Role of biomass-derived carbon-based composite accelerants in enhanced anaerobic digestion: Focusing on biogas yield, fertilizer utilization, and density functional theory calculations

Enhancement of anaerobic treatment of antibiotic pharmaceutical wastewater through the development of iron-based and carbon-based materials: A critical review

The extensive use of antibiotics has created an urgent need to address antibiotic wastewater treatment, posing significant challenges for environmental protection and public health. Recent advances in the efficacy and mechanisms of conductive materials (CMs) for enhancing the anaerobic biological treatment of antibiotic pharmaceutical wastewater are reviewed. For the first time, the focus is on the various application forms of iron-based and carbon-based CMs in strengthening the anaerobic methanogenic system. This includes the use of single CMs such as zero-valent iron (ZVI), magnetite, biochar (BC), activated carbon (AC), and graphene (GP), as well as iron-based and carbon-based composite CMs with diverse structures. These structures include mixed, surface-loaded, and core-shell combinations, reflecting the development of CMs. Iron-based and carbon-based CMs promote the rapid removal of antibiotics through adsorption and enhanced biodegradation. They also mitigate the inhibitory effects of toxic pollutants on microbial activity and reduce the expression of antibiotic resistance genes (ARGs). Additionally, as effective electron carriers, these CMs enrich microorganisms with direct interspecies electron transfer (DIET) functions, accelerate interspecies electron transfer, and facilitate the conversion of organic matter into methane. Finally, this review proposes the use of advanced molecular detection technologies to clarify microbial ecology and metabolic mechanisms, along with microscopic characterization techniques for the modification of CMs. These methods can provide more direct evidence to analyze the mechanisms underlying the cooperative anaerobic treatment of refractory organic wastewater by CMs and microorganisms.

Enhanced methane production from anaerobic digestion of waste activated sludge with weak magnetic field: Insights into performances and mechanisms

The impact of weak magnetic field (WMF) on anaerobic digestion (AD) performance of waste activated sludge (WAS) and underlying mechanism were investigated. Results showed that WMF significantly stimulated the methane yield by 12.9∼25.1% with 15 and 30 mT WMF addition, but high WMF (60 mT) attenuated the positive effect. The WMF enriched the anaerobic microbes, especially the acetoclastic and hydrogenotrophic methanogen. Additionally, the WMF dramatically facilitated the metabolic pathways of key enzymes for methanogenesis, which was validated by the significant increase of absolute abundance of anaerobic functional genes (mcrA). The enzyme activities of ATP and F420 were also significantly promoted by 30 mT WMF, but high WMF (60 mT) resulted in increased activity of lactate dehydrogenase. This study reveals that low WMF can promote AD performance of WAS through enhancing microbial activities especially methanogen, but high WMF leads to the loss of cell membrane integrity and attenuates its positive effect.

A data-driven approach for revealing the linkages between differences in electrochemical properties of biochar during anaerobic digestion using automated machine learning

Biochar is commonly used to enhance the anaerobic digestion of organic waste solids and wastewater, due to its electrochemical properties, which intensify the electron transfer of microorganisms attached to its large surface area. However, it is difficult to create biochar with both high conductivity and high capacitance, which makes selecting the right biochar for engineering applications challenging. To address this issue, two Auto algorithms (TPOT and H2O) were applied to model the effects of different biochar properties on anaerobic digestion processes. The results showed that the gradient boosting machine had the highest predictive accuracy (R2 = 0.96). Feature importance analysis showed that feedstock concentration, digestion time, capacitance, and conductivity of biochar were the main factors affecting methane yield. According to the two-dimensional (2D) partial dependence plots, high-capacitance biochar (0.27-0.29 V·mA) is favorable for substrates with low-solid content (< 19.6 TS%), while the high-conductivity biochar (80.82-170.58 mS/cm) is suitable for high-solids substrates (> 20.1 TS%). The software, based on the optimal model, can be used to obtain the ideal range of biochar for AD trials, aiding researchers in practical applications prior to implementation.

Comparison of anaerobic digestion of starch- and petro-based bioplastic under hydrogen-rich conditions

To identify an economically viable waste management system for bioplastics, thermoplastic starch (TPS) and poly(butylene adipate-co-terephthalate) (PBAT) were anaerobically digested under hydrogen (H2)/carbon dioxide (CO2) and nitrogen (N2) gas-purged conditions to compare methane (CH4) production and biodegradation. Regardless of the type of bioplastics, CH4 production was consistently higher with H2/CO2 than with N2. The highest amount of CH4 was produced at 307.74 mL CH4/g volatile solids when TPS digested with H2/CO2. A stepwise increased in CH4 yield was observed, with a nominal initial increment followed by accelerated methanogenesis conversion as H2 was depleted. This may be attributed to a substantial shift in the microbial structure from hydrogenotrophic methanogen (Methanobacteriales and Methanomicrobiales) to heterotrophs (Spirochaetia). In contrast, no significant change was observed with PBAT, regardless of the type of purged gas. TPS was broken down into numerous derivatives, including volatile fatty acids. TPS produced more byproducts with H2/CO2 (i.e., 430) than with N2 (i.e., 320). In contrast, differential scanning calorimetry analysis on PBAT revealed an increase in crystallinity from 10.20 % to 12.31 % and 11.36 % in the H2/CO2- and N2-purged conditions, respectively, after 65 days of testing. PBAT surface modifications were characterized via Fourier transform infrared spectroscopy and scanning electron microscopy. The results suggest that the addition of H2/CO2 can enhance the CH4 yield and increase the breakdown rate of TPS more than that of PBAT. This study provides novel insights into the CH4 production potential of two bioplastics with different biodegradabilities in H2/CO2-mediated anaerobic digestion systems.

Functional biochar in enhanced anaerobic digestion: Synthesis, performances, and mechanisms

Anaerobic digestion technology is crucial in bioenergy recovery and organic waste management. At the same time, it often encounters challenges such as low organic digestibility and inhibition of toxic substances, resulting in low biomethane yields. Biochar has recently been used in anaerobic digestion to alleviate toxicity inhibition, improve the stability of anaerobic digestion processes, and increase methane yields. However, the practical application of biochar is limited, for the properties of pristine biochar significantly affect its application in anaerobic digestion. Although much research focuses on understanding original biochar's fundamental properties and functionalization, there are few reviews on the applications of functional biochar and the effects of critical properties of pristine biochar on anaerobic digestion. This review systematically reviewed functionalization strategies, key performances, and applications of functional biochar in anaerobic digestion. The properties determining the role of biochar were reviewed, the synthesis methods of functional biochar were summarized and compared, the mechanism of functional biochar was discussed, and the factors affecting the function of functional biochar were reviewed. This review provided a comprehensive understanding of functional biochar in anaerobic digestion processes, which would be helpful for the development and applications of engineered biochar.

Assessment of biodegradation of lignocellulosic fiber-based composites - A systematic review

Lignocellulosic fiber-reinforced polymer composites are the most extensively used modern-day materials with low density and better specific strength specifically developed to render better physical, mechanical, and thermal properties. Synthetic fiber-reinforced composites face some serious issues like low biodegradability, non-environmentally friendly, and low disposability. Lignocellulosic or natural fiber-reinforced composites, which are developed from various plant-based fibers and animal-based fibers are considered potential substitutes for synthetic fiber composites because they are characterized by lightweight, better biodegradability, and are available at low cost. It is very much essential to study end-of-life (EoL) conditions like biodegradability for the biocomposites which occur commonly after their service life. During biodegradation, the physicochemical arrangement of the natural fibers, the environmental conditions, and the microbial populations, to which the natural fiber composites are exposed, play the most influential factors. The current review focuses on a comprehensive discussion of the standards and assessment methods of biodegradation in aerobic and anaerobic conditions on a laboratory scale. This review is expected to serve the materialists and technologists who work on the EoL behaviour of various materials, particularly in natural fiber-reinforced polymer composites to apply these standards and test methods to various classes of biocomposites for developing sustainable materials.

Sugarcane-bagasse-ash in enhanced mesophilic Co-digestion for biogas and nutrient recovery: A concept of developing rural circular bioeconomy

Conductive agro-industrial wastes as accelerants in the anaerobic digestion (AD) of organic waste is a good technique for developing a rural circular economy, such as producing bioenergy and biofertilizer. This study disclosed the a role of sugar cane bagasse ash (SCBA) in enhancing the bioenergy (biogas) yield and digestate fertility via anaerobic co-digestion (AcoD) of buffalo dung (BD) and vegetable residue (VR) under mesophilic conditions (37 ᴼC). Firstly, an optimal BD/VR ratio (1:3) was determined based on biogas yield by introducing five different BD/VR ratios (1:0, 3:1, 1:1, 1:3, and 0:1) into AcoD systems. Secondly, the biogas yield was increased further by adding SCBA at five different concentrations (0, 0.5, 1, 1.5, and 2 wt%). Experimental results disclosed that the 1.5 wt% of SCBA gave the highest cumulative biogas yield (153.67 mL/g VS), COD removal rate (31.18%), and fertility (5.08%). Moreover, a framework is suggested to understand the role of SCBA in the enhanced DIET mechanism. This work documents an environmentally friendly and economical technique for developing a rural circular bioeconomy via the AD of organic agro-waste.

Carbon disulfide removal from gasoline fraction using zinc-carbon composite synthesized using microwave-assisted homogenous precipitation

Carbon disulfide (CS2) is one of the sulfur components that are naturally present in petroleum fractions. Its presence causes corrosion issues in the fuel facilities and deactivates the catalysts in the petrochemical processes. It is a hazardous component that negatively impacts the environment and public health due to its toxicity. This study used zinc-carbon (ZC) composite as a CS2 adsorbent from the gasoline fraction model component. The carbon is derived from date stone biomass. The ZC composite was prepared via a homogenous precipitation process by urea hydrolysis. The physicochemical properties of the prepared adsorbent are characterized using different techniques. The results confirm the loading of zinc oxide/hydroxide carbonate and urea-derived species on the carbon surface. The results were compared by the parent samples, raw carbon, and zinc hydroxide prepared by conventional and homogeneous precipitation. The CS2 adsorption process was performed using a batch system at atmospheric pressure. The effects of adsorbent dosage and adsorption temperatures have been examined. The results indicate that ZC has the highest CS2 adsorption capacity (124.3 mg.g-1 at 30 °C) compared to the parent adsorbents and the previously reported data. The kinetics and thermodynamic calculation results indicate the spontaneity and feasibility of the CS2 adsorption process.

Dual utilization of aloe peel: Aloe peel-derived carbon quantum dots enhanced anaerobic co-digestion of aloe peel

Carbon materials have been widely used in anaerobic digestion (AD), but the role of zero-dimensional carbon quantum dots (CQDs) in anaerobic co-digestion (AcoD) has not yet been reported. In this work, the effect of aloe peel-derived CQDs (AP-CQDs) on the AcoD system of aloe peel and dairy manure was investigated. The addition of AP-CQDs accelerants increased the cumulative CH₄ yield from 201.14 to 266.92-339.64 mL/g VS and increased total chemical oxygen demand removal efficiency from 34.72 % to 48.77-57.87 %. The use of a digestate with 0.36 wt.% of AP-CQDs resulted in a thermogravimetric mass loss of 47.15 % and a promising total nutrient content of 46.65 g/kg. The excellent electron exchange capacity of AP-CQDs may facilitate direct interspecies electron transfer during the AD process. Moreover, the use of AP-CQDs can enrich methanogenic microorganisms (Methanosarcina and Methanobacterium). These findings provide a viable strategy for improving methane production and create awareness regarding the dual use of biomass waste.

Mineral residue accelerant-enhanced anaerobic digestion of cow manure: An evaluation system of comprehensive performance

Anaerobic digestion (AD) is an efficient technology for treating biowaste and generating biogas. A reasonable evaluation of AD performance is crucial to its development. Herein, a comprehensive evaluation system covering five dimensions (energy output, process stability, degradation efficiency, digestate fertility, and digestate safety) was established to assess AD performance. Each dimension in the evaluation system was assigned a specific indicator defined by a threshold or range. Additionally, the proposed evaluation system was applied to assess a case study of batch-mode mesophilic AD that employed three industrial waste residues as mineral accelerants (nickel‑iron slag, steel slag, and fly ash). The mineral accelerants enhanced the energy output (methane yield by 66.55 %-87.54 %) and the feedstock degradation (chemical oxygen demand removal ratio by 11.23 %-32.42 %). The digestates also retained promising safety (heavy metal contents of 190-1260 mg/kg) and fertility (total nutrient contents of 3.71 %-4.69 %). The evaluation system reasonably appraised the comprehensive performance of accelerant-enhanced AD systems with cow manure. This work provides a reliable methodology for evaluating and comparing the performance of different novel accelerants and can be applied to evaluate the comprehensive performance of large-scale biogas projects with cow manure.

Co-digestion of cow manure and food waste for biogas enhancement and nutrients revival in bio-circular economy

Anaerobic co-digestion (AcoD) with suitable substrate ratios may have the potential to improve biogas process and could play a better role in nutrient management for biocircular economy. The goal of this study was to enhance biogas yield from AcoD of cow manure (CM) and canteen food waste (CFW), and pertinent co-digestion of suitable substrate ratios for nutrient management i. e NPK from linear to biocircular economy, using ruminant intestinal fluid as a source of inoculum. A mesophilic (37 ± 1 °C) laboratory-scale AcoD with varying CFW/CM ratios of (0:1, 1:4, 2:3, 1:1, 3:2, 4:1, and 1:0) based on wet weight was performed. The AcoD systems of different CFW/CM ratios were evaluated with a loading rate of 400 g/L in the presence of 100 g cow intestinal fluid (CIF) inoculation. All experimental AcoD systems yielded greater biogas (147-300 cm3/g VS) than the mono-digestion in which only CM (135 cm3/g VS) and CFW (146 cm3/g VS) were digested anaerobically. The AcoD system of CFW/CM with 4:1 showed the highest biogas yield (300 cm3/g VS), and VS and COD reduction rate (39.51% and 65.15%, respectively), and nutrient contents (6.53%). Moreover, the experiment results were verified by modified Gompertz model. This work provided a window of opportunity to examine the anaerobic co-digestion technology beyond biogas production and to put the current low-cost technology to use for nutrient management and as a better component of the biocircular economy for agriculture in Pakistan in order to achieve sustainable development goals.

Enhanced methane production in anaerobic co-digestion systems with modified black phosphorus

Black phosphorus (BP) and BP modified by hydrogen peroxide (MBP) were used as accelerants to enhance CH₄ production and CO₂ reduction in microbial electrolysis cells (MECs) coupled with anaerobic co-digestion systems (MEC-AcoD). The MEC-AcoD group with a voltage of 0.6 V and 0.03 wt.% of MBP accelerant (MEC_0.6MBP_0.03) had the largest CH₄ yield (242.1 mL/g VS) and the smallest carbon dioxide yield (97.6 mL/g VS) compared with the control group (141.2 mL/g VS, 146.9 mL/g VS). The digestates that used MEC_0.6MBP_0.03 exhibited superior thermal stability (46.2 %) and total nutrient contents (44.5 g/kg). These improvements may be attributed to the superior electron exchange capacity and physicochemical properties of MBP. Herein, we propose a strategy to understand enhanced CH₄ production and CO₂ reduction in anaerobic co-digestion and MEC-AcoD systems using MBP accelerants. Notably, combining MBP and MEC could effectively promote anaerobic co-digestion performance.

Metagenomic analysis reveals the size effect of magnetite on anaerobic digestion of waste activated sludge after thermal hydrolysis pretreatment

Although magnetite has been widely investigated in anaerobic digestion (AD), its role in the practical AD of waste-activated sludge (WAS) after thermal hydrolysis pretreatment (THP) and its size effect remain unclear. In this study, magnetite with four different particle sizes was added during the AD of WAS after THP. With the reduction of magnetite particle size, cumulative methane production was increased, while the optimal dosage of magnetite decreased, with 0.1 μm magnetite at an optimal dosage of 2 g/L achieving the highest cumulative methane production increase of 111.97 % compared with the blank group (without magnetite). Smaller magnetite particles increased α-glucosidase and protease activities, coenzyme F₄₂₀ concentration, and electron-transport system activity (20.30 %, 173.02 %, 60.39 % and 158.08 % higher respectively than the blank group). The size of magnetite also influenced the establishment of direct interspecies electron transfer (DIET) during AD. Based on the analysis of the pilA gene abundance, magnetite with a large particle size could promote the formation of e-pili in syntrophic electroactive bacteria (Clostridium, Syntrophomonas, and Pseudomonas) and methanogens (Methanospirillum), thereby completing electron transfer. However, small-sized magnetite particles stimulated DIET by enhancing the secretion of conductive proteins in extracellular polymeric substances and membrane-bound enzymes (Fpo) in Methanosarcina.

Utilization of nanoparticles for biogas production focusing on process stability and effluent quality

Abstract

One of the most important techniques for converting complex organic waste into renewable energy in the form of biogas and effluent is anaerobic digestion. Several issues have been raised related to the effectiveness of the anaerobic digestion process in recent years. Hence nanoparticles (NPs) have been used widely in anaerobic digestion process for converting organic wastes into useful biogas and effluent in an effective way. This review addresses the knowledge gaps and summarizes recent researchers’ findings concentrating on the stability and effluent quality of the cattle manure anaerobic digestion process using single and combinations nanoparticle. In summary, the utilization of NPs have beneficial effects on CH4 production, process optimization, and effluent quality. Their function, as key nutrient providers, aid in the synthesis of key enzymes and co-enzymes, and thus stimulate anaerobic microorganism activities when present at an optimum concentration (e.g., Fe NPs 100 mg/L; Ni NPs 2 mg/L; Co NPs 1 mg/L). Furthermore, utilizing Fe NPs at concentrations higher than 100 mg/L is more effective at reducing H2S production than increasing CH4, whereas Ni NPs and Co NPs at concentrations greater than 2 mg/L and 1 mg/L, respectively, reduce CH4 production. Effluent with Fe and Ni NPs showed stronger fertilizer values more than Co NPs. Fe/Ni/Co NP combinations are more efficient in enhancing CH4 production than single NPs. Therefore, it is possible to utilize NPs combinations as additives to improve the effectiveness of anaerobic digestion.

Article highlights

Effects of various materials used to promote the direct interspecies electron transfer on anaerobic digestion of low-concentration swine manure

The activation of direct interspecies electron transfer (DIET) by the supplementation of conductive materials is one of the effective and available methods to enhance anaerobic digestion (AD). Microorganisms that colonize the surface of these materials form biofilms, the study of which could provide new insights into the character of the DIET process and its effect on AD. The present study focused on AD performance, microbial community, as well as morphological and topological features of biofilms on various materials used to promote DIET during AD of low-concentration swine manure. The best AD characteristics were observed in stainless steel mesh (SM)/digested cow manure (CM) and polyester felt (PF)/digested sewage sludge (SS) combinations used as material/inoculum, respectively. Thus, potential methane yields in CM-SM and SS-PF were up to 26.4% and 26.2% higher compared to the corresponding controls. Microbial analysis of biofilms revealed the dominance of putatively syntrophic bacteria of the MBA03 group of the Limnochordia class in CM inoculated reactors, and syntrophic proteolytic bacteria of the genus Coprothermobacter and acetogenic Clostridium sensu stricto 1, known for their ability to carry out DIET, in SS inoculated reactors. Biofilms on non-conductive materials contained pili-like structures, which were observed only in SS inoculated reactors. Polyester felt tended to biofoul better than carbon felt, resulting in up to 2.8, 3.2 and 1.8 higher nucleic acid, extracellular polymeric substances, and total biomass content, respectively, depending on the inoculum. These results provide new insights into the different types of DIET that can occur in low-loaded AD systems with attached growth.

Removal of hexavalent chromium via biochar-based adsorbents: State-of-the-art, challenges, and future perspectives

Chromium originates from geogenic and extensive anthropogenic activities and significantly impacts natural ecosystems and human health. Various methods have been applied to remove hexavalent chromium (Cr(VI)) from aquatic environmental matrices, including adsorption via different adsorbents, which is considered to be the most common and low-cost approach. Biochar materials have been recognized as renewable carbon sorbents, pyrolyzed from various biomass at different temperatures under limited/no oxygen conditions for heavy metals remediation. This review summarizes the sources, chemical speciation & toxicity of Cr(VI) ions, and raw and modified biochar applications for Cr(VI) remediation from various contaminated matrices. Mechanistic understanding of Cr(VI) adsorption using different biochar-based materials through batch and saturated column adsorption experiments is documented. Electrostatic interaction and ion exchange dominate the Cr(VI) adsorption onto the biochar materials in acidic pH media. Cr(VI) ions tend to break down as HCrO₄^-, CrO₄^2-, and Cr₂O₇^2- ions in aqueous solutions. At low pH (∼1-4), the availability of HCrO₄^- ions attributes the electrostatic forces of attraction due to the available functional groups such as -NH₄⁺, -COOH, and -OH₂⁺, which encourages higher adsorption of Cr(VI). Equilibrium isotherm, kinetic, and thermodynamic models help to understand Cr(VI)-biochar interactions and their adsorption mechanism. The adsorption studies of Cr(VI) are summarized through the fixed-bed saturated column experiments and Cr-contaminated real groundwater analysis using biochar-based sorbents for practical applicability. This review highlights the significant challenges in biochar-based material applications as green, renewable, and cost-effective adsorbents for the remediation of Cr(VI). Further recommendations and future scope for the implications of advanced novel biochar materials for Cr(VI) removal and other heavy metals are elegantly discussed.

Technological and Energetic Aspects of Multi-Component Co-Digestion of the Beverage Industry Wastes and Municipal Sewage Sludge

In the present study, the co-digestion effectiveness of the selected beverage wastes and municipal sewage sludge in two- and three-component mixtures was evaluated. Orange peels and orange pulp, as well as brewery spent grain were applied as co-substrates to sewage sludge at the following doses: 1.5 and 3.0 g of orange peels, 2.5 and 5 g of orange pulp, and 1.5 g brewery spent grain. Mono-digestion of sewage sludge was used as a control. The experiments were performed under mesophilic conditions in batch reactors. As compared to the control, only in the presence of the highest dose of pulp, brewery spent grain and sewage sludge was the increased methane production of 395 mL CH4 g−1 VS accompanying an additional energy profit of 82% observed. Moreover, in this case, the enhanced volatile solids removal and lower accumulation of p-cymene were found. These results were despite the increased limonene and phenol content in the feedstock, confirming a synergistic effect at the highest dose of pulp, brewery spent grain and sewage sludge.

Use of bag-filter gas dust in anaerobic digestion of cattle manure for boosting the methane yield and digestate utilization

Plenty of refractory and environmentally hazardous bag-filter gas dust (BGD) is produced in the iron-making process. The effects of untreated BGD on anaerobic digestion (AD) with cattle manure were investigated. The BGD had the potential to boost the methane yield and digestate utilization considerably. The digester with 2.0 wt% BGD gained the highest methane yield (256.3 mL/g VS) and chemical oxygen demand removal rate (56.8%), 51.3% and 20.1% higher than that (169.4 mL/g VS, 47.3%) of the control group, respectively. The digestates with BGD possessed a utilization potential with the stability of 49.5-57.9% and fertility of 4.65-4.86%. Electrochemical measurements demonstrated that 2.0 wt% BGD improved the electron transport capacity of the AD system and increased the limiting current and redox peak current by 40.3% and 12.9%, respectively. A strategy for understanding the BGD reinforcing methanogenesis was proposed. This work also provides a technical support for recycling the BGD.

Enhanced anaerobic co-digestion performance by using surface-annealed titanium spheres at different atmospheres

A series of surface-annealed titanium spheres (Ti-A, Ti-B, and Ti-C) in different atmospheres were used as accelerants in anaerobic co-digestion (AcoD) systems under magnetic field (MF). Surface-annealed titanium spheres and MF exhibit remarkable coupling and promoting effects on the AcoD performance. The cumulative biogas yield (435.84-552.60 mL/g VS) and total chemical oxygen demand (COD) degradation efficiency (59.76%-71.28%) of the AcoD systems with Ti_MF, Ti-A_MF, Ti-B_MF, and Ti-C_MF were significantly higher than control (357.66 mL/g VS and 51.5%). The digestates of the AcoD system with surface-annealed Ti spheres delivered excellent stability (49.83%-59.90%) and fertilizer (4.21%-4.56%). This work clarifies the possible role of surface-annealed Ti spheres in enhancing methanogenesis.

Impact of electro-conductive nanoparticles additives on anaerobic digestion performance - A review

Anaerobic digestion (AD) is a biochemical process that converts waste organic matter into energy-rich biogas with methane as the main component. Addition of electric electro-conductive, such as that nanoparticles (NP), has been shown to improve biogas generation. Interspecies electron transfer and direct interspecies electron transfer (DIET) using conductive materials is one of the mechanisms responsible for observed increases in CH₄. This article discusses the effect of the type and size of electro-conductive NPs on improving microbial degradation within AD systems, as well as the effect of electro-conductive NPs on microbial community shifts and syntrophic metabolism. Limitations and future perspectives of using NPs in an AD system is also discussed.

Performance and mechanism of conductive magnetite particle-enhanced excess sludge anaerobic digestion for biogas recovery

The aim of this study was to evaluate the effect of magnetite particles on the anaerobic digestion of excess sludge. The results showed that methane production increased with the increase in magnetite dosage in the range of 0–5 g L⁻¹, and the cumulative methane production increased by 50.1% at a magnetite dosage of 5 g L⁻¹ compared with the blank reactor after 20 days. Simultaneously, numerous volatile fatty acids (VFAs) were produced at high magnetite dosages, providing the required substrates for methanogenesis. The concentration of magnetite addition was positively correlated with methane production, which proved that magnetite was beneficial for the promotion of the conversion of VFAs to methane. Moreover, the degradation efficiencies of proteins and carbohydrates reached 64% and 52.6% at the magnetite dosage of 5 g L⁻¹, respectively, and corresponding activities of protease and coenzyme F420 were 9.03 IU L⁻¹ and 1.652 μmol L⁻¹. In addition, the Methanosaeta and Methanoregula genus were enriched by magnetite, which often participate in direct interspecies electron transfer as electron acceptors.

Magnetite particles were applied to excess sludge anaerobic digestion. The methane production and sludge reduction were related to magnetite particle dosage, and the Methanosaeta and Methanoregula involved in the electron transfer were enriched.

Magnetic biochar prepared by electromagnetic induction pyrolysis of cellulose: Biochar characterization, mechanism of magnetization and adsorption removal of chromium (VI) from aqueous solution

This work introduces a novel methodology for synthesis of magnetic biochar from cellulose using an electromagnetic induction technology. More rough surfaces, sharp corners and edges, and compact regular pore structure with Fe₃O₄ and Fe₂O₃ of magnetic biochar was obtained. Such magnetic biochar possessed higher specific surface area (~236 m²/g) and micropore volume (0.144 m³/g). More hydroxyl groups of magnetic biochars decomposed and reacted with iron ions to form new chemical bonds. The coercivity and remanence of two magnetic biochars were calculated to be 125.76 Oe and 1.26 emu/g, 71.48 Oe and 1.31 emu/g. The total iron leaching rate were 0.94% and 1.28%, indicating magnetic biochar form wet pyrolysis process showed strong magnetization and iron loading stability (98.59%). Alternating electromagnetic field influenced the iron loading capacity and stability by Lorentz force during wet pyrolysis process. Such magnetic biochar can be used for removal of Cr(VI) from wastewater.

Coconut-shell-derived bio-based carbon enhanced microbial electrolysis cells for upgrading anaerobic co-digestion of cow manure and aloe peel waste

Microbial electrolysis cells (MECs) and exogenous accelerants can augment anaerobic digestion performance. Herein, MECs and coconut-shell-derived bio-based carbon (CBC) accelerant are adopted to strengthen anaerobic co-digestion of cow manure and aloe peel waste. The MEC with the voltage of 0.6 V and CBC accelerant of 0.15 wt.% gained the highest cumulative biogas yield (444.20 NmL/g VS) and chemical oxygen demand removal rate (75.46%), which are 80.25% and 58.33% higher than those (246.44 NmL/g VS, 47.66%) of the blank group, respectively. The digestates embodied a utilization potential with thermogravimetric loss of 37.12%-50.67% and total nutrient content of 35.36-51.58 g/kg. These results benefited from excellent electrocatalytic activity of MECs and physicochemical properties of CBC accelerant. A general strategy for understanding improved methanogenesis was proposed based on integrated effects of MECs and CBC accelerant. This work will shed light on development of anaerobic co-digestion by combining MECs and bio-based carbon accelerants.

Implanted metal-nitrogen active sites enhance the electrocatalytic activity of zeolitic imidazolate zinc framework-derived porous carbon for the hydrogen evolution reaction in acidic and alkaline media

Developing electrocatalysts with excellent catalytic performance and superior durability for hydrogen evolution reaction (HER) remains a challenge. Herein, metal-nitrogen sites (M-N_x, M = Ni and Cu) are successfully implanted into zeolitic imidazolate zinc framework (ZIF-8)-derived nitrogen-doped porous carbon (ZIF/NC) to prepare Ni-ZIF/NC and Cu-ZIF/NC electrocatalysts for the HER. These M-N_x active sites significantly enhanced the electrocatalytic activities of Ni-ZIF/NC and Cu-ZIF/NC. Metal Ni acted as a catalyst for catalysis of Ni-ZIF/NC to form carbon nanotubes-like structures, which provided convenient ion transmission pathways. Owing to its special morphology and an increased number of defects, Ni-ZIF/NC displayed superior electrocatalytic activity in the HER compared to those of Cu-ZIF/NC and ZIF/NC. In an alkaline environment, Ni-ZIF/NC exhibited an overpotential at the current density of 10 mA cm^-2 (η₁₀) of 163.0 mV and Tafel slope of 85.0 mV dec^-1, demonstrating an electrocatalytic property equivalent to that of Pt/C. In an acidic environment, Ni-ZIF/NC yielded a η₁₀ of 177.4 mV and Tafel slope of 83.9 mV dec^-1, which were comparable to those of 20 wt.% Pt/C. Moreover, Ni-ZIF/NC and Cu-ZIF/NC also exhibited superior stabilities in alkaline environments. This work offers a valuable strategy for controlling the morphology and implanting M-N_x active sites into carbon for designing novel catalysts for use in alternative new energy applications.

Static-magnetic-field coupled with fly-ash accelerant: A powerful strategy to significantly enhance the mesophilic anaerobic-co-digestion

The anaerobic-co-digestion (AcoD) of dairy-manure (DM) and aloe-peel-residue (ALR) waste is enhanced by combining static-magnetic-field (SMF) and fly-ash (FA). Varying SMF intensities (5-30 mT) were applied to the co-digestion digesters containing the optimum FA concentration (1.5 wt.%), which were selected from co-digestion systems with a varying FA (0-2 wt.%). All experimental groups exhibit the greater COD removal rates (51.56-64.19%) and cumulative biogas yields (604.14-671.64 mL/g VS) than reference group (37.77% and 433.19 mL/g VS). The digester with optimum FA concentration (1.5 wt.%) under 5 mT shows the highest biogas yield (671.64 mL/g VS), and exhibits superior digestate stability (45.4%) and fertility (7.01%) for fertilizer utilization. A powerful strategy for understanding the underlying mechanism of the SMF and FA accelerant in an enhanced AcoD system is proposed. This work documents an innovative technique for an enhanced AcoD system using the SMF coupled with FA accelerant.

Binary and ternary trace elements to enhance anaerobic digestion of cattle manure: Focusing on kinetic models for biogas production and digestate utilization

The effects of binary and ternary trace elements (TEs) (Fe/Co, Fe/Ni, and Fe/Co/Ni) on the anaerobic digestion (AD) of cattle manure were investigated using kinetic models (first-order, logistic, modified Gompertz, and Coats-Redfern) and experimental measurements. Binary and ternary TEs can significantly improve the biogas production rate and yield potential. The deviation between the predicted and measured data for biogas yield with logistic model (2.1%-5.3%) and modified Gompertz model (0.32%-2.9%) was smaller than that with first-order kinetic model (6.9%-9.9%). The Coats-Redfern model fitting indicated that the activation energy of digestates with trace elements during pyrolysis was reduced by 3.9%-26.2% compared with the control group. Meanwhile, digestates with TEs showed remarkable fertility (5.72%-5.95%). The combination of kinetic models and experimental measurements can effectively quantify the effect of TEs on AD performance and provide an informed choice for industrial production.

Strategies to boost anaerobic digestion performance of cow manure: Laboratory achievements and their full-scale application potential

Cow manure represents a surplus manure waste in agricultural food sectors, which requires proper disposal. Anaerobic digestion, in this regard, has raised global interest owing to its apparent environmental benefits, including simultaneous waste diminishment and renewable energy generation. However, dedicated intensifications are necessary to promote the degradation of recalcitrant lignocellulosic components of cow manure. Hence, this manuscript presents a review of how to exploit cow manure in anaerobic digestion through different incentives extensively at lab-scale and full-scale. These strategies comprise 1) co-digestion; 2) pretreatment; 3) introduction of additives (trace metals, carbon-based materials, low-cost composites, nanomaterials, and microbial cultures); 4) innovative systems (bio-electrochemical fields and laser irradiation). Results imply that co-digestion and pretreatment approaches gain the predominance on promoting the digestion performance of cow manure. Particularly, for the co-digestion scenario, the selection of lignin-poor co-substrate is highlighted to produce maximum synergy and pronounced removal of lignocellulosic compounds of cow manure. Mechanical, thermal, and biological (composting) pretreatments generate mild improvement at laboratory-scale and are proved applicable in full-scale facilities. It is noteworthy that the introduction of additives (Fe-based nanomaterials, carbon-based materials, and composites) is acquiring more attention and shows promising full-scale application potential. Finally, bio-electrochemical fields stand out in laboratory trials and may serve as future reactor modules in agricultural anaerobic digestion installations treating cow manure.

Blast-furnace slag cement and metakaolin based geopolymer as construction materials for liquid anaerobic digestion structures: Interactions and biodeterioration mechanisms

In order to promote the development of the biogas industry, solutions are needed to improve concrete structures durability in this environment. This multiphysics study aims to analyse the multiphases interactions between the liquid phase of an anaerobic digestion system and cementitious matrices, focusing on (i) the impacts of the binder nature on the anaerobic digestion process at local scale, and (ii) the deterioration mechanisms of the materials. Cementitious pastes made of slag cement (CEM III), innovative metakaolin-based alkali-activated material (MKAA), with compositions presumed to resist chemically aggressive media, and a reference binder, ordinary Portland cement (CEM I), were tested by immersion in inoculated cattle manure in bioreactors for a long period of five digestion cycles. For the first time it was shown that the digestion process was disturbed in the short term by the presence of the materials that increased the pH of the liquid phase and slowed the acids consumption, with much more impact of the MKAA. However, the final total production of biogas was similar in all bioreactors. Material analyses showed that, in this moderately aggressive medium, the biodeterioration of the CEM I and CEM III pastes mainly led to cement matrix leaching (decalcification) and carbonation. MKAA showed a good behaviour with very low degraded depths. In addition, the material was found to have interesting ammonium adsorption properties in the chemical conditions (notably the pH range) of anaerobic digestion.

Augmented biohydrogen production from rice mill wastewater through nano-metal oxides assisted dark fermentation

This study highlights biohydrogen production enrichment through NiO and CoO nanoparticles (NPs) inclusion to dark fermentation of rice mill wastewater using Clostridium beijerinckii DSM 791. NiO (~26 nm) and CoO (~50 nm) NPs were intrinsically prepared via facile hydrothermal method with polyhedral morphology and high purity. Dosage dependency studies revealed the maximum biohydrogen production characteristics for 1.5 mg/L concentration of both NPs. Biohydrogen yield was improved by 2.09 and 1.9 folds higher for optimum dosage of NiO and CoO respectively, compared to control run without NPs. Co-metabolites analysis confirmed the biohydrogen production through acetate and butyrate pathways. Maximum COD reduction efficiencies of 77.6% and 69.5% were observed for NiO and CoO inclusions respectively, which were higher than control run (57.5%). Gompertz kinetic model fitted well with experimental data of NPs assisted fermentation. Thus, NiO and CoO inclusions to wastewater fermentation seems to be a promising technique for augmented biohydrogen production.

Enhanced direct interspecies electron transfer with transition metal oxide accelerants in anaerobic digestion

Transition metal compounds have been widely used to enhance the anaerobic digestion (AD) performance, while the role of transition metal compounds in enhancing AD performance remains unclarified. In this work, the function of transition metal oxide accelerants (tantalum oxide, niobium oxide, hafnium oxide, and tungsten oxide) in enhanced AD systems was investigated from experimental and theoretical standpoints. Higher biogas production (565.01-617.85 mL/g VS), chemical oxygen demand degradation rate (67.17%-70.45%), total solids and volatile solids reduction rates (29.76%-34.71%, 51.83%-60.88%) were achieved in AD systems with transition metal oxide accelerants than the control (327.08 mL/g VS, 56.65%, 22.65%, and 41.18%). The first-principle density functional theory calculations, electron exchange capacity analysis, and the 16S rRNA gene pyrosequencing demonstrated superior electron transfer and exchange capacities as well as microbial consortia development in transition metal oxides-induced DIET mechanism. This work provides a promising strategy for understanding the function of high-performance accelerants in AD systems.

Critical evidence for direct interspecies electron transfer with tungsten-based accelerants: An experimental and theoretical investigation

Accelerants can significantly enhance the biodegradability in anaerobic digestion (AD), which can be attributed to the direct interspecies electron transfer (DIET) mechanism. However, critical evidence for DIET mechanism is absent. In this work, nano-scale tungsten (W)-based compounds (WC, W₂N, and W₁₈O₄₉) are employed to clarify the roles of W-based accelerants in AD systems. A DIET mechanism based on the W-based accelerants is proposed, and three critical pieces of evidence are provided: (i) First-principle density functional theory calculations provide theoretical evidence, illustrating that W-based accelerants are of zero band gap. (ii) Electrical conductivity evaluation further elucidates that W-based accelerants have superior electronic transport. (iii) Pyrosequencing of 16S rRNA gene confirms the existence of acetogens and methanogens in AD systems, which can act as electron-donor bacteria and electron-acceptor archaea, respectively. Combining theoretical with experimental results, the critical evidence provides a general strategy for understanding the DIET mechanism of accelerant in AD systems.