archaea was effectively inhibited. The continuous flow experiment further verified that the Na₂CO₃ regulation could steadily increase yield of SCFAs in the anaerobic fermentation process of primary sludge, and the yield was also the highest among three kinds of alkali regulation.

Evaluation of characteristics and microbial community of anaerobic granular sludge under microplastics and aromatic carboxylic acids exposure

The influences of polyether sulfone (PES) microplastics and different structures aromatic carboxylic acids such as benzoic acid (BA), phthalic acid (PA), hemimellitic acid (HA), and 1-naphthoic acid (1-NA) on the performances and characteristics of anaerobic granular sludge as well as the microbial community were investigated. The chemical oxygen demand (COD) removal efficiency was the highest in the experimental group with 40 mg/L BA, reaching 90.1%. The inhibitory effect of aromatic carboxylic acids addition on the 2,3,5-triphenyltetrazolium chloride (TTC) activity was more obvious than that on 2-para (iodo-phenyl)-3(nitrophenyl)-5(phenyl) tetrazolium chloride (INT) activity. Compared with the control group (only 0.5 g/L PES microplastics, 60.6 mg TF·g TSS·h^-1), the inhibition effect of TTC activity was 32.5 mg TF·g TSS·h^-1 and 44.3 mg TF·g TSS·h^-1 in the 40 mg/L HA and 40 mg/L 1-NA experimental groups, respectively. When aromatic carboxylic acids were added, the activities of acetate kinase and coenzyme F₄₂₀ in the anaerobic granular sludge decreased. The excitation-emission matrix (EEM) fluorescence spectra indicated that loosely bound extracellular polymeric substances (LB-EPS) began to decay. After the addition of different aromatic carboxylic acids, the CC and CH functional groups of the anaerobic granular sludge increased, suggesting that aromatic carboxylic acids migrated to the surface of anaerobic granular sludge, such a transfer would lead to changes in anaerobic granular sludge performance. High-throughput sequencing technology showed that the dominant microbial communities in the anaerobic granular sludge were Proteobacteria, Methanothrix, and Methanomicrobia. After the addition of aromatic carboxylic acids, the relative abundances of Proteobacteria, Methanobacterium, and Methanospirillum increased. In the presence of PES, 1-NA had the most serious toxicity to the anaerobic granular sludge.

Resource recovery from sugarcane vinasse by anaerobic digestion - A review

The increase in biofuel production by 2030, driven by the targets set at the 21st United Nations Framework Convention on Climate Change (COP21), will promote an increase in ethanol production, and consequently more vinasse generation. Sugarcane vinasse, despite having a high polluting potential due to its high concentration of organic matter and nutrients, has the potential to produce value-added resources such as volatile fatty acids (VFA), biohydrogen (bioH₂) and biomethane (bioCH₄) from anaerobic digestion. The objective of this paper is to present a critical review on the vinasse treatment by anaerobic digestion focusing on the final products. Effects of operational parameters on production and recovery of these resources, such as pH, temperature, retention time and type of inoculum were addressed. Given the importance of treating sugarcane vinasse due to its complex composition and high volume generated in the ethanol production process, this is the first review that evaluates the production of VFAs, bioH₂ and bioCH₄ in the treatment of this organic residue. Also, the challenges of the simultaneous production of VFA, bioH₂ and bioCH₄ and resources recovery in the wastewater streams generated in flex-fuel plants, using sugarcane and corn as raw material in ethanol production, are presented. The installation of flex-fuel plants was briefly discussed, with the main impacts on the treatment process of these effluents either jointly or simultaneously, depending on the harvest season.

Effect of Fe3+ on the sludge properties and microbial community structure in a lab-scale A2O process

During biological wastewater treatment, ferric salt (Fe³⁺) usually serves as an inorganic flocculant to improve the agglomeration and sedimentation of suspended solids, and thus the removal efficiency of pollutants to meet the increasing strictly regulated wastewater discharge standards. In this study, we investigated the effects of Fe³⁺ on the removal efficiencies of pollutants, sludge properties, dominant flora and metabolic pathways of bacterial community in a classical anaerobic-anoxic-oxic (A²O) process. The results showed that a Fe³⁺ concentration lower than 10 mg·L^-1 could improve the removal efficiencies of chemical oxygen demand (COD) and total nitrogen (TN), while an inhibition effect was exerted at concentration higher than 10 mg·L^-1. The maximum removal efficiencies of COD and TN were 97% and 89%, respectively, under the critical Fe³⁺ concentration of 10 mg·L^-1. Total phosphorous (TP) removal was constantly positively correlated with Fe³⁺ concentration, due to the enhanced adsorption of phosphorus on activated sludge with the increase of surface roughness. Thauera displayed the highest relative abundance, and certain bacteria in Proteobacteria, Dehloromonas and Candidatus-Competibacter exhibited good adaptability to high concentration of Fe³⁺. In the context of metabolic collaterals, the most abundant functional gene families were identified to be Carbohydrate Metabolism, Amino Acid Metabolism, Cell Motility, Membrane Transport, and Replication and Repair. This study provides an extensive mechanistic insight into the impact of Fe³⁺ on the A²O process, which is of fundamental significance to exploit the contributions of inorganic salts to biological wastewater treatment.

Linkage among the combined temperature-retention time condition, microbial interaction, community structure, and process performance in the hydrolysis of waste activated sludge

Numerous studies have revealed the effect of temperature and hydraulic retention time (HRT) on microbiota in sludge biological hydrolysis (BH). However, few scholars have explored the combined effect of these two critical BH parameters. This study explored the BH performance and community structures over 12 combined temperatures-HRT conditions for temperatures from 35 °C to 55 °C and HRTs from 1.5 days to 6.0 days. Results showed that the 12 combined conditions formed only six distinct community structures with each of them relating to a distinctive range of volatile suspended solid reduction rates. The nonmetric multidimensional scaling and species-species association analysis on the DNA sequencing data revealed that the community structure was greatly driven by the microbial interactions (e.g., heterogeneous commensalism and competition) under the effect of temperature and HRT. This study established the linkages among the combined BH temperature-HRT conditions, microbial interaction, microbial community, and BH performance.

A pilot-scale sulfur-based sulfidogenic system for the treatment of Cu-laden electroplating wastewater using real domestic sewage as electron donor

Elemental sulfur (S⁰) reduction process has been demonstrated as an attractive and cost-efficient approach for metal-laden wastewater treatment in lab-scale studies. However, the system performance and stability have not been evaluated in pilot- or large-scale wastewater treatment. Especially, the sulfide production rate and microbial community structure may significantly vary from lab-scale system to pilot- or large-scale systems using real domestic sewage as carbon source, which brings questions to this novel technology. In this study, therefore, a pilot-scale sulfur-based sulfidogenic treatment system was newly developed and applied for the treatment of Cu-laden electroplating wastewaters using domestic sewage as carbon source. During the 175-d operation, >99.9% of Cu²⁺ (i.e., 5580 and 1187 mg Cu/L for two types of electroplating wastewaters) was efficiently removed by the biogenic hydrogen sulfide that produced through S⁰ reduction. Relatively high level of sulfide production (200 mg S/L) can be achieved by utilizing organics in raw domestic sewage, which was easily affected by the organic content and pH value of the domestic sewage. The long-term feeding of domestic sewage significantly re-shaped the microbial community in sulfur-reducing bioreactors. Compared to the reported lab-scale bioreactors, higher microbial community diversity was found in our pilot-scale bioreactors. The presence of hydrolytic, fermentative and sulfur-reducing bacteria was the critical factor for system stability. Accordingly, a two-step ecological interaction among fermentative and sulfur-reducing bacteria was newly proposed for sulfide production: biodegradable particulate organic carbon (BPOC) was firstly degraded to dissolved organic carbon (DOC) by the hydrolytic and fermentative bacteria. Then, sulfur-reducing bacteria utilized the total DOC (both DOC degraded from BPOC and the original DOC present in domestic sewage) as electron donor and reduced the S⁰ to sulfide. Afterwards, the sulfide precipitated Cu²⁺ in the post sedimentation tank. Compared with other reported technologies, the sulfur-based treatment system remarkable reduced the total chemical cost by 87.5‒99.6% for the same level of Cu²⁺ removal. Therefore, this pilot-scale study demonstrated that S⁰ reduction process can be a sustainable technology to generate sulfide for the co-treatment of Cu-laden electroplating wastewater and domestic sewage, achieving higher Cu²⁺removal and higher cost-effectiveness than the conventional technologies.

Perspectives on microbial community in anaerobic digestion with emphasis on environmental parameters: A systematic review

This paper review is aiming to comprehensively identify and appraise the current available knowledge on microbial composition and microbial dynamics in anaerobic digestion with focus on the interconnections between operational parameters and microbial community. We systematically searched Scopus, Web of Science, pubmed and Embase (up to August 2019) with relative keywords to identify English-language studies published in peer-reviewed journals. The data and information on anaerobic reactor configurations, operational parameters such as pretreatment methods, temperature, trace elements, ammonia, organic loading rate, and feedstock composition and their association with the microbial community and microbial dynamics were extracted from eligible articles. Of 306 potential articles, 112 studies met the present review objectives and inclusion criteria. The results indicated that both aceticlastic and hydrogenotrophic methanogenesis are dominant in anaerobic digesters and their relative composition is depending on environmental conditions. However, hydrogenotrophic methanogens are more often observed in extreme conditions due to their higher robustness compared to aceticlastic methangoens. Firmicutes and Bacteroidetes phyla are most common fermentative bacteria of the acidogenic phase. These bacteria secrete lytic enzymes to degrade organic matters and are able to survive in extreme conditions and environments due to their spores. In addition, among archaea Methanosaeta, Methanobacterium, and Methanosarcinaceae are found at high relative abundance in anaerobic digesters operated with different operational parameters. Overall, understanding the shifts in microbial composition and diversity as results of operational parameters variation in anaerobic digestion process would improve the stability and process performance.

Exogenous N-acyl-homoserine lactones promote the degradation of refractory organics in oligotrophic anaerobic granular sludge

For refractory industrial wastewaters, anaerobic granular sludge technology cannot be widely used because of its limited treatment capacity, so strengthening the anaerobic degradation of refractory organics should be discussed. In this paper, the feasibility of adding exogenous N-acyl-homoserine lactones (AHLs) to promote the degradation of refractory organics in oligotrophic anaerobic granular sludge was addressed. The results showed that, after easily-degradable organics were completely metabolized, exogenous AHLs strengthened the further degradation of refractory organics and improved the methanogenic activity of anaerobic granular sludge. In addition, adding AHLs could promote the secretion of more extracellular polysaccharides and proteins by anaerobic microorganisms to resist the oligotrophic environment. Microbiological analysis showed that adding AHLs significantly optimized the microbial community in oligotrophic anaerobic granular sludge. With the regulation of AHLs, the abundance proportion of hydrolytic acidifying bacteria for refractory organics in bacterial community and the abundance proportion of acetotrophic methanogens in methanogens community increased obviously. Exogenous AHLs showed concentration-related effects on the optimization of bacteria and methanogens, and AHLs of higher concentration were beneficial to the succession of community structure in a better direction. Exogenous regulation of AHLs-mediated QS provided an attractive strategy for enhancing the anaerobic degradation of refractory organics, and proposed a technical idea for the application of anaerobic granular sludge technology in refractory industrial wastewaters.

Post-treatment of dewatered digested sewage sludge by thermophilic high-solid digestion for pasteurization with positive energy output

This study investigated the possibility to use thermophilic anaerobic high solid digestion of dewatered digested sewage sludge (DDS) at a wastewater treatment plant (WWTP) as a measure to increase total methane yield, achieve pasteurization and reduce risk for methane emissions during storage of the digestate. A pilot-scale plug-flow reactor was used to mimic thermophilic post-treatment of DDS from a WWTP in Linköping, Sweden. Process operation was evaluated with respect to biogas process performance, using both chemical and microbiological parameters. Initially, the process showed disturbance, with low methane yields and high volatile fatty acid (VFA) accumulation. However, after initiation of digestate recirculation performance improved and the specific methane production reached 46 mL CH₄/g VS. Plug flow conditions were assessed with lithium chloride and the hydraulic retention time (HRT) was determined to be 19-29 days, sufficient to reach successful pasteurization. Degradation rate of raw protein was high and resulted in ammonia-nitrogen levels of up to 2.0 g/L and a 30% lower protein content in the digestate as compared to DDS. Microbial analysis suggested a shift in the methane producing pathway, with dominance of syntrophic acetate oxidation and the candidate methanogen family WSA2 by the end of the experiment. Energy balance calculations based on annual DDS production of 10000 ton/year showed that introduction of high-solid digestion as a post-treatment and pasteurization method would result in a positive energy output of 340 MWh/year. Post-digestion of DDS also decreased residual methane potential (RMP) by>96% compared with fresh DDS.

Disentangling Community Structure of Ecological System in Activated Sludge: Core Communities, Functionality, and Functional Redundancy

The microbial ecosystems of the sludge were characterized in terms of the core community structure, functional pathways, and functional redundancy through Illumina MiSeq sequencing and PICRUSt analysis on the activated sludge (AS) samples from an extended activated aeration process. Based on the identified OTU distribution, we identified 125 core community genera, including 3 abundant core genera and 21 intermittent abundant core genera. Putative genera Nitrosomonas, Nitrotoga, Zoogloea, Novosphingobium, Thermomonas, Amaricoccus, Tetrasphaera, Candidatus Microthrix, and Haliscomenobacter, which are associated with functions of nitrifying, denitrifying, phosphorus accumulating, and bulking and foaming, were found to present as the core community organisms in the AS sampled from the conventional extended aeration AS processes. The high-abundant nitrogen metabolic pathways were associated with nitrate reduction to ammonium (DNRA and ANRA), denitrification, and nitrogen fixation, while the ammonia oxidation-related genes (amo) were rarely annotated in the AS samples. Strict functional redundancy was not found with the AS ecosystem as it showed a high correlation between the community composition similarity and function similarity. In addition, the classified dominant core genera community was found to be sufficient to characterize the functionality of AS, which could invigorate applications of 16S rDNA MiSeq sequencing and PICRUSt for the prediction of functions of AS ecosystems.

Growth inhibition of sulfate-reducing bacteria for trichloroethylene dechlorination enhancement

Trichloroethylene (TCE) is a frequently found organic contaminant in polluted-groundwater. In this microcosm study, effects of hydrogen-producing bacteria [Clostridium butyricum (Clostridium sp.)] and inhibitor of sulfate-reducing bacteria (SRB) addition on the enhancement of TCE dechlorination were evaluated. Results indicate that Clostridium sp. supplement could effectively enhance TCE reductive dechlorination (97.4% of TCE removal) due to increased hydrogen concentration and Dehalococcoides (DHC) populations (increased to 1 × 10⁴ gene copies/L). However, addition of Clostridium sp. also caused the increase in dsrA (dissimilatory sulfide reductase subunit A) (increased to 2 × 10⁸ gene copies/L), and thus, part of the hydrogen was consumed by SRB, which would limit the effective application of hydrogen by DHC. Control of Clostridium sp. addition is a necessity to minimize the adverse impact of Clostridium sp. on DHC growth. Ferric citrate caused the slight raise of the oxidation-reduction state, which resulted in growth inhibition of SRB. Molybdate addition inhibited the growth of SRB, and thus, the dsrA concentrations (dropped from 4 × 10⁷ to 9 × 10⁵ gene copies/L) and sulfate reduction efficiency were decreased. Increased DHC populations (increased from 8 × 10³ to 1 × 10⁵ gene copies/L) were due to increased available hydrogen (increased from 0 to 2 mg/L), which enhanced TCE dechlorination (99.3% TCE removal). Metagenomic analyses show that a significant microbial diversity was detected in microcosms with different treatments. Clostridium sp., ferric citrate, and molybdate addition caused a decreased SRB communities and increased fatty acid production microbial communities (increased from 4.9% to 20.2%), which would be beneficial to the hydrogen production and TCE dechlorination processes.

Dissecting methanogenesis for temperature-phased anaerobic digestion: Impact of temperature on community structure, correlation, and fate of methanogens

This study investigated the relationship between the temperature (35, 42, and 55 °C) used in temperature-phased anaerobic digestion (TPAD) and fate of methanogens between the two anaerobic digestion (AD) phases. Methanogens were profiled by using next generation sequencing (NGS) and droplet digital PCR approaches. The results showed that optimal combined temperatures for methane production were 55 °C during biological hydrolysis (BH) and 35 or 42 °C during AD. BH exhibited much lower archaeal population and was more susceptible to changes in temperature, compared to the AD phase. Additionally, we demonstrated, for the first time, that the BH step could affect the subsequent AD phase by altering AD methanogen composition and improve the stability of the process by enriching the rapidly growing Methanosarcina in the BH-AD process. These results are significant for understanding the mechanisms and stability of methane production in TPAD systems.

Anaerobic digestion of purple phototrophic bacteria - The release step of the partition-release-recover concept

Purple phototrophic bacteria (PPB) have been proposed as a high-growth, assimilative option for wastewater treatment. The original partition-release-recover concept proposal requires their near complete digestion and release (and subsequent recovery) of energy and nutrients in an anaerobic digester. While the growth (partition) step has been extensively assessed, no work has been done on their anaerobic digestion characteristics (release). Continuous mesophilic (20d) and thermophilic (10d) digestion could achieve around 55% volatile solids degradation (VSD), with 35% (mesophilic) and 20% (thermophilic) nitrogen solubilisation. Post digestion (with/without pretreatment) could increase the VSD to 70% and nitrogen solubilisation to 43%. A number of pretreatment options were tested, with high temperature and sonication being relatively effective, and chemical treatment, and temperature phased digestion being relatively ineffective vs controls. Overall, anaerobic digestion of PPB results in substantial residual particulate material, with an increased nitrogen content, and avenues to effectively utilise this residue should be identified.

Optimization ofS/Fe ratio for enhanced nitrobenzene biological removal in anaerobicSystem amended withSulfide-modified nanoscale zerovalent iron

Anaerobic reduction of nitrobenzene (NB) can be efficiently enhanced bySupplementing withSulfide-modified nanoscale zerovalent iron (S-nZVI). In thisStudy,S/Fe ratio ofS-nZVI was further optimized for enhancing biological NB removal in anaerobicSystem amended withS-nZVI and inoculated by anaerobicSludge. The results indicated that the performance andStability of the coupled anaerobicSystem for NB reduction and aniline formation were remarkably improved byS-nZVI atS/Fe molar ratio of 0.3 (0.3S-nZVI). TheSecretion of extracellular polymericSubstances (EPS), transformation of volatile fatty acids (VFAs), yield of methane and activity ofSeveral key enzymes could be efficiently improved by 0.3S-nZVI. Furthermore,Species related to NB reduction, fermentation, electroactivity and methanogenesis could be enriched in 0.3S-nZVI coupled anaerobicSystem, with remarkable improvement in the biodiversity observed. ThisStudy demonstrated thatSulfidation would be a promising method to improve the performance of nZVI in coupled anaerobicSystems for the removal of recalcitrant nitroaromatic compounds from wastewater.

The seasonal changes of core bacterial community decide sewage purification in sub-plateau municipal sewage treatment plants

The decline of sewage purification efficiency in winter is a frequent problem in sub-plateau municipal sewage treatment plants (MSTPs). Understanding the links between activated sludge (AS) bacterial community and sewage purification is crucial for exploring the cause of this problem. In this study, Illumina high-throughput sequencing technology was applied to investigate the seasonal changes of AS bacterial community in sub-plateau MSTPs. The sequencing result indicates that the bacterial community OTU number, diversity, and relative abundance in winter are significantly lower than that in summer samples. The discriminant linear effect size analysis (LEfSe) reveals that Proteobacteria and Chloroflexi members were enriched in summer AS, while Actinobacteria and Firmicutes were enriched in winter AS. The results indicate that different core bacterial community assembly was developed in summer and winter, respectively. The changes in bacterial community may be the reasons for the lower sewage purification efficiency in winter. Furthermore, redundancy analysis (RDA) shows that temperature and dissolved oxygen (DO) are the principal factors that drive the seasonal changes in the core bacterial community diversity, richness and structure in sub-plateau MSTPs. Thus, the sub-plateau AS selects for a unique community assembly pattern and shapes the particular AS ecosystem. These results expand previous understanding and provide insight into the relationship between bacterial community and performance of sub-plateau MSTPs.

Microbial Community and Its Association With Physicochemical Factors During Compost Bedding for Dairy Cows

Overproduction of livestock manure can cause significant environmental challenges. Compost bedding (CB) is considered an effective approach for recycling the agricultural byproducts and improving the welfare of dairy cattle. During the CB preparing, the composition of microbial communities is usually altered; however, the patterns and drivers of CB microbial communities remains to be investigated. The current study aimed to explore the dynamics of bacterial and fungal communities during the various padded stages, using high throughput sequencing technology and qPCR. The relationships across physicochemical parameters, microbial community composition, and abundance were also evaluated. Sequencing results revealed that Proteobacteria, Bacteroidetes, Actinobacteria, and Firmicutes of bacteria, and Ascomycota of fungi as the major phyla found in CB. qPCR results showed a significant increase in the number of bacterial genome copies from 1.20 × 10⁷ to 3.35 × 10⁷ copies/gram of dry soil, while the number of fungal genome copies significantly increased from 8.43 × 10⁴ to 7.02 × 10⁶ copies/gram of dry soil. Linear discriminant analysis effect size (LEfSe) showed that Actinobacteria was the primary indicator in raw materials while the phylum Bacteroidetes was in the other padded stages. Dothideomycetes was significantly enriched in the initial stage of fungi, whereas Sordariomycetes, including a pathogen Scedosporium prolificans, was the major indicator in CB after 9 days of padding. Mantel test showed that pH significantly influenced bacterial community composition while temperature and total organic carbon (TOC) had a significant effect on fungal community structure. Redundancy analysis indicated that TOC, temperature, and water content had a significant effect on bacterial abundance while total nitrogen, water content, and pH significantly affected fungal abundance. Our finding contributed to the understanding of microbial community succession in CB across different padded stages, and suggests CB management by changing the bedding material every 7 days.

Impact of salinity on anaerobic microbial community structure in high organic loading purified terephthalic acid wastewater treatment system

To investigate the effect of salinity (1% sodium chloride) on anaerobic microbial community structure in high strength telephthalic wastewater treatment system, the performances of anaerobic-aerobic process and the shifts of microbial community in anaerobic tank were studied and determined. Results showed that the chemical oxygen demand (COD) removal in the whole process remained above 90%. And the effluent concentrations of targeted pollutants were lower than 10 mg/L, other than para-toluic acid (PT, 38.09 mg/L). However, methane production significantly decreased compared to no salinity situation. This might be due to the inhibition of salinity on methanogens, which hindered the conversion of acetate to methane. Furthermore, the dominant genus in bacterial level changed from Tepidisphaera to Syntrophus, which facilitated the syntrophic association with hydrogenotrophic methanogens. The prevailed archaea remained acetoclastic Methanothrix above 90%. Therefore, the salinity on anaerobic microbial community structure mainly reflects in the methanogen process, remarkably decreasing methane production.

Diversity evolution of functional bacteria and resistance genes (CzcA) in aerobic activated sludge under Cd(II) stress

An activated sludge sequencing batch reactor (SBR) was used to treat divalent cadmium (Cd(II)) wastewater for 60 d to investigate the overall treatment performance, evolution of the bacterial community, and abundance of the Cd(II) resistance gene CzcA and shifts in its potential host bacteria. During stable operation with a Cd(II) concentration of 20 mg/L, the average removal efficiencies of Cd(II) and chemical oxygen demand (COD) were more than 85% and that of total phosphorus was greater than 70%, while the total nitrogen (TN) was only about 45%. The protein (PN) content in the extracellular polymeric substances (EPS) increased significantly after Cd(II) addition, while polysaccharides displayed a decreasing trend (p < 0.05), indicating that EPS prefer to release PN to adsorb Cd(II) and protect bacteria from damage. Three-dimensional fluorescence spectral analysis showed that fulvic acid-like substances were the most abundant chemical components of EPS. The addition of Cd(II) adversely affected most denitrifying bacteria (p < 0.05), which is consistent with the low TN removal. In addition, quantitative polymerase chain reaction analysis revealed that CzcA gene abundance decreased as the Cd(II) concentration increased, possibly because expression of the CzcA gene was inhibited by Cd(II) stress. The majority of CzcA gene sequences were carried by Pseudomonas, making it the dominant genus among Cd(II)-resistant bacteria.

Application of natural mixed bacteria immobilized carriers to different kinds of organic wastewater treatment and microbial community comparison

Although many literatures have reported that biomass materials had been used for water treatment, most of the biomass materials were directly used for adsorbing toxic or organic substances. In this research, modified pine bark and corn straw were used to prepare the high-efficiency and low-cost activated sludge immobilized materials. By treating phenol wastewater and ordinary organic wastewater, various factors influencing the treatment effect were investigated. The results showed that the immobilized biological carriers had good effects on the treatment of two kinds of wastewater. The removal efficiency of the phenol wastewater reached 100% in 24 h, and the removal efficiency of ordinary organic wastewater reached 95.5% in 96 h. The results of microbial community analysis showed that the abundance of the immobilized carrier and that of the original sludge was similar. But when treating different wastewater, the number and proportion of microorganisms were significantly different.

Performance and bacterial community of moving bed biofilm reactors with various biocarriers treating primary wastewater effluent with a low organic strength and low C/N ratio

A laboratory-scale sequencing batch reactor (SBR) and two moving bed biofilm reactors (MBBRs) with different types of biocarriers were operated to treat the effluent of chemically enhanced primary sedimentation (CEPS). Due to the low organic strength and low carbon/nitrogen ratio of the CEPS effluent, COD and NH₄⁺-N were effectively removed by the MBBRs but not by the SBR. Of the two MBBRs, MBBR2 filled with LEVAPOR biocarrier cubes performed even better than MBBR1 filled with K3 polystyrene biocarriers. The continuous decline of the sludge concentration in the SBR and the high and stable biomass content in MBBR2 contributed to their performances. High-throughput sequencing analysis showed that the reactors had selective effects on the bacterial community structure. Principal coordinate analysis indicated the different dynamic successions in the three reactors. Network analysis showed different community composition and diversity that were highly suggestive of different bacterial interactions among the three bioreactors.

Feasibility of anaerobic digestion on the release of biogas and heavy metals from rice straw pretreated with sodium hydroxide

The feasibility of anaerobic digestion on the release of biogas and heavy metals from contaminated rice straw pretreated with NaOH solution was studied. The results show that NaOH pretreatment can significantly boost the release of biogas and heavy metals from rice straw using anaerobic digestion. Under the optimal conditions for biomass pretreated 6% (w/w) NaOH with a solid-to-solution ratio of 1:20, total biogas and methane yields of 446.3 mL/g and 263.5 mL/g volatile solids were achieved, which were 22.18% and 41.59% higher than those of the control without NaOH pretreatment, respectively, and the release percentages of Cd, Pb, Cu, and Zn from rice straw reached 86.95-97.69%. The release of heavy metals from rice straw can contribute to both the degradation of lignin by NaOH pretreatment and the utilization/transformation of lignocellulose via anaerobic digestion. The acidification levels and total volatile fatty acid contents significantly influence on the release of heavy metals. Based on the Illumina HiSeq sequencing analysis, the dominant phyla in the biogas residues were proteolytic (Bacteroidetes) and hydrogen-producing (Firmicutes) bacteria, while the growth of Methanospirillum and Methanosaeta in anaerobically digested effluent was promoted. The results revealed that anaerobic digestion combined with NaOH pretreatment is suitable for the disposal of heavy metal-contaminated biomass.

Stepwise pH control to promote synergy of chemical and biological processes for augmenting short-chain fatty acid production from anaerobic sludge fermentation

Although sludge-converted short-chain fatty acids (SCFAs) are promising feedstocks for biorefineries, it remains challenging to maximise SCFA production by enhancing synergies between chemical/biological hydrolysis and acidogenesis processes while employing a balanced composition of microbial communities to counteract methanogenesis. Herein, stepwise control of fermentation pH and chemical/microbiological composition analysis of fermented sludge were used to probe the underlying mechanisms of SCFA production. Fermentation at pH 11 during the first three days promoted both chemical and microbial hydrolysis of sludge proteins and provided a niche for Anaerobrancaceae sp. to transform soluble protein into SCFAs. When pH was decreased from 11 to 9, Acinetobacter, Proteiniborus, Proteiniclasticum, and other acetogens became predominant and stayed significantly more active than during first-stage fermentation at pH 11, which benefited the acidification of hydrolysed substrates. Further assays indicated that early-stage sludge fermentation at pH 11 decreased the total amount of methanogenic archaea and hence reduced the amount of SCFAs consumed for methane production. Thus, the use of stepwise pH control for sludge fermentation allowed one to establish process synergies, facilitate chemical and biological hydrolysis, inhibit methanogens, and promote the growth of acidifying bacterial communities, which resulted in efficient SCFA production from sludge.