Decontamination of lead and tetracycline from aqueous solution by a promising carbonaceous nanocomposite: Interaction and mechanisms insight

Efficacy of anthocyanin, kaolinite and cabbage leaves-derived biochar for simultaneous removal of lead, copper and metoprolol from water

Simultaneous removal of toxic elements and pharmaceutical compounds at environmentally relevant concentrations in aqueous solution is challenging. Modification of biochar using environmental materials has attracted significant attention in wastewater treatment, while pristine biochar has several limitations in the simultaneous removal of Lead (Pb2+), Copper (Cu2+), and metoprolol. We investigated the efficacy of biochar composites using waste cabbage leaves-derived biochar with kaolinite, and anthocyanin for simultaneous removal of Pb2+, Cu2+, and metoprolol from water. Using ball milling, the surface area and functional groups of adsorbents were improved via breaking the biochar grains into ultrafine particles. Ball-milled biochar derived from waste cabbage leaves significantly increased Pb2+, Cu2+, and metoprolol adsorption by 105, 71, and 213%, respectively. Results of Brunauer Emmett Teller surface area, Fourier transform infrared and X-ray photoelectron spectroscopies showed that surface area of non-milled biochar improved nearly ten-fold following ball-milling, while several oxygen containing acidic functional groups also increased. The adsorbents resulted in high removal efficiency for Pb2+ (162.9 mg/g) and Cu2+ (48.5 mg/g) in ball milled-kaolinite composite biochar (BMKB) and 76.3 mg/g (metoprolol), respectively in ball milled-anthocyanin composite biochar (BMAB). The simultaneous sorption of Pb2+, Cu2+, and metoprolol in an aqueous solution to BMAB and BMKB, showed that the adsorption capacity followed the order of Pb2+ >Cu2+ > metoprolol in both types of ball-milled biochars. BMKB achieved a high adsorption capacity for Pb2+ and Cu2+ (59 mg/g and 50 mg/g), respectively, while BMAB exhibited an adsorption capacity 22.3 mg/g for metoprolol. It was postulated that sorption of Pb2+, Cu2+ and metoprolol involved multiple adsorption mechanisms namely surface complexation, π-π interaction, H-bond, pore filling, and ion bridging. The findings of this study revealed that ball milling is a potential technology in producing a highlyefficient adsorbent to remediate multi-contaminants in aqueous solution.

Fenton-conditioning of landfill leachate biological sludge enables biochar for efficient Cr(Ⅵ)removal: Occurrence of oxygen-centered free radicals

Fenton-conditioning is commonly used to improve dewatering ability for municipal biological sludge, however, its application in industries is scarce. In this study, biochar (FT-BC) was successfully synthesized from a Fenton-conditioned landfill leachate biological sludge under oxygen-limited. As compared to the corresponding blank and poly ferric-pretreated biochars (BC and PF-BC), moderate Fenton conditioning of the sludge could enable good removal performance for Cr (Ⅵ) by FT-BC. It was found that the oxygen central free radicals (OCFRs) on the biochar surface was intensively promoted due to Fenton electrophilic addition of ·OH onto the oxygen-containing functional groups in biomass. The amounts of OCFRs correlated positively well with the removal efficiency, indicating these persistent free radicals (PFRs)would mainly responsible for the reductive immobilization of Cr(VI)on the FT-BC surface. This study is expected to provide a new method for reclamation of industrial biological sludges with poor agglomeration by introducing simple Fenton pre-conditioning.

A thorough investigation into the adsorption behavior of sophorolipid-modified fly ash towards compound pollution of lead and tetracycline

Heavy metal ions and antibiotics were simultaneously detected in authentic water systems. This research, for the first time, employed synthesized sophorolipid-modified fly ash(SFA) to eliminate tetracycline(TC) and lead(Pb2+) from wastewater. Various characterization techniques, including SEM-EDS, FTIR, XPS, BET, and Zeta, were employed to investigate the properties of the SFA. The results showed that the sophorolipid modification significantly improved the fly ash's adsorption capacities for the target pollutants. The static adsorption experiments elucidated the adsorption behaviors of SFA towards TC and Pb2+ in single and binary systems, highlighting the effects of different Environmental factors on the adsorption behavior in both types of systems. In single systems, SFA exhibited a maximum adsorption capacity of 128.96 mg/g for Pb2+ and 55.57 mg/g for TC. The adsorption of Pb2+ and TC followed pseudo-second-order kinetics and Freundlich isotherm models. The adsorption reactions are endothermic and occur spontaneously. SFA demonstrates varying adsorption mechanisms for two different types of pollutants. In the case of Pb2+, the primary mechanisms include ion exchange, electrostatic interaction, cation-π interaction, and complexation, while TC primarily engages in hydrogen bonding, π-π interaction, and complexation. The interaction between Pb2+ and TC has been shown to improve adsorption efficiency at low concentrations. Additionally, adsorption-desorption experiments confirm the reliable cycling performance of modified fly ash, highlighting its potential as a cost-effective and efficient adsorbent for antibiotics and heavy metals.

Insights into the influence and mechanism of biomass substrate and thermal conversion conditions on FeN doped biochar as a persulfate activator for sulfamethoxazole removal

Fe-N-doped biochar is a promising material for advanced-oxidation heterogeneous catalysis, but its adsorption-catalytic performance is significantly affected by biomass feedstock compositions and thermal conversion conditions and is not yet conclusive. In this paper, four lignocellulosic biomasses (rice straw, bamboo, poplar wood, and corn stover) were selected as raw materials to prepare Fe-N-biochar as persulfate activators by hydrothermal-thermolysis composite. Their lignocellulosic fractions and elemental contents were detected, and a variety of thermal conversion conditions were investigated for the rice straw-based Fe-N-biochar with the best activation performance among them. It was found that the holocellulose and lignin contents of the biomass affected the catalytic activity of the prepared catalysts with correlation coefficients of 0.57 and -0.93, respectively. Increasing the pyrolysis temperature from 500 °C to 800 °C could increase the ratio of Fe2+/Fe3+ and the relative amounts of CC, graphitized N, and oxidized N in the catalyst by 0.17 %, 7 %, 12 %, and 18 %, respectively. Extending the pyrolysis time from 0.5 to 2 h was able to increase the relative content of CC, graphitized N, and oxidized N by 0.18 %, 3 %, 9 %, and 4 %, respectively. The most catalytically active rice straw-derived Fe-NRBC was able to remove 91.7 % of sulfamethoxazole (SMX) and 93.07 % of TOC mainly via ·SO4- and ·OH in an adsorption-catalytic reaction of 60 min with a k of 0.047 min-1 and the main active sites are FeN, Fe0, pyridine N, oxidized N and CO. Finally, degradation intermediates and pathways were also characterized. This paper is expected to provide a basis for the future targeted regulation of Fe-N biochar for water pollution treatment.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

The Removal of Pollutants from Wastewater Using Magnetic Biochar: A Scientometric and Visualization Analysis

In recent years, the use of magnetic biochar in wastewater treatment has shown significant effects and attracted scholars' attention. However, due to the relatively short research time and the lack of systematic summaries, it is difficult to provide a more in-depth analysis. This study utilizes RStudio and CiteSpace software to comprehensively analyze the research trends and progress of magnetic biochar in wastewater treatment. The analysis of bibliometrics is performed on 551 relevant papers retrieved from the Web of Science, spanning the period between 2011 and 2022. The most influential countries, institutions, journals, disciplinary distribution, and top 10 authors and papers in this field have been identified. The latest dataset has been used for keyword clustering and burst analysis. The results indicated that: (1) Bin Gao is the most influential author in this field, and high-level journals such as Bioresource Technology are more inclined to publish articles in the field of magnetic biochar. (2) Research in this field has predominantly focused on the removal of heavy metals and organic compounds. Keyword burst analysis shows a shift in research direction towards the removal of complex organic pollutants recently. (3) For the future development of magnetic biochar, an environment-friendly approach, economic viability, and joint technology are the directions that need more exploration. Finally, this paper provides a summary of the various adsorption mechanisms of magnetic biochar and several common modification methods, aiming to assist scholars in their research endeavors.

Fabrication of Nitrogen-Doped Carbon@Magnesium Silicate Composite by One-Step Hydrothermal Method and Its High-Efficiency Adsorption of As(V) and Tetracycline

Tetracycline (TC) and arsenic contaminants are two main pollutants in aquaculture and livestock husbandry, and they have drawn worldwide attention. To address this issue, a novel N-doped carbon@magnesium silicate (CMS) was fabricated via a facile and low-cost hydrothermal route, adopting glucose and ammonia as C and N sources, respectively. The synergetic combination of carbon and magnesium silicate makes CMS possess a high surface area of 201 m2/g and abundant functional groups. Due to the abundant C- and N-containing functional groups and Mg-containing adsorptive sites, the maximum adsorption capacity values of CMS towards As(V) and TC are 498.75 mg/g and 1228.5 mg/g, respectively. The type of adsorption of As(V) and TC onto CMS is monolayer adsorption. An adsorption kinetic study revealed that the mass transfer and intraparticle process dominates the sorption rate of As(V) and TC adsorption onto CMS, respectively. Various functional groups synthetically participate in the adsorption process through complexion, π-π EDA interactions, and hydrogen bonds. This work provides a one-step, low-cost route to fabricate a N-doped carbonaceous adsorbent with a high surface area and abundant functional groups, which has great potential in the application of practical sewage treatment.

Removal Performance of KOH-Modified Biochar from Tropical Biomass on Tetracycline and Cr(VI)

Biochar can be used to address the excessive use of tetracycline and micronutrient chromium (Cr) in wastewater that potentially threatens human health. However, there is little information about how the biochar, made from different tropical biomass, facilitates tetracycline and hexavalent chromium (Cr(VI)) removal from aqueous solution. In this study, biochar was prepared from cassava stalk, rubber wood and sugarcane bagasse, then further modified with KOH to remove tetracycline and Cr(VI). Results showed that pore characteristics and redox capacity of biochar were improved after modification. KOH-modified rubber wood biochar had the highest removal of tetracycline and Cr(VI), 1.85 times and 6 times higher than unmodified biochar. Tetracycline and Cr(VI) can be removed by electrostatic adsorption, reduction reaction, π-π stacking interaction, hydrogen bonding, pore filling effect and surface complexation. These observations will improve the understanding of the simultaneous removal of tetracycline and anionic heavy metals from wastewater.

Preparation of magnesium potassium phosphate cement from municipal solid waste incineration fly ash and lead slag co-blended: Ca-induced crystal reconstruction process and Pb-Cl synergistic solidification mechanism

Higher chlorine (Cl) content than lead (Pb) content in municipal solid waste incineration fly ash (MSWIFA) impeded the practical application of Pb₅(PO₄)₃Cl-derived magnesium potassium phosphate cement (MKPC) preparation strategy. Herein, Pb/Ca-rich lead slag (LS) was co-blended with MSWIFA to prepare MKPC for the synergistic treatment of both two solid wastes and the Pb-Cl solidification. The results showed that the resulting 15-15 (15 wt% MSWIFA and 15 wt% LS incorporation) sample achieved 25.44 MPa compressive strength, and Pb and Cl leaching toxicity was reduced by 99.18 % and 92.80 %, respectively. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses showed that Pb²⁺, Ca²⁺, phosphate and Cl^- formed Pb_xCa_5-x(PO₄)₃Cl in samples. The formation of Pb_xCa_5-x(PO₄)₃Cl was also demonstrated by the high-angle annular dark field scanning transmission electron microscope (HAADF-STEM), while differences in the lattice characteristics of Pb_xCa_5-x(PO₄)₃Cl and Pb₅(PO₄)₃Cl were found. In-situ XRD indicated that Ca²⁺ accelerated the transformation of Pb²⁺ to Pb₅(PO₄)₃Cl. After co-precipitating with Ca²⁺ to form Pb_xCa_5-x(PO₄)₃Cl, Pb²⁺ continuously substituted Ca²⁺ to eventually transform to Pb₅(PO₄)₃Cl. This work informs the synergistic treatment of MSWIFA and LS and offers new insights into the reaction mechanism between Pb²⁺, phosphate and Cl^- under Ca²⁺ induction.

Immobilization of tannin onto dialdehyde chitosan as a strategy for highly efficient and selective Au(III) adsorption

Recycling of Au(III) from wastewater can not only increase resource utilization but also reduce environmental pollution. Herein, a chitosan-based bio-adsorbent (DCTS-TA) was successfully synthesized via crosslinking reaction between tannin (TA) and dialdehyde chitosan (DCTS) for the recovery of Au(III) from the solution. The maximum adsorption capacity for Au(III) was 1146.59 mg/g at pH 3.0, which fitted well with the Langmuir model. The XRD, XPS, and SEM-EDS analyses demonstrated that Au(III) adsorption on DCTS-TA was a collaborative process involving electrostatic interaction, chelation, and redox reaction. Existence of multiple coexisting metal ions did not significantly affect the Au(III) adsorption efficiency, with >90 % recovery of DCTS-TA obtained after five cycles. DCTS-TA is a promising candidate for Au(III) recovery from aqueous solutions due to its easy preparation, environmental-friendliness, and high efficiency.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

From residue to resource: new insights into the synthesis of functionalized lignin micro/nanospheres by self-assembly technology for waste resource utilization

Among the most abundant biopolymers in the biosphere, lignin is a renewable aromatic compound that represents an untapped opportunity to create new biological products. However, the complex interlacing structures of cellulose, hemicellulose and lignin, as well as the unique properties of lignin, limit the utilization of value-added lignin. Lignin-based nanomaterials open the door for lignin applications in environmental pollutant remediation, biofuel production, biomedicine, and other fields. Herein, we present various factors influencing the formation of micro-nanospheres by self-assembly techniques through a review of previous literature, and emphasize the simple and green synthesis of lignin micro/nanospheres (LMNPs) under non-modified conditions. More importantly, we discuss the mechanism of the formation of nanospheres. Considering the heterogeneity of lignin and the polarity of different solvents, we propose that self-assembly techniques should focus more on the influence brought by lignin itself or the solvent, so that the external conditions can be controlled to prepare LMNPs, which can be used in specific fields. A brief overview of the contribution of lignin-based nanomaterials in various fields is also presented. This review could provide insight for the development of lignin-based nanomaterials.

New insight into the co-adsorption of oxytetracycline and Pb(II) using magnetic metal-organic frameworks composites in aqueous environment: co-adsorption mechanisms and application potentials

The present study aimed to investigate the co-adsorption and application of water stabilized Fe₃O₄@ZIF-8 composite with magnetic cubic crystal structure. This new material was successfully prepared by facile modification strategy and rational design, which was used for simultaneous adsorption of oxytetracycline (OTC) and Pb(II) in aqueous solution. The co-adsorption behavior and mechanism of the composite for OTC and Pb(II) were systematically investigated by characterization techniques and batch experiments, and its application potential was effectively evaluated. The results showed that the synthesized Fe₃O₄@ZIF-8 composite innovatively retained the cubic crystal structure of ZIF-8 and was successfully loaded on the surface of Fe₃O₄ particles with small particle size to form a core-shell structure. The Fe₃O₄@ZIF-8 composite possessed a large specific surface area (1722 m²/g), magnetic separation performance (13.4 emu/g), and rich functional groups. The co-adsorption of OTC and Pb(II) on Fe₃O₄@ZIF-8 had fast reaction kinetics (equilibrium within 90 min) and large adsorption capacity (310.29 mg/g and 276.06 mg/g respectively). The adsorption process for both contaminants followed pseudo-second order kinetics and Langmuir isotherm models and had synergistic and competitive effects at the same time. π-π stacking and electrostatic interaction were the main mechanisms of adsorption. Fe₃O₄@ZIF-8 had good adsorption performance after cyclic adsorption for 4 times and it performed well in the treatment of real waste water. This study provided a new sight for the control of combined pollution of OTC and Pb(II) and proved Fe₃O₄@ZIF-8 composites have great application potentials for complex wastewater treatment.

Functionalized porous nanoscale Fe3O4 particles supported biochar from peanut shell for Pb(II) ions removal from landscape wastewater

The large amounts ofheavy metal from landscape wastewater have become serious problems of environmental pollution and risks for human health. The development of efficient novel adsorbent is a very important for treatment of heavy metal. The functionalized porous nanoscale Fe₃O₄ particles supported biochar from peanut shell (PS-Fe₃O₄) for removal of Pb(II) ions from aqueous solution was investigated. The characterization of PS-Fe₃O₄ composites showed that biochar was successfully coated with porous nanoscale Fe₃O₄ particles. The pseudo second-order kinetic model and Langmuir model were more fitted for describing the adsorption process of Pb(II) ions in solution. The adsorption process of Pb(II) ions removal by PS-Fe₃O₄ composites was a spontaneous and endothermic process. The adsorption mechanisms of Pb(II) ions by PS-Fe₃O₄ composites were mainly controlled by the chemical adsorption process. The maximum adsorption capacity of Pb(II) ions removal in solution by PS-Fe₃O₄ composites reached 188.68 mg/g. The removal mechanism included Fe-O coordination reaction, co-precipitation, complexation reaction, and ion exchange. PS-Fe₃O₄ composites were thought as a low-cost, good regeneration performance, and high efficiency adsorption material for removal of Pb(II) ions in solution.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

Reutilization of manganese enriched biochar derived from Phytolacca acinosa Roxb. residue after phytoremediation for lead and tetracycline removal

This study aimed to evaluate the chemical form variation of Mn in Phytolacca acinosa Roxb. residue under different pyrolysis temperatures and its contribution to decontamination efficacy of lead (Pb(II)) and tetracycline (TC). The results illuminated that pyrolysis temperature is a crucial factor of fraction and bioavailability of Mn and other heavy metals in the resultant biochar and pyrolysis temperature under 450 °C may be most suitable for reutilization without potential risk. The Mn-enriched phytolaccaceae biochar (PSB450) exhibited more preferential sorption toward Pb(II) (279.33 mg/g) and TC (47.51 mg/g) than pristine phytolaccaceae biochar in the single system, mainly due to the formation of MnO_x and Mn minerals via pyrolysis. Binary adsorption showed that Pb(II) would serve as a bridge between PSB450 and TC by complexation within a limited concentration range, thus facilitating their joint decontamination. This study provided an efficient alternative approach for reutilization of Mn-contaminated biomass.

Improved Pb(II) removal in aqueous solution by sulfide@biochar and polysaccharose-FeS@ biochar composites: Efficiencies and mechanisms

Novel biochars, namely nano iron sulfide@ walnut shell biochar (FeS@WNS), Starch-FeS@WNS and Chitosan-FeS@WNS, were prepared by WNS loaded with nano FeS and starch (or chitosan). Nano FeS can be effectively improved lead ions (Pb(II)) removal and starch (or chitosan) improved the stability of FeS and the defect of easy agglomeration. The materials were characterized by SEM, EDS, FTIR and XRD, and the preparation was successful. The adsorption capacity of Pb(II) reached 63.5, 80.0, 84.7 mg g^-1 under 0.5 g L^-1 of FeS@WNS, Starch-FeS@WNS and Chitosan-FeS@WNS. The adsorption of Pb(II) on the materials was more consistent with the pseudo-second-order kinetic model (K₂ = 0.001-0.005 g (mg·min)^-1, R² = 0.980-0.999) and Langmuir model (R² = 0.974-1.00), indicating that the adsorption of Pb(II) was mainly monolayer adsorption dominated by chemical adsorption. △G < 0 (-3.7~-6.97) and △H > 0 (1.56-20.49) indicated that the reaction was a spontaneous endothermic process. The mechanisms of Pb(II) removal from aqueous solutions involved electrostatic attraction, hydrogen bonding, physical adsorption, ion exchange and oxidoreduction. Additionally, stability and reusability of FeS@WNS, Starch-FeS@WNS and Chitosan-FeS@WNS was good. The novel sorbents of Starch-FeS@WNS and Chitosan-FeS@WNS can be used in Pb(II) wastewater treatment.

The sorption and short-term immobilization of lead and cadmium by nano-hydroxyapatite/biochar in aqueous solution and soil

In this study, the composite materials using different ratios of biochar (BC) to nano-hydroxyapatite (nHAP) were prepared for the remediation of lead (Pb) and cadmium (Cd) contaminated water and soil. The sorption and the immobilization experiments indicated a higher sorption capacity and immobilization efficiency of Pb compared to those of Cd. The characteristics of XRD, FTIR, SEM, and XPS manifested that dissolution-precipitation, cation exchange, complexation, and cation-π interaction were the main four mechanisms for the sorption of Pb²⁺ and Cd²⁺ using composite material PC1 (nHAP/BC = 1/1). From semi-quantitative analysis, the mineral effect accounted for the majority of the immobilization of Pb and Cd. Due to obvious Pb-precipitates in the sorbed material, dissolution-precipitation primarily affected the sorption of Pb using PC1, while the immobilization of Cd was mainly attributable to cation exchange. Such results corresponded to the stable Pb-precipitates and unstable Cd-compounds in soil, among which the latter was prone to be released into the environment. The sorption capacity in aqueous solutions and the immobilization efficiencies in the soil for both Pb and Cd increased with the addition of nHAP, which were linearly correlated to the nHAP proportion in the composite materials. In future practical applications, the percentages of composite materials can be designed according to the specific pollutant concentration. This study sheds light on the explicit immobilization mechanisms for Pb and Cd in aqueous solutions to better understand their behaviors in the soil remediated by relevant materials.

Impact of hydrogen sulfide on biochar in stimulating the methane oxidation capacity and microbial communities of landfill cover soil

Hydrogen sulfide (H₂S) can influence methanotrophic activities and be adsorbed by biochar (BC); however, the impact of H₂S on BC in stimulating the methane (CH₄) oxidation capacity of landfill cover soil (LCS) has not been clarified. Thus, batch incubation experiments were conducted to observe the effect of H₂S on the CH₄ oxidation capacity of and microbial communities in BC-amended LCS. Three landfill gas conditions were considered: 5 % CH₄ and 15 % oxygen (O₂) (5 M), 10 % CH₄ and 10 % O₂, and 20 % CH₄ and 5 % O₂ (20 M) by volume, with H₂S concentrations of 0, 100, 250, and 1000 ppm, respectively. Another series was conducted using LCS subjected to pre-H₂S saturation under the 20 M gas condition. In the 5 M gas condition suitable for the dominant methanotroph Methylocaldum (type I), the BC retained its ability to stimulate the CH₄ oxidation capacity of LCS (enhancement of 41-108 %) in the presence of H₂S. Additionally, when H₂S ≤ 250 ppm, the BC exhibited a relatively consistent impact of H₂S on both CH₄ oxidation capacity and microbial communities in LCS, independent of the CH₄ or O₂ concentrations. This result could be attributed to the different pathways of H₂S metabolism for the LCS and BC-amended LCS. Furthermore, when saturated adsorption of H₂S occurred for the LCS, the CH₄ oxidation capacity for BC-amended LCS was higher than that for non-amended LCS, which demonstrated the ability of BC in alleviating the inhibition of H₂S on CH₄ oxidation due to its excellent H₂S adsorption under even anoxic environments.

Assessing the arsenic-saturated biochar recycling potential of vermitechnology: Insights on nutrient recovery, metal benignity, and microbial activity

Biochar mediated pollutant removal is gaining attention because of high efficiency of the process. However, effective recycling avenues of the pollutant-saturated biochars are scarce in the knowledge base; while such materials can be a new source of long-range contamination. Therefore, potential of vermitechnology for eco-friendly recycling of pollutant-loaded biochar was assessed by using arsenic-saturated native (NBC) and exfoliated (EBC) biochars as feedstocks for the first time. Interestingly, the bioavailable arsenic fractions (water soluble and exchangeable) considerably reduced by 22-44 % with concurrent increment (~8-15 %) of the recalcitrant (residual and organic bound) fractions in the biochar-based feedstocks. Consequently, ~2-3 folds removal of the total arsenic was achieved through vermicomposting. The earthworm population growth (2.5-3 folds) was also highly satisfactory in the biochar-based feedstocks. The results clearly imply that Eisenia fetida could compensate the arsenic-induced stress to microbial population and greatly augmented microbial biomass, respiration and enzyme activity by 3-12 folds. Moreover, biochar-induced alkalinity was significantly neutralized in the vermibeds, which remarkably balanced the TOC level and nutrient (N, P, and K) availability particularly in EBC + CD vermibeds. Overall, the nutrient recovery potential and arsenic removal efficiency of vermitechnology was clearly exhibited in NBC/EBC + CD (12.5:87.5) feedstocks. Hence, it is abundantly clear that vermitechnology can be a suitable option for eco-friendly recycling of pollutant-saturated sorbing agents, like biochars.

Hyperporous magnetic catalyst foam for highly efficient and stable adsorption and reduction of aqueous organic contaminants

The facile and low-cost fabrication of free-standing magnetic catalysts with high catalytic efficiency, rapid reaction rate and excellent recoverability has been pursued for various catalysis applications, e.g., treating aqueous organic 4-nitrophenol pollutants. Here, we design and fabricate a free-standing nickel-coated hyperporous polymer foam (Ni-HPF) with adjustable shapes and sizes, hierarchical multiscale porous structures, abundant catalytical interfaces and excellent super-paramagnetic properties. Due to the synergistical effect of abundant binding sites and highly catalytic reduction, the as-prepared Ni-HPF has demonstrated high conversion efficiency (> 90% at extremely low concentration of 7.5 μM) and rapid reaction rate (2.58 × 10^-3 s^-1) for the reduction of organic 4-nitrophenol. Moreover, the magnetic catalyst also holds excellent recoverability (>80% conversion rate even after 1000 cycles) and good reproducibility (>80% conversion rate after 3 months of storage). As such, this work with novel material design and working principle could provide a wide range of potential applications in water purification, chemical catalysis and energy storage devices.

Detection and remediation of pollutants to maintain ecosustainability employing nanotechnology: A review

Environmental deterioration due to anthropogenic activities is a threat to sustainable, clean and green environment. Accumulation of hazardous chemicals pollutes soil, water and air and thus significantly affects all the ecosystems. This article highlight the challenges associated with various conventional techniques such as filtration, absorption, flocculation, coagulation, chromatographic and mass spectroscopic techniques. Environmental nanotechnology has provided an innovative frontier to combat the aforesaid issues of sustainable environment by reducing the non-requisite use of raw materials, electricity, excessive use of agrochemicals and release of industrial effluents into water bodies. Various nanotechnology based approaches including surface enhance scattering, surface plasmon resonance; and distinct types of nanoparticles like silver, silicon oxide and zinc oxide have contributed significantly in detection of environmental pollutants. Biosensing technology has also gained significant attention for detection and remediation of pollutants. Furthermore, nanoparticles of gold, ferric oxide and manganese oxide have been used for the on-site remediation of antibiotics, organic dyes, pesticides, and heavy metals. Recently, green nanomaterials have been given more attention to address toxicity issues of chemically synthesized nanomaterials. Hence, nanotechnology has provided a platform with tremendous applications to have sustainable environment for present as well as future generations. This review article will help to understand the fundamentals for achieving the goals of sustainable development, and healthy environment.

Multiple adsorption systems and electron-scale insights into the high efficiency coadsorption of a novel assembled cellulose via experiments and DFT calculations

In view of the characteristics of heavy metal and antibiotic compound pollution in the Pearl River Basin in Guangzhou. More scientifically modified cellulose, named HVUC, is characterized by multiple hydrophilic groups, long chains and large space and displays highly efficient adsorption of both Cd and sulfamethoxazole (SMZ) and good adaptability in a wide pH range and at high ion strength. Furthermore, the coadsorption mechanism was elaborated from multiple angles. Multiple adsorption experiments explained the competition and synergy effect in the adsorption process. The electrostatic potential maps indicated that HVUC had advantageous adsorption sites for both Cd and SMZ and that electrostatic interactions had the greatest impact on the adsorption of Cd and SMZ. The electron density and differential charge density images proved that Cd more easily overlapped electron clouds and transferred electrons with HVUC and that SMZ^- and could act as a bridge for SMZ^-. The equilibrium configuration indicated that the formation of Cd-SMZ^- complexes led to the bending and folding of SMZ^-, which was not conducive to overall adsorption when SMZ^- was close to HVUC and could lead to the release of SMZ^- when Cd was close to HVUC, which confirmed the proposed mechanism of complexation-decomplexation-complexation.

Enhanced adsorption of malathion and phoxim by a three-dimensional magnetic graphene oxide-functionalized citrus peel-derived bio-composite

By integrating the steps of direct magnetization and one-pot pyrolysis, a three-dimensional (3D) magnetic graphene oxide-functionalized citrus peel-derived bio-composite (mGOBC) was synthesized and characterized successfully, and it was proved to possess a three-dimensional (3D) porous architecture and graphitic structure. Its potential as an enrichment adsorbent was investigated using adsorption kinetics and adsorption isotherm models to establish an effective analytical method for the determination of organophosphorus pesticides (OPPs) in vegetables. The experimental results indicated that the adsorption was better fitted with the pseudo second order model and Langmuir isotherm model, and the maximum adsorption capacities for malathion and phoxim were 25.26 mg g-1 and 42.31 mg g-1, respectively. It was found that the graphitic structure of mGOBC resulted in π-π EDA (electron donor-acceptor) interaction with the benzene rings, electron-donating N, P, and S atoms in the analytes, which assisted adsorption. Subsequently, Plackett-Burman (P-B) experimental design, central composite design (CCD) and response surface methodology (RSM) were employed to develop an analytical method based on the mGOBC adsorbent. Under optimal conditions, the developed method is accurate and precise. The novel synthesized mGOBC can efficiently achieve removal and trace determination of harmful OPPs.

Hydrous manganese dioxide modified poly(sodium acrylate) hydrogel composite as a novel adsorbent for enhanced removal of tetracycline and lead from water

In this study, hydrous manganese dioxide (HMO) modified poly(sodium acrylate) (PSA) hydrogel was produced for the first time to remove tetracycline(TC) and lead(Pb(II)) from water. The as-prepared composite was characterized using various techniques, such as SEM-EDS, FTIR, XRD, BET, and XPS, to elucidate the successful loading of HMO and analyze subsequent sorption mechanisms. Different influencing parameters such as adsorbent dose, initial concentration of adsorbates, reaction time, solution pH, and temperature were also investigated. The adsorption kinetic studies of both TC and Pb(II) removal indicated that equilibrium was achieved within 12 h, with respective removal rates of 91.9 and 99.5%, and the corresponding adsorption data were fitted to the second-order kinetics model. According to the adsorption isotherm studies, the sorption data of TC best fitted to the Langmuir isotherm model while the adsorption data of Pb(II) were explained by the Freundlich isotherm model. The maximum adsorption capacities of both TC and Pb(II) were found to be 475.8 and 288.7 mg/g, respectively, demonstrating excellent performances of the adsorbent. The uptake capacity of PSA-HMO was significantly influenced by the level of solution pH, in which optimum adsorption amount was realized at pH 4.0 in the TC and Pb(II) systems, respectively. Thermodynamic studies showed the process of TC and Pb(II) adsorptions were endothermic and spontaneous. Overall this study elucidated that PSA-HMO composite can be a promising candidate for antibiotics and heavy metal removal in water treatment applications.

Jointed Synchronous Photocatalytic Oxidation and Chromate Reduction Enabled by the Defect Distribution upon BiVO4: Mechanism Insight and Toxicity Assessment

Exploring active and ecological materials for the restoration of complex pollution system is highly desired. This study presents a facile defect-tailoring strategy for combined pollutants purification with BiVO₄ photocatalysis in which the jointed synchronous reaction of oxidation and reduction is integrated instead of the sequential reaction in two individual systems. XPS and EPR reveal that BiVO₄ with a suitable oxygen vacancies (OVs) concentration and distribution exhibits superior photocatalytic activity under the coexistence of TC-HCl and Cr(VI) with Cr(VI) reduction efficiency increased by 71 times compared with the individual Cr(VI) system along with TC-HCl removal efficiency comparable to a single TC-HCl system. The mechanism of synchronous redox reactions mediated by surface OVs is revealed by comprehensive characterization together with reaction kinetic analysis, and the electronic band structure adjustment induced by the OVs variation is confirmed. Active species identification tests and intermediate product analysis confirm that singlet oxygen (¹O₂) accounts for the selective oxidation of TC-HCl, while electrons dominate the reduction of Cr(VI), under a coexistent environment. The influence of water quality parameters (e.g., pH, cations, anions, and organic substances) on the photocatalytic activity is investigated considering the complexity of the real aquatic environment. Importantly, toxicity assessment with Gram-negative strain E. coli as a model bacterium validates that the toxicity of the intermediates can be reduced to low or even ultralow levels. This work is dedicated to the mechanistic study of defect photocatalysis over BiVO₄ and provides a jointed synchronous reaction system for combined pollutant purification.

Microplastics and nanoplastics in the environment: Macroscopic transport and effects on creatures

Industrial progress has brought us an important polymer material, i.e. plastic. Because of mass production and use, and improper management and disposal, plastic pollution has become one of the most pivotal environmental issues in the world today. However, the current researches on microplastics/nanoplastics are mainly focused on individual aquatic, terrestrial and atmospheric environments, ignoring the fact that the natural environment is a whole. In this regard, the transport of microplastics/nanoplastics among the three environment compartments, including reciprocal contributions and inherent connections, and the impact of microplastics/nanoplastics on organisms living in multiple environments are research problems that we pay special attention to. Furthermore, this paper comprehensively reviews the transport and distribution of microplastics/nanoplastics in individual compartments and the toxicity of organisms, either alone or in combination with other pollutants. The properties of microplastics/nanoplastics, environment condition and the growth habit of organisms are critical to the transport, distribution and toxicity of microplastics/nanoplastics. These knowledge gaps need to be addressed urgently to improve cognition of the degree of plastic pollution and enhance our ability to deal with pollution. Meanwhile, it is hoped that the paper can provide a relatively complete theoretical knowledge system and multiple "leads" for future innovative ideas in this field.

Facile modification of hydrochar derived from cotton straw with excellent sorption performance for antibiotics: Coupling DFT simulations with experiments

This study aimed to investigate the sorption of tetracycline (TC) and norfloxacin (NOR) by modified cotton straw hydrochars (CSHC), which would enable the agricultural waste to be processed and recycled. Three kinds of hydrochars were prepared by H₂SO₄, KOH and KMnO₄ modification, showed obvious differences in structures and surface functional groups. The sorption processes contain film diffusion, intraparticle diffusion, and equilibrium. The interaction mechanism between hydrochar and antibiotics include π-π stacking, hydrogen bond, and electrostatic interaction. KMnO₄-modified hydrochar had the largest sorption capacity for TC (58.09 mg/g), while H₂SO₄-modified hydrochar had the largest sorption capacity for NOR (49.64 mg/g). Density functional calculations (DFT) results confirmed that the sorption capacity between hydrochar (HC) and TC was larger than that between HC and NOR. During the sorption process, the TC and NOR were regarded as electron acceptor and electron donor. Generally, CSHC-KMnO₄ and CSHC-H₂SO₄ may be simply prepared and have the potential to eliminate antibiotics from water.

Insight into the co-adsorption behaviors and interface interactions mechanism of chlortetracycline and lead onto struvite loaded diatomite

Finding effective methods for simultaneous removal of antibiotics and heavy metals has attracted increasing concerns. Herein, we investigated the co-adsorption behaviors of chlortetracycline (CTC) and Pb (II) onto struvite loaded diatomite (SD) in aqueous solution, and their interface interactions mechanism was investigated using crystal and microstructure analysis combined with density functional theory (DFT) calculations. The adsorption capacity at equilibrium of CTC increased from 44.28 to 87.58 mmol/kg with the presence of Pb (II), but the adsorption capacity at equilibrium of Pb (II) decreased from 4289.70 to 3559.9 mmol/kg with the presence of CTC. Besides, the effect of environmental factors (solution pH and humic acid) was also evaluated. Microstructure analysis for recovered products demonstrated that the interface interactions brought by the surface Pb(II) of Pb₅(PO₄)₃OH and carbonyl-O of CTC could facilitate the removal of CTC but inhibit the removal of Pb(II) by suppressing the crystal growth of Pb₅(PO₄)₃OH, especially the orientation growth of (0 0 1) crystal plane. DFT calculations gave theoretical support for the interface interactions between Pb₅(PO₄)₃OH and CTC.

Efficient activation of persulfate by a magnetic recyclable rape straw biochar catalyst for the degradation of tetracycline hydrochloride in water

A recyclable magnetic rape straw biochar (MRSB) catalyst was synthesized by a high value-added and energy-saving method using abandoned rape straw as the raw material. The MRSB catalyst showed high catalytic activity and recyclability for activating persulfate (PS) to degrade tetracycline hydrochloride (TC) in water. The Fe₃O₄ in the MRSB greatly promoted the activation of PS. More importantly, the MRSB catalyst exhibited high catalytic performance over a wide pH range (2.99-11.01) for activating PS to degrade TC in water. Moreover, MRSB still had good catalytic activity for TC degradation after 8 recycling cycles and was easily separated by an external magnetic field for reuse. The electron spin resonance (ESR) analysis indicated that the generation of the sulfate radicals (SO₄^-), hydroxyl radicals (OH) and superoxide radicals (O₂^-) was greatly promoted in the MRSB/PS system. As a result, MRSB exhibited 13.24-fold higher reaction rate for activating PS than those of rape straw biochar (RSB). Both radical mechanism and non-radical mechanism existed in the MRSB/PS system, and SO₄^- and singlet oxygen (¹O₂) played a determinative role. This study might give a new way to reuse abandoned rape straw and synthesize new recyclable catalysts for activating PS to degrade organic pollutants in water.

Preparation of biochar and biochar composites and their application in a Fenton-like process for wastewater decontamination: A review

Biochar is a carbon-rich material that can be obtained from pyrolysis of solid waste (e.g., agricultural solid waste and sludge from wastewater treatment plants). Biochar features low cost, large specific surface area, and strong adsorption capacity. New biochar composites can be produced via modification and loading of nano particles onto biochar. Biochar can contribute to the dispersion and stabilization of nano particles. In addition, nano particles can increase the number of surface-active sites, which improves the physicochemical properties of the material. Biochar and biochar composites have been applied widely in wastewater treatment, and have significantly enhanced the treatment performance of Fenton-like processes (activation of hydrogen peroxide and persulfate) as an advanced oxidation process for organics removal and wastewater decontamination. This paper reviews the preparation methods for biochar and biochar composites to systematically analyze the influential factors on the preparation process. The paper also comprehensively reviews the mechanisms by which biochar removes different organic pollutants. However, due to the vast number of different biochar feedstocks and their preparation methods, it is difficult to compare the properties of one biochar to another. Guidance if provided for the application of biochar and biochar composites for wastewater decontamination.

Contribution of precipitation and adsorption on stabilization of Pb in mine waste by basic oxygen furnace slag and the stability of Pb under reductive condition

A basic oxygen furnace (BOF) slag was used to stabilize lead (Pb) in a mine waste. Stabilization efficiencies differed depending on the slag contents (i.e., 3, 5, and 10 wt.%) and the water contents (i.e., 0.05-5.0 L/kg), varying from 52.2 to 98.0%, and both the slag contents and the water contents positively affected the stabilization efficiency. X-ray photoelectron spectroscopy suggested an evidence that precipitation and adsorption mechanisms were involved. When the contribution of each mechanism was determined, the increase in the BOF slag content mainly increased adsorption mechanism probably because of the increase in the adsorption sties. The increase in the water content, on the other hand, facilitated precipitation mechanism by lowering the ionic strength. Stabilized Pb could be mobilized at redox potential of 20-85 mV due to the reductive dissolution of Fe and Mn oxides. Sequential extraction results demonstrated that the adsorbed Pb became mobilized, and the fraction of exchangeable Pb increased.

Fe1-xS/biochar combined with thiobacillus enhancing lead phytoavailability in contaminated soil: Preparation of biochar, enrichment of thiobacillus and their function on soil lead

Properly increasing mobility of heavy metals could promote phytoremediation of contaminated soil. Fe_1-xS/biochar was successfully prepared from sawdust with loading pyrrhotite (Fe_1-xS) at a pyrolysis temperature of 550 °C. Thiobacillus were successfully adsorbed and enriched on the surface of Fe_1-xS/biochar. Microbial growth for 36 d supported by bio-oxidization of Fe_1-xS decreased the system pH from 4.32 to 3.50, increased the ORP from 298 to 487 mV, and the Fe³⁺ release reached 25.48 mg/g, enhancing the oxidation and leaching of soil Pb. Finally, Fe_1-xS/biochar and Thiobacillus were simultaneously applied into Pb-contaminated soil for 60 d, the soil pH decreased from 7.83 to 6.72, and the exchangeable fraction of soil Pb increased from 22.86% to 37.19%. Ryegrass planting for 60 d in Pb-contaminated soil with Fe_1-xS/biochar and Thiobacillus showed that the Pb content in shoot and root of ryegrass increased by 55.65% and 73.43%, respectively, confirming an obvious increase of phytoavailability of soil Pb. The relative abundance of Thiobacillus in remediated soil significantly increased from 0.06% to 34.55% due to the addition of Fe_1-xS/biochar and Thiobacillus. This study provides a novel approach for regulating the Pb phytoavailability for phytoremediation of Pb-contaminated soil.

Insight into the effect of lignocellulosic biomass source on the performance of biochar as persulfate activator for aqueous organic pollutants remediation: Epicarp and mesocarp of citrus peels as examples

In this work, the cellulose-enriched mesocarp of tangerine peels (TP) and the lignin-enriched epicarp of the peels (e-TPs) were used as examples to unveil the link between the basic components (cellulose, hemicellulose and lignin) in lignocellulosic biomass and catalytic activity of biochar towards peroxymonosulfate (PMS) activation. The TP biochar exhibits sheet-like morphology and high porosity, while the e-TPs biochar shows a bulk morphology. Accordingly, the former outperformed the latter in terms of catalytic degradation of phenol with PMS, attributing to the higher content of cellulose than lignin in the TP precursor, which was further supported by comparing the catalytic activity of biochar prepared from binary mixtures containing different proportions of cellulose and lignin. Nonradical oxidation pathway based on singlet oxygen (¹O₂) and electron-transfer mechanism was involved in the TP biochar/PMS system and the key role of CO group in biochar for ¹O₂ generation was computationally demonstrated. Additionally, the unique porous structure and surface chemistry of TP biochar endows it an excellent adsorbent for various organic pollutants. Herein, this work provides an insight into the effect of lignocellulosic biomass source on the catalytic property of biochar, which would be beneficial to screen lignocellulosic biowastes to prepare high-performance biochar for water remediation.

How does the microenvironment change during the stabilization of cadmium in exogenous remediation sediment?

The pollution degree of heavy metals is closely related to the sediment microenvironment. This study aims to give a comprehensive account of the changes of microenvironment in sediment during the stabilization of cadmium (Cd) by the sodium lignosulphonate (SLS) modified chlorapatites (SLS@nClAP). Chemical speciation change demonstrated that SLS@nClAP possessed better stabilizing capacity (65.84 %-76.66 %) for Cd than unmodified chlorapatites (ClAP) (45.88 %). It might be since that the surface of SLS@nClAP presented a more dispersive thin sheet structure with sulfonate groups compared with the aggregate block structure of ClAP. High-throughput sequencing results displayed that succession of microbial community occurred after remediation in sediment. Most importantly, the dominant genus changed from massilia to phosphate-solubilizing bacterium-pseudomonas which might be due to the remediation of chlorapatites and the stabilization of Cd. Moreover, enzyme activity changes showed that the activity of catalase and urease were highly influenced by the stability and bioavailability of Cd during the incubation. This study not only provided a novel remediation technology for Cd-polluted sediment but also confirmed that the change of microenvironment was closely related to the stability and bioavailability of Cd in sediment.

Biochar-mediated Fenton-like reaction for the degradation of sulfamethazine: Role of environmentally persistent free radicals

Swine manure biochar (SBC) pyrolyzed at 300 °C, 600 °C and 900 °C were utilized to degrade sulfamethazine (SMT) in heterogeneous Fenton-like systems which achieved excellent degradation efficiency (over 85% in 30 min). Experiments results demonstrated that SBC possessed the poor SMT adsorption capacity but high catalytic performance. Electron Paramagnetic Resonance (EPR) and X-ray photoelectron spectroscopy (XPS) analysis revealed that there were oxygen-centered environmentally persistent free radicals (EPFRs) and carbon-centered EPFRs with an adjacent oxygen atom in SBC. The oxygen-centered EPFRs played a major role in the catalytic process which tended to convert to carbon-centered EPFRs after the reaction. Besides, the electron transfer pathways were the most likely catalytic mechanism of SBC and the contribution of OH was dominant through Electron capture experiments and Linear sweep voltammetry (LSV) measurements. The acidic or alkaline condition can promote the catalytic ability of SBC. The presence of dissolved salts (NaCl) inhibited the catalytic process but the inhibition was slightly weakened at high concentration of NaCl, which showed the high tolerance of Cl^- in Fenton/Fenton-like systems. Moreover, real wastewater application suggested that SBC600/H₂O₂ system possessed excellent catalytic efficiency and good adaptability. This research provides a novel swine manure reuse process with high practicability and presents a more explicit perspective about the reaction mechanisms of EPFRs in biochar.

Environmental application of magnetic cellulose derived from Pennisetum sinese Roxb for efficient tetracycline removal

Pennisetum sinese Roxb is a kind of forage with high yield and high quality. However, because only the leaves are used as feed, most straw is discarded or burned, causing pollution and resources waste. In this study, a magnetic cellulose adsorbent produced by extracting cellulose from Pennisetum sinese Roxb straw was used to adsorb antibiotic tetracycline (TC) from water and can be easily separated. The physicochemical properties of the obtained cellulose samples were studied. The adsorption process was mediated by multiple mechanisms including intra-particle diffusion, chemical ion exchange, hydrogen bonding, and electrostatic interaction. We determined the optimal pH, contact time, initial TC concentration, and temperature before investigating the effects of humic acid and ionic strength on the adsorption process. Our results demonstrate that the magnetic cellulose is a promising adsorbent for the removal of TC from water and is worth to be studied further to develop real-world implementation strategies.

Adsorption of tetracycline hydrochloride onto ball-milled biochar: Governing factors and mechanisms

Pristine and ball milled wheat stalk biochars pyrolysed at 300 °C, 450 °C, 600 °C were studied for tetracycline hydrochloride (TCH) adsorption from aqueous solution. Surface characteristics of ball milled biochar (BM-biochar) were significantly enhanced over their pristine counterparts. TCH adsorption occurred largely on external surface and by filling pores of biochars as evidenced by strong positive correlation between adsorption and external specific surface area (SSA), total pore volume, or mesoporous volume. A two-stage intra-particle diffusion model, limited by the TCH diffusion through the boundary liquid layer, well described TCH adsorption. Maximum TCH adsorption occurred at about pH = 6-8. While solution cations including Na⁺, K⁺ and Mg²⁺ subdued TCH adsorption as they competed for adsorption sites, Ca²⁺ promoted TCH adsorption due to formation of tetracycline-Ca²⁺ complexes. The best performing BM-biochar was the one pyrolysed at 600 °C with TCH adsorption amount of 84.54 mg/g. Therefore, this BM-biochar has the potential for TCH removal from aqueous solutions. And the research shed light on the management of organic contaminants in real wastewater by BM-biochar.