Enhanced adsorption of tetracycline by an iron and manganese oxides loaded biochar: Kinetics, mechanism and column adsorption

Polydopamine coating for enhanced electrostatic adsorption of methylene blue by multiwalled carbon nanotubes in alkaline environments

The removal of dye molecules in alkaline environments is an issue that should receive increased attention. In this study, the interaction mechanism between polydopamine-modified multiwalled carbon nanotubes (P-MWCNTs) and multiwalled carbon nanotubes (MWCNTs) with the cationic dye methylene blue (MB) in alkaline environments was explained in depth by adsorption, spectroscopy, and density functional theory (DFT). The mechanism of action and dominant forces between the adsorbent and adsorbate were analyzed graphically by introducing energy decomposition analysis (EDA) and an independent gradient model (IGM) into the DFT calculations. In addition, the force distribution was investigated through an isosurface. Moreover, batch adsorption studies were conducted to evaluate the performance of MWCNTs and P-MWCNTs for MB removal in alkaline environments. The maximum MB adsorption capacities of the MWCNTs and P-MWCNTs in solution were 113.3 mg‧g-1 and 230.4 mg‧g-1, respectively, at pH 9. The IGM and EDA showed that the better adsorption capacity of the P-MWCNTs originated from the enhancement of the electrostatic effect by the proton dissociation of polydopamine. Moreover, the adsorption of MB by MWCNTs and P-MWCNTs in alkaline environments was governed by dispersion and electrostatic effects, respectively. Through this study, it is hoped that progress will be made in the use of DFT to explore the mechanism of adsorbent-adsorbate interactions.

Efficiency and ecotoxicity of activated biochar in the treatment of artificial wastewater contaminated by pharmaceuticals

Pharmaceuticals are emerging contaminants of global concern due to potential ecotoxicity and persistence in wastewater. Since conventional wastewater treatment plants are not designed to remove micropollutants and the removal efficiency varies compound-specifically, pharmaceuticals pose a risk in the recipient aquatic environments. Adsorption by solid materials such as activated biochar has been suggested to offer a practical removal method. However, not much is known about the environmental risks of the adsorbents used in wastewater treatment. This study aimed to study the efficiency of activated biochar (ACB) to remove low and high concentration of specific pharmaceuticals including diclofenac (DI), tetracycline (TE), and cephalexin (CEP) from Milli-Q water (MQ) and artificial wastewater (AWW). Furthermore, the study evaluated the ecotoxicity of these pharmaceuticals, as well as pristine ACB and ACB loaded with pharmaceuticals (ACB-LP), in both MQ and AWW using Daphnia magna. The adsorbate concentration and matrix affected ACB's removal efficiency. Weaker adsorbent-adsorbate interactions and mass transfer resistance at lower adsorbate concentrations, along with interactions between wastewater constituents and pharmaceuticals were the leading factors contributing to this reduction. These experimental observations indicate practical considerations for using adsorbents in operational wastewater settings. Furthermore, ACB-LPs generally exhibited lower toxicity compared to ACB, attributed to the saturation of free binding sites and reduced adhesion to daphnids. This study highlights the importance of examining the environmental risks of adsorbent materials used in wastewater treatment, particularly given their anticipated future use.

Performances of a novel BAF with ferromanganese oxide modified biochar (FMBC) as the carriers for treating antibiotics, nitrogen and phosphorus in aquaculture wastewater

In this paper, a biological aerated filter (BAF) based on ferromanganese oxide-biochar (FMBC) was constructed to investigated the removal performance and mechanism for conventional pollutants and four kinds of antibiotic, in contrast of conventional zeolite loaded BAF (BAF-A) and bamboo biochar filled BAF (BAF-B). Results showed that the average removal efficiency of total nitrogen (TN), total phosphorus (TP) and antibiotics in a FMBC-BAF (named by BAF-C) were 52.97 ± 2.27%, 51.58 ± 1.92% and 70.36 ± 1.00% ~ 81.65 ± 0.99% respectively in running period (39-100 d), which were significantly higher than those of BAF-A and BAF-B. In the BAF-C, the expression of denitrification enzyme activities and the secretion of extracellular polymeric substance (EPS) especially polyprotein (PN) were effectively stimulated, as well as accelerated electron transfer activity (ETSA) and lower electrochemical impedance spectroscopy (EIS) were acquired. After 100 days of operation, the abundance of nitrogen, phosphorus and antibiotic removal functional bacteria like Sphingorhabdus (4.52%), Bradyrhizobium (1.98%), Hyphomicrobium (2.49%), Ferruginibacter (7.80%), unclassified_f_Blastoca tellaceae (1.84%), norank_f_JG30-KF-CM45 (6.82%), norank_f_norank_o_SBR1031 (2.43%), Nitrospira (2.58%) norank_f_Caldilineaceae (1.53%) and Micropruina (1.11%) were enriched. Mechanism hypothesis of enhanced performances of nutrients and antibiotics removal pointed that: The phosphorus was removed by adsorption and precipitation, antibiotics removal was mainly achieved through the combined action of adsorption and biodegradation, while nitrogen removal was realized by biologic nitrification and denitrification in a FMBC-BAF for aquaculture wastewater treatment.

Highly enhanced chloramphenicol adsorption performance of MIL-53-NH2(Al)-derived porous carbons modified with tannic acid

The worldwide demand for antibiotics has experienced a notable surge, propelled by the repercussions of the COVID-19 pandemic and advancements in the global healthcare sector. A prominent challenge confronting humanity is the unregulated release of antibiotic-laden wastewater into the environment, posing significant threats to public health. The adoption of affordable carbon-based adsorbents emerges as a promising strategy for mitigating the contamination of antibiotic wastewater. Here, we report the synthesis of novel porous carbons (MPC) through a direct pyrolysis of MIL-53-NH2(Al) and tannic acid (TANA) under N2 atmosphere at 800 °C for 4 h. The effect of TANA amount ratios (0%-20%, wt wt-1) on porous carbon structure and adsorption performance was investigated. Results showed that TANA modification resulted in decreased surface area (1,600 m2 g-1-949 m2 g-1) and pore volume (2.3 cm3 g-1-1.7 cm3 g-1), but supplied hydroxyl functional groups. Adsorption kinetic, intraparticle diffusion, and isotherm were examined, indicating the best fit of Elovich and Langmuir models. 10%-TANA-MPC obtained an ultrahigh adsorption capacity of 564.4 mg g-1, which was approximately 2.1 times higher than that of unmodified porous carbon. 10%-TANA-MPC could be easily recycled up to 5 times, and after reuse, this adsorbent still remained highly stable in morphology and surface area. The contribution of H bonding, pore-filling, electrostatic and π-π interactions to chloramphenicol adsorption was clarified. It is recommended that TANA-modified MIL-53-NH2(Al)-derived porous carbons act as a potential adsorbent for removal of pollutants effectively.

Synthesis of surficial-modified green biochar catalyst generated by biogas residue biochar and potential application for catalytic ozonation degradation of ciprofloxacin

This study synthesized novel, green, and easily recoverable surface-modified economical catalysts via hydrothermal treatment (HT) successfully, utilizing biogas residue biochar (BRB), a food waste product from anaerobic fermentation, pyrolyzed at 500 °C for 50 min. Using autoclaves, a total of six solutions were prepared, each having 1 g fine-grinded BRB, surficial modified by adding glycerol (GL) (10 or 20 mL) and SDI water (70 or 60 mL), and heated in an oven at 240 °C, 180 °C, and 120 °C for 24 h. Afterward, the catalysts showed the potential for degradation of widely used emerging pollutants like ciprofloxacin. Taking advantage of catalytic surface modification, the catalytic ozonation degradation was more effective than that of a single ozonation. However, under similar conditions, catalyst amount 0.20 g, ozone dose 15 mg L-1, and ciprofloxacin 80 mg L-1, the performance of the 10 mL GL-180 °C catalyst was excellent. It showed a 92.45%-94.41% optimum removal rate in the 8-10 min interval. After five continuous cycles, the 10 mL GL-180 °C catalyst exhibited excellent stability and reusability. XPS, FT-IR, BET, XRD, and SEM before and after the reaction confirmed the successful synthesis and degradation mechanism. A possible degradation pathway was unrevealed based on a liquid chromatography-mass spectrometer (LC-MS) and scavenger test, proving the significant roles of superoxide radicals (O2•-), hydroxyl radicals (•OH), and singlet oxygen (1O2). Further, Electron paramagnetic resonance (EPR) analysis confirmed the presence of active oxygen species. Subsequently, 10 mL GL-180 °C showed promising degradation for the actual water environment, such as groundwater (73.55%) and river water (64.74%). This work provides a valuable economic strategy to convert biogas residue biochar into a low-cost catalyst for organic pollutant decomposition.

Preparation and application of KCC-1@ZIF-8 for the solid extraction of tetracycline with high adsorption capacity

In this study, three different materials were prepared: dendritic fiber-type silica (KCC-1), zeolitic imidazolate framework-8 (ZIF-8), and a new composite material called KCC-1@ZIF-8. These materials were synthesized using microemulsion, stirring, and coating methods, respectively. The properties of the materials were characterized using various techniques such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), TGA and X-ray diffraction (XRD). The results showed that KCC-1@ZIF-8 exhibited a significant increase in the BET surface area and pore size compared to the individual components KCC-1 and ZIF-8. These improved properties of the composite material were beneficial for enhancing the adsorption capacity. The effects of initial concentrations, solution pH and reaction time on the adsorption capacity were investigated. The adsorption kinetics and isothermal data of ZIF-8 and KCC-1@ZIF-8 fitted well with pseudo-second-order and Langmuir isotherm models. The results of adsorption thermodynamics show that the adsorption process is spontaneous and endothermic. KCC-1@ZIF-8 exhibited a very high adsorption capacity (751.46 mg g-1) at an initial TC hydrochloride concentration of 80 mg L-1 in an aqueous solution at 301.15 K, and the value was higher than that of ZIF-8 (549.80 mg g-1) under the same conditions. KCC-1 exhibited a relatively lower capacity (37.860 mg g-1). Based on these findings, KCC-1@ZIF-8 was considered a promising adsorbent for the treatment of wastewater contaminated with TC hydrochloride. Additionally, the composite material, when combined with high-performance liquid chromatography (HPLC), could be used as a solid-phase extraction adsorbent for the adsorption of TC hydrochloride in animal foodstuff samples. The calibration curves showed a linear range of 20-500 μg L-1, and the recovery rate ranged from 85.216% to 90.717%. No one has made adsorbents with this new structure before, and KCC-1@ZIF-8 possessed excellent adsorption properties, which make it a potential candidate for environmental remediation and analytical applications involving TC hydrochloride.

Enhancing neonicotinoid removal in recirculating constructed wetlands: The impact of Fe/Mn biochar and microbial interactions

Neonicotinoids pose significant environmental risks due to their widespread use, persistence, and challenges in elimination. This study explores the effectiveness of Fe/Mn biochar in enhancing the removal efficiency of neonicotinoids in recirculating constructed wetlands (RCWs). Results demonstrated that incorporating Fe/Mn biochar into RCWs significantly improved the removal of COD, NH4+-N, TN, TP, imidacloprid (IMI), and acetamiprid (ACE). However, the simultaneous presence of IMI and ACE in the RCWs hindered the elimination of NH4+-N, TN, and TP from wastewater. The enhanced removal of nutrients and pollutants by Fe/Mn biochar was attributed to its promotion of carbon, nitrogen, and phosphorus cycling in RCWs, along with its facilitation of the adsorption and biodegradation of IMI and ACE. Metagenomics analysis demonstrated that Fe/Mn biochar altered the structure and diversity of microbial communities in RCWs. A total of 17 biodegradation genes (BDGs) and two pesticide degradation genes (PDGs) were identified within RCWs, with Fe/Mn biochar significantly increasing the abundance of BDGs such as cytochrome P450. The potential host genera for these BDGs/PDGs were identified as Betaproteobacteria, Acidobacteria, Nitrospiraceae, Gemmatimonadetes, and Bacillus. This study offers valuable insights into how Fe/Mn biochar enhances pesticide removal and its potential application in constructed wetland systems for treating pesticide-contaminated wastewater.

Enhanced performance and mechanism of adsorption pretreatment for alleviating membrane fouling in AGMBR: Impact of structural variations in carbon adsorbents

The structural variances of adsorbents play a crucial role in determining the number of effective adsorption sites and pretreatment performance. However, there is still a gap in comprehending the impact of different carbon structural adsorbents on membrane fouling. Therefore, this study aimed to compare the efficacy of granular activated carbon (GAC), powdered activated carbon (PAC), and activated carbon fiber (ACF) in mitigating membrane fouling during municipal sewage reclamation using an aerobic granular sludge membrane bioreactor (AGMBR). The results demonstrated that the utilization of PAC significantly enhanced the normalized flux and reduced fouling resistance in comparison to GAC and ACF systems. PAC effectively adsorbed low and medium-molecular-weight pollutants present in raw sewage, resulting in an increase in average particle size and a decrease in foulant content on the membrane surface. The Hermia model indicated that adsorption pretreatment minimized standard blocking while promoting the formation of a sparse and porous cake layer. Moreover, according to the extended Derjaguin-Landau-Verwey-Overbeek theory, PAC has been demonstrated as the optimal antifouling system owing to its enhanced repulsion between membrane-foulant and foulant-foulant interactions. Correlation analysis revealed that the exceptional antifouling performance of the PAC system was due to its high removal rates of chemical oxygen demand (~78 %) and suspended solids (~97 %). This research offers valuable insights into the mitigation of membrane fouling through the utilization of adsorbents featuring diverse carbon structures.

Adsorption/desorption of enrofloxacin in farmland soil as the effect of pH and coexisting ions: implications for enrofloxacin fate and risk in loess soil

Fluoroquinolone antibiotics have been extensively used in clinical treatments for human and animal diseases. However, their long-term presence in the environment increases the risk of producing resistance genes and creates a potential threat to ecosystems and the health of humans and animals. Batch equilibrium experiments were utilized to investigate the adsorption and retention behavior and mechanism of the quinolone antibiotic enrofloxacin (ENR) in farmland soil in North China. The adsorption and desorption kinetics of ENR in soil were best fitted by pseudo-second-order model (R2 > 0.999). Both the adsorption and desorption processes of ENR in soil reached equilibrium in 1 h. The desorption amounts of ENR were significantly lower than the adsorption amounts, with the hysteresis coefficient (HI) being less than 0.7. The adsorption thermodynamic process of ENR followed the Linear and Freundlich models (0.965 < R2 < 0.985). Hydrophobic distribution and heterogeneous multimolecular layer adsorption were identified as critical factors in the adsorption process. The adsorption amount of ENR gradually decreased with increasing temperature and the initial concentration of ENR. The adsorption rate of ENR was above 80%, while the desorption rate remained below 15%, indicating strong retention ability. The adsorption rate of ENR in soil decreased with increasing pH, the adsorption rate reached 98.3% at pH 3.0 but only 31.5% at pH 11. The influence of coexisting ions on adsorption primarily depended on their properties, such as ion radius, ionic strength, and hydrolysis properties, and the inhibition of adsorption increased with increasing ionic strength. These findings contribute to understanding the fate and risk of veterinary antibiotics in loess soil in North China.

A sustainable carbon aerogel from waste paper with exceptional performance for antibiotics removal from water

In this work, a sustainable 3D carbon aerogel (AO-WPC) is prepared from waste paper (WP), and used for efficient antibiotics removal from water. The AO-WPC aerogel shows good mechanical property and can recover after 100th of 30 % compression strain. The specific surface area of AO-WPC aerogel is up to 654.58 m2/g. More importantly, this aerogel reveals proper pore size distribution, including micro sized macropores between carbon fibers and intrinsic nano scale mesopores (11.86 nm), which is conducive to remove antibiotics from water. Taking tetracycline (Tc) as an example, the maximum adsorption capacity and adsorption rate of AO-WPC for Tc are as high as 384.6 mg/g and 0.510 g/(mg‧min), respectively, which exhibits significant advantages over most of the recent absorbents, and the adsorption toward Tc reveals good resistance to various environmental factors, including pH, various ions, and dissolved organic matter (DOM). Moreover, good thermal stability enables the AO-WPC aerogel to be regenerated through simple burning, and the adsorption capacity of Tc only decreases by 10.4 % after 10 cycles. Mechanism research shows that hydrogen bonding and π-π electron-donor-acceptor (EDA) interaction play the important role in the adsorption. The excellent mechanical property and adsorption performance imply good practical prospect of the AO-WPC aerogel.

An eco-friendly porous hydrogel adsorbent based on dextran/phosphate/amino for efficient removal of Be(II) from aqueous solution

A novel environmentally-friendly porous hydrogel adsorbent (GHPN) is firstly designed and prepared using dextran, phosphate, and calcium hydroxide for the adsorption of Be(II). GHPN shows good adsorption selectivity for Be(II) (Kd = 1.53 × 104 mL/g). According the adsorption kinetics and thermodynamics, the theoretical adsorption capacity of GHPN to Be(II) is 43.75 mg/g (35 °C, pH = 6.5), indicating a spontaneous exothermic reaction. After being reused for 5 cycles, the adsorption and desorption efficiencies of Be(II) with GHPN are obtained to be more than 80 %, showing acceptable recycling performance. Both of the characterizations and theoretical calculations indicate that the phosphate group, hydroxyl group, and amino group own the affinity to form stable complexes with Be(II). Benefiting from the introduction of phosphate and amino, the adsorption effect of the hydrogel adsorbent on Be(II) can be greatly improved, and surface precipitation, complexation, and ligand exchange are the dominant mechanisms of beryllium adsorption. The results suggest that GHPN has great potential to be utilized as an eco-friendly and useful adsorbent of Be(II) from aqueous solution.

Preparation of Activated Biocarbons from Cones and their Potential Application for Adsorption of Antibiotics (Tetracycline)

The pine cones (PC), spruce cones (SC) and fir cones (FC) were used for biocarbons preparation. Chemical activation with sodium hydroxide was applied to prepare activated biocarbons. All the materials under investigation were characterized by the N2 adsorption, scanning electron microscopy (SEM), elemental analysis (CHNS), infrared spectroscopy (ATR FT-IR), and the Boehm's titration method. Moreover, pHpzc (the point of zero charge) was determined. It was shown that cones are a good, cheap precursor from which biocarbons with a developed porous structure, characterized by good adsorption properties, can be obtained. All the obtained adsorbents are characterized mainly by a microporous structure. Moreover, they contain both acidic and basic surface functional groups (acidic ones prevail over basic ones). The tested activated biocarbons have large specific surface area values ranging from 578 to 1182 m2 g-1. The efficacy of selected materials in the adsorption of an essential contaminant of increasing concern, tetracycline (TC), was investigated. The experimental data were described using the Langmuir and Freundlich adsorption isotherm models. The maximum adsorption capacity of the tested biocarbons ranges from 200 to 392 mg g-1. Thermodynamic studies proved that adsorption is a spontaneous and endothermic process. In summary, economical and environmentally friendly adsorbents were obtained.

Multifunctional self-assembled adsorption microspheres based on waste bamboo shoot shells for multi-pollutant water purification

In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.

Preparation of highly adsorptive biochar by sequential iron impregnation under refluxing and pyrolysis at low temperature for removal of tetracycline

Iron-doping modification is a prevailing approach for improving adsorption capability of biochar with environmental friendliness, but usually requires high temperature and suffers from iron aggregation. Herein, a highly adsorptive biochar was manufactured via sequential disperse impregnation of iron by refluxing and pyrolysis at low temperature for eliminating tetracycline (TC) from aqueous solution. Iron oxides and hydroxides were impregnated and stably dispersed on the carbon matrix as pyrolyzed at 200 °C, meanwhile abundant oxygen and nitrogen functional groups were generated on surface. The iron-doped biochar exhibited up to 891.37 mg/g adsorption capacity at pH 5, and could be recycled with high adsorption capability. The adsorption of TC should be mostly contributed to the hydrogen bonding of N/O functional groups and the hydrogen bonding/coordination of iron oxides/hydroxides. This would provide a valuable guide for dispersedly doping iron and conserving functional groups on biochar, and a super iron-doped biochar was prepared with superior recyclability.

Excess sludge-based biochar loaded with manganese enhances catalytic ozonation efficiency for landfill leachate treatment

This study developed an efficient and stable landfill leachate treatment process, which was based on the combination of biochar catalytic ozonation and activated sludge technology for intensive treatment of landfill leachate, aiming to achieve the standard discharge of leachate. The focus is to investigate the effect of manganese loading on the physicochemical properties of biochar and the mechanism of its catalytic ozonation. It was found that more surface functional groups (CO, Mn-O, etc.) and defects (ID/IG = 1.27) were exposed via the change of original carbon structure by loading Mn, which is conducive to the generation of lattice oxygen. Meanwhile, generating different valence states of Mn metal can improve the redox properties and electron migration rate, and encourage the production of reactive oxygen species (ROS) during the reaction process and enhance the catalytic efficiency. The synergistic action of microorganisms, especially denitrifying bacteria, was found to play a key role in the degradation of nitrogenous pollutants during the activated sludge process. The concentration of NH+4-N was reduced from the initial 1087.03 ± 9.56 mg/L to 9.05 ± 1.91 mg/L, while COD was reduced from 2290 ± 14.14 mg/L to 86.5 ± 2.12 mg/L, with corresponding removal rates of 99.17% and 99.20%, respectively. This method offers high efficiency and stability, achieving discharge standards for leachate (GB16889-2008). The synergy between Mn-loaded biochar and microorganisms in the activated sludge is key to effective treatment. This study offers a new approach to solving the challenge of waste leachate treatment.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of β-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Adsorption behavior of lead, cadmium, and arsenic on manganese-modified biochar: competition and promotion

Biochar adsorption of heavy metals has been a research hotspot, yet there has been limited reports on the effect of heavy metal interactions on adsorption efficiency in complex systems. In this study, the adsorbent was prepared by pyrolysis of rice straw loaded with manganese (BC-Mn). The interactions of Pb, Cd and As adsorption on BC-Mn were systematically studied. The results of the adsorption isotherms for the binary metal system revealed a competitive adsorption between Pb and Cd, resulting in decreased Pb (from 214.38 mg/g to 148.20 mg/g) and Cd (from 165.73 mg/g to 92.11 mg/g). A notable promotion occurred between As and Cd, showing an increase from 234.93 mg/g to 305.00 mg/g for As and 165.73 mg/g to 313.94 mg/g for Cd. In the ternary metal system, Pb inhibition did not counteract the promotion of Cd and As. Furthermore, the Langmuir isotherm effectively described BC-Mn's adsorption process in monometallic, binary, and ternary metal systems (R2 > 0.9294). Zeta and FTIR analyses revealed simultaneous competition between Pb and Cd for adsorption on BC-Mn's -OH sites. XPS analysis revealed that As adsorption by BC-Mn facilitated the conversion of MnO2 and MnO to MnOOH, resulting in increased hydroxyl radical production on BC-Mn's surface. Simultaneously, Cd combined with the adsorbed As to form ternary Cd-As-Mn complexes, which expedited the removal of Cd. These results help to provide theoretical support as well as technical support for the treatment of Pb-Cd-As contaminated wastewater.

One-step synthesis of iron and nitrogen co-doped porous biochar for efficient removal of tetracycline from water: Adsorption performance and fixed-bed column

Here, Fe/N co-doped porous biochars (FeNKBCs) were obtained by grinding corncob, CH3COOK, FeCl3·6H2O, and C3H6N6 via one-step synthesis and were applied to remove antibiotics from wastewater. Notably, CH3COOK had an excellent porous activation ability. The developed nanotubular structure of Fe1N2KBC had a high pore volume (Vtotal) (1.2131 cm3/g) and specific surface areas (SSA) (2083.54 m2/g), which showed outstanding sorption abilities for TC (764.35 mg/g), OTC (560.82 mg/g), SMX (291.45 mg/g), and SMT (354.65 mg/g). The adsorption process of TC was controlled by chemisorption. Moreover, Fe1N2KBC has an excellent dynamic adsorption performance (620.14 mg/g) in a fixed-bed column. The properties of SSA, Vtotal, and the content of graphite N and Fe-N were positively correlated with TC adsorption capacity. The high performance of TC removal was related to π-π stacking, pore-filling, hydrogen bond, and electrostatic interaction. Fe1N2KBC possessed stable sorption amounts in pH 2-12 and actual water, and well reuse performance. The results of this work present an effective preparation method of Fe/N porous biochar for TC-contaminated water remediation.

Bimetal doped Cu-Fe-ZIF-8/g-C3N4 nanocomposites for the adsorption of tetracycline hydrochloride from water

Bimetal doped Cu-Fe-zeolitic imidazole framework-8 (ZIF-8)/graphitic carbon nitride (GCN) (Cu-Fe-ZIF-8/GCN) nanocomposites were prepared via one-pot and ion-exchange methods. The main influencing factors, such as adsorbent concentration, TC concentration, initial pH, and coexisting ions, were evaluated in detail. Due to the suitable pore structures and the presence of multiple interactions on the surface, the nanocomposite showed a high adsorption capacity up to 932 mg g-1 for tetracycline hydrochloride (TC), outperforming ZIF-8 by 4.8 times. The adsorption kinetics and adsorption isotherm were depicted in good detail using pseudo-second-order kinetic and Langmuir models, respectively. Thermodynamic calculation revealed that the adsorption of the nanocomposite under experimental conditions was a spontaneous heat absorption process, and was primarily driven by chemisorption. After four cycles of use, the nanocomposite retained 87.2% of its initial adsorption capacity, confirming its high reusability and broad application prospects in removing tetracycline-type pollutants from wastewater.

Porous metal-organic framework-acrylamide-chitosan composite aerogels: Preparation, characterization and adsorption mechanism of azo anionic dyes adsorbed from water

Micro- and nano-metal-organic frameworks with different adsorption properties were prepared by a time-modulation hydrothermal method. By comparing the adsorption properties, the most effective MIL-68(Fe)-12 was selected to be mixed with chitosan (CS), and porous metal-organic framework-acrylamide-chitosan composite aerogel (PMACA) was prepared by introducing acrylamide prior to glutaraldehyde crosslinking. The adsorption capacity of PMACA doped with acrylamide was as high as 2086.44 mg·g-1. The adsorption performance of PMACA was 1.48 times higher compared to the porous metal-organic framework-chitosan composite aerogel (PMCA) undoped with acrylamide. With the introduction of acrylamide, the stability of PMACA was improved, making it less prone to dispersion and decomposition. Structural characterization and adsorption properties were analyzed using methods such as XRD, FTIR, TGA, SEM, BET, and Zeta potential. The adsorption performance of PMACA was investigated further through batch tests with variables such as adsorbent dosage, pH, contact time, initial CR solution concentration, and temperature. The model fitting of PMACA was consistent with the pseudo-second-order model and the Sips model. The adsorption thermodynamics showed that high temperature promoted spontaneous adsorption behavior. PMACA showed a recovery rate of approximately 86 % after six cyclic adsorption tests. PMACA maintained a recovery rate of roughly 86 % after six cyclic adsorption tests. The combined effects of electrostatic attraction, hydrogen bonding, and π-π conjugation resulted in excellent adsorption performance, while pore filling also contributed to the efficient adsorption of Congo red (CR).

Fabrication of Iron-Containing Biochar by One-Step Ball Milling for Cr(VI) and Tetracycline Removal from Wastewater

Simple ball milling technology can simultaneously improve the adsorption performance of adsorbents for heavy metals and organic pollutants and has attracted increasing attention. Iron-modified biochar (Fe@MBC) was prepared by one-step ball milling, and the characterization results proved that FeCl3 was successfully loaded on biochar. The removal rates of Cr(VI) and tetracycline hydrochloride (TC) by Fe@MBC were increased by 88.27% and 82.64% compared with BC. The average pore size, oxygen-containing functional groups and graphitization degree of Fe@MBC are higher than those of BC, which is more conducive to promoting adsorption. The adsorption isotherms show that the adsorption of Cr(VI) and TC on the Fe@MBC surface conforms to the Langmuir type of single-layer adsorption and the Freundlich model of multilayer adsorption, respectively. The maximum adsorption capacities of Cr(VI) and TC are 25.46 and 66.91 mg·g-1, respectively. Kinetic experiments show that the adsorption process is more consistent with the pseudo-second-order model of chemical adsorption. The adsorption process of Cr(VI) and TC on the Fe@MBC surface is a spontaneous endothermic process that becomes more obvious as the temperature increases. The increase in solution pH has a significant impact on the removal rate of Fe@MBC. When the pH value increased from 3 to 11, the adsorption rates decreased by 53.74% and 17.16%, respectively. The presence of PO43-, CO32-, K+, and Cu2+ significantly affects the adsorption of TC by Fe@MBC, and PO43- and CO32- also affect the adsorption of Cr(VI). Mechanistic studies show that ion exchange, electrostatic interaction, pore filling, and hydrogen bonding contribute to the removal of Cr(VI) and TC by Fe@MBC. The removal mechanism of Cr(VI) also involves complexation and redox reactions, and the removal mechanism of TC involves π-π bonds and van der Waals forces. The results show that Fe@MBC is a green and efficient adsorbent.

Recent insights into mechanism of modified bio-adsorbents for the remediation of environmental pollutants

Rapid industrialization has exacerbated the hazard to health and the environment. Wide spectrums of contaminants pose numerous risks, necessitating their disposal and treatment. There is a need for further remediation methods since pollutant residues cannot be entirely eradicated by traditional treatment techniques. Bio-adsorbents are gaining popularity due to their eco-friendly approach, broad applicability, and improved functional and surface characteristics. Adsorbents that have been modified have improved qualities that aid in their adsorptive nature. Adsorption, ion exchange, chelation, surface precipitation, microbial uptake, physical entrapment, biodegradation, redox reactions, and electrostatic interactions are some of the processes that participate in the removal mechanism of biosorbents. These processes can vary depending on the particular biosorbent and the type of pollutants being targeted. The systematic review focuses on the many modification approaches used to remove environmental contaminants. Different modification or activation strategies can be used depending on the type of bio-adsorbent and pollutant to be remediated. Physical activation procedures such as ultrasonication and pyrolysis are more commonly used to modify bio-adsorbents. Ultrasonication process improves the adsorption efficiency by 15-25%. Acid and alkali modified procedures are the most effective chemical activation strategies for adsorbent modification for pollution removal. Chemical modification increases the removal to around 95-99%. The biological technique involving microbial culture is an emerging field that needs to be investigated further for pollutant removal. A short evaluation of modified adsorbents with multi-pollutant adsorption capability that have been better eliminated throughout the adsorption process has been provided.

Investigating the efficiency of oak powder as a new natural coagulant for eliminating polystyrene microplastics from aqueous solutions

Polystyrene (PS) is a commonly used plastic material in disposable containers. However, it readily breaks down into microplastic particles when exposed to water environments. In this research, oak powder was used as a natural, inexpensive, and eco-friendly coagulant. The present study aims to determine the effectiveness of oak powder in removing PS from aquatic environments. The Box-Behnken model (BBD) was used to determine the optimal conditions for removal. The removal efficiency was evaluated for various parameters including PS concentration (100-900 mg/L), pH (4-10), contact time (10-40 min), and oak dosage (100-400 mg/L). The maximum removal of PS microplastics (89.1%) was achieved by using an oak dose of 250 mg/L, a PS concentration of 900 mg/L, a contact time of 40 min, and a pH of 7. These results suggest that oak powder can effectively remove PS microplastics through surface adsorption and charge neutralization mechanisms, likely due to the presence of tannin compounds. Based on the results obtained, it has been found that the natural coagulant derived from oak has the potential to effectively compete with harmful chemical coagulants in removing microplastics from aqueous solutions.

Oxidative magnetization of biochar at relatively low pyrolysis temperature for efficient removal of different types of pollutants

A novel oxidative magnetization, involving phosphomolybdic acid and Fe(NO3)3 co-promoted pyrolysis, was established to manufacture highly adsorptive magnetic biochars for adsorbing aqueous tetracycline, methylene blue, and Cr6+. The modification of phosphomolybdic acid greatly boosted the formation of γ-Fe2O3 and oxygen containing groups with enhancement of specific surface area and pore volume at 400 °C. Importantly, γ-Fe2O3 was stably fixed on surface in quasi-nanoscale. The oxidized magnetic biochar displayed 631.53, 158.45, 155.13 mg/g adsorption capabilities for tetracycline, methylene blue, and Cr6+ with 22.79 emu/g saturation magnetization, respectively. Oxygen containing groups and quasi-nanoscale γ-Fe2O3 served as key adsorption sites for these pollutants. A general oxidative magnetization was established for manufacturing high-performance magnetic biochar through phosphomolybdic acid/Fe(NO3)3 co-promoted pyrolysis at relatively low temperature.

Multistage utilization of soybean straw-derived P-doped biochar for aquatic pollutant removal and biofuel usage

Biochar is of great importance to realizing solid biowastes reduction and environmental remediation. Modifying biochar for better performance is also of great concern to achieve property improvement. P-doped biochar from soybean straw is prepared for multistage utilization to realize water pollutant removal and biofuel usage. The results suggest that the prepared biochar is adequate for sulfadiazine adsorption and has stable performance under coexisting ions and aquatic pH. Furthermore, the higher heating value of the biochar is close to coal and thus can be an alternative to fossil fuel. The maximum sulfadiazine adsorption amount of P-doped biochar is 252.24 mg·g-1, and the P-doped biochar HHV is 24 MJ·kg-1 which can be an alternative to coal. The greenhouse gas and pollutant emission potential are also considered to explore the environmental impact of P-doped biochar production and usage. Overall, the optimal ratio of soybean straw: K3PO4 is 3:1.

KOH-modified bamboo charcoal loaded with α-FeOOH for efficient adsorption of copper and fluoride ions from aqueous solution

In this work, bamboo charcoal (BC) is prepared by pyrolysis of bamboo. Then, KOH modification and surface deposition of Goethite (α-FeOOH) are performed to obtain a new KOH-modified BC loaded with α-FeOOH (FKBC) adsorbent for copper (Cu2+) and fluoride (F-) ion adsorption from aqueous solution. Surface morphology and physiochemical properties of the prepared adsorbent are characterized by scanning electron microscopy-energy dispersive spectrometer, X-ray diffraction, and N2 adsorption-desorption. The effect of pH, contact time, adsorbent dosage, and initial concentration on Cu2+ and F- adsorption is also investigated. In addition, adsorption kinetics and isotherms are fitted to pseudo-second-order kinetics and Langmuir model, respectively. Thermodynamic parameters suggest that the adsorption process is spontaneous and endothermic. The adsorption mechanism is further characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The Cu2+ absorption mainly occurs through ion exchange, coordination reactions, and surface precipitation, while the F- adsorption mainly occurs via ion exchange and hydrogen bonding. The selective adsorption experiments reveal that FKBC has good selectivity for Cu2+ and F-. The adsorption-desorption experimental results indicate that FKBC can be reused for Cu2+ and F- adsorption after regeneration. Results indicate that FKBC can be a promising adsorbent for Cu2+ and F- removal from aqueous solutions.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

Recent advances in luminescence and aptamer sensors based analytical determination, adsorptive removal, degradation of the tetracycline antibiotics, an overview and outlook

Tetracycline antibiotics (TCs), one of the important antibiotic groups, have been widely used in human and veterinary medicines. Their residues in foodstuff, soil and sewage have caused serious threats to food safety, ecological environment and human health. Here, we reviewed the potential harms of TCs residues to foodstuff, environment and human beings, discussed the luminescence and aptamer sensors based analytical determination, adsorptive removal, and degradation strategies of TCs residues from a recent 5-year period. The advantages and intrinsic limitations of these strategies have been compared and discussed, the potential challenges and opportunities in TCs residues degradation have also been deliberated and explored.

Removal Performance and Mechanism of Emerging Pollutant Chloroquine Phosphate from Water by Iron and Magnesium Co-Modified Rape Straw Biochar

Chloroquine phosphate (CQP) is effective in treating coronavirus disease 2019 (COVID-19); thus, its usage is rapidly increasing, which may pose a potential hazard to the environment and living organisms. However, there are limited findings on the removal of CQP in water. Herein, iron and magnesium co-modified rape straw biochar (Fe/Mg-RSB) was prepared to remove CQP from the aqueous solution. The results showed that Fe and Mg co-modification enhanced the adsorption efficiency of rape straw biochar (RSB) for CQP with the maximum adsorption capacity of 42.93 mg/g (at 308 K), which was about two times higher than that of RSB. The adsorption kinetics and isotherms analysis, as well as the physicochemical characterization analysis, demonstrated that the adsorption of CQP onto Fe/Mg-RSB was caused by the synergistic effect of pore filling, π-π interaction, hydrogen bonding, surface complexation, and electrostatic interaction. In addition, although solution pH and ionic strength affected the adsorption performance of CQP, Fe/Mg-RSB still had a high adsorption capability for CQP. Column adsorption experiments revealed that the Yoon-Nelson model better described the dynamic adsorption behavior of Fe/Mg-RSB. Furthermore, Fe/Mg-RSB had the potential for repeated use. Therefore, Fe and Mg co-modified biochar could be used for the remediation of CQP from contaminated water.

Natural phenol-inspired porous polymers for efficient removal of tetracycline: Experimental and engineering analysis

Efficient and feasible removal of trace antibiotics from wastewater is extremely important due to its environmental persistence, bioaccumulation, and toxicity, but still remains a huge challenge. Herein, three natural phenol-inspired porous organic polymers were fabricated from natural phenolic-derived monomers (p-hydroxy benzaldehyde, 2,4-dihydroxy benzaldehyde and 2,4,6-trihydroxy benzaldehyde) and melamine via polycondensation reaction. Characterization highlighted that the increasing contents of hydroxyl groups in monomers induced an increase of the polymer total porosity and promoted the formation of a highly microporous structure. With mesopore-dominated pore (average pore diameter 9.6 nm) and large pore volume (1.78 cm³/g), p-hydroxy benzaldehyde-based porous polymer (1-HBPP) exhibited ultra-high maximum adsorption capacity (q_max) of 697.6 mg/g for tetracycline (TC) antibiotic. Meanwhile, the porous networks and plentiful active sites of 1-HBPP enabled fast adsorption kinetics (within 10 min) for TC removal, which could be well described by the pseudo-second-order model. Dynamic adsorption studies showed that 1-HBPP could be used in fixed-bed adsorption column (FBAC) with high removal efficiency (breakthrough volume per unit mass, 13.2 L/g) and dynamic adsorption capacity (201.6 mg/g), which were much higher than other reported adsorbents. The breakthrough curves both well matched with Thomas and Yoon-Nelson models in FBAC treatment. Moreover, removal mechanism analysis affirmed that pore-filling, hydrogen bonding, electrostatic interactions and π-π stacking interactions were main driving forces for TC adsorption. The prepared natural phenol-inspired porous adsorbents show great potential in antibiotics removal from wastewater, and this strategy would promote the sustainable and high-value utilization of natural phenolic compounds.

Modification of Chlorella vulgaris carbon with Fe3O4 nanoparticles for tetracycline elimination from aqueous media

Tetracycline (TTC) is an antibiotic commonly prescribed to treat bacterial infections in animals and humans because of its low toxicity and antibacterial activity. This study focuses on the removal of TTC from an aqueous media using an activated carbon of Chlorella vulgaris modified with Fe₃O₄ magnetic composite (ACCV/Fe₃O₄ mc). The isothermal and kinetic models were studied to understand the adsorption mechanism. The Box-Behnken model was used for experimental design, and the main research parameters were ACCV/Fe₃O₄ mc mass (0.2-0.8 g/L), reaction time (10-60 min), TTC concentration (5-30 mg/L), and pH (3-11). The highest TTC removal rate of 90.47% was obtained at a pH of 7, a time of 60 min, an ACCV/Fe₃O₄ mc mass of 0.5 g/L, and an antibiotic concentration of 5 mg/L. TTC removal was fitted with the pseudo-second-order and the Langmuir model. The Langmuir adsorption capacity of TTC was computed to be 26.18 mg/g. The results show that the ACCV/Fe₃O₄ mc adsorbent significantly removes TTC from the aqueous solution.

Tracing the synergistic migration of biochar and heavy metals based on 13C isotope signature technique: Effect of ionic strength and flow rate

Understanding the transport of biochar and heavy metals is important for evaluation of the long-term stability and ecotoxicity of heavy metals after biochar remediation. In this study, ¹³C-labelled biochar was prepared to investigate the synergistic down migration of biochar and heavy metals in the soil profile, and the effect of ionic strength (IS) and flow rate was examined. Results showed that the ¹³C-labelled biochar with high δ¹³C (249.3 ‰) was suitable for tracing the migration of biochar without influencing its adsorption for heavy metals (i.e., Cu²⁺ and Cd²⁺). Both higher IS and flow rate were favorable for the release of biochar, but higher IS inhibited the transport of biochar in soil profile, which was attributed to the enhanced primary- and secondary-minimum deposition based on the Derjaguin-Landau-Verwey-Overbeek (DLVO) analysis. The transport of Cu²⁺ and Cd²⁺ was facilitated by high IS and flow rate. The release of Cd from biochar was mainly affected by IS, due to ion exchange and a weaker electrostatic attraction to biochar at higher IS, while that of Cu was mainly affected by flow rate related to co-migration of metal with biochar. Metal-biochar particle was the dominant form to migrate in upper soil layer, whereas, soluble Cd²⁺ and Cu²⁺ desorbed from biochar were the dominant forms that migrated to the deeper soil. The synergistic down migration of biochar and heavy metals might pose less risks than the sole migration of soluble metals. That is, high IS might cause higher risks than high flow rate even though biochar and metals might transport further with high flow rate. These findings will advance the current knowledge on the migration risk involved in the in-situ remediation of heavy metal-contaminated soils by biochar.

The efficient adsorption of tetracycline from aqueous solutions onto polymers with different N-vinylpyrrolidone contents: equilibrium, kinetic and dynamic adsorption

Extensive use of antibiotics in the world will cause potential risks to human health and ecosystems. The removal of these antibiotics has attracted much attention. Composite materials are growing attention for diverse pollutants separation and removal based on their specific functionality and surface area. In this study, a series of N-vinylpyrrolidone-divinylbenzene polymers (NVPD) with different N-vinylpyrrolidone (NVP) contents were facilely prepared for the adsorption of tetracycline (TC). The effect of polymer surface properties and aqueous solution chemistry (pH, ionic strength, humic acid) on TC adsorption was further studied. The dynamic adsorption and regeneration experiments were also assessed. The results showed that only 25% of NVP was involved in the reaction. When NVP dosage (%) was 75%, polymer (NVPD-g) owned the largest BET surface area (613.23 m2/g) and obtained the maximum TC adsorption capacities (258.76 mg/g). In the kinetic, the adsorption between TC and polymers with NVP was controlled by chemical adsorption and intra-particle diffusion. The TC adsorption process of NVPD-g depended on the contribution of the hydrophobic effect, electrostatic interactions, H-bonding, π-π electron donor-acceptor (EDA) interactions, and cation-π bonding. Moreover, the removal efficiency of TC by NVPD-g was enhanced in the presence of humic acid (HA) in the dynamic adsorption and 1197 BV (2394 mL) of TC simulated wastewater can be treated. These findings suggest that NVPD-g has a potential application in the purification of TC.

Adsorptive removal of beryllium by Fe-modified activated carbon prepared from lotus leaf

Lotus leaf was used as raw material to prepare HNO₃-activated carbon with 1.5:1 (HNO₃:lotus leaf) (wt:wt) impregnation. Then, the activated carbon was modified by Fe(NO₃)₃ to obtain Fe-activated carbon (Fe-AC). The adsorption test results show that Fe-AC maximum saturated adsorption capacity (Q_m) is 45.68 mg/g when the Fe(NO₃)₃ loading is 5% of the total activated carbon, pH = 6, and the temperature is 35 ℃. The adsorption effect of Fe-AC under neutral conditions is better than that under alkaline and acidic conditions. The modified activated carbon has better adsorption selectivity. The obtained material (Fe-AC) was characterized by N₂ adsorption-desorption isotherm, SEM, FT-IR, BET, XRD, XPS, and pH_pzc. The total pore volume, specific surface area, and zero charges of modified activated carbon were increased. The types of modified functional groups were reduced, and the iron reacted with the functional groups, providing ion exchange sites for the adsorption of beryllium. The adsorption thermodynamics showed that the adsorption process was spontaneous and endothermic. The adsorption mechanism of Fe-AC to beryllium is mainly chemical adsorption.

Fabrication and application of chitosan-based biomass composites with fire safety, water treatment and antibacterial properties

In this work, a biomass composite material (CS@NC@PA-Na) was prepared from chitosan (CS), nano-cellulose (NC) and sodium phytate (PA-Na). The prepared products were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectrometry (XPS) and X-ray diffraction (XRD). The fire/water safety and antimicrobial properties of the CS@NC@PA-Na were fully studied. The results indicated CS@NC@PA-Na (50 mg) could effectively reduce the concentration of methyl orange by 85 % under 30 min adsorption. Meanwhile, only 5 wt% CS@NC@PA-Na could increase the limiting oxygen index (LOI) value of epoxy resin composite from 24.5 to 30.1 %, and decrease the peak heat/smoke release rate by 29.5 and 33.3 %, respectively. Moreover, CS@NC@PA-Na also exhibited excellent antibacterial effect. This work provides an efficient, feasible and eco-friendly route for large-scale production of multi-functional CS-based biomass materials that could be used in the fields of fire safety and environmental conservation.

Insight into atrazine removal by fallen leaf biochar prepared at different pyrolysis temperatures: Batch experiments, column adsorption and DFT calculations

The environmental pollution caused by atrazine in the agricultural production cannot be ignored. In this study, the fallen leaf biochar (LBC) was prepared at three different temperatures (500 °C, 600 °C, and 700 °C) using a simple pyrolysis method (500 LBC, 600 LBC, and 700 LBC) for atrazine adsorption. Batch experiments showed that the performance of LBC in atrazine adsorption improved with rising pyrolysis temperature, and the highest adsorption amount of 700 LBC reached 84.32 mg g^-1. Kinetic and isotherm models showed that the adsorption behaviors were both monolayer and multilayer chemisorption. The findings of the characterizations (Elemental analysis, BET, XRD, Raman, FT-IR, and XPS) confirmed that the degree of aromatization determined the adsorption capacity of LBC to atrazine, and π-π electron donor-acceptor interaction was the main adsorption mechanism. Density functional theory (DFT) calculations showed that the highly aromatized biochar was more effective for atrazine adsorption, manifested as smaller molecular distances, higher adsorption energies, more stable complex structures, and stronger π-electron conjugation. In the column adsorption experiments, reducing the inlet flow rate or increasing the bed height extended the breakthrough time and exhaustion time of the breakthrough curves, and 700 LBC still showed good adsorption performance after five cycles. Overall, fallen leaf biochar as a reuse product of resource showed good potential for application in atrazine adsorption, which can be used for atrazine-contaminated water remediation.

Enhanced adsorption capacity of tetracycline on porous graphitic biochar with an ultra-large surface area†

Excessive tetracycline in the water environment may lead to the harming of human and ecosystem health. Removing tetracycline antibiotics from aqueous solution is currently a most urgent issue. Porous graphitic biochar with an ultra-large surface area was successfully prepared by a one-step method. The effects of activation temperature, activation time, and activator dosage on the structural changes of biochar were investigated by scanning electron microscopy, Brunauer–Emmett–Teller, X-ray powder diffraction, and Raman spectroscopy. The effect of the structure change, adsorption time, temperature, initial pH, and co-existing ions on the tetracycline removal efficiency was also investigated. The results show that temperature had the most potent effect on the specific surface area, pore structure, and extent of graphitization. The ultra-large surface area and pore structure of biochar are critical to the removal of tetracycline. The q_e of porous graphitic biochar could reach 1122.2 mg g⁻¹ at room temperature. The calculations of density functional theory indicate that π–π stacking interaction and p–π stacking interaction can enhance the tetracycline adsorption on the ultra-large surface area of graphitic biochar.

1. A ultra-large surface area of porous graphitic biochar was successfully using corn starch and ZnCl₂ by a one-step method. 2. The adsorption capacity of tetracycline on the biochar could get 1122.2 mg g⁻¹ at room temperature.

Scallop shell coated Fe2O3 nanocomposite as an eco-friendly adsorbent for tetracycline removal

ABSTRACTThe present study focused on the usability of scallop shell coated Fe₂O₃ nanoparticles as an eco-friendly new absorbent in the treatment of tetracycline (TC). The process performance in terms of TC removal was investigated at different operating conditions, i.e. at solution pH of 3-11, Fe₂O₃-scallop dosage of 0.4-2.4 g L^-1, initial TC content of 20-120 mg L^-1 and temperature of 25-55°C. Solution pH of 7 yielded the highest TC removal efficiency (99%). At this pH value, almost complete TC removal was achieved at a Fe₂O₃-scallop shell nanocomposite dose of 1.6 g L^-1 and 25°C. The responsible TC removal mechanism is suggested as the non-electrical π-π dispersion interaction between the bulk π system on the absorbent surface and TC molecules bearing both benzene rings and double bonds at this solution pH. TC removal efficiency appreciably enhanced up to the Fe₂O₃-scallop dosage of 1.6 g L^-1 being an optimum. Adsorption rate was found to be fast at lower initial TC concentrations than 40 mg L^-1. The effect of temperature on TC removal efficiency was insignificant. Adsorption followed the pseudo-second-order kinetic model. Experimental data perfectly fitted by the Langmuir equation. The maximum adsorption capacity was calculated as 49.26 mg g^-1. Thermodynamic analysis demonstrated that adsorption process was spontaneous process and endothermic. The results obtained from the present study proved the excellent performance of scallop shell coated Fe₂O₃ nanoparticles as an eco-friendly adsorbent in TC treatment.

Ball milling-assisted preparation of sludge biochar as a novel periodate activator for nonradical degradation of sulfamethoxazole: Insight into the mechanism of enhanced electron transfer

The non-radical pathway of periodate (PI) activation for the removal of persistent organic contaminants has received increasing attention due to its higher stability and oxidative advantages. In this study, the degradation of sulfamethoxazole (SMX) by ball mill treated magnetic sludge biochar (BM-MSBC) through activation of PI by electron transfer mechanism was reported. Experimental and characterization results showed that the ball milling treatment resulted in a better pore and defect structure, which also significantly enhanced the electron transfer capacity of the sludge biochar. The BM-MSBC/PI system exhibited notable dependence of activator concentration and initial pH, while the effect of PI concentration was not significant. The coexisting substances (common anions and natural organic matters) hardly affect the degradation of SMX in the BM-MSBC/PI system. The phytotoxicity experiments suggested that the treatment of BM-MSBC/PI system could significantly reduce the biological toxicity of SMX solution. This study provides a novel, economical, and facile modification method for the application of sludge biochar in advanced oxidation processes.

Insight into the Fe-Ni/biochar composite supported three-dimensional electro-Fenton removal of electronic industry wastewater

For the efficient removal of the bio-refractory organic pollutants in the electronic industry wastewater, the Ni-Fe (oxides) modified three-dimension (3D) particle electrode was applied in electro-Fenton system (3D/EF), where iron ions were released from anode and deposited onto algal biochar (ABC) to prepare composite catalyst during reaction process. Firstly, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analysis were applied to confirm successful fabrication of the 3D particle electrode materials. Secondly, COD removal efficiency could reach about 80%, which was about 20% higher than that in 2D/EF system, under the optimized conditions as 2.0 g/L of Ni-ABC particle electrodes, initial pH of 3, 100 mL/min of aeration intensity and 20 mA/cm² of applied current density. Thirdly, characterized using three-dimensional fluorescence spectroscopy and GC-MS analysis, it seemed that most of the macromolecular substances could be degraded, whereas mono-2-ethylhexyl phthalate (MEHP) was identified as the most abundant and representative compound. Finally, possible degradation pathway of MEHP in 3D/EF system was proposed including dealkylation, cleavage of C-O bond, and demethylation. Therefore, this study provides a new strategy in designing EF system employing bimetal doped biochar composite for an efficient elimination of organic pollutants within electronic industry wastewater.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Z-scheme CuO/Fe3O4/GO heterojunction photocatalyst: Enhanced photocatalytic performance for elimination of tetracycline

CuO/Fe₃O₄/GO, as a Z-scheme heterojunction catalyst, was successfully synthesized and used as a photocatalyst for removing tetracycline from aqueous solution. The CuO/Fe₃O₄/GO heterogeneous catalyst combines the narrow bandgap semiconductor CuO, oxygen vacancies of Fe₃O₄, and oxygen-containing reaction sites of GO. Without the addition of activators (persulfate or H₂O₂), the photocatalytic performance on decomposing tetracycline is very excellent. Compared with GO, Fe₃O₄, and CuO, CuO/Fe₃O₄/GO exhibits superior photocatalytic performance. Under visible light radiation, CuO/Fe₃O₄/GO generates h⁺ and ⋅O₂^-, which are the mainly responsible active groups for TC degradation. The effects of various pH, catalysts, and reuse on the degradation performance are evaluated, and the optimal conditions for CuO/Fe₃O₄/GO removal of tetracycline are obtained at pH 7, catalyst dosage 20 mg⋅L^-1, TC at a concentration of 30 mg/L, nearly 97.3% of tetracycline is decomposed. This study has great potential in the treatment of wastewater containing various antibiotics.

A stable Fe/Co bimetallic modified biochar for ofloxacin removal from water: adsorption behavior and mechanisms

In this study, Fe-Co-modified biochar (FMBC) loaded with iron (Fe) and cobalt (Co) bimetals after NaOH activation was prepared by pyrolysis using forestry waste cedar bark as a raw material to study its properties and the adsorption of ofloxacin (OFX). The surface structure and chemical properties were analyzed by BET, SEM-EDS, XRD, XPS, and FTIR characterization, and the results showed that the FMBC possessed a larger specific surface area and abundant surface functional groups. FMBC conformed to pseudo-second-order kinetic and Langmuir isotherm models, indicating that the OFX adsorption process on FMBC was a monolayer adsorption process and controlled by chemisorption. The saturation adsorption capacity of FMBC was 10 times higher than that of cedar bark biochar (BC). In addition, the effects of initial pH and coexisting ions on the adsorption process were investigated, and FMBC showed good adsorption, with the best adsorption capacity at pH = 7. Multiple adsorption mechanisms, including physical and chemical interactions, were involved in the adsorption of OFX by FMBC. TG, metal leaching, different water sources, and VSM tests showed that FMBC had good stability and was easily separated from water. Finally, the reusability performance of FMBC was investigated by various methods, and after five cycles it could still reach 75.78-89.31% of the adsorption capacity before recycling. Therefore, the FMBC synthesized in this study is a promising new adsorbent.

One-Step Carbonization Synthesis of Magnetic Biochar with 3D Network Structure and Its Application in Organic Pollutant Control

In this study, a magnetic biochar with a unique 3D network structure was synthesized by using a simple and controllable method. In brief, the microbial filamentous fungus Trichoderma reesei was used as a template, and Fe3+ was added to the culture process, which resulted in uniform recombination through the bio-assembly property of fungal hyphae. Finally, magnetic biochar (BMFH/Fe3O4) was synthesized by controlling different heating conditions in a high temperature process. The adsorption and Fenton-like catalytic performance of BMFH/Fe3O4 were investigated by using the synthetic dye malachite green (MG) and the antibiotic tetracycline hydrochloride (TH) as organic pollutant models. The results showed that the adsorption capacity of BMFH/Fe3O4 for MG and TH was 158.2 and 171.26 mg/g, respectively, which was higher than that of most biochar adsorbents, and the Fenton-like catalytic degradation effect of organic pollutants was also better than that of most catalysts. This study provides a magnetic biochar with excellent performance, but more importantly, the method used can be effective in further improving the performance of biochar for better control of organic pollutants.

Enhanced removal of Cd2+ from water by AHP-pretreated biochar: Adsorption performance and mechanism

The sesame straw-derived biochar was successfully prepared via alkaline hydrogen peroxide (AHP) pretreatment in this study. Systematic experimental characterizations, 15 relevant batch and column adsorption models, combined with density functional theory (DFT) calculation were used to investigate the performances and micro-mechanisms of Cd²⁺ adsorption onto biochar. We found AHP-pretreatment could greatly improve the adsorption performance of biochar for Cd²⁺. The maximum Cd²⁺ adsorption capacity of AHP-pretreated biochar (87.13 mg g^-1) was much larger than that of unpretreated biochar. Cd²⁺ adsorption was mainly dominated by the chemisorption of the homogeneous surface monolayer. The hydroxyl and carboxyl groups on the surface of biochar provided preferential adsorption sites, and liquid film diffusion and intra-particle diffusion were two dominant rate-controlling steps. Our results showed that ion exchange, co-precipitation, surface complexation, and Cd²⁺-π interaction were the dominant adsorption mechanisms. Especially, DFT calculations well-identified that lone-pair electrons during complexation and π electrons during coordination were provided by oxygen-containing functional groups and aromatic rings, respectively. The experimental breakthrough curves fitted better with the theoretical value of the BJP model, compared to Thomas, Yoon-Nelson, and EXY models. Overall, our study provides a promising method for Cd²⁺ removal from wastewater and resource utilization of agricultural wastes.

Pristine and manganese ferrite modified biochars for copper ion adsorption: Type-wide comparison

This study synthesized nine biochars from different feedstocks and chemically modified their surfaces using MnFe₂O₄ precipitation at pH 11 (MnFe₂O₄-biochars). The maximum adsorption quantities (q_max) of Cu(II) at pH 6 and 25 °C for pristine biochars based on Langmuir model ranged 10.4-23.6 mg/g and for MnFe₂O₄-biochars, 32.7-43.1 mg/g, with enhancement from 65.6% (bamboo biochar) to 246% (white popinac biochar). Type-wide comparison shows no correlation between surface area of pristine or MnFe₂O₄-biochars on the adsorption performance. Conversely, the carboxyl groups on the nine biochar surfaces have contributed to Cu(II) adsorption. The type-dependence for q_max of different MnFe₂O₄-biochars becomes insignificant, confirming the role of biochars being principally an oxide carrier instead of an adsorbent.