Biorefineries in circular bioeconomy: A comprehensive review

Advancing a food loss and waste bioproduct industry: A critical review of policy approaches for application in an Australian context

Food loss and waste (FLW) contains an abundance of nutrient components that can be extracted and converted into valuable bioproducts through biorefining (e.g., pharmaceuticals, cosmetics, nutrients). Australia has identified bioproducts from a FLW feedstock as one avenue through which it can meet its commitment to UN Sustainable Development Goal Target 12.3, aiming to halve food waste by 2030. An industry for bioproducts in Australia is, however, nascent and will require targeted and sustained policy intervention to advance in line with the production targets it has set to meet Target 12.3. The aim of this critical review is threefold. Firstly, it draws on the research literature to identify barriers to advancing a bioproduct industry from FLW. Secondly, it constructs a taxonomy of policies available to overcome these barriers and support industry development. Finally, it applies the taxonomy to established policy settings in Australia (examining both national settings and Queensland state settings) and the European Union (EU), where the industry and associated policy is more mature. Australia has few national policies directly targeting a bioproduct industry. A comparative assessment of policy settings allows this review to identify lessons Australia can draw from the EU experience as it advances its own industry. Findings demonstrate a complex and fragmented policy landscape. Key recommendations from the literature emphasise the need to establish coordinated strategic instruments; target research and development opportunities for optimised, sustainable processes; and implement appropriate incentives to establish a 'level playing field', as technology readiness increases. The critical requirement for policy stability and coherence, flags the need to lay groundwork policy in this area as a priority.

Composition of Lignocellulose Hydrolysate in Different Biorefinery Strategies: Nutrients and Inhibitors

The hydrolysis and biotransformation of lignocellulose, i.e., biorefinery, can provide human beings with biofuels, bio-based chemicals, and materials, and is an important technology to solve the fossil energy crisis and promote global sustainable development. Biorefinery involves steps such as pretreatment, saccharification, and fermentation, and researchers have developed a variety of biorefinery strategies to optimize the process and reduce process costs in recent years. Lignocellulosic hydrolysates are platforms that connect the saccharification process and downstream fermentation. The hydrolysate composition is closely related to biomass raw materials, the pretreatment process, and the choice of biorefining strategies, and provides not only nutrients but also possible inhibitors for downstream fermentation. In this review, we summarized the effects of each stage of lignocellulosic biorefinery on nutrients and possible inhibitors, analyzed the huge differences in nutrient retention and inhibitor generation among various biorefinery strategies, and emphasized that all steps in lignocellulose biorefinery need to be considered comprehensively to achieve maximum nutrient retention and optimal control of inhibitors at low cost, to provide a reference for the development of biomass energy and chemicals.

Valorization of Waste Watermelon Rinds as a Bio-adsorbent for Efficient Removal of Methylene Blue Dye from Aqueous Solutions

Nature-based solutions (NBSs) for remediation of various emerging contaminants have gained impetus during the last few decades. In the current study, watermelon (citrullus lanatus), a highly consumed seasonal fruit, was used as a feedstock waste biomass for biochar synthesis through valorization of watermelon rinds. The watermelon biochar (WM-BC) was synthesized through slow pyrolysis at 550°C under anoxic conditions. Langmuir model with R2>99, was found to best fit the adsorption isotherm, and the adsorption kinetics was best described by the pseudo-second-order model. Various characterization tools including FTIR, SEM, BET, XRD, and TEM were used to evaluate the surface morphology of the biochar. The removal efficiency increased from 35% (dosage = 0.4 g), to 81% at WM-BC dosage of 2 g. A maximum adsorption capacity of 115.61 mg/g was found. The results from kinetic and isotherm model model suggested that the adsorption was favorable and multilayer adsorption can be considered. The adsorption mechanism was found to be governed by the co-existing factors such as hydrogen bonding, electrostatic interactions, and aromatic interactions. Results suggest that WM-BC has high potential to be employed as an adsorbent for efficient remediation of methylene blue dyes from aqueous solutions.

Application of microbial resources in biorefineries: Current trend and future prospects

The recent growing interest in sustainable and alternative sources of energy and bio-based products has driven the paradigm shift to an integrated model termed "biorefinery." Biorefinery framework implements the concepts of novel eco-technologies and eco-efficient processes for the sustainable production of energy and value-added biomolecules. The utilization of microbial resources for the production of various value-added products has been documented in the literatures. However, the appointment of these microbial resources in integrated resource management requires a better understanding of their status. The main of aim of this review is to provide an overview on the defined positioning and overall contribution of the microbial resources, i.e., algae, fungi and bacteria, for various bioprocesses and generation of multiple products from a single biorefinery. By utilizing waste material as a feedstock, biofuels can be generated by microalgae while sequestering environmental carbon and producing value added compounds as by-products. In parallel, fungal biorefineries are prolific producers of lignocellulose degrading enzymes along with pharmaceutically important novel products. Conversely, bacterial biorefineries emerge as a preferred platform for the transformation of standard cells into proficient bio-factories, developing chassis and turbo cells for enhanced target compound production. This comprehensive review is poised to offer an intricate exploration of the current trends, obstacles, and prospective pathways of microbial biorefineries, for the development of future biorefineries.

Perspective on Lignin Conversion Strategies That Enable Next Generation Biorefineries

The valorization of lignin, a currently underutilized component of lignocellulosic biomass, has attracted attention to promote a stable and circular bioeconomy. Successful approaches including thermochemical, biological, and catalytic lignin depolymerization have been demonstrated, enabling opportunities for lignino-refineries and lignocellulosic biorefineries. Although significant progress in lignin valorization has been made, this review describes unexplored opportunities in chemical and biological routes for lignin depolymerization and thereby contributes to economically and environmentally sustainable lignin-utilizing biorefineries. This review also highlights the integration of chemical and biological lignin depolymerization and identifies research gaps while also recommending future directions for scaling processes to establish a lignino-chemical industry.

Optimised Degradation of Lignocelluloses by Edible Filamentous Fungi for the Efficient Biorefinery of Sugar Beet Pulp

The degradation of the complex structure of lignocellulosic biomass is important for its further biorefinery to value-added bioproducts. The use of effective fungal species for the optimised degradation of biomass can promote the effectiveness of the biorefinery of such raw material. In this study, the optimisation of processing parameters (temperature, time, and s/w ratio) for cellulase activity and reducing sugar (RS) production through the hydrolysis of sugar beet pulp (SBP) by edible filamentous fungi of Aspergillus, Fusarium, Botrytis, Penicillium, Rhizopus, and Verticillium spp. was performed. The production of RS was analysed at various solid/water (s/w) ratios (1:10-1:20), different incubation temperatures (20-35 °C), and processing times (60-168 h). The Aspergillus niger CCF 3264 and Penicillium oxalicum CCF 3438 strains showed the most effective carboxymethyl cellulose (CMC) degrading activity and also sugar recovery (15.9-44.8%) from SBP biomass in the one-factor experiments. Mathematical data evaluation indicated that the highest RS concentration (39.15 g/100 g d.w.) and cellulolytic activity (6.67 U/g d.w.) could be achieved using A. niger CCF 3264 for the degradation of SBP at 26 °C temperature with 136 h of processing time and a 1:15 solid/water ratio. This study demonstrates the potential of fungal degradation to be used for SBP biorefining.

Bioremediation potential of the Chlorella and Scenedesmus microalgae in explosives production effluents

This study explores microalgae-based bioremediation for treating black gunpowder production effluents, an understudied yet environmentally significant stream. Two native microalgae, Chlorella sp. MC18 (CH) and Scenedesmus sp. MJ23-R (SC), were assessed for growth kinetics and nutrient removal capabilities in culture media containing different proportions of untreated raw wastewater. Results show both species thrived in 100 % raw wastewater, displaying robust growth and substantial biomass production in parallelepiped-shaped photobioreactors. SC showed superior performance, with higher maximum specific growth rate (0.549 d-1), biomass yield (454.57 mg L-1) and biomass productivity (64.94 mg L-1 d-1) compared to CH (0.524 d-1, 380.60 mg L-1, 54.37 mg L-1 d-1, respectively). The use of 100 % raw wastewater as a culture medium eliminated the need for additional freshwater input, thus reducing the water footprint. The bioremediation process also resulted in a high removal efficiency in turbidity (>95 % CH, >76 % SC), total suspended solids (>93 % CH, >74 % SC), biochemical oxygen demand (BOD5) (>62 % CH, >93 % SC) and chemical oxygen demand (COD) (>63 % CH, >87 % SC), bringing the effluent into compliance with environmental regulations. Although nitrogen (>45 % CH, >57 % SC) and sulphate (>43 % CH, >35 % SC) removal efficiencies was high, potassium bioremediation was limited (<6 %). The proximate chemical composition of the microalgal biomass revealed different allocations to carbohydrates, lipids and proteins. The results suggest promising applications for biofuel production and aquaculture. This research highlights the potential of microalgae-based bioremediation for sustainable wastewater management in the explosives industry, contributing to the UN Sustainable Development Goals and promoting green industrial practices.

Monolignol Potential and Insights into Direct Depolymerization of Fruit and Nutshell Remains for High Value Sustainable Aromatics

The inedible parts of nuts and stone fruits are low-cost and lignin-rich feedstock for more sustainable production of aromatic chemicals in comparison with the agricultural and forestry residues. However, the depolymerization performances on food-related biomass remains unclear, owing to the broad physicochemical variations from the edible parts of the fruits and plant species. In this study, the monomer production potentials of ten major fruit and nutshell biomass were investigated with comprehensive numerical information derived from instrumental analysis, such as plant cell wall chemical compositions, syringyl/guaiacyl (S/G ratios, and contents of lignin substructure linkages (β-O-4, β-β, β-5). A standardized one-pot reductive catalytic fractionation (RCF) process was applied to benchmark the monomer yields, and the results were statistically analyzed. Among all the tested biomass, mango endocarp provided the highest monolignol yields of 37.1 % per dry substrates. Positive S-lignin (70-84 %) resulted in higher monomer yield mainly due to more cleavable β-O-4 linkages and less condensed C-C linkages. Strong positive relationships were identified between β-O-4 and S-lignin and between β-5 and G-lignin. The analytical, numerical, and experimental results of this study shed lights to process design of lignin-first biorefinery in food-processing industries and waste management works.

Recycling of waste calcium carbonate in lignocellulosic biorefining chain for chiral lactic acid production

One of the major end-products of lignocellulosic biorefining chain is the solid residues containing various compounds. The present approach to solid residues treatment is combustion for generation of heat and electricity. This study investigated the potential for recycling of the combustion ash from the solid residues after lignocellulosic dry biorefining process. A range of characterizations showed that the combustion ash contained a high amount of calcium carbonate. By recycling the ash as the neutralizer in biorefining process, the waste calcium carbonate in the ash was efficiently utilized for pretreated biomass neutralization and can replace 40 % of calcium hydroxide for lactic acid production. The chiral L-lactic acid titer reached 102.4 ± 3.6 g/L from 20 % (w/w) solids loading of wheat straw. Three feasible strategies of ash recycling for the investigated biorefinery concept were further proposed base on the rigorous calcium mass calculation, which can efficiently reduce the consumption of neutralizers.

Breakdown of hardly degradable carbohydrates (lignocellulose) in a two-stage anaerobic digestion plant is favored in the main fermenter

The yield and productivity of biogas plants depend on the degradation performance of their microbiomes. The spatial separation of the anaerobic digestion (AD) process into a separate hydrolysis and a main fermenter should improve cultivation conditions of the microorganisms involved in the degradation of complex substrates like lignocellulosic biomass (LCB) and, thus, the performance of anaerobic digesters. However, relatively little is known about such two-stage processes. Here, we investigated the process performance of a two-stage agricultural AD over one year, focusing on chemical and technical process parameters and metagenome-centric metaproteomics. Technical and chemical parameters indicated stable operation of the main fermenter but varying conditions for the open hydrolysis fermenter. Matching this, the microbiome in the hydrolysis fermenter has a higher dynamic than in the main fermenter. Metaproteomics-based microbiome analysis revealed a partial separation between early and common steps in carbohydrate degradation and primary fermentation in the hydrolysis fermenter but complex carbohydrate degradation, secondary fermentation, and methanogenesis in the main fermenter. Detailed metagenomics and metaproteomics characterization of the single metagenome-assembled genomes showed that the species focus on specific substrate niches and do not utilize their full genetic potential to degrade, for example, LCB. Overall, it seems that a separation of AD in a hydrolysis and a main fermenter does not improve the cleavage of complex substrates but significantly improves the overall process performance. In contrast, the remaining methanogenic activity in the hydrolysis fermenter may cause methane losses.

Interchangeable modular design and operation of photo-bioreactors for Chlorella vulgaris cultivation towards a zero-waste biorefinery

This study explores diverse cultivation modes for Chlorella vulgaris within a biorefinery at pilot scale that produces both biodiesel by transesterification of waste frying oils and syngas by gasification of organic wood waste. Given microalgae's comparatively modest biofuel yield relative to principal biorefinery products, the microalgae cultivation process is designed on the biofuels production rates. Liquid and gaseous waste streams are recycled inside the biorefinery: crude glycerol is mixed with wood to enhance the quality of syngas, wastewater is fed to microalgae so as flue gas. Also, the oil extracted from microalgae contributes to produce biodiesel and the waste cells are gasified. Considering that the optimal fit for each cultivation mode varies with the shape of the reactor, we propose a modular approach to assemble them in batteries of tubular, bubble flow, and airlift reactors, and present an operating design criterion that can fulfill the mass balance of the plant by adding/transforming the number of units inside the different batteries. Methods to adjust the operating conditions and control the operating parameters are also discussed. The designed configurations were operated recycling nominal waste streams of about 30 L d-1 of wastewater and 90 Nm3 h-1 of flue gas. Results confirm that the most advantageous one, in terms of volume per recycled waste streams, is a battery of 16 airlift reactors, operating in mixotrophic mode, with growing rate of 0.427 d-1, yield of 3.06, glycerol conversion 39 %, CO2 removal 64 % of inlet 6-10 %(mol) concentration. The same nominal waste streams can also be managed by 40 tubular reactors in almost heterotrophic conditions coupled with 12 bubble columns in autotrophic conditions; working respectively at growing rates of 0.395 d-1 and 0.362 d-1 and yields of 2.94 and 2.84. The battery of tubular reactors reached a glycerol conversion of 45 % and the array of bubble columns removed about 51 % of inlet 12-20 %(mol) CO2 concentration. A complete comparison is reported also in terms of dimensionless numbers and pumping/mixing requirements.

Polyhydroxyalkanoates production in biorefineries: A review on current status, challenges and opportunities

The need for a sustainable and circular bioeconomy model is imperative due to petroleum non-renewability, scarcity and environmental impacts. Biorefineries systems explore biomass to its maximum, being an important pillar for the development of circular bioeconomy. Polyhydroxyalkanoates (PHAs) can take advantage of biorefineries, as they can be produced using renewable feedstocks, and are potential substitutes for petrochemical plastics. The present work aims to evaluate the current status of the industrial development of PHAs production in biorefineries and PHAs contributions to the bioeconomy, along with future development points. Advancements are noticed when PHA production is coupled in wastewater treatment systems, when residues are used as substrate, and also when analytical methodologies are applied to evaluate the production process, such as the Life Cycle and Techno-Economic Analysis. For the commercial success of PHAs, it is established the need for dedicated investment and policies, in addition to proper collaboration of different society actors.

Syngas-driven sewage sludge conversion to microbial protein through H2S- and CO-tolerant hydrogen-oxidizing bacteria

Treating excess municipal sewage sludge (MSS) by means of thermochemical processes could enable its conversion into high-value microbial protein (MP) through syngas. Nevertheless, the variable composition and content of inhibitory compounds of the latter hinders the application potential of such a biorefinery scheme. Through a series of short- (48 to 96 h) and long-term (30 days) batch aerobic bioconversion tests, the present study aimed at investigating the potential of a mixed culture of hydrogen-oxidizing bacteria (HOB) to produce MP from a simulated syngas mixture characterized by variable H2 and CO2 concentrations, and different levels of CO and H2S as potential inhibitors of the HOB-driven process. Syngas was converted into MP with a protein content as high as 74 %, reaching biomass yields of 0.25 g VSS/g H2-COD, close to the maximum reported HOB yield of 0.28 g VSS/g H2-COD,  and volumetric productivities of 16 mg VSS/L/h. The potential of the process to provide between 50 and 100 % of the total nitrogen requirement of HOB solely by means of the gaseous ammonia nitrogen recovered through syngas was also preliminarily calculated. The presence of H2S and CO concentrations up to 0.4 % and up to 40 %, respectively, and a wide range of H2/CO2 ratios (2 - 10) had no negative influence on the main process performances. The role played by H2S- and CO-tolerant HOB species was fundamental to guarantee a high tolerance to microbial inhibitors, and demonstrated the high potential of mixed cultures for resource recovery and valorisation.

Effective application of immobilized second generation industrial Saccharomyces cerevisiae strain on consolidated bioprocessing

Integrated bioprocessing strategies can facilitate ethanol production from both cellulose and hemicellulose fractions of lignocellulosic biomass. Consolidated bioprocessing (CBP) is an approach that combines enzyme production, biomass hydrolysis and sugar fermentation in a single step. However, technologies that propose the use of microorganisms together with solid biomass present the difficulty of the recovery and reuse of the biocatalyst, which can be overcome by cell immobilization. In this regard, this work applied immobilized cells of AC14 yeast, a recombinant yeast that secretes 7 hydrolytic enzymes, in the CBP process in a successful proof-of-concept for the enzyme access to the substrate polymers. The most appropriate cell load for CBP under the conditions studied with immobilized cells was selected among three optical densities (OD) 10, 55 and 100. These experiments were performed with free cells to ensure that the results were not biased by mass limitations effects. OD 10 achieved 100% of the sugar consumption and the higher specific production of enzymes, being selected for further studies. Diffusional effects were observed with immobilized cells under static conditions. However, mass transfer limitations were mitigated under agitation, with an 18.5% increase in substrate consumption rate (from 2.7 to 3.5 g/L/h), reaching the same substrate uptake rates as free cells. In addition, immobilized cells achieved 100% hydrolysis and consumption of all substrates offered within only 12 h. Overall, this is the first report of a successful application of immobilized yeast cells in CBP processes for bioethanol production, a promising technology that can be extended to other biorefinery bioproducts.

Preparation of Aminals under Continuous Flow Conditions

A laboratory experiment was developed for the continuous flow preparation of an aminal derived from the condensation of furfural with morpholine. The experiment introduces the students to concepts of green chemistry, heterogeneous catalysis, and continuous flow. A cheap and easy setup allows the heterogeneous catalyst reactor to be built in class. The use of furfural reinforces the importance of green chemistry by using one of the key synthons obtained from biomass.

Innovative production of value-added products using agro-industrial wastes via solid-state fermentation

The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.

Exploration of characteristics and synthesis gas suitability for heat generation of coffee biomass pellets produced by single and co-pelletization

Production of coffee beans generates various types of biomass that can be applied as bioenergy for drying and roasting the beans. Thus, the aims of this study were to explore the characteristics of coffee biomass pellets (CBPs) produced from coffee cherry pulp (CCP), coffee parchment (CPM), and expired green coffee beans (ECB) by single and co-pelletization. The CBPs were then used to produce the synthesis gas in a downdraft gasifier, and the syngas properties were investigated for further heat applications. The results showed that single and co-pelletization of CCP and CPM performed well. The CBPs had good physiochemical properties in shape, size, and atomic ratios. The higher heating value and energy density of CBPs were 19.25-24.29 MJ/kg and 12.09-14.87 GJ/m3. The ash from CBPs was rich in K2O, CaO and MgO oxides, and the CPM ash had the lowest initial deformation temperature at 1136 °C. The ash samples from CBPs also had different slagging and fouling indexes. The syngas from CBPs mainly contained H2 (6.85-9.30%), CO (12.15-18.85%), and CO2 (10.85-13.75%). The heating value and tar concentration of syngas from CBPs were 3.24-4.32 MJ/m3 and 21.75-30.92 g/m3. The main chemical compounds in tar were styrene, phenol, caffeine, and pyrrole according to GC-MS. These results indicate that CCP and CPM have potential for pelletization and gasification to generate heat needed for coffee bean processing.

Algae-based approaches for Holistic wastewater management: A low-cost paradigm

Aquatic algal communities demonstrated their appeal for diverse industrial applications due to their vast availability, ease of harvest, lower production costs, and ability to biosynthesize valuable molecules. Algal biomass is promising because it can multiply in water and on land. Integrated algal systems have a significant advantage in wastewater treatment due to their ability to use phosphorus and nitrogen, simultaneously accumulating heavy metals and toxic substances. Several species of microalgae have adapted to thrive in these harsh environmental circumstances. The potential of algal communities contributes to achieving the United Nations' sustainable development goals in improving aquaculture, combating climate change, reducing carbon dioxide (CO2) emissions, and providing biomass as a biofuel feedstock. Algal-based biomass processing technology facilitates the development of a circular bio-economy that is both commercially and ecologically viable. An integrated bio-refinery process featuring zero waste discharge could be a sustainable solution. In the current review, we will highlight wastewater management by algal species. In addition, designing and optimizing algal bioreactors for wastewater treatment have also been incorporated.

Highly efficient synergistic activity of an α-L-arabinofuranosidase for degradation of arabinoxylan in barley/wheat

Here, an α-L-arabinofuranosidase (termed TtAbf62) from Thermothelomyces thermophilus is described, which efficiently removes arabinofuranosyl side chains and facilitates arabinoxylan digestion. The specific activity of TtAbf62 (179.07 U/mg) toward wheat arabinoxylan was the highest among all characterized glycoside hydrolase family 62 enzymes. TtAbf62 in combination with endoxylanase and β-xylosidase strongly promoted hydrolysis of barley and wheat. The release of reducing sugars was significantly higher for the three-enzyme combination relative to the sum of single-enzyme treatments: 85.71% for barley hydrolysis and 33.33% for wheat hydrolysis. HPLC analysis showed that TtAbf62 acted selectively on monosubstituted (C-2 or C-3) xylopyranosyl residues rather than double-substituted residues. Site-directed mutagenesis and interactional analyses of enzyme-substrate binding structures revealed the catalytic sites of TtAbf62 formed different polysaccharide-catalytic binding modes with arabinoxylo-oligosaccharides. Our findings demonstrate a "multienzyme cocktail" formed by TtAbf62 with other hydrolases strongly improves the efficiency of hemicellulose conversion and increases biomass hydrolysis through synergistic interaction.

Net zero emission in circular bioeconomy from microalgae biochar production: A renewed possibility

The rapid expansion of industrialization and continuous population growth have caused a steady increase in energy consumption. Despite using renewable energy, such as bioethanol, to replace fossil fuels had been strongly promoted, however the outcomes were underwhelming, resulting in excessive greenhouse gases (GHG) emissions. Microalgal biochar, as a carbon-rich material produced from the pyrolysis of biomass, provides a promising solution for achieving net zero emission. By utilizing microalgal biochar, these GHG emissions can be captured and stored efficiently. It also enhances soil fertility, improves water retention, and conduct bioremediation in agriculture and environmental remediation field. Moreover, incorporating microalgal biochar into a zero-waste biorefinery could boost the employ of biomass feedstocks effectively to produce valuable bioproducts while minimizing waste. This contributes to sustainability and aligns with the concepts of a circular bioeconomy. In addition, some challenges like commercialization and standardization will be addressed in the future.

Expression and Characterization of Laccase Lac1 from Coriolopsis trogii Strain Mafic-2001 in Pichia pastoris and Its Degradation of Lignin

The laccase gene (Lac1) was cloned from Coriolopsis trogii strain Mafic-2001. Full-length sequence of Lac1 containing 11 exons and 10 introns is composed of 2140 nucleotides (nts). mRNA of Lac1 encoded for a protein of 517 aa. Nucleotide sequence of the laccase was optimized and expressed in Pichia pastoris X-33. SDS-PAGE analysis showed that the molecular weight of the purified recombinant laccase rLac1 was about 70 kDa. The optimum temperature and pH of rLac1 were 40 ℃ and 3.0, respectively. rLac1 showed high residual activity (90%) in the solutions after 1 h incubation at the pH ranging from 2.5 to 8.0. rLac1 maintained over 60% of laccase activity at the temperatures ranging from 20 to 60 °C, and kept higher than 50% of its activity at 40 °C for 2 h. The activity of rLac1 was promoted by Cu2+ and inhibited by Fe2+. Under optimal conditions, lignin degradation rates of rLac1 on the substrates of rice straw, corn stover, and palm kernel cake were 50.24%, 55.49%, and 24.43% (the lignin contents of substrates untreated with rLac1 were 100%), respectively. Treated with rLac1, the structures of agricultural residues (rice straw, corn stover, and palm kernel cake) were obviously loosened which was reflected by the analysis of scanning electron microscopy and Fourier transform infrared spectroscopy. Based on the specific activity of rLac1 on the degradation of lignin, rLac1 from Coriolopsis trogii strain Mafic-2001 has the potential for in-depth utilization of agricultural residues.

Supercharging carbohydrate-binding module alone enhances endocellulase thermostability, binding, and activity on cellulosic biomass

Lignocellulosic biomass recalcitrance to enzymatic degradation necessitates high enzyme loadings incurring large processing costs for industrial-scale biofuels or biochemicals production. Manipulating surface charge interactions to minimize non-productive interactions between cellulolytic enzymes and plant cell wall components (e.g., lignin or cellulose) via protein supercharging has been hypothesized to improve biomass biodegradability, but with limited demonstrated success to date. Here we characterize the effect of introducing non-natural enzyme surface mutations and net charge on cellulosic biomass hydrolysis activity by designing a library of supercharged family-5 endoglucanase Cel5A and its native family-2a carbohydrate binding module (CBM) originally belonging to an industrially relevant thermophilic microbe Thermobifida fusca . A combinatorial library of 33 mutant constructs containing different CBM and Cel5A designs spanning a net charge range of -52 to 37 was computationally designed using Rosetta macromolecular modelling software. Activity for all mutants was rapidly characterized as soluble cell lysates and promising mutants (containing mutations either on the CBM, Cel5A catalytic domain, or both CBM and Cel5A domains) were then purified and systematically characterized. Surprisingly, often endocellulases with mutations on the CBM domain alone resulted in improved activity on cellulosic biomass, with three top-performing supercharged CBM mutants exhibiting between 2-5-fold increase in activity, compared to native enzyme, on both pretreated biomass enriched in lignin (i.e., corn stover) and isolated crystalline/amorphous cellulose. Furthermore, we were able to clearly demonstrate that endocellulase net charge can be selectively fine-tuned using protein supercharging protocol for targeting distinct substrates and maximizing biocatalytic activity. Additionally, several supercharged CBM containing endocellulases exhibited a 5-10 °C increase in optimal hydrolysis temperature, compared to native enzyme, which enabled further increase in hydrolytic yield at higher operational reaction temperatures. This study demonstrates the first successful implementation of enzyme supercharging of cellulolytic enzymes to increase hydrolytic activity towards complex lignocellulosic biomass derived substrates.

Functional characterization of fungal lytic polysaccharide monooxygenases for cellulose surface oxidation

BACKGROUND

Microbial lytic polysaccharide monooxygenases (LPMOs) cleave diverse biomass polysaccharides, including cellulose and hemicelluloses, by initial oxidation at C1 or C4 of glycan chains. Within the Carbohydrate-Active Enzymes (CAZy) classification, Auxiliary Activity Family 9 (AA9) comprises the first and largest group of fungal LPMOs, which are often also found in tandem with non-catalytic carbohydrate-binding modules (CBMs). LPMOs originally attracted attention for their ability to potentiate complete biomass deconstruction to monosaccharides. More recently, LPMOs have been applied for selective surface modification of insoluble cellulose and chitin.

RESULTS

To further explore the catalytic diversity of AA9 LPMOs, over 17,000 sequences were extracted from public databases, filtered, and used to construct a sequence similarity network (SSN) comprising 33 phylogenetically supported clusters. From these, 32 targets were produced successfully in the industrial filamentous fungus Aspergillus niger, 25 of which produced detectable LPMO activity. Detailed biochemical characterization of the eight most highly produced targets revealed individual C1, C4, and mixed C1/C4 regiospecificities of cellulose surface oxidation, different redox co-substrate preferences, and CBM targeting effects. Specifically, the presence of a CBM correlated with increased formation of soluble oxidized products and a more localized pattern of surface oxidation, as indicated by carbonyl-specific fluorescent labeling. On the other hand, LPMOs without native CBMs were associated with minimal release of soluble products and comparatively dispersed oxidation pattern.

CONCLUSIONS

This work provides insight into the structural and functional diversity of LPMOs, and highlights the need for further detailed characterization of individual enzymes to identify those best suited for cellulose saccharification versus surface functionalization toward biomaterials applications.

Isolation and Characterization of Xylanase from a Novel Strain, Penicillium menonorum SP10

Xylanase has been applied in various sectors, such as biomass conversion, paper, pulp, textiles, and pharmaceutical industries. This study aimed to isolate and screen potential xylanase-producing fungi from the soil of Suphan Buri Province, Thailand. Fifteen fungi were isolated, and their xylanase activities were tested by the qualitative method. The result showed that isolate SP3, SP10 and SP15 gave high xylanase activity with potency index (PI) of 2.32, 2.01 and 1.82, respectively. These fungi were selected for the xylanase quantitative test, isolate SP10 performed the highest xylanase activity with 0.535 U/mL. Through molecular methods using the β-tubulin gene, isolate SP10 was identified as Penicillium menonorum. The xylanase characteristics from P. menonorum SP10 were determined, including the xylanase isoforms and the optimum pH and temperature. The xylanase isoforms on SDS-PAGE indicated that P. menonorum SP10 produced two xylanases (45 and 54 kDa). Moreover, its xylanase worked optimally at pH 6 and 55 °C while reaching 61% activity at 65 °C. These results proposed P. menonorum SP10 as a good candidate for industrial uses, especially in poultry feed and pulp industries, to improve yield and economic efficiency under slightly acidic and high-temperature conditions.

An Exploratory Study of Hydrochar as a Matrix for Biotechnological Applications

This paper explores the potentialities of hydrochar in protein separation and enzyme immobilization for non-energy biorefinery applications of hydrothermal carbonization. An innovative experimental procedure monitors soluble protein-hydrochar interactions and enzymatic reactions in a continuously stirred tank reactor. The hydrochar comes from hydrothermal carbonization of silver fir (200 °C, 30 min, 1/7 solid/water ratio) and standard activation (KOH, oven, 600 °C). Bovine serum albumin, a non-active, globular protein, was adsorbed at ≤3300 mg/g. Sip's isotherms fitted data well (R2 = 0.99999). The immobilization used a commercial β-glucosidase, which catalyzes the hydrolysis of cellobiose to glucose, a bottleneck of the cellulose to fermentable sugar bioconversion network due to the fast enzyme deactivation. The hydrochar adsorbed ≤26 w/w% of enzyme. The heterogeneous biocatalyst operational stability was 24 times that of the soluble one. The results encourage further investigations and foreshadow process schemes coupling hydrothermal carbonization and industrial bioconversions.

Innovation in lignocellulosics dewatering and drying for energy sustainability and enhanced utilization of forestry, agriculture, and marine resources - A review

Efficient utilization of forestry, agriculture, and marine resources in various manufacturing sectors requires optimizing fiber transformation, dewatering, and drying energy consumption. These processes play a crucial role in reducing the carbon footprint and boosting sustainability within the circular bioeconomy framework. Despite efforts made in the paper industry to enhance productivity while conserving resources and energy through lower grammage and higher machine speeds, reducing thermal energy consumption during papermaking remains a significant challenge. A key approach to address this challenge lies in increasing dewatering of the fiber web before entering the dryer section of the paper machine. Similarly, the production of high-value-added products derived from alternative lignocellulosic feedstocks, such as nanocellulose and microalgae, requires advanced dewatering techniques for techno-economic viability. This critical and systematic review aims to comprehensively explore the intricate interactions between water and lignocellulosic surfaces, as well as the leading technologies used to enhance dewatering and drying. Recent developments in technologies to reduce water content during papermaking, and advanced dewatering techniques for nanocellulosic and microalgal feedstocks are addressed. Existing research highlights several fundamental and technical challenges spanning from the nano- to macroscopic scales that must be addressed to make lignocellulosics a suitable feedstock option for industry. By identifying alternative strategies to improve water removal, this review intends to accelerate the widespread adoption of lignocellulosics as feasible manufacturing feedstocks. Moreover, this review aims to provide a fundamental understanding of the interactions, associations, and bonding mechanisms between water and cellulose fibers, nanocellulosic materials, and microalgal feedstocks. The findings of this review shed light on critical research directions necessary for advancing the efficient utilization of lignocellulosic resources and accelerating the transition towards sustainable manufacturing practices.

Enhancing 1,3-Propanediol Productivity in the Non-Model Chassis Clostridium beijerinckii through Genetic Manipulation

Biotechnological processes at biorefineries are considered one of the most attractive alternatives for valorizing biomasses by converting them into bioproducts, biofuels, and bioenergy. For example, biodiesel can be obtained from oils and grease but generates glycerol as a byproduct. Glycerol recycling has been studied in several bioprocesses, with one of them being its conversion to 1,3-propanediol (1,3-PDO) by Clostridium. Clostridium beijerinckii is particularly interesting because it can produce a range of industrially relevant chemicals, including solvents and organic acids, and it is non-pathogenic. However, while Clostridium species have many potential advantages as chassis for synthetic biology applications, there are significant limitations when considering their use, such as their limited genetic tools, slow growth rate, and oxygen sensitivity. In this work, we carried out the overexpression of the genes involved in the synthesis of 1,3-PDO in C. beijerinckii Br21, which allowed us to increase the 1,3-PDO productivity in this strain. Thus, this study contributed to a better understanding of the metabolic pathways of glycerol conversion to 1,3-PDO by a C. beijerinckii isolate. Also, it made it possible to establish a transformation method of a modular vector in this strain, therefore expanding the limited genetic tools available for this bacterium, which is highly relevant in biotechnological applications.

Cellulose acylation in homogeneous and heterogeneous media: Optimization of reactions conditions

The dependence of the DS on the acid anhydride/anhydroglucose unit ((RCO)₂O/AGU) molar ratio was correlated using second-order polynomials. The regression coefficients of the (RCO)₂O/AGU terms showed that increasing the length of the RCO group of the anhydride led to lower values of DS. For acylation under heterogeneous reaction conditions, the following were employed: acid anhydrides and butyryl chloride as acylating agents; iodine as a catalyst; N,N-dimethylformamide (DMF) as a solvent, pyridine, and triethylamine as solvents and catalysts. For acylation using acetic anhydride plus iodine, the values of DS correlate with reaction time by a second-order polynomial. Due to its role as a polar solvent and a nucleophilic catalyst, pyridine was the most effective base catalyst, independent of the acylating agent (butyric anhydride and butyryl chloride).

Oxidative torrefaction of microalgae Chlorella sorokiniana: Process optimization by central composite design

Microalgae are currently not viable as solid biofuels owing to their poor raw fuel properties. Torrefaction under oxidative media offers a cost-effective and energy-efficient process to address these drawbacks. A design of experiment was conducted using central composite design with three factors: temperature (200, 250, and 300 °C), time (10, 35, and 60 min), and O₂ concentration (3, 12, and 21 vol%). The responses were solid yield, energy yield, higher heating value, and onset temperatures at 50% and 90% carbon conversion determined from thermogravimetric analysis. Temperature and time significantly affected all responses, while O₂ concentration only affected higher heating value, energy yield and thermodegradation temperature at 90% conversion. Oxidative torrefaction of microalgae is recommended to be conducted at 200 °C, 10.6 min, 12% O₂ where the energy yield and enhancement factor are 98.73% and 1.08, respectively. It is also more reactive under an air environment compared to inert torrefaction conditions.

Renewable synthesis of γ-butyrolactone from biomass-derived 2-furanone using palladium supported on humin-derived activated carbon (Pd/HAC) as a heterogeneous catalyst

This work reports a high-yielding synthesis of γ-butyrolactone (GBL), a promising biofuel, renewable solvent, and sustainable chemical feedstock, by the catalytic hydrogenation of 2-furanone. 2-Furanone can be synthesized renewably by the catalytic oxidation of xylose-derived furfural (FUR). Humin, produced during the preparation of FUR from xylose, was carbonized to form humin-derived activated carbon (HAC). Palladium supported on humin-derived activated carbon (Pd/HAC) was used as an efficient and recyclable catalyst for hydrogenating 2-furanone into GBL. The process was optimized in various reaction parameters, such as temperature, catalyst loading, hydrogen pressure, and solvent. Under optimized conditions (RT, 0.5 MPa H₂, THF, 3 h), the 4% Pd/HAC (5 wt% loading) catalyst afforded GBL in an 89% isolated yield. Under identical conditions, an 85% isolated yield of γ-valerolactone (GVL) was obtained starting from biomass-derived angelica lactone. Moreover, the Pd/HAC catalyst was conveniently recovered from the reaction mixture and successfully recycled for five consecutive cycles with only a marginal decrease in the yield of GBL.

Fabrication of Graphitized Carbon Fibers from Fusible Lignin and Their Application in Supercapacitors

Lignin-based carbon fibers (LCFs) with graphitized structures decorated on their surfaces were successfully prepared using the simultaneous catalyst loading and chemical stabilization of melt-spun lignin fibers, followed by quick carbonization functionalized as catalytic graphitization. This technique not only enables surficial graphitized LCF preparation at a relatively low temperature of 1200 °C but also avoids additional treatments used in conventional carbon fiber production. The LCFs were then used as electrode materials in a supercapacitor assembly. Electrochemical measurements confirmed that LCF-0.4, a sample with a relatively low specific surface area of 89.9 m2 g-1, exhibited the best electrochemical properties. The supercapacitor with LCF-0.4 had a specific capacitance of 10.7 F g-1 at 0.5 A g-1, a power density of 869.5 W kg-1, an energy density of 15.7 Wh kg-1, and a capacitance retention of 100% after 1500 cycles, even without activation.

Production of Alkyl Levulinates from Carbohydrate-Derived Chemical Intermediates Using Phosphotungstic Acid Supported on Humin-Derived Activated Carbon (PTA/HAC) as a Recyclable Heterogeneous Acid Catalyst

This work reports a straightforward and high-yielding synthesis of alkyl levulinates (ALs), a class of promising biofuel, renewable solvent, and chemical feedstock of renewable origin. ALs were prepared by the acid-catalyzed esterification of levulinic acid (LA) and by the alcoholysis of carbohydrate-derived chemical platforms, such as furfuryl alcohol (FAL) and α-angelica lactone (α-AGL). Phosphotungstic acid (PTA) was chosen as the solid acid catalyst for the transformation, which was heterogenized on humin-derived activated carbon (HAC) for superior recyclability. Using HAC as catalyst support expands the scope of valorizing humin, a complex furanic resin produced inevitably as a side product (often considered waste) during the acid-catalyzed hydrolysis/dehydration of sugars and polymeric carbohydrates. Under optimized conditions (150 °C, 7 h, 25 wt.% of 20%PTA/HAC-600 catalyst), ethyl levulinate (EL) was obtained in an 85% isolated yield starting from FAL. Using the general synthetic protocol, EL was isolated in 88% and 84% yields from LA and α-AGL, respectively. The 20%PTA/HAC-600 catalyst was successfully recovered from the reaction mixture and recycled for five cycles. A marginal loss in the yield of ALs was observed in consecutive catalytic cycles due to partial leaching of PTA from the HAC support.

Enabling growth-decoupled Komagataella phaffii recombinant protein production based on the methanol-free PDH promoter

The current transition towards the circular bioeconomy requires a rational development of biorefineries to sustainably fulfill the present demands. The use of Komagataella phaffii (Pichia pastoris) can meet this challenge, since it has the capability to use crude glycerol as a carbon-source, a by-product from the biodiesel industry, while producing high- and low-added value products. Recombinant protein production (RPP) using K. phaffii has often been driven either by the methanol induced AOX1 promoter (P_AOX1) and/or the constitutive GAP promoter (P_GAP). In the last years, strong efforts have been focused on developing novel expression systems that expand the toolbox variety of K. phaffii to efficiently produce diverse proteins that requires different strategies. In this work, a study was conducted towards the development of methanol-free expression system based on a heat-shock gene promoter (P_DH) using glycerol as sole carbon source. Using this promoter, the recombinant expression is strongly induced in carbon-starving conditions. The classical P_GAP was used as a benchmark, taking for both strains the lipase B from Candida antarctica (CalB) as model protein. Titer of CalB expressed under P_DH outperformed P_GAP controlled expression in shake-flask cultivations when using a slow-release continuous feeding technology, confirming that P_DH is induced under pseudo-starving conditions. This increase was also confirmed in fed-batch cultivations. Several optimization rounds were carried out for P_DH under different feeding and osmolarity conditions. In all of them the P_DH controlled process outperformed the P_GAP one in regard to CalB titer. The best P_DH approach reached 3.6-fold more specific productivity than P_GAP fed-batch at low μ. Compared to the optimum approach for P_GAP-based process, the best P_DH fed-batch strategy resulted in 2.3-fold higher titer, while the specific productivity was very similar. To summarize, P_DH is an inducible promoter that exhibited a non-coupled growth regulation showing high performance, which provides a methanol-free additional solution to the usual growth-coupled systems for RPP. Thus, this novel system emerges as a potential alternative for K. phaffii RPP bioprocess and for revaluing crude glycerol, promoting the transition towards a circular economy.

What's stopping the waste-treatment industry from adopting emerging circular technologies? An agent-based model revealing drivers and barriers

Many new circular economy technologies are gaining momentum, yet research on the complexity of adoption decisions driven by uncertainties, both at technology and ecosystem level, is lacking. In the present study, an agent-based model was developed to study factors that influence the adoption of emerging circular technologies. The case of the waste treatment industry was chosen, specifically its (non-) adoption of the so-called "Volatile Fatty Acid Platform", a circular economy technology that facilitates both the valorization of organic waste into high-end products as well as their sale on global markets. Model results show adoption rates under 60% due to effects of subsidies, market growth, technological uncertainty and social pressure. Furthermore, the conditions were revealed under which certain parameters have the most effect. An agent-based model enabled use of a systemic approach to reveal the mechanisms of circular emerging technology innovation that are most relevant for researchers and waste treatment stakeholders.

Sugar Beet Pulp as a Biorefinery Substrate for Designing Feed

An example of the implementation of the principles of the circular economy is the use of sugar beet pulp as animal feed. Here, we investigate the possible use of yeast strains to enrich waste biomass in single-cell protein (SCP). The strains were evaluated for yeast growth (pour plate method), protein increment (Kjeldahl method), assimilation of free amino nitrogen (FAN), and reduction of crude fiber content. All the tested strains were able to grow on hydrolyzed sugar beet pulp-based medium. The greatest increases in protein content were observed for Candida utilis LOCK0021 and Saccharomyces cerevisiae Ethanol Red (ΔN = 2.33%) on fresh sugar beet pulp, and for Scheffersomyces stipitis NCYC1541 (ΔN = 3.04%) on dried sugar beet pulp. All the strains assimilated FAN from the culture medium. The largest reductions in the crude fiber content of the biomass were recorded for Saccharomyces cerevisiae Ethanol Red (Δ = 10.89%) on fresh sugar beet pulp and Candida utilis LOCK0021 (Δ = 15.05%) on dried sugar beet pulp. The results show that sugar beet pulp provides an excellent matrix for SCP and feed production.

Hemp Waste as a Substrate for Hermetia illucens (L.) (Diptera: Stratiomyidae) and Tenebrio molitor L. (Coleoptera: Tenebrionidae) Rearing

The proper treatment of cannabis agricultural wastes can reduce the environmental impact of its cultivation and generate valuable products. This study aimed to test the potential of cannabis agricultural wastes as a substrate for the rearing of black soldier fly larvae (BSFL) and yellow mealworms (MW). In the case of BSFL, replacing the fibre component (straw) in the substrate with the hemp waste can increase the nutritional value of the substrate and led to bigger larvae. The bigger larvae had lower P and Mg, and higher Fe and Ca. Crude protein also varied based on the size of larvae and/or the content of protein in the initial substrate, which was boosted by replacing straw with hemp material. No other cannabinoids than cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), and cannabidiol (CBD) were found in significant amounts in the larvae. In the case of MW, the larvae grew less on the hemp material in comparison to wheat bran. Replacing wheat bran with the hemp material led to smaller larvae with higher Ca, Fe, K, and crude protein content, but lower Mg and P values. No cannabinoids were detected in the MW fed with the hemp material.

Deep eutectic solvents for improved biomass pretreatment: Current status and future prospective towards sustainable processes

Pretreatment processes - recognized as critical steps for efficient biomass refining - have received much attention over the last two decades. In this context, deep eutectic solvents (DES) have emerged as a novel alternative to conventional solvents representing a step forward in achieving more sustainable processes with both environmental and economic benefits. This paper presents an updated review of the state-of-the-art of DES-based applications in biorefinery schemes. Besides describing the fundamentals of DES composition, synthesis, and recycling, this study presents a comprehensive review of existing techno-economic and life cycle assessment studies. Challenges, barriers, and perspectives for the scale-up of DES-based processes are also discussed.

Design of biorefineries towards carbon neutrality: A critical review

The increase in worldwide demand for energy is driven by the rapid increase in population and exponential economic development. This resulted in the fast depletion of fossil fuel supplies and unprecedented levels of greenhouse gas in the atmosphere. To valorize biomass into different bioproducts, one of the popular and carbon-neutral alternatives is biorefineries. This system is an appropriate technology in the circular economy model. Various research highlighted the role of biorefineries as a centerpiece in the carbon-neutral ecosystem of technologies of the circular economy model. To fully realize this, various improvements and challenges need to be addressed. This paper presents a critical and timely review of the challenges and future direction of biorefineries as an alternative carbon-neutral energy source.

Machine learning and statistical analysis for biomass torrefaction: A review

Torrefaction is a remarkable technology in biomass-to-energy. However, biomass has several disadvantages, including hydrophilic properties, higher moisture, lower heating value, and heterogeneous properties. Many conventional approaches, such as kinetic analysis, process modeling, and computational fluid dynamics, have been used to explain torrefaction performance and characteristics. However, they may be insufficient in actual applications because of providing only some specific solutions. Machine learning (ML) and statistical approaches are powerful tools for analyzing and predicting torrefaction outcomes and even optimizing the thermal process for its utilization. This state-of-the-art review aims to present ML-assisted torrefaction. Artificial neural networks, multivariate adaptive regression splines, decision tree, support vector machine, and other methods in the literature are discussed. Statistical approaches (SAs) for torrefaction, including Taguchi, response surface methodology, and analysis of variance, are also reviewed. Overall, this review has provided valuable insights into torrefaction optimization, which is conducive to biomass upgrading for achieving net zero.

Production of phycobiliproteins, bioplastics and lipids by the cyanobacteria Synechocystis sp. treating secondary effluent in a biorefinery approach

Cyanobacteria have been identified as promising organisms to reuse nutrients from waste effluents and produce valuable compounds such as lipids, polyhydroxyalkanoates (PHAs), and pigments. However, almost all studies on cyanobacterial biorefineries have been performed under lab scale and short cultivation periods. The present study evaluates the cultivation of the cyanobacterium Synechocystis sp. in a pilot scale 30 L semi-continuous photobioreactor fed with secondary effluent for a period of 120 days to produce phycobiliproteins, polyhydroxybutyrate (PHB) and lipids. To this end, the harvested biomass from the semi-continuous photobioreactor was transferred into 5 L vertical column batch photobioreactors to perform PHB and lipid accumulation under nutrient starvation. Three hydraulic retention times (HRT) (6, 8 and 10 days) were tested in the semi-continuous photobioreactor to evaluate its influence on biomass growth and microbial community. A maximum biomass concentration of 1.413 g L^-1 and maximum productivity of 173 mg L^-1 d^-1 was reached under HRT of 8 days. Microscopy analysis revealed a shift from Synechocystis sp. to Leptolyngbya sp. and green algae when HRT of 6 days was used. Continuous, stable production of phycobiliproteins in the semi-continuous photobioreactor was obtained, reaching a maximum content of 7.4%_dcw in the biomass. In the batch photobioreactors a PHB content of 4.8%_dcw was reached under 7 days of nitrogen and phosphorus starvation, while a lipids content of 44.7%_dcw was achieved under 30 days of nitrogen starvation. PHB and lipids production was strongly dependent on the amount of nutrients withdrawn from the grow phase. In the case of lipids, their production was stimulated when there was only phosphorus depletion. While Nitrogen and phosphorus limitation was needed to enhance the PHB production. In conclusion, this study demonstrates the feasibility of cultivating cyanobacteria in treated wastewater to produce bio-based valuable compounds within a circular bioeconomy approach.

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions resulting in the utmost threat to the environment and subsequently which leads to global climate changes. As far as sustainability is concerned, fuels and materials derived from organic or plant wastes overcome this downside establishing the solution to the fossil resource crisis. In this context, exploration of agricultural residue appears to be a suitable alternative of non-renewable resources to support the environmental feasibility and meet the high energy crisis. The use of agricultural waste as a feedstock for the biorefinery approach emerges to be an eco-friendly process for the production of biofuel and value-added chemicals, intensifying energy security. Therefore, a prospective choice of this renewable biomass for the synthesis of green fuel and other green biochemicals comes up with a favorable outcome in terms of cost-effectiveness and sustainability. Exploiting different agricultural biomass and exploring various biomass conversion techniques, biorefinery generates bioenergy in a strategic way which eventually fits in a circular bioeconomy. Sources and production of agricultural waste are critically explained in this paper, which provides a path for further value addition by various technologies. Biorefinery solutions, along with a life cycle assessment of agricultural waste biomass toward a wide array of value-added products aiding the bioeconomy, are summarized in this paper.

Microwave-assisted cassava pulp hydrolysis as food waste biorefinery for biodegradable polyhydroxybutyrate production

Cassava pulp is one of the most abundant agricultural residues that can cause serious disposal problems. This study aimed to apply a biorefinery approach by examining the feasibility of microwave-assisted cassava pulp hydrolysis to attain sustainable management and efficient use of natural resources. Four factors, namely, the liquid-to-solid ratio (20 mL/g, 10 mL/g, 7.5 mL/g, and 5 mL/g), types of acids (H₂SO₄ and H₃PO₄), watt power (600 W, 700 W, and 800 W) and time (3, 5 and 8 min), were carefully investigated. The highest fermentable sugar content of 88.1 g/L ± 0.7 g/L (0.88 g fermentable sugars/g dry cassava pulp) was achieved when 20 mL/g cassava pulp was hydrolyzed with 2.5% (v/v) H₂SO₄ under microwave irradiation at 800 W for 8 min. Glucose was a major product (82.0 g/L ± 5.2 g/L). The inhibitor concentration was 5.17 g/L ± 0.01 g/L, and the levulinic acid concentration was 5.15 g/L ± 0.01 g/L. The results indicated that the liquid-to-solid ratio, diluted acid concentration, irradiation watt power and time were important factors in producing fermentable sugars from acid hydrolysis under microwave irradiation. The crude hydrolysate was used for PHB production by Cupriavidus necator strain A-04. The hydrolysate to nutrients ratio of 30:70 (v/v) yielded a cell dry weight of 7.5 g/L ± 0.1 g/L containing PHB content of 66.8% ± 0.3% (w/w), resulting in a yield Y P / S (g-PHB/g- S P H B ) of 0.35 g/g. This study demonstrated that the microwave-assisted cassava pulp hydrolysate developed in this study provided a high amount of glucose (88.1% conversion) and resulted in a low concentration of inhibitors without xylose; this was successfully achieved without pregelatinization, alkaline pretreatment or detoxification.

Biorefinery and sustainability for the production of biofuels and value-added products: A trends analysis based on network and patent analysis

Biorefineries are modern mechanisms used for producing value-added products and biofuels from different biomass sources. However, a crucial challenge is to achieve a sustainable model for their adequate implementation. Challenges related to technical efficiency and economic feasibility are two of the most relevant problems. Therefore, the present study sought to determine the current trends in basic research and technological development around biorefining and sustainability. We carried out a co-occurrence analysis and a patent analysis using data obtained from the Scopus and Lens databases to provide a general overview of the current state of this area of knowledge. The co-occurrence analysis intends to provide an overview of biorefining and sustainability based on terms associated with these two concepts as a starting point to determine the progress and existing challenges of the field. The results of the patent analysis consisted in identifying the main technological sectors, applicants, and territories where inventions associated with biorefining are registered. The analysis of the information showed that bioeconomy, techno-economic aspects, circular economy, technical issues associated with biomass production, and biofuels represent the focal point of basic research in a wide range of disciplines. Technology development is focused on fermentation, enzymes, and microorganisms, among other areas, which shows the validity of these traditional techniques in addressing the problems faced by the bioeconomy. This scenario shows that developed economies are the driving force behind this area of knowledge and that the PCT system is fundamental for the protection and commercialization of these inventions in places different from where they originated. Furthermore, the challenge lies in learning to work in alternative and complementary technological sectors, beyond microbiology and enzyme applications, in pursuit of the sector's technical and economic feasibility.

Upgrading of Biobased Glycerol to Glycerol Carbonate as a Tool to Reduce the CO2 Emissions of the Biodiesel Fuel Life Cycle

With regards to oil-based diesel fuel, the adoption of bio-derived diesel fuel was estimated to reduce CO₂ emissions by approximately 75%, considering the whole life cycle. In this paper, we present a novel continuous-flow process able to transfer an equimolar amount of CO₂ (through urea) to glycerol, producing glycerol carbonate. This represents a convenient tool, able to both improve the efficiency of the biodiesel production through the conversion of waste streams into added-value chemicals and to beneficially contribute to the whole carbon cycle. By means of a Design of Experiments approach, the influence of key operating variables on the product yield was studied and statistically modeled.

Biohydrogen in a circular bioeconomy: A critical review

Hydrogen produced from biomass feedstocks is considered an effective solution in moving toward a decarbonized economy. Biohydrogen is a clean energy source that has gained global attention for adoption as it promises to mitigate climate change and human environmental damage. Through the circular economy framework, sustainable biohydrogen production with other bioproducts while addressing issues such as waste management is possible. This study presents a comprehensive review of the various biomass feedstocks and processing technologies associated with biohydrogen generation, as well as the possible integration of existing industries into a circular bioeconomy framework. The currently standing challenges and future perspectives are also discussed.

Emerging innovations for sustainable production of bioethanol and other mercantile products from circular economy perspective

Biogenic municipal solid waste (BMSW) and food waste (FW) with high energy density are ready to tap renewable resources for industrial scale ethanol refinery foreseen for establishing bio-based society. Circular economy has occupied limelight in the domain of renewable energy and sustainable chemicals production. The present review highlights the importance of BMSW/FW as newer feed reserves that can cater as parent molecules for an array of high-visibility industrial products along with bioethanol upon implementing a judicious closed-cascade mass-flow mechanism enabling ultimate feed and waste stream valorisation. Though these organics are attractive resources their true potential for energy production has not been quantified yet owing to their heterogeneous composition and associated technical challenges thus pushing waste refinery and industrial symbiosis concepts to backseat. To accelerate this industrial vision, the novel bioprocessing strategies for enhanced and low-cost production of bioethanol from BMSW/FW along with other commercially imperative product portfolio have been discussed.

Bisoactive metabolite profile and antioxidant properties of brown juice, a processed Alfalfa (Medicago sativa) by-product

Recently, leaf protein concentrate (LPC) has gained increased attention in response to the constantly growing protein demand. Green biorefineries can become more economical by valorizing their by-products and reducing environmental risks. The current study describes the variations in the antioxidant capacity and phytochemical composition of a liquid by-product (referred to as brown juice (BJ)) obtained during the extraction of leaf protein concentrate (LPC) from the fresh biomass of alfalfa (Medicago sativa L.). Four varieties of alfalfa were investigated during three harvest times, i.e., August 2017 (first harvest), September 2017 (second harvest), and June 2018 (third harvest). Also, the fresh BJ was lacto-fermented to extend its preservation period but also modifying its composition. The results of different general phytochemical composition analyses and antioxidant assays revealed similar tendencies across different alfalfa varieties and harvest times. Most of the phytochemicals in the BJ identified by HPLC-MS/MS can be classified as flavonoids/flavonoid derivatives, e.g., apigenin, naringenin, luteolin, formononetin. Substantially, the lacto-fermentation process induced a switch into aglycones, e.g., apigenin content increased by an order of magnitude, while apigenin-7-O-glucuronide content was halved after lacto-fermentation. Additionally, several B vitamins were detected, including B2, B3, and B7. These results could provide a basis for various ways of industrial valorization but need to be strengthened by data generated from large-scale production.

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

The Application of Metagenomics to Study Microbial Communities and Develop Desirable Traits in Fermented Foods

The microbial communities present within fermented foods are diverse and dynamic, producing a variety of metabolites responsible for the fermentation processes, imparting characteristic organoleptic qualities and health-promoting traits, and maintaining microbiological safety of fermented foods. In this context, it is crucial to study these microbial communities to characterise fermented foods and the production processes involved. High Throughput Sequencing (HTS)-based methods such as metagenomics enable microbial community studies through amplicon and shotgun sequencing approaches. As the field constantly develops, sequencing technologies are becoming more accessible, affordable and accurate with a further shift from short read to long read sequencing being observed. Metagenomics is enjoying wide-spread application in fermented food studies and in recent years is also being employed in concert with synthetic biology techniques to help tackle problems with the large amounts of waste generated in the food sector. This review presents an introduction to current sequencing technologies and the benefits of their application in fermented foods.